contrib/zstd/lib/compress/zstdmt_compress.h in extzstd-0.3.1 vs contrib/zstd/lib/compress/zstdmt_compress.h in extzstd-0.3.2
- old
+ new
@@ -17,30 +17,18 @@
/* Note : This is an internal API.
* These APIs used to be exposed with ZSTDLIB_API,
* because it used to be the only way to invoke MT compression.
- * Now, it's recommended to use ZSTD_compress2 and ZSTD_compressStream2()
- * instead.
+ * Now, you must use ZSTD_compress2 and ZSTD_compressStream2() instead.
*
- * If you depend on these APIs and can't switch, then define
- * ZSTD_LEGACY_MULTITHREADED_API when making the dynamic library.
- * However, we may completely remove these functions in a future
- * release, so please switch soon.
- *
* This API requires ZSTD_MULTITHREAD to be defined during compilation,
* otherwise ZSTDMT_createCCtx*() will fail.
*/
-#ifdef ZSTD_LEGACY_MULTITHREADED_API
-# define ZSTDMT_API ZSTDLIB_API
-#else
-# define ZSTDMT_API
-#endif
-
/* === Dependencies === */
-#include <stddef.h> /* size_t */
+#include "../common/zstd_deps.h" /* size_t */
#define ZSTD_STATIC_LINKING_ONLY /* ZSTD_parameters */
#include "../zstd.h" /* ZSTD_inBuffer, ZSTD_outBuffer, ZSTDLIB_API */
/* === Constants === */
@@ -52,138 +40,68 @@
#endif
#define ZSTDMT_JOBLOG_MAX (MEM_32bits() ? 29 : 30)
#define ZSTDMT_JOBSIZE_MAX (MEM_32bits() ? (512 MB) : (1024 MB))
+/* ========================================================
+ * === Private interface, for use by ZSTD_compress.c ===
+ * === Not exposed in libzstd. Never invoke directly ===
+ * ======================================================== */
+
/* === Memory management === */
typedef struct ZSTDMT_CCtx_s ZSTDMT_CCtx;
/* Requires ZSTD_MULTITHREAD to be defined during compilation, otherwise it will return NULL. */
-ZSTDMT_API ZSTDMT_CCtx* ZSTDMT_createCCtx(unsigned nbWorkers);
-/* Requires ZSTD_MULTITHREAD to be defined during compilation, otherwise it will return NULL. */
-ZSTDMT_API ZSTDMT_CCtx* ZSTDMT_createCCtx_advanced(unsigned nbWorkers,
- ZSTD_customMem cMem);
-ZSTDMT_API size_t ZSTDMT_freeCCtx(ZSTDMT_CCtx* mtctx);
+ZSTDMT_CCtx* ZSTDMT_createCCtx_advanced(unsigned nbWorkers,
+ ZSTD_customMem cMem,
+ ZSTD_threadPool *pool);
+size_t ZSTDMT_freeCCtx(ZSTDMT_CCtx* mtctx);
-ZSTDMT_API size_t ZSTDMT_sizeof_CCtx(ZSTDMT_CCtx* mtctx);
+size_t ZSTDMT_sizeof_CCtx(ZSTDMT_CCtx* mtctx);
-
-/* === Simple one-pass compression function === */
-
-ZSTDMT_API size_t ZSTDMT_compressCCtx(ZSTDMT_CCtx* mtctx,
- void* dst, size_t dstCapacity,
- const void* src, size_t srcSize,
- int compressionLevel);
-
-
-
/* === Streaming functions === */
-ZSTDMT_API size_t ZSTDMT_initCStream(ZSTDMT_CCtx* mtctx, int compressionLevel);
-ZSTDMT_API size_t ZSTDMT_resetCStream(ZSTDMT_CCtx* mtctx, unsigned long long pledgedSrcSize); /**< if srcSize is not known at reset time, use ZSTD_CONTENTSIZE_UNKNOWN. Note: for compatibility with older programs, 0 means the same as ZSTD_CONTENTSIZE_UNKNOWN, but it will change in the future to mean "empty" */
+size_t ZSTDMT_nextInputSizeHint(const ZSTDMT_CCtx* mtctx);
-ZSTDMT_API size_t ZSTDMT_nextInputSizeHint(const ZSTDMT_CCtx* mtctx);
-ZSTDMT_API size_t ZSTDMT_compressStream(ZSTDMT_CCtx* mtctx, ZSTD_outBuffer* output, ZSTD_inBuffer* input);
+/*! ZSTDMT_initCStream_internal() :
+ * Private use only. Init streaming operation.
+ * expects params to be valid.
+ * must receive dict, or cdict, or none, but not both.
+ * @return : 0, or an error code */
+size_t ZSTDMT_initCStream_internal(ZSTDMT_CCtx* zcs,
+ const void* dict, size_t dictSize, ZSTD_dictContentType_e dictContentType,
+ const ZSTD_CDict* cdict,
+ ZSTD_CCtx_params params, unsigned long long pledgedSrcSize);
-ZSTDMT_API size_t ZSTDMT_flushStream(ZSTDMT_CCtx* mtctx, ZSTD_outBuffer* output); /**< @return : 0 == all flushed; >0 : still some data to be flushed; or an error code (ZSTD_isError()) */
-ZSTDMT_API size_t ZSTDMT_endStream(ZSTDMT_CCtx* mtctx, ZSTD_outBuffer* output); /**< @return : 0 == all flushed; >0 : still some data to be flushed; or an error code (ZSTD_isError()) */
-
-
-/* === Advanced functions and parameters === */
-
-ZSTDMT_API size_t ZSTDMT_compress_advanced(ZSTDMT_CCtx* mtctx,
- void* dst, size_t dstCapacity,
- const void* src, size_t srcSize,
- const ZSTD_CDict* cdict,
- ZSTD_parameters params,
- int overlapLog);
-
-ZSTDMT_API size_t ZSTDMT_initCStream_advanced(ZSTDMT_CCtx* mtctx,
- const void* dict, size_t dictSize, /* dict can be released after init, a local copy is preserved within zcs */
- ZSTD_parameters params,
- unsigned long long pledgedSrcSize); /* pledgedSrcSize is optional and can be zero == unknown */
-
-ZSTDMT_API size_t ZSTDMT_initCStream_usingCDict(ZSTDMT_CCtx* mtctx,
- const ZSTD_CDict* cdict,
- ZSTD_frameParameters fparams,
- unsigned long long pledgedSrcSize); /* note : zero means empty */
-
-/* ZSTDMT_parameter :
- * List of parameters that can be set using ZSTDMT_setMTCtxParameter() */
-typedef enum {
- ZSTDMT_p_jobSize, /* Each job is compressed in parallel. By default, this value is dynamically determined depending on compression parameters. Can be set explicitly here. */
- ZSTDMT_p_overlapLog, /* Each job may reload a part of previous job to enhance compression ratio; 0 == no overlap, 6(default) == use 1/8th of window, >=9 == use full window. This is a "sticky" parameter : its value will be re-used on next compression job */
- ZSTDMT_p_rsyncable /* Enables rsyncable mode. */
-} ZSTDMT_parameter;
-
-/* ZSTDMT_setMTCtxParameter() :
- * allow setting individual parameters, one at a time, among a list of enums defined in ZSTDMT_parameter.
- * The function must be called typically after ZSTD_createCCtx() but __before ZSTDMT_init*() !__
- * Parameters not explicitly reset by ZSTDMT_init*() remain the same in consecutive compression sessions.
- * @return : 0, or an error code (which can be tested using ZSTD_isError()) */
-ZSTDMT_API size_t ZSTDMT_setMTCtxParameter(ZSTDMT_CCtx* mtctx, ZSTDMT_parameter parameter, int value);
-
-/* ZSTDMT_getMTCtxParameter() :
- * Query the ZSTDMT_CCtx for a parameter value.
- * @return : 0, or an error code (which can be tested using ZSTD_isError()) */
-ZSTDMT_API size_t ZSTDMT_getMTCtxParameter(ZSTDMT_CCtx* mtctx, ZSTDMT_parameter parameter, int* value);
-
-
/*! ZSTDMT_compressStream_generic() :
* Combines ZSTDMT_compressStream() with optional ZSTDMT_flushStream() or ZSTDMT_endStream()
* depending on flush directive.
* @return : minimum amount of data still to be flushed
* 0 if fully flushed
* or an error code
* note : needs to be init using any ZSTD_initCStream*() variant */
-ZSTDMT_API size_t ZSTDMT_compressStream_generic(ZSTDMT_CCtx* mtctx,
- ZSTD_outBuffer* output,
- ZSTD_inBuffer* input,
- ZSTD_EndDirective endOp);
+size_t ZSTDMT_compressStream_generic(ZSTDMT_CCtx* mtctx,
+ ZSTD_outBuffer* output,
+ ZSTD_inBuffer* input,
+ ZSTD_EndDirective endOp);
-
-/* ========================================================
- * === Private interface, for use by ZSTD_compress.c ===
- * === Not exposed in libzstd. Never invoke directly ===
- * ======================================================== */
-
/*! ZSTDMT_toFlushNow()
* Tell how many bytes are ready to be flushed immediately.
* Probe the oldest active job (not yet entirely flushed) and check its output buffer.
* If return 0, it means there is no active job,
* or, it means oldest job is still active, but everything produced has been flushed so far,
* therefore flushing is limited by speed of oldest job. */
size_t ZSTDMT_toFlushNow(ZSTDMT_CCtx* mtctx);
-/*! ZSTDMT_CCtxParam_setMTCtxParameter()
- * like ZSTDMT_setMTCtxParameter(), but into a ZSTD_CCtx_Params */
-size_t ZSTDMT_CCtxParam_setMTCtxParameter(ZSTD_CCtx_params* params, ZSTDMT_parameter parameter, int value);
-
-/*! ZSTDMT_CCtxParam_setNbWorkers()
- * Set nbWorkers, and clamp it.
- * Also reset jobSize and overlapLog */
-size_t ZSTDMT_CCtxParam_setNbWorkers(ZSTD_CCtx_params* params, unsigned nbWorkers);
-
/*! ZSTDMT_updateCParams_whileCompressing() :
* Updates only a selected set of compression parameters, to remain compatible with current frame.
* New parameters will be applied to next compression job. */
void ZSTDMT_updateCParams_whileCompressing(ZSTDMT_CCtx* mtctx, const ZSTD_CCtx_params* cctxParams);
/*! ZSTDMT_getFrameProgression():
* tells how much data has been consumed (input) and produced (output) for current frame.
* able to count progression inside worker threads.
*/
ZSTD_frameProgression ZSTDMT_getFrameProgression(ZSTDMT_CCtx* mtctx);
-
-
-/*! ZSTDMT_initCStream_internal() :
- * Private use only. Init streaming operation.
- * expects params to be valid.
- * must receive dict, or cdict, or none, but not both.
- * @return : 0, or an error code */
-size_t ZSTDMT_initCStream_internal(ZSTDMT_CCtx* zcs,
- const void* dict, size_t dictSize, ZSTD_dictContentType_e dictContentType,
- const ZSTD_CDict* cdict,
- ZSTD_CCtx_params params, unsigned long long pledgedSrcSize);
#if defined (__cplusplus)
}
#endif