lib/squib/graphics/shapes.rb in squib-0.15.2 vs lib/squib/graphics/shapes.rb in squib-0.15.3
- old
+ new
@@ -1,143 +1,143 @@
-module Squib
- # @api private
- class Card
-
- # :nodoc:
- # @api private
- def rect(box, draw, trans)
- use_cairo do |cc|
- cc.rotate_about(box.x, box.y, trans.angle)
- cc.rounded_rectangle(box.x, box.y, box.width, box.height,
- box.x_radius, box.y_radius)
- cc.fill_n_stroke(draw)
- end
- end
-
- # :nodoc:
- # @api private
- def circle(box, draw)
- x, y, r = box.x, box.y, box.radius
- use_cairo do |cc|
- if box.arc_direction == :clockwise
- cc.arc(x, y, r, box.arc_start, box.arc_end)
- else
- cc.arc_negative(x, y, r, box.arc_start, box.arc_end)
- end
- if box.arc_close
- cc.close_path();
- end
- cc.fill_n_stroke(draw)
- end
- end
-
- # Ellipse drawing taken from looking at the control points in Inkscape
- # Think of it like a rectangle. Curves go from mid-points of the sides
- # of the rectangle. Control points are at 1/4 and 3/4 of the side.
- # :nodoc:
- # @api private
- def ellipse(box, draw, trans)
- x, y, w, h = box.x, box.y, box.width, box.height
- use_cairo do |cc|
- cc.rotate_about(box.x, box.y, trans.angle)
- cc.move_to(x, y + 0.5 * h) # start west
- cc.curve_to(x, y + 0.25 * h, # west to north
- x + 0.25 * w, y,
- x + 0.5 * w, y)
- cc.curve_to(x + 0.75 * w, y, # north to east
- x + w, y + 0.25 * h,
- x + w, y + 0.5 * h)
- cc.curve_to(x + w, y + 0.75 * h, # east to south
- x + 0.75 * w, y + h,
- x + 0.5 * w, y + h)
- cc.curve_to(x + 0.25 * w, y + h, # south to west
- x, y + 0.75 * h,
- x, y + 0.5 * h)
- cc.fill_n_stroke(draw)
- end
- end
-
- # :nodoc:
- # @api private
- def grid(box, draw)
- x, y, w, h = box.x, box.y, box.width, box.height
- use_cairo do |cc|
- (x..@width + w).step(w) { |ix| line_xy(ix, y - @height, ix, @height + y, draw) }
- (y..@height + h).step(h) { |iy| line_xy(x - @width, iy, @width + x, iy, draw) }
- end
- end
-
- # :nodoc:
- # @api private
- def triangle(tri, draw)
- use_cairo do |cc|
- cc.triangle(tri.x1, tri.y1, tri.x2, tri.y2, tri.x3, tri.y3)
- cc.fill_n_stroke(draw)
- end
- end
-
- # :nodoc:
- # @api private
- def line(coord, draw)
- line_xy(coord.x1, coord.y1, coord.x2, coord.y2, draw)
- end
-
- # :nodoc:
- # @api private
- def line_xy(x1, y1, x2, y2, draw)
- use_cairo do |cc|
- cc.move_to(x1, y1)
- cc.line_to(x2, y2)
- cc.fancy_stroke(draw)
- end
- end
-
- # :nodoc:
- # @api private
- def curve(bez, draw)
- x1, y1, cx1, cy1 = bez.x1, bez.y1, bez.cx1, bez.cy1
- cx2, cy2, x2, y2 = bez.cx2, bez.cy2, bez.x2, bez.y2
- use_cairo do |cc|
- cc.move_to(x1, y1)
- cc.curve_to(cx1, cy1, cx2, cy2, x2, y2)
- cc.fill_n_stroke(draw)
- end
- end
-
- # :nodoc:
- # @api private
- def star(poly, trans, draw)
- x, y, n = poly.x, poly.y, poly.n
- inner_radius, outer_radius = poly.inner_radius, poly.outer_radius
- use_cairo do |cc|
- cc.rotate_about(x, y, trans.angle)
- cc.move_to(x + outer_radius, y) # i = 0, so cos(0)=1 and sin(0)=0
- theta = Math::PI / n.to_f # i.e. (2*pi) / (2*n)
- 0.upto(2 * n) do |i|
- radius = i.even? ? outer_radius : inner_radius
- cc.line_to(x + radius * Math::cos(i * theta),
- y + radius * Math::sin(i * theta))
- end
- cc.close_path
- cc.fill_n_stroke(draw)
- end
- end
-
- # :nodoc:
- # @api private
- def polygon(poly, trans, draw)
- x, y, n, radius = poly.x, poly.y, poly.n, poly.radius
- use_cairo do |cc|
- cc.rotate_about(x, y, trans.angle)
- cc.move_to(x + radius, y) # i = 0, so cos(0)=1 and sin(0)=0
- theta = (2 * Math::PI) / n.to_f
- 0.upto(n) do |i|
- cc.line_to(x + radius * Math::cos(i * theta),
- y + radius * Math::sin(i * theta))
- end
- cc.close_path
- cc.fill_n_stroke(draw)
- end
- end
-
- end
-end
+module Squib
+ # @api private
+ class Card
+
+ # :nodoc:
+ # @api private
+ def rect(box, draw, trans)
+ use_cairo do |cc|
+ cc.rotate_about(box.x, box.y, trans.angle)
+ cc.rounded_rectangle(box.x, box.y, box.width, box.height,
+ box.x_radius, box.y_radius)
+ cc.fill_n_stroke(draw)
+ end
+ end
+
+ # :nodoc:
+ # @api private
+ def circle(box, draw)
+ x, y, r = box.x, box.y, box.radius
+ use_cairo do |cc|
+ if box.arc_direction == :clockwise
+ cc.arc(x, y, r, box.arc_start, box.arc_end)
+ else
+ cc.arc_negative(x, y, r, box.arc_start, box.arc_end)
+ end
+ if box.arc_close
+ cc.close_path();
+ end
+ cc.fill_n_stroke(draw)
+ end
+ end
+
+ # Ellipse drawing taken from looking at the control points in Inkscape
+ # Think of it like a rectangle. Curves go from mid-points of the sides
+ # of the rectangle. Control points are at 1/4 and 3/4 of the side.
+ # :nodoc:
+ # @api private
+ def ellipse(box, draw, trans)
+ x, y, w, h = box.x, box.y, box.width, box.height
+ use_cairo do |cc|
+ cc.rotate_about(box.x, box.y, trans.angle)
+ cc.move_to(x, y + 0.5 * h) # start west
+ cc.curve_to(x, y + 0.25 * h, # west to north
+ x + 0.25 * w, y,
+ x + 0.5 * w, y)
+ cc.curve_to(x + 0.75 * w, y, # north to east
+ x + w, y + 0.25 * h,
+ x + w, y + 0.5 * h)
+ cc.curve_to(x + w, y + 0.75 * h, # east to south
+ x + 0.75 * w, y + h,
+ x + 0.5 * w, y + h)
+ cc.curve_to(x + 0.25 * w, y + h, # south to west
+ x, y + 0.75 * h,
+ x, y + 0.5 * h)
+ cc.fill_n_stroke(draw)
+ end
+ end
+
+ # :nodoc:
+ # @api private
+ def grid(box, draw)
+ x, y, w, h = box.x, box.y, box.width, box.height
+ use_cairo do |cc|
+ (x..@width + w).step(w) { |ix| line_xy(ix, y - @height, ix, @height + y, draw) }
+ (y..@height + h).step(h) { |iy| line_xy(x - @width, iy, @width + x, iy, draw) }
+ end
+ end
+
+ # :nodoc:
+ # @api private
+ def triangle(tri, draw)
+ use_cairo do |cc|
+ cc.triangle(tri.x1, tri.y1, tri.x2, tri.y2, tri.x3, tri.y3)
+ cc.fill_n_stroke(draw)
+ end
+ end
+
+ # :nodoc:
+ # @api private
+ def line(coord, draw)
+ line_xy(coord.x1, coord.y1, coord.x2, coord.y2, draw)
+ end
+
+ # :nodoc:
+ # @api private
+ def line_xy(x1, y1, x2, y2, draw)
+ use_cairo do |cc|
+ cc.move_to(x1, y1)
+ cc.line_to(x2, y2)
+ cc.fancy_stroke(draw)
+ end
+ end
+
+ # :nodoc:
+ # @api private
+ def curve(bez, draw)
+ x1, y1, cx1, cy1 = bez.x1, bez.y1, bez.cx1, bez.cy1
+ cx2, cy2, x2, y2 = bez.cx2, bez.cy2, bez.x2, bez.y2
+ use_cairo do |cc|
+ cc.move_to(x1, y1)
+ cc.curve_to(cx1, cy1, cx2, cy2, x2, y2)
+ cc.fill_n_stroke(draw)
+ end
+ end
+
+ # :nodoc:
+ # @api private
+ def star(poly, trans, draw)
+ x, y, n = poly.x, poly.y, poly.n
+ inner_radius, outer_radius = poly.inner_radius, poly.outer_radius
+ use_cairo do |cc|
+ cc.rotate_about(x, y, trans.angle)
+ cc.move_to(x + outer_radius, y) # i = 0, so cos(0)=1 and sin(0)=0
+ theta = Math::PI / n.to_f # i.e. (2*pi) / (2*n)
+ 0.upto(2 * n) do |i|
+ radius = i.even? ? outer_radius : inner_radius
+ cc.line_to(x + radius * Math::cos(i * theta),
+ y + radius * Math::sin(i * theta))
+ end
+ cc.close_path
+ cc.fill_n_stroke(draw)
+ end
+ end
+
+ # :nodoc:
+ # @api private
+ def polygon(poly, trans, draw)
+ x, y, n, radius = poly.x, poly.y, poly.n, poly.radius
+ use_cairo do |cc|
+ cc.rotate_about(x, y, trans.angle)
+ cc.move_to(x + radius, y) # i = 0, so cos(0)=1 and sin(0)=0
+ theta = (2 * Math::PI) / n.to_f
+ 0.upto(n) do |i|
+ cc.line_to(x + radius * Math::cos(i * theta),
+ y + radius * Math::sin(i * theta))
+ end
+ cc.close_path
+ cc.fill_n_stroke(draw)
+ end
+ end
+
+ end
+end