save_doc.rb in squib-0.9.0

- old
+ new
@@ -1,103 +1,103 @@
-module Squib
-  class Deck
-
-    # :nodoc:
-    # @api private
-    def render_pdf(range, sheet)
-      file         = "#{sheet.dir}/#{sheet.file}"
-      cc           = Cairo::Context.new(Cairo::PDFSurface.new(file, sheet.width * 72.0 / @dpi, sheet.height * 72.0 / @dpi))
-      cc.scale(72.0 / @dpi, 72.0 / @dpi) # for bug #62
-      x, y         = sheet.margin, sheet.margin
-      card_width   = @width  - 2 * sheet.trim
-      card_height  = @height - 2 * sheet.trim
-      @progress_bar.start("Saving PDF to #{file}", range.size) do |bar|
-        range.each do |i|
-          card = @cards[i]
-          cc.translate(x,y)
-          cc.rectangle(sheet.trim, sheet.trim, card_width, card_height)
-          cc.clip
-          case card.backend.downcase.to_sym
-          when :memory
-            cc.set_source(card.cairo_surface, 0, 0)
-            cc.paint
-          when :svg
-            card.cairo_surface.finish
-            cc.save
-            cc.scale(0.8,0.8) # I really don't know why I needed to do this at all. But 0.8 is the magic number to get this to scale right
-            cc.render_rsvg_handle(RSVG::Handle.new_from_file(card.svgfile), nil)
-            cc.restore
-          else
-            abort "No such back end supported for save_pdf: #{backend}"
-          end
-          bar.increment
-          cc.reset_clip
-          cc.translate(-x,-y)
-          x += card.width + sheet.gap - 2*sheet.trim
-          if x > (sheet.width - card_width - sheet.margin)
-            x = sheet.margin
-            y += card.height + sheet.gap - 2*sheet.trim
-            if y > (sheet.height - card_height - sheet.margin)
-              cc.show_page # next page
-              x,y = sheet.margin,sheet.margin
-            end
-          end
-        end
-      end
-    end
-
-    # :nodoc:
-    # @api private
-    def render_sheet(range, batch, sheet)
-      sheet_width = (sheet.columns * (@width + 2 * sheet.gap - 2 * sheet.trim)) + (2 * sheet.margin)
-      sheet_height = (sheet.rows * (@height + 2 * sheet.gap - 2 * sheet.trim)) + (2 * sheet.margin)
-      cc = Cairo::Context.new(Cairo::ImageSurface.new(sheet_width, sheet_height))
-      num_this_sheet = 0
-      sheet_num = 0
-      x, y = sheet.margin, sheet.margin
-      @progress_bar.start("Saving PNG sheet to #{batch.summary}", @cards.size + 1) do |bar|
-        range.each do |i|
-          if num_this_sheet >= (sheet.columns * sheet.rows) # new sheet
-            filename = batch.full_filename(sheet_num)
-            cc.target.write_to_png(filename)
-            new_sheet = false
-            num_this_sheet = 0
-            sheet_num += 1
-            x, y = sheet.margin, sheet.margin
-            cc = Cairo::Context.new(Cairo::ImageSurface.new(sheet_width, sheet_height))
-          end
-          surface = trim(@cards[i].cairo_surface, sheet.trim, @width, @height)
-          cc.set_source(surface, x, y)
-          cc.paint
-          num_this_sheet += 1
-          x += surface.width + sheet.gap
-          if num_this_sheet % sheet.columns == 0 # new row
-            x = sheet.margin
-            y += surface.height + sheet.gap
-          end
-          bar.increment
-        end
-        cc.target.write_to_png(batch.full_filename(sheet_num))
-      end
-    end
-
-    # Return a new Cairo::ImageSurface that is trimmed from the original
-    #
-    # @param surface The surface to trim
-    # @param trim The number of pixels around the edge to trim
-    # @param width The width of the surface prior to the trim
-    # @param height The height of the surface prior to the trim
-    # :nodoc:
-    # @api private
-    def trim(surface, trim, width, height)
-      if trim > 0
-        tmp = Cairo::ImageSurface.new(width-2*trim, height-2*trim)
-        cc = Cairo::Context.new(tmp)
-        cc.set_source(surface,-1*trim, -1*trim)
-        cc.paint
-        surface = tmp
-      end
-      surface
-    end
-
-  end
-end
+module Squib
+  class Deck
+
+    # :nodoc:
+    # @api private
+    def render_pdf(range, sheet)
+      file         = "#{sheet.dir}/#{sheet.file}"
+      cc           = Cairo::Context.new(Cairo::PDFSurface.new(file, sheet.width * 72.0 / @dpi, sheet.height * 72.0 / @dpi))
+      cc.scale(72.0 / @dpi, 72.0 / @dpi) # for bug #62
+      x, y         = sheet.margin, sheet.margin
+      card_width   = @width  - 2 * sheet.trim
+      card_height  = @height - 2 * sheet.trim
+      @progress_bar.start("Saving PDF to #{file}", range.size) do |bar|
+        range.each do |i|
+          card = @cards[i]
+          cc.translate(x,y)
+          cc.rectangle(sheet.trim, sheet.trim, card_width, card_height)
+          cc.clip
+          case card.backend.downcase.to_sym
+          when :memory
+            cc.set_source(card.cairo_surface, 0, 0)
+            cc.paint
+          when :svg
+            card.cairo_surface.finish
+            cc.save
+            cc.scale(0.8,0.8) # I really don't know why I needed to do this at all. But 0.8 is the magic number to get this to scale right
+            cc.render_rsvg_handle(RSVG::Handle.new_from_file(card.svgfile), nil)
+            cc.restore
+          else
+            abort "No such back end supported for save_pdf: #{backend}"
+          end
+          bar.increment
+          cc.reset_clip
+          cc.translate(-x,-y)
+          x += card.width + sheet.gap - 2*sheet.trim
+          if x > (sheet.width - card_width - sheet.margin)
+            x = sheet.margin
+            y += card.height + sheet.gap - 2*sheet.trim
+            if y > (sheet.height - card_height - sheet.margin)
+              cc.show_page # next page
+              x,y = sheet.margin,sheet.margin
+            end
+          end
+        end
+      end
+    end
+
+    # :nodoc:
+    # @api private
+    def render_sheet(range, batch, sheet)
+      sheet_width = (sheet.columns * (@width + 2 * sheet.gap - 2 * sheet.trim)) + (2 * sheet.margin)
+      sheet_height = (sheet.rows * (@height + 2 * sheet.gap - 2 * sheet.trim)) + (2 * sheet.margin)
+      cc = Cairo::Context.new(Cairo::ImageSurface.new(sheet_width, sheet_height))
+      num_this_sheet = 0
+      sheet_num = 0
+      x, y = sheet.margin, sheet.margin
+      @progress_bar.start("Saving PNG sheet to #{batch.summary}", @cards.size + 1) do |bar|
+        range.each do |i|
+          if num_this_sheet >= (sheet.columns * sheet.rows) # new sheet
+            filename = batch.full_filename(sheet_num)
+            cc.target.write_to_png(filename)
+            new_sheet = false
+            num_this_sheet = 0
+            sheet_num += 1
+            x, y = sheet.margin, sheet.margin
+            cc = Cairo::Context.new(Cairo::ImageSurface.new(sheet_width, sheet_height))
+          end
+          surface = trim(@cards[i].cairo_surface, sheet.trim, @width, @height)
+          cc.set_source(surface, x, y)
+          cc.paint
+          num_this_sheet += 1
+          x += surface.width + sheet.gap
+          if num_this_sheet % sheet.columns == 0 # new row
+            x = sheet.margin
+            y += surface.height + sheet.gap
+          end
+          bar.increment
+        end
+        cc.target.write_to_png(batch.full_filename(sheet_num))
+      end
+    end
+
+    # Return a new Cairo::ImageSurface that is trimmed from the original
+    #
+    # @param surface The surface to trim
+    # @param trim The number of pixels around the edge to trim
+    # @param width The width of the surface prior to the trim
+    # @param height The height of the surface prior to the trim
+    # :nodoc:
+    # @api private
+    def trim(surface, trim, width, height)
+      if trim > 0
+        tmp = Cairo::ImageSurface.new(width-2*trim, height-2*trim)
+        cc = Cairo::Context.new(tmp)
+        cc.set_source(surface,-1*trim, -1*trim)
+        cc.paint
+        surface = tmp
+      end
+      surface
+    end
+
+  end
+end