jerbil_test.rb in jerbil-1.4.5

- old
+ new
@@ -1,35 +1,107 @@
+#
+# Configuration Options for: Jellog::Config
+#
 project_root = '/home/robert/dev/projects/jerbil'
-env = :test
-environment env
 
-# directory used to store the daemons pid to assist in stopping reluctant servers
-pid_dir "#{project_root}/test/pids"
-
-# Number of log files to retain at any moment
-#log_rotation 2
-
-# Location for Jellog (logging utility) to save log files
+# Path to a writeable directory where Jellog will save log files.
+#log_dir "/var/log/jerbil"
 log_dir "#{project_root}/log"
 
-# Size of a log file (in MB) before switching to the next log
-#log_length 1
-
 # Controls the amount of logging done by Jellog
 # 
 #  * :system - standard message, plus log to syslog
 #  * :verbose - more generous logging to help resolve problems
 #  * :debug - usually used only for resolving problems during development
 # 
 log_level :debug
 
-# private key file used to authenticate privileged users
-key_dir "#{project_root}/test/pids"
+# Number of log files to retain at any time, between 0 and 20
+#log_rotation 2
 
-#user 'robert'
+# Size of a log file (in MB) before switching to the next log, upto 20 MB
+#log_length 1
 
+# Reset the logfile when starting logging by setting to true, otherwise append to
+# existing log
+#log_reset false
 
-# netmask
-net_address '192.168.0.1'
-net_mask 26
-scan_timeout 0.1
-secret '123456789=[]'
\ No newline at end of file
+# Set to false to suppress colourful logging. Default colours can be changed by calling
+# #colours= method
+#log_coloured true
+
+# Format string for time stamps. Needs to be a string that is recognised by String#strftime
+# Any characters not recognised by strftime will be printed verbatim, which may not be what you want
+#log_date_time_format "%Y-%m-%d %H:%M:%S"
+
+# Setting to true (the default) will flush log messages immediately, which is useful if you
+# need to monitor logs dynamically
+#log_sync true
+
+# Set the string to be used for marking the log with logger.mark
+#log_mark "   ===== Mark ====="
+
+# Set to true to prevent system log calls from logging to syslog as well
+#disable_syslog false
+
+#
+# Configuration Options for: JerbilService::Config
+#
+
+# Set the environment for the service to run in.
+# 
+# Can be one of the following:
+#   :prod - for productionised services in use across a network 
+#   :test - for testing a release candidate, e.g. also across the network
+#   :dev - for developing the next release
+# 
+# Services can be running in all three environments at the same time. Clients
+# will need to use the appropriate config file to connect with each environment.
+environment :test
+
+# a writable directory where Jerbil stores a private key for each service.
+# This key is used to authenticate systems operations, such as stopping the service.
+# It is not used for client interactions, which can require a separate service key.
+key_dir "#{project_root}/tmp"
+
+# A writable directory used to store the pid to assist in stopping reluctant servers
+pid_dir "#{project_root}/tmp"
+
+# Set this only to use a Jerbil Server that is not running in the production environment
+#jerbil_env 
+
+#
+# Configuration Options for: Jerbil::Config
+#
+
+# A valid IPv4 address for the LAN on which the servers will operate.
+# Note that the broker uses this address to search for all servers.
+# Therefore a large range will take a long time to search. Set the net_mask to limit this.
+#net_address "192.168.0.1"
+
+# A valid netmask for the hosts to search using the above net address. This should be
+# between 24 (a class C network) and 30, beyound which its not much of a network. If you only have a few
+# hosts it will be easier to restrict them to a small subnet.
+# 
+# To find out more about netmasks, go to [UnixWiz](http://www.unixwiz.net/techtips/netmask-ref.html).
+#net_mask 26
+
+# Provide a timeout in seconds when searching for jerbil servers on the net during startup.
+# Depending on the size of the net mask this timeout may make the search long.
+# The default should work in most cases
+#scan_timeout 0.1
+
+# Define how many times the monitor process will check for other servers
+# at start up. Limited to at least once and at most 10 times. Probably is not need
+# to check more than 3 times unless you set a very short scan timeout.
+#check_count 3
+
+# Define the delay between successive checks carried out by the monitor at start up.
+# Setting it to 0 will cause the checks to be completed without delay. The upper limit is
+# an hour for no particular reason. Default should work for most cases. Could be quicker on smaller
+# nets with fewer machines to check each time.
+#loop_time 30
+
+# A secret key available to all Jerbil Servers and used to authenticate the initial registration.
+# If security is an issue, ensure that this config file is readable only be trusted users
+secret "ddd3863fe7ab8506d13c86b797d5ab45496ce00e"
+