lib/v20180525/models.rb in tencentcloud-sdk-tke-1.0.324 vs lib/v20180525/models.rb in tencentcloud-sdk-tke-1.0.325
- old
+ new
@@ -111,24 +111,27 @@
# @type SkipValidateOptions: Array
# @param InstanceAdvancedSettingsOverrides: 参数InstanceAdvancedSettingsOverride数组用于定制化地配置各台instance，与InstanceIds顺序对应。当传入InstanceAdvancedSettingsOverrides数组时，将覆盖默认参数InstanceAdvancedSettings；当没有传入参数InstanceAdvancedSettingsOverrides时，InstanceAdvancedSettings参数对每台instance生效。
# 参数InstanceAdvancedSettingsOverride数组的长度应与InstanceIds数组一致；当长度大于InstanceIds数组长度时将报错；当长度小于InstanceIds数组时，没有对应配置的instace将使用默认配置。
# @type InstanceAdvancedSettingsOverrides: Array
+ # @param ImageId: 节点镜像（节点选项时，该参数是必传参数）
+ # @type ImageId: String
- attr_accessor :ClusterId, :InstanceIds, :InstanceAdvancedSettings, :EnhancedService, :LoginSettings, :HostName, :SecurityGroupIds, :NodePool, :SkipValidateOptions, :InstanceAdvancedSettingsOverrides
+ attr_accessor :ClusterId, :InstanceIds, :InstanceAdvancedSettings, :EnhancedService, :LoginSettings, :HostName, :SecurityGroupIds, :NodePool, :SkipValidateOptions, :InstanceAdvancedSettingsOverrides, :ImageId
- def initialize(clusterid=nil, instanceids=nil, instanceadvancedsettings=nil, enhancedservice=nil, loginsettings=nil, hostname=nil, securitygroupids=nil, nodepool=nil, skipvalidateoptions=nil, instanceadvancedsettingsoverrides=nil)
+ def initialize(clusterid=nil, instanceids=nil, instanceadvancedsettings=nil, enhancedservice=nil, loginsettings=nil, hostname=nil, securitygroupids=nil, nodepool=nil, skipvalidateoptions=nil, instanceadvancedsettingsoverrides=nil, imageid=nil)
@ClusterId = clusterid
@InstanceIds = instanceids
@InstanceAdvancedSettings = instanceadvancedsettings
@EnhancedService = enhancedservice
@LoginSettings = loginsettings
@HostName = hostname
@SecurityGroupIds = securitygroupids
@NodePool = nodepool
@SkipValidateOptions = skipvalidateoptions
@InstanceAdvancedSettingsOverrides = instanceadvancedsettingsoverrides
+ @ImageId = imageid
end
def deserialize(params)
@ClusterId = params['ClusterId']
@InstanceIds = params['InstanceIds']
@@ -157,10 +160,11 @@
instanceadvancedsettings_tmp = InstanceAdvancedSettings.new
instanceadvancedsettings_tmp.deserialize(i)
@InstanceAdvancedSettingsOverrides << instanceadvancedsettings_tmp
end
end
+ @ImageId = params['ImageId']
end
end
# AddExistedInstances返回参数结构体
class AddExistedInstancesResponse < TencentCloud::Common::AbstractModel
@@ -407,10 +411,63 @@
@Name = params['Name']
@CbsDiskId = params['CbsDiskId']
end
end
+ # CheckEdgeClusterCIDR请求参数结构体
+ class CheckEdgeClusterCIDRRequest < TencentCloud::Common::AbstractModel
+ # @param VpcId: 集群的vpc-id
+ # @type VpcId: String
+ # @param PodCIDR: 集群的pod CIDR
+ # @type PodCIDR: String
+ # @param ServiceCIDR: 集群的service CIDR
+ # @type ServiceCIDR: String
+
+ attr_accessor :VpcId, :PodCIDR, :ServiceCIDR
+
+ def initialize(vpcid=nil, podcidr=nil, servicecidr=nil)
+ @VpcId = vpcid
+ @PodCIDR = podcidr
+ @ServiceCIDR = servicecidr
+ end
+
+ def deserialize(params)
+ @VpcId = params['VpcId']
+ @PodCIDR = params['PodCIDR']
+ @ServiceCIDR = params['ServiceCIDR']
+ end
+ end
+
+ # CheckEdgeClusterCIDR返回参数结构体
+ class CheckEdgeClusterCIDRResponse < TencentCloud::Common::AbstractModel
+ # @param ConflictCode: 返回码，具体如下
+ # -1 内部错误
+ # 0 没冲突
+ # 1 vpc 和 serviceCIDR 冲突
+ # 2 vpc 和 podCIDR 冲突
+ # 3 serviceCIDR 和 podCIDR 冲突
+ # @type ConflictCode: Integer
+ # @param ConflictMsg: CIDR冲突描述信息。
+ # @type ConflictMsg: String
+ # @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
+ # @type RequestId: String
+
+ attr_accessor :ConflictCode, :ConflictMsg, :RequestId
+
+ def initialize(conflictcode=nil, conflictmsg=nil, requestid=nil)
+ @ConflictCode = conflictcode
+ @ConflictMsg = conflictmsg
+ @RequestId = requestid
+ end
+
+ def deserialize(params)
+ @ConflictCode = params['ConflictCode']
+ @ConflictMsg = params['ConflictMsg']
+ @RequestId = params['RequestId']
+ end
+ end
+
# CheckInstancesUpgradeAble请求参数结构体
class CheckInstancesUpgradeAbleRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param InstanceIds: 节点列表，空为全部节点
@@ -951,10 +1008,50 @@
@EniSubnetIds = params['EniSubnetIds']
@ClaimExpiredSeconds = params['ClaimExpiredSeconds']
end
end
+ # 集群创建过程
+ class ClusterCondition < TencentCloud::Common::AbstractModel
+ # @param Type: 集群创建过程类型
+ # @type Type: String
+ # @param Status: 集群创建过程状态
+ # @type Status: String
+ # @param LastProbeTime: 最后一次探测到该状态的时间
+ # 注意：此字段可能返回 null，表示取不到有效值。
+ # @type LastProbeTime: String
+ # @param LastTransitionTime: 最后一次转换到该过程的时间
+ # 注意：此字段可能返回 null，表示取不到有效值。
+ # @type LastTransitionTime: String
+ # @param Reason: 转换到该过程的简明原因
+ # 注意：此字段可能返回 null，表示取不到有效值。
+ # @type Reason: String
+ # @param Message: 转换到该过程的更多信息
+ # 注意：此字段可能返回 null，表示取不到有效值。
+ # @type Message: String
+
+ attr_accessor :Type, :Status, :LastProbeTime, :LastTransitionTime, :Reason, :Message
+
+ def initialize(type=nil, status=nil, lastprobetime=nil, lasttransitiontime=nil, reason=nil, message=nil)
+ @Type = type
+ @Status = status
+ @LastProbeTime = lastprobetime
+ @LastTransitionTime = lasttransitiontime
+ @Reason = reason
+ @Message = message
+ end
+
+ def deserialize(params)
+ @Type = params['Type']
+ @Status = params['Status']
+ @LastProbeTime = params['LastProbeTime']
+ @LastTransitionTime = params['LastTransitionTime']
+ @Reason = params['Reason']
+ @Message = params['Message']
+ end
+ end
+
# 接入k8s 的认证信息
class ClusterCredential < TencentCloud::Common::AbstractModel
# @param CACert: CA 根证书
# @type CACert: String
# @param Token: 认证用的Token
@@ -1676,28 +1773,34 @@
# @type Name: String
# @param Labels: Labels标签
# @type Labels: Array
# @param Taints: Taints互斥
# @type Taints: Array
+ # @param ContainerRuntime: 节点池纬度运行时类型及版本
+ # @type ContainerRuntime: String
+ # @param RuntimeVersion: 运行时版本
+ # @type RuntimeVersion: String
# @param NodePoolOs: 节点池os
# @type NodePoolOs: String
# @param OsCustomizeType: 容器的镜像版本，"DOCKER_CUSTOMIZE"(容器定制版),"GENERAL"(普通版本，默认值)
# @type OsCustomizeType: String
# @param Tags: 资源标签
# @type Tags: Array
- attr_accessor :ClusterId, :AutoScalingGroupPara, :LaunchConfigurePara, :InstanceAdvancedSettings, :EnableAutoscale, :Name, :Labels, :Taints, :NodePoolOs, :OsCustomizeType, :Tags
+ attr_accessor :ClusterId, :AutoScalingGroupPara, :LaunchConfigurePara, :InstanceAdvancedSettings, :EnableAutoscale, :Name, :Labels, :Taints, :ContainerRuntime, :RuntimeVersion, :NodePoolOs, :OsCustomizeType, :Tags
- def initialize(clusterid=nil, autoscalinggrouppara=nil, launchconfigurepara=nil, instanceadvancedsettings=nil, enableautoscale=nil, name=nil, labels=nil, taints=nil, nodepoolos=nil, oscustomizetype=nil, tags=nil)
+ def initialize(clusterid=nil, autoscalinggrouppara=nil, launchconfigurepara=nil, instanceadvancedsettings=nil, enableautoscale=nil, name=nil, labels=nil, taints=nil, containerruntime=nil, runtimeversion=nil, nodepoolos=nil, oscustomizetype=nil, tags=nil)
@ClusterId = clusterid
@AutoScalingGroupPara = autoscalinggrouppara
@LaunchConfigurePara = launchconfigurepara
@InstanceAdvancedSettings = instanceadvancedsettings
@EnableAutoscale = enableautoscale
@Name = name
@Labels = labels
@Taints = taints
+ @ContainerRuntime = containerruntime
+ @RuntimeVersion = runtimeversion
@NodePoolOs = nodepoolos
@OsCustomizeType = oscustomizetype
@Tags = tags
end
@@ -1725,10 +1828,12 @@
taint_tmp = Taint.new
taint_tmp.deserialize(i)
@Taints << taint_tmp
end
end
+ @ContainerRuntime = params['ContainerRuntime']
+ @RuntimeVersion = params['RuntimeVersion']
@NodePoolOs = params['NodePoolOs']
@OsCustomizeType = params['OsCustomizeType']
unless params['Tags'].nil?
@Tags = []
params['Tags'].each do |i|
@@ -1950,10 +2055,100 @@
def deserialize(params)
@RequestId = params['RequestId']
end
end
+ # CreateECMInstances请求参数结构体
+ class CreateECMInstancesRequest < TencentCloud::Common::AbstractModel
+ # @param ClusterID: 集群id
+ # @type ClusterID: String
+ # @param ModuleId: 模块id
+ # @type ModuleId: String
+ # @param ZoneInstanceCountISPSet: 需要创建实例的可用区及创建数目及运营商的列表
+ # @type ZoneInstanceCountISPSet: Array
+ # @param Password: 密码
+ # @type Password: String
+ # @param InternetMaxBandwidthOut: 公网带宽
+ # @type InternetMaxBandwidthOut: Integer
+ # @param ImageId: 镜像id
+ # @type ImageId: String
+ # @param InstanceName: 实例名称
+ # @type InstanceName: String
+ # @param HostName: 主机名称
+ # @type HostName: String
+ # @param EnhancedService: 增强服务，包括云镜和云监控
+ # @type EnhancedService: :class:`Tencentcloud::Tke.v20180525.models.ECMEnhancedService`
+ # @param UserData: 用户自定义脚本
+ # @type UserData: String
+ # @param External: 实例扩展信息
+ # @type External: String
+ # @param SecurityGroupIds: 实例所属安全组
+ # @type SecurityGroupIds: Array
+
+ attr_accessor :ClusterID, :ModuleId, :ZoneInstanceCountISPSet, :Password, :InternetMaxBandwidthOut, :ImageId, :InstanceName, :HostName, :EnhancedService, :UserData, :External, :SecurityGroupIds
+
+ def initialize(clusterid=nil, moduleid=nil, zoneinstancecountispset=nil, password=nil, internetmaxbandwidthout=nil, imageid=nil, instancename=nil, hostname=nil, enhancedservice=nil, userdata=nil, external=nil, securitygroupids=nil)
+ @ClusterID = clusterid
+ @ModuleId = moduleid
+ @ZoneInstanceCountISPSet = zoneinstancecountispset
+ @Password = password
+ @InternetMaxBandwidthOut = internetmaxbandwidthout
+ @ImageId = imageid
+ @InstanceName = instancename
+ @HostName = hostname
+ @EnhancedService = enhancedservice
+ @UserData = userdata
+ @External = external
+ @SecurityGroupIds = securitygroupids
+ end
+
+ def deserialize(params)
+ @ClusterID = params['ClusterID']
+ @ModuleId = params['ModuleId']
+ unless params['ZoneInstanceCountISPSet'].nil?
+ @ZoneInstanceCountISPSet = []
+ params['ZoneInstanceCountISPSet'].each do |i|
+ ecmzoneinstancecountisp_tmp = ECMZoneInstanceCountISP.new
+ ecmzoneinstancecountisp_tmp.deserialize(i)
+ @ZoneInstanceCountISPSet << ecmzoneinstancecountisp_tmp
+ end
+ end
+ @Password = params['Password']
+ @InternetMaxBandwidthOut = params['InternetMaxBandwidthOut']
+ @ImageId = params['ImageId']
+ @InstanceName = params['InstanceName']
+ @HostName = params['HostName']
+ unless params['EnhancedService'].nil?
+ @EnhancedService = ECMEnhancedService.new
+ @EnhancedService.deserialize(params['EnhancedService'])
+ end
+ @UserData = params['UserData']
+ @External = params['External']
+ @SecurityGroupIds = params['SecurityGroupIds']
+ end
+ end
+
+ # CreateECMInstances返回参数结构体
+ class CreateECMInstancesResponse < TencentCloud::Common::AbstractModel
+ # @param EcmIdSet: ecm id 列表
+ # @type EcmIdSet: Array
+ # @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
+ # @type RequestId: String
+
+ attr_accessor :EcmIdSet, :RequestId
+
+ def initialize(ecmidset=nil, requestid=nil)
+ @EcmIdSet = ecmidset
+ @RequestId = requestid
+ end
+
+ def deserialize(params)
+ @EcmIdSet = params['EcmIdSet']
+ @RequestId = params['RequestId']
+ end
+ end
+
# CreateEKSCluster请求参数结构体
class CreateEKSClusterRequest < TencentCloud::Common::AbstractModel
# @param K8SVersion: k8s版本号。可为1.14.4, 1.12.8。
# @type K8SVersion: String
# @param VpcId: vpc 的Id
@@ -2525,10 +2720,84 @@
@TemplateId = params['TemplateId']
@RequestId = params['RequestId']
end
end
+ # CreateTKEEdgeCluster请求参数结构体
+ class CreateTKEEdgeClusterRequest < TencentCloud::Common::AbstractModel
+ # @param K8SVersion: k8s版本号
+ # @type K8SVersion: String
+ # @param VpcId: vpc 的Id
+ # @type VpcId: String
+ # @param ClusterName: 集群名称
+ # @type ClusterName: String
+ # @param PodCIDR: 集群pod cidr
+ # @type PodCIDR: String
+ # @param ServiceCIDR: 集群service cidr
+ # @type ServiceCIDR: String
+ # @param ClusterDesc: 集群描述信息
+ # @type ClusterDesc: String
+ # @param ClusterAdvancedSettings: 集群高级设置
+ # @type ClusterAdvancedSettings: :class:`Tencentcloud::Tke.v20180525.models.EdgeClusterAdvancedSettings`
+ # @param MaxNodePodNum: 节点上最大Pod数量
+ # @type MaxNodePodNum: Integer
+ # @param PublicLB: 边缘计算集群公网访问LB信息
+ # @type PublicLB: :class:`Tencentcloud::Tke.v20180525.models.EdgeClusterPublicLB`
+
+ attr_accessor :K8SVersion, :VpcId, :ClusterName, :PodCIDR, :ServiceCIDR, :ClusterDesc, :ClusterAdvancedSettings, :MaxNodePodNum, :PublicLB
+
+ def initialize(k8sversion=nil, vpcid=nil, clustername=nil, podcidr=nil, servicecidr=nil, clusterdesc=nil, clusteradvancedsettings=nil, maxnodepodnum=nil, publiclb=nil)
+ @K8SVersion = k8sversion
+ @VpcId = vpcid
+ @ClusterName = clustername
+ @PodCIDR = podcidr
+ @ServiceCIDR = servicecidr
+ @ClusterDesc = clusterdesc
+ @ClusterAdvancedSettings = clusteradvancedsettings
+ @MaxNodePodNum = maxnodepodnum
+ @PublicLB = publiclb
+ end
+
+ def deserialize(params)
+ @K8SVersion = params['K8SVersion']
+ @VpcId = params['VpcId']
+ @ClusterName = params['ClusterName']
+ @PodCIDR = params['PodCIDR']
+ @ServiceCIDR = params['ServiceCIDR']
+ @ClusterDesc = params['ClusterDesc']
+ unless params['ClusterAdvancedSettings'].nil?
+ @ClusterAdvancedSettings = EdgeClusterAdvancedSettings.new
+ @ClusterAdvancedSettings.deserialize(params['ClusterAdvancedSettings'])
+ end
+ @MaxNodePodNum = params['MaxNodePodNum']
+ unless params['PublicLB'].nil?
+ @PublicLB = EdgeClusterPublicLB.new
+ @PublicLB.deserialize(params['PublicLB'])
+ end
+ end
+ end
+
+ # CreateTKEEdgeCluster返回参数结构体
+ class CreateTKEEdgeClusterResponse < TencentCloud::Common::AbstractModel
+ # @param ClusterId: 边缘计算集群Id
+ # @type ClusterId: String
+ # @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
+ # @type RequestId: String
+
+ attr_accessor :ClusterId, :RequestId
+
+ def initialize(clusterid=nil, requestid=nil)
+ @ClusterId = clusterid
+ @RequestId = requestid
+ end
+
+ def deserialize(params)
+ @ClusterId = params['ClusterId']
+ @RequestId = params['RequestId']
+ end
+ end
+
# 自定义DNS配置
class DNSConfig < TencentCloud::Common::AbstractModel
# @param Nameservers: DNS 服务器IP地址列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Nameservers: Array
@@ -2949,10 +3218,46 @@
def deserialize(params)
@RequestId = params['RequestId']
end
end
+ # DeleteECMInstances请求参数结构体
+ class DeleteECMInstancesRequest < TencentCloud::Common::AbstractModel
+ # @param ClusterID: 集群ID
+ # @type ClusterID: String
+ # @param EcmIdSet: ecm id集合
+ # @type EcmIdSet: Array
+
+ attr_accessor :ClusterID, :EcmIdSet
+
+ def initialize(clusterid=nil, ecmidset=nil)
+ @ClusterID = clusterid
+ @EcmIdSet = ecmidset
+ end
+
+ def deserialize(params)
+ @ClusterID = params['ClusterID']
+ @EcmIdSet = params['EcmIdSet']
+ end
+ end
+
+ # DeleteECMInstances返回参数结构体
+ class DeleteECMInstancesResponse < TencentCloud::Common::AbstractModel
+ # @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
+ # @type RequestId: String
+
+ attr_accessor :RequestId
+
+ def initialize(requestid=nil)
+ @RequestId = requestid
+ end
+
+ def deserialize(params)
+ @RequestId = params['RequestId']
+ end
+ end
+
# DeleteEKSCluster请求参数结构体
class DeleteEKSClusterRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 弹性集群Id
# @type ClusterId: String
@@ -3017,10 +3322,82 @@
def deserialize(params)
@RequestId = params['RequestId']
end
end
+ # DeleteEdgeCVMInstances请求参数结构体
+ class DeleteEdgeCVMInstancesRequest < TencentCloud::Common::AbstractModel
+ # @param ClusterID: 集群ID
+ # @type ClusterID: String
+ # @param CvmIdSet: cvm id集合
+ # @type CvmIdSet: Array
+
+ attr_accessor :ClusterID, :CvmIdSet
+
+ def initialize(clusterid=nil, cvmidset=nil)
+ @ClusterID = clusterid
+ @CvmIdSet = cvmidset
+ end
+
+ def deserialize(params)
+ @ClusterID = params['ClusterID']
+ @CvmIdSet = params['CvmIdSet']
+ end
+ end
+
+ # DeleteEdgeCVMInstances返回参数结构体
+ class DeleteEdgeCVMInstancesResponse < TencentCloud::Common::AbstractModel
+ # @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
+ # @type RequestId: String
+
+ attr_accessor :RequestId
+
+ def initialize(requestid=nil)
+ @RequestId = requestid
+ end
+
+ def deserialize(params)
+ @RequestId = params['RequestId']
+ end
+ end
+
+ # DeleteEdgeClusterInstances请求参数结构体
+ class DeleteEdgeClusterInstancesRequest < TencentCloud::Common::AbstractModel
+ # @param ClusterId: 集群ID
+ # @type ClusterId: String
+ # @param InstanceIds: 待删除实例ID数组
+ # @type InstanceIds: Array
+
+ attr_accessor :ClusterId, :InstanceIds
+
+ def initialize(clusterid=nil, instanceids=nil)
+ @ClusterId = clusterid
+ @InstanceIds = instanceids
+ end
+
+ def deserialize(params)
+ @ClusterId = params['ClusterId']
+ @InstanceIds = params['InstanceIds']
+ end
+ end
+
+ # DeleteEdgeClusterInstances返回参数结构体
+ class DeleteEdgeClusterInstancesResponse < TencentCloud::Common::AbstractModel
+ # @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
+ # @type RequestId: String
+
+ attr_accessor :RequestId
+
+ def initialize(requestid=nil)
+ @RequestId = requestid
+ end
+
+ def deserialize(params)
+ @RequestId = params['RequestId']
+ end
+ end
+
# DeleteImageCaches请求参数结构体
class DeleteImageCachesRequest < TencentCloud::Common::AbstractModel
# @param ImageCacheIds: 镜像缓存Id数组
# @type ImageCacheIds: Array
@@ -3275,10 +3652,42 @@
def deserialize(params)
@RequestId = params['RequestId']
end
end
+ # DeleteTKEEdgeCluster请求参数结构体
+ class DeleteTKEEdgeClusterRequest < TencentCloud::Common::AbstractModel
+ # @param ClusterId: 集群ID
+ # @type ClusterId: String
+
+ attr_accessor :ClusterId
+
+ def initialize(clusterid=nil)
+ @ClusterId = clusterid
+ end
+
+ def deserialize(params)
+ @ClusterId = params['ClusterId']
+ end
+ end
+
+ # DeleteTKEEdgeCluster返回参数结构体
+ class DeleteTKEEdgeClusterResponse < TencentCloud::Common::AbstractModel
+ # @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
+ # @type RequestId: String
+
+ attr_accessor :RequestId
+
+ def initialize(requestid=nil)
+ @RequestId = requestid
+ end
+
+ def deserialize(params)
+ @RequestId = params['RequestId']
+ end
+ end
+
# DescribeAvailableClusterVersion请求参数结构体
class DescribeAvailableClusterVersionRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群 Id
# @type ClusterId: String
# @param ClusterIds: 集群 Id 列表
@@ -3328,10 +3737,41 @@
end
@RequestId = params['RequestId']
end
end
+ # DescribeAvailableTKEEdgeVersion请求参数结构体
+ class DescribeAvailableTKEEdgeVersionRequest < TencentCloud::Common::AbstractModel
+
+
+ def initialize()
+ end
+
+ def deserialize(params)
+ end
+ end
+
+ # DescribeAvailableTKEEdgeVersion返回参数结构体
+ class DescribeAvailableTKEEdgeVersionResponse < TencentCloud::Common::AbstractModel
+ # @param Versions: 版本列表
+ # @type Versions: Array
+ # @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
+ # @type RequestId: String
+
+ attr_accessor :Versions, :RequestId
+
+ def initialize(versions=nil, requestid=nil)
+ @Versions = versions
+ @RequestId = requestid
+ end
+
+ def deserialize(params)
+ @Versions = params['Versions']
+ @RequestId = params['RequestId']
+ end
+ end
+
# DescribeClusterAsGroupOption请求参数结构体
class DescribeClusterAsGroupOptionRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
@@ -4324,10 +4764,62 @@
end
@RequestId = params['RequestId']
end
end
+ # DescribeECMInstances请求参数结构体
+ class DescribeECMInstancesRequest < TencentCloud::Common::AbstractModel
+ # @param ClusterID: 集群id
+ # @type ClusterID: String
+ # @param Filters: 过滤条件
+ # 仅支持ecm-id过滤
+ # @type Filters: Array
+
+ attr_accessor :ClusterID, :Filters
+
+ def initialize(clusterid=nil, filters=nil)
+ @ClusterID = clusterid
+ @Filters = filters
+ end
+
+ def deserialize(params)
+ @ClusterID = params['ClusterID']
+ unless params['Filters'].nil?
+ @Filters = []
+ params['Filters'].each do |i|
+ filter_tmp = Filter.new
+ filter_tmp.deserialize(i)
+ @Filters << filter_tmp
+ end
+ end
+ end
+ end
+
+ # DescribeECMInstances返回参数结构体
+ class DescribeECMInstancesResponse < TencentCloud::Common::AbstractModel
+ # @param TotalCount: 返回的实例相关信息列表的长度
+ # @type TotalCount: Integer
+ # @param InstanceInfoSet: 返回的实例相关信息列表
+ # @type InstanceInfoSet: Array
+ # @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
+ # @type RequestId: String
+
+ attr_accessor :TotalCount, :InstanceInfoSet, :RequestId
+
+ def initialize(totalcount=nil, instanceinfoset=nil, requestid=nil)
+ @TotalCount = totalcount
+ @InstanceInfoSet = instanceinfoset
+ @RequestId = requestid
+ end
+
+ def deserialize(params)
+ @TotalCount = params['TotalCount']
+ @InstanceInfoSet = params['InstanceInfoSet']
+ @RequestId = params['RequestId']
+ end
+ end
+
# DescribeEKSClusterCredential请求参数结构体
class DescribeEKSClusterCredentialRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群Id
# @type ClusterId: String
@@ -4643,10 +5135,206 @@
end
@RequestId = params['RequestId']
end
end
+ # DescribeEdgeAvailableExtraArgs请求参数结构体
+ class DescribeEdgeAvailableExtraArgsRequest < TencentCloud::Common::AbstractModel
+ # @param ClusterVersion: 集群版本
+ # @type ClusterVersion: String
+
+ attr_accessor :ClusterVersion
+
+ def initialize(clusterversion=nil)
+ @ClusterVersion = clusterversion
+ end
+
+ def deserialize(params)
+ @ClusterVersion = params['ClusterVersion']
+ end
+ end
+
+ # DescribeEdgeAvailableExtraArgs返回参数结构体
+ class DescribeEdgeAvailableExtraArgsResponse < TencentCloud::Common::AbstractModel
+ # @param ClusterVersion: 集群版本
+ # 注意：此字段可能返回 null，表示取不到有效值。
+ # @type ClusterVersion: String
+ # @param AvailableExtraArgs: 可用的自定义参数
+ # 注意：此字段可能返回 null，表示取不到有效值。
+ # @type AvailableExtraArgs: :class:`Tencentcloud::Tke.v20180525.models.EdgeAvailableExtraArgs`
+ # @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
+ # @type RequestId: String
+
+ attr_accessor :ClusterVersion, :AvailableExtraArgs, :RequestId
+
+ def initialize(clusterversion=nil, availableextraargs=nil, requestid=nil)
+ @ClusterVersion = clusterversion
+ @AvailableExtraArgs = availableextraargs
+ @RequestId = requestid
+ end
+
+ def deserialize(params)
+ @ClusterVersion = params['ClusterVersion']
+ unless params['AvailableExtraArgs'].nil?
+ @AvailableExtraArgs = EdgeAvailableExtraArgs.new
+ @AvailableExtraArgs.deserialize(params['AvailableExtraArgs'])
+ end
+ @RequestId = params['RequestId']
+ end
+ end
+
+ # DescribeEdgeCVMInstances请求参数结构体
+ class DescribeEdgeCVMInstancesRequest < TencentCloud::Common::AbstractModel
+ # @param ClusterID: 集群id
+ # @type ClusterID: String
+ # @param Filters: 过滤条件
+ # 仅支持cvm-id过滤
+ # @type Filters: Array
+
+ attr_accessor :ClusterID, :Filters
+
+ def initialize(clusterid=nil, filters=nil)
+ @ClusterID = clusterid
+ @Filters = filters
+ end
+
+ def deserialize(params)
+ @ClusterID = params['ClusterID']
+ unless params['Filters'].nil?
+ @Filters = []
+ params['Filters'].each do |i|
+ filter_tmp = Filter.new
+ filter_tmp.deserialize(i)
+ @Filters << filter_tmp
+ end
+ end
+ end
+ end
+
+ # DescribeEdgeCVMInstances返回参数结构体
+ class DescribeEdgeCVMInstancesResponse < TencentCloud::Common::AbstractModel
+ # @param TotalCount: 返回的实例相关信息列表的长度
+ # @type TotalCount: Integer
+ # @param InstanceInfoSet: 返回的实例相关信息列表
+ # @type InstanceInfoSet: Array
+ # @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
+ # @type RequestId: String
+
+ attr_accessor :TotalCount, :InstanceInfoSet, :RequestId
+
+ def initialize(totalcount=nil, instanceinfoset=nil, requestid=nil)
+ @TotalCount = totalcount
+ @InstanceInfoSet = instanceinfoset
+ @RequestId = requestid
+ end
+
+ def deserialize(params)
+ @TotalCount = params['TotalCount']
+ @InstanceInfoSet = params['InstanceInfoSet']
+ @RequestId = params['RequestId']
+ end
+ end
+
+ # DescribeEdgeClusterExtraArgs请求参数结构体
+ class DescribeEdgeClusterExtraArgsRequest < TencentCloud::Common::AbstractModel
+ # @param ClusterId: 集群ID
+ # @type ClusterId: String
+
+ attr_accessor :ClusterId
+
+ def initialize(clusterid=nil)
+ @ClusterId = clusterid
+ end
+
+ def deserialize(params)
+ @ClusterId = params['ClusterId']
+ end
+ end
+
+ # DescribeEdgeClusterExtraArgs返回参数结构体
+ class DescribeEdgeClusterExtraArgsResponse < TencentCloud::Common::AbstractModel
+ # @param ClusterExtraArgs: 集群自定义参数
+ # 注意：此字段可能返回 null，表示取不到有效值。
+ # @type ClusterExtraArgs: :class:`Tencentcloud::Tke.v20180525.models.EdgeClusterExtraArgs`
+ # @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
+ # @type RequestId: String
+
+ attr_accessor :ClusterExtraArgs, :RequestId
+
+ def initialize(clusterextraargs=nil, requestid=nil)
+ @ClusterExtraArgs = clusterextraargs
+ @RequestId = requestid
+ end
+
+ def deserialize(params)
+ unless params['ClusterExtraArgs'].nil?
+ @ClusterExtraArgs = EdgeClusterExtraArgs.new
+ @ClusterExtraArgs.deserialize(params['ClusterExtraArgs'])
+ end
+ @RequestId = params['RequestId']
+ end
+ end
+
+ # DescribeEdgeClusterInstances请求参数结构体
+ class DescribeEdgeClusterInstancesRequest < TencentCloud::Common::AbstractModel
+ # @param ClusterID: 集群id
+ # @type ClusterID: String
+ # @param Limit: 查询总数
+ # @type Limit: Integer
+ # @param Offset: 偏移量
+ # @type Offset: Integer
+ # @param Filters: 过滤条件，仅支持NodeName过滤
+ # @type Filters: Array
+
+ attr_accessor :ClusterID, :Limit, :Offset, :Filters
+
+ def initialize(clusterid=nil, limit=nil, offset=nil, filters=nil)
+ @ClusterID = clusterid
+ @Limit = limit
+ @Offset = offset
+ @Filters = filters
+ end
+
+ def deserialize(params)
+ @ClusterID = params['ClusterID']
+ @Limit = params['Limit']
+ @Offset = params['Offset']
+ unless params['Filters'].nil?
+ @Filters = []
+ params['Filters'].each do |i|
+ filter_tmp = Filter.new
+ filter_tmp.deserialize(i)
+ @Filters << filter_tmp
+ end
+ end
+ end
+ end
+
+ # DescribeEdgeClusterInstances返回参数结构体
+ class DescribeEdgeClusterInstancesResponse < TencentCloud::Common::AbstractModel
+ # @param TotalCount: 该集群总数
+ # @type TotalCount: Integer
+ # @param InstanceInfoSet: 节点信息集合
+ # @type InstanceInfoSet: String
+ # @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
+ # @type RequestId: String
+
+ attr_accessor :TotalCount, :InstanceInfoSet, :RequestId
+
+ def initialize(totalcount=nil, instanceinfoset=nil, requestid=nil)
+ @TotalCount = totalcount
+ @InstanceInfoSet = instanceinfoset
+ @RequestId = requestid
+ end
+
+ def deserialize(params)
+ @TotalCount = params['TotalCount']
+ @InstanceInfoSet = params['InstanceInfoSet']
+ @RequestId = params['RequestId']
+ end
+ end
+
# DescribeEksContainerInstanceLog请求参数结构体
class DescribeEksContainerInstanceLogRequest < TencentCloud::Common::AbstractModel
# @param EksCiId: Eks Container Instance Id，即容器实例Id
# @type EksCiId: String
# @param ContainerName: 容器名称，单容器的实例可选填。如果为多容器实例，请指定容器名称。
@@ -6088,10 +6776,241 @@
end
@RequestId = params['RequestId']
end
end
+ # DescribeTKEEdgeClusterCredential请求参数结构体
+ class DescribeTKEEdgeClusterCredentialRequest < TencentCloud::Common::AbstractModel
+ # @param ClusterId: 集群Id
+ # @type ClusterId: String
+
+ attr_accessor :ClusterId
+
+ def initialize(clusterid=nil)
+ @ClusterId = clusterid
+ end
+
+ def deserialize(params)
+ @ClusterId = params['ClusterId']
+ end
+ end
+
+ # DescribeTKEEdgeClusterCredential返回参数结构体
+ class DescribeTKEEdgeClusterCredentialResponse < TencentCloud::Common::AbstractModel
+ # @param Addresses: 集群的接入地址信息
+ # 注意：此字段可能返回 null，表示取不到有效值。
+ # @type Addresses: Array
+ # @param Credential: 集群的认证信息
+ # @type Credential: :class:`Tencentcloud::Tke.v20180525.models.ClusterCredential`
+ # @param PublicLB: 集群的公网访问信息
+ # @type PublicLB: :class:`Tencentcloud::Tke.v20180525.models.EdgeClusterPublicLB`
+ # @param InternalLB: 集群的内网访问信息
+ # @type InternalLB: :class:`Tencentcloud::Tke.v20180525.models.EdgeClusterInternalLB`
+ # @param CoreDns: 集群的CoreDns部署信息
+ # @type CoreDns: String
+ # @param HealthRegion: 集群的健康检查多地域部署信息
+ # @type HealthRegion: String
+ # @param Health: 集群的健康检查部署信息
+ # @type Health: String
+ # @param GridDaemon: 是否部署GridDaemon以支持headless service
+ # @type GridDaemon: String
+ # @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
+ # @type RequestId: String
+
+ attr_accessor :Addresses, :Credential, :PublicLB, :InternalLB, :CoreDns, :HealthRegion, :Health, :GridDaemon, :RequestId
+
+ def initialize(addresses=nil, credential=nil, publiclb=nil, internallb=nil, coredns=nil, healthregion=nil, health=nil, griddaemon=nil, requestid=nil)
+ @Addresses = addresses
+ @Credential = credential
+ @PublicLB = publiclb
+ @InternalLB = internallb
+ @CoreDns = coredns
+ @HealthRegion = healthregion
+ @Health = health
+ @GridDaemon = griddaemon
+ @RequestId = requestid
+ end
+
+ def deserialize(params)
+ unless params['Addresses'].nil?
+ @Addresses = []
+ params['Addresses'].each do |i|
+ ipaddress_tmp = IPAddress.new
+ ipaddress_tmp.deserialize(i)
+ @Addresses << ipaddress_tmp
+ end
+ end
+ unless params['Credential'].nil?
+ @Credential = ClusterCredential.new
+ @Credential.deserialize(params['Credential'])
+ end
+ unless params['PublicLB'].nil?
+ @PublicLB = EdgeClusterPublicLB.new
+ @PublicLB.deserialize(params['PublicLB'])
+ end
+ unless params['InternalLB'].nil?
+ @InternalLB = EdgeClusterInternalLB.new
+ @InternalLB.deserialize(params['InternalLB'])
+ end
+ @CoreDns = params['CoreDns']
+ @HealthRegion = params['HealthRegion']
+ @Health = params['Health']
+ @GridDaemon = params['GridDaemon']
+ @RequestId = params['RequestId']
+ end
+ end
+
+ # DescribeTKEEdgeClusterStatus请求参数结构体
+ class DescribeTKEEdgeClusterStatusRequest < TencentCloud::Common::AbstractModel
+ # @param ClusterId: 边缘计算容器集群Id
+ # @type ClusterId: String
+
+ attr_accessor :ClusterId
+
+ def initialize(clusterid=nil)
+ @ClusterId = clusterid
+ end
+
+ def deserialize(params)
+ @ClusterId = params['ClusterId']
+ end
+ end
+
+ # DescribeTKEEdgeClusterStatus返回参数结构体
+ class DescribeTKEEdgeClusterStatusResponse < TencentCloud::Common::AbstractModel
+ # @param Phase: 集群当前状态
+ # @type Phase: String
+ # @param Conditions: 集群过程数组
+ # @type Conditions: Array
+ # @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
+ # @type RequestId: String
+
+ attr_accessor :Phase, :Conditions, :RequestId
+
+ def initialize(phase=nil, conditions=nil, requestid=nil)
+ @Phase = phase
+ @Conditions = conditions
+ @RequestId = requestid
+ end
+
+ def deserialize(params)
+ @Phase = params['Phase']
+ unless params['Conditions'].nil?
+ @Conditions = []
+ params['Conditions'].each do |i|
+ clustercondition_tmp = ClusterCondition.new
+ clustercondition_tmp.deserialize(i)
+ @Conditions << clustercondition_tmp
+ end
+ end
+ @RequestId = params['RequestId']
+ end
+ end
+
+ # DescribeTKEEdgeClusters请求参数结构体
+ class DescribeTKEEdgeClustersRequest < TencentCloud::Common::AbstractModel
+ # @param ClusterIds: 集群ID列表(为空时，
+ # 表示获取账号下所有集群)
+ # @type ClusterIds: Array
+ # @param Offset: 偏移量,默认0
+ # @type Offset: Integer
+ # @param Limit: 最大输出条数，默认20
+ # @type Limit: Integer
+ # @param Filters: 过滤条件,当前只支持按照单个条件ClusterName进行过滤
+ # @type Filters: Array
+
+ attr_accessor :ClusterIds, :Offset, :Limit, :Filters
+
+ def initialize(clusterids=nil, offset=nil, limit=nil, filters=nil)
+ @ClusterIds = clusterids
+ @Offset = offset
+ @Limit = limit
+ @Filters = filters
+ end
+
+ def deserialize(params)
+ @ClusterIds = params['ClusterIds']
+ @Offset = params['Offset']
+ @Limit = params['Limit']
+ unless params['Filters'].nil?
+ @Filters = []
+ params['Filters'].each do |i|
+ filter_tmp = Filter.new
+ filter_tmp.deserialize(i)
+ @Filters << filter_tmp
+ end
+ end
+ end
+ end
+
+ # DescribeTKEEdgeClusters返回参数结构体
+ class DescribeTKEEdgeClustersResponse < TencentCloud::Common::AbstractModel
+ # @param TotalCount: 集群总个数
+ # @type TotalCount: Integer
+ # @param Clusters: 集群信息列表
+ # @type Clusters: Array
+ # @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
+ # @type RequestId: String
+
+ attr_accessor :TotalCount, :Clusters, :RequestId
+
+ def initialize(totalcount=nil, clusters=nil, requestid=nil)
+ @TotalCount = totalcount
+ @Clusters = clusters
+ @RequestId = requestid
+ end
+
+ def deserialize(params)
+ @TotalCount = params['TotalCount']
+ unless params['Clusters'].nil?
+ @Clusters = []
+ params['Clusters'].each do |i|
+ edgecluster_tmp = EdgeCluster.new
+ edgecluster_tmp.deserialize(i)
+ @Clusters << edgecluster_tmp
+ end
+ end
+ @RequestId = params['RequestId']
+ end
+ end
+
+ # DescribeTKEEdgeExternalKubeconfig请求参数结构体
+ class DescribeTKEEdgeExternalKubeconfigRequest < TencentCloud::Common::AbstractModel
+ # @param ClusterId: 集群id
+ # @type ClusterId: String
+
+ attr_accessor :ClusterId
+
+ def initialize(clusterid=nil)
+ @ClusterId = clusterid
+ end
+
+ def deserialize(params)
+ @ClusterId = params['ClusterId']
+ end
+ end
+
+ # DescribeTKEEdgeExternalKubeconfig返回参数结构体
+ class DescribeTKEEdgeExternalKubeconfigResponse < TencentCloud::Common::AbstractModel
+ # @param Kubeconfig: kubeconfig文件内容
+ # @type Kubeconfig: String
+ # @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
+ # @type RequestId: String
+
+ attr_accessor :Kubeconfig, :RequestId
+
+ def initialize(kubeconfig=nil, requestid=nil)
+ @Kubeconfig = kubeconfig
+ @RequestId = requestid
+ end
+
+ def deserialize(params)
+ @Kubeconfig = params['Kubeconfig']
+ @RequestId = params['RequestId']
+ end
+ end
+
# DescribeTKEEdgeScript请求参数结构体
class DescribeTKEEdgeScriptRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群id
# @type ClusterId: String
# @param Interface: 网卡名
@@ -6381,10 +7300,341 @@
@Domain = params['Domain']
@DnsServers = params['DnsServers']
end
end
+ # ECM增强服务
+ class ECMEnhancedService < TencentCloud::Common::AbstractModel
+ # @param SecurityService: 是否开启云监控服务
+ # @type SecurityService: :class:`Tencentcloud::Tke.v20180525.models.ECMRunMonitorServiceEnabled`
+ # @param MonitorService: 是否开启云镜服务
+ # @type MonitorService: :class:`Tencentcloud::Tke.v20180525.models.ECMRunSecurityServiceEnabled`
+
+ attr_accessor :SecurityService, :MonitorService
+
+ def initialize(securityservice=nil, monitorservice=nil)
+ @SecurityService = securityservice
+ @MonitorService = monitorservice
+ end
+
+ def deserialize(params)
+ unless params['SecurityService'].nil?
+ @SecurityService = ECMRunMonitorServiceEnabled.new
+ @SecurityService.deserialize(params['SecurityService'])
+ end
+ unless params['MonitorService'].nil?
+ @MonitorService = ECMRunSecurityServiceEnabled.new
+ @MonitorService.deserialize(params['MonitorService'])
+ end
+ end
+ end
+
+ # ECM云监控服务
+ class ECMRunMonitorServiceEnabled < TencentCloud::Common::AbstractModel
+ # @param Enabled: 是否开启
+ # @type Enabled: Boolean
+
+ attr_accessor :Enabled
+
+ def initialize(enabled=nil)
+ @Enabled = enabled
+ end
+
+ def deserialize(params)
+ @Enabled = params['Enabled']
+ end
+ end
+
+ # ECM云镜服务
+ class ECMRunSecurityServiceEnabled < TencentCloud::Common::AbstractModel
+ # @param Enabled: 是否开启
+ # @type Enabled: Boolean
+ # @param Version: 云镜版本：0 基础版，1 专业版
+ # @type Version: Integer
+
+ attr_accessor :Enabled, :Version
+
+ def initialize(enabled=nil, version=nil)
+ @Enabled = enabled
+ @Version = version
+ end
+
+ def deserialize(params)
+ @Enabled = params['Enabled']
+ @Version = params['Version']
+ end
+ end
+
+ # ECM实例可用区及对应的实例创建数目及运营商的组合
+ class ECMZoneInstanceCountISP < TencentCloud::Common::AbstractModel
+ # @param Zone: 创建实例的可用区
+ # @type Zone: String
+ # @param InstanceCount: 在当前可用区欲创建的实例数目
+ # @type InstanceCount: Integer
+ # @param ISP: 运营商
+ # @type ISP: String
+
+ attr_accessor :Zone, :InstanceCount, :ISP
+
+ def initialize(zone=nil, instancecount=nil, isp=nil)
+ @Zone = zone
+ @InstanceCount = instancecount
+ @ISP = isp
+ end
+
+ def deserialize(params)
+ @Zone = params['Zone']
+ @InstanceCount = params['InstanceCount']
+ @ISP = params['ISP']
+ end
+ end
+
+ # 边缘容器参数描述
+ class EdgeArgsFlag < TencentCloud::Common::AbstractModel
+ # @param Name: 参数名
+ # 注意：此字段可能返回 null，表示取不到有效值。
+ # @type Name: String
+ # @param Type: 参数类型
+ # 注意：此字段可能返回 null，表示取不到有效值。
+ # @type Type: String
+ # @param Usage: 参数描述
+ # 注意：此字段可能返回 null，表示取不到有效值。
+ # @type Usage: String
+ # @param Default: 参数默认值
+ # 注意：此字段可能返回 null，表示取不到有效值。
+ # @type Default: String
+ # @param Constraint: 参数可选范围（目前包含range和in两种，"[]"代表range，如"[1, 5]"表示参数必须>=1且 <=5, "()"代表in， 如"('aa', 'bb')"表示参数只能为字符串'aa'或者'bb'，该参数为空表示不校验）
+ # 注意：此字段可能返回 null，表示取不到有效值。
+ # @type Constraint: String
+
+ attr_accessor :Name, :Type, :Usage, :Default, :Constraint
+
+ def initialize(name=nil, type=nil, usage=nil, default=nil, constraint=nil)
+ @Name = name
+ @Type = type
+ @Usage = usage
+ @Default = default
+ @Constraint = constraint
+ end
+
+ def deserialize(params)
+ @Name = params['Name']
+ @Type = params['Type']
+ @Usage = params['Usage']
+ @Default = params['Default']
+ @Constraint = params['Constraint']
+ end
+ end
+
+ # 边缘容器集群可用的自定义参数
+ class EdgeAvailableExtraArgs < TencentCloud::Common::AbstractModel
+ # @param KubeAPIServer: kube-apiserver可用的自定义参数
+ # 注意：此字段可能返回 null，表示取不到有效值。
+ # @type KubeAPIServer: Array
+ # @param KubeControllerManager: kube-controller-manager可用的自定义参数
+ # 注意：此字段可能返回 null，表示取不到有效值。
+ # @type KubeControllerManager: Array
+ # @param KubeScheduler: kube-scheduler可用的自定义参数
+ # 注意：此字段可能返回 null，表示取不到有效值。
+ # @type KubeScheduler: Array
+ # @param Kubelet: kubelet可用的自定义参数
+ # 注意：此字段可能返回 null，表示取不到有效值。
+ # @type Kubelet: Array
+
+ attr_accessor :KubeAPIServer, :KubeControllerManager, :KubeScheduler, :Kubelet
+
+ def initialize(kubeapiserver=nil, kubecontrollermanager=nil, kubescheduler=nil, kubelet=nil)
+ @KubeAPIServer = kubeapiserver
+ @KubeControllerManager = kubecontrollermanager
+ @KubeScheduler = kubescheduler
+ @Kubelet = kubelet
+ end
+
+ def deserialize(params)
+ unless params['KubeAPIServer'].nil?
+ @KubeAPIServer = []
+ params['KubeAPIServer'].each do |i|
+ edgeargsflag_tmp = EdgeArgsFlag.new
+ edgeargsflag_tmp.deserialize(i)
+ @KubeAPIServer << edgeargsflag_tmp
+ end
+ end
+ unless params['KubeControllerManager'].nil?
+ @KubeControllerManager = []
+ params['KubeControllerManager'].each do |i|
+ edgeargsflag_tmp = EdgeArgsFlag.new
+ edgeargsflag_tmp.deserialize(i)
+ @KubeControllerManager << edgeargsflag_tmp
+ end
+ end
+ unless params['KubeScheduler'].nil?
+ @KubeScheduler = []
+ params['KubeScheduler'].each do |i|
+ edgeargsflag_tmp = EdgeArgsFlag.new
+ edgeargsflag_tmp.deserialize(i)
+ @KubeScheduler << edgeargsflag_tmp
+ end
+ end
+ unless params['Kubelet'].nil?
+ @Kubelet = []
+ params['Kubelet'].each do |i|
+ edgeargsflag_tmp = EdgeArgsFlag.new
+ edgeargsflag_tmp.deserialize(i)
+ @Kubelet << edgeargsflag_tmp
+ end
+ end
+ end
+ end
+
+ # 边缘计算集群信息
+ class EdgeCluster < TencentCloud::Common::AbstractModel
+ # @param ClusterId: 集群Id
+ # @type ClusterId: String
+ # @param ClusterName: 集群名称
+ # @type ClusterName: String
+ # @param VpcId: Vpc Id
+ # @type VpcId: String
+ # @param PodCIDR: 集群pod cidr
+ # @type PodCIDR: String
+ # @param ServiceCIDR: 集群 service cidr
+ # @type ServiceCIDR: String
+ # @param K8SVersion: k8s 版本号
+ # @type K8SVersion: String
+ # @param Status: 集群状态
+ # @type Status: String
+ # @param ClusterDesc: 集群描述信息
+ # @type ClusterDesc: String
+ # @param CreatedTime: 集群创建时间
+ # @type CreatedTime: String
+ # @param EdgeClusterVersion: 边缘集群版本
+ # @type EdgeClusterVersion: String
+ # @param MaxNodePodNum: 节点最大Pod数
+ # 注意：此字段可能返回 null，表示取不到有效值。
+ # @type MaxNodePodNum: Integer
+
+ attr_accessor :ClusterId, :ClusterName, :VpcId, :PodCIDR, :ServiceCIDR, :K8SVersion, :Status, :ClusterDesc, :CreatedTime, :EdgeClusterVersion, :MaxNodePodNum
+
+ def initialize(clusterid=nil, clustername=nil, vpcid=nil, podcidr=nil, servicecidr=nil, k8sversion=nil, status=nil, clusterdesc=nil, createdtime=nil, edgeclusterversion=nil, maxnodepodnum=nil)
+ @ClusterId = clusterid
+ @ClusterName = clustername
+ @VpcId = vpcid
+ @PodCIDR = podcidr
+ @ServiceCIDR = servicecidr
+ @K8SVersion = k8sversion
+ @Status = status
+ @ClusterDesc = clusterdesc
+ @CreatedTime = createdtime
+ @EdgeClusterVersion = edgeclusterversion
+ @MaxNodePodNum = maxnodepodnum
+ end
+
+ def deserialize(params)
+ @ClusterId = params['ClusterId']
+ @ClusterName = params['ClusterName']
+ @VpcId = params['VpcId']
+ @PodCIDR = params['PodCIDR']
+ @ServiceCIDR = params['ServiceCIDR']
+ @K8SVersion = params['K8SVersion']
+ @Status = params['Status']
+ @ClusterDesc = params['ClusterDesc']
+ @CreatedTime = params['CreatedTime']
+ @EdgeClusterVersion = params['EdgeClusterVersion']
+ @MaxNodePodNum = params['MaxNodePodNum']
+ end
+ end
+
+ # 边缘容器集群高级配置
+ class EdgeClusterAdvancedSettings < TencentCloud::Common::AbstractModel
+ # @param ExtraArgs: 集群自定义参数
+ # 注意：此字段可能返回 null，表示取不到有效值。
+ # @type ExtraArgs: :class:`Tencentcloud::Tke.v20180525.models.EdgeClusterExtraArgs`
+
+ attr_accessor :ExtraArgs
+
+ def initialize(extraargs=nil)
+ @ExtraArgs = extraargs
+ end
+
+ def deserialize(params)
+ unless params['ExtraArgs'].nil?
+ @ExtraArgs = EdgeClusterExtraArgs.new
+ @ExtraArgs.deserialize(params['ExtraArgs'])
+ end
+ end
+ end
+
+ # 边缘容器集群master自定义参数
+ class EdgeClusterExtraArgs < TencentCloud::Common::AbstractModel
+ # @param KubeAPIServer: kube-apiserver自定义参数，参数格式为["k1=v1", "k1=v2"]， 例如["max-requests-inflight=500","feature-gates=PodShareProcessNamespace=true,DynamicKubeletConfig=true"]
+ # 注意：此字段可能返回 null，表示取不到有效值。
+ # @type KubeAPIServer: Array
+ # @param KubeControllerManager: kube-controller-manager自定义参数
+ # 注意：此字段可能返回 null，表示取不到有效值。
+ # @type KubeControllerManager: Array
+ # @param KubeScheduler: kube-scheduler自定义参数
+ # 注意：此字段可能返回 null，表示取不到有效值。
+ # @type KubeScheduler: Array
+
+ attr_accessor :KubeAPIServer, :KubeControllerManager, :KubeScheduler
+
+ def initialize(kubeapiserver=nil, kubecontrollermanager=nil, kubescheduler=nil)
+ @KubeAPIServer = kubeapiserver
+ @KubeControllerManager = kubecontrollermanager
+ @KubeScheduler = kubescheduler
+ end
+
+ def deserialize(params)
+ @KubeAPIServer = params['KubeAPIServer']
+ @KubeControllerManager = params['KubeControllerManager']
+ @KubeScheduler = params['KubeScheduler']
+ end
+ end
+
+ # 边缘计算集群内网访问LB信息
+ class EdgeClusterInternalLB < TencentCloud::Common::AbstractModel
+ # @param Enabled: 是否开启内网访问LB
+ # 注意：此字段可能返回 null，表示取不到有效值。
+ # @type Enabled: Boolean
+ # @param SubnetId: 内网访问LB关联的子网Id
+ # 注意：此字段可能返回 null，表示取不到有效值。
+ # @type SubnetId: Array
+
+ attr_accessor :Enabled, :SubnetId
+
+ def initialize(enabled=nil, subnetid=nil)
+ @Enabled = enabled
+ @SubnetId = subnetid
+ end
+
+ def deserialize(params)
+ @Enabled = params['Enabled']
+ @SubnetId = params['SubnetId']
+ end
+ end
+
+ # 边缘计算集群公网访问负载均衡信息
+ class EdgeClusterPublicLB < TencentCloud::Common::AbstractModel
+ # @param Enabled: 是否开启公网访问LB
+ # 注意：此字段可能返回 null，表示取不到有效值。
+ # @type Enabled: Boolean
+ # @param AllowFromCidrs: 允许访问的公网cidr
+ # 注意：此字段可能返回 null，表示取不到有效值。
+ # @type AllowFromCidrs: Array
+
+ attr_accessor :Enabled, :AllowFromCidrs
+
+ def initialize(enabled=nil, allowfromcidrs=nil)
+ @Enabled = enabled
+ @AllowFromCidrs = allowfromcidrs
+ end
+
+ def deserialize(params)
+ @Enabled = params['Enabled']
+ @AllowFromCidrs = params['AllowFromCidrs']
+ end
+ end
+
# 用以帮助用户自动创建EIP的配置
class EipAttribute < TencentCloud::Common::AbstractModel
# @param DeletePolicy: 容器实例删除后，EIP是否释放。
# Never表示不释放，其他任意值（包括空字符串）表示释放。
# @type DeletePolicy: String
@@ -7149,26 +8399,15 @@
@AddonName = params['AddonName']
@AddonParam = params['AddonParam']
end
end
- # >描述键值对过滤器，用于条件过滤查询。例如过滤ID、名称、状态等
- # > * 若存在多个`Filter`时，`Filter`间的关系为逻辑与（`AND`）关系。
- # > * 若同一个`Filter`存在多个`Values`，同一`Filter`下`Values`间的关系为逻辑或（`OR`）关系。
- # >
- # > 以[DescribeInstances](https://cloud.tencent.com/document/api/213/15728)接口的`Filter`为例。若我们需要查询可用区（`zone`）为广州一区 ***并且*** 实例计费模式（`instance-charge-type`）为包年包月 ***或者*** 按量计费的实例时，可如下实现：
- # ```
- # Filters.0.Name=zone
- # &Filters.0.Values.0=ap-guangzhou-1
- # &Filters.1.Name=instance-charge-type
- # &Filters.1.Values.0=PREPAID
- # &Filters.1.Values.1=POSTPAID_BY_HOUR
- # ```
+ # 过滤器
class Filter < TencentCloud::Common::AbstractModel
- # @param Name: 需要过滤的字段。
+ # @param Name: 属性名称, 若存在多个Filter时，Filter间的关系为逻辑与（AND）关系。
# @type Name: String
- # @param Values: 字段的过滤值。
+ # @param Values: 属性值, 若同一个Filter存在多个Values，同一Filter下Values间的关系为逻辑或（OR）关系。
# @type Values: Array
attr_accessor :Name, :Values
def initialize(name=nil, values=nil)
@@ -7789,23 +9028,27 @@
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DesiredPodNumber: Integer
# @param PreStartUserScript: base64 编码的用户脚本，在初始化节点之前执行，目前只对添加已有节点生效
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PreStartUserScript: String
+ # @param Taints: 节点污点
+ # 注意：此字段可能返回 null，表示取不到有效值。
+ # @type Taints: Array
- attr_accessor :MountTarget, :DockerGraphPath, :UserScript, :Unschedulable, :Labels, :DataDisks, :ExtraArgs, :DesiredPodNumber, :PreStartUserScript
+ attr_accessor :MountTarget, :DockerGraphPath, :UserScript, :Unschedulable, :Labels, :DataDisks, :ExtraArgs, :DesiredPodNumber, :PreStartUserScript, :Taints
- def initialize(mounttarget=nil, dockergraphpath=nil, userscript=nil, unschedulable=nil, labels=nil, datadisks=nil, extraargs=nil, desiredpodnumber=nil, prestartuserscript=nil)
+ def initialize(mounttarget=nil, dockergraphpath=nil, userscript=nil, unschedulable=nil, labels=nil, datadisks=nil, extraargs=nil, desiredpodnumber=nil, prestartuserscript=nil, taints=nil)
@MountTarget = mounttarget
@DockerGraphPath = dockergraphpath
@UserScript = userscript
@Unschedulable = unschedulable
@Labels = labels
@DataDisks = datadisks
@ExtraArgs = extraargs
@DesiredPodNumber = desiredpodnumber
@PreStartUserScript = prestartuserscript
+ @Taints = taints
end
def deserialize(params)
@MountTarget = params['MountTarget']
@DockerGraphPath = params['DockerGraphPath']
@@ -7831,10 +9074,18 @@
@ExtraArgs = InstanceExtraArgs.new
@ExtraArgs.deserialize(params['ExtraArgs'])
end
@DesiredPodNumber = params['DesiredPodNumber']
@PreStartUserScript = params['PreStartUserScript']
+ unless params['Taints'].nil?
+ @Taints = []
+ params['Taints'].each do |i|
+ taint_tmp = Taint.new
+ taint_tmp.deserialize(i)
+ @Taints << taint_tmp
+ end
+ end
end
end
# CVM实例数据盘挂载配置
class InstanceDataDiskMountSetting < TencentCloud::Common::AbstractModel
@@ -11364,9 +12615,87 @@
end
end
# UpdateImageCache返回参数结构体
class UpdateImageCacheResponse < TencentCloud::Common::AbstractModel
+ # @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
+ # @type RequestId: String
+
+ attr_accessor :RequestId
+
+ def initialize(requestid=nil)
+ @RequestId = requestid
+ end
+
+ def deserialize(params)
+ @RequestId = params['RequestId']
+ end
+ end
+
+ # UpdateTKEEdgeCluster请求参数结构体
+ class UpdateTKEEdgeClusterRequest < TencentCloud::Common::AbstractModel
+ # @param ClusterId: 边缘计算集群ID
+ # @type ClusterId: String
+ # @param ClusterName: 边缘计算集群名称
+ # @type ClusterName: String
+ # @param ClusterDesc: 边缘计算集群描述信息
+ # @type ClusterDesc: String
+ # @param PodCIDR: 边缘计算集群的pod cidr
+ # @type PodCIDR: String
+ # @param ServiceCIDR: 边缘计算集群的service cidr
+ # @type ServiceCIDR: String
+ # @param PublicLB: 边缘计算集群公网访问LB信息
+ # @type PublicLB: :class:`Tencentcloud::Tke.v20180525.models.EdgeClusterPublicLB`
+ # @param InternalLB: 边缘计算集群内网访问LB信息
+ # @type InternalLB: :class:`Tencentcloud::Tke.v20180525.models.EdgeClusterInternalLB`
+ # @param CoreDns: 边缘计算集群的CoreDns部署信息
+ # @type CoreDns: String
+ # @param HealthRegion: 边缘计算集群的健康检查多地域部署信息
+ # @type HealthRegion: String
+ # @param Health: 边缘计算集群的健康检查部署信息
+ # @type Health: String
+ # @param GridDaemon: 边缘计算集群的GridDaemon部署信息
+ # @type GridDaemon: String
+
+ attr_accessor :ClusterId, :ClusterName, :ClusterDesc, :PodCIDR, :ServiceCIDR, :PublicLB, :InternalLB, :CoreDns, :HealthRegion, :Health, :GridDaemon
+
+ def initialize(clusterid=nil, clustername=nil, clusterdesc=nil, podcidr=nil, servicecidr=nil, publiclb=nil, internallb=nil, coredns=nil, healthregion=nil, health=nil, griddaemon=nil)
+ @ClusterId = clusterid
+ @ClusterName = clustername
+ @ClusterDesc = clusterdesc
+ @PodCIDR = podcidr
+ @ServiceCIDR = servicecidr
+ @PublicLB = publiclb
+ @InternalLB = internallb
+ @CoreDns = coredns
+ @HealthRegion = healthregion
+ @Health = health
+ @GridDaemon = griddaemon
+ end
+
+ def deserialize(params)
+ @ClusterId = params['ClusterId']
+ @ClusterName = params['ClusterName']
+ @ClusterDesc = params['ClusterDesc']
+ @PodCIDR = params['PodCIDR']
+ @ServiceCIDR = params['ServiceCIDR']
+ unless params['PublicLB'].nil?
+ @PublicLB = EdgeClusterPublicLB.new
+ @PublicLB.deserialize(params['PublicLB'])
+ end
+ unless params['InternalLB'].nil?
+ @InternalLB = EdgeClusterInternalLB.new
+ @InternalLB.deserialize(params['InternalLB'])
+ end
+ @CoreDns = params['CoreDns']
+ @HealthRegion = params['HealthRegion']
+ @Health = params['Health']
+ @GridDaemon = params['GridDaemon']
+ end
+ end
+
+ # UpdateTKEEdgeCluster返回参数结构体
+ class UpdateTKEEdgeClusterResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId