client.rb in aws-sdk-autoscaling-1.33.0

- old
+ new

@@ -28,10 +28,22 @@
 require 'aws-sdk-core/plugins/protocols/query.rb'
 
 Aws::Plugins::GlobalConfiguration.add_identifier(:autoscaling)
 
 module Aws::AutoScaling
+  # An API client for AutoScaling.  To construct a client, you need to configure a `:region` and `:credentials`.
+  #
+  #     client = Aws::AutoScaling::Client.new(
+  #       region: region_name,
+  #       credentials: credentials,
+  #       # ...
+  #     )
+  #
+  # For details on configuring region and credentials see
+  # the [developer guide](/sdk-for-ruby/v3/developer-guide/setup-config.html).
+  #
+  # See {#initialize} for a full list of supported configuration options.
   class Client < Seahorse::Client::Base
 
     include Aws::ClientStubs
 
     @identifier = :autoscaling
@@ -106,10 +118,16 @@
     #
     #   @option options [Boolean] :active_endpoint_cache (false)
     #     When set to `true`, a thread polling for endpoints will be running in
     #     the background every 60 secs (default). Defaults to `false`.
     #
+    #   @option options [Boolean] :adaptive_retry_wait_to_fill (true)
+    #     Used only in `adaptive` retry mode.  When true, the request will sleep
+    #     until there is sufficent client side capacity to retry the request.
+    #     When false, the request will raise a `RetryCapacityNotAvailableError` and will
+    #     not retry instead of sleeping.
+    #
     #   @option options [Boolean] :client_side_monitoring (false)
     #     When `true`, client-side metrics will be collected for all API requests from
     #     this client.
     #
     #   @option options [String] :client_side_monitoring_client_id ("")
@@ -130,10 +148,14 @@
     #
     #   @option options [Boolean] :convert_params (true)
     #     When `true`, an attempt is made to coerce request parameters into
     #     the required types.
     #
+    #   @option options [Boolean] :correct_clock_skew (true)
+    #     Used only in `standard` and adaptive retry modes. Specifies whether to apply
+    #     a clock skew correction and retry requests with skewed client clocks.
+    #
     #   @option options [Boolean] :disable_host_prefix_injection (false)
     #     Set to true to disable SDK automatically adding host prefix
     #     to default service endpoint when available.
     #
     #   @option options [String] :endpoint
@@ -164,32 +186,65 @@
     #
     #   @option options [Logger] :logger
     #     The Logger instance to send log messages to.  If this option
     #     is not set, logging will be disabled.
     #
+    #   @option options [Integer] :max_attempts (3)
+    #     An integer representing the maximum number attempts that will be made for
+    #     a single request, including the initial attempt.  For example,
+    #     setting this value to 5 will result in a request being retried up to
+    #     4 times. Used in `standard` and `adaptive` retry modes.
+    #
     #   @option options [String] :profile ("default")
     #     Used when loading credentials from the shared credentials file
     #     at HOME/.aws/credentials.  When not specified, 'default' is used.
     #
+    #   @option options [Proc] :retry_backoff
+    #     A proc or lambda used for backoff. Defaults to 2**retries * retry_base_delay.
+    #     This option is only used in the `legacy` retry mode.
+    #
     #   @option options [Float] :retry_base_delay (0.3)
-    #     The base delay in seconds used by the default backoff function.
+    #     The base delay in seconds used by the default backoff function. This option
+    #     is only used in the `legacy` retry mode.
     #
     #   @option options [Symbol] :retry_jitter (:none)
-    #     A delay randomiser function used by the default backoff function. Some predefined functions can be referenced by name - :none, :equal, :full, otherwise a Proc that takes and returns a number.
+    #     A delay randomiser function used by the default backoff function.
+    #     Some predefined functions can be referenced by name - :none, :equal, :full,
+    #     otherwise a Proc that takes and returns a number. This option is only used
+    #     in the `legacy` retry mode.
     #
     #     @see https://www.awsarchitectureblog.com/2015/03/backoff.html
     #
     #   @option options [Integer] :retry_limit (3)
     #     The maximum number of times to retry failed requests.  Only
     #     ~ 500 level server errors and certain ~ 400 level client errors
     #     are retried.  Generally, these are throttling errors, data
-    #     checksum errors, networking errors, timeout errors and auth
-    #     errors from expired credentials.
+    #     checksum errors, networking errors, timeout errors, auth errors,
+    #     endpoint discovery, and errors from expired credentials.
+    #     This option is only used in the `legacy` retry mode.
     #
     #   @option options [Integer] :retry_max_delay (0)
-    #     The maximum number of seconds to delay between retries (0 for no limit) used by the default backoff function.
+    #     The maximum number of seconds to delay between retries (0 for no limit)
+    #     used by the default backoff function. This option is only used in the
+    #     `legacy` retry mode.
     #
+    #   @option options [String] :retry_mode ("legacy")
+    #     Specifies which retry algorithm to use. Values are:
+    #
+    #     * `legacy` - The pre-existing retry behavior.  This is default value if
+    #       no retry mode is provided.
+    #
+    #     * `standard` - A standardized set of retry rules across the AWS SDKs.
+    #       This includes support for retry quotas, which limit the number of
+    #       unsuccessful retries a client can make.
+    #
+    #     * `adaptive` - An experimental retry mode that includes all the
+    #       functionality of `standard` mode along with automatic client side
+    #       throttling.  This is a provisional mode that may change behavior
+    #       in the future.
+    #
+    #
     #   @option options [String] :secret_access_key
     #
     #   @option options [String] :session_token
     #
     #   @option options [Boolean] :stub_responses (false)
@@ -207,29 +262,29 @@
     #
     #   @option options [URI::HTTP,String] :http_proxy A proxy to send
     #     requests through.  Formatted like 'http://proxy.com:123'.
     #
     #   @option options [Float] :http_open_timeout (15) The number of
-    #     seconds to wait when opening a HTTP session before rasing a
+    #     seconds to wait when opening a HTTP session before raising a
     #     `Timeout::Error`.
     #
     #   @option options [Integer] :http_read_timeout (60) The default
     #     number of seconds to wait for response data.  This value can
     #     safely be set
-    #     per-request on the session yeidled by {#session_for}.
+    #     per-request on the session yielded by {#session_for}.
     #
     #   @option options [Float] :http_idle_timeout (5) The number of
-    #     seconds a connection is allowed to sit idble before it is
+    #     seconds a connection is allowed to sit idle before it is
     #     considered stale.  Stale connections are closed and removed
     #     from the pool before making a request.
     #
     #   @option options [Float] :http_continue_timeout (1) The number of
     #     seconds to wait for a 100-continue response before sending the
     #     request body.  This option has no effect unless the request has
     #     "Expect" header set to "100-continue".  Defaults to `nil` which
     #     disables this behaviour.  This value can safely be set per
-    #     request on the session yeidled by {#session_for}.
+    #     request on the session yielded by {#session_for}.
     #
     #   @option options [Boolean] :http_wire_trace (false) When `true`,
     #     HTTP debug output will be sent to the `:logger`.
     #
     #   @option options [Boolean] :ssl_verify_peer (true) When `true`,
@@ -4819,10 +4874,10 @@
         operation: config.api.operation(operation_name),
         client: self,
         params: params,
         config: config)
       context[:gem_name] = 'aws-sdk-autoscaling'
-      context[:gem_version] = '1.32.0'
+      context[:gem_version] = '1.33.0'
       Seahorse::Client::Request.new(handlers, context)
     end
 
     # Polls an API operation until a resource enters a desired state.
     #