spec/spec_helper.rb in hellosign-ruby-sdk-3.7.7 vs spec/spec_helper.rb in hellosign-ruby-sdk-6.0.0.pre.beta
- old
+ new
@@ -1,104 +1,111 @@
-# This file was generated by the `rspec --init` command. Conventionally, all
-# specs live under a `spec` directory, which RSpec adds to the `$LOAD_PATH`.
-# Require this file using `require "spec_helper"` to ensure that it is only
-# loaded once.
-#
+=begin
+#HelloSign API
-# The MIT License (MIT)
-#
-# Copyright (C) 2014 hellosign.com
-#
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documentation files (the "Software"), to deal
-# in the Software without restriction, including without limitation the rights
-# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-# copies of the Software, and to permit persons to whom the Software is
-# furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in all
-# copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
-# SOFTWARE.
+#HelloSign v3 API
-if ENV['TRAVIS']
- require 'coveralls'
- Coveralls.wear!
-end
+The version of the OpenAPI document: 3.0.0
+Contact: apisupport@hellosign.com
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 5.3.0
-require 'webmock/rspec'
-require 'pry'
-require File.expand_path('../../lib/hello_sign', __FILE__)
+=end
+# load the gem
+require 'hellosign-ruby-sdk'
+
+# The following was generated by the `rspec --init` command. Conventionally, all
+# specs live under a `spec` directory, which RSpec adds to the `$LOAD_PATH`.
+# The generated `.rspec` file contains `--require spec_helper` which will cause
+# this file to always be loaded, without a need to explicitly require it in any
+# files.
+#
+# Given that it is always loaded, you are encouraged to keep this file as
+# light-weight as possible. Requiring heavyweight dependencies from this file
+# will add to the boot time of your test suite on EVERY test run, even for an
+# individual file that may not need all of that loaded. Instead, consider making
+# a separate helper file that requires the additional dependencies and performs
+# the additional setup, and require it from the spec files that actually need
+# it.
+#
+# The `.rspec` file also contains a few flags that are not defaults but that
+# users commonly want.
+#
# See http://rubydoc.info/gems/rspec-core/RSpec/Core/Configuration
RSpec.configure do |config|
- config.expect_with :rspec do |c|
- c.syntax = :expect
+ # rspec-expectations config goes here. You can use an alternate
+ # assertion/expectation library such as wrong or the stdlib/minitest
+ # assertions if you prefer.
+ config.expect_with :rspec do |expectations|
+ # This option will default to `true` in RSpec 4. It makes the `description`
+ # and `failure_message` of custom matchers include text for helper methods
+ # defined using `chain`, e.g.:
+ # be_bigger_than(2).and_smaller_than(4).description
+ # # => "be bigger than 2 and smaller than 4"
+ # ...rather than:
+ # # => "be bigger than 2"
+ expectations.include_chain_clauses_in_custom_matcher_descriptions = true
end
- config.run_all_when_everything_filtered = true
- config.filter_run :focus
- # Run specs in random order to surface order dependencies. If you find an
- # order dependency and want to debug it, you can fix the order by providing
- # the seed, which is printed after each run.
- # --seed 1234
- config.order = 'random'
-end
+ # rspec-mocks config goes here. You can use an alternate test double
+ # library (such as bogus or mocha) by changing the `mock_with` option here.
+ config.mock_with :rspec do |mocks|
+ # Prevents you from mocking or stubbing a method that does not exist on
+ # a real object. This is generally recommended, and will default to
+ # `true` in RSpec 4.
+ mocks.verify_partial_doubles = true
+ end
-def load_fixture(name)
- File.new(File.dirname(__FILE__) + "/fixtures/#{name}.json")
-end
+# The settings below are suggested to provide a good initial experience
+# with RSpec, but feel free to customize to your heart's content.
+=begin
+ # These two settings work together to allow you to limit a spec run
+ # to individual examples or groups you care about by tagging them with
+ # `:focus` metadata. When nothing is tagged with `:focus`, all examples
+ # get run.
+ config.filter_run :focus
+ config.run_all_when_everything_filtered = true
-def load_file(name)
- File.read(File.new(File.dirname(__FILE__) + "/fixtures/#{name}"))
-end
+ # Allows RSpec to persist some state between runs in order to support
+ # the `--only-failures` and `--next-failure` CLI options. We recommend
+ # you configure your source control system to ignore this file.
+ config.example_status_persistence_file_path = "spec/examples.txt"
-def stub_get(path, fixture, status_code=200)
- stub_request(:get, "#{HelloSign.end_point}#{HelloSign.api_version}#{path}").
- to_return(:headers => load_fixture("headers"), :body => load_fixture(fixture), :status => status_code)
-end
+ # Limits the available syntax to the non-monkey patched syntax that is
+ # recommended. For more details, see:
+ # - http://rspec.info/blog/2012/06/rspecs-new-expectation-syntax/
+ # - http://www.teaisaweso.me/blog/2013/05/27/rspecs-new-message-expectation-syntax/
+ # - http://rspec.info/blog/2014/05/notable-changes-in-rspec-3/#zero-monkey-patching-mode
+ config.disable_monkey_patching!
-def a_get(path)
- a_request(:get, "#{HelloSign.end_point}#{HelloSign.api_version}#{path}")
-end
+ # This setting enables warnings. It's recommended, but in some cases may
+ # be too noisy due to issues in dependencies.
+ config.warnings = true
-def stub_post(path, fixture, status_code=200)
- stub_request(:post, "#{HelloSign.end_point}#{HelloSign.api_version}#{path}").
- to_return(:headers => load_fixture("headers"), :body => load_fixture(fixture), :status => status_code)
-end
+ # Many RSpec users commonly either run the entire suite or an individual
+ # file, and it's useful to allow more verbose output when running an
+ # individual spec file.
+ if config.files_to_run.one?
+ # Use the documentation formatter for detailed output,
+ # unless a formatter has already been configured
+ # (e.g. via a command-line flag).
+ config.default_formatter = 'doc'
+ end
-def stub_post_oauth(path, fixture, status_code=200)
- stub_request(:post, "#{HelloSign.oauth_end_point}#{path}").
- to_return(:body => load_fixture(fixture), :status => status_code)
-end
+ # Print the 10 slowest examples and example groups at the
+ # end of the spec run, to help surface which specs are running
+ # particularly slow.
+ config.profile_examples = 10
-def a_post(path)
- a_request(:post, "#{HelloSign.end_point}#{HelloSign.api_version}#{path}")
-end
+ # Run specs in random order to surface order dependencies. If you find an
+ # order dependency and want to debug it, you can fix the order by providing
+ # the seed, which is printed after each run.
+ # --seed 1234
+ config.order = :random
-def a_post_oauth(path)
- a_request(:post, "#{HelloSign.oauth_end_point}#{path}")
-end
-
-def stub_put(path, fixture)
- stub_request(:put, "#{HelloSign.end_point}#{HelloSign.api_version}#{path}").
- to_return(:body => load_fixture(fixture))
-end
-
-def a_put(path)
- a_request(:put, "#{HelloSign.end_point}#{HelloSign.api_version}#{path}")
-end
-
-def stub_delete(path, fixture)
- stub_request(:delete, "#{HelloSign.end_point}#{HelloSign.api_version}#{path}").
- to_return(:body => load_fixture(fixture))
-end
-
-def a_delete(path)
- a_request(:delete, "#{HelloSign.end_point}#{HelloSign.api_version}#{path}")
+ # Seed global randomization in this process using the `--seed` CLI option.
+ # Setting this allows you to use `--seed` to deterministically reproduce
+ # test failures related to randomization by passing the same `--seed` value
+ # as the one that triggered the failure.
+ Kernel.srand config.seed
+=end
end