commands.rb in origen_spi-0.2.0

- old
+ new
@@ -1,87 +1,87 @@
-# This file should be used to extend the origen with application specific commands
-
-# Map any command aliases here, for example to allow 'origen ex' to refer to a 
-# command called execute you would add a reference as shown below: 
-aliases ={
-#  "ex" => "execute",
-}
-
-# The requested command is passed in here as @command, this checks it against
-# the above alias table and should not be removed.
-@command = aliases[@command] || @command
-
-# Now branch to the specific task code
-case @command
-
-# (Working) example of how to create an application specific comment, here to generate
-# a tags file for you application to enable method definition lookup and similar within
-# editors/IDEs
-when "tags"  
-  # Here the logic is just written in-line, alternatively it could be written in a
-  # dedicated file and required here, e.g.
-  #require "origen_spi/commands/my_command"    # Would load file lib/origen_spi/commands/my_command.rb
-  Dir.chdir Origen.root do
-    system("ripper-tags -R")
-  end
-  # You must always exit upon successfully capturing and executing a command to prevent 
-  # control flowing back to Origen
-  exit 0
-
-## Example of how to make a command to run unit tests, this simply invokes RSpec on
-## the spec directory
-when "specs"
-  require "rspec"
-  exit RSpec::Core::Runner.run(['spec'])
-
-## Example of how to make a command to run diff-based tests
-when "examples", "test"
-  Origen.load_application
-  status = 0
-
-  ARGV = %w(pattern/clock_test.rb -t default.rb -e default.rb -r approved)
-  load "#{Origen.top}/lib/origen/commands/generate.rb"
-
-  ARGV = %w(pattern/shift_test.rb -t default.rb -e default.rb -r approved)
-  load "#{Origen.top}/lib/origen/commands/generate.rb"
-
-  ARGV = %w(pattern/overlay_test.rb -t default.rb -e default.rb -r approved)
-  load "#{Origen.top}/lib/origen/commands/generate.rb"
-
-  ARGV = %w(pattern/keep_ss_active.rb -t default.rb -e default.rb -r approved)
-  load "#{Origen.top}/lib/origen/commands/generate.rb"
-
-  ARGV = %w(pattern/clear_flags_test.rb -t default.rb -e default.rb -r approved)
-  load "#{Origen.top}/lib/origen/commands/generate.rb"
-
-  if Origen.app.stats.changed_files == 0 &&
-     Origen.app.stats.new_files == 0 &&
-     Origen.app.stats.changed_patterns == 0 &&
-     Origen.app.stats.new_patterns == 0
-
-    Origen.app.stats.report_pass
-  else
-    Origen.app.stats.report_fail
-    status = 1
-  end
-  puts
-  if @command == "test"
-    Origen.app.unload_target!
-    require "rspec"
-    result = RSpec::Core::Runner.run(['spec'])
-    status = status == 1 ? 1 : result
-  end
-  exit status  # Exit with a 1 on the event of a failure per std unix result codes
-
-# Always leave an else clause to allow control to fall back through to the
-# Origen command handler.
-else
-  # You probably want to also add the your commands to the help shown via
-  # origen -h, you can do this by assigning the required text to @application_commands
-  # before handing control back to Origen.
-  @application_commands = <<-EOT
- tags         Build a tags file for this app
-  EOT
-# specs        Run the specs (tests), -c will enable coverage
-# examples     Run the examples (tests), -c will enable coverage
-# test         Run both specs and examples, -c will enable coverage
-end 
+# This file should be used to extend the origen with application specific commands
+
+# Map any command aliases here, for example to allow 'origen ex' to refer to a 
+# command called execute you would add a reference as shown below: 
+aliases ={
+#  "ex" => "execute",
+}
+
+# The requested command is passed in here as @command, this checks it against
+# the above alias table and should not be removed.
+@command = aliases[@command] || @command
+
+# Now branch to the specific task code
+case @command
+
+# (Working) example of how to create an application specific comment, here to generate
+# a tags file for you application to enable method definition lookup and similar within
+# editors/IDEs
+when "tags"  
+  # Here the logic is just written in-line, alternatively it could be written in a
+  # dedicated file and required here, e.g.
+  #require "origen_spi/commands/my_command"    # Would load file lib/origen_spi/commands/my_command.rb
+  Dir.chdir Origen.root do
+    system("ripper-tags -R")
+  end
+  # You must always exit upon successfully capturing and executing a command to prevent 
+  # control flowing back to Origen
+  exit 0
+
+## Example of how to make a command to run unit tests, this simply invokes RSpec on
+## the spec directory
+when "specs"
+  require "rspec"
+  exit RSpec::Core::Runner.run(['spec'])
+
+## Example of how to make a command to run diff-based tests
+when "examples", "test"
+  Origen.load_application
+  status = 0
+
+  ARGV = %w(pattern/clock_test.rb -t default.rb -e default.rb -r approved)
+  load "#{Origen.top}/lib/origen/commands/generate.rb"
+
+  ARGV = %w(pattern/shift_test.rb -t default.rb -e default.rb -r approved)
+  load "#{Origen.top}/lib/origen/commands/generate.rb"
+
+  ARGV = %w(pattern/overlay_test.rb -t default.rb -e default.rb -r approved)
+  load "#{Origen.top}/lib/origen/commands/generate.rb"
+
+  ARGV = %w(pattern/keep_ss_active.rb -t default.rb -e default.rb -r approved)
+  load "#{Origen.top}/lib/origen/commands/generate.rb"
+
+  ARGV = %w(pattern/clear_flags_test.rb -t default.rb -e default.rb -r approved)
+  load "#{Origen.top}/lib/origen/commands/generate.rb"
+
+  if Origen.app.stats.changed_files == 0 &&
+     Origen.app.stats.new_files == 0 &&
+     Origen.app.stats.changed_patterns == 0 &&
+     Origen.app.stats.new_patterns == 0
+
+    Origen.app.stats.report_pass
+  else
+    Origen.app.stats.report_fail
+    status = 1
+  end
+  puts
+  if @command == "test"
+    Origen.app.unload_target!
+    require "rspec"
+    result = RSpec::Core::Runner.run(['spec'])
+    status = status == 1 ? 1 : result
+  end
+  exit status  # Exit with a 1 on the event of a failure per std unix result codes
+
+# Always leave an else clause to allow control to fall back through to the
+# Origen command handler.
+else
+  # You probably want to also add the your commands to the help shown via
+  # origen -h, you can do this by assigning the required text to @application_commands
+  # before handing control back to Origen.
+  @application_commands = <<-EOT
+ tags         Build a tags file for this app
+  EOT
+# specs        Run the specs (tests), -c will enable coverage
+# examples     Run the examples (tests), -c will enable coverage
+# test         Run both specs and examples, -c will enable coverage
+end 