spec/dummy/config/initializers/devise.rb in optimacms_options-0.0.6 vs spec/dummy/config/initializers/devise.rb in optimacms_options-0.0.7

- old
+ new

@@ -1,265 +1,265 @@ -# Use this hook to configure devise mailer, warden hooks and so forth. -# Many of these configuration options can be set straight in your model. -Devise.setup do |config| - config.scoped_views = true - - config.secret_key = Rails.application.secrets.devise_secret_key - - # Setup a pepper to generate the encrypted password. - config.pepper = '14f890567940ebd97c796ca1cb0969224bed880faee0d78e8b213f1b2e977d29e2c6e390cd50f3fb98d5561bdeb1722645df5fe4f7cedb630c7889c9c79e27e' - - # ==> Mailer Configuration - # Configure the e-mail address which will be shown in Devise::Mailer, - # note that it will be overwritten if you use your own mailer class - # with default "from" parameter. - config.mailer_sender = 'please-change-me-at-config-initializers-devise@example.com' - - # Configure the class responsible to send e-mails. - # config.mailer = 'Devise::Mailer' - - # ==> ORM configuration - # Load and configure the ORM. Supports :active_record (default) and - # :mongoid (bson_ext recommended) by default. Other ORMs may be - # available as additional gems. - require 'devise/orm/active_record' - - # ==> Configuration for any authentication mechanism - # Configure which keys are used when authenticating a user. The default is - # just :email. You can configure it to use [:username, :subdomain], so for - # authenticating a user, both parameters are required. Remember that those - # parameters are used only when authenticating and not when retrieving from - # session. If you need permissions, you should implement that in a before filter. - # You can also supply a hash where the value is a boolean determining whether - # or not authentication should be aborted when the value is not present. - # config.authentication_keys = [:email] - - # Configure parameters from the request object used for authentication. Each entry - # given should be a request method and it will automatically be passed to the - # find_for_authentication method and considered in your model lookup. For instance, - # if you set :request_keys to [:subdomain], :subdomain will be used on authentication. - # The same considerations mentioned for authentication_keys also apply to request_keys. - # config.request_keys = [] - - # Configure which authentication keys should be case-insensitive. - # These keys will be downcased upon creating or modifying a user and when used - # to authenticate or find a user. Default is :email. - config.case_insensitive_keys = [:email] - - # Configure which authentication keys should have whitespace stripped. - # These keys will have whitespace before and after removed upon creating or - # modifying a user and when used to authenticate or find a user. Default is :email. - config.strip_whitespace_keys = [:email] - - # Tell if authentication through request.params is enabled. True by default. - # It can be set to an array that will enable params authentication only for the - # given strategies, for example, `config.params_authenticatable = [:database]` will - # enable it only for database (email + password) authentication. - # config.params_authenticatable = true - - # Tell if authentication through HTTP Auth is enabled. False by default. - # It can be set to an array that will enable http authentication only for the - # given strategies, for example, `config.http_authenticatable = [:database]` will - # enable it only for database authentication. The supported strategies are: - # :database = Support basic authentication with authentication key + password - # config.http_authenticatable = false - - # If 401 status code should be returned for AJAX requests. True by default. - # config.http_authenticatable_on_xhr = true - - # The realm used in Http Basic Authentication. 'Application' by default. - # config.http_authentication_realm = 'Application' - - # It will change confirmation, password recovery and other workflows - # to behave the same regardless if the e-mail provided was right or wrong. - # Does not affect registerable. - # config.paranoid = true - - # By default Devise will store the user in session. You can skip storage for - # particular strategies by setting this option. - # Notice that if you are skipping storage for all authentication paths, you - # may want to disable generating routes to Devise's sessions controller by - # passing skip: :sessions to `devise_for` in your config/routes.rb - config.skip_session_storage = [:http_auth] - - # By default, Devise cleans up the CSRF token on authentication to - # avoid CSRF token fixation attacks. This means that, when using AJAX - # requests for sign in and sign up, you need to get a new CSRF token - # from the server. You can disable this option at your own risk. - # config.clean_up_csrf_token_on_authentication = true - - # ==> Configuration for :database_authenticatable - # For bcrypt, this is the cost for hashing the password and defaults to 10. If - # using other encryptors, it sets how many times you want the password re-encrypted. - # - # Limiting the stretches to just one in testing will increase the performance of - # your test suite dramatically. However, it is STRONGLY RECOMMENDED to not use - # a value less than 10 in other environments. Note that, for bcrypt (the default - # encryptor), the cost increases exponentially with the number of stretches (e.g. - # a value of 20 is already extremely slow: approx. 60 seconds for 1 calculation). - config.stretches = Rails.env.test? ? 1 : 10 - - # Setup a pepper to generate the encrypted password. - # config.pepper = 'a10216c54c5f16257ba38852216ce84a0f92f1cde4b9c6ac16e858b7e3d58233f76919ee628328b4f83982c57463e803bf28d920d60baef0c0c6e573d9c4e1b2' - - # Send a notification email when the user's password is changed - # config.send_password_change_notification = false - - # ==> Configuration for :confirmable - # A period that the user is allowed to access the website even without - # confirming their account. For instance, if set to 2.days, the user will be - # able to access the website for two days without confirming their account, - # access will be blocked just in the third day. Default is 0.days, meaning - # the user cannot access the website without confirming their account. - # config.allow_unconfirmed_access_for = 2.days - - # A period that the user is allowed to confirm their account before their - # token becomes invalid. For example, if set to 3.days, the user can confirm - # their account within 3 days after the mail was sent, but on the fourth day - # their account can't be confirmed with the token any more. - # Default is nil, meaning there is no restriction on how long a user can take - # before confirming their account. - # config.confirm_within = 3.days - - # If true, requires any email changes to be confirmed (exactly the same way as - # initial account confirmation) to be applied. Requires additional unconfirmed_email - # db field (see migrations). Until confirmed, new email is stored in - # unconfirmed_email column, and copied to email column on successful confirmation. - config.reconfirmable = true - - # Defines which key will be used when confirming an account - # config.confirmation_keys = [:email] - - # ==> Configuration for :rememberable - # The time the user will be remembered without asking for credentials again. - # config.remember_for = 2.weeks - - # Invalidates all the remember me tokens when the user signs out. - config.expire_all_remember_me_on_sign_out = true - - # If true, extends the user's remember period when remembered via cookie. - # config.extend_remember_period = false - - # Options to be passed to the created cookie. For instance, you can set - # secure: true in order to force SSL only cookies. - # config.rememberable_options = {} - - # ==> Configuration for :validatable - # Range for password length. - config.password_length = 8..72 - - # Email regex used to validate email formats. It simply asserts that - # one (and only one) @ exists in the given string. This is mainly - # to give user feedback and not to assert the e-mail validity. - # config.email_regexp = /\A[^@]+@[^@]+\z/ - - # ==> Configuration for :timeoutable - # The time you want to timeout the user session without activity. After this - # time the user will be asked for credentials again. Default is 30 minutes. - # config.timeout_in = 30.minutes - - # ==> Configuration for :lockable - # Defines which strategy will be used to lock an account. - # :failed_attempts = Locks an account after a number of failed attempts to sign in. - # :none = No lock strategy. You should handle locking by yourself. - # config.lock_strategy = :failed_attempts - - # Defines which key will be used when locking and unlocking an account - # config.unlock_keys = [:email] - - # Defines which strategy will be used to unlock an account. - # :email = Sends an unlock link to the user email - # :time = Re-enables login after a certain amount of time (see :unlock_in below) - # :both = Enables both strategies - # :none = No unlock strategy. You should handle unlocking by yourself. - # config.unlock_strategy = :both - - # Number of authentication tries before locking an account if lock_strategy - # is failed attempts. - # config.maximum_attempts = 20 - - # Time interval to unlock the account if :time is enabled as unlock_strategy. - # config.unlock_in = 1.hour - - # Warn on the last attempt before the account is locked. - # config.last_attempt_warning = true - - # ==> Configuration for :recoverable - # - # Defines which key will be used when recovering the password for an account - # config.reset_password_keys = [:email] - - # Time interval you can reset your password with a reset password key. - # Don't put a too small interval or your users won't have the time to - # change their passwords. - config.reset_password_within = 6.hours - - # When set to false, does not sign a user in automatically after their password is - # reset. Defaults to true, so a user is signed in automatically after a reset. - # config.sign_in_after_reset_password = true - - # ==> Configuration for :encryptable - # Allow you to use another encryption algorithm besides bcrypt (default). You can use - # :sha1, :sha512 or encryptors from others authentication tools as :clearance_sha1, - # :authlogic_sha512 (then you should set stretches above to 20 for default behavior) - # and :restful_authentication_sha1 (then you should set stretches to 10, and copy - # REST_AUTH_SITE_KEY to pepper). - # - # Require the `devise-encryptable` gem when using anything other than bcrypt - # config.encryptor = :sha512 - - # ==> Scopes configuration - # Turn scoped views on. Before rendering "sessions/new", it will first check for - # "users/sessions/new". It's turned off by default because it's slower if you - # are using only default views. - # config.scoped_views = false - - # Configure the default scope given to Warden. By default it's the first - # devise role declared in your routes (usually :user). - # config.default_scope = :user - - # Set this configuration to false if you want /users/sign_out to sign out - # only the current scope. By default, Devise signs out all scopes. - # config.sign_out_all_scopes = true - - # ==> Navigation configuration - # Lists the formats that should be treated as navigational. Formats like - # :html, should redirect to the sign in page when the user does not have - # access, but formats like :xml or :json, should return 401. - # - # If you have any extra navigational formats, like :iphone or :mobile, you - # should add them to the navigational formats lists. - # - # The "*/*" below is required to match Internet Explorer requests. - # config.navigational_formats = ['*/*', :html] - - # The default HTTP method used to sign out a resource. Default is :delete. - config.sign_out_via = :delete - - # ==> OmniAuth - # Add a new OmniAuth provider. Check the wiki for more information on setting - # up on your models and hooks. - # config.omniauth :github, 'APP_ID', 'APP_SECRET', scope: 'user,public_repo' - - # ==> Warden configuration - # If you want to use other strategies, that are not supported by Devise, or - # change the failure app, you can configure them inside the config.warden block. - # - # config.warden do |manager| - # manager.intercept_401 = false - # manager.default_strategies(scope: :user).unshift :some_external_strategy - # end - - # ==> Mountable engine configurations - # When using Devise inside an engine, let's call it `MyEngine`, and this engine - # is mountable, there are some extra configurations to be taken into account. - # The following options are available, assuming the engine is mounted as: - # - # mount MyEngine, at: '/my_engine' - # - # The router that invoked `devise_for`, in the example above, would be: - # config.router_name = :my_engine - # - # When using OmniAuth, Devise cannot automatically set OmniAuth path, - # so you need to do it manually. For the users scope, it would be: - # config.omniauth_path_prefix = '/my_engine/users/auth' -end +# Use this hook to configure devise mailer, warden hooks and so forth. +# Many of these configuration options can be set straight in your model. +Devise.setup do |config| + config.scoped_views = true + + config.secret_key = Rails.application.secrets.devise_secret_key + + # Setup a pepper to generate the encrypted password. + config.pepper = '14f890567940ebd97c796ca1cb0969224bed880faee0d78e8b213f1b2e977d29e2c6e390cd50f3fb98d5561bdeb1722645df5fe4f7cedb630c7889c9c79e27e' + + # ==> Mailer Configuration + # Configure the e-mail address which will be shown in Devise::Mailer, + # note that it will be overwritten if you use your own mailer class + # with default "from" parameter. + config.mailer_sender = 'please-change-me-at-config-initializers-devise@example.com' + + # Configure the class responsible to send e-mails. + # config.mailer = 'Devise::Mailer' + + # ==> ORM configuration + # Load and configure the ORM. Supports :active_record (default) and + # :mongoid (bson_ext recommended) by default. Other ORMs may be + # available as additional gems. + require 'devise/orm/active_record' + + # ==> Configuration for any authentication mechanism + # Configure which keys are used when authenticating a user. The default is + # just :email. You can configure it to use [:username, :subdomain], so for + # authenticating a user, both parameters are required. Remember that those + # parameters are used only when authenticating and not when retrieving from + # session. If you need permissions, you should implement that in a before filter. + # You can also supply a hash where the value is a boolean determining whether + # or not authentication should be aborted when the value is not present. + # config.authentication_keys = [:email] + + # Configure parameters from the request object used for authentication. Each entry + # given should be a request method and it will automatically be passed to the + # find_for_authentication method and considered in your model lookup. For instance, + # if you set :request_keys to [:subdomain], :subdomain will be used on authentication. + # The same considerations mentioned for authentication_keys also apply to request_keys. + # config.request_keys = [] + + # Configure which authentication keys should be case-insensitive. + # These keys will be downcased upon creating or modifying a user and when used + # to authenticate or find a user. Default is :email. + config.case_insensitive_keys = [:email] + + # Configure which authentication keys should have whitespace stripped. + # These keys will have whitespace before and after removed upon creating or + # modifying a user and when used to authenticate or find a user. Default is :email. + config.strip_whitespace_keys = [:email] + + # Tell if authentication through request.params is enabled. True by default. + # It can be set to an array that will enable params authentication only for the + # given strategies, for example, `config.params_authenticatable = [:database]` will + # enable it only for database (email + password) authentication. + # config.params_authenticatable = true + + # Tell if authentication through HTTP Auth is enabled. False by default. + # It can be set to an array that will enable http authentication only for the + # given strategies, for example, `config.http_authenticatable = [:database]` will + # enable it only for database authentication. The supported strategies are: + # :database = Support basic authentication with authentication key + password + # config.http_authenticatable = false + + # If 401 status code should be returned for AJAX requests. True by default. + # config.http_authenticatable_on_xhr = true + + # The realm used in Http Basic Authentication. 'Application' by default. + # config.http_authentication_realm = 'Application' + + # It will change confirmation, password recovery and other workflows + # to behave the same regardless if the e-mail provided was right or wrong. + # Does not affect registerable. + # config.paranoid = true + + # By default Devise will store the user in session. You can skip storage for + # particular strategies by setting this option. + # Notice that if you are skipping storage for all authentication paths, you + # may want to disable generating routes to Devise's sessions controller by + # passing skip: :sessions to `devise_for` in your config/routes.rb + config.skip_session_storage = [:http_auth] + + # By default, Devise cleans up the CSRF token on authentication to + # avoid CSRF token fixation attacks. This means that, when using AJAX + # requests for sign in and sign up, you need to get a new CSRF token + # from the server. You can disable this option at your own risk. + # config.clean_up_csrf_token_on_authentication = true + + # ==> Configuration for :database_authenticatable + # For bcrypt, this is the cost for hashing the password and defaults to 10. If + # using other encryptors, it sets how many times you want the password re-encrypted. + # + # Limiting the stretches to just one in testing will increase the performance of + # your test suite dramatically. However, it is STRONGLY RECOMMENDED to not use + # a value less than 10 in other environments. Note that, for bcrypt (the default + # encryptor), the cost increases exponentially with the number of stretches (e.g. + # a value of 20 is already extremely slow: approx. 60 seconds for 1 calculation). + config.stretches = Rails.env.test? ? 1 : 10 + + # Setup a pepper to generate the encrypted password. + # config.pepper = 'a10216c54c5f16257ba38852216ce84a0f92f1cde4b9c6ac16e858b7e3d58233f76919ee628328b4f83982c57463e803bf28d920d60baef0c0c6e573d9c4e1b2' + + # Send a notification email when the user's password is changed + # config.send_password_change_notification = false + + # ==> Configuration for :confirmable + # A period that the user is allowed to access the website even without + # confirming their account. For instance, if set to 2.days, the user will be + # able to access the website for two days without confirming their account, + # access will be blocked just in the third day. Default is 0.days, meaning + # the user cannot access the website without confirming their account. + # config.allow_unconfirmed_access_for = 2.days + + # A period that the user is allowed to confirm their account before their + # token becomes invalid. For example, if set to 3.days, the user can confirm + # their account within 3 days after the mail was sent, but on the fourth day + # their account can't be confirmed with the token any more. + # Default is nil, meaning there is no restriction on how long a user can take + # before confirming their account. + # config.confirm_within = 3.days + + # If true, requires any email changes to be confirmed (exactly the same way as + # initial account confirmation) to be applied. Requires additional unconfirmed_email + # db field (see migrations). Until confirmed, new email is stored in + # unconfirmed_email column, and copied to email column on successful confirmation. + config.reconfirmable = true + + # Defines which key will be used when confirming an account + # config.confirmation_keys = [:email] + + # ==> Configuration for :rememberable + # The time the user will be remembered without asking for credentials again. + # config.remember_for = 2.weeks + + # Invalidates all the remember me tokens when the user signs out. + config.expire_all_remember_me_on_sign_out = true + + # If true, extends the user's remember period when remembered via cookie. + # config.extend_remember_period = false + + # Options to be passed to the created cookie. For instance, you can set + # secure: true in order to force SSL only cookies. + # config.rememberable_options = {} + + # ==> Configuration for :validatable + # Range for password length. + config.password_length = 8..72 + + # Email regex used to validate email formats. It simply asserts that + # one (and only one) @ exists in the given string. This is mainly + # to give user feedback and not to assert the e-mail validity. + # config.email_regexp = /\A[^@]+@[^@]+\z/ + + # ==> Configuration for :timeoutable + # The time you want to timeout the user session without activity. After this + # time the user will be asked for credentials again. Default is 30 minutes. + # config.timeout_in = 30.minutes + + # ==> Configuration for :lockable + # Defines which strategy will be used to lock an account. + # :failed_attempts = Locks an account after a number of failed attempts to sign in. + # :none = No lock strategy. You should handle locking by yourself. + # config.lock_strategy = :failed_attempts + + # Defines which key will be used when locking and unlocking an account + # config.unlock_keys = [:email] + + # Defines which strategy will be used to unlock an account. + # :email = Sends an unlock link to the user email + # :time = Re-enables login after a certain amount of time (see :unlock_in below) + # :both = Enables both strategies + # :none = No unlock strategy. You should handle unlocking by yourself. + # config.unlock_strategy = :both + + # Number of authentication tries before locking an account if lock_strategy + # is failed attempts. + # config.maximum_attempts = 20 + + # Time interval to unlock the account if :time is enabled as unlock_strategy. + # config.unlock_in = 1.hour + + # Warn on the last attempt before the account is locked. + # config.last_attempt_warning = true + + # ==> Configuration for :recoverable + # + # Defines which key will be used when recovering the password for an account + # config.reset_password_keys = [:email] + + # Time interval you can reset your password with a reset password key. + # Don't put a too small interval or your users won't have the time to + # change their passwords. + config.reset_password_within = 6.hours + + # When set to false, does not sign a user in automatically after their password is + # reset. Defaults to true, so a user is signed in automatically after a reset. + # config.sign_in_after_reset_password = true + + # ==> Configuration for :encryptable + # Allow you to use another encryption algorithm besides bcrypt (default). You can use + # :sha1, :sha512 or encryptors from others authentication tools as :clearance_sha1, + # :authlogic_sha512 (then you should set stretches above to 20 for default behavior) + # and :restful_authentication_sha1 (then you should set stretches to 10, and copy + # REST_AUTH_SITE_KEY to pepper). + # + # Require the `devise-encryptable` gem when using anything other than bcrypt + # config.encryptor = :sha512 + + # ==> Scopes configuration + # Turn scoped views on. Before rendering "sessions/new", it will first check for + # "users/sessions/new". It's turned off by default because it's slower if you + # are using only default views. + # config.scoped_views = false + + # Configure the default scope given to Warden. By default it's the first + # devise role declared in your routes (usually :user). + # config.default_scope = :user + + # Set this configuration to false if you want /users/sign_out to sign out + # only the current scope. By default, Devise signs out all scopes. + # config.sign_out_all_scopes = true + + # ==> Navigation configuration + # Lists the formats that should be treated as navigational. Formats like + # :html, should redirect to the sign in page when the user does not have + # access, but formats like :xml or :json, should return 401. + # + # If you have any extra navigational formats, like :iphone or :mobile, you + # should add them to the navigational formats lists. + # + # The "*/*" below is required to match Internet Explorer requests. + # config.navigational_formats = ['*/*', :html] + + # The default HTTP method used to sign out a resource. Default is :delete. + config.sign_out_via = :delete + + # ==> OmniAuth + # Add a new OmniAuth provider. Check the wiki for more information on setting + # up on your models and hooks. + # config.omniauth :github, 'APP_ID', 'APP_SECRET', scope: 'user,public_repo' + + # ==> Warden configuration + # If you want to use other strategies, that are not supported by Devise, or + # change the failure app, you can configure them inside the config.warden block. + # + # config.warden do |manager| + # manager.intercept_401 = false + # manager.default_strategies(scope: :user).unshift :some_external_strategy + # end + + # ==> Mountable engine configurations + # When using Devise inside an engine, let's call it `MyEngine`, and this engine + # is mountable, there are some extra configurations to be taken into account. + # The following options are available, assuming the engine is mounted as: + # + # mount MyEngine, at: '/my_engine' + # + # The router that invoked `devise_for`, in the example above, would be: + # config.router_name = :my_engine + # + # When using OmniAuth, Devise cannot automatically set OmniAuth path, + # so you need to do it manually. For the users scope, it would be: + # config.omniauth_path_prefix = '/my_engine/users/auth' +end