README.md in tbd-3.3.0

- old
+ new

@@ -25,42 +25,42 @@
 **Type:** Boolean,
 **Units:** ,
 **Required:** false,
 **Model Dependent:** false
 
-### Proximity tolerance (m)
-Proximity tolerance (e.g. 0.100 m) between subsurface edges, e.g. between near-adjacent window jambs.
-**Name:** sub_tol,
-**Type:** Double,
-**Units:** ,
-**Required:** false,
-**Model Dependent:** false
-
 ### Load 'tbd.json'
 Loads existing 'tbd.json' file (under '/files'), may override 'default thermal bridge' set.
 **Name:** load_tbd_json,
 **Type:** Boolean,
 **Units:** ,
 **Required:** false,
 **Model Dependent:** false
 
 ### Default thermal bridge set
-e.g. 'poor', 'regular', 'efficient', 'code' (may be overridden by 'tbd.json' file).
+e.g. '90.1.22|steel.m|unmitigated' (may be overridden by 'tbd.json' file).
 **Name:** option,
 **Type:** Choice,
 **Units:** ,
 **Required:** false,
 **Model Dependent:** false
 
 ### Write 'tbd.out.json'
-Write out 'tbd.out.json' file e.g., to customize for subsequent runs (edit, and place under '/files' as 'tbd.json').
+Write out 'tbd.out.json' file, e.g. to customize for subsequent runs (edit, and place under '/files' as 'tbd.json').
 **Name:** write_tbd_json,
 **Type:** Boolean,
 **Units:** ,
 **Required:** false,
 **Model Dependent:** false
 
+### Wall-roof edge as 'parapet'
+Leave CHECKED if wall-roof edge is considered a parapet or an overhang (see ASHRAE 90.1 2022 5.5.5.1 & A10).
+**Name:** parapet,
+**Type:** Boolean,
+**Units:** ,
+**Required:** false,
+**Model Dependent:** false
+
 ### Wall construction(s) to 'uprate'
 Target 1x (or 'ALL') wall construction(s) to 'uprate', to achieve wall Ut target below.
 **Name:** wall_option,
 **Type:** Choice,
 **Units:** ,
@@ -74,11 +74,11 @@
 **Units:** ,
 **Required:** false,
 **Model Dependent:** false
 
 ### Floor construction(s) to 'uprate'
-Target 1x (or 'ALL') floor construction(s) to 'uprate', to achieve floor Ut target below.
+Target 1x (or 'ALL') floor construction(s) to 'uprate', toachieve floor Ut target below.
 **Name:** floor_option,
 **Type:** Choice,
 **Units:** ,
 **Required:** false,
 **Model Dependent:** false
@@ -133,9 +133,25 @@
 
 ### Force-generate Kiva inputs
 Overwrites 'ground' boundary conditions as 'foundation' before generating Kiva inputs (recommended).
 **Name:** gen_kiva_force,
 **Type:** Boolean,
+**Units:** ,
+**Required:** false,
+**Model Dependent:** false
+
+### Purge existing KIVA inputs
+Purges KIVA entries from model before generating Kiva inputs.
+**Name:** reset_kiva,
+**Type:** Boolean,
+**Units:** ,
+**Required:** false,
+**Model Dependent:** false
+
+### Proximity tolerance (m)
+Proximity tolerance (e.g. 0.100 m) between subsurface edges, e.g. between near-adjacent window jambs.
+**Name:** sub_tol,
+**Type:** Double,
 **Units:** ,
 **Required:** false,
 **Model Dependent:** false
 
 