HISTORY.markdown in tork-17.1.0 vs HISTORY.markdown in tork-18.0.0

- old
+ new

@@ -1,11 +1,52 @@ ------------------------------------------------------------------------------- -Version 17.1.0 (2012-01-30) ------------------------------------------------------------------------------- +## Version 18.0.0 (2012-02-06) -Improvements: +Alert: + * RSpec 2.8.0 and older contain [a bug]( + https://github.com/sunaku/tork/issues/31 ) where a nonzero + exit status (caused by an uncaught exception) is overridden + by RSpec's `Kernel#at_exit` handler to be zero, thereby + falsely indicating that a spec had passed. [This patch]( + https://github.com/rspec/rspec-core/pull/569/files) fixes the + problem. Thanks to Gumaro Melendez for reporting this issue. + +Major: + + * Dropped first parameter to `Tork::Config::test_file_globbers`. + + * GH-31: tork-master now emits separate exit code and info. + Update your `Tork::Config::test_event_hooks` accordingly. + + * tork/server: switch from modules to class inheritance. + + * tork/config: switch to Struct to prevent misspellings. + +Minor: + + * tork-driver now recursively expands dependent test files while globbing. + + * Extracted bookkeeping stuff from tork-driver into tork-engine component. + +Other: + + * tork/config: do not reabsorb when .tork.rb + changes. Since the configuration is loaded in + multiple processes, it is difficult to reload + the configuration on the fly without adding + significant complexity to Tork. Instead, it's + easier to accept the limitation that you must + restart Tork if you change your configuration. + + * GH-29: bump guard version requirement to v1 series. + + * Improve documentation; revise markdown; clean up. + +## Version 17.1.0 (2012-01-30) + +Minor: + * Added `Tork::Config.test_event_hooks` configuration option. * Added `tork/config/notify` configuration helper for receiving edge-triggered notifications (via libnotify, growl, or xmessage) about changes in test files' pass/fail status. @@ -16,37 +57,33 @@ * Lambda functions in `Tork::Config.test_file_globbers` can now return multiple globs in an array, in addition to just a single glob or `nil`. * Added support for the MiniTest convention of naming test files as - `test/**/test_*.rb` and `spec/**/spec_*.rb`. + `test/**/test_*.rb` and `spec/**/spec_*.rb`. (Jose Pablo Barrantes) ------------------------------------------------------------------------------- -Version 17.0.1 (2012-01-29) ------------------------------------------------------------------------------- +## Version 17.0.1 (2012-01-29) -Corrections: +Patch: * tork-herald(1) *sometimes* reported changed test files twice. * tork/driver: only whole test file runs should qualify as pass. * tork/config/cucumber: only set ARGV for `*.feature` test files. * Tork::Client::Transceiver needs to stop both TX & RX loops. -Housekeeping: +Other: * tork/driver: store test file lists in Set, not Array. * HISTORY: use single-word change-set descriptions. ------------------------------------------------------------------------------- -Version 17.0.0 (2012-01-27) ------------------------------------------------------------------------------- +## Version 17.0.0 (2012-01-27) -Divergences: +Major: * tork-herald(1) now emits batches of single-line JSON arrays instead of printing one (raw) path per line. This makes IPC uniform across Tork. * tork-master(1) now emits log_file and worker_number in status messages. @@ -56,22 +93,22 @@ * The old order was: worker_number, log_file, test_file, line_numbers. * The new order is: test_file, line_numbers, log_file, worker_number. -Improvements: +Minor: * GH-24: add `tork/config/dotlog` configuration helper to "hide" log files. (Nicolas Fouché) * GH-25: add `tork/config/logdir` configuration helper to isolate log files. (Jose Pablo Barrantes) * tork(1) now strips all whitespace from your input, in case you pressed spacebar or tab a few times, by accident, before entering your command. -Housekeeping: +Other: * tork/client: Replace write lock with queue to support SIGCHLD handler. The SIGCHLD handler in tork-master(1) can be triggered at any time, even in the middle of writing to the standard output stream! Locking access @@ -86,39 +123,35 @@ responsibility of (and access to) continually writing those outgoing items to the output stream. * README: revise instructions, reorganize document, and other improvements. ------------------------------------------------------------------------------- -Version 16.0.0 (2012-01-25) ------------------------------------------------------------------------------- +## Version 16.0.0 (2012-01-25) -Divergences: +Major: * Drop the `Tork::Config.test_name_extractor` configuration option. * Pass line numbers instead of test names to before/after fork hooks. * Pass $~ (MatchData) to `Tork::Config::test_file_globbers` functions. -Improvements: +Minor: * tork/config/cucumber: only run changed scenarios in changed features. -Housekeeping: +Other: * README: update instructions on running Tork directly from Git clone. ------------------------------------------------------------------------------- -Version 15.1.0 (2012-01-25) ------------------------------------------------------------------------------- +## Version 15.1.0 (2012-01-25) -Improvements: +Minor: * GH-19: add `tork cucumber` for running cucumber features. -Corrections: +Patch: * tork/config/rails: support Rails 2 and don't assume AR is used. (Benjamin Quorning) * tork/config: settings from configuration helpers specified in @@ -128,21 +161,19 @@ * LICENSE: give copyright to major contributors only. See <http://stackoverflow.com/questions/1497756>. Also added forgotten Luke Wendling to the list. ------------------------------------------------------------------------------- -Version 15.0.1 (2012-01-24) ------------------------------------------------------------------------------- +## Version 15.0.1 (2012-01-24) -Corrections: +Patch: * GH-21: Ruby 1.9 class_eval() is smarter than 1.8. * GH-20: forgot `require 'thread'` for Mutex class. (Jesse Cooke) -Housekeeping: +Other: * tork(1): fix shadowed variable names. (Jose Pablo Barrantes) * GH-22: fix command to build & install gem from source. @@ -154,28 +185,24 @@ * README: missed a testr => tork rename in watch cmd. * README: add tip about Guard's FS watching backends. ------------------------------------------------------------------------------- -Version 15.0.0 (2012-01-23) ------------------------------------------------------------------------------- +## Version 15.0.0 (2012-01-23) -Divergences: +Major: * This project has been renamed from TestR to Tork (test with fork) in order to better compete with rival projects, namely Spork! >:-) Credit goes to Brian D. Burns for thinking of this most succinct & awesome project name! He also created the snazzy ASCII-art logo featured in the project README. * tork(1): rename `r` command, which runs all tests, to `t`, for *t*ork. ------------------------------------------------------------------------------- -Version 14.3.0 (2012-01-20) ------------------------------------------------------------------------------- +## Version 14.3.0 (2012-01-20) -Improvements: +Minor: * testr(1): notify user while dispatching their commands. This is especially useful when the "rerun_passed_test_files" command has been dispatched but there are no passed test files, so nothing happens and from the user's perspective: TestR sucks because it's unresponsive. @@ -188,11 +215,11 @@ Thanks to Spencer Steffen for [contributing this solution]( https://github.com/sunaku/tork/issues/14#issuecomment-3539470). * testr-driver(1): document the "over" status message in manual page. -Housekeeping: +Other: * testr-driver(1): keep same herald; only replace master. * testr(1): shorten code for loop break on quit command. @@ -202,57 +229,49 @@ * Explain `$0` override at the start of bin/ scripts. * LICENSE: credit our most recent contributors. ------------------------------------------------------------------------------- -Version 14.2.0 (2012-01-16) ------------------------------------------------------------------------------- +## Version 14.2.0 (2012-01-16) -Improvements: +Minor: * Add ability to run `testr rails` without needing a `.testr.rb` file. * testr(1) no longer shows command menu at startup. Press ENTER to see it. * testr(1) now notifies you before absorbing overhead at startup. -Corrections: +Patch: * testr(1) now accepts death silently when Control-C is pressed. ------------------------------------------------------------------------------- -Version 14.1.3 (2012-01-13) ------------------------------------------------------------------------------- +## Version 14.1.3 (2012-01-13) -Corrections: +Patch: * Add support Guard v0.9.0 and newer in `testr-herald`. (Jose Pablo Barrantes) -Housekeeping: +Other: * Tighten version constraints for gem dependencies to avoid future breakages. ------------------------------------------------------------------------------- -Version 14.1.2 (2012-01-09) ------------------------------------------------------------------------------- +## Version 14.1.2 (2012-01-09) -Improvements: +Minor: * Don't consider partial test file pass as full pass. -Housekeeping: +Other: * Upgrade to binman 3 for better bundler support. ------------------------------------------------------------------------------- -Version 14.1.1 (2011-12-07) ------------------------------------------------------------------------------- +## Version 14.1.1 (2011-12-07) -Corrections: +Patch: * Do not fail when given test file no longer exists. * Make xUnit `--name` option regexp case-insensitive. @@ -260,11 +279,11 @@ see https://github.com/rspec/rspec-core/issues/445 and https://github.com/dchelimsky/rspec/issues/44 * Ruby 187 does not have Symbol#upcase() method. -Housekeeping: +Other: * README: add another SQLite3 error to known issues. Thanks to Luke Wendling for contributing this patch. * README: add a section explaining usage and theory. @@ -275,15 +294,13 @@ * Better variable naming for self-documentation. * Upgrade to binman 2.0.0 for UNIX man pages. ------------------------------------------------------------------------------- -Version 14.1.0 (2011-11-03) ------------------------------------------------------------------------------- +## Version 14.1.0 (2011-11-03) -Improvements: +Minor: * Make servers responsive to quit request (SIGTERM) from upstream. This change lets the user quit testr-master(1) while it is loading test execution overhead (which can be a lengthy, blocking operation). @@ -296,68 +313,60 @@ The single-line JSON message protocol used by these scripts is now documented in their manual pages, so you should have everything you need to create *your own custom user interface to TestR* if you wish! :-) -Corrections: +Patch: * SIGCHLD does not awaken main thread in Ruby 1.9.3p0. -Housekeeping: +Other: * Simplify watch(1) ps(1) process title monitoring. * Testr: tell user to press ENTER after command key. * README: add tip on loading factory_girl factories. ------------------------------------------------------------------------------- -Version 14.0.3 (2011-10-11) ------------------------------------------------------------------------------- +## Version 14.0.3 (2011-10-11) -Corrections: +Patch: * Forgot to migrate the `testr/config/rails` configuration helper to use the new TestR configuration parameter names. ------------------------------------------------------------------------------- -Version 14.0.2 (2011-10-11) ------------------------------------------------------------------------------- +## Version 14.0.2 (2011-10-11) -Corrections: +Patch: * Fix updating passed/failed test files bookkeeping. Once a test file failed, it was (incorrectly) always considered failed, even if it passed later on. * Do not requeue test files that are waiting to run. -Housekeeping: +Other: * Rename `*.md` files to `*.markdown` to avoid ambiguity. ------------------------------------------------------------------------------- -Version 14.0.1 (2011-10-10) ------------------------------------------------------------------------------- +## Version 14.0.1 (2011-10-10) -Corrections: +Patch: * Use blue/red for pass/fail instead of green/red to accommodate the color blind. * Incorrect test name regexp was passed down to Test::Unit. This broke focused testing, where only changed tests in a changed test file are run. -Housekeeping: +Other: * Make `testr-master` wait for killed worker processes before exiting. ------------------------------------------------------------------------------- -Version 14.0.0 (2011-10-09) ------------------------------------------------------------------------------- +## Version 14.0.0 (2011-10-09) -Divergences: +Major: * Renamed this project and its resources from test-loop to TestR. * Renamed the `reabsorb_file_globs` configuration parameter to `reabsorb_file_greps`. It now contains regular expressions. @@ -377,11 +386,11 @@ * Removed the `delay_per_iteration` and `after_each_test` configuration parameters. * Removed the `test/loop/notify` and `test-loop/coco` libraries. -Improvements: +Minor: * The file system is no longer polled to detect modified files. Instead, it is monitored for file modification events in a portable and efficient manner using the [Guard](https://github.com/guard/guard) library. @@ -391,38 +400,34 @@ * Added `overhead_load_paths`, `all_test_file_globs`, and `before_fork_hooks` configuration parameters. * Added ability to re-run passed and failed tests in the `testr` script. -Housekeeping: +Other: * The monolithic `test-loop` script has been replaced by several smaller ones that communicate with each other using single-line JSON messages via their standard input & output streams. See "Architecture" in the README. * Now using Bundler to manage development dependencies and gem packaging. ------------------------------------------------------------------------------- -Version 13.0.1 (2011-09-21) ------------------------------------------------------------------------------- +## Version 13.0.1 (2011-09-21) -Housekeeping: +Other: * Forgot to include `test/loop/coco` preset in gem package. * Forgot to mention `test/loop/parallel_tests` preset in README. ------------------------------------------------------------------------------- -Version 13.0.0 (2011-08-24) ------------------------------------------------------------------------------- +## Version 13.0.0 (2011-08-24) -Divergences: +Major: * Pass worker sequence number as the last argument to lambda functions in `Test::Loop.before_each_test` and `Test::Loop.after_each_test` arrays. -Improvements: +Minor: * In the `test/loop/rails` configuration preset: * Automatically test a controller when its model or factory is modified. @@ -434,92 +439,80 @@ * Assign rotating sequence numbers to workers so that you can handle parallel processes like connecting to separate databases better. (Corné Verbruggen) -Housekeeping: +Other: * README: move configuration presets above options. * Eliminate 1 SLOC: .rb extension used in file glob. * Turn off executable bit on loop.rb file mode. * Pass child ENV directly to exec() for atomicity. ------------------------------------------------------------------------------- -Version 12.3.1 (2011-07-19) ------------------------------------------------------------------------------- +## Version 12.3.1 (2011-07-19) -Corrections: +Patch: * Binary data could not be stored in environment variable values. -Housekeeping: +Other: * Forgot to add Jacob Helwig to the gemspec's authors list. ------------------------------------------------------------------------------- -Version 12.3.0 (2011-07-19) ------------------------------------------------------------------------------- +## Version 12.3.0 (2011-07-19) -Improvements: +Minor: * Add `Test::Loop::max_concurrent_tests` configuration parameter to limit the number of test files run concurrently (default 4). Otherwise, with large test suites, we could end up swamping the machine running the tests by forking hundreds of test files at once. (Jacob Helwig) * Rails: add matcher for `test/factories/*_factory.rb`. -Housekeeping: +Other: * ENV returns a Hash with duplicate/frozen keys/values. (Brian D. Burns) * Use Marshal to propagate resume_files to reabsorb. * Store test_files in a Set instead of an Array. ------------------------------------------------------------------------------- -Version 12.2.0 (2011-06-01) ------------------------------------------------------------------------------- +## Version 12.2.0 (2011-06-01) * Prevent empty test suite run in master process. (Brian D. Burns) * Report test execution statistics in `test/loop/notify` preset as requested by Juan G. Hurtado.. * Add `test/loop/coco` preset for integrating the [Coco code coverage library](http://lkdjiin.github.com/coco/). ------------------------------------------------------------------------------- -Version 12.1.0 (2011-04-29) ------------------------------------------------------------------------------- +## Version 12.1.0 (2011-04-29) -Improvements: +Minor: * Add `Test::Loop.delay_per_iteration` parameter to control the number of seconds (or fractions thereof) to sleep in between test-loop iterations. ------------------------------------------------------------------------------- -Version 12.0.4 (2011-04-29) ------------------------------------------------------------------------------- +## Version 12.0.4 (2011-04-29) -Corrections: +Patch: * Reabsorb overhead when user's configuration file changes. (Brian D. Burns and Daniel Pittman) * `Thread.new { system() }` really is backgrounded so `fork { system() }` is not necessary! [This issue](https://github.com/sunaku/test-loop/issues/5) was solved by upgrading to the newer 2.6.38.4-1 Linux kernel on my system. ------------------------------------------------------------------------------- -Version 12.0.3 (2011-04-25) ------------------------------------------------------------------------------- +## Version 12.0.3 (2011-04-25) -Corrections: +Patch: * Fix SIGCHLD handling and test completion reporting (Daniel Pittman). We need to reap all ready children in SIGCHLD, not just the first, and should not be reporting completion in the signal handler. @@ -569,73 +562,63 @@ * `Thread.new { system() }` is not really backgrounded so `fork()` instead! Many thanks to Brian D. Burns and Daniel Pittman for helping solve [this issue](https://github.com/sunaku/test-loop/issues/5). ------------------------------------------------------------------------------- -Version 12.0.2 (2011-04-21) ------------------------------------------------------------------------------- +## Version 12.0.2 (2011-04-21) -Corrections: +Patch: * Consider DB schema dump file as overhead in Rails. * Do not consider test factories as overhead in Rails. * Run test files when test factory files change in Rails. -Housekeeping: +Other: * Detach worker from master's terminal device sooner. -Documentation: - * All required signals must be present in irb check. * Prevent ps(1) from truncating lines to $TERM width. * Retain ps(1) column header in watch command output. * Begin parameter descriptions with the noun itself. ------------------------------------------------------------------------------- -Version 12.0.1 (2011-04-20) ------------------------------------------------------------------------------- +## Version 12.0.1 (2011-04-20) -Corrections: +Patch: * Restore support for Ruby 1.8.7. * Allow user's test execution overhead to fork. -Housekeeping: +Other: * Freeze master's ENV properly; keep resume key. * Remove completed test from running list sooner. -Documentation: - * Add instructions to check for POSIX prerequisites. * Support multiple test-loop instances in watch command. ------------------------------------------------------------------------------- -Version 12.0.0 (2011-04-19) ------------------------------------------------------------------------------- +## Version 12.0.0 (2011-04-19) -Divergences: +Major: * You must now explicitly `require 'test/loop/rails'` for Rails support because we can only *automatically* apply our Railtie (to disable class caching) after the overhead has been loaded, and by then it's too late: your models are already loaded & cached by the Rails environment. * Your tests can no longer read from the user's terminal (master's STDIN); instead they will read from an empty stream (the reading end of IO.popen). -Corrections: +Patch: * Replace threads with SIGCHLD for reporting test results. This fixes deadlock errors that sometimes occurred when the user's chosen test library tried to print something to STDOUT/STDERR (even though those @@ -644,11 +627,11 @@ Thanks to Brian D. Burns for suggesting and verifying that the use of threads to monitor workers was the culprit behind the deadlocks errors. * Ctrl-C did not raise Interrupt in my Rails 3 test suite. -Housekeeping: +Other: * Ensure a clean ENV when reabsorbing overhead. Environment variables set by your test execution overhead are not propagated to subsequent reabsorptions. (Brian D. Burns) @@ -662,42 +645,36 @@ * Further simplify `Test::Loop.run()` by higher-order programming. * Add LICENSE file to gem package. -Documentation: - * Add prerequisites section about POSIX environment. * Add tip about annihilating test-loop processes. * Fix markdown formatting. ------------------------------------------------------------------------------- -Version 11.0.1 (2011-04-14) ------------------------------------------------------------------------------- +## Version 11.0.1 (2011-04-14) -Corrections: +Patch: * Only attempt to define Railtie if the current Rails version supports it. ------------------------------------------------------------------------------- -Version 11.0.0 (2011-04-14) ------------------------------------------------------------------------------- +## Version 11.0.0 (2011-04-14) -Divergences: +Major: * The `test/loop/rails` preset has been internalized and is now applied automatically if your test execution overhead includes Ruby on Rails. -Improvements: +Minor: * If you are using Rails 3, test-loop will automatically set `config.cache_classes = false` for your test environment. (Brian D. Burns) -Corrections: +Patch: * Avoid deadlock errors when printing output from Test::Unit and MiniTest. (Brian D. Burns) `write': deadlock detected (fatal) @@ -705,15 +682,13 @@ * Signaled worker termination is neither pass nor fail. Do not treat it as a failure by printing the log file. * Ignore SIGINT in workers; only master must honor it. ------------------------------------------------------------------------------- -Version 10.0.1 (2011-04-08) ------------------------------------------------------------------------------- +## Version 10.0.1 (2011-04-08) -Corrections: +Patch: * Workers must ignore SIGTSTP, otherwise master waits forever before exiting. * Unregister trap in workers upon first reception instead of racing to @@ -721,24 +696,20 @@ * Prevent uncaught throw error on subsequent Ctrl-C. * Simpler solution for terminating loop upon Ctrl-C. ------------------------------------------------------------------------------- -Version 10.0.0 (2011-04-06) ------------------------------------------------------------------------------- +## Version 10.0.0 (2011-04-06) -Divergences: +Major: * The `Test::Loop.before_each_test` and `Test::Loop.after_each_test` parameters are arrays now. ------------------------------------------------------------------------------- -Version 9.4.0 (2011-04-06) ------------------------------------------------------------------------------- +## Version 9.4.0 (2011-04-06) -Improvements: +Minor: * Allow lambda functions in `Test::Loop.test_file_matchers` to return `nil` so that you can exclude certain tests from being executed. (Brian D. Burns) @@ -746,31 +717,29 @@ searchability. The monitoring command in the README is now simplified to the following: watch 'ps xf | grep test-loop | sed 1,3d' -Corrections: +Patch: * Skip `at_exit()` when exiting master process. This prevents an empty test from being run when exiting the loop after having processed a test/spec helper that loads the Test::Unit library. (Brian D. Burns) -Housekeeping: +Other: * Use throw/catch to break loop instead of raising SystemExit exception. * Trap SIGTERM with IGNORE/DEFAULT instead of using a closure in master. * Unregister master's custom signal handlers inside worker processes. * Separate configuration parameters into subsections in README. ------------------------------------------------------------------------------- -Version 9.3.0 (2011-04-01) ------------------------------------------------------------------------------- +## Version 9.3.0 (2011-04-01) -Improvements: +Minor: * Resume currently running tests--as well as those currently needing to be run--after reabsorbing test execution overhead. (Brian D. Burns) * Stop currently running tests (and wait for them to finish) before @@ -783,11 +752,11 @@ * Notify user when overhead changes instead of when restarting the loop. * Use ANSI clear line command to erase control-key combinations outputted by shells such as BASH and ZSH in test-loop's output. (Brian D. Burns) -Corrections: +Patch: * `@last_ran_at` was being set during every iteration of the loop. This is problematic when Ruby's `Time.now` is more precise than your filesystem's modification timestamp. For example, in the ext3 filesystem under Linux, file modification timestamps have a precision of 1 second. (Brian D. @@ -797,46 +766,38 @@ running waitall(), instead of sending SIGKILL to the entire process group. As a result, test-loop no longer exits with a non-zero status upon SIGINT. * Remove 'ansi' gem dependency. (Brian D. Burns) -Documentation: +Other: * Add tip on deleting logs for passing tests. (Brian D. Burns) * Add tip on monitoring test processes with watch(1) in README. ------------------------------------------------------------------------------- -Version 9.2.0 (2011-03-28) ------------------------------------------------------------------------------- +## Version 9.2.0 (2011-03-28) * Extract Rails-specific configuration to 'test/loop/rails' sublibrary. * Add 'test/loop/notify' sublibrary for OSD notifications on failures. ------------------------------------------------------------------------------- -Version 9.1.1 (2011-03-15) ------------------------------------------------------------------------------- +## Version 9.1.1 (2011-03-15) * $0 does not work from RubyGems wrapper executable. Thanks to Brian D. Burns for reporting this issue. * Add information about sqlite3 errors & workaround in README. ------------------------------------------------------------------------------- -Version 9.1.0 (2011-02-23) ------------------------------------------------------------------------------- +## Version 9.1.0 (2011-02-23) * Print the status of completed tests in ANSI color. * Print the failure log of failing tests to STDERR. * `$?` is not defined when Errno::ECHILD is raised. ------------------------------------------------------------------------------- -Version 9.0.1 (2011-02-18) ------------------------------------------------------------------------------- +## Version 9.0.1 (2011-02-18) * Shield normal output from control-key combos printed into the terminal. * Do not print worker PID in status messages because every test file has exactly one worker anyway. @@ -845,21 +806,17 @@ * Do not reabsorb overhead when the configuration file changes. * Add `after_each_test` example for failure-only notifications. ------------------------------------------------------------------------------- -Version 9.0.0 (2011-02-15) ------------------------------------------------------------------------------- +## Version 9.0.0 (2011-02-15) * Remove SIGUSR1 for killing worker processes. * Handle Ctrl-Z signal from the very beginning. ------------------------------------------------------------------------------- -Version 8.0.0 (2011-02-12) ------------------------------------------------------------------------------- +## Version 8.0.0 (2011-02-12) * Move configuration into `Test::Loop` object itself. * Allow loading `bin/test-loop` into IRB for testing. @@ -873,21 +830,17 @@ * Accept > 80 character lines in some cases. * Freeze more constant values against modification. ------------------------------------------------------------------------------- -Version 7.0.1 (2011-02-10) ------------------------------------------------------------------------------- +## Version 7.0.1 (2011-02-10) * Fix minitest deadlock issues with I/O redirection. * Do not signal to restart loop when overhead changes. ------------------------------------------------------------------------------- -Version 7.0.0 (2011-02-10) ------------------------------------------------------------------------------- +## Version 7.0.0 (2011-02-10) * Switch from shell-script style to modular Ruby style in the source code. This yields more lines of code, but the result is much easier to read. * Replace the `$test_loop_config` global variable with the @@ -907,13 +860,11 @@ * Send the SIGUSR1 signal to terminate workers and their subprocesses. * Break long lines at 80 characters in the source code. ------------------------------------------------------------------------------- -Version 6.0.0 (2011-02-09) ------------------------------------------------------------------------------- +## Version 6.0.0 (2011-02-09) * Only consider `{test,spec}_helper.rb` as overhead, not all `*_helper.rb`. * Give the user freedom to inspect and change the default configuration by storing it in a `$test_loop_config` global variable instead of returning @@ -926,61 +877,51 @@ * Add note about disabling class caching in Rails test environment. * Add better explanation for the `test_file_matchers` example. ------------------------------------------------------------------------------- -Version 5.0.3 (2011-01-25) ------------------------------------------------------------------------------- +## Version 5.0.3 (2011-01-25) * Use "diff/lcs" library instead of "diff" for RSpec compatibility. Thanks to millisami for reporting this bug: https://github.com/sunaku/test-loop/issues/3 * Terminate worker processes when user presses Control-C. * Reabsorb when bundler is run, not when Gemfile changes. ------------------------------------------------------------------------------- -Version 5.0.2 (2011-01-19) ------------------------------------------------------------------------------- +## Version 5.0.2 (2011-01-19) * Support string interpolations that yield empty strings in test names. * Accept extra characters before test name in test definition: * Whitespace between `def` and `test_` in traditional test methods. * Opening parenthesis between test name and test definition keyword. * Mention that diff gem is necessary for manual git clone installation. ------------------------------------------------------------------------------- -Version 5.0.1 (2011-01-18) ------------------------------------------------------------------------------- +## Version 5.0.1 (2011-01-18) * Sanitize string interpolation in parsed test names. * Remove useless use of #map; result is not reused. * Mention parallelism and revise the introduction. * DRY the mentioning of .test-loop file in README. ------------------------------------------------------------------------------- -Version 5.0.0 (2011-01-17) ------------------------------------------------------------------------------- +## Version 5.0.0 (2011-01-17) * The configuration file must now yield a Ruby hash instead of polluting the global Object private environment with instance variables. * Shortened the `:source_file_glob_to_test_file_mapping` configuration parameter name to `:test_file_matchers`. ------------------------------------------------------------------------------- -Version 4.0.1 (2011-01-14) ------------------------------------------------------------------------------- +## Version 4.0.1 (2011-01-14) * Print how much time it took to run all tests. * Do not print test file before loading because it is hard to follow parallel test execution anyway. @@ -991,13 +932,11 @@ * Use long options when passing test names in ARGV. * Only prepend lib/, test/, and spec/ to $LOAD_PATH. ------------------------------------------------------------------------------- -Version 4.0.0 (2011-01-13) ------------------------------------------------------------------------------- +## Version 4.0.0 (2011-01-13) * Only run changed tests inside changed test files. * Run tests in parallel: one worker per test file. @@ -1006,58 +945,46 @@ * Rename `@after_test_execution` to `@after_all_tests` and change its function signature. * Clean up implementation and improve documentation. ------------------------------------------------------------------------------- -Version 3.0.2 (2011-01-11) ------------------------------------------------------------------------------- +## Version 3.0.2 (2011-01-11) * Reabsorb overhead upon Gemfile changes (Rails 3). * Try to recover from all kinds of exceptions. ------------------------------------------------------------------------------- -Version 3.0.1 (2011-01-05) ------------------------------------------------------------------------------- +## Version 3.0.1 (2011-01-05) * Be resilient to $0 and ARGV being changed by tests. * Reduce pollution by making `notify()` into lambda. * Beautify markdown formatting and revise the README. ------------------------------------------------------------------------------- -Version 3.0.0 (2011-01-04) ------------------------------------------------------------------------------- +## Version 3.0.0 (2011-01-04) * Replace Rake pathmap usage with lambda functions in the `@source_file_to_test_file_mapping` hash. * Be resilient to syntax errors from loaded files. ------------------------------------------------------------------------------- -Version 2.0.2 (2011-01-02) ------------------------------------------------------------------------------- +## Version 2.0.2 (2011-01-02) * Do not print stack trace when Control-C pressed. * Reduce the amount of notifications shown to user. ------------------------------------------------------------------------------- -Version 2.0.1 (2011-01-01) ------------------------------------------------------------------------------- +## Version 2.0.1 (2011-01-01) * Fix syntax error caused by a dangling comma. Thanks to darthdeus (Jakub Arnold) for reporting [this bug]( https://github.com/sunaku/test-loop/issues#issue/1 ). * Notify user before reabsorbing overhead. ------------------------------------------------------------------------------- -Version 2.0.0 (2010-12-31) ------------------------------------------------------------------------------- +## Version 2.0.0 (2010-12-31) * Add support for loading configuration file, which allows you to define additional test file globs and mappings, from the current working directory. @@ -1066,59 +993,45 @@ * Before running tests, print out their file paths. * Automatically retry when overhead absorption fails. ------------------------------------------------------------------------------- -Version 1.2.0 (2010-11-23) ------------------------------------------------------------------------------- +## Version 1.2.0 (2010-11-23) * Notify user when absorbing overhead initially. * DRY up the repetition of Time.at(0) calculation. ------------------------------------------------------------------------------- -Version 1.1.0 (2010-11-22) ------------------------------------------------------------------------------- +## Version 1.1.0 (2010-11-22) * All `*_{test,spec}_helper.rb` files inside `test/` and `spec/` are now considered to be absorable overhead. ------------------------------------------------------------------------------- -Version 1.0.2 (2010-10-16) ------------------------------------------------------------------------------- +## Version 1.0.2 (2010-10-16) * All *_helper.rb files inside test/ and spec/ were absorbed as overhead instead of just the test_helper.rb and spec_helper.rb files. ------------------------------------------------------------------------------- -Version 1.0.1 (2010-10-16) ------------------------------------------------------------------------------- +## Version 1.0.1 (2010-10-16) * Ensure that $LOAD_PATH reflects `ruby -Ilib:test`. ------------------------------------------------------------------------------- -Version 1.0.0 (2010-10-15) ------------------------------------------------------------------------------- +## Version 1.0.0 (2010-10-15) * Remove ability to install as a Rails plugin. * Move logic from `lib/` into `bin/` to keep it simple. * Rely on $LOAD_PATH in `bin/` instead of relative paths. * Display status messages for better user interactivity. ------------------------------------------------------------------------------- -Version 0.0.2 (2010-10-11) ------------------------------------------------------------------------------- +## Version 0.0.2 (2010-10-11) * Forgot to register `bin/test-loop` as gem executable. * Revise Usage section into Invocation and Operation. ------------------------------------------------------------------------------- -Version 0.0.1 (2010-10-10) ------------------------------------------------------------------------------- +## Version 0.0.1 (2010-10-10) * First public release. Enjoy!