config.py in typo-5.1

- old
+ new

@@ -1,9 +1,9 @@
 #!/usr/bin/env python
 """
  * FCKeditor - The text editor for Internet - http://www.fckeditor.net
- * Copyright (C) 2003-2007 Frederico Caldeira Knabben
+ * Copyright (C) 2003-2008 Frederico Caldeira Knabben
  *
  * == BEGIN LICENSE ==
  *
  * Licensed under the terms of any of the following licenses at your
  * choice:
@@ -17,111 +17,122 @@
  *  - Mozilla Public License Version 1.1 or later (the "MPL")
  *    http://www.mozilla.org/MPL/MPL-1.1.html
  *
  * == END LICENSE ==
  *
- * Configuration file for the File Manager Connector for Python 
+ * Configuration file for the File Manager Connector for Python
 """
 
-# INSTALLATION NOTE: You must set up your server enviroment accordingly to run 
+# INSTALLATION NOTE: You must set up your server environment accordingly to run
 # python scripts. This connector requires Python 2.4 or greater.
-# 
-# Supported operation modes: 
-#  * WSGI (recommended): You'll need apache + mod_python + modpython_gateway 
+#
+# Supported operation modes:
+#  * WSGI (recommended): You'll need apache + mod_python + modpython_gateway
 #                        or any web server capable of the WSGI python standard
-#  * Plain Old CGI:      Any server capable of running standartd python scripts
+#  * Plain Old CGI:      Any server capable of running standard python scripts
 #                        (although mod_python is recommended for performance)
 #                        This was the previous connector version operation mode
 #
-# If you're using Apache web server, replace the htaccess.txt to to .htaccess, 
+# If you're using Apache web server, replace the htaccess.txt to to .htaccess,
 # and set the proper options and paths.
 # For WSGI and mod_python, you may need to download modpython_gateway from:
-# http://projects.amor.org/misc/svn/modpython_gateway.py and copy it in this 
+# http://projects.amor.org/misc/svn/modpython_gateway.py and copy it in this
 # directory.
 
-   
-# SECURITY: You must explicitelly enable this "connector". (Set it to "True").
-# WARNING: don't just set "ConfigIsEnabled = True", you must be sure that only 
+
+# SECURITY: You must explicitly enable this "connector". (Set it to "True").
+# WARNING: don't just set "ConfigIsEnabled = True", you must be sure that only
 #		authenticated users can access this file or use some kind of session checking.
 Enabled = False
 
 # Path to user files relative to the document root.
-UserFilesPath = '/userfiles/' 
+UserFilesPath = '/userfiles/'
 
 # Fill the following value it you prefer to specify the absolute path for the
-# user files directory. Usefull if you are using a virtual directory, symbolic
+# user files directory. Useful if you are using a virtual directory, symbolic
 # link or alias. Examples: 'C:\\MySite\\userfiles\\' or '/root/mysite/userfiles/'.
 # Attention: The above 'UserFilesPath' must point to the same directory.
 # WARNING: GetRootPath may not work in virtual or mod_python configurations, and
 # may not be thread safe. Use this configuration parameter instead.
-UserFilesAbsolutePath = '' 
+UserFilesAbsolutePath = ''
 
-# Due to security issues with Apache modules, it is reccomended to leave the
+# Due to security issues with Apache modules, it is recommended to leave the
 # following setting enabled.
-ForceSingleExtension = True 
+ForceSingleExtension = True
 
 # What the user can do with this connector
-ConfigAllowedCommands = [ 'QuickUpload', 'FileUpload', 'GetFolders', 'GetFoldersAndFiles', 'CreateFolder' ] 
+ConfigAllowedCommands = [ 'QuickUpload', 'FileUpload', 'GetFolders', 'GetFoldersAndFiles', 'CreateFolder' ]
 
 # Allowed Resource Types
-ConfigAllowedTypes = ['File', 'Image', 'Flash', 'Media'] 
+ConfigAllowedTypes = ['File', 'Image', 'Flash', 'Media']
 
+# After file is uploaded, sometimes it is required to change its permissions
+# so that it was possible to access it at the later time.
+# If possible, it is recommended to set more restrictive permissions, like 0755.
+# Set to 0 to disable this feature.
+# Note: not needed on Windows-based servers.
+ChmodOnUpload = 0755
+
+# See comments above.
+# Used when creating folders that does not exist.
+ChmodOnFolderCreate = 0755
+
 # Do not touch this 3 lines, see "Configuration settings for each Resource Type"
 AllowedExtensions = {}; DeniedExtensions = {};
 FileTypesPath = {}; FileTypesAbsolutePath = {};
 QuickUploadPath = {}; QuickUploadAbsolutePath = {};
 
 #	Configuration settings for each Resource Type
 #
-#	- AllowedExtensions: the possible extensions that can be allowed. 
+#	- AllowedExtensions: the possible extensions that can be allowed.
 #		If it is empty then any file type can be uploaded.
-#	- DeniedExtensions: The extensions that won't be allowed. 
+#	- DeniedExtensions: The extensions that won't be allowed.
 #		If it is empty then no restrictions are done here.
 #
-#	For a file to be uploaded it has to fullfil both the AllowedExtensions
+#	For a file to be uploaded it has to fulfill both the AllowedExtensions
 #	and DeniedExtensions (that's it: not being denied) conditions.
 #
 #	- FileTypesPath: the virtual folder relative to the document root where
-#		these resources will be located. 
+#		these resources will be located.
 #		Attention: It must start and end with a slash: '/'
 #
 #	- FileTypesAbsolutePath: the physical path to the above folder. It must be
-#		an absolute path. 
+#		an absolute path.
 #		If it's an empty string then it will be autocalculated.
-#		Usefull if you are using a virtual directory, symbolic link or alias. 
+#		Useful if you are using a virtual directory, symbolic link or alias.
 #		Examples: 'C:\\MySite\\userfiles\\' or '/root/mysite/userfiles/'.
 #		Attention: The above 'FileTypesPath' must point to the same directory.
 #		Attention: It must end with a slash: '/'
 #
 #
 #	- QuickUploadPath: the virtual folder relative to the document root where
-#		these resources will be uploaded using the Upload tab in the resources 
+#		these resources will be uploaded using the Upload tab in the resources
 #		dialogs.
 #		Attention: It must start and end with a slash: '/'
 #
 #	- QuickUploadAbsolutePath: the physical path to the above folder. It must be
-#		an absolute path. 
+#		an absolute path.
 #		If it's an empty string then it will be autocalculated.
-#		Usefull if you are using a virtual directory, symbolic link or alias. 
+#		Useful if you are using a virtual directory, symbolic link or alias.
 #		Examples: 'C:\\MySite\\userfiles\\' or '/root/mysite/userfiles/'.
 #		Attention: The above 'QuickUploadPath' must point to the same directory.
 #		Attention: It must end with a slash: '/'
 
 AllowedExtensions['File'] 		= ['7z','aiff','asf','avi','bmp','csv','doc','fla','flv','gif','gz','gzip','jpeg','jpg','mid','mov','mp3','mp4','mpc','mpeg','mpg','ods','odt','pdf','png','ppt','pxd','qt','ram','rar','rm','rmi','rmvb','rtf','sdc','sitd','swf','sxc','sxw','tar','tgz','tif','tiff','txt','vsd','wav','wma','wmv','xls','xml','zip']
 DeniedExtensions['File'] 		= []
-FileTypesPath['File'] 			= UserFilesPath + 'file/' 
+FileTypesPath['File'] 			= UserFilesPath + 'file/'
 FileTypesAbsolutePath['File'] 	= (not UserFilesAbsolutePath == '') and (UserFilesAbsolutePath + 'file/') or ''
 QuickUploadPath['File']			= FileTypesPath['File']
 QuickUploadAbsolutePath['File']	= FileTypesAbsolutePath['File']
 
-AllowedExtensions['Image']		= ['bmp','gif','jpeg','jpg','png','psd','tif','tiff']
+AllowedExtensions['Image']		= ['bmp','gif','jpeg','jpg','png']
 DeniedExtensions['Image']		= []
-FileTypesPath['Image']			= UserFilesPath + 'image/' 
+FileTypesPath['Image']			= UserFilesPath + 'image/'
 FileTypesAbsolutePath['Image']	= (not UserFilesAbsolutePath == '') and UserFilesAbsolutePath + 'image/' or ''
 QuickUploadPath['Image']		= FileTypesPath['Image']
 QuickUploadAbsolutePath['Image']= FileTypesAbsolutePath['Image']
 
-AllowedExtensions['Flash']		= ['swf','fla']
+AllowedExtensions['Flash']		= ['swf','flv']
 DeniedExtensions['Flash']		= []
 FileTypesPath['Flash']			= UserFilesPath + 'flash/'
 FileTypesAbsolutePath['Flash']	= ( not UserFilesAbsolutePath == '') and UserFilesAbsolutePath + 'flash/' or ''
 QuickUploadPath['Flash']		= FileTypesPath['Flash']
 QuickUploadAbsolutePath['Flash']= FileTypesAbsolutePath['Flash']