redis.conf in rubber-2.7.0

- old
+ new

@@ -30,16 +30,21 @@
 
 # Accept connections on the specified port, default is 6379.
 # If port 0 is specified Redis will not listen on a TCP socket.
 port <%= rubber_env.redis_server_port %>
 
-# If you want you can bind a single interface, if the bind option is not
-# specified all the interfaces will listen for incoming connections.
+# By default Redis listens for connections from all the network interfaces
+# available on the server. It is possible to listen to just one or multiple
+# interfaces using the "bind" configuration directive, followed by one or
+# more IP addresses.
 #
+# Examples:
+#
+# bind 192.168.1.100 10.0.0.1
 # bind 127.0.0.1
 
-# Specify the path for the unix socket that will be used to listen for
+# Specify the path for the Unix socket that will be used to listen for
 # incoming connections. There is no default, so Redis will not listen
 # on a unix socket when not specified.
 #
 # unixsocket /tmp/redis.sock
 # unixsocketperm 755
@@ -69,11 +74,11 @@
 # verbose (many rarely useful info, but not a mess like the debug level)
 # notice (moderately verbose, what you want in production probably)
 # warning (only very important / critical messages are logged)
 loglevel notice
 
-# Specify the log file name. Also 'stdout' can be used to force
+# Specify the log file name. Also the empty string can be used to force
 # Redis to log on the standard output. Note that if you use standard
 # output for logging but daemonize, logs will be sent to /dev/null
 logfile <%= rubber_env.redis_server_log_file %>
 
 # To enable logging to the system logger, just set 'syslog-enabled' to yes,
@@ -117,20 +122,20 @@
 save 300 10
 save 60 10000
 
 # By default Redis will stop accepting writes if RDB snapshots are enabled
 # (at least one save point) and the latest background save failed.
-# This will make the user aware (in an hard way) that data is not persisting
+# This will make the user aware (in a hard way) that data is not persisting
 # on disk properly, otherwise chances are that no one will notice and some
-# distater will happen.
+# disaster will happen.
 #
 # If the background saving process will start working again Redis will
 # automatically allow writes again.
 #
 # However if you have setup your proper monitoring of the Redis server
 # and persistence, you may want to disable this feature so that Redis will
-# continue to work as usually even if there are problems with disk,
+# continue to work as usual even if there are problems with disk,
 # permissions, and so forth.
 stop-writes-on-bgsave-error yes
 
 # Compress string objects using LZF when dump .rdb databases?
 # For default that's set to 'yes' as it's almost always a win.
@@ -205,24 +210,27 @@
 # Since Redis 2.6 by default slaves are read-only.
 #
 # Note: read only slaves are not designed to be exposed to untrusted clients
 # on the internet. It's just a protection layer against misuse of the instance.
 # Still a read only slave exports by default all the administrative commands
-# such as CONFIG, DEBUG, and so forth. To a limited extend you can improve
+# such as CONFIG, DEBUG, and so forth. To a limited extent you can improve
 # security of read only slaves using 'rename-command' to shadow all the
 # administrative / dangerous commands.
 slave-read-only yes
 
 # Slaves send PINGs to server in a predefined interval. It's possible to change
 # this interval with the repl_ping_slave_period option. The default value is 10
 # seconds.
 #
 # repl-ping-slave-period 10
 
-# The following option sets a timeout for both Bulk transfer I/O timeout and
-# master data or ping response timeout. The default value is 60 seconds.
+# The following option sets the replication timeout for:
 #
+# 1) Bulk transfer I/O during SYNC, from the point of view of slave.
+# 2) Master timeout from the point of view of slaves (data, pings).
+# 3) Slave timeout from the point of view of masters (REPLCONF ACK pings).
+#
 # It is important to make sure that this value is greater than the value
 # specified for repl-ping-slave-period otherwise a timeout will be detected
 # every time there is low traffic between the master and the slave.
 #
 # repl-timeout 60
@@ -240,24 +248,68 @@
 # By default we optimize for low latency, but in very high traffic conditions
 # or when the master and slaves are many hops away, turning this to "yes" may
 # be a good idea.
 repl-disable-tcp-nodelay no
 
+# Set the replication backlog size. The backlog is a buffer that accumulates
+# slave data when slaves are disconnected for some time, so that when a slave
+# wants to reconnect again, often a full resync is not needed, but a partial
+# resync is enough, just passing the portion of data the slave missed while
+# disconnected.
+#
+# The biggest the replication backlog, the longer the time the slave can be
+# disconnected and later be able to perform a partial resynchronization.
+#
+# The backlog is only allocated once there is at least a slave connected.
+#
+# repl-backlog-size 1mb
+
+# After a master has no longer connected slaves for some time, the backlog
+# will be freed. The following option configures the amount of seconds that
+# need to elapse, starting from the time the last slave disconnected, for
+# the backlog buffer to be freed.
+#
+# A value of 0 means to never release the backlog.
+#
+# repl-backlog-ttl 3600
+
 # The slave priority is an integer number published by Redis in the INFO output.
 # It is used by Redis Sentinel in order to select a slave to promote into a
 # master if the master is no longer working correctly.
 #
 # A slave with a low priority number is considered better for promotion, so
 # for instance if there are three slaves with priority 10, 100, 25 Sentinel will
-# pick the one wtih priority 10, that is the lowest.
+# pick the one with priority 10, that is the lowest.
 #
 # However a special priority of 0 marks the slave as not able to perform the
 # role of master, so a slave with priority of 0 will never be selected by
 # Redis Sentinel for promotion.
 #
 # By default the priority is 100.
 slave-priority 100
+
+# It is possible for a master to stop accepting writes if there are less than
+# N slaves connected, having a lag less or equal than M seconds.
+#
+# The N slaves need to be in "online" state.
+#
+# The lag in seconds, that must be <= the specified value, is calculated from
+# the last ping received from the slave, that is usually sent every second.
+#
+# This option does not GUARANTEES that N replicas will accept the write, but
+# will limit the window of exposure for lost writes in case not enough slaves
+# are available, to the specified number of seconds.
+#
+# For example to require at least 3 slaves with a lag <= 10 seconds use:
+#
+# min-slaves-to-write 3
+# min-slaves-max-lag 10
+#
+# Setting one or the other to 0 disables the feature.
+#
+# By default min-slaves-to-write is set to 0 (feature disabled) and
+# min-slaves-max-lag is set to 10.
 <%- end %>
 
 ################################## SECURITY ###################################
 
 # Require clients to issue AUTH <PASSWORD> before processing any other
@@ -305,19 +357,19 @@
 #
 # maxclients 10000
 
 # Don't use more memory than the specified amount of bytes.
 # When the memory limit is reached Redis will try to remove keys
-# accordingly to the eviction policy selected (see maxmemmory-policy).
+# according to the eviction policy selected (see maxmemory-policy).
 #
 # If Redis can't remove keys according to the policy, or if the policy is
 # set to 'noeviction', Redis will start to reply with errors to commands
 # that would use more memory, like SET, LPUSH, and so on, and will continue
 # to reply to read-only commands like GET.
 #
 # This option is usually useful when using Redis as an LRU cache, or to set
-# an hard memory limit for an instance (using the 'noeviction' policy).
+# a hard memory limit for an instance (using the 'noeviction' policy).
 #
 # WARNING: If you have slaves attached to an instance with maxmemory on,
 # the size of the output buffers needed to feed the slaves are subtracted
 # from the used memory count, so that network problems / resyncs will
 # not trigger a loop where keys are evicted, and in turn the output
@@ -493,10 +545,56 @@
 
 # There is no limit to this length. Just be aware that it will consume memory.
 # You can reclaim memory used by the slow log with SLOWLOG RESET.
 slowlog-max-len 1024
 
+############################# Event notification ##############################
+
+# Redis can notify Pub/Sub clients about events happening in the key space.
+# This feature is documented at http://redis.io/topics/keyspace-events
+#
+# For instance if keyspace events notification is enabled, and a client
+# performs a DEL operation on key "foo" stored in the Database 0, two
+# messages will be published via Pub/Sub:
+#
+# PUBLISH __keyspace@0__:foo del
+# PUBLISH __keyevent@0__:del foo
+#
+# It is possible to select the events that Redis will notify among a set
+# of classes. Every class is identified by a single character:
+#
+#  K     Keyspace events, published with __keyspace@<db>__ prefix.
+#  E     Keyevent events, published with __keyevent@<db>__ prefix.
+#  g     Generic commands (non-type specific) like DEL, EXPIRE, RENAME, ...
+#  $     String commands
+#  l     List commands
+#  s     Set commands
+#  h     Hash commands
+#  z     Sorted set commands
+#  x     Expired events (events generated every time a key expires)
+#  e     Evicted events (events generated when a key is evicted for maxmemory)
+#  A     Alias for g$lshzxe, so that the "AKE" string means all the events.
+#
+#  The "notify-keyspace-events" takes as argument a string that is composed
+#  by zero or multiple characters. The empty string means that notifications
+#  are disabled at all.
+#
+#  Example: to enable list and generic events, from the point of view of the
+#           event name, use:
+#
+#  notify-keyspace-events Elg
+#
+#  Example 2: to get the stream of the expired keys subscribing to channel
+#             name __keyevent@0__:expired use:
+#
+#  notify-keyspace-events Ex
+#
+#  By default all notifications are disabled because most users don't need
+#  this feature and the feature has some overhead. Note that if you don't
+#  specify at least one of K or E, no events will be delivered.
+notify-keyspace-events ""
+
 ############################### ADVANCED CONFIG ###############################
 
 # Hashes are encoded using a memory efficient data structure when they have a
 # small number of entries, and the biggest entry does not exceed a given
 # threshold. These thresholds can be configured using the following directives.
@@ -523,11 +621,11 @@
 zset-max-ziplist-value 64
 
 # Active rehashing uses 1 millisecond every 100 milliseconds of CPU time in
 # order to help rehashing the main Redis hash table (the one mapping top-level
 # keys to values). The hash table implementation Redis uses (see dict.c)
-# performs a lazy rehashing: the more operation you run into an hash table
+# performs a lazy rehashing: the more operation you run into a hash table
 # that is rehashing, the more rehashing "steps" are performed, so if the
 # server is idle the rehashing is never complete and some more memory is used
 # by the hash table.
 #
 # The default is to use this millisecond 10 times every second in order to
@@ -578,14 +676,14 @@
 client-output-buffer-limit normal 0 0 0
 client-output-buffer-limit slave 256mb 64mb 60
 client-output-buffer-limit pubsub 32mb 8mb 60
 
 # Redis calls an internal function to perform many background tasks, like
-# closing connections of clients in timeot, purging expired keys that are
+# closing connections of clients in timeout, purging expired keys that are
 # never requested, and so forth.
 #
-# Not all tasks are perforemd with the same frequency, but Redis checks for
+# Not all tasks are performed with the same frequency, but Redis checks for
 # tasks to perform accordingly to the specified "hz" value.
 #
 # By default "hz" is set to 10. Raising the value will use more CPU when
 # Redis is idle, but at the same time will make Redis more responsive when
 # there are many keys expiring at the same time, and timeouts may be
@@ -593,9 +691,15 @@
 #
 # The range is between 1 and 500, however a value over 100 is usually not
 # a good idea. Most users should use the default of 10 and raise this up to
 # 100 only in environments where very low latency is required.
 hz 10
+
+# When a child rewrites the AOF file, if the following option is enabled
+# the file will be fsync-ed every 32 MB of data generated. This is useful
+# in order to commit the file to the disk more incrementally and avoid
+# big latency spikes.
+aof-rewrite-incremental-fsync yes
 
 ################################## INCLUDES ###################################
 
 # Include one or more other config files here.  This is useful if you
 # have a standard template that goes to all Redis server but also need