#GAction represents a single named action.
The main interface to an action is that it can be activated with
g_action_activate(). This results in the 'activate' signal being
emitted. An activation has a #GVariant parameter (which may be
%NULL). The correct type for the parameter is determined by a static
parameter type (which is given at construction time).
An action may optionally have a state, in which case the state may be
set with g_action_change_state(). This call takes a #GVariant. The
correct type for the state is determined by a static state type
(which is given at construction time).
The state may have a hint associated with it, specifying its valid
range.
#GAction is merely the interface to the concept of an action, as
described above. Various implementations of actions exist, including
#GSimpleAction and #GtkAction.
In all cases, the implementing class is responsible for storing the
name of the action, the parameter type, the enabled state, the
optional state type and the state and emitting the appropriate
signals when these change. The implementor responsible for filtering
calls to g_action_activate() and g_action_change_state() for type
safety and for the state being enabled.
Probably the only useful thing to do with a #GAction is to put it
inside of a #GSimpleActionGroup.
Checks if @action_name is valid.
@action_name is valid if it consists only of alphanumeric characters,
plus '-' and '.'. The empty string is not a valid action name.
It is an error to call this function with a non-utf8 @action_name.
@action_name must not be %NULL.
%TRUE if @action_name is valid
an potential action name
Parses a detailed action name into its separate name and target
components.
Detailed action names can have three formats.
The first format is used to represent an action name with no target
value and consists of just an action name containing no whitespace
nor the characters ':', '(' or ')'. For example: "app.action".
The second format is used to represent an action with a target value
that is a non-empty string consisting only of alphanumerics, plus '-'
and '.'. In that case, the action name and target value are
separated by a double colon ("::"). For example:
"app.action::target".
The third format is used to represent an action with any type of
target value, including strings. The target value follows the action
name, surrounded in parens. For example: "app.action(42)". The
target value is parsed using g_variant_parse(). If a tuple-typed
value is desired, it must be specified in the same way, resulting in
two sets of parens, for example: "app.action((1,2,3))". A string
target can be specified this way as well: "app.action('target')".
For strings, this third format must be used if * target value is
empty or contains characters other than alphanumerics, '-' and '.'.
%TRUE if successful, else %FALSE with @error set
a detailed action name
the action name
the target value, or %NULL for no target
Formats a detailed action name from @action_name and @target_value.
It is an error to call this function with an invalid action name.
This function is the opposite of
g_action_parse_detailed_action_name(). It will produce a string that
can be parsed back to the @action_name and @target_value by that
function.
See that function for the types of strings that will be printed by
this function.
a detailed format string
a valid action name
Activates the action.
@parameter must be the correct type of parameter for the action (ie:
the parameter type given at construction time). If the parameter
type was %NULL then @parameter must also be %NULL.
If the @parameter GVariant is floating, it is consumed.
the parameter to the activation
Request for the state of @action to be changed to @value.
The action must be stateful and @value must be of the correct type.
See g_action_get_state_type().
This call merely requests a change. The action may refuse to change
its state or may change its state to something other than @value.
See g_action_get_state_hint().
If the @value GVariant is floating, it is consumed.
the new state
Checks if @action is currently enabled.
An action must be enabled in order to be activated or in order to
have its state changed from outside callers.
whether the action is enabled
Queries the name of @action.
the name of the action
Queries the type of the parameter that must be given when activating
@action.
When activating the action using g_action_activate(), the #GVariant
given to that function must be of the type returned by this function.
In the case that this function returns %NULL, you must not give any
#GVariant, but %NULL instead.
the parameter type
Queries the current state of @action.
If the action is not stateful then %NULL will be returned. If the
action is stateful then the type of the return value is the type
given by g_action_get_state_type().
The return value (if non-%NULL) should be freed with
g_variant_unref() when it is no longer required.
the current state of the action
Requests a hint about the valid range of values for the state of
@action.
If %NULL is returned it either means that the action is not stateful
or that there is no hint about the valid range of values for the
state of the action.
If a #GVariant array is returned then each item in the array is a
possible value for the state. If a #GVariant pair (ie: two-tuple) is
returned then the tuple specifies the inclusive lower and upper bound
of valid values for the state.
In any case, the information is merely a hint. It may be possible to
have a state value outside of the hinted range and setting a value
within the range may fail.
The return value (if non-%NULL) should be freed with
g_variant_unref() when it is no longer required.
the state range hint
Queries the type of the state of @action.
If the action is stateful (e.g. created with
g_simple_action_new_stateful()) then this function returns the
#GVariantType of the state. This is the type of the initial value
given as the state. All calls to g_action_change_state() must give a
#GVariant of this type and g_action_get_state() will return a
#GVariant of the same type.
If the action is not stateful (e.g. created with g_simple_action_new())
then this function will return %NULL. In that case, g_action_get_state()
will return %NULL and you must not call g_action_change_state().
the state type, if the action is stateful
Activates the action.
@parameter must be the correct type of parameter for the action (ie:
the parameter type given at construction time). If the parameter
type was %NULL then @parameter must also be %NULL.
If the @parameter GVariant is floating, it is consumed.
a #GAction
the parameter to the activation
Request for the state of @action to be changed to @value.
The action must be stateful and @value must be of the correct type.
See g_action_get_state_type().
This call merely requests a change. The action may refuse to change
its state or may change its state to something other than @value.
See g_action_get_state_hint().
If the @value GVariant is floating, it is consumed.
a #GAction
the new state
Checks if @action is currently enabled.
An action must be enabled in order to be activated or in order to
have its state changed from outside callers.
whether the action is enabled
a #GAction
Queries the name of @action.
the name of the action
a #GAction
Queries the type of the parameter that must be given when activating
@action.
When activating the action using g_action_activate(), the #GVariant
given to that function must be of the type returned by this function.
In the case that this function returns %NULL, you must not give any
#GVariant, but %NULL instead.
the parameter type
a #GAction
Queries the current state of @action.
If the action is not stateful then %NULL will be returned. If the
action is stateful then the type of the return value is the type
given by g_action_get_state_type().
The return value (if non-%NULL) should be freed with
g_variant_unref() when it is no longer required.
the current state of the action
a #GAction
Requests a hint about the valid range of values for the state of
@action.
If %NULL is returned it either means that the action is not stateful
or that there is no hint about the valid range of values for the
state of the action.
If a #GVariant array is returned then each item in the array is a
possible value for the state. If a #GVariant pair (ie: two-tuple) is
returned then the tuple specifies the inclusive lower and upper bound
of valid values for the state.
In any case, the information is merely a hint. It may be possible to
have a state value outside of the hinted range and setting a value
within the range may fail.
The return value (if non-%NULL) should be freed with
g_variant_unref() when it is no longer required.
the state range hint
a #GAction
Queries the type of the state of @action.
If the action is stateful (e.g. created with
g_simple_action_new_stateful()) then this function returns the
#GVariantType of the state. This is the type of the initial value
given as the state. All calls to g_action_change_state() must give a
#GVariant of this type and g_action_get_state() will return a
#GVariant of the same type.
If the action is not stateful (e.g. created with g_simple_action_new())
then this function will return %NULL. In that case, g_action_get_state()
will return %NULL and you must not call g_action_change_state().
the state type, if the action is stateful
a #GAction
If @action is currently enabled.
If the action is disabled then calls to g_action_activate() and
g_action_change_state() have no effect.
The name of the action. This is mostly meaningful for identifying
the action once it has been added to a #GActionGroup.
The type of the parameter that must be given when activating the
action.
The state of the action, or %NULL if the action is stateless.
The #GVariantType of the state that the action has, or %NULL if the
action is stateless.
This struct defines a single action. It is for use with
g_action_map_add_action_entries().
The order of the items in the structure are intended to reflect
frequency of use. It is permissible to use an incomplete initialiser
in order to leave some of the later values as %NULL. All values
after @name are optional. Additional optional fields may be added in
the future.
See g_action_map_add_action_entries() for an example.
#GActionGroup represents a group of actions. Actions can be used to
expose functionality in a structured way, either from one part of a
program to another, or to the outside world. Action groups are often
used together with a #GMenuModel that provides additional
representation data for displaying the actions to the user, e.g. in
a menu.
The main way to interact with the actions in a GActionGroup is to
activate them with g_action_group_activate_action(). Activating an
action may require a #GVariant parameter. The required type of the
parameter can be inquired with g_action_group_get_action_parameter_type().
Actions may be disabled, see g_action_group_get_action_enabled().
Activating a disabled action has no effect.
Actions may optionally have a state in the form of a #GVariant. The
current state of an action can be inquired with
g_action_group_get_action_state(). Activating a stateful action may
change its state, but it is also possible to set the state by calling
g_action_group_change_action_state().
As typical example, consider a text editing application which has an
option to change the current font to 'bold'. A good way to represent
this would be a stateful action, with a boolean state. Activating the
action would toggle the state.
Each action in the group has a unique name (which is a string). All
method calls, except g_action_group_list_actions() take the name of
an action as an argument.
The #GActionGroup API is meant to be the 'public' API to the action
group. The calls here are exactly the interaction that 'external
forces' (eg: UI, incoming D-Bus messages, etc.) are supposed to have
with actions. 'Internal' APIs (ie: ones meant only to be accessed by
the action group implementation) are found on subclasses. This is
why you will find - for example - g_action_group_get_action_enabled()
but not an equivalent <function>set()</function> call.
Signals are emitted on the action group in response to state changes
on individual actions.
Implementations of #GActionGroup should provide implementations for
the virtual functions g_action_group_list_actions() and
g_action_group_query_action(). The other virtual functions should
not be implemented - their "wrappers" are actually implemented with
calls to g_action_group_query_action().
Emits the #GActionGroup::action-added signal on @action_group.
This function should only be called by #GActionGroup implementations.
the name of an action in the group
Emits the #GActionGroup::action-enabled-changed signal on @action_group.
This function should only be called by #GActionGroup implementations.
the name of an action in the group
whether or not the action is now enabled
Emits the #GActionGroup::action-removed signal on @action_group.
This function should only be called by #GActionGroup implementations.
the name of an action in the group
Emits the #GActionGroup::action-state-changed signal on @action_group.
This function should only be called by #GActionGroup implementations.
the name of an action in the group
the new state of the named action
Activate the named action within @action_group.
If the action is expecting a parameter, then the correct type of
parameter must be given as @parameter. If the action is expecting no
parameters then @parameter must be %NULL. See
g_action_group_get_action_parameter_type().
the name of the action to activate
parameters to the activation
Request for the state of the named action within @action_group to be
changed to @value.
The action must be stateful and @value must be of the correct type.
See g_action_group_get_action_state_type().
This call merely requests a change. The action may refuse to change
its state or may change its state to something other than @value.
See g_action_group_get_action_state_hint().
If the @value GVariant is floating, it is consumed.
the name of the action to request the change on
the new state
Checks if the named action within @action_group is currently enabled.
An action must be enabled in order to be activated or in order to
have its state changed from outside callers.
whether or not the action is currently enabled
the name of the action to query
Queries the type of the parameter that must be given when activating
the named action within @action_group.
When activating the action using g_action_group_activate_action(),
the #GVariant given to that function must be of the type returned
by this function.
In the case that this function returns %NULL, you must not give any
#GVariant, but %NULL instead.
The parameter type of a particular action will never change but it is
possible for an action to be removed and for a new action to be added
with the same name but a different parameter type.
the parameter type
the name of the action to query
Queries the current state of the named action within @action_group.
If the action is not stateful then %NULL will be returned. If the
action is stateful then the type of the return value is the type
given by g_action_group_get_action_state_type().
The return value (if non-%NULL) should be freed with
g_variant_unref() when it is no longer required.
the current state of the action
the name of the action to query
Requests a hint about the valid range of values for the state of the
named action within @action_group.
If %NULL is returned it either means that the action is not stateful
or that there is no hint about the valid range of values for the
state of the action.
If a #GVariant array is returned then each item in the array is a
possible value for the state. If a #GVariant pair (ie: two-tuple) is
returned then the tuple specifies the inclusive lower and upper bound
of valid values for the state.
In any case, the information is merely a hint. It may be possible to
have a state value outside of the hinted range and setting a value
within the range may fail.
The return value (if non-%NULL) should be freed with
g_variant_unref() when it is no longer required.
the state range hint
the name of the action to query
Queries the type of the state of the named action within
@action_group.
If the action is stateful then this function returns the
#GVariantType of the state. All calls to
g_action_group_change_action_state() must give a #GVariant of this
type and g_action_group_get_action_state() will return a #GVariant
of the same type.
If the action is not stateful then this function will return %NULL.
In that case, g_action_group_get_action_state() will return %NULL
and you must not call g_action_group_change_action_state().
The state type of a particular action will never change but it is
possible for an action to be removed and for a new action to be added
with the same name but a different state type.
the state type, if the action is stateful
the name of the action to query
Checks if the named action exists within @action_group.
whether the named action exists
the name of the action to check for
Lists the actions contained within @action_group.
The caller is responsible for freeing the list with g_strfreev() when
it is no longer required.
a %NULL-terminated array of the names of the actions in the groupb
Queries all aspects of the named action within an @action_group.
This function acquires the information available from
g_action_group_has_action(), g_action_group_get_action_enabled(),
g_action_group_get_action_parameter_type(),
g_action_group_get_action_state_type(),
g_action_group_get_action_state_hint() and
g_action_group_get_action_state() with a single function call.
This provides two main benefits.
The first is the improvement in efficiency that comes with not having
to perform repeated lookups of the action in order to discover
different things about it. The second is that implementing
#GActionGroup can now be done by only overriding this one virtual
function.
The interface provides a default implementation of this function that
calls the individual functions, as required, to fetch the
information. The interface also provides default implementations of
those functions that call this function. All implementations,
therefore, must override either this function or all of the others.
If the action exists, %TRUE is returned and any of the requested
fields (as indicated by having a non-%NULL reference passed in) are
filled. If the action doesn't exist, %FALSE is returned and the
fields may or may not have been modified.
%TRUE if the action exists, else %FALSE
the name of an action in the group
if the action is presently enabled
the parameter type, or %NULL if none needed
the state type, or %NULL if stateless
the state hint, or %NULL if none
the current state, or %NULL if stateless
Emits the #GActionGroup::action-added signal on @action_group.
This function should only be called by #GActionGroup implementations.
a #GActionGroup
the name of an action in the group
Emits the #GActionGroup::action-enabled-changed signal on @action_group.
This function should only be called by #GActionGroup implementations.
a #GActionGroup
the name of an action in the group
whether or not the action is now enabled
Emits the #GActionGroup::action-removed signal on @action_group.
This function should only be called by #GActionGroup implementations.
a #GActionGroup
the name of an action in the group
Emits the #GActionGroup::action-state-changed signal on @action_group.
This function should only be called by #GActionGroup implementations.
a #GActionGroup
the name of an action in the group
the new state of the named action
Activate the named action within @action_group.
If the action is expecting a parameter, then the correct type of
parameter must be given as @parameter. If the action is expecting no
parameters then @parameter must be %NULL. See
g_action_group_get_action_parameter_type().
a #GActionGroup
the name of the action to activate
parameters to the activation
Request for the state of the named action within @action_group to be
changed to @value.
The action must be stateful and @value must be of the correct type.
See g_action_group_get_action_state_type().
This call merely requests a change. The action may refuse to change
its state or may change its state to something other than @value.
See g_action_group_get_action_state_hint().
If the @value GVariant is floating, it is consumed.
a #GActionGroup
the name of the action to request the change on
the new state
Checks if the named action within @action_group is currently enabled.
An action must be enabled in order to be activated or in order to
have its state changed from outside callers.
whether or not the action is currently enabled
a #GActionGroup
the name of the action to query
Queries the type of the parameter that must be given when activating
the named action within @action_group.
When activating the action using g_action_group_activate_action(),
the #GVariant given to that function must be of the type returned
by this function.
In the case that this function returns %NULL, you must not give any
#GVariant, but %NULL instead.
The parameter type of a particular action will never change but it is
possible for an action to be removed and for a new action to be added
with the same name but a different parameter type.
the parameter type
a #GActionGroup
the name of the action to query
Queries the current state of the named action within @action_group.
If the action is not stateful then %NULL will be returned. If the
action is stateful then the type of the return value is the type
given by g_action_group_get_action_state_type().
The return value (if non-%NULL) should be freed with
g_variant_unref() when it is no longer required.
the current state of the action
a #GActionGroup
the name of the action to query
Requests a hint about the valid range of values for the state of the
named action within @action_group.
If %NULL is returned it either means that the action is not stateful
or that there is no hint about the valid range of values for the
state of the action.
If a #GVariant array is returned then each item in the array is a
possible value for the state. If a #GVariant pair (ie: two-tuple) is
returned then the tuple specifies the inclusive lower and upper bound
of valid values for the state.
In any case, the information is merely a hint. It may be possible to
have a state value outside of the hinted range and setting a value
within the range may fail.
The return value (if non-%NULL) should be freed with
g_variant_unref() when it is no longer required.
the state range hint
a #GActionGroup
the name of the action to query
Queries the type of the state of the named action within
@action_group.
If the action is stateful then this function returns the
#GVariantType of the state. All calls to
g_action_group_change_action_state() must give a #GVariant of this
type and g_action_group_get_action_state() will return a #GVariant
of the same type.
If the action is not stateful then this function will return %NULL.
In that case, g_action_group_get_action_state() will return %NULL
and you must not call g_action_group_change_action_state().
The state type of a particular action will never change but it is
possible for an action to be removed and for a new action to be added
with the same name but a different state type.
the state type, if the action is stateful
a #GActionGroup
the name of the action to query
Checks if the named action exists within @action_group.
whether the named action exists
a #GActionGroup
the name of the action to check for
Lists the actions contained within @action_group.
The caller is responsible for freeing the list with g_strfreev() when
it is no longer required.
a %NULL-terminated array of the names of the actions in the groupb
a #GActionGroup
Queries all aspects of the named action within an @action_group.
This function acquires the information available from
g_action_group_has_action(), g_action_group_get_action_enabled(),
g_action_group_get_action_parameter_type(),
g_action_group_get_action_state_type(),
g_action_group_get_action_state_hint() and
g_action_group_get_action_state() with a single function call.
This provides two main benefits.
The first is the improvement in efficiency that comes with not having
to perform repeated lookups of the action in order to discover
different things about it. The second is that implementing
#GActionGroup can now be done by only overriding this one virtual
function.
The interface provides a default implementation of this function that
calls the individual functions, as required, to fetch the
information. The interface also provides default implementations of
those functions that call this function. All implementations,
therefore, must override either this function or all of the others.
If the action exists, %TRUE is returned and any of the requested
fields (as indicated by having a non-%NULL reference passed in) are
filled. If the action doesn't exist, %FALSE is returned and the
fields may or may not have been modified.
%TRUE if the action exists, else %FALSE
a #GActionGroup
the name of an action in the group
if the action is presently enabled
the parameter type, or %NULL if none needed
the state type, or %NULL if stateless
the state hint, or %NULL if none
the current state, or %NULL if stateless
Signals that a new action was just added to the group.
This signal is emitted after the action has been added
and is now visible.
the name of the action in @action_group
Signals that the enabled status of the named action has changed.
the name of the action in @action_group
whether the action is enabled or not
Signals that an action is just about to be removed from the group.
This signal is emitted before the action is removed, so the action
is still visible and can be queried from the signal handler.
the name of the action in @action_group
Signals that the state of the named action has changed.
the name of the action in @action_group
the new value of the state
The virtual function table for #GActionGroup.
whether the named action exists
the name of the action to check for
a %NULL-terminated array of the names of the actions in the groupb
whether or not the action is currently enabled
the name of the action to query
the parameter type
the name of the action to query
the state type, if the action is stateful
the name of the action to query
the state range hint
the name of the action to query
the current state of the action
the name of the action to query
the name of the action to request the change on
the new state
the name of the action to activate
parameters to the activation
the name of an action in the group
the name of an action in the group
the name of an action in the group
whether or not the action is now enabled
the name of an action in the group
the new state of the named action
%TRUE if the action exists, else %FALSE
the name of an action in the group
if the action is presently enabled
the parameter type, or %NULL if none needed
the state type, or %NULL if stateless
the state hint, or %NULL if none
the current state, or %NULL if stateless
The virtual function table for #GAction.
the name of the action
the parameter type
the state type, if the action is stateful
the state range hint
whether the action is enabled
the current state of the action
the new state
the parameter to the activation
The GActionMap interface is implemented by #GActionGroup
implementations that operate by containing a number of
named #GAction instances, such as #GSimpleActionGroup.
One useful application of this interface is to map the
names of actions from various action groups to unique,
prefixed names (e.g. by prepending "app." or "win.").
This is the motivation for the 'Map' part of the interface
name.
Adds an action to the @action_map.
If the action map already contains an action with the same name
as @action then the old action is dropped from the action map.
The action map takes its own reference on @action.
a #GAction
Looks up the action with the name @action_name in @action_map.
If no such action exists, returns %NULL.
a #GAction, or %NULL
the name of an action
Removes the named action from the action map.
If no action of this name is in the map then nothing happens.
the name of the action
Adds an action to the @action_map.
If the action map already contains an action with the same name
as @action then the old action is dropped from the action map.
The action map takes its own reference on @action.
a #GActionMap
a #GAction
A convenience function for creating multiple #GSimpleAction instances
and adding them to a #GActionMap.
Each action is constructed as per one #GActionEntry.
<example>
<title>Using g_action_map_add_action_entries()</title>
<programlisting>
static void
activate_quit (GSimpleAction *simple,
GVariant *parameter,
gpointer user_data)
{
exit (0);
}
static void
activate_print_string (GSimpleAction *simple,
GVariant *parameter,
gpointer user_data)
{
g_print ("%s\n", g_variant_get_string (parameter, NULL));
}
static GActionGroup *
create_action_group (void)
{
const GActionEntry entries[] = {
{ "quit", activate_quit },
{ "print-string", activate_print_string, "s" }
};
GSimpleActionGroup *group;
group = g_simple_action_group_new ();
g_action_map_add_action_entries (G_ACTION_MAP (group), entries, G_N_ELEMENTS (entries), NULL);
return G_ACTION_GROUP (group);
}
</programlisting>
</example>
a #GActionMap
a pointer to the first item in an array of #GActionEntry structs
the length of @entries, or -1 if @entries is %NULL-terminated
the user data for signal connections
Looks up the action with the name @action_name in @action_map.
If no such action exists, returns %NULL.
a #GAction, or %NULL
a #GActionMap
the name of an action
Removes the named action from the action map.
If no action of this name is in the map then nothing happens.
a #GActionMap
the name of the action
The virtual function table for #GActionMap.
a #GAction, or %NULL
the name of an action
a #GAction
the name of the action
#GAppInfo and #GAppLaunchContext are used for describing and launching
applications installed on the system.
As of GLib 2.20, URIs will always be converted to POSIX paths
(using g_file_get_path()) when using g_app_info_launch() even if
the application requested an URI and not a POSIX path. For example
for an desktop-file based application with Exec key <literal>totem
%U</literal> and a single URI,
<literal>sftp://foo/file.avi</literal>, then
<literal>/home/user/.gvfs/sftp on foo/file.avi</literal> will be
passed. This will only work if a set of suitable GIO extensions
(such as gvfs 2.26 compiled with FUSE support), is available and
operational; if this is not the case, the URI will be passed
unmodified to the application. Some URIs, such as
<literal>mailto:</literal>, of course cannot be mapped to a POSIX
path (in gvfs there's no FUSE mount for it); such URIs will be
passed unmodified to the application.
Specifically for gvfs 2.26 and later, the POSIX URI will be mapped
back to the GIO URI in the #GFile constructors (since gvfs
implements the #GVfs extension point). As such, if the application
needs to examine the URI, it needs to use g_file_get_uri() or
similar on #GFile. In other words, an application cannot assume
that the URI passed to e.g. g_file_new_for_commandline_arg() is
equal to the result of g_file_get_uri(). The following snippet
illustrates this:
<programlisting>
GFile *f;
char *uri;
file = g_file_new_for_commandline_arg (uri_from_commandline);
uri = g_file_get_uri (file);
strcmp (uri, uri_from_commandline) == 0; // FALSE
g_free (uri);
if (g_file_has_uri_scheme (file, "cdda"))
{
// do something special with uri
}
g_object_unref (file);
</programlisting>
This code will work when both <literal>cdda://sr0/Track
1.wav</literal> and <literal>/home/user/.gvfs/cdda on sr0/Track
1.wav</literal> is passed to the application. It should be noted
that it's generally not safe for applications to rely on the format
of a particular URIs. Different launcher applications (e.g. file
managers) may have different ideas of what a given URI means.
Creates a new #GAppInfo from the given information.
Note that for @commandline, the quoting rules of the Exec key of the
<ulink url="http://freedesktop.org/Standards/desktop-entry-spec">freedesktop.org Desktop
Entry Specification</ulink> are applied. For example, if the @commandline contains
percent-encoded URIs, the percent-character must be doubled in order to prevent it from
being swallowed by Exec key unquoting. See the specification for exact quoting rules.
new #GAppInfo for given command.
the commandline to use
the application name, or %NULL to use @commandline
flags that can specify details of the created #GAppInfo
Gets a list of all of the applications currently registered
on this system.
For desktop files, this includes applications that have
<literal>NoDisplay=true</literal> set or are excluded from
display by means of <literal>OnlyShowIn</literal> or
<literal>NotShowIn</literal>. See g_app_info_should_show().
The returned list does not include applications which have
the <literal>Hidden</literal> key set.
a newly allocated #GList of references to #GAppInfo<!---->s.
Gets a list of all #GAppInfos for a given content type,
including the recommended and fallback #GAppInfos. See
g_app_info_get_recommended_for_type() and
g_app_info_get_fallback_for_type().
#GList of #GAppInfos for given @content_type or %NULL on error.
the content type to find a #GAppInfo for
Gets the default #GAppInfo for a given content type.
#GAppInfo for given @content_type or %NULL on error.
the content type to find a #GAppInfo for
if %TRUE, the #GAppInfo is expected to support URIs
Gets the default application for handling URIs with
the given URI scheme. A URI scheme is the initial part
of the URI, up to but not including the ':', e.g. "http",
"ftp" or "sip".
#GAppInfo for given @uri_scheme or %NULL on error.
a string containing a URI scheme.
Gets a list of fallback #GAppInfos for a given content type, i.e.
those applications which claim to support the given content type
by MIME type subclassing and not directly.
#GList of #GAppInfos for given @content_type or %NULL on error.
the content type to find a #GAppInfo for
Gets a list of recommended #GAppInfos for a given content type, i.e.
those applications which claim to support the given content type exactly,
and not by MIME type subclassing.
Note that the first application of the list is the last used one, i.e.
the last one for which g_app_info_set_as_last_used_for_type() has been
called.
#GList of #GAppInfos for given @content_type or %NULL on error.
the content type to find a #GAppInfo for
Utility function that launches the default application
registered to handle the specified uri. Synchronous I/O
is done on the uri to detect the type of the file if
required.
%TRUE on success, %FALSE on error.
the uri to show
an optional #GAppLaunchContext.
Removes all changes to the type associations done by
g_app_info_set_as_default_for_type(),
g_app_info_set_as_default_for_extension(),
g_app_info_add_supports_type() or
g_app_info_remove_supports_type().
a content type
Adds a content type to the application information to indicate the
application is capable of opening files with the given content type.
%TRUE on success, %FALSE on error.
a string.
Obtains the information whether the #GAppInfo can be deleted.
See g_app_info_delete().
%TRUE if @appinfo can be deleted
Checks if a supported content type can be removed from an application.
%TRUE if it is possible to remove supported content types from a given @appinfo, %FALSE if not.
Tries to delete a #GAppInfo.
On some platforms, there may be a difference between user-defined
#GAppInfo<!-- -->s which can be deleted, and system-wide ones which
cannot. See g_app_info_can_delete().
%TRUE if @appinfo has been deleted
Creates a duplicate of a #GAppInfo.
a duplicate of @appinfo.
Checks if two #GAppInfo<!-- -->s are equal.
%TRUE if @appinfo1 is equal to @appinfo2. %FALSE otherwise.
the second #GAppInfo.
Gets the commandline with which the application will be
started.
a string containing the @appinfo's commandline, or %NULL if this information is not available
Gets a human-readable description of an installed application.
a string containing a description of the application @appinfo, or %NULL if none.
Gets the display name of the application. The display name is often more
descriptive to the user than the name itself.
the display name of the application for @appinfo, or the name if no display name is available.
Gets the executable's name for the installed application.
a string containing the @appinfo's application binaries name
Gets the icon for the application.
the default #GIcon for @appinfo or %NULL if there is no default icon.
Gets the ID of an application. An id is a string that
identifies the application. The exact format of the id is
platform dependent. For instance, on Unix this is the
desktop file id from the xdg menu specification.
Note that the returned ID may be %NULL, depending on how
the @appinfo has been constructed.
a string containing the application's ID.
Gets the installed name of the application.
the name of the application for @appinfo.
Retrieves the list of content types that @app_info claims to support.
If this information is not provided by the environment, this function
will return %NULL.
This function does not take in consideration associations added with
g_app_info_add_supports_type(), but only those exported directly by
the application.
a list of content types.
Launches the application. Passes @files to the launched application
as arguments, using the optional @launch_context to get information
about the details of the launcher (like what screen it is on).
On error, @error will be set accordingly.
To launch the application without arguments pass a %NULL @files list.
Note that even if the launch is successful the application launched
can fail to start if it runs into problems during startup. There is
no way to detect this.
Some URIs can be changed when passed through a GFile (for instance
unsupported URIs with strange formats like mailto:), so if you have
a textual URI you want to pass in as argument, consider using
g_app_info_launch_uris() instead.
The launched application inherits the environment of the launching
process, but it can be modified with g_app_launch_context_setenv() and
g_app_launch_context_unsetenv().
On UNIX, this function sets the <envar>GIO_LAUNCHED_DESKTOP_FILE</envar>
environment variable with the path of the launched desktop file and
<envar>GIO_LAUNCHED_DESKTOP_FILE_PID</envar> to the process
id of the launched process. This can be used to ignore
<envar>GIO_LAUNCHED_DESKTOP_FILE</envar>, should it be inherited
by further processes. The <envar>DISPLAY</envar> and
<envar>DESKTOP_STARTUP_ID</envar> environment variables are also
set, based on information provided in @launch_context.
%TRUE on successful launch, %FALSE otherwise.
a #GList of #GFile objects
a #GAppLaunchContext or %NULL
Launches the application. This passes the @uris to the launched application
as arguments, using the optional @launch_context to get information
about the details of the launcher (like what screen it is on).
On error, @error will be set accordingly.
To launch the application without arguments pass a %NULL @uris list.
Note that even if the launch is successful the application launched
can fail to start if it runs into problems during startup. There is
no way to detect this.
%TRUE on successful launch, %FALSE otherwise.
a #GList containing URIs to launch.
a #GAppLaunchContext or %NULL
Removes a supported type from an application, if possible.
%TRUE on success, %FALSE on error.
a string.
Sets the application as the default handler for the given file extension.
%TRUE on success, %FALSE on error.
a string containing the file extension (without the dot).
Sets the application as the default handler for a given type.
%TRUE on success, %FALSE on error.
the content type.
Sets the application as the last used application for a given type.
This will make the application appear as first in the list returned
by g_app_info_get_recommended_for_type(), regardless of the default
application for that content type.
%TRUE on success, %FALSE on error.
the content type.
Checks if the application info should be shown in menus that
list available applications.
%TRUE if the @appinfo should be shown, %FALSE otherwise.
Checks if the application accepts files as arguments.
%TRUE if the @appinfo supports files.
Checks if the application supports reading files and directories from URIs.
%TRUE if the @appinfo supports URIs.
Adds a content type to the application information to indicate the
application is capable of opening files with the given content type.
%TRUE on success, %FALSE on error.
a #GAppInfo.
a string.
Obtains the information whether the #GAppInfo can be deleted.
See g_app_info_delete().
%TRUE if @appinfo can be deleted
a #GAppInfo
Checks if a supported content type can be removed from an application.
%TRUE if it is possible to remove supported content types from a given @appinfo, %FALSE if not.
a #GAppInfo.
Tries to delete a #GAppInfo.
On some platforms, there may be a difference between user-defined
#GAppInfo<!-- -->s which can be deleted, and system-wide ones which
cannot. See g_app_info_can_delete().
%TRUE if @appinfo has been deleted
a #GAppInfo
Creates a duplicate of a #GAppInfo.
a duplicate of @appinfo.
a #GAppInfo.
Checks if two #GAppInfo<!-- -->s are equal.
%TRUE if @appinfo1 is equal to @appinfo2. %FALSE otherwise.
the first #GAppInfo.
the second #GAppInfo.
Gets the commandline with which the application will be
started.
a string containing the @appinfo's commandline, or %NULL if this information is not available
a #GAppInfo
Gets a human-readable description of an installed application.
a string containing a description of the application @appinfo, or %NULL if none.
a #GAppInfo.
Gets the display name of the application. The display name is often more
descriptive to the user than the name itself.
the display name of the application for @appinfo, or the name if no display name is available.
a #GAppInfo.
Gets the executable's name for the installed application.
a string containing the @appinfo's application binaries name
a #GAppInfo
Gets the icon for the application.
the default #GIcon for @appinfo or %NULL if there is no default icon.
a #GAppInfo.
Gets the ID of an application. An id is a string that
identifies the application. The exact format of the id is
platform dependent. For instance, on Unix this is the
desktop file id from the xdg menu specification.
Note that the returned ID may be %NULL, depending on how
the @appinfo has been constructed.
a string containing the application's ID.
a #GAppInfo.
Gets the installed name of the application.
the name of the application for @appinfo.
a #GAppInfo.
Retrieves the list of content types that @app_info claims to support.
If this information is not provided by the environment, this function
will return %NULL.
This function does not take in consideration associations added with
g_app_info_add_supports_type(), but only those exported directly by
the application.
a list of content types.
a #GAppInfo that can handle files
Launches the application. Passes @files to the launched application
as arguments, using the optional @launch_context to get information
about the details of the launcher (like what screen it is on).
On error, @error will be set accordingly.
To launch the application without arguments pass a %NULL @files list.
Note that even if the launch is successful the application launched
can fail to start if it runs into problems during startup. There is
no way to detect this.
Some URIs can be changed when passed through a GFile (for instance
unsupported URIs with strange formats like mailto:), so if you have
a textual URI you want to pass in as argument, consider using
g_app_info_launch_uris() instead.
The launched application inherits the environment of the launching
process, but it can be modified with g_app_launch_context_setenv() and
g_app_launch_context_unsetenv().
On UNIX, this function sets the <envar>GIO_LAUNCHED_DESKTOP_FILE</envar>
environment variable with the path of the launched desktop file and
<envar>GIO_LAUNCHED_DESKTOP_FILE_PID</envar> to the process
id of the launched process. This can be used to ignore
<envar>GIO_LAUNCHED_DESKTOP_FILE</envar>, should it be inherited
by further processes. The <envar>DISPLAY</envar> and
<envar>DESKTOP_STARTUP_ID</envar> environment variables are also
set, based on information provided in @launch_context.
%TRUE on successful launch, %FALSE otherwise.
a #GAppInfo
a #GList of #GFile objects
a #GAppLaunchContext or %NULL
Launches the application. This passes the @uris to the launched application
as arguments, using the optional @launch_context to get information
about the details of the launcher (like what screen it is on).
On error, @error will be set accordingly.
To launch the application without arguments pass a %NULL @uris list.
Note that even if the launch is successful the application launched
can fail to start if it runs into problems during startup. There is
no way to detect this.
%TRUE on successful launch, %FALSE otherwise.
a #GAppInfo
a #GList containing URIs to launch.
a #GAppLaunchContext or %NULL
Removes a supported type from an application, if possible.
%TRUE on success, %FALSE on error.
a #GAppInfo.
a string.
Sets the application as the default handler for the given file extension.
%TRUE on success, %FALSE on error.
a #GAppInfo.
a string containing the file extension (without the dot).
Sets the application as the default handler for a given type.
%TRUE on success, %FALSE on error.
a #GAppInfo.
the content type.
Sets the application as the last used application for a given type.
This will make the application appear as first in the list returned
by g_app_info_get_recommended_for_type(), regardless of the default
application for that content type.
%TRUE on success, %FALSE on error.
a #GAppInfo.
the content type.
Checks if the application info should be shown in menus that
list available applications.
%TRUE if the @appinfo should be shown, %FALSE otherwise.
a #GAppInfo.
Checks if the application accepts files as arguments.
%TRUE if the @appinfo supports files.
a #GAppInfo.
Checks if the application supports reading files and directories from URIs.
%TRUE if the @appinfo supports URIs.
a #GAppInfo.
Flags used when creating a #GAppInfo.
No flags.
Application opens in a terminal window.
Application supports URI arguments.
Application supports startup notification. Since 2.26
Application Information interface, for operating system portability.
a duplicate of @appinfo.
%TRUE if @appinfo1 is equal to @appinfo2. %FALSE otherwise.
the second #GAppInfo.
a string containing the application's ID.
the name of the application for @appinfo.
a string containing a description of the application @appinfo, or %NULL if none.
a string containing the @appinfo's application binaries name
the default #GIcon for @appinfo or %NULL if there is no default icon.
%TRUE on successful launch, %FALSE otherwise.
a #GList of #GFile objects
a #GAppLaunchContext or %NULL
%TRUE if the @appinfo supports URIs.
%TRUE if the @appinfo supports files.
%TRUE on successful launch, %FALSE otherwise.
a #GList containing URIs to launch.
a #GAppLaunchContext or %NULL
%TRUE if the @appinfo should be shown, %FALSE otherwise.
%TRUE on success, %FALSE on error.
the content type.
%TRUE on success, %FALSE on error.
a string containing the file extension (without the dot).
%TRUE on success, %FALSE on error.
a string.
%TRUE if it is possible to remove supported content types from a given @appinfo, %FALSE if not.
%TRUE on success, %FALSE on error.
a string.
%TRUE if @appinfo can be deleted
%TRUE if @appinfo has been deleted
a string containing the @appinfo's commandline, or %NULL if this information is not available
the display name of the application for @appinfo, or the name if no display name is available.
%TRUE on success, %FALSE on error.
the content type.
a list of content types.
Integrating the launch with the launching application. This is used to
handle for instance startup notification and launching the new application
on the same screen as the launching window.
Creates a new application launch context. This is not normally used,
instead you instantiate a subclass of this, such as #GdkAppLaunchContext.
a #GAppLaunchContext.
Gets the display string for the @context. This is used to ensure new
applications are started on the same display as the launching
application, by setting the <envar>DISPLAY</envar> environment variable.
a display string for the display.
a #GAppInfo
a #GList of #GFile objects
Initiates startup notification for the application and returns the
<envar>DESKTOP_STARTUP_ID</envar> for the launched operation,
if supported.
Startup notification IDs are defined in the <ulink
url="http://standards.freedesktop.org/startup-notification-spec/startup-notification-latest.txt">
FreeDesktop.Org Startup Notifications standard</ulink>.
a startup notification ID for the application, or %NULL if not supported.
a #GAppInfo
a #GList of of #GFile objects
Called when an application has failed to launch, so that it can cancel
the application startup notification started in g_app_launch_context_get_startup_notify_id().
the startup notification id that was returned by g_app_launch_context_get_startup_notify_id().
Gets the display string for the @context. This is used to ensure new
applications are started on the same display as the launching
application, by setting the <envar>DISPLAY</envar> environment variable.
a display string for the display.
a #GAppLaunchContext
a #GAppInfo
a #GList of #GFile objects
Gets the complete environment variable list to be passed to
the child process when @context is used to launch an application.
This is a %NULL-terminated array of strings, where each string has
the form <literal>KEY=VALUE</literal>.
the child's environment
a #GAppLaunchContext
Initiates startup notification for the application and returns the
<envar>DESKTOP_STARTUP_ID</envar> for the launched operation,
if supported.
Startup notification IDs are defined in the <ulink
url="http://standards.freedesktop.org/startup-notification-spec/startup-notification-latest.txt">
FreeDesktop.Org Startup Notifications standard</ulink>.
a startup notification ID for the application, or %NULL if not supported.
a #GAppLaunchContext
a #GAppInfo
a #GList of of #GFile objects
Called when an application has failed to launch, so that it can cancel
the application startup notification started in g_app_launch_context_get_startup_notify_id().
a #GAppLaunchContext.
the startup notification id that was returned by g_app_launch_context_get_startup_notify_id().
Arranges for @variable to be set to @value in the child's
environment when @context is used to launch an application.
a #GAppLaunchContext
the environment variable to set
the value for to set the variable to.
Arranges for @variable to be unset in the child's environment
when @context is used to launch an application.
a #GAppLaunchContext
the environment variable to remove
a display string for the display.
a #GAppInfo
a #GList of #GFile objects
a startup notification ID for the application, or %NULL if not supported.
a #GAppInfo
a #GList of of #GFile objects
the startup notification id that was returned by g_app_launch_context_get_startup_notify_id().
A #GApplication is the foundation of an application. It wraps some
low-level platform-specific services and is intended to act as the
foundation for higher-level application classes such as
#GtkApplication or #MxApplication. In general, you should not use
this class outside of a higher level framework.
GApplication provides convenient life cycle management by maintaining
a <firstterm>use count</firstterm> for the primary application instance.
The use count can be changed using g_application_hold() and
g_application_release(). If it drops to zero, the application exits.
Higher-level classes such as #GtkApplication employ the use count to
ensure that the application stays alive as long as it has any opened
windows.
Another feature that GApplication (optionally) provides is process
uniqueness. Applications can make use of this functionality by
providing a unique application ID. If given, only one application
with this ID can be running at a time per session. The session
concept is platform-dependent, but corresponds roughly to a graphical
desktop login. When your application is launched again, its
arguments are passed through platform communication to the already
running program. The already running instance of the program is
called the <firstterm>primary instance</firstterm>; for non-unique
applications this is the always the current instance.
On Linux, the D-Bus session bus is used for communication.
The use of #GApplication differs from some other commonly-used
uniqueness libraries (such as libunique) in important ways. The
application is not expected to manually register itself and check if
it is the primary instance. Instead, the <code>main()</code>
function of a #GApplication should do very little more than
instantiating the application instance, possibly connecting signal
handlers, then calling g_application_run(). All checks for
uniqueness are done internally. If the application is the primary
instance then the startup signal is emitted and the mainloop runs.
If the application is not the primary instance then a signal is sent
to the primary instance and g_application_run() promptly returns.
See the code examples below.
If used, the expected form of an application identifier is very close
to that of of a
<ulink url="http://dbus.freedesktop.org/doc/dbus-specification.html#message-protocol-names-interface">DBus bus name</ulink>.
Examples include: "com.example.MyApp", "org.example.internal-apps.Calculator".
For details on valid application identifiers, see g_application_id_is_valid().
On Linux, the application identifier is claimed as a well-known bus name
on the user's session bus. This means that the uniqueness of your
application is scoped to the current session. It also means that your
application may provide additional services (through registration of other
object paths) at that bus name. The registration of these object paths
should be done with the shared GDBus session bus. Note that due to the
internal architecture of GDBus, method calls can be dispatched at any time
(even if a main loop is not running). For this reason, you must ensure that
any object paths that you wish to register are registered before #GApplication
attempts to acquire the bus name of your application (which happens in
g_application_register()). Unfortunately, this means that you cannot use
g_application_get_is_remote() to decide if you want to register object paths.
GApplication also implements the #GActionGroup and #GActionMap
interfaces and lets you easily export actions by adding them with
g_action_map_add_action(). When invoking an action by calling
g_action_group_activate_action() on the application, it is always
invoked in the primary instance. The actions are also exported on
the session bus, and GIO provides the #GDBusActionGroup wrapper to
conveniently access them remotely. GIO provides a #GDBusMenuModel wrapper
for remote access to exported #GMenuModels.
There is a number of different entry points into a GApplication:
<itemizedlist>
<listitem>via 'Activate' (i.e. just starting the application)</listitem>
<listitem>via 'Open' (i.e. opening some files)</listitem>
<listitem>by handling a command-line</listitem>
<listitem>via activating an action</listitem>
</itemizedlist>
The #GApplication::startup signal lets you handle the application
initialization for all of these in a single place.
Regardless of which of these entry points is used to start the application,
GApplication passes some <firstterm id="platform-data">platform
data</firstterm> from the launching instance to the primary instance,
in the form of a #GVariant dictionary mapping strings to variants.
To use platform data, override the @before_emit or @after_emit virtual
functions in your #GApplication subclass. When dealing with
#GApplicationCommandLine objects, the platform data is directly
available via g_application_command_line_get_cwd(),
g_application_command_line_get_environ() and
g_application_command_line_get_platform_data().
As the name indicates, the platform data may vary depending on the
operating system, but it always includes the current directory (key
"cwd"), and optionally the environment (ie the set of environment
variables and their values) of the calling process (key "environ").
The environment is only added to the platform data if the
%G_APPLICATION_SEND_ENVIRONMENT flag is set. #GApplication subclasses
can add their own platform data by overriding the @add_platform_data
virtual function. For instance, #GtkApplication adds startup notification
data in this way.
To parse commandline arguments you may handle the
#GApplication::command-line signal or override the local_command_line()
vfunc, to parse them in either the primary instance or the local instance,
respectively.
<example id="gapplication-example-open"><title>Opening files with a GApplication</title>
<programlisting>
<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" parse="text" href="../../../../gio/tests/gapplication-example-open.c">
<xi:fallback>FIXME: MISSING XINCLUDE CONTENT</xi:fallback>
</xi:include>
</programlisting>
</example>
<example id="gapplication-example-actions"><title>A GApplication with actions</title>
<programlisting>
<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" parse="text" href="../../../../gio/tests/gapplication-example-actions.c">
<xi:fallback>FIXME: MISSING XINCLUDE CONTENT</xi:fallback>
</xi:include>
</programlisting>
</example>
<example id="gapplication-example-menu"><title>A GApplication with menus</title>
<programlisting>
<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" parse="text" href="../../../../gio/tests/gapplication-example-menu.c">
<xi:fallback>FIXME: MISSING XINCLUDE CONTENT</xi:fallback>
</xi:include>
</programlisting>
</example>
<example id="gapplication-example-dbushooks"><title>Using extra D-Bus hooks with a GApplication</title>
<programlisting>
<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" parse="text" href="../../../../gio/tests/gapplication-example-dbushooks.c">
<xi:fallback>FIXME: MISSING XINCLUDE CONTENT</xi:fallback>
</xi:include>
</programlisting>
</example>
Creates a new #GApplication instance.
If non-%NULL, the application id must be valid. See
g_application_id_is_valid().
If no application ID is given then some features of #GApplication
(most notably application uniqueness) will be disabled.
a new #GApplication instance
the application id
the application flags
Returns the default #GApplication instance for this process.
Normally there is only one #GApplication per process and it becomes
the default when it is created. You can exercise more control over
this by using g_application_set_default().
If there is no default application then %NULL is returned.
the default application for this process, or %NULL
Checks if @application_id is a valid application identifier.
A valid ID is required for calls to g_application_new() and
g_application_set_application_id().
For convenience, the restrictions on application identifiers are
reproduced here:
<itemizedlist>
<listitem>Application identifiers must contain only the ASCII characters "[A-Z][a-z][0-9]_-." and must not begin with a digit.</listitem>
<listitem>Application identifiers must contain at least one '.' (period) character (and thus at least three elements).</listitem>
<listitem>Application identifiers must not begin or end with a '.' (period) character.</listitem>
<listitem>Application identifiers must not contain consecutive '.' (period) characters.</listitem>
<listitem>Application identifiers must not exceed 255 characters.</listitem>
</itemizedlist>
%TRUE if @application_id is valid
a potential application identifier
Activates the application.
In essence, this results in the #GApplication::activate signal being
emitted in the primary instance.
The application must be registered before calling this function.
This virtual function is always invoked in the local instance. It
gets passed a pointer to a %NULL-terminated copy of @argv and is
expected to remove arguments that it handled (shifting up remaining
arguments).
The last argument to local_command_line() is a pointer to the @status
variable which can used to set the exit status that is returned from
g_application_run().
See g_application_run() for more details on #GApplication startup.
%TRUE if the commandline has been completely handled
array of command line arguments
exit status to fill after processing the command line.
Opens the given files.
In essence, this results in the #GApplication::open signal being emitted
in the primary instance.
@n_files must be greater than zero.
@hint is simply passed through to the ::open signal. It is
intended to be used by applications that have multiple modes for
opening files (eg: "view" vs "edit", etc). Unless you have a need
for this functionality, you should use "".
The application must be registered before calling this function
and it must have the %G_APPLICATION_HANDLES_OPEN flag set.
an array of #GFiles to open
the length of the @files array
a hint (or ""), but never %NULL
Activates the application.
In essence, this results in the #GApplication::activate signal being
emitted in the primary instance.
The application must be registered before calling this function.
a #GApplication
Gets the unique identifier for @application.
the identifier for @application, owned by @application
a #GApplication
Gets the #GDBusConnection being used by the application, or %NULL.
If #GApplication is using its D-Bus backend then this function will
return the #GDBusConnection being used for uniqueness and
communication with the desktop environment and other instances of the
application.
If #GApplication is not using D-Bus then this function will return
%NULL. This includes the situation where the D-Bus backend would
normally be in use but we were unable to connect to the bus.
This function must not be called before the application has been
registered. See g_application_get_is_registered().
a #GDBusConnection, or %NULL
a #GApplication
Gets the D-Bus object path being used by the application, or %NULL.
If #GApplication is using its D-Bus backend then this function will
return the D-Bus object path that #GApplication is using. If the
application is the primary instance then there is an object published
at this path. If the application is not the primary instance then
the result of this function is undefined.
If #GApplication is not using D-Bus then this function will return
%NULL. This includes the situation where the D-Bus backend would
normally be in use but we were unable to connect to the bus.
This function must not be called before the application has been
registered. See g_application_get_is_registered().
the object path, or %NULL
a #GApplication
Gets the flags for @application.
See #GApplicationFlags.
the flags for @application
a #GApplication
Gets the current inactivity timeout for the application.
This is the amount of time (in milliseconds) after the last call to
g_application_release() before the application stops running.
the timeout, in milliseconds
a #GApplication
Checks if @application is registered.
An application is registered if g_application_register() has been
successfully called.
%TRUE if @application is registered
a #GApplication
Checks if @application is remote.
If @application is remote then it means that another instance of
application already exists (the 'primary' instance). Calls to
perform actions on @application will result in the actions being
performed by the primary instance.
The value of this property cannot be accessed before
g_application_register() has been called. See
g_application_get_is_registered().
%TRUE if @application is remote
a #GApplication
Increases the use count of @application.
Use this function to indicate that the application has a reason to
continue to run. For example, g_application_hold() is called by GTK+
when a toplevel window is on the screen.
To cancel the hold, call g_application_release().
a #GApplication
Increases the busy count of @application.
Use this function to indicate that the application is busy, for instance
while a long running operation is pending.
The busy state will be exposed to other processes, so a session shell will
use that information to indicate the state to the user (e.g. with a
spinner).
To cancel the busy indication, use g_application_unmark_busy().
a #GApplication
Opens the given files.
In essence, this results in the #GApplication::open signal being emitted
in the primary instance.
@n_files must be greater than zero.
@hint is simply passed through to the ::open signal. It is
intended to be used by applications that have multiple modes for
opening files (eg: "view" vs "edit", etc). Unless you have a need
for this functionality, you should use "".
The application must be registered before calling this function
and it must have the %G_APPLICATION_HANDLES_OPEN flag set.
a #GApplication
an array of #GFiles to open
the length of the @files array
a hint (or ""), but never %NULL
Immediately quits the application.
Upon return to the mainloop, g_application_run() will return,
calling only the 'shutdown' function before doing so.
The hold count is ignored.
The result of calling g_application_run() again after it returns is
unspecified.
a #GApplication
Attempts registration of the application.
This is the point at which the application discovers if it is the
primary instance or merely acting as a remote for an already-existing
primary instance. This is implemented by attempting to acquire the
application identifier as a unique bus name on the session bus using
GDBus.
If there is no application ID or if %G_APPLICATION_NON_UNIQUE was
given, then this process will always become the primary instance.
Due to the internal architecture of GDBus, method calls can be
dispatched at any time (even if a main loop is not running). For
this reason, you must ensure that any object paths that you wish to
register are registered before calling this function.
If the application has already been registered then %TRUE is
returned with no work performed.
The #GApplication::startup signal is emitted if registration succeeds
and @application is the primary instance (including the non-unique
case).
In the event of an error (such as @cancellable being cancelled, or a
failure to connect to the session bus), %FALSE is returned and @error
is set appropriately.
Note: the return value of this function is not an indicator that this
instance is or is not the primary instance of the application. See
g_application_get_is_remote() for that.
%TRUE if registration succeeded
a #GApplication
a #GCancellable, or %NULL
Decrease the use count of @application.
When the use count reaches zero, the application will stop running.
Never call this function except to cancel the effect of a previous
call to g_application_hold().
a #GApplication
Runs the application.
This function is intended to be run from main() and its return value
is intended to be returned by main(). Although you are expected to pass
the @argc, @argv parameters from main() to this function, it is possible
to pass %NULL if @argv is not available or commandline handling is not
required.
First, the local_command_line() virtual function is invoked.
This function always runs on the local instance. It gets passed a pointer
to a %NULL-terminated copy of @argv and is expected to remove the arguments
that it handled (shifting up remaining arguments). See
<xref linkend="gapplication-example-cmdline2"/> for an example of
parsing @argv manually. Alternatively, you may use the #GOptionContext API,
after setting <literal>argc = g_strv_length (argv);</literal>.
The last argument to local_command_line() is a pointer to the @status
variable which can used to set the exit status that is returned from
g_application_run().
If local_command_line() returns %TRUE, the command line is expected
to be completely handled, including possibly registering as the primary
instance, calling g_application_activate() or g_application_open(), etc.
If local_command_line() returns %FALSE then the application is registered
and the #GApplication::command-line signal is emitted in the primary
instance (which may or may not be this instance). The signal handler
gets passed a #GApplicationCommandLine object that (among other things)
contains the remaining commandline arguments that have not been handled
by local_command_line().
If the application has the %G_APPLICATION_HANDLES_COMMAND_LINE
flag set then the default implementation of local_command_line()
always returns %FALSE immediately, resulting in the commandline
always being handled in the primary instance.
Otherwise, the default implementation of local_command_line() tries
to do a couple of things that are probably reasonable for most
applications. First, g_application_register() is called to attempt
to register the application. If that works, then the command line
arguments are inspected. If no commandline arguments are given, then
g_application_activate() is called. If commandline arguments are
given and the %G_APPLICATION_HANDLES_OPEN flag is set then they
are assumed to be filenames and g_application_open() is called.
If you need to handle commandline arguments that are not filenames,
and you don't mind commandline handling to happen in the primary
instance, you should set %G_APPLICATION_HANDLES_COMMAND_LINE and
process the commandline arguments in your #GApplication::command-line
signal handler, either manually or using the #GOptionContext API.
If you are interested in doing more complicated local handling of the
commandline then you should implement your own #GApplication subclass
and override local_command_line(). In this case, you most likely want
to return %TRUE from your local_command_line() implementation to
suppress the default handling. See
<xref linkend="gapplication-example-cmdline2"/> for an example.
If, after the above is done, the use count of the application is zero
then the exit status is returned immediately. If the use count is
non-zero then the default main context is iterated until the use count
falls to zero, at which point 0 is returned.
If the %G_APPLICATION_IS_SERVICE flag is set, then the service will
run for as much as 10 seconds with a use count of zero while waiting
for the message that caused the activation to arrive. After that,
if the use count falls to zero the application will exit immediately,
except in the case that g_application_set_inactivity_timeout() is in
use.
This function sets the prgname (g_set_prgname()), if not already set,
to the basename of argv[0]. Since 2.38, if %G_APPLICATION_IS_SERVICE
is specified, the prgname is set to the application ID. The main
impact of this is is that the wmclass of windows created by Gtk+ will
be set accordingly, which helps the window manager determine which
application is showing the window.
the exit status
a #GApplication
the argc from main() (or 0 if @argv is %NULL)
the argv from main(), or %NULL
This used to be how actions were associated with a #GApplication.
Now there is #GActionMap for that.
a #GApplication
a #GActionGroup, or %NULL
Sets the unique identifier for @application.
The application id can only be modified if @application has not yet
been registered.
If non-%NULL, the application id must be valid. See
g_application_id_is_valid().
a #GApplication
the identifier for @application
Sets or unsets the default application for the process, as returned
by g_application_get_default().
This function does not take its own reference on @application. If
@application is destroyed then the default application will revert
back to %NULL.
the application to set as default, or %NULL
Sets the flags for @application.
The flags can only be modified if @application has not yet been
registered.
See #GApplicationFlags.
a #GApplication
the flags for @application
Sets the current inactivity timeout for the application.
This is the amount of time (in milliseconds) after the last call to
g_application_release() before the application stops running.
This call has no side effects of its own. The value set here is only
used for next time g_application_release() drops the use count to
zero. Any timeouts currently in progress are not impacted.
a #GApplication
the timeout, in milliseconds
Decreases the busy count of @application.
When the busy count reaches zero, the new state will be propagated
to other processes.
This function must only be called to cancel the effect of a previous
call to g_application_mark_busy().
a #GApplication
The ::activate signal is emitted on the primary instance when an
activation occurs. See g_application_activate().
The ::command-line signal is emitted on the primary instance when
a commandline is not handled locally. See g_application_run() and
the #GApplicationCommandLine documentation for more information.
An integer that is set as the exit status for the calling process. See g_application_command_line_set_exit_status().
a #GApplicationCommandLine representing the passed commandline
The ::open signal is emitted on the primary instance when there are
files to open. See g_application_open() for more information.
an array of #GFiles
the length of @files
a hint provided by the calling instance
The ::shutdown signal is emitted only on the registered primary instance
immediately after the main loop terminates.
The ::startup signal is emitted on the primary instance immediately
after registration. See g_application_register().
Virtual function table for #GApplication.
an array of #GFiles to open
the length of the @files array
a hint (or ""), but never %NULL
%TRUE if the commandline has been completely handled
array of command line arguments
exit status to fill after processing the command line.
#GApplicationCommandLine represents a command-line invocation of
an application. It is created by #GApplication and emitted
in the #GApplication::command-line signal and virtual function.
The class contains the list of arguments that the program was invoked
with. It is also possible to query if the commandline invocation was
local (ie: the current process is running in direct response to the
invocation) or remote (ie: some other process forwarded the
commandline to this process).
The GApplicationCommandLine object can provide the @argc and @argv
parameters for use with the #GOptionContext command-line parsing API,
with the g_application_command_line_get_arguments() function. See
<xref linkend="gapplication-example-cmdline3"/> for an example.
The exit status of the originally-invoked process may be set and
messages can be printed to stdout or stderr of that process. The
lifecycle of the originally-invoked process is tied to the lifecycle
of this object (ie: the process exits when the last reference is
dropped).
The main use for #GApplicationCommandLine (and the
#GApplication::command-line signal) is 'Emacs server' like use cases:
You can set the <envar>EDITOR</envar> environment variable to have
e.g. git use your favourite editor to edit commit messages, and if you
already have an instance of the editor running, the editing will happen
in the running instance, instead of opening a new one. An important
aspect of this use case is that the process that gets started by git
does not return until the editing is done.
<example id="gapplication-example-cmdline"><title>Handling commandline arguments with GApplication</title>
<para>
A simple example where the commandline is completely handled
in the #GApplication::command-line handler. The launching instance exits
once the signal handler in the primary instance has returned, and the
return value of the signal handler becomes the exit status of the launching
instance.
</para>
<programlisting>
<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" parse="text" href="../../../../gio/tests/gapplication-example-cmdline.c">
<xi:fallback>FIXME: MISSING XINCLUDE CONTENT</xi:fallback>
</xi:include>
</programlisting>
</example>
<example id="gapplication-example-cmdline2"><title>Split commandline handling</title>
<para>
An example of split commandline handling. Options that start with
<literal>--local-</literal> are handled locally, all other options are
passed to the #GApplication::command-line handler which runs in the primary
instance.
</para>
<programlisting>
<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" parse="text" href="../../../../gio/tests/gapplication-example-cmdline2.c">
<xi:fallback>FIXME: MISSING XINCLUDE CONTENT</xi:fallback>
</xi:include>
</programlisting>
</example>
<example id="gapplication-example-cmdline3"><title>Deferred commandline handling</title>
<para>
An example of deferred commandline handling. Here, the commandline is
not completely handled before the #GApplication::command-line handler
returns. Instead, we keep a reference to the GApplicationCommandLine
object and handle it later(in this example, in an idle). Note that it
is necessary to hold the application until you are done with the
commandline.
</para>
<para>
This example also shows how to use #GOptionContext for parsing the
commandline arguments. Note that it is necessary to disable the
built-in help-handling of #GOptionContext, since it calls exit()
after printing help, which is not what you want to happen in
the primary instance.
</para>
<programlisting>
<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" parse="text" href="../../../../gio/tests/gapplication-example-cmdline3.c">
<xi:fallback>FIXME: MISSING XINCLUDE CONTENT</xi:fallback>
</xi:include>
</programlisting>
</example>
Gets the stdin of the invoking process.
The #GInputStream can be used to read data passed to the standard
input of the invoking process.
This doesn't work on all platforms. Presently, it is only available
on UNIX when using a DBus daemon capable of passing file descriptors.
If stdin is not available then %NULL will be returned. In the
future, support may be expanded to other platforms.
You must only call this function once per commandline invocation.
a #GInputStream for stdin
Creates a #GFile corresponding to a filename that was given as part
of the invocation of @cmdline.
This differs from g_file_new_for_commandline_arg() in that it
resolves relative pathnames using the current working directory of
the invoking process rather than the local process.
a new #GFile
a #GApplicationCommandLine
an argument from @cmdline
Gets the list of arguments that was passed on the command line.
The strings in the array may contain non-utf8 data.
The return value is %NULL-terminated and should be freed using
g_strfreev().
the string array containing the arguments (the argv)
a #GApplicationCommandLine
the length of the arguments array, or %NULL
Gets the working directory of the command line invocation.
The string may contain non-utf8 data.
It is possible that the remote application did not send a working
directory, so this may be %NULL.
The return value should not be modified or freed and is valid for as
long as @cmdline exists.
the current directory, or %NULL
a #GApplicationCommandLine
Gets the contents of the 'environ' variable of the command line
invocation, as would be returned by g_get_environ(), ie as a
%NULL-terminated list of strings in the form 'NAME=VALUE'.
The strings may contain non-utf8 data.
The remote application usually does not send an environment. Use
%G_APPLICATION_SEND_ENVIRONMENT to affect that. Even with this flag
set it is possible that the environment is still not available (due
to invocation messages from other applications).
The return value should not be modified or freed and is valid for as
long as @cmdline exists.
See g_application_command_line_getenv() if you are only interested
in the value of a single environment variable.
the environment strings, or %NULL if they were not sent
a #GApplicationCommandLine
Gets the exit status of @cmdline. See
g_application_command_line_set_exit_status() for more information.
the exit status
a #GApplicationCommandLine
Determines if @cmdline represents a remote invocation.
%TRUE if the invocation was remote
a #GApplicationCommandLine
Gets the platform data associated with the invocation of @cmdline.
This is a #GVariant dictionary containing information about the
context in which the invocation occurred. It typically contains
information like the current working directory and the startup
notification ID.
For local invocation, it will be %NULL.
the platform data, or %NULL
#GApplicationCommandLine
Gets the stdin of the invoking process.
The #GInputStream can be used to read data passed to the standard
input of the invoking process.
This doesn't work on all platforms. Presently, it is only available
on UNIX when using a DBus daemon capable of passing file descriptors.
If stdin is not available then %NULL will be returned. In the
future, support may be expanded to other platforms.
You must only call this function once per commandline invocation.
a #GInputStream for stdin
a #GApplicationCommandLine
Gets the value of a particular environment variable of the command
line invocation, as would be returned by g_getenv(). The strings may
contain non-utf8 data.
The remote application usually does not send an environment. Use
%G_APPLICATION_SEND_ENVIRONMENT to affect that. Even with this flag
set it is possible that the environment is still not available (due
to invocation messages from other applications).
The return value should not be modified or freed and is valid for as
long as @cmdline exists.
the value of the variable, or %NULL if unset or unsent
a #GApplicationCommandLine
the environment variable to get
Formats a message and prints it using the stdout print handler in the
invoking process.
If @cmdline is a local invocation then this is exactly equivalent to
g_print(). If @cmdline is remote then this is equivalent to calling
g_print() in the invoking process.
a #GApplicationCommandLine
a printf-style format string
Formats a message and prints it using the stderr print handler in the
invoking process.
If @cmdline is a local invocation then this is exactly equivalent to
g_printerr(). If @cmdline is remote then this is equivalent to
calling g_printerr() in the invoking process.
a #GApplicationCommandLine
a printf-style format string
Sets the exit status that will be used when the invoking process
exits.
The return value of the #GApplication::command-line signal is
passed to this function when the handler returns. This is the usual
way of setting the exit status.
In the event that you want the remote invocation to continue running
and want to decide on the exit status in the future, you can use this
call. For the case of a remote invocation, the remote process will
typically exit when the last reference is dropped on @cmdline. The
exit status of the remote process will be equal to the last value
that was set with this function.
In the case that the commandline invocation is local, the situation
is slightly more complicated. If the commandline invocation results
in the mainloop running (ie: because the use-count of the application
increased to a non-zero value) then the application is considered to
have been 'successful' in a certain sense, and the exit status is
always zero. If the application use count is zero, though, the exit
status of the local #GApplicationCommandLine is used.
a #GApplicationCommandLine
the exit status
The <structname>GApplicationCommandLineClass</structname> structure
contains private data only
a #GInputStream for stdin
Flags used to define the behaviour of a #GApplication.
Default
Run as a service. In this mode, registration fails if the service is already running, and the application will initially wait up to 10 seconds for an initial activation message to arrive.
Don't try to become the primary instance.
This application handles opening files (in the primary instance). Note that this flag only affects the default implementation of local_command_line(), and has no effect if %G_APPLICATION_HANDLES_COMMAND_LINE is given. See g_application_run() for details.
This application handles command line arguments (in the primary instance). Note that this flag only affect the default implementation of local_command_line(). See g_application_run() for details.
Send the environment of the launching process to the primary instance. Set this flag if your application is expected to behave differently depending on certain environment variables. For instance, an editor might be expected to use the <envar>GIT_COMMITTER_NAME</envar> environment variable when editing a git commit message. The environment is available to the #GApplication::command-line signal handler, via g_application_command_line_getenv().
Make no attempts to do any of the typical single-instance application negotiation, even if the application ID is given. The application neither attempts to become the owner of the application ID nor does it check if an existing owner already exists. Everything occurs in the local process. Since: 2.30.
#GAskPasswordFlags are used to request specific information from the
user, or to notify the user of their choices in an authentication
situation.
operation requires a password.
operation requires a username.
operation requires a domain.
operation supports saving settings.
operation supports anonymous users.
This is the asynchronous version of #GInitable; it behaves the same
in all ways except that initialization is asynchronous. For more details
see the descriptions on #GInitable.
A class may implement both the #GInitable and #GAsyncInitable interfaces.
Users of objects implementing this are not intended to use the interface
method directly; instead it will be used automatically in various ways.
For C applications you generally just call g_async_initable_new_async()
directly, or indirectly via a foo_thing_new_async() wrapper. This will call
g_async_initable_init_async() under the cover, calling back with %NULL and
a set %GError on failure.
A typical implementation might look something like this:
|[
enum {
NOT_INITIALIZED,
INITIALIZING,
INITIALIZED
};
static void
_foo_ready_cb (Foo *self)
{
GList *l;
self->priv->state = INITIALIZED;
for (l = self->priv->init_results; l != NULL; l = l->next)
{
GTask *task = l->data;
if (self->priv->success)
g_task_return_boolean (task, TRUE);
else
g_task_return_new_error (task, ...);
g_object_unref (task);
}
g_list_free (self->priv->init_results);
self->priv->init_results = NULL;
}
static void
foo_init_async (GAsyncInitable *initable,
int io_priority,
GCancellable *cancellable,
GAsyncReadyCallback callback,
gpointer user_data)
{
Foo *self = FOO (initable);
GTask *task;
task = g_task_new (initable, cancellable, callback, user_data);
switch (self->priv->state)
{
case NOT_INITIALIZED:
_foo_get_ready (self);
self->priv->init_results = g_list_append (self->priv->init_results,
task);
self->priv->state = INITIALIZING;
break;
case INITIALIZING:
self->priv->init_results = g_list_append (self->priv->init_results,
task);
break;
case INITIALIZED:
if (!self->priv->success)
g_task_return_new_error (task, ...);
else
g_task_return_boolean (task, TRUE);
g_object_unref (task);
break;
}
}
static gboolean
foo_init_finish (GAsyncInitable *initable,
GAsyncResult *result,
GError **error)
{
g_return_val_if_fail (g_task_is_valid (result, initable), FALSE);
return g_task_propagate_boolean (G_TASK (result), error);
}
static void
foo_async_initable_iface_init (gpointer g_iface,
gpointer data)
{
GAsyncInitableIface *iface = g_iface;
iface->init_async = foo_init_async;
iface->init_finish = foo_init_finish;
}
]|
Helper function for constructing #GAsyncInitable object. This is
similar to g_object_new() but also initializes the object asynchronously.
When the initialization is finished, @callback will be called. You can
then call g_async_initable_new_finish() to get the new object and check
for any errors.
a #GType supporting #GAsyncInitable.
the <link linkend="io-priority">I/O priority</link> of the operation.
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback to call when the initialization is finished
the data to pass to callback function
the name of the first property, or %NULL if no properties
Helper function for constructing #GAsyncInitable object. This is
similar to g_object_new_valist() but also initializes the object
asynchronously.
When the initialization is finished, @callback will be called. You can
then call g_async_initable_new_finish() to get the new object and check
for any errors.
a #GType supporting #GAsyncInitable.
the name of the first property, followed by the value, and other property value pairs, and ended by %NULL.
The var args list generated from @first_property_name.
the <link linkend="io-priority">I/O priority</link> of the operation.
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback to call when the initialization is finished
the data to pass to callback function
Helper function for constructing #GAsyncInitable object. This is
similar to g_object_newv() but also initializes the object asynchronously.
When the initialization is finished, @callback will be called. You can
then call g_async_initable_new_finish() to get the new object and check
for any errors.
a #GType supporting #GAsyncInitable.
the number of parameters in @parameters
the parameters to use to construct the object
the <link linkend="io-priority">I/O priority</link> of the operation.
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback to call when the initialization is finished
the data to pass to callback function
Starts asynchronous initialization of the object implementing the
interface. This must be done before any real use of the object after
initial construction. If the object also implements #GInitable you can
optionally call g_initable_init() instead.
When the initialization is finished, @callback will be called. You can
then call g_async_initable_init_finish() to get the result of the
initialization.
Implementations may also support cancellation. If @cancellable is not
%NULL, then initialization can be cancelled by triggering the cancellable
object from another thread. If the operation was cancelled, the error
%G_IO_ERROR_CANCELLED will be returned. If @cancellable is not %NULL, and
the object doesn't support cancellable initialization, the error
%G_IO_ERROR_NOT_SUPPORTED will be returned.
As with #GInitable, if the object is not initialized, or initialization
returns with an error, then all operations on the object except
g_object_ref() and g_object_unref() are considered to be invalid, and
have undefined behaviour. They will often fail with g_critical() or
g_warning(), but this must not be relied on.
Implementations of this method must be idempotent: i.e. multiple calls
to this function with the same argument should return the same results.
Only the first call initializes the object; further calls return the result
of the first call. This is so that it's safe to implement the singleton
pattern in the GObject constructor function.
For classes that also support the #GInitable interface, the default
implementation of this method will run the g_initable_init() function
in a thread, so if you want to support asynchronous initialization via
threads, just implement the #GAsyncInitable interface without overriding
any interface methods.
the <link linkend="io-priority">I/O priority</link> of the operation.
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
Finishes asynchronous initialization and returns the result.
See g_async_initable_init_async().
%TRUE if successful. If an error has occurred, this function will return %FALSE and set @error appropriately if present.
a #GAsyncResult.
Starts asynchronous initialization of the object implementing the
interface. This must be done before any real use of the object after
initial construction. If the object also implements #GInitable you can
optionally call g_initable_init() instead.
When the initialization is finished, @callback will be called. You can
then call g_async_initable_init_finish() to get the result of the
initialization.
Implementations may also support cancellation. If @cancellable is not
%NULL, then initialization can be cancelled by triggering the cancellable
object from another thread. If the operation was cancelled, the error
%G_IO_ERROR_CANCELLED will be returned. If @cancellable is not %NULL, and
the object doesn't support cancellable initialization, the error
%G_IO_ERROR_NOT_SUPPORTED will be returned.
As with #GInitable, if the object is not initialized, or initialization
returns with an error, then all operations on the object except
g_object_ref() and g_object_unref() are considered to be invalid, and
have undefined behaviour. They will often fail with g_critical() or
g_warning(), but this must not be relied on.
Implementations of this method must be idempotent: i.e. multiple calls
to this function with the same argument should return the same results.
Only the first call initializes the object; further calls return the result
of the first call. This is so that it's safe to implement the singleton
pattern in the GObject constructor function.
For classes that also support the #GInitable interface, the default
implementation of this method will run the g_initable_init() function
in a thread, so if you want to support asynchronous initialization via
threads, just implement the #GAsyncInitable interface without overriding
any interface methods.
a #GAsyncInitable.
the <link linkend="io-priority">I/O priority</link> of the operation.
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
Finishes asynchronous initialization and returns the result.
See g_async_initable_init_async().
%TRUE if successful. If an error has occurred, this function will return %FALSE and set @error appropriately if present.
a #GAsyncInitable.
a #GAsyncResult.
Finishes the async construction for the various g_async_initable_new
calls, returning the created object or %NULL on error.
a newly created #GObject, or %NULL on error. Free with g_object_unref().
the #GAsyncInitable from the callback
the #GAsyncResult from the callback
Provides an interface for asynchronous initializing object such that
initialization may fail.
the <link linkend="io-priority">I/O priority</link> of the operation.
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
%TRUE if successful. If an error has occurred, this function will return %FALSE and set @error appropriately if present.
a #GAsyncResult.
Type definition for a function that will be called back when an asynchronous
operation within GIO has been completed.
the object the asynchronous operation was started with.
a #GAsyncResult.
user data passed to the callback.
Provides a base class for implementing asynchronous function results.
Asynchronous operations are broken up into two separate operations
which are chained together by a #GAsyncReadyCallback. To begin
an asynchronous operation, provide a #GAsyncReadyCallback to the
asynchronous function. This callback will be triggered when the
operation has completed, and will be passed a #GAsyncResult instance
filled with the details of the operation's success or failure, the
object the asynchronous function was started for and any error codes
returned. The asynchronous callback function is then expected to call
the corresponding "_finish()" function, passing the object the
function was called for, the #GAsyncResult instance, and (optionally)
an @error to grab any error conditions that may have occurred.
The "_finish()" function for an operation takes the generic result
(of type #GAsyncResult) and returns the specific result that the
operation in question yields (e.g. a #GFileEnumerator for a
"enumerate children" operation). If the result or error status of the
operation is not needed, there is no need to call the "_finish()"
function; GIO will take care of cleaning up the result and error
information after the #GAsyncReadyCallback returns. You can pass
%NULL for the #GAsyncReadyCallback if you don't need to take any
action at all after the operation completes. Applications may also
take a reference to the #GAsyncResult and call "_finish()" later;
however, the "_finish()" function may be called at most once.
Example of a typical asynchronous operation flow:
|[
void _theoretical_frobnitz_async (Theoretical *t,
GCancellable *c,
GAsyncReadyCallback cb,
gpointer u);
gboolean _theoretical_frobnitz_finish (Theoretical *t,
GAsyncResult *res,
GError **e);
static void
frobnitz_result_func (GObject *source_object,
GAsyncResult *res,
gpointer user_data)
{
gboolean success = FALSE;
success = _theoretical_frobnitz_finish (source_object, res, NULL);
if (success)
g_printf ("Hurray!\n");
else
g_printf ("Uh oh!\n");
/<!-- -->* ... *<!-- -->/
}
int main (int argc, void *argv[])
{
/<!-- -->* ... *<!-- -->/
_theoretical_frobnitz_async (theoretical_data,
NULL,
frobnitz_result_func,
NULL);
/<!-- -->* ... *<!-- -->/
}
]|
The callback for an asynchronous operation is called only once, and is
always called, even in the case of a cancelled operation. On cancellation
the result is a %G_IO_ERROR_CANCELLED error.
<para id="io-priority"><indexterm><primary>I/O
priority</primary></indexterm> Many I/O-related asynchronous
operations have a priority parameter, which is used in certain
cases to determine the order in which operations are executed. They
are <emphasis>not</emphasis> used to determine system-wide I/O
scheduling. Priorities are integers, with lower numbers indicating
higher priority. It is recommended to choose priorities between
%G_PRIORITY_LOW and %G_PRIORITY_HIGH, with %G_PRIORITY_DEFAULT as a
default. </para>
Gets the source object from a #GAsyncResult.
a new reference to the source object for the @res, or %NULL if there is none.
Gets the user data from a #GAsyncResult.
the user data for @res.
Checks if @res has the given @source_tag (generally a function
pointer indicating the function @res was created by).
%TRUE if @res has the indicated @source_tag, %FALSE if not.
an application-defined tag
Gets the source object from a #GAsyncResult.
a new reference to the source object for the @res, or %NULL if there is none.
a #GAsyncResult
Gets the user data from a #GAsyncResult.
the user data for @res.
a #GAsyncResult.
Checks if @res has the given @source_tag (generally a function
pointer indicating the function @res was created by).
%TRUE if @res has the indicated @source_tag, %FALSE if not.
a #GAsyncResult
an application-defined tag
If @res is a #GSimpleAsyncResult, this is equivalent to
g_simple_async_result_propagate_error(). Otherwise it returns
%FALSE.
This can be used for legacy error handling in async
<literal>_finish ()</literal> wrapper functions that traditionally
handled #GSimpleAsyncResult error returns themselves rather than
calling into the virtual method. This should not be used in new
code; #GAsyncResult errors that are set by virtual methods should
also be extracted by virtual methods, to enable subclasses to chain
up correctly.
%TRUE if @error is has been filled in with an error from @res, %FALSE if not.
a #GAsyncResult
Interface definition for #GAsyncResult.
the user data for @res.
a new reference to the source object for the @res, or %NULL if there is none.
%TRUE if @res has the indicated @source_tag, %FALSE if not.
an application-defined tag
Buffered input stream implements #GFilterInputStream and provides
for buffered reads.
By default, #GBufferedInputStream's buffer size is set at 4 kilobytes.
To create a buffered input stream, use g_buffered_input_stream_new(),
or g_buffered_input_stream_new_sized() to specify the buffer's size at
construction.
To get the size of a buffer within a buffered input stream, use
g_buffered_input_stream_get_buffer_size(). To change the size of a
buffered input stream's buffer, use
g_buffered_input_stream_set_buffer_size(). Note that the buffer's size
cannot be reduced below the size of the data within the buffer.
Creates a new #GInputStream from the given @base_stream, with
a buffer set to the default size (4 kilobytes).
a #GInputStream for the given @base_stream.
a #GInputStream
Creates a new #GBufferedInputStream from the given @base_stream,
with a buffer set to @size.
a #GInputStream.
a #GInputStream
a #gsize
Tries to read @count bytes from the stream into the buffer.
Will block during this read.
If @count is zero, returns zero and does nothing. A value of @count
larger than %G_MAXSSIZE will cause a %G_IO_ERROR_INVALID_ARGUMENT error.
On success, the number of bytes read into the buffer is returned.
It is not an error if this is not the same as the requested size, as it
can happen e.g. near the end of a file. Zero is returned on end of file
(or if @count is zero), but never otherwise.
If @count is -1 then the attempted read size is equal to the number of
bytes that are required to fill the buffer.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned. If an
operation was partially finished when the operation was cancelled the
partial result will be returned, without an error.
On error -1 is returned and @error is set accordingly.
For the asynchronous, non-blocking, version of this function, see
g_buffered_input_stream_fill_async().
the number of bytes read into @stream's buffer, up to @count, or -1 on error.
the number of bytes that will be read from the stream
optional #GCancellable object, %NULL to ignore
Reads data into @stream's buffer asynchronously, up to @count size.
@io_priority can be used to prioritize reads. For the synchronous
version of this function, see g_buffered_input_stream_fill().
If @count is -1 then the attempted read size is equal to the number
of bytes that are required to fill the buffer.
the number of bytes that will be read from the stream
the <link linkend="io-priority">I/O priority</link> of the request
optional #GCancellable object
a #GAsyncReadyCallback
a #gpointer
Finishes an asynchronous read.
a #gssize of the read stream, or %-1 on an error.
a #GAsyncResult
Tries to read @count bytes from the stream into the buffer.
Will block during this read.
If @count is zero, returns zero and does nothing. A value of @count
larger than %G_MAXSSIZE will cause a %G_IO_ERROR_INVALID_ARGUMENT error.
On success, the number of bytes read into the buffer is returned.
It is not an error if this is not the same as the requested size, as it
can happen e.g. near the end of a file. Zero is returned on end of file
(or if @count is zero), but never otherwise.
If @count is -1 then the attempted read size is equal to the number of
bytes that are required to fill the buffer.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned. If an
operation was partially finished when the operation was cancelled the
partial result will be returned, without an error.
On error -1 is returned and @error is set accordingly.
For the asynchronous, non-blocking, version of this function, see
g_buffered_input_stream_fill_async().
the number of bytes read into @stream's buffer, up to @count, or -1 on error.
a #GBufferedInputStream
the number of bytes that will be read from the stream
optional #GCancellable object, %NULL to ignore
Reads data into @stream's buffer asynchronously, up to @count size.
@io_priority can be used to prioritize reads. For the synchronous
version of this function, see g_buffered_input_stream_fill().
If @count is -1 then the attempted read size is equal to the number
of bytes that are required to fill the buffer.
a #GBufferedInputStream
the number of bytes that will be read from the stream
the <link linkend="io-priority">I/O priority</link> of the request
optional #GCancellable object
a #GAsyncReadyCallback
a #gpointer
Finishes an asynchronous read.
a #gssize of the read stream, or %-1 on an error.
a #GBufferedInputStream
a #GAsyncResult
Gets the size of the available data within the stream.
size of the available stream.
#GBufferedInputStream
Gets the size of the input buffer.
the current buffer size.
a #GBufferedInputStream
Peeks in the buffer, copying data of size @count into @buffer,
offset @offset bytes.
a #gsize of the number of bytes peeked, or -1 on error.
a #GBufferedInputStream
a pointer to an allocated chunk of memory
a #gsize
a #gsize
Returns the buffer with the currently available bytes. The returned
buffer must not be modified and will become invalid when reading from
the stream or filling the buffer.
read-only buffer
a #GBufferedInputStream
a #gsize to get the number of bytes available in the buffer
Tries to read a single byte from the stream or the buffer. Will block
during this read.
On success, the byte read from the stream is returned. On end of stream
-1 is returned but it's not an exceptional error and @error is not set.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned. If an
operation was partially finished when the operation was cancelled the
partial result will be returned, without an error.
On error -1 is returned and @error is set accordingly.
the byte read from the @stream, or -1 on end of stream or error.
a #GBufferedInputStream
optional #GCancellable object, %NULL to ignore
Sets the size of the internal buffer of @stream to @size, or to the
size of the contents of the buffer. The buffer can never be resized
smaller than its current contents.
a #GBufferedInputStream
a #gsize
the number of bytes read into @stream's buffer, up to @count, or -1 on error.
the number of bytes that will be read from the stream
optional #GCancellable object, %NULL to ignore
the number of bytes that will be read from the stream
the <link linkend="io-priority">I/O priority</link> of the request
optional #GCancellable object
a #GAsyncReadyCallback
a #gpointer
a #gssize of the read stream, or %-1 on an error.
a #GAsyncResult
Buffered output stream implements #GFilterOutputStream and provides
for buffered writes.
By default, #GBufferedOutputStream's buffer size is set at 4 kilobytes.
To create a buffered output stream, use g_buffered_output_stream_new(),
or g_buffered_output_stream_new_sized() to specify the buffer's size
at construction.
To get the size of a buffer within a buffered input stream, use
g_buffered_output_stream_get_buffer_size(). To change the size of a
buffered output stream's buffer, use
g_buffered_output_stream_set_buffer_size(). Note that the buffer's
size cannot be reduced below the size of the data within the buffer.
Creates a new buffered output stream for a base stream.
a #GOutputStream for the given @base_stream.
a #GOutputStream.
Creates a new buffered output stream with a given buffer size.
a #GOutputStream with an internal buffer set to @size.
a #GOutputStream.
a #gsize.
Checks if the buffer automatically grows as data is added.
%TRUE if the @stream's buffer automatically grows, %FALSE otherwise.
a #GBufferedOutputStream.
Gets the size of the buffer in the @stream.
the current size of the buffer.
a #GBufferedOutputStream.
Sets whether or not the @stream's buffer should automatically grow.
If @auto_grow is true, then each write will just make the buffer
larger, and you must manually flush the buffer to actually write out
the data to the underlying stream.
a #GBufferedOutputStream.
a #gboolean.
Sets the size of the internal buffer to @size.
a #GBufferedOutputStream.
a #gsize.
Invoked when a connection to a message bus has been obtained.
The #GDBusConnection to a message bus.
The name that is requested to be owned.
User data passed to g_bus_own_name().
Invoked when the name is acquired.
The #GDBusConnection on which to acquired the name.
The name being owned.
User data passed to g_bus_own_name() or g_bus_own_name_on_connection().
Invoked when the name being watched is known to have to have a owner.
The #GDBusConnection the name is being watched on.
The name being watched.
Unique name of the owner of the name being watched.
User data passed to g_bus_watch_name().
Invoked when the name is lost or @connection has been closed.
The #GDBusConnection on which to acquire the name or %NULL if the connection was disconnected.
The name being owned.
User data passed to g_bus_own_name() or g_bus_own_name_on_connection().
Flags used in g_bus_own_name().
No flags set.
Allow another message bus connection to claim the name.
If another message bus connection owns the name and have specified #G_BUS_NAME_OWNER_FLAGS_ALLOW_REPLACEMENT, then take the name from the other connection.
Invoked when the name being watched is known not to have to have a owner.
This is also invoked when the #GDBusConection on which the watch was
established has been closed. In that case, @connection will be
%NULL.
The #GDBusConnection the name is being watched on, or %NULL.
The name being watched.
User data passed to g_bus_watch_name().
Flags used in g_bus_watch_name().
No flags set.
If no-one owns the name when beginning to watch the name, ask the bus to launch an owner for the name.
An enumeration for well-known message buses.
An alias for the message bus that activated the process, if any.
Not a message bus.
The system-wide message bus.
The login session message bus.
#GBytesIcon specifies an image held in memory in a common format (usually
png) to be used as icon.
Creates a new icon for a bytes.
a #GIcon for the given @bytes, or %NULL on error.
a #GBytes.
Gets the #GBytes associated with the given @icon.
a #GBytes, or %NULL.
a #GIcon.
The bytes containing the icon.
GCancellable is a thread-safe operation cancellation stack used
throughout GIO to allow for cancellation of synchronous and
asynchronous operations.
Creates a new #GCancellable object.
Applications that want to start one or more operations
that should be cancellable should create a #GCancellable
and pass it to the operations.
One #GCancellable can be used in multiple consecutive
operations or in multiple concurrent operations.
a #GCancellable.
Gets the top cancellable from the stack.
a #GCancellable from the top of the stack, or %NULL if the stack is empty.
Will set @cancellable to cancelled, and will emit the
#GCancellable::cancelled signal. (However, see the warning about
race conditions in the documentation for that signal if you are
planning to connect to it.)
This function is thread-safe. In other words, you can safely call
it from a thread other than the one running the operation that was
passed the @cancellable.
The convention within gio is that cancelling an asynchronous
operation causes it to complete asynchronously. That is, if you
cancel the operation from the same thread in which it is running,
then the operation's #GAsyncReadyCallback will not be invoked until
the application returns to the main loop.
a #GCancellable object.
Convenience function to connect to the #GCancellable::cancelled
signal. Also handles the race condition that may happen
if the cancellable is cancelled right before connecting.
@callback is called at most once, either directly at the
time of the connect if @cancellable is already cancelled,
or when @cancellable is cancelled in some thread.
@data_destroy_func will be called when the handler is
disconnected, or immediately if the cancellable is already
cancelled.
See #GCancellable::cancelled for details on how to use this.
The id of the signal handler or 0 if @cancellable has already been cancelled.
A #GCancellable.
The #GCallback to connect.
Data to pass to @callback.
Free function for @data or %NULL.
Disconnects a handler from a cancellable instance similar to
g_signal_handler_disconnect(). Additionally, in the event that a
signal handler is currently running, this call will block until the
handler has finished. Calling this function from a
#GCancellable::cancelled signal handler will therefore result in a
deadlock.
This avoids a race condition where a thread cancels at the
same time as the cancellable operation is finished and the
signal handler is removed. See #GCancellable::cancelled for
details on how to use this.
If @cancellable is %NULL or @handler_id is %0 this function does
nothing.
A #GCancellable or %NULL.
Handler id of the handler to be disconnected, or %0.
Gets the file descriptor for a cancellable job. This can be used to
implement cancellable operations on Unix systems. The returned fd will
turn readable when @cancellable is cancelled.
You are not supposed to read from the fd yourself, just check for
readable status. Reading to unset the readable status is done
with g_cancellable_reset().
After a successful return from this function, you should use
g_cancellable_release_fd() to free up resources allocated for
the returned file descriptor.
See also g_cancellable_make_pollfd().
A valid file descriptor. %-1 if the file descriptor is not supported, or on errors.
a #GCancellable.
Checks if a cancellable job has been cancelled.
%TRUE if @cancellable is cancelled, FALSE if called with %NULL or if item is not cancelled.
a #GCancellable or %NULL
Creates a #GPollFD corresponding to @cancellable; this can be passed
to g_poll() and used to poll for cancellation. This is useful both
for unix systems without a native poll and for portability to
windows.
When this function returns %TRUE, you should use
g_cancellable_release_fd() to free up resources allocated for the
@pollfd. After a %FALSE return, do not call g_cancellable_release_fd().
If this function returns %FALSE, either no @cancellable was given or
resource limits prevent this function from allocating the necessary
structures for polling. (On Linux, you will likely have reached
the maximum number of file descriptors.) The suggested way to handle
these cases is to ignore the @cancellable.
You are not supposed to read from the fd yourself, just check for
readable status. Reading to unset the readable status is done
with g_cancellable_reset().
%TRUE if @pollfd was successfully initialized, %FALSE on failure to prepare the cancellable.
a #GCancellable or %NULL
a pointer to a #GPollFD
Pops @cancellable off the cancellable stack (verifying that @cancellable
is on the top of the stack).
a #GCancellable object
Pushes @cancellable onto the cancellable stack. The current
cancellable can then be received using g_cancellable_get_current().
This is useful when implementing cancellable operations in
code that does not allow you to pass down the cancellable object.
This is typically called automatically by e.g. #GFile operations,
so you rarely have to call this yourself.
a #GCancellable object
Releases a resources previously allocated by g_cancellable_get_fd()
or g_cancellable_make_pollfd().
For compatibility reasons with older releases, calling this function
is not strictly required, the resources will be automatically freed
when the @cancellable is finalized. However, the @cancellable will
block scarce file descriptors until it is finalized if this function
is not called. This can cause the application to run out of file
descriptors when many #GCancellables are used at the same time.
a #GCancellable
Resets @cancellable to its uncancelled state.
If cancellable is currently in use by any cancellable operation
then the behavior of this function is undefined.
a #GCancellable object.
If the @cancellable is cancelled, sets the error to notify
that the operation was cancelled.
%TRUE if @cancellable was cancelled, %FALSE if it was not
a #GCancellable or %NULL
Creates a source that triggers if @cancellable is cancelled and
calls its callback of type #GCancellableSourceFunc. This is
primarily useful for attaching to another (non-cancellable) source
with g_source_add_child_source() to add cancellability to it.
For convenience, you can call this with a %NULL #GCancellable,
in which case the source will never trigger.
the new #GSource.
a #GCancellable, or %NULL
Emitted when the operation has been cancelled.
Can be used by implementations of cancellable operations. If the
operation is cancelled from another thread, the signal will be
emitted in the thread that cancelled the operation, not the
thread that is running the operation.
Note that disconnecting from this signal (or any signal) in a
multi-threaded program is prone to race conditions. For instance
it is possible that a signal handler may be invoked even
<emphasis>after</emphasis> a call to
g_signal_handler_disconnect() for that handler has already
returned.
There is also a problem when cancellation happen
right before connecting to the signal. If this happens the
signal will unexpectedly not be emitted, and checking before
connecting to the signal leaves a race condition where this is
still happening.
In order to make it safe and easy to connect handlers there
are two helper functions: g_cancellable_connect() and
g_cancellable_disconnect() which protect against problems
like this.
An example of how to us this:
|[
/<!-- -->* Make sure we don't do any unnecessary work if already cancelled *<!-- -->/
if (g_cancellable_set_error_if_cancelled (cancellable))
return;
/<!-- -->* Set up all the data needed to be able to
* handle cancellation of the operation *<!-- -->/
my_data = my_data_new (...);
id = 0;
if (cancellable)
id = g_cancellable_connect (cancellable,
G_CALLBACK (cancelled_handler)
data, NULL);
/<!-- -->* cancellable operation here... *<!-- -->/
g_cancellable_disconnect (cancellable, id);
/<!-- -->* cancelled_handler is never called after this, it
* is now safe to free the data *<!-- -->/
my_data_free (my_data);
]|
Note that the cancelled signal is emitted in the thread that
the user cancelled from, which may be the main thread. So, the
cancellable signal should not do something that can block.
This is the function type of the callback used for the #GSource
returned by g_cancellable_source_new().
it should return %FALSE if the source should be removed.
the #GCancellable
data passed in by the user.
#GCharsetConverter is an implementation of #GConverter based on
GIConv.
Creates a new #GCharsetConverter.
a new #GCharsetConverter or %NULL on error.
destination charset
source charset
Gets the number of fallbacks that @converter has applied so far.
the number of fallbacks that @converter has applied
a #GCharsetConverter
Gets the #GCharsetConverter:use-fallback property.
%TRUE if fallbacks are used by @converter
a #GCharsetConverter
Sets the #GCharsetConverter:use-fallback property.
a #GCharsetConverter
%TRUE to use fallbacks
#GConverter is implemented by objects that convert
binary data in various ways. The conversion can be
stateful and may fail at any place.
Some example conversions are: character set conversion,
compression, decompression and regular expression
replace.
This is the main operation used when converting data. It is to be called
multiple times in a loop, and each time it will do some work, i.e.
producing some output (in @outbuf) or consuming some input (from @inbuf) or
both. If its not possible to do any work an error is returned.
Note that a single call may not consume all input (or any input at all).
Also a call may produce output even if given no input, due to state stored
in the converter producing output.
If any data was either produced or consumed, and then an error happens, then
only the successful conversion is reported and the error is returned on the
next call.
A full conversion loop involves calling this method repeatedly, each time
giving it new input and space output space. When there is no more input
data after the data in @inbuf, the flag %G_CONVERTER_INPUT_AT_END must be set.
The loop will be (unless some error happens) returning %G_CONVERTER_CONVERTED
each time until all data is consumed and all output is produced, then
%G_CONVERTER_FINISHED is returned instead. Note, that %G_CONVERTER_FINISHED
may be returned even if %G_CONVERTER_INPUT_AT_END is not set, for instance
in a decompression converter where the end of data is detectable from the
data (and there might even be other data after the end of the compressed data).
When some data has successfully been converted @bytes_read and is set to
the number of bytes read from @inbuf, and @bytes_written is set to indicate
how many bytes was written to @outbuf. If there are more data to output
or consume (i.e. unless the %G_CONVERTER_INPUT_AT_END is specified) then
%G_CONVERTER_CONVERTED is returned, and if no more data is to be output
then %G_CONVERTER_FINISHED is returned.
On error %G_CONVERTER_ERROR is returned and @error is set accordingly.
Some errors need special handling:
%G_IO_ERROR_NO_SPACE is returned if there is not enough space
to write the resulting converted data, the application should
call the function again with a larger @outbuf to continue.
%G_IO_ERROR_PARTIAL_INPUT is returned if there is not enough
input to fully determine what the conversion should produce,
and the %G_CONVERTER_INPUT_AT_END flag is not set. This happens for
example with an incomplete multibyte sequence when converting text,
or when a regexp matches up to the end of the input (and may match
further input). It may also happen when @inbuf_size is zero and
there is no more data to produce.
When this happens the application should read more input and then
call the function again. If further input shows that there is no
more data call the function again with the same data but with
the %G_CONVERTER_INPUT_AT_END flag set. This may cause the conversion
to finish as e.g. in the regexp match case (or, to fail again with
%G_IO_ERROR_PARTIAL_INPUT in e.g. a charset conversion where the
input is actually partial).
After g_converter_convert() has returned %G_CONVERTER_FINISHED the
converter object is in an invalid state where its not allowed
to call g_converter_convert() anymore. At this time you can only
free the object or call g_converter_reset() to reset it to the
initial state.
If the flag %G_CONVERTER_FLUSH is set then conversion is modified
to try to write out all internal state to the output. The application
has to call the function multiple times with the flag set, and when
the available input has been consumed and all internal state has
been produced then %G_CONVERTER_FLUSHED (or %G_CONVERTER_FINISHED if
really at the end) is returned instead of %G_CONVERTER_CONVERTED.
This is somewhat similar to what happens at the end of the input stream,
but done in the middle of the data.
This has different meanings for different conversions. For instance
in a compression converter it would mean that we flush all the
compression state into output such that if you uncompress the
compressed data you get back all the input data. Doing this may
make the final file larger due to padding though. Another example
is a regexp conversion, where if you at the end of the flushed data
have a match, but there is also a potential longer match. In the
non-flushed case we would ask for more input, but when flushing we
treat this as the end of input and do the match.
Flushing is not always possible (like if a charset converter flushes
at a partial multibyte sequence). Converters are supposed to try
to produce as much output as possible and then return an error
(typically %G_IO_ERROR_PARTIAL_INPUT).
a #GConverterResult, %G_CONVERTER_ERROR on error.
the buffer containing the data to convert.
the number of bytes in @inbuf
a buffer to write converted data in.
the number of bytes in @outbuf, must be at least one
a #GConverterFlags controlling the conversion details
will be set to the number of bytes read from @inbuf on success
will be set to the number of bytes written to @outbuf on success
Resets all internal state in the converter, making it behave
as if it was just created. If the converter has any internal
state that would produce output then that output is lost.
This is the main operation used when converting data. It is to be called
multiple times in a loop, and each time it will do some work, i.e.
producing some output (in @outbuf) or consuming some input (from @inbuf) or
both. If its not possible to do any work an error is returned.
Note that a single call may not consume all input (or any input at all).
Also a call may produce output even if given no input, due to state stored
in the converter producing output.
If any data was either produced or consumed, and then an error happens, then
only the successful conversion is reported and the error is returned on the
next call.
A full conversion loop involves calling this method repeatedly, each time
giving it new input and space output space. When there is no more input
data after the data in @inbuf, the flag %G_CONVERTER_INPUT_AT_END must be set.
The loop will be (unless some error happens) returning %G_CONVERTER_CONVERTED
each time until all data is consumed and all output is produced, then
%G_CONVERTER_FINISHED is returned instead. Note, that %G_CONVERTER_FINISHED
may be returned even if %G_CONVERTER_INPUT_AT_END is not set, for instance
in a decompression converter where the end of data is detectable from the
data (and there might even be other data after the end of the compressed data).
When some data has successfully been converted @bytes_read and is set to
the number of bytes read from @inbuf, and @bytes_written is set to indicate
how many bytes was written to @outbuf. If there are more data to output
or consume (i.e. unless the %G_CONVERTER_INPUT_AT_END is specified) then
%G_CONVERTER_CONVERTED is returned, and if no more data is to be output
then %G_CONVERTER_FINISHED is returned.
On error %G_CONVERTER_ERROR is returned and @error is set accordingly.
Some errors need special handling:
%G_IO_ERROR_NO_SPACE is returned if there is not enough space
to write the resulting converted data, the application should
call the function again with a larger @outbuf to continue.
%G_IO_ERROR_PARTIAL_INPUT is returned if there is not enough
input to fully determine what the conversion should produce,
and the %G_CONVERTER_INPUT_AT_END flag is not set. This happens for
example with an incomplete multibyte sequence when converting text,
or when a regexp matches up to the end of the input (and may match
further input). It may also happen when @inbuf_size is zero and
there is no more data to produce.
When this happens the application should read more input and then
call the function again. If further input shows that there is no
more data call the function again with the same data but with
the %G_CONVERTER_INPUT_AT_END flag set. This may cause the conversion
to finish as e.g. in the regexp match case (or, to fail again with
%G_IO_ERROR_PARTIAL_INPUT in e.g. a charset conversion where the
input is actually partial).
After g_converter_convert() has returned %G_CONVERTER_FINISHED the
converter object is in an invalid state where its not allowed
to call g_converter_convert() anymore. At this time you can only
free the object or call g_converter_reset() to reset it to the
initial state.
If the flag %G_CONVERTER_FLUSH is set then conversion is modified
to try to write out all internal state to the output. The application
has to call the function multiple times with the flag set, and when
the available input has been consumed and all internal state has
been produced then %G_CONVERTER_FLUSHED (or %G_CONVERTER_FINISHED if
really at the end) is returned instead of %G_CONVERTER_CONVERTED.
This is somewhat similar to what happens at the end of the input stream,
but done in the middle of the data.
This has different meanings for different conversions. For instance
in a compression converter it would mean that we flush all the
compression state into output such that if you uncompress the
compressed data you get back all the input data. Doing this may
make the final file larger due to padding though. Another example
is a regexp conversion, where if you at the end of the flushed data
have a match, but there is also a potential longer match. In the
non-flushed case we would ask for more input, but when flushing we
treat this as the end of input and do the match.
Flushing is not always possible (like if a charset converter flushes
at a partial multibyte sequence). Converters are supposed to try
to produce as much output as possible and then return an error
(typically %G_IO_ERROR_PARTIAL_INPUT).
a #GConverterResult, %G_CONVERTER_ERROR on error.
a #GConverter.
the buffer containing the data to convert.
the number of bytes in @inbuf
a buffer to write converted data in.
the number of bytes in @outbuf, must be at least one
a #GConverterFlags controlling the conversion details
will be set to the number of bytes read from @inbuf on success
will be set to the number of bytes written to @outbuf on success
Resets all internal state in the converter, making it behave
as if it was just created. If the converter has any internal
state that would produce output then that output is lost.
a #GConverter.
Flags used when calling a g_converter_convert().
No flags.
At end of input data
Flush data
Provides an interface for converting data from one type
to another type. The conversion can be stateful
and may fail at any place.
a #GConverterResult, %G_CONVERTER_ERROR on error.
the buffer containing the data to convert.
the number of bytes in @inbuf
a buffer to write converted data in.
the number of bytes in @outbuf, must be at least one
a #GConverterFlags controlling the conversion details
will be set to the number of bytes read from @inbuf on success
will be set to the number of bytes written to @outbuf on success
Converter input stream implements #GInputStream and allows
conversion of data of various types during reading.
As of GLib 2.34, #GConverterInputStream implements
#GPollableInputStream.
Creates a new converter input stream for the @base_stream.
a new #GInputStream.
a #GInputStream
a #GConverter
Gets the #GConverter that is used by @converter_stream.
the converter of the converter input stream
a #GConverterInputStream
Converter output stream implements #GOutputStream and allows
conversion of data of various types during reading.
As of GLib 2.34, #GConverterOutputStream implements
#GPollableOutputStream.
Creates a new converter output stream for the @base_stream.
a new #GOutputStream.
a #GOutputStream
a #GConverter
Gets the #GConverter that is used by @converter_stream.
the converter of the converter output stream
a #GConverterOutputStream
Results returned from g_converter_convert().
There was an error during conversion.
Some data was consumed or produced
The conversion is finished
Flushing is finished
The #GCredentials type is a reference-counted wrapper for native
credentials. This information is typically used for identifying,
authenticating and authorizing other processes.
Some operating systems supports looking up the credentials of the
remote peer of a communication endpoint - see e.g.
g_socket_get_credentials().
Some operating systems supports securely sending and receiving
credentials over a Unix Domain Socket, see
#GUnixCredentialsMessage, g_unix_connection_send_credentials() and
g_unix_connection_receive_credentials() for details.
On Linux, the native credential type is a <type>struct ucred</type>
- see the
<citerefentry><refentrytitle>unix</refentrytitle><manvolnum>7</manvolnum></citerefentry>
man page for details. This corresponds to
%G_CREDENTIALS_TYPE_LINUX_UCRED.
On FreeBSD, the native credential type is a <type>struct cmsgcred</type>.
This corresponds to %G_CREDENTIALS_TYPE_FREEBSD_CMSGCRED.
On OpenBSD, the native credential type is a <type>struct sockpeercred</type>.
This corresponds to %G_CREDENTIALS_TYPE_OPENBSD_SOCKPEERCRED.
Creates a new #GCredentials object with credentials matching the
the current process.
A #GCredentials. Free with g_object_unref().
Gets a pointer to native credentials of type @native_type from
@credentials.
It is a programming error (which will cause an warning to be
logged) to use this method if there is no #GCredentials support for
the OS or if @native_type isn't supported by the OS.
The pointer to native credentials or %NULL if the operation there is no #GCredentials support for the OS or if @native_type isn't supported by the OS. Do not free the returned data, it is owned by @credentials.
A #GCredentials.
The type of native credentials to get.
Checks if @credentials and @other_credentials is the same user.
This operation can fail if #GCredentials is not supported on the
the OS.
%TRUE if @credentials and @other_credentials has the same user, %FALSE otherwise or if @error is set.
A #GCredentials.
A #GCredentials.
Copies the native credentials of type @native_type from @native
into @credentials.
It is a programming error (which will cause an warning to be
logged) to use this method if there is no #GCredentials support for
the OS or if @native_type isn't supported by the OS.
A #GCredentials.
The type of native credentials to set.
A pointer to native credentials.
Creates a human-readable textual representation of @credentials
that can be used in logging and debug messages. The format of the
returned string may change in future GLib release.
A string that should be freed with g_free().
A #GCredentials object.
Class structure for #GCredentials.
Enumeration describing different kinds of native credential types.
Indicates an invalid native credential type.
The native credentials type is a <type>struct ucred</type>.
The native credentials type is a <type>struct cmsgcred</type>.
The native credentials type is a <type>struct sockpeercred</type>. Added in 2.30.
#GDBusActionGroup is an implementation of the #GActionGroup
interface that can be used as a proxy for an action group
that is exported over D-Bus with g_dbus_connection_export_action_group().
Obtains a #GDBusActionGroup for the action group which is exported at
the given @bus_name and @object_path.
The thread default main context is taken at the time of this call.
All signals on the menu model (and any linked models) are reported
with respect to this context. All calls on the returned menu model
(and linked models) must also originate from this same context, with
the thread default main context unchanged.
This call is non-blocking. The returned action group may or may not
already be filled in. The correct thing to do is connect the signals
for the action group to monitor for changes and then to call
g_action_group_list_actions() to get the initial list.
a #GDBusActionGroup
A #GDBusConnection
the bus name which exports the action group
the object path at which the action group is exported
Information about an annotation.
If @info is statically allocated does nothing. Otherwise increases
the reference count.
The same @info.
A #GDBusNodeInfo
If @info is statically allocated, does nothing. Otherwise decreases
the reference count of @info. When its reference count drops to 0,
the memory used is freed.
A #GDBusAnnotationInfo.
Looks up the value of an annotation.
The cost of this function is O(n) in number of annotations.
The value or %NULL if not found. Do not free, it is owned by @annotations.
A %NULL-terminated array of annotations or %NULL.
The name of the annotation to look up.
Information about an argument for a method or a signal.
If @info is statically allocated does nothing. Otherwise increases
the reference count.
The same @info.
A #GDBusArgInfo
If @info is statically allocated, does nothing. Otherwise decreases
the reference count of @info. When its reference count drops to 0,
the memory used is freed.
A #GDBusArgInfo.
The #GDBusAuthObserver type provides a mechanism for participating
in how a #GDBusServer (or a #GDBusConnection) authenticates remote
peers. Simply instantiate a #GDBusAuthObserver and connect to the
signals you are interested in. Note that new signals may be added
in the future
For example, if you only want to allow D-Bus connections from
processes owned by the same uid as the server, you would use a
signal handler like the following:
<example id="auth-observer"><title>Controlling Authentication</title><programlisting>
static gboolean
on_authorize_authenticated_peer (GDBusAuthObserver *observer,
GIOStream *stream,
GCredentials *credentials,
gpointer user_data)
{
gboolean authorized;
authorized = FALSE;
if (credentials != NULL)
{
GCredentials *own_credentials;
own_credentials = g_credentials_new ();
if (g_credentials_is_same_user (credentials, own_credentials, NULL))
authorized = TRUE;
g_object_unref (own_credentials);
}
return authorized;
}
</programlisting></example>
Creates a new #GDBusAuthObserver object.
A #GDBusAuthObserver. Free with g_object_unref().
Emits the #GDBusAuthObserver::allow-mechanism signal on @observer.
%TRUE if @mechanism can be used to authenticate the other peer, %FALSE if not.
A #GDBusAuthObserver.
The name of the mechanism, e.g. <literal>DBUS_COOKIE_SHA1</literal>.
Emits the #GDBusAuthObserver::authorize-authenticated-peer signal on @observer.
%TRUE if the peer is authorized, %FALSE if not.
A #GDBusAuthObserver.
A #GIOStream for the #GDBusConnection.
Credentials received from the peer or %NULL.
Emitted to check if @mechanism is allowed to be used.
%TRUE if @mechanism can be used to authenticate the other peer, %FALSE if not.
The name of the mechanism, e.g. <literal>DBUS_COOKIE_SHA1</literal>.
Emitted to check if a peer that is successfully authenticated
is authorized.
%TRUE if the peer is authorized, %FALSE if not.
A #GIOStream for the #GDBusConnection.
Credentials received from the peer or %NULL.
Flags used in g_dbus_connection_call() and similar APIs.
No flags set.
The bus must not launch an owner for the destination name in response to this method invocation.
Capabilities negotiated with the remote peer.
No flags set.
The connection supports exchanging UNIX file descriptors with the remote peer.
The #GDBusConnection type is used for D-Bus connections to remote
peers such as a message buses. It is a low-level API that offers a
lot of flexibility. For instance, it lets you establish a connection
over any transport that can by represented as an #GIOStream.
This class is rarely used directly in D-Bus clients. If you are writing
an D-Bus client, it is often easier to use the g_bus_own_name(),
g_bus_watch_name() or g_dbus_proxy_new_for_bus() APIs.
As an exception to the usual GLib rule that a particular object must not be
used by two threads at the same time, #GDBusConnection's methods may be
called from any thread<footnote>
<para>
This is so that g_bus_get() and g_bus_get_sync() can safely return the
same #GDBusConnection when called from any thread.
</para>
</footnote>.
Most of the ways to obtain a #GDBusConnection automatically initialize it
(i.e. connect to D-Bus): for instance, g_dbus_connection_new() and
g_bus_get(), and the synchronous versions of those methods, give you an
initialized connection. Language bindings for GIO should use
g_initable_new() or g_async_initable_new_async(), which also initialize the
connection.
If you construct an uninitialized #GDBusConnection, such as via
g_object_new(), you must initialize it via g_initable_init() or
g_async_initable_init_async() before using its methods or properties.
Calling methods or accessing properties on a #GDBusConnection that has not
completed initialization successfully is considered to be invalid, and leads
to undefined behaviour. In particular, if initialization fails with a
#GError, the only valid thing you can do with that #GDBusConnection is to
free it with g_object_unref().
<example id="gdbus-server"><title>D-Bus server example</title><programlisting><xi:include xmlns:xi="http://www.w3.org/2001/XInclude" parse="text" href="../../../../gio/tests/gdbus-example-server.c"><xi:fallback>FIXME: MISSING XINCLUDE CONTENT</xi:fallback></xi:include></programlisting></example>
<example id="gdbus-subtree-server"><title>D-Bus subtree example</title><programlisting><xi:include xmlns:xi="http://www.w3.org/2001/XInclude" parse="text" href="../../../../gio/tests/gdbus-example-subtree.c"><xi:fallback>FIXME: MISSING XINCLUDE CONTENT</xi:fallback></xi:include></programlisting></example>
<example id="gdbus-unix-fd-client"><title>D-Bus UNIX File Descriptor example</title><programlisting><xi:include xmlns:xi="http://www.w3.org/2001/XInclude" parse="text" href="../../../../gio/tests/gdbus-example-unix-fd-client.c"><xi:fallback>FIXME: MISSING XINCLUDE CONTENT</xi:fallback></xi:include></programlisting></example>
<example id="gdbus-export"><title>Exporting a GObject</title><programlisting><xi:include xmlns:xi="http://www.w3.org/2001/XInclude" parse="text" href="../../../../gio/tests/gdbus-example-export.c"><xi:fallback>FIXME: MISSING XINCLUDE CONTENT</xi:fallback></xi:include></programlisting></example>
Finishes an operation started with g_dbus_connection_new().
A #GDBusConnection or %NULL if @error is set. Free with g_object_unref().
A #GAsyncResult obtained from the #GAsyncReadyCallback passed to g_dbus_connection_new().
Finishes an operation started with g_dbus_connection_new_for_address().
A #GDBusConnection or %NULL if @error is set. Free with g_object_unref().
A #GAsyncResult obtained from the #GAsyncReadyCallback passed to g_dbus_connection_new().
Synchronously connects and sets up a D-Bus client connection for
exchanging D-Bus messages with an endpoint specified by @address
which must be in the D-Bus address format.
This constructor can only be used to initiate client-side
connections - use g_dbus_connection_new_sync() if you need to act
as the server. In particular, @flags cannot contain the
%G_DBUS_CONNECTION_FLAGS_AUTHENTICATION_SERVER or
%G_DBUS_CONNECTION_FLAGS_AUTHENTICATION_ALLOW_ANONYMOUS flags.
This is a synchronous failable constructor. See
g_dbus_connection_new_for_address() for the asynchronous version.
If @observer is not %NULL it may be used to control the
authentication process.
A #GDBusConnection or %NULL if @error is set. Free with g_object_unref().
A D-Bus address.
Flags describing how to make the connection.
A #GDBusAuthObserver or %NULL.
A #GCancellable or %NULL.
Synchronously sets up a D-Bus connection for exchanging D-Bus messages
with the end represented by @stream.
If @stream is a #GSocketConnection, then the corresponding #GSocket
will be put into non-blocking mode.
The D-Bus connection will interact with @stream from a worker thread.
As a result, the caller should not interact with @stream after this
method has been called, except by calling g_object_unref() on it.
If @observer is not %NULL it may be used to control the
authentication process.
This is a synchronous failable constructor. See
g_dbus_connection_new() for the asynchronous version.
A #GDBusConnection or %NULL if @error is set. Free with g_object_unref().
A #GIOStream.
The GUID to use if a authenticating as a server or %NULL.
Flags describing how to make the connection.
A #GDBusAuthObserver or %NULL.
A #GCancellable or %NULL.
Asynchronously sets up a D-Bus connection for exchanging D-Bus messages
with the end represented by @stream.
If @stream is a #GSocketConnection, then the corresponding #GSocket
will be put into non-blocking mode.
The D-Bus connection will interact with @stream from a worker thread.
As a result, the caller should not interact with @stream after this
method has been called, except by calling g_object_unref() on it.
If @observer is not %NULL it may be used to control the
authentication process.
When the operation is finished, @callback will be invoked. You can
then call g_dbus_connection_new_finish() to get the result of the
operation.
This is a asynchronous failable constructor. See
g_dbus_connection_new_sync() for the synchronous
version.
A #GIOStream.
The GUID to use if a authenticating as a server or %NULL.
Flags describing how to make the connection.
A #GDBusAuthObserver or %NULL.
A #GCancellable or %NULL.
A #GAsyncReadyCallback to call when the request is satisfied.
The data to pass to @callback.
Asynchronously connects and sets up a D-Bus client connection for
exchanging D-Bus messages with an endpoint specified by @address
which must be in the D-Bus address format.
This constructor can only be used to initiate client-side
connections - use g_dbus_connection_new() if you need to act as the
server. In particular, @flags cannot contain the
%G_DBUS_CONNECTION_FLAGS_AUTHENTICATION_SERVER or
%G_DBUS_CONNECTION_FLAGS_AUTHENTICATION_ALLOW_ANONYMOUS flags.
When the operation is finished, @callback will be invoked. You can
then call g_dbus_connection_new_finish() to get the result of the
operation.
If @observer is not %NULL it may be used to control the
authentication process.
This is a asynchronous failable constructor. See
g_dbus_connection_new_for_address_sync() for the synchronous
version.
A D-Bus address.
Flags describing how to make the connection.
A #GDBusAuthObserver or %NULL.
A #GCancellable or %NULL.
A #GAsyncReadyCallback to call when the request is satisfied.
The data to pass to @callback.
Adds a message filter. Filters are handlers that are run on all
incoming and outgoing messages, prior to standard dispatch. Filters
are run in the order that they were added. The same handler can be
added as a filter more than once, in which case it will be run more
than once. Filters added during a filter callback won't be run on
the message being processed. Filter functions are allowed to modify
and even drop messages.
Note that filters are run in a dedicated message handling thread so
they can't block and, generally, can't do anything but signal a
worker thread. Also note that filters are rarely needed - use API
such as g_dbus_connection_send_message_with_reply(),
g_dbus_connection_signal_subscribe() or g_dbus_connection_call() instead.
If a filter consumes an incoming message the message is not
dispatched anywhere else - not even the standard dispatch machinery
(that API such as g_dbus_connection_signal_subscribe() and
g_dbus_connection_send_message_with_reply() relies on) will see the
message. Similary, if a filter consumes an outgoing message, the
message will not be sent to the other peer.
A filter identifier that can be used with g_dbus_connection_remove_filter().
A #GDBusConnection.
A filter function.
User data to pass to @filter_function.
Function to free @user_data with when filter is removed or %NULL.
Asynchronously invokes the @method_name method on the
@interface_name D-Bus interface on the remote object at
@object_path owned by @bus_name.
If @connection is closed then the operation will fail with
%G_IO_ERROR_CLOSED. If @cancellable is canceled, the operation will
fail with %G_IO_ERROR_CANCELLED. If @parameters contains a value
not compatible with the D-Bus protocol, the operation fails with
%G_IO_ERROR_INVALID_ARGUMENT.
If @reply_type is non-%NULL then the reply will be checked for having this type and an
error will be raised if it does not match. Said another way, if you give a @reply_type
then any non-%NULL return value will be of this type.
If the @parameters #GVariant is floating, it is consumed. This allows
convenient 'inline' use of g_variant_new(), e.g.:
|[
g_dbus_connection_call (connection,
"org.freedesktop.StringThings",
"/org/freedesktop/StringThings",
"org.freedesktop.StringThings",
"TwoStrings",
g_variant_new ("(ss)",
"Thing One",
"Thing Two"),
NULL,
G_DBUS_CALL_FLAGS_NONE,
-1,
NULL,
(GAsyncReadyCallback) two_strings_done,
NULL);
]|
This is an asynchronous method. When the operation is finished, @callback will be invoked
in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link>
of the thread you are calling this method from. You can then call
g_dbus_connection_call_finish() to get the result of the operation.
See g_dbus_connection_call_sync() for the synchronous version of this
function.
If @callback is %NULL then the D-Bus method call message will be sent with
the %G_DBUS_MESSAGE_FLAGS_NO_REPLY_EXPECTED flag set.
A #GDBusConnection.
A unique or well-known bus name or %NULL if @connection is not a message bus connection.
Path of remote object.
D-Bus interface to invoke method on.
The name of the method to invoke.
A #GVariant tuple with parameters for the method or %NULL if not passing parameters.
The expected type of the reply, or %NULL.
Flags from the #GDBusCallFlags enumeration.
The timeout in milliseconds, -1 to use the default timeout or %G_MAXINT for no timeout.
A #GCancellable or %NULL.
A #GAsyncReadyCallback to call when the request is satisfied or %NULL if you don't care about the result of the method invocation.
The data to pass to @callback.
Finishes an operation started with g_dbus_connection_call().
%NULL if @error is set. Otherwise a #GVariant tuple with return values. Free with g_variant_unref().
A #GDBusConnection.
A #GAsyncResult obtained from the #GAsyncReadyCallback passed to g_dbus_connection_call().
Synchronously invokes the @method_name method on the
@interface_name D-Bus interface on the remote object at
@object_path owned by @bus_name.
If @connection is closed then the operation will fail with
%G_IO_ERROR_CLOSED. If @cancellable is canceled, the
operation will fail with %G_IO_ERROR_CANCELLED. If @parameters
contains a value not compatible with the D-Bus protocol, the operation
fails with %G_IO_ERROR_INVALID_ARGUMENT.
If @reply_type is non-%NULL then the reply will be checked for having
this type and an error will be raised if it does not match. Said
another way, if you give a @reply_type then any non-%NULL return
value will be of this type.
If the @parameters #GVariant is floating, it is consumed.
This allows convenient 'inline' use of g_variant_new(), e.g.:
|[
g_dbus_connection_call_sync (connection,
"org.freedesktop.StringThings",
"/org/freedesktop/StringThings",
"org.freedesktop.StringThings",
"TwoStrings",
g_variant_new ("(ss)",
"Thing One",
"Thing Two"),
NULL,
G_DBUS_CALL_FLAGS_NONE,
-1,
NULL,
&error);
]|
The calling thread is blocked until a reply is received. See
g_dbus_connection_call() for the asynchronous version of
this method.
%NULL if @error is set. Otherwise a #GVariant tuple with return values. Free with g_variant_unref().
A #GDBusConnection.
A unique or well-known bus name or %NULL if @connection is not a message bus connection.
Path of remote object.
D-Bus interface to invoke method on.
The name of the method to invoke.
A #GVariant tuple with parameters for the method or %NULL if not passing parameters.
The expected type of the reply, or %NULL.
Flags from the #GDBusCallFlags enumeration.
The timeout in milliseconds, -1 to use the default timeout or %G_MAXINT for no timeout.
A #GCancellable or %NULL.
Like g_dbus_connection_call() but also takes a #GUnixFDList object.
This method is only available on UNIX.
A #GDBusConnection.
A unique or well-known bus name or %NULL if @connection is not a message bus connection.
Path of remote object.
D-Bus interface to invoke method on.
The name of the method to invoke.
A #GVariant tuple with parameters for the method or %NULL if not passing parameters.
The expected type of the reply, or %NULL.
Flags from the #GDBusCallFlags enumeration.
The timeout in milliseconds, -1 to use the default timeout or %G_MAXINT for no timeout.
A #GUnixFDList or %NULL.
A #GCancellable or %NULL.
A #GAsyncReadyCallback to call when the request is satisfied or %NULL if you don't * care about the result of the method invocation.
The data to pass to @callback.
Finishes an operation started with g_dbus_connection_call_with_unix_fd_list().
%NULL if @error is set. Otherwise a #GVariant tuple with return values. Free with g_variant_unref().
A #GDBusConnection.
Return location for a #GUnixFDList or %NULL.
A #GAsyncResult obtained from the #GAsyncReadyCallback passed to g_dbus_connection_call_with_unix_fd_list().
Like g_dbus_connection_call_sync() but also takes and returns #GUnixFDList objects.
This method is only available on UNIX.
%NULL if @error is set. Otherwise a #GVariant tuple with return values. Free with g_variant_unref().
A #GDBusConnection.
A unique or well-known bus name or %NULL if @connection is not a message bus connection.
Path of remote object.
D-Bus interface to invoke method on.
The name of the method to invoke.
A #GVariant tuple with parameters for the method or %NULL if not passing parameters.
The expected type of the reply, or %NULL.
Flags from the #GDBusCallFlags enumeration.
The timeout in milliseconds, -1 to use the default timeout or %G_MAXINT for no timeout.
A #GUnixFDList or %NULL.
Return location for a #GUnixFDList or %NULL.
A #GCancellable or %NULL.
Closes @connection. Note that this never causes the process to
exit (this might only happen if the other end of a shared message
bus connection disconnects, see #GDBusConnection:exit-on-close).
Once the connection is closed, operations such as sending a message
will return with the error %G_IO_ERROR_CLOSED. Closing a connection
will not automatically flush the connection so queued messages may
be lost. Use g_dbus_connection_flush() if you need such guarantees.
If @connection is already closed, this method fails with
%G_IO_ERROR_CLOSED.
When @connection has been closed, the #GDBusConnection::closed
signal is emitted in the <link
linkend="g-main-context-push-thread-default">thread-default main
loop</link> of the thread that @connection was constructed in.
This is an asynchronous method. When the operation is finished,
@callback will be invoked in the <link
linkend="g-main-context-push-thread-default">thread-default main
loop</link> of the thread you are calling this method from. You can
then call g_dbus_connection_close_finish() to get the result of the
operation. See g_dbus_connection_close_sync() for the synchronous
version.
A #GDBusConnection.
A #GCancellable or %NULL.
A #GAsyncReadyCallback to call when the request is satisfied or %NULL if you don't care about the result.
The data to pass to @callback.
Finishes an operation started with g_dbus_connection_close().
%TRUE if the operation succeeded, %FALSE if @error is set.
A #GDBusConnection.
A #GAsyncResult obtained from the #GAsyncReadyCallback passed to g_dbus_connection_close().
Synchronously closees @connection. The calling thread is blocked
until this is done. See g_dbus_connection_close() for the
asynchronous version of this method and more details about what it
does.
%TRUE if the operation succeeded, %FALSE if @error is set.
A #GDBusConnection.
A #GCancellable or %NULL.
Emits a signal.
If the parameters GVariant is floating, it is consumed.
This can only fail if @parameters is not compatible with the D-Bus protocol.
%TRUE unless @error is set.
A #GDBusConnection.
The unique bus name for the destination for the signal or %NULL to emit to all listeners.
Path of remote object.
D-Bus interface to emit a signal on.
The name of the signal to emit.
A #GVariant tuple with parameters for the signal or %NULL if not passing parameters.
Exports @action_group on @connection at @object_path.
The implemented D-Bus API should be considered private. It is
subject to change in the future.
A given object path can only have one action group exported on it.
If this constraint is violated, the export will fail and 0 will be
returned (with @error set accordingly).
You can unexport the action group using
g_dbus_connection_unexport_action_group() with the return value of
this function.
The thread default main context is taken at the time of this call.
All incoming action activations and state change requests are
reported from this context. Any changes on the action group that
cause it to emit signals must also come from this same context.
Since incoming action activations and state change requests are
rather likely to cause changes on the action group, this effectively
limits a given action group to being exported from only one main
context.
the ID of the export (never zero), or 0 in case of failure
a #GDBusConnection
a D-Bus object path
a #GActionGroup
Exports @menu on @connection at @object_path.
The implemented D-Bus API should be considered private.
It is subject to change in the future.
An object path can only have one menu model exported on it. If this
constraint is violated, the export will fail and 0 will be
returned (with @error set accordingly).
You can unexport the menu model using
g_dbus_connection_unexport_menu_model() with the return value of
this function.
the ID of the export (never zero), or 0 in case of failure
a #GDBusConnection
a D-Bus object path
a #GMenuModel
Asynchronously flushes @connection, that is, writes all queued
outgoing message to the transport and then flushes the transport
(using g_output_stream_flush_async()). This is useful in programs
that wants to emit a D-Bus signal and then exit
immediately. Without flushing the connection, there is no guarantee
that the message has been sent to the networking buffers in the OS
kernel.
This is an asynchronous method. When the operation is finished,
@callback will be invoked in the <link
linkend="g-main-context-push-thread-default">thread-default main
loop</link> of the thread you are calling this method from. You can
then call g_dbus_connection_flush_finish() to get the result of the
operation. See g_dbus_connection_flush_sync() for the synchronous
version.
A #GDBusConnection.
A #GCancellable or %NULL.
A #GAsyncReadyCallback to call when the request is satisfied or %NULL if you don't care about the result.
The data to pass to @callback.
Finishes an operation started with g_dbus_connection_flush().
%TRUE if the operation succeeded, %FALSE if @error is set.
A #GDBusConnection.
A #GAsyncResult obtained from the #GAsyncReadyCallback passed to g_dbus_connection_flush().
Synchronously flushes @connection. The calling thread is blocked
until this is done. See g_dbus_connection_flush() for the
asynchronous version of this method and more details about what it
does.
%TRUE if the operation succeeded, %FALSE if @error is set.
A #GDBusConnection.
A #GCancellable or %NULL.
Gets the capabilities negotiated with the remote peer
Zero or more flags from the #GDBusCapabilityFlags enumeration.
A #GDBusConnection.
Gets whether the process is terminated when @connection is
closed by the remote peer. See
#GDBusConnection:exit-on-close for more details.
Whether the process is terminated when @connection is closed by the remote peer.
A #GDBusConnection.
The GUID of the peer performing the role of server when
authenticating. See #GDBusConnection:guid for more details.
The GUID. Do not free this string, it is owned by @connection.
A #GDBusConnection.
Retrieves the last serial number assigned to a #GDBusMessage on
the current thread. This includes messages sent via both low-level
API such as g_dbus_connection_send_message() as well as
high-level API such as g_dbus_connection_emit_signal(),
g_dbus_connection_call() or g_dbus_proxy_call().
the last used serial or zero when no message has been sent within the current thread.
A #GDBusConnection.
Gets the credentials of the authenticated peer. This will always
return %NULL unless @connection acted as a server
(e.g. %G_DBUS_CONNECTION_FLAGS_AUTHENTICATION_SERVER was passed)
when set up and the client passed credentials as part of the
authentication process.
In a message bus setup, the message bus is always the server and
each application is a client. So this method will always return
%NULL for message bus clients.
A #GCredentials or %NULL if not available. Do not free this object, it is owned by @connection.
A #GDBusConnection.
Gets the underlying stream used for IO.
While the #GDBusConnection is active, it will interact with this
stream from a worker thread, so it is not safe to interact with
the stream directly.
the stream used for IO
a #GDBusConnection
Gets the unique name of @connection as assigned by the message
bus. This can also be used to figure out if @connection is a
message bus connection.
The unique name or %NULL if @connection is not a message bus connection. Do not free this string, it is owned by @connection.
A #GDBusConnection.
Gets whether @connection is closed.
%TRUE if the connection is closed, %FALSE otherwise.
A #GDBusConnection.
Registers callbacks for exported objects at @object_path with the
D-Bus interface that is described in @interface_info.
Calls to functions in @vtable (and @user_data_free_func) will
happen in the <link linkend="g-main-context-push-thread-default">thread-default main
loop</link> of the thread you are calling this method from.
Note that all #GVariant values passed to functions in @vtable will match
the signature given in @interface_info - if a remote caller passes
incorrect values, the <literal>org.freedesktop.DBus.Error.InvalidArgs</literal>
is returned to the remote caller.
Additionally, if the remote caller attempts to invoke methods or
access properties not mentioned in @interface_info the
<literal>org.freedesktop.DBus.Error.UnknownMethod</literal> resp.
<literal>org.freedesktop.DBus.Error.InvalidArgs</literal> errors
are returned to the caller.
It is considered a programming error if the
#GDBusInterfaceGetPropertyFunc function in @vtable returns a
#GVariant of incorrect type.
If an existing callback is already registered at @object_path and
@interface_name, then @error is set to #G_IO_ERROR_EXISTS.
GDBus automatically implements the standard D-Bus interfaces
org.freedesktop.DBus.Properties, org.freedesktop.DBus.Introspectable
and org.freedesktop.Peer, so you don't have to implement those for
the objects you export. You <emphasis>can</emphasis> implement
org.freedesktop.DBus.Properties yourself, e.g. to handle getting
and setting of properties asynchronously.
Note that the reference count on @interface_info will be
incremented by 1 (unless allocated statically, e.g. if the
reference count is -1, see g_dbus_interface_info_ref()) for as long
as the object is exported. Also note that @vtable will be copied.
See <xref linkend="gdbus-server"/> for an example of how to use this method.
0 if @error is set, otherwise a registration id (never 0) that can be used with g_dbus_connection_unregister_object() .
A #GDBusConnection.
The object path to register at.
Introspection data for the interface.
A #GDBusInterfaceVTable to call into or %NULL.
Data to pass to functions in @vtable.
Function to call when the object path is unregistered.
Registers a whole subtree of <quote>dynamic</quote> objects.
The @enumerate and @introspection functions in @vtable are used to
convey, to remote callers, what nodes exist in the subtree rooted
by @object_path.
When handling remote calls into any node in the subtree, first the
@enumerate function is used to check if the node exists. If the node exists
or the #G_DBUS_SUBTREE_FLAGS_DISPATCH_TO_UNENUMERATED_NODES flag is set
the @introspection function is used to check if the node supports the
requested method. If so, the @dispatch function is used to determine
where to dispatch the call. The collected #GDBusInterfaceVTable and
#gpointer will be used to call into the interface vtable for processing
the request.
All calls into user-provided code will be invoked in the <link
linkend="g-main-context-push-thread-default">thread-default main
loop</link> of the thread you are calling this method from.
If an existing subtree is already registered at @object_path or
then @error is set to #G_IO_ERROR_EXISTS.
Note that it is valid to register regular objects (using
g_dbus_connection_register_object()) in a subtree registered with
g_dbus_connection_register_subtree() - if so, the subtree handler
is tried as the last resort. One way to think about a subtree
handler is to consider it a <quote>fallback handler</quote>
for object paths not registered via g_dbus_connection_register_object()
or other bindings.
Note that @vtable will be copied so you cannot change it after
registration.
See <xref linkend="gdbus-subtree-server"/> for an example of how to use this method.
0 if @error is set, otherwise a subtree registration id (never 0) that can be used with g_dbus_connection_unregister_subtree() .
A #GDBusConnection.
The object path to register the subtree at.
A #GDBusSubtreeVTable to enumerate, introspect and dispatch nodes in the subtree.
Flags used to fine tune the behavior of the subtree.
Data to pass to functions in @vtable.
Function to call when the subtree is unregistered.
Removes a filter.
a #GDBusConnection
an identifier obtained from g_dbus_connection_add_filter()
Asynchronously sends @message to the peer represented by @connection.
Unless @flags contain the
%G_DBUS_SEND_MESSAGE_FLAGS_PRESERVE_SERIAL flag, the serial number
will be assigned by @connection and set on @message via
g_dbus_message_set_serial(). If @out_serial is not %NULL, then the
serial number used will be written to this location prior to
submitting the message to the underlying transport.
If @connection is closed then the operation will fail with
%G_IO_ERROR_CLOSED. If @message is not well-formed,
the operation fails with %G_IO_ERROR_INVALID_ARGUMENT.
See <xref linkend="gdbus-server"/> and <xref
linkend="gdbus-unix-fd-client"/> for an example of how to use this
low-level API to send and receive UNIX file descriptors.
Note that @message must be unlocked, unless @flags contain the
%G_DBUS_SEND_MESSAGE_FLAGS_PRESERVE_SERIAL flag.
%TRUE if the message was well-formed and queued for transmission, %FALSE if @error is set.
A #GDBusConnection.
A #GDBusMessage
Flags affecting how the message is sent.
Return location for serial number assigned to @message when sending it or %NULL.
Asynchronously sends @message to the peer represented by @connection.
Unless @flags contain the
%G_DBUS_SEND_MESSAGE_FLAGS_PRESERVE_SERIAL flag, the serial number
will be assigned by @connection and set on @message via
g_dbus_message_set_serial(). If @out_serial is not %NULL, then the
serial number used will be written to this location prior to
submitting the message to the underlying transport.
If @connection is closed then the operation will fail with
%G_IO_ERROR_CLOSED. If @cancellable is canceled, the operation will
fail with %G_IO_ERROR_CANCELLED. If @message is not well-formed,
the operation fails with %G_IO_ERROR_INVALID_ARGUMENT.
This is an asynchronous method. When the operation is finished, @callback will be invoked
in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link>
of the thread you are calling this method from. You can then call
g_dbus_connection_send_message_with_reply_finish() to get the result of the operation.
See g_dbus_connection_send_message_with_reply_sync() for the synchronous version.
Note that @message must be unlocked, unless @flags contain the
%G_DBUS_SEND_MESSAGE_FLAGS_PRESERVE_SERIAL flag.
See <xref linkend="gdbus-server"/> and <xref
linkend="gdbus-unix-fd-client"/> for an example of how to use this
low-level API to send and receive UNIX file descriptors.
A #GDBusConnection.
A #GDBusMessage.
Flags affecting how the message is sent.
The timeout in milliseconds, -1 to use the default timeout or %G_MAXINT for no timeout.
Return location for serial number assigned to @message when sending it or %NULL.
A #GCancellable or %NULL.
A #GAsyncReadyCallback to call when the request is satisfied or %NULL if you don't care about the result.
The data to pass to @callback.
Finishes an operation started with g_dbus_connection_send_message_with_reply().
Note that @error is only set if a local in-process error
occurred. That is to say that the returned #GDBusMessage object may
be of type %G_DBUS_MESSAGE_TYPE_ERROR. Use
g_dbus_message_to_gerror() to transcode this to a #GError.
See <xref linkend="gdbus-server"/> and <xref
linkend="gdbus-unix-fd-client"/> for an example of how to use this
low-level API to send and receive UNIX file descriptors.
A locked #GDBusMessage or %NULL if @error is set.
a #GDBusConnection
A #GAsyncResult obtained from the #GAsyncReadyCallback passed to g_dbus_connection_send_message_with_reply().
Synchronously sends @message to the peer represented by @connection
and blocks the calling thread until a reply is received or the
timeout is reached. See g_dbus_connection_send_message_with_reply()
for the asynchronous version of this method.
Unless @flags contain the
%G_DBUS_SEND_MESSAGE_FLAGS_PRESERVE_SERIAL flag, the serial number
will be assigned by @connection and set on @message via
g_dbus_message_set_serial(). If @out_serial is not %NULL, then the
serial number used will be written to this location prior to
submitting the message to the underlying transport.
If @connection is closed then the operation will fail with
%G_IO_ERROR_CLOSED. If @cancellable is canceled, the operation will
fail with %G_IO_ERROR_CANCELLED. If @message is not well-formed,
the operation fails with %G_IO_ERROR_INVALID_ARGUMENT.
Note that @error is only set if a local in-process error
occurred. That is to say that the returned #GDBusMessage object may
be of type %G_DBUS_MESSAGE_TYPE_ERROR. Use
g_dbus_message_to_gerror() to transcode this to a #GError.
See <xref linkend="gdbus-server"/> and <xref
linkend="gdbus-unix-fd-client"/> for an example of how to use this
low-level API to send and receive UNIX file descriptors.
Note that @message must be unlocked, unless @flags contain the
%G_DBUS_SEND_MESSAGE_FLAGS_PRESERVE_SERIAL flag.
A locked #GDBusMessage that is the reply to @message or %NULL if @error is set.
A #GDBusConnection.
A #GDBusMessage.
Flags affecting how the message is sent.
The timeout in milliseconds, -1 to use the default timeout or %G_MAXINT for no timeout.
Return location for serial number assigned to @message when sending it or %NULL.
A #GCancellable or %NULL.
Sets whether the process should be terminated when @connection is
closed by the remote peer. See #GDBusConnection:exit-on-close for
more details.
Note that this function should be used with care. Most modern UNIX
desktops tie the notion of a user session the session bus, and expect
all of a users applications to quit when their bus connection goes away.
If you are setting @exit_on_close to %FALSE for the shared session
bus connection, you should make sure that your application exits
when the user session ends.
A #GDBusConnection.
Whether the process should be terminated when @connection is closed by the remote peer.
Subscribes to signals on @connection and invokes @callback with a
whenever the signal is received. Note that @callback
will be invoked in the <link
linkend="g-main-context-push-thread-default">thread-default main
loop</link> of the thread you are calling this method from.
If @connection is not a message bus connection, @sender must be
%NULL.
If @sender is a well-known name note that @callback is invoked with
the unique name for the owner of @sender, not the well-known name
as one would expect. This is because the message bus rewrites the
name. As such, to avoid certain race conditions, users should be
tracking the name owner of the well-known name and use that when
processing the received signal.
If one of %G_DBUS_SIGNAL_FLAGS_MATCH_ARG0_NAMESPACE or
%G_DBUS_SIGNAL_FLAGS_MATCH_ARG0_PATH are given, @arg0 is
interpreted as part of a namespace or path. The first argument
of a signal is matched against that part as specified by D-Bus.
A subscription identifier that can be used with g_dbus_connection_signal_unsubscribe().
A #GDBusConnection.
Sender name to match on (unique or well-known name) or %NULL to listen from all senders.
D-Bus interface name to match on or %NULL to match on all interfaces.
D-Bus signal name to match on or %NULL to match on all signals.
Object path to match on or %NULL to match on all object paths.
Contents of first string argument to match on or %NULL to match on all kinds of arguments.
Flags describing how to subscribe to the signal (currently unused).
Callback to invoke when there is a signal matching the requested data.
User data to pass to @callback.
Function to free @user_data with when subscription is removed or %NULL.
Unsubscribes from signals.
A #GDBusConnection.
A subscription id obtained from g_dbus_connection_signal_subscribe().
If @connection was created with
%G_DBUS_CONNECTION_FLAGS_DELAY_MESSAGE_PROCESSING, this method
starts processing messages. Does nothing on if @connection wasn't
created with this flag or if the method has already been called.
A #GDBusConnection.
Reverses the effect of a previous call to
g_dbus_connection_export_action_group().
It is an error to call this function with an ID that wasn't returned
from g_dbus_connection_export_action_group() or to call it with the
same ID more than once.
a #GDBusConnection
the ID from g_dbus_connection_export_action_group()
Reverses the effect of a previous call to
g_dbus_connection_export_menu_model().
It is an error to call this function with an ID that wasn't returned
from g_dbus_connection_export_menu_model() or to call it with the
same ID more than once.
a #GDBusConnection
the ID from g_dbus_connection_export_menu_model()
Unregisters an object.
%TRUE if the object was unregistered, %FALSE otherwise.
A #GDBusConnection.
A registration id obtained from g_dbus_connection_register_object().
Unregisters a subtree.
%TRUE if the subtree was unregistered, %FALSE otherwise.
A #GDBusConnection.
A subtree registration id obtained from g_dbus_connection_register_subtree().
A D-Bus address specifying potential endpoints that can be used
when establishing the connection.
A #GDBusAuthObserver object to assist in the authentication process or %NULL.
Flags from the #GDBusCapabilityFlags enumeration
representing connection features negotiated with the other peer.
A boolean specifying whether the connection has been closed.
A boolean specifying whether the process will be terminated (by
calling <literal>raise(SIGTERM)</literal>) if the connection
is closed by the remote peer.
Note that #GDBusConnection objects returned by g_bus_get_finish() and
g_bus_get_sync() will (usually) have this property set to %TRUE.
Flags from the #GDBusConnectionFlags enumeration.
The GUID of the peer performing the role of server when
authenticating.
If you are constructing a #GDBusConnection and pass
%G_DBUS_CONNECTION_FLAGS_AUTHENTICATION_SERVER in the
#GDBusConnection:flags property then you MUST also set this
property to a valid guid.
If you are constructing a #GDBusConnection and pass
%G_DBUS_CONNECTION_FLAGS_AUTHENTICATION_CLIENT in the
#GDBusConnection:flags property you will be able to read the GUID
of the other peer here after the connection has been successfully
initialized.
The underlying #GIOStream used for I/O.
If this is passed on construction and is a #GSocketConnection,
then the corresponding #GSocket will be put into non-blocking mode.
While the #GDBusConnection is active, it will interact with this
stream from a worker thread, so it is not safe to interact with
the stream directly.
The unique name as assigned by the message bus or %NULL if the
connection is not open or not a message bus connection.
Emitted when the connection is closed.
The cause of this event can be
<itemizedlist>
<listitem><para>
If g_dbus_connection_close() is called. In this case
@remote_peer_vanished is set to %FALSE and @error is %NULL.
</para></listitem>
<listitem><para>
If the remote peer closes the connection. In this case
@remote_peer_vanished is set to %TRUE and @error is set.
</para></listitem>
<listitem><para>
If the remote peer sends invalid or malformed data. In this
case @remote_peer_vanished is set to %FALSE and @error
is set.
</para></listitem>
</itemizedlist>
Upon receiving this signal, you should give up your reference to
@connection. You are guaranteed that this signal is emitted only
once.
%TRUE if @connection is closed because the remote peer closed its end of the connection.
A #GError with more details about the event or %NULL.
Flags used when creating a new #GDBusConnection.
No flags set.
Perform authentication against server.
Perform authentication against client.
When authenticating as a server, allow the anonymous authentication method.
Pass this flag if connecting to a peer that is a message bus. This means that the Hello() method will be invoked as part of the connection setup.
If set, processing of D-Bus messages is delayed until g_dbus_connection_start_message_processing() is called.
Error codes for the %G_DBUS_ERROR error domain.
A generic error; "something went wrong" - see the error message for more.
There was not enough memory to complete an operation.
The bus doesn't know how to launch a service to supply the bus name you wanted.
The bus name you referenced doesn't exist (i.e. no application owns it).
No reply to a message expecting one, usually means a timeout occurred.
Something went wrong reading or writing to a socket, for example.
A D-Bus bus address was malformed.
Requested operation isn't supported (like ENOSYS on UNIX).
Some limited resource is exhausted.
Security restrictions don't allow doing what you're trying to do.
Authentication didn't work.
Unable to connect to server (probably caused by ECONNREFUSED on a socket).
Certain timeout errors, possibly ETIMEDOUT on a socket. Note that %G_DBUS_ERROR_NO_REPLY is used for message reply timeouts. Warning: this is confusingly-named given that %G_DBUS_ERROR_TIMED_OUT also exists. We can't fix it for compatibility reasons so just be careful.
No network access (probably ENETUNREACH on a socket).
Can't bind a socket since its address is in use (i.e. EADDRINUSE).
The connection is disconnected and you're trying to use it.
Invalid arguments passed to a method call.
Missing file.
Existing file and the operation you're using does not silently overwrite.
Method name you invoked isn't known by the object you invoked it on.
Certain timeout errors, e.g. while starting a service. Warning: this is confusingly-named given that %G_DBUS_ERROR_TIMEOUT also exists. We can't fix it for compatibility reasons so just be careful.
Tried to remove or modify a match rule that didn't exist.
The match rule isn't syntactically valid.
While starting a new process, the exec() call failed.
While starting a new process, the fork() call failed.
While starting a new process, the child exited with a status code.
While starting a new process, the child exited on a signal.
While starting a new process, something went wrong.
We failed to setup the environment correctly.
We failed to setup the config parser correctly.
Bus name was not valid.
Service file not found in system-services directory.
Permissions are incorrect on the setuid helper.
Service file invalid (Name, User or Exec missing).
Tried to get a UNIX process ID and it wasn't available.
Tried to get a UNIX process ID and it wasn't available.
A type signature is not valid.
A file contains invalid syntax or is otherwise broken.
Asked for SELinux security context and it wasn't available.
Asked for ADT audit data and it wasn't available.
There's already an object with the requested object path.
Creates a D-Bus error name to use for @error. If @error matches
a registered error (cf. g_dbus_error_register_error()), the corresponding
D-Bus error name will be returned.
Otherwise the a name of the form
<literal>org.gtk.GDBus.UnmappedGError.Quark._ESCAPED_QUARK_NAME.Code_ERROR_CODE</literal>
will be used. This allows other GDBus applications to map the error
on the wire back to a #GError using g_dbus_error_new_for_dbus_error().
This function is typically only used in object mappings to put a
#GError on the wire. Regular applications should not use it.
A D-Bus error name (never %NULL). Free with g_free().
A #GError.
Gets the D-Bus error name used for @error, if any.
This function is guaranteed to return a D-Bus error name for all
#GError<!-- -->s returned from functions handling remote method
calls (e.g. g_dbus_connection_call_finish()) unless
g_dbus_error_strip_remote_error() has been used on @error.
An allocated string or %NULL if the D-Bus error name could not be found. Free with g_free().
A #GError.
Checks if @error represents an error received via D-Bus from a remote peer. If so,
use g_dbus_error_get_remote_error() to get the name of the error.
%TRUE if @error represents an error from a remote peer, %FALSE otherwise.
A #GError.
Creates a #GError based on the contents of @dbus_error_name and
@dbus_error_message.
Errors registered with g_dbus_error_register_error() will be looked
up using @dbus_error_name and if a match is found, the error domain
and code is used. Applications can use g_dbus_error_get_remote_error()
to recover @dbus_error_name.
If a match against a registered error is not found and the D-Bus
error name is in a form as returned by g_dbus_error_encode_gerror()
the error domain and code encoded in the name is used to
create the #GError. Also, @dbus_error_name is added to the error message
such that it can be recovered with g_dbus_error_get_remote_error().
Otherwise, a #GError with the error code %G_IO_ERROR_DBUS_ERROR
in the #G_IO_ERROR error domain is returned. Also, @dbus_error_name is
added to the error message such that it can be recovered with
g_dbus_error_get_remote_error().
In all three cases, @dbus_error_name can always be recovered from the
returned #GError using the g_dbus_error_get_remote_error() function
(unless g_dbus_error_strip_remote_error() hasn't been used on the returned error).
This function is typically only used in object mappings to prepare
#GError instances for applications. Regular applications should not use
it.
An allocated #GError. Free with g_error_free().
D-Bus error name.
D-Bus error message.
Creates an association to map between @dbus_error_name and
#GError<!-- -->s specified by @error_domain and @error_code.
This is typically done in the routine that returns the #GQuark for
an error domain.
%TRUE if the association was created, %FALSE if it already exists.
A #GQuark for a error domain.
An error code.
A D-Bus error name.
Helper function for associating a #GError error domain with D-Bus error names.
The error domain name.
A pointer where to store the #GQuark.
A pointer to @num_entries #GDBusErrorEntry struct items.
Number of items to register.
Does nothing if @error is %NULL. Otherwise sets *@error to
a new #GError created with g_dbus_error_new_for_dbus_error()
with @dbus_error_message prepend with @format (unless %NULL).
A pointer to a #GError or %NULL.
D-Bus error name.
D-Bus error message.
printf()-style format to prepend to @dbus_error_message or %NULL.
Like g_dbus_error_set_dbus_error() but intended for language bindings.
A pointer to a #GError or %NULL.
D-Bus error name.
D-Bus error message.
printf()-style format to prepend to @dbus_error_message or %NULL.
Arguments for @format.
Looks for extra information in the error message used to recover
the D-Bus error name and strips it if found. If stripped, the
message field in @error will correspond exactly to what was
received on the wire.
This is typically used when presenting errors to the end user.
%TRUE if information was stripped, %FALSE otherwise.
A #GError.
Destroys an association previously set up with g_dbus_error_register_error().
%TRUE if the association was destroyed, %FALSE if it wasn't found.
A #GQuark for a error domain.
An error code.
A D-Bus error name.
Struct used in g_dbus_error_register_error_domain().
The #GDBusInterface type is the base type for D-Bus interfaces both
on the service side (see #GDBusInterfaceSkeleton) and client side
(see #GDBusProxy).
Gets the #GDBusObject that @interface_ belongs to, if any.
A #GDBusObject or %NULL. The returned reference should be freed with g_object_unref().
Gets D-Bus introspection information for the D-Bus interface
implemented by @interface_.
A #GDBusInterfaceInfo. Do not free.
Gets the #GDBusObject that @interface_ belongs to, if any.
<warning>It is not safe to use the returned object if @interface_
or the returned object is being used from other threads. See
g_dbus_interface_dup_object() for a thread-safe
alternative.</warning>
A #GDBusObject or %NULL. The returned reference belongs to @interface_ and should not be freed.
Sets the #GDBusObject for @interface_ to @object.
Note that @interface_ will hold a weak reference to @object.
A #GDBusObject or %NULL.
Gets the #GDBusObject that @interface_ belongs to, if any.
A #GDBusObject or %NULL. The returned reference should be freed with g_object_unref().
An exported D-Bus interface.
Gets D-Bus introspection information for the D-Bus interface
implemented by @interface_.
A #GDBusInterfaceInfo. Do not free.
An exported D-Bus interface.
Gets the #GDBusObject that @interface_ belongs to, if any.
<warning>It is not safe to use the returned object if @interface_
or the returned object is being used from other threads. See
g_dbus_interface_dup_object() for a thread-safe
alternative.</warning>
A #GDBusObject or %NULL. The returned reference belongs to @interface_ and should not be freed.
An exported D-Bus interface.
Sets the #GDBusObject for @interface_ to @object.
Note that @interface_ will hold a weak reference to @object.
An exported D-Bus interface.
A #GDBusObject or %NULL.
The type of the @get_property function in #GDBusInterfaceVTable.
A #GVariant with the value for @property_name or %NULL if @error is set. If the returned #GVariant is floating, it is consumed - otherwise its reference count is decreased by one.
A #GDBusConnection.
The unique bus name of the remote caller.
The object path that the method was invoked on.
The D-Bus interface name for the property.
The name of the property to get the value of.
Return location for error.
The @user_data #gpointer passed to g_dbus_connection_register_object().
Base type for D-Bus interfaces.
A #GDBusInterfaceInfo. Do not free.
A #GDBusObject or %NULL. The returned reference belongs to @interface_ and should not be freed.
A #GDBusObject or %NULL.
A #GDBusObject or %NULL. The returned reference should be freed with g_object_unref().
Information about a D-Bus interface.
Builds a lookup-cache to speed up
g_dbus_interface_info_lookup_method(),
g_dbus_interface_info_lookup_signal() and
g_dbus_interface_info_lookup_property().
If this has already been called with @info, the existing cache is
used and its use count is increased.
Note that @info cannot be modified until
g_dbus_interface_info_cache_release() is called.
A #GDBusInterfaceInfo.
Decrements the usage count for the cache for @info built by
g_dbus_interface_info_cache_build() (if any) and frees the
resources used by the cache if the usage count drops to zero.
A GDBusInterfaceInfo
Appends an XML representation of @info (and its children) to @string_builder.
This function is typically used for generating introspection XML
documents at run-time for handling the
<literal>org.freedesktop.DBus.Introspectable.Introspect</literal>
method.
A #GDBusNodeInfo
Indentation level.
A #GString to to append XML data to.
Looks up information about a method.
The cost of this function is O(n) in number of methods unless
g_dbus_interface_info_cache_build() has been used on @info.
A #GDBusMethodInfo or %NULL if not found. Do not free, it is owned by @info.
A #GDBusInterfaceInfo.
A D-Bus method name (typically in CamelCase)
Looks up information about a property.
The cost of this function is O(n) in number of properties unless
g_dbus_interface_info_cache_build() has been used on @info.
A #GDBusPropertyInfo or %NULL if not found. Do not free, it is owned by @info.
A #GDBusInterfaceInfo.
A D-Bus property name (typically in CamelCase).
Looks up information about a signal.
The cost of this function is O(n) in number of signals unless
g_dbus_interface_info_cache_build() has been used on @info.
A #GDBusSignalInfo or %NULL if not found. Do not free, it is owned by @info.
A #GDBusInterfaceInfo.
A D-Bus signal name (typically in CamelCase)
If @info is statically allocated does nothing. Otherwise increases
the reference count.
The same @info.
A #GDBusInterfaceInfo
If @info is statically allocated, does nothing. Otherwise decreases
the reference count of @info. When its reference count drops to 0,
the memory used is freed.
A #GDBusInterfaceInfo.
The type of the @method_call function in #GDBusInterfaceVTable.
A #GDBusConnection.
The unique bus name of the remote caller.
The object path that the method was invoked on.
The D-Bus interface name the method was invoked on.
The name of the method that was invoked.
A #GVariant tuple with parameters.
A #GDBusMethodInvocation object that can be used to return a value or error.
The @user_data #gpointer passed to g_dbus_connection_register_object().
The type of the @set_property function in #GDBusInterfaceVTable.
%TRUE if the property was set to @value, %FALSE if @error is set.
A #GDBusConnection.
The unique bus name of the remote caller.
The object path that the method was invoked on.
The D-Bus interface name for the property.
The name of the property to get the value of.
The value to set the property to.
Return location for error.
The @user_data #gpointer passed to g_dbus_connection_register_object().
Abstract base class for D-Bus interfaces on the service side.
If @interface_ has outstanding changes, request for these changes to be
emitted immediately.
For example, an exported D-Bus interface may queue up property
changes and emit the
<literal>org.freedesktop.DBus.Properties::PropertiesChanged</literal>
signal later (e.g. in an idle handler). This technique is useful
for collapsing multiple property changes into one.
Gets D-Bus introspection information for the D-Bus interface
implemented by @interface_.
A #GDBusInterfaceInfo (never %NULL). Do not free.
Gets all D-Bus properties for @interface_.
A #GVariant of type <link linkend="G-VARIANT-TYPE-VARDICT:CAPS">'a{sv}'</link>. Free with g_variant_unref().
Gets the interface vtable for the D-Bus interface implemented by
@interface_. The returned function pointers should expect @interface_
itself to be passed as @user_data.
A #GDBusInterfaceVTable (never %NULL).
Exports @interface_ at @object_path on @connection.
This can be called multiple times to export the same @interface_
onto multiple connections however the @object_path provided must be
the same for all connections.
Use g_dbus_interface_skeleton_unexport() to unexport the object.
%TRUE if the interface was exported on @connection, otherwise %FALSE with @error set.
The D-Bus interface to export.
A #GDBusConnection to export @interface_ on.
The path to export the interface at.
If @interface_ has outstanding changes, request for these changes to be
emitted immediately.
For example, an exported D-Bus interface may queue up property
changes and emit the
<literal>org.freedesktop.DBus.Properties::PropertiesChanged</literal>
signal later (e.g. in an idle handler). This technique is useful
for collapsing multiple property changes into one.
A #GDBusInterfaceSkeleton.
Gets the first connection that @interface_ is exported on, if any.
A #GDBusConnection or %NULL if @interface_ is not exported anywhere. Do not free, the object belongs to @interface_.
A #GDBusInterfaceSkeleton.
Gets a list of the connections that @interface_ is exported on.
A list of all the connections that @interface_ is exported on. The returned list should be freed with g_list_free() after each element has been freed with g_object_unref().
A #GDBusInterfaceSkeleton.
Gets the #GDBusInterfaceSkeletonFlags that describes what the behavior
of @interface_
One or more flags from the #GDBusInterfaceSkeletonFlags enumeration.
A #GDBusInterfaceSkeleton.
Gets D-Bus introspection information for the D-Bus interface
implemented by @interface_.
A #GDBusInterfaceInfo (never %NULL). Do not free.
A #GDBusInterfaceSkeleton.
Gets the object path that @interface_ is exported on, if any.
A string owned by @interface_ or %NULL if @interface_ is not exported anywhere. Do not free, the string belongs to @interface_.
A #GDBusInterfaceSkeleton.
Gets all D-Bus properties for @interface_.
A #GVariant of type <link linkend="G-VARIANT-TYPE-VARDICT:CAPS">'a{sv}'</link>. Free with g_variant_unref().
A #GDBusInterfaceSkeleton.
Gets the interface vtable for the D-Bus interface implemented by
@interface_. The returned function pointers should expect @interface_
itself to be passed as @user_data.
A #GDBusInterfaceVTable (never %NULL).
A #GDBusInterfaceSkeleton.
Checks if @interface_ is exported on @connection.
%TRUE if @interface_ is exported on @connection, %FALSE otherwise.
A #GDBusInterfaceSkeleton.
A #GDBusConnection.
Sets flags describing what the behavior of @skeleton should be.
A #GDBusInterfaceSkeleton.
Flags from the #GDBusInterfaceSkeletonFlags enumeration.
Stops exporting @interface_ on all connections it is exported on.
To unexport @interface_ from only a single connection, use
g_dbus_interface_skeleton_unexport_from_connection()
A #GDBusInterfaceSkeleton.
Stops exporting @interface_ on @connection.
To stop exporting on all connections the interface is exported on,
use g_dbus_interface_skeleton_unexport().
A #GDBusInterfaceSkeleton.
A #GDBusConnection.
Flags from the #GDBusInterfaceSkeletonFlags enumeration.
Emitted when a method is invoked by a remote caller and used to
determine if the method call is authorized.
Note that this signal is emitted in a thread dedicated to
handling the method call so handlers are allowed to perform
blocking IO. This means that it is appropriate to call
e.g. <ulink
url="http://hal.freedesktop.org/docs/polkit/PolkitAuthority.html#polkit-authority-check-authorization-sync">polkit_authority_check_authorization_sync()</ulink>
with the <ulink
url="http://hal.freedesktop.org/docs/polkit/PolkitAuthority.html#POLKIT-CHECK-AUTHORIZATION-FLAGS-ALLOW-USER-INTERACTION:CAPS">POLKIT_CHECK_AUTHORIZATION_FLAGS_ALLOW_USER_INTERACTION</ulink> flag set.
If %FALSE is returned then no further handlers are run and the
signal handler must take a reference to @invocation and finish
handling the call (e.g. return an error via
g_dbus_method_invocation_return_error()).
Otherwise, if %TRUE is returned, signal emission continues. If no
handlers return %FALSE, then the method is dispatched. If
@interface has an enclosing #GDBusObjectSkeleton, then the
#GDBusObjectSkeleton::authorize-method signal handlers run before
the handlers for this signal.
The default class handler just returns %TRUE.
Please note that the common case is optimized: if no signals
handlers are connected and the default class handler isn't
overridden (for both @interface and the enclosing
#GDBusObjectSkeleton, if any) and #GDBusInterfaceSkeleton:g-flags does
not have the
%G_DBUS_INTERFACE_SKELETON_FLAGS_HANDLE_METHOD_INVOCATIONS_IN_THREAD
flags set, no dedicated thread is ever used and the call will be
handled in the same thread as the object that @interface belongs
to was exported in.
%TRUE if the call is authorized, %FALSE otherwise.
A #GDBusMethodInvocation.
Class structure for #GDBusInterfaceSkeleton.
A #GDBusInterfaceInfo (never %NULL). Do not free.
A #GDBusInterfaceVTable (never %NULL).
A #GVariant of type <link linkend="G-VARIANT-TYPE-VARDICT:CAPS">'a{sv}'</link>. Free with g_variant_unref().
Flags describing the behavior of a #GDBusInterfaceSkeleton instance.
No flags set.
Each method invocation is handled in a thread dedicated to the invocation. This means that the method implementation can use blocking IO without blocking any other part of the process. It also means that the method implementation must use locking to access data structures used by other threads.
Virtual table for handling properties and method calls for a D-Bus
interface.
Since 2.38, if you want to handle getting/setting D-Bus properties
asynchronously, give %NULL as your get_property() or set_property()
function. The D-Bus call will be directed to your @method_call
function, with the provided @interface_name set to
<literal>"org.freedesktop.DBus.Properties"</literal>.
The usual checks on the validity of the calls is performed. For
<literal>'Get'</literal> calls, an error is automatically returned if
the property does not exist or the permissions do not allow access.
The same checks are performed for <literal>'Set'</literal> calls, and
the provided value is also checked for being the correct type.
For both <literal>'Get'</literal> and <literal>'Set'</literal> calls,
the #GDBusMethodInvocation passed to the method_call handler can be
queried with g_dbus_method_invocation_get_property_info() to get a
pointer to the #GDBusPropertyInfo of the property.
If you have readable properties specified in your interface info, you
must ensure that you either provide a non-%NULL @get_property()
function or provide implementations of both the
<literal>'Get'</literal> and <literal>'GetAll'</literal> methods on
the <literal>'org.freedesktop.DBus.Properties'</literal> interface in
your @method_call function. Note that the required return type of
the <literal>'Get'</literal> call is <literal>(v)</literal>, not the
type of the property. <literal>'GetAll'</literal> expects a return
value of type <literal>a{sv}</literal>.
If you have writable properties specified in your interface info, you
must ensure that you either provide a non-%NULL @set_property()
function or provide an implementation of the <literal>'Set'</literal>
call. If implementing the call, you must return the value of type
%G_VARIANT_TYPE_UNIT.
#GDBusMenuModel is an implementation of #GMenuModel that can be used
as a proxy for a menu model that is exported over D-Bus with
g_dbus_connection_export_menu_model().
Obtains a #GDBusMenuModel for the menu model which is exported
at the given @bus_name and @object_path.
The thread default main context is taken at the time of this call.
All signals on the menu model (and any linked models) are reported
with respect to this context. All calls on the returned menu model
(and linked models) must also originate from this same context, with
the thread default main context unchanged.
a #GDBusMenuModel object. Free with g_object_unref().
a #GDBusConnection
the bus name which exports the menu model
the object path at which the menu model is exported
A type for representing D-Bus messages that can be sent or received
on a #GDBusConnection.
Creates a new empty #GDBusMessage.
A #GDBusMessage. Free with g_object_unref().
Creates a new #GDBusMessage from the data stored at @blob. The byte
order that the message was in can be retrieved using
g_dbus_message_get_byte_order().
A new #GDBusMessage or %NULL if @error is set. Free with g_object_unref().
A blob represent a binary D-Bus message.
The length of @blob.
A #GDBusCapabilityFlags describing what protocol features are supported.
Creates a new #GDBusMessage for a method call.
A #GDBusMessage. Free with g_object_unref().
A valid D-Bus name or %NULL.
A valid object path.
A valid D-Bus interface name or %NULL.
A valid method name.
Creates a new #GDBusMessage for a signal emission.
A #GDBusMessage. Free with g_object_unref().
A valid object path.
A valid D-Bus interface name.
A valid signal name.
Utility function to calculate how many bytes are needed to
completely deserialize the D-Bus message stored at @blob.
Number of bytes needed or -1 if @error is set (e.g. if @blob contains invalid data or not enough data is available to determine the size).
A blob represent a binary D-Bus message.
The length of @blob (must be at least 16).
Copies @message. The copy is a deep copy and the returned
#GDBusMessage is completely identical except that it is guaranteed
to not be locked.
This operation can fail if e.g. @message contains file descriptors
and the per-process or system-wide open files limit is reached.
A new #GDBusMessage or %NULL if @error is set. Free with g_object_unref().
A #GDBusMessage.
Convenience to get the first item in the body of @message.
The string item or %NULL if the first item in the body of @message is not a string.
A #GDBusMessage.
Gets the body of a message.
A #GVariant or %NULL if the body is empty. Do not free, it is owned by @message.
A #GDBusMessage.
Gets the byte order of @message.
The byte order.
A #GDBusMessage.
Convenience getter for the %G_DBUS_MESSAGE_HEADER_FIELD_DESTINATION header field.
The value.
A #GDBusMessage.
Convenience getter for the %G_DBUS_MESSAGE_HEADER_FIELD_ERROR_NAME header field.
The value.
A #GDBusMessage.
Gets the flags for @message.
Flags that are set (typically values from the #GDBusMessageFlags enumeration bitwise ORed together).
A #GDBusMessage.
Gets a header field on @message.
A #GVariant with the value if the header was found, %NULL otherwise. Do not free, it is owned by @message.
A #GDBusMessage.
A 8-bit unsigned integer (typically a value from the #GDBusMessageHeaderField enumeration)
Gets an array of all header fields on @message that are set.
An array of header fields terminated by %G_DBUS_MESSAGE_HEADER_FIELD_INVALID. Each element is a #guchar. Free with g_free().
A #GDBusMessage.
Convenience getter for the %G_DBUS_MESSAGE_HEADER_FIELD_INTERFACE header field.
The value.
A #GDBusMessage.
Checks whether @message is locked. To monitor changes to this
value, conncet to the #GObject::notify signal to listen for changes
on the #GDBusMessage:locked property.
%TRUE if @message is locked, %FALSE otherwise.
A #GDBusMessage.
Convenience getter for the %G_DBUS_MESSAGE_HEADER_FIELD_MEMBER header field.
The value.
A #GDBusMessage.
Gets the type of @message.
A 8-bit unsigned integer (typically a value from the #GDBusMessageType enumeration).
A #GDBusMessage.
Convenience getter for the %G_DBUS_MESSAGE_HEADER_FIELD_NUM_UNIX_FDS header field.
The value.
A #GDBusMessage.
Convenience getter for the %G_DBUS_MESSAGE_HEADER_FIELD_PATH header field.
The value.
A #GDBusMessage.
Convenience getter for the %G_DBUS_MESSAGE_HEADER_FIELD_REPLY_SERIAL header field.
The value.
A #GDBusMessage.
Convenience getter for the %G_DBUS_MESSAGE_HEADER_FIELD_SENDER header field.
The value.
A #GDBusMessage.
Gets the serial for @message.
A #guint32.
A #GDBusMessage.
Convenience getter for the %G_DBUS_MESSAGE_HEADER_FIELD_SIGNATURE header field.
The value.
A #GDBusMessage.
Gets the UNIX file descriptors associated with @message, if any.
This method is only available on UNIX.
A #GUnixFDList or %NULL if no file descriptors are associated. Do not free, this object is owned by @message.
A #GDBusMessage.
If @message is locked, does nothing. Otherwise locks the message.
A #GDBusMessage.
Creates a new #GDBusMessage that is an error reply to @method_call_message.
A #GDBusMessage. Free with g_object_unref().
A message of type %G_DBUS_MESSAGE_TYPE_METHOD_CALL to create a reply message to.
A valid D-Bus error name.
The D-Bus error message in a printf() format.
Creates a new #GDBusMessage that is an error reply to @method_call_message.
A #GDBusMessage. Free with g_object_unref().
A message of type %G_DBUS_MESSAGE_TYPE_METHOD_CALL to create a reply message to.
A valid D-Bus error name.
The D-Bus error message.
Like g_dbus_message_new_method_error() but intended for language bindings.
A #GDBusMessage. Free with g_object_unref().
A message of type %G_DBUS_MESSAGE_TYPE_METHOD_CALL to create a reply message to.
A valid D-Bus error name.
The D-Bus error message in a printf() format.
Arguments for @error_message_format.
Creates a new #GDBusMessage that is a reply to @method_call_message.
#GDBusMessage. Free with g_object_unref().
A message of type %G_DBUS_MESSAGE_TYPE_METHOD_CALL to create a reply message to.
Produces a human-readable multi-line description of @message.
The contents of the description has no ABI guarantees, the contents
and formatting is subject to change at any time. Typical output
looks something like this:
<programlisting>
Type: method-call
Flags: none
Version: 0
Serial: 4
Headers:
path -> objectpath '/org/gtk/GDBus/TestObject'
interface -> 'org.gtk.GDBus.TestInterface'
member -> 'GimmeStdout'
destination -> ':1.146'
Body: ()
UNIX File Descriptors:
(none)
</programlisting>
or
<programlisting>
Type: method-return
Flags: no-reply-expected
Version: 0
Serial: 477
Headers:
reply-serial -> uint32 4
destination -> ':1.159'
sender -> ':1.146'
num-unix-fds -> uint32 1
Body: ()
UNIX File Descriptors:
fd 12: dev=0:10,mode=020620,ino=5,uid=500,gid=5,rdev=136:2,size=0,atime=1273085037,mtime=1273085851,ctime=1272982635
</programlisting>
A string that should be freed with g_free().
A #GDBusMessage.
Indentation level.
Sets the body @message. As a side-effect the
%G_DBUS_MESSAGE_HEADER_FIELD_SIGNATURE header field is set to the
type string of @body (or cleared if @body is %NULL).
If @body is floating, @message assumes ownership of @body.
A #GDBusMessage.
Either %NULL or a #GVariant that is a tuple.
Sets the byte order of @message.
A #GDBusMessage.
The byte order.
Convenience setter for the %G_DBUS_MESSAGE_HEADER_FIELD_DESTINATION header field.
A #GDBusMessage.
The value to set.
Convenience setter for the %G_DBUS_MESSAGE_HEADER_FIELD_ERROR_NAME header field.
A #GDBusMessage.
The value to set.
Sets the flags to set on @message.
A #GDBusMessage.
Flags for @message that are set (typically values from the #GDBusMessageFlags enumeration bitwise ORed together).
Sets a header field on @message.
If @value is floating, @message assumes ownership of @value.
A #GDBusMessage.
A 8-bit unsigned integer (typically a value from the #GDBusMessageHeaderField enumeration)
A #GVariant to set the header field or %NULL to clear the header field.
Convenience setter for the %G_DBUS_MESSAGE_HEADER_FIELD_INTERFACE header field.
A #GDBusMessage.
The value to set.
Convenience setter for the %G_DBUS_MESSAGE_HEADER_FIELD_MEMBER header field.
A #GDBusMessage.
The value to set.
Sets @message to be of @type.
A #GDBusMessage.
A 8-bit unsigned integer (typically a value from the #GDBusMessageType enumeration).
Convenience setter for the %G_DBUS_MESSAGE_HEADER_FIELD_NUM_UNIX_FDS header field.
A #GDBusMessage.
The value to set.
Convenience setter for the %G_DBUS_MESSAGE_HEADER_FIELD_PATH header field.
A #GDBusMessage.
The value to set.
Convenience setter for the %G_DBUS_MESSAGE_HEADER_FIELD_REPLY_SERIAL header field.
A #GDBusMessage.
The value to set.
Convenience setter for the %G_DBUS_MESSAGE_HEADER_FIELD_SENDER header field.
A #GDBusMessage.
The value to set.
Sets the serial for @message.
A #GDBusMessage.
A #guint32.
Convenience setter for the %G_DBUS_MESSAGE_HEADER_FIELD_SIGNATURE header field.
A #GDBusMessage.
The value to set.
Sets the UNIX file descriptors associated with @message. As a
side-effect the %G_DBUS_MESSAGE_HEADER_FIELD_NUM_UNIX_FDS header
field is set to the number of fds in @fd_list (or cleared if
@fd_list is %NULL).
This method is only available on UNIX.
A #GDBusMessage.
A #GUnixFDList or %NULL.
Serializes @message to a blob. The byte order returned by
g_dbus_message_get_byte_order() will be used.
A pointer to a valid binary D-Bus message of @out_size bytes generated by @message or %NULL if @error is set. Free with g_free().
A #GDBusMessage.
Return location for size of generated blob.
A #GDBusCapabilityFlags describing what protocol features are supported.
If @message is not of type %G_DBUS_MESSAGE_TYPE_ERROR does
nothing and returns %FALSE.
Otherwise this method encodes the error in @message as a #GError
using g_dbus_error_set_dbus_error() using the information in the
%G_DBUS_MESSAGE_HEADER_FIELD_ERROR_NAME header field of @message as
well as the first string item in @message's body.
%TRUE if @error was set, %FALSE otherwise.
A #GDBusMessage.
Enumeration used to describe the byte order of a D-Bus message.
The byte order is big endian.
The byte order is little endian.
Signature for function used in g_dbus_connection_add_filter().
A filter function is passed a #GDBusMessage and expected to return
a #GDBusMessage too. Passive filter functions that don't modify the
message can simply return the @message object:
|[
static GDBusMessage *
passive_filter (GDBusConnection *connection
GDBusMessage *message,
gboolean incoming,
gpointer user_data)
{
/<!-- -->* inspect @message *<!-- -->/
return message;
}
]|
Filter functions that wants to drop a message can simply return %NULL:
|[
static GDBusMessage *
drop_filter (GDBusConnection *connection
GDBusMessage *message,
gboolean incoming,
gpointer user_data)
{
if (should_drop_message)
{
g_object_unref (message);
message = NULL;
}
return message;
}
]|
Finally, a filter function may modify a message by copying it:
|[
static GDBusMessage *
modifying_filter (GDBusConnection *connection
GDBusMessage *message,
gboolean incoming,
gpointer user_data)
{
GDBusMessage *copy;
GError *error;
error = NULL;
copy = g_dbus_message_copy (message, &error);
/<!-- -->* handle @error being is set *<!-- -->/
g_object_unref (message);
/<!-- -->* modify @copy *<!-- -->/
return copy;
}
]|
If the returned #GDBusMessage is different from @message and cannot
be sent on @connection (it could use features, such as file
descriptors, not compatible with @connection), then a warning is
logged to <emphasis>standard error</emphasis>. Applications can
check this ahead of time using g_dbus_message_to_blob() passing a
#GDBusCapabilityFlags value obtained from @connection.
A #GDBusMessage that will be freed with g_object_unref() or %NULL to drop the message. Passive filter functions can simply return the passed @message object.
A #GDBusConnection.
A locked #GDBusMessage that the filter function takes ownership of.
%TRUE if it is a message received from the other peer, %FALSE if it is a message to be sent to the other peer.
User data passed when adding the filter.
Message flags used in #GDBusMessage.
No flags set.
A reply is not expected.
The bus must not launch an owner for the destination name in response to this message.
Header fields used in #GDBusMessage.
Not a valid header field.
The object path.
The interface name.
The method or signal name.
The name of the error that occurred.
The serial number the message is a reply to.
The name the message is intended for.
Unique name of the sender of the message (filled in by the bus).
The signature of the message body.
The number of UNIX file descriptors that accompany the message.
Message types used in #GDBusMessage.
Message is of invalid type.
Method call.
Method reply.
Error reply.
Signal emission.
Information about a method on an D-Bus interface.
If @info is statically allocated does nothing. Otherwise increases
the reference count.
The same @info.
A #GDBusMethodInfo
If @info is statically allocated, does nothing. Otherwise decreases
the reference count of @info. When its reference count drops to 0,
the memory used is freed.
A #GDBusMethodInfo.
Instances of the #GDBusMethodInvocation class are used when
handling D-Bus method calls. It provides a way to asynchronously
return results and errors.
The normal way to obtain a #GDBusMethodInvocation object is to receive
it as an argument to the handle_method_call() function in a
#GDBusInterfaceVTable that was passed to g_dbus_connection_register_object().
Gets the #GDBusConnection the method was invoked on.
A #GDBusConnection. Do not free, it is owned by @invocation.
A #GDBusMethodInvocation.
Gets the name of the D-Bus interface the method was invoked on.
If this method call is a property Get, Set or GetAll call that has
been redirected to the method call handler then
"org.freedesktop.DBus.Properties" will be returned. See
#GDBusInterfaceVTable for more information.
A string. Do not free, it is owned by @invocation.
A #GDBusMethodInvocation.
Gets the #GDBusMessage for the method invocation. This is useful if
you need to use low-level protocol features, such as UNIX file
descriptor passing, that cannot be properly expressed in the
#GVariant API.
See <xref linkend="gdbus-server"/> and <xref
linkend="gdbus-unix-fd-client"/> for an example of how to use this
low-level API to send and receive UNIX file descriptors.
#GDBusMessage. Do not free, it is owned by @invocation.
A #GDBusMethodInvocation.
Gets information about the method call, if any.
If this method invocation is a property Get, Set or GetAll call that
has been redirected to the method call handler then %NULL will be
returned. See g_dbus_method_invocation_get_property_info() and
#GDBusInterfaceVTable for more information.
A #GDBusMethodInfo or %NULL. Do not free, it is owned by @invocation.
A #GDBusMethodInvocation.
Gets the name of the method that was invoked.
A string. Do not free, it is owned by @invocation.
A #GDBusMethodInvocation.
Gets the object path the method was invoked on.
A string. Do not free, it is owned by @invocation.
A #GDBusMethodInvocation.
Gets the parameters of the method invocation. If there are no input
parameters then this will return a GVariant with 0 children rather than NULL.
A #GVariant tuple. Do not unref this because it is owned by @invocation.
A #GDBusMethodInvocation.
Gets information about the property that this method call is for, if
any.
This will only be set in the case of an invocation in response to a
property Get or Set call that has been directed to the method call
handler for an object on account of its property_get() or
property_set() vtable pointers being unset.
See #GDBusInterfaceVTable for more information.
If the call was GetAll, %NULL will be returned.
a #GDBusPropertyInfo or %NULL
A #GDBusMethodInvocation
Gets the bus name that invoked the method.
A string. Do not free, it is owned by @invocation.
A #GDBusMethodInvocation.
Gets the @user_data #gpointer passed to g_dbus_connection_register_object().
A #gpointer.
A #GDBusMethodInvocation.
Finishes handling a D-Bus method call by returning an error.
This method will free @invocation, you cannot use it afterwards.
A #GDBusMethodInvocation.
A valid D-Bus error name.
A valid D-Bus error message.
Finishes handling a D-Bus method call by returning an error.
See g_dbus_error_encode_gerror() for details about what error name
will be returned on the wire. In a nutshell, if the given error is
registered using g_dbus_error_register_error() the name given
during registration is used. Otherwise, a name of the form
<literal>org.gtk.GDBus.UnmappedGError.Quark...</literal> is
used. This provides transparent mapping of #GError between
applications using GDBus.
If you are writing an application intended to be portable,
<emphasis>always</emphasis> register errors with g_dbus_error_register_error()
or use g_dbus_method_invocation_return_dbus_error().
This method will free @invocation, you cannot use it afterwards.
A #GDBusMethodInvocation.
A #GQuark for the #GError error domain.
The error code.
printf()-style format.
Like g_dbus_method_invocation_return_error() but without printf()-style formatting.
This method will free @invocation, you cannot use it afterwards.
A #GDBusMethodInvocation.
A #GQuark for the #GError error domain.
The error code.
The error message.
Like g_dbus_method_invocation_return_error() but intended for
language bindings.
This method will free @invocation, you cannot use it afterwards.
A #GDBusMethodInvocation.
A #GQuark for the #GError error domain.
The error code.
printf()-style format.
#va_list of parameters for @format.
Like g_dbus_method_invocation_return_error() but takes a #GError
instead of the error domain, error code and message.
This method will free @invocation, you cannot use it afterwards.
A #GDBusMethodInvocation.
A #GError.
Finishes handling a D-Bus method call by returning @parameters.
If the @parameters GVariant is floating, it is consumed.
It is an error if @parameters is not of the right format.
This method will free @invocation, you cannot use it afterwards.
A #GDBusMethodInvocation.
A #GVariant tuple with out parameters for the method or %NULL if not passing any parameters.
Like g_dbus_method_invocation_return_value() but also takes a #GUnixFDList.
This method is only available on UNIX.
This method will free @invocation, you cannot use it afterwards.
A #GDBusMethodInvocation.
A #GVariant tuple with out parameters for the method or %NULL if not passing any parameters.
A #GUnixFDList or %NULL.
Like g_dbus_method_invocation_return_gerror() but takes ownership
of @error so the caller does not need to free it.
This method will free @invocation, you cannot use it afterwards.
A #GDBusMethodInvocation.
A #GError.
Information about nodes in a remote object hierarchy.
Parses @xml_data and returns a #GDBusNodeInfo representing the data.
The introspection XML must contain exactly one top-level
<tag class="starttag">node</tag> element.
Note that this routine is using a
<link linkend="glib-Simple-XML-Subset-Parser.description">GMarkup</link>-based
parser that only accepts a subset of valid XML documents.
A #GDBusNodeInfo structure or %NULL if @error is set. Free with g_dbus_node_info_unref().
Valid D-Bus introspection XML.
Appends an XML representation of @info (and its children) to @string_builder.
This function is typically used for generating introspection XML documents at run-time for
handling the <literal>org.freedesktop.DBus.Introspectable.Introspect</literal> method.
A #GDBusNodeInfo.
Indentation level.
A #GString to to append XML data to.
Looks up information about an interface.
The cost of this function is O(n) in number of interfaces.
A #GDBusInterfaceInfo or %NULL if not found. Do not free, it is owned by @info.
A #GDBusNodeInfo.
A D-Bus interface name.
If @info is statically allocated does nothing. Otherwise increases
the reference count.
The same @info.
A #GDBusNodeInfo
If @info is statically allocated, does nothing. Otherwise decreases
the reference count of @info. When its reference count drops to 0,
the memory used is freed.
A #GDBusNodeInfo.
The #GDBusObject type is the base type for D-Bus objects on both
the service side (see #GDBusObjectSkeleton) and the client side
(see #GDBusObjectProxy). It is essentially just a container of
interfaces.
Gets the D-Bus interface with name @interface_name associated with
@object, if any.
%NULL if not found, otherwise a #GDBusInterface that must be freed with g_object_unref().
A D-Bus interface name.
Gets the D-Bus interfaces associated with @object.
A list of #GDBusInterface instances. The returned list must be freed by g_list_free() after each element has been freed with g_object_unref().
Gets the object path for @object.
A string owned by @object. Do not free.
Gets the D-Bus interface with name @interface_name associated with
@object, if any.
%NULL if not found, otherwise a #GDBusInterface that must be freed with g_object_unref().
A #GDBusObject.
A D-Bus interface name.
Gets the D-Bus interfaces associated with @object.
A list of #GDBusInterface instances. The returned list must be freed by g_list_free() after each element has been freed with g_object_unref().
A #GDBusObject.
Gets the object path for @object.
A string owned by @object. Do not free.
A #GDBusObject.
Emitted when @interface is added to @object.
The #GDBusInterface that was added.
Emitted when @interface is removed from @object.
The #GDBusInterface that was removed.
Base object type for D-Bus objects.
A string owned by @object. Do not free.
A list of #GDBusInterface instances. The returned list must be freed by g_list_free() after each element has been freed with g_object_unref().
%NULL if not found, otherwise a #GDBusInterface that must be freed with g_object_unref().
A D-Bus interface name.
The #GDBusObjectManager type is the base type for service- and
client-side implementations of the standardized <ulink
url="http://dbus.freedesktop.org/doc/dbus-specification.html#standard-interfaces-objectmanager">org.freedesktop.DBus.ObjectManager</ulink>
interface.
See #GDBusObjectManagerClient for the client-side implementation
and #GDBusObjectManagerServer for the service-side implementation.
Gets the interface proxy for @interface_name at @object_path, if
any.
A #GDBusInterface instance or %NULL. Free with g_object_unref().
Object path to lookup.
D-Bus interface name to lookup.
Gets the #GDBusObjectProxy at @object_path, if any.
A #GDBusObject or %NULL. Free with g_object_unref().
Object path to lookup.
Gets the object path that @manager is for.
A string owned by @manager. Do not free.
Gets all #GDBusObject objects known to @manager.
A list of #GDBusObject objects. The returned list should be freed with g_list_free() after each element has been freed with g_object_unref().
Gets the interface proxy for @interface_name at @object_path, if
any.
A #GDBusInterface instance or %NULL. Free with g_object_unref().
A #GDBusObjectManager.
Object path to lookup.
D-Bus interface name to lookup.
Gets the #GDBusObjectProxy at @object_path, if any.
A #GDBusObject or %NULL. Free with g_object_unref().
A #GDBusObjectManager.
Object path to lookup.
Gets the object path that @manager is for.
A string owned by @manager. Do not free.
A #GDBusObjectManager.
Gets all #GDBusObject objects known to @manager.
A list of #GDBusObject objects. The returned list should be freed with g_list_free() after each element has been freed with g_object_unref().
A #GDBusObjectManager.
Emitted when @interface is added to @object.
This signal exists purely as a convenience to avoid having to
connect signals to all objects managed by @manager.
The #GDBusObject on which an interface was added.
The #GDBusInterface that was added.
Emitted when @interface has been removed from @object.
This signal exists purely as a convenience to avoid having to
connect signals to all objects managed by @manager.
The #GDBusObject on which an interface was removed.
The #GDBusInterface that was removed.
Emitted when @object is added to @manager.
The #GDBusObject that was added.
Emitted when @object is removed from @manager.
The #GDBusObject that was removed.
#GDBusObjectManagerClient is used to create, monitor and delete object
proxies for remote objects exported by a #GDBusObjectManagerServer (or any
code implementing the <ulink
url="http://dbus.freedesktop.org/doc/dbus-specification.html#standard-interfaces-objectmanager">org.freedesktop.DBus.ObjectManager</ulink>
interface).
Once an instance of this type has been created, you can connect to
the #GDBusObjectManager::object-added and
#GDBusObjectManager::object-removed signals and inspect the
#GDBusObjectProxy objects returned by
g_dbus_object_manager_get_objects().
If the name for a #GDBusObjectManagerClient is not owned by anyone at
object construction time, the default behavior is to request the
message bus to launch an owner for the name. This behavior can be
disabled using the %G_DBUS_OBJECT_MANAGER_CLIENT_FLAGS_DO_NOT_AUTO_START
flag. It's also worth noting that this only works if the name of
interest is activatable in the first place. E.g. in some cases it
is not possible to launch an owner for the requested name. In this
case, #GDBusObjectManagerClient object construction still succeeds but
there will be no object proxies
(e.g. g_dbus_object_manager_get_objects() returns the empty list) and
the #GDBusObjectManagerClient:name-owner property is %NULL.
The owner of the requested name can come and go (for example
consider a system service being restarted) – #GDBusObjectManagerClient
handles this case too; simply connect to the #GObject::notify
signal to watch for changes on the #GDBusObjectManagerClient:name-owner
property. When the name owner vanishes, the behavior is that
#GDBusObjectManagerClient:name-owner is set to %NULL (this includes
emission of the #GObject::notify signal) and then
#GDBusObjectManager::object-removed signals are synthesized
for all currently existing object proxies. Since
#GDBusObjectManagerClient:name-owner is %NULL when this happens, you can
use this information to disambiguate a synthesized signal from a
genuine signal caused by object removal on the remote
#GDBusObjectManager. Similarly, when a new name owner appears,
#GDBusObjectManager::object-added signals are synthesized
while #GDBusObjectManagerClient:name-owner is still %NULL. Only when all
object proxies have been added, the #GDBusObjectManagerClient:name-owner
is set to the new name owner (this includes emission of the
#GObject::notify signal). Furthermore, you are guaranteed that
#GDBusObjectManagerClient:name-owner will alternate between a name owner
(e.g. <literal>:1.42</literal>) and %NULL even in the case where
the name of interest is atomically replaced
Ultimately, #GDBusObjectManagerClient is used to obtain #GDBusProxy
instances. All signals (including the
<literal>org.freedesktop.DBus.Properties::PropertiesChanged</literal>
signal) delivered to #GDBusProxy instances are guaranteed to
originate from the name owner. This guarantee along with the
behavior described above, means that certain race conditions
including the <emphasis><quote>half the proxy is from the old owner
and the other half is from the new owner</quote></emphasis> problem
cannot happen.
To avoid having the application connect to signals on the returned
#GDBusObjectProxy and #GDBusProxy objects, the
#GDBusObject::interface-added,
#GDBusObject::interface-removed,
#GDBusProxy::g-properties-changed and
#GDBusProxy::g-signal signals
are also emitted on the #GDBusObjectManagerClient instance managing these
objects. The signals emitted are
#GDBusObjectManager::interface-added,
#GDBusObjectManager::interface-removed,
#GDBusObjectManagerClient::interface-proxy-properties-changed and
#GDBusObjectManagerClient::interface-proxy-signal.
Note that all callbacks and signals are emitted in the
<link linkend="g-main-context-push-thread-default">thread-default main loop</link>
that the #GDBusObjectManagerClient object was constructed
in. Additionally, the #GDBusObjectProxy and #GDBusProxy objects
originating from the #GDBusObjectManagerClient object will be created in
the same context and, consequently, will deliver signals in the
same main loop.
Finishes an operation started with g_dbus_object_manager_client_new().
A #GDBusObjectManagerClient object or %NULL if @error is set. Free with g_object_unref().
A #GAsyncResult obtained from the #GAsyncReadyCallback passed to g_dbus_object_manager_client_new().
Finishes an operation started with g_dbus_object_manager_client_new_for_bus().
A #GDBusObjectManagerClient object or %NULL if @error is set. Free with g_object_unref().
A #GAsyncResult obtained from the #GAsyncReadyCallback passed to g_dbus_object_manager_client_new_for_bus().
Like g_dbus_object_manager_client_new_sync() but takes a #GBusType instead
of a #GDBusConnection.
This is a synchronous failable constructor - the calling thread is
blocked until a reply is received. See g_dbus_object_manager_client_new_for_bus()
for the asynchronous version.
A #GDBusObjectManagerClient object or %NULL if @error is set. Free with g_object_unref().
A #GBusType.
Zero or more flags from the #GDBusObjectManagerClientFlags enumeration.
The owner of the control object (unique or well-known name).
The object path of the control object.
A #GDBusProxyTypeFunc function or %NULL to always construct #GDBusProxy proxies.
User data to pass to @get_proxy_type_func.
Free function for @get_proxy_type_user_data or %NULL.
A #GCancellable or %NULL
Creates a new #GDBusObjectManagerClient object.
This is a synchronous failable constructor - the calling thread is
blocked until a reply is received. See g_dbus_object_manager_client_new()
for the asynchronous version.
A #GDBusObjectManagerClient object or %NULL if @error is set. Free with g_object_unref().
A #GDBusConnection.
Zero or more flags from the #GDBusObjectManagerClientFlags enumeration.
The owner of the control object (unique or well-known name), or %NULL when not using a message bus connection.
The object path of the control object.
A #GDBusProxyTypeFunc function or %NULL to always construct #GDBusProxy proxies.
User data to pass to @get_proxy_type_func.
Free function for @get_proxy_type_user_data or %NULL.
A #GCancellable or %NULL
Asynchronously creates a new #GDBusObjectManagerClient object.
This is an asynchronous failable constructor. When the result is
ready, @callback will be invoked in the
<link linkend="g-main-context-push-thread-default">thread-default main loop</link>
of the thread you are calling this method from. You can
then call g_dbus_object_manager_client_new_finish() to get the result. See
g_dbus_object_manager_client_new_sync() for the synchronous version.
A #GDBusConnection.
Zero or more flags from the #GDBusObjectManagerClientFlags enumeration.
The owner of the control object (unique or well-known name).
The object path of the control object.
A #GDBusProxyTypeFunc function or %NULL to always construct #GDBusProxy proxies.
User data to pass to @get_proxy_type_func.
Free function for @get_proxy_type_user_data or %NULL.
A #GCancellable or %NULL
A #GAsyncReadyCallback to call when the request is satisfied.
The data to pass to @callback.
Like g_dbus_object_manager_client_new() but takes a #GBusType instead of a
#GDBusConnection.
This is an asynchronous failable constructor. When the result is
ready, @callback will be invoked in the
<link linkend="g-main-context-push-thread-default">thread-default main loop</link>
of the thread you are calling this method from. You can
then call g_dbus_object_manager_client_new_for_bus_finish() to get the result. See
g_dbus_object_manager_client_new_for_bus_sync() for the synchronous version.
A #GBusType.
Zero or more flags from the #GDBusObjectManagerClientFlags enumeration.
The owner of the control object (unique or well-known name).
The object path of the control object.
A #GDBusProxyTypeFunc function or %NULL to always construct #GDBusProxy proxies.
User data to pass to @get_proxy_type_func.
Free function for @get_proxy_type_user_data or %NULL.
A #GCancellable or %NULL
A #GAsyncReadyCallback to call when the request is satisfied.
The data to pass to @callback.
Gets the #GDBusConnection used by @manager.
A #GDBusConnection object. Do not free, the object belongs to @manager.
A #GDBusObjectManagerClient
Gets the flags that @manager was constructed with.
Zero of more flags from the #GDBusObjectManagerClientFlags enumeration.
A #GDBusObjectManagerClient
Gets the name that @manager is for, or %NULL if not a message bus
connection.
A unique or well-known name. Do not free, the string belongs to @manager.
A #GDBusObjectManagerClient
The unique name that owns the name that @manager is for or %NULL if
no-one currently owns that name. You can connect to the
#GObject::notify signal to track changes to the
#GDBusObjectManagerClient:name-owner property.
The name owner or %NULL if no name owner exists. Free with g_free().
A #GDBusObjectManagerClient.
If this property is not %G_BUS_TYPE_NONE, then
#GDBusObjectManagerClient:connection must be %NULL and will be set to the
#GDBusConnection obtained by calling g_bus_get() with the value
of this property.
The #GDBusConnection to use.
Flags from the #GDBusObjectManagerClientFlags enumeration.
A #GDestroyNotify for the #gpointer user_data in #GDBusObjectManagerClient:get-proxy-type-user-data.
The #GDBusProxyTypeFunc to use when determining what #GType to
use for interface proxies or %NULL.
The #gpointer user_data to pass to #GDBusObjectManagerClient:get-proxy-type-func.
The well-known name or unique name that the manager is for.
The unique name that owns #GDBusObjectManagerClient:name or %NULL if
no-one is currently owning the name. Connect to the
#GObject::notify signal to track changes to this property.
The object path the manager is for.
Emitted when one or more D-Bus properties on proxy changes. The
local cache has already been updated when this signal fires. Note
that both @changed_properties and @invalidated_properties are
guaranteed to never be %NULL (either may be empty though).
This signal exists purely as a convenience to avoid having to
connect signals to all interface proxies managed by @manager.
This signal is emitted in the
<link linkend="g-main-context-push-thread-default">thread-default main loop</link>
that @manager was constructed in.
The #GDBusObjectProxy on which an interface has properties that are changing.
The #GDBusProxy that has properties that are changing.
A #GVariant containing the properties that changed.
A %NULL terminated array of properties that was invalidated.
Emitted when a D-Bus signal is received on @interface_proxy.
This signal exists purely as a convenience to avoid having to
connect signals to all interface proxies managed by @manager.
This signal is emitted in the
<link linkend="g-main-context-push-thread-default">thread-default main loop</link>
that @manager was constructed in.
The #GDBusObjectProxy on which an interface is emitting a D-Bus signal.
The #GDBusProxy that is emitting a D-Bus signal.
The sender of the signal or NULL if the connection is not a bus connection.
The signal name.
A #GVariant tuple with parameters for the signal.
Class structure for #GDBusObjectManagerClient.
Flags used when constructing a #GDBusObjectManagerClient.
No flags set.
If not set and the manager is for a well-known name, then request the bus to launch an owner for the name if no-one owns the name. This flag can only be used in managers for well-known names.
Base type for D-Bus object managers.
A string owned by @manager. Do not free.
A list of #GDBusObject objects. The returned list should be freed with g_list_free() after each element has been freed with g_object_unref().
A #GDBusObject or %NULL. Free with g_object_unref().
Object path to lookup.
A #GDBusInterface instance or %NULL. Free with g_object_unref().
Object path to lookup.
D-Bus interface name to lookup.
#GDBusObjectManagerServer is used to export #GDBusObject instances using
the standardized <ulink
url="http://dbus.freedesktop.org/doc/dbus-specification.html#standard-interfaces-objectmanager">org.freedesktop.DBus.ObjectManager</ulink>
interface. For example, remote D-Bus clients can get all objects
and properties in a single call. Additionally, any change in the
object hierarchy is broadcast using signals. This means that D-Bus
clients can keep caches up to date by only listening to D-Bus
signals.
See #GDBusObjectManagerClient for the client-side code that is
intended to be used with #GDBusObjectManagerServer or any D-Bus
object implementing the org.freedesktop.DBus.ObjectManager
interface.
Creates a new #GDBusObjectManagerServer object.
The returned server isn't yet exported on any connection. To do so,
use g_dbus_object_manager_server_set_connection(). Normally you
want to export all of your objects before doing so to avoid <ulink
url="http://dbus.freedesktop.org/doc/dbus-specification.html#standard-interfaces-objectmanager">InterfacesAdded</ulink>
signals being emitted.
A #GDBusObjectManagerServer object. Free with g_object_unref().
The object path to export the manager object at.
Exports @object on @manager.
If there is already a #GDBusObject exported at the object path,
then the old object is removed.
The object path for @object must be in the hierarchy rooted by the
object path for @manager.
Note that @manager will take a reference on @object for as long as
it is exported.
A #GDBusObjectManagerServer.
A #GDBusObjectSkeleton.
Like g_dbus_object_manager_server_export() but appends a string of
the form <literal>_N</literal> (with N being a natural number) to
@object<!-- -->'s object path if an object with the given path
already exists. As such, the #GDBusObjectProxy:g-object-path property
of @object may be modified.
A #GDBusObjectManagerServer.
An object.
Gets the #GDBusConnection used by @manager.
A #GDBusConnection object or %NULL if @manager isn't exported on a connection. The returned object should be freed with g_object_unref().
A #GDBusObjectManagerServer
Returns whether @object is currently exported on @manager.
%TRUE if @object is exported
A #GDBusObjectManagerServer.
An object.
Exports all objects managed by @manager on @connection. If
@connection is %NULL, stops exporting objects.
A #GDBusObjectManagerServer.
A #GDBusConnection or %NULL.
If @manager has an object at @path, removes the object. Otherwise
does nothing.
Note that @object_path must be in the hierarchy rooted by the
object path for @manager.
%TRUE if object at @object_path was removed, %FALSE otherwise.
A #GDBusObjectManagerServer.
An object path.
The #GDBusConnection to export objects on.
The object path to register the manager object at.
Class structure for #GDBusObjectManagerServer.
A #GDBusObjectProxy is an object used to represent a remote object
with one or more D-Bus interfaces. Normally, you don't instantiate
a #GDBusObjectProxy yourself - typically #GDBusObjectManagerClient
is used to obtain it.
Creates a new #GDBusObjectProxy for the given connection and
object path.
a new #GDBusObjectProxy
a #GDBusConnection
the object path
Gets the connection that @proxy is for.
A #GDBusConnection. Do not free, the object is owned by @proxy.
a #GDBusObjectProxy
The connection of the proxy.
The object path of the proxy.
Class structure for #GDBusObjectProxy.
A #GDBusObjectSkeleton instance is essentially a group of D-Bus
interfaces. The set of exported interfaces on the object may be
dynamic and change at runtime.
This type is intended to be used with #GDBusObjectManager.
Creates a new #GDBusObjectSkeleton.
A #GDBusObjectSkeleton. Free with g_object_unref().
An object path.
Adds @interface_ to @object.
If @object already contains a #GDBusInterfaceSkeleton with the same
interface name, it is removed before @interface_ is added.
Note that @object takes its own reference on @interface_ and holds
it until removed.
A #GDBusObjectSkeleton.
A #GDBusInterfaceSkeleton.
This method simply calls g_dbus_interface_skeleton_flush() on all
interfaces belonging to @object. See that method for when flushing
is useful.
A #GDBusObjectSkeleton.
Removes @interface_ from @object.
A #GDBusObjectSkeleton.
A #GDBusInterfaceSkeleton.
Removes the #GDBusInterface with @interface_name from @object.
If no D-Bus interface of the given interface exists, this function
does nothing.
A #GDBusObjectSkeleton.
A D-Bus interface name.
Sets the object path for @object.
A #GDBusObjectSkeleton.
A valid D-Bus object path.
The object path where the object is exported.
Emitted when a method is invoked by a remote caller and used to
determine if the method call is authorized.
This signal is like #GDBusInterfaceSkeleton<!-- -->'s
#GDBusInterfaceSkeleton::g-authorize-method signal, except that it is
for the enclosing object.
The default class handler just returns %TRUE.
%TRUE if the call is authorized, %FALSE otherwise.
The #GDBusInterfaceSkeleton that @invocation is for.
A #GDBusMethodInvocation.
Class structure for #GDBusObjectSkeleton.
Information about a D-Bus property on a D-Bus interface.
If @info is statically allocated does nothing. Otherwise increases
the reference count.
The same @info.
A #GDBusPropertyInfo
If @info is statically allocated, does nothing. Otherwise decreases
the reference count of @info. When its reference count drops to 0,
the memory used is freed.
A #GDBusPropertyInfo.
Flags describing the access control of a D-Bus property.
No flags set.
Property is readable.
Property is writable.
#GDBusProxy is a base class used for proxies to access a D-Bus
interface on a remote object. A #GDBusProxy can be constructed for
both well-known and unique names.
By default, #GDBusProxy will cache all properties (and listen to
changes) of the remote object, and proxy all signals that gets
emitted. This behaviour can be changed by passing suitable
#GDBusProxyFlags when the proxy is created. If the proxy is for a
well-known name, the property cache is flushed when the name owner
vanishes and reloaded when a name owner appears.
If a #GDBusProxy is used for a well-known name, the owner of the
name is tracked and can be read from
#GDBusProxy:g-name-owner. Connect to the #GObject::notify signal to
get notified of changes. Additionally, only signals and property
changes emitted from the current name owner are considered and
calls are always sent to the current name owner. This avoids a
number of race conditions when the name is lost by one owner and
claimed by another. However, if no name owner currently exists,
then calls will be sent to the well-known name which may result in
the message bus launching an owner (unless
%G_DBUS_PROXY_FLAGS_DO_NOT_AUTO_START is set).
The generic #GDBusProxy::g-properties-changed and
#GDBusProxy::g-signal signals are not very convenient to work
with. Therefore, the recommended way of working with proxies is to
subclass #GDBusProxy, and have more natural properties and signals
in your derived class. See <xref linkend="gdbus-example-gdbus-codegen"/>
for how this can easily be done using the
<command><link linkend="gdbus-codegen">gdbus-codegen</link></command>
tool.
A #GDBusProxy instance can be used from multiple threads but note
that all signals (e.g. #GDBusProxy::g-signal, #GDBusProxy::g-properties-changed
and #GObject::notify) are emitted in the
<link linkend="g-main-context-push-thread-default">thread-default main loop</link>
of the thread where the instance was constructed.
<example id="gdbus-wellknown-proxy"><title>GDBusProxy for a well-known-name</title><programlisting><xi:include xmlns:xi="http://www.w3.org/2001/XInclude" parse="text" href="../../../../gio/tests/gdbus-example-watch-proxy.c"><xi:fallback>FIXME: MISSING XINCLUDE CONTENT</xi:fallback></xi:include></programlisting></example>
Finishes creating a #GDBusProxy.
A #GDBusProxy or %NULL if @error is set. Free with g_object_unref().
A #GAsyncResult obtained from the #GAsyncReadyCallback function passed to g_dbus_proxy_new().
Finishes creating a #GDBusProxy.
A #GDBusProxy or %NULL if @error is set. Free with g_object_unref().
A #GAsyncResult obtained from the #GAsyncReadyCallback function passed to g_dbus_proxy_new_for_bus().
Like g_dbus_proxy_new_sync() but takes a #GBusType instead of a #GDBusConnection.
See <xref linkend="gdbus-wellknown-proxy"/> for an example of how #GDBusProxy can be used.
A #GDBusProxy or %NULL if error is set. Free with g_object_unref().
A #GBusType.
Flags used when constructing the proxy.
A #GDBusInterfaceInfo specifying the minimal interface that @proxy conforms to or %NULL.
A bus name (well-known or unique).
An object path.
A D-Bus interface name.
A #GCancellable or %NULL.
Creates a proxy for accessing @interface_name on the remote object
at @object_path owned by @name at @connection and synchronously
loads D-Bus properties unless the
%G_DBUS_PROXY_FLAGS_DO_NOT_LOAD_PROPERTIES flag is used.
If the %G_DBUS_PROXY_FLAGS_DO_NOT_CONNECT_SIGNALS flag is not set, also sets up
match rules for signals. Connect to the #GDBusProxy::g-signal signal
to handle signals from the remote object.
If @name is a well-known name and the
%G_DBUS_PROXY_FLAGS_DO_NOT_AUTO_START flag isn't set and no name
owner currently exists, the message bus will be requested to launch
a name owner for the name.
This is a synchronous failable constructor. See g_dbus_proxy_new()
and g_dbus_proxy_new_finish() for the asynchronous version.
See <xref linkend="gdbus-wellknown-proxy"/> for an example of how #GDBusProxy can be used.
A #GDBusProxy or %NULL if error is set. Free with g_object_unref().
A #GDBusConnection.
Flags used when constructing the proxy.
A #GDBusInterfaceInfo specifying the minimal interface that @proxy conforms to or %NULL.
A bus name (well-known or unique) or %NULL if @connection is not a message bus connection.
An object path.
A D-Bus interface name.
A #GCancellable or %NULL.
Creates a proxy for accessing @interface_name on the remote object
at @object_path owned by @name at @connection and asynchronously
loads D-Bus properties unless the
%G_DBUS_PROXY_FLAGS_DO_NOT_LOAD_PROPERTIES flag is used. Connect to
the #GDBusProxy::g-properties-changed signal to get notified about
property changes.
If the %G_DBUS_PROXY_FLAGS_DO_NOT_CONNECT_SIGNALS flag is not set, also sets up
match rules for signals. Connect to the #GDBusProxy::g-signal signal
to handle signals from the remote object.
If @name is a well-known name and the
%G_DBUS_PROXY_FLAGS_DO_NOT_AUTO_START flag isn't set and no name
owner currently exists, the message bus will be requested to launch
a name owner for the name.
This is a failable asynchronous constructor - when the proxy is
ready, @callback will be invoked and you can use
g_dbus_proxy_new_finish() to get the result.
See g_dbus_proxy_new_sync() and for a synchronous version of this constructor.
See <xref linkend="gdbus-wellknown-proxy"/> for an example of how #GDBusProxy can be used.
A #GDBusConnection.
Flags used when constructing the proxy.
A #GDBusInterfaceInfo specifying the minimal interface that @proxy conforms to or %NULL.
A bus name (well-known or unique) or %NULL if @connection is not a message bus connection.
An object path.
A D-Bus interface name.
A #GCancellable or %NULL.
Callback function to invoke when the proxy is ready.
User data to pass to @callback.
Like g_dbus_proxy_new() but takes a #GBusType instead of a #GDBusConnection.
See <xref linkend="gdbus-wellknown-proxy"/> for an example of how #GDBusProxy can be used.
A #GBusType.
Flags used when constructing the proxy.
A #GDBusInterfaceInfo specifying the minimal interface that @proxy conforms to or %NULL.
A bus name (well-known or unique).
An object path.
A D-Bus interface name.
A #GCancellable or %NULL.
Callback function to invoke when the proxy is ready.
User data to pass to @callback.
Asynchronously invokes the @method_name method on @proxy.
If @method_name contains any dots, then @name is split into interface and
method name parts. This allows using @proxy for invoking methods on
other interfaces.
If the #GDBusConnection associated with @proxy is closed then
the operation will fail with %G_IO_ERROR_CLOSED. If
@cancellable is canceled, the operation will fail with
%G_IO_ERROR_CANCELLED. If @parameters contains a value not
compatible with the D-Bus protocol, the operation fails with
%G_IO_ERROR_INVALID_ARGUMENT.
If the @parameters #GVariant is floating, it is consumed. This allows
convenient 'inline' use of g_variant_new(), e.g.:
|[
g_dbus_proxy_call (proxy,
"TwoStrings",
g_variant_new ("(ss)",
"Thing One",
"Thing Two"),
G_DBUS_CALL_FLAGS_NONE,
-1,
NULL,
(GAsyncReadyCallback) two_strings_done,
&data);
]|
If @proxy has an expected interface (see
#GDBusProxy:g-interface-info) and @method_name is referenced by it,
then the return value is checked against the return type.
This is an asynchronous method. When the operation is finished,
@callback will be invoked in the
<link linkend="g-main-context-push-thread-default">thread-default main loop</link>
of the thread you are calling this method from.
You can then call g_dbus_proxy_call_finish() to get the result of
the operation. See g_dbus_proxy_call_sync() for the synchronous
version of this method.
If @callback is %NULL then the D-Bus method call message will be sent with
the %G_DBUS_MESSAGE_FLAGS_NO_REPLY_EXPECTED flag set.
A #GDBusProxy.
Name of method to invoke.
A #GVariant tuple with parameters for the signal or %NULL if not passing parameters.
Flags from the #GDBusCallFlags enumeration.
The timeout in milliseconds (with %G_MAXINT meaning "infinite") or -1 to use the proxy default timeout.
A #GCancellable or %NULL.
A #GAsyncReadyCallback to call when the request is satisfied or %NULL if you don't care about the result of the method invocation.
The data to pass to @callback.
Finishes an operation started with g_dbus_proxy_call().
%NULL if @error is set. Otherwise a #GVariant tuple with return values. Free with g_variant_unref().
A #GDBusProxy.
A #GAsyncResult obtained from the #GAsyncReadyCallback passed to g_dbus_proxy_call().
Synchronously invokes the @method_name method on @proxy.
If @method_name contains any dots, then @name is split into interface and
method name parts. This allows using @proxy for invoking methods on
other interfaces.
If the #GDBusConnection associated with @proxy is disconnected then
the operation will fail with %G_IO_ERROR_CLOSED. If
@cancellable is canceled, the operation will fail with
%G_IO_ERROR_CANCELLED. If @parameters contains a value not
compatible with the D-Bus protocol, the operation fails with
%G_IO_ERROR_INVALID_ARGUMENT.
If the @parameters #GVariant is floating, it is consumed. This allows
convenient 'inline' use of g_variant_new(), e.g.:
|[
g_dbus_proxy_call_sync (proxy,
"TwoStrings",
g_variant_new ("(ss)",
"Thing One",
"Thing Two"),
G_DBUS_CALL_FLAGS_NONE,
-1,
NULL,
&error);
]|
The calling thread is blocked until a reply is received. See
g_dbus_proxy_call() for the asynchronous version of this
method.
If @proxy has an expected interface (see
#GDBusProxy:g-interface-info) and @method_name is referenced by it,
then the return value is checked against the return type.
%NULL if @error is set. Otherwise a #GVariant tuple with return values. Free with g_variant_unref().
A #GDBusProxy.
Name of method to invoke.
A #GVariant tuple with parameters for the signal or %NULL if not passing parameters.
Flags from the #GDBusCallFlags enumeration.
The timeout in milliseconds (with %G_MAXINT meaning "infinite") or -1 to use the proxy default timeout.
A #GCancellable or %NULL.
Like g_dbus_proxy_call() but also takes a #GUnixFDList object.
This method is only available on UNIX.
A #GDBusProxy.
Name of method to invoke.
A #GVariant tuple with parameters for the signal or %NULL if not passing parameters.
Flags from the #GDBusCallFlags enumeration.
The timeout in milliseconds (with %G_MAXINT meaning "infinite") or -1 to use the proxy default timeout.
A #GUnixFDList or %NULL.
A #GCancellable or %NULL.
A #GAsyncReadyCallback to call when the request is satisfied or %NULL if you don't care about the result of the method invocation.
The data to pass to @callback.
Finishes an operation started with g_dbus_proxy_call_with_unix_fd_list().
%NULL if @error is set. Otherwise a #GVariant tuple with return values. Free with g_variant_unref().
A #GDBusProxy.
Return location for a #GUnixFDList or %NULL.
A #GAsyncResult obtained from the #GAsyncReadyCallback passed to g_dbus_proxy_call_with_unix_fd_list().
Like g_dbus_proxy_call_sync() but also takes and returns #GUnixFDList objects.
This method is only available on UNIX.
%NULL if @error is set. Otherwise a #GVariant tuple with return values. Free with g_variant_unref().
A #GDBusProxy.
Name of method to invoke.
A #GVariant tuple with parameters for the signal or %NULL if not passing parameters.
Flags from the #GDBusCallFlags enumeration.
The timeout in milliseconds (with %G_MAXINT meaning "infinite") or -1 to use the proxy default timeout.
A #GUnixFDList or %NULL.
Return location for a #GUnixFDList or %NULL.
A #GCancellable or %NULL.
Looks up the value for a property from the cache. This call does no
blocking IO.
If @proxy has an expected interface (see
#GDBusProxy:g-interface-info) and @property_name is referenced by
it, then @value is checked against the type of the property.
A reference to the #GVariant instance that holds the value for @property_name or %NULL if the value is not in the cache. The returned reference must be freed with g_variant_unref().
A #GDBusProxy.
Property name.
Gets the names of all cached properties on @proxy.
A %NULL-terminated array of strings or %NULL if @proxy has no cached properties. Free the returned array with g_strfreev().
A #GDBusProxy.
Gets the connection @proxy is for.
A #GDBusConnection owned by @proxy. Do not free.
A #GDBusProxy.
Gets the timeout to use if -1 (specifying default timeout) is
passed as @timeout_msec in the g_dbus_proxy_call() and
g_dbus_proxy_call_sync() functions.
See the #GDBusProxy:g-default-timeout property for more details.
Timeout to use for @proxy.
A #GDBusProxy.
Gets the flags that @proxy was constructed with.
Flags from the #GDBusProxyFlags enumeration.
A #GDBusProxy.
Returns the #GDBusInterfaceInfo, if any, specifying the interface
that @proxy conforms to. See the #GDBusProxy:g-interface-info
property for more details.
A #GDBusInterfaceInfo or %NULL. Do not unref the returned object, it is owned by @proxy.
A #GDBusProxy
Gets the D-Bus interface name @proxy is for.
A string owned by @proxy. Do not free.
A #GDBusProxy.
Gets the name that @proxy was constructed for.
A string owned by @proxy. Do not free.
A #GDBusProxy.
The unique name that owns the name that @proxy is for or %NULL if
no-one currently owns that name. You may connect to the
#GObject::notify signal to track changes to the
#GDBusProxy:g-name-owner property.
The name owner or %NULL if no name owner exists. Free with g_free().
A #GDBusProxy.
Gets the object path @proxy is for.
A string owned by @proxy. Do not free.
A #GDBusProxy.
If @value is not %NULL, sets the cached value for the property with
name @property_name to the value in @value.
If @value is %NULL, then the cached value is removed from the
property cache.
If @proxy has an expected interface (see
#GDBusProxy:g-interface-info) and @property_name is referenced by
it, then @value is checked against the type of the property.
If the @value #GVariant is floating, it is consumed. This allows
convenient 'inline' use of g_variant_new(), e.g.
|[
g_dbus_proxy_set_cached_property (proxy,
"SomeProperty",
g_variant_new ("(si)",
"A String",
42));
]|
Normally you will not need to use this method since @proxy is
tracking changes using the
<literal>org.freedesktop.DBus.Properties.PropertiesChanged</literal>
D-Bus signal. However, for performance reasons an object may decide
to not use this signal for some properties and instead use a
proprietary out-of-band mechanism to transmit changes.
As a concrete example, consider an object with a property
<literal>ChatroomParticipants</literal> which is an array of
strings. Instead of transmitting the same (long) array every time
the property changes, it is more efficient to only transmit the
delta using e.g. signals <literal>ChatroomParticipantJoined(String
name)</literal> and <literal>ChatroomParticipantParted(String
name)</literal>.
A #GDBusProxy
Property name.
Value for the property or %NULL to remove it from the cache.
Sets the timeout to use if -1 (specifying default timeout) is
passed as @timeout_msec in the g_dbus_proxy_call() and
g_dbus_proxy_call_sync() functions.
See the #GDBusProxy:g-default-timeout property for more details.
A #GDBusProxy.
Timeout in milliseconds.
Ensure that interactions with @proxy conform to the given
interface. See the #GDBusProxy:g-interface-info property for more
details.
A #GDBusProxy
Minimum interface this proxy conforms to or %NULL to unset.
If this property is not %G_BUS_TYPE_NONE, then
#GDBusProxy:g-connection must be %NULL and will be set to the
#GDBusConnection obtained by calling g_bus_get() with the value
of this property.
The #GDBusConnection the proxy is for.
The timeout to use if -1 (specifying default timeout) is passed
as @timeout_msec in the g_dbus_proxy_call() and
g_dbus_proxy_call_sync() functions.
This allows applications to set a proxy-wide timeout for all
remote method invocations on the proxy. If this property is -1,
the default timeout (typically 25 seconds) is used. If set to
%G_MAXINT, then no timeout is used.
Flags from the #GDBusProxyFlags enumeration.
Ensure that interactions with this proxy conform to the given
interface. This is mainly to ensure that malformed data received
from the other peer is ignored. The given #GDBusInterfaceInfo is
said to be the <emphasis>expected interface</emphasis>.
The checks performed are:
<itemizedlist>
<listitem><para>
When completing a method call, if the type signature of
the reply message isn't what's expected, the reply is
discarded and the #GError is set to %G_IO_ERROR_INVALID_ARGUMENT.
</para></listitem>
<listitem><para>
Received signals that have a type signature mismatch are dropped and
a warning is logged via g_warning().
</para></listitem>
<listitem><para>
Properties received via the initial <literal>GetAll()</literal> call
or via the <literal>::PropertiesChanged</literal> signal (on the
<ulink url="http://dbus.freedesktop.org/doc/dbus-specification.html#standard-interfaces-properties">org.freedesktop.DBus.Properties</ulink> interface) or
set using g_dbus_proxy_set_cached_property() with a type signature
mismatch are ignored and a warning is logged via g_warning().
</para></listitem>
</itemizedlist>
Note that these checks are never done on methods, signals and
properties that are not referenced in the given
#GDBusInterfaceInfo, since extending a D-Bus interface on the
service-side is not considered an ABI break.
The D-Bus interface name the proxy is for.
The well-known or unique name that the proxy is for.
The unique name that owns #GDBusProxy:g-name or %NULL if no-one
currently owns that name. You may connect to #GObject::notify signal to
track changes to this property.
The object path the proxy is for.
Emitted when one or more D-Bus properties on @proxy changes. The
local cache has already been updated when this signal fires. Note
that both @changed_properties and @invalidated_properties are
guaranteed to never be %NULL (either may be empty though).
If the proxy has the flag
%G_DBUS_PROXY_FLAGS_GET_INVALIDATED_PROPERTIES set, then
@invalidated_properties will always be empty.
This signal corresponds to the
<literal>PropertiesChanged</literal> D-Bus signal on the
<literal>org.freedesktop.DBus.Properties</literal> interface.
A #GVariant containing the properties that changed
A %NULL terminated array of properties that was invalidated
Emitted when a signal from the remote object and interface that @proxy is for, has been received.
The sender of the signal or %NULL if the connection is not a bus connection.
The name of the signal.
A #GVariant tuple with parameters for the signal.
Class structure for #GDBusProxy.
Flags used when constructing an instance of a #GDBusProxy derived class.
No flags set.
Don't load properties.
Don't connect to signals on the remote object.
If not set and the proxy if for a well-known name, then request the bus to launch an owner for the name if no-one owns the name. This flag can only be used in proxies for well-known names.
If set, the property value for any <emphasis>invalidated property</emphasis> will be (asynchronously) retrieved upon receiving the <ulink url="http://dbus.freedesktop.org/doc/dbus-specification.html#standard-interfaces-properties">PropertiesChanged</ulink> D-Bus signal and the property will not cause emission of the #GDBusProxy::g-properties-changed signal. When the value is received the #GDBusProxy::g-properties-changed signal is emitted for the property along with the retrieved value. Since 2.32.
Function signature for a function used to determine the #GType to
use for an interface proxy (if @interface_name is not %NULL) or
object proxy (if @interface_name is %NULL).
This function is called in the
<link linkend="g-main-context-push-thread-default">thread-default main loop</link>
that @manager was constructed in.
A #GType to use for the remote object. The returned type must be a #GDBusProxy<!-- -->- or #GDBusObjectProxy<!-- -->-derived type.
A #GDBusObjectManagerClient.
The object path of the remote object.
The interface name of the remote object or %NULL if a #GDBusObjectProxy #GType is requested.
User data.
Flags used when sending #GDBusMessage<!-- -->s on a #GDBusConnection.
No flags set.
Do not automatically assign a serial number from the #GDBusConnection object when sending a message.
#GDBusServer is a helper for listening to and accepting D-Bus
connections. This can be used to create a new D-Bus server, allowing two
peers to use the D-Bus protocol for their own specialized communication.
A server instance provided in this way will not perform message routing or
implement the org.freedesktop.DBus interface.
To just export an object on a well-known name on a message bus, such as the
session or system bus, you should instead use g_bus_own_name().
<example id="gdbus-peer-to-peer"><title>D-Bus peer-to-peer example</title><programlisting><xi:include xmlns:xi="http://www.w3.org/2001/XInclude" parse="text" href="../../../../gio/tests/gdbus-example-peer.c"><xi:fallback>FIXME: MISSING XINCLUDE CONTENT</xi:fallback></xi:include></programlisting></example>
Creates a new D-Bus server that listens on the first address in
@address that works.
Once constructed, you can use g_dbus_server_get_client_address() to
get a D-Bus address string that clients can use to connect.
Connect to the #GDBusServer::new-connection signal to handle
incoming connections.
The returned #GDBusServer isn't active - you have to start it with
g_dbus_server_start().
See <xref linkend="gdbus-peer-to-peer"/> for how #GDBusServer can
be used.
This is a synchronous failable constructor. See
g_dbus_server_new() for the asynchronous version.
A #GDBusServer or %NULL if @error is set. Free with g_object_unref().
A D-Bus address.
Flags from the #GDBusServerFlags enumeration.
A D-Bus GUID.
A #GDBusAuthObserver or %NULL.
A #GCancellable or %NULL.
Gets a D-Bus address string that can be used by clients to connect
to @server.
A D-Bus address string. Do not free, the string is owned by @server.
A #GDBusServer.
Gets the flags for @server.
A set of flags from the #GDBusServerFlags enumeration.
A #GDBusServer.
Gets the GUID for @server.
A D-Bus GUID. Do not free this string, it is owned by @server.
A #GDBusServer.
Gets whether @server is active.
%TRUE if server is active, %FALSE otherwise.
A #GDBusServer.
Starts @server.
A #GDBusServer.
Stops @server.
A #GDBusServer.
Whether the server is currently active.
The D-Bus address to listen on.
A #GDBusAuthObserver object to assist in the authentication process or %NULL.
The D-Bus address that clients can use.
Flags from the #GDBusServerFlags enumeration.
The guid of the server.
Emitted when a new authenticated connection has been made. Use
g_dbus_connection_get_peer_credentials() to figure out what
identity (if any), was authenticated.
If you want to accept the connection, take a reference to the
@connection object and return %TRUE. When you are done with the
connection call g_dbus_connection_close() and give up your
reference. Note that the other peer may disconnect at any time -
a typical thing to do when accepting a connection is to listen to
the #GDBusConnection::closed signal.
If #GDBusServer:flags contains %G_DBUS_SERVER_FLAGS_RUN_IN_THREAD
then the signal is emitted in a new thread dedicated to the
connection. Otherwise the signal is emitted in the <link
linkend="g-main-context-push-thread-default">thread-default main
loop</link> of the thread that @server was constructed in.
You are guaranteed that signal handlers for this signal runs
before incoming messages on @connection are processed. This means
that it's suitable to call g_dbus_connection_register_object() or
similar from the signal handler.
%TRUE to claim @connection, %FALSE to let other handlers run.
A #GDBusConnection for the new connection.
Flags used when creating a #GDBusServer.
No flags set.
All #GDBusServer::new-connection signals will run in separated dedicated threads (see signal for details).
Allow the anonymous authentication method.
Signature for callback function used in g_dbus_connection_signal_subscribe().
A #GDBusConnection.
The unique bus name of the sender of the signal.
The object path that the signal was emitted on.
The name of the interface.
The name of the signal.
A #GVariant tuple with parameters for the signal.
User data passed when subscribing to the signal.
Flags used when subscribing to signals via g_dbus_connection_signal_subscribe().
No flags set.
Don't actually send the AddMatch D-Bus call for this signal subscription. This gives you more control over which match rules you add (but you must add them manually).
Match first arguments that contain a bus or interface name with the given namespace.
Match first arguments that contain an object path that is either equivalent to the given path, or one of the paths is a subpath of the other.
Information about a signal on a D-Bus interface.
If @info is statically allocated does nothing. Otherwise increases
the reference count.
The same @info.
A #GDBusSignalInfo
If @info is statically allocated, does nothing. Otherwise decreases
the reference count of @info. When its reference count drops to 0,
the memory used is freed.
A #GDBusSignalInfo.
The type of the @dispatch function in #GDBusSubtreeVTable.
Subtrees are flat. @node, if non-%NULL, is always exactly one
segment of the object path (ie: it never contains a slash).
A #GDBusInterfaceVTable or %NULL if you don't want to handle the methods.
A #GDBusConnection.
The unique bus name of the remote caller.
The object path that was registered with g_dbus_connection_register_subtree().
The D-Bus interface name that the method call or property access is for.
A node that is a child of @object_path (relative to @object_path) or %NULL for the root of the subtree.
Return location for user data to pass to functions in the returned #GDBusInterfaceVTable (never %NULL).
The @user_data #gpointer passed to g_dbus_connection_register_subtree().
The type of the @enumerate function in #GDBusSubtreeVTable.
This function is called when generating introspection data and also
when preparing to dispatch incoming messages in the event that the
%G_DBUS_SUBTREE_FLAGS_DISPATCH_TO_UNENUMERATED_NODES flag is not
specified (ie: to verify that the object path is valid).
Hierarchies are not supported; the items that you return should not
contain the '/' character.
The return value will be freed with g_strfreev().
A newly allocated array of strings for node names that are children of @object_path.
A #GDBusConnection.
The unique bus name of the remote caller.
The object path that was registered with g_dbus_connection_register_subtree().
The @user_data #gpointer passed to g_dbus_connection_register_subtree().
Flags passed to g_dbus_connection_register_subtree().
No flags set.
Method calls to objects not in the enumerated range will still be dispatched. This is useful if you want to dynamically spawn objects in the subtree.
The type of the @introspect function in #GDBusSubtreeVTable.
Subtrees are flat. @node, if non-%NULL, is always exactly one
segment of the object path (ie: it never contains a slash).
This function should return %NULL to indicate that there is no object
at this node.
If this function returns non-%NULL, the return value is expected to
be a %NULL-terminated array of pointers to #GDBusInterfaceInfo
structures describing the interfaces implemented by @node. This
array will have g_dbus_interface_info_unref() called on each item
before being freed with g_free().
The difference between returning %NULL and an array containing zero
items is that the standard DBus interfaces will returned to the
remote introspector in the empty array case, but not in the %NULL
case.
A %NULL-terminated array of pointers to #GDBusInterfaceInfo, or %NULL.
A #GDBusConnection.
The unique bus name of the remote caller.
The object path that was registered with g_dbus_connection_register_subtree().
A node that is a child of @object_path (relative to @object_path) or %NULL for the root of the subtree.
The @user_data #gpointer passed to g_dbus_connection_register_subtree().
Virtual table for handling subtrees registered with g_dbus_connection_register_subtree().
Data input stream implements #GInputStream and includes functions for
reading structured data directly from a binary input stream.
Creates a new data input stream for the @base_stream.
a new #GDataInputStream.
a #GInputStream.
Gets the byte order for the data input stream.
the @stream's current #GDataStreamByteOrder.
a given #GDataInputStream.
Gets the current newline type for the @stream.
#GDataStreamNewlineType for the given @stream.
a given #GDataInputStream.
Reads an unsigned 8-bit/1-byte value from @stream.
an unsigned 8-bit/1-byte value read from the @stream or %0 if an error occurred.
a given #GDataInputStream.
optional #GCancellable object, %NULL to ignore.
Reads a 16-bit/2-byte value from @stream.
In order to get the correct byte order for this read operation,
see g_data_input_stream_get_byte_order() and g_data_input_stream_set_byte_order().
a signed 16-bit/2-byte value read from @stream or %0 if an error occurred.
a given #GDataInputStream.
optional #GCancellable object, %NULL to ignore.
Reads a signed 32-bit/4-byte value from @stream.
In order to get the correct byte order for this read operation,
see g_data_input_stream_get_byte_order() and g_data_input_stream_set_byte_order().
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
a signed 32-bit/4-byte value read from the @stream or %0 if an error occurred.
a given #GDataInputStream.
optional #GCancellable object, %NULL to ignore.
Reads a 64-bit/8-byte value from @stream.
In order to get the correct byte order for this read operation,
see g_data_input_stream_get_byte_order() and g_data_input_stream_set_byte_order().
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
a signed 64-bit/8-byte value read from @stream or %0 if an error occurred.
a given #GDataInputStream.
optional #GCancellable object, %NULL to ignore.
Reads a line from the data input stream. Note that no encoding
checks or conversion is performed; the input is not guaranteed to
be UTF-8, and may in fact have embedded NUL characters.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
a NUL terminated byte array with the line that was read in (without the newlines). Set @length to a #gsize to get the length of the read line. On an error, it will return %NULL and @error will be set. If there's no content to read, it will still return %NULL, but @error won't be set.
a given #GDataInputStream.
a #gsize to get the length of the data read in.
optional #GCancellable object, %NULL to ignore.
The asynchronous version of g_data_input_stream_read_line(). It is
an error to have two outstanding calls to this function.
When the operation is finished, @callback will be called. You
can then call g_data_input_stream_read_line_finish() to get
the result of the operation.
a given #GDataInputStream.
the <link linkend="io-priority">I/O priority</link> of the request.
optional #GCancellable object, %NULL to ignore.
callback to call when the request is satisfied.
the data to pass to callback function.
Finish an asynchronous call started by
g_data_input_stream_read_line_async(). Note the warning about
string encoding in g_data_input_stream_read_line() applies here as
well.
a NUL-terminated byte array with the line that was read in (without the newlines). Set @length to a #gsize to get the length of the read line. On an error, it will return %NULL and @error will be set. If there's no content to read, it will still return %NULL, but @error won't be set.
a given #GDataInputStream.
the #GAsyncResult that was provided to the callback.
a #gsize to get the length of the data read in.
Finish an asynchronous call started by
g_data_input_stream_read_line_async().
a string with the line that was read in (without the newlines). Set @length to a #gsize to get the length of the read line. On an error, it will return %NULL and @error will be set. For UTF-8 conversion errors, the set error domain is %G_CONVERT_ERROR. If there's no content to read, it will still return %NULL, but @error won't be set.
a given #GDataInputStream.
the #GAsyncResult that was provided to the callback.
a #gsize to get the length of the data read in.
Reads a UTF-8 encoded line from the data input stream.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
a NUL terminated UTF-8 string with the line that was read in (without the newlines). Set @length to a #gsize to get the length of the read line. On an error, it will return %NULL and @error will be set. For UTF-8 conversion errors, the set error domain is %G_CONVERT_ERROR. If there's no content to read, it will still return %NULL, but @error won't be set.
a given #GDataInputStream.
a #gsize to get the length of the data read in.
optional #GCancellable object, %NULL to ignore.
Reads an unsigned 16-bit/2-byte value from @stream.
In order to get the correct byte order for this read operation,
see g_data_input_stream_get_byte_order() and g_data_input_stream_set_byte_order().
an unsigned 16-bit/2-byte value read from the @stream or %0 if an error occurred.
a given #GDataInputStream.
optional #GCancellable object, %NULL to ignore.
Reads an unsigned 32-bit/4-byte value from @stream.
In order to get the correct byte order for this read operation,
see g_data_input_stream_get_byte_order() and g_data_input_stream_set_byte_order().
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
an unsigned 32-bit/4-byte value read from the @stream or %0 if an error occurred.
a given #GDataInputStream.
optional #GCancellable object, %NULL to ignore.
Reads an unsigned 64-bit/8-byte value from @stream.
In order to get the correct byte order for this read operation,
see g_data_input_stream_get_byte_order().
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
an unsigned 64-bit/8-byte read from @stream or %0 if an error occurred.
a given #GDataInputStream.
optional #GCancellable object, %NULL to ignore.
Reads a string from the data input stream, up to the first
occurrence of any of the stop characters.
Note that, in contrast to g_data_input_stream_read_until_async(),
this function consumes the stop character that it finds.
Don't use this function in new code. Its functionality is
inconsistent with g_data_input_stream_read_until_async(). Both
functions will be marked as deprecated in a future release. Use
g_data_input_stream_read_upto() instead, but note that that function
does not consume the stop character.
a string with the data that was read before encountering any of the stop characters. Set @length to a #gsize to get the length of the string. This function will return %NULL on an error.
a given #GDataInputStream.
characters to terminate the read.
a #gsize to get the length of the data read in.
optional #GCancellable object, %NULL to ignore.
The asynchronous version of g_data_input_stream_read_until().
It is an error to have two outstanding calls to this function.
Note that, in contrast to g_data_input_stream_read_until(),
this function does not consume the stop character that it finds. You
must read it for yourself.
When the operation is finished, @callback will be called. You
can then call g_data_input_stream_read_until_finish() to get
the result of the operation.
Don't use this function in new code. Its functionality is
inconsistent with g_data_input_stream_read_until(). Both functions
will be marked as deprecated in a future release. Use
g_data_input_stream_read_upto_async() instead.
a given #GDataInputStream.
characters to terminate the read.
the <link linkend="io-priority">I/O priority</link> of the request.
optional #GCancellable object, %NULL to ignore.
callback to call when the request is satisfied.
the data to pass to callback function.
Finish an asynchronous call started by
g_data_input_stream_read_until_async().
a string with the data that was read before encountering any of the stop characters. Set @length to a #gsize to get the length of the string. This function will return %NULL on an error.
a given #GDataInputStream.
the #GAsyncResult that was provided to the callback.
a #gsize to get the length of the data read in.
Reads a string from the data input stream, up to the first
occurrence of any of the stop characters.
In contrast to g_data_input_stream_read_until(), this function
does <emphasis>not</emphasis> consume the stop character. You have
to use g_data_input_stream_read_byte() to get it before calling
g_data_input_stream_read_upto() again.
Note that @stop_chars may contain '\0' if @stop_chars_len is
specified.
a string with the data that was read before encountering any of the stop characters. Set @length to a #gsize to get the length of the string. This function will return %NULL on an error
a #GDataInputStream
characters to terminate the read
length of @stop_chars. May be -1 if @stop_chars is nul-terminated
a #gsize to get the length of the data read in
optional #GCancellable object, %NULL to ignore
The asynchronous version of g_data_input_stream_read_upto().
It is an error to have two outstanding calls to this function.
In contrast to g_data_input_stream_read_until(), this function
does <emphasis>not</emphasis> consume the stop character. You have
to use g_data_input_stream_read_byte() to get it before calling
g_data_input_stream_read_upto() again.
Note that @stop_chars may contain '\0' if @stop_chars_len is
specified.
When the operation is finished, @callback will be called. You
can then call g_data_input_stream_read_upto_finish() to get
the result of the operation.
a #GDataInputStream
characters to terminate the read
length of @stop_chars. May be -1 if @stop_chars is nul-terminated
the <link linkend="io-priority">I/O priority</link> of the request.
optional #GCancellable object, %NULL to ignore
callback to call when the request is satisfied
the data to pass to callback function
Finish an asynchronous call started by
g_data_input_stream_read_upto_async().
Note that this function does <emphasis>not</emphasis> consume the
stop character. You have to use g_data_input_stream_read_byte() to
get it before calling g_data_input_stream_read_upto_async() again.
a string with the data that was read before encountering any of the stop characters. Set @length to a #gsize to get the length of the string. This function will return %NULL on an error.
a #GDataInputStream
the #GAsyncResult that was provided to the callback
a #gsize to get the length of the data read in
This function sets the byte order for the given @stream. All subsequent
reads from the @stream will be read in the given @order.
a given #GDataInputStream.
a #GDataStreamByteOrder to set.
Sets the newline type for the @stream.
Note that using G_DATA_STREAM_NEWLINE_TYPE_ANY is slightly unsafe. If a read
chunk ends in "CR" we must read an additional byte to know if this is "CR" or
"CR LF", and this might block if there is no more data available.
a #GDataInputStream.
the type of new line return as #GDataStreamNewlineType.
Data output stream implements #GOutputStream and includes functions for
writing data directly to an output stream.
Creates a new data output stream for @base_stream.
#GDataOutputStream.
a #GOutputStream.
Gets the byte order for the stream.
the #GDataStreamByteOrder for the @stream.
a #GDataOutputStream.
Puts a byte into the output stream.
%TRUE if @data was successfully added to the @stream.
a #GDataOutputStream.
a #guchar.
optional #GCancellable object, %NULL to ignore.
Puts a signed 16-bit integer into the output stream.
%TRUE if @data was successfully added to the @stream.
a #GDataOutputStream.
a #gint16.
optional #GCancellable object, %NULL to ignore.
Puts a signed 32-bit integer into the output stream.
%TRUE if @data was successfully added to the @stream.
a #GDataOutputStream.
a #gint32.
optional #GCancellable object, %NULL to ignore.
Puts a signed 64-bit integer into the stream.
%TRUE if @data was successfully added to the @stream.
a #GDataOutputStream.
a #gint64.
optional #GCancellable object, %NULL to ignore.
Puts a string into the output stream.
%TRUE if @string was successfully added to the @stream.
a #GDataOutputStream.
a string.
optional #GCancellable object, %NULL to ignore.
Puts an unsigned 16-bit integer into the output stream.
%TRUE if @data was successfully added to the @stream.
a #GDataOutputStream.
a #guint16.
optional #GCancellable object, %NULL to ignore.
Puts an unsigned 32-bit integer into the stream.
%TRUE if @data was successfully added to the @stream.
a #GDataOutputStream.
a #guint32.
optional #GCancellable object, %NULL to ignore.
Puts an unsigned 64-bit integer into the stream.
%TRUE if @data was successfully added to the @stream.
a #GDataOutputStream.
a #guint64.
optional #GCancellable object, %NULL to ignore.
Sets the byte order of the data output stream to @order.
a #GDataOutputStream.
a %GDataStreamByteOrder.
Determines the byte ordering that is used when writing
multi-byte entities (such as integers) to the stream.
#GDataStreamByteOrder is used to ensure proper endianness of streaming data sources
across various machine architectures.
Selects Big Endian byte order.
Selects Little Endian byte order.
Selects endianness based on host machine's architecture.
#GDataStreamNewlineType is used when checking for or setting the line endings for a given file.
Selects "LF" line endings, common on most modern UNIX platforms.
Selects "CR" line endings.
Selects "CR, LF" line ending, common on Microsoft Windows.
Automatically try to handle any line ending type.
#GDrive - this represent a piece of hardware connected to the machine.
It's generally only created for removable hardware or hardware with
removable media.
#GDrive is a container class for #GVolume objects that stem from
the same piece of media. As such, #GDrive abstracts a drive with
(or without) removable media and provides operations for querying
whether media is available, determining whether media change is
automatically detected and ejecting the media.
If the #GDrive reports that media isn't automatically detected, one
can poll for media; typically one should not do this periodically
as a poll for media operation is potententially expensive and may
spin up the drive creating noise.
#GDrive supports starting and stopping drives with authentication
support for the former. This can be used to support a diverse set
of use cases including connecting/disconnecting iSCSI devices,
powering down external disk enclosures and starting/stopping
multi-disk devices such as RAID devices. Note that the actual
semantics and side-effects of starting/stopping a #GDrive may vary
according to implementation. To choose the correct verbs in e.g. a
file manager, use g_drive_get_start_stop_type().
For porting from GnomeVFS note that there is no equivalent of
#GDrive in that API.
Checks if a drive can be ejected.
%TRUE if the @drive can be ejected, %FALSE otherwise.
Checks if a drive can be polled for media changes.
%TRUE if the @drive can be polled for media changes, %FALSE otherwise.
Checks if a drive can be started.
%TRUE if the @drive can be started, %FALSE otherwise.
Checks if a drive can be started degraded.
%TRUE if the @drive can be started degraded, %FALSE otherwise.
Checks if a drive can be stopped.
%TRUE if the @drive can be stopped, %FALSE otherwise.
Asynchronously ejects a drive.
When the operation is finished, @callback will be called.
You can then call g_drive_eject_finish() to obtain the
result of the operation.
flags affecting the unmount if required for eject
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback, or %NULL.
user data to pass to @callback
Finishes ejecting a drive.
%TRUE if the drive has been ejected successfully, %FALSE otherwise.
a #GAsyncResult.
Ejects a drive. This is an asynchronous operation, and is
finished by calling g_drive_eject_with_operation_finish() with the @drive
and #GAsyncResult data returned in the @callback.
flags affecting the unmount if required for eject
a #GMountOperation or %NULL to avoid user interaction.
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback, or %NULL.
user data passed to @callback.
Finishes ejecting a drive. If any errors occurred during the operation,
@error will be set to contain the errors and %FALSE will be returned.
%TRUE if the drive was successfully ejected. %FALSE otherwise.
a #GAsyncResult.
Gets the kinds of identifiers that @drive has.
Use g_drive_get_identifier() to obtain the identifiers
themselves.
a %NULL-terminated array of strings containing kinds of identifiers. Use g_strfreev() to free.
Gets the icon for @drive.
#GIcon for the @drive. Free the returned object with g_object_unref().
Gets the identifier of the given kind for @drive.
a newly allocated string containing the requested identfier, or %NULL if the #GDrive doesn't have this kind of identifier.
the kind of identifier to return
Gets the name of @drive.
a string containing @drive's name. The returned string should be freed when no longer needed.
Gets the sort key for @drive, if any.
Sorting key for @drive or %NULL if no such key is available.
Gets a hint about how a drive can be started/stopped.
A value from the #GDriveStartStopType enumeration.
Gets the icon for @drive.
symbolic #GIcon for the @drive. Free the returned object with g_object_unref().
Get a list of mountable volumes for @drive.
The returned list should be freed with g_list_free(), after
its elements have been unreffed with g_object_unref().
#GList containing any #GVolume objects on the given @drive.
Checks if the @drive has media. Note that the OS may not be polling
the drive for media changes; see g_drive_is_media_check_automatic()
for more details.
%TRUE if @drive has media, %FALSE otherwise.
Check if @drive has any mountable volumes.
%TRUE if the @drive contains volumes, %FALSE otherwise.
Checks if @drive is capabable of automatically detecting media changes.
%TRUE if the @drive is capabable of automatically detecting media changes, %FALSE otherwise.
Checks if the @drive supports removable media.
%TRUE if @drive supports removable media, %FALSE otherwise.
Asynchronously polls @drive to see if media has been inserted or removed.
When the operation is finished, @callback will be called.
You can then call g_drive_poll_for_media_finish() to obtain the
result of the operation.
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback, or %NULL.
user data to pass to @callback
Finishes an operation started with g_drive_poll_for_media() on a drive.
%TRUE if the drive has been poll_for_mediaed successfully, %FALSE otherwise.
a #GAsyncResult.
Asynchronously starts a drive.
When the operation is finished, @callback will be called.
You can then call g_drive_start_finish() to obtain the
result of the operation.
flags affecting the start operation.
a #GMountOperation or %NULL to avoid user interaction.
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback, or %NULL.
user data to pass to @callback
Finishes starting a drive.
%TRUE if the drive has been started successfully, %FALSE otherwise.
a #GAsyncResult.
Asynchronously stops a drive.
When the operation is finished, @callback will be called.
You can then call g_drive_stop_finish() to obtain the
result of the operation.
flags affecting the unmount if required for stopping.
a #GMountOperation or %NULL to avoid user interaction.
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback, or %NULL.
user data to pass to @callback
Finishes stopping a drive.
%TRUE if the drive has been stopped successfully, %FALSE otherwise.
a #GAsyncResult.
Checks if a drive can be ejected.
%TRUE if the @drive can be ejected, %FALSE otherwise.
a #GDrive.
Checks if a drive can be polled for media changes.
%TRUE if the @drive can be polled for media changes, %FALSE otherwise.
a #GDrive.
Checks if a drive can be started.
%TRUE if the @drive can be started, %FALSE otherwise.
a #GDrive.
Checks if a drive can be started degraded.
%TRUE if the @drive can be started degraded, %FALSE otherwise.
a #GDrive.
Checks if a drive can be stopped.
%TRUE if the @drive can be stopped, %FALSE otherwise.
a #GDrive.
Asynchronously ejects a drive.
When the operation is finished, @callback will be called.
You can then call g_drive_eject_finish() to obtain the
result of the operation.
a #GDrive.
flags affecting the unmount if required for eject
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback, or %NULL.
user data to pass to @callback
Finishes ejecting a drive.
%TRUE if the drive has been ejected successfully, %FALSE otherwise.
a #GDrive.
a #GAsyncResult.
Ejects a drive. This is an asynchronous operation, and is
finished by calling g_drive_eject_with_operation_finish() with the @drive
and #GAsyncResult data returned in the @callback.
a #GDrive.
flags affecting the unmount if required for eject
a #GMountOperation or %NULL to avoid user interaction.
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback, or %NULL.
user data passed to @callback.
Finishes ejecting a drive. If any errors occurred during the operation,
@error will be set to contain the errors and %FALSE will be returned.
%TRUE if the drive was successfully ejected. %FALSE otherwise.
a #GDrive.
a #GAsyncResult.
Gets the kinds of identifiers that @drive has.
Use g_drive_get_identifier() to obtain the identifiers
themselves.
a %NULL-terminated array of strings containing kinds of identifiers. Use g_strfreev() to free.
a #GDrive
Gets the icon for @drive.
#GIcon for the @drive. Free the returned object with g_object_unref().
a #GDrive.
Gets the identifier of the given kind for @drive.
a newly allocated string containing the requested identfier, or %NULL if the #GDrive doesn't have this kind of identifier.
a #GDrive
the kind of identifier to return
Gets the name of @drive.
a string containing @drive's name. The returned string should be freed when no longer needed.
a #GDrive.
Gets the sort key for @drive, if any.
Sorting key for @drive or %NULL if no such key is available.
A #GDrive.
Gets a hint about how a drive can be started/stopped.
A value from the #GDriveStartStopType enumeration.
a #GDrive.
Gets the icon for @drive.
symbolic #GIcon for the @drive. Free the returned object with g_object_unref().
a #GDrive.
Get a list of mountable volumes for @drive.
The returned list should be freed with g_list_free(), after
its elements have been unreffed with g_object_unref().
#GList containing any #GVolume objects on the given @drive.
a #GDrive.
Checks if the @drive has media. Note that the OS may not be polling
the drive for media changes; see g_drive_is_media_check_automatic()
for more details.
%TRUE if @drive has media, %FALSE otherwise.
a #GDrive.
Check if @drive has any mountable volumes.
%TRUE if the @drive contains volumes, %FALSE otherwise.
a #GDrive.
Checks if @drive is capabable of automatically detecting media changes.
%TRUE if the @drive is capabable of automatically detecting media changes, %FALSE otherwise.
a #GDrive.
Checks if the @drive supports removable media.
%TRUE if @drive supports removable media, %FALSE otherwise.
a #GDrive.
Asynchronously polls @drive to see if media has been inserted or removed.
When the operation is finished, @callback will be called.
You can then call g_drive_poll_for_media_finish() to obtain the
result of the operation.
a #GDrive.
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback, or %NULL.
user data to pass to @callback
Finishes an operation started with g_drive_poll_for_media() on a drive.
%TRUE if the drive has been poll_for_mediaed successfully, %FALSE otherwise.
a #GDrive.
a #GAsyncResult.
Asynchronously starts a drive.
When the operation is finished, @callback will be called.
You can then call g_drive_start_finish() to obtain the
result of the operation.
a #GDrive.
flags affecting the start operation.
a #GMountOperation or %NULL to avoid user interaction.
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback, or %NULL.
user data to pass to @callback
Finishes starting a drive.
%TRUE if the drive has been started successfully, %FALSE otherwise.
a #GDrive.
a #GAsyncResult.
Asynchronously stops a drive.
When the operation is finished, @callback will be called.
You can then call g_drive_stop_finish() to obtain the
result of the operation.
a #GDrive.
flags affecting the unmount if required for stopping.
a #GMountOperation or %NULL to avoid user interaction.
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback, or %NULL.
user data to pass to @callback
Finishes stopping a drive.
%TRUE if the drive has been stopped successfully, %FALSE otherwise.
a #GDrive.
a #GAsyncResult.
Emitted when the drive's state has changed.
This signal is emitted when the #GDrive have been
disconnected. If the recipient is holding references to the
object they should release them so the object can be
finalized.
Emitted when the physical eject button (if any) of a drive has
been pressed.
Emitted when the physical stop button (if any) of a drive has
been pressed.
Interface for creating #GDrive implementations.
a string containing @drive's name. The returned string should be freed when no longer needed.
#GIcon for the @drive. Free the returned object with g_object_unref().
%TRUE if the @drive contains volumes, %FALSE otherwise.
#GList containing any #GVolume objects on the given @drive.
%TRUE if @drive supports removable media, %FALSE otherwise.
%TRUE if @drive has media, %FALSE otherwise.
%TRUE if the @drive is capabable of automatically detecting media changes, %FALSE otherwise.
%TRUE if the @drive can be ejected, %FALSE otherwise.
%TRUE if the @drive can be polled for media changes, %FALSE otherwise.
flags affecting the unmount if required for eject
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback, or %NULL.
user data to pass to @callback
%TRUE if the drive has been ejected successfully, %FALSE otherwise.
a #GAsyncResult.
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback, or %NULL.
user data to pass to @callback
%TRUE if the drive has been poll_for_mediaed successfully, %FALSE otherwise.
a #GAsyncResult.
a newly allocated string containing the requested identfier, or %NULL if the #GDrive doesn't have this kind of identifier.
the kind of identifier to return
a %NULL-terminated array of strings containing kinds of identifiers. Use g_strfreev() to free.
A value from the #GDriveStartStopType enumeration.
%TRUE if the @drive can be started, %FALSE otherwise.
%TRUE if the @drive can be started degraded, %FALSE otherwise.
flags affecting the start operation.
a #GMountOperation or %NULL to avoid user interaction.
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback, or %NULL.
user data to pass to @callback
%TRUE if the drive has been started successfully, %FALSE otherwise.
a #GAsyncResult.
%TRUE if the @drive can be stopped, %FALSE otherwise.
flags affecting the unmount if required for stopping.
a #GMountOperation or %NULL to avoid user interaction.
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback, or %NULL.
user data to pass to @callback
%TRUE if the drive has been stopped successfully, %FALSE otherwise.
a #GAsyncResult.
flags affecting the unmount if required for eject
a #GMountOperation or %NULL to avoid user interaction.
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback, or %NULL.
user data passed to @callback.
%TRUE if the drive was successfully ejected. %FALSE otherwise.
a #GAsyncResult.
Sorting key for @drive or %NULL if no such key is available.
symbolic #GIcon for the @drive. Free the returned object with g_object_unref().
Flags used when starting a drive.
No flags set.
Enumeration describing how a drive can be started/stopped.
Unknown or drive doesn't support start/stop.
The stop method will physically shut down the drive and e.g. power down the port the drive is attached to.
The start/stop methods are used for connecting/disconnect to the drive over the network.
The start/stop methods will assemble/disassemble a virtual drive from several physical drives.
The start/stop methods will unlock/lock the disk (for example using the ATA <quote>SECURITY UNLOCK DEVICE</quote> command)
#GEmblem is an implementation of #GIcon that supports
having an emblem, which is an icon with additional properties.
It can than be added to a #GEmblemedIcon.
Currently, only metainformation about the emblem's origin is
supported. More may be added in the future.
Creates a new emblem for @icon.
a new #GEmblem.
a GIcon containing the icon.
Creates a new emblem for @icon.
a new #GEmblem.
a GIcon containing the icon.
a GEmblemOrigin enum defining the emblem's origin
Gives back the icon from @emblem.
a #GIcon. The returned object belongs to the emblem and should not be modified or freed.
a #GEmblem from which the icon should be extracted.
Gets the origin of the emblem.
the origin of the emblem
a #GEmblem
GEmblemOrigin is used to add information about the origin of the emblem
to #GEmblem.
Emblem of unknown origin
Emblem adds device-specific information
Emblem depicts live metadata, such as "readonly"
Emblem comes from a user-defined tag, e.g. set by nautilus (in the future)
#GEmblemedIcon is an implementation of #GIcon that supports
adding an emblem to an icon. Adding multiple emblems to an
icon is ensured via g_emblemed_icon_add_emblem().
Note that #GEmblemedIcon allows no control over the position
of the emblems. See also #GEmblem for more information.
Creates a new emblemed icon for @icon with the emblem @emblem.
a new #GIcon
a #GIcon
a #GEmblem, or %NULL
Adds @emblem to the #GList of #GEmblem <!-- -->s.
a #GEmblemedIcon
a #GEmblem
Removes all the emblems from @icon.
a #GEmblemedIcon
Gets the list of emblems for the @icon.
a #GList of #GEmblem <!-- -->s that is owned by @emblemed
a #GEmblemedIcon
Gets the main icon for @emblemed.
a #GIcon that is owned by @emblemed
a #GEmblemedIcon
A key in the "access" namespace for checking deletion privileges.
Corresponding #GFileAttributeType is %G_FILE_ATTRIBUTE_TYPE_BOOLEAN.
This attribute will be %TRUE if the user is able to delete the file.
A key in the "access" namespace for getting execution privileges.
Corresponding #GFileAttributeType is %G_FILE_ATTRIBUTE_TYPE_BOOLEAN.
This attribute will be %TRUE if the user is able to execute the file.
A key in the "access" namespace for getting read privileges.
Corresponding #GFileAttributeType is %G_FILE_ATTRIBUTE_TYPE_BOOLEAN.
This attribute will be %TRUE if the user is able to read the file.
A key in the "access" namespace for checking renaming privileges.
Corresponding #GFileAttributeType is %G_FILE_ATTRIBUTE_TYPE_BOOLEAN.
This attribute will be %TRUE if the user is able to rename the file.
A key in the "access" namespace for checking trashing privileges.
Corresponding #GFileAttributeType is %G_FILE_ATTRIBUTE_TYPE_BOOLEAN.
This attribute will be %TRUE if the user is able to move the file to
the trash.
A key in the "access" namespace for getting write privileges.
Corresponding #GFileAttributeType is %G_FILE_ATTRIBUTE_TYPE_BOOLEAN.
This attribute will be %TRUE if the user is able to write to the file.
A key in the "dos" namespace for checking if the file's archive flag
is set. This attribute is %TRUE if the archive flag is set. This attribute
is only available for DOS file systems. Corresponding #GFileAttributeType
is %G_FILE_ATTRIBUTE_TYPE_BOOLEAN.
A key in the "dos" namespace for checking if the file's backup flag
is set. This attribute is %TRUE if the backup flag is set. This attribute
is only available for DOS file systems. Corresponding #GFileAttributeType
is %G_FILE_ATTRIBUTE_TYPE_BOOLEAN.
A key in the "etag" namespace for getting the value of the file's
entity tag. Corresponding #GFileAttributeType is
%G_FILE_ATTRIBUTE_TYPE_STRING.
A key in the "filesystem" namespace for getting the number of bytes of free space left on the
file system. Corresponding #GFileAttributeType is
%G_FILE_ATTRIBUTE_TYPE_UINT64.
A key in the "filesystem" namespace for checking if the file system
is read only. Is set to %TRUE if the file system is read only.
Corresponding #GFileAttributeType is %G_FILE_ATTRIBUTE_TYPE_BOOLEAN.
A key in the "filesystem" namespace for getting the total size (in bytes) of the file system,
used in g_file_query_filesystem_info(). Corresponding #GFileAttributeType
is %G_FILE_ATTRIBUTE_TYPE_UINT64.
A key in the "filesystem" namespace for getting the file system's type.
Corresponding #GFileAttributeType is %G_FILE_ATTRIBUTE_TYPE_STRING.
A key in the "filesystem" namespace for getting the number of bytes of used on the
file system. Corresponding #GFileAttributeType is
%G_FILE_ATTRIBUTE_TYPE_UINT64.
A key in the "filesystem" namespace for hinting a file manager
application whether it should preview (e.g. thumbnail) files on the
file system. The value for this key contain a
#GFilesystemPreviewType.
A key in the "gvfs" namespace that gets the name of the current
GVFS backend in use. Corresponding #GFileAttributeType is
%G_FILE_ATTRIBUTE_TYPE_STRING.
A key in the "id" namespace for getting a file identifier.
Corresponding #GFileAttributeType is %G_FILE_ATTRIBUTE_TYPE_STRING.
An example use would be during listing files, to avoid recursive
directory scanning.
A key in the "id" namespace for getting the file system identifier.
Corresponding #GFileAttributeType is %G_FILE_ATTRIBUTE_TYPE_STRING.
An example use would be during drag and drop to see if the source
and target are on the same filesystem (default to move) or not (default
to copy).
A key in the "mountable" namespace for checking if a file (of type G_FILE_TYPE_MOUNTABLE) can be ejected.
Corresponding #GFileAttributeType is %G_FILE_ATTRIBUTE_TYPE_BOOLEAN.
A key in the "mountable" namespace for checking if a file (of type G_FILE_TYPE_MOUNTABLE) is mountable.
Corresponding #GFileAttributeType is %G_FILE_ATTRIBUTE_TYPE_BOOLEAN.
A key in the "mountable" namespace for checking if a file (of type G_FILE_TYPE_MOUNTABLE) can be polled.
Corresponding #GFileAttributeType is %G_FILE_ATTRIBUTE_TYPE_BOOLEAN.
A key in the "mountable" namespace for checking if a file (of type G_FILE_TYPE_MOUNTABLE) can be started.
Corresponding #GFileAttributeType is %G_FILE_ATTRIBUTE_TYPE_BOOLEAN.
A key in the "mountable" namespace for checking if a file (of type G_FILE_TYPE_MOUNTABLE) can be started
degraded.
Corresponding #GFileAttributeType is %G_FILE_ATTRIBUTE_TYPE_BOOLEAN.
A key in the "mountable" namespace for checking if a file (of type G_FILE_TYPE_MOUNTABLE) can be stopped.
Corresponding #GFileAttributeType is %G_FILE_ATTRIBUTE_TYPE_BOOLEAN.
A key in the "mountable" namespace for checking if a file (of type G_FILE_TYPE_MOUNTABLE) is unmountable.
Corresponding #GFileAttributeType is %G_FILE_ATTRIBUTE_TYPE_BOOLEAN.
A key in the "mountable" namespace for getting the HAL UDI for the mountable
file. Corresponding #GFileAttributeType is %G_FILE_ATTRIBUTE_TYPE_STRING.
A key in the "mountable" namespace for checking if a file (of type G_FILE_TYPE_MOUNTABLE)
is automatically polled for media.
Corresponding #GFileAttributeType is %G_FILE_ATTRIBUTE_TYPE_BOOLEAN.
A key in the "mountable" namespace for getting the #GDriveStartStopType.
Corresponding #GFileAttributeType is %G_FILE_ATTRIBUTE_TYPE_UINT32.
A key in the "mountable" namespace for getting the unix device.
Corresponding #GFileAttributeType is %G_FILE_ATTRIBUTE_TYPE_UINT32.
A key in the "mountable" namespace for getting the unix device file.
Corresponding #GFileAttributeType is %G_FILE_ATTRIBUTE_TYPE_STRING.
A key in the "owner" namespace for getting the file owner's group.
Corresponding #GFileAttributeType is %G_FILE_ATTRIBUTE_TYPE_STRING.
A key in the "owner" namespace for getting the user name of the
file's owner. Corresponding #GFileAttributeType is
%G_FILE_ATTRIBUTE_TYPE_STRING.
A key in the "owner" namespace for getting the real name of the
user that owns the file. Corresponding #GFileAttributeType is
%G_FILE_ATTRIBUTE_TYPE_STRING.
A key in the "preview" namespace for getting a #GIcon that can be
used to get preview of the file. For example, it may be a low
resolution thumbnail without metadata. Corresponding
#GFileAttributeType is %G_FILE_ATTRIBUTE_TYPE_OBJECT. The value
for this key should contain a #GIcon.
A key in the "selinux" namespace for getting the file's SELinux
context. Corresponding #GFileAttributeType is
%G_FILE_ATTRIBUTE_TYPE_STRING. Note that this attribute is only
available if GLib has been built with SELinux support.
A key in the "standard" namespace for getting the amount of disk space
that is consumed by the file (in bytes). This will generally be larger
than the file size (due to block size overhead) but can occasionally be
smaller (for example, for sparse files).
Corresponding #GFileAttributeType is %G_FILE_ATTRIBUTE_TYPE_UINT64.
A key in the "standard" namespace for getting the content type of the file.
Corresponding #GFileAttributeType is %G_FILE_ATTRIBUTE_TYPE_STRING.
The value for this key should contain a valid content type.
A key in the "standard" namespace for getting the copy name of the file.
The copy name is an optional version of the name. If available it's always
in UTF8, and corresponds directly to the original filename (only transcoded to
UTF8). This is useful if you want to copy the file to another filesystem that
might have a different encoding. If the filename is not a valid string in the
encoding selected for the filesystem it is in then the copy name will not be set.
Corresponding #GFileAttributeType is %G_FILE_ATTRIBUTE_TYPE_STRING.
A key in the "standard" namespace for getting the description of the file.
The description is a utf8 string that describes the file, generally containing
the filename, but can also contain furter information. Example descriptions
could be "filename (on hostname)" for a remote file or "filename (in trash)"
for a file in the trash. This is useful for instance as the window title
when displaying a directory or for a bookmarks menu.
Corresponding #GFileAttributeType is %G_FILE_ATTRIBUTE_TYPE_STRING.
A key in the "standard" namespace for getting the display name of the file.
A display name is guaranteed to be in UTF8 and can thus be displayed in
the UI.
Corresponding #GFileAttributeType is %G_FILE_ATTRIBUTE_TYPE_STRING.
A key in the "standard" namespace for edit name of the file.
An edit name is similar to the display name, but it is meant to be
used when you want to rename the file in the UI. The display name
might contain information you don't want in the new filename (such as
"(invalid unicode)" if the filename was in an invalid encoding).
Corresponding #GFileAttributeType is %G_FILE_ATTRIBUTE_TYPE_STRING.
A key in the "standard" namespace for getting the fast content type.
The fast content type isn't as reliable as the regular one, as it
only uses the filename to guess it, but it is faster to calculate than the
regular content type.
Corresponding #GFileAttributeType is %G_FILE_ATTRIBUTE_TYPE_STRING.
A key in the "standard" namespace for getting the icon for the file.
Corresponding #GFileAttributeType is %G_FILE_ATTRIBUTE_TYPE_OBJECT.
The value for this key should contain a #GIcon.
A key in the "standard" namespace for checking if a file is a backup file.
Corresponding #GFileAttributeType is %G_FILE_ATTRIBUTE_TYPE_BOOLEAN.
A key in the "standard" namespace for checking if a file is hidden.
Corresponding #GFileAttributeType is %G_FILE_ATTRIBUTE_TYPE_BOOLEAN.
A key in the "standard" namespace for checking if the file is a symlink.
Typically the actual type is something else, if we followed the symlink
to get the type.
Corresponding #GFileAttributeType is %G_FILE_ATTRIBUTE_TYPE_BOOLEAN.
A key in the "standard" namespace for checking if a file is virtual.
Corresponding #GFileAttributeType is %G_FILE_ATTRIBUTE_TYPE_BOOLEAN.
A key in the "standard" namespace for getting the name of the file.
The name is the on-disk filename which may not be in any known encoding,
and can thus not be generally displayed as is.
Use #G_FILE_ATTRIBUTE_STANDARD_DISPLAY_NAME if you need to display the
name in a user interface.
Corresponding #GFileAttributeType is %G_FILE_ATTRIBUTE_TYPE_BYTE_STRING.
A key in the "standard" namespace for getting the file's size (in bytes).
Corresponding #GFileAttributeType is %G_FILE_ATTRIBUTE_TYPE_UINT64.
A key in the "standard" namespace for setting the sort order of a file.
Corresponding #GFileAttributeType is %G_FILE_ATTRIBUTE_TYPE_INT32.
An example use would be in file managers, which would use this key
to set the order files are displayed. Files with smaller sort order
should be sorted first, and files without sort order as if sort order
was zero.
A key in the "standard" namespace for getting the symbolic icon for the file.
Corresponding #GFileAttributeType is %G_FILE_ATTRIBUTE_TYPE_OBJECT.
The value for this key should contain a #GIcon.
A key in the "standard" namespace for getting the symlink target, if the file
is a symlink. Corresponding #GFileAttributeType is
%G_FILE_ATTRIBUTE_TYPE_BYTE_STRING.
A key in the "standard" namespace for getting the target URI for the file, in
the case of %G_FILE_TYPE_SHORTCUT or %G_FILE_TYPE_MOUNTABLE files.
Corresponding #GFileAttributeType is %G_FILE_ATTRIBUTE_TYPE_STRING.
A key in the "standard" namespace for storing file types.
Corresponding #GFileAttributeType is %G_FILE_ATTRIBUTE_TYPE_UINT32.
The value for this key should contain a #GFileType.
A key in the "thumbnail" namespace for checking if thumbnailing failed.
This attribute is %TRUE if thumbnailing failed. Corresponding
#GFileAttributeType is %G_FILE_ATTRIBUTE_TYPE_BOOLEAN.
A key in the "thumbnail" namespace for getting the path to the thumbnail
image. Corresponding #GFileAttributeType is
%G_FILE_ATTRIBUTE_TYPE_BYTE_STRING.
A key in the "time" namespace for getting the time the file was last
accessed. Corresponding #GFileAttributeType is
%G_FILE_ATTRIBUTE_TYPE_UINT64, and contains the UNIX time since the
file was last accessed.
A key in the "time" namespace for getting the microseconds of the time
the file was last accessed. This should be used in conjunction with
#G_FILE_ATTRIBUTE_TIME_ACCESS. Corresponding #GFileAttributeType is
%G_FILE_ATTRIBUTE_TYPE_UINT32.
A key in the "time" namespace for getting the time the file was last
changed. Corresponding #GFileAttributeType is %G_FILE_ATTRIBUTE_TYPE_UINT64,
and contains the UNIX time since the file was last changed.
This corresponds to the traditional UNIX ctime.
A key in the "time" namespace for getting the microseconds of the time
the file was last changed. This should be used in conjunction with
#G_FILE_ATTRIBUTE_TIME_CHANGED. Corresponding #GFileAttributeType is
%G_FILE_ATTRIBUTE_TYPE_UINT32.
A key in the "time" namespace for getting the time the file was created.
Corresponding #GFileAttributeType is %G_FILE_ATTRIBUTE_TYPE_UINT64,
and contains the UNIX time since the file was created.
This corresponds to the NTFS ctime.
A key in the "time" namespace for getting the microseconds of the time
the file was created. This should be used in conjunction with
#G_FILE_ATTRIBUTE_TIME_CREATED. Corresponding #GFileAttributeType is
%G_FILE_ATTRIBUTE_TYPE_UINT32.
A key in the "time" namespace for getting the time the file was last
modified. Corresponding #GFileAttributeType is
%G_FILE_ATTRIBUTE_TYPE_UINT64, and contains the UNIX time since the
file was modified.
A key in the "time" namespace for getting the miliseconds of the time
the file was last modified. This should be used in conjunction with
#G_FILE_ATTRIBUTE_TIME_MODIFIED. Corresponding #GFileAttributeType is
%G_FILE_ATTRIBUTE_TYPE_UINT32.
A key in the "trash" namespace. When requested against
items in "trash:///", will return the date and time when the file
was trashed. The format of the returned string is YYYY-MM-DDThh:mm:ss.
Corresponding #GFileAttributeType is %G_FILE_ATTRIBUTE_TYPE_STRING.
A key in the "trash" namespace. When requested against
"trash:///" returns the number of (toplevel) items in the trash folder.
Corresponding #GFileAttributeType is %G_FILE_ATTRIBUTE_TYPE_UINT32.
A key in the "trash" namespace. When requested against
items in "trash:///", will return the original path to the file before it
was trashed. Corresponding #GFileAttributeType is
%G_FILE_ATTRIBUTE_TYPE_BYTE_STRING.
A key in the "unix" namespace for getting the number of blocks allocated
for the file. This attribute is only available for UNIX file systems.
Corresponding #GFileAttributeType is %G_FILE_ATTRIBUTE_TYPE_UINT64.
A key in the "unix" namespace for getting the block size for the file
system. This attribute is only available for UNIX file systems.
Corresponding #GFileAttributeType is %G_FILE_ATTRIBUTE_TYPE_UINT32.
A key in the "unix" namespace for getting the device id of the device the
file is located on (see stat() documentation). This attribute is only
available for UNIX file systems. Corresponding #GFileAttributeType is
%G_FILE_ATTRIBUTE_TYPE_UINT32.
A key in the "unix" namespace for getting the group ID for the file.
This attribute is only available for UNIX file systems.
Corresponding #GFileAttributeType is %G_FILE_ATTRIBUTE_TYPE_UINT32.
A key in the "unix" namespace for getting the inode of the file.
This attribute is only available for UNIX file systems. Corresponding
#GFileAttributeType is %G_FILE_ATTRIBUTE_TYPE_UINT64.
A key in the "unix" namespace for checking if the file represents a
UNIX mount point. This attribute is %TRUE if the file is a UNIX mount
point. This attribute is only available for UNIX file systems.
Corresponding #GFileAttributeType is %G_FILE_ATTRIBUTE_TYPE_BOOLEAN.
A key in the "unix" namespace for getting the mode of the file
(e.g. whether the file is a regular file, symlink, etc). See lstat()
documentation. This attribute is only available for UNIX file systems.
Corresponding #GFileAttributeType is %G_FILE_ATTRIBUTE_TYPE_UINT32.
A key in the "unix" namespace for getting the number of hard links
for a file. See lstat() documentation. This attribute is only available
for UNIX file systems. Corresponding #GFileAttributeType is
%G_FILE_ATTRIBUTE_TYPE_UINT32.
A key in the "unix" namespace for getting the device ID for the file
(if it is a special file). See lstat() documentation. This attribute
is only available for UNIX file systems. Corresponding #GFileAttributeType
is %G_FILE_ATTRIBUTE_TYPE_UINT32.
A key in the "unix" namespace for getting the user ID for the file.
This attribute is only available for UNIX file systems.
Corresponding #GFileAttributeType is %G_FILE_ATTRIBUTE_TYPE_UINT32.
#GFile is a high level abstraction for manipulating files on a
virtual file system. #GFiles are lightweight, immutable objects
that do no I/O upon creation. It is necessary to understand that
#GFile objects do not represent files, merely an identifier for a
file. All file content I/O is implemented as streaming operations
(see #GInputStream and #GOutputStream).
To construct a #GFile, you can use:
<simplelist>
<member>g_file_new_for_path() if you have a path.</member>
<member>g_file_new_for_uri() if you have a URI.</member>
<member>g_file_new_for_commandline_arg() for a command line argument.</member>
<member>g_file_new_tmp() to create a temporary file from a template.</member>
<member>g_file_parse_name() from a UTF-8 string gotten from g_file_get_parse_name().</member>
</simplelist>
One way to think of a #GFile is as an abstraction of a pathname. For
normal files the system pathname is what is stored internally, but as
#GFiles are extensible it could also be something else that corresponds
to a pathname in a userspace implementation of a filesystem.
#GFiles make up hierarchies of directories and files that correspond to
the files on a filesystem. You can move through the file system with
#GFile using g_file_get_parent() to get an identifier for the parent
directory, g_file_get_child() to get a child within a directory,
g_file_resolve_relative_path() to resolve a relative path between two
#GFiles. There can be multiple hierarchies, so you may not end up at
the same root if you repeatedly call g_file_get_parent() on two different
files.
All #GFiles have a basename (get with g_file_get_basename()). These names
are byte strings that are used to identify the file on the filesystem
(relative to its parent directory) and there is no guarantees that they
have any particular charset encoding or even make any sense at all. If
you want to use filenames in a user interface you should use the display
name that you can get by requesting the
%G_FILE_ATTRIBUTE_STANDARD_DISPLAY_NAME attribute with g_file_query_info().
This is guaranteed to be in UTF-8 and can be used in a user interface.
But always store the real basename or the #GFile to use to actually
access the file, because there is no way to go from a display name to
the actual name.
Using #GFile as an identifier has the same weaknesses as using a path
in that there may be multiple aliases for the same file. For instance,
hard or soft links may cause two different #GFiles to refer to the same
file. Other possible causes for aliases are: case insensitive filesystems,
short and long names on FAT/NTFS, or bind mounts in Linux. If you want to
check if two #GFiles point to the same file you can query for the
%G_FILE_ATTRIBUTE_ID_FILE attribute. Note that #GFile does some trivial
canonicalization of pathnames passed in, so that trivial differences in
the path string used at creation (duplicated slashes, slash at end of
path, "." or ".." path segments, etc) does not create different #GFiles.
Many #GFile operations have both synchronous and asynchronous versions
to suit your application. Asynchronous versions of synchronous functions
simply have _async() appended to their function names. The asynchronous
I/O functions call a #GAsyncReadyCallback which is then used to finalize
the operation, producing a GAsyncResult which is then passed to the
function's matching _finish() operation.
Some #GFile operations do not have synchronous analogs, as they may
take a very long time to finish, and blocking may leave an application
unusable. Notable cases include:
<simplelist>
<member>g_file_mount_mountable() to mount a mountable file.</member>
<member>g_file_unmount_mountable_with_operation() to unmount a mountable file.</member>
<member>g_file_eject_mountable_with_operation() to eject a mountable file.</member>
</simplelist>
<para id="gfile-etag"><indexterm><primary>entity tag</primary></indexterm>
One notable feature of #GFiles are entity tags, or "etags" for
short. Entity tags are somewhat like a more abstract version of the
traditional mtime, and can be used to quickly determine if the file has
been modified from the version on the file system. See the HTTP 1.1
<ulink url="http://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html">specification</ulink>
for HTTP Etag headers, which are a very similar concept.
</para>
Creates a #GFile with the given argument from the command line.
The value of @arg can be either a URI, an absolute path or a
relative path resolved relative to the current working directory.
This operation never fails, but the returned object might not
support any I/O operation if @arg points to a malformed path.
a new #GFile. Free the returned object with g_object_unref().
a command line string
Creates a #GFile with the given argument from the command line.
This function is similar to g_file_new_for_commandline_arg() except
that it allows for passing the current working directory as an
argument instead of using the current working directory of the
process.
This is useful if the commandline argument was given in a context
other than the invocation of the current process.
See also g_application_command_line_create_file_for_arg().
a new #GFile
a command line string
the current working directory of the commandline
Constructs a #GFile for a given path. This operation never
fails, but the returned object might not support any I/O
operation if @path is malformed.
a new #GFile for the given @path. Free the returned object with g_object_unref().
a string containing a relative or absolute path. The string must be encoded in the glib filename encoding.
Constructs a #GFile for a given URI. This operation never
fails, but the returned object might not support any I/O
operation if @uri is malformed or if the uri type is
not supported.
a new #GFile for the given @uri. Free the returned object with g_object_unref().
a UTF-8 string containing a URI
Opens a file in the preferred directory for temporary files (as
returned by g_get_tmp_dir()) and returns a #GFile and
#GFileIOStream pointing to it.
@tmpl should be a string in the GLib file name encoding
containing a sequence of six 'X' characters, and containing no
directory components. If it is %NULL, a default template is used.
Unlike the other #GFile constructors, this will return %NULL if
a temporary file could not be created.
a new #GFile. Free the returned object with g_object_unref().
Template for the file name, as in g_file_open_tmp(), or %NULL for a default template
on return, a #GFileIOStream for the created file
Constructs a #GFile with the given @parse_name (i.e. something
given by g_file_get_parse_name()). This operation never fails,
but the returned object might not support any I/O operation if
the @parse_name cannot be parsed.
a new #GFile.
a file name or path to be parsed
Gets an output stream for appending data to the file.
If the file doesn't already exist it is created.
By default files created are generally readable by everyone,
but if you pass #G_FILE_CREATE_PRIVATE in @flags the file
will be made readable only to the current user, to the level that
is supported on the target filesystem.
If @cancellable is not %NULL, then the operation can be cancelled
by triggering the cancellable object from another thread. If the
operation was cancelled, the error %G_IO_ERROR_CANCELLED will be
returned.
Some file systems don't allow all file names, and may return an
%G_IO_ERROR_INVALID_FILENAME error. If the file is a directory the
%G_IO_ERROR_IS_DIRECTORY error will be returned. Other errors are
possible too, and depend on what kind of filesystem the file is on.
a #GFileOutputStream, or %NULL on error. Free the returned object with g_object_unref().
a set of #GFileCreateFlags
optional #GCancellable object, %NULL to ignore
Asynchronously opens @file for appending.
For more details, see g_file_append_to() which is
the synchronous version of this call.
When the operation is finished, @callback will be called.
You can then call g_file_append_to_finish() to get the result
of the operation.
a set of #GFileCreateFlags
the <link linkend="io-priority">I/O priority</link> of the request
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
Finishes an asynchronous file append operation started with
g_file_append_to_async().
a valid #GFileOutputStream or %NULL on error. Free the returned object with g_object_unref().
#GAsyncResult
Copies the file @source to the location specified by @destination.
Can not handle recursive copies of directories.
If the flag #G_FILE_COPY_OVERWRITE is specified an already
existing @destination file is overwritten.
If the flag #G_FILE_COPY_NOFOLLOW_SYMLINKS is specified then symlinks
will be copied as symlinks, otherwise the target of the
@source symlink will be copied.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
If @progress_callback is not %NULL, then the operation can be monitored
by setting this to a #GFileProgressCallback function.
@progress_callback_data will be passed to this function. It is guaranteed
that this callback will be called after all data has been transferred with
the total number of bytes copied during the operation.
If the @source file does not exist, then the %G_IO_ERROR_NOT_FOUND error
is returned, independent on the status of the @destination.
If #G_FILE_COPY_OVERWRITE is not specified and the target exists, then
the error %G_IO_ERROR_EXISTS is returned.
If trying to overwrite a file over a directory, the %G_IO_ERROR_IS_DIRECTORY
error is returned. If trying to overwrite a directory with a directory the
%G_IO_ERROR_WOULD_MERGE error is returned.
If the source is a directory and the target does not exist, or
#G_FILE_COPY_OVERWRITE is specified and the target is a file, then the
%G_IO_ERROR_WOULD_RECURSE error is returned.
If you are interested in copying the #GFile object itself (not the on-disk
file), see g_file_dup().
%TRUE on success, %FALSE otherwise.
destination #GFile
set of #GFileCopyFlags
optional #GCancellable object, %NULL to ignore
function to callback with progress information, or %NULL if progress information is not needed
user data to pass to @progress_callback
Copies the file @source to the location specified by @destination
asynchronously. For details of the behaviour, see g_file_copy().
If @progress_callback is not %NULL, then that function that will be called
just like in g_file_copy(), however the callback will run in the main loop,
not in the thread that is doing the I/O operation.
When the operation is finished, @callback will be called. You can then call
g_file_copy_finish() to get the result of the operation.
destination #GFile
set of #GFileCopyFlags
the <link linkend="io-priority">I/O priority</link> of the request
optional #GCancellable object, %NULL to ignore
function to callback with progress information, or %NULL if progress information is not needed
user data to pass to @progress_callback
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
Finishes copying the file started with g_file_copy_async().
a %TRUE on success, %FALSE on error.
a #GAsyncResult
Creates a new file and returns an output stream for writing to it.
The file must not already exist.
By default files created are generally readable by everyone,
but if you pass #G_FILE_CREATE_PRIVATE in @flags the file
will be made readable only to the current user, to the level
that is supported on the target filesystem.
If @cancellable is not %NULL, then the operation can be cancelled
by triggering the cancellable object from another thread. If the
operation was cancelled, the error %G_IO_ERROR_CANCELLED will be
returned.
If a file or directory with this name already exists the
%G_IO_ERROR_EXISTS error will be returned. Some file systems don't
allow all file names, and may return an %G_IO_ERROR_INVALID_FILENAME
error, and if the name is to long %G_IO_ERROR_FILENAME_TOO_LONG will
be returned. Other errors are possible too, and depend on what kind
of filesystem the file is on.
a #GFileOutputStream for the newly created file, or %NULL on error. Free the returned object with g_object_unref().
a set of #GFileCreateFlags
optional #GCancellable object, %NULL to ignore
Asynchronously creates a new file and returns an output stream
for writing to it. The file must not already exist.
For more details, see g_file_create() which is
the synchronous version of this call.
When the operation is finished, @callback will be called.
You can then call g_file_create_finish() to get the result
of the operation.
a set of #GFileCreateFlags
the <link linkend="io-priority">I/O priority</link> of the request
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
Finishes an asynchronous file create operation started with
g_file_create_async().
a #GFileOutputStream or %NULL on error. Free the returned object with g_object_unref().
a #GAsyncResult
Creates a new file and returns a stream for reading and
writing to it. The file must not already exist.
By default files created are generally readable by everyone,
but if you pass #G_FILE_CREATE_PRIVATE in @flags the file
will be made readable only to the current user, to the level
that is supported on the target filesystem.
If @cancellable is not %NULL, then the operation can be cancelled
by triggering the cancellable object from another thread. If the
operation was cancelled, the error %G_IO_ERROR_CANCELLED will be
returned.
If a file or directory with this name already exists, the
%G_IO_ERROR_EXISTS error will be returned. Some file systems don't
allow all file names, and may return an %G_IO_ERROR_INVALID_FILENAME
error, and if the name is too long, %G_IO_ERROR_FILENAME_TOO_LONG
will be returned. Other errors are possible too, and depend on what
kind of filesystem the file is on.
Note that in many non-local file cases read and write streams are
not supported, so make sure you really need to do read and write
streaming, rather than just opening for reading or writing.
a #GFileIOStream for the newly created file, or %NULL on error. Free the returned object with g_object_unref().
a set of #GFileCreateFlags
optional #GCancellable object, %NULL to ignore
Asynchronously creates a new file and returns a stream
for reading and writing to it. The file must not already exist.
For more details, see g_file_create_readwrite() which is
the synchronous version of this call.
When the operation is finished, @callback will be called.
You can then call g_file_create_readwrite_finish() to get
the result of the operation.
a set of #GFileCreateFlags
the <link linkend="io-priority">I/O priority</link> of the request
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
Finishes an asynchronous file create operation started with
g_file_create_readwrite_async().
a #GFileIOStream or %NULL on error. Free the returned object with g_object_unref().
a #GAsyncResult
Deletes a file. If the @file is a directory, it will only be
deleted if it is empty. This has the same semantics as g_unlink().
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
%TRUE if the file was deleted. %FALSE otherwise.
optional #GCancellable object, %NULL to ignore
Asynchronously delete a file. If the @file is a directory, it will
only be deleted if it is empty. This has the same semantics as
g_unlink().
the <link linkend="io-priority">I/O priority</link> of the request
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
Finishes deleting a file started with g_file_delete_async().
%TRUE if the file was deleted. %FALSE otherwise.
a #GAsyncResult
Duplicates a #GFile handle. This operation does not duplicate
the actual file or directory represented by the #GFile; see
g_file_copy() if attempting to copy a file.
This call does no blocking I/O.
a new #GFile that is a duplicate of the given #GFile.
Starts an asynchronous eject on a mountable.
When this operation has completed, @callback will be called with
@user_user data, and the operation can be finalized with
g_file_eject_mountable_finish().
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
flags affecting the operation
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied, or %NULL
the data to pass to callback function
Finishes an asynchronous eject operation started by
g_file_eject_mountable().
%TRUE if the @file was ejected successfully. %FALSE otherwise.
a #GAsyncResult
Starts an asynchronous eject on a mountable.
When this operation has completed, @callback will be called with
@user_user data, and the operation can be finalized with
g_file_eject_mountable_with_operation_finish().
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
flags affecting the operation
a #GMountOperation, or %NULL to avoid user interaction
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied, or %NULL
the data to pass to callback function
Finishes an asynchronous eject operation started by
g_file_eject_mountable_with_operation().
%TRUE if the @file was ejected successfully. %FALSE otherwise.
a #GAsyncResult
Gets the requested information about the files in a directory.
The result is a #GFileEnumerator object that will give out
#GFileInfo objects for all the files in the directory.
The @attributes value is a string that specifies the file
attributes that should be gathered. It is not an error if
it's not possible to read a particular requested attribute
from a file - it just won't be set. @attributes should
be a comma-separated list of attributes or attribute wildcards.
The wildcard "*" means all attributes, and a wildcard like
"standard::*" means all attributes in the standard namespace.
An example attribute query be "standard::*,owner::user".
The standard attributes are available as defines, like
#G_FILE_ATTRIBUTE_STANDARD_NAME.
If @cancellable is not %NULL, then the operation can be cancelled
by triggering the cancellable object from another thread. If the
operation was cancelled, the error %G_IO_ERROR_CANCELLED will be
returned.
If the file does not exist, the %G_IO_ERROR_NOT_FOUND error will
be returned. If the file is not a directory, the %G_IO_ERROR_NOT_DIRECTORY
error will be returned. Other errors are possible too.
A #GFileEnumerator if successful, %NULL on error. Free the returned object with g_object_unref().
an attribute query string
a set of #GFileQueryInfoFlags
optional #GCancellable object, %NULL to ignore
Asynchronously gets the requested information about the files
in a directory. The result is a #GFileEnumerator object that will
give out #GFileInfo objects for all the files in the directory.
For more details, see g_file_enumerate_children() which is
the synchronous version of this call.
When the operation is finished, @callback will be called. You can
then call g_file_enumerate_children_finish() to get the result of
the operation.
an attribute query string
a set of #GFileQueryInfoFlags
the <link linkend="io-priority">I/O priority</link> of the request
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
Finishes an async enumerate children operation.
See g_file_enumerate_children_async().
a #GFileEnumerator or %NULL if an error occurred. Free the returned object with g_object_unref().
a #GAsyncResult
Checks equality of two given #GFiles.
Note that two #GFiles that differ can still refer to the same
file on the filesystem due to various forms of filename
aliasing.
This call does no blocking I/O.
%TRUE if @file1 and @file2 are equal. %FALSE if either is not a #GFile.
the second #GFile
Gets a #GMount for the #GFile.
If the #GFileIface for @file does not have a mount (e.g.
possibly a remote share), @error will be set to %G_IO_ERROR_NOT_FOUND
and %NULL will be returned.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
a #GMount where the @file is located or %NULL on error. Free the returned object with g_object_unref().
optional #GCancellable object, %NULL to ignore
Asynchronously gets the mount for the file.
For more details, see g_file_find_enclosing_mount() which is
the synchronous version of this call.
When the operation is finished, @callback will be called.
You can then call g_file_find_enclosing_mount_finish() to
get the result of the operation.
the <link linkend="io-priority">I/O priority</link> of the request
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
Finishes an asynchronous find mount request.
See g_file_find_enclosing_mount_async().
#GMount for given @file or %NULL on error. Free the returned object with g_object_unref().
a #GAsyncResult
Gets the base name (the last component of the path) for a given #GFile.
If called for the top level of a system (such as the filesystem root
or a uri like sftp://host/) it will return a single directory separator
(and on Windows, possibly a drive letter).
The base name is a byte string (not UTF-8). It has no defined encoding
or rules other than it may not contain zero bytes. If you want to use
filenames in a user interface you should use the display name that you
can get by requesting the %G_FILE_ATTRIBUTE_STANDARD_DISPLAY_NAME
attribute with g_file_query_info().
This call does no blocking I/O.
string containing the #GFile's base name, or %NULL if given #GFile is invalid. The returned string should be freed with g_free() when no longer needed.
Gets the child of @file for a given @display_name (i.e. a UTF-8
version of the name). If this function fails, it returns %NULL
and @error will be set. This is very useful when constructing a
#GFile for a new file and the user entered the filename in the
user interface, for instance when you select a directory and
type a filename in the file selector.
This call does no blocking I/O.
a #GFile to the specified child, or %NULL if the display name couldn't be converted. Free the returned object with g_object_unref().
string to a possible child
Gets the parent directory for the @file.
If the @file represents the root directory of the
file system, then %NULL will be returned.
This call does no blocking I/O.
a #GFile structure to the parent of the given #GFile or %NULL if there is no parent. Free the returned object with g_object_unref().
Gets the parse name of the @file.
A parse name is a UTF-8 string that describes the
file such that one can get the #GFile back using
g_file_parse_name().
This is generally used to show the #GFile as a nice
full-pathname kind of string in a user interface,
like in a location entry.
For local files with names that can safely be converted
to UTF-8 the pathname is used, otherwise the IRI is used
(a form of URI that allows UTF-8 characters unescaped).
This call does no blocking I/O.
a string containing the #GFile's parse name. The returned string should be freed with g_free() when no longer needed.
Gets the local pathname for #GFile, if one exists.
This call does no blocking I/O.
string containing the #GFile's path, or %NULL if no such path exists. The returned string should be freed with g_free() when no longer needed.
Gets the path for @descendant relative to @parent.
This call does no blocking I/O.
string with the relative path from @descendant to @parent, or %NULL if @descendant doesn't have @parent as prefix. The returned string should be freed with g_free() when no longer needed.
input #GFile
Gets the URI for the @file.
This call does no blocking I/O.
a string containing the #GFile's URI. The returned string should be freed with g_free() when no longer needed.
Gets the URI scheme for a #GFile.
RFC 3986 decodes the scheme as:
<programlisting>
URI = scheme ":" hier-part [ "?" query ] [ "#" fragment ]
</programlisting>
Common schemes include "file", "http", "ftp", etc.
This call does no blocking I/O.
a string containing the URI scheme for the given #GFile. The returned string should be freed with g_free() when no longer needed.
Checks to see if a #GFile has a given URI scheme.
This call does no blocking I/O.
%TRUE if #GFile's backend supports the given URI scheme, %FALSE if URI scheme is %NULL, not supported, or #GFile is invalid.
a string containing a URI scheme
Creates a hash value for a #GFile.
This call does no blocking I/O.
0 if @file is not a valid #GFile, otherwise an integer that can be used as hash value for the #GFile. This function is intended for easily hashing a #GFile to add to a #GHashTable or similar data structure.
Checks to see if a file is native to the platform.
A native file s one expressed in the platform-native filename format,
e.g. "C:\Windows" or "/usr/bin/". This does not mean the file is local,
as it might be on a locally mounted remote filesystem.
On some systems non-native files may be available using the native
filesystem via a userspace filesystem (FUSE), in these cases this call
will return %FALSE, but g_file_get_path() will still return a native path.
This call does no blocking I/O.
%TRUE if @file is native
Creates a directory. Note that this will only create a child directory
of the immediate parent directory of the path or URI given by the #GFile.
To recursively create directories, see g_file_make_directory_with_parents().
This function will fail if the parent directory does not exist, setting
@error to %G_IO_ERROR_NOT_FOUND. If the file system doesn't support
creating directories, this function will fail, setting @error to
%G_IO_ERROR_NOT_SUPPORTED.
For a local #GFile the newly created directory will have the default
(current) ownership and permissions of the current process.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
%TRUE on successful creation, %FALSE otherwise.
optional #GCancellable object, %NULL to ignore
Asynchronously creates a directory.
the <link linkend="io-priority">I/O priority</link> of the request
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
Finishes an asynchronous directory creation, started with
g_file_make_directory_async().
%TRUE on successful directory creation, %FALSE otherwise.
a #GAsyncResult
Creates a symbolic link named @file which contains the string
@symlink_value.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
%TRUE on the creation of a new symlink, %FALSE otherwise.
a string with the path for the target of the new symlink
optional #GCancellable object, %NULL to ignore
Recursively measures the disk usage of @file.
This is essentially an analog of the '<literal>du</literal>' command,
but it also reports the number of directories and non-directory files
encountered (including things like symbolic links).
By default, errors are only reported against the toplevel file
itself. Errors found while recursing are silently ignored, unless
%G_FILE_DISK_USAGE_REPORT_ALL_ERRORS is given in @flags.
The returned size, @disk_usage, is in bytes and should be formatted
with g_format_size() in order to get something reasonable for showing
in a user interface.
@progress_callback and @progress_data can be given to request
periodic progress updates while scanning. See the documentation for
#GFileMeasureProgressCallback for information about when and how the
callback will be invoked.
%TRUE if successful, with the out parameters set. %FALSE otherwise, with @error set.
#GFileMeasureFlags
optional #GCancellable
a #GFileMeasureProgressCallback
user_data for @progress_callback
the number of bytes of disk space used
the number of directories encountered
the number of non-directories encountered
Recursively measures the disk usage of @file.
This is the asynchronous version of g_file_measure_disk_usage(). See
there for more information.
#GFileMeasureFlags
the <link linkend="io-priority">I/O priority</link> of the request
optional #GCancellable
a #GFileMeasureProgressCallback
user_data for @progress_callback
a #GAsyncReadyCallback to call when complete
the data to pass to callback function
Collects the results from an earlier call to
g_file_measure_disk_usage_async(). See g_file_measure_disk_usage() for
more information.
%TRUE if successful, with the out parameters set. %FALSE otherwise, with @error set.
the #GAsyncResult passed to your #GAsyncReadyCallback
the number of bytes of disk space used
the number of directories encountered
the number of non-directories encountered
Obtains a directory monitor for the given file.
This may fail if directory monitoring is not supported.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
It does not make sense for @flags to contain
%G_FILE_MONITOR_WATCH_HARD_LINKS, since hard links can not be made to
directories. It is not possible to monitor all the files in a
directory for changes made via hard links; if you want to do this then
you must register individual watches with g_file_monitor().
a #GFileMonitor for the given @file, or %NULL on error. Free the returned object with g_object_unref().
a set of #GFileMonitorFlags
optional #GCancellable object, %NULL to ignore
Obtains a file monitor for the given file. If no file notification
mechanism exists, then regular polling of the file is used.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
If @flags contains %G_FILE_MONITOR_WATCH_HARD_LINKS then the monitor
will also attempt to report changes made to the file via another
filename (ie, a hard link). Without this flag, you can only rely on
changes made through the filename contained in @file to be
reported. Using this flag may result in an increase in resource
usage, and may not have any effect depending on the #GFileMonitor
backend and/or filesystem type.
a #GFileMonitor for the given @file, or %NULL on error. Free the returned object with g_object_unref().
a set of #GFileMonitorFlags
optional #GCancellable object, %NULL to ignore
Starts a @mount_operation, mounting the volume that contains
the file @location.
When this operation has completed, @callback will be called with
@user_user data, and the operation can be finalized with
g_file_mount_enclosing_volume_finish().
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
flags affecting the operation
a #GMountOperation or %NULL to avoid user interaction
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied, or %NULL
the data to pass to callback function
Finishes a mount operation started by g_file_mount_enclosing_volume().
%TRUE if successful. If an error has occurred, this function will return %FALSE and set @error appropriately if present.
a #GAsyncResult
Mounts a file of type G_FILE_TYPE_MOUNTABLE.
Using @mount_operation, you can request callbacks when, for instance,
passwords are needed during authentication.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
When the operation is finished, @callback will be called.
You can then call g_file_mount_mountable_finish() to get
the result of the operation.
flags affecting the operation
a #GMountOperation, or %NULL to avoid user interaction
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied, or %NULL
the data to pass to callback function
Finishes a mount operation. See g_file_mount_mountable() for details.
Finish an asynchronous mount operation that was started
with g_file_mount_mountable().
a #GFile or %NULL on error. Free the returned object with g_object_unref().
a #GAsyncResult
Tries to move the file or directory @source to the location specified
by @destination. If native move operations are supported then this is
used, otherwise a copy + delete fallback is used. The native
implementation may support moving directories (for instance on moves
inside the same filesystem), but the fallback code does not.
If the flag #G_FILE_COPY_OVERWRITE is specified an already
existing @destination file is overwritten.
If the flag #G_FILE_COPY_NOFOLLOW_SYMLINKS is specified then symlinks
will be copied as symlinks, otherwise the target of the
@source symlink will be copied.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
If @progress_callback is not %NULL, then the operation can be monitored
by setting this to a #GFileProgressCallback function.
@progress_callback_data will be passed to this function. It is
guaranteed that this callback will be called after all data has been
transferred with the total number of bytes copied during the operation.
If the @source file does not exist, then the %G_IO_ERROR_NOT_FOUND
error is returned, independent on the status of the @destination.
If #G_FILE_COPY_OVERWRITE is not specified and the target exists,
then the error %G_IO_ERROR_EXISTS is returned.
If trying to overwrite a file over a directory, the %G_IO_ERROR_IS_DIRECTORY
error is returned. If trying to overwrite a directory with a directory the
%G_IO_ERROR_WOULD_MERGE error is returned.
If the source is a directory and the target does not exist, or
#G_FILE_COPY_OVERWRITE is specified and the target is a file, then
the %G_IO_ERROR_WOULD_RECURSE error may be returned (if the native
move operation isn't available).
%TRUE on successful move, %FALSE otherwise.
#GFile pointing to the destination location
set of #GFileCopyFlags
optional #GCancellable object, %NULL to ignore
#GFileProgressCallback function for updates
gpointer to user data for the callback function
Opens an existing file for reading and writing. The result is
a #GFileIOStream that can be used to read and write the contents
of the file.
If @cancellable is not %NULL, then the operation can be cancelled
by triggering the cancellable object from another thread. If the
operation was cancelled, the error %G_IO_ERROR_CANCELLED will be
returned.
If the file does not exist, the %G_IO_ERROR_NOT_FOUND error will
be returned. If the file is a directory, the %G_IO_ERROR_IS_DIRECTORY
error will be returned. Other errors are possible too, and depend on
what kind of filesystem the file is on. Note that in many non-local
file cases read and write streams are not supported, so make sure you
really need to do read and write streaming, rather than just opening
for reading or writing.
#GFileIOStream or %NULL on error. Free the returned object with g_object_unref().
a #GCancellable
Asynchronously opens @file for reading and writing.
For more details, see g_file_open_readwrite() which is
the synchronous version of this call.
When the operation is finished, @callback will be called.
You can then call g_file_open_readwrite_finish() to get
the result of the operation.
the <link linkend="io-priority">I/O priority</link> of the request
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
Finishes an asynchronous file read operation started with
g_file_open_readwrite_async().
a #GFileIOStream or %NULL on error. Free the returned object with g_object_unref().
a #GAsyncResult
Polls a file of type #G_FILE_TYPE_MOUNTABLE.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
When the operation is finished, @callback will be called.
You can then call g_file_mount_mountable_finish() to get
the result of the operation.
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied, or %NULL
the data to pass to callback function
Finishes a poll operation. See g_file_poll_mountable() for details.
Finish an asynchronous poll operation that was polled
with g_file_poll_mountable().
%TRUE if the operation finished successfully. %FALSE otherwise.
a #GAsyncResult
Checks whether @file has the prefix specified by @prefix.
In other words, if the names of initial elements of @file's
pathname match @prefix. Only full pathname elements are matched,
so a path like /foo is not considered a prefix of /foobar, only
of /foo/bar.
This call does no I/O, as it works purely on names. As such it can
sometimes return %FALSE even if @file is inside a @prefix (from a
filesystem point of view), because the prefix of @file is an alias
of @prefix.
%TRUE if the @files's parent, grandparent, etc is @prefix, %FALSE otherwise.
input #GFile
Similar to g_file_query_info(), but obtains information
about the filesystem the @file is on, rather than the file itself.
For instance the amount of space available and the type of
the filesystem.
The @attributes value is a string that specifies the attributes
that should be gathered. It is not an error if it's not possible
to read a particular requested attribute from a file - it just
won't be set. @attributes should be a comma-separated list of
attributes or attribute wildcards. The wildcard "*" means all
attributes, and a wildcard like "filesystem::*" means all attributes
in the filesystem namespace. The standard namespace for filesystem
attributes is "filesystem". Common attributes of interest are
#G_FILE_ATTRIBUTE_FILESYSTEM_SIZE (the total size of the filesystem
in bytes), #G_FILE_ATTRIBUTE_FILESYSTEM_FREE (number of bytes available),
and #G_FILE_ATTRIBUTE_FILESYSTEM_TYPE (type of the filesystem).
If @cancellable is not %NULL, then the operation can be cancelled
by triggering the cancellable object from another thread. If the
operation was cancelled, the error %G_IO_ERROR_CANCELLED will be
returned.
If the file does not exist, the %G_IO_ERROR_NOT_FOUND error will
be returned. Other errors are possible too, and depend on what
kind of filesystem the file is on.
a #GFileInfo or %NULL if there was an error. Free the returned object with g_object_unref().
an attribute query string
optional #GCancellable object, %NULL to ignore
Asynchronously gets the requested information about the filesystem
that the specified @file is on. The result is a #GFileInfo object
that contains key-value attributes (such as type or size for the
file).
For more details, see g_file_query_filesystem_info() which is the
synchronous version of this call.
When the operation is finished, @callback will be called. You can
then call g_file_query_info_finish() to get the result of the
operation.
an attribute query string
the <link linkend="io-priority">I/O priority</link> of the request
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
Finishes an asynchronous filesystem info query.
See g_file_query_filesystem_info_async().
#GFileInfo for given @file or %NULL on error. Free the returned object with g_object_unref().
a #GAsyncResult
Gets the requested information about specified @file.
The result is a #GFileInfo object that contains key-value
attributes (such as the type or size of the file).
The @attributes value is a string that specifies the file
attributes that should be gathered. It is not an error if
it's not possible to read a particular requested attribute
from a file - it just won't be set. @attributes should be a
comma-separated list of attributes or attribute wildcards.
The wildcard "*" means all attributes, and a wildcard like
"standard::*" means all attributes in the standard namespace.
An example attribute query be "standard::*,owner::user".
The standard attributes are available as defines, like
#G_FILE_ATTRIBUTE_STANDARD_NAME.
If @cancellable is not %NULL, then the operation can be cancelled
by triggering the cancellable object from another thread. If the
operation was cancelled, the error %G_IO_ERROR_CANCELLED will be
returned.
For symlinks, normally the information about the target of the
symlink is returned, rather than information about the symlink
itself. However if you pass #G_FILE_QUERY_INFO_NOFOLLOW_SYMLINKS
in @flags the information about the symlink itself will be returned.
Also, for symlinks that point to non-existing files the information
about the symlink itself will be returned.
If the file does not exist, the %G_IO_ERROR_NOT_FOUND error will be
returned. Other errors are possible too, and depend on what kind of
filesystem the file is on.
a #GFileInfo for the given @file, or %NULL on error. Free the returned object with g_object_unref().
an attribute query string
a set of #GFileQueryInfoFlags
optional #GCancellable object, %NULL to ignore
Asynchronously gets the requested information about specified @file.
The result is a #GFileInfo object that contains key-value attributes
(such as type or size for the file).
For more details, see g_file_query_info() which is the synchronous
version of this call.
When the operation is finished, @callback will be called. You can
then call g_file_query_info_finish() to get the result of the operation.
an attribute query string
a set of #GFileQueryInfoFlags
the <link linkend="io-priority">I/O priority</link> of the request
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
Finishes an asynchronous file info query.
See g_file_query_info_async().
#GFileInfo for given @file or %NULL on error. Free the returned object with g_object_unref().
a #GAsyncResult
Obtain the list of settable attributes for the file.
Returns the type and full attribute name of all the attributes
that can be set on this file. This doesn't mean setting it will
always succeed though, you might get an access failure, or some
specific file may not support a specific attribute.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
a #GFileAttributeInfoList describing the settable attributes. When you are done with it, release it with g_file_attribute_info_list_unref()
optional #GCancellable object, %NULL to ignore
Obtain the list of attribute namespaces where new attributes
can be created by a user. An example of this is extended
attributes (in the "xattr" namespace).
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
a #GFileAttributeInfoList describing the writable namespaces. When you are done with it, release it with g_file_attribute_info_list_unref()
optional #GCancellable object, %NULL to ignore
Asynchronously opens @file for reading.
For more details, see g_file_read() which is
the synchronous version of this call.
When the operation is finished, @callback will be called.
You can then call g_file_read_finish() to get the result
of the operation.
the <link linkend="io-priority">I/O priority</link> of the request
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
Finishes an asynchronous file read operation started with
g_file_read_async().
a #GFileInputStream or %NULL on error. Free the returned object with g_object_unref().
a #GAsyncResult
Opens a file for reading. The result is a #GFileInputStream that
can be used to read the contents of the file.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
If the file does not exist, the %G_IO_ERROR_NOT_FOUND error will be
returned. If the file is a directory, the %G_IO_ERROR_IS_DIRECTORY
error will be returned. Other errors are possible too, and depend
on what kind of filesystem the file is on.
#GFileInputStream or %NULL on error. Free the returned object with g_object_unref().
a #GCancellable
Returns an output stream for overwriting the file, possibly
creating a backup copy of the file first. If the file doesn't exist,
it will be created.
This will try to replace the file in the safest way possible so
that any errors during the writing will not affect an already
existing copy of the file. For instance, for local files it
may write to a temporary file and then atomically rename over
the destination when the stream is closed.
By default files created are generally readable by everyone,
but if you pass #G_FILE_CREATE_PRIVATE in @flags the file
will be made readable only to the current user, to the level that
is supported on the target filesystem.
If @cancellable is not %NULL, then the operation can be cancelled
by triggering the cancellable object from another thread. If the
operation was cancelled, the error %G_IO_ERROR_CANCELLED will be
returned.
If you pass in a non-%NULL @etag value, then this value is
compared to the current entity tag of the file, and if they differ
an %G_IO_ERROR_WRONG_ETAG error is returned. This generally means
that the file has been changed since you last read it. You can get
the new etag from g_file_output_stream_get_etag() after you've
finished writing and closed the #GFileOutputStream. When you load
a new file you can use g_file_input_stream_query_info() to get
the etag of the file.
If @make_backup is %TRUE, this function will attempt to make a
backup of the current file before overwriting it. If this fails
a %G_IO_ERROR_CANT_CREATE_BACKUP error will be returned. If you
want to replace anyway, try again with @make_backup set to %FALSE.
If the file is a directory the %G_IO_ERROR_IS_DIRECTORY error will
be returned, and if the file is some other form of non-regular file
then a %G_IO_ERROR_NOT_REGULAR_FILE error will be returned. Some
file systems don't allow all file names, and may return an
%G_IO_ERROR_INVALID_FILENAME error, and if the name is to long
%G_IO_ERROR_FILENAME_TOO_LONG will be returned. Other errors are
possible too, and depend on what kind of filesystem the file is on.
a #GFileOutputStream or %NULL on error. Free the returned object with g_object_unref().
an optional <link linkend="gfile-etag">entity tag</link> for the current #GFile, or #NULL to ignore
%TRUE if a backup should be created
a set of #GFileCreateFlags
optional #GCancellable object, %NULL to ignore
Asynchronously overwrites the file, replacing the contents,
possibly creating a backup copy of the file first.
For more details, see g_file_replace() which is
the synchronous version of this call.
When the operation is finished, @callback will be called.
You can then call g_file_replace_finish() to get the result
of the operation.
an <link linkend="gfile-etag">entity tag</link> for the current #GFile, or NULL to ignore
%TRUE if a backup should be created
a set of #GFileCreateFlags
the <link linkend="io-priority">I/O priority</link> of the request
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
Finishes an asynchronous file replace operation started with
g_file_replace_async().
a #GFileOutputStream, or %NULL on error. Free the returned object with g_object_unref().
a #GAsyncResult
Returns an output stream for overwriting the file in readwrite mode,
possibly creating a backup copy of the file first. If the file doesn't
exist, it will be created.
For details about the behaviour, see g_file_replace() which does the
same thing but returns an output stream only.
Note that in many non-local file cases read and write streams are not
supported, so make sure you really need to do read and write streaming,
rather than just opening for reading or writing.
a #GFileIOStream or %NULL on error. Free the returned object with g_object_unref().
an optional <link linkend="gfile-etag">entity tag</link> for the current #GFile, or #NULL to ignore
%TRUE if a backup should be created
a set of #GFileCreateFlags
optional #GCancellable object, %NULL to ignore
Asynchronously overwrites the file in read-write mode,
replacing the contents, possibly creating a backup copy
of the file first.
For more details, see g_file_replace_readwrite() which is
the synchronous version of this call.
When the operation is finished, @callback will be called.
You can then call g_file_replace_readwrite_finish() to get
the result of the operation.
an <link linkend="gfile-etag">entity tag</link> for the current #GFile, or NULL to ignore
%TRUE if a backup should be created
a set of #GFileCreateFlags
the <link linkend="io-priority">I/O priority</link> of the request
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
Finishes an asynchronous file replace operation started with
g_file_replace_readwrite_async().
a #GFileIOStream, or %NULL on error. Free the returned object with g_object_unref().
a #GAsyncResult
Resolves a relative path for @file to an absolute path.
This call does no blocking I/O.
#GFile to the resolved path. %NULL if @relative_path is %NULL or if @file is invalid. Free the returned object with g_object_unref().
a given relative path string
Sets an attribute in the file with attribute name @attribute to @value.
Some attributes can be unset by setting @attribute to
%G_FILE_ATTRIBUTE_TYPE_INVALID and @value_p to %NULL.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
%TRUE if the attribute was set, %FALSE otherwise.
a string containing the attribute's name
The type of the attribute
a pointer to the value (or the pointer itself if the type is a pointer type)
a set of #GFileQueryInfoFlags
optional #GCancellable object, %NULL to ignore
Asynchronously sets the attributes of @file with @info.
For more details, see g_file_set_attributes_from_info(),
which is the synchronous version of this call.
When the operation is finished, @callback will be called.
You can then call g_file_set_attributes_finish() to get
the result of the operation.
a #GFileInfo
a #GFileQueryInfoFlags
the <link linkend="io-priority">I/O priority</link> of the request
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback
a #gpointer
Finishes setting an attribute started in g_file_set_attributes_async().
%TRUE if the attributes were set correctly, %FALSE otherwise.
a #GAsyncResult
a #GFileInfo
Tries to set all attributes in the #GFileInfo on the target
values, not stopping on the first error.
If there is any error during this operation then @error will
be set to the first error. Error on particular fields are flagged
by setting the "status" field in the attribute value to
%G_FILE_ATTRIBUTE_STATUS_ERROR_SETTING, which means you can
also detect further errors.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
%FALSE if there was any error, %TRUE otherwise.
a #GFileInfo
#GFileQueryInfoFlags
optional #GCancellable object, %NULL to ignore
Renames @file to the specified display name.
The display name is converted from UTF-8 to the correct encoding
for the target filesystem if possible and the @file is renamed to this.
If you want to implement a rename operation in the user interface the
edit name (#G_FILE_ATTRIBUTE_STANDARD_EDIT_NAME) should be used as the
initial value in the rename widget, and then the result after editing
should be passed to g_file_set_display_name().
On success the resulting converted filename is returned.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
a #GFile specifying what @file was renamed to, or %NULL if there was an error. Free the returned object with g_object_unref().
a string
optional #GCancellable object, %NULL to ignore
Asynchronously sets the display name for a given #GFile.
For more details, see g_file_set_display_name() which is
the synchronous version of this call.
When the operation is finished, @callback will be called.
You can then call g_file_set_display_name_finish() to get
the result of the operation.
a string
the <link linkend="io-priority">I/O priority</link> of the request
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
Finishes setting a display name started with
g_file_set_display_name_async().
a #GFile or %NULL on error. Free the returned object with g_object_unref().
a #GAsyncResult
Starts a file of type #G_FILE_TYPE_MOUNTABLE.
Using @start_operation, you can request callbacks when, for instance,
passwords are needed during authentication.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
When the operation is finished, @callback will be called.
You can then call g_file_mount_mountable_finish() to get
the result of the operation.
flags affecting the operation
a #GMountOperation, or %NULL to avoid user interaction
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied, or %NULL
the data to pass to callback function
Finishes a start operation. See g_file_start_mountable() for details.
Finish an asynchronous start operation that was started
with g_file_start_mountable().
%TRUE if the operation finished successfully. %FALSE otherwise.
a #GAsyncResult
Stops a file of type #G_FILE_TYPE_MOUNTABLE.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
When the operation is finished, @callback will be called.
You can then call g_file_stop_mountable_finish() to get
the result of the operation.
flags affecting the operation
a #GMountOperation, or %NULL to avoid user interaction.
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied, or %NULL
the data to pass to callback function
Finishes an stop operation, see g_file_stop_mountable() for details.
Finish an asynchronous stop operation that was started
with g_file_stop_mountable().
%TRUE if the operation finished successfully. %FALSE otherwise.
a #GAsyncResult
Sends @file to the "Trashcan", if possible. This is similar to
deleting it, but the user can recover it before emptying the trashcan.
Not all file systems support trashing, so this call can return the
%G_IO_ERROR_NOT_SUPPORTED error.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
%TRUE on successful trash, %FALSE otherwise.
optional #GCancellable object, %NULL to ignore
Asynchronously sends @file to the Trash location, if possible.
the <link linkend="io-priority">I/O priority</link> of the request
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
Finishes an asynchronous file trashing operation, started with
g_file_trash_async().
%TRUE on successful trash, %FALSE otherwise.
a #GAsyncResult
Unmounts a file of type G_FILE_TYPE_MOUNTABLE.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
When the operation is finished, @callback will be called.
You can then call g_file_unmount_mountable_finish() to get
the result of the operation.
flags affecting the operation
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied, or %NULL
the data to pass to callback function
Finishes an unmount operation, see g_file_unmount_mountable() for details.
Finish an asynchronous unmount operation that was started
with g_file_unmount_mountable().
%TRUE if the operation finished successfully. %FALSE otherwise.
a #GAsyncResult
Unmounts a file of type #G_FILE_TYPE_MOUNTABLE.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
When the operation is finished, @callback will be called.
You can then call g_file_unmount_mountable_finish() to get
the result of the operation.
flags affecting the operation
a #GMountOperation, or %NULL to avoid user interaction
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied, or %NULL
the data to pass to callback function
Finishes an unmount operation,
see g_file_unmount_mountable_with_operation() for details.
Finish an asynchronous unmount operation that was started
with g_file_unmount_mountable_with_operation().
%TRUE if the operation finished successfully. %FALSE otherwise.
a #GAsyncResult
Gets an output stream for appending data to the file.
If the file doesn't already exist it is created.
By default files created are generally readable by everyone,
but if you pass #G_FILE_CREATE_PRIVATE in @flags the file
will be made readable only to the current user, to the level that
is supported on the target filesystem.
If @cancellable is not %NULL, then the operation can be cancelled
by triggering the cancellable object from another thread. If the
operation was cancelled, the error %G_IO_ERROR_CANCELLED will be
returned.
Some file systems don't allow all file names, and may return an
%G_IO_ERROR_INVALID_FILENAME error. If the file is a directory the
%G_IO_ERROR_IS_DIRECTORY error will be returned. Other errors are
possible too, and depend on what kind of filesystem the file is on.
a #GFileOutputStream, or %NULL on error. Free the returned object with g_object_unref().
input #GFile
a set of #GFileCreateFlags
optional #GCancellable object, %NULL to ignore
Asynchronously opens @file for appending.
For more details, see g_file_append_to() which is
the synchronous version of this call.
When the operation is finished, @callback will be called.
You can then call g_file_append_to_finish() to get the result
of the operation.
input #GFile
a set of #GFileCreateFlags
the <link linkend="io-priority">I/O priority</link> of the request
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
Finishes an asynchronous file append operation started with
g_file_append_to_async().
a valid #GFileOutputStream or %NULL on error. Free the returned object with g_object_unref().
input #GFile
#GAsyncResult
Copies the file @source to the location specified by @destination.
Can not handle recursive copies of directories.
If the flag #G_FILE_COPY_OVERWRITE is specified an already
existing @destination file is overwritten.
If the flag #G_FILE_COPY_NOFOLLOW_SYMLINKS is specified then symlinks
will be copied as symlinks, otherwise the target of the
@source symlink will be copied.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
If @progress_callback is not %NULL, then the operation can be monitored
by setting this to a #GFileProgressCallback function.
@progress_callback_data will be passed to this function. It is guaranteed
that this callback will be called after all data has been transferred with
the total number of bytes copied during the operation.
If the @source file does not exist, then the %G_IO_ERROR_NOT_FOUND error
is returned, independent on the status of the @destination.
If #G_FILE_COPY_OVERWRITE is not specified and the target exists, then
the error %G_IO_ERROR_EXISTS is returned.
If trying to overwrite a file over a directory, the %G_IO_ERROR_IS_DIRECTORY
error is returned. If trying to overwrite a directory with a directory the
%G_IO_ERROR_WOULD_MERGE error is returned.
If the source is a directory and the target does not exist, or
#G_FILE_COPY_OVERWRITE is specified and the target is a file, then the
%G_IO_ERROR_WOULD_RECURSE error is returned.
If you are interested in copying the #GFile object itself (not the on-disk
file), see g_file_dup().
%TRUE on success, %FALSE otherwise.
input #GFile
destination #GFile
set of #GFileCopyFlags
optional #GCancellable object, %NULL to ignore
function to callback with progress information, or %NULL if progress information is not needed
user data to pass to @progress_callback
Copies the file @source to the location specified by @destination
asynchronously. For details of the behaviour, see g_file_copy().
If @progress_callback is not %NULL, then that function that will be called
just like in g_file_copy(), however the callback will run in the main loop,
not in the thread that is doing the I/O operation.
When the operation is finished, @callback will be called. You can then call
g_file_copy_finish() to get the result of the operation.
input #GFile
destination #GFile
set of #GFileCopyFlags
the <link linkend="io-priority">I/O priority</link> of the request
optional #GCancellable object, %NULL to ignore
function to callback with progress information, or %NULL if progress information is not needed
user data to pass to @progress_callback
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
Copies the file attributes from @source to @destination.
Normally only a subset of the file attributes are copied,
those that are copies in a normal file copy operation
(which for instance does not include e.g. owner). However
if #G_FILE_COPY_ALL_METADATA is specified in @flags, then
all the metadata that is possible to copy is copied. This
is useful when implementing move by copy + delete source.
%TRUE if the attributes were copied successfully, %FALSE otherwise.
a #GFile with attributes
a #GFile to copy attributes to
a set of #GFileCopyFlags
optional #GCancellable object, %NULL to ignore
Finishes copying the file started with g_file_copy_async().
a %TRUE on success, %FALSE on error.
input #GFile
a #GAsyncResult
Creates a new file and returns an output stream for writing to it.
The file must not already exist.
By default files created are generally readable by everyone,
but if you pass #G_FILE_CREATE_PRIVATE in @flags the file
will be made readable only to the current user, to the level
that is supported on the target filesystem.
If @cancellable is not %NULL, then the operation can be cancelled
by triggering the cancellable object from another thread. If the
operation was cancelled, the error %G_IO_ERROR_CANCELLED will be
returned.
If a file or directory with this name already exists the
%G_IO_ERROR_EXISTS error will be returned. Some file systems don't
allow all file names, and may return an %G_IO_ERROR_INVALID_FILENAME
error, and if the name is to long %G_IO_ERROR_FILENAME_TOO_LONG will
be returned. Other errors are possible too, and depend on what kind
of filesystem the file is on.
a #GFileOutputStream for the newly created file, or %NULL on error. Free the returned object with g_object_unref().
input #GFile
a set of #GFileCreateFlags
optional #GCancellable object, %NULL to ignore
Asynchronously creates a new file and returns an output stream
for writing to it. The file must not already exist.
For more details, see g_file_create() which is
the synchronous version of this call.
When the operation is finished, @callback will be called.
You can then call g_file_create_finish() to get the result
of the operation.
input #GFile
a set of #GFileCreateFlags
the <link linkend="io-priority">I/O priority</link> of the request
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
Finishes an asynchronous file create operation started with
g_file_create_async().
a #GFileOutputStream or %NULL on error. Free the returned object with g_object_unref().
input #GFile
a #GAsyncResult
Creates a new file and returns a stream for reading and
writing to it. The file must not already exist.
By default files created are generally readable by everyone,
but if you pass #G_FILE_CREATE_PRIVATE in @flags the file
will be made readable only to the current user, to the level
that is supported on the target filesystem.
If @cancellable is not %NULL, then the operation can be cancelled
by triggering the cancellable object from another thread. If the
operation was cancelled, the error %G_IO_ERROR_CANCELLED will be
returned.
If a file or directory with this name already exists, the
%G_IO_ERROR_EXISTS error will be returned. Some file systems don't
allow all file names, and may return an %G_IO_ERROR_INVALID_FILENAME
error, and if the name is too long, %G_IO_ERROR_FILENAME_TOO_LONG
will be returned. Other errors are possible too, and depend on what
kind of filesystem the file is on.
Note that in many non-local file cases read and write streams are
not supported, so make sure you really need to do read and write
streaming, rather than just opening for reading or writing.
a #GFileIOStream for the newly created file, or %NULL on error. Free the returned object with g_object_unref().
a #GFile
a set of #GFileCreateFlags
optional #GCancellable object, %NULL to ignore
Asynchronously creates a new file and returns a stream
for reading and writing to it. The file must not already exist.
For more details, see g_file_create_readwrite() which is
the synchronous version of this call.
When the operation is finished, @callback will be called.
You can then call g_file_create_readwrite_finish() to get
the result of the operation.
input #GFile
a set of #GFileCreateFlags
the <link linkend="io-priority">I/O priority</link> of the request
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
Finishes an asynchronous file create operation started with
g_file_create_readwrite_async().
a #GFileIOStream or %NULL on error. Free the returned object with g_object_unref().
input #GFile
a #GAsyncResult
Deletes a file. If the @file is a directory, it will only be
deleted if it is empty. This has the same semantics as g_unlink().
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
%TRUE if the file was deleted. %FALSE otherwise.
input #GFile
optional #GCancellable object, %NULL to ignore
Asynchronously delete a file. If the @file is a directory, it will
only be deleted if it is empty. This has the same semantics as
g_unlink().
input #GFile
the <link linkend="io-priority">I/O priority</link> of the request
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
Finishes deleting a file started with g_file_delete_async().
%TRUE if the file was deleted. %FALSE otherwise.
input #GFile
a #GAsyncResult
Duplicates a #GFile handle. This operation does not duplicate
the actual file or directory represented by the #GFile; see
g_file_copy() if attempting to copy a file.
This call does no blocking I/O.
a new #GFile that is a duplicate of the given #GFile.
input #GFile
Starts an asynchronous eject on a mountable.
When this operation has completed, @callback will be called with
@user_user data, and the operation can be finalized with
g_file_eject_mountable_finish().
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
input #GFile
flags affecting the operation
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied, or %NULL
the data to pass to callback function
Finishes an asynchronous eject operation started by
g_file_eject_mountable().
%TRUE if the @file was ejected successfully. %FALSE otherwise.
input #GFile
a #GAsyncResult
Starts an asynchronous eject on a mountable.
When this operation has completed, @callback will be called with
@user_user data, and the operation can be finalized with
g_file_eject_mountable_with_operation_finish().
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
input #GFile
flags affecting the operation
a #GMountOperation, or %NULL to avoid user interaction
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied, or %NULL
the data to pass to callback function
Finishes an asynchronous eject operation started by
g_file_eject_mountable_with_operation().
%TRUE if the @file was ejected successfully. %FALSE otherwise.
input #GFile
a #GAsyncResult
Gets the requested information about the files in a directory.
The result is a #GFileEnumerator object that will give out
#GFileInfo objects for all the files in the directory.
The @attributes value is a string that specifies the file
attributes that should be gathered. It is not an error if
it's not possible to read a particular requested attribute
from a file - it just won't be set. @attributes should
be a comma-separated list of attributes or attribute wildcards.
The wildcard "*" means all attributes, and a wildcard like
"standard::*" means all attributes in the standard namespace.
An example attribute query be "standard::*,owner::user".
The standard attributes are available as defines, like
#G_FILE_ATTRIBUTE_STANDARD_NAME.
If @cancellable is not %NULL, then the operation can be cancelled
by triggering the cancellable object from another thread. If the
operation was cancelled, the error %G_IO_ERROR_CANCELLED will be
returned.
If the file does not exist, the %G_IO_ERROR_NOT_FOUND error will
be returned. If the file is not a directory, the %G_IO_ERROR_NOT_DIRECTORY
error will be returned. Other errors are possible too.
A #GFileEnumerator if successful, %NULL on error. Free the returned object with g_object_unref().
input #GFile
an attribute query string
a set of #GFileQueryInfoFlags
optional #GCancellable object, %NULL to ignore
Asynchronously gets the requested information about the files
in a directory. The result is a #GFileEnumerator object that will
give out #GFileInfo objects for all the files in the directory.
For more details, see g_file_enumerate_children() which is
the synchronous version of this call.
When the operation is finished, @callback will be called. You can
then call g_file_enumerate_children_finish() to get the result of
the operation.
input #GFile
an attribute query string
a set of #GFileQueryInfoFlags
the <link linkend="io-priority">I/O priority</link> of the request
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
Finishes an async enumerate children operation.
See g_file_enumerate_children_async().
a #GFileEnumerator or %NULL if an error occurred. Free the returned object with g_object_unref().
input #GFile
a #GAsyncResult
Checks equality of two given #GFiles.
Note that two #GFiles that differ can still refer to the same
file on the filesystem due to various forms of filename
aliasing.
This call does no blocking I/O.
%TRUE if @file1 and @file2 are equal. %FALSE if either is not a #GFile.
the first #GFile
the second #GFile
Gets a #GMount for the #GFile.
If the #GFileIface for @file does not have a mount (e.g.
possibly a remote share), @error will be set to %G_IO_ERROR_NOT_FOUND
and %NULL will be returned.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
a #GMount where the @file is located or %NULL on error. Free the returned object with g_object_unref().
input #GFile
optional #GCancellable object, %NULL to ignore
Asynchronously gets the mount for the file.
For more details, see g_file_find_enclosing_mount() which is
the synchronous version of this call.
When the operation is finished, @callback will be called.
You can then call g_file_find_enclosing_mount_finish() to
get the result of the operation.
a #GFile
the <link linkend="io-priority">I/O priority</link> of the request
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
Finishes an asynchronous find mount request.
See g_file_find_enclosing_mount_async().
#GMount for given @file or %NULL on error. Free the returned object with g_object_unref().
a #GFile
a #GAsyncResult
Gets the base name (the last component of the path) for a given #GFile.
If called for the top level of a system (such as the filesystem root
or a uri like sftp://host/) it will return a single directory separator
(and on Windows, possibly a drive letter).
The base name is a byte string (not UTF-8). It has no defined encoding
or rules other than it may not contain zero bytes. If you want to use
filenames in a user interface you should use the display name that you
can get by requesting the %G_FILE_ATTRIBUTE_STANDARD_DISPLAY_NAME
attribute with g_file_query_info().
This call does no blocking I/O.
string containing the #GFile's base name, or %NULL if given #GFile is invalid. The returned string should be freed with g_free() when no longer needed.
input #GFile
Gets a child of @file with basename equal to @name.
Note that the file with that specific name might not exist, but
you can still have a #GFile that points to it. You can use this
for instance to create that file.
This call does no blocking I/O.
a #GFile to a child specified by @name. Free the returned object with g_object_unref().
input #GFile
string containing the child's basename
Gets the child of @file for a given @display_name (i.e. a UTF-8
version of the name). If this function fails, it returns %NULL
and @error will be set. This is very useful when constructing a
#GFile for a new file and the user entered the filename in the
user interface, for instance when you select a directory and
type a filename in the file selector.
This call does no blocking I/O.
a #GFile to the specified child, or %NULL if the display name couldn't be converted. Free the returned object with g_object_unref().
input #GFile
string to a possible child
Gets the parent directory for the @file.
If the @file represents the root directory of the
file system, then %NULL will be returned.
This call does no blocking I/O.
a #GFile structure to the parent of the given #GFile or %NULL if there is no parent. Free the returned object with g_object_unref().
input #GFile
Gets the parse name of the @file.
A parse name is a UTF-8 string that describes the
file such that one can get the #GFile back using
g_file_parse_name().
This is generally used to show the #GFile as a nice
full-pathname kind of string in a user interface,
like in a location entry.
For local files with names that can safely be converted
to UTF-8 the pathname is used, otherwise the IRI is used
(a form of URI that allows UTF-8 characters unescaped).
This call does no blocking I/O.
a string containing the #GFile's parse name. The returned string should be freed with g_free() when no longer needed.
input #GFile
Gets the local pathname for #GFile, if one exists.
This call does no blocking I/O.
string containing the #GFile's path, or %NULL if no such path exists. The returned string should be freed with g_free() when no longer needed.
input #GFile
Gets the path for @descendant relative to @parent.
This call does no blocking I/O.
string with the relative path from @descendant to @parent, or %NULL if @descendant doesn't have @parent as prefix. The returned string should be freed with g_free() when no longer needed.
input #GFile
input #GFile
Gets the URI for the @file.
This call does no blocking I/O.
a string containing the #GFile's URI. The returned string should be freed with g_free() when no longer needed.
input #GFile
Gets the URI scheme for a #GFile.
RFC 3986 decodes the scheme as:
<programlisting>
URI = scheme ":" hier-part [ "?" query ] [ "#" fragment ]
</programlisting>
Common schemes include "file", "http", "ftp", etc.
This call does no blocking I/O.
a string containing the URI scheme for the given #GFile. The returned string should be freed with g_free() when no longer needed.
input #GFile
Checks if @file has a parent, and optionally, if it is @parent.
If @parent is %NULL then this function returns %TRUE if @file has any
parent at all. If @parent is non-%NULL then %TRUE is only returned
if @file is a child of @parent.
%TRUE if @file is a child of @parent (or any parent in the case that @parent is %NULL).
input #GFile
the parent to check for, or %NULL
Checks whether @file has the prefix specified by @prefix.
In other words, if the names of initial elements of @file's
pathname match @prefix. Only full pathname elements are matched,
so a path like /foo is not considered a prefix of /foobar, only
of /foo/bar.
This call does no I/O, as it works purely on names. As such it can
sometimes return %FALSE even if @file is inside a @prefix (from a
filesystem point of view), because the prefix of @file is an alias
of @prefix.
%TRUE if the @files's parent, grandparent, etc is @prefix, %FALSE otherwise.
input #GFile
input #GFile
Checks to see if a #GFile has a given URI scheme.
This call does no blocking I/O.
%TRUE if #GFile's backend supports the given URI scheme, %FALSE if URI scheme is %NULL, not supported, or #GFile is invalid.
input #GFile
a string containing a URI scheme
Creates a hash value for a #GFile.
This call does no blocking I/O.
0 if @file is not a valid #GFile, otherwise an integer that can be used as hash value for the #GFile. This function is intended for easily hashing a #GFile to add to a #GHashTable or similar data structure.
#gconstpointer to a #GFile
Checks to see if a file is native to the platform.
A native file s one expressed in the platform-native filename format,
e.g. "C:\Windows" or "/usr/bin/". This does not mean the file is local,
as it might be on a locally mounted remote filesystem.
On some systems non-native files may be available using the native
filesystem via a userspace filesystem (FUSE), in these cases this call
will return %FALSE, but g_file_get_path() will still return a native path.
This call does no blocking I/O.
%TRUE if @file is native
input #GFile
Loads the content of the file into memory. The data is always
zero-terminated, but this is not included in the resultant @length.
The returned @content should be freed with g_free() when no longer
needed.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
%TRUE if the @file's contents were successfully loaded. %FALSE if there were errors.
input #GFile
optional #GCancellable object, %NULL to ignore
a location to place the contents of the file
a location to place the length of the contents of the file, or %NULL if the length is not needed
a location to place the current entity tag for the file, or %NULL if the entity tag is not needed
Starts an asynchronous load of the @file's contents.
For more details, see g_file_load_contents() which is
the synchronous version of this call.
When the load operation has completed, @callback will be called
with @user data. To finish the operation, call
g_file_load_contents_finish() with the #GAsyncResult returned by
the @callback.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
input #GFile
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
Finishes an asynchronous load of the @file's contents.
The contents are placed in @contents, and @length is set to the
size of the @contents string. The @content should be freed with
g_free() when no longer needed. If @etag_out is present, it will be
set to the new entity tag for the @file.
%TRUE if the load was successful. If %FALSE and @error is present, it will be set appropriately.
input #GFile
a #GAsyncResult
a location to place the contents of the file
a location to place the length of the contents of the file, or %NULL if the length is not needed
a location to place the current entity tag for the file, or %NULL if the entity tag is not needed
Reads the partial contents of a file. A #GFileReadMoreCallback should
be used to stop reading from the file when appropriate, else this
function will behave exactly as g_file_load_contents_async(). This
operation can be finished by g_file_load_partial_contents_finish().
Users of this function should be aware that @user_data is passed to
both the @read_more_callback and the @callback.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
input #GFile
optional #GCancellable object, %NULL to ignore
a #GFileReadMoreCallback to receive partial data and to specify whether further data should be read
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to the callback functions
Finishes an asynchronous partial load operation that was started
with g_file_load_partial_contents_async(). The data is always
zero-terminated, but this is not included in the resultant @length.
The returned @content should be freed with g_free() when no longer
needed.
%TRUE if the load was successful. If %FALSE and @error is present, it will be set appropriately.
input #GFile
a #GAsyncResult
a location to place the contents of the file
a location to place the length of the contents of the file, or %NULL if the length is not needed
a location to place the current entity tag for the file, or %NULL if the entity tag is not needed
Creates a directory. Note that this will only create a child directory
of the immediate parent directory of the path or URI given by the #GFile.
To recursively create directories, see g_file_make_directory_with_parents().
This function will fail if the parent directory does not exist, setting
@error to %G_IO_ERROR_NOT_FOUND. If the file system doesn't support
creating directories, this function will fail, setting @error to
%G_IO_ERROR_NOT_SUPPORTED.
For a local #GFile the newly created directory will have the default
(current) ownership and permissions of the current process.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
%TRUE on successful creation, %FALSE otherwise.
input #GFile
optional #GCancellable object, %NULL to ignore
Asynchronously creates a directory.
input #GFile
the <link linkend="io-priority">I/O priority</link> of the request
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
Finishes an asynchronous directory creation, started with
g_file_make_directory_async().
%TRUE on successful directory creation, %FALSE otherwise.
input #GFile
a #GAsyncResult
Creates a directory and any parent directories that may not
exist similar to 'mkdir -p'. If the file system does not support
creating directories, this function will fail, setting @error to
%G_IO_ERROR_NOT_SUPPORTED. If the directory itself already exists,
this function will fail setting @error to %G_IO_ERROR_EXISTS, unlike
the similar g_mkdir_with_parents().
For a local #GFile the newly created directories will have the default
(current) ownership and permissions of the current process.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
%TRUE if all directories have been successfully created, %FALSE otherwise.
input #GFile
optional #GCancellable object, %NULL to ignore
Creates a symbolic link named @file which contains the string
@symlink_value.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
%TRUE on the creation of a new symlink, %FALSE otherwise.
a #GFile with the name of the symlink to create
a string with the path for the target of the new symlink
optional #GCancellable object, %NULL to ignore
Recursively measures the disk usage of @file.
This is essentially an analog of the '<literal>du</literal>' command,
but it also reports the number of directories and non-directory files
encountered (including things like symbolic links).
By default, errors are only reported against the toplevel file
itself. Errors found while recursing are silently ignored, unless
%G_FILE_DISK_USAGE_REPORT_ALL_ERRORS is given in @flags.
The returned size, @disk_usage, is in bytes and should be formatted
with g_format_size() in order to get something reasonable for showing
in a user interface.
@progress_callback and @progress_data can be given to request
periodic progress updates while scanning. See the documentation for
#GFileMeasureProgressCallback for information about when and how the
callback will be invoked.
%TRUE if successful, with the out parameters set. %FALSE otherwise, with @error set.
a #GFile
#GFileMeasureFlags
optional #GCancellable
a #GFileMeasureProgressCallback
user_data for @progress_callback
the number of bytes of disk space used
the number of directories encountered
the number of non-directories encountered
Recursively measures the disk usage of @file.
This is the asynchronous version of g_file_measure_disk_usage(). See
there for more information.
a #GFile
#GFileMeasureFlags
the <link linkend="io-priority">I/O priority</link> of the request
optional #GCancellable
a #GFileMeasureProgressCallback
user_data for @progress_callback
a #GAsyncReadyCallback to call when complete
the data to pass to callback function
Collects the results from an earlier call to
g_file_measure_disk_usage_async(). See g_file_measure_disk_usage() for
more information.
%TRUE if successful, with the out parameters set. %FALSE otherwise, with @error set.
a #GFile
the #GAsyncResult passed to your #GAsyncReadyCallback
the number of bytes of disk space used
the number of directories encountered
the number of non-directories encountered
Obtains a file or directory monitor for the given file,
depending on the type of the file.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
a #GFileMonitor for the given @file, or %NULL on error. Free the returned object with g_object_unref().
input #GFile
a set of #GFileMonitorFlags
optional #GCancellable object, %NULL to ignore
Obtains a directory monitor for the given file.
This may fail if directory monitoring is not supported.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
It does not make sense for @flags to contain
%G_FILE_MONITOR_WATCH_HARD_LINKS, since hard links can not be made to
directories. It is not possible to monitor all the files in a
directory for changes made via hard links; if you want to do this then
you must register individual watches with g_file_monitor().
a #GFileMonitor for the given @file, or %NULL on error. Free the returned object with g_object_unref().
input #GFile
a set of #GFileMonitorFlags
optional #GCancellable object, %NULL to ignore
Obtains a file monitor for the given file. If no file notification
mechanism exists, then regular polling of the file is used.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
If @flags contains %G_FILE_MONITOR_WATCH_HARD_LINKS then the monitor
will also attempt to report changes made to the file via another
filename (ie, a hard link). Without this flag, you can only rely on
changes made through the filename contained in @file to be
reported. Using this flag may result in an increase in resource
usage, and may not have any effect depending on the #GFileMonitor
backend and/or filesystem type.
a #GFileMonitor for the given @file, or %NULL on error. Free the returned object with g_object_unref().
input #GFile
a set of #GFileMonitorFlags
optional #GCancellable object, %NULL to ignore
Starts a @mount_operation, mounting the volume that contains
the file @location.
When this operation has completed, @callback will be called with
@user_user data, and the operation can be finalized with
g_file_mount_enclosing_volume_finish().
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
input #GFile
flags affecting the operation
a #GMountOperation or %NULL to avoid user interaction
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied, or %NULL
the data to pass to callback function
Finishes a mount operation started by g_file_mount_enclosing_volume().
%TRUE if successful. If an error has occurred, this function will return %FALSE and set @error appropriately if present.
input #GFile
a #GAsyncResult
Mounts a file of type G_FILE_TYPE_MOUNTABLE.
Using @mount_operation, you can request callbacks when, for instance,
passwords are needed during authentication.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
When the operation is finished, @callback will be called.
You can then call g_file_mount_mountable_finish() to get
the result of the operation.
input #GFile
flags affecting the operation
a #GMountOperation, or %NULL to avoid user interaction
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied, or %NULL
the data to pass to callback function
Finishes a mount operation. See g_file_mount_mountable() for details.
Finish an asynchronous mount operation that was started
with g_file_mount_mountable().
a #GFile or %NULL on error. Free the returned object with g_object_unref().
input #GFile
a #GAsyncResult
Tries to move the file or directory @source to the location specified
by @destination. If native move operations are supported then this is
used, otherwise a copy + delete fallback is used. The native
implementation may support moving directories (for instance on moves
inside the same filesystem), but the fallback code does not.
If the flag #G_FILE_COPY_OVERWRITE is specified an already
existing @destination file is overwritten.
If the flag #G_FILE_COPY_NOFOLLOW_SYMLINKS is specified then symlinks
will be copied as symlinks, otherwise the target of the
@source symlink will be copied.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
If @progress_callback is not %NULL, then the operation can be monitored
by setting this to a #GFileProgressCallback function.
@progress_callback_data will be passed to this function. It is
guaranteed that this callback will be called after all data has been
transferred with the total number of bytes copied during the operation.
If the @source file does not exist, then the %G_IO_ERROR_NOT_FOUND
error is returned, independent on the status of the @destination.
If #G_FILE_COPY_OVERWRITE is not specified and the target exists,
then the error %G_IO_ERROR_EXISTS is returned.
If trying to overwrite a file over a directory, the %G_IO_ERROR_IS_DIRECTORY
error is returned. If trying to overwrite a directory with a directory the
%G_IO_ERROR_WOULD_MERGE error is returned.
If the source is a directory and the target does not exist, or
#G_FILE_COPY_OVERWRITE is specified and the target is a file, then
the %G_IO_ERROR_WOULD_RECURSE error may be returned (if the native
move operation isn't available).
%TRUE on successful move, %FALSE otherwise.
#GFile pointing to the source location
#GFile pointing to the destination location
set of #GFileCopyFlags
optional #GCancellable object, %NULL to ignore
#GFileProgressCallback function for updates
gpointer to user data for the callback function
Opens an existing file for reading and writing. The result is
a #GFileIOStream that can be used to read and write the contents
of the file.
If @cancellable is not %NULL, then the operation can be cancelled
by triggering the cancellable object from another thread. If the
operation was cancelled, the error %G_IO_ERROR_CANCELLED will be
returned.
If the file does not exist, the %G_IO_ERROR_NOT_FOUND error will
be returned. If the file is a directory, the %G_IO_ERROR_IS_DIRECTORY
error will be returned. Other errors are possible too, and depend on
what kind of filesystem the file is on. Note that in many non-local
file cases read and write streams are not supported, so make sure you
really need to do read and write streaming, rather than just opening
for reading or writing.
#GFileIOStream or %NULL on error. Free the returned object with g_object_unref().
#GFile to open
a #GCancellable
Asynchronously opens @file for reading and writing.
For more details, see g_file_open_readwrite() which is
the synchronous version of this call.
When the operation is finished, @callback will be called.
You can then call g_file_open_readwrite_finish() to get
the result of the operation.
input #GFile
the <link linkend="io-priority">I/O priority</link> of the request
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
Finishes an asynchronous file read operation started with
g_file_open_readwrite_async().
a #GFileIOStream or %NULL on error. Free the returned object with g_object_unref().
input #GFile
a #GAsyncResult
Polls a file of type #G_FILE_TYPE_MOUNTABLE.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
When the operation is finished, @callback will be called.
You can then call g_file_mount_mountable_finish() to get
the result of the operation.
input #GFile
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied, or %NULL
the data to pass to callback function
Finishes a poll operation. See g_file_poll_mountable() for details.
Finish an asynchronous poll operation that was polled
with g_file_poll_mountable().
%TRUE if the operation finished successfully. %FALSE otherwise.
input #GFile
a #GAsyncResult
Returns the #GAppInfo that is registered as the default
application to handle the file specified by @file.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
a #GAppInfo if the handle was found, %NULL if there were errors. When you are done with it, release it with g_object_unref()
a #GFile to open
optional #GCancellable object, %NULL to ignore
Utility function to check if a particular file exists. This is
implemented using g_file_query_info() and as such does blocking I/O.
Note that in many cases it is racy to first check for file existence
and then execute something based on the outcome of that, because the
file might have been created or removed in between the operations. The
general approach to handling that is to not check, but just do the
operation and handle the errors as they come.
As an example of race-free checking, take the case of reading a file,
and if it doesn't exist, creating it. There are two racy versions: read
it, and on error create it; and: check if it exists, if not create it.
These can both result in two processes creating the file (with perhaps
a partially written file as the result). The correct approach is to
always try to create the file with g_file_create() which will either
atomically create the file or fail with a %G_IO_ERROR_EXISTS error.
However, in many cases an existence check is useful in a user interface,
for instance to make a menu item sensitive/insensitive, so that you don't
have to fool users that something is possible and then just show an error
dialog. If you do this, you should make sure to also handle the errors
that can happen due to races when you execute the operation.
%TRUE if the file exists (and can be detected without error), %FALSE otherwise (or if cancelled).
input #GFile
optional #GCancellable object, %NULL to ignore
Utility function to inspect the #GFileType of a file. This is
implemented using g_file_query_info() and as such does blocking I/O.
The primary use case of this method is to check if a file is
a regular file, directory, or symlink.
The #GFileType of the file and #G_FILE_TYPE_UNKNOWN if the file does not exist
input #GFile
a set of #GFileQueryInfoFlags passed to g_file_query_info()
optional #GCancellable object, %NULL to ignore
Similar to g_file_query_info(), but obtains information
about the filesystem the @file is on, rather than the file itself.
For instance the amount of space available and the type of
the filesystem.
The @attributes value is a string that specifies the attributes
that should be gathered. It is not an error if it's not possible
to read a particular requested attribute from a file - it just
won't be set. @attributes should be a comma-separated list of
attributes or attribute wildcards. The wildcard "*" means all
attributes, and a wildcard like "filesystem::*" means all attributes
in the filesystem namespace. The standard namespace for filesystem
attributes is "filesystem". Common attributes of interest are
#G_FILE_ATTRIBUTE_FILESYSTEM_SIZE (the total size of the filesystem
in bytes), #G_FILE_ATTRIBUTE_FILESYSTEM_FREE (number of bytes available),
and #G_FILE_ATTRIBUTE_FILESYSTEM_TYPE (type of the filesystem).
If @cancellable is not %NULL, then the operation can be cancelled
by triggering the cancellable object from another thread. If the
operation was cancelled, the error %G_IO_ERROR_CANCELLED will be
returned.
If the file does not exist, the %G_IO_ERROR_NOT_FOUND error will
be returned. Other errors are possible too, and depend on what
kind of filesystem the file is on.
a #GFileInfo or %NULL if there was an error. Free the returned object with g_object_unref().
input #GFile
an attribute query string
optional #GCancellable object, %NULL to ignore
Asynchronously gets the requested information about the filesystem
that the specified @file is on. The result is a #GFileInfo object
that contains key-value attributes (such as type or size for the
file).
For more details, see g_file_query_filesystem_info() which is the
synchronous version of this call.
When the operation is finished, @callback will be called. You can
then call g_file_query_info_finish() to get the result of the
operation.
input #GFile
an attribute query string
the <link linkend="io-priority">I/O priority</link> of the request
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
Finishes an asynchronous filesystem info query.
See g_file_query_filesystem_info_async().
#GFileInfo for given @file or %NULL on error. Free the returned object with g_object_unref().
input #GFile
a #GAsyncResult
Gets the requested information about specified @file.
The result is a #GFileInfo object that contains key-value
attributes (such as the type or size of the file).
The @attributes value is a string that specifies the file
attributes that should be gathered. It is not an error if
it's not possible to read a particular requested attribute
from a file - it just won't be set. @attributes should be a
comma-separated list of attributes or attribute wildcards.
The wildcard "*" means all attributes, and a wildcard like
"standard::*" means all attributes in the standard namespace.
An example attribute query be "standard::*,owner::user".
The standard attributes are available as defines, like
#G_FILE_ATTRIBUTE_STANDARD_NAME.
If @cancellable is not %NULL, then the operation can be cancelled
by triggering the cancellable object from another thread. If the
operation was cancelled, the error %G_IO_ERROR_CANCELLED will be
returned.
For symlinks, normally the information about the target of the
symlink is returned, rather than information about the symlink
itself. However if you pass #G_FILE_QUERY_INFO_NOFOLLOW_SYMLINKS
in @flags the information about the symlink itself will be returned.
Also, for symlinks that point to non-existing files the information
about the symlink itself will be returned.
If the file does not exist, the %G_IO_ERROR_NOT_FOUND error will be
returned. Other errors are possible too, and depend on what kind of
filesystem the file is on.
a #GFileInfo for the given @file, or %NULL on error. Free the returned object with g_object_unref().
input #GFile
an attribute query string
a set of #GFileQueryInfoFlags
optional #GCancellable object, %NULL to ignore
Asynchronously gets the requested information about specified @file.
The result is a #GFileInfo object that contains key-value attributes
(such as type or size for the file).
For more details, see g_file_query_info() which is the synchronous
version of this call.
When the operation is finished, @callback will be called. You can
then call g_file_query_info_finish() to get the result of the operation.
input #GFile
an attribute query string
a set of #GFileQueryInfoFlags
the <link linkend="io-priority">I/O priority</link> of the request
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
Finishes an asynchronous file info query.
See g_file_query_info_async().
#GFileInfo for given @file or %NULL on error. Free the returned object with g_object_unref().
input #GFile
a #GAsyncResult
Obtain the list of settable attributes for the file.
Returns the type and full attribute name of all the attributes
that can be set on this file. This doesn't mean setting it will
always succeed though, you might get an access failure, or some
specific file may not support a specific attribute.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
a #GFileAttributeInfoList describing the settable attributes. When you are done with it, release it with g_file_attribute_info_list_unref()
input #GFile
optional #GCancellable object, %NULL to ignore
Obtain the list of attribute namespaces where new attributes
can be created by a user. An example of this is extended
attributes (in the "xattr" namespace).
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
a #GFileAttributeInfoList describing the writable namespaces. When you are done with it, release it with g_file_attribute_info_list_unref()
input #GFile
optional #GCancellable object, %NULL to ignore
Opens a file for reading. The result is a #GFileInputStream that
can be used to read the contents of the file.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
If the file does not exist, the %G_IO_ERROR_NOT_FOUND error will be
returned. If the file is a directory, the %G_IO_ERROR_IS_DIRECTORY
error will be returned. Other errors are possible too, and depend
on what kind of filesystem the file is on.
#GFileInputStream or %NULL on error. Free the returned object with g_object_unref().
#GFile to read
a #GCancellable
Asynchronously opens @file for reading.
For more details, see g_file_read() which is
the synchronous version of this call.
When the operation is finished, @callback will be called.
You can then call g_file_read_finish() to get the result
of the operation.
input #GFile
the <link linkend="io-priority">I/O priority</link> of the request
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
Finishes an asynchronous file read operation started with
g_file_read_async().
a #GFileInputStream or %NULL on error. Free the returned object with g_object_unref().
input #GFile
a #GAsyncResult
Returns an output stream for overwriting the file, possibly
creating a backup copy of the file first. If the file doesn't exist,
it will be created.
This will try to replace the file in the safest way possible so
that any errors during the writing will not affect an already
existing copy of the file. For instance, for local files it
may write to a temporary file and then atomically rename over
the destination when the stream is closed.
By default files created are generally readable by everyone,
but if you pass #G_FILE_CREATE_PRIVATE in @flags the file
will be made readable only to the current user, to the level that
is supported on the target filesystem.
If @cancellable is not %NULL, then the operation can be cancelled
by triggering the cancellable object from another thread. If the
operation was cancelled, the error %G_IO_ERROR_CANCELLED will be
returned.
If you pass in a non-%NULL @etag value, then this value is
compared to the current entity tag of the file, and if they differ
an %G_IO_ERROR_WRONG_ETAG error is returned. This generally means
that the file has been changed since you last read it. You can get
the new etag from g_file_output_stream_get_etag() after you've
finished writing and closed the #GFileOutputStream. When you load
a new file you can use g_file_input_stream_query_info() to get
the etag of the file.
If @make_backup is %TRUE, this function will attempt to make a
backup of the current file before overwriting it. If this fails
a %G_IO_ERROR_CANT_CREATE_BACKUP error will be returned. If you
want to replace anyway, try again with @make_backup set to %FALSE.
If the file is a directory the %G_IO_ERROR_IS_DIRECTORY error will
be returned, and if the file is some other form of non-regular file
then a %G_IO_ERROR_NOT_REGULAR_FILE error will be returned. Some
file systems don't allow all file names, and may return an
%G_IO_ERROR_INVALID_FILENAME error, and if the name is to long
%G_IO_ERROR_FILENAME_TOO_LONG will be returned. Other errors are
possible too, and depend on what kind of filesystem the file is on.
a #GFileOutputStream or %NULL on error. Free the returned object with g_object_unref().
input #GFile
an optional <link linkend="gfile-etag">entity tag</link> for the current #GFile, or #NULL to ignore
%TRUE if a backup should be created
a set of #GFileCreateFlags
optional #GCancellable object, %NULL to ignore
Asynchronously overwrites the file, replacing the contents,
possibly creating a backup copy of the file first.
For more details, see g_file_replace() which is
the synchronous version of this call.
When the operation is finished, @callback will be called.
You can then call g_file_replace_finish() to get the result
of the operation.
input #GFile
an <link linkend="gfile-etag">entity tag</link> for the current #GFile, or NULL to ignore
%TRUE if a backup should be created
a set of #GFileCreateFlags
the <link linkend="io-priority">I/O priority</link> of the request
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
Replaces the contents of @file with @contents of @length bytes.
If @etag is specified (not %NULL), any existing file must have that etag,
or the error %G_IO_ERROR_WRONG_ETAG will be returned.
If @make_backup is %TRUE, this function will attempt to make a backup
of @file.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
The returned @new_etag can be used to verify that the file hasn't
changed the next time it is saved over.
%TRUE if successful. If an error has occurred, this function will return %FALSE and set @error appropriately if present.
input #GFile
a string containing the new contents for @file
the length of @contents in bytes
the old <link linkend="gfile-etag">entity tag</link> for the document, or %NULL
%TRUE if a backup should be created
a set of #GFileCreateFlags
a location to a new <link linkend="gfile-etag">entity tag</link> for the document. This should be freed with g_free() when no longer needed, or %NULL
optional #GCancellable object, %NULL to ignore
Starts an asynchronous replacement of @file with the given
@contents of @length bytes. @etag will replace the document's
current entity tag.
When this operation has completed, @callback will be called with
@user_user data, and the operation can be finalized with
g_file_replace_contents_finish().
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
If @make_backup is %TRUE, this function will attempt to
make a backup of @file.
input #GFile
string of contents to replace the file with
the length of @contents in bytes
a new <link linkend="gfile-etag">entity tag</link> for the @file, or %NULL
%TRUE if a backup should be created
a set of #GFileCreateFlags
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
Finishes an asynchronous replace of the given @file. See
g_file_replace_contents_async(). Sets @new_etag to the new entity
tag for the document, if present.
%TRUE on success, %FALSE on failure.
input #GFile
a #GAsyncResult
a location of a new <link linkend="gfile-etag">entity tag</link> for the document. This should be freed with g_free() when it is no longer needed, or %NULL
Finishes an asynchronous file replace operation started with
g_file_replace_async().
a #GFileOutputStream, or %NULL on error. Free the returned object with g_object_unref().
input #GFile
a #GAsyncResult
Returns an output stream for overwriting the file in readwrite mode,
possibly creating a backup copy of the file first. If the file doesn't
exist, it will be created.
For details about the behaviour, see g_file_replace() which does the
same thing but returns an output stream only.
Note that in many non-local file cases read and write streams are not
supported, so make sure you really need to do read and write streaming,
rather than just opening for reading or writing.
a #GFileIOStream or %NULL on error. Free the returned object with g_object_unref().
a #GFile
an optional <link linkend="gfile-etag">entity tag</link> for the current #GFile, or #NULL to ignore
%TRUE if a backup should be created
a set of #GFileCreateFlags
optional #GCancellable object, %NULL to ignore
Asynchronously overwrites the file in read-write mode,
replacing the contents, possibly creating a backup copy
of the file first.
For more details, see g_file_replace_readwrite() which is
the synchronous version of this call.
When the operation is finished, @callback will be called.
You can then call g_file_replace_readwrite_finish() to get
the result of the operation.
input #GFile
an <link linkend="gfile-etag">entity tag</link> for the current #GFile, or NULL to ignore
%TRUE if a backup should be created
a set of #GFileCreateFlags
the <link linkend="io-priority">I/O priority</link> of the request
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
Finishes an asynchronous file replace operation started with
g_file_replace_readwrite_async().
a #GFileIOStream, or %NULL on error. Free the returned object with g_object_unref().
input #GFile
a #GAsyncResult
Resolves a relative path for @file to an absolute path.
This call does no blocking I/O.
#GFile to the resolved path. %NULL if @relative_path is %NULL or if @file is invalid. Free the returned object with g_object_unref().
input #GFile
a given relative path string
Sets an attribute in the file with attribute name @attribute to @value.
Some attributes can be unset by setting @attribute to
%G_FILE_ATTRIBUTE_TYPE_INVALID and @value_p to %NULL.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
%TRUE if the attribute was set, %FALSE otherwise.
input #GFile
a string containing the attribute's name
The type of the attribute
a pointer to the value (or the pointer itself if the type is a pointer type)
a set of #GFileQueryInfoFlags
optional #GCancellable object, %NULL to ignore
Sets @attribute of type %G_FILE_ATTRIBUTE_TYPE_BYTE_STRING to @value.
If @attribute is of a different type, this operation will fail,
returning %FALSE.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
%TRUE if the @attribute was successfully set to @value in the @file, %FALSE otherwise.
input #GFile
a string containing the attribute's name
a string containing the attribute's new value
a #GFileQueryInfoFlags
optional #GCancellable object, %NULL to ignore
Sets @attribute of type %G_FILE_ATTRIBUTE_TYPE_INT32 to @value.
If @attribute is of a different type, this operation will fail.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
%TRUE if the @attribute was successfully set to @value in the @file, %FALSE otherwise.
input #GFile
a string containing the attribute's name
a #gint32 containing the attribute's new value
a #GFileQueryInfoFlags
optional #GCancellable object, %NULL to ignore
Sets @attribute of type %G_FILE_ATTRIBUTE_TYPE_INT64 to @value.
If @attribute is of a different type, this operation will fail.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
%TRUE if the @attribute was successfully set, %FALSE otherwise.
input #GFile
a string containing the attribute's name
a #guint64 containing the attribute's new value
a #GFileQueryInfoFlags
optional #GCancellable object, %NULL to ignore
Sets @attribute of type %G_FILE_ATTRIBUTE_TYPE_STRING to @value.
If @attribute is of a different type, this operation will fail.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
%TRUE if the @attribute was successfully set, %FALSE otherwise.
input #GFile
a string containing the attribute's name
a string containing the attribute's value
#GFileQueryInfoFlags
optional #GCancellable object, %NULL to ignore
Sets @attribute of type %G_FILE_ATTRIBUTE_TYPE_UINT32 to @value.
If @attribute is of a different type, this operation will fail.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
%TRUE if the @attribute was successfully set to @value in the @file, %FALSE otherwise.
input #GFile
a string containing the attribute's name
a #guint32 containing the attribute's new value
a #GFileQueryInfoFlags
optional #GCancellable object, %NULL to ignore
Sets @attribute of type %G_FILE_ATTRIBUTE_TYPE_UINT64 to @value.
If @attribute is of a different type, this operation will fail.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
%TRUE if the @attribute was successfully set to @value in the @file, %FALSE otherwise.
input #GFile
a string containing the attribute's name
a #guint64 containing the attribute's new value
a #GFileQueryInfoFlags
optional #GCancellable object, %NULL to ignore
Asynchronously sets the attributes of @file with @info.
For more details, see g_file_set_attributes_from_info(),
which is the synchronous version of this call.
When the operation is finished, @callback will be called.
You can then call g_file_set_attributes_finish() to get
the result of the operation.
input #GFile
a #GFileInfo
a #GFileQueryInfoFlags
the <link linkend="io-priority">I/O priority</link> of the request
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback
a #gpointer
Finishes setting an attribute started in g_file_set_attributes_async().
%TRUE if the attributes were set correctly, %FALSE otherwise.
input #GFile
a #GAsyncResult
a #GFileInfo
Tries to set all attributes in the #GFileInfo on the target
values, not stopping on the first error.
If there is any error during this operation then @error will
be set to the first error. Error on particular fields are flagged
by setting the "status" field in the attribute value to
%G_FILE_ATTRIBUTE_STATUS_ERROR_SETTING, which means you can
also detect further errors.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
%FALSE if there was any error, %TRUE otherwise.
input #GFile
a #GFileInfo
#GFileQueryInfoFlags
optional #GCancellable object, %NULL to ignore
Renames @file to the specified display name.
The display name is converted from UTF-8 to the correct encoding
for the target filesystem if possible and the @file is renamed to this.
If you want to implement a rename operation in the user interface the
edit name (#G_FILE_ATTRIBUTE_STANDARD_EDIT_NAME) should be used as the
initial value in the rename widget, and then the result after editing
should be passed to g_file_set_display_name().
On success the resulting converted filename is returned.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
a #GFile specifying what @file was renamed to, or %NULL if there was an error. Free the returned object with g_object_unref().
input #GFile
a string
optional #GCancellable object, %NULL to ignore
Asynchronously sets the display name for a given #GFile.
For more details, see g_file_set_display_name() which is
the synchronous version of this call.
When the operation is finished, @callback will be called.
You can then call g_file_set_display_name_finish() to get
the result of the operation.
input #GFile
a string
the <link linkend="io-priority">I/O priority</link> of the request
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
Finishes setting a display name started with
g_file_set_display_name_async().
a #GFile or %NULL on error. Free the returned object with g_object_unref().
input #GFile
a #GAsyncResult
Starts a file of type #G_FILE_TYPE_MOUNTABLE.
Using @start_operation, you can request callbacks when, for instance,
passwords are needed during authentication.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
When the operation is finished, @callback will be called.
You can then call g_file_mount_mountable_finish() to get
the result of the operation.
input #GFile
flags affecting the operation
a #GMountOperation, or %NULL to avoid user interaction
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied, or %NULL
the data to pass to callback function
Finishes a start operation. See g_file_start_mountable() for details.
Finish an asynchronous start operation that was started
with g_file_start_mountable().
%TRUE if the operation finished successfully. %FALSE otherwise.
input #GFile
a #GAsyncResult
Stops a file of type #G_FILE_TYPE_MOUNTABLE.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
When the operation is finished, @callback will be called.
You can then call g_file_stop_mountable_finish() to get
the result of the operation.
input #GFile
flags affecting the operation
a #GMountOperation, or %NULL to avoid user interaction.
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied, or %NULL
the data to pass to callback function
Finishes an stop operation, see g_file_stop_mountable() for details.
Finish an asynchronous stop operation that was started
with g_file_stop_mountable().
%TRUE if the operation finished successfully. %FALSE otherwise.
input #GFile
a #GAsyncResult
Checks if @file supports <link
linkend="g-main-context-push-thread-default-context">thread-default
contexts</link>. If this returns %FALSE, you cannot perform
asynchronous operations on @file in a thread that has a
thread-default context.
Whether or not @file supports thread-default contexts.
a #GFile
Sends @file to the "Trashcan", if possible. This is similar to
deleting it, but the user can recover it before emptying the trashcan.
Not all file systems support trashing, so this call can return the
%G_IO_ERROR_NOT_SUPPORTED error.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
%TRUE on successful trash, %FALSE otherwise.
#GFile to send to trash
optional #GCancellable object, %NULL to ignore
Asynchronously sends @file to the Trash location, if possible.
input #GFile
the <link linkend="io-priority">I/O priority</link> of the request
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
Finishes an asynchronous file trashing operation, started with
g_file_trash_async().
%TRUE on successful trash, %FALSE otherwise.
input #GFile
a #GAsyncResult
Unmounts a file of type G_FILE_TYPE_MOUNTABLE.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
When the operation is finished, @callback will be called.
You can then call g_file_unmount_mountable_finish() to get
the result of the operation.
input #GFile
flags affecting the operation
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied, or %NULL
the data to pass to callback function
Finishes an unmount operation, see g_file_unmount_mountable() for details.
Finish an asynchronous unmount operation that was started
with g_file_unmount_mountable().
%TRUE if the operation finished successfully. %FALSE otherwise.
input #GFile
a #GAsyncResult
Unmounts a file of type #G_FILE_TYPE_MOUNTABLE.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
When the operation is finished, @callback will be called.
You can then call g_file_unmount_mountable_finish() to get
the result of the operation.
input #GFile
flags affecting the operation
a #GMountOperation, or %NULL to avoid user interaction
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied, or %NULL
the data to pass to callback function
Finishes an unmount operation,
see g_file_unmount_mountable_with_operation() for details.
Finish an asynchronous unmount operation that was started
with g_file_unmount_mountable_with_operation().
%TRUE if the operation finished successfully. %FALSE otherwise.
input #GFile
a #GAsyncResult
Information about a specific attribute.
Flags specifying the behaviour of an attribute.
no flags set.
copy the attribute values when the file is copied.
copy the attribute values when the file is moved.
Acts as a lightweight registry for possible valid file attributes.
The registry stores Key-Value pair formats as #GFileAttributeInfo<!-- -->s.
Creates a new file attribute info list.
a #GFileAttributeInfoList.
Adds a new attribute with @name to the @list, setting
its @type and @flags.
a #GFileAttributeInfoList.
the name of the attribute to add.
the #GFileAttributeType for the attribute.
#GFileAttributeInfoFlags for the attribute.
Makes a duplicate of a file attribute info list.
a copy of the given @list.
a #GFileAttributeInfoList to duplicate.
Gets the file attribute with the name @name from @list.
a #GFileAttributeInfo for the @name, or %NULL if an attribute isn't found.
a #GFileAttributeInfoList.
the name of the attribute to lookup.
References a file attribute info list.
#GFileAttributeInfoList or %NULL on error.
a #GFileAttributeInfoList to reference.
Removes a reference from the given @list. If the reference count
falls to zero, the @list is deleted.
The #GFileAttributeInfoList to unreference.
Determines if a string matches a file attribute.
Creates a new file attribute matcher, which matches attributes
against a given string. #GFileAttributeMatcher<!-- -->s are reference
counted structures, and are created with a reference count of 1. If
the number of references falls to 0, the #GFileAttributeMatcher is
automatically destroyed.
The @attribute string should be formatted with specific keys separated
from namespaces with a double colon. Several "namespace::key" strings may be
concatenated with a single comma (e.g. "standard::type,standard::is-hidden").
The wildcard "*" may be used to match all keys and namespaces, or
"namespace::*" will match all keys in a given namespace.
Examples of strings to use:
<table>
<title>File Attribute Matcher strings and results</title>
<tgroup cols='2' align='left'><thead>
<row><entry> Matcher String </entry><entry> Matches </entry></row></thead>
<tbody>
<row><entry>"*"</entry><entry>matches all attributes.</entry></row>
<row><entry>"standard::is-hidden"</entry><entry>matches only the key is-hidden in the standard namespace.</entry></row>
<row><entry>"standard::type,unix::*"</entry><entry>matches the type key in the standard namespace and
all keys in the unix namespace.</entry></row>
</tbody></tgroup>
</table>
a #GFileAttributeMatcher.
an attribute string to match.
Checks if the matcher will match all of the keys in a given namespace.
This will always return %TRUE if a wildcard character is in use (e.g. if
matcher was created with "standard::*" and @ns is "standard", or if matcher was created
using "*" and namespace is anything.)
TODO: this is awkwardly worded.
%TRUE if the matcher matches all of the entries in the given @ns, %FALSE otherwise.
a #GFileAttributeMatcher.
a string containing a file attribute namespace.
Gets the next matched attribute from a #GFileAttributeMatcher.
a string containing the next attribute or %NULL if no more attribute exist.
a #GFileAttributeMatcher.
Checks if an attribute will be matched by an attribute matcher. If
the matcher was created with the "*" matching string, this function
will always return %TRUE.
%TRUE if @attribute matches @matcher. %FALSE otherwise.
a #GFileAttributeMatcher.
a file attribute key.
Checks if a attribute matcher only matches a given attribute. Always
returns %FALSE if "*" was used when creating the matcher.
%TRUE if the matcher only matches @attribute. %FALSE otherwise.
a #GFileAttributeMatcher.
a file attribute key.
References a file attribute matcher.
a #GFileAttributeMatcher.
a #GFileAttributeMatcher.
Subtracts all attributes of @subtract from @matcher and returns
a matcher that supports those attributes.
Note that currently it is not possible to remove a single
attribute when the @matcher matches the whole namespace - or remove
a namespace or attribute when the matcher matches everything. This
is a limitation of the current implementation, but may be fixed
in the future.
A file attribute matcher matching all attributes of @matcher that are not matched by @subtract
Matcher to subtract from
The matcher to subtract
Prints what the matcher is matching against. The format will be
equal to the format passed to g_file_attribute_matcher_new().
The output however, might not be identical, as the matcher may
decide to use a different order or omit needless parts.
a string describing the attributes the matcher matches against or %NULL if @matcher was %NULL.
a #GFileAttributeMatcher.
Unreferences @matcher. If the reference count falls below 1,
the @matcher is automatically freed.
a #GFileAttributeMatcher.
Used by g_file_set_attributes_from_info() when setting file attributes.
Attribute value is unset (empty).
Attribute value is set.
Indicates an error in setting the value.
The data types for file attributes.
indicates an invalid or uninitalized type.
a null terminated UTF8 string.
a zero terminated string of non-zero bytes.
a boolean value.
an unsigned 4-byte/32-bit integer.
a signed 4-byte/32-bit integer.
an unsigned 8-byte/64-bit integer.
a signed 8-byte/64-bit integer.
a #GObject.
a %NULL terminated char **. Since 2.22
Flags used when copying or moving files.
No flags set.
Overwrite any existing files
Make a backup of any existing files.
Don't follow symlinks.
Copy all file metadata instead of just default set used for copy (see #GFileInfo).
Don't use copy and delete fallback if native move not supported.
Leaves target file with default perms, instead of setting the source file perms.
Flags used when an operation may create a file.
No flags set.
Create a file that can only be accessed by the current user.
Replace the destination as if it didn't exist before. Don't try to keep any old permissions, replace instead of following links. This is generally useful if you're doing a "copy over" rather than a "save new version of" replace operation. You can think of it as "unlink destination" before writing to it, although the implementation may not be exactly like that. Since 2.20
#GFileDescriptorBased is implemented by streams (implementations of
#GInputStream or #GOutputStream) that are based on file descriptors.
Note that <filename><gio/gfiledescriptorbased.h></filename> belongs to
the UNIX-specific GIO interfaces, thus you have to use the
<filename>gio-unix-2.0.pc</filename> pkg-config file when using it.
#GFileEnumerator allows you to operate on a set of #GFile<!-- -->s,
returning a #GFileInfo structure for each file enumerated (e.g.
g_file_enumerate_children() will return a #GFileEnumerator for each
of the children within a directory).
To get the next file's information from a #GFileEnumerator, use
g_file_enumerator_next_file() or its asynchronous version,
g_file_enumerator_next_files_async(). Note that the asynchronous
version will return a list of #GFileInfo<!---->s, whereas the
synchronous will only return the next file in the enumerator.
The ordering of returned files is unspecified for non-Unix
platforms; for more information, see g_dir_read_name(). On Unix,
when operating on local files, returned files will be sorted by
inode number. Effectively you can assume that the ordering of
returned files will be stable between successive calls (and
applications) assuming the directory is unchanged.
If your application needs a specific ordering, such as by name or
modification time, you will have to implement that in your
application code.
To close a #GFileEnumerator, use g_file_enumerator_close(), or
its asynchronous version, g_file_enumerator_close_async(). Once
a #GFileEnumerator is closed, no further actions may be performed
on it, and it should be freed with g_object_unref().
Asynchronously closes the file enumerator.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned in
g_file_enumerator_close_finish().
the <link linkend="io-priority">I/O priority</link> of the request.
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
Finishes closing a file enumerator, started from g_file_enumerator_close_async().
If the file enumerator was already closed when g_file_enumerator_close_async()
was called, then this function will report %G_IO_ERROR_CLOSED in @error, and
return %FALSE. If the file enumerator had pending operation when the close
operation was started, then this function will report %G_IO_ERROR_PENDING, and
return %FALSE. If @cancellable was not %NULL, then the operation may have been
cancelled by triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be set, and %FALSE will be
returned.
%TRUE if the close operation has finished successfully.
a #GAsyncResult.
Returns information for the next file in the enumerated object.
Will block until the information is available. The #GFileInfo
returned from this function will contain attributes that match the
attribute string that was passed when the #GFileEnumerator was created.
See the documentation of #GFileEnumerator for information about the
order of returned files.
On error, returns %NULL and sets @error to the error. If the
enumerator is at the end, %NULL will be returned and @error will
be unset.
A #GFileInfo or %NULL on error or end of enumerator. Free the returned object with g_object_unref() when no longer needed.
optional #GCancellable object, %NULL to ignore.
Request information for a number of files from the enumerator asynchronously.
When all i/o for the operation is finished the @callback will be called with
the requested information.
See the documentation of #GFileEnumerator for information about the
order of returned files.
The callback can be called with less than @num_files files in case of error
or at the end of the enumerator. In case of a partial error the callback will
be called with any succeeding items and no error, and on the next request the
error will be reported. If a request is cancelled the callback will be called
with %G_IO_ERROR_CANCELLED.
During an async request no other sync and async calls are allowed, and will
result in %G_IO_ERROR_PENDING errors.
Any outstanding i/o request with higher priority (lower numerical value) will
be executed before an outstanding request with lower priority. Default
priority is %G_PRIORITY_DEFAULT.
the number of file info objects to request
the <link linkend="io-priority">io priority</link> of the request.
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
Finishes the asynchronous operation started with g_file_enumerator_next_files_async().
a #GList of #GFileInfo<!---->s. You must free the list with g_list_free() and unref the infos with g_object_unref() when you're done with them.
a #GAsyncResult.
Releases all resources used by this enumerator, making the
enumerator return %G_IO_ERROR_CLOSED on all calls.
This will be automatically called when the last reference
is dropped, but you might want to call this function to make
sure resources are released as early as possible.
#TRUE on success or #FALSE on error.
a #GFileEnumerator.
optional #GCancellable object, %NULL to ignore.
Asynchronously closes the file enumerator.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned in
g_file_enumerator_close_finish().
a #GFileEnumerator.
the <link linkend="io-priority">I/O priority</link> of the request.
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
Finishes closing a file enumerator, started from g_file_enumerator_close_async().
If the file enumerator was already closed when g_file_enumerator_close_async()
was called, then this function will report %G_IO_ERROR_CLOSED in @error, and
return %FALSE. If the file enumerator had pending operation when the close
operation was started, then this function will report %G_IO_ERROR_PENDING, and
return %FALSE. If @cancellable was not %NULL, then the operation may have been
cancelled by triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be set, and %FALSE will be
returned.
%TRUE if the close operation has finished successfully.
a #GFileEnumerator.
a #GAsyncResult.
Return a new #GFile which refers to the file named by @info in the source
directory of @enumerator. This function is primarily intended to be used
inside loops with g_file_enumerator_next_file().
This is a convenience method that's equivalent to:
|[
gchar *name = g_file_info_get_name (info);
GFile *child = g_file_get_child (g_file_enumerator_get_container (enumr),
name);
]|
a #GFile for the #GFileInfo passed it.
a #GFileEnumerator
a #GFileInfo gotten from g_file_enumerator_next_file() or the async equivalents.
Get the #GFile container which is being enumerated.
the #GFile which is being enumerated.
a #GFileEnumerator
Checks if the file enumerator has pending operations.
%TRUE if the @enumerator has pending operations.
a #GFileEnumerator.
Checks if the file enumerator has been closed.
%TRUE if the @enumerator is closed.
a #GFileEnumerator.
Returns information for the next file in the enumerated object.
Will block until the information is available. The #GFileInfo
returned from this function will contain attributes that match the
attribute string that was passed when the #GFileEnumerator was created.
See the documentation of #GFileEnumerator for information about the
order of returned files.
On error, returns %NULL and sets @error to the error. If the
enumerator is at the end, %NULL will be returned and @error will
be unset.
A #GFileInfo or %NULL on error or end of enumerator. Free the returned object with g_object_unref() when no longer needed.
a #GFileEnumerator.
optional #GCancellable object, %NULL to ignore.
Request information for a number of files from the enumerator asynchronously.
When all i/o for the operation is finished the @callback will be called with
the requested information.
See the documentation of #GFileEnumerator for information about the
order of returned files.
The callback can be called with less than @num_files files in case of error
or at the end of the enumerator. In case of a partial error the callback will
be called with any succeeding items and no error, and on the next request the
error will be reported. If a request is cancelled the callback will be called
with %G_IO_ERROR_CANCELLED.
During an async request no other sync and async calls are allowed, and will
result in %G_IO_ERROR_PENDING errors.
Any outstanding i/o request with higher priority (lower numerical value) will
be executed before an outstanding request with lower priority. Default
priority is %G_PRIORITY_DEFAULT.
a #GFileEnumerator.
the number of file info objects to request
the <link linkend="io-priority">io priority</link> of the request.
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
Finishes the asynchronous operation started with g_file_enumerator_next_files_async().
a #GList of #GFileInfo<!---->s. You must free the list with g_list_free() and unref the infos with g_object_unref() when you're done with them.
a #GFileEnumerator.
a #GAsyncResult.
Sets the file enumerator as having pending operations.
a #GFileEnumerator.
a boolean value.
A #GFileInfo or %NULL on error or end of enumerator. Free the returned object with g_object_unref() when no longer needed.
optional #GCancellable object, %NULL to ignore.
the number of file info objects to request
the <link linkend="io-priority">io priority</link> of the request.
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
a #GList of #GFileInfo<!---->s. You must free the list with g_list_free() and unref the infos with g_object_unref() when you're done with them.
a #GAsyncResult.
the <link linkend="io-priority">I/O priority</link> of the request.
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
%TRUE if the close operation has finished successfully.
a #GAsyncResult.
GFileIOStream provides io streams that both read and write to the same
file handle.
GFileIOStream implements #GSeekable, which allows the io
stream to jump to arbitrary positions in the file and to truncate
the file, provided the filesystem of the file supports these
operations.
To find the position of a file io stream, use
g_seekable_tell().
To find out if a file io stream supports seeking, use g_seekable_can_seek().
To position a file io stream, use g_seekable_seek().
To find out if a file io stream supports truncating, use
g_seekable_can_truncate(). To truncate a file io
stream, use g_seekable_truncate().
The default implementation of all the #GFileIOStream operations
and the implementation of #GSeekable just call into the same operations
on the output stream.
Gets the entity tag for the file when it has been written.
This must be called after the stream has been written
and closed, as the etag can change while writing.
the entity tag for the stream.
Queries a file io stream for the given @attributes.
This function blocks while querying the stream. For the asynchronous
version of this function, see g_file_io_stream_query_info_async().
While the stream is blocked, the stream will set the pending flag
internally, and any other operations on the stream will fail with
%G_IO_ERROR_PENDING.
Can fail if the stream was already closed (with @error being set to
%G_IO_ERROR_CLOSED), the stream has pending operations (with @error being
set to %G_IO_ERROR_PENDING), or if querying info is not supported for
the stream's interface (with @error being set to %G_IO_ERROR_NOT_SUPPORTED). I
all cases of failure, %NULL will be returned.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be set, and %NULL will
be returned.
a #GFileInfo for the @stream, or %NULL on error.
a file attribute query string.
optional #GCancellable object, %NULL to ignore.
Asynchronously queries the @stream for a #GFileInfo. When completed,
@callback will be called with a #GAsyncResult which can be used to
finish the operation with g_file_io_stream_query_info_finish().
For the synchronous version of this function, see
g_file_io_stream_query_info().
a file attribute query string.
the <link linkend="gio-GIOScheduler">I/O priority</link> of the request.
optional #GCancellable object, %NULL to ignore.
callback to call when the request is satisfied
the data to pass to callback function
Finalizes the asynchronous query started
by g_file_io_stream_query_info_async().
A #GFileInfo for the finished query.
a #GAsyncResult.
Gets the entity tag for the file when it has been written.
This must be called after the stream has been written
and closed, as the etag can change while writing.
the entity tag for the stream.
a #GFileIOStream.
Queries a file io stream for the given @attributes.
This function blocks while querying the stream. For the asynchronous
version of this function, see g_file_io_stream_query_info_async().
While the stream is blocked, the stream will set the pending flag
internally, and any other operations on the stream will fail with
%G_IO_ERROR_PENDING.
Can fail if the stream was already closed (with @error being set to
%G_IO_ERROR_CLOSED), the stream has pending operations (with @error being
set to %G_IO_ERROR_PENDING), or if querying info is not supported for
the stream's interface (with @error being set to %G_IO_ERROR_NOT_SUPPORTED). I
all cases of failure, %NULL will be returned.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be set, and %NULL will
be returned.
a #GFileInfo for the @stream, or %NULL on error.
a #GFileIOStream.
a file attribute query string.
optional #GCancellable object, %NULL to ignore.
Asynchronously queries the @stream for a #GFileInfo. When completed,
@callback will be called with a #GAsyncResult which can be used to
finish the operation with g_file_io_stream_query_info_finish().
For the synchronous version of this function, see
g_file_io_stream_query_info().
a #GFileIOStream.
a file attribute query string.
the <link linkend="gio-GIOScheduler">I/O priority</link> of the request.
optional #GCancellable object, %NULL to ignore.
callback to call when the request is satisfied
the data to pass to callback function
Finalizes the asynchronous query started
by g_file_io_stream_query_info_async().
A #GFileInfo for the finished query.
a #GFileIOStream.
a #GAsyncResult.
a #GFileInfo for the @stream, or %NULL on error.
a file attribute query string.
optional #GCancellable object, %NULL to ignore.
a file attribute query string.
the <link linkend="gio-GIOScheduler">I/O priority</link> of the request.
optional #GCancellable object, %NULL to ignore.
callback to call when the request is satisfied
the data to pass to callback function
A #GFileInfo for the finished query.
a #GAsyncResult.
the entity tag for the stream.
#GFileIcon specifies an icon by pointing to an image file
to be used as icon.
Creates a new icon for a file.
a #GIcon for the given @file, or %NULL on error.
a #GFile.
Gets the #GFile associated with the given @icon.
a #GFile, or %NULL.
a #GIcon.
The file containing the icon.
An interface for writing VFS file handles.
a new #GFile that is a duplicate of the given #GFile.
0 if @file is not a valid #GFile, otherwise an integer that can be used as hash value for the #GFile. This function is intended for easily hashing a #GFile to add to a #GHashTable or similar data structure.
%TRUE if @file1 and @file2 are equal. %FALSE if either is not a #GFile.
the second #GFile
%TRUE if @file is native
%TRUE if #GFile's backend supports the given URI scheme, %FALSE if URI scheme is %NULL, not supported, or #GFile is invalid.
a string containing a URI scheme
a string containing the URI scheme for the given #GFile. The returned string should be freed with g_free() when no longer needed.
string containing the #GFile's base name, or %NULL if given #GFile is invalid. The returned string should be freed with g_free() when no longer needed.
string containing the #GFile's path, or %NULL if no such path exists. The returned string should be freed with g_free() when no longer needed.
a string containing the #GFile's URI. The returned string should be freed with g_free() when no longer needed.
a string containing the #GFile's parse name. The returned string should be freed with g_free() when no longer needed.
a #GFile structure to the parent of the given #GFile or %NULL if there is no parent. Free the returned object with g_object_unref().
%TRUE if the @files's parent, grandparent, etc is @prefix, %FALSE otherwise.
input #GFile
string with the relative path from @descendant to @parent, or %NULL if @descendant doesn't have @parent as prefix. The returned string should be freed with g_free() when no longer needed.
input #GFile
#GFile to the resolved path. %NULL if @relative_path is %NULL or if @file is invalid. Free the returned object with g_object_unref().
a given relative path string
a #GFile to the specified child, or %NULL if the display name couldn't be converted. Free the returned object with g_object_unref().
string to a possible child
A #GFileEnumerator if successful, %NULL on error. Free the returned object with g_object_unref().
an attribute query string
a set of #GFileQueryInfoFlags
optional #GCancellable object, %NULL to ignore
an attribute query string
a set of #GFileQueryInfoFlags
the <link linkend="io-priority">I/O priority</link> of the request
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
a #GFileEnumerator or %NULL if an error occurred. Free the returned object with g_object_unref().
a #GAsyncResult
a #GFileInfo for the given @file, or %NULL on error. Free the returned object with g_object_unref().
an attribute query string
a set of #GFileQueryInfoFlags
optional #GCancellable object, %NULL to ignore
an attribute query string
a set of #GFileQueryInfoFlags
the <link linkend="io-priority">I/O priority</link> of the request
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
#GFileInfo for given @file or %NULL on error. Free the returned object with g_object_unref().
a #GAsyncResult
a #GFileInfo or %NULL if there was an error. Free the returned object with g_object_unref().
an attribute query string
optional #GCancellable object, %NULL to ignore
an attribute query string
the <link linkend="io-priority">I/O priority</link> of the request
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
#GFileInfo for given @file or %NULL on error. Free the returned object with g_object_unref().
a #GAsyncResult
a #GMount where the @file is located or %NULL on error. Free the returned object with g_object_unref().
optional #GCancellable object, %NULL to ignore
the <link linkend="io-priority">I/O priority</link> of the request
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
#GMount for given @file or %NULL on error. Free the returned object with g_object_unref().
a #GAsyncResult
a #GFile specifying what @file was renamed to, or %NULL if there was an error. Free the returned object with g_object_unref().
a string
optional #GCancellable object, %NULL to ignore
a string
the <link linkend="io-priority">I/O priority</link> of the request
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
a #GFile or %NULL on error. Free the returned object with g_object_unref().
a #GAsyncResult
a #GFileAttributeInfoList describing the settable attributes. When you are done with it, release it with g_file_attribute_info_list_unref()
optional #GCancellable object, %NULL to ignore
a #GFileAttributeInfoList describing the writable namespaces. When you are done with it, release it with g_file_attribute_info_list_unref()
optional #GCancellable object, %NULL to ignore
%TRUE if the attribute was set, %FALSE otherwise.
a string containing the attribute's name
The type of the attribute
a pointer to the value (or the pointer itself if the type is a pointer type)
a set of #GFileQueryInfoFlags
optional #GCancellable object, %NULL to ignore
%FALSE if there was any error, %TRUE otherwise.
a #GFileInfo
#GFileQueryInfoFlags
optional #GCancellable object, %NULL to ignore
a #GFileInfo
a #GFileQueryInfoFlags
the <link linkend="io-priority">I/O priority</link> of the request
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback
a #gpointer
%TRUE if the attributes were set correctly, %FALSE otherwise.
a #GAsyncResult
a #GFileInfo
#GFileInputStream or %NULL on error. Free the returned object with g_object_unref().
a #GCancellable
the <link linkend="io-priority">I/O priority</link> of the request
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
a #GFileInputStream or %NULL on error. Free the returned object with g_object_unref().
a #GAsyncResult
a #GFileOutputStream, or %NULL on error. Free the returned object with g_object_unref().
a set of #GFileCreateFlags
optional #GCancellable object, %NULL to ignore
a set of #GFileCreateFlags
the <link linkend="io-priority">I/O priority</link> of the request
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
a valid #GFileOutputStream or %NULL on error. Free the returned object with g_object_unref().
#GAsyncResult
a #GFileOutputStream for the newly created file, or %NULL on error. Free the returned object with g_object_unref().
a set of #GFileCreateFlags
optional #GCancellable object, %NULL to ignore
a set of #GFileCreateFlags
the <link linkend="io-priority">I/O priority</link> of the request
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
a #GFileOutputStream or %NULL on error. Free the returned object with g_object_unref().
a #GAsyncResult
a #GFileOutputStream or %NULL on error. Free the returned object with g_object_unref().
an optional <link linkend="gfile-etag">entity tag</link> for the current #GFile, or #NULL to ignore
%TRUE if a backup should be created
a set of #GFileCreateFlags
optional #GCancellable object, %NULL to ignore
an <link linkend="gfile-etag">entity tag</link> for the current #GFile, or NULL to ignore
%TRUE if a backup should be created
a set of #GFileCreateFlags
the <link linkend="io-priority">I/O priority</link> of the request
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
a #GFileOutputStream, or %NULL on error. Free the returned object with g_object_unref().
a #GAsyncResult
%TRUE if the file was deleted. %FALSE otherwise.
optional #GCancellable object, %NULL to ignore
the <link linkend="io-priority">I/O priority</link> of the request
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
%TRUE if the file was deleted. %FALSE otherwise.
a #GAsyncResult
%TRUE on successful trash, %FALSE otherwise.
optional #GCancellable object, %NULL to ignore
the <link linkend="io-priority">I/O priority</link> of the request
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
%TRUE on successful trash, %FALSE otherwise.
a #GAsyncResult
%TRUE on successful creation, %FALSE otherwise.
optional #GCancellable object, %NULL to ignore
the <link linkend="io-priority">I/O priority</link> of the request
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
%TRUE on successful directory creation, %FALSE otherwise.
a #GAsyncResult
%TRUE on the creation of a new symlink, %FALSE otherwise.
a string with the path for the target of the new symlink
optional #GCancellable object, %NULL to ignore
%TRUE on success, %FALSE otherwise.
destination #GFile
set of #GFileCopyFlags
optional #GCancellable object, %NULL to ignore
function to callback with progress information, or %NULL if progress information is not needed
user data to pass to @progress_callback
destination #GFile
set of #GFileCopyFlags
the <link linkend="io-priority">I/O priority</link> of the request
optional #GCancellable object, %NULL to ignore
function to callback with progress information, or %NULL if progress information is not needed
user data to pass to @progress_callback
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
a %TRUE on success, %FALSE on error.
a #GAsyncResult
%TRUE on successful move, %FALSE otherwise.
#GFile pointing to the destination location
set of #GFileCopyFlags
optional #GCancellable object, %NULL to ignore
#GFileProgressCallback function for updates
gpointer to user data for the callback function
flags affecting the operation
a #GMountOperation, or %NULL to avoid user interaction
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied, or %NULL
the data to pass to callback function
a #GFile or %NULL on error. Free the returned object with g_object_unref().
a #GAsyncResult
flags affecting the operation
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied, or %NULL
the data to pass to callback function
%TRUE if the operation finished successfully. %FALSE otherwise.
a #GAsyncResult
flags affecting the operation
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied, or %NULL
the data to pass to callback function
%TRUE if the @file was ejected successfully. %FALSE otherwise.
a #GAsyncResult
flags affecting the operation
a #GMountOperation or %NULL to avoid user interaction
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied, or %NULL
the data to pass to callback function
%TRUE if successful. If an error has occurred, this function will return %FALSE and set @error appropriately if present.
a #GAsyncResult
a #GFileMonitor for the given @file, or %NULL on error. Free the returned object with g_object_unref().
a set of #GFileMonitorFlags
optional #GCancellable object, %NULL to ignore
a #GFileMonitor for the given @file, or %NULL on error. Free the returned object with g_object_unref().
a set of #GFileMonitorFlags
optional #GCancellable object, %NULL to ignore
#GFileIOStream or %NULL on error. Free the returned object with g_object_unref().
a #GCancellable
the <link linkend="io-priority">I/O priority</link> of the request
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
a #GFileIOStream or %NULL on error. Free the returned object with g_object_unref().
a #GAsyncResult
a #GFileIOStream for the newly created file, or %NULL on error. Free the returned object with g_object_unref().
a set of #GFileCreateFlags
optional #GCancellable object, %NULL to ignore
a set of #GFileCreateFlags
the <link linkend="io-priority">I/O priority</link> of the request
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
a #GFileIOStream or %NULL on error. Free the returned object with g_object_unref().
a #GAsyncResult
a #GFileIOStream or %NULL on error. Free the returned object with g_object_unref().
an optional <link linkend="gfile-etag">entity tag</link> for the current #GFile, or #NULL to ignore
%TRUE if a backup should be created
a set of #GFileCreateFlags
optional #GCancellable object, %NULL to ignore
an <link linkend="gfile-etag">entity tag</link> for the current #GFile, or NULL to ignore
%TRUE if a backup should be created
a set of #GFileCreateFlags
the <link linkend="io-priority">I/O priority</link> of the request
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
a #GFileIOStream, or %NULL on error. Free the returned object with g_object_unref().
a #GAsyncResult
flags affecting the operation
a #GMountOperation, or %NULL to avoid user interaction
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied, or %NULL
the data to pass to callback function
%TRUE if the operation finished successfully. %FALSE otherwise.
a #GAsyncResult
flags affecting the operation
a #GMountOperation, or %NULL to avoid user interaction.
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied, or %NULL
the data to pass to callback function
%TRUE if the operation finished successfully. %FALSE otherwise.
a #GAsyncResult
flags affecting the operation
a #GMountOperation, or %NULL to avoid user interaction
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied, or %NULL
the data to pass to callback function
%TRUE if the operation finished successfully. %FALSE otherwise.
a #GAsyncResult
flags affecting the operation
a #GMountOperation, or %NULL to avoid user interaction
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied, or %NULL
the data to pass to callback function
%TRUE if the @file was ejected successfully. %FALSE otherwise.
a #GAsyncResult
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback to call when the request is satisfied, or %NULL
the data to pass to callback function
%TRUE if the operation finished successfully. %FALSE otherwise.
a #GAsyncResult
%TRUE if successful, with the out parameters set. %FALSE otherwise, with @error set.
#GFileMeasureFlags
optional #GCancellable
a #GFileMeasureProgressCallback
user_data for @progress_callback
the number of bytes of disk space used
the number of directories encountered
the number of non-directories encountered
#GFileMeasureFlags
the <link linkend="io-priority">I/O priority</link> of the request
optional #GCancellable
a #GFileMeasureProgressCallback
user_data for @progress_callback
a #GAsyncReadyCallback to call when complete
the data to pass to callback function
%TRUE if successful, with the out parameters set. %FALSE otherwise, with @error set.
the #GAsyncResult passed to your #GAsyncReadyCallback
the number of bytes of disk space used
the number of directories encountered
the number of non-directories encountered
Functionality for manipulating basic metadata for files. #GFileInfo
implements methods for getting information that all files should
contain, and allows for manipulation of extended attributes.
See <link linkend="gio-GFileAttribute">GFileAttribute</link> for more
information on how GIO handles file attributes.
To obtain a #GFileInfo for a #GFile, use g_file_query_info() (or its
async variant). To obtain a #GFileInfo for a file input or output
stream, use g_file_input_stream_query_info() or
g_file_output_stream_query_info() (or their async variants).
To change the actual attributes of a file, you should then set the
attribute in the #GFileInfo and call g_file_set_attributes_from_info()
or g_file_set_attributes_async() on a GFile.
However, not all attributes can be changed in the file. For instance,
the actual size of a file cannot be changed via g_file_info_set_size().
You may call g_file_query_settable_attributes() and
g_file_query_writable_namespaces() to discover the settable attributes
of a particular file at runtime.
#GFileAttributeMatcher allows for searching through a #GFileInfo for
attributes.
Creates a new file info structure.
a #GFileInfo.
Clears the status information from @info.
a #GFileInfo.
Copies all of the <link linkend="gio-GFileAttribute">GFileAttribute</link>s
from @src_info to @dest_info.
source to copy attributes from.
destination to copy attributes to.
Duplicates a file info structure.
a duplicate #GFileInfo of @other.
a #GFileInfo.
Gets the value of a attribute, formated as a string.
This escapes things as needed to make the string valid
utf8.
a UTF-8 string associated with the given @attribute. When you're done with the string it must be freed with g_free().
a #GFileInfo.
a file attribute key.
Gets the value of a boolean attribute. If the attribute does not
contain a boolean value, %FALSE will be returned.
the boolean value contained within the attribute.
a #GFileInfo.
a file attribute key.
Gets the value of a byte string attribute. If the attribute does
not contain a byte string, %NULL will be returned.
the contents of the @attribute value as a byte string, or %NULL otherwise.
a #GFileInfo.
a file attribute key.
Gets the attribute type, value and status for an attribute key.
%TRUE if @info has an attribute named @attribute, %FALSE otherwise.
a #GFileInfo
a file attribute key
return location for the attribute type, or %NULL
return location for the attribute value, or %NULL
return location for the attribute status, or %NULL
Gets a signed 32-bit integer contained within the attribute. If the
attribute does not contain a signed 32-bit integer, or is invalid,
0 will be returned.
a signed 32-bit integer from the attribute.
a #GFileInfo.
a file attribute key.
Gets a signed 64-bit integer contained within the attribute. If the
attribute does not contain an signed 64-bit integer, or is invalid,
0 will be returned.
a signed 64-bit integer from the attribute.
a #GFileInfo.
a file attribute key.
Gets the value of a #GObject attribute. If the attribute does
not contain a #GObject, %NULL will be returned.
a #GObject associated with the given @attribute, or %NULL otherwise.
a #GFileInfo.
a file attribute key.
Gets the attribute status for an attribute key.
a #GFileAttributeStatus for the given @attribute, or %G_FILE_ATTRIBUTE_STATUS_UNSET if the key is invalid.
a #GFileInfo
a file attribute key
Gets the value of a string attribute. If the attribute does
not contain a string, %NULL will be returned.
the contents of the @attribute value as a UTF-8 string, or %NULL otherwise.
a #GFileInfo.
a file attribute key.
Gets the value of a stringv attribute. If the attribute does
not contain a stringv, %NULL will be returned.
the contents of the @attribute value as a stringv, or %NULL otherwise. Do not free. These returned strings are UTF-8.
a #GFileInfo.
a file attribute key.
Gets the attribute type for an attribute key.
a #GFileAttributeType for the given @attribute, or %G_FILE_ATTRIBUTE_TYPE_INVALID if the key is not set.
a #GFileInfo.
a file attribute key.
Gets an unsigned 32-bit integer contained within the attribute. If the
attribute does not contain an unsigned 32-bit integer, or is invalid,
0 will be returned.
an unsigned 32-bit integer from the attribute.
a #GFileInfo.
a file attribute key.
Gets a unsigned 64-bit integer contained within the attribute. If the
attribute does not contain an unsigned 64-bit integer, or is invalid,
0 will be returned.
a unsigned 64-bit integer from the attribute.
a #GFileInfo.
a file attribute key.
Gets the file's content type.
a string containing the file's content type.
a #GFileInfo.
Returns the #GDateTime representing the deletion date of the file, as
available in G_FILE_ATTRIBUTE_TRASH_DELETION_DATE. If the
G_FILE_ATTRIBUTE_TRASH_DELETION_DATE attribute is unset, %NULL is returned.
a #GDateTime, or %NULL.
a #GFileInfo.
Gets a display name for a file.
a string containing the display name.
a #GFileInfo.
Gets the edit name for a file.
a string containing the edit name.
a #GFileInfo.
Gets the <link linkend="gfile-etag">entity tag</link> for a given
#GFileInfo. See %G_FILE_ATTRIBUTE_ETAG_VALUE.
a string containing the value of the "etag:value" attribute.
a #GFileInfo.
Gets a file's type (whether it is a regular file, symlink, etc).
This is different from the file's content type, see g_file_info_get_content_type().
a #GFileType for the given file.
a #GFileInfo.
Gets the icon for a file.
#GIcon for the given @info.
a #GFileInfo.
Checks if a file is a backup file.
%TRUE if file is a backup file, %FALSE otherwise.
a #GFileInfo.
Checks if a file is hidden.
%TRUE if the file is a hidden file, %FALSE otherwise.
a #GFileInfo.
Checks if a file is a symlink.
%TRUE if the given @info is a symlink.
a #GFileInfo.
Gets the modification time of the current @info and sets it
in @result.
a #GFileInfo.
a #GTimeVal.
Gets the name for a file.
a string containing the file name.
a #GFileInfo.
Gets the file's size.
a #goffset containing the file's size.
a #GFileInfo.
Gets the value of the sort_order attribute from the #GFileInfo.
See %G_FILE_ATTRIBUTE_STANDARD_SORT_ORDER.
a #gint32 containing the value of the "standard::sort_order" attribute.
a #GFileInfo.
Gets the symbolic icon for a file.
#GIcon for the given @info.
a #GFileInfo.
Gets the symlink target for a given #GFileInfo.
a string containing the symlink target.
a #GFileInfo.
Checks if a file info structure has an attribute named @attribute.
%TRUE if @Ginfo has an attribute named @attribute, %FALSE otherwise.
a #GFileInfo.
a file attribute key.
Checks if a file info structure has an attribute in the
specified @name_space.
%TRUE if @Ginfo has an attribute in @name_space, %FALSE otherwise.
a #GFileInfo.
a file attribute namespace.
Lists the file info structure's attributes.
a null-terminated array of strings of all of the possible attribute types for the given @name_space, or %NULL on error.
a #GFileInfo.
a file attribute key's namespace.
Removes all cases of @attribute from @info if it exists.
a #GFileInfo.
a file attribute key.
Sets the @attribute to contain the given value, if possible. To unset the
attribute, use %G_ATTRIBUTE_TYPE_INVALID for @type.
a #GFileInfo.
a file attribute key.
a #GFileAttributeType
pointer to the value
Sets the @attribute to contain the given @attr_value,
if possible.
a #GFileInfo.
a file attribute key.
a boolean value.
Sets the @attribute to contain the given @attr_value,
if possible.
a #GFileInfo.
a file attribute key.
a byte string.
Sets the @attribute to contain the given @attr_value,
if possible.
a #GFileInfo.
a file attribute key.
a signed 32-bit integer
Sets the @attribute to contain the given @attr_value,
if possible.
a #GFileInfo.
attribute name to set.
int64 value to set attribute to.
Sets @mask on @info to match specific attribute types.
a #GFileInfo.
a #GFileAttributeMatcher.
Sets the @attribute to contain the given @attr_value,
if possible.
a #GFileInfo.
a file attribute key.
a #GObject.
Sets the attribute status for an attribute key. This is only
needed by external code that implement g_file_set_attributes_from_info()
or similar functions.
The attribute must exist in @info for this to work. Otherwise %FALSE
is returned and @info is unchanged.
%TRUE if the status was changed, %FALSE if the key was not set.
a #GFileInfo
a file attribute key
a #GFileAttributeStatus
Sets the @attribute to contain the given @attr_value,
if possible.
a #GFileInfo.
a file attribute key.
a UTF-8 string.
Sets the @attribute to contain the given @attr_value,
if possible.
Sinze: 2.22
a #GFileInfo.
a file attribute key
a %NULL terminated array of UTF-8 strings.
Sets the @attribute to contain the given @attr_value,
if possible.
a #GFileInfo.
a file attribute key.
an unsigned 32-bit integer.
Sets the @attribute to contain the given @attr_value,
if possible.
a #GFileInfo.
a file attribute key.
an unsigned 64-bit integer.
Sets the content type attribute for a given #GFileInfo.
See %G_FILE_ATTRIBUTE_STANDARD_CONTENT_TYPE.
a #GFileInfo.
a content type. See <link linkend="gio-GContentType">GContentType</link>.
Sets the display name for the current #GFileInfo.
See %G_FILE_ATTRIBUTE_STANDARD_DISPLAY_NAME.
a #GFileInfo.
a string containing a display name.
Sets the edit name for the current file.
See %G_FILE_ATTRIBUTE_STANDARD_EDIT_NAME.
a #GFileInfo.
a string containing an edit name.
Sets the file type in a #GFileInfo to @type.
See %G_FILE_ATTRIBUTE_STANDARD_TYPE.
a #GFileInfo.
a #GFileType.
Sets the icon for a given #GFileInfo.
See %G_FILE_ATTRIBUTE_STANDARD_ICON.
a #GFileInfo.
a #GIcon.
Sets the "is_hidden" attribute in a #GFileInfo according to @is_symlink.
See %G_FILE_ATTRIBUTE_STANDARD_IS_HIDDEN.
a #GFileInfo.
a #gboolean.
Sets the "is_symlink" attribute in a #GFileInfo according to @is_symlink.
See %G_FILE_ATTRIBUTE_STANDARD_IS_SYMLINK.
a #GFileInfo.
a #gboolean.
Sets the %G_FILE_ATTRIBUTE_TIME_MODIFIED attribute in the file
info to the given time value.
a #GFileInfo.
a #GTimeVal.
Sets the name attribute for the current #GFileInfo.
See %G_FILE_ATTRIBUTE_STANDARD_NAME.
a #GFileInfo.
a string containing a name.
Sets the %G_FILE_ATTRIBUTE_STANDARD_SIZE attribute in the file info
to the given size.
a #GFileInfo.
a #goffset containing the file's size.
Sets the sort order attribute in the file info structure. See
%G_FILE_ATTRIBUTE_STANDARD_SORT_ORDER.
a #GFileInfo.
a sort order integer.
Sets the symbolic icon for a given #GFileInfo.
See %G_FILE_ATTRIBUTE_STANDARD_SYMBOLIC_ICON.
a #GFileInfo.
a #GIcon.
Sets the %G_FILE_ATTRIBUTE_STANDARD_SYMLINK_TARGET attribute in the file info
to the given symlink target.
a #GFileInfo.
a static string containing a path to a symlink target.
Unsets a mask set by g_file_info_set_attribute_mask(), if one
is set.
#GFileInfo.
GFileInputStream provides input streams that take their
content from a file.
GFileInputStream implements #GSeekable, which allows the input
stream to jump to arbitrary positions in the file, provided the
filesystem of the file allows it. To find the position of a file
input stream, use g_seekable_tell(). To find out if a file input
stream supports seeking, use g_seekable_can_seek().
To position a file input stream, use g_seekable_seek().
Queries a file input stream the given @attributes. This function blocks
while querying the stream. For the asynchronous (non-blocking) version
of this function, see g_file_input_stream_query_info_async(). While the
stream is blocked, the stream will set the pending flag internally, and
any other operations on the stream will fail with %G_IO_ERROR_PENDING.
a #GFileInfo, or %NULL on error.
a file attribute query string.
optional #GCancellable object, %NULL to ignore.
Queries the stream information asynchronously.
When the operation is finished @callback will be called.
You can then call g_file_input_stream_query_info_finish()
to get the result of the operation.
For the synchronous version of this function,
see g_file_input_stream_query_info().
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be set
a file attribute query string.
the <link linkend="io-priority">I/O priority</link> of the request.
optional #GCancellable object, %NULL to ignore.
callback to call when the request is satisfied
the data to pass to callback function
Finishes an asynchronous info query operation.
#GFileInfo.
a #GAsyncResult.
Queries a file input stream the given @attributes. This function blocks
while querying the stream. For the asynchronous (non-blocking) version
of this function, see g_file_input_stream_query_info_async(). While the
stream is blocked, the stream will set the pending flag internally, and
any other operations on the stream will fail with %G_IO_ERROR_PENDING.
a #GFileInfo, or %NULL on error.
a #GFileInputStream.
a file attribute query string.
optional #GCancellable object, %NULL to ignore.
Queries the stream information asynchronously.
When the operation is finished @callback will be called.
You can then call g_file_input_stream_query_info_finish()
to get the result of the operation.
For the synchronous version of this function,
see g_file_input_stream_query_info().
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be set
a #GFileInputStream.
a file attribute query string.
the <link linkend="io-priority">I/O priority</link> of the request.
optional #GCancellable object, %NULL to ignore.
callback to call when the request is satisfied
the data to pass to callback function
Finishes an asynchronous info query operation.
#GFileInfo.
a #GFileInputStream.
a #GAsyncResult.
a #GFileInfo, or %NULL on error.
a file attribute query string.
optional #GCancellable object, %NULL to ignore.
a file attribute query string.
the <link linkend="io-priority">I/O priority</link> of the request.
optional #GCancellable object, %NULL to ignore.
callback to call when the request is satisfied
the data to pass to callback function
#GFileInfo.
a #GAsyncResult.
Flags that can be used with g_file_measure_disk_usage().
No flags set.
Report any error encountered while traversing the directory tree. Normally errors are only reported for the toplevel file.
Tally usage based on apparent file sizes. Normally, the block-size is used, if available, as this is a more accurate representation of disk space used. Compare with '<literal>du --apparent-size</literal>'.
Do not cross mount point boundaries. Compare with '<literal>du -x</literal>'.
This callback type is used by g_file_measure_disk_usage() to make
periodic progress reports when measuring the amount of disk spaced
used by a directory.
These calls are made on a best-effort basis and not all types of
#GFile will support them. At the minimum, however, one call will
always be made immediately.
In the case that there is no support, @reporting will be set to
%FALSE (and the other values undefined) and no further calls will be
made. Otherwise, the @reporting will be %TRUE and the other values
all-zeros during the first (immediate) call. In this way, you can
know which type of progress UI to show without a delay.
For g_file_measure_disk_usage() the callback is made directly. For
g_file_measure_disk_usage_async() the callback is made via the
default main context of the calling thread (ie: the same way that the
final async result would be reported).
@current_size is in the same units as requested by the operation (see
%G_FILE_DISK_USAGE_APPARENT_SIZE).
The frequency of the updates is implementation defined, but is
ideally about once every 200ms.
The last progress callback may or may not be equal to the final
result. Always check the async result to get the final value.
%TRUE if more reports will come
the current cumulative size measurement
the number of directories visited so far
the number of non-directory files encountered
the data passed to the original request for this callback
Monitors a file or directory for changes.
To obtain a #GFileMonitor for a file or directory, use
g_file_monitor(), g_file_monitor_file(), or
g_file_monitor_directory().
To get informed about changes to the file or directory you are
monitoring, connect to the #GFileMonitor::changed signal. The
signal will be emitted in the <link
linkend="g-main-context-push-thread-default">thread-default main
context</link> of the thread that the monitor was created in
(though if the global default main context is blocked, this may
cause notifications to be blocked even if the thread-default
context is still running).
Cancels a file monitor.
%TRUE if monitor was cancelled.
Cancels a file monitor.
%TRUE if monitor was cancelled.
a #GFileMonitor.
Emits the #GFileMonitor::changed signal if a change
has taken place. Should be called from file monitor
implementations only.
The signal will be emitted from an idle handler (in the <link
linkend="g-main-context-push-thread-default">thread-default main
context</link>).
a #GFileMonitor.
a #GFile.
a #GFile.
a set of #GFileMonitorEvent flags.
Returns whether the monitor is canceled.
%TRUE if monitor is canceled. %FALSE otherwise.
a #GFileMonitor
Sets the rate limit to which the @monitor will report
consecutive change events to the same file.
a #GFileMonitor.
a non-negative integer with the limit in milliseconds to poll for changes
Emitted when @file has been changed.
If using #G_FILE_MONITOR_SEND_MOVED flag and @event_type is
#G_FILE_MONITOR_EVENT_MOVED, @file will be set to a #GFile containing the
old path, and @other_file will be set to a #GFile containing the new path.
In all the other cases, @other_file will be set to #NULL.
a #GFile.
a #GFile or #NULL.
a #GFileMonitorEvent.
%TRUE if monitor was cancelled.
Specifies what type of event a monitor event is.
a file changed.
a hint that this was probably the last change in a set of changes.
a file was deleted.
a file was created.
a file attribute was changed.
the file location will soon be unmounted.
the file location was unmounted.
the file was moved.
Flags used to set what a #GFileMonitor will watch for.
No flags set.
Watch for mount events.
Pair DELETED and CREATED events caused by file renames (moves) and send a single G_FILE_MONITOR_EVENT_MOVED event instead (NB: not supported on all backends; the default behaviour -without specifying this flag- is to send single DELETED and CREATED events).
Watch for changes to the file made via another hard link. Since 2.36.
GFileOutputStream provides output streams that write their
content to a file.
GFileOutputStream implements #GSeekable, which allows the output
stream to jump to arbitrary positions in the file and to truncate
the file, provided the filesystem of the file supports these
operations.
To find the position of a file output stream, use g_seekable_tell().
To find out if a file output stream supports seeking, use
g_seekable_can_seek().To position a file output stream, use
g_seekable_seek(). To find out if a file output stream supports
truncating, use g_seekable_can_truncate(). To truncate a file output
stream, use g_seekable_truncate().
Gets the entity tag for the file when it has been written.
This must be called after the stream has been written
and closed, as the etag can change while writing.
the entity tag for the stream.
Queries a file output stream for the given @attributes.
This function blocks while querying the stream. For the asynchronous
version of this function, see g_file_output_stream_query_info_async().
While the stream is blocked, the stream will set the pending flag
internally, and any other operations on the stream will fail with
%G_IO_ERROR_PENDING.
Can fail if the stream was already closed (with @error being set to
%G_IO_ERROR_CLOSED), the stream has pending operations (with @error being
set to %G_IO_ERROR_PENDING), or if querying info is not supported for
the stream's interface (with @error being set to %G_IO_ERROR_NOT_SUPPORTED). In
all cases of failure, %NULL will be returned.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be set, and %NULL will
be returned.
a #GFileInfo for the @stream, or %NULL on error.
a file attribute query string.
optional #GCancellable object, %NULL to ignore.
Asynchronously queries the @stream for a #GFileInfo. When completed,
@callback will be called with a #GAsyncResult which can be used to
finish the operation with g_file_output_stream_query_info_finish().
For the synchronous version of this function, see
g_file_output_stream_query_info().
a file attribute query string.
the <link linkend="gio-GIOScheduler">I/O priority</link> of the request.
optional #GCancellable object, %NULL to ignore.
callback to call when the request is satisfied
the data to pass to callback function
Finalizes the asynchronous query started
by g_file_output_stream_query_info_async().
A #GFileInfo for the finished query.
a #GAsyncResult.
Gets the entity tag for the file when it has been written.
This must be called after the stream has been written
and closed, as the etag can change while writing.
the entity tag for the stream.
a #GFileOutputStream.
Queries a file output stream for the given @attributes.
This function blocks while querying the stream. For the asynchronous
version of this function, see g_file_output_stream_query_info_async().
While the stream is blocked, the stream will set the pending flag
internally, and any other operations on the stream will fail with
%G_IO_ERROR_PENDING.
Can fail if the stream was already closed (with @error being set to
%G_IO_ERROR_CLOSED), the stream has pending operations (with @error being
set to %G_IO_ERROR_PENDING), or if querying info is not supported for
the stream's interface (with @error being set to %G_IO_ERROR_NOT_SUPPORTED). In
all cases of failure, %NULL will be returned.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be set, and %NULL will
be returned.
a #GFileInfo for the @stream, or %NULL on error.
a #GFileOutputStream.
a file attribute query string.
optional #GCancellable object, %NULL to ignore.
Asynchronously queries the @stream for a #GFileInfo. When completed,
@callback will be called with a #GAsyncResult which can be used to
finish the operation with g_file_output_stream_query_info_finish().
For the synchronous version of this function, see
g_file_output_stream_query_info().
a #GFileOutputStream.
a file attribute query string.
the <link linkend="gio-GIOScheduler">I/O priority</link> of the request.
optional #GCancellable object, %NULL to ignore.
callback to call when the request is satisfied
the data to pass to callback function
Finalizes the asynchronous query started
by g_file_output_stream_query_info_async().
A #GFileInfo for the finished query.
a #GFileOutputStream.
a #GAsyncResult.
a #GFileInfo for the @stream, or %NULL on error.
a file attribute query string.
optional #GCancellable object, %NULL to ignore.
a file attribute query string.
the <link linkend="gio-GIOScheduler">I/O priority</link> of the request.
optional #GCancellable object, %NULL to ignore.
callback to call when the request is satisfied
the data to pass to callback function
A #GFileInfo for the finished query.
a #GAsyncResult.
the entity tag for the stream.
When doing file operations that may take a while, such as moving
a file or copying a file, a progress callback is used to pass how
far along that operation is to the application.
the current number of bytes in the operation.
the total number of bytes in the operation.
user data passed to the callback.
Flags used when querying a #GFileInfo.
No flags set.
Don't follow symlinks.
When loading the partial contents of a file with g_file_load_partial_contents_async(),
it may become necessary to determine if any more data from the file should be loaded.
A #GFileReadMoreCallback function facilitates this by returning %TRUE if more data
should be read, or %FALSE otherwise.
%TRUE if more data should be read back. %FALSE otherwise.
the data as currently read.
the size of the data currently read.
data passed to the callback.
Indicates the file's on-disk type.
File's type is unknown.
File handle represents a regular file.
File handle represents a directory.
File handle represents a symbolic link (Unix systems).
File is a "special" file, such as a socket, fifo, block device, or character device.
File is a shortcut (Windows systems).
File is a mountable location.
Completes partial file and directory names given a partial string by
looking in the file system for clues. Can return a list of possible
completion strings for widget implementations.
Creates a new filename completer.
a #GFilenameCompleter.
Obtains a completion for @initial_text from @completer.
a completed string, or %NULL if no completion exists. This string is not owned by GIO, so remember to g_free() it when finished.
the filename completer.
text to be completed.
Gets an array of completion strings for a given initial text.
array of strings with possible completions for @initial_text. This array must be freed by g_strfreev() when finished.
the filename completer.
text to be completed.
If @dirs_only is %TRUE, @completer will only
complete directory names, and not file names.
the filename completer.
a #gboolean.
Emitted when the file name completion information comes available.
Indicates a hint from the file system whether files should be
previewed in a file manager. Returned as the value of the key
#G_FILE_ATTRIBUTE_FILESYSTEM_USE_PREVIEW.
Only preview files if user has explicitly requested it.
Preview files if user has requested preview of "local" files.
Never preview files.
Base class for input stream implementations that perform some
kind of filtering operation on a base stream. Typical examples
of filtering operations are character set conversion, compression
and byte order flipping.
Gets the base stream for the filter stream.
a #GInputStream.
a #GFilterInputStream.
Returns whether the base stream will be closed when @stream is
closed.
%TRUE if the base stream will be closed.
a #GFilterInputStream.
Sets whether the base stream will be closed when @stream is closed.
a #GFilterInputStream.
%TRUE to close the base stream.
Base class for output stream implementations that perform some
kind of filtering operation on a base stream. Typical examples
of filtering operations are character set conversion, compression
and byte order flipping.
Gets the base stream for the filter stream.
a #GOutputStream.
a #GFilterOutputStream.
Returns whether the base stream will be closed when @stream is
closed.
%TRUE if the base stream will be closed.
a #GFilterOutputStream.
Sets whether the base stream will be closed when @stream is closed.
a #GFilterOutputStream.
%TRUE to close the base stream.
Error codes returned by GIO functions.
Generic error condition for when any operation fails.
File not found.
File already exists.
File is a directory.
File is not a directory.
File is a directory that isn't empty.
File is not a regular file.
File is not a symbolic link.
File cannot be mounted.
Filename is too many characters.
Filename is invalid or contains invalid characters.
File contains too many symbolic links.
No space left on drive.
Invalid argument.
Permission denied.
Operation not supported for the current backend.
File isn't mounted.
File is already mounted.
File was closed.
Operation was cancelled. See #GCancellable.
Operations are still pending.
File is read only.
Backup couldn't be created.
File's Entity Tag was incorrect.
Operation timed out.
Operation would be recursive.
File is busy.
Operation would block.
Host couldn't be found (remote operations).
Operation would merge files.
Operation failed and a helper program has already interacted with the user. Do not display any error dialog.
The current process has too many files open and can't open any more. Duplicate descriptors do count toward this limit. Since 2.20
The object has not been initialized. Since 2.22
The requested address is already in use. Since 2.22
Need more input to finish operation. Since 2.24
The input data was invalid. Since 2.24
A remote object generated an error that doesn't correspond to a locally registered #GError error domain. Use g_dbus_error_get_remote_error() to extract the D-Bus error name and g_dbus_error_strip_remote_error() to fix up the message so it matches what was received on the wire. Since 2.26.
Host unreachable. Since 2.26
Network unreachable. Since 2.26
Connection refused. Since 2.26
Connection to proxy server failed. Since 2.26
Proxy authentication failed. Since 2.26
Proxy server needs authentication. Since 2.26
Proxy connection is not allowed by ruleset. Since 2.26
Broken pipe. Since 2.36
Gets the name under which @extension was registered.
Note that the same type may be registered as extension
for multiple extension points, under different names.
the name of @extension.
a #GIOExtension
Gets the priority with which @extension was registered.
the priority of @extension
a #GIOExtension
Gets the type associated with @extension.
the type of @extension
a #GIOExtension
Gets a reference to the class for the type that is
associated with @extension.
the #GTypeClass for the type of @extension
a #GIOExtension
Finds a #GIOExtension for an extension point by name.
the #GIOExtension for @extension_point that has the given name, or %NULL if there is no extension with that name
a #GIOExtensionPoint
the name of the extension to get
Gets a list of all extensions that implement this extension point.
The list is sorted by priority, beginning with the highest priority.
a #GList of #GIOExtension<!-- -->s. The list is owned by GIO and should not be modified.
a #GIOExtensionPoint
Gets the required type for @extension_point.
the #GType that all implementations must have, or #G_TYPE_INVALID if the extension point has no required type
a #GIOExtensionPoint
Sets the required type for @extension_point to @type.
All implementations must henceforth have this type.
a #GIOExtensionPoint
the #GType to require
Registers @type as extension for the extension point with name
@extension_point_name.
If @type has already been registered as an extension for this
extension point, the existing #GIOExtension object is returned.
a #GIOExtension object for #GType
the name of the extension point
the #GType to register as extension
the name for the extension
the priority for the extension
Looks up an existing extension point.
the #GIOExtensionPoint, or %NULL if there is no registered extension point with the given name.
the name of the extension point
Registers an extension point.
the new #GIOExtensionPoint. This object is owned by GIO and should not be freed.
The name of the extension point
Provides an interface and default functions for loading and unloading
modules. This is used internally to make GIO extensible, but can also
be used by others to implement module loading.
Creates a new GIOModule that will load the specific
shared library when in use.
a #GIOModule from given @filename, or %NULL on error.
filename of the shared library module.
Optional API for GIO modules to implement.
Should return a list of all the extension points that may be
implemented in this module.
This method will not be called in normal use, however it may be
called when probing existing modules and recording which extension
points that this model is used for. This means we won't have to
load and initialze this module unless its needed.
If this function is not implemented by the module the module will
always be loaded, initialized and then unloaded on application startup
so that it can register its extension points during init.
Note that a module need not actually implement all the extension points
that g_io_module_query returns, since the exact list of extension may
depend on runtime issues. However all extension points actually implemented
must be returned by g_io_module_query() (if defined).
When installing a module that implements g_io_module_query you must
run gio-querymodules in order to build the cache files required for
lazy loading.
A %NULL-terminated array of strings, listing the supported extension points of the module. The array must be suitable for freeing with g_strfreev().
Required API for GIO modules to implement.
This function is ran after the module has been loaded into GIO,
to initialize the module.
a #GIOModule.
Required API for GIO modules to implement.
This function is ran when the module is being unloaded from GIO,
to finalize the module.
a #GIOModule.
Represents a scope for loading IO modules. A scope can be used for blocking
duplicate modules, or blocking a module you don't want to load.
The scope can be used with g_io_modules_load_all_in_directory_with_scope()
or g_io_modules_scan_all_in_directory_with_scope().
Block modules with the given @basename from being loaded when
this scope is used with g_io_modules_scan_all_in_directory_with_scope()
or g_io_modules_load_all_in_directory_with_scope().
a module loading scope
the basename to block
Free a module scope.
a module loading scope
Create a new scope for loading of IO modules. A scope can be used for
blocking duplicate modules, or blocking a module you don't want to load.
Specify the %G_IO_MODULE_SCOPE_BLOCK_DUPLICATES flag to block modules
which have the same base name as a module that has already been seen
in this scope.
the new module scope
flags for the new scope
Flags for use with g_io_module_scope_new().
No module scan flags
When using this scope to load or scan modules, automatically block a modules which has the same base basename as previously loaded module.
Opaque class for defining and scheduling IO jobs.
Used from an I/O job to send a callback to be run in the thread
that the job was started from, waiting for the result (and thus
blocking the I/O job).
The return value of @func
a #GIOSchedulerJob
a #GSourceFunc callback that will be called in the original thread
data to pass to @func
a #GDestroyNotify for @user_data, or %NULL
Used from an I/O job to send a callback to be run asynchronously in
the thread that the job was started from. The callback will be run
when the main loop is available, but at that time the I/O job might
have finished. The return value from the callback is ignored.
Note that if you are passing the @user_data from g_io_scheduler_push_job()
on to this function you have to ensure that it is not freed before
@func is called, either by passing %NULL as @notify to
g_io_scheduler_push_job() or by using refcounting for @user_data.
a #GIOSchedulerJob
a #GSourceFunc callback that will be called in the original thread
data to pass to @func
a #GDestroyNotify for @user_data, or %NULL
I/O Job function.
Long-running jobs should periodically check the @cancellable
to see if they have been cancelled.
%TRUE if this function should be called again to complete the job, %FALSE if the job is complete (or cancelled)
a #GIOSchedulerJob.
optional #GCancellable object, %NULL to ignore.
the data to pass to callback function
GIOStream represents an object that has both read and write streams.
Generally the two streams acts as separate input and output streams,
but they share some common resources and state. For instance, for
seekable streams they may use the same position in both streams.
Examples of #GIOStream objects are #GSocketConnection which represents
a two-way network connection, and #GFileIOStream which represent a
file handle opened in read-write mode.
To do the actual reading and writing you need to get the substreams
with g_io_stream_get_input_stream() and g_io_stream_get_output_stream().
The #GIOStream object owns the input and the output streams, not the other
way around, so keeping the substreams alive will not keep the #GIOStream
object alive. If the #GIOStream object is freed it will be closed, thus
closing the substream, so even if the substreams stay alive they will
always just return a %G_IO_ERROR_CLOSED for all operations.
To close a stream use g_io_stream_close() which will close the common
stream object and also the individual substreams. You can also close
the substreams themselves. In most cases this only marks the
substream as closed, so further I/O on it fails. However, some streams
may support "half-closed" states where one direction of the stream
is actually shut down.
Finishes an asynchronous io stream splice operation.
%TRUE on success, %FALSE otherwise.
a #GAsyncResult.
Requests an asynchronous close of the stream, releasing resources
related to it. When the operation is finished @callback will be
called. You can then call g_io_stream_close_finish() to get
the result of the operation.
For behaviour details see g_io_stream_close().
The asynchronous methods have a default fallback that uses threads
to implement asynchronicity, so they are optional for inheriting
classes. However, if you override one you must override all.
the io priority of the request
optional cancellable object
callback to call when the request is satisfied
the data to pass to callback function
Closes a stream.
%TRUE if stream was successfully closed, %FALSE otherwise.
a #GAsyncResult
Gets the input stream for this object. This is used
for reading.
a #GInputStream, owned by the #GIOStream. Do not free.
Gets the output stream for this object. This is used for
writing.
a #GOutputStream, owned by the #GIOStream. Do not free.
Clears the pending flag on @stream.
a #GIOStream
Closes the stream, releasing resources related to it. This will also
closes the individual input and output streams, if they are not already
closed.
Once the stream is closed, all other operations will return
%G_IO_ERROR_CLOSED. Closing a stream multiple times will not
return an error.
Closing a stream will automatically flush any outstanding buffers
in the stream.
Streams will be automatically closed when the last reference
is dropped, but you might want to call this function to make sure
resources are released as early as possible.
Some streams might keep the backing store of the stream (e.g. a file
descriptor) open after the stream is closed. See the documentation for
the individual stream for details.
On failure the first error that happened will be reported, but the
close operation will finish as much as possible. A stream that failed
to close will still return %G_IO_ERROR_CLOSED for all operations.
Still, it is important to check and report the error to the user,
otherwise there might be a loss of data as all data might not be written.
If @cancellable is not NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
Cancelling a close will still leave the stream closed, but some streams
can use a faster close that doesn't block to e.g. check errors.
The default implementation of this method just calls close on the
individual input/output streams.
%TRUE on success, %FALSE on failure
a #GIOStream
optional #GCancellable object, %NULL to ignore
Requests an asynchronous close of the stream, releasing resources
related to it. When the operation is finished @callback will be
called. You can then call g_io_stream_close_finish() to get
the result of the operation.
For behaviour details see g_io_stream_close().
The asynchronous methods have a default fallback that uses threads
to implement asynchronicity, so they are optional for inheriting
classes. However, if you override one you must override all.
a #GIOStream
the io priority of the request
optional cancellable object
callback to call when the request is satisfied
the data to pass to callback function
Closes a stream.
%TRUE if stream was successfully closed, %FALSE otherwise.
a #GIOStream
a #GAsyncResult
Gets the input stream for this object. This is used
for reading.
a #GInputStream, owned by the #GIOStream. Do not free.
a #GIOStream
Gets the output stream for this object. This is used for
writing.
a #GOutputStream, owned by the #GIOStream. Do not free.
a #GIOStream
Checks if a stream has pending actions.
%TRUE if @stream has pending actions.
a #GIOStream
Checks if a stream is closed.
%TRUE if the stream is closed.
a #GIOStream
Sets @stream to have actions pending. If the pending flag is
already set or @stream is closed, it will return %FALSE and set
@error.
%TRUE if pending was previously unset and is now set.
a #GIOStream
Asyncronously splice the output stream of @stream1 to the input stream of
@stream2, and splice the output stream of @stream2 to the input stream of
@stream1.
When the operation is finished @callback will be called.
You can then call g_io_stream_splice_finish() to get the
result of the operation.
a #GIOStream.
a #GIOStream.
a set of #GIOStreamSpliceFlags.
the io priority of the request.
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback.
user data passed to @callback.
a #GInputStream, owned by the #GIOStream. Do not free.
a #GOutputStream, owned by the #GIOStream. Do not free.
the io priority of the request
optional cancellable object
callback to call when the request is satisfied
the data to pass to callback function
%TRUE if stream was successfully closed, %FALSE otherwise.
a #GAsyncResult
GIOStreamSpliceFlags determine how streams should be spliced.
Do not close either stream.
Close the first stream after the splice.
Close the second stream after the splice.
Wait for both splice operations to finish before calling the callback.
#GIcon is a very minimal interface for icons. It provides functions
for checking the equality of two icons, hashing of icons and
serializing an icon to and from strings.
#GIcon does not provide the actual pixmap for the icon as this is out
of GIO's scope, however implementations of #GIcon may contain the name
of an icon (see #GThemedIcon), or the path to an icon (see #GLoadableIcon).
To obtain a hash of a #GIcon, see g_icon_hash().
To check if two #GIcons are equal, see g_icon_equal().
For serializing a #GIcon, use g_icon_serialize() and
g_icon_deserialize().
If you want to consume #GIcon (for example, in a toolkit) you must
be prepared to handle at least the three following cases:
#GLoadableIcon, #GThemedIcon and #GEmblemedIcon. It may also make
sense to have fast-paths for other cases (like handling #GdkPixbuf
directly, for example) but all compliant #GIcon implementations
outside of GIO must implement #GLoadableIcon.
If your application or library provides one or more #GIcon
implementations you need to ensure that your new implementation also
implements #GLoadableIcon. Additionally, you must provide an
implementation of g_icon_serialize() that gives a result that is
understood by g_icon_deserialize(), yielding one of the built-in icon
types.
Deserializes a #GIcon previously serialized using g_icon_serialize().
a #GIcon, or %NULL when deserialization fails.
a #GVariant created with g_icon_serialize()
Gets a hash for an icon.
a #guint containing a hash for the @icon, suitable for use in a #GHashTable or similar data structure.
#gconstpointer to an icon object.
Generate a #GIcon instance from @str. This function can fail if
@str is not valid - see g_icon_to_string() for discussion.
If your application or library provides one or more #GIcon
implementations you need to ensure that each #GType is registered
with the type system prior to calling g_icon_new_for_string().
An object implementing the #GIcon interface or %NULL if @error is set.
A string obtained via g_icon_to_string().
Checks if two icons are equal.
%TRUE if @icon1 is equal to @icon2. %FALSE otherwise.
pointer to the second #GIcon.
Gets a hash for an icon.
a #guint containing a hash for the @icon, suitable for use in a #GHashTable or similar data structure.
Serializes a #GIcon into a #GVariant. An equivalent #GIcon can be retrieved
back by calling g_icon_deserialize() on the returned value.
As serialization will avoid using raw icon data when possible, it only
makes sense to transfer the #GVariant between processes on the same machine,
(as opposed to over the network), and within the same file system namespace.
a #GVariant, or %NULL when serialization fails.
Generates a textual representation of @icon that can be used for
serialization such as when passing @icon to a different process or
saving it to persistent storage. Use g_icon_new_for_string() to
get @icon back from the returned string.
The encoding of the returned string is proprietary to #GIcon except
in the following two cases
<itemizedlist>
<listitem><para>
If @icon is a #GFileIcon, the returned string is a native path
(such as <literal>/path/to/my icon.png</literal>) without escaping
if the #GFile for @icon is a native file. If the file is not
native, the returned string is the result of g_file_get_uri()
(such as <literal>sftp://path/to/my%20icon.png</literal>).
</para></listitem>
<listitem><para>
If @icon is a #GThemedIcon with exactly one name, the encoding is
simply the name (such as <literal>network-server</literal>).
</para></listitem>
</itemizedlist>
An allocated NUL-terminated UTF8 string or %NULL if @icon can't be serialized. Use g_free() to free.
Checks if two icons are equal.
%TRUE if @icon1 is equal to @icon2. %FALSE otherwise.
pointer to the first #GIcon.
pointer to the second #GIcon.
Serializes a #GIcon into a #GVariant. An equivalent #GIcon can be retrieved
back by calling g_icon_deserialize() on the returned value.
As serialization will avoid using raw icon data when possible, it only
makes sense to transfer the #GVariant between processes on the same machine,
(as opposed to over the network), and within the same file system namespace.
a #GVariant, or %NULL when serialization fails.
a #GIcon
Generates a textual representation of @icon that can be used for
serialization such as when passing @icon to a different process or
saving it to persistent storage. Use g_icon_new_for_string() to
get @icon back from the returned string.
The encoding of the returned string is proprietary to #GIcon except
in the following two cases
<itemizedlist>
<listitem><para>
If @icon is a #GFileIcon, the returned string is a native path
(such as <literal>/path/to/my icon.png</literal>) without escaping
if the #GFile for @icon is a native file. If the file is not
native, the returned string is the result of g_file_get_uri()
(such as <literal>sftp://path/to/my%20icon.png</literal>).
</para></listitem>
<listitem><para>
If @icon is a #GThemedIcon with exactly one name, the encoding is
simply the name (such as <literal>network-server</literal>).
</para></listitem>
</itemizedlist>
An allocated NUL-terminated UTF8 string or %NULL if @icon can't be serialized. Use g_free() to free.
a #GIcon.
GIconIface is used to implement GIcon types for various
different systems. See #GThemedIcon and #GLoadableIcon for
examples of how to implement this interface.
a #guint containing a hash for the @icon, suitable for use in a #GHashTable or similar data structure.
%TRUE if @icon1 is equal to @icon2. %FALSE otherwise.
pointer to the second #GIcon.
An allocated NUL-terminated UTF8 string or %NULL if @icon can't be serialized. Use g_free() to free.
a #GVariant, or %NULL when serialization fails.
#GInetAddress represents an IPv4 or IPv6 internet address. Use
g_resolver_lookup_by_name() or g_resolver_lookup_by_name_async() to
look up the #GInetAddress for a hostname. Use
g_resolver_lookup_by_address() or
g_resolver_lookup_by_address_async() to look up the hostname for a
#GInetAddress.
To actually connect to a remote host, you will need a
#GInetSocketAddress (which includes a #GInetAddress as well as a
port number).
Creates a #GInetAddress for the "any" address (unassigned/"don't
care") for @family.
a new #GInetAddress corresponding to the "any" address for @family.
the address family
Creates a new #GInetAddress from the given @family and @bytes.
@bytes should be 4 bytes for %G_SOCKET_FAMILY_IPV4 and 16 bytes for
%G_SOCKET_FAMILY_IPV6.
a new #GInetAddress corresponding to @family and @bytes.
raw address data
the address family of @bytes
Parses @string as an IP address and creates a new #GInetAddress.
a new #GInetAddress corresponding to @string, or %NULL if @string could not be parsed.
a string representation of an IP address
Creates a #GInetAddress for the loopback address for @family.
a new #GInetAddress corresponding to the loopback address for @family.
the address family
Gets the raw binary address data from @address.
a pointer to an internal array of the bytes in @address, which should not be modified, stored, or freed. The size of this array can be gotten with g_inet_address_get_native_size().
Converts @address to string form.
a representation of @address as a string, which should be freed after use.
Checks if two #GInetAddress instances are equal, e.g. the same address.
%TRUE if @address and @other_address are equal, %FALSE otherwise.
A #GInetAddress.
Another #GInetAddress.
Gets @address's family
@address's family
a #GInetAddress
Tests whether @address is the "any" address for its family.
%TRUE if @address is the "any" address for its family.
a #GInetAddress
Tests whether @address is a link-local address (that is, if it
identifies a host on a local network that is not connected to the
Internet).
%TRUE if @address is a link-local address.
a #GInetAddress
Tests whether @address is the loopback address for its family.
%TRUE if @address is the loopback address for its family.
a #GInetAddress
Tests whether @address is a global multicast address.
%TRUE if @address is a global multicast address.
a #GInetAddress
Tests whether @address is a link-local multicast address.
%TRUE if @address is a link-local multicast address.
a #GInetAddress
Tests whether @address is a node-local multicast address.
%TRUE if @address is a node-local multicast address.
a #GInetAddress
Tests whether @address is an organization-local multicast address.
%TRUE if @address is an organization-local multicast address.
a #GInetAddress
Tests whether @address is a site-local multicast address.
%TRUE if @address is a site-local multicast address.
a #GInetAddress
Tests whether @address is a multicast address.
%TRUE if @address is a multicast address.
a #GInetAddress
Tests whether @address is a site-local address such as 10.0.0.1
(that is, the address identifies a host on a local network that can
not be reached directly from the Internet, but which may have
outgoing Internet connectivity via a NAT or firewall).
%TRUE if @address is a site-local address.
a #GInetAddress
Gets the size of the native raw binary address for @address. This
is the size of the data that you get from g_inet_address_to_bytes().
the number of bytes used for the native version of @address.
a #GInetAddress
Gets the raw binary address data from @address.
a pointer to an internal array of the bytes in @address, which should not be modified, stored, or freed. The size of this array can be gotten with g_inet_address_get_native_size().
a #GInetAddress
Converts @address to string form.
a representation of @address as a string, which should be freed after use.
a #GInetAddress
Whether this is the "any" address for its family.
See g_inet_address_get_is_any().
Whether this is a link-local address.
See g_inet_address_get_is_link_local().
Whether this is the loopback address for its family.
See g_inet_address_get_is_loopback().
Whether this is a global multicast address.
See g_inet_address_get_is_mc_global().
Whether this is a link-local multicast address.
See g_inet_address_get_is_mc_link_local().
Whether this is a node-local multicast address.
See g_inet_address_get_is_mc_node_local().
Whether this is an organization-local multicast address.
See g_inet_address_get_is_mc_org_local().
Whether this is a site-local multicast address.
See g_inet_address_get_is_mc_site_local().
Whether this is a multicast address.
See g_inet_address_get_is_multicast().
Whether this is a site-local address.
See g_inet_address_get_is_loopback().
a representation of @address as a string, which should be freed after use.
a pointer to an internal array of the bytes in @address, which should not be modified, stored, or freed. The size of this array can be gotten with g_inet_address_get_native_size().
#GInetAddressMask represents a range of IPv4 or IPv6 addresses
described by a base address and a length indicating how many bits
of the base address are relevant for matching purposes. These are
often given in string form. Eg, "10.0.0.0/8", or "fe80::/10".
Creates a new #GInetAddressMask representing all addresses whose
first @length bits match @addr.
a new #GInetAddressMask, or %NULL on error
a #GInetAddress
number of bits of @addr to use
Parses @mask_string as an IP address and (optional) length, and
creates a new #GInetAddressMask. The length, if present, is
delimited by a "/". If it is not present, then the length is
assumed to be the full length of the address.
a new #GInetAddressMask corresponding to @string, or %NULL on error.
an IP address or address/length string
Tests if @mask and @mask2 are the same mask.
whether @mask and @mask2 are the same mask
a #GInetAddressMask
another #GInetAddressMask
Gets @mask's base address
@mask's base address
a #GInetAddressMask
Gets the #GSocketFamily of @mask's address
the #GSocketFamily of @mask's address
a #GInetAddressMask
Gets @mask's length
@mask's length
a #GInetAddressMask
Tests if @address falls within the range described by @mask.
whether @address falls within the range described by @mask.
a #GInetAddressMask
a #GInetAddress
Converts @mask back to its corresponding string form.
a string corresponding to @mask.
a #GInetAddressMask
An IPv4 or IPv6 socket address; that is, the combination of a
#GInetAddress and a port number.
Creates a new #GInetSocketAddress for @address and @port.
a new #GInetSocketAddress
a #GInetAddress
a port number
Gets @address's #GInetAddress.
the #GInetAddress for @address, which must be g_object_ref()'d if it will be stored
a #GInetSocketAddress
Gets the <literal>sin6_flowinfo</literal> field from @address,
which must be an IPv6 address.
the flowinfo field
a %G_SOCKET_FAMILY_IPV6 #GInetSocketAddress
Gets @address's port.
the port for @address
a #GInetSocketAddress
Gets the <literal>sin6_scope_id</literal> field from @address,
which must be an IPv6 address.
the scope id field
a %G_SOCKET_FAMILY_IPV6 #GInetAddress
The <literal>sin6_flowinfo</literal> field, for IPv6 addresses.
#GInitable is implemented by objects that can fail during
initialization. If an object implements this interface then
it must be initialized as the first thing after construction,
either via g_initable_init() or g_async_initable_init_async()
(the latter is only available if it also implements #GAsyncInitable).
If the object is not initialized, or initialization returns with an
error, then all operations on the object except g_object_ref() and
g_object_unref() are considered to be invalid, and have undefined
behaviour. They will often fail with g_critical() or g_warning(), but
this must not be relied on.
Users of objects implementing this are not intended to use
the interface method directly, instead it will be used automatically
in various ways. For C applications you generally just call
g_initable_new() directly, or indirectly via a foo_thing_new() wrapper.
This will call g_initable_init() under the cover, returning %NULL and
setting a #GError on failure (at which point the instance is
unreferenced).
For bindings in languages where the native constructor supports
exceptions the binding could check for objects implemention %GInitable
during normal construction and automatically initialize them, throwing
an exception on failure.
Helper function for constructing #GInitable object. This is
similar to g_object_new() but also initializes the object
and returns %NULL, setting an error on failure.
a newly allocated #GObject, or %NULL on error
a #GType supporting #GInitable.
optional #GCancellable object, %NULL to ignore.
a #GError location to store the error occurring, or %NULL to ignore.
the name of the first property, or %NULL if no properties
Helper function for constructing #GInitable object. This is
similar to g_object_new_valist() but also initializes the object
and returns %NULL, setting an error on failure.
a newly allocated #GObject, or %NULL on error
a #GType supporting #GInitable.
the name of the first property, followed by the value, and other property value pairs, and ended by %NULL.
The var args list generated from @first_property_name.
optional #GCancellable object, %NULL to ignore.
Helper function for constructing #GInitable object. This is
similar to g_object_newv() but also initializes the object
and returns %NULL, setting an error on failure.
a newly allocated #GObject, or %NULL on error
a #GType supporting #GInitable.
the number of parameters in @parameters
the parameters to use to construct the object
optional #GCancellable object, %NULL to ignore.
Initializes the object implementing the interface.
The object must be initialized before any real use after initial
construction, either with this function or g_async_initable_init_async().
Implementations may also support cancellation. If @cancellable is not %NULL,
then initialization can be cancelled by triggering the cancellable object
from another thread. If the operation was cancelled, the error
%G_IO_ERROR_CANCELLED will be returned. If @cancellable is not %NULL and
the object doesn't support cancellable initialization the error
%G_IO_ERROR_NOT_SUPPORTED will be returned.
If the object is not initialized, or initialization returns with an
error, then all operations on the object except g_object_ref() and
g_object_unref() are considered to be invalid, and have undefined
behaviour. See the <xref linkend="ginitable"/> section introduction
for more details.
Implementations of this method must be idempotent, i.e. multiple calls
to this function with the same argument should return the same results.
Only the first call initializes the object, further calls return the result
of the first call. This is so that it's safe to implement the singleton
pattern in the GObject constructor function.
%TRUE if successful. If an error has occurred, this function will return %FALSE and set @error appropriately if present.
optional #GCancellable object, %NULL to ignore.
Initializes the object implementing the interface.
The object must be initialized before any real use after initial
construction, either with this function or g_async_initable_init_async().
Implementations may also support cancellation. If @cancellable is not %NULL,
then initialization can be cancelled by triggering the cancellable object
from another thread. If the operation was cancelled, the error
%G_IO_ERROR_CANCELLED will be returned. If @cancellable is not %NULL and
the object doesn't support cancellable initialization the error
%G_IO_ERROR_NOT_SUPPORTED will be returned.
If the object is not initialized, or initialization returns with an
error, then all operations on the object except g_object_ref() and
g_object_unref() are considered to be invalid, and have undefined
behaviour. See the <xref linkend="ginitable"/> section introduction
for more details.
Implementations of this method must be idempotent, i.e. multiple calls
to this function with the same argument should return the same results.
Only the first call initializes the object, further calls return the result
of the first call. This is so that it's safe to implement the singleton
pattern in the GObject constructor function.
%TRUE if successful. If an error has occurred, this function will return %FALSE and set @error appropriately if present.
a #GInitable.
optional #GCancellable object, %NULL to ignore.
Provides an interface for initializing object such that initialization
may fail.
%TRUE if successful. If an error has occurred, this function will return %FALSE and set @error appropriately if present.
optional #GCancellable object, %NULL to ignore.
#GInputStream has functions to read from a stream (g_input_stream_read()),
to close a stream (g_input_stream_close()) and to skip some content
(g_input_stream_skip()).
To copy the content of an input stream to an output stream without
manually handling the reads and writes, use g_output_stream_splice().
All of these functions have async variants too.
Requests an asynchronous closes of the stream, releasing resources related to it.
When the operation is finished @callback will be called.
You can then call g_input_stream_close_finish() to get the result of the
operation.
For behaviour details see g_input_stream_close().
The asyncronous methods have a default fallback that uses threads to implement
asynchronicity, so they are optional for inheriting classes. However, if you
override one you must override all.
the <link linkend="io-priority">I/O priority</link> of the request.
optional cancellable object
callback to call when the request is satisfied
the data to pass to callback function
Finishes closing a stream asynchronously, started from g_input_stream_close_async().
%TRUE if the stream was closed successfully.
a #GAsyncResult.
Request an asynchronous read of @count bytes from the stream into the buffer
starting at @buffer. When the operation is finished @callback will be called.
You can then call g_input_stream_read_finish() to get the result of the
operation.
During an async request no other sync and async calls are allowed on @stream, and will
result in %G_IO_ERROR_PENDING errors.
A value of @count larger than %G_MAXSSIZE will cause a %G_IO_ERROR_INVALID_ARGUMENT error.
On success, the number of bytes read into the buffer will be passed to the
callback. It is not an error if this is not the same as the requested size, as it
can happen e.g. near the end of a file, but generally we try to read
as many bytes as requested. Zero is returned on end of file
(or if @count is zero), but never otherwise.
Any outstanding i/o request with higher priority (lower numerical value) will
be executed before an outstanding request with lower priority. Default
priority is %G_PRIORITY_DEFAULT.
The asyncronous methods have a default fallback that uses threads to implement
asynchronicity, so they are optional for inheriting classes. However, if you
override one you must override all.
a buffer to read data into (which should be at least count bytes long).
the number of bytes that will be read from the stream
the <link linkend="io-priority">I/O priority</link> of the request.
optional #GCancellable object, %NULL to ignore.
callback to call when the request is satisfied
the data to pass to callback function
Finishes an asynchronous stream read operation.
number of bytes read in, or -1 on error, or 0 on end of file.
a #GAsyncResult.
Tries to skip @count bytes from the stream. Will block during the operation.
This is identical to g_input_stream_read(), from a behaviour standpoint,
but the bytes that are skipped are not returned to the user. Some
streams have an implementation that is more efficient than reading the data.
This function is optional for inherited classes, as the default implementation
emulates it using read.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned. If an
operation was partially finished when the operation was cancelled the
partial result will be returned, without an error.
Number of bytes skipped, or -1 on error
the number of bytes that will be skipped from the stream
optional #GCancellable object, %NULL to ignore.
Request an asynchronous skip of @count bytes from the stream.
When the operation is finished @callback will be called.
You can then call g_input_stream_skip_finish() to get the result
of the operation.
During an async request no other sync and async calls are allowed,
and will result in %G_IO_ERROR_PENDING errors.
A value of @count larger than %G_MAXSSIZE will cause a %G_IO_ERROR_INVALID_ARGUMENT error.
On success, the number of bytes skipped will be passed to the callback.
It is not an error if this is not the same as the requested size, as it
can happen e.g. near the end of a file, but generally we try to skip
as many bytes as requested. Zero is returned on end of file
(or if @count is zero), but never otherwise.
Any outstanding i/o request with higher priority (lower numerical value)
will be executed before an outstanding request with lower priority.
Default priority is %G_PRIORITY_DEFAULT.
The asynchronous methods have a default fallback that uses threads to
implement asynchronicity, so they are optional for inheriting classes.
However, if you override one, you must override all.
the number of bytes that will be skipped from the stream
the <link linkend="io-priority">I/O priority</link> of the request.
optional #GCancellable object, %NULL to ignore.
callback to call when the request is satisfied
the data to pass to callback function
Finishes a stream skip operation.
the size of the bytes skipped, or %-1 on error.
a #GAsyncResult.
Clears the pending flag on @stream.
input stream
Closes the stream, releasing resources related to it.
Once the stream is closed, all other operations will return %G_IO_ERROR_CLOSED.
Closing a stream multiple times will not return an error.
Streams will be automatically closed when the last reference
is dropped, but you might want to call this function to make sure
resources are released as early as possible.
Some streams might keep the backing store of the stream (e.g. a file descriptor)
open after the stream is closed. See the documentation for the individual
stream for details.
On failure the first error that happened will be reported, but the close
operation will finish as much as possible. A stream that failed to
close will still return %G_IO_ERROR_CLOSED for all operations. Still, it
is important to check and report the error to the user.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
Cancelling a close will still leave the stream closed, but some streams
can use a faster close that doesn't block to e.g. check errors.
%TRUE on success, %FALSE on failure
A #GInputStream.
optional #GCancellable object, %NULL to ignore.
Requests an asynchronous closes of the stream, releasing resources related to it.
When the operation is finished @callback will be called.
You can then call g_input_stream_close_finish() to get the result of the
operation.
For behaviour details see g_input_stream_close().
The asyncronous methods have a default fallback that uses threads to implement
asynchronicity, so they are optional for inheriting classes. However, if you
override one you must override all.
A #GInputStream.
the <link linkend="io-priority">I/O priority</link> of the request.
optional cancellable object
callback to call when the request is satisfied
the data to pass to callback function
Finishes closing a stream asynchronously, started from g_input_stream_close_async().
%TRUE if the stream was closed successfully.
a #GInputStream.
a #GAsyncResult.
Checks if an input stream has pending actions.
%TRUE if @stream has pending actions.
input stream.
Checks if an input stream is closed.
%TRUE if the stream is closed.
input stream.
Tries to read @count bytes from the stream into the buffer starting at
@buffer. Will block during this read.
If count is zero returns zero and does nothing. A value of @count
larger than %G_MAXSSIZE will cause a %G_IO_ERROR_INVALID_ARGUMENT error.
On success, the number of bytes read into the buffer is returned.
It is not an error if this is not the same as the requested size, as it
can happen e.g. near the end of a file. Zero is returned on end of file
(or if @count is zero), but never otherwise.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned. If an
operation was partially finished when the operation was cancelled the
partial result will be returned, without an error.
On error -1 is returned and @error is set accordingly.
Number of bytes read, or -1 on error, or 0 on end of file.
a #GInputStream.
a buffer to read data into (which should be at least count bytes long).
the number of bytes that will be read from the stream
optional #GCancellable object, %NULL to ignore.
Tries to read @count bytes from the stream into the buffer starting at
@buffer. Will block during this read.
This function is similar to g_input_stream_read(), except it tries to
read as many bytes as requested, only stopping on an error or end of stream.
On a successful read of @count bytes, or if we reached the end of the
stream, %TRUE is returned, and @bytes_read is set to the number of bytes
read into @buffer.
If there is an error during the operation %FALSE is returned and @error
is set to indicate the error status, @bytes_read is updated to contain
the number of bytes read into @buffer before the error occurred.
%TRUE on success, %FALSE if there was an error
a #GInputStream.
a buffer to read data into (which should be at least count bytes long).
the number of bytes that will be read from the stream
location to store the number of bytes that was read from the stream
optional #GCancellable object, %NULL to ignore.
Request an asynchronous read of @count bytes from the stream into the buffer
starting at @buffer. When the operation is finished @callback will be called.
You can then call g_input_stream_read_finish() to get the result of the
operation.
During an async request no other sync and async calls are allowed on @stream, and will
result in %G_IO_ERROR_PENDING errors.
A value of @count larger than %G_MAXSSIZE will cause a %G_IO_ERROR_INVALID_ARGUMENT error.
On success, the number of bytes read into the buffer will be passed to the
callback. It is not an error if this is not the same as the requested size, as it
can happen e.g. near the end of a file, but generally we try to read
as many bytes as requested. Zero is returned on end of file
(or if @count is zero), but never otherwise.
Any outstanding i/o request with higher priority (lower numerical value) will
be executed before an outstanding request with lower priority. Default
priority is %G_PRIORITY_DEFAULT.
The asyncronous methods have a default fallback that uses threads to implement
asynchronicity, so they are optional for inheriting classes. However, if you
override one you must override all.
A #GInputStream.
a buffer to read data into (which should be at least count bytes long).
the number of bytes that will be read from the stream
the <link linkend="io-priority">I/O priority</link> of the request.
optional #GCancellable object, %NULL to ignore.
callback to call when the request is satisfied
the data to pass to callback function
Like g_input_stream_read(), this tries to read @count bytes from
the stream in a blocking fashion. However, rather than reading into
a user-supplied buffer, this will create a new #GBytes containing
the data that was read. This may be easier to use from language
bindings.
If count is zero, returns a zero-length #GBytes and does nothing. A
value of @count larger than %G_MAXSSIZE will cause a
%G_IO_ERROR_INVALID_ARGUMENT error.
On success, a new #GBytes is returned. It is not an error if the
size of this object is not the same as the requested size, as it
can happen e.g. near the end of a file. A zero-length #GBytes is
returned on end of file (or if @count is zero), but never
otherwise.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned. If an
operation was partially finished when the operation was cancelled the
partial result will be returned, without an error.
On error %NULL is returned and @error is set accordingly.
a new #GBytes, or %NULL on error
a #GInputStream.
maximum number of bytes that will be read from the stream. Common values include 4096 and 8192.
optional #GCancellable object, %NULL to ignore.
Request an asynchronous read of @count bytes from the stream into a
new #GBytes. When the operation is finished @callback will be
called. You can then call g_input_stream_read_bytes_finish() to get the
result of the operation.
During an async request no other sync and async calls are allowed
on @stream, and will result in %G_IO_ERROR_PENDING errors.
A value of @count larger than %G_MAXSSIZE will cause a
%G_IO_ERROR_INVALID_ARGUMENT error.
On success, the new #GBytes will be passed to the callback. It is
not an error if this is smaller than the requested size, as it can
happen e.g. near the end of a file, but generally we try to read as
many bytes as requested. Zero is returned on end of file (or if
@count is zero), but never otherwise.
Any outstanding I/O request with higher priority (lower numerical
value) will be executed before an outstanding request with lower
priority. Default priority is %G_PRIORITY_DEFAULT.
A #GInputStream.
the number of bytes that will be read from the stream
the <link linkend="io-priority">I/O priority</link> of the request.
optional #GCancellable object, %NULL to ignore.
callback to call when the request is satisfied
the data to pass to callback function
Finishes an asynchronous stream read-into-#GBytes operation.
the newly-allocated #GBytes, or %NULL on error
a #GInputStream.
a #GAsyncResult.
Finishes an asynchronous stream read operation.
number of bytes read in, or -1 on error, or 0 on end of file.
a #GInputStream.
a #GAsyncResult.
Sets @stream to have actions pending. If the pending flag is
already set or @stream is closed, it will return %FALSE and set
@error.
%TRUE if pending was previously unset and is now set.
input stream
Tries to skip @count bytes from the stream. Will block during the operation.
This is identical to g_input_stream_read(), from a behaviour standpoint,
but the bytes that are skipped are not returned to the user. Some
streams have an implementation that is more efficient than reading the data.
This function is optional for inherited classes, as the default implementation
emulates it using read.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned. If an
operation was partially finished when the operation was cancelled the
partial result will be returned, without an error.
Number of bytes skipped, or -1 on error
a #GInputStream.
the number of bytes that will be skipped from the stream
optional #GCancellable object, %NULL to ignore.
Request an asynchronous skip of @count bytes from the stream.
When the operation is finished @callback will be called.
You can then call g_input_stream_skip_finish() to get the result
of the operation.
During an async request no other sync and async calls are allowed,
and will result in %G_IO_ERROR_PENDING errors.
A value of @count larger than %G_MAXSSIZE will cause a %G_IO_ERROR_INVALID_ARGUMENT error.
On success, the number of bytes skipped will be passed to the callback.
It is not an error if this is not the same as the requested size, as it
can happen e.g. near the end of a file, but generally we try to skip
as many bytes as requested. Zero is returned on end of file
(or if @count is zero), but never otherwise.
Any outstanding i/o request with higher priority (lower numerical value)
will be executed before an outstanding request with lower priority.
Default priority is %G_PRIORITY_DEFAULT.
The asynchronous methods have a default fallback that uses threads to
implement asynchronicity, so they are optional for inheriting classes.
However, if you override one, you must override all.
A #GInputStream.
the number of bytes that will be skipped from the stream
the <link linkend="io-priority">I/O priority</link> of the request.
optional #GCancellable object, %NULL to ignore.
callback to call when the request is satisfied
the data to pass to callback function
Finishes a stream skip operation.
the size of the bytes skipped, or %-1 on error.
a #GInputStream.
a #GAsyncResult.
Number of bytes skipped, or -1 on error
the number of bytes that will be skipped from the stream
optional #GCancellable object, %NULL to ignore.
a buffer to read data into (which should be at least count bytes long).
the number of bytes that will be read from the stream
the <link linkend="io-priority">I/O priority</link> of the request.
optional #GCancellable object, %NULL to ignore.
callback to call when the request is satisfied
the data to pass to callback function
number of bytes read in, or -1 on error, or 0 on end of file.
a #GAsyncResult.
the number of bytes that will be skipped from the stream
the <link linkend="io-priority">I/O priority</link> of the request.
optional #GCancellable object, %NULL to ignore.
callback to call when the request is satisfied
the data to pass to callback function
the size of the bytes skipped, or %-1 on error.
a #GAsyncResult.
the <link linkend="io-priority">I/O priority</link> of the request.
optional cancellable object
callback to call when the request is satisfied
the data to pass to callback function
%TRUE if the stream was closed successfully.
a #GAsyncResult.
Structure used for scatter/gather data input.
You generally pass in an array of #GInputVector<!-- -->s
and the operation will store the read data starting in the
first buffer, switching to the next as needed.
Extends the #GIcon interface and adds the ability to
load icons from streams.
Loads a loadable icon. For the asynchronous version of this function,
see g_loadable_icon_load_async().
a #GInputStream to read the icon from.
an integer.
a location to store the type of the loaded icon, %NULL to ignore.
optional #GCancellable object, %NULL to ignore.
Loads an icon asynchronously. To finish this function, see
g_loadable_icon_load_finish(). For the synchronous, blocking
version of this function, see g_loadable_icon_load().
an integer.
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
Finishes an asynchronous icon load started in g_loadable_icon_load_async().
a #GInputStream to read the icon from.
a #GAsyncResult.
a location to store the type of the loaded icon, %NULL to ignore.
Loads a loadable icon. For the asynchronous version of this function,
see g_loadable_icon_load_async().
a #GInputStream to read the icon from.
a #GLoadableIcon.
an integer.
a location to store the type of the loaded icon, %NULL to ignore.
optional #GCancellable object, %NULL to ignore.
Loads an icon asynchronously. To finish this function, see
g_loadable_icon_load_finish(). For the synchronous, blocking
version of this function, see g_loadable_icon_load().
a #GLoadableIcon.
an integer.
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
Finishes an asynchronous icon load started in g_loadable_icon_load_async().
a #GInputStream to read the icon from.
a #GLoadableIcon.
a #GAsyncResult.
a location to store the type of the loaded icon, %NULL to ignore.
Interface for icons that can be loaded as a stream.
a #GInputStream to read the icon from.
an integer.
a location to store the type of the loaded icon, %NULL to ignore.
optional #GCancellable object, %NULL to ignore.
an integer.
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
a #GInputStream to read the icon from.
a #GAsyncResult.
a location to store the type of the loaded icon, %NULL to ignore.
The menu item attribute which holds the action name of the item. Action
names are namespaced with an identifier for the action group in which the
action resides. For example, "win." for window-specific actions and "app."
for application-wide actions.
See also g_menu_model_get_item_attribute() and g_menu_item_set_attribute().
The menu item attribute that holds the namespace for all action names in
menus that are linked from this item.
The menu item attribute which holds the icon of the item.
The icon is stored in the format returned by g_icon_serialize().
This attribute is intended only to represent 'noun' icons such as
favicons for a webpage, or application icons. It should not be used
for 'verbs' (ie: stock icons).
The menu item attribute which holds the label of the item.
The menu item attribute which holds the target with which the item's action
will be activated.
See also g_menu_item_set_action_and_target()
The name of the link that associates a menu item with a section. The linked
menu will usually be shown in place of the menu item, using the item's label
as a header.
See also g_menu_item_set_link().
The name of the link that associates a menu item with a submenu.
See also g_menu_item_set_link().
#GMemoryInputStream is a class for using arbitrary
memory chunks as input for GIO streaming input operations.
As of GLib 2.34, #GMemoryInputStream implements
#GPollableInputStream.
Creates a new empty #GMemoryInputStream.
a new #GInputStream
Creates a new #GMemoryInputStream with data from the given @bytes.
new #GInputStream read from @bytes
a #GBytes
Creates a new #GMemoryInputStream with data in memory of a given size.
new #GInputStream read from @data of @len bytes.
input data
length of the data, may be -1 if @data is a nul-terminated string
function that is called to free @data, or %NULL
Appends @bytes to data that can be read from the input stream.
a #GMemoryInputStream
input data
Appends @data to data that can be read from the input stream
a #GMemoryInputStream
input data
length of the data, may be -1 if @data is a nul-terminated string
function that is called to free @data, or %NULL
#GMemoryOutputStream is a class for using arbitrary
memory chunks as output for GIO streaming output operations.
As of GLib 2.34, #GMemoryOutputStream implements
#GPollableOutputStream.
Creates a new #GMemoryOutputStream.
If @data is non-%NULL, the stream will use that for its internal storage.
If @realloc_fn is non-%NULL, it will be used for resizing the internal
storage when necessary. To construct a fixed-size output stream,
pass %NULL as @realloc_fn.
|[
/* a stream that can grow */
stream = g_memory_output_stream_new (NULL, 0, realloc, free);
/* another stream that can grow */
stream2 = g_memory_output_stream_new (NULL, 0, g_realloc, g_free);
/* a fixed-size stream */
data = malloc (200);
stream3 = g_memory_output_stream_new (data, 200, NULL, free);
]|
A newly created #GMemoryOutputStream object.
pointer to a chunk of memory to use, or %NULL
the size of @data
a function with realloc() semantics (like g_realloc()) to be called when @data needs to be grown, or %NULL
a function to be called on @data when the stream is finalized, or %NULL
Creates a new #GMemoryOutputStream, using g_realloc() and g_free()
for memory allocation.
Gets any loaded data from the @ostream.
Note that the returned pointer may become invalid on the next
write or truncate operation on the stream.
pointer to the stream's data
a #GMemoryOutputStream
Returns the number of bytes from the start up
to including the last byte written in the stream
that has not been truncated away.
the number of bytes written to the stream
a #GMemoryOutputStream
Gets the size of the currently allocated data area (available from
g_memory_output_stream_get_data()). If the stream isn't
growable (no realloc was passed to g_memory_output_stream_new()) then
this is the maximum size of the stream and further writes
will return %G_IO_ERROR_NO_SPACE.
Note that for growable streams the returned size may become invalid on
the next write or truncate operation on the stream.
If you want the number of bytes currently written to the stream, use
g_memory_output_stream_get_data_size().
the number of bytes allocated for the data buffer
a #GMemoryOutputStream
Returns data from the @ostream as a #GBytes. @ostream must be
closed before calling this function.
the stream's data
a #GMemoryOutputStream
Gets any loaded data from the @ostream. Ownership of the data
is transferred to the caller; when no longer needed it must be
freed using the free function set in @ostream's
#GMemoryOutputStream:destroy-function property.
@ostream must be closed before calling this function.
the stream's data
a #GMemoryOutputStream
Pointer to buffer where data will be written.
Size of data written to the buffer.
Function called with the buffer as argument when the stream is destroyed.
Function with realloc semantics called to enlarge the buffer.
Current size of the data buffer.
#GMenu is a simple implementation of #GMenuModel.
You populate a #GMenu by adding #GMenuItem instances to it.
There are some convenience functions to allow you to directly
add items (avoiding #GMenuItem) for the common cases. To add
a regular item, use g_menu_insert(). To add a section, use
g_menu_insert_section(). To add a submenu, use
g_menu_insert_submenu().
Creates a new #GMenu.
The new menu has no items.
a new #GMenu
Convenience function for appending a normal menu item to the end of
@menu. Combine g_menu_item_new() and g_menu_insert_item() for a more
flexible alternative.
a #GMenu
the section label, or %NULL
the detailed action string, or %NULL
Appends @item to the end of @menu.
See g_menu_insert_item() for more information.
a #GMenu
a #GMenuItem to append
Convenience function for appending a section menu item to the end of
@menu. Combine g_menu_item_new_section() and g_menu_insert_item() for a
more flexible alternative.
a #GMenu
the section label, or %NULL
a #GMenuModel with the items of the section
Convenience function for appending a submenu menu item to the end of
@menu. Combine g_menu_item_new_submenu() and g_menu_insert_item() for a
more flexible alternative.
a #GMenu
the section label, or %NULL
a #GMenuModel with the items of the submenu
Marks @menu as frozen.
After the menu is frozen, it is an error to attempt to make any
changes to it. In effect this means that the #GMenu API must no
longer be used.
This function causes g_menu_model_is_mutable() to begin returning
%FALSE, which has some positive performance implications.
a #GMenu
Convenience function for inserting a normal menu item into @menu.
Combine g_menu_item_new() and g_menu_insert_item() for a more flexible
alternative.
a #GMenu
the position at which to insert the item
the section label, or %NULL
the detailed action string, or %NULL
Inserts @item into @menu.
The "insertion" is actually done by copying all of the attribute and
link values of @item and using them to form a new item within @menu.
As such, @item itself is not really inserted, but rather, a menu item
that is exactly the same as the one presently described by @item.
This means that @item is essentially useless after the insertion
occurs. Any changes you make to it are ignored unless it is inserted
again (at which point its updated values will be copied).
You should probably just free @item once you're done.
There are many convenience functions to take care of common cases.
See g_menu_insert(), g_menu_insert_section() and
g_menu_insert_submenu() as well as "prepend" and "append" variants of
each of these functions.
a #GMenu
the position at which to insert the item
the #GMenuItem to insert
Convenience function for inserting a section menu item into @menu.
Combine g_menu_item_new_section() and g_menu_insert_item() for a more
flexible alternative.
a #GMenu
the position at which to insert the item
the section label, or %NULL
a #GMenuModel with the items of the section
Convenience function for inserting a submenu menu item into @menu.
Combine g_menu_item_new_submenu() and g_menu_insert_item() for a more
flexible alternative.
a #GMenu
the position at which to insert the item
the section label, or %NULL
a #GMenuModel with the items of the submenu
Convenience function for prepending a normal menu item to the start
of @menu. Combine g_menu_item_new() and g_menu_insert_item() for a more
flexible alternative.
a #GMenu
the section label, or %NULL
the detailed action string, or %NULL
Prepends @item to the start of @menu.
See g_menu_insert_item() for more information.
a #GMenu
a #GMenuItem to prepend
Convenience function for prepending a section menu item to the start
of @menu. Combine g_menu_item_new_section() and g_menu_insert_item() for
a more flexible alternative.
a #GMenu
the section label, or %NULL
a #GMenuModel with the items of the section
Convenience function for prepending a submenu menu item to the start
of @menu. Combine g_menu_item_new_submenu() and g_menu_insert_item() for
a more flexible alternative.
a #GMenu
the section label, or %NULL
a #GMenuModel with the items of the submenu
Removes an item from the menu.
@position gives the index of the item to remove.
It is an error if position is not in range the range from 0 to one
less than the number of items in the menu.
It is not possible to remove items by identity since items are added
to the menu simply by copying their links and attributes (ie:
identity of the item itself is not preserved).
a #GMenu
the position of the item to remove
Removes all items in the menu.
a #GMenu
#GMenuAttributeIter is an opaque structure type. You must access it
using the functions below.
This function combines g_menu_attribute_iter_next() with
g_menu_attribute_iter_get_name() and g_menu_attribute_iter_get_value().
First the iterator is advanced to the next (possibly first) attribute.
If that fails, then %FALSE is returned and there are no other
effects.
If successful, @name and @value are set to the name and value of the
attribute that has just been advanced to. At this point,
g_menu_attribute_iter_get_name() and g_menu_attribute_iter_get_value() will
return the same values again.
The value returned in @name remains valid for as long as the iterator
remains at the current position. The value returned in @value must
be unreffed using g_variant_unref() when it is no longer in use.
%TRUE on success, or %FALSE if there is no additional attribute
the type of the attribute
the attribute value
Gets the name of the attribute at the current iterator position, as
a string.
The iterator is not advanced.
the name of the attribute
a #GMenuAttributeIter
This function combines g_menu_attribute_iter_next() with
g_menu_attribute_iter_get_name() and g_menu_attribute_iter_get_value().
First the iterator is advanced to the next (possibly first) attribute.
If that fails, then %FALSE is returned and there are no other
effects.
If successful, @name and @value are set to the name and value of the
attribute that has just been advanced to. At this point,
g_menu_attribute_iter_get_name() and g_menu_attribute_iter_get_value() will
return the same values again.
The value returned in @name remains valid for as long as the iterator
remains at the current position. The value returned in @value must
be unreffed using g_variant_unref() when it is no longer in use.
%TRUE on success, or %FALSE if there is no additional attribute
a #GMenuAttributeIter
the type of the attribute
the attribute value
Gets the value of the attribute at the current iterator position.
The iterator is not advanced.
the value of the current attribute
a #GMenuAttributeIter
Attempts to advance the iterator to the next (possibly first)
attribute.
%TRUE is returned on success, or %FALSE if there are no more
attributes.
You must call this function when you first acquire the iterator
to advance it to the first attribute (and determine if the first
attribute exists at all).
%TRUE on success, or %FALSE when there are no more attributes
a #GMenuAttributeIter
%TRUE on success, or %FALSE if there is no additional attribute
the type of the attribute
the attribute value
#GMenuItem is an opaque structure type. You must access it using the
functions below.
Creates a new #GMenuItem.
If @label is non-%NULL it is used to set the "label" attribute of the
new item.
If @detailed_action is non-%NULL it is used to set the "action" and
possibly the "target" attribute of the new item. See
g_menu_item_set_detailed_action() for more information.
a new #GMenuItem
the section label, or %NULL
the detailed action string, or %NULL
Creates a #GMenuItem as an exact copy of an existing menu item in a
#GMenuModel.
@item_index must be valid (ie: be sure to call
g_menu_model_get_n_items() first).
a new #GMenuItem.
a #GMenuModel
the index of an item in @model
Creates a new #GMenuItem representing a section.
This is a convenience API around g_menu_item_new() and
g_menu_item_set_section().
The effect of having one menu appear as a section of another is
exactly as it sounds: the items from @section become a direct part of
the menu that @menu_item is added to.
Visual separation is typically displayed between two non-empty
sections. If @label is non-%NULL then it will be encorporated into
this visual indication. This allows for labeled subsections of a
menu.
As a simple example, consider a typical "Edit" menu from a simple
program. It probably contains an "Undo" and "Redo" item, followed by
a separator, followed by "Cut", "Copy" and "Paste".
This would be accomplished by creating three #GMenu instances. The
first would be populated with the "Undo" and "Redo" items, and the
second with the "Cut", "Copy" and "Paste" items. The first and
second menus would then be added as submenus of the third. In XML
format, this would look something like the following:
<informalexample><programlisting><![CDATA[
<menu id='edit-menu'>
<section>
<item label='Undo'/>
<item label='Redo'/>
</section>
<section>
<item label='Cut'/>
<item label='Copy'/>
<item label='Paste'/>
</section>
</menu>
]]></programlisting></informalexample>
The following example is exactly equivalent. It is more illustrative
of the exact relationship between the menus and items (keeping in
mind that the 'link' element defines a new menu that is linked to the
containing one). The style of the second example is more verbose and
difficult to read (and therefore not recommended except for the
purpose of understanding what is really going on).
<informalexample><programlisting><![CDATA[
<menu id='edit-menu'>
<item>
<link name='section'>
<item label='Undo'/>
<item label='Redo'/>
</link>
</item>
<item>
<link name='section'>
<item label='Cut'/>
<item label='Copy'/>
<item label='Paste'/>
</link>
</item>
</menu>
]]></programlisting></informalexample>
a new #GMenuItem
the section label, or %NULL
a #GMenuModel with the items of the section
Creates a new #GMenuItem representing a submenu.
This is a convenience API around g_menu_item_new() and
g_menu_item_set_submenu().
a new #GMenuItem
the section label, or %NULL
a #GMenuModel with the items of the submenu
Queries the named @attribute on @menu_item.
If the attribute exists and matches the #GVariantType corresponding
to @format_string then @format_string is used to deconstruct the
value into the positional parameters and %TRUE is returned.
If the attribute does not exist, or it does exist but has the wrong
type, then the positional parameters are ignored and %FALSE is
returned.
%TRUE if the named attribute was found with the expected type
a #GMenuItem
the attribute name to query
a #GVariant format string
Queries the named @attribute on @menu_item.
If @expected_type is specified and the attribute does not have this
type, %NULL is returned. %NULL is also returned if the attribute
simply does not exist.
the attribute value, or %NULL
a #GMenuItem
the attribute name to query
the expected type of the attribute
Queries the named @link on @menu_item.
the link, or %NULL
a #GMenuItem
the link name to query
Sets or unsets the "action" and "target" attributes of @menu_item.
If @action is %NULL then both the "action" and "target" attributes
are unset (and @format_string is ignored along with the positional
parameters).
If @action is non-%NULL then the "action" attribute is set.
@format_string is then inspected. If it is non-%NULL then the proper
position parameters are collected to create a #GVariant instance to
use as the target value. If it is %NULL then the positional
parameters are ignored and the "target" attribute is unset.
See also g_menu_item_set_action_and_target_value() for an equivalent
call that directly accepts a #GVariant. See
g_menu_item_set_detailed_action() for a more convenient version that
works with string-typed targets.
See also g_menu_item_set_action_and_target_value() for a
description of the semantics of the action and target attributes.
a #GMenuItem
the name of the action for this item
a GVariant format string
Sets or unsets the "action" and "target" attributes of @menu_item.
If @action is %NULL then both the "action" and "target" attributes
are unset (and @target_value is ignored).
If @action is non-%NULL then the "action" attribute is set. The
"target" attribute is then set to the value of @target_value if it is
non-%NULL or unset otherwise.
Normal menu items (ie: not submenu, section or other custom item
types) are expected to have the "action" attribute set to identify
the action that they are associated with. The state type of the
action help to determine the disposition of the menu item. See
#GAction and #GActionGroup for an overview of actions.
In general, clicking on the menu item will result in activation of
the named action with the "target" attribute given as the parameter
to the action invocation. If the "target" attribute is not set then
the action is invoked with no parameter.
If the action has no state then the menu item is usually drawn as a
plain menu item (ie: with no additional decoration).
If the action has a boolean state then the menu item is usually drawn
as a toggle menu item (ie: with a checkmark or equivalent
indication). The item should be marked as 'toggled' or 'checked'
when the boolean state is %TRUE.
If the action has a string state then the menu item is usually drawn
as a radio menu item (ie: with a radio bullet or equivalent
indication). The item should be marked as 'selected' when the string
state is equal to the value of the @target property.
See g_menu_item_set_action_and_target() or
g_menu_item_set_detailed_action() for two equivalent calls that are
probably more convenient for most uses.
a #GMenuItem
the name of the action for this item
a #GVariant to use as the action target
Sets or unsets an attribute on @menu_item.
The attribute to set or unset is specified by @attribute. This
can be one of the standard attribute names %G_MENU_ATTRIBUTE_LABEL,
%G_MENU_ATTRIBUTE_ACTION, %G_MENU_ATTRIBUTE_TARGET, or a custom
attribute name.
Attribute names are restricted to lowercase characters, numbers
and '-'. Furthermore, the names must begin with a lowercase character,
must not end with a '-', and must not contain consecutive dashes.
If @format_string is non-%NULL then the proper position parameters
are collected to create a #GVariant instance to use as the attribute
value. If it is %NULL then the positional parameterrs are ignored
and the named attribute is unset.
See also g_menu_item_set_attribute_value() for an equivalent call
that directly accepts a #GVariant.
a #GMenuItem
the attribute to set
a #GVariant format string, or %NULL
Sets or unsets an attribute on @menu_item.
The attribute to set or unset is specified by @attribute. This
can be one of the standard attribute names %G_MENU_ATTRIBUTE_LABEL,
%G_MENU_ATTRIBUTE_ACTION, %G_MENU_ATTRIBUTE_TARGET, or a custom
attribute name.
Attribute names are restricted to lowercase characters, numbers
and '-'. Furthermore, the names must begin with a lowercase character,
must not end with a '-', and must not contain consecutive dashes.
must consist only of lowercase
ASCII characters, digits and '-'.
If @value is non-%NULL then it is used as the new value for the
attribute. If @value is %NULL then the attribute is unset. If
the @value #GVariant is floating, it is consumed.
See also g_menu_item_set_attribute() for a more convenient way to do
the same.
a #GMenuItem
the attribute to set
a #GVariant to use as the value, or %NULL
Sets the "action" and possibly the "target" attribute of @menu_item.
The format of @detailed_action is the same format parsed by
g_action_parse_detailed_name().
See g_menu_item_set_action_and_target() or
g_menu_item_set_action_and_target_value() for more flexible (but
slightly less convenient) alternatives.
See also g_menu_item_set_action_and_target_value() for a description of
the semantics of the action and target attributes.
a #GMenuItem
the "detailed" action string
Sets (or unsets) the icon on @menu_item.
This call is the same as calling g_icon_serialize() and using the
result as the value to g_menu_item_set_attribute_value() for
%G_MENU_ATTRIBUTE_ICON.
This API is only intended for use with "noun" menu items; things like
bookmarks or applications in an "Open With" menu. Don't use it on
menu items corresponding to verbs (eg: stock icons for 'Save' or
'Quit').
If @icon is %NULL then the icon is unset.
a #GMenuItem
a #GIcon, or %NULL
Sets or unsets the "label" attribute of @menu_item.
If @label is non-%NULL it is used as the label for the menu item. If
it is %NULL then the label attribute is unset.
a #GMenuItem
the label to set, or %NULL to unset
Creates a link from @menu_item to @model if non-%NULL, or unsets it.
Links are used to establish a relationship between a particular menu
item and another menu. For example, %G_MENU_LINK_SUBMENU is used to
associate a submenu with a particular menu item, and %G_MENU_LINK_SECTION
is used to create a section. Other types of link can be used, but there
is no guarantee that clients will be able to make sense of them.
Link types are restricted to lowercase characters, numbers
and '-'. Furthermore, the names must begin with a lowercase character,
must not end with a '-', and must not contain consecutive dashes.
a #GMenuItem
type of link to establish or unset
the #GMenuModel to link to (or %NULL to unset)
Sets or unsets the "section" link of @menu_item to @section.
The effect of having one menu appear as a section of another is
exactly as it sounds: the items from @section become a direct part of
the menu that @menu_item is added to. See g_menu_item_new_section()
for more information about what it means for a menu item to be a
section.
a #GMenuItem
a #GMenuModel, or %NULL
Sets or unsets the "submenu" link of @menu_item to @submenu.
If @submenu is non-%NULL, it is linked to. If it is %NULL then the
link is unset.
The effect of having one menu appear as a submenu of another is
exactly as it sounds.
a #GMenuItem
a #GMenuModel, or %NULL
#GMenuLinkIter is an opaque structure type. You must access it using
the functions below.
This function combines g_menu_link_iter_next() with
g_menu_link_iter_get_name() and g_menu_link_iter_get_value().
First the iterator is advanced to the next (possibly first) link.
If that fails, then %FALSE is returned and there are no other effects.
If successful, @out_link and @value are set to the name and #GMenuModel
of the link that has just been advanced to. At this point,
g_menu_link_iter_get_name() and g_menu_link_iter_get_value() will return the
same values again.
The value returned in @out_link remains valid for as long as the iterator
remains at the current position. The value returned in @value must
be unreffed using g_object_unref() when it is no longer in use.
%TRUE on success, or %FALSE if there is no additional link
the name of the link
the linked #GMenuModel
Gets the name of the link at the current iterator position.
The iterator is not advanced.
the type of the link
a #GMenuLinkIter
This function combines g_menu_link_iter_next() with
g_menu_link_iter_get_name() and g_menu_link_iter_get_value().
First the iterator is advanced to the next (possibly first) link.
If that fails, then %FALSE is returned and there are no other effects.
If successful, @out_link and @value are set to the name and #GMenuModel
of the link that has just been advanced to. At this point,
g_menu_link_iter_get_name() and g_menu_link_iter_get_value() will return the
same values again.
The value returned in @out_link remains valid for as long as the iterator
remains at the current position. The value returned in @value must
be unreffed using g_object_unref() when it is no longer in use.
%TRUE on success, or %FALSE if there is no additional link
a #GMenuLinkIter
the name of the link
the linked #GMenuModel
Gets the linked #GMenuModel at the current iterator position.
The iterator is not advanced.
the #GMenuModel that is linked to
a #GMenuLinkIter
Attempts to advance the iterator to the next (possibly first)
link.
%TRUE is returned on success, or %FALSE if there are no more links.
You must call this function when you first acquire the iterator to
advance it to the first link (and determine if the first link exists
at all).
%TRUE on success, or %FALSE when there are no more links
a #GMenuLinkIter
%TRUE on success, or %FALSE if there is no additional link
the name of the link
the linked #GMenuModel
#GMenuModel represents the contents of a menu -- an ordered list of
menu items. The items are associated with actions, which can be
activated through them. Items can be grouped in sections, and may
have submenus associated with them. Both items and sections usually
have some representation data, such as labels or icons. The type of
the associated action (ie whether it is stateful, and what kind of
state it has) can influence the representation of the item.
The conceptual model of menus in #GMenuModel is hierarchical:
sections and submenus are again represented by #GMenuModels.
Menus themselves do not define their own roles. Rather, the role
of a particular #GMenuModel is defined by the item that references
it (or, in the case of the 'root' menu, is defined by the context
in which it is used).
As an example, consider the visible portions of the menu in
<xref linkend="menu-example"/>.
<figure id="menu-example">
<title>An example menu</title>
<graphic fileref="menu-example.png" format="PNG"></graphic>
</figure>
There are 8 "menus" visible in the screenshot: one menubar, two
submenus and 5 sections:
<itemizedlist>
<listitem>the toplevel menubar (containing 4 items)</listitem>
<listitem>the View submenu (containing 3 sections)</listitem>
<listitem>the first section of the View submenu (containing 2 items)</listitem>
<listitem>the second section of the View submenu (containing 1 item)</listitem>
<listitem>the final section of the View submenu (containing 1 item)</listitem>
<listitem>the Highlight Mode submenu (containing 2 sections)</listitem>
<listitem>the Sources section (containing 2 items)</listitem>
<listitem>the Markup section (containing 2 items)</listitem>
</itemizedlist>
<xref linkend="menu-model"/> illustrates the conceptual connection between
these 8 menus. Each large block in the figure represents a menu and the
smaller blocks within the large block represent items in that menu. Some
items contain references to other menus.
<figure id="menu-model">
<title>A menu model</title>
<graphic fileref="menu-model.png" format="PNG"></graphic>
</figure>
Notice that the separators visible in <xref linkend="menu-example"/>
appear nowhere in <xref linkend="menu-model"/>. This is because
separators are not explicitly represented in the menu model. Instead,
a separator is inserted between any two non-empty sections of a menu.
Section items can have labels just like any other item. In that case,
a display system may show a section header instead of a separator.
The motivation for this abstract model of application controls is
that modern user interfaces tend to make these controls available
outside the application. Examples include global menus, jumplists,
dash boards, etc. To support such uses, it is necessary to 'export'
information about actions and their representation in menus, which
is exactly what the
<link linkend="gio-GActionGroup-exporter">GActionGroup exporter</link>
and the
<link linkend="gio-GMenuModel-exporter">GMenuModel exporter</link>
do for #GActionGroup and #GMenuModel. The client-side counterparts
to make use of the exported information are #GDBusActionGroup and
#GDBusMenuModel.
The API of #GMenuModel is very generic, with iterators for the
attributes and links of an item, see g_menu_model_iterate_item_attributes()
and g_menu_model_iterate_item_links(). The 'standard' attributes and
link types have predefined names: %G_MENU_ATTRIBUTE_LABEL,
%G_MENU_ATTRIBUTE_ACTION, %G_MENU_ATTRIBUTE_TARGET, %G_MENU_LINK_SECTION
and %G_MENU_LINK_SUBMENU.
Items in a #GMenuModel represent active controls if they refer to
an action that can get activated when the user interacts with the
menu item. The reference to the action is encoded by the string id
in the %G_MENU_ATTRIBUTE_ACTION attribute. An action id uniquely
identifies an action in an action group. Which action group(s) provide
actions depends on the context in which the menu model is used.
E.g. when the model is exported as the application menu of a
#GtkApplication, actions can be application-wide or window-specific
(and thus come from two different action groups). By convention, the
application-wide actions have names that start with "app.", while the
names of window-specific actions start with "win.".
While a wide variety of stateful actions is possible, the following
is the minimum that is expected to be supported by all users of exported
menu information:
<itemizedlist>
<listitem>an action with no parameter type and no state</listitem>
<listitem>an action with no parameter type and boolean state</listitem>
<listitem>an action with string parameter type and string state</listitem>
</itemizedlist>
<formalpara><title>Stateless</title>
<para>
A stateless action typically corresponds to an ordinary menu item.
</para>
<para>
Selecting such a menu item will activate the action (with no parameter).
</para>
</formalpara>
<formalpara><title>Boolean State</title>
<para>
An action with a boolean state will most typically be used with a "toggle"
or "switch" menu item. The state can be set directly, but activating the
action (with no parameter) results in the state being toggled.
</para>
<para>
Selecting a toggle menu item will activate the action. The menu item should
be rendered as "checked" when the state is true.
</para>
</formalpara>
<formalpara><title>String Parameter and State</title>
<para>
Actions with string parameters and state will most typically be used to
represent an enumerated choice over the items available for a group of
radio menu items. Activating the action with a string parameter is
equivalent to setting that parameter as the state.
</para>
<para>
Radio menu items, in addition to being associated with the action, will
have a target value. Selecting that menu item will result in activation
of the action with the target value as the parameter. The menu item should
be rendered as "selected" when the state of the action is equal to the
target value of the menu item.
</para>
</formalpara>
Queries the item at position @item_index in @model for the attribute
specified by @attribute.
If @expected_type is non-%NULL then it specifies the expected type of
the attribute. If it is %NULL then any type will be accepted.
If the attribute exists and matches @expected_type (or if the
expected type is unspecified) then the value is returned.
If the attribute does not exist, or does not match the expected type
then %NULL is returned.
the value of the attribute
the index of the item
the attribute to query
the expected type of the attribute, or %NULL
Gets all the attributes associated with the item in the menu model.
The #GMenuItem to query
Attributes on the item
Queries the item at position @item_index in @model for the link
specified by @link.
If the link exists, the linked #GMenuModel is returned. If the link
does not exist, %NULL is returned.
the linked #GMenuModel, or %NULL
the index of the item
the link to query
Gets all the links associated with the item in the menu model.
The #GMenuItem to query
Links from the item
Query the number of items in @model.
the number of items
Queries if @model is mutable.
An immutable #GMenuModel will never emit the #GMenuModel::items-changed
signal. Consumers of the model may make optimisations accordingly.
%TRUE if the model is mutable (ie: "items-changed" may be emitted).
Creates a #GMenuAttributeIter to iterate over the attributes of
the item at position @item_index in @model.
You must free the iterator with g_object_unref() when you are done.
a new #GMenuAttributeIter
the index of the item
Creates a #GMenuLinkIter to iterate over the links of the item at
position @item_index in @model.
You must free the iterator with g_object_unref() when you are done.
a new #GMenuLinkIter
the index of the item
Queries item at position @item_index in @model for the attribute
specified by @attribute.
If the attribute exists and matches the #GVariantType corresponding
to @format_string then @format_string is used to deconstruct the
value into the positional parameters and %TRUE is returned.
If the attribute does not exist, or it does exist but has the wrong
type, then the positional parameters are ignored and %FALSE is
returned.
This function is a mix of g_menu_model_get_item_attribute_value() and
g_variant_get(), followed by a g_variant_unref(). As such,
@format_string must make a complete copy of the data (since the
#GVariant may go away after the call to g_variant_unref()). In
particular, no '&' characters are allowed in @format_string.
%TRUE if the named attribute was found with the expected type
a #GMenuModel
the index of the item
the attribute to query
a #GVariant format string
Queries the item at position @item_index in @model for the attribute
specified by @attribute.
If @expected_type is non-%NULL then it specifies the expected type of
the attribute. If it is %NULL then any type will be accepted.
If the attribute exists and matches @expected_type (or if the
expected type is unspecified) then the value is returned.
If the attribute does not exist, or does not match the expected type
then %NULL is returned.
the value of the attribute
a #GMenuModel
the index of the item
the attribute to query
the expected type of the attribute, or %NULL
Queries the item at position @item_index in @model for the link
specified by @link.
If the link exists, the linked #GMenuModel is returned. If the link
does not exist, %NULL is returned.
the linked #GMenuModel, or %NULL
a #GMenuModel
the index of the item
the link to query
Query the number of items in @model.
the number of items
a #GMenuModel
Queries if @model is mutable.
An immutable #GMenuModel will never emit the #GMenuModel::items-changed
signal. Consumers of the model may make optimisations accordingly.
%TRUE if the model is mutable (ie: "items-changed" may be emitted).
a #GMenuModel
Requests emission of the #GMenuModel::items-changed signal on @model.
This function should never be called except by #GMenuModel
subclasses. Any other calls to this function will very likely lead
to a violation of the interface of the model.
The implementation should update its internal representation of the
menu before emitting the signal. The implementation should further
expect to receive queries about the new state of the menu (and
particularly added menu items) while signal handlers are running.
The implementation must dispatch this call directly from a mainloop
entry and not in response to calls -- particularly those from the
#GMenuModel API. Said another way: the menu must not change while
user code is running without returning to the mainloop.
a #GMenuModel
the position of the change
the number of items removed
the number of items added
Creates a #GMenuAttributeIter to iterate over the attributes of
the item at position @item_index in @model.
You must free the iterator with g_object_unref() when you are done.
a new #GMenuAttributeIter
a #GMenuModel
the index of the item
Creates a #GMenuLinkIter to iterate over the links of the item at
position @item_index in @model.
You must free the iterator with g_object_unref() when you are done.
a new #GMenuLinkIter
a #GMenuModel
the index of the item
Emitted when a change has occured to the menu.
The only changes that can occur to a menu is that items are removed
or added. Items may not change (except by being removed and added
back in the same location). This signal is capable of describing
both of those changes (at the same time).
The signal means that starting at the index @position, @removed
items were removed and @added items were added in their place. If
@removed is zero then only items were added. If @added is zero
then only items were removed.
As an example, if the menu contains items a, b, c, d (in that
order) and the signal (2, 1, 3) occurs then the new composition of
the menu will be a, b, _, _, _, d (with each _ representing some
new item).
Signal handlers may query the model (particularly the added items)
and expect to see the results of the modification that is being
reported. The signal is emitted after the modification.
the position of the change
the number of items removed
the number of items added
%TRUE if the model is mutable (ie: "items-changed" may be emitted).
the number of items
The #GMenuItem to query
Attributes on the item
a new #GMenuAttributeIter
the index of the item
the value of the attribute
the index of the item
the attribute to query
the expected type of the attribute, or %NULL
The #GMenuItem to query
Links from the item
a new #GMenuLinkIter
the index of the item
the linked #GMenuModel, or %NULL
the index of the item
the link to query
The #GMount interface represents user-visible mounts. Note, when
porting from GnomeVFS, #GMount is the moral equivalent of #GnomeVFSVolume.
#GMount is a "mounted" filesystem that you can access. Mounted is in
quotes because it's not the same as a unix mount, it might be a gvfs
mount, but you can still access the files on it if you use GIO. Might or
might not be related to a volume object.
Unmounting a #GMount instance is an asynchronous operation. For
more information about asynchronous operations, see #GAsyncResult
and #GTask. To unmount a #GMount instance, first call
g_mount_unmount_with_operation() with (at least) the #GMount instance and a
#GAsyncReadyCallback. The callback will be fired when the
operation has resolved (either with success or failure), and a
#GAsyncReady structure will be passed to the callback. That
callback should then call g_mount_unmount_with_operation_finish() with the #GMount
and the #GAsyncReady data to see if the operation was completed
successfully. If an @error is present when g_mount_unmount_with_operation_finish()
is called, then it will be filled with any error information.
Checks if @mount can be eject.
%TRUE if the @mount can be ejected.
Checks if @mount can be mounted.
%TRUE if the @mount can be unmounted.
Ejects a mount. This is an asynchronous operation, and is
finished by calling g_mount_eject_finish() with the @mount
and #GAsyncResult data returned in the @callback.
flags affecting the unmount if required for eject
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback, or %NULL.
user data passed to @callback.
Finishes ejecting a mount. If any errors occurred during the operation,
@error will be set to contain the errors and %FALSE will be returned.
%TRUE if the mount was successfully ejected. %FALSE otherwise.
a #GAsyncResult.
Ejects a mount. This is an asynchronous operation, and is
finished by calling g_mount_eject_with_operation_finish() with the @mount
and #GAsyncResult data returned in the @callback.
flags affecting the unmount if required for eject
a #GMountOperation or %NULL to avoid user interaction.
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback, or %NULL.
user data passed to @callback.
Finishes ejecting a mount. If any errors occurred during the operation,
@error will be set to contain the errors and %FALSE will be returned.
%TRUE if the mount was successfully ejected. %FALSE otherwise.
a #GAsyncResult.
Gets the default location of @mount. The default location of the given
@mount is a path that reflects the main entry point for the user (e.g.
the home directory, or the root of the volume).
a #GFile. The returned object should be unreffed with g_object_unref() when no longer needed.
Gets the drive for the @mount.
This is a convenience method for getting the #GVolume and then
using that object to get the #GDrive.
a #GDrive or %NULL if @mount is not associated with a volume or a drive. The returned object should be unreffed with g_object_unref() when no longer needed.
Gets the icon for @mount.
a #GIcon. The returned object should be unreffed with g_object_unref() when no longer needed.
Gets the name of @mount.
the name for the given @mount. The returned string should be freed with g_free() when no longer needed.
Gets the root directory on @mount.
a #GFile. The returned object should be unreffed with g_object_unref() when no longer needed.
Gets the sort key for @mount, if any.
Sorting key for @mount or %NULL if no such key is available.
Gets the symbolic icon for @mount.
a #GIcon. The returned object should be unreffed with g_object_unref() when no longer needed.
Gets the UUID for the @mount. The reference is typically based on
the file system UUID for the mount in question and should be
considered an opaque string. Returns %NULL if there is no UUID
available.
the UUID for @mount or %NULL if no UUID can be computed. The returned string should be freed with g_free() when no longer needed.
Gets the volume for the @mount.
a #GVolume or %NULL if @mount is not associated with a volume. The returned object should be unreffed with g_object_unref() when no longer needed.
Tries to guess the type of content stored on @mount. Returns one or
more textual identifiers of well-known content types (typically
prefixed with "x-content/"), e.g. x-content/image-dcf for camera
memory cards. See the <ulink url="http://www.freedesktop.org/wiki/Specifications/shared-mime-info-spec">shared-mime-info</ulink>
specification for more on x-content types.
This is an asynchronous operation (see
g_mount_guess_content_type_sync() for the synchronous version), and
is finished by calling g_mount_guess_content_type_finish() with the
@mount and #GAsyncResult data returned in the @callback.
Whether to force a rescan of the content. Otherwise a cached result will be used if available
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback
user data passed to @callback
Finishes guessing content types of @mount. If any errors occurred
during the operation, @error will be set to contain the errors and
%FALSE will be returned. In particular, you may get an
%G_IO_ERROR_NOT_SUPPORTED if the mount does not support content
guessing.
a %NULL-terminated array of content types or %NULL on error. Caller should free this array with g_strfreev() when done with it.
a #GAsyncResult
Tries to guess the type of content stored on @mount. Returns one or
more textual identifiers of well-known content types (typically
prefixed with "x-content/"), e.g. x-content/image-dcf for camera
memory cards. See the <ulink url="http://www.freedesktop.org/wiki/Specifications/shared-mime-info-spec">shared-mime-info</ulink>
specification for more on x-content types.
This is an synchronous operation and as such may block doing IO;
see g_mount_guess_content_type() for the asynchronous version.
a %NULL-terminated array of content types or %NULL on error. Caller should free this array with g_strfreev() when done with it.
Whether to force a rescan of the content. Otherwise a cached result will be used if available
optional #GCancellable object, %NULL to ignore
Remounts a mount. This is an asynchronous operation, and is
finished by calling g_mount_remount_finish() with the @mount
and #GAsyncResults data returned in the @callback.
Remounting is useful when some setting affecting the operation
of the volume has been changed, as these may need a remount to
take affect. While this is semantically equivalent with unmounting
and then remounting not all backends might need to actually be
unmounted.
flags affecting the operation
a #GMountOperation or %NULL to avoid user interaction.
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback, or %NULL.
user data passed to @callback.
Finishes remounting a mount. If any errors occurred during the operation,
@error will be set to contain the errors and %FALSE will be returned.
%TRUE if the mount was successfully remounted. %FALSE otherwise.
a #GAsyncResult.
Unmounts a mount. This is an asynchronous operation, and is
finished by calling g_mount_unmount_finish() with the @mount
and #GAsyncResult data returned in the @callback.
flags affecting the operation
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback, or %NULL.
user data passed to @callback.
Finishes unmounting a mount. If any errors occurred during the operation,
@error will be set to contain the errors and %FALSE will be returned.
%TRUE if the mount was successfully unmounted. %FALSE otherwise.
a #GAsyncResult.
Unmounts a mount. This is an asynchronous operation, and is
finished by calling g_mount_unmount_with_operation_finish() with the @mount
and #GAsyncResult data returned in the @callback.
flags affecting the operation
a #GMountOperation or %NULL to avoid user interaction.
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback, or %NULL.
user data passed to @callback.
Finishes unmounting a mount. If any errors occurred during the operation,
@error will be set to contain the errors and %FALSE will be returned.
%TRUE if the mount was successfully unmounted. %FALSE otherwise.
a #GAsyncResult.
Checks if @mount can be eject.
%TRUE if the @mount can be ejected.
a #GMount.
Checks if @mount can be mounted.
%TRUE if the @mount can be unmounted.
a #GMount.
Ejects a mount. This is an asynchronous operation, and is
finished by calling g_mount_eject_finish() with the @mount
and #GAsyncResult data returned in the @callback.
a #GMount.
flags affecting the unmount if required for eject
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback, or %NULL.
user data passed to @callback.
Finishes ejecting a mount. If any errors occurred during the operation,
@error will be set to contain the errors and %FALSE will be returned.
%TRUE if the mount was successfully ejected. %FALSE otherwise.
a #GMount.
a #GAsyncResult.
Ejects a mount. This is an asynchronous operation, and is
finished by calling g_mount_eject_with_operation_finish() with the @mount
and #GAsyncResult data returned in the @callback.
a #GMount.
flags affecting the unmount if required for eject
a #GMountOperation or %NULL to avoid user interaction.
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback, or %NULL.
user data passed to @callback.
Finishes ejecting a mount. If any errors occurred during the operation,
@error will be set to contain the errors and %FALSE will be returned.
%TRUE if the mount was successfully ejected. %FALSE otherwise.
a #GMount.
a #GAsyncResult.
Gets the default location of @mount. The default location of the given
@mount is a path that reflects the main entry point for the user (e.g.
the home directory, or the root of the volume).
a #GFile. The returned object should be unreffed with g_object_unref() when no longer needed.
a #GMount.
Gets the drive for the @mount.
This is a convenience method for getting the #GVolume and then
using that object to get the #GDrive.
a #GDrive or %NULL if @mount is not associated with a volume or a drive. The returned object should be unreffed with g_object_unref() when no longer needed.
a #GMount.
Gets the icon for @mount.
a #GIcon. The returned object should be unreffed with g_object_unref() when no longer needed.
a #GMount.
Gets the name of @mount.
the name for the given @mount. The returned string should be freed with g_free() when no longer needed.
a #GMount.
Gets the root directory on @mount.
a #GFile. The returned object should be unreffed with g_object_unref() when no longer needed.
a #GMount.
Gets the sort key for @mount, if any.
Sorting key for @mount or %NULL if no such key is available.
A #GMount.
Gets the symbolic icon for @mount.
a #GIcon. The returned object should be unreffed with g_object_unref() when no longer needed.
a #GMount.
Gets the UUID for the @mount. The reference is typically based on
the file system UUID for the mount in question and should be
considered an opaque string. Returns %NULL if there is no UUID
available.
the UUID for @mount or %NULL if no UUID can be computed. The returned string should be freed with g_free() when no longer needed.
a #GMount.
Gets the volume for the @mount.
a #GVolume or %NULL if @mount is not associated with a volume. The returned object should be unreffed with g_object_unref() when no longer needed.
a #GMount.
Tries to guess the type of content stored on @mount. Returns one or
more textual identifiers of well-known content types (typically
prefixed with "x-content/"), e.g. x-content/image-dcf for camera
memory cards. See the <ulink url="http://www.freedesktop.org/wiki/Specifications/shared-mime-info-spec">shared-mime-info</ulink>
specification for more on x-content types.
This is an asynchronous operation (see
g_mount_guess_content_type_sync() for the synchronous version), and
is finished by calling g_mount_guess_content_type_finish() with the
@mount and #GAsyncResult data returned in the @callback.
a #GMount
Whether to force a rescan of the content. Otherwise a cached result will be used if available
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback
user data passed to @callback
Finishes guessing content types of @mount. If any errors occurred
during the operation, @error will be set to contain the errors and
%FALSE will be returned. In particular, you may get an
%G_IO_ERROR_NOT_SUPPORTED if the mount does not support content
guessing.
a %NULL-terminated array of content types or %NULL on error. Caller should free this array with g_strfreev() when done with it.
a #GMount
a #GAsyncResult
Tries to guess the type of content stored on @mount. Returns one or
more textual identifiers of well-known content types (typically
prefixed with "x-content/"), e.g. x-content/image-dcf for camera
memory cards. See the <ulink url="http://www.freedesktop.org/wiki/Specifications/shared-mime-info-spec">shared-mime-info</ulink>
specification for more on x-content types.
This is an synchronous operation and as such may block doing IO;
see g_mount_guess_content_type() for the asynchronous version.
a %NULL-terminated array of content types or %NULL on error. Caller should free this array with g_strfreev() when done with it.
a #GMount
Whether to force a rescan of the content. Otherwise a cached result will be used if available
optional #GCancellable object, %NULL to ignore
Determines if @mount is shadowed. Applications or libraries should
avoid displaying @mount in the user interface if it is shadowed.
A mount is said to be shadowed if there exists one or more user
visible objects (currently #GMount objects) with a root that is
inside the root of @mount.
One application of shadow mounts is when exposing a single file
system that is used to address several logical volumes. In this
situation, a #GVolumeMonitor implementation would create two
#GVolume objects (for example, one for the camera functionality of
the device and one for a SD card reader on the device) with
activation URIs <literal>gphoto2://[usb:001,002]/store1/</literal>
and <literal>gphoto2://[usb:001,002]/store2/</literal>. When the
underlying mount (with root
<literal>gphoto2://[usb:001,002]/</literal>) is mounted, said
#GVolumeMonitor implementation would create two #GMount objects
(each with their root matching the corresponding volume activation
root) that would shadow the original mount.
The proxy monitor in GVfs 2.26 and later, automatically creates and
manage shadow mounts (and shadows the underlying mount) if the
activation root on a #GVolume is set.
%TRUE if @mount is shadowed.
A #GMount.
Remounts a mount. This is an asynchronous operation, and is
finished by calling g_mount_remount_finish() with the @mount
and #GAsyncResults data returned in the @callback.
Remounting is useful when some setting affecting the operation
of the volume has been changed, as these may need a remount to
take affect. While this is semantically equivalent with unmounting
and then remounting not all backends might need to actually be
unmounted.
a #GMount.
flags affecting the operation
a #GMountOperation or %NULL to avoid user interaction.
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback, or %NULL.
user data passed to @callback.
Finishes remounting a mount. If any errors occurred during the operation,
@error will be set to contain the errors and %FALSE will be returned.
%TRUE if the mount was successfully remounted. %FALSE otherwise.
a #GMount.
a #GAsyncResult.
Increments the shadow count on @mount. Usually used by
#GVolumeMonitor implementations when creating a shadow mount for
@mount, see g_mount_is_shadowed() for more information. The caller
will need to emit the #GMount::changed signal on @mount manually.
A #GMount.
Unmounts a mount. This is an asynchronous operation, and is
finished by calling g_mount_unmount_finish() with the @mount
and #GAsyncResult data returned in the @callback.
a #GMount.
flags affecting the operation
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback, or %NULL.
user data passed to @callback.
Finishes unmounting a mount. If any errors occurred during the operation,
@error will be set to contain the errors and %FALSE will be returned.
%TRUE if the mount was successfully unmounted. %FALSE otherwise.
a #GMount.
a #GAsyncResult.
Unmounts a mount. This is an asynchronous operation, and is
finished by calling g_mount_unmount_with_operation_finish() with the @mount
and #GAsyncResult data returned in the @callback.
a #GMount.
flags affecting the operation
a #GMountOperation or %NULL to avoid user interaction.
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback, or %NULL.
user data passed to @callback.
Finishes unmounting a mount. If any errors occurred during the operation,
@error will be set to contain the errors and %FALSE will be returned.
%TRUE if the mount was successfully unmounted. %FALSE otherwise.
a #GMount.
a #GAsyncResult.
Decrements the shadow count on @mount. Usually used by
#GVolumeMonitor implementations when destroying a shadow mount for
@mount, see g_mount_is_shadowed() for more information. The caller
will need to emit the #GMount::changed signal on @mount manually.
A #GMount.
Emitted when the mount has been changed.
This signal is emitted when the #GMount is about to be
unmounted.
This signal is emitted when the #GMount have been
unmounted. If the recipient is holding references to the
object they should release them so the object can be
finalized.
Interface for implementing operations for mounts.
a #GFile. The returned object should be unreffed with g_object_unref() when no longer needed.
the name for the given @mount. The returned string should be freed with g_free() when no longer needed.
a #GIcon. The returned object should be unreffed with g_object_unref() when no longer needed.
the UUID for @mount or %NULL if no UUID can be computed. The returned string should be freed with g_free() when no longer needed.
a #GVolume or %NULL if @mount is not associated with a volume. The returned object should be unreffed with g_object_unref() when no longer needed.
a #GDrive or %NULL if @mount is not associated with a volume or a drive. The returned object should be unreffed with g_object_unref() when no longer needed.
%TRUE if the @mount can be unmounted.
%TRUE if the @mount can be ejected.
flags affecting the operation
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback, or %NULL.
user data passed to @callback.
%TRUE if the mount was successfully unmounted. %FALSE otherwise.
a #GAsyncResult.
flags affecting the unmount if required for eject
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback, or %NULL.
user data passed to @callback.
%TRUE if the mount was successfully ejected. %FALSE otherwise.
a #GAsyncResult.
flags affecting the operation
a #GMountOperation or %NULL to avoid user interaction.
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback, or %NULL.
user data passed to @callback.
%TRUE if the mount was successfully remounted. %FALSE otherwise.
a #GAsyncResult.
Whether to force a rescan of the content. Otherwise a cached result will be used if available
optional #GCancellable object, %NULL to ignore
a #GAsyncReadyCallback
user data passed to @callback
a %NULL-terminated array of content types or %NULL on error. Caller should free this array with g_strfreev() when done with it.
a #GAsyncResult
a %NULL-terminated array of content types or %NULL on error. Caller should free this array with g_strfreev() when done with it.
Whether to force a rescan of the content. Otherwise a cached result will be used if available
optional #GCancellable object, %NULL to ignore
flags affecting the operation
a #GMountOperation or %NULL to avoid user interaction.
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback, or %NULL.
user data passed to @callback.
%TRUE if the mount was successfully unmounted. %FALSE otherwise.
a #GAsyncResult.
flags affecting the unmount if required for eject
a #GMountOperation or %NULL to avoid user interaction.
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback, or %NULL.
user data passed to @callback.
%TRUE if the mount was successfully ejected. %FALSE otherwise.
a #GAsyncResult.
a #GFile. The returned object should be unreffed with g_object_unref() when no longer needed.
Sorting key for @mount or %NULL if no such key is available.
a #GIcon. The returned object should be unreffed with g_object_unref() when no longer needed.
Flags used when mounting a mount.
No flags set.
#GMountOperation provides a mechanism for interacting with the user.
It can be used for authenticating mountable operations, such as loop
mounting files, hard drive partitions or server locations. It can
also be used to ask the user questions or show a list of applications
preventing unmount or eject operations from completing.
Note that #GMountOperation is used for more than just #GMount
objects – for example it is also used in g_drive_start() and
g_drive_stop().
Users should instantiate a subclass of this that implements all the
various callbacks to show the required dialogs, such as
#GtkMountOperation. If no user interaction is desired (for example
when automounting filesystems at login time), usually %NULL can be
passed, see each method taking a #GMountOperation for details.
Creates a new mount operation.
a #GMountOperation.
Emits the #GMountOperation::reply signal.
a #GMountOperationResult
Check to see whether the mount operation is being used
for an anonymous user.
%TRUE if mount operation is anonymous.
a #GMountOperation.
Gets a choice from the mount operation.
an integer containing an index of the user's choice from the choice's list, or %0.
a #GMountOperation.
Gets the domain of the mount operation.
a string set to the domain.
a #GMountOperation.
Gets a password from the mount operation.
a string containing the password within @op.
a #GMountOperation.
Gets the state of saving passwords for the mount operation.
a #GPasswordSave flag.
a #GMountOperation.
Get the user name from the mount operation.
a string containing the user name.
a #GMountOperation.
Emits the #GMountOperation::reply signal.
a #GMountOperation
a #GMountOperationResult
Sets the mount operation to use an anonymous user if @anonymous is %TRUE.
a #GMountOperation.
boolean value.
Sets a default choice for the mount operation.
a #GMountOperation.
an integer.
Sets the mount operation's domain.
a #GMountOperation.
the domain to set.
Sets the mount operation's password to @password.
a #GMountOperation.
password to set.
Sets the state of saving passwords for the mount operation.
a #GMountOperation.
a set of #GPasswordSave flags.
Sets the user name within @op to @username.
a #GMountOperation.
input username.
Whether to use an anonymous user when authenticating.
The index of the user's choice when a question is asked during the
mount operation. See the #GMountOperation::ask-question signal.
The domain to use for the mount operation.
The password that is used for authentication when carrying out
the mount operation.
Determines if and how the password information should be saved.
The user name that is used for authentication when carrying out
the mount operation.
Emitted by the backend when e.g. a device becomes unavailable
while a mount operation is in progress.
Implementations of GMountOperation should handle this signal
by dismissing open password dialogs.
Emitted when a mount operation asks the user for a password.
If the message contains a line break, the first line should be
presented as a heading. For example, it may be used as the
primary text in a #GtkMessageDialog.
string containing a message to display to the user.
string containing the default user name.
string containing the default domain.
a set of #GAskPasswordFlags.
Emitted when asking the user a question and gives a list of
choices for the user to choose from.
If the message contains a line break, the first line should be
presented as a heading. For example, it may be used as the
primary text in a #GtkMessageDialog.
string containing a message to display to the user.
an array of strings for each possible choice.
Emitted when the user has replied to the mount operation.
a #GMountOperationResult indicating how the request was handled
Emitted when one or more processes are blocking an operation
e.g. unmounting/ejecting a #GMount or stopping a #GDrive.
Note that this signal may be emitted several times to update the
list of blocking processes as processes close files. The
application should only respond with g_mount_operation_reply() to
the latest signal (setting #GMountOperation:choice to the choice
the user made).
If the message contains a line break, the first line should be
presented as a heading. For example, it may be used as the
primary text in a #GtkMessageDialog.
string containing a message to display to the user.
an array of #GPid for processes blocking the operation.
an array of strings for each possible choice.
Emitted when an unmount operation has been busy for more than some time
(typically 1.5 seconds).
When unmounting or ejecting a volume, the kernel might need to flush
pending data in its buffers to the volume stable storage, and this operation
can take a considerable amount of time. This signal may be emitted several
times as long as the unmount operation is outstanding, and then one
last time when the operation is completed, with @bytes_left set to zero.
Implementations of GMountOperation should handle this signal by
showing an UI notification, and then dismiss it, or show another notification
of completion, when @bytes_left reaches zero.
If the message contains a line break, the first line should be
presented as a heading. For example, it may be used as the
primary text in a #GtkMessageDialog.
string containing a mesage to display to the user
the estimated time left before the operation completes, in microseconds, or -1
the amount of bytes to be written before the operation completes (or -1 if such amount is not known), or zero if the operation is completed
a #GMountOperationResult
#GMountOperationResult is returned as a result when a request for
information is send by the mounting operation.
The request was fulfilled and the user specified data is now available
The user requested the mount operation to be aborted
The request was unhandled (i.e. not implemented)
Flags used when an unmounting a mount.
No flags set.
Unmount even if there are outstanding file operations on the mount.
Extension point for network status monitoring functionality.
See <link linkend="extending-gio">Extending GIO</link>.
#GNetworkAddress provides an easy way to resolve a hostname and
then attempt to connect to that host, handling the possibility of
multiple IP addresses and multiple address families.
See #GSocketConnectable for and example of using the connectable
interface.
Creates a new #GSocketConnectable for connecting to the given
@hostname and @port.
the new #GNetworkAddress
the hostname
the port
Creates a new #GSocketConnectable for connecting to the given
@hostname and @port. May fail and return %NULL in case
parsing @host_and_port fails.
@host_and_port may be in any of a number of recognised formats; an IPv6
address, an IPv4 address, or a domain name (in which case a DNS
lookup is performed). Quoting with [] is supported for all address
types. A port override may be specified in the usual way with a
colon.
If no port is specified in @host_and_port then @default_port will be
used as the port number to connect to.
In general, @host_and_port is expected to be provided by the user
(allowing them to give the hostname, and a port overide if necessary)
and @default_port is expected to be provided by the application.
(The port component of @host_and_port can also be specified as a
service name rather than as a numeric port, but this functionality
is deprecated, because it depends on the contents of /etc/services,
which is generally quite sparse on platforms other than Linux.)
the new #GNetworkAddress, or %NULL on error
the hostname and optionally a port
the default port if not in @host_and_port
Creates a new #GSocketConnectable for connecting to the given
@uri. May fail and return %NULL in case parsing @uri fails.
Using this rather than g_network_address_new() or
g_network_address_parse() allows #GSocketClient to determine
when to use application-specific proxy protocols.
the new #GNetworkAddress, or %NULL on error
the hostname and optionally a port
The default port if none is found in the URI
Gets @addr's hostname. This might be either UTF-8 or ASCII-encoded,
depending on what @addr was created with.
@addr's hostname
a #GNetworkAddress
Gets @addr's port number
@addr's port (which may be 0)
a #GNetworkAddress
Gets @addr's scheme
@addr's scheme (%NULL if not built from URI)
a #GNetworkAddress
#GNetworkMonitor provides an easy-to-use cross-platform API
for monitoring network connectivity. On Linux, the implementation
is based on the kernel's netlink interface.
Gets the default #GNetworkMonitor for the system.
a #GNetworkMonitor
Attempts to determine whether or not the host pointed to by
@connectable can be reached, without actually trying to connect to
it.
This may return %TRUE even when #GNetworkMonitor:network-available
is %FALSE, if, for example, @monitor can determine that
@connectable refers to a host on a local network.
If @monitor believes that an attempt to connect to @connectable
will succeed, it will return %TRUE. Otherwise, it will return
%FALSE and set @error to an appropriate error (such as
%G_IO_ERROR_HOST_UNREACHABLE).
Note that although this does not attempt to connect to
@connectable, it may still block for a brief period of time (eg,
trying to do multicast DNS on the local network), so if you do not
want to block, you should use g_network_monitor_can_reach_async().
%TRUE if @connectable is reachable, %FALSE if not.
a #GSocketConnectable
a #GCancellable, or %NULL
Asynchronously attempts to determine whether or not the host
pointed to by @connectable can be reached, without actually
trying to connect to it.
For more details, see g_network_monitor_can_reach().
When the operation is finished, @callback will be called.
You can then call g_network_monitor_can_reach_finish()
to get the result of the operation.
a #GSocketConnectable
a #GCancellable, or %NULL
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
Finishes an async network connectivity test.
See g_network_monitor_can_reach_async().
%TRUE if network is reachable, %FALSE if not.
a #GAsyncResult
Attempts to determine whether or not the host pointed to by
@connectable can be reached, without actually trying to connect to
it.
This may return %TRUE even when #GNetworkMonitor:network-available
is %FALSE, if, for example, @monitor can determine that
@connectable refers to a host on a local network.
If @monitor believes that an attempt to connect to @connectable
will succeed, it will return %TRUE. Otherwise, it will return
%FALSE and set @error to an appropriate error (such as
%G_IO_ERROR_HOST_UNREACHABLE).
Note that although this does not attempt to connect to
@connectable, it may still block for a brief period of time (eg,
trying to do multicast DNS on the local network), so if you do not
want to block, you should use g_network_monitor_can_reach_async().
%TRUE if @connectable is reachable, %FALSE if not.
a #GNetworkMonitor
a #GSocketConnectable
a #GCancellable, or %NULL
Asynchronously attempts to determine whether or not the host
pointed to by @connectable can be reached, without actually
trying to connect to it.
For more details, see g_network_monitor_can_reach().
When the operation is finished, @callback will be called.
You can then call g_network_monitor_can_reach_finish()
to get the result of the operation.
a #GNetworkMonitor
a #GSocketConnectable
a #GCancellable, or %NULL
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
Finishes an async network connectivity test.
See g_network_monitor_can_reach_async().
%TRUE if network is reachable, %FALSE if not.
a #GNetworkMonitor
a #GAsyncResult
Checks if the network is available. "Available" here means that the
system has a default route available for at least one of IPv4 or
IPv6. It does not necessarily imply that the public Internet is
reachable. See #GNetworkMonitor:network-available for more details.
whether the network is available
the #GNetworkMonitor
Whether the network is considered available. That is, whether the
system has a default route for at least one of IPv4 or IPv6.
Real-world networks are of course much more complicated than
this; the machine may be connected to a wifi hotspot that
requires payment before allowing traffic through, or may be
connected to a functioning router that has lost its own upstream
connectivity. Some hosts might only be accessible when a VPN is
active. Other hosts might only be accessible when the VPN is
<emphasis>not</emphasis> active. Thus, it is best to use
g_network_monitor_can_reach() or
g_network_monitor_can_reach_async() to test for reachability on a
host-by-host basis. (On the other hand, when the property is
%FALSE, the application can reasonably expect that no remote
hosts at all are reachable, and should indicate this to the user
in its UI.)
See also #GNetworkMonitor::network-changed.
Emitted when the network configuration changes. If @available is
%TRUE, then some hosts may be reachable that were not reachable
before, while others that were reachable before may no longer be
reachable. If @available is %FALSE, then no remote hosts are
reachable.
the current value of #GNetworkMonitor:network-available
%TRUE if @connectable is reachable, %FALSE if not.
a #GSocketConnectable
a #GCancellable, or %NULL
a #GSocketConnectable
a #GCancellable, or %NULL
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
%TRUE if network is reachable, %FALSE if not.
a #GAsyncResult
Like #GNetworkAddress does with hostnames, #GNetworkService
provides an easy way to resolve a SRV record, and then attempt to
connect to one of the hosts that implements that service, handling
service priority/weighting, multiple IP addresses, and multiple
address families.
See #GSrvTarget for more information about SRV records, and see
#GSocketConnectable for and example of using the connectable
interface.
Creates a new #GNetworkService representing the given @service,
@protocol, and @domain. This will initially be unresolved; use the
#GSocketConnectable interface to resolve it.
a new #GNetworkService
the service type to look up (eg, "ldap")
the networking protocol to use for @service (eg, "tcp")
the DNS domain to look up the service in
Gets the domain that @srv serves. This might be either UTF-8 or
ASCII-encoded, depending on what @srv was created with.
@srv's domain name
a #GNetworkService
Gets @srv's protocol name (eg, "tcp").
@srv's protocol name
a #GNetworkService
Get's the URI scheme used to resolve proxies. By default, the service name
is used as scheme.
@srv's scheme name
a #GNetworkService
Gets @srv's service name (eg, "ldap").
@srv's service name
a #GNetworkService
Set's the URI scheme used to resolve proxies. By default, the service name
is used as scheme.
a #GNetworkService
a URI scheme
#GOutputStream has functions to write to a stream (g_output_stream_write()),
to close a stream (g_output_stream_close()) and to flush pending writes
(g_output_stream_flush()).
To copy the content of an input stream to an output stream without
manually handling the reads and writes, use g_output_stream_splice().
All of these functions have async variants too.
Requests an asynchronous close of the stream, releasing resources
related to it. When the operation is finished @callback will be
called. You can then call g_output_stream_close_finish() to get
the result of the operation.
For behaviour details see g_output_stream_close().
The asyncronous methods have a default fallback that uses threads
to implement asynchronicity, so they are optional for inheriting
classes. However, if you override one you must override all.
the io priority of the request.
optional cancellable object
callback to call when the request is satisfied
the data to pass to callback function
Closes an output stream.
%TRUE if stream was successfully closed, %FALSE otherwise.
a #GAsyncResult.
Forces a write of all user-space buffered data for the given
@stream. Will block during the operation. Closing the stream will
implicitly cause a flush.
This function is optional for inherited classes.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
%TRUE on success, %FALSE on error
optional cancellable object
Forces an asynchronous write of all user-space buffered data for
the given @stream.
For behaviour details see g_output_stream_flush().
When the operation is finished @callback will be
called. You can then call g_output_stream_flush_finish() to get the
result of the operation.
the io priority of the request.
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
Finishes flushing an output stream.
%TRUE if flush operation succeeded, %FALSE otherwise.
a GAsyncResult.
Splices an input stream into an output stream.
a #gssize containing the size of the data spliced, or -1 if an error occurred. Note that if the number of bytes spliced is greater than %G_MAXSSIZE, then that will be returned, and there is no way to determine the actual number of bytes spliced.
a #GInputStream.
a set of #GOutputStreamSpliceFlags.
optional #GCancellable object, %NULL to ignore.
Splices a stream asynchronously.
When the operation is finished @callback will be called.
You can then call g_output_stream_splice_finish() to get the
result of the operation.
For the synchronous, blocking version of this function, see
g_output_stream_splice().
a #GInputStream.
a set of #GOutputStreamSpliceFlags.
the io priority of the request.
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback.
user data passed to @callback.
Finishes an asynchronous stream splice operation.
a #gssize of the number of bytes spliced. Note that if the number of bytes spliced is greater than %G_MAXSSIZE, then that will be returned, and there is no way to determine the actual number of bytes spliced.
a #GAsyncResult.
Request an asynchronous write of @count bytes from @buffer into
the stream. When the operation is finished @callback will be called.
You can then call g_output_stream_write_finish() to get the result of the
operation.
During an async request no other sync and async calls are allowed,
and will result in %G_IO_ERROR_PENDING errors.
A value of @count larger than %G_MAXSSIZE will cause a
%G_IO_ERROR_INVALID_ARGUMENT error.
On success, the number of bytes written will be passed to the
@callback. It is not an error if this is not the same as the
requested size, as it can happen e.g. on a partial I/O error,
but generally we try to write as many bytes as requested.
You are guaranteed that this method will never fail with
%G_IO_ERROR_WOULD_BLOCK - if @stream can't accept more data, the
method will just wait until this changes.
Any outstanding I/O request with higher priority (lower numerical
value) will be executed before an outstanding request with lower
priority. Default priority is %G_PRIORITY_DEFAULT.
The asyncronous methods have a default fallback that uses threads
to implement asynchronicity, so they are optional for inheriting
classes. However, if you override one you must override all.
For the synchronous, blocking version of this function, see
g_output_stream_write().
the buffer containing the data to write.
the number of bytes to write
the io priority of the request.
optional #GCancellable object, %NULL to ignore.
callback to call when the request is satisfied
the data to pass to callback function
Finishes a stream write operation.
a #gssize containing the number of bytes written to the stream.
a #GAsyncResult.
Tries to write @count bytes from @buffer into the stream. Will block
during the operation.
If count is 0, returns 0 and does nothing. A value of @count
larger than %G_MAXSSIZE will cause a %G_IO_ERROR_INVALID_ARGUMENT error.
On success, the number of bytes written to the stream is returned.
It is not an error if this is not the same as the requested size, as it
can happen e.g. on a partial I/O error, or if there is not enough
storage in the stream. All writes block until at least one byte
is written or an error occurs; 0 is never returned (unless
@count is 0).
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned. If an
operation was partially finished when the operation was cancelled the
partial result will be returned, without an error.
On error -1 is returned and @error is set accordingly.
Number of bytes written, or -1 on error
the buffer containing the data to write.
the number of bytes to write
optional cancellable object
Clears the pending flag on @stream.
output stream
Closes the stream, releasing resources related to it.
Once the stream is closed, all other operations will return %G_IO_ERROR_CLOSED.
Closing a stream multiple times will not return an error.
Closing a stream will automatically flush any outstanding buffers in the
stream.
Streams will be automatically closed when the last reference
is dropped, but you might want to call this function to make sure
resources are released as early as possible.
Some streams might keep the backing store of the stream (e.g. a file descriptor)
open after the stream is closed. See the documentation for the individual
stream for details.
On failure the first error that happened will be reported, but the close
operation will finish as much as possible. A stream that failed to
close will still return %G_IO_ERROR_CLOSED for all operations. Still, it
is important to check and report the error to the user, otherwise
there might be a loss of data as all data might not be written.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
Cancelling a close will still leave the stream closed, but there some streams
can use a faster close that doesn't block to e.g. check errors. On
cancellation (as with any error) there is no guarantee that all written
data will reach the target.
%TRUE on success, %FALSE on failure
A #GOutputStream.
optional cancellable object
Requests an asynchronous close of the stream, releasing resources
related to it. When the operation is finished @callback will be
called. You can then call g_output_stream_close_finish() to get
the result of the operation.
For behaviour details see g_output_stream_close().
The asyncronous methods have a default fallback that uses threads
to implement asynchronicity, so they are optional for inheriting
classes. However, if you override one you must override all.
A #GOutputStream.
the io priority of the request.
optional cancellable object
callback to call when the request is satisfied
the data to pass to callback function
Closes an output stream.
%TRUE if stream was successfully closed, %FALSE otherwise.
a #GOutputStream.
a #GAsyncResult.
Forces a write of all user-space buffered data for the given
@stream. Will block during the operation. Closing the stream will
implicitly cause a flush.
This function is optional for inherited classes.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
%TRUE on success, %FALSE on error
a #GOutputStream.
optional cancellable object
Forces an asynchronous write of all user-space buffered data for
the given @stream.
For behaviour details see g_output_stream_flush().
When the operation is finished @callback will be
called. You can then call g_output_stream_flush_finish() to get the
result of the operation.
a #GOutputStream.
the io priority of the request.
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
Finishes flushing an output stream.
%TRUE if flush operation succeeded, %FALSE otherwise.
a #GOutputStream.
a GAsyncResult.
Checks if an ouput stream has pending actions.
%TRUE if @stream has pending actions.
a #GOutputStream.
Checks if an output stream has already been closed.
%TRUE if @stream is closed. %FALSE otherwise.
a #GOutputStream.
Checks if an output stream is being closed. This can be
used inside e.g. a flush implementation to see if the
flush (or other i/o operation) is called from within
the closing operation.
%TRUE if @stream is being closed. %FALSE otherwise.
a #GOutputStream.
Sets @stream to have actions pending. If the pending flag is
already set or @stream is closed, it will return %FALSE and set
@error.
%TRUE if pending was previously unset and is now set.
a #GOutputStream.
Splices an input stream into an output stream.
a #gssize containing the size of the data spliced, or -1 if an error occurred. Note that if the number of bytes spliced is greater than %G_MAXSSIZE, then that will be returned, and there is no way to determine the actual number of bytes spliced.
a #GOutputStream.
a #GInputStream.
a set of #GOutputStreamSpliceFlags.
optional #GCancellable object, %NULL to ignore.
Splices a stream asynchronously.
When the operation is finished @callback will be called.
You can then call g_output_stream_splice_finish() to get the
result of the operation.
For the synchronous, blocking version of this function, see
g_output_stream_splice().
a #GOutputStream.
a #GInputStream.
a set of #GOutputStreamSpliceFlags.
the io priority of the request.
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback.
user data passed to @callback.
Finishes an asynchronous stream splice operation.
a #gssize of the number of bytes spliced. Note that if the number of bytes spliced is greater than %G_MAXSSIZE, then that will be returned, and there is no way to determine the actual number of bytes spliced.
a #GOutputStream.
a #GAsyncResult.
Tries to write @count bytes from @buffer into the stream. Will block
during the operation.
If count is 0, returns 0 and does nothing. A value of @count
larger than %G_MAXSSIZE will cause a %G_IO_ERROR_INVALID_ARGUMENT error.
On success, the number of bytes written to the stream is returned.
It is not an error if this is not the same as the requested size, as it
can happen e.g. on a partial I/O error, or if there is not enough
storage in the stream. All writes block until at least one byte
is written or an error occurs; 0 is never returned (unless
@count is 0).
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned. If an
operation was partially finished when the operation was cancelled the
partial result will be returned, without an error.
On error -1 is returned and @error is set accordingly.
Number of bytes written, or -1 on error
a #GOutputStream.
the buffer containing the data to write.
the number of bytes to write
optional cancellable object
Tries to write @count bytes from @buffer into the stream. Will block
during the operation.
This function is similar to g_output_stream_write(), except it tries to
write as many bytes as requested, only stopping on an error.
On a successful write of @count bytes, %TRUE is returned, and @bytes_written
is set to @count.
If there is an error during the operation %FALSE is returned and @error
is set to indicate the error status, @bytes_written is updated to contain
the number of bytes written into the stream before the error occurred.
%TRUE on success, %FALSE if there was an error
a #GOutputStream.
the buffer containing the data to write.
the number of bytes to write
location to store the number of bytes that was written to the stream
optional #GCancellable object, %NULL to ignore.
Request an asynchronous write of @count bytes from @buffer into
the stream. When the operation is finished @callback will be called.
You can then call g_output_stream_write_finish() to get the result of the
operation.
During an async request no other sync and async calls are allowed,
and will result in %G_IO_ERROR_PENDING errors.
A value of @count larger than %G_MAXSSIZE will cause a
%G_IO_ERROR_INVALID_ARGUMENT error.
On success, the number of bytes written will be passed to the
@callback. It is not an error if this is not the same as the
requested size, as it can happen e.g. on a partial I/O error,
but generally we try to write as many bytes as requested.
You are guaranteed that this method will never fail with
%G_IO_ERROR_WOULD_BLOCK - if @stream can't accept more data, the
method will just wait until this changes.
Any outstanding I/O request with higher priority (lower numerical
value) will be executed before an outstanding request with lower
priority. Default priority is %G_PRIORITY_DEFAULT.
The asyncronous methods have a default fallback that uses threads
to implement asynchronicity, so they are optional for inheriting
classes. However, if you override one you must override all.
For the synchronous, blocking version of this function, see
g_output_stream_write().
A #GOutputStream.
the buffer containing the data to write.
the number of bytes to write
the io priority of the request.
optional #GCancellable object, %NULL to ignore.
callback to call when the request is satisfied
the data to pass to callback function
Tries to write the data from @bytes into the stream. Will block
during the operation.
If @bytes is 0-length, returns 0 and does nothing. A #GBytes larger
than %G_MAXSSIZE will cause a %G_IO_ERROR_INVALID_ARGUMENT error.
On success, the number of bytes written to the stream is returned.
It is not an error if this is not the same as the requested size, as it
can happen e.g. on a partial I/O error, or if there is not enough
storage in the stream. All writes block until at least one byte
is written or an error occurs; 0 is never returned (unless
the size of @bytes is 0).
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned. If an
operation was partially finished when the operation was cancelled the
partial result will be returned, without an error.
On error -1 is returned and @error is set accordingly.
Number of bytes written, or -1 on error
a #GOutputStream.
the #GBytes to write
optional cancellable object
Request an asynchronous write of the data in @bytes to the stream.
When the operation is finished @callback will be called. You can
then call g_output_stream_write_bytes_finish() to get the result of
the operation.
During an async request no other sync and async calls are allowed,
and will result in %G_IO_ERROR_PENDING errors.
A #GBytes larger than %G_MAXSSIZE will cause a
%G_IO_ERROR_INVALID_ARGUMENT error.
On success, the number of bytes written will be passed to the
@callback. It is not an error if this is not the same as the
requested size, as it can happen e.g. on a partial I/O error,
but generally we try to write as many bytes as requested.
You are guaranteed that this method will never fail with
%G_IO_ERROR_WOULD_BLOCK - if @stream can't accept more data, the
method will just wait until this changes.
Any outstanding I/O request with higher priority (lower numerical
value) will be executed before an outstanding request with lower
priority. Default priority is %G_PRIORITY_DEFAULT.
For the synchronous, blocking version of this function, see
g_output_stream_write_bytes().
A #GOutputStream.
The bytes to write
the io priority of the request.
optional #GCancellable object, %NULL to ignore.
callback to call when the request is satisfied
the data to pass to callback function
Finishes a stream write-from-#GBytes operation.
a #gssize containing the number of bytes written to the stream.
a #GOutputStream.
a #GAsyncResult.
Finishes a stream write operation.
a #gssize containing the number of bytes written to the stream.
a #GOutputStream.
a #GAsyncResult.
Number of bytes written, or -1 on error
the buffer containing the data to write.
the number of bytes to write
optional cancellable object
a #gssize containing the size of the data spliced, or -1 if an error occurred. Note that if the number of bytes spliced is greater than %G_MAXSSIZE, then that will be returned, and there is no way to determine the actual number of bytes spliced.
a #GInputStream.
a set of #GOutputStreamSpliceFlags.
optional #GCancellable object, %NULL to ignore.
%TRUE on success, %FALSE on error
optional cancellable object
the buffer containing the data to write.
the number of bytes to write
the io priority of the request.
optional #GCancellable object, %NULL to ignore.
callback to call when the request is satisfied
the data to pass to callback function
a #gssize containing the number of bytes written to the stream.
a #GAsyncResult.
a #GInputStream.
a set of #GOutputStreamSpliceFlags.
the io priority of the request.
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback.
user data passed to @callback.
a #gssize of the number of bytes spliced. Note that if the number of bytes spliced is greater than %G_MAXSSIZE, then that will be returned, and there is no way to determine the actual number of bytes spliced.
a #GAsyncResult.
the io priority of the request.
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
%TRUE if flush operation succeeded, %FALSE otherwise.
a GAsyncResult.
the io priority of the request.
optional cancellable object
callback to call when the request is satisfied
the data to pass to callback function
%TRUE if stream was successfully closed, %FALSE otherwise.
a #GAsyncResult.
GOutputStreamSpliceFlags determine how streams should be spliced.
Do not close either stream.
Close the source stream after the splice.
Close the target stream after the splice.
Structure used for scatter/gather data output.
You generally pass in an array of #GOutputVector<!-- -->s
and the operation will use all the buffers as if they were
one buffer.
Extension point for proxy functionality.
See <link linkend="extending-gio">Extending GIO</link>.
Extension point for proxy resolving functionality.
See <link linkend="extending-gio">Extending GIO</link>.
#GPasswordSave is used to indicate the lifespan of a saved password.
#Gvfs stores passwords in the Gnome keyring when this flag allows it
to, and later retrieves it again from there.
never save a password.
save a password for the session.
save a password permanently.
A #GPermission represents the status of the caller's permission to
perform a certain action.
You can query if the action is currently allowed and if it is
possible to acquire the permission so that the action will be allowed
in the future.
There is also an API to actually acquire the permission and one to
release it.
As an example, a #GPermission might represent the ability for the
user to write to a #GSettings object. This #GPermission object could
then be used to decide if it is appropriate to show a "Click here to
unlock" button in a dialog and to provide the mechanism to invoke
when that button is clicked.
Attempts to acquire the permission represented by @permission.
The precise method by which this happens depends on the permission
and the underlying authentication mechanism. A simple example is
that a dialog may appear asking the user to enter their password.
You should check with g_permission_get_can_acquire() before calling
this function.
If the permission is acquired then %TRUE is returned. Otherwise,
%FALSE is returned and @error is set appropriately.
This call is blocking, likely for a very long time (in the case that
user interaction is required). See g_permission_acquire_async() for
the non-blocking version.
%TRUE if the permission was successfully acquired
a #GCancellable, or %NULL
Attempts to acquire the permission represented by @permission.
This is the first half of the asynchronous version of
g_permission_acquire().
a #GCancellable, or %NULL
the #GAsyncReadyCallback to call when done
the user data to pass to @callback
Collects the result of attempting to acquire the permission
represented by @permission.
This is the second half of the asynchronous version of
g_permission_acquire().
%TRUE if the permission was successfully acquired
the #GAsyncResult given to the #GAsyncReadyCallback
Attempts to release the permission represented by @permission.
The precise method by which this happens depends on the permission
and the underlying authentication mechanism. In most cases the
permission will be dropped immediately without further action.
You should check with g_permission_get_can_release() before calling
this function.
If the permission is released then %TRUE is returned. Otherwise,
%FALSE is returned and @error is set appropriately.
This call is blocking, likely for a very long time (in the case that
user interaction is required). See g_permission_release_async() for
the non-blocking version.
%TRUE if the permission was successfully released
a #GCancellable, or %NULL
Attempts to release the permission represented by @permission.
This is the first half of the asynchronous version of
g_permission_release().
a #GCancellable, or %NULL
the #GAsyncReadyCallback to call when done
the user data to pass to @callback
Collects the result of attempting to release the permission
represented by @permission.
This is the second half of the asynchronous version of
g_permission_release().
%TRUE if the permission was successfully released
the #GAsyncResult given to the #GAsyncReadyCallback
Attempts to acquire the permission represented by @permission.
The precise method by which this happens depends on the permission
and the underlying authentication mechanism. A simple example is
that a dialog may appear asking the user to enter their password.
You should check with g_permission_get_can_acquire() before calling
this function.
If the permission is acquired then %TRUE is returned. Otherwise,
%FALSE is returned and @error is set appropriately.
This call is blocking, likely for a very long time (in the case that
user interaction is required). See g_permission_acquire_async() for
the non-blocking version.
%TRUE if the permission was successfully acquired
a #GPermission instance
a #GCancellable, or %NULL
Attempts to acquire the permission represented by @permission.
This is the first half of the asynchronous version of
g_permission_acquire().
a #GPermission instance
a #GCancellable, or %NULL
the #GAsyncReadyCallback to call when done
the user data to pass to @callback
Collects the result of attempting to acquire the permission
represented by @permission.
This is the second half of the asynchronous version of
g_permission_acquire().
%TRUE if the permission was successfully acquired
a #GPermission instance
the #GAsyncResult given to the #GAsyncReadyCallback
Gets the value of the 'allowed' property. This property is %TRUE if
the caller currently has permission to perform the action that
@permission represents the permission to perform.
the value of the 'allowed' property
a #GPermission instance
Gets the value of the 'can-acquire' property. This property is %TRUE
if it is generally possible to acquire the permission by calling
g_permission_acquire().
the value of the 'can-acquire' property
a #GPermission instance
Gets the value of the 'can-release' property. This property is %TRUE
if it is generally possible to release the permission by calling
g_permission_release().
the value of the 'can-release' property
a #GPermission instance
This function is called by the #GPermission implementation to update
the properties of the permission. You should never call this
function except from a #GPermission implementation.
GObject notify signals are generated, as appropriate.
a #GPermission instance
the new value for the 'allowed' property
the new value for the 'can-acquire' property
the new value for the 'can-release' property
Attempts to release the permission represented by @permission.
The precise method by which this happens depends on the permission
and the underlying authentication mechanism. In most cases the
permission will be dropped immediately without further action.
You should check with g_permission_get_can_release() before calling
this function.
If the permission is released then %TRUE is returned. Otherwise,
%FALSE is returned and @error is set appropriately.
This call is blocking, likely for a very long time (in the case that
user interaction is required). See g_permission_release_async() for
the non-blocking version.
%TRUE if the permission was successfully released
a #GPermission instance
a #GCancellable, or %NULL
Attempts to release the permission represented by @permission.
This is the first half of the asynchronous version of
g_permission_release().
a #GPermission instance
a #GCancellable, or %NULL
the #GAsyncReadyCallback to call when done
the user data to pass to @callback
Collects the result of attempting to release the permission
represented by @permission.
This is the second half of the asynchronous version of
g_permission_release().
%TRUE if the permission was successfully released
a #GPermission instance
the #GAsyncResult given to the #GAsyncReadyCallback
%TRUE if the caller currently has permission to perform the action that
@permission represents the permission to perform.
%TRUE if it is generally possible to acquire the permission by calling
g_permission_acquire().
%TRUE if it is generally possible to release the permission by calling
g_permission_release().
%TRUE if the permission was successfully acquired
a #GCancellable, or %NULL
a #GCancellable, or %NULL
the #GAsyncReadyCallback to call when done
the user data to pass to @callback
%TRUE if the permission was successfully acquired
the #GAsyncResult given to the #GAsyncReadyCallback
%TRUE if the permission was successfully released
a #GCancellable, or %NULL
a #GCancellable, or %NULL
the #GAsyncReadyCallback to call when done
the user data to pass to @callback
%TRUE if the permission was successfully released
the #GAsyncResult given to the #GAsyncReadyCallback
#GPollableInputStream is implemented by #GInputStreams that
can be polled for readiness to read. This can be used when
interfacing with a non-GIO API that expects
UNIX-file-descriptor-style asynchronous I/O rather than GIO-style.
Checks if @stream is actually pollable. Some classes may implement
#GPollableInputStream but have only certain instances of that class
be pollable. If this method returns %FALSE, then the behavior of
other #GPollableInputStream methods is undefined.
For any given stream, the value returned by this method is constant;
a stream cannot switch from pollable to non-pollable or vice versa.
%TRUE if @stream is pollable, %FALSE if not.
Creates a #GSource that triggers when @stream can be read, or
@cancellable is triggered or an error occurs. The callback on the
source is of the #GPollableSourceFunc type.
As with g_pollable_input_stream_is_readable(), it is possible that
the stream may not actually be readable even after the source
triggers, so you should use g_pollable_input_stream_read_nonblocking()
rather than g_input_stream_read() from the callback.
a new #GSource
a #GCancellable, or %NULL
Checks if @stream can be read.
Note that some stream types may not be able to implement this 100%
reliably, and it is possible that a call to g_input_stream_read()
after this returns %TRUE would still block. To guarantee
non-blocking behavior, you should always use
g_pollable_input_stream_read_nonblocking(), which will return a
%G_IO_ERROR_WOULD_BLOCK error rather than blocking.
%TRUE if @stream is readable, %FALSE if not. If an error has occurred on @stream, this will result in g_pollable_input_stream_is_readable() returning %TRUE, and the next attempt to read will return the error.
Attempts to read up to @count bytes from @stream into @buffer, as
with g_input_stream_read(). If @stream is not currently readable,
this will immediately return %G_IO_ERROR_WOULD_BLOCK, and you can
use g_pollable_input_stream_create_source() to create a #GSource
that will be triggered when @stream is readable.
Note that since this method never blocks, you cannot actually
use @cancellable to cancel it. However, it will return an error
if @cancellable has already been cancelled when you call, which
may happen if you call this method after a source triggers due
to having been cancelled.
the number of bytes read, or -1 on error (including %G_IO_ERROR_WOULD_BLOCK).
a buffer to read data into (which should be at least @count bytes long).
the number of bytes you want to read
Checks if @stream is actually pollable. Some classes may implement
#GPollableInputStream but have only certain instances of that class
be pollable. If this method returns %FALSE, then the behavior of
other #GPollableInputStream methods is undefined.
For any given stream, the value returned by this method is constant;
a stream cannot switch from pollable to non-pollable or vice versa.
%TRUE if @stream is pollable, %FALSE if not.
a #GPollableInputStream.
Creates a #GSource that triggers when @stream can be read, or
@cancellable is triggered or an error occurs. The callback on the
source is of the #GPollableSourceFunc type.
As with g_pollable_input_stream_is_readable(), it is possible that
the stream may not actually be readable even after the source
triggers, so you should use g_pollable_input_stream_read_nonblocking()
rather than g_input_stream_read() from the callback.
a new #GSource
a #GPollableInputStream.
a #GCancellable, or %NULL
Checks if @stream can be read.
Note that some stream types may not be able to implement this 100%
reliably, and it is possible that a call to g_input_stream_read()
after this returns %TRUE would still block. To guarantee
non-blocking behavior, you should always use
g_pollable_input_stream_read_nonblocking(), which will return a
%G_IO_ERROR_WOULD_BLOCK error rather than blocking.
%TRUE if @stream is readable, %FALSE if not. If an error has occurred on @stream, this will result in g_pollable_input_stream_is_readable() returning %TRUE, and the next attempt to read will return the error.
a #GPollableInputStream.
Attempts to read up to @count bytes from @stream into @buffer, as
with g_input_stream_read(). If @stream is not currently readable,
this will immediately return %G_IO_ERROR_WOULD_BLOCK, and you can
use g_pollable_input_stream_create_source() to create a #GSource
that will be triggered when @stream is readable.
Note that since this method never blocks, you cannot actually
use @cancellable to cancel it. However, it will return an error
if @cancellable has already been cancelled when you call, which
may happen if you call this method after a source triggers due
to having been cancelled.
the number of bytes read, or -1 on error (including %G_IO_ERROR_WOULD_BLOCK).
a #GPollableInputStream
a buffer to read data into (which should be at least @count bytes long).
the number of bytes you want to read
a #GCancellable, or %NULL
The interface for pollable input streams.
The default implementation of @can_poll always returns %TRUE.
The default implementation of @read_nonblocking calls
g_pollable_input_stream_is_readable(), and then calls
g_input_stream_read() if it returns %TRUE. This means you only need
to override it if it is possible that your @is_readable
implementation may return %TRUE when the stream is not actually
readable.
%TRUE if @stream is pollable, %FALSE if not.
%TRUE if @stream is readable, %FALSE if not. If an error has occurred on @stream, this will result in g_pollable_input_stream_is_readable() returning %TRUE, and the next attempt to read will return the error.
a new #GSource
a #GCancellable, or %NULL
the number of bytes read, or -1 on error (including %G_IO_ERROR_WOULD_BLOCK).
a buffer to read data into (which should be at least @count bytes long).
the number of bytes you want to read
#GPollableOutputStream is implemented by #GOutputStreams that
can be polled for readiness to write. This can be used when
interfacing with a non-GIO API that expects
UNIX-file-descriptor-style asynchronous I/O rather than GIO-style.
Checks if @stream is actually pollable. Some classes may implement
#GPollableOutputStream but have only certain instances of that
class be pollable. If this method returns %FALSE, then the behavior
of other #GPollableOutputStream methods is undefined.
For any given stream, the value returned by this method is constant;
a stream cannot switch from pollable to non-pollable or vice versa.
%TRUE if @stream is pollable, %FALSE if not.
Creates a #GSource that triggers when @stream can be written, or
@cancellable is triggered or an error occurs. The callback on the
source is of the #GPollableSourceFunc type.
As with g_pollable_output_stream_is_writable(), it is possible that
the stream may not actually be writable even after the source
triggers, so you should use g_pollable_output_stream_write_nonblocking()
rather than g_output_stream_write() from the callback.
a new #GSource
a #GCancellable, or %NULL
Checks if @stream can be written.
Note that some stream types may not be able to implement this 100%
reliably, and it is possible that a call to g_output_stream_write()
after this returns %TRUE would still block. To guarantee
non-blocking behavior, you should always use
g_pollable_output_stream_write_nonblocking(), which will return a
%G_IO_ERROR_WOULD_BLOCK error rather than blocking.
%TRUE if @stream is writable, %FALSE if not. If an error has occurred on @stream, this will result in g_pollable_output_stream_is_writable() returning %TRUE, and the next attempt to write will return the error.
Attempts to write up to @count bytes from @buffer to @stream, as
with g_output_stream_write(). If @stream is not currently writable,
this will immediately return %G_IO_ERROR_WOULD_BLOCK, and you can
use g_pollable_output_stream_create_source() to create a #GSource
that will be triggered when @stream is writable.
Note that since this method never blocks, you cannot actually
use @cancellable to cancel it. However, it will return an error
if @cancellable has already been cancelled when you call, which
may happen if you call this method after a source triggers due
to having been cancelled.
the number of bytes written, or -1 on error (including %G_IO_ERROR_WOULD_BLOCK).
a buffer to write data from
the number of bytes you want to write
Checks if @stream is actually pollable. Some classes may implement
#GPollableOutputStream but have only certain instances of that
class be pollable. If this method returns %FALSE, then the behavior
of other #GPollableOutputStream methods is undefined.
For any given stream, the value returned by this method is constant;
a stream cannot switch from pollable to non-pollable or vice versa.
%TRUE if @stream is pollable, %FALSE if not.
a #GPollableOutputStream.
Creates a #GSource that triggers when @stream can be written, or
@cancellable is triggered or an error occurs. The callback on the
source is of the #GPollableSourceFunc type.
As with g_pollable_output_stream_is_writable(), it is possible that
the stream may not actually be writable even after the source
triggers, so you should use g_pollable_output_stream_write_nonblocking()
rather than g_output_stream_write() from the callback.
a new #GSource
a #GPollableOutputStream.
a #GCancellable, or %NULL
Checks if @stream can be written.
Note that some stream types may not be able to implement this 100%
reliably, and it is possible that a call to g_output_stream_write()
after this returns %TRUE would still block. To guarantee
non-blocking behavior, you should always use
g_pollable_output_stream_write_nonblocking(), which will return a
%G_IO_ERROR_WOULD_BLOCK error rather than blocking.
%TRUE if @stream is writable, %FALSE if not. If an error has occurred on @stream, this will result in g_pollable_output_stream_is_writable() returning %TRUE, and the next attempt to write will return the error.
a #GPollableOutputStream.
Attempts to write up to @count bytes from @buffer to @stream, as
with g_output_stream_write(). If @stream is not currently writable,
this will immediately return %G_IO_ERROR_WOULD_BLOCK, and you can
use g_pollable_output_stream_create_source() to create a #GSource
that will be triggered when @stream is writable.
Note that since this method never blocks, you cannot actually
use @cancellable to cancel it. However, it will return an error
if @cancellable has already been cancelled when you call, which
may happen if you call this method after a source triggers due
to having been cancelled.
the number of bytes written, or -1 on error (including %G_IO_ERROR_WOULD_BLOCK).
a #GPollableOutputStream
a buffer to write data from
the number of bytes you want to write
a #GCancellable, or %NULL
The interface for pollable output streams.
The default implementation of @can_poll always returns %TRUE.
The default implementation of @write_nonblocking calls
g_pollable_output_stream_is_writable(), and then calls
g_output_stream_write() if it returns %TRUE. This means you only
need to override it if it is possible that your @is_writable
implementation may return %TRUE when the stream is not actually
writable.
%TRUE if @stream is pollable, %FALSE if not.
%TRUE if @stream is writable, %FALSE if not. If an error has occurred on @stream, this will result in g_pollable_output_stream_is_writable() returning %TRUE, and the next attempt to write will return the error.
a new #GSource
a #GCancellable, or %NULL
the number of bytes written, or -1 on error (including %G_IO_ERROR_WOULD_BLOCK).
a buffer to write data from
the number of bytes you want to write
This is the function type of the callback used for the #GSource
returned by g_pollable_input_stream_create_source() and
g_pollable_output_stream_create_source().
it should return %FALSE if the source should be removed.
the #GPollableInputStream or #GPollableOutputStream
data passed in by the user.
A #GPropertyAction is a way to get a #GAction with a state value
reflecting and controlling the value of a #GObject property.
The state of the action will correspond to the value of the property.
Changing it will change the property (assuming the requested value
matches the requirements as specified in the #GParamSpec).
Only the most common types are presently supported. Booleans are
mapped to booleans, strings to strings, signed/unsigned integers to
int32/uint32 and floats and doubles to doubles.
If the property is an enum then the state will be string-typed and
conversion will automatically be performed between the enum value and
"nick" string as per the #GEnumValue table.
Flags types are not currently supported.
Properties of object types, boxed types and pointer types are not
supported and probably never will be.
Properties of #GVariant types are not currently supported.
If the property is boolean-valued then the action will have a NULL
parameter type, and activating the action (with no parameter) will
toggle the value of the property.
In all other cases, the parameter type will correspond to the type of
the property.
The general idea here is to reduce the number of locations where a
particular piece of state is kept (and therefore has to be
synchronised between). #GPropertyAction does not have a separate
state that is kept in sync with the property value -- its state
<em>is</em> the property value.
For example, it might be useful to create a #GAction corresponding to
the "visible-child-name" property of a #GtkStack so that the current
page can be switched from a menu. The active radio indication in the
menu is then directly determined from the active page of the
#GtkStack.
An anti-example would be binding the "active-id" property on a
#GtkComboBox. This is because the state of the combobox itself is
probably uninteresting and is actually being used to control
something else.
Another anti-example would be to bind to the "visible-child-name"
property of a #GtkStack if this value is actually stored in
#GSettings. In that case, the real source of the value is
#GSettings. If you want a #GAction to control a setting stored in
#GSettings, see g_settings_create_action() instead, and possibly
combine its use with g_settings_bind().
Creates a #GAction corresponding to the value of property
@property_name on @object.
The property must be existent and readable and writable (and not
construct-only).
This function takes a reference on @object and doesn't release it
until the action is destroyed.
a new #GPropertyAction
the name of the action to create
the object that has the property to wrap
the name of the property
If @action is currently enabled.
If the action is disabled then calls to g_action_activate() and
g_action_change_state() have no effect.
The name of the action. This is mostly meaningful for identifying
the action once it has been added to a #GActionMap.
The object to wrap a property on.
The object must be a non-%NULL #GObject with properties.
The type of the parameter that must be given when activating the
action.
The name of the property to wrap on the object.
The property must exist on the passed-in object and it must be
readable and writable (and not construct-only).
The state of the action, or %NULL if the action is stateless.
The #GVariantType of the state that the action has, or %NULL if the
action is stateless.
A #GProxy handles connecting to a remote host via a given type of
proxy server. It is implemented by the 'gio-proxy' extension point.
The extensions are named after their proxy protocol name. As an
example, a SOCKS5 proxy implementation can be retrieved with the
name 'socks5' using the function
g_io_extension_point_get_extension_by_name().
Lookup "gio-proxy" extension point for a proxy implementation that supports
specified protocol.
return a #GProxy or NULL if protocol is not supported.
the proxy protocol name (e.g. http, socks, etc)
Given @connection to communicate with a proxy (eg, a
#GSocketConnection that is connected to the proxy server), this
does the necessary handshake to connect to @proxy_address, and if
required, wraps the #GIOStream to handle proxy payload.
a #GIOStream that will replace @connection. This might be the same as @connection, in which case a reference will be added.
a #GIOStream
a #GProxyAddress
a #GCancellable
Asynchronous version of g_proxy_connect().
a #GIOStream
a #GProxyAddress
a #GCancellable
a #GAsyncReadyCallback
callback data
See g_proxy_connect().
a #GIOStream.
a #GAsyncResult
Some proxy protocols expect to be passed a hostname, which they
will resolve to an IP address themselves. Others, like SOCKS4, do
not allow this. This function will return %FALSE if @proxy is
implementing such a protocol. When %FALSE is returned, the caller
should resolve the destination hostname first, and then pass a
#GProxyAddress containing the stringified IP address to
g_proxy_connect() or g_proxy_connect_async().
%TRUE if hostname resolution is supported.
Given @connection to communicate with a proxy (eg, a
#GSocketConnection that is connected to the proxy server), this
does the necessary handshake to connect to @proxy_address, and if
required, wraps the #GIOStream to handle proxy payload.
a #GIOStream that will replace @connection. This might be the same as @connection, in which case a reference will be added.
a #GProxy
a #GIOStream
a #GProxyAddress
a #GCancellable
Asynchronous version of g_proxy_connect().
a #GProxy
a #GIOStream
a #GProxyAddress
a #GCancellable
a #GAsyncReadyCallback
callback data
See g_proxy_connect().
a #GIOStream.
a #GProxy
a #GAsyncResult
Some proxy protocols expect to be passed a hostname, which they
will resolve to an IP address themselves. Others, like SOCKS4, do
not allow this. This function will return %FALSE if @proxy is
implementing such a protocol. When %FALSE is returned, the caller
should resolve the destination hostname first, and then pass a
#GProxyAddress containing the stringified IP address to
g_proxy_connect() or g_proxy_connect_async().
%TRUE if hostname resolution is supported.
a #GProxy
Support for proxied #GInetSocketAddress.
Creates a new #GProxyAddress for @inetaddr with @protocol that should
tunnel through @dest_hostname and @dest_port.
(Note that this method doesn't set the #GProxyAddress:uri or
#GProxyAddress:destination-protocol fields; use g_object_new()
directly if you want to set those.)
a new #GProxyAddress
The proxy server #GInetAddress.
The proxy server port.
The proxy protocol to support, in lower case (e.g. socks, http).
The destination hostname the proxy should tunnel to.
The destination port to tunnel to.
The username to authenticate to the proxy server (or %NULL).
The password to authenticate to the proxy server (or %NULL).
Gets @proxy's destination hostname; that is, the name of the host
that will be connected to via the proxy, not the name of the proxy
itself.
the @proxy's destination hostname
a #GProxyAddress
Gets @proxy's destination port; that is, the port on the
destination host that will be connected to via the proxy, not the
port number of the proxy itself.
the @proxy's destination port
a #GProxyAddress
Gets the protocol that is being spoken to the destination
server; eg, "http" or "ftp".
the @proxy's destination protocol
a #GProxyAddress
Gets @proxy's password.
the @proxy's password
a #GProxyAddress
Gets @proxy's protocol. eg, "socks" or "http"
the @proxy's protocol
a #GProxyAddress
Gets the proxy URI that @proxy was constructed from.
the @proxy's URI, or %NULL if unknown
a #GProxyAddress
Gets @proxy's username.
the @proxy's username
a #GProxyAddress
The protocol being spoke to the destination host, or %NULL if
the #GProxyAddress doesn't know.
The URI string that the proxy was constructed from (or %NULL
if the creator didn't specify this).
A subclass of #GSocketAddressEnumerator that takes another address
enumerator and wraps its results in #GProxyAddress<!-- -->es as
directed by the default #GProxyResolver.
The default port to use if #GProxyAddressEnumerator:uri does not
specify one.
The proxy resolver to use.
Provides an interface for handling proxy connection and payload.
a #GIOStream that will replace @connection. This might be the same as @connection, in which case a reference will be added.
a #GIOStream
a #GProxyAddress
a #GCancellable
a #GIOStream
a #GProxyAddress
a #GCancellable
a #GAsyncReadyCallback
callback data
a #GIOStream.
a #GAsyncResult
%TRUE if hostname resolution is supported.
#GProxyResolver provides synchronous and asynchronous network proxy
resolution. #GProxyResolver is used within #GSocketClient through
the method g_socket_connectable_proxy_enumerate().
Gets the default #GProxyResolver for the system.
the default #GProxyResolver.
Checks if @resolver can be used on this system. (This is used
internally; g_proxy_resolver_get_default() will only return a proxy
resolver that returns %TRUE for this method.)
%TRUE if @resolver is supported.
Looks into the system proxy configuration to determine what proxy,
if any, to use to connect to @uri. The returned proxy URIs are of the
form <literal><protocol>://[user[:password]@]host:port</literal>
or <literal>direct://</literal>, where <protocol> could be
http, rtsp, socks or other proxying protocol.
If you don't know what network protocol is being used on the
socket, you should use <literal>none</literal> as the URI protocol.
In this case, the resolver might still return a generic proxy type
(such as SOCKS), but would not return protocol-specific proxy types
(such as http).
<literal>direct://</literal> is used when no proxy is needed.
Direct connection should not be attempted unless it is part of the
returned array of proxies.
A NULL-terminated array of proxy URIs. Must be freed with g_strfreev().
a URI representing the destination to connect to
a #GCancellable, or %NULL
Asynchronous lookup of proxy. See g_proxy_resolver_lookup() for more
details.
a URI representing the destination to connect to
a #GCancellable, or %NULL
callback to call after resolution completes
data for @callback
Call this function to obtain the array of proxy URIs when
g_proxy_resolver_lookup_async() is complete. See
g_proxy_resolver_lookup() for more details.
A NULL-terminated array of proxy URIs. Must be freed with g_strfreev().
the result passed to your #GAsyncReadyCallback
Checks if @resolver can be used on this system. (This is used
internally; g_proxy_resolver_get_default() will only return a proxy
resolver that returns %TRUE for this method.)
%TRUE if @resolver is supported.
a #GProxyResolver
Looks into the system proxy configuration to determine what proxy,
if any, to use to connect to @uri. The returned proxy URIs are of the
form <literal><protocol>://[user[:password]@]host:port</literal>
or <literal>direct://</literal>, where <protocol> could be
http, rtsp, socks or other proxying protocol.
If you don't know what network protocol is being used on the
socket, you should use <literal>none</literal> as the URI protocol.
In this case, the resolver might still return a generic proxy type
(such as SOCKS), but would not return protocol-specific proxy types
(such as http).
<literal>direct://</literal> is used when no proxy is needed.
Direct connection should not be attempted unless it is part of the
returned array of proxies.
A NULL-terminated array of proxy URIs. Must be freed with g_strfreev().
a #GProxyResolver
a URI representing the destination to connect to
a #GCancellable, or %NULL
Asynchronous lookup of proxy. See g_proxy_resolver_lookup() for more
details.
a #GProxyResolver
a URI representing the destination to connect to
a #GCancellable, or %NULL
callback to call after resolution completes
data for @callback
Call this function to obtain the array of proxy URIs when
g_proxy_resolver_lookup_async() is complete. See
g_proxy_resolver_lookup() for more details.
A NULL-terminated array of proxy URIs. Must be freed with g_strfreev().
a #GProxyResolver
the result passed to your #GAsyncReadyCallback
%TRUE if @resolver is supported.
A NULL-terminated array of proxy URIs. Must be freed with g_strfreev().
a URI representing the destination to connect to
a #GCancellable, or %NULL
a URI representing the destination to connect to
a #GCancellable, or %NULL
callback to call after resolution completes
data for @callback
A NULL-terminated array of proxy URIs. Must be freed with g_strfreev().
the result passed to your #GAsyncReadyCallback
Changes the size of the memory block pointed to by @data to
@size bytes.
The function should have the same semantics as realloc().
a pointer to the reallocated memory
memory block to reallocate
size to reallocate @data to
The GRemoteActionGroup interface is implemented by #GActionGroup
instances that either transmit action invocations to other processes
or receive action invocations in the local process from other
processes.
The interface has <literal>_full</literal> variants of the two
methods on #GActionGroup used to activate actions:
g_action_group_activate_action() and
g_action_group_change_action_state(). These variants allow a
"platform data" #GVariant to be specified: a dictionary providing
context for the action invocation (for example: timestamps, startup
notification IDs, etc).
#GDBusActionGroup implements #GRemoteActionGroup. This provides a
mechanism to send platform data for action invocations over D-Bus.
Additionally, g_dbus_connection_export_action_group() will check if
the exported #GActionGroup implements #GRemoteActionGroup and use the
<literal>_full</literal> variants of the calls if available. This
provides a mechanism by which to receive platform data for action
invocations that arrive by way of D-Bus.
Activates the remote action.
This is the same as g_action_group_activate_action() except that it
allows for provision of "platform data" to be sent along with the
activation request. This typically contains details such as the user
interaction timestamp or startup notification information.
@platform_data must be non-%NULL and must have the type
%G_VARIANT_TYPE_VARDICT. If it is floating, it will be consumed.
the name of the action to activate
the optional parameter to the activation
the platform data to send
Changes the state of a remote action.
This is the same as g_action_group_change_action_state() except that
it allows for provision of "platform data" to be sent along with the
state change request. This typically contains details such as the
user interaction timestamp or startup notification information.
@platform_data must be non-%NULL and must have the type
%G_VARIANT_TYPE_VARDICT. If it is floating, it will be consumed.
the name of the action to change the state of
the new requested value for the state
the platform data to send
Activates the remote action.
This is the same as g_action_group_activate_action() except that it
allows for provision of "platform data" to be sent along with the
activation request. This typically contains details such as the user
interaction timestamp or startup notification information.
@platform_data must be non-%NULL and must have the type
%G_VARIANT_TYPE_VARDICT. If it is floating, it will be consumed.
a #GDBusActionGroup
the name of the action to activate
the optional parameter to the activation
the platform data to send
Changes the state of a remote action.
This is the same as g_action_group_change_action_state() except that
it allows for provision of "platform data" to be sent along with the
state change request. This typically contains details such as the
user interaction timestamp or startup notification information.
@platform_data must be non-%NULL and must have the type
%G_VARIANT_TYPE_VARDICT. If it is floating, it will be consumed.
a #GRemoteActionGroup
the name of the action to change the state of
the new requested value for the state
the platform data to send
The virtual function table for #GRemoteActionGroup.
the name of the action to activate
the optional parameter to the activation
the platform data to send
the name of the action to change the state of
the new requested value for the state
the platform data to send
#GResolver provides cancellable synchronous and asynchronous DNS
resolution, for hostnames (g_resolver_lookup_by_address(),
g_resolver_lookup_by_name() and their async variants) and SRV
(service) records (g_resolver_lookup_service()).
#GNetworkAddress and #GNetworkService provide wrappers around
#GResolver functionality that also implement #GSocketConnectable,
making it easy to connect to a remote host/service.
Frees @addresses (which should be the return value from
g_resolver_lookup_by_name() or g_resolver_lookup_by_name_finish()).
(This is a convenience method; you can also simply free the results
by hand.)
a #GList of #GInetAddress
Frees @targets (which should be the return value from
g_resolver_lookup_service() or g_resolver_lookup_service_finish()).
(This is a convenience method; you can also simply free the
results by hand.)
a #GList of #GSrvTarget
Gets the default #GResolver. You should unref it when you are done
with it. #GResolver may use its reference count as a hint about how
many threads it should allocate for concurrent DNS resolutions.
the default #GResolver.
Synchronously reverse-resolves @address to determine its
associated hostname.
If the DNS resolution fails, @error (if non-%NULL) will be set to
a value from #GResolverError.
If @cancellable is non-%NULL, it can be used to cancel the
operation, in which case @error (if non-%NULL) will be set to
%G_IO_ERROR_CANCELLED.
a hostname (either ASCII-only, or in ASCII-encoded form), or %NULL on error.
the address to reverse-resolve
a #GCancellable, or %NULL
Begins asynchronously reverse-resolving @address to determine its
associated hostname, and eventually calls @callback, which must
call g_resolver_lookup_by_address_finish() to get the final result.
the address to reverse-resolve
a #GCancellable, or %NULL
callback to call after resolution completes
data for @callback
Retrieves the result of a previous call to
g_resolver_lookup_by_address_async().
If the DNS resolution failed, @error (if non-%NULL) will be set to
a value from #GResolverError. If the operation was cancelled,
@error will be set to %G_IO_ERROR_CANCELLED.
a hostname (either ASCII-only, or in ASCII-encoded form), or %NULL on error.
the result passed to your #GAsyncReadyCallback
Synchronously resolves @hostname to determine its associated IP
address(es). @hostname may be an ASCII-only or UTF-8 hostname, or
the textual form of an IP address (in which case this just becomes
a wrapper around g_inet_address_new_from_string()).
On success, g_resolver_lookup_by_name() will return a #GList of
#GInetAddress, sorted in order of preference and guaranteed to not
contain duplicates. That is, if using the result to connect to
@hostname, you should attempt to connect to the first address
first, then the second if the first fails, etc. If you are using
the result to listen on a socket, it is appropriate to add each
result using e.g. g_socket_listener_add_address().
If the DNS resolution fails, @error (if non-%NULL) will be set to a
value from #GResolverError.
If @cancellable is non-%NULL, it can be used to cancel the
operation, in which case @error (if non-%NULL) will be set to
%G_IO_ERROR_CANCELLED.
If you are planning to connect to a socket on the resolved IP
address, it may be easier to create a #GNetworkAddress and use its
#GSocketConnectable interface.
a #GList of #GInetAddress, or %NULL on error. You must unref each of the addresses and free the list when you are done with it. (You can use g_resolver_free_addresses() to do this.)
the hostname to look up
a #GCancellable, or %NULL
Begins asynchronously resolving @hostname to determine its
associated IP address(es), and eventually calls @callback, which
must call g_resolver_lookup_by_name_finish() to get the result.
See g_resolver_lookup_by_name() for more details.
the hostname to look up the address of
a #GCancellable, or %NULL
callback to call after resolution completes
data for @callback
Retrieves the result of a call to
g_resolver_lookup_by_name_async().
If the DNS resolution failed, @error (if non-%NULL) will be set to
a value from #GResolverError. If the operation was cancelled,
@error will be set to %G_IO_ERROR_CANCELLED.
a #GList of #GInetAddress, or %NULL on error. See g_resolver_lookup_by_name() for more details.
the result passed to your #GAsyncReadyCallback
Synchronously performs a DNS record lookup for the given @rrname and returns
a list of records as #GVariant tuples. See #GResolverRecordType for
information on what the records contain for each @record_type.
If the DNS resolution fails, @error (if non-%NULL) will be set to
a value from #GResolverError.
If @cancellable is non-%NULL, it can be used to cancel the
operation, in which case @error (if non-%NULL) will be set to
%G_IO_ERROR_CANCELLED.
a #GList of #GVariant, or %NULL on error. You must free each of the records and the list when you are done with it. (You can use g_list_free_full() with g_variant_unref() to do this.)
the DNS name to lookup the record for
the type of DNS record to lookup
a #GCancellable, or %NULL
Begins asynchronously performing a DNS lookup for the given
@rrname, and eventually calls @callback, which must call
g_resolver_lookup_records_finish() to get the final result. See
g_resolver_lookup_records() for more details.
the DNS name to lookup the record for
the type of DNS record to lookup
a #GCancellable, or %NULL
callback to call after resolution completes
data for @callback
Retrieves the result of a previous call to
g_resolver_lookup_records_async(). Returns a list of records as #GVariant
tuples. See #GResolverRecordType for information on what the records contain.
If the DNS resolution failed, @error (if non-%NULL) will be set to
a value from #GResolverError. If the operation was cancelled,
@error will be set to %G_IO_ERROR_CANCELLED.
a #GList of #GVariant, or %NULL on error. You must free each of the records and the list when you are done with it. (You can use g_list_free_full() with g_variant_unref() to do this.)
the result passed to your #GAsyncReadyCallback
Retrieves the result of a previous call to
g_resolver_lookup_service_async().
If the DNS resolution failed, @error (if non-%NULL) will be set to
a value from #GResolverError. If the operation was cancelled,
@error will be set to %G_IO_ERROR_CANCELLED.
a #GList of #GSrvTarget, or %NULL on error. See g_resolver_lookup_service() for more details.
the result passed to your #GAsyncReadyCallback
Synchronously reverse-resolves @address to determine its
associated hostname.
If the DNS resolution fails, @error (if non-%NULL) will be set to
a value from #GResolverError.
If @cancellable is non-%NULL, it can be used to cancel the
operation, in which case @error (if non-%NULL) will be set to
%G_IO_ERROR_CANCELLED.
a hostname (either ASCII-only, or in ASCII-encoded form), or %NULL on error.
a #GResolver
the address to reverse-resolve
a #GCancellable, or %NULL
Begins asynchronously reverse-resolving @address to determine its
associated hostname, and eventually calls @callback, which must
call g_resolver_lookup_by_address_finish() to get the final result.
a #GResolver
the address to reverse-resolve
a #GCancellable, or %NULL
callback to call after resolution completes
data for @callback
Retrieves the result of a previous call to
g_resolver_lookup_by_address_async().
If the DNS resolution failed, @error (if non-%NULL) will be set to
a value from #GResolverError. If the operation was cancelled,
@error will be set to %G_IO_ERROR_CANCELLED.
a hostname (either ASCII-only, or in ASCII-encoded form), or %NULL on error.
a #GResolver
the result passed to your #GAsyncReadyCallback
Synchronously resolves @hostname to determine its associated IP
address(es). @hostname may be an ASCII-only or UTF-8 hostname, or
the textual form of an IP address (in which case this just becomes
a wrapper around g_inet_address_new_from_string()).
On success, g_resolver_lookup_by_name() will return a #GList of
#GInetAddress, sorted in order of preference and guaranteed to not
contain duplicates. That is, if using the result to connect to
@hostname, you should attempt to connect to the first address
first, then the second if the first fails, etc. If you are using
the result to listen on a socket, it is appropriate to add each
result using e.g. g_socket_listener_add_address().
If the DNS resolution fails, @error (if non-%NULL) will be set to a
value from #GResolverError.
If @cancellable is non-%NULL, it can be used to cancel the
operation, in which case @error (if non-%NULL) will be set to
%G_IO_ERROR_CANCELLED.
If you are planning to connect to a socket on the resolved IP
address, it may be easier to create a #GNetworkAddress and use its
#GSocketConnectable interface.
a #GList of #GInetAddress, or %NULL on error. You must unref each of the addresses and free the list when you are done with it. (You can use g_resolver_free_addresses() to do this.)
a #GResolver
the hostname to look up
a #GCancellable, or %NULL
Begins asynchronously resolving @hostname to determine its
associated IP address(es), and eventually calls @callback, which
must call g_resolver_lookup_by_name_finish() to get the result.
See g_resolver_lookup_by_name() for more details.
a #GResolver
the hostname to look up the address of
a #GCancellable, or %NULL
callback to call after resolution completes
data for @callback
Retrieves the result of a call to
g_resolver_lookup_by_name_async().
If the DNS resolution failed, @error (if non-%NULL) will be set to
a value from #GResolverError. If the operation was cancelled,
@error will be set to %G_IO_ERROR_CANCELLED.
a #GList of #GInetAddress, or %NULL on error. See g_resolver_lookup_by_name() for more details.
a #GResolver
the result passed to your #GAsyncReadyCallback
Synchronously performs a DNS record lookup for the given @rrname and returns
a list of records as #GVariant tuples. See #GResolverRecordType for
information on what the records contain for each @record_type.
If the DNS resolution fails, @error (if non-%NULL) will be set to
a value from #GResolverError.
If @cancellable is non-%NULL, it can be used to cancel the
operation, in which case @error (if non-%NULL) will be set to
%G_IO_ERROR_CANCELLED.
a #GList of #GVariant, or %NULL on error. You must free each of the records and the list when you are done with it. (You can use g_list_free_full() with g_variant_unref() to do this.)
a #GResolver
the DNS name to lookup the record for
the type of DNS record to lookup
a #GCancellable, or %NULL
Begins asynchronously performing a DNS lookup for the given
@rrname, and eventually calls @callback, which must call
g_resolver_lookup_records_finish() to get the final result. See
g_resolver_lookup_records() for more details.
a #GResolver
the DNS name to lookup the record for
the type of DNS record to lookup
a #GCancellable, or %NULL
callback to call after resolution completes
data for @callback
Retrieves the result of a previous call to
g_resolver_lookup_records_async(). Returns a list of records as #GVariant
tuples. See #GResolverRecordType for information on what the records contain.
If the DNS resolution failed, @error (if non-%NULL) will be set to
a value from #GResolverError. If the operation was cancelled,
@error will be set to %G_IO_ERROR_CANCELLED.
a #GList of #GVariant, or %NULL on error. You must free each of the records and the list when you are done with it. (You can use g_list_free_full() with g_variant_unref() to do this.)
a #GResolver
the result passed to your #GAsyncReadyCallback
Synchronously performs a DNS SRV lookup for the given @service and
@protocol in the given @domain and returns an array of #GSrvTarget.
@domain may be an ASCII-only or UTF-8 hostname. Note also that the
@service and @protocol arguments <emphasis>do not</emphasis>
include the leading underscore that appears in the actual DNS
entry.
On success, g_resolver_lookup_service() will return a #GList of
#GSrvTarget, sorted in order of preference. (That is, you should
attempt to connect to the first target first, then the second if
the first fails, etc.)
If the DNS resolution fails, @error (if non-%NULL) will be set to
a value from #GResolverError.
If @cancellable is non-%NULL, it can be used to cancel the
operation, in which case @error (if non-%NULL) will be set to
%G_IO_ERROR_CANCELLED.
If you are planning to connect to the service, it is usually easier
to create a #GNetworkService and use its #GSocketConnectable
interface.
a #GList of #GSrvTarget, or %NULL on error. You must free each of the targets and the list when you are done with it. (You can use g_resolver_free_targets() to do this.)
a #GResolver
the service type to look up (eg, "ldap")
the networking protocol to use for @service (eg, "tcp")
the DNS domain to look up the service in
a #GCancellable, or %NULL
Begins asynchronously performing a DNS SRV lookup for the given
@service and @protocol in the given @domain, and eventually calls
@callback, which must call g_resolver_lookup_service_finish() to
get the final result. See g_resolver_lookup_service() for more
details.
a #GResolver
the service type to look up (eg, "ldap")
the networking protocol to use for @service (eg, "tcp")
the DNS domain to look up the service in
a #GCancellable, or %NULL
callback to call after resolution completes
data for @callback
Retrieves the result of a previous call to
g_resolver_lookup_service_async().
If the DNS resolution failed, @error (if non-%NULL) will be set to
a value from #GResolverError. If the operation was cancelled,
@error will be set to %G_IO_ERROR_CANCELLED.
a #GList of #GSrvTarget, or %NULL on error. See g_resolver_lookup_service() for more details.
a #GResolver
the result passed to your #GAsyncReadyCallback
Sets @resolver to be the application's default resolver (reffing
@resolver, and unreffing the previous default resolver, if any).
Future calls to g_resolver_get_default() will return this resolver.
This can be used if an application wants to perform any sort of DNS
caching or "pinning"; it can implement its own #GResolver that
calls the original default resolver for DNS operations, and
implements its own cache policies on top of that, and then set
itself as the default resolver for all later code to use.
the new default #GResolver
Emitted when the resolver notices that the system resolver
configuration has changed.
a #GList of #GInetAddress, or %NULL on error. You must unref each of the addresses and free the list when you are done with it. (You can use g_resolver_free_addresses() to do this.)
the hostname to look up
a #GCancellable, or %NULL
the hostname to look up the address of
a #GCancellable, or %NULL
callback to call after resolution completes
data for @callback
a #GList of #GInetAddress, or %NULL on error. See g_resolver_lookup_by_name() for more details.
the result passed to your #GAsyncReadyCallback
a hostname (either ASCII-only, or in ASCII-encoded form), or %NULL on error.
the address to reverse-resolve
a #GCancellable, or %NULL
the address to reverse-resolve
a #GCancellable, or %NULL
callback to call after resolution completes
data for @callback
a hostname (either ASCII-only, or in ASCII-encoded form), or %NULL on error.
the result passed to your #GAsyncReadyCallback
a #GList of #GSrvTarget, or %NULL on error. See g_resolver_lookup_service() for more details.
the result passed to your #GAsyncReadyCallback
a #GList of #GVariant, or %NULL on error. You must free each of the records and the list when you are done with it. (You can use g_list_free_full() with g_variant_unref() to do this.)
the DNS name to lookup the record for
the type of DNS record to lookup
a #GCancellable, or %NULL
the DNS name to lookup the record for
the type of DNS record to lookup
a #GCancellable, or %NULL
callback to call after resolution completes
data for @callback
a #GList of #GVariant, or %NULL on error. You must free each of the records and the list when you are done with it. (You can use g_list_free_full() with g_variant_unref() to do this.)
the result passed to your #GAsyncReadyCallback
An error code used with %G_RESOLVER_ERROR in a #GError returned
from a #GResolver routine.
the requested name/address/service was not found
the requested information could not be looked up due to a network error or similar problem
unknown error
Gets the #GResolver Error Quark.
a #GQuark.
The type of record that g_resolver_lookup_records() or
g_resolver_lookup_records_async() should retrieve. The records are returned
as lists of #GVariant tuples. Each record type has different values in
the variant tuples returned.
%G_RESOLVER_RECORD_SRV records are returned as variants with the signature
'(qqqs)', containing a guint16 with the priority, a guint16 with the
weight, a guint16 with the port, and a string of the hostname.
%G_RESOLVER_RECORD_MX records are returned as variants with the signature
'(qs)', representing a guint16 with the preference, and a string containing
the mail exchanger hostname.
%G_RESOLVER_RECORD_TXT records are returned as variants with the signature
'(as)', representing an array of the strings in the text record.
%G_RESOLVER_RECORD_SOA records are returned as variants with the signature
'(ssuuuuu)', representing a string containing the primary name server, a
string containing the administrator, the serial as a guint32, the refresh
interval as guint32, the retry interval as a guint32, the expire timeout
as a guint32, and the ttl as a guint32.
%G_RESOLVER_RECORD_NS records are returned as variants with the signature
'(s)', representing a string of the hostname of the name server.
lookup DNS SRV records for a domain
lookup DNS MX records for a domain
lookup DNS TXT records for a name
lookup DNS SOA records for a zone
lookup DNS NS records for a domain
Applications and libraries often contain binary or textual data that is really part of the
application, rather than user data. For instance #GtkBuilder .ui files, splashscreen images,
GMenu markup xml, CSS files, icons, etc. These are often shipped as files in <filename>$datadir/appname</filename>, or
manually included as literal strings in the code.
The #GResource API and the <link linkend="glib-compile-resources">glib-compile-resources</link> program
provide a convenient and efficient alternative to this which has some nice properties. You
maintain the files as normal files, so its easy to edit them, but during the build the files
are combined into a binary bundle that is linked into the executable. This means that loading
the resource files are efficient (as they are already in memory, shared with other instances) and
simple (no need to check for things like I/O errors or locate the files in the filesystem). It
also makes it easier to create relocatable applications.
Resource files can also be marked as compressed. Such files will be included in the resource bundle
in a compressed form, but will be automatically uncompressed when the resource is used. This
is very useful e.g. for larger text files that are parsed once (or rarely) and then thrown away.
Resource files can also be marked to be preprocessed, by setting the value of the
<literal>preprocess</literal> attribute to a comma-separated list of preprocessing options.
The only options currently supported are:
<literal>xml-stripblanks</literal> which will use <command>xmllint</command> to strip
ignorable whitespace from the xml file. For this to work, the <envar>XMLLINT</envar>
environment variable must be set to the full path to the xmllint executable, or xmllint
must be in the PATH; otherwise the preprocessing step is skipped.
<literal>to-pixdata</literal> which will use <command>gdk-pixbuf-pixdata</command> to convert
images to the GdkPixdata format, which allows you to create pixbufs directly using the data inside
the resource file, rather than an (uncompressed) copy if it. For this, the gdk-pixbuf-pixdata
program must be in the PATH, or the <envar>GDK_PIXBUF_PIXDATA</envar> environment variable must be
set to the full path to the gdk-pixbuf-pixdata executable; otherwise the resource compiler will
abort.
Resource bundles are created by the <link linkend="glib-compile-resources">glib-compile-resources</link> program
which takes an xml file that describes the bundle, and a set of files that the xml references. These
are combined into a binary resource bundle.
<example id="resource-example"><title>Example resource description</title>
<programlisting><![CDATA[
<?xml version="1.0" encoding="UTF-8"?>
<gresources>
<gresource prefix="/org/gtk/Example">
<file>data/splashscreen.png</file>
<file compressed="true">dialog.ui</file>
<file preprocess="xml-stripblanks">menumarkup.xml</file>
</gresource>
</gresources>
]]></programlisting></example>
This will create a resource bundle with the following files:
<programlisting><![CDATA[
/org/gtk/Example/data/splashscreen.png
/org/gtk/Example/dialog.ui
/org/gtk/Example/menumarkup.xml
]]></programlisting>
Note that all resources in the process share the same namespace, so use java-style
path prefixes (like in the above example) to avoid conflicts.
You can then use <link linkend="glib-compile-resources">glib-compile-resources</link> to compile the xml to a
binary bundle that you can load with g_resource_load(). However, its more common to use the --generate-source and
--generate-header arguments to create a source file and header to link directly into your application.
Once a #GResource has been created and registered all the data in it can be accessed globally in the process by
using API calls like g_resources_open_stream() to stream the data or g_resources_lookup_data() to get a direct pointer
to the data. You can also use uris like "resource:///org/gtk/Example/data/splashscreen.png" with #GFile to access
the resource data.
There are two forms of the generated source, the default version uses the compiler support for constructor
and destructor functions (where available) to automatically create and register the #GResource on startup
or library load time. If you pass --manual-register two functions to register/unregister the resource is instead
created. This requires an explicit initialization call in your application/library, but it works on all platforms,
even on the minor ones where this is not available. (Constructor support is available for at least Win32, MacOS and Linux.)
Note that resource data can point directly into the data segment of e.g. a library, so if you are unloading libraries
during runtime you need to be very careful with keeping around pointers to data from a resource, as this goes away
when the library is unloaded. However, in practice this is not generally a problem, since most resource accesses
is for your own resources, and resource data is often used once, during parsing, and then released.
Creates a GResource from a reference to the binary resource bundle.
This will keep a reference to @data while the resource lives, so
the data should not be modified or freed.
If you want to use this resource in the global resource namespace you need
to register it with g_resources_register().
a new #GResource, or %NULL on error
A #GBytes
Registers the resource with the process-global set of resources.
Once a resource is registered the files in it can be accessed
with the global resource lookup functions like g_resources_lookup_data().
A #GResource
Unregisters the resource from the process-global set of resources.
A #GResource
Returns all the names of children at the specified @path in the resource.
The return result is a %NULL terminated list of strings which should
be released with g_strfreev().
@lookup_flags controls the behaviour of the lookup.
an array of constant strings
A #GResource
A pathname inside the resource
A #GResourceLookupFlags
Looks for a file at the specified @path in the resource and
if found returns information about it.
@lookup_flags controls the behaviour of the lookup.
%TRUE if the file was found. %FALSE if there were errors
A #GResource
A pathname inside the resource
A #GResourceLookupFlags
a location to place the length of the contents of the file, or %NULL if the length is not needed
a location to place the flags about the file, or %NULL if the length is not needed
Looks for a file at the specified @path in the resource and
returns a #GBytes that lets you directly access the data in
memory.
The data is always followed by a zero byte, so you
can safely use the data as a C string. However, that byte
is not included in the size of the GBytes.
For uncompressed resource files this is a pointer directly into
the resource bundle, which is typically in some readonly data section
in the program binary. For compressed files we allocate memory on
the heap and automatically uncompress the data.
@lookup_flags controls the behaviour of the lookup.
#GBytes or %NULL on error. Free the returned object with g_bytes_unref()
A #GResource
A pathname inside the resource
A #GResourceLookupFlags
Looks for a file at the specified @path in the resource and
returns a #GInputStream that lets you read the data.
@lookup_flags controls the behaviour of the lookup.
#GInputStream or %NULL on error. Free the returned object with g_object_unref()
A #GResource
A pathname inside the resource
A #GResourceLookupFlags
Atomically increments the reference count of @array by one. This
function is MT-safe and may be called from any thread.
The passed in #GResource
A #GResource
Atomically decrements the reference count of @resource by one. If the
reference count drops to 0, all memory allocated by the array is
released. This function is MT-safe and may be called from any
thread.
A #GResource
Loads a binary resource bundle and creates a #GResource representation of it, allowing
you to query it for data.
If you want to use this resource in the global resource namespace you need
to register it with g_resources_register().
a new #GResource, or %NULL on error
the path of a filename to load, in the GLib filename encoding
An error code used with %G_RESOURCE_ERROR in a #GError returned
from a #GResource routine.
no file was found at the requested path
unknown error
Gets the #GResource Error Quark.
a #GQuark
GResourceFlags give information about a particular file inside a resource
bundle.
No flags set.
The file is compressed.
GResourceLookupFlags determine how resource path lookups are handled.
No flags set.
#GSeekable is implemented by streams (implementations of
#GInputStream or #GOutputStream) that support seeking.
Tests if the stream supports the #GSeekableIface.
%TRUE if @seekable can be seeked. %FALSE otherwise.
Tests if the stream can be truncated.
%TRUE if the stream can be truncated, %FALSE otherwise.
Seeks in the stream by the given @offset, modified by @type.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
%TRUE if successful. If an error has occurred, this function will return %FALSE and set @error appropriately if present.
a #goffset.
a #GSeekType.
optional #GCancellable object, %NULL to ignore.
Tells the current position within the stream.
the offset from the beginning of the buffer.
Truncates a stream with a given #offset.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned. If an
operation was partially finished when the operation was cancelled the
partial result will be returned, without an error.
%TRUE if successful. If an error has occurred, this function will return %FALSE and set @error appropriately if present.
a #goffset.
optional #GCancellable object, %NULL to ignore.
Tests if the stream supports the #GSeekableIface.
%TRUE if @seekable can be seeked. %FALSE otherwise.
a #GSeekable.
Tests if the stream can be truncated.
%TRUE if the stream can be truncated, %FALSE otherwise.
a #GSeekable.
Seeks in the stream by the given @offset, modified by @type.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
%TRUE if successful. If an error has occurred, this function will return %FALSE and set @error appropriately if present.
a #GSeekable.
a #goffset.
a #GSeekType.
optional #GCancellable object, %NULL to ignore.
Tells the current position within the stream.
the offset from the beginning of the buffer.
a #GSeekable.
Truncates a stream with a given #offset.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned. If an
operation was partially finished when the operation was cancelled the
partial result will be returned, without an error.
%TRUE if successful. If an error has occurred, this function will return %FALSE and set @error appropriately if present.
a #GSeekable.
a #goffset.
optional #GCancellable object, %NULL to ignore.
Provides an interface for implementing seekable functionality on I/O Streams.
the offset from the beginning of the buffer.
%TRUE if @seekable can be seeked. %FALSE otherwise.
%TRUE if successful. If an error has occurred, this function will return %FALSE and set @error appropriately if present.
a #goffset.
a #GSeekType.
optional #GCancellable object, %NULL to ignore.
%TRUE if the stream can be truncated, %FALSE otherwise.
%TRUE if successful. If an error has occurred, this function will return %FALSE and set @error appropriately if present.
a #goffset.
optional #GCancellable object, %NULL to ignore.
The #GSettings class provides a convenient API for storing and retrieving
application settings.
Reads and writes can be considered to be non-blocking. Reading
settings with #GSettings is typically extremely fast: on
approximately the same order of magnitude (but slower than) a
#GHashTable lookup. Writing settings is also extremely fast in terms
of time to return to your application, but can be extremely expensive
for other threads and other processes. Many settings backends
(including dconf) have lazy initialisation which means in the common
case of the user using their computer without modifying any settings
a lot of work can be avoided. For dconf, the D-Bus service doesn't
even need to be started in this case. For this reason, you should
only ever modify #GSettings keys in response to explicit user action.
Particular care should be paid to ensure that modifications are not
made during startup -- for example, when setting the initial value
of preferences widgets. The built-in g_settings_bind() functionality
is careful not to write settings in response to notify signals as a
result of modifications that it makes to widgets.
When creating a GSettings instance, you have to specify a schema
that describes the keys in your settings and their types and default
values, as well as some other information.
Normally, a schema has as fixed path that determines where the settings
are stored in the conceptual global tree of settings. However, schemas
can also be 'relocatable', i.e. not equipped with a fixed path. This is
useful e.g. when the schema describes an 'account', and you want to be
able to store a arbitrary number of accounts.
Paths must start with and end with a forward slash character ('/')
and must not contain two sequential slash characters. Paths should
be chosen based on a domain name associated with the program or
library to which the settings belong. Examples of paths are
"/org/gtk/settings/file-chooser/" and "/ca/desrt/dconf-editor/".
Paths should not start with "/apps/", "/desktop/" or "/system/" as
they often did in GConf.
Unlike other configuration systems (like GConf), GSettings does not
restrict keys to basic types like strings and numbers. GSettings stores
values as #GVariant, and allows any #GVariantType for keys. Key names
are restricted to lowercase characters, numbers and '-'. Furthermore,
the names must begin with a lowercase character, must not end
with a '-', and must not contain consecutive dashes.
Similar to GConf, the default values in GSettings schemas can be
localized, but the localized values are stored in gettext catalogs
and looked up with the domain that is specified in the
<tag class="attribute">gettext-domain</tag> attribute of the
<tag class="starttag">schemalist</tag> or <tag class="starttag">schema</tag>
elements and the category that is specified in the l10n attribute of the
<tag class="starttag">key</tag> element.
GSettings uses schemas in a compact binary form that is created
by the <link linkend="glib-compile-schemas">glib-compile-schemas</link>
utility. The input is a schema description in an XML format that can be
described by the following DTD:
|[<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" parse="text" href="../../../../gio/gschema.dtd"><xi:fallback>FIXME: MISSING XINCLUDE CONTENT</xi:fallback></xi:include>]|
glib-compile-schemas expects schema files to have the extension <filename>.gschema.xml</filename>
At runtime, schemas are identified by their id (as specified
in the <tag class="attribute">id</tag> attribute of the
<tag class="starttag">schema</tag> element). The
convention for schema ids is to use a dotted name, similar in
style to a D-Bus bus name, e.g. "org.gnome.SessionManager". In particular,
if the settings are for a specific service that owns a D-Bus bus name,
the D-Bus bus name and schema id should match. For schemas which deal
with settings not associated with one named application, the id should
not use StudlyCaps, e.g. "org.gnome.font-rendering".
In addition to #GVariant types, keys can have types that have enumerated
types. These can be described by a <tag class="starttag">choice</tag>,
<tag class="starttag">enum</tag> or <tag class="starttag">flags</tag> element, see
<xref linkend="schema-enumerated"/>. The underlying type of
such a key is string, but you can use g_settings_get_enum(),
g_settings_set_enum(), g_settings_get_flags(), g_settings_set_flags()
access the numeric values corresponding to the string value of enum
and flags keys.
<example id="schema-default-values"><title>Default values</title>
<programlisting><![CDATA[
<schemalist>
<schema id="org.gtk.Test" path="/org/gtk/Test/" gettext-domain="test">
<key name="greeting" type="s">
<default l10n="messages">"Hello, earthlings"</default>
<summary>A greeting</summary>
<description>
Greeting of the invading martians
</description>
</key>
<key name="box" type="(ii)">
<default>(20,30)</default>
</key>
</schema>
</schemalist>
]]></programlisting></example>
<example id="schema-enumerated"><title>Ranges, choices and enumerated types</title>
<programlisting><![CDATA[
<schemalist>
<enum id="org.gtk.Test.myenum">
<value nick="first" value="1"/>
<value nick="second" value="2"/>
</enum>
<flags id="org.gtk.Test.myflags">
<value nick="flag1" value="1"/>
<value nick="flag2" value="2"/>
<value nick="flag3" value="4"/>
</flags>
<schema id="org.gtk.Test">
<key name="key-with-range" type="i">
<range min="1" max="100"/>
<default>10</default>
</key>
<key name="key-with-choices" type="s">
<choices>
<choice value='Elisabeth'/>
<choice value='Annabeth'/>
<choice value='Joe'/>
</choices>
<aliases>
<alias value='Anna' target='Annabeth'/>
<alias value='Beth' target='Elisabeth'/>
</aliases>
<default>'Joe'</default>
</key>
<key name='enumerated-key' enum='org.gtk.Test.myenum'>
<default>'first'</default>
</key>
<key name='flags-key' flags='org.gtk.Test.myflags'>
<default>["flag1",flag2"]</default>
</key>
</schema>
</schemalist>
]]></programlisting></example>
<refsect2>
<title>Vendor overrides</title>
<para>
Default values are defined in the schemas that get installed by
an application. Sometimes, it is necessary for a vendor or distributor
to adjust these defaults. Since patching the XML source for the schema
is inconvenient and error-prone,
<link linkend="glib-compile-schemas">glib-compile-schemas</link> reads
so-called 'vendor override' files. These are keyfiles in the same
directory as the XML schema sources which can override default values.
The schema id serves as the group name in the key file, and the values
are expected in serialized GVariant form, as in the following example:
<informalexample><programlisting>
[org.gtk.Example]
key1='string'
key2=1.5
</programlisting></informalexample>
</para>
<para>
glib-compile-schemas expects schema files to have the extension
<filename>.gschema.override</filename>
</para>
</refsect2>
<refsect2>
<title>Binding</title>
<para>
A very convenient feature of GSettings lets you bind #GObject properties
directly to settings, using g_settings_bind(). Once a GObject property
has been bound to a setting, changes on either side are automatically
propagated to the other side. GSettings handles details like
mapping between GObject and GVariant types, and preventing infinite
cycles.
</para>
<para>
This makes it very easy to hook up a preferences dialog to the
underlying settings. To make this even more convenient, GSettings
looks for a boolean property with the name "sensitivity" and
automatically binds it to the writability of the bound setting.
If this 'magic' gets in the way, it can be suppressed with the
#G_SETTINGS_BIND_NO_SENSITIVITY flag.
</para>
</refsect2>
Creates a new #GSettings object with the schema specified by
@schema_id.
Signals on the newly created #GSettings object will be dispatched
via the thread-default #GMainContext in effect at the time of the
call to g_settings_new(). The new #GSettings will hold a reference
on the context. See g_main_context_push_thread_default().
a new #GSettings object
the id of the schema
Creates a new #GSettings object with a given schema, backend and
path.
It should be extremely rare that you ever want to use this function.
It is made available for advanced use-cases (such as plugin systems
that want to provide access to schemas loaded from custom locations,
etc).
At the most basic level, a #GSettings object is a pure composition of
4 things: a #GSettingsSchema, a #GSettingsBackend, a path within that
backend, and a #GMainContext to which signals are dispatched.
This constructor therefore gives you full control over constructing
#GSettings instances. The first 4 parameters are given directly as
@schema, @backend and @path, and the main context is taken from the
thread-default (as per g_settings_new()).
If @backend is %NULL then the default backend is used.
If @path is %NULL then the path from the schema is used. It is an
error f @path is %NULL and the schema has no path of its own or if
@path is non-%NULL and not equal to the path that the schema does
have.
a new #GSettings object
a #GSettingsSchema
a #GSettingsBackend
the path to use
Creates a new #GSettings object with the schema specified by
@schema_id and a given #GSettingsBackend.
Creating a #GSettings object with a different backend allows accessing
settings from a database other than the usual one. For example, it may make
sense to pass a backend corresponding to the "defaults" settings database on
the system to get a settings object that modifies the system default
settings instead of the settings for this user.
a new #GSettings object
the id of the schema
the #GSettingsBackend to use
Creates a new #GSettings object with the schema specified by
@schema_id and a given #GSettingsBackend and path.
This is a mix of g_settings_new_with_backend() and
g_settings_new_with_path().
a new #GSettings object
the id of the schema
the #GSettingsBackend to use
the path to use
Creates a new #GSettings object with the relocatable schema specified
by @schema_id and a given path.
You only need to do this if you want to directly create a settings
object with a schema that doesn't have a specified path of its own.
That's quite rare.
It is a programmer error to call this function for a schema that
has an explicitly specified path.
a new #GSettings object
the id of the schema
the path to use
Gets a list of the relocatable #GSettings schemas installed on the
system. These are schemas that do not provide their own path. It is
usual to instantiate these schemas directly, but if you want to you
can use g_settings_new_with_path() to specify the path.
The output of this function, taken together with the output of
g_settings_list_schemas() represents the complete list of all
installed schemas.
a list of relocatable #GSettings schemas that are available. The list must not be modified or freed.
Gets a list of the #GSettings schemas installed on the system. The
returned list is exactly the list of schemas for which you may call
g_settings_new() without adverse effects.
This function does not list the schemas that do not provide their own
paths (ie: schemas for which you must use
g_settings_new_with_path()). See
g_settings_list_relocatable_schemas() for that.
a list of #GSettings schemas that are available. The list must not be modified or freed.
Ensures that all pending operations for the given are complete for
the default backend.
Writes made to a #GSettings are handled asynchronously. For this
reason, it is very unlikely that the changes have it to disk by the
time g_settings_set() returns.
This call will block until all of the writes have made it to the
backend. Since the mainloop is not running, no change notifications
will be dispatched during this call (but some may be queued by the
time the call is done).
Removes an existing binding for @property on @object.
Note that bindings are automatically removed when the
object is finalized, so it is rarely necessary to call this
function.
the object
the property whose binding is removed
Applies any changes that have been made to the settings. This
function does nothing unless @settings is in 'delay-apply' mode;
see g_settings_delay(). In the normal case settings are always
applied immediately.
a #GSettings instance
Create a binding between the @key in the @settings object
and the property @property of @object.
The binding uses the default GIO mapping functions to map
between the settings and property values. These functions
handle booleans, numeric types and string types in a
straightforward way. Use g_settings_bind_with_mapping() if
you need a custom mapping, or map between types that are not
supported by the default mapping functions.
Unless the @flags include %G_SETTINGS_BIND_NO_SENSITIVITY, this
function also establishes a binding between the writability of
@key and the "sensitive" property of @object (if @object has
a boolean property by that name). See g_settings_bind_writable()
for more details about writable bindings.
Note that the lifecycle of the binding is tied to the object,
and that you can have only one binding per object property.
If you bind the same property twice on the same object, the second
binding overrides the first one.
a #GSettings object
the key to bind
a #GObject
the name of the property to bind
flags for the binding
Create a binding between the @key in the @settings object
and the property @property of @object.
The binding uses the provided mapping functions to map between
settings and property values.
Note that the lifecycle of the binding is tied to the object,
and that you can have only one binding per object property.
If you bind the same property twice on the same object, the second
binding overrides the first one.
a #GSettings object
the key to bind
a #GObject
the name of the property to bind
flags for the binding
a function that gets called to convert values from @settings to @object, or %NULL to use the default GIO mapping
a function that gets called to convert values from @object to @settings, or %NULL to use the default GIO mapping
data that gets passed to @get_mapping and @set_mapping
#GDestroyNotify function for @user_data
Create a binding between the writability of @key in the
@settings object and the property @property of @object.
The property must be boolean; "sensitive" or "visible"
properties of widgets are the most likely candidates.
Writable bindings are always uni-directional; changes of the
writability of the setting will be propagated to the object
property, not the other way.
When the @inverted argument is %TRUE, the binding inverts the
value as it passes from the setting to the object, i.e. @property
will be set to %TRUE if the key is <emphasis>not</emphasis>
writable.
Note that the lifecycle of the binding is tied to the object,
and that you can have only one binding per object property.
If you bind the same property twice on the same object, the second
binding overrides the first one.
a #GSettings object
the key to bind
a #GObject
the name of a boolean property to bind
whether to 'invert' the value
Creates a #GAction corresponding to a given #GSettings key.
The action has the same name as the key.
The value of the key becomes the state of the action and the action
is enabled when the key is writable. Changing the state of the
action results in the key being written to. Changes to the value or
writability of the key cause appropriate change notifications to be
emitted for the action.
For boolean-valued keys, action activations take no parameter and
result in the toggling of the value. For all other types,
activations take the new value for the key (which must have the
correct type).
a new #GAction
a #GSettings
the name of a key in @settings
Changes the #GSettings object into 'delay-apply' mode. In this
mode, changes to @settings are not immediately propagated to the
backend, but kept locally until g_settings_apply() is called.
a #GSettings object
Gets the value that is stored at @key in @settings.
A convenience function that combines g_settings_get_value() with
g_variant_get().
It is a programmer error to give a @key that isn't contained in the
schema for @settings or for the #GVariantType of @format to mismatch
the type given in the schema.
a #GSettings object
the key to get the value for
a #GVariant format string
Gets the value that is stored at @key in @settings.
A convenience variant of g_settings_get() for booleans.
It is a programmer error to give a @key that isn't specified as
having a boolean type in the schema for @settings.
a boolean
a #GSettings object
the key to get the value for
Creates a 'child' settings object which has a base path of
<replaceable>base-path</replaceable>/@name, where
<replaceable>base-path</replaceable> is the base path of @settings.
The schema for the child settings object must have been declared
in the schema of @settings using a <tag class="starttag">child</tag> element.
a 'child' settings object
a #GSettings object
the name of the 'child' schema
Gets the value that is stored at @key in @settings.
A convenience variant of g_settings_get() for doubles.
It is a programmer error to give a @key that isn't specified as
having a 'double' type in the schema for @settings.
a double
a #GSettings object
the key to get the value for
Gets the value that is stored in @settings for @key and converts it
to the enum value that it represents.
In order to use this function the type of the value must be a string
and it must be marked in the schema file as an enumerated type.
It is a programmer error to give a @key that isn't contained in the
schema for @settings or is not marked as an enumerated type.
If the value stored in the configuration database is not a valid
value for the enumerated type then this function will return the
default value.
the enum value
a #GSettings object
the key to get the value for
Gets the value that is stored in @settings for @key and converts it
to the flags value that it represents.
In order to use this function the type of the value must be an array
of strings and it must be marked in the schema file as an flags type.
It is a programmer error to give a @key that isn't contained in the
schema for @settings or is not marked as a flags type.
If the value stored in the configuration database is not a valid
value for the flags type then this function will return the default
value.
the flags value
a #GSettings object
the key to get the value for
Returns whether the #GSettings object has any unapplied
changes. This can only be the case if it is in 'delayed-apply' mode.
%TRUE if @settings has unapplied changes
a #GSettings object
Gets the value that is stored at @key in @settings.
A convenience variant of g_settings_get() for 32-bit integers.
It is a programmer error to give a @key that isn't specified as
having a int32 type in the schema for @settings.
an integer
a #GSettings object
the key to get the value for
Gets the value that is stored at @key in @settings, subject to
application-level validation/mapping.
You should use this function when the application needs to perform
some processing on the value of the key (for example, parsing). The
@mapping function performs that processing. If the function
indicates that the processing was unsuccessful (due to a parse error,
for example) then the mapping is tried again with another value.
This allows a robust 'fall back to defaults' behaviour to be
implemented somewhat automatically.
The first value that is tried is the user's setting for the key. If
the mapping function fails to map this value, other values may be
tried in an unspecified order (system or site defaults, translated
schema default values, untranslated schema default values, etc).
If the mapping function fails for all possible values, one additional
attempt is made: the mapping function is called with a %NULL value.
If the mapping function still indicates failure at this point then
the application will be aborted.
The result parameter for the @mapping function is pointed to a
#gpointer which is initially set to %NULL. The same pointer is given
to each invocation of @mapping. The final value of that #gpointer is
what is returned by this function. %NULL is valid; it is returned
just as any other value would be.
the result, which may be %NULL
a #GSettings object
the key to get the value for
the function to map the value in the settings database to the value used by the application
user data for @mapping
Queries the range of a key.
This function will return a #GVariant that fully describes the range
of values that are valid for @key.
The type of #GVariant returned is <literal>(sv)</literal>. The
string describes the type of range restriction in effect. The type
and meaning of the value contained in the variant depends on the
string.
If the string is <literal>'type'</literal> then the variant contains
an empty array. The element type of that empty array is the expected
type of value and all values of that type are valid.
If the string is <literal>'enum'</literal> then the variant contains
an array enumerating the possible values. Each item in the array is
a possible valid value and no other values are valid.
If the string is <literal>'flags'</literal> then the variant contains
an array. Each item in the array is a value that may appear zero or
one times in an array to be used as the value for this key. For
example, if the variant contained the array <literal>['x',
'y']</literal> then the valid values for the key would be
<literal>[]</literal>, <literal>['x']</literal>,
<literal>['y']</literal>, <literal>['x', 'y']</literal> and
<literal>['y', 'x']</literal>.
Finally, if the string is <literal>'range'</literal> then the variant
contains a pair of like-typed values -- the minimum and maximum
permissible values for this key.
This information should not be used by normal programs. It is
considered to be a hint for introspection purposes. Normal programs
should already know what is permitted by their own schema. The
format may change in any way in the future -- but particularly, new
forms may be added to the possibilities described above.
It is a programmer error to give a @key that isn't contained in the
schema for @settings.
You should free the returned value with g_variant_unref() when it is
no longer needed.
a #GVariant describing the range
a #GSettings
the key to query the range of
Gets the value that is stored at @key in @settings.
A convenience variant of g_settings_get() for strings.
It is a programmer error to give a @key that isn't specified as
having a string type in the schema for @settings.
a newly-allocated string
a #GSettings object
the key to get the value for
A convenience variant of g_settings_get() for string arrays.
It is a programmer error to give a @key that isn't specified as
having an array of strings type in the schema for @settings.
a newly-allocated, %NULL-terminated array of strings, the value that is stored at @key in @settings.
a #GSettings object
the key to get the value for
Gets the value that is stored at @key in @settings.
A convenience variant of g_settings_get() for 32-bit unsigned
integers.
It is a programmer error to give a @key that isn't specified as
having a uint32 type in the schema for @settings.
an unsigned integer
a #GSettings object
the key to get the value for
Gets the value that is stored in @settings for @key.
It is a programmer error to give a @key that isn't contained in the
schema for @settings.
a new #GVariant
a #GSettings object
the key to get the value for
Finds out if a key can be written or not
%TRUE if the key @name is writable
a #GSettings object
the name of a key
Gets the list of children on @settings.
The list is exactly the list of strings for which it is not an error
to call g_settings_get_child().
For GSettings objects that are lists, this value can change at any
time and you should connect to the "children-changed" signal to watch
for those changes. Note that there is a race condition here: you may
request a child after listing it only for it to have been destroyed
in the meantime. For this reason, g_settings_get_child() may return
%NULL even for a child that was listed by this function.
For GSettings objects that are not lists, you should probably not be
calling this function from "normal" code (since you should already
know what children are in your schema). This function may still be
useful there for introspection reasons, however.
You should free the return value with g_strfreev() when you are done
with it.
a list of the children on @settings
a #GSettings object
Introspects the list of keys on @settings.
You should probably not be calling this function from "normal" code
(since you should already know what keys are in your schema). This
function is intended for introspection reasons.
You should free the return value with g_strfreev() when you are done
with it.
a list of the keys on @settings
a #GSettings object
Checks if the given @value is of the correct type and within the
permitted range for @key.
This API is not intended to be used by normal programs -- they should
already know what is permitted by their own schemas. This API is
meant to be used by programs such as editors or commandline tools.
It is a programmer error to give a @key that isn't contained in the
schema for @settings.
%TRUE if @value is valid for @key
a #GSettings
the key to check
the value to check
Resets @key to its default value.
This call resets the key, as much as possible, to its default value.
That might the value specified in the schema or the one set by the
administrator.
a #GSettings object
the name of a key
Reverts all non-applied changes to the settings. This function
does nothing unless @settings is in 'delay-apply' mode; see
g_settings_delay(). In the normal case settings are always applied
immediately.
Change notifications will be emitted for affected keys.
a #GSettings instance
Sets @key in @settings to @value.
A convenience function that combines g_settings_set_value() with
g_variant_new().
It is a programmer error to give a @key that isn't contained in the
schema for @settings or for the #GVariantType of @format to mismatch
the type given in the schema.
%TRUE if setting the key succeeded, %FALSE if the key was not writable
a #GSettings object
the name of the key to set
a #GVariant format string
Sets @key in @settings to @value.
A convenience variant of g_settings_set() for booleans.
It is a programmer error to give a @key that isn't specified as
having a boolean type in the schema for @settings.
%TRUE if setting the key succeeded, %FALSE if the key was not writable
a #GSettings object
the name of the key to set
the value to set it to
Sets @key in @settings to @value.
A convenience variant of g_settings_set() for doubles.
It is a programmer error to give a @key that isn't specified as
having a 'double' type in the schema for @settings.
%TRUE if setting the key succeeded, %FALSE if the key was not writable
a #GSettings object
the name of the key to set
the value to set it to
Looks up the enumerated type nick for @value and writes it to @key,
within @settings.
It is a programmer error to give a @key that isn't contained in the
schema for @settings or is not marked as an enumerated type, or for
@value not to be a valid value for the named type.
After performing the write, accessing @key directly with
g_settings_get_string() will return the 'nick' associated with
@value.
%TRUE, if the set succeeds
a #GSettings object
a key, within @settings
an enumerated value
Looks up the flags type nicks for the bits specified by @value, puts
them in an array of strings and writes the array to @key, within
@settings.
It is a programmer error to give a @key that isn't contained in the
schema for @settings or is not marked as a flags type, or for @value
to contain any bits that are not value for the named type.
After performing the write, accessing @key directly with
g_settings_get_strv() will return an array of 'nicks'; one for each
bit in @value.
%TRUE, if the set succeeds
a #GSettings object
a key, within @settings
a flags value
Sets @key in @settings to @value.
A convenience variant of g_settings_set() for 32-bit integers.
It is a programmer error to give a @key that isn't specified as
having a int32 type in the schema for @settings.
%TRUE if setting the key succeeded, %FALSE if the key was not writable
a #GSettings object
the name of the key to set
the value to set it to
Sets @key in @settings to @value.
A convenience variant of g_settings_set() for strings.
It is a programmer error to give a @key that isn't specified as
having a string type in the schema for @settings.
%TRUE if setting the key succeeded, %FALSE if the key was not writable
a #GSettings object
the name of the key to set
the value to set it to
Sets @key in @settings to @value.
A convenience variant of g_settings_set() for string arrays. If
@value is %NULL, then @key is set to be the empty array.
It is a programmer error to give a @key that isn't specified as
having an array of strings type in the schema for @settings.
%TRUE if setting the key succeeded, %FALSE if the key was not writable
a #GSettings object
the name of the key to set
the value to set it to, or %NULL
Sets @key in @settings to @value.
A convenience variant of g_settings_set() for 32-bit unsigned
integers.
It is a programmer error to give a @key that isn't specified as
having a uint32 type in the schema for @settings.
%TRUE if setting the key succeeded, %FALSE if the key was not writable
a #GSettings object
the name of the key to set
the value to set it to
Sets @key in @settings to @value.
It is a programmer error to give a @key that isn't contained in the
schema for @settings or for @value to have the incorrect type, per
the schema.
If @value is floating then this function consumes the reference.
%TRUE if setting the key succeeded, %FALSE if the key was not writable
a #GSettings object
the name of the key to set
a #GVariant of the correct type
Whether the #GSettings object is in 'delay-apply' mode. See
g_settings_delay() for details.
If this property is %TRUE, the #GSettings object has outstanding
changes that will be applied when g_settings_apply() is called.
The path within the backend where the settings are stored.
The name of the schema that describes the types of keys
for this #GSettings object.
The type of this property is *not* #GSettingsSchema.
#GSettingsSchema has only existed since version 2.32 and
unfortunately this name was used in previous versions to refer to
the schema ID rather than the schema itself. Take care to use the
'settings-schema' property if you wish to pass in a
#GSettingsSchema.
The name of the schema that describes the types of keys
for this #GSettings object.
The #GSettingsSchema describing the types of keys for this
#GSettings object.
Ideally, this property would be called 'schema'. #GSettingsSchema
has only existed since version 2.32, however, and before then the
'schema' property was used to refer to the ID of the schema rather
than the schema itself. Take care.
The "change-event" signal is emitted once per change event that
affects this settings object. You should connect to this signal
only if you are interested in viewing groups of changes before they
are split out into multiple emissions of the "changed" signal.
For most use cases it is more appropriate to use the "changed" signal.
In the event that the change event applies to one or more specified
keys, @keys will be an array of #GQuark of length @n_keys. In the
event that the change event applies to the #GSettings object as a
whole (ie: potentially every key has been changed) then @keys will
be %NULL and @n_keys will be 0.
The default handler for this signal invokes the "changed" signal
for each affected key. If any other connected handler returns
%TRUE then this default functionality will be suppressed.
%TRUE to stop other handlers from being invoked for the event. FALSE to propagate the event further.
an array of #GQuark<!-- -->s for the changed keys, or %NULL
the length of the @keys array, or 0
The "changed" signal is emitted when a key has potentially changed.
You should call one of the g_settings_get() calls to check the new
value.
This signal supports detailed connections. You can connect to the
detailed signal "changed::x" in order to only receive callbacks
when key "x" changes.
the name of the key that changed
The "writable-change-event" signal is emitted once per writability
change event that affects this settings object. You should connect
to this signal if you are interested in viewing groups of changes
before they are split out into multiple emissions of the
"writable-changed" signal. For most use cases it is more
appropriate to use the "writable-changed" signal.
In the event that the writability change applies only to a single
key, @key will be set to the #GQuark for that key. In the event
that the writability change affects the entire settings object,
@key will be 0.
The default handler for this signal invokes the "writable-changed"
and "changed" signals for each affected key. This is done because
changes in writability might also imply changes in value (if for
example, a new mandatory setting is introduced). If any other
connected handler returns %TRUE then this default functionality
will be suppressed.
%TRUE to stop other handlers from being invoked for the event. FALSE to propagate the event further.
the quark of the key, or 0
The "writable-changed" signal is emitted when the writability of a
key has potentially changed. You should call
g_settings_is_writable() in order to determine the new status.
This signal supports detailed connections. You can connect to the
detailed signal "writable-changed::x" in order to only receive
callbacks when the writability of "x" changes.
the key
The #GSettingsBackend interface defines a generic interface for
non-strictly-typed data that is stored in a hierarchy. To implement
an alternative storage backend for #GSettings, you need to implement
the #GSettingsBackend interface and then make it implement the
extension point #G_SETTINGS_BACKEND_EXTENSION_POINT_NAME.
The interface defines methods for reading and writing values, a
method for determining if writing of certain values will fail
(lockdown) and a change notification mechanism.
The semantics of the interface are very precisely defined and
implementations must carefully adhere to the expectations of
callers that are documented on each of the interface methods.
Some of the GSettingsBackend functions accept or return a #GTree.
These trees always have strings as keys and #GVariant as values.
g_settings_backend_create_tree() is a convenience function to create
suitable trees.
<note><para>
The #GSettingsBackend API is exported to allow third-party
implementations, but does not carry the same stability guarantees
as the public GIO API. For this reason, you have to define the
C preprocessor symbol #G_SETTINGS_ENABLE_BACKEND before including
<filename>gio/gsettingsbackend.h</filename>
</para></note>
Flags used when creating a binding. These flags determine in which
direction the binding works. The default is to synchronize in both
directions.
Equivalent to <literal>G_SETTINGS_BIND_GET|G_SETTINGS_BIND_SET</literal>
Update the #GObject property when the setting changes. It is an error to use this flag if the property is not writable.
Update the setting when the #GObject property changes. It is an error to use this flag if the property is not readable.
Do not try to bind a "sensitivity" property to the writability of the setting
When set in addition to #G_SETTINGS_BIND_GET, set the #GObject property value initially from the setting, but do not listen for changes of the setting
When passed to g_settings_bind(), uses a pair of mapping functions that invert the boolean value when mapping between the setting and the property. The setting and property must both be booleans. You cannot pass this flag to g_settings_bind_with_mapping().
The type for the function that is used to convert from #GSettings to
an object property. The @value is already initialized to hold values
of the appropriate type.
%TRUE if the conversion succeeded, %FALSE in case of an error
return location for the property value
the #GVariant
user data that was specified when the binding was created
The type for the function that is used to convert an object property
value to a #GVariant for storing it in #GSettings.
a new #GVariant holding the data from @value, or %NULL in case of an error
a #GValue containing the property value to map
the #GVariantType to create
user data that was specified when the binding was created
The type of the function that is used to convert from a value stored
in a #GSettings to a value that is useful to the application.
If the value is successfully mapped, the result should be stored at
@result and %TRUE returned. If mapping fails (for example, if @value
is not in the right format) then %FALSE should be returned.
If @value is %NULL then it means that the mapping function is being
given a "last chance" to successfully return a valid value. %TRUE
must be returned in this case.
%TRUE if the conversion succeeded, %FALSE in case of an error
the #GVariant to map, or %NULL
the result of the mapping
the user data that was passed to g_settings_get_mapped()
The #GSettingsSchemaSource and #GSettingsSchema APIs provide a
mechanism for advanced control over the loading of schemas and a
mechanism for introspecting their content.
Plugin loading systems that wish to provide plugins a way to access
settings face the problem of how to make the schemas for these
settings visible to GSettings. Typically, a plugin will want to ship
the schema along with itself and it won't be installed into the
standard system directories for schemas.
#GSettingsSchemaSource provides a mechanism for dealing with this by
allowing the creation of a new 'schema source' from which schemas can
be acquired. This schema source can then become part of the metadata
associated with the plugin and queried whenever the plugin requires
access to some settings.
Consider the following example:
|[
typedef struct
{
...
GSettingsSchemaSource *schema_source;
...
} Plugin;
Plugin *
initialise_plugin (const gchar *dir)
{
Plugin *plugin;
...
plugin->schema_source =
g_settings_new_schema_source_from_directory (dir,
g_settings_schema_source_get_default (), FALSE, NULL);
...
return plugin;
}
...
GSettings *
plugin_get_settings (Plugin *plugin,
const gchar *schema_id)
{
GSettingsSchema *schema;
if (schema_id == NULL)
schema_id = plugin->identifier;
schema = g_settings_schema_source_lookup (plugin->schema_source,
schema_id, FALSE);
if (schema == NULL)
{
... disable the plugin or abort, etc ...
}
return g_settings_new_full (schema, NULL, NULL);
}
]|
The code above shows how hooks should be added to the code that
initialises (or enables) the plugin to create the schema source and
how an API can be added to the plugin system to provide a convenient
way for the plugin to access its settings, using the schemas that it
ships.
From the standpoint of the plugin, it would need to ensure that it
ships a gschemas.compiled file as part of itself, and then simply do
the following:
|[
{
GSettings *settings;
gint some_value;
settings = plugin_get_settings (self, NULL);
some_value = g_settings_get_int (settings, "some-value");
...
}
]|
It's also possible that the plugin system expects the schema source
files (ie: .gschema.xml files) instead of a gschemas.compiled file.
In that case, the plugin loading system must compile the schemas for
itself before attempting to create the settings source.
Get the ID of @schema.
the ID
a #GSettingsSchema
Gets the path associated with @schema, or %NULL.
Schemas may be single-instance or relocatable. Single-instance
schemas correspond to exactly one set of keys in the backend
database: those located at the path returned by this function.
Relocatable schemas can be referenced by other schemas and can
threfore describe multiple sets of keys at different locations. For
relocatable schemas, this function will return %NULL.
the path of the schema, or %NULL
a #GSettingsSchema
Increase the reference count of @schema, returning a new reference.
a new reference to @schema
a #GSettingsSchema
Decrease the reference count of @schema, possibly freeing it.
a #GSettingsSchema
This is an opaque structure type. You may not access it directly.
Attempts to create a new schema source corresponding to the contents
of the given directory.
This function is not required for normal uses of #GSettings but it
may be useful to authors of plugin management systems.
The directory should contain a file called
<filename>gschemas.compiled</filename> as produced by
<command>glib-compile-schemas</command>.
If @trusted is %TRUE then <filename>gschemas.compiled</filename> is
trusted not to be corrupted. This assumption has a performance
advantage, but can result in crashes or inconsistent behaviour in the
case of a corrupted file. Generally, you should set @trusted to
%TRUE for files installed by the system and to %FALSE for files in
the home directory.
If @parent is non-%NULL then there are two effects.
First, if g_settings_schema_source_lookup() is called with the
@recursive flag set to %TRUE and the schema can not be found in the
source, the lookup will recurse to the parent.
Second, any references to other schemas specified within this
source (ie: <literal>child</literal> or <literal>extends</literal>)
references may be resolved from the @parent.
For this second reason, except in very unusual situations, the
@parent should probably be given as the default schema source, as
returned by g_settings_schema_source_get_default().
the filename of a directory
a #GSettingsSchemaSource, or %NULL
%TRUE, if the directory is trusted
Looks up a schema with the identifier @schema_id in @source.
This function is not required for normal uses of #GSettings but it
may be useful to authors of plugin management systems or to those who
want to introspect the content of schemas.
If the schema isn't found directly in @source and @recursive is %TRUE
then the parent sources will also be checked.
If the schema isn't found, %NULL is returned.
a new #GSettingsSchema
a #GSettingsSchemaSource
a schema ID
%TRUE if the lookup should be recursive
Increase the reference count of @source, returning a new reference.
a new reference to @source
a #GSettingsSchemaSource
Decrease the reference count of @source, possibly freeing it.
a #GSettingsSchemaSource
Gets the default system schema source.
This function is not required for normal uses of #GSettings but it
may be useful to authors of plugin management systems or to those who
want to introspect the content of schemas.
If no schemas are installed, %NULL will be returned.
The returned source may actually consist of multiple schema sources
from different directories, depending on which directories were given
in <envar>XDG_DATA_DIRS</envar> and
<envar>GSETTINGS_SCHEMA_DIR</envar>. For this reason, all lookups
performed against the default source should probably be done
recursively.
the default schema source
A #GSimpleAction is the obvious simple implementation of the #GAction
interface. This is the easiest way to create an action for purposes of
adding it to a #GSimpleActionGroup.
See also #GtkAction.
Creates a new action.
The created action is stateless. See g_simple_action_new_stateful().
a new #GSimpleAction
the name of the action
the type of parameter to the activate function
Creates a new stateful action.
@state is the initial state of the action. All future state values
must have the same #GVariantType as the initial state.
If the @state GVariant is floating, it is consumed.
a new #GSimpleAction
the name of the action
the type of the parameter to the activate function
the initial state of the action
Sets the action as enabled or not.
An action must be enabled in order to be activated or in order to
have its state changed from outside callers.
This should only be called by the implementor of the action. Users
of the action should not attempt to modify its enabled flag.
a #GSimpleAction
whether the action is enabled
Sets the state of the action.
This directly updates the 'state' property to the given value.
This should only be called by the implementor of the action. Users
of the action should not attempt to directly modify the 'state'
property. Instead, they should call g_action_change_state() to
request the change.
If the @value GVariant is floating, it is consumed.
a #GSimpleAction
the new #GVariant for the state
If @action is currently enabled.
If the action is disabled then calls to g_action_activate() and
g_action_change_state() have no effect.
The name of the action. This is mostly meaningful for identifying
the action once it has been added to a #GSimpleActionGroup.
The type of the parameter that must be given when activating the
action.
The state of the action, or %NULL if the action is stateless.
The #GVariantType of the state that the action has, or %NULL if the
action is stateless.
Indicates that the action was just activated.
@parameter will always be of the expected type. In the event that
an incorrect type was given, no signal will be emitted.
the parameter to the activation
Indicates that the action just received a request to change its
state.
@value will always be of the correct state type. In the event that
an incorrect type was given, no signal will be emitted.
If no handler is connected to this signal then the default
behaviour is to call g_simple_action_set_state() to set the state
to the requested value. If you connect a signal handler then no
default action is taken. If the state should change then you must
call g_simple_action_set_state() from the handler.
<example>
<title>Example 'change-state' handler</title>
<programlisting>
static void
change_volume_state (GSimpleAction *action,
GVariant *value,
gpointer user_data)
{
gint requested;
requested = g_variant_get_int32 (value);
// Volume only goes from 0 to 10
if (0 <= requested && requested <= 10)
g_simple_action_set_state (action, value);
}
</programlisting>
</example>
The handler need not set the state to the requested value. It
could set it to any value at all, or take some other action.
the requested value for the state
#GSimpleActionGroup is a hash table filled with #GAction objects,
implementing the #GActionGroup and #GActionMap interfaces.
Creates a new, empty, #GSimpleActionGroup.
a new #GSimpleActionGroup
A convenience function for creating multiple #GSimpleAction instances
and adding them to the action group.
a #GSimpleActionGroup
a pointer to the first item in an array of #GActionEntry structs
the length of @entries, or -1
the user data for signal connections
Adds an action to the action group.
If the action group already contains an action with the same name as
@action then the old action is dropped from the group.
The action group takes its own reference on @action.
a #GSimpleActionGroup
a #GAction
Looks up the action with the name @action_name in the group.
If no such action exists, returns %NULL.
a #GAction, or %NULL
a #GSimpleActionGroup
the name of an action
Removes the named action from the action group.
If no action of this name is in the group then nothing happens.
a #GSimpleActionGroup
the name of the action
<note><para>
As of GLib 2.36, #GSimpleAsyncResult is deprecated in favor of
#GTask, which provides a simpler API.
</para></note>
#GSimpleAsyncResult implements #GAsyncResult.
GSimpleAsyncResult handles #GAsyncReadyCallback<!-- -->s, error
reporting, operation cancellation and the final state of an operation,
completely transparent to the application. Results can be returned
as a pointer e.g. for functions that return data that is collected
asynchronously, a boolean value for checking the success or failure
of an operation, or a #gssize for operations which return the number
of bytes modified by the operation; all of the simple return cases
are covered.
Most of the time, an application will not need to know of the details
of this API; it is handled transparently, and any necessary operations
are handled by #GAsyncResult's interface. However, if implementing a
new GIO module, for writing language bindings, or for complex
applications that need better control of how asynchronous operations
are completed, it is important to understand this functionality.
GSimpleAsyncResults are tagged with the calling function to ensure
that asynchronous functions and their finishing functions are used
together correctly.
To create a new #GSimpleAsyncResult, call g_simple_async_result_new().
If the result needs to be created for a #GError, use
g_simple_async_result_new_from_error() or
g_simple_async_result_new_take_error(). If a #GError is not available
(e.g. the asynchronous operation's doesn't take a #GError argument),
but the result still needs to be created for an error condition, use
g_simple_async_result_new_error() (or g_simple_async_result_set_error_va()
if your application or binding requires passing a variable argument list
directly), and the error can then be propagated through the use of
g_simple_async_result_propagate_error().
An asynchronous operation can be made to ignore a cancellation event by
calling g_simple_async_result_set_handle_cancellation() with a
#GSimpleAsyncResult for the operation and %FALSE. This is useful for
operations that are dangerous to cancel, such as close (which would
cause a leak if cancelled before being run).
GSimpleAsyncResult can integrate into GLib's event loop, #GMainLoop,
or it can use #GThread<!-- -->s.
g_simple_async_result_complete() will finish an I/O task directly
from the point where it is called. g_simple_async_result_complete_in_idle()
will finish it from an idle handler in the <link
linkend="g-main-context-push-thread-default">thread-default main
context</link>. g_simple_async_result_run_in_thread() will run the
job in a separate thread and then deliver the result to the
thread-default main context.
To set the results of an asynchronous function,
g_simple_async_result_set_op_res_gpointer(),
g_simple_async_result_set_op_res_gboolean(), and
g_simple_async_result_set_op_res_gssize()
are provided, setting the operation's result to a gpointer, gboolean, or
gssize, respectively.
Likewise, to get the result of an asynchronous function,
g_simple_async_result_get_op_res_gpointer(),
g_simple_async_result_get_op_res_gboolean(), and
g_simple_async_result_get_op_res_gssize() are
provided, getting the operation's result as a gpointer, gboolean, and
gssize, respectively.
For the details of the requirements implementations must respect, see
#GAsyncResult. A typical implementation of an asynchronous operation
using GSimpleAsyncResult looks something like this:
|[
static void
baked_cb (Cake *cake,
gpointer user_data)
{
/* In this example, this callback is not given a reference to the cake, so
* the GSimpleAsyncResult has to take a reference to it.
*/
GSimpleAsyncResult *result = user_data;
if (cake == NULL)
g_simple_async_result_set_error (result,
BAKER_ERRORS,
BAKER_ERROR_NO_FLOUR,
"Go to the supermarket");
else
g_simple_async_result_set_op_res_gpointer (result,
g_object_ref (cake),
g_object_unref);
/* In this example, we assume that baked_cb is called as a callback from
* the mainloop, so it's safe to complete the operation synchronously here.
* If, however, _baker_prepare_cake () might call its callback without
* first returning to the mainloop — inadvisable, but some APIs do so —
* we would need to use g_simple_async_result_complete_in_idle().
*/
g_simple_async_result_complete (result);
g_object_unref (result);
}
void
baker_bake_cake_async (Baker *self,
guint radius,
GAsyncReadyCallback callback,
gpointer user_data)
{
GSimpleAsyncResult *simple;
Cake *cake;
if (radius < 3)
{
g_simple_async_report_error_in_idle (G_OBJECT (self),
callback,
user_data,
BAKER_ERRORS,
BAKER_ERROR_TOO_SMALL,
"%ucm radius cakes are silly",
radius);
return;
}
simple = g_simple_async_result_new (G_OBJECT (self),
callback,
user_data,
baker_bake_cake_async);
cake = _baker_get_cached_cake (self, radius);
if (cake != NULL)
{
g_simple_async_result_set_op_res_gpointer (simple,
g_object_ref (cake),
g_object_unref);
g_simple_async_result_complete_in_idle (simple);
g_object_unref (simple);
/* Drop the reference returned by _baker_get_cached_cake(); the
* GSimpleAsyncResult has taken its own reference.
*/
g_object_unref (cake);
return;
}
_baker_prepare_cake (self, radius, baked_cb, simple);
}
Cake *
baker_bake_cake_finish (Baker *self,
GAsyncResult *result,
GError **error)
{
GSimpleAsyncResult *simple;
Cake *cake;
g_return_val_if_fail (g_simple_async_result_is_valid (result,
G_OBJECT (self),
baker_bake_cake_async),
NULL);
simple = (GSimpleAsyncResult *) result;
if (g_simple_async_result_propagate_error (simple, error))
return NULL;
cake = CAKE (g_simple_async_result_get_op_res_gpointer (simple));
return g_object_ref (cake);
}
]|
Creates a #GSimpleAsyncResult.
The common convention is to create the #GSimpleAsyncResult in the
function that starts the asynchronous operation and use that same
function as the @source_tag.
If your operation supports cancellation with #GCancellable (which it
probably should) then you should provide the user's cancellable to
g_simple_async_result_set_check_cancellable() immediately after
this function returns.
a #GSimpleAsyncResult.
a #GObject, or %NULL.
a #GAsyncReadyCallback.
user data passed to @callback.
the asynchronous function.
Creates a new #GSimpleAsyncResult with a set error.
a #GSimpleAsyncResult.
a #GObject, or %NULL.
a #GAsyncReadyCallback.
user data passed to @callback.
a #GQuark.
an error code.
a string with format characters.
Creates a #GSimpleAsyncResult from an error condition.
a #GSimpleAsyncResult.
a #GObject, or %NULL.
a #GAsyncReadyCallback.
user data passed to @callback.
a #GError
Creates a #GSimpleAsyncResult from an error condition, and takes over the
caller's ownership of @error, so the caller does not need to free it anymore.
a #GSimpleAsyncResult
a #GObject, or %NULL
a #GAsyncReadyCallback
user data passed to @callback
a #GError
Ensures that the data passed to the _finish function of an async
operation is consistent. Three checks are performed.
First, @result is checked to ensure that it is really a
#GSimpleAsyncResult. Second, @source is checked to ensure that it
matches the source object of @result. Third, @source_tag is
checked to ensure that it is either %NULL (as it is when the result was
created by g_simple_async_report_error_in_idle() or
g_simple_async_report_gerror_in_idle()) or equal to the
@source_tag argument given to g_simple_async_result_new() (which, by
convention, is a pointer to the _async function corresponding to the
_finish function from which this function is called).
#TRUE if all checks passed or #FALSE if any failed.
the #GAsyncResult passed to the _finish function.
the #GObject passed to the _finish function.
the asynchronous function.
Completes an asynchronous I/O job immediately. Must be called in
the thread where the asynchronous result was to be delivered, as it
invokes the callback directly. If you are in a different thread use
g_simple_async_result_complete_in_idle().
Calling this function takes a reference to @simple for as long as
is needed to complete the call.
a #GSimpleAsyncResult.
Completes an asynchronous function in an idle handler in the <link
linkend="g-main-context-push-thread-default">thread-default main
loop</link> of the thread that @simple was initially created in
(and re-pushes that context around the invocation of the callback).
Calling this function takes a reference to @simple for as long as
is needed to complete the call.
a #GSimpleAsyncResult.
Gets the operation result boolean from within the asynchronous result.
%TRUE if the operation's result was %TRUE, %FALSE if the operation's result was %FALSE.
a #GSimpleAsyncResult.
Gets a pointer result as returned by the asynchronous function.
a pointer from the result.
a #GSimpleAsyncResult.
Gets a gssize from the asynchronous result.
a gssize returned from the asynchronous function.
a #GSimpleAsyncResult.
Gets the source tag for the #GSimpleAsyncResult.
a #gpointer to the source object for the #GSimpleAsyncResult.
a #GSimpleAsyncResult.
Propagates an error from within the simple asynchronous result to
a given destination.
If the #GCancellable given to a prior call to
g_simple_async_result_set_check_cancellable() is cancelled then this
function will return %TRUE with @dest set appropriately.
%TRUE if the error was propagated to @dest. %FALSE otherwise.
a #GSimpleAsyncResult.
Runs the asynchronous job in a separate thread and then calls
g_simple_async_result_complete_in_idle() on @simple to return
the result to the appropriate main loop.
Calling this function takes a reference to @simple for as long as
is needed to run the job and report its completion.
a #GSimpleAsyncResult.
a #GSimpleAsyncThreadFunc.
the io priority of the request.
optional #GCancellable object, %NULL to ignore.
Sets a #GCancellable to check before dispatching results.
This function has one very specific purpose: the provided cancellable
is checked at the time of g_simple_async_result_propagate_error() If
it is cancelled, these functions will return an "Operation was
cancelled" error (%G_IO_ERROR_CANCELLED).
Implementors of cancellable asynchronous functions should use this in
order to provide a guarantee to their callers that cancelling an
async operation will reliably result in an error being returned for
that operation (even if a positive result for the operation has
already been sent as an idle to the main context to be dispatched).
The checking described above is done regardless of any call to the
unrelated g_simple_async_result_set_handle_cancellation() function.
a #GSimpleAsyncResult
a #GCancellable to check, or %NULL to unset
Sets an error within the asynchronous result without a #GError.
a #GSimpleAsyncResult.
a #GQuark (usually #G_IO_ERROR).
an error code.
a formatted error reporting string.
Sets an error within the asynchronous result without a #GError.
Unless writing a binding, see g_simple_async_result_set_error().
a #GSimpleAsyncResult.
a #GQuark (usually #G_IO_ERROR).
an error code.
a formatted error reporting string.
va_list of arguments.
Sets the result from a #GError.
a #GSimpleAsyncResult.
#GError.
Sets whether to handle cancellation within the asynchronous operation.
This function has nothing to do with
g_simple_async_result_set_check_cancellable(). It only refers to the
#GCancellable passed to g_simple_async_result_run_in_thread().
a #GSimpleAsyncResult.
a #gboolean.
Sets the operation result to a boolean within the asynchronous result.
a #GSimpleAsyncResult.
a #gboolean.
Sets the operation result within the asynchronous result to a pointer.
a #GSimpleAsyncResult.
a pointer result from an asynchronous function.
a #GDestroyNotify function.
Sets the operation result within the asynchronous result to
the given @op_res.
a #GSimpleAsyncResult.
a #gssize.
Sets the result from @error, and takes over the caller's ownership
of @error, so the caller does not need to free it any more.
a #GSimpleAsyncResult
a #GError
Simple thread function that runs an asynchronous operation and
checks for cancellation.
a #GSimpleAsyncResult.
a #GObject.
optional #GCancellable object, %NULL to ignore.
#GSimplePermission is a trivial implementation of #GPermission that
represents a permission that is either always or never allowed. The
value is given at construction and doesn't change.
Calling request or release will result in errors.
Creates a new #GPermission instance that represents an action that is
either always or never allowed.
the #GSimplePermission, as a #GPermission
%TRUE if the action is allowed
#GSimpleProxyResolver is a simple #GProxyResolver implementation
that handles a single default proxy, multiple URI-scheme-specific
proxies, and a list of hosts that proxies should not be used for.
#GSimpleProxyResolver is never the default proxy resolver, but it
can be used as the base class for another proxy resolver
implementation, or it can be created and used manually, such as
with g_socket_client_set_proxy_resolver().
Creates a new #GSimpleProxyResolver. See
#GSimpleProxyResolver:default-proxy and
#GSimpleProxyResolver:ignore-hosts for more details on how the
arguments are interpreted.
a new #GSimpleProxyResolver
the default proxy to use, eg "socks://192.168.1.1"
an optional list of hosts/IP addresses to not use a proxy for.
Sets the default proxy on @resolver, to be used for any URIs that
don't match #GSimpleProxyResolver:ignore-hosts or a proxy set
via g_simple_proxy_resolver_set_uri_proxy().
If @default_proxy starts with "<literal>socks://</literal>",
#GSimpleProxyResolver will treat it as referring to all three of
the <literal>socks5</literal>, <literal>socks4a</literal>, and
<literal>socks4</literal> proxy types.
a #GSimpleProxyResolver
the default proxy to use
Sets the list of ignored hosts.
See #GSimpleProxyResolver:ignore-hosts for more details on how the
@ignore_hosts argument is interpreted.
a #GSimpleProxyResolver
%NULL-terminated list of hosts/IP addresses to not use a proxy for
Adds a URI-scheme-specific proxy to @resolver; URIs whose scheme
matches @uri_scheme (and which don't match
#GSimpleProxyResolver:ignore-hosts) will be proxied via @proxy.
As with #GSimpleProxyResolver:default-proxy, if @proxy starts with
"<literal>socks://</literal>", #GSimpleProxyResolver will treat it
as referring to all three of the <literal>socks5</literal>,
<literal>socks4a</literal>, and <literal>socks4</literal> proxy
types.
a #GSimpleProxyResolver
the URI scheme to add a proxy for
the proxy to use for @uri_scheme
The default proxy URI that will be used for any URI that doesn't
match #GSimpleProxyResolver:ignore-hosts, and doesn't match any
of the schemes set with g_simple_proxy_resolver_set_uri_proxy().
Note that as a special case, if this URI starts with
"<literal>socks://</literal>", #GSimpleProxyResolver will treat
it as referring to all three of the <literal>socks5</literal>,
<literal>socks4a</literal>, and <literal>socks4</literal> proxy
types.
A list of hostnames and IP addresses that the resolver should
allow direct connections to.
Entries can be in one of 4 formats:
<itemizedlist>
<listitem>
A hostname, such as "<literal>example.com</literal>",
"<literal>.example.com</literal>", or
"<literal>*.example.com</literal>", any of which match
"<literal>example.com</literal>" or any subdomain of it.
</listitem>
<listitem>
An IPv4 or IPv6 address, such as
"<literal>192.168.1.1</literal>", which matches only
that address.
</listitem>
<listitem>
A hostname or IP address followed by a port, such as
"<literal>example.com:80</literal>", which matches whatever
the hostname or IP address would match, but only for URLs
with the (explicitly) indicated port. In the case of an IPv6
address, the address part must appear in brackets:
"<literal>[::1]:443</literal>"
</listitem>
<listitem>
An IP address range, given by a base address and prefix length,
such as "<literal>fe80::/10</literal>", which matches any
address in that range.
</listitem>
</itemizedlist>
Note that when dealing with Unicode hostnames, the matching is
done against the ASCII form of the name.
Also note that hostname exclusions apply only to connections made
to hosts identified by name, and IP address exclusions apply only
to connections made to hosts identified by address. That is, if
<literal>example.com</literal> has an address of
<literal>192.168.1.1</literal>, and the :ignore-hosts list
contains only "<literal>192.168.1.1</literal>", then a connection
to "<literal>example.com</literal>" (eg, via a #GNetworkAddress)
will use the proxy, and a connection to
"<literal>192.168.1.1</literal>" (eg, via a #GInetSocketAddress)
will not.
These rules match the "ignore-hosts"/"noproxy" rules most
commonly used by other applications.
A #GSocket is a low-level networking primitive. It is a more or less
direct mapping of the BSD socket API in a portable GObject based API.
It supports both the UNIX socket implementations and winsock2 on Windows.
#GSocket is the platform independent base upon which the higher level
network primitives are based. Applications are not typically meant to
use it directly, but rather through classes like #GSocketClient,
#GSocketService and #GSocketConnection. However there may be cases where
direct use of #GSocket is useful.
#GSocket implements the #GInitable interface, so if it is manually constructed
by e.g. g_object_new() you must call g_initable_init() and check the
results before using the object. This is done automatically in
g_socket_new() and g_socket_new_from_fd(), so these functions can return
%NULL.
Sockets operate in two general modes, blocking or non-blocking. When
in blocking mode all operations block until the requested operation
is finished or there is an error. In non-blocking mode all calls that
would block return immediately with a %G_IO_ERROR_WOULD_BLOCK error.
To know when a call would successfully run you can call g_socket_condition_check(),
or g_socket_condition_wait(). You can also use g_socket_create_source() and
attach it to a #GMainContext to get callbacks when I/O is possible.
Note that all sockets are always set to non blocking mode in the system, and
blocking mode is emulated in GSocket.
When working in non-blocking mode applications should always be able to
handle getting a %G_IO_ERROR_WOULD_BLOCK error even when some other
function said that I/O was possible. This can easily happen in case
of a race condition in the application, but it can also happen for other
reasons. For instance, on Windows a socket is always seen as writable
until a write returns %G_IO_ERROR_WOULD_BLOCK.
#GSocket<!-- -->s can be either connection oriented or datagram based.
For connection oriented types you must first establish a connection by
either connecting to an address or accepting a connection from another
address. For connectionless socket types the target/source address is
specified or received in each I/O operation.
All socket file descriptors are set to be close-on-exec.
Note that creating a #GSocket causes the signal %SIGPIPE to be
ignored for the remainder of the program. If you are writing a
command-line utility that uses #GSocket, you may need to take into
account the fact that your program will not automatically be killed
if it tries to write to %stdout after it has been closed.
Creates a new #GSocket with the defined family, type and protocol.
If @protocol is 0 (%G_SOCKET_PROTOCOL_DEFAULT) the default protocol type
for the family and type is used.
The @protocol is a family and type specific int that specifies what
kind of protocol to use. #GSocketProtocol lists several common ones.
Many families only support one protocol, and use 0 for this, others
support several and using 0 means to use the default protocol for
the family and type.
The protocol id is passed directly to the operating
system, so you can use protocols not listed in #GSocketProtocol if you
know the protocol number used for it.
a #GSocket or %NULL on error. Free the returned object with g_object_unref().
the socket family to use, e.g. %G_SOCKET_FAMILY_IPV4.
the socket type to use.
the id of the protocol to use, or 0 for default.
Creates a new #GSocket from a native file descriptor
or winsock SOCKET handle.
This reads all the settings from the file descriptor so that
all properties should work. Note that the file descriptor
will be set to non-blocking mode, independent on the blocking
mode of the #GSocket.
a #GSocket or %NULL on error. Free the returned object with g_object_unref().
a native socket file descriptor.
Accept incoming connections on a connection-based socket. This removes
the first outstanding connection request from the listening socket and
creates a #GSocket object for it.
The @socket must be bound to a local address with g_socket_bind() and
must be listening for incoming connections (g_socket_listen()).
If there are no outstanding connections then the operation will block
or return %G_IO_ERROR_WOULD_BLOCK if non-blocking I/O is enabled.
To be notified of an incoming connection, wait for the %G_IO_IN condition.
a new #GSocket, or %NULL on error. Free the returned object with g_object_unref().
a #GSocket.
a %GCancellable or %NULL
When a socket is created it is attached to an address family, but it
doesn't have an address in this family. g_socket_bind() assigns the
address (sometimes called name) of the socket.
It is generally required to bind to a local address before you can
receive connections. (See g_socket_listen() and g_socket_accept() ).
In certain situations, you may also want to bind a socket that will be
used to initiate connections, though this is not normally required.
If @socket is a TCP socket, then @allow_reuse controls the setting
of the <literal>SO_REUSEADDR</literal> socket option; normally it
should be %TRUE for server sockets (sockets that you will
eventually call g_socket_accept() on), and %FALSE for client
sockets. (Failing to set this flag on a server socket may cause
g_socket_bind() to return %G_IO_ERROR_ADDRESS_IN_USE if the server
program is stopped and then immediately restarted.)
If @socket is a UDP socket, then @allow_reuse determines whether or
not other UDP sockets can be bound to the same address at the same
time. In particular, you can have several UDP sockets bound to the
same address, and they will all receive all of the multicast and
broadcast packets sent to that address. (The behavior of unicast
UDP packets to an address with multiple listeners is not defined.)
%TRUE on success, %FALSE on error.
a #GSocket.
a #GSocketAddress specifying the local address.
whether to allow reusing this address
Checks and resets the pending connect error for the socket.
This is used to check for errors when g_socket_connect() is
used in non-blocking mode.
%TRUE if no error, %FALSE otherwise, setting @error to the error
a #GSocket
Closes the socket, shutting down any active connection.
Closing a socket does not wait for all outstanding I/O operations
to finish, so the caller should not rely on them to be guaranteed
to complete even if the close returns with no error.
Once the socket is closed, all other operations will return
%G_IO_ERROR_CLOSED. Closing a socket multiple times will not
return an error.
Sockets will be automatically closed when the last reference
is dropped, but you might want to call this function to make sure
resources are released as early as possible.
Beware that due to the way that TCP works, it is possible for
recently-sent data to be lost if either you close a socket while the
%G_IO_IN condition is set, or else if the remote connection tries to
send something to you after you close the socket but before it has
finished reading all of the data you sent. There is no easy generic
way to avoid this problem; the easiest fix is to design the network
protocol such that the client will never send data "out of turn".
Another solution is for the server to half-close the connection by
calling g_socket_shutdown() with only the @shutdown_write flag set,
and then wait for the client to notice this and close its side of the
connection, after which the server can safely call g_socket_close().
(This is what #GTcpConnection does if you call
g_tcp_connection_set_graceful_disconnect(). But of course, this
only works if the client will close its connection after the server
does.)
%TRUE on success, %FALSE on error
a #GSocket
Checks on the readiness of @socket to perform operations.
The operations specified in @condition are checked for and masked
against the currently-satisfied conditions on @socket. The result
is returned.
Note that on Windows, it is possible for an operation to return
%G_IO_ERROR_WOULD_BLOCK even immediately after
g_socket_condition_check() has claimed that the socket is ready for
writing. Rather than calling g_socket_condition_check() and then
writing to the socket if it succeeds, it is generally better to
simply try writing to the socket right away, and try again later if
the initial attempt returns %G_IO_ERROR_WOULD_BLOCK.
It is meaningless to specify %G_IO_ERR or %G_IO_HUP in condition;
these conditions will always be set in the output if they are true.
This call never blocks.
the @GIOCondition mask of the current state
a #GSocket
a #GIOCondition mask to check
Waits for up to @timeout microseconds for @condition to become true
on @socket. If the condition is met, %TRUE is returned.
If @cancellable is cancelled before the condition is met, or if
@timeout (or the socket's #GSocket:timeout) is reached before the
condition is met, then %FALSE is returned and @error, if non-%NULL,
is set to the appropriate value (%G_IO_ERROR_CANCELLED or
%G_IO_ERROR_TIMED_OUT).
If you don't want a timeout, use g_socket_condition_wait().
(Alternatively, you can pass -1 for @timeout.)
Note that although @timeout is in microseconds for consistency with
other GLib APIs, this function actually only has millisecond
resolution, and the behavior is undefined if @timeout is not an
exact number of milliseconds.
%TRUE if the condition was met, %FALSE otherwise
a #GSocket
a #GIOCondition mask to wait for
the maximum time (in microseconds) to wait, or -1
a #GCancellable, or %NULL
Waits for @condition to become true on @socket. When the condition
is met, %TRUE is returned.
If @cancellable is cancelled before the condition is met, or if the
socket has a timeout set and it is reached before the condition is
met, then %FALSE is returned and @error, if non-%NULL, is set to
the appropriate value (%G_IO_ERROR_CANCELLED or
%G_IO_ERROR_TIMED_OUT).
See also g_socket_condition_timed_wait().
%TRUE if the condition was met, %FALSE otherwise
a #GSocket
a #GIOCondition mask to wait for
a #GCancellable, or %NULL
Connect the socket to the specified remote address.
For connection oriented socket this generally means we attempt to make
a connection to the @address. For a connection-less socket it sets
the default address for g_socket_send() and discards all incoming datagrams
from other sources.
Generally connection oriented sockets can only connect once, but
connection-less sockets can connect multiple times to change the
default address.
If the connect call needs to do network I/O it will block, unless
non-blocking I/O is enabled. Then %G_IO_ERROR_PENDING is returned
and the user can be notified of the connection finishing by waiting
for the G_IO_OUT condition. The result of the connection must then be
checked with g_socket_check_connect_result().
%TRUE if connected, %FALSE on error.
a #GSocket.
a #GSocketAddress specifying the remote address.
a %GCancellable or %NULL
Creates a #GSocketConnection subclass of the right type for
@socket.
a #GSocketConnection
a #GSocket
Creates a %GSource that can be attached to a %GMainContext to monitor
for the availibility of the specified @condition on the socket.
The callback on the source is of the #GSocketSourceFunc type.
It is meaningless to specify %G_IO_ERR or %G_IO_HUP in @condition;
these conditions will always be reported output if they are true.
@cancellable if not %NULL can be used to cancel the source, which will
cause the source to trigger, reporting the current condition (which
is likely 0 unless cancellation happened at the same time as a
condition change). You can check for this in the callback using
g_cancellable_is_cancelled().
If @socket has a timeout set, and it is reached before @condition
occurs, the source will then trigger anyway, reporting %G_IO_IN or
%G_IO_OUT depending on @condition. However, @socket will have been
marked as having had a timeout, and so the next #GSocket I/O method
you call will then fail with a %G_IO_ERROR_TIMED_OUT.
a newly allocated %GSource, free with g_source_unref().
a #GSocket
a #GIOCondition mask to monitor
a %GCancellable or %NULL
Get the amount of data pending in the OS input buffer.
If @socket is a UDP or SCTP socket, this will return the size of
just the next packet, even if additional packets are buffered after
that one.
Note that on Windows, this function is rather inefficient in the
UDP case, and so if you know any plausible upper bound on the size
of the incoming packet, it is better to just do a
g_socket_receive() with a buffer of that size, rather than calling
g_socket_get_available_bytes() first and then doing a receive of
exactly the right size.
the number of bytes that can be read from the socket without blocking or truncating, or -1 on error.
a #GSocket
Gets the blocking mode of the socket. For details on blocking I/O,
see g_socket_set_blocking().
%TRUE if blocking I/O is used, %FALSE otherwise.
a #GSocket.
Gets the broadcast setting on @socket; if %TRUE,
it is possible to send packets to broadcast
addresses.
the broadcast setting on @socket
a #GSocket.
Returns the credentials of the foreign process connected to this
socket, if any (e.g. it is only supported for %G_SOCKET_FAMILY_UNIX
sockets).
If this operation isn't supported on the OS, the method fails with
the %G_IO_ERROR_NOT_SUPPORTED error. On Linux this is implemented
by reading the %SO_PEERCRED option on the underlying socket.
Other ways to obtain credentials from a foreign peer includes the
#GUnixCredentialsMessage type and
g_unix_connection_send_credentials() /
g_unix_connection_receive_credentials() functions.
%NULL if @error is set, otherwise a #GCredentials object that must be freed with g_object_unref().
a #GSocket.
Gets the socket family of the socket.
a #GSocketFamily
a #GSocket.
Returns the underlying OS socket object. On unix this
is a socket file descriptor, and on Windows this is
a Winsock2 SOCKET handle. This may be useful for
doing platform specific or otherwise unusual operations
on the socket.
the file descriptor of the socket.
a #GSocket.
Gets the keepalive mode of the socket. For details on this,
see g_socket_set_keepalive().
%TRUE if keepalive is active, %FALSE otherwise.
a #GSocket.
Gets the listen backlog setting of the socket. For details on this,
see g_socket_set_listen_backlog().
the maximum number of pending connections.
a #GSocket.
Try to get the local address of a bound socket. This is only
useful if the socket has been bound to a local address,
either explicitly or implicitly when connecting.
a #GSocketAddress or %NULL on error. Free the returned object with g_object_unref().
a #GSocket.
Gets the multicast loopback setting on @socket; if %TRUE (the
default), outgoing multicast packets will be looped back to
multicast listeners on the same host.
the multicast loopback setting on @socket
a #GSocket.
Gets the multicast time-to-live setting on @socket; see
g_socket_set_multicast_ttl() for more details.
the multicast time-to-live setting on @socket
a #GSocket.
Gets the value of an integer-valued option on @socket, as with
<literal>getsockopt ()</literal>. (If you need to fetch a
non-integer-valued option, you will need to call
<literal>getsockopt ()</literal> directly.)
The <link linkend="gio-gnetworking.h"><literal><gio/gnetworking.h></literal></link>
header pulls in system headers that will define most of the
standard/portable socket options. For unusual socket protocols or
platform-dependent options, you may need to include additional
headers.
Note that even for socket options that are a single byte in size,
@value is still a pointer to a #gint variable, not a #guchar;
g_socket_get_option() will handle the conversion internally.
success or failure. On failure, @error will be set, and the system error value (<literal>errno</literal> or <literal>WSAGetLastError ()</literal>) will still be set to the result of the <literal>getsockopt ()</literal> call.
a #GSocket
the "API level" of the option (eg, <literal>SOL_SOCKET</literal>)
the "name" of the option (eg, <literal>SO_BROADCAST</literal>)
return location for the option value
Gets the socket protocol id the socket was created with.
In case the protocol is unknown, -1 is returned.
a protocol id, or -1 if unknown
a #GSocket.
Try to get the remove address of a connected socket. This is only
useful for connection oriented sockets that have been connected.
a #GSocketAddress or %NULL on error. Free the returned object with g_object_unref().
a #GSocket.
Gets the socket type of the socket.
a #GSocketType
a #GSocket.
Gets the timeout setting of the socket. For details on this, see
g_socket_set_timeout().
the timeout in seconds
a #GSocket.
Gets the unicast time-to-live setting on @socket; see
g_socket_set_ttl() for more details.
the time-to-live setting on @socket
a #GSocket.
Checks whether a socket is closed.
%TRUE if socket is closed, %FALSE otherwise
a #GSocket
Check whether the socket is connected. This is only useful for
connection-oriented sockets.
%TRUE if socket is connected, %FALSE otherwise.
a #GSocket.
Registers @socket to receive multicast messages sent to @group.
@socket must be a %G_SOCKET_TYPE_DATAGRAM socket, and must have
been bound to an appropriate interface and port with
g_socket_bind().
If @iface is %NULL, the system will automatically pick an interface
to bind to based on @group.
If @source_specific is %TRUE, source-specific multicast as defined
in RFC 4604 is used. Note that on older platforms this may fail
with a %G_IO_ERROR_NOT_SUPPORTED error.
%TRUE on success, %FALSE on error.
a #GSocket.
a #GInetAddress specifying the group address to join.
%TRUE if source-specific multicast should be used
Name of the interface to use, or %NULL
Removes @socket from the multicast group defined by @group, @iface,
and @source_specific (which must all have the same values they had
when you joined the group).
@socket remains bound to its address and port, and can still receive
unicast messages after calling this.
%TRUE on success, %FALSE on error.
a #GSocket.
a #GInetAddress specifying the group address to leave.
%TRUE if source-specific multicast was used
Interface used
Marks the socket as a server socket, i.e. a socket that is used
to accept incoming requests using g_socket_accept().
Before calling this the socket must be bound to a local address using
g_socket_bind().
To set the maximum amount of outstanding clients, use
g_socket_set_listen_backlog().
%TRUE on success, %FALSE on error.
a #GSocket.
Receive data (up to @size bytes) from a socket. This is mainly used by
connection-oriented sockets; it is identical to g_socket_receive_from()
with @address set to %NULL.
For %G_SOCKET_TYPE_DATAGRAM and %G_SOCKET_TYPE_SEQPACKET sockets,
g_socket_receive() will always read either 0 or 1 complete messages from
the socket. If the received message is too large to fit in @buffer, then
the data beyond @size bytes will be discarded, without any explicit
indication that this has occurred.
For %G_SOCKET_TYPE_STREAM sockets, g_socket_receive() can return any
number of bytes, up to @size. If more than @size bytes have been
received, the additional data will be returned in future calls to
g_socket_receive().
If the socket is in blocking mode the call will block until there
is some data to receive, the connection is closed, or there is an
error. If there is no data available and the socket is in
non-blocking mode, a %G_IO_ERROR_WOULD_BLOCK error will be
returned. To be notified when data is available, wait for the
%G_IO_IN condition.
On error -1 is returned and @error is set accordingly.
Number of bytes read, or 0 if the connection was closed by the peer, or -1 on error
a #GSocket
a buffer to read data into (which should be at least @size bytes long).
the number of bytes you want to read from the socket
a %GCancellable or %NULL
Receive data (up to @size bytes) from a socket.
If @address is non-%NULL then @address will be set equal to the
source address of the received packet.
@address is owned by the caller.
See g_socket_receive() for additional information.
Number of bytes read, or 0 if the connection was closed by the peer, or -1 on error
a #GSocket
a pointer to a #GSocketAddress pointer, or %NULL
a buffer to read data into (which should be at least @size bytes long).
the number of bytes you want to read from the socket
a %GCancellable or %NULL
Receive data from a socket. This is the most complicated and
fully-featured version of this call. For easier use, see
g_socket_receive() and g_socket_receive_from().
If @address is non-%NULL then @address will be set equal to the
source address of the received packet.
@address is owned by the caller.
@vector must point to an array of #GInputVector structs and
@num_vectors must be the length of this array. These structs
describe the buffers that received data will be scattered into.
If @num_vectors is -1, then @vectors is assumed to be terminated
by a #GInputVector with a %NULL buffer pointer.
As a special case, if @num_vectors is 0 (in which case, @vectors
may of course be %NULL), then a single byte is received and
discarded. This is to facilitate the common practice of sending a
single '\0' byte for the purposes of transferring ancillary data.
@messages, if non-%NULL, will be set to point to a newly-allocated
array of #GSocketControlMessage instances or %NULL if no such
messages was received. These correspond to the control messages
received from the kernel, one #GSocketControlMessage per message
from the kernel. This array is %NULL-terminated and must be freed
by the caller using g_free() after calling g_object_unref() on each
element. If @messages is %NULL, any control messages received will
be discarded.
@num_messages, if non-%NULL, will be set to the number of control
messages received.
If both @messages and @num_messages are non-%NULL, then
@num_messages gives the number of #GSocketControlMessage instances
in @messages (ie: not including the %NULL terminator).
@flags is an in/out parameter. The commonly available arguments
for this are available in the #GSocketMsgFlags enum, but the
values there are the same as the system values, and the flags
are passed in as-is, so you can pass in system-specific flags too
(and g_socket_receive_message() may pass system-specific flags out).
As with g_socket_receive(), data may be discarded if @socket is
%G_SOCKET_TYPE_DATAGRAM or %G_SOCKET_TYPE_SEQPACKET and you do not
provide enough buffer space to read a complete message. You can pass
%G_SOCKET_MSG_PEEK in @flags to peek at the current message without
removing it from the receive queue, but there is no portable way to find
out the length of the message other than by reading it into a
sufficiently-large buffer.
If the socket is in blocking mode the call will block until there
is some data to receive, the connection is closed, or there is an
error. If there is no data available and the socket is in
non-blocking mode, a %G_IO_ERROR_WOULD_BLOCK error will be
returned. To be notified when data is available, wait for the
%G_IO_IN condition.
On error -1 is returned and @error is set accordingly.
Number of bytes read, or 0 if the connection was closed by the peer, or -1 on error
a #GSocket
a pointer to a #GSocketAddress pointer, or %NULL
an array of #GInputVector structs
the number of elements in @vectors, or -1
a pointer which may be filled with an array of #GSocketControlMessages, or %NULL
a pointer which will be filled with the number of elements in @messages, or %NULL
a pointer to an int containing #GSocketMsgFlags flags
a %GCancellable or %NULL
This behaves exactly the same as g_socket_receive(), except that
the choice of blocking or non-blocking behavior is determined by
the @blocking argument rather than by @socket's properties.
Number of bytes read, or 0 if the connection was closed by the peer, or -1 on error
a #GSocket
a buffer to read data into (which should be at least @size bytes long).
the number of bytes you want to read from the socket
whether to do blocking or non-blocking I/O
a %GCancellable or %NULL
Tries to send @size bytes from @buffer on the socket. This is
mainly used by connection-oriented sockets; it is identical to
g_socket_send_to() with @address set to %NULL.
If the socket is in blocking mode the call will block until there is
space for the data in the socket queue. If there is no space available
and the socket is in non-blocking mode a %G_IO_ERROR_WOULD_BLOCK error
will be returned. To be notified when space is available, wait for the
%G_IO_OUT condition. Note though that you may still receive
%G_IO_ERROR_WOULD_BLOCK from g_socket_send() even if you were previously
notified of a %G_IO_OUT condition. (On Windows in particular, this is
very common due to the way the underlying APIs work.)
On error -1 is returned and @error is set accordingly.
Number of bytes written (which may be less than @size), or -1 on error
a #GSocket
the buffer containing the data to send.
the number of bytes to send
a %GCancellable or %NULL
Send data to @address on @socket. This is the most complicated and
fully-featured version of this call. For easier use, see
g_socket_send() and g_socket_send_to().
If @address is %NULL then the message is sent to the default receiver
(set by g_socket_connect()).
@vectors must point to an array of #GOutputVector structs and
@num_vectors must be the length of this array. (If @num_vectors is -1,
then @vectors is assumed to be terminated by a #GOutputVector with a
%NULL buffer pointer.) The #GOutputVector structs describe the buffers
that the sent data will be gathered from. Using multiple
#GOutputVector<!-- -->s is more memory-efficient than manually copying
data from multiple sources into a single buffer, and more
network-efficient than making multiple calls to g_socket_send().
@messages, if non-%NULL, is taken to point to an array of @num_messages
#GSocketControlMessage instances. These correspond to the control
messages to be sent on the socket.
If @num_messages is -1 then @messages is treated as a %NULL-terminated
array.
@flags modify how the message is sent. The commonly available arguments
for this are available in the #GSocketMsgFlags enum, but the
values there are the same as the system values, and the flags
are passed in as-is, so you can pass in system-specific flags too.
If the socket is in blocking mode the call will block until there is
space for the data in the socket queue. If there is no space available
and the socket is in non-blocking mode a %G_IO_ERROR_WOULD_BLOCK error
will be returned. To be notified when space is available, wait for the
%G_IO_OUT condition. Note though that you may still receive
%G_IO_ERROR_WOULD_BLOCK from g_socket_send() even if you were previously
notified of a %G_IO_OUT condition. (On Windows in particular, this is
very common due to the way the underlying APIs work.)
On error -1 is returned and @error is set accordingly.
Number of bytes written (which may be less than @size), or -1 on error
a #GSocket
a #GSocketAddress, or %NULL
an array of #GOutputVector structs
the number of elements in @vectors, or -1
a pointer to an array of #GSocketControlMessages, or %NULL.
number of elements in @messages, or -1.
an int containing #GSocketMsgFlags flags
a %GCancellable or %NULL
Tries to send @size bytes from @buffer to @address. If @address is
%NULL then the message is sent to the default receiver (set by
g_socket_connect()).
See g_socket_send() for additional information.
Number of bytes written (which may be less than @size), or -1 on error
a #GSocket
a #GSocketAddress, or %NULL
the buffer containing the data to send.
the number of bytes to send
a %GCancellable or %NULL
This behaves exactly the same as g_socket_send(), except that
the choice of blocking or non-blocking behavior is determined by
the @blocking argument rather than by @socket's properties.
Number of bytes written (which may be less than @size), or -1 on error
a #GSocket
the buffer containing the data to send.
the number of bytes to send
whether to do blocking or non-blocking I/O
a %GCancellable or %NULL
Sets the blocking mode of the socket. In blocking mode
all operations block until they succeed or there is an error. In
non-blocking mode all functions return results immediately or
with a %G_IO_ERROR_WOULD_BLOCK error.
All sockets are created in blocking mode. However, note that the
platform level socket is always non-blocking, and blocking mode
is a GSocket level feature.
a #GSocket.
Whether to use blocking I/O or not.
Sets whether @socket should allow sending to broadcast addresses.
This is %FALSE by default.
a #GSocket.
whether @socket should allow sending to broadcast addresses
Sets or unsets the %SO_KEEPALIVE flag on the underlying socket. When
this flag is set on a socket, the system will attempt to verify that the
remote socket endpoint is still present if a sufficiently long period of
time passes with no data being exchanged. If the system is unable to
verify the presence of the remote endpoint, it will automatically close
the connection.
This option is only functional on certain kinds of sockets. (Notably,
%G_SOCKET_PROTOCOL_TCP sockets.)
The exact time between pings is system- and protocol-dependent, but will
normally be at least two hours. Most commonly, you would set this flag
on a server socket if you want to allow clients to remain idle for long
periods of time, but also want to ensure that connections are eventually
garbage-collected if clients crash or become unreachable.
a #GSocket.
Value for the keepalive flag
Sets the maximum number of outstanding connections allowed
when listening on this socket. If more clients than this are
connecting to the socket and the application is not handling them
on time then the new connections will be refused.
Note that this must be called before g_socket_listen() and has no
effect if called after that.
a #GSocket.
the maximum number of pending connections.
Sets whether outgoing multicast packets will be received by sockets
listening on that multicast address on the same host. This is %TRUE
by default.
a #GSocket.
whether @socket should receive messages sent to its multicast groups from the local host
Sets the time-to-live for outgoing multicast datagrams on @socket.
By default, this is 1, meaning that multicast packets will not leave
the local network.
a #GSocket.
the time-to-live value for all multicast datagrams on @socket
Sets the value of an integer-valued option on @socket, as with
<literal>setsockopt ()</literal>. (If you need to set a
non-integer-valued option, you will need to call
<literal>setsockopt ()</literal> directly.)
The <link linkend="gio-gnetworking.h"><literal><gio/gnetworking.h></literal></link>
header pulls in system headers that will define most of the
standard/portable socket options. For unusual socket protocols or
platform-dependent options, you may need to include additional
headers.
success or failure. On failure, @error will be set, and the system error value (<literal>errno</literal> or <literal>WSAGetLastError ()</literal>) will still be set to the result of the <literal>setsockopt ()</literal> call.
a #GSocket
the "API level" of the option (eg, <literal>SOL_SOCKET</literal>)
the "name" of the option (eg, <literal>SO_BROADCAST</literal>)
the value to set the option to
Sets the time in seconds after which I/O operations on @socket will
time out if they have not yet completed.
On a blocking socket, this means that any blocking #GSocket
operation will time out after @timeout seconds of inactivity,
returning %G_IO_ERROR_TIMED_OUT.
On a non-blocking socket, calls to g_socket_condition_wait() will
also fail with %G_IO_ERROR_TIMED_OUT after the given time. Sources
created with g_socket_create_source() will trigger after
@timeout seconds of inactivity, with the requested condition
set, at which point calling g_socket_receive(), g_socket_send(),
g_socket_check_connect_result(), etc, will fail with
%G_IO_ERROR_TIMED_OUT.
If @timeout is 0 (the default), operations will never time out
on their own.
Note that if an I/O operation is interrupted by a signal, this may
cause the timeout to be reset.
a #GSocket.
the timeout for @socket, in seconds, or 0 for none
Sets the time-to-live for outgoing unicast packets on @socket.
By default the platform-specific default value is used.
a #GSocket.
the time-to-live value for all unicast packets on @socket
Shut down part of a full-duplex connection.
If @shutdown_read is %TRUE then the receiving side of the connection
is shut down, and further reading is disallowed.
If @shutdown_write is %TRUE then the sending side of the connection
is shut down, and further writing is disallowed.
It is allowed for both @shutdown_read and @shutdown_write to be %TRUE.
One example where this is used is graceful disconnect for TCP connections
where you close the sending side, then wait for the other side to close
the connection, thus ensuring that the other side saw all sent data.
%TRUE on success, %FALSE on error
a #GSocket
whether to shut down the read side
whether to shut down the write side
Checks if a socket is capable of speaking IPv4.
IPv4 sockets are capable of speaking IPv4. On some operating systems
and under some combinations of circumstances IPv6 sockets are also
capable of speaking IPv4. See RFC 3493 section 3.7 for more
information.
No other types of sockets are currently considered as being capable
of speaking IPv4.
%TRUE if this socket can be used with IPv4.
a #GSocket
Whether the socket should allow sending to broadcast addresses.
Whether outgoing multicast packets loop back to the local host.
Time-to-live out outgoing multicast packets
The timeout in seconds on socket I/O
Time-to-live for outgoing unicast packets
#GSocketAddress is the equivalent of <type>struct sockaddr</type>
in the BSD sockets API. This is an abstract class; use
#GInetSocketAddress for internet sockets, or #GUnixSocketAddress
for UNIX domain sockets.
Creates a #GSocketAddress subclass corresponding to the native
<type>struct sockaddr</type> @native.
a new #GSocketAddress if @native could successfully be converted, otherwise %NULL.
a pointer to a <type>struct sockaddr</type>
the size of the memory location pointed to by @native
Gets the socket family type of @address.
the socket family type of @address.
Gets the size of @address's native <type>struct sockaddr</type>.
You can use this to allocate memory to pass to
g_socket_address_to_native().
the size of the native <type>struct sockaddr</type> that @address represents
Converts a #GSocketAddress to a native <type>struct
sockaddr</type>, which can be passed to low-level functions like
connect() or bind().
If not enough space is available, a %G_IO_ERROR_NO_SPACE error is
returned. If the address type is not known on the system
then a %G_IO_ERROR_NOT_SUPPORTED error is returned.
%TRUE if @dest was filled in, %FALSE on error
a pointer to a memory location that will contain the native <type>struct sockaddr</type>.
the size of @dest. Must be at least as large as g_socket_address_get_native_size().
Gets the socket family type of @address.
the socket family type of @address.
a #GSocketAddress
Gets the size of @address's native <type>struct sockaddr</type>.
You can use this to allocate memory to pass to
g_socket_address_to_native().
the size of the native <type>struct sockaddr</type> that @address represents
a #GSocketAddress
Converts a #GSocketAddress to a native <type>struct
sockaddr</type>, which can be passed to low-level functions like
connect() or bind().
If not enough space is available, a %G_IO_ERROR_NO_SPACE error is
returned. If the address type is not known on the system
then a %G_IO_ERROR_NOT_SUPPORTED error is returned.
%TRUE if @dest was filled in, %FALSE on error
a #GSocketAddress
a pointer to a memory location that will contain the native <type>struct sockaddr</type>.
the size of @dest. Must be at least as large as g_socket_address_get_native_size().
the socket family type of @address.
the size of the native <type>struct sockaddr</type> that @address represents
%TRUE if @dest was filled in, %FALSE on error
a pointer to a memory location that will contain the native <type>struct sockaddr</type>.
the size of @dest. Must be at least as large as g_socket_address_get_native_size().
Enumerator type for objects that contain or generate
#GSocketAddress<!-- -->es.
Retrieves the next #GSocketAddress from @enumerator. Note that this
may block for some amount of time. (Eg, a #GNetworkAddress may need
to do a DNS lookup before it can return an address.) Use
g_socket_address_enumerator_next_async() if you need to avoid
blocking.
If @enumerator is expected to yield addresses, but for some reason
is unable to (eg, because of a DNS error), then the first call to
g_socket_address_enumerator_next() will return an appropriate error
in *@error. However, if the first call to
g_socket_address_enumerator_next() succeeds, then any further
internal errors (other than @cancellable being triggered) will be
ignored.
a #GSocketAddress (owned by the caller), or %NULL on error (in which case *@error will be set) or if there are no more addresses.
optional #GCancellable object, %NULL to ignore.
Asynchronously retrieves the next #GSocketAddress from @enumerator
and then calls @callback, which must call
g_socket_address_enumerator_next_finish() to get the result.
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
Retrieves the result of a completed call to
g_socket_address_enumerator_next_async(). See
g_socket_address_enumerator_next() for more information about
error handling.
a #GSocketAddress (owned by the caller), or %NULL on error (in which case *@error will be set) or if there are no more addresses.
a #GAsyncResult
Retrieves the next #GSocketAddress from @enumerator. Note that this
may block for some amount of time. (Eg, a #GNetworkAddress may need
to do a DNS lookup before it can return an address.) Use
g_socket_address_enumerator_next_async() if you need to avoid
blocking.
If @enumerator is expected to yield addresses, but for some reason
is unable to (eg, because of a DNS error), then the first call to
g_socket_address_enumerator_next() will return an appropriate error
in *@error. However, if the first call to
g_socket_address_enumerator_next() succeeds, then any further
internal errors (other than @cancellable being triggered) will be
ignored.
a #GSocketAddress (owned by the caller), or %NULL on error (in which case *@error will be set) or if there are no more addresses.
a #GSocketAddressEnumerator
optional #GCancellable object, %NULL to ignore.
Asynchronously retrieves the next #GSocketAddress from @enumerator
and then calls @callback, which must call
g_socket_address_enumerator_next_finish() to get the result.
a #GSocketAddressEnumerator
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
Retrieves the result of a completed call to
g_socket_address_enumerator_next_async(). See
g_socket_address_enumerator_next() for more information about
error handling.
a #GSocketAddress (owned by the caller), or %NULL on error (in which case *@error will be set) or if there are no more addresses.
a #GSocketAddressEnumerator
a #GAsyncResult
a #GSocketAddress (owned by the caller), or %NULL on error (in which case *@error will be set) or if there are no more addresses.
optional #GCancellable object, %NULL to ignore.
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback to call when the request is satisfied
the data to pass to callback function
a #GSocketAddress (owned by the caller), or %NULL on error (in which case *@error will be set) or if there are no more addresses.
a #GAsyncResult
#GSocketClient is a lightweight high-level utility class for connecting to
a network host using a connection oriented socket type.
You create a #GSocketClient object, set any options you want, and then
call a sync or async connect operation, which returns a #GSocketConnection
subclass on success.
The type of the #GSocketConnection object returned depends on the type of
the underlying socket that is in use. For instance, for a TCP/IP connection
it will be a #GTcpConnection.
As #GSocketClient is a lightweight object, you don't need to cache it. You
can just create a new one any time you need one.
Creates a new #GSocketClient with the default options.
a #GSocketClient. Free the returned object with g_object_unref().
Enable proxy protocols to be handled by the application. When the
indicated proxy protocol is returned by the #GProxyResolver,
#GSocketClient will consider this protocol as supported but will
not try to find a #GProxy instance to handle handshaking. The
application must check for this case by calling
g_socket_connection_get_remote_address() on the returned
#GSocketConnection, and seeing if it's a #GProxyAddress of the
appropriate type, to determine whether or not it needs to handle
the proxy handshaking itself.
This should be used for proxy protocols that are dialects of
another protocol such as HTTP proxy. It also allows cohabitation of
proxy protocols that are reused between protocols. A good example
is HTTP. It can be used to proxy HTTP, FTP and Gopher and can also
be use as generic socket proxy through the HTTP CONNECT method.
When the proxy is detected as being an application proxy, TLS handshake
will be skipped. This is required to let the application do the proxy
specific handshake.
a #GSocketClient
The proxy protocol
Tries to resolve the @connectable and make a network connection to it.
Upon a successful connection, a new #GSocketConnection is constructed
and returned. The caller owns this new object and must drop their
reference to it when finished with it.
The type of the #GSocketConnection object returned depends on the type of
the underlying socket that is used. For instance, for a TCP/IP connection
it will be a #GTcpConnection.
The socket created will be the same family as the address that the
@connectable resolves to, unless family is set with g_socket_client_set_family()
or indirectly via g_socket_client_set_local_address(). The socket type
defaults to %G_SOCKET_TYPE_STREAM but can be set with
g_socket_client_set_socket_type().
If a local address is specified with g_socket_client_set_local_address() the
socket will be bound to this address before connecting.
a #GSocketConnection on success, %NULL on error.
a #GSocketClient.
a #GSocketConnectable specifying the remote address.
optional #GCancellable object, %NULL to ignore.
This is the asynchronous version of g_socket_client_connect().
When the operation is finished @callback will be
called. You can then call g_socket_client_connect_finish() to get
the result of the operation.
a #GSocketClient
a #GSocketConnectable specifying the remote address.
a #GCancellable, or %NULL
a #GAsyncReadyCallback
user data for the callback
Finishes an async connect operation. See g_socket_client_connect_async()
a #GSocketConnection on success, %NULL on error.
a #GSocketClient.
a #GAsyncResult.
This is a helper function for g_socket_client_connect().
Attempts to create a TCP connection to the named host.
@host_and_port may be in any of a number of recognized formats; an IPv6
address, an IPv4 address, or a domain name (in which case a DNS
lookup is performed). Quoting with [] is supported for all address
types. A port override may be specified in the usual way with a
colon. Ports may be given as decimal numbers or symbolic names (in
which case an /etc/services lookup is performed).
If no port override is given in @host_and_port then @default_port will be
used as the port number to connect to.
In general, @host_and_port is expected to be provided by the user (allowing
them to give the hostname, and a port override if necessary) and
@default_port is expected to be provided by the application.
In the case that an IP address is given, a single connection
attempt is made. In the case that a name is given, multiple
connection attempts may be made, in turn and according to the
number of address records in DNS, until a connection succeeds.
Upon a successful connection, a new #GSocketConnection is constructed
and returned. The caller owns this new object and must drop their
reference to it when finished with it.
In the event of any failure (DNS error, service not found, no hosts
connectable) %NULL is returned and @error (if non-%NULL) is set
accordingly.
a #GSocketConnection on success, %NULL on error.
a #GSocketClient
the name and optionally port of the host to connect to
the default port to connect to
a #GCancellable, or %NULL
This is the asynchronous version of g_socket_client_connect_to_host().
When the operation is finished @callback will be
called. You can then call g_socket_client_connect_to_host_finish() to get
the result of the operation.
a #GSocketClient
the name and optionally the port of the host to connect to
the default port to connect to
a #GCancellable, or %NULL
a #GAsyncReadyCallback
user data for the callback
Finishes an async connect operation. See g_socket_client_connect_to_host_async()
a #GSocketConnection on success, %NULL on error.
a #GSocketClient.
a #GAsyncResult.
Attempts to create a TCP connection to a service.
This call looks up the SRV record for @service at @domain for the
"tcp" protocol. It then attempts to connect, in turn, to each of
the hosts providing the service until either a connection succeeds
or there are no hosts remaining.
Upon a successful connection, a new #GSocketConnection is constructed
and returned. The caller owns this new object and must drop their
reference to it when finished with it.
In the event of any failure (DNS error, service not found, no hosts
connectable) %NULL is returned and @error (if non-%NULL) is set
accordingly.
a #GSocketConnection if successful, or %NULL on error
a #GSocketConnection
a domain name
the name of the service to connect to
a #GCancellable, or %NULL
This is the asynchronous version of
g_socket_client_connect_to_service().
a #GSocketClient
a domain name
the name of the service to connect to
a #GCancellable, or %NULL
a #GAsyncReadyCallback
user data for the callback
Finishes an async connect operation. See g_socket_client_connect_to_service_async()
a #GSocketConnection on success, %NULL on error.
a #GSocketClient.
a #GAsyncResult.
This is a helper function for g_socket_client_connect().
Attempts to create a TCP connection with a network URI.
@uri may be any valid URI containing an "authority" (hostname/port)
component. If a port is not specified in the URI, @default_port
will be used. TLS will be negotiated if #GSocketClient:tls is %TRUE.
(#GSocketClient does not know to automatically assume TLS for
certain URI schemes.)
Using this rather than g_socket_client_connect() or
g_socket_client_connect_to_host() allows #GSocketClient to
determine when to use application-specific proxy protocols.
Upon a successful connection, a new #GSocketConnection is constructed
and returned. The caller owns this new object and must drop their
reference to it when finished with it.
In the event of any failure (DNS error, service not found, no hosts
connectable) %NULL is returned and @error (if non-%NULL) is set
accordingly.
a #GSocketConnection on success, %NULL on error.
a #GSocketClient
A network URI
the default port to connect to
a #GCancellable, or %NULL
This is the asynchronous version of g_socket_client_connect_to_uri().
When the operation is finished @callback will be
called. You can then call g_socket_client_connect_to_uri_finish() to get
the result of the operation.
a #GSocketClient
a network uri
the default port to connect to
a #GCancellable, or %NULL
a #GAsyncReadyCallback
user data for the callback
Finishes an async connect operation. See g_socket_client_connect_to_uri_async()
a #GSocketConnection on success, %NULL on error.
a #GSocketClient.
a #GAsyncResult.
Gets the proxy enable state; see g_socket_client_set_enable_proxy()
whether proxying is enabled
a #GSocketClient.
Gets the socket family of the socket client.
See g_socket_client_set_family() for details.
a #GSocketFamily
a #GSocketClient.
Gets the local address of the socket client.
See g_socket_client_set_local_address() for details.
a #GSocketAddress or %NULL. Do not free.
a #GSocketClient.
Gets the protocol name type of the socket client.
See g_socket_client_set_protocol() for details.
a #GSocketProtocol
a #GSocketClient
Gets the #GProxyResolver being used by @client. Normally, this will
be the resolver returned by g_proxy_resolver_get_default(), but you
can override it with g_socket_client_set_proxy_resolver().
The #GProxyResolver being used by @client.
a #GSocketClient.
Gets the socket type of the socket client.
See g_socket_client_set_socket_type() for details.
a #GSocketFamily
a #GSocketClient.
Gets the I/O timeout time for sockets created by @client.
See g_socket_client_set_timeout() for details.
the timeout in seconds
a #GSocketClient
Gets whether @client creates TLS connections. See
g_socket_client_set_tls() for details.
whether @client uses TLS
a #GSocketClient.
Gets the TLS validation flags used creating TLS connections via
@client.
the TLS validation flags
a #GSocketClient.
Sets whether or not @client attempts to make connections via a
proxy server. When enabled (the default), #GSocketClient will use a
#GProxyResolver to determine if a proxy protocol such as SOCKS is
needed, and automatically do the necessary proxy negotiation.
See also g_socket_client_set_proxy_resolver().
a #GSocketClient.
whether to enable proxies
Sets the socket family of the socket client.
If this is set to something other than %G_SOCKET_FAMILY_INVALID
then the sockets created by this object will be of the specified
family.
This might be useful for instance if you want to force the local
connection to be an ipv4 socket, even though the address might
be an ipv6 mapped to ipv4 address.
a #GSocketClient.
a #GSocketFamily
Sets the local address of the socket client.
The sockets created by this object will bound to the
specified address (if not %NULL) before connecting.
This is useful if you want to ensure that the local
side of the connection is on a specific port, or on
a specific interface.
a #GSocketClient.
a #GSocketAddress, or %NULL
Sets the protocol of the socket client.
The sockets created by this object will use of the specified
protocol.
If @protocol is %0 that means to use the default
protocol for the socket family and type.
a #GSocketClient.
a #GSocketProtocol
Overrides the #GProxyResolver used by @client. You can call this if
you want to use specific proxies, rather than using the system
default proxy settings.
Note that whether or not the proxy resolver is actually used
depends on the setting of #GSocketClient:enable-proxy, which is not
changed by this function (but which is %TRUE by default)
a #GSocketClient.
a #GProxyResolver, or %NULL for the default.
Sets the socket type of the socket client.
The sockets created by this object will be of the specified
type.
It doesn't make sense to specify a type of %G_SOCKET_TYPE_DATAGRAM,
as GSocketClient is used for connection oriented services.
a #GSocketClient.
a #GSocketType
Sets the I/O timeout for sockets created by @client. @timeout is a
time in seconds, or 0 for no timeout (the default).
The timeout value affects the initial connection attempt as well,
so setting this may cause calls to g_socket_client_connect(), etc,
to fail with %G_IO_ERROR_TIMED_OUT.
a #GSocketClient.
the timeout
Sets whether @client creates TLS (aka SSL) connections. If @tls is
%TRUE, @client will wrap its connections in a #GTlsClientConnection
and perform a TLS handshake when connecting.
Note that since #GSocketClient must return a #GSocketConnection,
but #GTlsClientConnection is not a #GSocketConnection, this
actually wraps the resulting #GTlsClientConnection in a
#GTcpWrapperConnection when returning it. You can use
g_tcp_wrapper_connection_get_base_io_stream() on the return value
to extract the #GTlsClientConnection.
If you need to modify the behavior of the TLS handshake (eg, by
setting a client-side certificate to use, or connecting to the
#GTlsConnection::accept-certificate signal), you can connect to
@client's #GSocketClient::event signal and wait for it to be
emitted with %G_SOCKET_CLIENT_TLS_HANDSHAKING, which will give you
a chance to see the #GTlsClientConnection before the handshake
starts.
a #GSocketClient.
whether to use TLS
Sets the TLS validation flags used when creating TLS connections
via @client. The default value is %G_TLS_CERTIFICATE_VALIDATE_ALL.
a #GSocketClient.
the validation flags
The proxy resolver to use
Emitted when @client's activity on @connectable changes state.
Among other things, this can be used to provide progress
information about a network connection in the UI. The meanings of
the different @event values are as follows:
<variablelist>
<varlistentry>
<term>%G_SOCKET_CLIENT_RESOLVING:</term>
<listitem><para>
@client is about to look up @connectable in DNS.
@connection will be %NULL.
</para></listitem>
</varlistentry>
<varlistentry>
<term>%G_SOCKET_CLIENT_RESOLVED:</term>
<listitem><para>
@client has successfully resolved @connectable in DNS.
@connection will be %NULL.
</para></listitem>
</varlistentry>
<varlistentry>
<term>%G_SOCKET_CLIENT_CONNECTING:</term>
<listitem><para>
@client is about to make a connection to a remote host;
either a proxy server or the destination server itself.
@connection is the #GSocketConnection, which is not yet
connected.
</para></listitem>
</varlistentry>
<varlistentry>
<term>%G_SOCKET_CLIENT_CONNECTED:</term>
<listitem><para>
@client has successfully connected to a remote host.
@connection is the connected #GSocketConnection.
</para></listitem>
</varlistentry>
<varlistentry>
<term>%G_SOCKET_CLIENT_PROXY_NEGOTIATING:</term>
<listitem><para>
@client is about to negotiate with a proxy to get it to
connect to @connectable. @connection is the
#GSocketConnection to the proxy server.
</para></listitem>
</varlistentry>
<varlistentry>
<term>%G_SOCKET_CLIENT_PROXY_NEGOTIATED:</term>
<listitem><para>
@client has negotiated a connection to @connectable through
a proxy server. @connection is the stream returned from
g_proxy_connect(), which may or may not be a
#GSocketConnection.
</para></listitem>
</varlistentry>
<varlistentry>
<term>%G_SOCKET_CLIENT_TLS_HANDSHAKING:</term>
<listitem><para>
@client is about to begin a TLS handshake. @connection is a
#GTlsClientConnection.
</para></listitem>
</varlistentry>
<varlistentry>
<term>%G_SOCKET_CLIENT_TLS_HANDSHAKED:</term>
<listitem><para>
@client has successfully completed the TLS handshake.
@connection is a #GTlsClientConnection.
</para></listitem>
</varlistentry>
<varlistentry>
<term>%G_SOCKET_CLIENT_COMPLETE:</term>
<listitem><para>
@client has either successfully connected to @connectable
(in which case @connection is the #GSocketConnection that
it will be returning to the caller) or has failed (in which
case @connection is %NULL and the client is about to return
an error).
</para></listitem>
</varlistentry>
</variablelist>
Each event except %G_SOCKET_CLIENT_COMPLETE may be emitted
multiple times (or not at all) for a given connectable (in
particular, if @client ends up attempting to connect to more than
one address). However, if @client emits the #GSocketClient::event
signal at all for a given connectable, that it will always emit
it with %G_SOCKET_CLIENT_COMPLETE when it is done.
Note that there may be additional #GSocketClientEvent values in
the future; unrecognized @event values should be ignored.
the event that is occurring
the #GSocketConnectable that @event is occurring on
the current representation of the connection
Describes an event occurring on a #GSocketClient. See the
#GSocketClient::event signal for more details.
Additional values may be added to this type in the future.
The client is doing a DNS lookup.
The client has completed a DNS lookup.
The client is connecting to a remote host (either a proxy or the destination server).
The client has connected to a remote host.
The client is negotiating with a proxy to connect to the destination server.
The client has negotiated with the proxy server.
The client is performing a TLS handshake.
The client has performed a TLS handshake.
The client is done with a particular #GSocketConnectable.
Objects that describe one or more potential socket endpoints
implement #GSocketConnectable. Callers can then use
g_socket_connectable_enumerate() to get a #GSocketAddressEnumerator
to try out each socket address in turn until one succeeds, as shown
in the sample code below.
|[
MyConnectionType *
connect_to_host (const char *hostname,
guint16 port,
GCancellable *cancellable,
GError **error)
{
MyConnection *conn = NULL;
GSocketConnectable *addr;
GSocketAddressEnumerator *enumerator;
GSocketAddress *sockaddr;
GError *conn_error = NULL;
addr = g_network_address_new (hostname, port);
enumerator = g_socket_connectable_enumerate (addr);
g_object_unref (addr);
/<!-- -->* Try each sockaddr until we succeed. Record the first
* connection error, but not any further ones (since they'll probably
* be basically the same as the first).
*<!-- -->/
while (!conn && (sockaddr = g_socket_address_enumerator_next (enumerator, cancellable, error))
{
conn = connect_to_sockaddr (sockaddr, conn_error ? NULL : &conn_error);
g_object_unref (sockaddr);
}
g_object_unref (enumerator);
if (conn)
{
if (conn_error)
{
/<!-- -->* We couldn't connect to the first address, but we succeeded
* in connecting to a later address.
*<!-- -->/
g_error_free (conn_error);
}
return conn;
}
else if (error)
{
/<!-- -->* Either the initial lookup failed, or else the caller
* cancelled us.
*<!-- -->/
if (conn_error)
g_error_free (conn_error);
return NULL;
}
else
{
g_error_propagate (error, conn_error);
return NULL;
}
}
]|
Creates a #GSocketAddressEnumerator for @connectable.
a new #GSocketAddressEnumerator.
Creates a #GSocketAddressEnumerator for @connectable that will
return #GProxyAddress<!-- -->es for addresses that you must connect
to via a proxy.
If @connectable does not implement
g_socket_connectable_proxy_enumerate(), this will fall back to
calling g_socket_connectable_enumerate().
a new #GSocketAddressEnumerator.
Creates a #GSocketAddressEnumerator for @connectable.
a new #GSocketAddressEnumerator.
a #GSocketConnectable
Creates a #GSocketAddressEnumerator for @connectable that will
return #GProxyAddress<!-- -->es for addresses that you must connect
to via a proxy.
If @connectable does not implement
g_socket_connectable_proxy_enumerate(), this will fall back to
calling g_socket_connectable_enumerate().
a new #GSocketAddressEnumerator.
a #GSocketConnectable
Provides an interface for returning a #GSocketAddressEnumerator
and #GProxyAddressEnumerator
a new #GSocketAddressEnumerator.
a new #GSocketAddressEnumerator.
#GSocketConnection is a #GIOStream for a connected socket. They
can be created either by #GSocketClient when connecting to a host,
or by #GSocketListener when accepting a new client.
The type of the #GSocketConnection object returned from these calls
depends on the type of the underlying socket that is in use. For
instance, for a TCP/IP connection it will be a #GTcpConnection.
Choosing what type of object to construct is done with the socket
connection factory, and it is possible for 3rd parties to register
custom socket connection types for specific combination of socket
family/type/protocol using g_socket_connection_factory_register_type().
Looks up the #GType to be used when creating socket connections on
sockets with the specified @family, @type and @protocol_id.
If no type is registered, the #GSocketConnection base type is returned.
a #GType
a #GSocketFamily
a #GSocketType
a protocol id
Looks up the #GType to be used when creating socket connections on
sockets with the specified @family, @type and @protocol.
If no type is registered, the #GSocketConnection base type is returned.
a #GType, inheriting from %G_TYPE_SOCKET_CONNECTION
a #GSocketFamily
a #GSocketType
a protocol id
Connect @connection to the specified remote address.
%TRUE if the connection succeeded, %FALSE on error
a #GSocketConnection
a #GSocketAddress specifying the remote address.
a %GCancellable or %NULL
Asynchronously connect @connection to the specified remote address.
This clears the #GSocket:blocking flag on @connection's underlying
socket if it is currently set.
Use g_socket_connection_connect_finish() to retrieve the result.
a #GSocketConnection
a #GSocketAddress specifying the remote address.
a %GCancellable or %NULL
a #GAsyncReadyCallback
user data for the callback
Gets the result of a g_socket_connection_connect_async() call.
%TRUE if the connection succeeded, %FALSE on error
a #GSocketConnection
the #GAsyncResult
Try to get the local address of a socket connection.
a #GSocketAddress or %NULL on error. Free the returned object with g_object_unref().
a #GSocketConnection
Try to get the remote address of a socket connection.
a #GSocketAddress or %NULL on error. Free the returned object with g_object_unref().
a #GSocketConnection
Gets the underlying #GSocket object of the connection.
This can be useful if you want to do something unusual on it
not supported by the #GSocketConnection APIs.
a #GSocketAddress or %NULL on error.
a #GSocketConnection
Checks if @connection is connected. This is equivalent to calling
g_socket_is_connected() on @connection's underlying #GSocket.
whether @connection is connected
a #GSocketConnection
A #GSocketControlMessage is a special-purpose utility message that
can be sent to or received from a #GSocket. These types of
messages are often called "ancillary data".
The message can represent some sort of special instruction to or
information from the socket or can represent a special kind of
transfer to the peer (for example, sending a file description over
a UNIX socket).
These messages are sent with g_socket_send_message() and received
with g_socket_receive_message().
To extend the set of control message that can be sent, subclass this
class and override the get_size, get_level, get_type and serialize
methods.
To extend the set of control messages that can be received, subclass
this class and implement the deserialize method. Also, make sure your
class is registered with the GType typesystem before calling
g_socket_receive_message() to read such a message.
Tries to deserialize a socket control message of a given
@level and @type. This will ask all known (to GType) subclasses
of #GSocketControlMessage if they can understand this kind
of message and if so deserialize it into a #GSocketControlMessage.
If there is no implementation for this kind of control message, %NULL
will be returned.
the deserialized message or %NULL
a socket level
a socket control message type for the given @level
the size of the data in bytes
pointer to the message data
Returns the "level" (i.e. the originating protocol) of the control message.
This is often SOL_SOCKET.
an integer describing the level
Returns the space required for the control message, not including
headers or alignment.
The number of bytes required.
Converts the data in the message to bytes placed in the
message.
@data is guaranteed to have enough space to fit the size
returned by g_socket_control_message_get_size() on this
object.
A buffer to write data to
Returns the "level" (i.e. the originating protocol) of the control message.
This is often SOL_SOCKET.
an integer describing the level
a #GSocketControlMessage
Returns the protocol specific type of the control message.
For instance, for UNIX fd passing this would be SCM_RIGHTS.
an integer describing the type of control message
a #GSocketControlMessage
Returns the space required for the control message, not including
headers or alignment.
The number of bytes required.
a #GSocketControlMessage
Converts the data in the message to bytes placed in the
message.
@data is guaranteed to have enough space to fit the size
returned by g_socket_control_message_get_size() on this
object.
a #GSocketControlMessage
A buffer to write data to
The number of bytes required.
an integer describing the level
A buffer to write data to
The protocol family of a #GSocketAddress. (These values are
identical to the system defines %AF_INET, %AF_INET6 and %AF_UNIX,
if available.)
no address family
the UNIX domain family
the IPv4 family
the IPv6 family
A #GSocketListener is an object that keeps track of a set
of server sockets and helps you accept sockets from any of the
socket, either sync or async.
If you want to implement a network server, also look at #GSocketService
and #GThreadedSocketService which are subclass of #GSocketListener
that makes this even easier.
Creates a new #GSocketListener with no sockets to listen for.
New listeners can be added with e.g. g_socket_listener_add_address()
or g_socket_listener_add_inet_port().
a new #GSocketListener.
Blocks waiting for a client to connect to any of the sockets added
to the listener. Returns a #GSocketConnection for the socket that was
accepted.
If @source_object is not %NULL it will be filled out with the source
object specified when the corresponding socket or address was added
to the listener.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
a #GSocketConnection on success, %NULL on error.
a #GSocketListener
location where #GObject pointer will be stored, or %NULL
optional #GCancellable object, %NULL to ignore.
This is the asynchronous version of g_socket_listener_accept().
When the operation is finished @callback will be
called. You can then call g_socket_listener_accept_socket()
to get the result of the operation.
a #GSocketListener
a #GCancellable, or %NULL
a #GAsyncReadyCallback
user data for the callback
Finishes an async accept operation. See g_socket_listener_accept_async()
a #GSocketConnection on success, %NULL on error.
a #GSocketListener
a #GAsyncResult.
Optional #GObject identifying this source
Blocks waiting for a client to connect to any of the sockets added
to the listener. Returns the #GSocket that was accepted.
If you want to accept the high-level #GSocketConnection, not a #GSocket,
which is often the case, then you should use g_socket_listener_accept()
instead.
If @source_object is not %NULL it will be filled out with the source
object specified when the corresponding socket or address was added
to the listener.
If @cancellable is not %NULL, then the operation can be cancelled by
triggering the cancellable object from another thread. If the operation
was cancelled, the error %G_IO_ERROR_CANCELLED will be returned.
a #GSocket on success, %NULL on error.
a #GSocketListener
location where #GObject pointer will be stored, or %NULL.
optional #GCancellable object, %NULL to ignore.
This is the asynchronous version of g_socket_listener_accept_socket().
When the operation is finished @callback will be
called. You can then call g_socket_listener_accept_socket_finish()
to get the result of the operation.
a #GSocketListener
a #GCancellable, or %NULL
a #GAsyncReadyCallback
user data for the callback
Finishes an async accept operation. See g_socket_listener_accept_socket_async()
a #GSocket on success, %NULL on error.
a #GSocketListener
a #GAsyncResult.
Optional #GObject identifying this source
Creates a socket of type @type and protocol @protocol, binds
it to @address and adds it to the set of sockets we're accepting
sockets from.
Note that adding an IPv6 address, depending on the platform,
may or may not result in a listener that also accepts IPv4
connections. For more deterministic behavior, see
g_socket_listener_add_inet_port().
@source_object will be passed out in the various calls
to accept to identify this particular source, which is
useful if you're listening on multiple addresses and do
different things depending on what address is connected to.
If successful and @effective_address is non-%NULL then it will
be set to the address that the binding actually occurred at. This
is helpful for determining the port number that was used for when
requesting a binding to port 0 (ie: "any port"). This address, if
requested, belongs to the caller and must be freed.
%TRUE on success, %FALSE on error.
a #GSocketListener
a #GSocketAddress
a #GSocketType
a #GSocketProtocol
Optional #GObject identifying this source
location to store the address that was bound to, or %NULL.
Listens for TCP connections on any available port number for both
IPv6 and IPv4 (if each is available).
This is useful if you need to have a socket for incoming connections
but don't care about the specific port number.
@source_object will be passed out in the various calls
to accept to identify this particular source, which is
useful if you're listening on multiple addresses and do
different things depending on what address is connected to.
the port number, or 0 in case of failure.
a #GSocketListener
Optional #GObject identifying this source
Helper function for g_socket_listener_add_address() that
creates a TCP/IP socket listening on IPv4 and IPv6 (if
supported) on the specified port on all interfaces.
@source_object will be passed out in the various calls
to accept to identify this particular source, which is
useful if you're listening on multiple addresses and do
different things depending on what address is connected to.
%TRUE on success, %FALSE on error.
a #GSocketListener
an IP port number (non-zero)
Optional #GObject identifying this source
Adds @socket to the set of sockets that we try to accept
new clients from. The socket must be bound to a local
address and listened to.
@source_object will be passed out in the various calls
to accept to identify this particular source, which is
useful if you're listening on multiple addresses and do
different things depending on what address is connected to.
%TRUE on success, %FALSE on error.
a #GSocketListener
a listening #GSocket
Optional #GObject identifying this source
Closes all the sockets in the listener.
a #GSocketListener
Sets the listen backlog on the sockets in the listener.
See g_socket_set_listen_backlog() for details
a #GSocketListener
an integer
Flags used in g_socket_receive_message() and g_socket_send_message().
The flags listed in the enum are some commonly available flags, but the
values used for them are the same as on the platform, and any other flags
are passed in/out as is. So to use a platform specific flag, just include
the right system header and pass in the flag.
No flags.
Request to send/receive out of band data.
Read data from the socket without removing it from the queue.
Don't use a gateway to send out the packet, only send to hosts on directly connected networks.
A protocol identifier is specified when creating a #GSocket, which is a
family/type specific identifier, where 0 means the default protocol for
the particular family/type.
This enum contains a set of commonly available and used protocols. You
can also pass any other identifiers handled by the platform in order to
use protocols not listed here.
The protocol type is unknown
The default protocol for the family/type
TCP over IP
UDP over IP
SCTP over IP
A #GSocketService is an object that represents a service that
is provided to the network or over local sockets. When a new
connection is made to the service the #GSocketService::incoming
signal is emitted.
A #GSocketService is a subclass of #GSocketListener and you need
to add the addresses you want to accept connections on with the
#GSocketListener APIs.
There are two options for implementing a network service based on
#GSocketService. The first is to create the service using
g_socket_service_new() and to connect to the #GSocketService::incoming
signal. The second is to subclass #GSocketService and override the
default signal handler implementation.
In either case, the handler must immediately return, or else it
will block additional incoming connections from being serviced.
If you are interested in writing connection handlers that contain
blocking code then see #GThreadedSocketService.
The socket service runs on the main loop of the <link
linkend="g-main-context-push-thread-default-context">thread-default
context</link> of the thread it is created in, and is not
threadsafe in general. However, the calls to start and stop the
service are thread-safe so these can be used from threads that
handle incoming clients.
Creates a new #GSocketService with no sockets to listen for.
New listeners can be added with e.g. g_socket_listener_add_address()
or g_socket_listener_add_inet_port().
a new #GSocketService.
Check whether the service is active or not. An active
service will accept new clients that connect, while
a non-active service will let connecting clients queue
up until the service is started.
%TRUE if the service is active, %FALSE otherwise
a #GSocketService
Starts the service, i.e. start accepting connections
from the added sockets when the mainloop runs.
This call is thread-safe, so it may be called from a thread
handling an incoming client request.
a #GSocketService
Stops the service, i.e. stops accepting connections
from the added sockets when the mainloop runs.
This call is thread-safe, so it may be called from a thread
handling an incoming client request.
a #GSocketService
The ::incoming signal is emitted when a new incoming connection
to @service needs to be handled. The handler must initiate the
handling of @connection, but may not block; in essence,
asynchronous operations must be used.
@connection will be unreffed once the signal handler returns,
so you need to ref it yourself if you are planning to use it.
%TRUE to stop other handlers from being called
a new #GSocketConnection object
the source_object passed to g_socket_listener_add_address()
This is the function type of the callback used for the #GSource
returned by g_socket_create_source().
it should return %FALSE if the source should be removed.
the #GSocket
the current condition at the source fired.
data passed in by the user.
Flags used when creating a #GSocket. Some protocols may not implement
all the socket types.
Type unknown or wrong
Reliable connection-based byte streams (e.g. TCP).
Connectionless, unreliable datagram passing. (e.g. UDP)
Reliable connection-based passing of datagrams of fixed maximum length (e.g. SCTP).
SRV (service) records are used by some network protocols to provide
service-specific aliasing and load-balancing. For example, XMPP
(Jabber) uses SRV records to locate the XMPP server for a domain;
rather than connecting directly to "example.com" or assuming a
specific server hostname like "xmpp.example.com", an XMPP client
would look up the "xmpp-client" SRV record for "example.com", and
then connect to whatever host was pointed to by that record.
You can use g_resolver_lookup_service() or
g_resolver_lookup_service_async() to find the #GSrvTarget<!-- -->s
for a given service. However, if you are simply planning to connect
to the remote service, you can use #GNetworkService's
#GSocketConnectable interface and not need to worry about
#GSrvTarget at all.
Creates a new #GSrvTarget with the given parameters.
You should not need to use this; normally #GSrvTarget<!-- -->s are
created by #GResolver.
a new #GSrvTarget.
the host that the service is running on
the port that the service is running on
the target's priority
the target's weight
Copies @target
a copy of @target
a #GSrvTarget
Frees @target
a #GSrvTarget
Gets @target's hostname (in ASCII form; if you are going to present
this to the user, you should use g_hostname_is_ascii_encoded() to
check if it contains encoded Unicode segments, and use
g_hostname_to_unicode() to convert it if it does.)
@target's hostname
a #GSrvTarget
Gets @target's port
@target's port
a #GSrvTarget
Gets @target's priority. You should not need to look at this;
#GResolver already sorts the targets according to the algorithm in
RFC 2782.
@target's priority
a #GSrvTarget
Gets @target's weight. You should not need to look at this;
#GResolver already sorts the targets according to the algorithm in
RFC 2782.
@target's weight
a #GSrvTarget
Sorts @targets in place according to the algorithm in RFC 2782.
the head of the sorted list.
a #GList of #GSrvTarget
Finalized a GResource initialized by g_static_resource_init().
This is normally used by code generated by
<link linkend="glib-compile-resources">glib-compile-resources</link>
and is not typically used by other code.
pointer to a static #GStaticResource
Gets the GResource that was registered by a call to g_static_resource_init().
This is normally used by code generated by
<link linkend="glib-compile-resources">glib-compile-resources</link>
and is not typically used by other code.
a #GResource
pointer to a static #GStaticResource
Initializes a GResource from static data using a
GStaticResource.
This is normally used by code generated by
<link linkend="glib-compile-resources">glib-compile-resources</link>
and is not typically used by other code.
pointer to a static #GStaticResource
Extension point for TLS functionality via #GTlsBackend.
See <link linkend="extending-gio">Extending GIO</link>.
The purpose used to verify the client certificate in a TLS connection.
Used by TLS servers.
The purpose used to verify the server certificate in a TLS connection. This
is the most common purpose in use. Used by TLS clients.
<para>
A #GTask represents and manages a cancellable "task".
</para>
<refsect2>
<title>Asynchronous operations</title>
<para>
The most common usage of #GTask is as a #GAsyncResult, to
manage data during an asynchronous operation. You call
g_task_new() in the "start" method, followed by
g_task_set_task_data() and the like if you need to keep some
additional data associated with the task, and then pass the
task object around through your asynchronous operation.
Eventually, you will call a method such as
g_task_return_pointer() or g_task_return_error(), which will
save the value you give it and then invoke the task's callback
function (waiting until the next iteration of the main
loop first, if necessary). The caller will pass the #GTask back
to the operation's finish function (as a #GAsyncResult), and
you can use g_task_propagate_pointer() or the like to extract
the return value.
</para>
<example id="gtask-async"><title>GTask as a GAsyncResult</title>
<programlisting>
typedef struct {
CakeFrostingType frosting;
char *message;
} DecorationData;
static void
decoration_data_free (DecorationData *decoration)
{
g_free (decoration->message);
g_slice_free (DecorationData, decoration);
}
static void
baked_cb (Cake *cake,
gpointer user_data)
{
GTask *task = user_data;
DecorationData *decoration = g_task_get_task_data (task);
GError *error = NULL;
if (cake == NULL)
{
g_task_return_new_error (task, BAKER_ERROR, BAKER_ERROR_NO_FLOUR,
"Go to the supermarket");
g_object_unref (task);
return;
}
if (!cake_decorate (cake, decoration->frosting, decoration->message, &error))
{
g_object_unref (cake);
/* g_task_return_error() takes ownership of error */
g_task_return_error (task, error);
g_object_unref (task);
return;
}
g_task_return_pointer (result, cake, g_object_unref);
g_object_unref (task);
}
void
baker_bake_cake_async (Baker *self,
guint radius,
CakeFlavor flavor,
CakeFrostingType frosting,
const char *message,
GCancellable *cancellable,
GAsyncReadyCallback callback,
gpointer user_data)
{
GTask *task;
DecorationData *decoration;
Cake *cake;
task = g_task_new (self, cancellable, callback, user_data);
if (radius < 3)
{
g_task_return_new_error (task, BAKER_ERROR, BAKER_ERROR_TOO_SMALL,
"%ucm radius cakes are silly",
radius);
g_object_unref (task);
return;
}
cake = _baker_get_cached_cake (self, radius, flavor, frosting, message);
if (cake != NULL)
{
/* _baker_get_cached_cake() returns a reffed cake */
g_task_return_pointer (task, cake, g_object_unref);
g_object_unref (task);
return;
}
decoration = g_slice_new (DecorationData);
decoration->frosting = frosting;
decoration->message = g_strdup (message);
g_task_set_task_data (task, decoration, (GDestroyNotify) decoration_data_free);
_baker_begin_cake (self, radius, flavor, cancellable, baked_cb, task);
}
Cake *
baker_bake_cake_finish (Baker *self,
GAsyncResult *result,
GError **error)
{
g_return_val_if_fail (g_task_is_valid (result, self), NULL);
return g_task_propagate_pointer (G_TASK (result), error);
}
</programlisting>
</example>
</refsect2>
<refsect2>
<title>Chained asynchronous operations</title>
<para>
#GTask also tries to simplify asynchronous operations that
internally chain together several smaller asynchronous
operations. g_task_get_cancellable(), g_task_get_context(), and
g_task_get_priority() allow you to get back the task's
#GCancellable, #GMainContext, and <link
linkend="io-priority">I/O priority</link> when starting a new
subtask, so you don't have to keep track of them yourself.
g_task_attach_source() simplifies the case of waiting for a
source to fire (automatically using the correct #GMainContext
and priority).
</para>
<example id="gtask-chained"><title>Chained asynchronous operations</title>
<programlisting>
typedef struct {
Cake *cake;
CakeFrostingType frosting;
char *message;
} BakingData;
static void
decoration_data_free (BakingData *bd)
{
if (bd->cake)
g_object_unref (bd->cake);
g_free (bd->message);
g_slice_free (BakingData, bd);
}
static void
decorated_cb (Cake *cake,
GAsyncResult *result,
gpointer user_data)
{
GTask *task = user_data;
GError *error = NULL;
if (!cake_decorate_finish (cake, result, &error))
{
g_object_unref (cake);
g_task_return_error (task, error);
g_object_unref (task);
return;
}
/* baking_data_free() will drop its ref on the cake, so
* we have to take another here to give to the caller.
*/
g_task_return_pointer (result, g_object_ref (cake), g_object_unref);
g_object_unref (task);
}
static void
decorator_ready (gpointer user_data)
{
GTask *task = user_data;
BakingData *bd = g_task_get_task_data (task);
cake_decorate_async (bd->cake, bd->frosting, bd->message,
g_task_get_cancellable (task),
decorated_cb, task);
}
static void
baked_cb (Cake *cake,
gpointer user_data)
{
GTask *task = user_data;
BakingData *bd = g_task_get_task_data (task);
GError *error = NULL;
if (cake == NULL)
{
g_task_return_new_error (task, BAKER_ERROR, BAKER_ERROR_NO_FLOUR,
"Go to the supermarket");
g_object_unref (task);
return;
}
bd->cake = cake;
/* Bail out now if the user has already cancelled */
if (g_task_return_error_if_cancelled (g_task_get_cancellable (task)))
{
g_object_unref (task);
return;
}
if (cake_decorator_available (cake))
decorator_ready (task);
else
{
GSource *source;
source = cake_decorator_wait_source_new (cake);
/* Attach @source to @task's GMainContext and have it call
* decorator_ready() when it is ready.
*/
g_task_attach_source (task, source,
G_CALLBACK (decorator_ready));
g_source_unref (source);
}
}
void
baker_bake_cake_async (Baker *self,
guint radius,
CakeFlavor flavor,
CakeFrostingType frosting,
const char *message,
gint priority,
GCancellable *cancellable,
GAsyncReadyCallback callback,
gpointer user_data)
{
GTask *task;
BakingData *bd;
task = g_task_new (self, cancellable, callback, user_data);
g_task_set_priority (task, priority);
bd = g_slice_new0 (BakingData);
bd->frosting = frosting;
bd->message = g_strdup (message);
g_task_set_task_data (task, bd, (GDestroyNotify) baking_data_free);
_baker_begin_cake (self, radius, flavor, cancellable, baked_cb, task);
}
Cake *
baker_bake_cake_finish (Baker *self,
GAsyncResult *result,
GError **error)
{
g_return_val_if_fail (g_task_is_valid (result, self), NULL);
return g_task_propagate_pointer (G_TASK (result), error);
}
</programlisting>
</example>
</refsect2>
<refsect2>
<title>Asynchronous operations from synchronous ones</title>
<para>
You can use g_task_run_in_thread() to turn a synchronous
operation into an asynchronous one, by running it in a thread
which will then dispatch the result back to the caller's
#GMainContext when it completes.
</para>
<example id="gtask-run-in-thread"><title>g_task_run_in_thread()</title>
<programlisting>
typedef struct {
guint radius;
CakeFlavor flavor;
CakeFrostingType frosting;
char *message;
} CakeData;
static void
cake_data_free (CakeData *cake_data)
{
g_free (cake_data->message);
g_slice_free (CakeData, cake_data);
}
static void
bake_cake_thread (GTask *task,
gpointer source_object,
gpointer task_data,
GCancellable *cancellable)
{
Baker *self = source_object;
CakeData *cake_data = task_data;
Cake *cake;
GError *error = NULL;
cake = bake_cake (baker, cake_data->radius, cake_data->flavor,
cake_data->frosting, cake_data->message,
cancellable, &error);
if (cake)
g_task_return_pointer (task, cake, g_object_unref);
else
g_task_return_error (task, error);
}
void
baker_bake_cake_async (Baker *self,
guint radius,
CakeFlavor flavor,
CakeFrostingType frosting,
const char *message,
GCancellable *cancellable,
GAsyncReadyCallback callback,
gpointer user_data)
{
CakeData *cake_data;
GTask *task;
cake_data = g_slice_new (CakeData);
cake_data->radius = radius;
cake_data->flavor = flavor;
cake_data->frosting = frosting;
cake_data->message = g_strdup (message);
task = g_task_new (self, cancellable, callback, user_data);
g_task_set_task_data (task, cake_data, (GDestroyNotify) cake_data_free);
g_task_run_in_thread (task, bake_cake_thread);
}
Cake *
baker_bake_cake_finish (Baker *self,
GAsyncResult *result,
GError **error)
{
g_return_val_if_fail (g_task_is_valid (result, self), NULL);
return g_task_propagate_pointer (G_TASK (result), error);
}
</programlisting>
</example>
</refsect2>
<refsect2>
<title>Adding cancellability to uncancellable tasks</title>
<para>
Finally, g_task_run_in_thread() and g_task_run_in_thread_sync()
can be used to turn an uncancellable operation into a
cancellable one. If you call g_task_set_return_on_cancel(),
passing %TRUE, then if the task's #GCancellable is cancelled,
it will return control back to the caller immediately, while
allowing the task thread to continue running in the background
(and simply discarding its result when it finally does finish).
Provided that the task thread is careful about how it uses
locks and other externally-visible resources, this allows you
to make "GLib-friendly" asynchronous and cancellable
synchronous variants of blocking APIs.
</para>
<example id="gtask-cancellable"><title>g_task_set_return_on_cancel()</title>
<programlisting>
static void
bake_cake_thread (GTask *task,
gpointer source_object,
gpointer task_data,
GCancellable *cancellable)
{
Baker *self = source_object;
CakeData *cake_data = task_data;
Cake *cake;
GError *error = NULL;
cake = bake_cake (baker, cake_data->radius, cake_data->flavor,
cake_data->frosting, cake_data->message,
&error);
if (error)
{
g_task_return_error (task, error);
return;
}
/* If the task has already been cancelled, then we don't
* want to add the cake to the cake cache. Likewise, we don't
* want to have the task get cancelled in the middle of
* updating the cache. g_task_set_return_on_cancel() will
* return %TRUE here if it managed to disable return-on-cancel,
* or %FALSE if the task was cancelled before it could.
*/
if (g_task_set_return_on_cancel (task, FALSE))
{
/* If the caller cancels at this point, their
* GAsyncReadyCallback won't be invoked until we return,
* so we don't have to worry that this code will run at
* the same time as that code does. But if there were
* other functions that might look at the cake cache,
* then we'd probably need a GMutex here as well.
*/
baker_add_cake_to_cache (baker, cake);
g_task_return_pointer (task, cake, g_object_unref);
}
}
void
baker_bake_cake_async (Baker *self,
guint radius,
CakeFlavor flavor,
CakeFrostingType frosting,
const char *message,
GCancellable *cancellable,
GAsyncReadyCallback callback,
gpointer user_data)
{
CakeData *cake_data;
GTask *task;
cake_data = g_slice_new (CakeData);
/* ... */
task = g_task_new (self, cancellable, callback, user_data);
g_task_set_task_data (task, cake_data, (GDestroyNotify) cake_data_free);
g_task_set_return_on_cancel (task, TRUE);
g_task_run_in_thread (task, bake_cake_thread);
}
Cake *
baker_bake_cake_sync (Baker *self,
guint radius,
CakeFlavor flavor,
CakeFrostingType frosting,
const char *message,
GCancellable *cancellable,
GError **error)
{
CakeData *cake_data;
GTask *task;
Cake *cake;
cake_data = g_slice_new (CakeData);
/* ... */
task = g_task_new (self, cancellable, NULL, NULL);
g_task_set_task_data (task, cake_data, (GDestroyNotify) cake_data_free);
g_task_set_return_on_cancel (task, TRUE);
g_task_run_in_thread_sync (task, bake_cake_thread);
cake = g_task_propagate_pointer (task, error);
g_object_unref (task);
return cake;
}
</programlisting>
</example>
</refsect2>
<refsect2>
<title>Porting from <literal>GSimpleAsyncResult</literal></title>
<para>
#GTask's API attempts to be simpler than #GSimpleAsyncResult's
in several ways:
</para>
<itemizedlist>
<listitem><para>
You can save task-specific data with g_task_set_task_data(), and
retrieve it later with g_task_get_task_data(). This replaces the
abuse of g_simple_async_result_set_op_res_gpointer() for the same
purpose with #GSimpleAsyncResult.
</para></listitem>
<listitem><para>
In addition to the task data, #GTask also keeps track of the
<link linkend="io-priority">priority</link>, #GCancellable, and
#GMainContext associated with the task, so tasks that consist of
a chain of simpler asynchronous operations will have easy access
to those values when starting each sub-task.
</para></listitem>
<listitem><para>
g_task_return_error_if_cancelled() provides simplified
handling for cancellation. In addition, cancellation
overrides any other #GTask return value by default, like
#GSimpleAsyncResult does when
g_simple_async_result_set_check_cancellable() is called.
(You can use g_task_set_check_cancellable() to turn off that
behavior.) On the other hand, g_task_run_in_thread()
guarantees that it will always run your
<literal>task_func</literal>, even if the task's #GCancellable
is already cancelled before the task gets a chance to run;
you can start your <literal>task_func</literal> with a
g_task_return_error_if_cancelled() check if you need the
old behavior.
</para></listitem>
<listitem><para>
The "return" methods (eg, g_task_return_pointer())
automatically cause the task to be "completed" as well, and
there is no need to worry about the "complete" vs "complete
in idle" distinction. (#GTask automatically figures out
whether the task's callback can be invoked directly, or
if it needs to be sent to another #GMainContext, or delayed
until the next iteration of the current #GMainContext.)
</para></listitem>
<listitem><para>
The "finish" functions for #GTask-based operations are generally
much simpler than #GSimpleAsyncResult ones, normally consisting
of only a single call to g_task_propagate_pointer() or the like.
Since g_task_propagate_pointer() "steals" the return value from
the #GTask, it is not necessary to juggle pointers around to
prevent it from being freed twice.
</para></listitem>
<listitem><para>
With #GSimpleAsyncResult, it was common to call
g_simple_async_result_propagate_error() from the
<literal>_finish()</literal> wrapper function, and have
virtual method implementations only deal with successful
returns. This behavior is deprecated, because it makes it
difficult for a subclass to chain to a parent class's async
methods. Instead, the wrapper function should just be a
simple wrapper, and the virtual method should call an
appropriate <literal>g_task_propagate_</literal> function.
Note that wrapper methods can now use
g_async_result_legacy_propagate_error() to do old-style
#GSimpleAsyncResult error-returning behavior, and
g_async_result_is_tagged() to check if a result is tagged as
having come from the <literal>_async()</literal> wrapper
function (for "short-circuit" results, such as when passing
0 to g_input_stream_read_async()).
</para></listitem>
</itemizedlist>
</refsect2>
Creates a #GTask acting on @source_object, which will eventually be
used to invoke @callback in the current <link
linkend="g-main-context-push-thread-default">thread-default main
context</link>.
Call this in the "start" method of your asynchronous method, and
pass the #GTask around throughout the asynchronous operation. You
can use g_task_set_task_data() to attach task-specific data to the
object, which you can retrieve later via g_task_get_task_data().
By default, if @cancellable is cancelled, then the return value of
the task will always be %G_IO_ERROR_CANCELLED, even if the task had
already completed before the cancellation. This allows for
simplified handling in cases where cancellation may imply that
other objects that the task depends on have been destroyed. If you
do not want this behavior, you can use
g_task_set_check_cancellable() to change it.
a #GTask.
the #GObject that owns this task, or %NULL.
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback.
user data passed to @callback.
Checks that @result is a #GTask, and that @source_object is its
source object (or that @source_object is %NULL and @result has no
source object). This can be used in g_return_if_fail() checks.
%TRUE if @result and @source_object are valid, %FALSE if not
A #GAsyncResult
the source object expected to be associated with the task
Creates a #GTask and then immediately calls g_task_return_error()
on it. Use this in the wrapper function of an asynchronous method
when you want to avoid even calling the virtual method. You can
then use g_async_result_is_tagged() in the finish method wrapper to
check if the result there is tagged as having been created by the
wrapper method, and deal with it appropriately if so.
See also g_task_report_new_error().
the #GObject that owns this task, or %NULL.
a #GAsyncReadyCallback.
user data passed to @callback.
an opaque pointer indicating the source of this task
error to report
Creates a #GTask and then immediately calls
g_task_return_new_error() on it. Use this in the wrapper function
of an asynchronous method when you want to avoid even calling the
virtual method. You can then use g_async_result_is_tagged() in the
finish method wrapper to check if the result there is tagged as
having been created by the wrapper method, and deal with it
appropriately if so.
See also g_task_report_error().
the #GObject that owns this task, or %NULL.
a #GAsyncReadyCallback.
user data passed to @callback.
an opaque pointer indicating the source of this task
a #GQuark.
an error code.
a string with format characters.
A utility function for dealing with async operations where you need
to wait for a #GSource to trigger. Attaches @source to @task's
#GMainContext with @task's <link
linkend="io-priority">priority</link>, and sets @source's callback
to @callback, with @task as the callback's
<literal>user_data</literal>.
This takes a reference on @task until @source is destroyed.
a #GTask
the source to attach
the callback to invoke when @source triggers
Gets @task's #GCancellable
@task's #GCancellable
a #GTask
Gets @task's check-cancellable flag. See
g_task_set_check_cancellable() for more details.
the #GTask
Gets the #GMainContext that @task will return its result in (that
is, the context that was the <link
linkend="g-main-context-push-thread-default">thread-default main
context</link> at the point when @task was created).
This will always return a non-%NULL value, even if the task's
context is the default #GMainContext.
@task's #GMainContext
a #GTask
Gets @task's priority
@task's priority
a #GTask
Gets @task's return-on-cancel flag. See
g_task_set_return_on_cancel() for more details.
the #GTask
Gets the source object from @task. Like
g_async_result_get_source_object(), but does not ref the object.
@task's source object, or %NULL
a #GTask
Gets @task's source tag. See g_task_set_source_tag().
@task's source tag
a #GTask
Gets @task's <literal>task_data</literal>.
@task's <literal>task_data</literal>.
a #GTask
Tests if @task resulted in an error.
%TRUE if the task resulted in an error, %FALSE otherwise.
a #GTask.
Gets the result of @task as a #gboolean.
If the task resulted in an error, or was cancelled, then this will
instead return %FALSE and set @error.
Since this method transfers ownership of the return value (or
error) to the caller, you may only call it once.
the task result, or %FALSE on error
a #GTask.
Gets the result of @task as an integer (#gssize).
If the task resulted in an error, or was cancelled, then this will
instead return -1 and set @error.
Since this method transfers ownership of the return value (or
error) to the caller, you may only call it once.
the task result, or -1 on error
a #GTask.
Gets the result of @task as a pointer, and transfers ownership
of that value to the caller.
If the task resulted in an error, or was cancelled, then this will
instead return %NULL and set @error.
Since this method transfers ownership of the return value (or
error) to the caller, you may only call it once.
the task result, or %NULL on error
a #GTask
Sets @task's result to @result and completes the task (see
g_task_return_pointer() for more discussion of exactly what this
means).
a #GTask.
the #gboolean result of a task function.
Sets @task's result to @error (which @task assumes ownership of)
and completes the task (see g_task_return_pointer() for more
discussion of exactly what this means).
Note that since the task takes ownership of @error, and since the
task may be completed before returning from g_task_return_error(),
you cannot assume that @error is still valid after calling this.
Call g_error_copy() on the error if you need to keep a local copy
as well.
See also g_task_return_new_error().
a #GTask.
the #GError result of a task function.
Checks if @task's #GCancellable has been cancelled, and if so, sets
@task's error accordingly and completes the task (see
g_task_return_pointer() for more discussion of exactly what this
means).
%TRUE if @task has been cancelled, %FALSE if not
a #GTask
Sets @task's result to @result and completes the task (see
g_task_return_pointer() for more discussion of exactly what this
means).
a #GTask.
the integer (#gssize) result of a task function.
Sets @task's result to a new #GError created from @domain, @code,
@format, and the remaining arguments, and completes the task (see
g_task_return_pointer() for more discussion of exactly what this
means).
See also g_task_return_error().
a #GTask.
a #GQuark.
an error code.
a string with format characters.
Sets @task's result to @result and completes the task. If @result
is not %NULL, then @result_destroy will be used to free @result if
the caller does not take ownership of it with
g_task_propagate_pointer().
"Completes the task" means that for an ordinary asynchronous task
it will either invoke the task's callback, or else queue that
callback to be invoked in the proper #GMainContext, or in the next
iteration of the current #GMainContext. For a task run via
g_task_run_in_thread() or g_task_run_in_thread_sync(), calling this
method will save @result to be returned to the caller later, but
the task will not actually be completed until the #GTaskThreadFunc
exits.
Note that since the task may be completed before returning from
g_task_return_pointer(), you cannot assume that @result is still
valid after calling this, unless you are still holding another
reference on it.
a #GTask
the pointer result of a task function
a #GDestroyNotify function.
Runs @task_func in another thread. When @task_func returns, @task's
#GAsyncReadyCallback will be invoked in @task's #GMainContext.
This takes a ref on @task until the task completes.
See #GTaskThreadFunc for more details about how @task_func is handled.
a #GTask
a #GTaskThreadFunc
Runs @task_func in another thread, and waits for it to return or be
cancelled. You can use g_task_propagate_pointer(), etc, afterward
to get the result of @task_func.
See #GTaskThreadFunc for more details about how @task_func is handled.
Normally this is used with tasks created with a %NULL
<literal>callback</literal>, but note that even if the task does
have a callback, it will not be invoked when @task_func returns.
a #GTask
a #GTaskThreadFunc
Sets or clears @task's check-cancellable flag. If this is %TRUE
(the default), then g_task_propagate_pointer(), etc, and
g_task_had_error() will check the task's #GCancellable first, and
if it has been cancelled, then they will consider the task to have
returned an "Operation was cancelled" error
(%G_IO_ERROR_CANCELLED), regardless of any other error or return
value the task may have had.
If @check_cancellable is %FALSE, then the #GTask will not check the
cancellable itself, and it is up to @task's owner to do this (eg,
via g_task_return_error_if_cancelled()).
If you are using g_task_set_return_on_cancel() as well, then
you must leave check-cancellable set %TRUE.
the #GTask
whether #GTask will check the state of its #GCancellable for you.
Sets @task's priority. If you do not call this, it will default to
%G_PRIORITY_DEFAULT.
This will affect the priority of #GSources created with
g_task_attach_source() and the scheduling of tasks run in threads,
and can also be explicitly retrieved later via
g_task_get_priority().
the #GTask
the <link linkend="io-priority">priority</link> of the request.
Sets or clears @task's return-on-cancel flag. This is only
meaningful for tasks run via g_task_run_in_thread() or
g_task_run_in_thread_sync().
If @return_on_cancel is %TRUE, then cancelling @task's
#GCancellable will immediately cause it to return, as though the
task's #GTaskThreadFunc had called
g_task_return_error_if_cancelled() and then returned.
This allows you to create a cancellable wrapper around an
uninterruptable function. The #GTaskThreadFunc just needs to be
careful that it does not modify any externally-visible state after
it has been cancelled. To do that, the thread should call
g_task_set_return_on_cancel() again to (atomically) set
return-on-cancel %FALSE before making externally-visible changes;
if the task gets cancelled before the return-on-cancel flag could
be changed, g_task_set_return_on_cancel() will indicate this by
returning %FALSE.
You can disable and re-enable this flag multiple times if you wish.
If the task's #GCancellable is cancelled while return-on-cancel is
%FALSE, then calling g_task_set_return_on_cancel() to set it %TRUE
again will cause the task to be cancelled at that point.
If the task's #GCancellable is already cancelled before you call
g_task_run_in_thread()/g_task_run_in_thread_sync(), then the
#GTaskThreadFunc will still be run (for consistency), but the task
will also be completed right away.
%TRUE if @task's return-on-cancel flag was changed to match @return_on_cancel. %FALSE if @task has already been cancelled.
the #GTask
whether the task returns automatically when it is cancelled.
Sets @task's source tag. You can use this to tag a task return
value with a particular pointer (usually a pointer to the function
doing the tagging) and then later check it using
g_task_get_source_tag() (or g_async_result_is_tagged()) in the
task's "finish" function, to figure out if the response came from a
particular place.
the #GTask
an opaque pointer indicating the source of this task
Sets @task's task data (freeing the existing task data, if any).
the #GTask
task-specific data
#GDestroyNotify for @task_data
The prototype for a task function to be run in a thread via
g_task_run_in_thread() or g_task_run_in_thread_sync().
If the return-on-cancel flag is set on @task, and @cancellable gets
cancelled, then the #GTask will be completed immediately (as though
g_task_return_error_if_cancelled() had been called), without
waiting for the task function to complete. However, the task
function will continue running in its thread in the background. The
function therefore needs to be careful about how it uses
externally-visible state in this case. See
g_task_set_return_on_cancel() for more details.
Other than in that case, @task will be completed when the
#GTaskThreadFunc returns, <emphasis>not</emphasis> when it calls
a <literal>g_task_return_</literal> function.
the #GTask
@task's source object
@task's task data
@task's #GCancellable, or %NULL
This is the subclass of #GSocketConnection that is created
for TCP/IP sockets.
Checks if graceful disconnects are used. See
g_tcp_connection_set_graceful_disconnect().
%TRUE if graceful disconnect is used on close, %FALSE otherwise
a #GTcpConnection
This enabled graceful disconnects on close. A graceful disconnect
means that we signal the receiving end that the connection is terminated
and wait for it to close the connection before closing the connection.
A graceful disconnect means that we can be sure that we successfully sent
all the outstanding data to the other end, or get an error reported.
However, it also means we have to wait for all the data to reach the
other side and for it to acknowledge this by closing the socket, which may
take a while. For this reason it is disabled by default.
a #GTcpConnection
Whether to do graceful disconnects or not
A #GTcpWrapperConnection can be used to wrap a #GIOStream that is
based on a #GSocket, but which is not actually a
#GSocketConnection. This is used by #GSocketClient so that it can
always return a #GSocketConnection, even when the connection it has
actually created is not directly a #GSocketConnection.
Wraps @base_io_stream and @socket together as a #GSocketConnection.
the new #GSocketConnection.
the #GIOStream to wrap
the #GSocket associated with @base_io_stream
Get's @conn's base #GIOStream
@conn's base #GIOStream
a #GTcpWrapperConnection
A helper class for testing code which uses D-Bus without touching the user's
session bus.
<refsect2 id="gio-D-Bus-Test-Scaffolding">
<title>Creating unit tests using GTestDBus</title>
<para>
Testing of D-Bus services can be tricky because normally we only ever run
D-Bus services over an existing instance of the D-Bus daemon thus we
usually don't activate D-Bus services that are not yet installed into the
target system. The #GTestDBus object makes this easier for us by taking care
of the lower level tasks such as running a private D-Bus daemon and looking
up uninstalled services in customizable locations, typically in your source code tree.
</para>
<para>
The first thing you will need is a separate service description file for the
D-Bus daemon. Typically a 'services' subdirectory of your 'tests' directory
is a good place to put this file.
</para>
<para>
The service file should list your service along with an absolute path to the
uninstalled service executable in your source tree. Using autotools we would
achieve this by adding a file such as 'my-server.service.in' in the services
directory and have it processed by configure.
<informalexample><programlisting>
[D-BUS Service]
Name=org.gtk.GDBus.Examples.ObjectManager
Exec=@abs_top_builddir@/gio/tests/gdbus-example-objectmanager-server
</programlisting></informalexample>
You will also need to indicate this service directory in your test
fixtures, so you will need to pass the path while compiling your
test cases. Typically this is done with autotools with an added
preprocessor flag specified to compile your tests such as:
<informalexample><programlisting>
-DTEST_SERVICES=\""$(abs_top_builddir)/tests/services"\"
</programlisting></informalexample>
</para>
<para>
Once you have a service definition file which is local to your source tree,
you can proceed to setup a GTest fixture using the GTestDBus scaffolding.
<example id="gdbus-test-fixture">
<title>Test Fixture for D-Bus services</title>
<programlisting>
<xi:include xmlns:xi="http://www.w3.org/2001/XInclude" parse="text" href="../../../../gio/tests/gdbus-test-fixture.c">
<xi:fallback>FIXME: MISSING XINCLUDE CONTENT</xi:fallback>
</xi:include>
</programlisting>
</example>
</para>
<para>
Note that these examples only deal with isolating the D-Bus aspect of your
service. To successfully run isolated unit tests on your service you may need
some additional modifications to your test case fixture. For example; if your
service uses GSettings and installs a schema then it is important that your test service
not load the schema in the ordinary installed location (chances are that your service
and schema files are not yet installed, or worse; there is an older version of the
schema file sitting in the install location).
</para>
<para>
Most of the time we can work around these obstacles using the environment. Since the
environment is inherited by the D-Bus daemon created by GTestDBus and then in turn
inherited by any services the D-Bus daemon activates, using the setup routine for your
fixture is a practical place to help sandbox your runtime environment. For the rather
typical GSettings case we can work around this by setting GSETTINGS_SCHEMA_DIR to the
in tree directory holding your schemas in the above fixture_setup() routine.
</para>
<para>
The GSettings schemas need to be locally pre-compiled for this to work. This can be achieved
by compiling the schemas locally as a step before running test cases, an autotools setup might
do the following in the directory holding schemas:
<informalexample><programlisting>
all-am:
$(GLIB_COMPILE_SCHEMAS) .
CLEANFILES += gschemas.compiled
</programlisting></informalexample>
</para>
</refsect2>
Create a new #GTestDBus object.
a new #GTestDBus.
a #GTestDBusFlags
Unset DISPLAY and DBUS_SESSION_BUS_ADDRESS env variables to ensure the test
won't use user's session bus.
This is useful for unit tests that want to verify behaviour when no session
bus is running. It is not necessary to call this if unit test already calls
g_test_dbus_up() before acquiring the session bus.
Add a path where dbus-daemon will lookup for .services files. This can't be
called after g_test_dbus_up().
a #GTestDBus
path to a directory containing .service files
Stop the session bus started by g_test_dbus_up().
This will wait for the singleton returned by g_bus_get() or g_bus_get_sync()
is destroyed. This is done to ensure that the next unit test won't get a
leaked singleton from this test.
a #GTestDBus
Get the address on which dbus-daemon is running. if g_test_dbus_up() has not
been called yet, %NULL is returned. This can be used with
g_dbus_connection_new_for_address()
the address of the bus, or %NULL.
a #GTestDBus
Gets the flags of the #GTestDBus object.
the value of #GTestDBus:flags property
a #GTestDBus
Stop the session bus started by g_test_dbus_up().
Unlike g_test_dbus_down(), this won't verify the #GDBusConnection
singleton returned by g_bus_get() or g_bus_get_sync() is destroyed. Unit
tests wanting to verify behaviour after the session bus has been stopped
can use this function but should still call g_test_dbus_down() when done.
a #GTestDBus
Start a dbus-daemon instance and set DBUS_SESSION_BUS_ADDRESS. After this
call, it is safe for unit tests to start sending messages on the session bus.
If this function is called from setup callback of g_test_add(),
g_test_dbus_down() must be called in its teardown callback.
If this function is called from unit test's main(), then g_test_dbus_down()
must be called after g_test_run().
a #GTestDBus
#GTestDBusFlags specifying the behaviour of the dbus session
Flags to define future #GTestDBus behaviour.
No flags.
#GThemedIcon is an implementation of #GIcon that supports icon themes.
#GThemedIcon contains a list of all of the icons present in an icon
theme, so that icons can be looked up quickly. #GThemedIcon does
not provide actual pixmaps for icons, just the icon names.
Ideally something like gtk_icon_theme_choose_icon() should be used to
resolve the list of names so that fallback icons work nicely with
themes that inherit other themes.
Creates a new themed icon for @iconname.
a new #GThemedIcon.
a string containing an icon name.
Creates a new themed icon for @iconnames.
a new #GThemedIcon
an array of strings containing icon names.
the length of the @iconnames array, or -1 if @iconnames is %NULL-terminated
Creates a new themed icon for @iconname, and all the names
that can be created by shortening @iconname at '-' characters.
In the following example, @icon1 and @icon2 are equivalent:
|[
const char *names[] = {
"gnome-dev-cdrom-audio",
"gnome-dev-cdrom",
"gnome-dev",
"gnome"
};
icon1 = g_themed_icon_new_from_names (names, 4);
icon2 = g_themed_icon_new_with_default_fallbacks ("gnome-dev-cdrom-audio");
]|
a new #GThemedIcon.
a string containing an icon name
Append a name to the list of icons from within @icon.
<note><para>
Note that doing so invalidates the hash computed by prior calls
to g_icon_hash().
</para></note>
a #GThemedIcon
name of icon to append to list of icons from within @icon.
Gets the names of icons from within @icon.
a list of icon names.
a #GThemedIcon.
Prepend a name to the list of icons from within @icon.
<note><para>
Note that doing so invalidates the hash computed by prior calls
to g_icon_hash().
</para></note>
a #GThemedIcon
name of icon to prepend to list of icons from within @icon.
The icon name.
A %NULL-terminated array of icon names.
Whether to use the default fallbacks found by shortening the icon name
at '-' characters. If the "names" array has more than one element,
ignores any past the first.
For example, if the icon name was "gnome-dev-cdrom-audio", the array
would become
|[
{
"gnome-dev-cdrom-audio",
"gnome-dev-cdrom",
"gnome-dev",
"gnome",
NULL
};
]|
A #GThreadedSocketService is a simple subclass of #GSocketService
that handles incoming connections by creating a worker thread and
dispatching the connection to it by emitting the
#GThreadedSocketService::run signal in the new thread.
The signal handler may perform blocking IO and need not return
until the connection is closed.
The service is implemented using a thread pool, so there is a
limited amount of threads available to serve incoming requests.
The service automatically stops the #GSocketService from accepting
new connections when all threads are busy.
As with #GSocketService, you may connect to #GThreadedSocketService::run,
or subclass and override the default handler.
Creates a new #GThreadedSocketService with no listeners. Listeners
must be added with one of the #GSocketListener "add" methods.
a new #GSocketService.
the maximal number of threads to execute concurrently handling incoming clients, -1 means no limit
The ::run signal is emitted in a worker thread in response to an
incoming connection. This thread is dedicated to handling
@connection and may perform blocking IO. The signal handler need
not return until the connection is closed.
%TRUE to stop further signal handlers from being called
a new #GSocketConnection object.
the source_object passed to g_socket_listener_add_address().
The client authentication mode for a #GTlsServerConnection.
client authentication not required
client authentication is requested
client authentication is required
Gets the default #GTlsBackend for the system.
a #GTlsBackend
Gets the default #GTlsDatabase used to verify TLS connections.
the default database, which should be unreffed when done.
Checks if TLS is supported; if this returns %FALSE for the default
#GTlsBackend, it means no "real" TLS backend is available.
whether or not TLS is supported
Gets the #GType of @backend's #GTlsCertificate implementation.
the #GType of @backend's #GTlsCertificate implementation.
the #GTlsBackend
Gets the #GType of @backend's #GTlsClientConnection implementation.
the #GType of @backend's #GTlsClientConnection implementation.
the #GTlsBackend
Gets the default #GTlsDatabase used to verify TLS connections.
the default database, which should be unreffed when done.
the #GTlsBackend
Gets the #GType of @backend's #GTlsFileDatabase implementation.
the #GType of backend's #GTlsFileDatabase implementation.
the #GTlsBackend
Gets the #GType of @backend's #GTlsServerConnection implementation.
the #GType of @backend's #GTlsServerConnection implementation.
the #GTlsBackend
Checks if TLS is supported; if this returns %FALSE for the default
#GTlsBackend, it means no "real" TLS backend is available.
whether or not TLS is supported
the #GTlsBackend
Provides an interface for describing TLS-related types.
whether or not TLS is supported
the default database, which should be unreffed when done.
A certificate used for TLS authentication and encryption.
This can represent either a certificate only (eg, the certificate
received by a client from a server), or the combination of
a certificate and a private key (which is needed when acting as a
#GTlsServerConnection).
Creates a #GTlsCertificate from the PEM-encoded data in @file. If
@file cannot be read or parsed, the function will return %NULL and
set @error. Otherwise, this behaves like
g_tls_certificate_new_from_pem().
the new certificate, or %NULL on error
file containing a PEM-encoded certificate to import
Creates a #GTlsCertificate from the PEM-encoded data in @cert_file
and @key_file. If either file cannot be read or parsed, the
function will return %NULL and set @error. Otherwise, this behaves
like g_tls_certificate_new_from_pem().
the new certificate, or %NULL on error
file containing a PEM-encoded certificate to import
file containing a PEM-encoded private key to import
Creates a new #GTlsCertificate from the PEM-encoded data in @data.
If @data includes both a certificate and a private key, then the
returned certificate will include the private key data as well. (See
the #GTlsCertificate:private-key-pem property for information about
supported formats.)
If @data includes multiple certificates, only the first one will be
parsed.
the new certificate, or %NULL if @data is invalid
PEM-encoded certificate data
the length of @data, or -1 if it's 0-terminated.
Creates one or more #GTlsCertificate<!-- -->s from the PEM-encoded
data in @file. If @file cannot be read or parsed, the function will
return %NULL and set @error. If @file does not contain any
PEM-encoded certificates, this will return an empty list and not
set @error.
a #GList containing #GTlsCertificate objects. You must free the list and its contents when you are done with it.
file containing PEM-encoded certificates to import
This verifies @cert and returns a set of #GTlsCertificateFlags
indicating any problems found with it. This can be used to verify a
certificate outside the context of making a connection, or to
check a certificate against a CA that is not part of the system
CA database.
If @identity is not %NULL, @cert's name(s) will be compared against
it, and %G_TLS_CERTIFICATE_BAD_IDENTITY will be set in the return
value if it does not match. If @identity is %NULL, that bit will
never be set in the return value.
If @trusted_ca is not %NULL, then @cert (or one of the certificates
in its chain) must be signed by it, or else
%G_TLS_CERTIFICATE_UNKNOWN_CA will be set in the return value. If
@trusted_ca is %NULL, that bit will never be set in the return
value.
(All other #GTlsCertificateFlags values will always be set or unset
as appropriate.)
the appropriate #GTlsCertificateFlags
the expected peer identity
the certificate of a trusted authority
Gets the #GTlsCertificate representing @cert's issuer, if known
The certificate of @cert's issuer, or %NULL if @cert is self-signed or signed with an unknown certificate.
a #GTlsCertificate
Check if two #GTlsCertificate objects represent the same certificate.
The raw DER byte data of the two certificates are checked for equality.
This has the effect that two certificates may compare equal even if
their #GTlsCertificate:issuer, #GTlsCertificate:private-key, or
#GTlsCertificate:private-key-pem properties differ.
whether the same or not
first certificate to compare
second certificate to compare
This verifies @cert and returns a set of #GTlsCertificateFlags
indicating any problems found with it. This can be used to verify a
certificate outside the context of making a connection, or to
check a certificate against a CA that is not part of the system
CA database.
If @identity is not %NULL, @cert's name(s) will be compared against
it, and %G_TLS_CERTIFICATE_BAD_IDENTITY will be set in the return
value if it does not match. If @identity is %NULL, that bit will
never be set in the return value.
If @trusted_ca is not %NULL, then @cert (or one of the certificates
in its chain) must be signed by it, or else
%G_TLS_CERTIFICATE_UNKNOWN_CA will be set in the return value. If
@trusted_ca is %NULL, that bit will never be set in the return
value.
(All other #GTlsCertificateFlags values will always be set or unset
as appropriate.)
the appropriate #GTlsCertificateFlags
a #GTlsCertificate
the expected peer identity
the certificate of a trusted authority
The DER (binary) encoded representation of the certificate.
This property and the #GTlsCertificate:certificate-pem property
represent the same data, just in different forms.
The PEM (ASCII) encoded representation of the certificate.
This property and the #GTlsCertificate:certificate
property represent the same data, just in different forms.
A #GTlsCertificate representing the entity that issued this
certificate. If %NULL, this means that the certificate is either
self-signed, or else the certificate of the issuer is not
available.
The DER (binary) encoded representation of the certificate's
private key, in either PKCS#1 format or unencrypted PKCS#8
format. This property (or the #GTlsCertificate:private-key-pem
property) can be set when constructing a key (eg, from a file),
but cannot be read.
PKCS#8 format is supported since 2.32; earlier releases only
support PKCS#1. You can use the <literal>openssl rsa</literal>
tool to convert PKCS#8 keys to PKCS#1.
The PEM (ASCII) encoded representation of the certificate's
private key in either PKCS#1 format ("<literal>BEGIN RSA PRIVATE
KEY</literal>") or unencrypted PKCS#8 format ("<literal>BEGIN
PRIVATE KEY</literal>"). This property (or the
#GTlsCertificate:private-key property) can be set when
constructing a key (eg, from a file), but cannot be read.
PKCS#8 format is supported since 2.32; earlier releases only
support PKCS#1. You can use the <literal>openssl rsa</literal>
tool to convert PKCS#8 keys to PKCS#1.
the appropriate #GTlsCertificateFlags
the expected peer identity
the certificate of a trusted authority
A set of flags describing TLS certification validation. This can be
used to set which validation steps to perform (eg, with
g_tls_client_connection_set_validation_flags()), or to describe why
a particular certificate was rejected (eg, in
#GTlsConnection::accept-certificate).
The signing certificate authority is not known.
The certificate does not match the expected identity of the site that it was retrieved from.
The certificate's activation time is still in the future
The certificate has expired
The certificate has been revoked according to the #GTlsConnection's certificate revocation list.
The certificate's algorithm is considered insecure.
Some other error occurred validating the certificate
the combination of all of the above flags
#GTlsClientConnection is the client-side subclass of
#GTlsConnection, representing a client-side TLS connection.
Creates a new #GTlsClientConnection wrapping @base_io_stream (which
must have pollable input and output streams) which is assumed to
communicate with the server identified by @server_identity.
the new #GTlsClientConnection, or %NULL on error
the #GIOStream to wrap
the expected identity of the server
Gets the list of distinguished names of the Certificate Authorities
that the server will accept certificates from. This will be set
during the TLS handshake if the server requests a certificate.
Otherwise, it will be %NULL.
Each item in the list is a #GByteArray which contains the complete
subject DN of the certificate authority.
the list of CA DNs. You should unref each element with g_byte_array_unref() and then the free the list with g_list_free().
the #GTlsClientConnection
Gets @conn's expected server identity
a #GSocketConnectable describing the expected server identity, or %NULL if the expected identity is not known.
the #GTlsClientConnection
Gets whether @conn will use SSL 3.0 rather than the
highest-supported version of TLS; see
g_tls_client_connection_set_use_ssl3().
whether @conn will use SSL 3.0
the #GTlsClientConnection
Gets @conn's validation flags
the validation flags
the #GTlsClientConnection
Sets @conn's expected server identity, which is used both to tell
servers on virtual hosts which certificate to present, and also
to let @conn know what name to look for in the certificate when
performing %G_TLS_CERTIFICATE_BAD_IDENTITY validation, if enabled.
the #GTlsClientConnection
a #GSocketConnectable describing the expected server identity
If @use_ssl3 is %TRUE, this forces @conn to use SSL 3.0 rather than
trying to properly negotiate the right version of TLS or SSL to use.
This can be used when talking to servers that do not implement the
fallbacks correctly and which will therefore fail to handshake with
a "modern" TLS handshake attempt.
the #GTlsClientConnection
whether to use SSL 3.0
Sets @conn's validation flags, to override the default set of
checks performed when validating a server certificate. By default,
%G_TLS_CERTIFICATE_VALIDATE_ALL is used.
the #GTlsClientConnection
the #GTlsCertificateFlags to use
A list of the distinguished names of the Certificate Authorities
that the server will accept client certificates signed by. If the
server requests a client certificate during the handshake, then
this property will be set after the handshake completes.
Each item in the list is a #GByteArray which contains the complete
subject DN of the certificate authority.
A #GSocketConnectable describing the identity of the server that
is expected on the other end of the connection.
If the %G_TLS_CERTIFICATE_BAD_IDENTITY flag is set in
#GTlsClientConnection:validation-flags, this object will be used
to determine the expected identify of the remote end of the
connection; if #GTlsClientConnection:server-identity is not set,
or does not match the identity presented by the server, then the
%G_TLS_CERTIFICATE_BAD_IDENTITY validation will fail.
In addition to its use in verifying the server certificate,
this is also used to give a hint to the server about what
certificate we expect, which is useful for servers that serve
virtual hosts.
If %TRUE, tells the connection to use SSL 3.0 rather than trying
to negotiate the best version of TLS or SSL to use. This can be
used when talking to servers that don't implement version
negotiation correctly and therefore refuse to handshake at all with
a "modern" TLS handshake.
What steps to perform when validating a certificate received from
a server. Server certificates that fail to validate in all of the
ways indicated here will be rejected unless the application
overrides the default via #GTlsConnection::accept-certificate.
#GTlsConnection is the base TLS connection class type, which wraps
a #GIOStream and provides TLS encryption on top of it. Its
subclasses, #GTlsClientConnection and #GTlsServerConnection,
implement client-side and server-side TLS, respectively.
Attempts a TLS handshake on @conn.
On the client side, it is never necessary to call this method;
although the connection needs to perform a handshake after
connecting (or after sending a "STARTTLS"-type command) and may
need to rehandshake later if the server requests it,
#GTlsConnection will handle this for you automatically when you try
to send or receive data on the connection. However, you can call
g_tls_connection_handshake() manually if you want to know for sure
whether the initial handshake succeeded or failed (as opposed to
just immediately trying to write to @conn's output stream, in which
case if it fails, it may not be possible to tell if it failed
before or after completing the handshake).
Likewise, on the server side, although a handshake is necessary at
the beginning of the communication, you do not need to call this
function explicitly unless you want clearer error reporting.
However, you may call g_tls_connection_handshake() later on to
renegotiate parameters (encryption methods, etc) with the client.
#GTlsConnection::accept_certificate may be emitted during the
handshake.
success or failure
a #GCancellable, or %NULL
Asynchronously performs a TLS handshake on @conn. See
g_tls_connection_handshake() for more information.
the <link linkend="io-priority">I/O priority</link> of the request.
a #GCancellable, or %NULL
callback to call when the handshake is complete
the data to pass to the callback function
Finish an asynchronous TLS handshake operation. See
g_tls_connection_handshake() for more information.
%TRUE on success, %FALSE on failure, in which case @error will be set.
a #GAsyncResult.
Used by #GTlsConnection implementations to emit the
#GTlsConnection::accept-certificate signal.
%TRUE if one of the signal handlers has returned %TRUE to accept @peer_cert
a #GTlsConnection
the peer's #GTlsCertificate
the problems with @peer_cert
Gets @conn's certificate, as set by
g_tls_connection_set_certificate().
@conn's certificate, or %NULL
a #GTlsConnection
Gets the certificate database that @conn uses to verify
peer certificates. See g_tls_connection_set_database().
the certificate database that @conn uses or %NULL
a #GTlsConnection
Get the object that will be used to interact with the user. It will be used
for things like prompting the user for passwords. If %NULL is returned, then
no user interaction will occur for this connection.
The interaction object.
a connection
Gets @conn's peer's certificate after the handshake has completed.
(It is not set during the emission of
#GTlsConnection::accept-certificate.)
@conn's peer's certificate, or %NULL
a #GTlsConnection
Gets the errors associated with validating @conn's peer's
certificate, after the handshake has completed. (It is not set
during the emission of #GTlsConnection::accept-certificate.)
@conn's peer's certificate errors
a #GTlsConnection
Gets @conn rehandshaking mode. See
g_tls_connection_set_rehandshake_mode() for details.
@conn's rehandshaking mode
a #GTlsConnection
Tests whether or not @conn expects a proper TLS close notification
when the connection is closed. See
g_tls_connection_set_require_close_notify() for details.
%TRUE if @conn requires a proper TLS close notification.
a #GTlsConnection
Gets whether @conn uses the system certificate database to verify
peer certificates. See g_tls_connection_set_use_system_certdb().
whether @conn uses the system certificate database
a #GTlsConnection
Attempts a TLS handshake on @conn.
On the client side, it is never necessary to call this method;
although the connection needs to perform a handshake after
connecting (or after sending a "STARTTLS"-type command) and may
need to rehandshake later if the server requests it,
#GTlsConnection will handle this for you automatically when you try
to send or receive data on the connection. However, you can call
g_tls_connection_handshake() manually if you want to know for sure
whether the initial handshake succeeded or failed (as opposed to
just immediately trying to write to @conn's output stream, in which
case if it fails, it may not be possible to tell if it failed
before or after completing the handshake).
Likewise, on the server side, although a handshake is necessary at
the beginning of the communication, you do not need to call this
function explicitly unless you want clearer error reporting.
However, you may call g_tls_connection_handshake() later on to
renegotiate parameters (encryption methods, etc) with the client.
#GTlsConnection::accept_certificate may be emitted during the
handshake.
success or failure
a #GTlsConnection
a #GCancellable, or %NULL
Asynchronously performs a TLS handshake on @conn. See
g_tls_connection_handshake() for more information.
a #GTlsConnection
the <link linkend="io-priority">I/O priority</link> of the request.
a #GCancellable, or %NULL
callback to call when the handshake is complete
the data to pass to the callback function
Finish an asynchronous TLS handshake operation. See
g_tls_connection_handshake() for more information.
%TRUE on success, %FALSE on failure, in which case @error will be set.
a #GTlsConnection
a #GAsyncResult.
This sets the certificate that @conn will present to its peer
during the TLS handshake. For a #GTlsServerConnection, it is
mandatory to set this, and that will normally be done at construct
time.
For a #GTlsClientConnection, this is optional. If a handshake fails
with %G_TLS_ERROR_CERTIFICATE_REQUIRED, that means that the server
requires a certificate, and if you try connecting again, you should
call this method first. You can call
g_tls_client_connection_get_accepted_cas() on the failed connection
to get a list of Certificate Authorities that the server will
accept certificates from.
(It is also possible that a server will allow the connection with
or without a certificate; in that case, if you don't provide a
certificate, you can tell that the server requested one by the fact
that g_tls_client_connection_get_accepted_cas() will return
non-%NULL.)
a #GTlsConnection
the certificate to use for @conn
Sets the certificate database that is used to verify peer certificates.
This is set to the default database by default. See
g_tls_backend_get_default_database(). If set to %NULL, then
peer certificate validation will always set the
%G_TLS_CERTIFICATE_UNKNOWN_CA error (meaning
#GTlsConnection::accept-certificate will always be emitted on
client-side connections, unless that bit is not set in
#GTlsClientConnection:validation-flags).
a #GTlsConnection
a #GTlsDatabase
Set the object that will be used to interact with the user. It will be used
for things like prompting the user for passwords.
The @interaction argument will normally be a derived subclass of
#GTlsInteraction. %NULL can also be provided if no user interaction
should occur for this connection.
a connection
an interaction object, or %NULL
Sets how @conn behaves with respect to rehandshaking requests.
%G_TLS_REHANDSHAKE_NEVER means that it will never agree to
rehandshake after the initial handshake is complete. (For a client,
this means it will refuse rehandshake requests from the server, and
for a server, this means it will close the connection with an error
if the client attempts to rehandshake.)
%G_TLS_REHANDSHAKE_SAFELY means that the connection will allow a
rehandshake only if the other end of the connection supports the
TLS <literal>renegotiation_info</literal> extension. This is the
default behavior, but means that rehandshaking will not work
against older implementations that do not support that extension.
%G_TLS_REHANDSHAKE_UNSAFELY means that the connection will allow
rehandshaking even without the
<literal>renegotiation_info</literal> extension. On the server side
in particular, this is not recommended, since it leaves the server
open to certain attacks. However, this mode is necessary if you
need to allow renegotiation with older client software.
a #GTlsConnection
the rehandshaking mode
Sets whether or not @conn expects a proper TLS close notification
before the connection is closed. If this is %TRUE (the default),
then @conn will expect to receive a TLS close notification from its
peer before the connection is closed, and will return a
%G_TLS_ERROR_EOF error if the connection is closed without proper
notification (since this may indicate a network error, or
man-in-the-middle attack).
In some protocols, the application will know whether or not the
connection was closed cleanly based on application-level data
(because the application-level data includes a length field, or is
somehow self-delimiting); in this case, the close notify is
redundant and sometimes omitted. (TLS 1.1 explicitly allows this;
in TLS 1.0 it is technically an error, but often done anyway.) You
can use g_tls_connection_set_require_close_notify() to tell @conn
to allow an "unannounced" connection close, in which case the close
will show up as a 0-length read, as in a non-TLS
#GSocketConnection, and it is up to the application to check that
the data has been fully received.
Note that this only affects the behavior when the peer closes the
connection; when the application calls g_io_stream_close() itself
on @conn, this will send a close notification regardless of the
setting of this property. If you explicitly want to do an unclean
close, you can close @conn's #GTlsConnection:base-io-stream rather
than closing @conn itself.
a #GTlsConnection
whether or not to require close notification
Sets whether @conn uses the system certificate database to verify
peer certificates. This is %TRUE by default. If set to %FALSE, then
peer certificate validation will always set the
%G_TLS_CERTIFICATE_UNKNOWN_CA error (meaning
#GTlsConnection::accept-certificate will always be emitted on
client-side connections, unless that bit is not set in
#GTlsClientConnection:validation-flags).
a #GTlsConnection
whether to use the system certificate database
The #GIOStream that the connection wraps
The connection's certificate; see
g_tls_connection_set_certificate().
The certificate database to use when verifying this TLS connection.
If no cerificate database is set, then the default database will be
used. See g_tls_backend_get_default_database().
A #GTlsInteraction object to be used when the connection or certificate
database need to interact with the user. This will be used to prompt the
user for passwords where necessary.
The connection's peer's certificate, after the TLS handshake has
completed and the certificate has been accepted. Note in
particular that this is not yet set during the emission of
#GTlsConnection::accept-certificate.
(You can watch for a #GObject::notify signal on this property to
detect when a handshake has occurred.)
The errors noticed-and-ignored while verifying
#GTlsConnection:peer-certificate. Normally this should be 0, but
it may not be if #GTlsClientConnection:validation-flags is not
%G_TLS_CERTIFICATE_VALIDATE_ALL, or if
#GTlsConnection::accept-certificate overrode the default
behavior.
The rehandshaking mode. See
g_tls_connection_set_rehandshake_mode().
Whether or not proper TLS close notification is required.
See g_tls_connection_set_require_close_notify().
Whether or not the system certificate database will be used to
verify peer certificates. See
g_tls_connection_set_use_system_certdb().
Emitted during the TLS handshake after the peer certificate has
been received. You can examine @peer_cert's certification path by
calling g_tls_certificate_get_issuer() on it.
For a client-side connection, @peer_cert is the server's
certificate, and the signal will only be emitted if the
certificate was not acceptable according to @conn's
#GTlsClientConnection:validation_flags. If you would like the
certificate to be accepted despite @errors, return %TRUE from the
signal handler. Otherwise, if no handler accepts the certificate,
the handshake will fail with %G_TLS_ERROR_BAD_CERTIFICATE.
For a server-side connection, @peer_cert is the certificate
presented by the client, if this was requested via the server's
#GTlsServerConnection:authentication_mode. On the server side,
the signal is always emitted when the client presents a
certificate, and the certificate will only be accepted if a
handler returns %TRUE.
Note that if this signal is emitted as part of asynchronous I/O
in the main thread, then you should not attempt to interact with
the user before returning from the signal handler. If you want to
let the user decide whether or not to accept the certificate, you
would have to return %FALSE from the signal handler on the first
attempt, and then after the connection attempt returns a
%G_TLS_ERROR_HANDSHAKE, you can interact with the user, and if
the user decides to accept the certificate, remember that fact,
create a new connection, and return %TRUE from the signal handler
the next time.
If you are doing I/O in another thread, you do not
need to worry about this, and can simply block in the signal
handler until the UI thread returns an answer.
%TRUE to accept @peer_cert (which will also immediately end the signal emission). %FALSE to allow the signal emission to continue, which will cause the handshake to fail if no one else overrides it.
the peer's #GTlsCertificate
the problems with @peer_cert.
success or failure
a #GCancellable, or %NULL
the <link linkend="io-priority">I/O priority</link> of the request.
a #GCancellable, or %NULL
callback to call when the handshake is complete
the data to pass to the callback function
%TRUE on success, %FALSE on failure, in which case @error will be set.
a #GAsyncResult.
#GTlsDatabase is used to lookup certificates and other information
from a certificate or key store. It is an abstract base class which
TLS library specific subtypes override.
Most common client applications will not directly interact with
#GTlsDatabase. It is used internally by #GTlsConnection.
Create a handle string for the certificate. The database will only be able
to create a handle for certificates that originate from the database. In
cases where the database cannot create a handle for a certificate, %NULL
will be returned.
This handle should be stable across various instances of the application,
and between applications. If a certificate is modified in the database,
then it is not guaranteed that this handle will continue to point to it.
a newly allocated string containing the handle.
certificate for which to create a handle.
Lookup a certificate by its handle.
The handle should have been created by calling
g_tls_database_create_certificate_handle() on a #GTlsDatabase object of
the same TLS backend. The handle is designed to remain valid across
instantiations of the database.
If the handle is no longer valid, or does not point to a certificate in
this database, then %NULL will be returned.
This function can block, use g_tls_database_lookup_certificate_for_handle_async() to perform
the lookup operation asynchronously.
a newly allocated #GTlsCertificate, or %NULL. Use g_object_unref() to release the certificate.
a certificate handle
used to interact with the user if necessary
Flags which affect the lookup.
a #GCancellable, or %NULL
Asynchronously lookup a certificate by its handle in the database. See
g_tls_database_lookup_certificate_for_handle() for more information.
a certificate handle
used to interact with the user if necessary
Flags which affect the lookup.
a #GCancellable, or %NULL
callback to call when the operation completes
the data to pass to the callback function
Finish an asynchronous lookup of a certificate by its handle. See
g_tls_database_lookup_certificate_handle() for more information.
If the handle is no longer valid, or does not point to a certificate in
this database, then %NULL will be returned.
a newly allocated #GTlsCertificate object. Use g_object_unref() to release the certificate.
a #GAsyncResult.
Lookup the issuer of @certificate in the database.
The %issuer property
of @certificate is not modified, and the two certificates are not hooked
into a chain.
This function can block, use g_tls_database_lookup_certificate_issuer_async() to perform
the lookup operation asynchronously.
a newly allocated issuer #GTlsCertificate, or %NULL. Use g_object_unref() to release the certificate.
a #GTlsCertificate
used to interact with the user if necessary
flags which affect the lookup operation
a #GCancellable, or %NULL
Asynchronously lookup the issuer of @certificate in the database. See
g_tls_database_lookup_certificate_issuer() for more information.
a #GTlsCertificate
used to interact with the user if necessary
flags which affect the lookup operation
a #GCancellable, or %NULL
callback to call when the operation completes
the data to pass to the callback function
Finish an asynchronous lookup issuer operation. See
g_tls_database_lookup_certificate_issuer() for more information.
a newly allocated issuer #GTlsCertificate, or %NULL. Use g_object_unref() to release the certificate.
a #GAsyncResult.
Lookup certificates issued by this issuer in the database.
This function can block, use g_tls_database_lookup_certificates_issued_by_async() to perform
the lookup operation asynchronously.
a newly allocated list of #GTlsCertificate objects. Use g_object_unref() on each certificate, and g_list_free() on the release the list.
a #GByteArray which holds the DER encoded issuer DN.
used to interact with the user if necessary
Flags which affect the lookup operation.
a #GCancellable, or %NULL
Asynchronously lookup certificates issued by this issuer in the database. See
g_tls_database_lookup_certificates_issued_by() for more information.
The database may choose to hold a reference to the issuer byte array for the duration
of of this asynchronous operation. The byte array should not be modified during
this time.
a #GByteArray which holds the DER encoded issuer DN.
used to interact with the user if necessary
Flags which affect the lookup operation.
a #GCancellable, or %NULL
callback to call when the operation completes
the data to pass to the callback function
Finish an asynchronous lookup of certificates. See
g_tls_database_lookup_certificates_issued_by() for more information.
a newly allocated list of #GTlsCertificate objects. Use g_object_unref() on each certificate, and g_list_free() on the release the list.
a #GAsyncResult.
Verify's a certificate chain after looking up and adding any missing
certificates to the chain.
@chain is a chain of #GTlsCertificate objects each pointing to the next
certificate in the chain by its %issuer property. The chain may initially
consist of one or more certificates. After the verification process is
complete, @chain may be modified by adding missing certificates, or removing
extra certificates. If a certificate anchor was found, then it is added to
the @chain.
@purpose describes the purpose (or usage) for which the certificate
is being used. Typically @purpose will be set to #G_TLS_DATABASE_PURPOSE_AUTHENTICATE_SERVER
which means that the certificate is being used to authenticate a server
(and we are acting as the client).
The @identity is used to check for pinned certificates (trust exceptions)
in the database. These will override the normal verification process on a
host by host basis.
Currently there are no @flags, and %G_TLS_DATABASE_VERIFY_NONE should be
used.
This function can block, use g_tls_database_verify_chain_async() to perform
the verification operation asynchronously.
the appropriate #GTlsCertificateFlags which represents the result of verification.
a #GTlsCertificate chain
the purpose that this certificate chain will be used for.
the expected peer identity
used to interact with the user if necessary
additional verify flags
a #GCancellable, or %NULL
Asynchronously verify's a certificate chain after looking up and adding
any missing certificates to the chain. See g_tls_database_verify_chain()
for more information.
a #GTlsCertificate chain
the purpose that this certificate chain will be used for.
the expected peer identity
used to interact with the user if necessary
additional verify flags
a #GCancellable, or %NULL
callback to call when the operation completes
the data to pass to the callback function
Finish an asynchronous verify chain operation. See
g_tls_database_verify_chain() for more information. *
the appropriate #GTlsCertificateFlags which represents the result of verification.
a #GAsyncResult.
Create a handle string for the certificate. The database will only be able
to create a handle for certificates that originate from the database. In
cases where the database cannot create a handle for a certificate, %NULL
will be returned.
This handle should be stable across various instances of the application,
and between applications. If a certificate is modified in the database,
then it is not guaranteed that this handle will continue to point to it.
a newly allocated string containing the handle.
a #GTlsDatabase
certificate for which to create a handle.
Lookup a certificate by its handle.
The handle should have been created by calling
g_tls_database_create_certificate_handle() on a #GTlsDatabase object of
the same TLS backend. The handle is designed to remain valid across
instantiations of the database.
If the handle is no longer valid, or does not point to a certificate in
this database, then %NULL will be returned.
This function can block, use g_tls_database_lookup_certificate_for_handle_async() to perform
the lookup operation asynchronously.
a newly allocated #GTlsCertificate, or %NULL. Use g_object_unref() to release the certificate.
a #GTlsDatabase
a certificate handle
used to interact with the user if necessary
Flags which affect the lookup.
a #GCancellable, or %NULL
Asynchronously lookup a certificate by its handle in the database. See
g_tls_database_lookup_certificate_for_handle() for more information.
a #GTlsDatabase
a certificate handle
used to interact with the user if necessary
Flags which affect the lookup.
a #GCancellable, or %NULL
callback to call when the operation completes
the data to pass to the callback function
Finish an asynchronous lookup of a certificate by its handle. See
g_tls_database_lookup_certificate_handle() for more information.
If the handle is no longer valid, or does not point to a certificate in
this database, then %NULL will be returned.
a newly allocated #GTlsCertificate object. Use g_object_unref() to release the certificate.
a #GTlsDatabase
a #GAsyncResult.
Lookup the issuer of @certificate in the database.
The %issuer property
of @certificate is not modified, and the two certificates are not hooked
into a chain.
This function can block, use g_tls_database_lookup_certificate_issuer_async() to perform
the lookup operation asynchronously.
a newly allocated issuer #GTlsCertificate, or %NULL. Use g_object_unref() to release the certificate.
a #GTlsDatabase
a #GTlsCertificate
used to interact with the user if necessary
flags which affect the lookup operation
a #GCancellable, or %NULL
Asynchronously lookup the issuer of @certificate in the database. See
g_tls_database_lookup_certificate_issuer() for more information.
a #GTlsDatabase
a #GTlsCertificate
used to interact with the user if necessary
flags which affect the lookup operation
a #GCancellable, or %NULL
callback to call when the operation completes
the data to pass to the callback function
Finish an asynchronous lookup issuer operation. See
g_tls_database_lookup_certificate_issuer() for more information.
a newly allocated issuer #GTlsCertificate, or %NULL. Use g_object_unref() to release the certificate.
a #GTlsDatabase
a #GAsyncResult.
Lookup certificates issued by this issuer in the database.
This function can block, use g_tls_database_lookup_certificates_issued_by_async() to perform
the lookup operation asynchronously.
a newly allocated list of #GTlsCertificate objects. Use g_object_unref() on each certificate, and g_list_free() on the release the list.
a #GTlsDatabase
a #GByteArray which holds the DER encoded issuer DN.
used to interact with the user if necessary
Flags which affect the lookup operation.
a #GCancellable, or %NULL
Asynchronously lookup certificates issued by this issuer in the database. See
g_tls_database_lookup_certificates_issued_by() for more information.
The database may choose to hold a reference to the issuer byte array for the duration
of of this asynchronous operation. The byte array should not be modified during
this time.
a #GTlsDatabase
a #GByteArray which holds the DER encoded issuer DN.
used to interact with the user if necessary
Flags which affect the lookup operation.
a #GCancellable, or %NULL
callback to call when the operation completes
the data to pass to the callback function
Finish an asynchronous lookup of certificates. See
g_tls_database_lookup_certificates_issued_by() for more information.
a newly allocated list of #GTlsCertificate objects. Use g_object_unref() on each certificate, and g_list_free() on the release the list.
a #GTlsDatabase
a #GAsyncResult.
Verify's a certificate chain after looking up and adding any missing
certificates to the chain.
@chain is a chain of #GTlsCertificate objects each pointing to the next
certificate in the chain by its %issuer property. The chain may initially
consist of one or more certificates. After the verification process is
complete, @chain may be modified by adding missing certificates, or removing
extra certificates. If a certificate anchor was found, then it is added to
the @chain.
@purpose describes the purpose (or usage) for which the certificate
is being used. Typically @purpose will be set to #G_TLS_DATABASE_PURPOSE_AUTHENTICATE_SERVER
which means that the certificate is being used to authenticate a server
(and we are acting as the client).
The @identity is used to check for pinned certificates (trust exceptions)
in the database. These will override the normal verification process on a
host by host basis.
Currently there are no @flags, and %G_TLS_DATABASE_VERIFY_NONE should be
used.
This function can block, use g_tls_database_verify_chain_async() to perform
the verification operation asynchronously.
the appropriate #GTlsCertificateFlags which represents the result of verification.
a #GTlsDatabase
a #GTlsCertificate chain
the purpose that this certificate chain will be used for.
the expected peer identity
used to interact with the user if necessary
additional verify flags
a #GCancellable, or %NULL
Asynchronously verify's a certificate chain after looking up and adding
any missing certificates to the chain. See g_tls_database_verify_chain()
for more information.
a #GTlsDatabase
a #GTlsCertificate chain
the purpose that this certificate chain will be used for.
the expected peer identity
used to interact with the user if necessary
additional verify flags
a #GCancellable, or %NULL
callback to call when the operation completes
the data to pass to the callback function
Finish an asynchronous verify chain operation. See
g_tls_database_verify_chain() for more information. *
the appropriate #GTlsCertificateFlags which represents the result of verification.
a #GTlsDatabase
a #GAsyncResult.
the appropriate #GTlsCertificateFlags which represents the result of verification.
a #GTlsCertificate chain
the purpose that this certificate chain will be used for.
the expected peer identity
used to interact with the user if necessary
additional verify flags
a #GCancellable, or %NULL
a #GTlsCertificate chain
the purpose that this certificate chain will be used for.
the expected peer identity
used to interact with the user if necessary
additional verify flags
a #GCancellable, or %NULL
callback to call when the operation completes
the data to pass to the callback function
the appropriate #GTlsCertificateFlags which represents the result of verification.
a #GAsyncResult.
a newly allocated string containing the handle.
certificate for which to create a handle.
a newly allocated #GTlsCertificate, or %NULL. Use g_object_unref() to release the certificate.
a certificate handle
used to interact with the user if necessary
Flags which affect the lookup.
a #GCancellable, or %NULL
a certificate handle
used to interact with the user if necessary
Flags which affect the lookup.
a #GCancellable, or %NULL
callback to call when the operation completes
the data to pass to the callback function
a newly allocated #GTlsCertificate object. Use g_object_unref() to release the certificate.
a #GAsyncResult.
a newly allocated issuer #GTlsCertificate, or %NULL. Use g_object_unref() to release the certificate.
a #GTlsCertificate
used to interact with the user if necessary
flags which affect the lookup operation
a #GCancellable, or %NULL
a #GTlsCertificate
used to interact with the user if necessary
flags which affect the lookup operation
a #GCancellable, or %NULL
callback to call when the operation completes
the data to pass to the callback function
a newly allocated issuer #GTlsCertificate, or %NULL. Use g_object_unref() to release the certificate.
a #GAsyncResult.
a newly allocated list of #GTlsCertificate objects. Use g_object_unref() on each certificate, and g_list_free() on the release the list.
a #GByteArray which holds the DER encoded issuer DN.
used to interact with the user if necessary
Flags which affect the lookup operation.
a #GCancellable, or %NULL
a #GByteArray which holds the DER encoded issuer DN.
used to interact with the user if necessary
Flags which affect the lookup operation.
a #GCancellable, or %NULL
callback to call when the operation completes
the data to pass to the callback function
a newly allocated list of #GTlsCertificate objects. Use g_object_unref() on each certificate, and g_list_free() on the release the list.
a #GAsyncResult.
Flags for g_tls_database_lookup_certificate_handle(),
g_tls_database_lookup_certificate_issuer(),
and g_tls_database_lookup_certificates_issued_by().
No lookup flags
Restrict lookup to certificates that have a private key.
Flags for g_tls_database_verify_chain().
No verification flags
An error code used with %G_TLS_ERROR in a #GError returned from a
TLS-related routine.
No TLS provider is available
Miscellaneous TLS error
A certificate could not be parsed
The TLS handshake failed because the peer does not seem to be a TLS server.
The TLS handshake failed because the peer's certificate was not acceptable.
The TLS handshake failed because the server requested a client-side certificate, but none was provided. See g_tls_connection_set_certificate().
The TLS connection was closed without proper notice, which may indicate an attack. See g_tls_connection_set_require_close_notify().
Gets the TLS error quark.
a #GQuark.
#GTlsFileDatabase is implemented by #GTlsDatabase objects which load
their certificate information from a file. It is an interface which
TLS library specific subtypes implement.
Creates a new #GTlsFileDatabase which uses anchor certificate authorities
in @anchors to verify certificate chains.
The certificates in @anchors must be PEM encoded.
the new #GTlsFileDatabase, or %NULL on error
filename of anchor certificate authorities.
The path to a file containing PEM encoded certificate authority
root anchors. The certificates in this file will be treated as
root authorities for the purpose of verifying other certificates
via the g_tls_database_verify_chain() operation.
Provides an interface for #GTlsFileDatabase implementations.
#GTlsInteraction provides a mechanism for the TLS connection and database
code to interact with the user. It can be used to ask the user for passwords.
To use a #GTlsInteraction with a TLS connection use
g_tls_connection_set_interaction().
Callers should instantiate a derived class that implements the various
interaction methods to show the required dialogs.
Callers should use the 'invoke' functions like
g_tls_interaction_invoke_ask_password() to run interaction methods. These
functions make sure that the interaction is invoked in the main loop
and not in the current thread, if the current thread is not running the
main loop.
Derived classes can choose to implement whichever interactions methods they'd
like to support by overriding those virtual methods in their class
initialization function. Any interactions not implemented will return
%G_TLS_INTERACTION_UNHANDLED. If a derived class implements an async method,
it must also implement the corresponding finish method.
Run synchronous interaction to ask the user for a password. In general,
g_tls_interaction_invoke_ask_password() should be used instead of this
function.
Derived subclasses usually implement a password prompt, although they may
also choose to provide a password from elsewhere. The @password value will
be filled in and then @callback will be called. Alternatively the user may
abort this password request, which will usually abort the TLS connection.
If the interaction is cancelled by the cancellation object, or by the
user then %G_TLS_INTERACTION_FAILED will be returned with an error that
contains a %G_IO_ERROR_CANCELLED error code. Certain implementations may
not support immediate cancellation.
The status of the ask password interaction.
a #GTlsPassword object
an optional #GCancellable cancellation object
Run asynchronous interaction to ask the user for a password. In general,
g_tls_interaction_invoke_ask_password() should be used instead of this
function.
Derived subclasses usually implement a password prompt, although they may
also choose to provide a password from elsewhere. The @password value will
be filled in and then @callback will be called. Alternatively the user may
abort this password request, which will usually abort the TLS connection.
If the interaction is cancelled by the cancellation object, or by the
user then %G_TLS_INTERACTION_FAILED will be returned with an error that
contains a %G_IO_ERROR_CANCELLED error code. Certain implementations may
not support immediate cancellation.
Certain implementations may not support immediate cancellation.
a #GTlsPassword object
an optional #GCancellable cancellation object
will be called when the interaction completes
data to pass to the @callback
Complete an ask password user interaction request. This should be once
the g_tls_interaction_ask_password_async() completion callback is called.
If %G_TLS_INTERACTION_HANDLED is returned, then the #GTlsPassword passed
to g_tls_interaction_ask_password() will have its password filled in.
If the interaction is cancelled by the cancellation object, or by the
user then %G_TLS_INTERACTION_FAILED will be returned with an error that
contains a %G_IO_ERROR_CANCELLED error code.
The status of the ask password interaction.
the result passed to the callback
Run synchronous interaction to ask the user for a password. In general,
g_tls_interaction_invoke_ask_password() should be used instead of this
function.
Derived subclasses usually implement a password prompt, although they may
also choose to provide a password from elsewhere. The @password value will
be filled in and then @callback will be called. Alternatively the user may
abort this password request, which will usually abort the TLS connection.
If the interaction is cancelled by the cancellation object, or by the
user then %G_TLS_INTERACTION_FAILED will be returned with an error that
contains a %G_IO_ERROR_CANCELLED error code. Certain implementations may
not support immediate cancellation.
The status of the ask password interaction.
a #GTlsInteraction object
a #GTlsPassword object
an optional #GCancellable cancellation object
Run asynchronous interaction to ask the user for a password. In general,
g_tls_interaction_invoke_ask_password() should be used instead of this
function.
Derived subclasses usually implement a password prompt, although they may
also choose to provide a password from elsewhere. The @password value will
be filled in and then @callback will be called. Alternatively the user may
abort this password request, which will usually abort the TLS connection.
If the interaction is cancelled by the cancellation object, or by the
user then %G_TLS_INTERACTION_FAILED will be returned with an error that
contains a %G_IO_ERROR_CANCELLED error code. Certain implementations may
not support immediate cancellation.
Certain implementations may not support immediate cancellation.
a #GTlsInteraction object
a #GTlsPassword object
an optional #GCancellable cancellation object
will be called when the interaction completes
data to pass to the @callback
Complete an ask password user interaction request. This should be once
the g_tls_interaction_ask_password_async() completion callback is called.
If %G_TLS_INTERACTION_HANDLED is returned, then the #GTlsPassword passed
to g_tls_interaction_ask_password() will have its password filled in.
If the interaction is cancelled by the cancellation object, or by the
user then %G_TLS_INTERACTION_FAILED will be returned with an error that
contains a %G_IO_ERROR_CANCELLED error code.
The status of the ask password interaction.
a #GTlsInteraction object
the result passed to the callback
Invoke the interaction to ask the user for a password. It invokes this
interaction in the main loop, specifically the #GMainContext returned by
g_main_context_get_thread_default() when the interaction is created. This
is called by called by #GTlsConnection or #GTlsDatabase to ask the user
for a password.
Derived subclasses usually implement a password prompt, although they may
also choose to provide a password from elsewhere. The @password value will
be filled in and then @callback will be called. Alternatively the user may
abort this password request, which will usually abort the TLS connection.
The implementation can either be a synchronous (eg: modal dialog) or an
asynchronous one (eg: modeless dialog). This function will take care of
calling which ever one correctly.
If the interaction is cancelled by the cancellation object, or by the
user then %G_TLS_INTERACTION_FAILED will be returned with an error that
contains a %G_IO_ERROR_CANCELLED error code. Certain implementations may
not support immediate cancellation.
The status of the ask password interaction.
a #GTlsInteraction object
a #GTlsPassword object
an optional #GCancellable cancellation object
The class for #GTlsInteraction. Derived classes implement the various
virtual interaction methods to handle TLS interactions.
Derived classes can choose to implement whichever interactions methods they'd
like to support by overriding those virtual methods in their class
initialization function. If a derived class implements an async method,
it must also implement the corresponding finish method.
The synchronous interaction methods should implement to display modal dialogs,
and the asynchronous methods to display modeless dialogs.
If the user cancels an interaction, then the result should be
%G_TLS_INTERACTION_FAILED and the error should be set with a domain of
%G_IO_ERROR and code of %G_IO_ERROR_CANCELLED.
The status of the ask password interaction.
a #GTlsPassword object
an optional #GCancellable cancellation object
a #GTlsPassword object
an optional #GCancellable cancellation object
will be called when the interaction completes
data to pass to the @callback
The status of the ask password interaction.
the result passed to the callback
#GTlsInteractionResult is returned by various functions in #GTlsInteraction
when finishing an interaction request.
The interaction was unhandled (i.e. not implemented).
The interaction completed, and resulting data is available.
The interaction has failed, or was cancelled. and the operation should be aborted.
Holds a password used in TLS.
Create a new #GTlsPassword object.
The newly allocated password object
the password flags
description of what the password is for
Get the password value. If @length is not %NULL then it will be
filled in with the length of the password value. (Note that the
password value is not nul-terminated, so you can only pass %NULL
for @length in contexts where you know the password will have a
certain fixed length.)
The password value (owned by the password object).
location to place the length of the password.
Provide the value for this password.
The @value will be owned by the password object, and later freed using
the @destroy function callback.
Specify the @length, for a non-nul-terminated password. Pass -1 as
@length if using a nul-terminated password, and @length will be
calculated automatically. (Note that the terminating nul is not
considered part of the password in this case.)
the value for the password
the length of the password, or -1
a function to use to free the password.
Get a description string about what the password will be used for.
The description of the password.
a #GTlsPassword object
Get flags about the password.
The flags about the password.
a #GTlsPassword object
Get the password value. If @length is not %NULL then it will be
filled in with the length of the password value. (Note that the
password value is not nul-terminated, so you can only pass %NULL
for @length in contexts where you know the password will have a
certain fixed length.)
The password value (owned by the password object).
a #GTlsPassword object
location to place the length of the password.
Get a user readable translated warning. Usually this warning is a
representation of the password flags returned from
g_tls_password_get_flags().
The warning.
a #GTlsPassword object
Set a description string about what the password will be used for.
a #GTlsPassword object
The description of the password
Set flags about the password.
a #GTlsPassword object
The flags about the password
Set the value for this password. The @value will be copied by the password
object.
Specify the @length, for a non-nul-terminated password. Pass -1 as
@length if using a nul-terminated password, and @length will be
calculated automatically. (Note that the terminating nul is not
considered part of the password in this case.)
a #GTlsPassword object
the new password value
the length of the password, or -1
Provide the value for this password.
The @value will be owned by the password object, and later freed using
the @destroy function callback.
Specify the @length, for a non-nul-terminated password. Pass -1 as
@length if using a nul-terminated password, and @length will be
calculated automatically. (Note that the terminating nul is not
considered part of the password in this case.)
a #GTlsPassword object
the value for the password
the length of the password, or -1
a function to use to free the password.
Set a user readable translated warning. Usually this warning is a
representation of the password flags returned from
g_tls_password_get_flags().
a #GTlsPassword object
The user readable warning
The password value (owned by the password object).
location to place the length of the password.
the value for the password
the length of the password, or -1
a function to use to free the password.
Various flags for the password.
No flags
The password was wrong, and the user should retry.
Hint to the user that the password has been wrong many times, and the user may not have many chances left.
Hint to the user that this is the last try to get this password right.
When to allow rehandshaking. See
g_tls_connection_set_rehandshake_mode().
Never allow rehandshaking
Allow safe rehandshaking only
Allow unsafe rehandshaking
#GTlsServerConnection is the server-side subclass of #GTlsConnection,
representing a server-side TLS connection.
Creates a new #GTlsServerConnection wrapping @base_io_stream (which
must have pollable input and output streams).
the new #GTlsServerConnection, or %NULL on error
the #GIOStream to wrap
the default server certificate, or %NULL
The #GTlsAuthenticationMode for the server. This can be changed
before calling g_tls_connection_handshake() if you want to
rehandshake with a different mode from the initial handshake.
This #GSocketControlMessage contains a #GCredentials instance. It
may be sent using g_socket_send_message() and received using
g_socket_receive_message() over UNIX sockets (ie: sockets in the
%G_SOCKET_FAMILY_UNIX family).
For an easier way to send and receive credentials over
stream-oriented UNIX sockets, see
g_unix_connection_send_credentials() and
g_unix_connection_receive_credentials(). To receive credentials of
a foreign process connected to a socket, use
g_socket_get_credentials().
A #GUnixFDList contains a list of file descriptors. It owns the file
descriptors that it contains, closing them when finalized.
It may be wrapped in a #GUnixFDMessage and sent over a #GSocket in
the %G_SOCKET_ADDRESS_UNIX family by using g_socket_send_message()
and received using g_socket_receive_message().
Note that <filename><gio/gunixfdlist.h></filename> belongs to
the UNIX-specific GIO interfaces, thus you have to use the
<filename>gio-unix-2.0.pc</filename> pkg-config file when using it.
The type of name used by a #GUnixSocketAddress.
%G_UNIX_SOCKET_ADDRESS_PATH indicates a traditional unix domain
socket bound to a filesystem path. %G_UNIX_SOCKET_ADDRESS_ANONYMOUS
indicates a socket not bound to any name (eg, a client-side socket,
or a socket created with socketpair()).
For abstract sockets, there are two incompatible ways of naming
them; the man pages suggest using the entire <literal>struct
sockaddr_un</literal> as the name, padding the unused parts of the
%sun_path field with zeroes; this corresponds to
%G_UNIX_SOCKET_ADDRESS_ABSTRACT_PADDED. However, many programs
instead just use a portion of %sun_path, and pass an appropriate
smaller length to bind() or connect(). This is
%G_UNIX_SOCKET_ADDRESS_ABSTRACT.
invalid
anonymous
a filesystem path
an abstract name
an abstract name, 0-padded to the full length of a unix socket name
Extension point for #GVfs functionality.
See <link linkend="extending-gio">Extending GIO</link>.
The string used to obtain the volume <emphasis>class</emphasis>
with g_volume_get_identifier().
Known volume classes include <literal>device</literal> and
<literal>network</literal>. Other classes may be added in the
future.
This is intended to be used by applications to classify #GVolume
instances into different sections - for example a file manager or
file chooser can use this information to show
<literal>network</literal> volumes under a "Network" heading and
<literal>device</literal> volumes under a "Devices" heading.
The string used to obtain a Hal UDI with g_volume_get_identifier().
The string used to obtain a filesystem label with g_volume_get_identifier().
The string used to obtain a NFS mount with g_volume_get_identifier().
The string used to obtain a Unix device path with g_volume_get_identifier().
The string used to obtain a UUID with g_volume_get_identifier().
Extension point for volume monitor functionality.
See <link linkend="extending-gio">Extending GIO</link>.
Entry point for using GIO functionality.
Gets the default #GVfs for the system.
a #GVfs.
Gets the local #GVfs for the system.
a #GVfs.
Gets a #GFile for @path.
a #GFile. Free the returned object with g_object_unref().
a string containing a VFS path.
Gets a #GFile for @uri.
This operation never fails, but the returned object
might not support any I/O operation if the URI
is malformed or if the URI scheme is not supported.
a #GFile. Free the returned object with g_object_unref().
a string containing a URI
Gets a list of URI schemes supported by @vfs.
a %NULL-terminated array of strings. The returned array belongs to GIO and must not be freed or modified.
Checks if the VFS is active.
%TRUE if construction of the @vfs was successful and it is now active.
This operation never fails, but the returned object might
not support any I/O operations if the @parse_name cannot
be parsed by the #GVfs module.
a #GFile for the given @parse_name. Free the returned object with g_object_unref().
a string to be parsed by the VFS module.
Gets a #GFile for @path.
a #GFile. Free the returned object with g_object_unref().
a #GVfs.
a string containing a VFS path.
Gets a #GFile for @uri.
This operation never fails, but the returned object
might not support any I/O operation if the URI
is malformed or if the URI scheme is not supported.
a #GFile. Free the returned object with g_object_unref().
a#GVfs.
a string containing a URI
Gets a list of URI schemes supported by @vfs.
a %NULL-terminated array of strings. The returned array belongs to GIO and must not be freed or modified.
a #GVfs.
Checks if the VFS is active.
%TRUE if construction of the @vfs was successful and it is now active.
a #GVfs.
This operation never fails, but the returned object might
not support any I/O operations if the @parse_name cannot
be parsed by the #GVfs module.
a #GFile for the given @parse_name. Free the returned object with g_object_unref().
a #GVfs.
a string to be parsed by the VFS module.
%TRUE if construction of the @vfs was successful and it is now active.
a #GFile. Free the returned object with g_object_unref().
a string containing a VFS path.
a #GFile. Free the returned object with g_object_unref().
a string containing a URI
a %NULL-terminated array of strings. The returned array belongs to GIO and must not be freed or modified.
a #GFile for the given @parse_name. Free the returned object with g_object_unref().
a string to be parsed by the VFS module.
The #GVolume interface represents user-visible objects that can be
mounted. Note, when porting from GnomeVFS, #GVolume is the moral
equivalent of #GnomeVFSDrive.
Mounting a #GVolume instance is an asynchronous operation. For more
information about asynchronous operations, see #GAsyncResult and
#GTask. To mount a #GVolume, first call g_volume_mount() with (at
least) the #GVolume instance, optionally a #GMountOperation object
and a #GAsyncReadyCallback.
Typically, one will only want to pass %NULL for the
#GMountOperation if automounting all volumes when a desktop session
starts since it's not desirable to put up a lot of dialogs asking
for credentials.
The callback will be fired when the operation has resolved (either
with success or failure), and a #GAsyncReady structure will be
passed to the callback. That callback should then call
g_volume_mount_finish() with the #GVolume instance and the
#GAsyncReady data to see if the operation was completed
successfully. If an @error is present when g_volume_mount_finish()
is called, then it will be filled with any error information.
<para id="volume-identifier">
It is sometimes necessary to directly access the underlying
operating system object behind a volume (e.g. for passing a volume
to an application via the commandline). For this purpose, GIO
allows to obtain an 'identifier' for the volume. There can be
different kinds of identifiers, such as Hal UDIs, filesystem labels,
traditional Unix devices (e.g. <filename>/dev/sda2</filename>),
uuids. GIO uses predefind strings as names for the different kinds
of identifiers: #G_VOLUME_IDENTIFIER_KIND_HAL_UDI,
#G_VOLUME_IDENTIFIER_KIND_LABEL, etc. Use g_volume_get_identifier()
to obtain an identifier for a volume.
</para>
Note that #G_VOLUME_IDENTIFIER_KIND_HAL_UDI will only be available
when the gvfs hal volume monitor is in use. Other volume monitors
will generally be able to provide the #G_VOLUME_IDENTIFIER_KIND_UNIX_DEVICE
identifier, which can be used to obtain a hal device by means of
libhal_manager_find_device_string_match().
Checks if a volume can be ejected.
%TRUE if the @volume can be ejected. %FALSE otherwise.
Checks if a volume can be mounted.
%TRUE if the @volume can be mounted. %FALSE otherwise.
Ejects a volume. This is an asynchronous operation, and is
finished by calling g_volume_eject_finish() with the @volume
and #GAsyncResult returned in the @callback.
flags affecting the unmount if required for eject
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback, or %NULL.
user data that gets passed to @callback
Finishes ejecting a volume. If any errors occurred during the operation,
@error will be set to contain the errors and %FALSE will be returned.
%TRUE, %FALSE if operation failed.
a #GAsyncResult.
Ejects a volume. This is an asynchronous operation, and is
finished by calling g_volume_eject_with_operation_finish() with the @volume
and #GAsyncResult data returned in the @callback.
flags affecting the unmount if required for eject
a #GMountOperation or %NULL to avoid user interaction.
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback, or %NULL.
user data passed to @callback.
Finishes ejecting a volume. If any errors occurred during the operation,
@error will be set to contain the errors and %FALSE will be returned.
%TRUE if the volume was successfully ejected. %FALSE otherwise.
a #GAsyncResult.
Gets the kinds of <link linkend="volume-identifier">identifiers</link>
that @volume has. Use g_volume_get_identifier() to obtain
the identifiers themselves.
a %NULL-terminated array of strings containing kinds of identifiers. Use g_strfreev() to free.
Gets the activation root for a #GVolume if it is known ahead of
mount time. Returns %NULL otherwise. If not %NULL and if @volume
is mounted, then the result of g_mount_get_root() on the
#GMount object obtained from g_volume_get_mount() will always
either be equal or a prefix of what this function returns. In
other words, in code
<programlisting>
GMount *mount;
GFile *mount_root
GFile *volume_activation_root;
mount = g_volume_get_mount (volume); /* mounted, so never NULL */
mount_root = g_mount_get_root (mount);
volume_activation_root = g_volume_get_activation_root(volume); /* assume not NULL */
</programlisting>
then the expression
<programlisting>
(g_file_has_prefix (volume_activation_root, mount_root) ||
g_file_equal (volume_activation_root, mount_root))
</programlisting>
will always be %TRUE.
Activation roots are typically used in #GVolumeMonitor
implementations to find the underlying mount to shadow, see
g_mount_is_shadowed() for more details.
the activation root of @volume or %NULL. Use g_object_unref() to free.
Gets the drive for the @volume.
a #GDrive or %NULL if @volume is not associated with a drive. The returned object should be unreffed with g_object_unref() when no longer needed.
Gets the icon for @volume.
a #GIcon. The returned object should be unreffed with g_object_unref() when no longer needed.
Gets the identifier of the given kind for @volume.
See the <link linkend="volume-identifier">introduction</link>
for more information about volume identifiers.
a newly allocated string containing the requested identfier, or %NULL if the #GVolume doesn't have this kind of identifier
the kind of identifier to return
Gets the mount for the @volume.
a #GMount or %NULL if @volume isn't mounted. The returned object should be unreffed with g_object_unref() when no longer needed.
Gets the name of @volume.
the name for the given @volume. The returned string should be freed with g_free() when no longer needed.
Gets the sort key for @volume, if any.
Sorting key for @volume or %NULL if no such key is available.
Gets the symbolic icon for @volume.
a #GIcon. The returned object should be unreffed with g_object_unref() when no longer needed.
Gets the UUID for the @volume. The reference is typically based on
the file system UUID for the volume in question and should be
considered an opaque string. Returns %NULL if there is no UUID
available.
the UUID for @volume or %NULL if no UUID can be computed. The returned string should be freed with g_free() when no longer needed.
Finishes mounting a volume. If any errors occurred during the operation,
@error will be set to contain the errors and %FALSE will be returned.
If the mount operation succeeded, g_volume_get_mount() on @volume
is guaranteed to return the mount right after calling this
function; there's no need to listen for the 'mount-added' signal on
#GVolumeMonitor.
%TRUE, %FALSE if operation failed.
a #GAsyncResult
Mounts a volume. This is an asynchronous operation, and is
finished by calling g_volume_mount_finish() with the @volume
and #GAsyncResult returned in the @callback.
flags affecting the operation
a #GMountOperation or %NULL to avoid user interaction.
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback, or %NULL.
user data that gets passed to @callback
Returns whether the volume should be automatically mounted.
%TRUE if the volume should be automatically mounted.
Checks if a volume can be ejected.
%TRUE if the @volume can be ejected. %FALSE otherwise.
a #GVolume.
Checks if a volume can be mounted.
%TRUE if the @volume can be mounted. %FALSE otherwise.
a #GVolume.
Ejects a volume. This is an asynchronous operation, and is
finished by calling g_volume_eject_finish() with the @volume
and #GAsyncResult returned in the @callback.
a #GVolume.
flags affecting the unmount if required for eject
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback, or %NULL.
user data that gets passed to @callback
Finishes ejecting a volume. If any errors occurred during the operation,
@error will be set to contain the errors and %FALSE will be returned.
%TRUE, %FALSE if operation failed.
pointer to a #GVolume.
a #GAsyncResult.
Ejects a volume. This is an asynchronous operation, and is
finished by calling g_volume_eject_with_operation_finish() with the @volume
and #GAsyncResult data returned in the @callback.
a #GVolume.
flags affecting the unmount if required for eject
a #GMountOperation or %NULL to avoid user interaction.
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback, or %NULL.
user data passed to @callback.
Finishes ejecting a volume. If any errors occurred during the operation,
@error will be set to contain the errors and %FALSE will be returned.
%TRUE if the volume was successfully ejected. %FALSE otherwise.
a #GVolume.
a #GAsyncResult.
Gets the kinds of <link linkend="volume-identifier">identifiers</link>
that @volume has. Use g_volume_get_identifier() to obtain
the identifiers themselves.
a %NULL-terminated array of strings containing kinds of identifiers. Use g_strfreev() to free.
a #GVolume
Gets the activation root for a #GVolume if it is known ahead of
mount time. Returns %NULL otherwise. If not %NULL and if @volume
is mounted, then the result of g_mount_get_root() on the
#GMount object obtained from g_volume_get_mount() will always
either be equal or a prefix of what this function returns. In
other words, in code
<programlisting>
GMount *mount;
GFile *mount_root
GFile *volume_activation_root;
mount = g_volume_get_mount (volume); /* mounted, so never NULL */
mount_root = g_mount_get_root (mount);
volume_activation_root = g_volume_get_activation_root(volume); /* assume not NULL */
</programlisting>
then the expression
<programlisting>
(g_file_has_prefix (volume_activation_root, mount_root) ||
g_file_equal (volume_activation_root, mount_root))
</programlisting>
will always be %TRUE.
Activation roots are typically used in #GVolumeMonitor
implementations to find the underlying mount to shadow, see
g_mount_is_shadowed() for more details.
the activation root of @volume or %NULL. Use g_object_unref() to free.
a #GVolume
Gets the drive for the @volume.
a #GDrive or %NULL if @volume is not associated with a drive. The returned object should be unreffed with g_object_unref() when no longer needed.
a #GVolume.
Gets the icon for @volume.
a #GIcon. The returned object should be unreffed with g_object_unref() when no longer needed.
a #GVolume.
Gets the identifier of the given kind for @volume.
See the <link linkend="volume-identifier">introduction</link>
for more information about volume identifiers.
a newly allocated string containing the requested identfier, or %NULL if the #GVolume doesn't have this kind of identifier
a #GVolume
the kind of identifier to return
Gets the mount for the @volume.
a #GMount or %NULL if @volume isn't mounted. The returned object should be unreffed with g_object_unref() when no longer needed.
a #GVolume.
Gets the name of @volume.
the name for the given @volume. The returned string should be freed with g_free() when no longer needed.
a #GVolume.
Gets the sort key for @volume, if any.
Sorting key for @volume or %NULL if no such key is available.
A #GVolume.
Gets the symbolic icon for @volume.
a #GIcon. The returned object should be unreffed with g_object_unref() when no longer needed.
a #GVolume.
Gets the UUID for the @volume. The reference is typically based on
the file system UUID for the volume in question and should be
considered an opaque string. Returns %NULL if there is no UUID
available.
the UUID for @volume or %NULL if no UUID can be computed. The returned string should be freed with g_free() when no longer needed.
a #GVolume.
Mounts a volume. This is an asynchronous operation, and is
finished by calling g_volume_mount_finish() with the @volume
and #GAsyncResult returned in the @callback.
a #GVolume.
flags affecting the operation
a #GMountOperation or %NULL to avoid user interaction.
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback, or %NULL.
user data that gets passed to @callback
Finishes mounting a volume. If any errors occurred during the operation,
@error will be set to contain the errors and %FALSE will be returned.
If the mount operation succeeded, g_volume_get_mount() on @volume
is guaranteed to return the mount right after calling this
function; there's no need to listen for the 'mount-added' signal on
#GVolumeMonitor.
%TRUE, %FALSE if operation failed.
a #GVolume
a #GAsyncResult
Returns whether the volume should be automatically mounted.
%TRUE if the volume should be automatically mounted.
a #GVolume
Emitted when the volume has been changed.
This signal is emitted when the #GVolume have been removed. If
the recipient is holding references to the object they should
release them so the object can be finalized.
Interface for implementing operations for mountable volumes.
the name for the given @volume. The returned string should be freed with g_free() when no longer needed.
a #GIcon. The returned object should be unreffed with g_object_unref() when no longer needed.
the UUID for @volume or %NULL if no UUID can be computed. The returned string should be freed with g_free() when no longer needed.
a #GDrive or %NULL if @volume is not associated with a drive. The returned object should be unreffed with g_object_unref() when no longer needed.
a #GMount or %NULL if @volume isn't mounted. The returned object should be unreffed with g_object_unref() when no longer needed.
%TRUE if the @volume can be mounted. %FALSE otherwise.
%TRUE if the @volume can be ejected. %FALSE otherwise.
flags affecting the operation
a #GMountOperation or %NULL to avoid user interaction.
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback, or %NULL.
user data that gets passed to @callback
%TRUE, %FALSE if operation failed.
a #GAsyncResult
flags affecting the unmount if required for eject
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback, or %NULL.
user data that gets passed to @callback
%TRUE, %FALSE if operation failed.
a #GAsyncResult.
a newly allocated string containing the requested identfier, or %NULL if the #GVolume doesn't have this kind of identifier
the kind of identifier to return
a %NULL-terminated array of strings containing kinds of identifiers. Use g_strfreev() to free.
%TRUE if the volume should be automatically mounted.
the activation root of @volume or %NULL. Use g_object_unref() to free.
flags affecting the unmount if required for eject
a #GMountOperation or %NULL to avoid user interaction.
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback, or %NULL.
user data passed to @callback.
%TRUE if the volume was successfully ejected. %FALSE otherwise.
a #GAsyncResult.
Sorting key for @volume or %NULL if no such key is available.
a #GIcon. The returned object should be unreffed with g_object_unref() when no longer needed.
#GVolumeMonitor is for listing the user interesting devices and volumes
on the computer. In other words, what a file selector or file manager
would show in a sidebar.
#GVolumeMonitor is not <link
linkend="g-main-context-push-thread-default">thread-default-context
aware</link>, and so should not be used other than from the main
thread, with no thread-default-context active.
This function should be called by any #GVolumeMonitor
implementation when a new #GMount object is created that is not
associated with a #GVolume object. It must be called just before
emitting the @mount_added signal.
If the return value is not %NULL, the caller must associate the
returned #GVolume object with the #GMount. This involves returning
it in its g_mount_get_volume() implementation. The caller must
also listen for the "removed" signal on the returned object
and give up its reference when handling that signal
Similary, if implementing g_volume_monitor_adopt_orphan_mount(),
the implementor must take a reference to @mount and return it in
its g_volume_get_mount() implemented. Also, the implementor must
listen for the "unmounted" signal on @mount and give up its
reference upon handling that signal.
There are two main use cases for this function.
One is when implementing a user space file system driver that reads
blocks of a block device that is already represented by the native
volume monitor (for example a CD Audio file system driver). Such
a driver will generate its own #GMount object that needs to be
associated with the #GVolume object that represents the volume.
The other is for implementing a #GVolumeMonitor whose sole purpose
is to return #GVolume objects representing entries in the users
"favorite servers" list or similar.
the #GVolume object that is the parent for @mount or %NULL if no wants to adopt the #GMount.
a #GMount object to find a parent for
Gets the volume monitor used by gio.
a reference to the #GVolumeMonitor used by gio. Call g_object_unref() when done with it.
Gets a list of drives connected to the system.
The returned list should be freed with g_list_free(), after
its elements have been unreffed with g_object_unref().
a #GList of connected #GDrive objects.
Finds a #GMount object by its UUID (see g_mount_get_uuid())
a #GMount or %NULL if no such mount is available. Free the returned object with g_object_unref().
the UUID to look for
Gets a list of the mounts on the system.
The returned list should be freed with g_list_free(), after
its elements have been unreffed with g_object_unref().
a #GList of #GMount objects.
Finds a #GVolume object by its UUID (see g_volume_get_uuid())
a #GVolume or %NULL if no such volume is available. Free the returned object with g_object_unref().
the UUID to look for
Gets a list of the volumes on the system.
The returned list should be freed with g_list_free(), after
its elements have been unreffed with g_object_unref().
a #GList of #GVolume objects.
Gets a list of drives connected to the system.
The returned list should be freed with g_list_free(), after
its elements have been unreffed with g_object_unref().
a #GList of connected #GDrive objects.
a #GVolumeMonitor.
Finds a #GMount object by its UUID (see g_mount_get_uuid())
a #GMount or %NULL if no such mount is available. Free the returned object with g_object_unref().
a #GVolumeMonitor.
the UUID to look for
Gets a list of the mounts on the system.
The returned list should be freed with g_list_free(), after
its elements have been unreffed with g_object_unref().
a #GList of #GMount objects.
a #GVolumeMonitor.
Finds a #GVolume object by its UUID (see g_volume_get_uuid())
a #GVolume or %NULL if no such volume is available. Free the returned object with g_object_unref().
a #GVolumeMonitor.
the UUID to look for
Gets a list of the volumes on the system.
The returned list should be freed with g_list_free(), after
its elements have been unreffed with g_object_unref().
a #GList of #GVolume objects.
a #GVolumeMonitor.
Emitted when a drive changes.
the drive that changed
Emitted when a drive is connected to the system.
a #GDrive that was connected.
Emitted when a drive is disconnected from the system.
a #GDrive that was disconnected.
Emitted when the eject button is pressed on @drive.
the drive where the eject button was pressed
Emitted when the stop button is pressed on @drive.
the drive where the stop button was pressed
Emitted when a mount is added.
a #GMount that was added.
Emitted when a mount changes.
a #GMount that changed.
Emitted when a mount is about to be removed.
a #GMount that is being unmounted.
Emitted when a mount is removed.
a #GMount that was removed.
Emitted when a mountable volume is added to the system.
a #GVolume that was added.
Emitted when mountable volume is changed.
a #GVolume that changed.
Emitted when a mountable volume is removed from the system.
a #GVolume that was removed.
a #GList of connected #GDrive objects.
a #GList of #GVolume objects.
a #GList of #GMount objects.
a #GVolume or %NULL if no such volume is available. Free the returned object with g_object_unref().
the UUID to look for
a #GMount or %NULL if no such mount is available. Free the returned object with g_object_unref().
the UUID to look for
Zlib decompression
Creates a new #GZlibCompressor.
a new #GZlibCompressor
The format to use for the compressed data
compression level (0-9), -1 for default
Returns the #GZlibCompressor:file-info property.
a #GFileInfo, or %NULL
a #GZlibCompressor
Sets @file_info in @compressor. If non-%NULL, and @compressor's
#GZlibCompressor:format property is %G_ZLIB_COMPRESSOR_FORMAT_GZIP,
it will be used to set the file name and modification time in
the GZIP header of the compressed data.
Note: it is an error to call this function while a compression is in
progress; it may only be called immediately after creation of @compressor,
or after resetting it with g_converter_reset().
a #GZlibCompressor
a #GFileInfo
If set to a non-%NULL #GFileInfo object, and #GZlibCompressor:format is
%G_ZLIB_COMPRESSOR_FORMAT_GZIP, the compressor will write the file name
and modification time from the file info to the GZIP header.
Used to select the type of data format to use for #GZlibDecompressor
and #GZlibCompressor.
deflate compression with zlib header
gzip file format
deflate compression with no header
Zlib decompression
Creates a new #GZlibDecompressor.
a new #GZlibDecompressor
The format to use for the compressed data
Retrieves the #GFileInfo constructed from the GZIP header data
of compressed data processed by @compressor, or %NULL if @decompressor's
#GZlibDecompressor:format property is not %G_ZLIB_COMPRESSOR_FORMAT_GZIP,
or the header data was not fully processed yet, or it not present in the
data stream at all.
a #GFileInfo, or %NULL
a #GZlibDecompressor
A #GFileInfo containing the information found in the GZIP header
of the data stream processed, or %NULL if the header was not yet
fully processed, is not present at all, or the compressor's
#GZlibDecompressor:format property is not %G_ZLIB_COMPRESSOR_FORMAT_GZIP.
Checks if @action_name is valid.
@action_name is valid if it consists only of alphanumeric characters,
plus '-' and '.'. The empty string is not a valid action name.
It is an error to call this function with a non-utf8 @action_name.
@action_name must not be %NULL.
%TRUE if @action_name is valid
an potential action name
Parses a detailed action name into its separate name and target
components.
Detailed action names can have three formats.
The first format is used to represent an action name with no target
value and consists of just an action name containing no whitespace
nor the characters ':', '(' or ')'. For example: "app.action".
The second format is used to represent an action with a target value
that is a non-empty string consisting only of alphanumerics, plus '-'
and '.'. In that case, the action name and target value are
separated by a double colon ("::"). For example:
"app.action::target".
The third format is used to represent an action with any type of
target value, including strings. The target value follows the action
name, surrounded in parens. For example: "app.action(42)". The
target value is parsed using g_variant_parse(). If a tuple-typed
value is desired, it must be specified in the same way, resulting in
two sets of parens, for example: "app.action((1,2,3))". A string
target can be specified this way as well: "app.action('target')".
For strings, this third format must be used if * target value is
empty or contains characters other than alphanumerics, '-' and '.'.
%TRUE if successful, else %FALSE with @error set
a detailed action name
the action name
the target value, or %NULL for no target
Formats a detailed action name from @action_name and @target_value.
It is an error to call this function with an invalid action name.
This function is the opposite of
g_action_parse_detailed_action_name(). It will produce a string that
can be parsed back to the @action_name and @target_value by that
function.
See that function for the types of strings that will be printed by
this function.
a detailed format string
a valid action name
Creates a new #GAppInfo from the given information.
Note that for @commandline, the quoting rules of the Exec key of the
<ulink url="http://freedesktop.org/Standards/desktop-entry-spec">freedesktop.org Desktop
Entry Specification</ulink> are applied. For example, if the @commandline contains
percent-encoded URIs, the percent-character must be doubled in order to prevent it from
being swallowed by Exec key unquoting. See the specification for exact quoting rules.
new #GAppInfo for given command.
the commandline to use
the application name, or %NULL to use @commandline
flags that can specify details of the created #GAppInfo
Gets a list of all of the applications currently registered
on this system.
For desktop files, this includes applications that have
<literal>NoDisplay=true</literal> set or are excluded from
display by means of <literal>OnlyShowIn</literal> or
<literal>NotShowIn</literal>. See g_app_info_should_show().
The returned list does not include applications which have
the <literal>Hidden</literal> key set.
a newly allocated #GList of references to #GAppInfo<!---->s.
Gets a list of all #GAppInfos for a given content type,
including the recommended and fallback #GAppInfos. See
g_app_info_get_recommended_for_type() and
g_app_info_get_fallback_for_type().
#GList of #GAppInfos for given @content_type or %NULL on error.
the content type to find a #GAppInfo for
Gets the default #GAppInfo for a given content type.
#GAppInfo for given @content_type or %NULL on error.
the content type to find a #GAppInfo for
if %TRUE, the #GAppInfo is expected to support URIs
Gets the default application for handling URIs with
the given URI scheme. A URI scheme is the initial part
of the URI, up to but not including the ':', e.g. "http",
"ftp" or "sip".
#GAppInfo for given @uri_scheme or %NULL on error.
a string containing a URI scheme.
Gets a list of fallback #GAppInfos for a given content type, i.e.
those applications which claim to support the given content type
by MIME type subclassing and not directly.
#GList of #GAppInfos for given @content_type or %NULL on error.
the content type to find a #GAppInfo for
Gets a list of recommended #GAppInfos for a given content type, i.e.
those applications which claim to support the given content type exactly,
and not by MIME type subclassing.
Note that the first application of the list is the last used one, i.e.
the last one for which g_app_info_set_as_last_used_for_type() has been
called.
#GList of #GAppInfos for given @content_type or %NULL on error.
the content type to find a #GAppInfo for
Utility function that launches the default application
registered to handle the specified uri. Synchronous I/O
is done on the uri to detect the type of the file if
required.
%TRUE on success, %FALSE on error.
the uri to show
an optional #GAppLaunchContext.
Removes all changes to the type associations done by
g_app_info_set_as_default_for_type(),
g_app_info_set_as_default_for_extension(),
g_app_info_add_supports_type() or
g_app_info_remove_supports_type().
a content type
Helper function for constructing #GAsyncInitable object. This is
similar to g_object_newv() but also initializes the object asynchronously.
When the initialization is finished, @callback will be called. You can
then call g_async_initable_new_finish() to get the new object and check
for any errors.
a #GType supporting #GAsyncInitable.
the number of parameters in @parameters
the parameters to use to construct the object
the <link linkend="io-priority">I/O priority</link> of the operation.
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback to call when the initialization is finished
the data to pass to callback function
Asynchronously connects to the message bus specified by @bus_type.
When the operation is finished, @callback will be invoked. You can
then call g_bus_get_finish() to get the result of the operation.
This is a asynchronous failable function. See g_bus_get_sync() for
the synchronous version.
A #GBusType.
A #GCancellable or %NULL.
A #GAsyncReadyCallback to call when the request is satisfied.
The data to pass to @callback.
Finishes an operation started with g_bus_get().
The returned object is a singleton, that is, shared with other
callers of g_bus_get() and g_bus_get_sync() for @bus_type. In the
event that you need a private message bus connection, use
g_dbus_address_get_for_bus_sync() and
g_dbus_connection_new_for_address().
Note that the returned #GDBusConnection object will (usually) have
the #GDBusConnection:exit-on-close property set to %TRUE.
A #GDBusConnection or %NULL if @error is set. Free with g_object_unref().
A #GAsyncResult obtained from the #GAsyncReadyCallback passed to g_bus_get().
Synchronously connects to the message bus specified by @bus_type.
Note that the returned object may shared with other callers,
e.g. if two separate parts of a process calls this function with
the same @bus_type, they will share the same object.
This is a synchronous failable function. See g_bus_get() and
g_bus_get_finish() for the asynchronous version.
The returned object is a singleton, that is, shared with other
callers of g_bus_get() and g_bus_get_sync() for @bus_type. In the
event that you need a private message bus connection, use
g_dbus_address_get_for_bus_sync() and
g_dbus_connection_new_for_address().
Note that the returned #GDBusConnection object will (usually) have
the #GDBusConnection:exit-on-close property set to %TRUE.
A #GDBusConnection or %NULL if @error is set. Free with g_object_unref().
A #GBusType.
A #GCancellable or %NULL.
Starts acquiring @name on the bus specified by @bus_type and calls
@name_acquired_handler and @name_lost_handler when the name is
acquired respectively lost. Callbacks will be invoked in the <link
linkend="g-main-context-push-thread-default">thread-default main
loop</link> of the thread you are calling this function from.
You are guaranteed that one of the @name_acquired_handler and @name_lost_handler
callbacks will be invoked after calling this function - there are three
possible cases:
<itemizedlist>
<listitem><para>
@name_lost_handler with a %NULL connection (if a connection to the bus can't be made).
</para></listitem>
<listitem><para>
@bus_acquired_handler then @name_lost_handler (if the name can't be obtained)
</para></listitem>
<listitem><para>
@bus_acquired_handler then @name_acquired_handler (if the name was obtained).
</para></listitem>
</itemizedlist>
When you are done owning the name, just call g_bus_unown_name()
with the owner id this function returns.
If the name is acquired or lost (for example another application
could acquire the name if you allow replacement or the application
currently owning the name exits), the handlers are also invoked. If the
#GDBusConnection that is used for attempting to own the name
closes, then @name_lost_handler is invoked since it is no
longer possible for other processes to access the process.
You cannot use g_bus_own_name() several times for the same name (unless
interleaved with calls to g_bus_unown_name()) - only the first call
will work.
Another guarantee is that invocations of @name_acquired_handler
and @name_lost_handler are guaranteed to alternate; that
is, if @name_acquired_handler is invoked then you are
guaranteed that the next time one of the handlers is invoked, it
will be @name_lost_handler. The reverse is also true.
If you plan on exporting objects (using e.g.
g_dbus_connection_register_object()), note that it is generally too late
to export the objects in @name_acquired_handler. Instead, you can do this
in @bus_acquired_handler since you are guaranteed that this will run
before @name is requested from the bus.
This behavior makes it very simple to write applications that wants
to own names and export objects, see <xref linkend="gdbus-owning-names"/>.
Simply register objects to be exported in @bus_acquired_handler and
unregister the objects (if any) in @name_lost_handler.
An identifier (never 0) that an be used with g_bus_unown_name() to stop owning the name.
The type of bus to own a name on.
The well-known name to own.
A set of flags from the #GBusNameOwnerFlags enumeration.
Handler to invoke when connected to the bus of type @bus_type or %NULL.
Handler to invoke when @name is acquired or %NULL.
Handler to invoke when @name is lost or %NULL.
User data to pass to handlers.
Function for freeing @user_data or %NULL.
Like g_bus_own_name() but takes a #GDBusConnection instead of a
#GBusType.
An identifier (never 0) that an be used with g_bus_unown_name() to stop owning the name.
A #GDBusConnection.
The well-known name to own.
A set of flags from the #GBusNameOwnerFlags enumeration.
Handler to invoke when @name is acquired or %NULL.
Handler to invoke when @name is lost or %NULL.
User data to pass to handlers.
Function for freeing @user_data or %NULL.
Version of g_bus_own_name_on_connection() using closures instead of callbacks for
easier binding in other languages.
An identifier (never 0) that an be used with g_bus_unown_name() to stop owning the name.
A #GDBusConnection.
The well-known name to own.
A set of flags from the #GBusNameOwnerFlags enumeration.
#GClosure to invoke when @name is acquired or %NULL.
#GClosure to invoke when @name is lost or %NULL.
Version of g_bus_own_name() using closures instead of callbacks for
easier binding in other languages.
An identifier (never 0) that an be used with g_bus_unown_name() to stop owning the name.
The type of bus to own a name on.
The well-known name to own.
A set of flags from the #GBusNameOwnerFlags enumeration.
#GClosure to invoke when connected to the bus of type @bus_type or %NULL.
#GClosure to invoke when @name is acquired or %NULL.
#GClosure to invoke when @name is lost or %NULL.
Stops owning a name.
An identifier obtained from g_bus_own_name()
Stops watching a name.
An identifier obtained from g_bus_watch_name()
Starts watching @name on the bus specified by @bus_type and calls
@name_appeared_handler and @name_vanished_handler when the name is
known to have a owner respectively known to lose its
owner. Callbacks will be invoked in the <link
linkend="g-main-context-push-thread-default">thread-default main
loop</link> of the thread you are calling this function from.
You are guaranteed that one of the handlers will be invoked after
calling this function. When you are done watching the name, just
call g_bus_unwatch_name() with the watcher id this function
returns.
If the name vanishes or appears (for example the application owning
the name could restart), the handlers are also invoked. If the
#GDBusConnection that is used for watching the name disconnects, then
@name_vanished_handler is invoked since it is no longer
possible to access the name.
Another guarantee is that invocations of @name_appeared_handler
and @name_vanished_handler are guaranteed to alternate; that
is, if @name_appeared_handler is invoked then you are
guaranteed that the next time one of the handlers is invoked, it
will be @name_vanished_handler. The reverse is also true.
This behavior makes it very simple to write applications that wants
to take action when a certain name exists, see <xref
linkend="gdbus-watching-names"/>. Basically, the application
should create object proxies in @name_appeared_handler and destroy
them again (if any) in @name_vanished_handler.
An identifier (never 0) that an be used with g_bus_unwatch_name() to stop watching the name.
The type of bus to watch a name on.
The name (well-known or unique) to watch.
Flags from the #GBusNameWatcherFlags enumeration.
Handler to invoke when @name is known to exist or %NULL.
Handler to invoke when @name is known to not exist or %NULL.
User data to pass to handlers.
Function for freeing @user_data or %NULL.
Like g_bus_watch_name() but takes a #GDBusConnection instead of a
#GBusType.
An identifier (never 0) that an be used with g_bus_unwatch_name() to stop watching the name.
A #GDBusConnection.
The name (well-known or unique) to watch.
Flags from the #GBusNameWatcherFlags enumeration.
Handler to invoke when @name is known to exist or %NULL.
Handler to invoke when @name is known to not exist or %NULL.
User data to pass to handlers.
Function for freeing @user_data or %NULL.
Version of g_bus_watch_name_on_connection() using closures instead of callbacks for
easier binding in other languages.
An identifier (never 0) that an be used with g_bus_unwatch_name() to stop watching the name.
A #GDBusConnection.
The name (well-known or unique) to watch.
Flags from the #GBusNameWatcherFlags enumeration.
#GClosure to invoke when @name is known to exist or %NULL.
#GClosure to invoke when @name is known to not exist or %NULL.
Version of g_bus_watch_name() using closures instead of callbacks for
easier binding in other languages.
An identifier (never 0) that an be used with g_bus_unwatch_name() to stop watching the name.
The type of bus to watch a name on.
The name (well-known or unique) to watch.
Flags from the #GBusNameWatcherFlags enumeration.
#GClosure to invoke when @name is known to exist or %NULL.
#GClosure to invoke when @name is known to not exist or %NULL.
Checks if a content type can be executable. Note that for instance
things like text files can be executables (i.e. scripts and batch files).
%TRUE if the file type corresponds to a type that can be executable, %FALSE otherwise.
a content type string
Compares two content types for equality.
%TRUE if the two strings are identical or equivalent, %FALSE otherwise.
a content type string
a content type string
Tries to find a content type based on the mime type name.
Newly allocated string with content type or %NULL. Free with g_free()
a mime type string
Gets the human readable description of the content type.
a short description of the content type @type. Free the returned string with g_free()
a content type string
Gets the generic icon name for a content type.
See the <ulink url="http://www.freedesktop.org/wiki/Specifications/shared-mime-info-spec">shared-mime-info</ulink>
specification for more on the generic icon name.
the registered generic icon name for the given @type, or %NULL if unknown. Free with g_free()
a content type string
Gets the icon for a content type.
#GIcon corresponding to the content type. Free the returned object with g_object_unref()
a content type string
Gets the mime type for the content type, if one is registered.
the registered mime type for the given @type, or %NULL if unknown.
a content type string
Gets the symbolic icon for a content type.
symbolic #GIcon corresponding to the content type. Free the returned object with g_object_unref()
a content type string
Guesses the content type based on example data. If the function is
uncertain, @result_uncertain will be set to %TRUE. Either @filename
or @data may be %NULL, in which case the guess will be based solely
on the other argument.
a string indicating a guessed content type for the given data. Free with g_free()
a string, or %NULL
a stream of data, or %NULL
the size of @data
return location for the certainty of the result, or %NULL
Tries to guess the type of the tree with root @root, by
looking at the files it contains. The result is an array
of content types, with the best guess coming first.
The types returned all have the form x-content/foo, e.g.
x-content/audio-cdda (for audio CDs) or x-content/image-dcf
(for a camera memory card). See the <ulink url="http://www.freedesktop.org/wiki/Specifications/shared-mime-info-spec">shared-mime-info</ulink>
specification for more on x-content types.
This function is useful in the implementation of
g_mount_guess_content_type().
an %NULL-terminated array of zero or more content types. Free with g_strfreev()
the root of the tree to guess a type for
Determines if @type is a subset of @supertype.
%TRUE if @type is a kind of @supertype, %FALSE otherwise.
a content type string
a content type string
Checks if the content type is the generic "unknown" type.
On UNIX this is the "application/octet-stream" mimetype,
while on win32 it is "*".
%TRUE if the type is the unknown type.
a content type string
Gets a list of strings containing all the registered content types
known to the system. The list and its data should be freed using
<programlisting>
g_list_free_full (list, g_free);
</programlisting>
#GList of the registered content types
Escape @string so it can appear in a D-Bus address as the value
part of a key-value pair.
For instance, if @string is <code>/run/bus-for-:0</code>,
this function would return <code>/run/bus-for-%3A0</code>,
which could be used in a D-Bus address like
<code>unix:nonce-tcp:host=127.0.0.1,port=42,noncefile=/run/bus-for-%3A0</code>.
a copy of @string with all non-optionally-escaped bytes escaped
an unescaped string to be included in a D-Bus address as the value in a key-value pair
Synchronously looks up the D-Bus address for the well-known message
bus instance specified by @bus_type. This may involve using various
platform specific mechanisms.
A valid D-Bus address string for @bus_type or %NULL if @error is set.
A #GBusType.
A #GCancellable or %NULL.
Asynchronously connects to an endpoint specified by @address and
sets up the connection so it is in a state to run the client-side
of the D-Bus authentication conversation.
When the operation is finished, @callback will be invoked. You can
then call g_dbus_address_get_stream_finish() to get the result of
the operation.
This is an asynchronous failable function. See
g_dbus_address_get_stream_sync() for the synchronous version.
A valid D-Bus address.
A #GCancellable or %NULL.
A #GAsyncReadyCallback to call when the request is satisfied.
Data to pass to @callback.
Finishes an operation started with g_dbus_address_get_stream().
A #GIOStream or %NULL if @error is set.
A #GAsyncResult obtained from the GAsyncReadyCallback passed to g_dbus_address_get_stream().
%NULL or return location to store the GUID extracted from @address, if any.
Synchronously connects to an endpoint specified by @address and
sets up the connection so it is in a state to run the client-side
of the D-Bus authentication conversation.
This is a synchronous failable function. See
g_dbus_address_get_stream() for the asynchronous version.
A #GIOStream or %NULL if @error is set.
A valid D-Bus address.
%NULL or return location to store the GUID extracted from @address, if any.
A #GCancellable or %NULL.
Looks up the value of an annotation.
The cost of this function is O(n) in number of annotations.
The value or %NULL if not found. Do not free, it is owned by @annotations.
A %NULL-terminated array of annotations or %NULL.
The name of the annotation to look up.
Creates a D-Bus error name to use for @error. If @error matches
a registered error (cf. g_dbus_error_register_error()), the corresponding
D-Bus error name will be returned.
Otherwise the a name of the form
<literal>org.gtk.GDBus.UnmappedGError.Quark._ESCAPED_QUARK_NAME.Code_ERROR_CODE</literal>
will be used. This allows other GDBus applications to map the error
on the wire back to a #GError using g_dbus_error_new_for_dbus_error().
This function is typically only used in object mappings to put a
#GError on the wire. Regular applications should not use it.
A D-Bus error name (never %NULL). Free with g_free().
A #GError.
Gets the D-Bus error name used for @error, if any.
This function is guaranteed to return a D-Bus error name for all
#GError<!-- -->s returned from functions handling remote method
calls (e.g. g_dbus_connection_call_finish()) unless
g_dbus_error_strip_remote_error() has been used on @error.
An allocated string or %NULL if the D-Bus error name could not be found. Free with g_free().
A #GError.
Checks if @error represents an error received via D-Bus from a remote peer. If so,
use g_dbus_error_get_remote_error() to get the name of the error.
%TRUE if @error represents an error from a remote peer, %FALSE otherwise.
A #GError.
Creates a #GError based on the contents of @dbus_error_name and
@dbus_error_message.
Errors registered with g_dbus_error_register_error() will be looked
up using @dbus_error_name and if a match is found, the error domain
and code is used. Applications can use g_dbus_error_get_remote_error()
to recover @dbus_error_name.
If a match against a registered error is not found and the D-Bus
error name is in a form as returned by g_dbus_error_encode_gerror()
the error domain and code encoded in the name is used to
create the #GError. Also, @dbus_error_name is added to the error message
such that it can be recovered with g_dbus_error_get_remote_error().
Otherwise, a #GError with the error code %G_IO_ERROR_DBUS_ERROR
in the #G_IO_ERROR error domain is returned. Also, @dbus_error_name is
added to the error message such that it can be recovered with
g_dbus_error_get_remote_error().
In all three cases, @dbus_error_name can always be recovered from the
returned #GError using the g_dbus_error_get_remote_error() function
(unless g_dbus_error_strip_remote_error() hasn't been used on the returned error).
This function is typically only used in object mappings to prepare
#GError instances for applications. Regular applications should not use
it.
An allocated #GError. Free with g_error_free().
D-Bus error name.
D-Bus error message.
Creates an association to map between @dbus_error_name and
#GError<!-- -->s specified by @error_domain and @error_code.
This is typically done in the routine that returns the #GQuark for
an error domain.
%TRUE if the association was created, %FALSE if it already exists.
A #GQuark for a error domain.
An error code.
A D-Bus error name.
Helper function for associating a #GError error domain with D-Bus error names.
The error domain name.
A pointer where to store the #GQuark.
A pointer to @num_entries #GDBusErrorEntry struct items.
Number of items to register.
Looks for extra information in the error message used to recover
the D-Bus error name and strips it if found. If stripped, the
message field in @error will correspond exactly to what was
received on the wire.
This is typically used when presenting errors to the end user.
%TRUE if information was stripped, %FALSE otherwise.
A #GError.
Destroys an association previously set up with g_dbus_error_register_error().
%TRUE if the association was destroyed, %FALSE if it wasn't found.
A #GQuark for a error domain.
An error code.
A D-Bus error name.
Generate a D-Bus GUID that can be used with
e.g. g_dbus_connection_new().
See the D-Bus specification regarding what strings are valid D-Bus
GUID (for example, D-Bus GUIDs are not RFC-4122 compliant).
A valid D-Bus GUID. Free with g_free().
Converts a #GValue to a #GVariant of the type indicated by the @type parameter.
The conversion is using the following rules:
<table frame='all'>
<title>#GValue / #GVariant conversion rules</title>
<tgroup cols='2' align='left' colsep='1' rowsep='1'>
<thead>
<row>
<entry>If the #GType for @gvalue is...</entry>
<entry>... then @type must be</entry>
</row>
</thead>
<tbody>
<row>
<entry>#G_TYPE_STRING</entry>
<entry><link linkend="G-VARIANT-TYPE-STRING:CAPS">'s'</link>, <link linkend="G-VARIANT-TYPE-OBJECT-PATH:CAPS">'o'</link>, <link linkend="G-VARIANT-TYPE-SIGNATURE:CAPS">'g'</link> or <link linkend="G-VARIANT-TYPE-BYTESTRING:CAPS">'ay'</link></entry>
</row>
<row>
<entry>#G_TYPE_STRV</entry>
<entry><link linkend="G-VARIANT-TYPE-STRING-ARRAY:CAPS">'as'</link>, <link linkend="G-VARIANT-TYPE-OBJECT-PATH-ARRAY:CAPS">'ao'</link> or <link linkend="G-VARIANT-TYPE-BYTESTRING-ARRAY:CAPS">'aay'</link></entry>
</row>
<row>
<entry>#G_TYPE_BOOLEAN</entry>
<entry><link linkend="G-VARIANT-TYPE-BOOLEAN:CAPS">'b'</link></entry>
</row>
<row>
<entry>#G_TYPE_UCHAR</entry>
<entry><link linkend="G-VARIANT-TYPE-BYTE:CAPS">'y'</link></entry>
</row>
<row>
<entry>#G_TYPE_INT</entry>
<entry><link linkend="G-VARIANT-TYPE-INT32:CAPS">'i'</link> or <link linkend="G-VARIANT-TYPE-INT16:CAPS">'n'</link></entry>
</row>
<row>
<entry>#G_TYPE_UINT</entry>
<entry><link linkend="G-VARIANT-TYPE-UINT32:CAPS">'u'</link> or <link linkend="G-VARIANT-TYPE-UINT16:CAPS">'q'</link></entry>
</row>
<row>
<entry>#G_TYPE_INT64</entry>
<entry><link linkend="G-VARIANT-TYPE-INT64:CAPS">'x'</link></entry>
</row>
<row>
<entry>#G_TYPE_UINT64</entry>
<entry><link linkend="G-VARIANT-TYPE-UINT64:CAPS">'t'</link></entry>
</row>
<row>
<entry>#G_TYPE_DOUBLE</entry>
<entry><link linkend="G-VARIANT-TYPE-DOUBLE:CAPS">'d'</link></entry>
</row>
<row>
<entry>#G_TYPE_VARIANT</entry>
<entry>Any #GVariantType</entry>
</row>
</tbody>
</tgroup>
</table>
This can fail if e.g. @gvalue is of type #G_TYPE_STRING and @type
is <link linkend="G-VARIANT-TYPE-INT32:CAPS">'i'</link>. It will
also fail for any #GType (including e.g. #G_TYPE_OBJECT and
#G_TYPE_BOXED derived-types) not in the table above.
Note that if @gvalue is of type #G_TYPE_VARIANT and its value is
%NULL, the <emphasis>empty</emphasis> #GVariant instance (never
%NULL) for @type is returned (e.g. 0 for scalar types, the empty
string for string types, <literal>'/'</literal> for object path
types, the empty array for any array type and so on).
See the g_dbus_gvariant_to_gvalue() function for how to convert a
#GVariant to a #GValue.
A #GVariant (never floating) of #GVariantType @type holding the data from @gvalue or %NULL in case of failure. Free with g_variant_unref().
A #GValue to convert to a #GVariant.
A #GVariantType.
Converts a #GVariant to a #GValue. If @value is floating, it is consumed.
The rules specified in the g_dbus_gvalue_to_gvariant() function are
used - this function is essentially its reverse form.
The conversion never fails - a valid #GValue is always returned in
@out_gvalue.
A #GVariant.
Return location pointing to a zero-filled (uninitialized) #GValue.
Checks if @string is a D-Bus address.
This doesn't check if @string is actually supported by #GDBusServer
or #GDBusConnection - use g_dbus_is_supported_address() to do more
checks.
%TRUE if @string is a valid D-Bus address, %FALSE otherwise.
A string.
Checks if @string is a D-Bus GUID.
See the D-Bus specification regarding what strings are valid D-Bus
GUID (for example, D-Bus GUIDs are not RFC-4122 compliant).
%TRUE if @string is a guid, %FALSE otherwise.
The string to check.
Checks if @string is a valid D-Bus interface name.
%TRUE if valid, %FALSE otherwise.
The string to check.
Checks if @string is a valid D-Bus member (e.g. signal or method) name.
%TRUE if valid, %FALSE otherwise.
The string to check.
Checks if @string is a valid D-Bus bus name (either unique or well-known).
%TRUE if valid, %FALSE otherwise.
The string to check.
Like g_dbus_is_address() but also checks if the library suppors the
transports in @string and that key/value pairs for each transport
are valid.
%TRUE if @string is a valid D-Bus address that is supported by this library, %FALSE if @error is set.
A string.
Checks if @string is a valid D-Bus unique bus name.
%TRUE if valid, %FALSE otherwise.
The string to check.
Creates a #GFile with the given argument from the command line.
The value of @arg can be either a URI, an absolute path or a
relative path resolved relative to the current working directory.
This operation never fails, but the returned object might not
support any I/O operation if @arg points to a malformed path.
a new #GFile. Free the returned object with g_object_unref().
a command line string
Creates a #GFile with the given argument from the command line.
This function is similar to g_file_new_for_commandline_arg() except
that it allows for passing the current working directory as an
argument instead of using the current working directory of the
process.
This is useful if the commandline argument was given in a context
other than the invocation of the current process.
See also g_application_command_line_create_file_for_arg().
a new #GFile
a command line string
the current working directory of the commandline
Constructs a #GFile for a given path. This operation never
fails, but the returned object might not support any I/O
operation if @path is malformed.
a new #GFile for the given @path. Free the returned object with g_object_unref().
a string containing a relative or absolute path. The string must be encoded in the glib filename encoding.
Constructs a #GFile for a given URI. This operation never
fails, but the returned object might not support any I/O
operation if @uri is malformed or if the uri type is
not supported.
a new #GFile for the given @uri. Free the returned object with g_object_unref().
a UTF-8 string containing a URI
Opens a file in the preferred directory for temporary files (as
returned by g_get_tmp_dir()) and returns a #GFile and
#GFileIOStream pointing to it.
@tmpl should be a string in the GLib file name encoding
containing a sequence of six 'X' characters, and containing no
directory components. If it is %NULL, a default template is used.
Unlike the other #GFile constructors, this will return %NULL if
a temporary file could not be created.
a new #GFile. Free the returned object with g_object_unref().
Template for the file name, as in g_file_open_tmp(), or %NULL for a default template
on return, a #GFileIOStream for the created file
Constructs a #GFile with the given @parse_name (i.e. something
given by g_file_get_parse_name()). This operation never fails,
but the returned object might not support any I/O operation if
the @parse_name cannot be parsed.
a new #GFile.
a file name or path to be parsed
Deserializes a #GIcon previously serialized using g_icon_serialize().
a #GIcon, or %NULL when deserialization fails.
a #GVariant created with g_icon_serialize()
Gets a hash for an icon.
a #guint containing a hash for the @icon, suitable for use in a #GHashTable or similar data structure.
#gconstpointer to an icon object.
Generate a #GIcon instance from @str. This function can fail if
@str is not valid - see g_icon_to_string() for discussion.
If your application or library provides one or more #GIcon
implementations you need to ensure that each #GType is registered
with the type system prior to calling g_icon_new_for_string().
An object implementing the #GIcon interface or %NULL if @error is set.
A string obtained via g_icon_to_string().
Helper function for constructing #GInitable object. This is
similar to g_object_newv() but also initializes the object
and returns %NULL, setting an error on failure.
a newly allocated #GObject, or %NULL on error
a #GType supporting #GInitable.
the number of parameters in @parameters
the parameters to use to construct the object
optional #GCancellable object, %NULL to ignore.
Converts errno.h error codes into GIO error codes.
#GIOErrorEnum value for the given errno.h error number.
Error number as defined in errno.h.
Converts some common error codes into GIO error codes. The
fallback value G_IO_ERROR_FAILED is returned for error codes not
handled.
#GIOErrorEnum value for the given error number.
Windows error number.
Gets the GIO Error Quark.
a #GQuark.
Registers @type as extension for the extension point with name
@extension_point_name.
If @type has already been registered as an extension for this
extension point, the existing #GIOExtension object is returned.
a #GIOExtension object for #GType
the name of the extension point
the #GType to register as extension
the name for the extension
the priority for the extension
Looks up an existing extension point.
the #GIOExtensionPoint, or %NULL if there is no registered extension point with the given name.
the name of the extension point
Registers an extension point.
the new #GIOExtensionPoint. This object is owned by GIO and should not be freed.
The name of the extension point
Loads all the modules in the specified directory.
If don't require all modules to be initialized (and thus registering
all gtypes) then you can use g_io_modules_scan_all_in_directory()
which allows delayed/lazy loading of modules.
a list of #GIOModules loaded from the directory, All the modules are loaded into memory, if you want to unload them (enabling on-demand loading) you must call g_type_module_unuse() on all the modules. Free the list with g_list_free().
pathname for a directory containing modules to load.
Loads all the modules in the specified directory.
If don't require all modules to be initialized (and thus registering
all gtypes) then you can use g_io_modules_scan_all_in_directory()
which allows delayed/lazy loading of modules.
a list of #GIOModules loaded from the directory, All the modules are loaded into memory, if you want to unload them (enabling on-demand loading) you must call g_type_module_unuse() on all the modules. Free the list with g_list_free().
pathname for a directory containing modules to load.
a scope to use when scanning the modules.
Scans all the modules in the specified directory, ensuring that
any extension point implemented by a module is registered.
This may not actually load and initialize all the types in each
module, some modules may be lazily loaded and initialized when
an extension point it implementes is used with e.g.
g_io_extension_point_get_extensions() or
g_io_extension_point_get_extension_by_name().
If you need to guarantee that all types are loaded in all the modules,
use g_io_modules_load_all_in_directory().
pathname for a directory containing modules to scan.
Scans all the modules in the specified directory, ensuring that
any extension point implemented by a module is registered.
This may not actually load and initialize all the types in each
module, some modules may be lazily loaded and initialized when
an extension point it implementes is used with e.g.
g_io_extension_point_get_extensions() or
g_io_extension_point_get_extension_by_name().
If you need to guarantee that all types are loaded in all the modules,
use g_io_modules_load_all_in_directory().
pathname for a directory containing modules to scan.
a scope to use when scanning the modules
Cancels all cancellable I/O jobs.
A job is cancellable if a #GCancellable was passed into
g_io_scheduler_push_job().
Schedules the I/O job to run in another thread.
@notify will be called on @user_data after @job_func has returned,
regardless whether the job was cancelled or has run to completion.
If @cancellable is not %NULL, it can be used to cancel the I/O job
by calling g_cancellable_cancel() or by calling
g_io_scheduler_cancel_all_jobs().
a #GIOSchedulerJobFunc.
data to pass to @job_func
a #GDestroyNotify for @user_data, or %NULL
the <link linkend="io-priority">I/O priority</link> of the request.
optional #GCancellable object, %NULL to ignore.
Gets the default #GNetworkMonitor for the system.
a #GNetworkMonitor
Initializes the platform networking libraries (eg, on Windows, this
calls WSAStartup()). GLib will call this itself if it is needed, so
you only need to call it if you directly call system networking
functions (without calling any GLib networking functions first).
Utility method for #GPollableInputStream and #GPollableOutputStream
implementations. Creates a new #GSource that expects a callback of
type #GPollableSourceFunc. The new source does not actually do
anything on its own; use g_source_add_child_source() to add other
sources to it to cause it to trigger.
the new #GSource.
the stream associated with the new source
Utility method for #GPollableInputStream and #GPollableOutputStream
implementations. Creates a new #GSource, as with
g_pollable_source_new(), but also attaching @child_source (with a
dummy callback), and @cancellable, if they are non-%NULL.
the new #GSource.
the stream associated with the new source
optional child source to attach
optional #GCancellable to attach
Tries to read from @stream, as with g_input_stream_read() (if
@blocking is %TRUE) or g_pollable_input_stream_read_nonblocking()
(if @blocking is %FALSE). This can be used to more easily share
code between blocking and non-blocking implementations of a method.
If @blocking is %FALSE, then @stream must be a
#GPollableInputStream for which g_pollable_input_stream_can_poll()
returns %TRUE, or else the behavior is undefined. If @blocking is
%TRUE, then @stream does not need to be a #GPollableInputStream.
the number of bytes read, or -1 on error.
a #GInputStream
a buffer to read data into
the number of bytes to read
whether to do blocking I/O
optional #GCancellable object, %NULL to ignore.
Tries to write to @stream, as with g_output_stream_write() (if
@blocking is %TRUE) or g_pollable_output_stream_write_nonblocking()
(if @blocking is %FALSE). This can be used to more easily share
code between blocking and non-blocking implementations of a method.
If @blocking is %FALSE, then @stream must be a
#GPollableOutputStream for which
g_pollable_output_stream_can_poll() returns %TRUE or else the
behavior is undefined. If @blocking is %TRUE, then @stream does not
need to be a #GPollableOutputStream.
the number of bytes written, or -1 on error.
a #GOutputStream.
the buffer containing the data to write.
the number of bytes to write
whether to do blocking I/O
optional #GCancellable object, %NULL to ignore.
Tries to write @count bytes to @stream, as with
g_output_stream_write_all(), but using g_pollable_stream_write()
rather than g_output_stream_write().
On a successful write of @count bytes, %TRUE is returned, and
@bytes_written is set to @count.
If there is an error during the operation (including
%G_IO_ERROR_WOULD_BLOCK in the non-blocking case), %FALSE is
returned and @error is set to indicate the error status,
@bytes_written is updated to contain the number of bytes written
into the stream before the error occurred.
As with g_pollable_stream_write(), if @blocking is %FALSE, then
@stream must be a #GPollableOutputStream for which
g_pollable_output_stream_can_poll() returns %TRUE or else the
behavior is undefined. If @blocking is %TRUE, then @stream does not
need to be a #GPollableOutputStream.
%TRUE on success, %FALSE if there was an error
a #GOutputStream.
the buffer containing the data to write.
the number of bytes to write
whether to do blocking I/O
location to store the number of bytes that was written to the stream
optional #GCancellable object, %NULL to ignore.
Lookup "gio-proxy" extension point for a proxy implementation that supports
specified protocol.
return a #GProxy or NULL if protocol is not supported.
the proxy protocol name (e.g. http, socks, etc)
Gets the default #GProxyResolver for the system.
the default #GProxyResolver.
Gets the #GResolver Error Quark.
a #GQuark.
Gets the #GResource Error Quark.
a #GQuark
Loads a binary resource bundle and creates a #GResource representation of it, allowing
you to query it for data.
If you want to use this resource in the global resource namespace you need
to register it with g_resources_register().
a new #GResource, or %NULL on error
the path of a filename to load, in the GLib filename encoding
Returns all the names of children at the specified @path in the set of
globally registered resources.
The return result is a %NULL terminated list of strings which should
be released with g_strfreev().
@lookup_flags controls the behaviour of the lookup.
an array of constant strings
A pathname inside the resource
A #GResourceLookupFlags
Looks for a file at the specified @path in the set of
globally registered resources and if found returns information about it.
@lookup_flags controls the behaviour of the lookup.
%TRUE if the file was found. %FALSE if there were errors
A pathname inside the resource
A #GResourceLookupFlags
a location to place the length of the contents of the file, or %NULL if the length is not needed
a location to place the flags about the file, or %NULL if the length is not needed
Looks for a file at the specified @path in the set of
globally registered resources and returns a #GBytes that
lets you directly access the data in memory.
The data is always followed by a zero byte, so you
can safely use the data as a C string. However, that byte
is not included in the size of the GBytes.
For uncompressed resource files this is a pointer directly into
the resource bundle, which is typically in some readonly data section
in the program binary. For compressed files we allocate memory on
the heap and automatically uncompress the data.
@lookup_flags controls the behaviour of the lookup.
#GBytes or %NULL on error. Free the returned object with g_bytes_unref()
A pathname inside the resource
A #GResourceLookupFlags
Looks for a file at the specified @path in the set of
globally registered resources and returns a #GInputStream
that lets you read the data.
@lookup_flags controls the behaviour of the lookup.
#GInputStream or %NULL on error. Free the returned object with g_object_unref()
A pathname inside the resource
A #GResourceLookupFlags
Gets the default system schema source.
This function is not required for normal uses of #GSettings but it
may be useful to authors of plugin management systems or to those who
want to introspect the content of schemas.
If no schemas are installed, %NULL will be returned.
The returned source may actually consist of multiple schema sources
from different directories, depending on which directories were given
in <envar>XDG_DATA_DIRS</envar> and
<envar>GSETTINGS_SCHEMA_DIR</envar>. For this reason, all lookups
performed against the default source should probably be done
recursively.
the default schema source
Reports an error in an asynchronous function in an idle function by
directly setting the contents of the #GAsyncResult with the given error
information.
a #GObject, or %NULL.
a #GAsyncReadyCallback.
user data passed to @callback.
a #GQuark containing the error domain (usually #G_IO_ERROR).
a specific error code.
a formatted error reporting string.
Reports an error in an idle function. Similar to
g_simple_async_report_error_in_idle(), but takes a #GError rather
than building a new one.
a #GObject, or %NULL
a #GAsyncReadyCallback.
user data passed to @callback.
the #GError to report
Reports an error in an idle function. Similar to
g_simple_async_report_gerror_in_idle(), but takes over the caller's
ownership of @error, so the caller does not have to free it any more.
a #GObject, or %NULL
a #GAsyncReadyCallback.
user data passed to @callback.
the #GError to report
Sorts @targets in place according to the algorithm in RFC 2782.
the head of the sorted list.
a #GList of #GSrvTarget
Gets the default #GTlsBackend for the system.
a #GTlsBackend
Creates a new #GTlsClientConnection wrapping @base_io_stream (which
must have pollable input and output streams) which is assumed to
communicate with the server identified by @server_identity.
the new #GTlsClientConnection, or %NULL on error
the #GIOStream to wrap
the expected identity of the server
Gets the TLS error quark.
a #GQuark.
Creates a new #GTlsFileDatabase which uses anchor certificate authorities
in @anchors to verify certificate chains.
The certificates in @anchors must be PEM encoded.
the new #GTlsFileDatabase, or %NULL on error
filename of anchor certificate authorities.
Creates a new #GTlsServerConnection wrapping @base_io_stream (which
must have pollable input and output streams).
the new #GTlsServerConnection, or %NULL on error
the #GIOStream to wrap
the default server certificate, or %NULL