Standards.AirTerminalSingleDuctParallelPIUReheat.rb in openstudio-standards-0.2.0.rc1

- old
+ new

@@ -1,15 +1,14 @@
+class Standard
+  # @!group AirTerminalSingleDuctParallelPIUReheat
 
-# open the class to add methods to apply HVAC efficiency standards
-class OpenStudio::Model::AirTerminalSingleDuctParallelPIUReheat
   # Sets the fan power of a PIU fan based on the W/cfm
   # specified in the standard.
   #
-  # @param template [String] the template base requirements on
   # @return [Bool] returns true if successful, false if not
-  def apply_prm_baseline_fan_power(template)
-    OpenStudio.logFree(OpenStudio::Debug, 'openstudio.model.AirTerminalSingleDuctParallelPIUReheat', "Setting PIU fan power for #{name}.")
+  def air_terminal_single_duct_parallel_piu_reheat_apply_prm_baseline_fan_power(air_terminal_single_duct_parallel_piu_reheat)
+    OpenStudio.logFree(OpenStudio::Debug, 'openstudio.model.AirTerminalSingleDuctParallelPIUReheat', "Setting PIU fan power for #{air_terminal_single_duct_parallel_piu_reheat.name}.")
 
     # Determine the fan sizing flow rate, min flow rate,
     # and W/cfm
     sec_flow_frac = 0.5
     min_flow_frac = 0.3
@@ -19,44 +18,44 @@
     # 1 cfm = 0.0004719 m^3/s
     fan_efficacy_w_per_m3_per_s = fan_efficacy_w_per_cfm / 0.0004719
 
     # Get the maximum flow rate through the terminal
     max_primary_air_flow_rate = nil
-    if autosizedMaximumPrimaryAirFlowRate.is_initialized
-      max_primary_air_flow_rate = autosizedMaximumPrimaryAirFlowRate.get
-    elsif maximumPrimaryAirFlowRate.is_initialized
-      max_primary_air_flow_rate = maximumPrimaryAirFlowRate.get
+    if air_terminal_single_duct_parallel_piu_reheat.autosizedMaximumPrimaryAirFlowRate.is_initialized
+      max_primary_air_flow_rate = air_terminal_single_duct_parallel_piu_reheat.autosizedMaximumPrimaryAirFlowRate.get
+    elsif air_terminal_single_duct_parallel_piu_reheat.maximumPrimaryAirFlowRate.is_initialized
+      max_primary_air_flow_rate = air_terminal_single_duct_parallel_piu_reheat.maximumPrimaryAirFlowRate.get
     end
 
     # Set the max secondary air flow rate
     max_sec_flow_rate_m3_per_s = max_primary_air_flow_rate * sec_flow_frac
-    setMaximumSecondaryAirFlowRate(max_sec_flow_rate_m3_per_s)
+    air_terminal_single_duct_parallel_piu_reheat.setMaximumSecondaryAirFlowRate(max_sec_flow_rate_m3_per_s)
     max_sec_flow_rate_cfm = OpenStudio.convert(max_sec_flow_rate_m3_per_s, 'm^3/s', 'ft^3/min').get
 
     # Set the minimum flow fraction
     # TODO Also compare to min OA requirement
-    setMinimumPrimaryAirFlowFraction(min_flow_frac)
+    air_terminal_single_duct_parallel_piu_reheat.setMinimumPrimaryAirFlowFraction(min_flow_frac)
 
     # Get the fan
-    fan = self.fan.to_FanConstantVolume.get
+    fan = air_terminal_single_duct_parallel_piu_reheat.fan.to_FanConstantVolume.get
 
     # Set the impeller efficiency
-    fan.change_impeller_efficiency(fan.baseline_impeller_efficiency(template))
+    fan_change_impeller_efficiency(fan, fan_baseline_impeller_efficiency(fan))
 
     # Set the motor efficiency, preserving the impeller efficency.
     # For terminal fans, a bhp lookup of 0.5bhp is always used because
     # they are assumed to represent a series of small fans in reality.
-    fan.apply_standard_minimum_motor_efficiency(template, fan.brake_horsepower)
+    fan_apply_standard_minimum_motor_efficiency(fan, fan_brake_horsepower(fan))
 
     # Calculate a new pressure rise to hit the target W/cfm
     fan_tot_eff = fan.fanEfficiency
     fan_rise_new_pa = fan_efficacy_w_per_m3_per_s * fan_tot_eff
     fan.setPressureRise(fan_rise_new_pa)
 
     # Calculate the newly set efficacy
     fan_power_new_w = fan_rise_new_pa * max_sec_flow_rate_m3_per_s / fan_tot_eff
     fan_efficacy_new_w_per_cfm = fan_power_new_w / max_sec_flow_rate_cfm
-    OpenStudio.logFree(OpenStudio::Info, 'openstudio.model.AirTerminalSingleDuctParallelPIUReheat', "For #{name}: fan efficacy set to #{fan_efficacy_new_w_per_cfm.round(2)} W/cfm.")
+    OpenStudio.logFree(OpenStudio::Info, 'openstudio.model.AirTerminalSingleDuctParallelPIUReheat', "For #{air_terminal_single_duct_parallel_piu_reheat.name}: fan efficacy set to #{fan_efficacy_new_w_per_cfm.round(2)} W/cfm.")
 
     return true
   end
 end