/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) * All rights reserved. * * This package is an SSL implementation written * by Eric Young (eay@cryptsoft.com). * The implementation was written so as to conform with Netscapes SSL. * * This library is free for commercial and non-commercial use as long as * the following conditions are aheared to. The following conditions * apply to all code found in this distribution, be it the RC4, RSA, * lhash, DES, etc., code; not just the SSL code. The SSL documentation * included with this distribution is covered by the same copyright terms * except that the holder is Tim Hudson (tjh@cryptsoft.com). * * Copyright remains Eric Young's, and as such any Copyright notices in * the code are not to be removed. * If this package is used in a product, Eric Young should be given attribution * as the author of the parts of the library used. * This can be in the form of a textual message at program startup or * in documentation (online or textual) provided with the package. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * "This product includes cryptographic software written by * Eric Young (eay@cryptsoft.com)" * The word 'cryptographic' can be left out if the rouines from the library * being used are not cryptographic related :-). * 4. If you include any Windows specific code (or a derivative thereof) from * the apps directory (application code) you must include an acknowledgement: * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" * * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * The licence and distribution terms for any publically available version or * derivative of this code cannot be changed. i.e. this code cannot simply be * copied and put under another distribution licence * [including the GNU Public Licence.] */ /* ==================================================================== * Copyright (c) 1998-2007 The OpenSSL Project. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * 3. All advertising materials mentioning features or use of this * software must display the following acknowledgment: * "This product includes software developed by the OpenSSL Project * for use in the OpenSSL Toolkit. (http://www.openssl.org/)" * * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to * endorse or promote products derived from this software without * prior written permission. For written permission, please contact * openssl-core@openssl.org. * * 5. Products derived from this software may not be called "OpenSSL" * nor may "OpenSSL" appear in their names without prior written * permission of the OpenSSL Project. * * 6. Redistributions of any form whatsoever must retain the following * acknowledgment: * "This product includes software developed by the OpenSSL Project * for use in the OpenSSL Toolkit (http://www.openssl.org/)" * * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED * OF THE POSSIBILITY OF SUCH DAMAGE. * ==================================================================== * * This product includes cryptographic software written by Eric Young * (eay@cryptsoft.com). This product includes software written by Tim * Hudson (tjh@cryptsoft.com). * */ /* ==================================================================== * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED. * ECC cipher suite support in OpenSSL originally developed by * SUN MICROSYSTEMS, INC., and contributed to the OpenSSL project. */ /* ==================================================================== * Copyright 2005 Nokia. All rights reserved. * * The portions of the attached software ("Contribution") is developed by * Nokia Corporation and is licensed pursuant to the OpenSSL open source * license. * * The Contribution, originally written by Mika Kousa and Pasi Eronen of * Nokia Corporation, consists of the "PSK" (Pre-Shared Key) ciphersuites * support (see RFC 4279) to OpenSSL. * * No patent licenses or other rights except those expressly stated in * the OpenSSL open source license shall be deemed granted or received * expressly, by implication, estoppel, or otherwise. * * No assurances are provided by Nokia that the Contribution does not * infringe the patent or other intellectual property rights of any third * party or that the license provides you with all the necessary rights * to make use of the Contribution. * * THE SOFTWARE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. IN * ADDITION TO THE DISCLAIMERS INCLUDED IN THE LICENSE, NOKIA * SPECIFICALLY DISCLAIMS ANY LIABILITY FOR CLAIMS BROUGHT BY YOU OR ANY * OTHER ENTITY BASED ON INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS OR * OTHERWISE. */ #ifndef OPENSSL_HEADER_SSL_H #define OPENSSL_HEADER_SSL_H #include #include #include #include #include #include #include #include #include #include #if !defined(OPENSSL_WINDOWS) #include #endif /* Forward-declare struct timeval. On Windows, it is defined in winsock2.h and * Windows headers define too many macros to be included in public headers. * However, only a forward declaration is needed. */ struct timeval; #if defined(__cplusplus) extern "C" { #endif /* SSL implementation. */ /* SSL contexts. * * |SSL_CTX| objects manage shared state and configuration between multiple TLS * or DTLS connections. Whether the connections are TLS or DTLS is selected by * an |SSL_METHOD| on creation. * * |SSL_CTX| are reference-counted and may be shared by connections across * multiple threads. Once shared, functions which change the |SSL_CTX|'s * configuration may not be used. */ /* TLS_method is the |SSL_METHOD| used for TLS (and SSLv3) connections. */ OPENSSL_EXPORT const SSL_METHOD *TLS_method(void); /* DTLS_method is the |SSL_METHOD| used for DTLS connections. */ OPENSSL_EXPORT const SSL_METHOD *DTLS_method(void); /* SSL_CTX_new returns a newly-allocated |SSL_CTX| with default settings or NULL * on error. */ OPENSSL_EXPORT SSL_CTX *SSL_CTX_new(const SSL_METHOD *method); /* SSL_CTX_up_ref increments the reference count of |ctx|. It returns one. */ OPENSSL_EXPORT int SSL_CTX_up_ref(SSL_CTX *ctx); /* SSL_CTX_free releases memory associated with |ctx|. */ OPENSSL_EXPORT void SSL_CTX_free(SSL_CTX *ctx); /* SSL connections. * * An |SSL| object represents a single TLS or DTLS connection. Although the * shared |SSL_CTX| is thread-safe, an |SSL| is not thread-safe and may only be * used on one thread at a time. */ /* SSL_new returns a newly-allocated |SSL| using |ctx| or NULL on error. The new * connection inherits settings from |ctx| at the time of creation. Settings may * also be individually configured on the connection. * * On creation, an |SSL| is not configured to be either a client or server. Call * |SSL_set_connect_state| or |SSL_set_accept_state| to set this. */ OPENSSL_EXPORT SSL *SSL_new(SSL_CTX *ctx); /* SSL_free releases memory associated with |ssl|. */ OPENSSL_EXPORT void SSL_free(SSL *ssl); /* SSL_get_SSL_CTX returns the |SSL_CTX| associated with |ssl|. If * |SSL_set_SSL_CTX| is called, it returns the new |SSL_CTX|, not the initial * one. */ OPENSSL_EXPORT SSL_CTX *SSL_get_SSL_CTX(const SSL *ssl); /* SSL_set_connect_state configures |ssl| to be a client. */ OPENSSL_EXPORT void SSL_set_connect_state(SSL *ssl); /* SSL_set_accept_state configures |ssl| to be a server. */ OPENSSL_EXPORT void SSL_set_accept_state(SSL *ssl); /* SSL_is_server returns one if |ssl| is configured as a server and zero * otherwise. */ OPENSSL_EXPORT int SSL_is_server(const SSL *ssl); /* SSL_is_dtls returns one if |ssl| is a DTLS connection and zero otherwise. */ OPENSSL_EXPORT int SSL_is_dtls(const SSL *ssl); /* SSL_set_bio configures |ssl| to read from |rbio| and write to |wbio|. |ssl| * takes ownership of the two |BIO|s. If |rbio| and |wbio| are the same, |ssl| * only takes ownership of one reference. * * In DTLS, if |rbio| is blocking, it must handle * |BIO_CTRL_DGRAM_SET_NEXT_TIMEOUT| control requests to set read timeouts. * * If |rbio| is the same as the currently configured |BIO| for reading, that * side is left untouched and is not freed. * * If |wbio| is the same as the currently configured |BIO| for writing AND |ssl| * is not currently configured to read from and write to the same |BIO|, that * side is left untouched and is not freed. This asymmetry is present for * historical reasons. * * Due to the very complex historical behavior of this function, calling this * function if |ssl| already has |BIO|s configured is deprecated. Prefer * |SSL_set0_rbio| and |SSL_set0_wbio| instead. */ OPENSSL_EXPORT void SSL_set_bio(SSL *ssl, BIO *rbio, BIO *wbio); /* SSL_set0_rbio configures |ssl| to write to |rbio|. It takes ownership of * |rbio|. * * Note that, although this function and |SSL_set0_wbio| may be called on the * same |BIO|, each call takes a reference. Use |BIO_up_ref| to balance this. */ OPENSSL_EXPORT void SSL_set0_rbio(SSL *ssl, BIO *rbio); /* SSL_set0_wbio configures |ssl| to write to |wbio|. It takes ownership of * |wbio|. * * Note that, although this function and |SSL_set0_rbio| may be called on the * same |BIO|, each call takes a reference. Use |BIO_up_ref| to balance this. */ OPENSSL_EXPORT void SSL_set0_wbio(SSL *ssl, BIO *wbio); /* SSL_get_rbio returns the |BIO| that |ssl| reads from. */ OPENSSL_EXPORT BIO *SSL_get_rbio(const SSL *ssl); /* SSL_get_wbio returns the |BIO| that |ssl| writes to. */ OPENSSL_EXPORT BIO *SSL_get_wbio(const SSL *ssl); /* SSL_get_fd calls |SSL_get_rfd|. */ OPENSSL_EXPORT int SSL_get_fd(const SSL *ssl); /* SSL_get_rfd returns the file descriptor that |ssl| is configured to read * from. If |ssl|'s read |BIO| is not configured or doesn't wrap a file * descriptor then it returns -1. * * Note: On Windows, this may return either a file descriptor or a socket (cast * to int), depending on whether |ssl| was configured with a file descriptor or * socket |BIO|. */ OPENSSL_EXPORT int SSL_get_rfd(const SSL *ssl); /* SSL_get_wfd returns the file descriptor that |ssl| is configured to write * to. If |ssl|'s write |BIO| is not configured or doesn't wrap a file * descriptor then it returns -1. * * Note: On Windows, this may return either a file descriptor or a socket (cast * to int), depending on whether |ssl| was configured with a file descriptor or * socket |BIO|. */ OPENSSL_EXPORT int SSL_get_wfd(const SSL *ssl); /* SSL_set_fd configures |ssl| to read from and write to |fd|. It returns one * on success and zero on allocation error. The caller retains ownership of * |fd|. * * On Windows, |fd| is cast to a |SOCKET| and used with Winsock APIs. */ OPENSSL_EXPORT int SSL_set_fd(SSL *ssl, int fd); /* SSL_set_rfd configures |ssl| to read from |fd|. It returns one on success and * zero on allocation error. The caller retains ownership of |fd|. * * On Windows, |fd| is cast to a |SOCKET| and used with Winsock APIs. */ OPENSSL_EXPORT int SSL_set_rfd(SSL *ssl, int fd); /* SSL_set_wfd configures |ssl| to write to |fd|. It returns one on success and * zero on allocation error. The caller retains ownership of |fd|. * * On Windows, |fd| is cast to a |SOCKET| and used with Winsock APIs. */ OPENSSL_EXPORT int SSL_set_wfd(SSL *ssl, int fd); /* SSL_do_handshake continues the current handshake. If there is none or the * handshake has completed or False Started, it returns one. Otherwise, it * returns <= 0. The caller should pass the value into |SSL_get_error| to * determine how to proceed. * * In DTLS, if the read |BIO| is non-blocking, the caller must drive * retransmissions. Whenever |SSL_get_error| signals |SSL_ERROR_WANT_READ|, use * |DTLSv1_get_timeout| to determine the current timeout. If it expires before * the next retry, call |DTLSv1_handle_timeout|. Note that DTLS handshake * retransmissions use fresh sequence numbers, so it is not sufficient to replay * packets at the transport. * * TODO(davidben): Ensure 0 is only returned on transport EOF. * https://crbug.com/466303. */ OPENSSL_EXPORT int SSL_do_handshake(SSL *ssl); /* SSL_connect configures |ssl| as a client, if unconfigured, and calls * |SSL_do_handshake|. */ OPENSSL_EXPORT int SSL_connect(SSL *ssl); /* SSL_accept configures |ssl| as a server, if unconfigured, and calls * |SSL_do_handshake|. */ OPENSSL_EXPORT int SSL_accept(SSL *ssl); /* SSL_read reads up to |num| bytes from |ssl| into |buf|. It implicitly runs * any pending handshakes, including renegotiations when enabled. On success, it * returns the number of bytes read. Otherwise, it returns <= 0. The caller * should pass the value into |SSL_get_error| to determine how to proceed. * * TODO(davidben): Ensure 0 is only returned on transport EOF. * https://crbug.com/466303. */ OPENSSL_EXPORT int SSL_read(SSL *ssl, void *buf, int num); /* SSL_peek behaves like |SSL_read| but does not consume any bytes returned. */ OPENSSL_EXPORT int SSL_peek(SSL *ssl, void *buf, int num); /* SSL_pending returns the number of bytes available in |ssl|. It does not read * from the transport. */ OPENSSL_EXPORT int SSL_pending(const SSL *ssl); /* SSL_write writes up to |num| bytes from |buf| into |ssl|. It implicitly runs * any pending handshakes, including renegotiations when enabled. On success, it * returns the number of bytes written. Otherwise, it returns <= 0. The caller * should pass the value into |SSL_get_error| to determine how to proceed. * * In TLS, a non-blocking |SSL_write| differs from non-blocking |write| in that * a failed |SSL_write| still commits to the data passed in. When retrying, the * caller must supply the original write buffer (or a larger one containing the * original as a prefix). By default, retries will fail if they also do not * reuse the same |buf| pointer. This may be relaxed with * |SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER|, but the buffer contents still must be * unchanged. * * By default, in TLS, |SSL_write| will not return success until all |num| bytes * are written. This may be relaxed with |SSL_MODE_ENABLE_PARTIAL_WRITE|. It * allows |SSL_write| to complete with a partial result when only part of the * input was written in a single record. * * In DTLS, neither |SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER| and * |SSL_MODE_ENABLE_PARTIAL_WRITE| do anything. The caller may retry with a * different buffer freely. A single call to |SSL_write| only ever writes a * single record in a single packet, so |num| must be at most * |SSL3_RT_MAX_PLAIN_LENGTH|. * * TODO(davidben): Ensure 0 is only returned on transport EOF. * https://crbug.com/466303. */ OPENSSL_EXPORT int SSL_write(SSL *ssl, const void *buf, int num); /* SSL_shutdown shuts down |ssl|. On success, it completes in two stages. First, * it returns 0 if |ssl| completed uni-directional shutdown; close_notify has * been sent, but the peer's close_notify has not been received. Most callers * may stop at this point. For bi-directional shutdown, call |SSL_shutdown| * again. It returns 1 if close_notify has been both sent and received. * * If the peer's close_notify arrived first, the first stage is skipped. * |SSL_shutdown| will return 1 once close_notify is sent and skip 0. Callers * only interested in uni-directional shutdown must therefore allow for the * first stage returning either 0 or 1. * * |SSL_shutdown| returns -1 on failure. The caller should pass the return value * into |SSL_get_error| to determine how to proceed. If the underlying |BIO| is * non-blocking, both stages may require retry. */ OPENSSL_EXPORT int SSL_shutdown(SSL *ssl); /* SSL_CTX_set_quiet_shutdown sets quiet shutdown on |ctx| to |mode|. If * enabled, |SSL_shutdown| will not send a close_notify alert or wait for one * from the peer. It will instead synchronously return one. */ OPENSSL_EXPORT void SSL_CTX_set_quiet_shutdown(SSL_CTX *ctx, int mode); /* SSL_CTX_get_quiet_shutdown returns whether quiet shutdown is enabled for * |ctx|. */ OPENSSL_EXPORT int SSL_CTX_get_quiet_shutdown(const SSL_CTX *ctx); /* SSL_set_quiet_shutdown sets quiet shutdown on |ssl| to |mode|. If enabled, * |SSL_shutdown| will not send a close_notify alert or wait for one from the * peer. It will instead synchronously return one. */ OPENSSL_EXPORT void SSL_set_quiet_shutdown(SSL *ssl, int mode); /* SSL_get_quiet_shutdown returns whether quiet shutdown is enabled for * |ssl|. */ OPENSSL_EXPORT int SSL_get_quiet_shutdown(const SSL *ssl); /* SSL_get_error returns a |SSL_ERROR_*| value for the most recent operation on * |ssl|. It should be called after an operation failed to determine whether the * error was fatal and, if not, when to retry. */ OPENSSL_EXPORT int SSL_get_error(const SSL *ssl, int ret_code); /* SSL_ERROR_NONE indicates the operation succeeded. */ #define SSL_ERROR_NONE 0 /* SSL_ERROR_SSL indicates the operation failed within the library. The caller * may inspect the error queue for more information. */ #define SSL_ERROR_SSL 1 /* SSL_ERROR_WANT_READ indicates the operation failed attempting to read from * the transport. The caller may retry the operation when the transport is ready * for reading. * * If signaled by a DTLS handshake, the caller must also call * |DTLSv1_get_timeout| and |DTLSv1_handle_timeout| as appropriate. See * |SSL_do_handshake|. */ #define SSL_ERROR_WANT_READ 2 /* SSL_ERROR_WANT_WRITE indicates the operation failed attempting to write to * the transport. The caller may retry the operation when the transport is ready * for writing. */ #define SSL_ERROR_WANT_WRITE 3 /* SSL_ERROR_WANT_X509_LOOKUP indicates the operation failed in calling the * |cert_cb| or |client_cert_cb|. The caller may retry the operation when the * callback is ready to return a certificate or one has been configured * externally. * * See also |SSL_CTX_set_cert_cb| and |SSL_CTX_set_client_cert_cb|. */ #define SSL_ERROR_WANT_X509_LOOKUP 4 /* SSL_ERROR_SYSCALL indicates the operation failed externally to the library. * The caller should consult the system-specific error mechanism. This is * typically |errno| but may be something custom if using a custom |BIO|. It * may also be signaled if the transport returned EOF, in which case the * operation's return value will be zero. */ #define SSL_ERROR_SYSCALL 5 /* SSL_ERROR_ZERO_RETURN indicates the operation failed because the connection * was cleanly shut down with a close_notify alert. */ #define SSL_ERROR_ZERO_RETURN 6 /* SSL_ERROR_WANT_CONNECT indicates the operation failed attempting to connect * the transport (the |BIO| signaled |BIO_RR_CONNECT|). The caller may retry the * operation when the transport is ready. */ #define SSL_ERROR_WANT_CONNECT 7 /* SSL_ERROR_WANT_ACCEPT indicates the operation failed attempting to accept a * connection from the transport (the |BIO| signaled |BIO_RR_ACCEPT|). The * caller may retry the operation when the transport is ready. * * TODO(davidben): Remove this. It's used by accept BIOs which are bizarre. */ #define SSL_ERROR_WANT_ACCEPT 8 /* SSL_ERROR_WANT_CHANNEL_ID_LOOKUP indicates the operation failed looking up * the Channel ID key. The caller may retry the operation when |channel_id_cb| * is ready to return a key or one has been configured with * |SSL_set1_tls_channel_id|. * * See also |SSL_CTX_set_channel_id_cb|. */ #define SSL_ERROR_WANT_CHANNEL_ID_LOOKUP 9 /* SSL_ERROR_PENDING_SESSION indicates the operation failed because the session * lookup callback indicated the session was unavailable. The caller may retry * the operation when lookup has completed. * * See also |SSL_CTX_sess_set_get_cb| and |SSL_magic_pending_session_ptr|. */ #define SSL_ERROR_PENDING_SESSION 11 /* SSL_ERROR_PENDING_CERTIFICATE indicates the operation failed because the * early callback indicated certificate lookup was incomplete. The caller may * retry the operation when lookup has completed. Note: when the operation is * retried, the early callback will not be called a second time. * * See also |SSL_CTX_set_select_certificate_cb|. */ #define SSL_ERROR_PENDING_CERTIFICATE 12 /* SSL_ERROR_WANT_PRIVATE_KEY_OPERATION indicates the operation failed because * a private key operation was unfinished. The caller may retry the operation * when the private key operation is complete. * * See also |SSL_set_private_key_method| and * |SSL_CTX_set_private_key_method|. */ #define SSL_ERROR_WANT_PRIVATE_KEY_OPERATION 13 /* SSL_set_mtu sets the |ssl|'s MTU in DTLS to |mtu|. It returns one on success * and zero on failure. */ OPENSSL_EXPORT int SSL_set_mtu(SSL *ssl, unsigned mtu); /* DTLSv1_set_initial_timeout_duration sets the initial duration for a DTLS * handshake timeout. * * This duration overrides the default of 1 second, which is the strong * recommendation of RFC 6347 (see section 4.2.4.1). However, there may exist * situations where a shorter timeout would be beneficial, such as for * time-sensitive applications. */ OPENSSL_EXPORT void DTLSv1_set_initial_timeout_duration(SSL *ssl, unsigned duration_ms); /* DTLSv1_get_timeout queries the next DTLS handshake timeout. If there is a * timeout in progress, it sets |*out| to the time remaining and returns one. * Otherwise, it returns zero. * * When the timeout expires, call |DTLSv1_handle_timeout| to handle the * retransmit behavior. * * NOTE: This function must be queried again whenever the handshake state * machine changes, including when |DTLSv1_handle_timeout| is called. */ OPENSSL_EXPORT int DTLSv1_get_timeout(const SSL *ssl, struct timeval *out); /* DTLSv1_handle_timeout is called when a DTLS handshake timeout expires. If no * timeout had expired, it returns 0. Otherwise, it retransmits the previous * flight of handshake messages and returns 1. If too many timeouts had expired * without progress or an error occurs, it returns -1. * * The caller's external timer should be compatible with the one |ssl| queries * within some fudge factor. Otherwise, the call will be a no-op, but * |DTLSv1_get_timeout| will return an updated timeout. * * If the function returns -1, checking if |SSL_get_error| returns * |SSL_ERROR_WANT_WRITE| may be used to determine if the retransmit failed due * to a non-fatal error at the write |BIO|. However, the operation may not be * retried until the next timeout fires. * * WARNING: This function breaks the usual return value convention. * * TODO(davidben): This |SSL_ERROR_WANT_WRITE| behavior is kind of bizarre. */ OPENSSL_EXPORT int DTLSv1_handle_timeout(SSL *ssl); /* Protocol versions. */ #define DTLS1_VERSION_MAJOR 0xfe #define SSL3_VERSION_MAJOR 0x03 #define SSL3_VERSION 0x0300 #define TLS1_VERSION 0x0301 #define TLS1_1_VERSION 0x0302 #define TLS1_2_VERSION 0x0303 #define TLS1_3_VERSION 0x0304 #define DTLS1_VERSION 0xfeff #define DTLS1_2_VERSION 0xfefd #define TLS1_3_DRAFT_VERSION 0x7f12 /* SSL_CTX_set_min_proto_version sets the minimum protocol version for |ctx| to * |version|. If |version| is zero, the default minimum version is used. It * returns one on success and zero if |version| is invalid. */ OPENSSL_EXPORT int SSL_CTX_set_min_proto_version(SSL_CTX *ctx, uint16_t version); /* SSL_CTX_set_max_proto_version sets the maximum protocol version for |ctx| to * |version|. If |version| is zero, the default maximum version is used. It * returns one on success and zero if |version| is invalid. */ OPENSSL_EXPORT int SSL_CTX_set_max_proto_version(SSL_CTX *ctx, uint16_t version); /* SSL_set_min_proto_version sets the minimum protocol version for |ssl| to * |version|. If |version| is zero, the default minimum version is used. It * returns one on success and zero if |version| is invalid. */ OPENSSL_EXPORT int SSL_set_min_proto_version(SSL *ssl, uint16_t version); /* SSL_set_max_proto_version sets the maximum protocol version for |ssl| to * |version|. If |version| is zero, the default maximum version is used. It * returns one on success and zero if |version| is invalid. */ OPENSSL_EXPORT int SSL_set_max_proto_version(SSL *ssl, uint16_t version); /* SSL_version returns the TLS or DTLS protocol version used by |ssl|, which is * one of the |*_VERSION| values. (E.g. |TLS1_2_VERSION|.) Before the version * is negotiated, the result is undefined. */ OPENSSL_EXPORT int SSL_version(const SSL *ssl); /* Options. * * Options configure protocol behavior. */ /* SSL_OP_NO_QUERY_MTU, in DTLS, disables querying the MTU from the underlying * |BIO|. Instead, the MTU is configured with |SSL_set_mtu|. */ #define SSL_OP_NO_QUERY_MTU 0x00001000L /* SSL_OP_NO_TICKET disables session ticket support (RFC 5077). */ #define SSL_OP_NO_TICKET 0x00004000L /* SSL_OP_CIPHER_SERVER_PREFERENCE configures servers to select ciphers and * ECDHE curves according to the server's preferences instead of the * client's. */ #define SSL_OP_CIPHER_SERVER_PREFERENCE 0x00400000L /* The following flags toggle individual protocol versions. This is deprecated. * Use |SSL_CTX_set_min_proto_version| and |SSL_CTX_set_max_proto_version| * instead. */ #define SSL_OP_NO_SSLv3 0x02000000L #define SSL_OP_NO_TLSv1 0x04000000L #define SSL_OP_NO_TLSv1_2 0x08000000L #define SSL_OP_NO_TLSv1_1 0x10000000L #define SSL_OP_NO_TLSv1_3 0x20000000L #define SSL_OP_NO_DTLSv1 SSL_OP_NO_TLSv1 #define SSL_OP_NO_DTLSv1_2 SSL_OP_NO_TLSv1_2 /* SSL_CTX_set_options enables all options set in |options| (which should be one * or more of the |SSL_OP_*| values, ORed together) in |ctx|. It returns a * bitmask representing the resulting enabled options. */ OPENSSL_EXPORT uint32_t SSL_CTX_set_options(SSL_CTX *ctx, uint32_t options); /* SSL_CTX_clear_options disables all options set in |options| (which should be * one or more of the |SSL_OP_*| values, ORed together) in |ctx|. It returns a * bitmask representing the resulting enabled options. */ OPENSSL_EXPORT uint32_t SSL_CTX_clear_options(SSL_CTX *ctx, uint32_t options); /* SSL_CTX_get_options returns a bitmask of |SSL_OP_*| values that represent all * the options enabled for |ctx|. */ OPENSSL_EXPORT uint32_t SSL_CTX_get_options(const SSL_CTX *ctx); /* SSL_set_options enables all options set in |options| (which should be one or * more of the |SSL_OP_*| values, ORed together) in |ssl|. It returns a bitmask * representing the resulting enabled options. */ OPENSSL_EXPORT uint32_t SSL_set_options(SSL *ssl, uint32_t options); /* SSL_clear_options disables all options set in |options| (which should be one * or more of the |SSL_OP_*| values, ORed together) in |ssl|. It returns a * bitmask representing the resulting enabled options. */ OPENSSL_EXPORT uint32_t SSL_clear_options(SSL *ssl, uint32_t options); /* SSL_get_options returns a bitmask of |SSL_OP_*| values that represent all the * options enabled for |ssl|. */ OPENSSL_EXPORT uint32_t SSL_get_options(const SSL *ssl); /* Modes. * * Modes configure API behavior. */ /* SSL_MODE_ENABLE_PARTIAL_WRITE, in TLS, allows |SSL_write| to complete with a * partial result when the only part of the input was written in a single * record. In DTLS, it does nothing. */ #define SSL_MODE_ENABLE_PARTIAL_WRITE 0x00000001L /* SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER, in TLS, allows retrying an incomplete * |SSL_write| with a different buffer. However, |SSL_write| still assumes the * buffer contents are unchanged. This is not the default to avoid the * misconception that non-blocking |SSL_write| behaves like non-blocking * |write|. In DTLS, it does nothing. */ #define SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER 0x00000002L /* SSL_MODE_NO_AUTO_CHAIN disables automatically building a certificate chain * before sending certificates to the peer. This flag is set (and the feature * disabled) by default. * TODO(davidben): Remove this behavior. https://crbug.com/boringssl/42. */ #define SSL_MODE_NO_AUTO_CHAIN 0x00000008L /* SSL_MODE_ENABLE_FALSE_START allows clients to send application data before * receipt of ChangeCipherSpec and Finished. This mode enables full handshakes * to 'complete' in one RTT. See RFC 7918. * * When False Start is enabled, |SSL_do_handshake| may succeed before the * handshake has completely finished. |SSL_write| will function at this point, * and |SSL_read| will transparently wait for the final handshake leg before * returning application data. To determine if False Start occurred or when the * handshake is completely finished, see |SSL_in_false_start|, |SSL_in_init|, * and |SSL_CB_HANDSHAKE_DONE| from |SSL_CTX_set_info_callback|. */ #define SSL_MODE_ENABLE_FALSE_START 0x00000080L /* SSL_MODE_CBC_RECORD_SPLITTING causes multi-byte CBC records in SSL 3.0 and * TLS 1.0 to be split in two: the first record will contain a single byte and * the second will contain the remainder. This effectively randomises the IV and * prevents BEAST attacks. */ #define SSL_MODE_CBC_RECORD_SPLITTING 0x00000100L /* SSL_MODE_NO_SESSION_CREATION will cause any attempts to create a session to * fail with SSL_R_SESSION_MAY_NOT_BE_CREATED. This can be used to enforce that * session resumption is used for a given SSL*. */ #define SSL_MODE_NO_SESSION_CREATION 0x00000200L /* SSL_MODE_SEND_FALLBACK_SCSV sends TLS_FALLBACK_SCSV in the ClientHello. * To be set only by applications that reconnect with a downgraded protocol * version; see RFC 7507 for details. * * DO NOT ENABLE THIS if your application attempts a normal handshake. Only use * this in explicit fallback retries, following the guidance in RFC 7507. */ #define SSL_MODE_SEND_FALLBACK_SCSV 0x00000400L /* SSL_CTX_set_mode enables all modes set in |mode| (which should be one or more * of the |SSL_MODE_*| values, ORed together) in |ctx|. It returns a bitmask * representing the resulting enabled modes. */ OPENSSL_EXPORT uint32_t SSL_CTX_set_mode(SSL_CTX *ctx, uint32_t mode); /* SSL_CTX_clear_mode disables all modes set in |mode| (which should be one or * more of the |SSL_MODE_*| values, ORed together) in |ctx|. It returns a * bitmask representing the resulting enabled modes. */ OPENSSL_EXPORT uint32_t SSL_CTX_clear_mode(SSL_CTX *ctx, uint32_t mode); /* SSL_CTX_get_mode returns a bitmask of |SSL_MODE_*| values that represent all * the modes enabled for |ssl|. */ OPENSSL_EXPORT uint32_t SSL_CTX_get_mode(const SSL_CTX *ctx); /* SSL_set_mode enables all modes set in |mode| (which should be one or more of * the |SSL_MODE_*| values, ORed together) in |ssl|. It returns a bitmask * representing the resulting enabled modes. */ OPENSSL_EXPORT uint32_t SSL_set_mode(SSL *ssl, uint32_t mode); /* SSL_clear_mode disables all modes set in |mode| (which should be one or more * of the |SSL_MODE_*| values, ORed together) in |ssl|. It returns a bitmask * representing the resulting enabled modes. */ OPENSSL_EXPORT uint32_t SSL_clear_mode(SSL *ssl, uint32_t mode); /* SSL_get_mode returns a bitmask of |SSL_MODE_*| values that represent all the * modes enabled for |ssl|. */ OPENSSL_EXPORT uint32_t SSL_get_mode(const SSL *ssl); /* SSL_CTX_set0_buffer_pool sets a |CRYPTO_BUFFER_POOL| that will be used to * store certificates. This can allow multiple connections to share * certificates and thus save memory. * * The SSL_CTX does not take ownership of |pool| and the caller must ensure * that |pool| outlives |ctx| and all objects linked to it, including |SSL|, * |X509| and |SSL_SESSION| objects. Basically, don't ever free |pool|. */ OPENSSL_EXPORT void SSL_CTX_set0_buffer_pool(SSL_CTX *ctx, CRYPTO_BUFFER_POOL *pool); /* Configuring certificates and private keys. * * These functions configure the connection's leaf certificate, private key, and * certificate chain. The certificate chain is ordered leaf to root (as sent on * the wire) but does not include the leaf. Both client and server certificates * use these functions. * * Certificates and keys may be configured before the handshake or dynamically * in the early callback and certificate callback. */ /* SSL_CTX_use_certificate sets |ctx|'s leaf certificate to |x509|. It returns * one on success and zero on failure. */ OPENSSL_EXPORT int SSL_CTX_use_certificate(SSL_CTX *ctx, X509 *x509); /* SSL_use_certificate sets |ssl|'s leaf certificate to |x509|. It returns one * on success and zero on failure. */ OPENSSL_EXPORT int SSL_use_certificate(SSL *ssl, X509 *x509); /* SSL_CTX_use_PrivateKey sets |ctx|'s private key to |pkey|. It returns one on * success and zero on failure. */ OPENSSL_EXPORT int SSL_CTX_use_PrivateKey(SSL_CTX *ctx, EVP_PKEY *pkey); /* SSL_use_PrivateKey sets |ssl|'s private key to |pkey|. It returns one on * success and zero on failure. */ OPENSSL_EXPORT int SSL_use_PrivateKey(SSL *ssl, EVP_PKEY *pkey); /* SSL_CTX_set0_chain sets |ctx|'s certificate chain, excluding the leaf, to * |chain|. On success, it returns one and takes ownership of |chain|. * Otherwise, it returns zero. */ OPENSSL_EXPORT int SSL_CTX_set0_chain(SSL_CTX *ctx, STACK_OF(X509) *chain); /* SSL_CTX_set1_chain sets |ctx|'s certificate chain, excluding the leaf, to * |chain|. It returns one on success and zero on failure. The caller retains * ownership of |chain| and may release it freely. */ OPENSSL_EXPORT int SSL_CTX_set1_chain(SSL_CTX *ctx, STACK_OF(X509) *chain); /* SSL_set0_chain sets |ssl|'s certificate chain, excluding the leaf, to * |chain|. On success, it returns one and takes ownership of |chain|. * Otherwise, it returns zero. */ OPENSSL_EXPORT int SSL_set0_chain(SSL *ssl, STACK_OF(X509) *chain); /* SSL_set1_chain sets |ssl|'s certificate chain, excluding the leaf, to * |chain|. It returns one on success and zero on failure. The caller retains * ownership of |chain| and may release it freely. */ OPENSSL_EXPORT int SSL_set1_chain(SSL *ssl, STACK_OF(X509) *chain); /* SSL_CTX_add0_chain_cert appends |x509| to |ctx|'s certificate chain. On * success, it returns one and takes ownership of |x509|. Otherwise, it returns * zero. */ OPENSSL_EXPORT int SSL_CTX_add0_chain_cert(SSL_CTX *ctx, X509 *x509); /* SSL_CTX_add1_chain_cert appends |x509| to |ctx|'s certificate chain. It * returns one on success and zero on failure. The caller retains ownership of * |x509| and may release it freely. */ OPENSSL_EXPORT int SSL_CTX_add1_chain_cert(SSL_CTX *ctx, X509 *x509); /* SSL_add0_chain_cert appends |x509| to |ctx|'s certificate chain. On success, * it returns one and takes ownership of |x509|. Otherwise, it returns zero. */ OPENSSL_EXPORT int SSL_add0_chain_cert(SSL *ssl, X509 *x509); /* SSL_CTX_add_extra_chain_cert calls |SSL_CTX_add0_chain_cert|. */ OPENSSL_EXPORT int SSL_CTX_add_extra_chain_cert(SSL_CTX *ctx, X509 *x509); /* SSL_add1_chain_cert appends |x509| to |ctx|'s certificate chain. It returns * one on success and zero on failure. The caller retains ownership of |x509| * and may release it freely. */ OPENSSL_EXPORT int SSL_add1_chain_cert(SSL *ssl, X509 *x509); /* SSL_CTX_clear_chain_certs clears |ctx|'s certificate chain and returns * one. */ OPENSSL_EXPORT int SSL_CTX_clear_chain_certs(SSL_CTX *ctx); /* SSL_CTX_clear_extra_chain_certs calls |SSL_CTX_clear_chain_certs|. */ OPENSSL_EXPORT int SSL_CTX_clear_extra_chain_certs(SSL_CTX *ctx); /* SSL_clear_chain_certs clears |ssl|'s certificate chain and returns one. */ OPENSSL_EXPORT int SSL_clear_chain_certs(SSL *ssl); /* SSL_CTX_set_cert_cb sets a callback that is called to select a certificate. * The callback returns one on success, zero on internal error, and a negative * number on failure or to pause the handshake. If the handshake is paused, * |SSL_get_error| will return |SSL_ERROR_WANT_X509_LOOKUP|. * * On the client, the callback may call |SSL_get0_certificate_types| and * |SSL_get_client_CA_list| for information on the server's certificate * request. * * On the server, the callback will be called on non-resumption handshakes, * after extensions have been processed. */ OPENSSL_EXPORT void SSL_CTX_set_cert_cb(SSL_CTX *ctx, int (*cb)(SSL *ssl, void *arg), void *arg); /* SSL_set_cert_cb sets a callback that is called to select a certificate. The * callback returns one on success, zero on internal error, and a negative * number on failure or to pause the handshake. If the handshake is paused, * |SSL_get_error| will return |SSL_ERROR_WANT_X509_LOOKUP|. * * On the client, the callback may call |SSL_get0_certificate_types| and * |SSL_get_client_CA_list| for information on the server's certificate * request. */ OPENSSL_EXPORT void SSL_set_cert_cb(SSL *ssl, int (*cb)(SSL *ssl, void *arg), void *arg); /* SSL_get0_certificate_types, for a client, sets |*out_types| to an array * containing the client certificate types requested by a server. It returns the * length of the array. * * The behavior of this function is undefined except during the callbacks set by * by |SSL_CTX_set_cert_cb| and |SSL_CTX_set_client_cert_cb| or when the * handshake is paused because of them. */ OPENSSL_EXPORT size_t SSL_get0_certificate_types(SSL *ssl, const uint8_t **out_types); /* SSL_certs_clear resets the private key, leaf certificate, and certificate * chain of |ssl|. */ OPENSSL_EXPORT void SSL_certs_clear(SSL *ssl); /* SSL_CTX_check_private_key returns one if the certificate and private key * configured in |ctx| are consistent and zero otherwise. */ OPENSSL_EXPORT int SSL_CTX_check_private_key(const SSL_CTX *ctx); /* SSL_check_private_key returns one if the certificate and private key * configured in |ssl| are consistent and zero otherwise. */ OPENSSL_EXPORT int SSL_check_private_key(const SSL *ssl); /* SSL_CTX_get0_certificate returns |ctx|'s leaf certificate. */ OPENSSL_EXPORT X509 *SSL_CTX_get0_certificate(const SSL_CTX *ctx); /* SSL_get_certificate returns |ssl|'s leaf certificate. */ OPENSSL_EXPORT X509 *SSL_get_certificate(const SSL *ssl); /* SSL_CTX_get0_privatekey returns |ctx|'s private key. */ OPENSSL_EXPORT EVP_PKEY *SSL_CTX_get0_privatekey(const SSL_CTX *ctx); /* SSL_get_privatekey returns |ssl|'s private key. */ OPENSSL_EXPORT EVP_PKEY *SSL_get_privatekey(const SSL *ssl); /* SSL_CTX_get0_chain_certs sets |*out_chain| to |ctx|'s certificate chain and * returns one. */ OPENSSL_EXPORT int SSL_CTX_get0_chain_certs(const SSL_CTX *ctx, STACK_OF(X509) **out_chain); /* SSL_CTX_get_extra_chain_certs calls |SSL_CTX_get0_chain_certs|. */ OPENSSL_EXPORT int SSL_CTX_get_extra_chain_certs(const SSL_CTX *ctx, STACK_OF(X509) **out_chain); /* SSL_get0_chain_certs sets |*out_chain| to |ssl|'s certificate chain and * returns one. */ OPENSSL_EXPORT int SSL_get0_chain_certs(const SSL *ssl, STACK_OF(X509) **out_chain); /* SSL_CTX_set_signed_cert_timestamp_list sets the list of signed certificate * timestamps that is sent to clients that request it. The |list| argument must * contain one or more SCT structures serialised as a SignedCertificateTimestamp * List (see https://tools.ietf.org/html/rfc6962#section-3.3) – i.e. each SCT * is prefixed by a big-endian, uint16 length and the concatenation of one or * more such prefixed SCTs are themselves also prefixed by a uint16 length. It * returns one on success and zero on error. The caller retains ownership of * |list|. */ OPENSSL_EXPORT int SSL_CTX_set_signed_cert_timestamp_list(SSL_CTX *ctx, const uint8_t *list, size_t list_len); /* SSL_set_signed_cert_timestamp_list sets the list of signed certificate * timestamps that is sent to clients that request is. The same format as the * one used for |SSL_CTX_set_signed_cert_timestamp_list| applies. The caller * retains ownership of |list|. */ OPENSSL_EXPORT int SSL_set_signed_cert_timestamp_list(SSL *ctx, const uint8_t *list, size_t list_len); /* SSL_CTX_set_ocsp_response sets the OCSP response that is sent to clients * which request it. It returns one on success and zero on error. The caller * retains ownership of |response|. */ OPENSSL_EXPORT int SSL_CTX_set_ocsp_response(SSL_CTX *ctx, const uint8_t *response, size_t response_len); /* SSL_set_ocsp_response sets the OCSP response that is sent to clients which * request it. It returns one on success and zero on error. The caller retains * ownership of |response|. */ OPENSSL_EXPORT int SSL_set_ocsp_response(SSL *ssl, const uint8_t *response, size_t response_len); /* SSL_SIGN_* are signature algorithm values as defined in TLS 1.3. */ #define SSL_SIGN_RSA_PKCS1_SHA1 0x0201 #define SSL_SIGN_RSA_PKCS1_SHA256 0x0401 #define SSL_SIGN_RSA_PKCS1_SHA384 0x0501 #define SSL_SIGN_RSA_PKCS1_SHA512 0x0601 #define SSL_SIGN_ECDSA_SHA1 0x0203 #define SSL_SIGN_ECDSA_SECP256R1_SHA256 0x0403 #define SSL_SIGN_ECDSA_SECP384R1_SHA384 0x0503 #define SSL_SIGN_ECDSA_SECP521R1_SHA512 0x0603 #define SSL_SIGN_RSA_PSS_SHA256 0x0804 #define SSL_SIGN_RSA_PSS_SHA384 0x0805 #define SSL_SIGN_RSA_PSS_SHA512 0x0806 /* SSL_SIGN_RSA_PKCS1_MD5_SHA1 is an internal signature algorithm used to * specify raw RSASSA-PKCS1-v1_5 with an MD5/SHA-1 concatenation, as used in TLS * before TLS 1.2. */ #define SSL_SIGN_RSA_PKCS1_MD5_SHA1 0xff01 /* SSL_CTX_set_signing_algorithm_prefs configures |ctx| to use |prefs| as the * preference list when signing with |ctx|'s private key. It returns one on * success and zero on error. |prefs| should not include the internal-only value * |SSL_SIGN_RSA_PKCS1_MD5_SHA1|. */ OPENSSL_EXPORT int SSL_CTX_set_signing_algorithm_prefs(SSL_CTX *ctx, const uint16_t *prefs, size_t num_prefs); /* SSL_set_signing_algorithm_prefs configures |ssl| to use |prefs| as the * preference list when signing with |ssl|'s private key. It returns one on * success and zero on error. |prefs| should not include the internal-only value * |SSL_SIGN_RSA_PKCS1_MD5_SHA1|. */ OPENSSL_EXPORT int SSL_set_signing_algorithm_prefs(SSL *ssl, const uint16_t *prefs, size_t num_prefs); /* Certificate and private key convenience functions. */ /* SSL_CTX_use_RSAPrivateKey sets |ctx|'s private key to |rsa|. It returns one * on success and zero on failure. */ OPENSSL_EXPORT int SSL_CTX_use_RSAPrivateKey(SSL_CTX *ctx, RSA *rsa); /* SSL_use_RSAPrivateKey sets |ctx|'s private key to |rsa|. It returns one on * success and zero on failure. */ OPENSSL_EXPORT int SSL_use_RSAPrivateKey(SSL *ssl, RSA *rsa); /* The following functions configure certificates or private keys but take as * input DER-encoded structures. They return one on success and zero on * failure. */ OPENSSL_EXPORT int SSL_CTX_use_certificate_ASN1(SSL_CTX *ctx, size_t der_len, const uint8_t *der); OPENSSL_EXPORT int SSL_use_certificate_ASN1(SSL *ssl, const uint8_t *der, size_t der_len); OPENSSL_EXPORT int SSL_CTX_use_PrivateKey_ASN1(int pk, SSL_CTX *ctx, const uint8_t *der, size_t der_len); OPENSSL_EXPORT int SSL_use_PrivateKey_ASN1(int type, SSL *ssl, const uint8_t *der, size_t der_len); OPENSSL_EXPORT int SSL_CTX_use_RSAPrivateKey_ASN1(SSL_CTX *ctx, const uint8_t *der, size_t der_len); OPENSSL_EXPORT int SSL_use_RSAPrivateKey_ASN1(SSL *ssl, const uint8_t *der, size_t der_len); /* The following functions configure certificates or private keys but take as * input files to read from. They return one on success and zero on failure. The * |type| parameter is one of the |SSL_FILETYPE_*| values and determines whether * the file's contents are read as PEM or DER. */ #define SSL_FILETYPE_ASN1 X509_FILETYPE_ASN1 #define SSL_FILETYPE_PEM X509_FILETYPE_PEM OPENSSL_EXPORT int SSL_CTX_use_RSAPrivateKey_file(SSL_CTX *ctx, const char *file, int type); OPENSSL_EXPORT int SSL_use_RSAPrivateKey_file(SSL *ssl, const char *file, int type); OPENSSL_EXPORT int SSL_CTX_use_certificate_file(SSL_CTX *ctx, const char *file, int type); OPENSSL_EXPORT int SSL_use_certificate_file(SSL *ssl, const char *file, int type); OPENSSL_EXPORT int SSL_CTX_use_PrivateKey_file(SSL_CTX *ctx, const char *file, int type); OPENSSL_EXPORT int SSL_use_PrivateKey_file(SSL *ssl, const char *file, int type); /* SSL_CTX_use_certificate_chain_file configures certificates for |ctx|. It * reads the contents of |file| as a PEM-encoded leaf certificate followed * optionally by the certificate chain to send to the peer. It returns one on * success and zero on failure. */ OPENSSL_EXPORT int SSL_CTX_use_certificate_chain_file(SSL_CTX *ctx, const char *file); /* SSL_CTX_set_default_passwd_cb sets the password callback for PEM-based * convenience functions called on |ctx|. */ OPENSSL_EXPORT void SSL_CTX_set_default_passwd_cb(SSL_CTX *ctx, pem_password_cb *cb); /* SSL_CTX_set_default_passwd_cb_userdata sets the userdata parameter for * |ctx|'s password callback. */ OPENSSL_EXPORT void SSL_CTX_set_default_passwd_cb_userdata(SSL_CTX *ctx, void *data); /* Custom private keys. */ enum ssl_private_key_result_t { ssl_private_key_success, ssl_private_key_retry, ssl_private_key_failure, }; /* SSL_PRIVATE_KEY_METHOD describes private key hooks. This is used to off-load * signing operations to a custom, potentially asynchronous, backend. */ typedef struct ssl_private_key_method_st { /* type returns the type of the key used by |ssl|. For RSA keys, return * |NID_rsaEncryption|. For ECDSA keys, return |NID_X9_62_prime256v1|, * |NID_secp384r1|, or |NID_secp521r1|, depending on the curve. * * Returning |EVP_PKEY_EC| for ECDSA keys is deprecated and may result in * connection failures in TLS 1.3. */ int (*type)(SSL *ssl); /* max_signature_len returns the maximum length of a signature signed by the * key used by |ssl|. This must be a constant value for a given |ssl|. */ size_t (*max_signature_len)(SSL *ssl); /* sign signs the message |in| in using the specified signature algorithm. On * success, it returns |ssl_private_key_success| and writes at most |max_out| * bytes of signature data to |out| and sets |*out_len| to the number of bytes * written. On failure, it returns |ssl_private_key_failure|. If the operation * has not completed, it returns |ssl_private_key_retry|. |sign| should * arrange for the high-level operation on |ssl| to be retried when the * operation is completed. This will result in a call to |complete|. * * |signature_algorithm| is one of the |SSL_SIGN_*| values, as defined in TLS * 1.3. Note that, in TLS 1.2, ECDSA algorithms do not require that curve * sizes match hash sizes, so the curve portion of |SSL_SIGN_ECDSA_*| values * must be ignored. BoringSSL will internally handle the curve matching logic * where appropriate. * * It is an error to call |sign| while another private key operation is in * progress on |ssl|. */ enum ssl_private_key_result_t (*sign)(SSL *ssl, uint8_t *out, size_t *out_len, size_t max_out, uint16_t signature_algorithm, const uint8_t *in, size_t in_len); /* sign_digest signs |in_len| bytes of digest from |in|. |md| is the hash * function used to calculate |in|. On success, it returns * |ssl_private_key_success| and writes at most |max_out| bytes of signature * data to |out|. On failure, it returns |ssl_private_key_failure|. If the * operation has not completed, it returns |ssl_private_key_retry|. |sign| * should arrange for the high-level operation on |ssl| to be retried when the * operation is completed. This will result in a call to |complete|. * * If the key is an RSA key, implementations must use PKCS#1 padding. |in| is * the digest itself, so the DigestInfo prefix, if any, must be prepended by * |sign|. If |md| is |EVP_md5_sha1|, there is no prefix. * * It is an error to call |sign_digest| while another private key operation is * in progress on |ssl|. * * This function is deprecated. Implement |sign| instead. * * TODO(davidben): Remove this function. */ enum ssl_private_key_result_t (*sign_digest)(SSL *ssl, uint8_t *out, size_t *out_len, size_t max_out, const EVP_MD *md, const uint8_t *in, size_t in_len); /* decrypt decrypts |in_len| bytes of encrypted data from |in|. On success it * returns |ssl_private_key_success|, writes at most |max_out| bytes of * decrypted data to |out| and sets |*out_len| to the actual number of bytes * written. On failure it returns |ssl_private_key_failure|. If the operation * has not completed, it returns |ssl_private_key_retry|. The caller should * arrange for the high-level operation on |ssl| to be retried when the * operation is completed, which will result in a call to |complete|. This * function only works with RSA keys and should perform a raw RSA decryption * operation with no padding. * * It is an error to call |decrypt| while another private key operation is in * progress on |ssl|. */ enum ssl_private_key_result_t (*decrypt)(SSL *ssl, uint8_t *out, size_t *out_len, size_t max_out, const uint8_t *in, size_t in_len); /* complete completes a pending operation. If the operation has completed, it * returns |ssl_private_key_success| and writes the result to |out| as in * |sign|. Otherwise, it returns |ssl_private_key_failure| on failure and * |ssl_private_key_retry| if the operation is still in progress. * * |complete| may be called arbitrarily many times before completion, but it * is an error to call |complete| if there is no pending operation in progress * on |ssl|. */ enum ssl_private_key_result_t (*complete)(SSL *ssl, uint8_t *out, size_t *out_len, size_t max_out); } SSL_PRIVATE_KEY_METHOD; /* SSL_set_private_key_method configures a custom private key on |ssl|. * |key_method| must remain valid for the lifetime of |ssl|. */ OPENSSL_EXPORT void SSL_set_private_key_method( SSL *ssl, const SSL_PRIVATE_KEY_METHOD *key_method); /* SSL_CTX_set_private_key_method configures a custom private key on |ctx|. * |key_method| must remain valid for the lifetime of |ctx|. */ OPENSSL_EXPORT void SSL_CTX_set_private_key_method( SSL_CTX *ctx, const SSL_PRIVATE_KEY_METHOD *key_method); /* Cipher suites. * * |SSL_CIPHER| objects represent cipher suites. */ DECLARE_STACK_OF(SSL_CIPHER) /* SSL_get_cipher_by_value returns the structure representing a TLS cipher * suite based on its assigned number, or NULL if unknown. See * https://www.iana.org/assignments/tls-parameters/tls-parameters.xhtml#tls-parameters-4. */ OPENSSL_EXPORT const SSL_CIPHER *SSL_get_cipher_by_value(uint16_t value); /* SSL_CIPHER_get_id returns |cipher|'s id. It may be cast to a |uint16_t| to * get the cipher suite value. */ OPENSSL_EXPORT uint32_t SSL_CIPHER_get_id(const SSL_CIPHER *cipher); /* SSL_CIPHER_is_AES returns one if |cipher| uses AES (either GCM or CBC * mode). */ OPENSSL_EXPORT int SSL_CIPHER_is_AES(const SSL_CIPHER *cipher); /* SSL_CIPHER_has_SHA1_HMAC returns one if |cipher| uses HMAC-SHA1. */ OPENSSL_EXPORT int SSL_CIPHER_has_SHA1_HMAC(const SSL_CIPHER *cipher); /* SSL_CIPHER_has_SHA256_HMAC returns one if |cipher| uses HMAC-SHA256. */ OPENSSL_EXPORT int SSL_CIPHER_has_SHA256_HMAC(const SSL_CIPHER *cipher); /* SSL_CIPHER_is_AEAD returns one if |cipher| uses an AEAD cipher. */ OPENSSL_EXPORT int SSL_CIPHER_is_AEAD(const SSL_CIPHER *cipher); /* SSL_CIPHER_is_AESGCM returns one if |cipher| uses AES-GCM. */ OPENSSL_EXPORT int SSL_CIPHER_is_AESGCM(const SSL_CIPHER *cipher); /* SSL_CIPHER_is_AES128GCM returns one if |cipher| uses 128-bit AES-GCM. */ OPENSSL_EXPORT int SSL_CIPHER_is_AES128GCM(const SSL_CIPHER *cipher); /* SSL_CIPHER_is_AES128CBC returns one if |cipher| uses 128-bit AES in CBC * mode. */ OPENSSL_EXPORT int SSL_CIPHER_is_AES128CBC(const SSL_CIPHER *cipher); /* SSL_CIPHER_is_AES256CBC returns one if |cipher| uses 256-bit AES in CBC * mode. */ OPENSSL_EXPORT int SSL_CIPHER_is_AES256CBC(const SSL_CIPHER *cipher); /* SSL_CIPHER_is_CHACHA20POLY1305 returns one if |cipher| uses * CHACHA20_POLY1305. Note this includes both the RFC 7905 and * draft-agl-tls-chacha20poly1305-04 versions. */ OPENSSL_EXPORT int SSL_CIPHER_is_CHACHA20POLY1305(const SSL_CIPHER *cipher); /* SSL_CIPHER_is_NULL returns one if |cipher| does not encrypt. */ OPENSSL_EXPORT int SSL_CIPHER_is_NULL(const SSL_CIPHER *cipher); /* SSL_CIPHER_is_block_cipher returns one if |cipher| is a block cipher. */ OPENSSL_EXPORT int SSL_CIPHER_is_block_cipher(const SSL_CIPHER *cipher); /* SSL_CIPHER_is_ECDSA returns one if |cipher| uses ECDSA. */ OPENSSL_EXPORT int SSL_CIPHER_is_ECDSA(const SSL_CIPHER *cipher); /* SSL_CIPHER_is_DHE returns one if |cipher| uses DHE. */ OPENSSL_EXPORT int SSL_CIPHER_is_DHE(const SSL_CIPHER *cipher); /* SSL_CIPHER_is_ECDHE returns one if |cipher| uses ECDHE. */ OPENSSL_EXPORT int SSL_CIPHER_is_ECDHE(const SSL_CIPHER *cipher); /* SSL_CIPHER_is_static_RSA returns one if |cipher| uses the static RSA key * exchange. */ OPENSSL_EXPORT int SSL_CIPHER_is_static_RSA(const SSL_CIPHER *cipher); /* SSL_CIPHER_get_min_version returns the minimum protocol version required * for |cipher|. */ OPENSSL_EXPORT uint16_t SSL_CIPHER_get_min_version(const SSL_CIPHER *cipher); /* SSL_CIPHER_get_max_version returns the maximum protocol version that * supports |cipher|. */ OPENSSL_EXPORT uint16_t SSL_CIPHER_get_max_version(const SSL_CIPHER *cipher); /* SSL_CIPHER_get_name returns the OpenSSL name of |cipher|. */ OPENSSL_EXPORT const char *SSL_CIPHER_get_name(const SSL_CIPHER *cipher); /* SSL_CIPHER_get_kx_name returns a string that describes the key-exchange * method used by |cipher|. For example, "ECDHE_ECDSA". TLS 1.3 AEAD-only * ciphers return the string "GENERIC". */ OPENSSL_EXPORT const char *SSL_CIPHER_get_kx_name(const SSL_CIPHER *cipher); /* SSL_CIPHER_get_rfc_name returns a newly-allocated string with the standard * name for |cipher| or NULL on error. For example, * "TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256". The caller is responsible for * calling |OPENSSL_free| on the result. */ OPENSSL_EXPORT char *SSL_CIPHER_get_rfc_name(const SSL_CIPHER *cipher); /* SSL_CIPHER_get_bits returns the strength, in bits, of |cipher|. If * |out_alg_bits| is not NULL, it writes the number of bits consumed by the * symmetric algorithm to |*out_alg_bits|. */ OPENSSL_EXPORT int SSL_CIPHER_get_bits(const SSL_CIPHER *cipher, int *out_alg_bits); /* Cipher suite configuration. * * OpenSSL uses a mini-language to configure cipher suites. The language * maintains an ordered list of enabled ciphers, along with an ordered list of * disabled but available ciphers. Initially, all ciphers are disabled with a * default ordering. The cipher string is then interpreted as a sequence of * directives, separated by colons, each of which modifies this state. * * Most directives consist of a one character or empty opcode followed by a * selector which matches a subset of available ciphers. * * Available opcodes are: * * The empty opcode enables and appends all matching disabled ciphers to the * end of the enabled list. The newly appended ciphers are ordered relative to * each other matching their order in the disabled list. * * |-| disables all matching enabled ciphers and prepends them to the disabled * list, with relative order from the enabled list preserved. This means the * most recently disabled ciphers get highest preference relative to other * disabled ciphers if re-enabled. * * |+| moves all matching enabled ciphers to the end of the enabled list, with * relative order preserved. * * |!| deletes all matching ciphers, enabled or not, from either list. Deleted * ciphers will not matched by future operations. * * A selector may be a specific cipher (using the OpenSSL name for the cipher) * or one or more rules separated by |+|. The final selector matches the * intersection of each rule. For instance, |AESGCM+aECDSA| matches * ECDSA-authenticated AES-GCM ciphers. * * Available cipher rules are: * * |ALL| matches all ciphers. * * |kRSA|, |kDHE|, |kECDHE|, and |kPSK| match ciphers using plain RSA, DHE, * ECDHE, and plain PSK key exchanges, respectively. Note that ECDHE_PSK is * matched by |kECDHE| and not |kPSK|. * * |aRSA|, |aECDSA|, and |aPSK| match ciphers authenticated by RSA, ECDSA, and * a pre-shared key, respectively. * * |RSA|, |DHE|, |ECDHE|, |PSK|, |ECDSA|, and |PSK| are aliases for the * corresponding |k*| or |a*| cipher rule. |RSA| is an alias for |kRSA|, not * |aRSA|. * * |3DES|, |AES128|, |AES256|, |AES|, |AESGCM|, |CHACHA20| match ciphers * whose bulk cipher use the corresponding encryption scheme. Note that * |AES|, |AES128|, and |AES256| match both CBC and GCM ciphers. * * |SHA1|, |SHA256|, and |SHA384| match legacy cipher suites using the * corresponding hash function in their MAC. AEADs are matched by none of * these. * * |SHA| is an alias for |SHA1|. * * Although implemented, authentication-only ciphers match no rules and must be * explicitly selected by name. * * Deprecated cipher rules: * * |kEDH|, |EDH|, |kEECDH|, and |EECDH| are legacy aliases for |kDHE|, |DHE|, * |kECDHE|, and |ECDHE|, respectively. * * |HIGH| is an alias for |ALL|. * * |FIPS| is an alias for |HIGH|. * * |SSLv3| and |TLSv1| match ciphers available in TLS 1.1 or earlier. * |TLSv1_2| matches ciphers new in TLS 1.2. This is confusing and should not * be used. * * Unknown rules are silently ignored by legacy APIs, and rejected by APIs with * "strict" in the name, which should be preferred. Cipher lists can be long and * it's easy to commit typos. * * The special |@STRENGTH| directive will sort all enabled ciphers by strength. * * The |DEFAULT| directive, when appearing at the front of the string, expands * to the default ordering of available ciphers. * * If configuring a server, one may also configure equal-preference groups to * partially respect the client's preferences when * |SSL_OP_CIPHER_SERVER_PREFERENCE| is enabled. Ciphers in an equal-preference * group have equal priority and use the client order. This may be used to * enforce that AEADs are preferred but select AES-GCM vs. ChaCha20-Poly1305 * based on client preferences. An equal-preference is specified with square * brackets, combining multiple selectors separated by |. For example: * * [ECDHE-ECDSA-CHACHA20-POLY1305|ECDHE-ECDSA-AES128-GCM-SHA256] * * Once an equal-preference group is used, future directives must be * opcode-less. * * TLS 1.3 ciphers do not participate in this mechanism and instead have a * built-in preference order. Functions to set cipher lists do not affect TLS * 1.3, and functions to query the cipher list do not include TLS 1.3 * ciphers. */ /* SSL_DEFAULT_CIPHER_LIST is the default cipher suite configuration. It is * substituted when a cipher string starts with 'DEFAULT'. */ #define SSL_DEFAULT_CIPHER_LIST "ALL" /* SSL_CTX_set_strict_cipher_list configures the cipher list for |ctx|, * evaluating |str| as a cipher string and returning error if |str| contains * anything meaningless. It returns one on success and zero on failure. */ OPENSSL_EXPORT int SSL_CTX_set_strict_cipher_list(SSL_CTX *ctx, const char *str); /* SSL_CTX_set_cipher_list configures the cipher list for |ctx|, evaluating * |str| as a cipher string. It returns one on success and zero on failure. * * Prefer to use |SSL_CTX_set_strict_cipher_list|. This function tolerates * garbage inputs, unless an empty cipher list results. */ OPENSSL_EXPORT int SSL_CTX_set_cipher_list(SSL_CTX *ctx, const char *str); /* SSL_set_strict_cipher_list configures the cipher list for |ssl|, evaluating * |str| as a cipher string and returning error if |str| contains anything * meaningless. It returns one on success and zero on failure. */ OPENSSL_EXPORT int SSL_set_strict_cipher_list(SSL *ssl, const char *str); /* SSL_set_cipher_list configures the cipher list for |ssl|, evaluating |str| as * a cipher string. It returns one on success and zero on failure. * * Prefer to use |SSL_set_strict_cipher_list|. This function tolerates garbage * inputs, unless an empty cipher list results. */ OPENSSL_EXPORT int SSL_set_cipher_list(SSL *ssl, const char *str); /* SSL_get_ciphers returns the cipher list for |ssl|, in order of preference. */ OPENSSL_EXPORT STACK_OF(SSL_CIPHER) *SSL_get_ciphers(const SSL *ssl); /* Connection information. */ /* SSL_is_init_finished returns one if |ssl| has completed its initial handshake * and has no pending handshake. It returns zero otherwise. */ OPENSSL_EXPORT int SSL_is_init_finished(const SSL *ssl); /* SSL_in_init returns one if |ssl| has a pending handshake and zero * otherwise. */ OPENSSL_EXPORT int SSL_in_init(const SSL *ssl); /* SSL_in_false_start returns one if |ssl| has a pending handshake that is in * False Start. |SSL_write| may be called at this point without waiting for the * peer, but |SSL_read| will complete the handshake before accepting application * data. * * See also |SSL_MODE_ENABLE_FALSE_START|. */ OPENSSL_EXPORT int SSL_in_false_start(const SSL *ssl); /* SSL_get_peer_certificate returns the peer's leaf certificate or NULL if the * peer did not use certificates. The caller must call |X509_free| on the * result to release it. */ OPENSSL_EXPORT X509 *SSL_get_peer_certificate(const SSL *ssl); /* SSL_get_peer_cert_chain returns the peer's certificate chain or NULL if * unavailable or the peer did not use certificates. This is the unverified * list of certificates as sent by the peer, not the final chain built during * verification. For historical reasons, this value may not be available if * resuming a serialized |SSL_SESSION|. The caller does not take ownership of * the result. * * WARNING: This function behaves differently between client and server. If * |ssl| is a server, the returned chain does not include the leaf certificate. * If a client, it does. */ OPENSSL_EXPORT STACK_OF(X509) *SSL_get_peer_cert_chain(const SSL *ssl); /* SSL_get_peer_full_cert_chain returns the peer's certificate chain, or NULL if * unavailable or the peer did not use certificates. This is the unverified * list of certificates as sent by the peer, not the final chain built during * verification. For historical reasons, this value may not be available if * resuming a serialized |SSL_SESSION|. The caller does not take ownership of * the result. * * This is the same as |SSL_get_peer_cert_chain| except that this function * always returns the full chain, i.e. the first element of the return value * (if any) will be the leaf certificate. In constrast, * |SSL_get_peer_cert_chain| returns only the intermediate certificates if the * |ssl| is a server. */ OPENSSL_EXPORT STACK_OF(X509) *SSL_get_peer_full_cert_chain(const SSL *ssl); /* SSL_get0_signed_cert_timestamp_list sets |*out| and |*out_len| to point to * |*out_len| bytes of SCT information from the server. This is only valid if * |ssl| is a client. The SCT information is a SignedCertificateTimestampList * (including the two leading length bytes). * See https://tools.ietf.org/html/rfc6962#section-3.3 * If no SCT was received then |*out_len| will be zero on return. * * WARNING: the returned data is not guaranteed to be well formed. */ OPENSSL_EXPORT void SSL_get0_signed_cert_timestamp_list(const SSL *ssl, const uint8_t **out, size_t *out_len); /* SSL_get0_ocsp_response sets |*out| and |*out_len| to point to |*out_len| * bytes of an OCSP response from the server. This is the DER encoding of an * OCSPResponse type as defined in RFC 2560. * * WARNING: the returned data is not guaranteed to be well formed. */ OPENSSL_EXPORT void SSL_get0_ocsp_response(const SSL *ssl, const uint8_t **out, size_t *out_len); /* SSL_get_tls_unique writes at most |max_out| bytes of the tls-unique value * for |ssl| to |out| and sets |*out_len| to the number of bytes written. It * returns one on success or zero on error. In general |max_out| should be at * least 12. * * This function will always fail if the initial handshake has not completed. * The tls-unique value will change after a renegotiation but, since * renegotiations can be initiated by the server at any point, the higher-level * protocol must either leave them disabled or define states in which the * tls-unique value can be read. * * The tls-unique value is defined by * https://tools.ietf.org/html/rfc5929#section-3.1. Due to a weakness in the * TLS protocol, tls-unique is broken for resumed connections unless the * Extended Master Secret extension is negotiated. Thus this function will * return zero if |ssl| performed session resumption unless EMS was used when * negotiating the original session. */ OPENSSL_EXPORT int SSL_get_tls_unique(const SSL *ssl, uint8_t *out, size_t *out_len, size_t max_out); /* SSL_get_extms_support returns one if the Extended Master Secret extension or * TLS 1.3 was negotiated. Otherwise, it returns zero. */ OPENSSL_EXPORT int SSL_get_extms_support(const SSL *ssl); /* SSL_get_current_cipher returns the cipher used in the current outgoing * connection state, or NULL if the null cipher is active. */ OPENSSL_EXPORT const SSL_CIPHER *SSL_get_current_cipher(const SSL *ssl); /* SSL_session_reused returns one if |ssl| performed an abbreviated handshake * and zero otherwise. * * TODO(davidben): Hammer down the semantics of this API while a handshake, * initial or renego, is in progress. */ OPENSSL_EXPORT int SSL_session_reused(const SSL *ssl); /* SSL_get_secure_renegotiation_support returns one if the peer supports secure * renegotiation (RFC 5746) or TLS 1.3. Otherwise, it returns zero. */ OPENSSL_EXPORT int SSL_get_secure_renegotiation_support(const SSL *ssl); /* SSL_export_keying_material exports a value derived from the master secret, as * specified in RFC 5705. It writes |out_len| bytes to |out| given a label and * optional context. (Since a zero length context is allowed, the |use_context| * flag controls whether a context is included.) * * It returns one on success and zero otherwise. */ OPENSSL_EXPORT int SSL_export_keying_material( SSL *ssl, uint8_t *out, size_t out_len, const char *label, size_t label_len, const uint8_t *context, size_t context_len, int use_context); /* Custom extensions. * * The custom extension functions allow TLS extensions to be added to * ClientHello and ServerHello messages. */ /* SSL_custom_ext_add_cb is a callback function that is called when the * ClientHello (for clients) or ServerHello (for servers) is constructed. In * the case of a server, this callback will only be called for a given * extension if the ClientHello contained that extension – it's not possible to * inject extensions into a ServerHello that the client didn't request. * * When called, |extension_value| will contain the extension number that is * being considered for addition (so that a single callback can handle multiple * extensions). If the callback wishes to include the extension, it must set * |*out| to point to |*out_len| bytes of extension contents and return one. In * this case, the corresponding |SSL_custom_ext_free_cb| callback will later be * called with the value of |*out| once that data has been copied. * * If the callback does not wish to add an extension it must return zero. * * Alternatively, the callback can abort the connection by setting * |*out_alert_value| to a TLS alert number and returning -1. */ typedef int (*SSL_custom_ext_add_cb)(SSL *ssl, unsigned extension_value, const uint8_t **out, size_t *out_len, int *out_alert_value, void *add_arg); /* SSL_custom_ext_free_cb is a callback function that is called by OpenSSL iff * an |SSL_custom_ext_add_cb| callback previously returned one. In that case, * this callback is called and passed the |out| pointer that was returned by * the add callback. This is to free any dynamically allocated data created by * the add callback. */ typedef void (*SSL_custom_ext_free_cb)(SSL *ssl, unsigned extension_value, const uint8_t *out, void *add_arg); /* SSL_custom_ext_parse_cb is a callback function that is called by OpenSSL to * parse an extension from the peer: that is from the ServerHello for a client * and from the ClientHello for a server. * * When called, |extension_value| will contain the extension number and the * contents of the extension are |contents_len| bytes at |contents|. * * The callback must return one to continue the handshake. Otherwise, if it * returns zero, a fatal alert with value |*out_alert_value| is sent and the * handshake is aborted. */ typedef int (*SSL_custom_ext_parse_cb)(SSL *ssl, unsigned extension_value, const uint8_t *contents, size_t contents_len, int *out_alert_value, void *parse_arg); /* SSL_extension_supported returns one iff OpenSSL internally handles * extensions of type |extension_value|. This can be used to avoid registering * custom extension handlers for extensions that a future version of OpenSSL * may handle internally. */ OPENSSL_EXPORT int SSL_extension_supported(unsigned extension_value); /* SSL_CTX_add_client_custom_ext registers callback functions for handling * custom TLS extensions for client connections. * * If |add_cb| is NULL then an empty extension will be added in each * ClientHello. Otherwise, see the comment for |SSL_custom_ext_add_cb| about * this callback. * * The |free_cb| may be NULL if |add_cb| doesn't dynamically allocate data that * needs to be freed. * * It returns one on success or zero on error. It's always an error to register * callbacks for the same extension twice, or to register callbacks for an * extension that OpenSSL handles internally. See |SSL_extension_supported| to * discover, at runtime, which extensions OpenSSL handles internally. */ OPENSSL_EXPORT int SSL_CTX_add_client_custom_ext( SSL_CTX *ctx, unsigned extension_value, SSL_custom_ext_add_cb add_cb, SSL_custom_ext_free_cb free_cb, void *add_arg, SSL_custom_ext_parse_cb parse_cb, void *parse_arg); /* SSL_CTX_add_server_custom_ext is the same as * |SSL_CTX_add_client_custom_ext|, but for server connections. * * Unlike on the client side, if |add_cb| is NULL no extension will be added. * The |add_cb|, if any, will only be called if the ClientHello contained a * matching extension. */ OPENSSL_EXPORT int SSL_CTX_add_server_custom_ext( SSL_CTX *ctx, unsigned extension_value, SSL_custom_ext_add_cb add_cb, SSL_custom_ext_free_cb free_cb, void *add_arg, SSL_custom_ext_parse_cb parse_cb, void *parse_arg); /* Sessions. * * An |SSL_SESSION| represents an SSL session that may be resumed in an * abbreviated handshake. It is reference-counted and immutable. Once * established, an |SSL_SESSION| may be shared by multiple |SSL| objects on * different threads and must not be modified. */ DECLARE_LHASH_OF(SSL_SESSION) DECLARE_PEM_rw(SSL_SESSION, SSL_SESSION) /* SSL_SESSION_new returns a newly-allocated blank |SSL_SESSION| or NULL on * error. This may be useful when writing tests but should otherwise not be * used. */ OPENSSL_EXPORT SSL_SESSION *SSL_SESSION_new(const SSL_CTX *ctx); /* SSL_SESSION_up_ref increments the reference count of |session| and returns * one. */ OPENSSL_EXPORT int SSL_SESSION_up_ref(SSL_SESSION *session); /* SSL_SESSION_free decrements the reference count of |session|. If it reaches * zero, all data referenced by |session| and |session| itself are released. */ OPENSSL_EXPORT void SSL_SESSION_free(SSL_SESSION *session); /* SSL_SESSION_to_bytes serializes |in| into a newly allocated buffer and sets * |*out_data| to that buffer and |*out_len| to its length. The caller takes * ownership of the buffer and must call |OPENSSL_free| when done. It returns * one on success and zero on error. */ OPENSSL_EXPORT int SSL_SESSION_to_bytes(const SSL_SESSION *in, uint8_t **out_data, size_t *out_len); /* SSL_SESSION_to_bytes_for_ticket serializes |in|, but excludes the session * identification information, namely the session ID and ticket. */ OPENSSL_EXPORT int SSL_SESSION_to_bytes_for_ticket(const SSL_SESSION *in, uint8_t **out_data, size_t *out_len); /* SSL_SESSION_from_bytes parses |in_len| bytes from |in| as an SSL_SESSION. It * returns a newly-allocated |SSL_SESSION| on success or NULL on error. */ OPENSSL_EXPORT SSL_SESSION *SSL_SESSION_from_bytes( const uint8_t *in, size_t in_len, const SSL_CTX *ctx); /* SSL_SESSION_get_version returns a string describing the TLS version |session| * was established at. For example, "TLSv1.2" or "SSLv3". */ OPENSSL_EXPORT const char *SSL_SESSION_get_version(const SSL_SESSION *session); /* SSL_SESSION_get_id returns a pointer to a buffer containing |session|'s * session ID and sets |*out_len| to its length. */ OPENSSL_EXPORT const uint8_t *SSL_SESSION_get_id(const SSL_SESSION *session, unsigned *out_len); /* SSL_SESSION_get_time returns the time at which |session| was established in * seconds since the UNIX epoch. */ OPENSSL_EXPORT long SSL_SESSION_get_time(const SSL_SESSION *session); /* SSL_SESSION_get_timeout returns the lifetime of |session| in seconds. */ OPENSSL_EXPORT long SSL_SESSION_get_timeout(const SSL_SESSION *session); /* SSL_SESSION_get0_peer returns the peer leaf certificate stored in * |session|. * * TODO(davidben): This should return a const X509 *. */ OPENSSL_EXPORT X509 *SSL_SESSION_get0_peer(const SSL_SESSION *session); /* SSL_SESSION_get_master_key writes up to |max_out| bytes of |session|'s master * secret to |out| and returns the number of bytes written. If |max_out| is * zero, it returns the size of the master secret. */ OPENSSL_EXPORT size_t SSL_SESSION_get_master_key(const SSL_SESSION *session, uint8_t *out, size_t max_out); /* SSL_SESSION_set_time sets |session|'s creation time to |time| and returns * |time|. This function may be useful in writing tests but otherwise should not * be used. */ OPENSSL_EXPORT long SSL_SESSION_set_time(SSL_SESSION *session, long time); /* SSL_SESSION_set_timeout sets |session|'s timeout to |timeout| and returns * one. This function may be useful in writing tests but otherwise should not * be used. */ OPENSSL_EXPORT long SSL_SESSION_set_timeout(SSL_SESSION *session, long timeout); /* SSL_SESSION_set1_id_context sets |session|'s session ID context (see * |SSL_CTX_set_session_id_context|) to |sid_ctx|. It returns one on success and * zero on error. This function may be useful in writing tests but otherwise * should not be used. */ OPENSSL_EXPORT int SSL_SESSION_set1_id_context(SSL_SESSION *session, const uint8_t *sid_ctx, size_t sid_ctx_len); /* Session caching. * * Session caching allows clients to reconnect to a server based on saved * parameters from a previous connection. * * For a server, the library implements a built-in internal session cache as an * in-memory hash table. One may also register callbacks to implement a custom * external session cache. An external cache may be used in addition to or * instead of the internal one. Use |SSL_CTX_set_session_cache_mode| to toggle * the internal cache. * * For a client, the only option is an external session cache. Prior to * handshaking, the consumer should look up a session externally (keyed, for * instance, by hostname) and use |SSL_set_session| to configure which session * to offer. The callbacks may be used to determine when new sessions are * available. * * Note that offering or accepting a session short-circuits most parameter * negotiation. Resuming sessions across different configurations may result in * surprising behavior. So, for instance, a client implementing a version * fallback should shard its session cache by maximum protocol version. */ /* SSL_SESS_CACHE_OFF disables all session caching. */ #define SSL_SESS_CACHE_OFF 0x0000 /* SSL_SESS_CACHE_CLIENT enables session caching for a client. The internal * cache is never used on a client, so this only enables the callbacks. */ #define SSL_SESS_CACHE_CLIENT 0x0001 /* SSL_SESS_CACHE_SERVER enables session caching for a server. */ #define SSL_SESS_CACHE_SERVER 0x0002 /* SSL_SESS_CACHE_BOTH enables session caching for both client and server. */ #define SSL_SESS_CACHE_BOTH (SSL_SESS_CACHE_CLIENT | SSL_SESS_CACHE_SERVER) /* SSL_SESS_CACHE_NO_AUTO_CLEAR disables automatically calling * |SSL_CTX_flush_sessions| every 255 connections. */ #define SSL_SESS_CACHE_NO_AUTO_CLEAR 0x0080 /* SSL_SESS_CACHE_NO_INTERNAL_LOOKUP, on a server, disables looking up a session * from the internal session cache. */ #define SSL_SESS_CACHE_NO_INTERNAL_LOOKUP 0x0100 /* SSL_SESS_CACHE_NO_INTERNAL_STORE, on a server, disables storing sessions in * the internal session cache. */ #define SSL_SESS_CACHE_NO_INTERNAL_STORE 0x0200 /* SSL_SESS_CACHE_NO_INTERNAL, on a server, disables the internal session * cache. */ #define SSL_SESS_CACHE_NO_INTERNAL \ (SSL_SESS_CACHE_NO_INTERNAL_LOOKUP | SSL_SESS_CACHE_NO_INTERNAL_STORE) /* SSL_CTX_set_session_cache_mode sets the session cache mode bits for |ctx| to * |mode|. It returns the previous value. */ OPENSSL_EXPORT int SSL_CTX_set_session_cache_mode(SSL_CTX *ctx, int mode); /* SSL_CTX_get_session_cache_mode returns the session cache mode bits for * |ctx| */ OPENSSL_EXPORT int SSL_CTX_get_session_cache_mode(const SSL_CTX *ctx); /* SSL_set_session, for a client, configures |ssl| to offer to resume |session| * in the initial handshake and returns one. The caller retains ownership of * |session|. * * It is an error to call this function after the handshake has begun. */ OPENSSL_EXPORT int SSL_set_session(SSL *ssl, SSL_SESSION *session); /* SSL_get_session returns a non-owning pointer to |ssl|'s session. For * historical reasons, which session it returns depends on |ssl|'s state. * * Prior to the start of the initial handshake, it returns the session the * caller set with |SSL_set_session|. After the initial handshake has finished * and if no additional handshakes are in progress, it returns the currently * active session. Its behavior is undefined while a handshake is in progress. * * Using this function to add new sessions to an external session cache is * deprecated. Use |SSL_CTX_sess_set_new_cb| instead. */ OPENSSL_EXPORT SSL_SESSION *SSL_get_session(const SSL *ssl); /* SSL_get0_session is an alias for |SSL_get_session|. */ #define SSL_get0_session SSL_get_session /* SSL_get1_session acts like |SSL_get_session| but returns a new reference to * the session. */ OPENSSL_EXPORT SSL_SESSION *SSL_get1_session(SSL *ssl); /* SSL_DEFAULT_SESSION_TIMEOUT is the default lifetime, in seconds, of a * session in TLS 1.2 or earlier. This is how long we are willing to use the * secret to encrypt traffic without fresh key material. */ #define SSL_DEFAULT_SESSION_TIMEOUT (2 * 60 * 60) /* SSL_DEFAULT_SESSION_PSK_DHE_TIMEOUT is the default lifetime, in seconds, of a * session for TLS 1.3 psk_dhe_ke. This is how long we are willing to use the * secret as an authenticator. */ #define SSL_DEFAULT_SESSION_PSK_DHE_TIMEOUT (2 * 24 * 60 * 60) /* SSL_DEFAULT_SESSION_AUTH_TIMEOUT is the default non-renewable lifetime, in * seconds, of a TLS 1.3 session. This is how long we are willing to trust the * signature in the initial handshake. */ #define SSL_DEFAULT_SESSION_AUTH_TIMEOUT (7 * 24 * 60 * 60) /* SSL_CTX_set_timeout sets the lifetime, in seconds, of TLS 1.2 (or earlier) * sessions created in |ctx| to |timeout|. */ OPENSSL_EXPORT long SSL_CTX_set_timeout(SSL_CTX *ctx, long timeout); /* SSL_CTX_set_session_psk_dhe_timeout sets the lifetime, in seconds, of TLS 1.3 * sessions created in |ctx| to |timeout|. */ OPENSSL_EXPORT void SSL_CTX_set_session_psk_dhe_timeout(SSL_CTX *ctx, long timeout); /* SSL_CTX_get_timeout returns the lifetime, in seconds, of TLS 1.2 (or earlier) * sessions created in |ctx|. */ OPENSSL_EXPORT long SSL_CTX_get_timeout(const SSL_CTX *ctx); /* SSL_CTX_set_session_id_context sets |ctx|'s session ID context to |sid_ctx|. * It returns one on success and zero on error. The session ID context is an * application-defined opaque byte string. A session will not be used in a * connection without a matching session ID context. * * For a server, if |SSL_VERIFY_PEER| is enabled, it is an error to not set a * session ID context. * * TODO(davidben): Is that check needed? That seems a special case of taking * care not to cross-resume across configuration changes, and this is only * relevant if a server requires client auth. */ OPENSSL_EXPORT int SSL_CTX_set_session_id_context(SSL_CTX *ctx, const uint8_t *sid_ctx, size_t sid_ctx_len); /* SSL_set_session_id_context sets |ssl|'s session ID context to |sid_ctx|. It * returns one on success and zero on error. See also * |SSL_CTX_set_session_id_context|. */ OPENSSL_EXPORT int SSL_set_session_id_context(SSL *ssl, const uint8_t *sid_ctx, size_t sid_ctx_len); /* SSL_get0_session_id_context returns a pointer to |ssl|'s session ID context * and sets |*out_len| to its length. */ OPENSSL_EXPORT const uint8_t *SSL_get0_session_id_context(const SSL *ssl, size_t *out_len); /* SSL_SESSION_CACHE_MAX_SIZE_DEFAULT is the default maximum size of a session * cache. */ #define SSL_SESSION_CACHE_MAX_SIZE_DEFAULT (1024 * 20) /* SSL_CTX_sess_set_cache_size sets the maximum size of |ctx|'s internal session * cache to |size|. It returns the previous value. */ OPENSSL_EXPORT unsigned long SSL_CTX_sess_set_cache_size(SSL_CTX *ctx, unsigned long size); /* SSL_CTX_sess_get_cache_size returns the maximum size of |ctx|'s internal * session cache. */ OPENSSL_EXPORT unsigned long SSL_CTX_sess_get_cache_size(const SSL_CTX *ctx); /* SSL_CTX_sessions returns |ctx|'s internal session cache. */ OPENSSL_EXPORT LHASH_OF(SSL_SESSION) *SSL_CTX_sessions(SSL_CTX *ctx); /* SSL_CTX_sess_number returns the number of sessions in |ctx|'s internal * session cache. */ OPENSSL_EXPORT size_t SSL_CTX_sess_number(const SSL_CTX *ctx); /* SSL_CTX_add_session inserts |session| into |ctx|'s internal session cache. It * returns one on success and zero on error or if |session| is already in the * cache. The caller retains its reference to |session|. */ OPENSSL_EXPORT int SSL_CTX_add_session(SSL_CTX *ctx, SSL_SESSION *session); /* SSL_CTX_remove_session removes |session| from |ctx|'s internal session cache. * It returns one on success and zero if |session| was not in the cache. */ OPENSSL_EXPORT int SSL_CTX_remove_session(SSL_CTX *ctx, SSL_SESSION *session); /* SSL_CTX_flush_sessions removes all sessions from |ctx| which have expired as * of time |time|. If |time| is zero, all sessions are removed. */ OPENSSL_EXPORT void SSL_CTX_flush_sessions(SSL_CTX *ctx, long time); /* SSL_CTX_sess_set_new_cb sets the callback to be called when a new session is * established and ready to be cached. If the session cache is disabled (the * appropriate one of |SSL_SESS_CACHE_CLIENT| or |SSL_SESS_CACHE_SERVER| is * unset), the callback is not called. * * The callback is passed a reference to |session|. It returns one if it takes * ownership and zero otherwise. * * Note: For a client, the callback may be called on abbreviated handshakes if a * ticket is renewed. Further, it may not be called until some time after * |SSL_do_handshake| or |SSL_connect| completes if False Start is enabled. Thus * it's recommended to use this callback over checking |SSL_session_reused| on * handshake completion. * * TODO(davidben): Conditioning callbacks on |SSL_SESS_CACHE_CLIENT| or * |SSL_SESS_CACHE_SERVER| doesn't make any sense when one could just as easily * not supply the callbacks. Removing that condition and the client internal * cache would simplify things. */ OPENSSL_EXPORT void SSL_CTX_sess_set_new_cb( SSL_CTX *ctx, int (*new_session_cb)(SSL *ssl, SSL_SESSION *session)); /* SSL_CTX_sess_get_new_cb returns the callback set by * |SSL_CTX_sess_set_new_cb|. */ OPENSSL_EXPORT int (*SSL_CTX_sess_get_new_cb(SSL_CTX *ctx))( SSL *ssl, SSL_SESSION *session); /* SSL_CTX_sess_set_remove_cb sets a callback which is called when a session is * removed from the internal session cache. * * TODO(davidben): What is the point of this callback? It seems useless since it * only fires on sessions in the internal cache. */ OPENSSL_EXPORT void SSL_CTX_sess_set_remove_cb( SSL_CTX *ctx, void (*remove_session_cb)(SSL_CTX *ctx, SSL_SESSION *session)); /* SSL_CTX_sess_get_remove_cb returns the callback set by * |SSL_CTX_sess_set_remove_cb|. */ OPENSSL_EXPORT void (*SSL_CTX_sess_get_remove_cb(SSL_CTX *ctx))( SSL_CTX *ctx, SSL_SESSION *session); /* SSL_CTX_sess_set_get_cb sets a callback to look up a session by ID for a * server. The callback is passed the session ID and should return a matching * |SSL_SESSION| or NULL if not found. It should set |*out_copy| to zero and * return a new reference to the session. This callback is not used for a * client. * * For historical reasons, if |*out_copy| is set to one (default), the SSL * library will take a new reference to the returned |SSL_SESSION|, expecting * the callback to return a non-owning pointer. This is not recommended. If * |ctx| and thus the callback is used on multiple threads, the session may be * removed and invalidated before the SSL library calls |SSL_SESSION_up_ref|, * whereas the callback may synchronize internally. * * To look up a session asynchronously, the callback may return * |SSL_magic_pending_session_ptr|. See the documentation for that function and * |SSL_ERROR_PENDING_SESSION|. * * If the internal session cache is enabled, the callback is only consulted if * the internal cache does not return a match. * * The callback's |id| parameter is not const for historical reasons, but the * contents may not be modified. */ OPENSSL_EXPORT void SSL_CTX_sess_set_get_cb( SSL_CTX *ctx, SSL_SESSION *(*get_session_cb)(SSL *ssl, uint8_t *id, int id_len, int *out_copy)); /* SSL_CTX_sess_get_get_cb returns the callback set by * |SSL_CTX_sess_set_get_cb|. */ OPENSSL_EXPORT SSL_SESSION *(*SSL_CTX_sess_get_get_cb(SSL_CTX *ctx))( SSL *ssl, uint8_t *id, int id_len, int *out_copy); /* SSL_magic_pending_session_ptr returns a magic |SSL_SESSION|* which indicates * that the session isn't currently unavailable. |SSL_get_error| will then * return |SSL_ERROR_PENDING_SESSION| and the handshake can be retried later * when the lookup has completed. */ OPENSSL_EXPORT SSL_SESSION *SSL_magic_pending_session_ptr(void); /* Session tickets. * * Session tickets, from RFC 5077, allow session resumption without server-side * state. Session tickets are supported in by default but may be disabled with * |SSL_OP_NO_TICKET|. * * On the client, ticket-based sessions use the same APIs as ID-based tickets. * Callers do not need to handle them differently. * * On the server, tickets are encrypted and authenticated with a secret key. By * default, an |SSL_CTX| generates a key on creation. Tickets are minted and * processed transparently. The following functions may be used to configure a * persistent key or implement more custom behavior. */ /* SSL_CTX_get_tlsext_ticket_keys writes |ctx|'s session ticket key material to * |len| bytes of |out|. It returns one on success and zero if |len| is not * 48. If |out| is NULL, it returns 48 instead. */ OPENSSL_EXPORT int SSL_CTX_get_tlsext_ticket_keys(SSL_CTX *ctx, void *out, size_t len); /* SSL_CTX_set_tlsext_ticket_keys sets |ctx|'s session ticket key material to * |len| bytes of |in|. It returns one on success and zero if |len| is not * 48. If |in| is NULL, it returns 48 instead. */ OPENSSL_EXPORT int SSL_CTX_set_tlsext_ticket_keys(SSL_CTX *ctx, const void *in, size_t len); /* SSL_TICKET_KEY_NAME_LEN is the length of the key name prefix of a session * ticket. */ #define SSL_TICKET_KEY_NAME_LEN 16 /* SSL_CTX_set_tlsext_ticket_key_cb sets the ticket callback to |callback| and * returns one. |callback| will be called when encrypting a new ticket and when * decrypting a ticket from the client. * * In both modes, |ctx| and |hmac_ctx| will already have been initialized with * |EVP_CIPHER_CTX_init| and |HMAC_CTX_init|, respectively. |callback| * configures |hmac_ctx| with an HMAC digest and key, and configures |ctx| * for encryption or decryption, based on the mode. * * When encrypting a new ticket, |encrypt| will be one. It writes a public * 16-byte key name to |key_name| and a fresh IV to |iv|. The output IV length * must match |EVP_CIPHER_CTX_iv_length| of the cipher selected. In this mode, * |callback| returns 1 on success and -1 on error. * * When decrypting a ticket, |encrypt| will be zero. |key_name| will point to a * 16-byte key name and |iv| points to an IV. The length of the IV consumed must * match |EVP_CIPHER_CTX_iv_length| of the cipher selected. In this mode, * |callback| returns -1 to abort the handshake, 0 if decrypting the ticket * failed, and 1 or 2 on success. If it returns 2, the ticket will be renewed. * This may be used to re-key the ticket. * * WARNING: |callback| wildly breaks the usual return value convention and is * called in two different modes. */ OPENSSL_EXPORT int SSL_CTX_set_tlsext_ticket_key_cb( SSL_CTX *ctx, int (*callback)(SSL *ssl, uint8_t *key_name, uint8_t *iv, EVP_CIPHER_CTX *ctx, HMAC_CTX *hmac_ctx, int encrypt)); /* Elliptic curve Diffie-Hellman. * * Cipher suites using an ECDHE key exchange perform Diffie-Hellman over an * elliptic curve negotiated by both endpoints. See RFC 4492. Only named curves * are supported. ECDHE is always enabled, but the curve preferences may be * configured with these functions. * * Note that TLS 1.3 renames these from curves to groups. For consistency, we * currently use the TLS 1.2 name in the API. */ /* SSL_CTX_set1_curves sets the preferred curves for |ctx| to be |curves|. Each * element of |curves| should be a curve nid. It returns one on success and * zero on failure. * * Note that this API uses nid values from nid.h and not the |SSL_CURVE_*| * values defined below. */ OPENSSL_EXPORT int SSL_CTX_set1_curves(SSL_CTX *ctx, const int *curves, size_t curves_len); /* SSL_set1_curves sets the preferred curves for |ssl| to be |curves|. Each * element of |curves| should be a curve nid. It returns one on success and * zero on failure. * * Note that this API uses nid values from nid.h and not the |SSL_CURVE_*| * values defined below. */ OPENSSL_EXPORT int SSL_set1_curves(SSL *ssl, const int *curves, size_t curves_len); /* SSL_CTX_set1_curves_list sets the preferred curves for |ctx| to be the * colon-separated list |curves|. Each element of |curves| should be a curve * name (e.g. P-256, X25519, ...). It returns one on success and zero on * failure. */ OPENSSL_EXPORT int SSL_CTX_set1_curves_list(SSL_CTX *ctx, const char *curves); /* SSL_set1_curves_list sets the preferred curves for |ssl| to be the * colon-separated list |curves|. Each element of |curves| should be a curve * name (e.g. P-256, X25519, ...). It returns one on success and zero on * failure. */ OPENSSL_EXPORT int SSL_set1_curves_list(SSL *ssl, const char *curves); /* SSL_CURVE_* define TLS curve IDs. */ #define SSL_CURVE_SECP256R1 23 #define SSL_CURVE_SECP384R1 24 #define SSL_CURVE_SECP521R1 25 #define SSL_CURVE_X25519 29 /* SSL_get_curve_id returns the ID of the curve used by |ssl|'s most recently * completed handshake or 0 if not applicable. * * TODO(davidben): This API currently does not work correctly if there is a * renegotiation in progress. Fix this. */ OPENSSL_EXPORT uint16_t SSL_get_curve_id(const SSL *ssl); /* SSL_get_curve_name returns a human-readable name for the curve specified by * the given TLS curve id, or NULL if the curve is unknown. */ OPENSSL_EXPORT const char *SSL_get_curve_name(uint16_t curve_id); /* Multiplicative Diffie-Hellman. * * Cipher suites using a DHE key exchange perform Diffie-Hellman over a * multiplicative group selected by the server. These ciphers are disabled for a * server unless a group is chosen with one of these functions. */ /* SSL_CTX_set_tmp_dh configures |ctx| to use the group from |dh| as the group * for DHE. Only the group is used, so |dh| needn't have a keypair. It returns * one on success and zero on error. */ OPENSSL_EXPORT int SSL_CTX_set_tmp_dh(SSL_CTX *ctx, const DH *dh); /* SSL_set_tmp_dh configures |ssl| to use the group from |dh| as the group for * DHE. Only the group is used, so |dh| needn't have a keypair. It returns one * on success and zero on error. */ OPENSSL_EXPORT int SSL_set_tmp_dh(SSL *ssl, const DH *dh); /* SSL_CTX_set_tmp_dh_callback configures |ctx| to use |callback| to determine * the group for DHE ciphers. |callback| should ignore |is_export| and * |keylength| and return a |DH| of the selected group or NULL on error. Only * the parameters are used, so the |DH| needn't have a generated keypair. * * WARNING: The caller does not take ownership of the resulting |DH|, so * |callback| must save and release the object elsewhere. */ OPENSSL_EXPORT void SSL_CTX_set_tmp_dh_callback( SSL_CTX *ctx, DH *(*callback)(SSL *ssl, int is_export, int keylength)); /* SSL_set_tmp_dh_callback configures |ssl| to use |callback| to determine the * group for DHE ciphers. |callback| should ignore |is_export| and |keylength| * and return a |DH| of the selected group or NULL on error. Only the * parameters are used, so the |DH| needn't have a generated keypair. * * WARNING: The caller does not take ownership of the resulting |DH|, so * |callback| must save and release the object elsewhere. */ OPENSSL_EXPORT void SSL_set_tmp_dh_callback(SSL *ssl, DH *(*dh)(SSL *ssl, int is_export, int keylength)); /* Certificate verification. * * SSL may authenticate either endpoint with an X.509 certificate. Typically * this is used to authenticate the server to the client. These functions * configure certificate verification. * * WARNING: By default, certificate verification errors on a client are not * fatal. See |SSL_VERIFY_NONE| This may be configured with * |SSL_CTX_set_verify|. * * By default clients are anonymous but a server may request a certificate from * the client by setting |SSL_VERIFY_PEER|. * * Many of these functions use OpenSSL's legacy X.509 stack which is * underdocumented and deprecated, but the replacement isn't ready yet. For * now, consumers may use the existing stack or bypass it by performing * certificate verification externally. This may be done with * |SSL_CTX_set_cert_verify_callback| or by extracting the chain with * |SSL_get_peer_cert_chain| after the handshake. In the future, functions will * be added to use the SSL stack without dependency on any part of the legacy * X.509 and ASN.1 stack. * * To augment certificate verification, a client may also enable OCSP stapling * (RFC 6066) and Certificate Transparency (RFC 6962) extensions. */ /* SSL_VERIFY_NONE, on a client, verifies the server certificate but does not * make errors fatal. The result may be checked with |SSL_get_verify_result|. On * a server it does not request a client certificate. This is the default. */ #define SSL_VERIFY_NONE 0x00 /* SSL_VERIFY_PEER, on a client, makes server certificate errors fatal. On a * server it requests a client certificate and makes errors fatal. However, * anonymous clients are still allowed. See * |SSL_VERIFY_FAIL_IF_NO_PEER_CERT|. */ #define SSL_VERIFY_PEER 0x01 /* SSL_VERIFY_FAIL_IF_NO_PEER_CERT configures a server to reject connections if * the client declines to send a certificate. Otherwise |SSL_VERIFY_PEER| still * allows anonymous clients. */ #define SSL_VERIFY_FAIL_IF_NO_PEER_CERT 0x02 /* SSL_VERIFY_PEER_IF_NO_OBC configures a server to request a client certificate * if and only if Channel ID is not negotiated. */ #define SSL_VERIFY_PEER_IF_NO_OBC 0x04 /* SSL_CTX_set_verify configures certificate verification behavior. |mode| is * one of the |SSL_VERIFY_*| values defined above. |callback|, if not NULL, is * used to customize certificate verification. See the behavior of * |X509_STORE_CTX_set_verify_cb|. * * The callback may use |SSL_get_ex_data_X509_STORE_CTX_idx| with * |X509_STORE_CTX_get_ex_data| to look up the |SSL| from |store_ctx|. */ OPENSSL_EXPORT void SSL_CTX_set_verify( SSL_CTX *ctx, int mode, int (*callback)(int ok, X509_STORE_CTX *store_ctx)); /* SSL_set_verify configures certificate verification behavior. |mode| is one of * the |SSL_VERIFY_*| values defined above. |callback|, if not NULL, is used to * customize certificate verification. See the behavior of * |X509_STORE_CTX_set_verify_cb|. * * The callback may use |SSL_get_ex_data_X509_STORE_CTX_idx| with * |X509_STORE_CTX_get_ex_data| to look up the |SSL| from |store_ctx|. */ OPENSSL_EXPORT void SSL_set_verify(SSL *ssl, int mode, int (*callback)(int ok, X509_STORE_CTX *store_ctx)); /* SSL_CTX_get_verify_mode returns |ctx|'s verify mode, set by * |SSL_CTX_set_verify|. */ OPENSSL_EXPORT int SSL_CTX_get_verify_mode(const SSL_CTX *ctx); /* SSL_get_verify_mode returns |ssl|'s verify mode, set by |SSL_CTX_set_verify| * or |SSL_set_verify|. */ OPENSSL_EXPORT int SSL_get_verify_mode(const SSL *ssl); /* SSL_CTX_get_verify_callback returns the callback set by * |SSL_CTX_set_verify|. */ OPENSSL_EXPORT int (*SSL_CTX_get_verify_callback(const SSL_CTX *ctx))( int ok, X509_STORE_CTX *store_ctx); /* SSL_get_verify_callback returns the callback set by |SSL_CTX_set_verify| or * |SSL_set_verify|. */ OPENSSL_EXPORT int (*SSL_get_verify_callback(const SSL *ssl))( int ok, X509_STORE_CTX *store_ctx); /* SSL_CTX_set_verify_depth sets the maximum depth of a certificate chain * accepted in verification. This number does not include the leaf, so a depth * of 1 allows the leaf and one CA certificate. */ OPENSSL_EXPORT void SSL_CTX_set_verify_depth(SSL_CTX *ctx, int depth); /* SSL_set_verify_depth sets the maximum depth of a certificate chain accepted * in verification. This number does not include the leaf, so a depth of 1 * allows the leaf and one CA certificate. */ OPENSSL_EXPORT void SSL_set_verify_depth(SSL *ssl, int depth); /* SSL_CTX_get_verify_depth returns the maximum depth of a certificate accepted * in verification. */ OPENSSL_EXPORT int SSL_CTX_get_verify_depth(const SSL_CTX *ctx); /* SSL_get_verify_depth returns the maximum depth of a certificate accepted in * verification. */ OPENSSL_EXPORT int SSL_get_verify_depth(const SSL *ssl); /* SSL_CTX_set1_param sets verification parameters from |param|. It returns one * on success and zero on failure. The caller retains ownership of |param|. */ OPENSSL_EXPORT int SSL_CTX_set1_param(SSL_CTX *ctx, const X509_VERIFY_PARAM *param); /* SSL_set1_param sets verification parameters from |param|. It returns one on * success and zero on failure. The caller retains ownership of |param|. */ OPENSSL_EXPORT int SSL_set1_param(SSL *ssl, const X509_VERIFY_PARAM *param); /* SSL_CTX_get0_param returns |ctx|'s |X509_VERIFY_PARAM| for certificate * verification. The caller must not release the returned pointer but may call * functions on it to configure it. */ OPENSSL_EXPORT X509_VERIFY_PARAM *SSL_CTX_get0_param(SSL_CTX *ctx); /* SSL_get0_param returns |ssl|'s |X509_VERIFY_PARAM| for certificate * verification. The caller must not release the returned pointer but may call * functions on it to configure it. */ OPENSSL_EXPORT X509_VERIFY_PARAM *SSL_get0_param(SSL *ssl); /* SSL_CTX_set_purpose sets |ctx|'s |X509_VERIFY_PARAM|'s 'purpose' parameter to * |purpose|. It returns one on success and zero on error. */ OPENSSL_EXPORT int SSL_CTX_set_purpose(SSL_CTX *ctx, int purpose); /* SSL_set_purpose sets |ssl|'s |X509_VERIFY_PARAM|'s 'purpose' parameter to * |purpose|. It returns one on success and zero on error. */ OPENSSL_EXPORT int SSL_set_purpose(SSL *ssl, int purpose); /* SSL_CTX_set_trust sets |ctx|'s |X509_VERIFY_PARAM|'s 'trust' parameter to * |trust|. It returns one on success and zero on error. */ OPENSSL_EXPORT int SSL_CTX_set_trust(SSL_CTX *ctx, int trust); /* SSL_set_trust sets |ssl|'s |X509_VERIFY_PARAM|'s 'trust' parameter to * |trust|. It returns one on success and zero on error. */ OPENSSL_EXPORT int SSL_set_trust(SSL *ssl, int trust); /* SSL_CTX_set_cert_store sets |ctx|'s certificate store to |store|. It takes * ownership of |store|. The store is used for certificate verification. * * The store is also used for the auto-chaining feature, but this is deprecated. * See also |SSL_MODE_NO_AUTO_CHAIN|. */ OPENSSL_EXPORT void SSL_CTX_set_cert_store(SSL_CTX *ctx, X509_STORE *store); /* SSL_CTX_get_cert_store returns |ctx|'s certificate store. */ OPENSSL_EXPORT X509_STORE *SSL_CTX_get_cert_store(const SSL_CTX *ctx); /* SSL_CTX_set_default_verify_paths loads the OpenSSL system-default trust * anchors into |ctx|'s store. It returns one on success and zero on failure. */ OPENSSL_EXPORT int SSL_CTX_set_default_verify_paths(SSL_CTX *ctx); /* SSL_CTX_load_verify_locations loads trust anchors into |ctx|'s store from * |ca_file| and |ca_dir|, either of which may be NULL. If |ca_file| is passed, * it is opened and PEM-encoded CA certificates are read. If |ca_dir| is passed, * it is treated as a directory in OpenSSL's hashed directory format. It returns * one on success and zero on failure. * * See * https://www.openssl.org/docs/manmaster/ssl/SSL_CTX_load_verify_locations.html * for documentation on the directory format. */ OPENSSL_EXPORT int SSL_CTX_load_verify_locations(SSL_CTX *ctx, const char *ca_file, const char *ca_dir); /* SSL_get_verify_result returns the result of certificate verification. It is * either |X509_V_OK| or a |X509_V_ERR_*| value. */ OPENSSL_EXPORT long SSL_get_verify_result(const SSL *ssl); /* SSL_get_ex_data_X509_STORE_CTX_idx returns the ex_data index used to look up * the |SSL| associated with an |X509_STORE_CTX| in the verify callback. */ OPENSSL_EXPORT int SSL_get_ex_data_X509_STORE_CTX_idx(void); /* SSL_CTX_set_cert_verify_callback sets a custom callback to be called on * certificate verification rather than |X509_verify_cert|. |store_ctx| contains * the verification parameters. The callback should return one on success and * zero on fatal error. It may use |X509_STORE_CTX_set_error| to set a * verification result. * * The callback may use |SSL_get_ex_data_X509_STORE_CTX_idx| to recover the * |SSL| object from |store_ctx|. */ OPENSSL_EXPORT void SSL_CTX_set_cert_verify_callback( SSL_CTX *ctx, int (*callback)(X509_STORE_CTX *store_ctx, void *arg), void *arg); /* SSL_enable_signed_cert_timestamps causes |ssl| (which must be the client end * of a connection) to request SCTs from the server. See * https://tools.ietf.org/html/rfc6962. * * Call |SSL_get0_signed_cert_timestamp_list| to recover the SCT after the * handshake. */ OPENSSL_EXPORT void SSL_enable_signed_cert_timestamps(SSL *ssl); /* SSL_CTX_enable_signed_cert_timestamps enables SCT requests on all client SSL * objects created from |ctx|. * * Call |SSL_get0_signed_cert_timestamp_list| to recover the SCT after the * handshake. */ OPENSSL_EXPORT void SSL_CTX_enable_signed_cert_timestamps(SSL_CTX *ctx); /* SSL_enable_ocsp_stapling causes |ssl| (which must be the client end of a * connection) to request a stapled OCSP response from the server. * * Call |SSL_get0_ocsp_response| to recover the OCSP response after the * handshake. */ OPENSSL_EXPORT void SSL_enable_ocsp_stapling(SSL *ssl); /* SSL_CTX_enable_ocsp_stapling enables OCSP stapling on all client SSL objects * created from |ctx|. * * Call |SSL_get0_ocsp_response| to recover the OCSP response after the * handshake. */ OPENSSL_EXPORT void SSL_CTX_enable_ocsp_stapling(SSL_CTX *ctx); /* SSL_CTX_set0_verify_cert_store sets an |X509_STORE| that will be used * exclusively for certificate verification and returns one. Ownership of * |store| is transferred to the |SSL_CTX|. */ OPENSSL_EXPORT int SSL_CTX_set0_verify_cert_store(SSL_CTX *ctx, X509_STORE *store); /* SSL_CTX_set1_verify_cert_store sets an |X509_STORE| that will be used * exclusively for certificate verification and returns one. An additional * reference to |store| will be taken. */ OPENSSL_EXPORT int SSL_CTX_set1_verify_cert_store(SSL_CTX *ctx, X509_STORE *store); /* SSL_set0_verify_cert_store sets an |X509_STORE| that will be used * exclusively for certificate verification and returns one. Ownership of * |store| is transferred to the |SSL|. */ OPENSSL_EXPORT int SSL_set0_verify_cert_store(SSL *ssl, X509_STORE *store); /* SSL_set1_verify_cert_store sets an |X509_STORE| that will be used * exclusively for certificate verification and returns one. An additional * reference to |store| will be taken. */ OPENSSL_EXPORT int SSL_set1_verify_cert_store(SSL *ssl, X509_STORE *store); /* Client certificate CA list. * * When requesting a client certificate, a server may advertise a list of * certificate authorities which are accepted. These functions may be used to * configure this list. */ /* SSL_set_client_CA_list sets |ssl|'s client certificate CA list to * |name_list|. It takes ownership of |name_list|. */ OPENSSL_EXPORT void SSL_set_client_CA_list(SSL *ssl, STACK_OF(X509_NAME) *name_list); /* SSL_CTX_set_client_CA_list sets |ctx|'s client certificate CA list to * |name_list|. It takes ownership of |name_list|. */ OPENSSL_EXPORT void SSL_CTX_set_client_CA_list(SSL_CTX *ctx, STACK_OF(X509_NAME) *name_list); /* SSL_get_client_CA_list returns |ssl|'s client certificate CA list. If |ssl| * has not been configured as a client, this is the list configured by * |SSL_CTX_set_client_CA_list|. * * If configured as a client, it returns the client certificate CA list sent by * the server. In this mode, the behavior is undefined except during the * callbacks set by |SSL_CTX_set_cert_cb| and |SSL_CTX_set_client_cert_cb| or * when the handshake is paused because of them. */ OPENSSL_EXPORT STACK_OF(X509_NAME) *SSL_get_client_CA_list(const SSL *ssl); /* SSL_CTX_get_client_CA_list returns |ctx|'s client certificate CA list. */ OPENSSL_EXPORT STACK_OF(X509_NAME) * SSL_CTX_get_client_CA_list(const SSL_CTX *ctx); /* SSL_add_client_CA appends |x509|'s subject to the client certificate CA list. * It returns one on success or zero on error. The caller retains ownership of * |x509|. */ OPENSSL_EXPORT int SSL_add_client_CA(SSL *ssl, X509 *x509); /* SSL_CTX_add_client_CA appends |x509|'s subject to the client certificate CA * list. It returns one on success or zero on error. The caller retains * ownership of |x509|. */ OPENSSL_EXPORT int SSL_CTX_add_client_CA(SSL_CTX *ctx, X509 *x509); /* SSL_load_client_CA_file opens |file| and reads PEM-encoded certificates from * it. It returns a newly-allocated stack of the certificate subjects or NULL * on error. */ OPENSSL_EXPORT STACK_OF(X509_NAME) *SSL_load_client_CA_file(const char *file); /* SSL_dup_CA_list makes a deep copy of |list|. It returns the new list on * success or NULL on allocation error. */ OPENSSL_EXPORT STACK_OF(X509_NAME) *SSL_dup_CA_list(STACK_OF(X509_NAME) *list); /* SSL_add_file_cert_subjects_to_stack behaves like |SSL_load_client_CA_file| * but appends the result to |out|. It returns one on success or zero on * error. */ OPENSSL_EXPORT int SSL_add_file_cert_subjects_to_stack(STACK_OF(X509_NAME) *out, const char *file); /* Server name indication. * * The server_name extension (RFC 3546) allows the client to advertise the name * of the server it is connecting to. This is used in virtual hosting * deployments to select one of a several certificates on a single IP. Only the * host_name name type is supported. */ #define TLSEXT_NAMETYPE_host_name 0 /* SSL_set_tlsext_host_name, for a client, configures |ssl| to advertise |name| * in the server_name extension. It returns one on success and zero on error. */ OPENSSL_EXPORT int SSL_set_tlsext_host_name(SSL *ssl, const char *name); /* SSL_get_servername, for a server, returns the hostname supplied by the * client or NULL if there was none. The |type| argument must be * |TLSEXT_NAMETYPE_host_name|. */ OPENSSL_EXPORT const char *SSL_get_servername(const SSL *ssl, const int type); /* SSL_get_servername_type, for a server, returns |TLSEXT_NAMETYPE_host_name| * if the client sent a hostname and -1 otherwise. */ OPENSSL_EXPORT int SSL_get_servername_type(const SSL *ssl); /* SSL_CTX_set_tlsext_servername_callback configures |callback| to be called on * the server after ClientHello extensions have been parsed and returns one. * The callback may use |SSL_get_servername| to examine the server_name * extension and returns a |SSL_TLSEXT_ERR_*| value. The value of |arg| may be * set by calling |SSL_CTX_set_tlsext_servername_arg|. * * If the callback returns |SSL_TLSEXT_ERR_NOACK|, the server_name extension is * not acknowledged in the ServerHello. If the return value is * |SSL_TLSEXT_ERR_ALERT_FATAL|, then |*out_alert| is the alert to send, * defaulting to |SSL_AD_UNRECOGNIZED_NAME|. |SSL_TLSEXT_ERR_ALERT_WARNING| is * ignored and treated as |SSL_TLSEXT_ERR_OK|. */ OPENSSL_EXPORT int SSL_CTX_set_tlsext_servername_callback( SSL_CTX *ctx, int (*callback)(SSL *ssl, int *out_alert, void *arg)); /* SSL_CTX_set_tlsext_servername_arg sets the argument to the servername * callback and returns one. See |SSL_CTX_set_tlsext_servername_callback|. */ OPENSSL_EXPORT int SSL_CTX_set_tlsext_servername_arg(SSL_CTX *ctx, void *arg); /* SSL_TLSEXT_ERR_* are values returned by some extension-related callbacks. */ #define SSL_TLSEXT_ERR_OK 0 #define SSL_TLSEXT_ERR_ALERT_WARNING 1 #define SSL_TLSEXT_ERR_ALERT_FATAL 2 #define SSL_TLSEXT_ERR_NOACK 3 /* Application-layer protocol negotiation. * * The ALPN extension (RFC 7301) allows negotiating different application-layer * protocols over a single port. This is used, for example, to negotiate * HTTP/2. */ /* SSL_CTX_set_alpn_protos sets the client ALPN protocol list on |ctx| to * |protos|. |protos| must be in wire-format (i.e. a series of non-empty, 8-bit * length-prefixed strings). It returns zero on success and one on failure. * Configuring this list enables ALPN on a client. * * WARNING: this function is dangerous because it breaks the usual return value * convention. */ OPENSSL_EXPORT int SSL_CTX_set_alpn_protos(SSL_CTX *ctx, const uint8_t *protos, unsigned protos_len); /* SSL_set_alpn_protos sets the client ALPN protocol list on |ssl| to |protos|. * |protos| must be in wire-format (i.e. a series of non-empty, 8-bit * length-prefixed strings). It returns zero on success and one on failure. * Configuring this list enables ALPN on a client. * * WARNING: this function is dangerous because it breaks the usual return value * convention. */ OPENSSL_EXPORT int SSL_set_alpn_protos(SSL *ssl, const uint8_t *protos, unsigned protos_len); /* SSL_CTX_set_alpn_select_cb sets a callback function on |ctx| that is called * during ClientHello processing in order to select an ALPN protocol from the * client's list of offered protocols. Configuring this callback enables ALPN on * a server. * * The callback is passed a wire-format (i.e. a series of non-empty, 8-bit * length-prefixed strings) ALPN protocol list in |in|. It should set |*out| and * |*out_len| to the selected protocol and return |SSL_TLSEXT_ERR_OK| on * success. It does not pass ownership of the buffer. Otherwise, it should * return |SSL_TLSEXT_ERR_NOACK|. Other |SSL_TLSEXT_ERR_*| values are * unimplemented and will be treated as |SSL_TLSEXT_ERR_NOACK|. * * The cipher suite is selected before negotiating ALPN. The callback may use * |SSL_get_pending_cipher| to query the cipher suite. */ OPENSSL_EXPORT void SSL_CTX_set_alpn_select_cb( SSL_CTX *ctx, int (*cb)(SSL *ssl, const uint8_t **out, uint8_t *out_len, const uint8_t *in, unsigned in_len, void *arg), void *arg); /* SSL_get0_alpn_selected gets the selected ALPN protocol (if any) from |ssl|. * On return it sets |*out_data| to point to |*out_len| bytes of protocol name * (not including the leading length-prefix byte). If the server didn't respond * with a negotiated protocol then |*out_len| will be zero. */ OPENSSL_EXPORT void SSL_get0_alpn_selected(const SSL *ssl, const uint8_t **out_data, unsigned *out_len); /* Next protocol negotiation. * * The NPN extension (draft-agl-tls-nextprotoneg-03) is the predecessor to ALPN * and deprecated in favor of it. */ /* SSL_CTX_set_next_protos_advertised_cb sets a callback that is called when a * TLS server needs a list of supported protocols for Next Protocol * Negotiation. The returned list must be in wire format. The list is returned * by setting |*out| to point to it and |*out_len| to its length. This memory * will not be modified, but one should assume that |ssl| keeps a reference to * it. * * The callback should return |SSL_TLSEXT_ERR_OK| if it wishes to advertise. * Otherwise, no such extension will be included in the ServerHello. */ OPENSSL_EXPORT void SSL_CTX_set_next_protos_advertised_cb( SSL_CTX *ctx, int (*cb)(SSL *ssl, const uint8_t **out, unsigned *out_len, void *arg), void *arg); /* SSL_CTX_set_next_proto_select_cb sets a callback that is called when a client * needs to select a protocol from the server's provided list. |*out| must be * set to point to the selected protocol (which may be within |in|). The length * of the protocol name must be written into |*out_len|. The server's advertised * protocols are provided in |in| and |in_len|. The callback can assume that * |in| is syntactically valid. * * The client must select a protocol. It is fatal to the connection if this * callback returns a value other than |SSL_TLSEXT_ERR_OK|. * * Configuring this callback enables NPN on a client. */ OPENSSL_EXPORT void SSL_CTX_set_next_proto_select_cb( SSL_CTX *ctx, int (*cb)(SSL *ssl, uint8_t **out, uint8_t *out_len, const uint8_t *in, unsigned in_len, void *arg), void *arg); /* SSL_get0_next_proto_negotiated sets |*out_data| and |*out_len| to point to * the client's requested protocol for this connection. If the client didn't * request any protocol, then |*out_data| is set to NULL. * * Note that the client can request any protocol it chooses. The value returned * from this function need not be a member of the list of supported protocols * provided by the server. */ OPENSSL_EXPORT void SSL_get0_next_proto_negotiated(const SSL *ssl, const uint8_t **out_data, unsigned *out_len); /* SSL_select_next_proto implements the standard protocol selection. It is * expected that this function is called from the callback set by * |SSL_CTX_set_next_proto_select_cb|. * * The protocol data is assumed to be a vector of 8-bit, length prefixed byte * strings. The length byte itself is not included in the length. A byte * string of length 0 is invalid. No byte string may be truncated. * * The current, but experimental algorithm for selecting the protocol is: * * 1) If the server doesn't support NPN then this is indicated to the * callback. In this case, the client application has to abort the connection * or have a default application level protocol. * * 2) If the server supports NPN, but advertises an empty list then the * client selects the first protocol in its list, but indicates via the * API that this fallback case was enacted. * * 3) Otherwise, the client finds the first protocol in the server's list * that it supports and selects this protocol. This is because it's * assumed that the server has better information about which protocol * a client should use. * * 4) If the client doesn't support any of the server's advertised * protocols, then this is treated the same as case 2. * * It returns either |OPENSSL_NPN_NEGOTIATED| if a common protocol was found, or * |OPENSSL_NPN_NO_OVERLAP| if the fallback case was reached. */ OPENSSL_EXPORT int SSL_select_next_proto(uint8_t **out, uint8_t *out_len, const uint8_t *server, unsigned server_len, const uint8_t *client, unsigned client_len); #define OPENSSL_NPN_UNSUPPORTED 0 #define OPENSSL_NPN_NEGOTIATED 1 #define OPENSSL_NPN_NO_OVERLAP 2 /* Channel ID. * * See draft-balfanz-tls-channelid-01. */ /* SSL_CTX_set_tls_channel_id_enabled configures whether connections associated * with |ctx| should enable Channel ID. */ OPENSSL_EXPORT void SSL_CTX_set_tls_channel_id_enabled(SSL_CTX *ctx, int enabled); /* SSL_set_tls_channel_id_enabled configures whether |ssl| should enable Channel * ID. */ OPENSSL_EXPORT void SSL_set_tls_channel_id_enabled(SSL *ssl, int enabled); /* SSL_CTX_set1_tls_channel_id configures a TLS client to send a TLS Channel ID * to compatible servers. |private_key| must be a P-256 EC key. It returns one * on success and zero on error. */ OPENSSL_EXPORT int SSL_CTX_set1_tls_channel_id(SSL_CTX *ctx, EVP_PKEY *private_key); /* SSL_set1_tls_channel_id configures a TLS client to send a TLS Channel ID to * compatible servers. |private_key| must be a P-256 EC key. It returns one on * success and zero on error. */ OPENSSL_EXPORT int SSL_set1_tls_channel_id(SSL *ssl, EVP_PKEY *private_key); /* SSL_get_tls_channel_id gets the client's TLS Channel ID from a server |SSL*| * and copies up to the first |max_out| bytes into |out|. The Channel ID * consists of the client's P-256 public key as an (x,y) pair where each is a * 32-byte, big-endian field element. It returns 0 if the client didn't offer a * Channel ID and the length of the complete Channel ID otherwise. */ OPENSSL_EXPORT size_t SSL_get_tls_channel_id(SSL *ssl, uint8_t *out, size_t max_out); /* SSL_CTX_set_channel_id_cb sets a callback to be called when a TLS Channel ID * is requested. The callback may set |*out_pkey| to a key, passing a reference * to the caller. If none is returned, the handshake will pause and * |SSL_get_error| will return |SSL_ERROR_WANT_CHANNEL_ID_LOOKUP|. * * See also |SSL_ERROR_WANT_CHANNEL_ID_LOOKUP|. */ OPENSSL_EXPORT void SSL_CTX_set_channel_id_cb( SSL_CTX *ctx, void (*channel_id_cb)(SSL *ssl, EVP_PKEY **out_pkey)); /* SSL_CTX_get_channel_id_cb returns the callback set by * |SSL_CTX_set_channel_id_cb|. */ OPENSSL_EXPORT void (*SSL_CTX_get_channel_id_cb(SSL_CTX *ctx))( SSL *ssl, EVP_PKEY **out_pkey); /* DTLS-SRTP. * * See RFC 5764. */ /* srtp_protection_profile_st (aka |SRTP_PROTECTION_PROFILE|) is an SRTP * profile for use with the use_srtp extension. */ struct srtp_protection_profile_st { const char *name; unsigned long id; } /* SRTP_PROTECTION_PROFILE */; DECLARE_STACK_OF(SRTP_PROTECTION_PROFILE) /* SRTP_* define constants for SRTP profiles. */ #define SRTP_AES128_CM_SHA1_80 0x0001 #define SRTP_AES128_CM_SHA1_32 0x0002 #define SRTP_AES128_F8_SHA1_80 0x0003 #define SRTP_AES128_F8_SHA1_32 0x0004 #define SRTP_NULL_SHA1_80 0x0005 #define SRTP_NULL_SHA1_32 0x0006 #define SRTP_AEAD_AES_128_GCM 0x0007 #define SRTP_AEAD_AES_256_GCM 0x0008 /* SSL_CTX_set_srtp_profiles enables SRTP for all SSL objects created from * |ctx|. |profile| contains a colon-separated list of profile names. It returns * one on success and zero on failure. */ OPENSSL_EXPORT int SSL_CTX_set_srtp_profiles(SSL_CTX *ctx, const char *profiles); /* SSL_set_srtp_profiles enables SRTP for |ssl|. |profile| contains a * colon-separated list of profile names. It returns one on success and zero on * failure. */ OPENSSL_EXPORT int SSL_set_srtp_profiles(SSL *ssl, const char *profiles); /* SSL_get_srtp_profiles returns the SRTP profiles supported by |ssl|. */ OPENSSL_EXPORT STACK_OF(SRTP_PROTECTION_PROFILE) *SSL_get_srtp_profiles( SSL *ssl); /* SSL_get_selected_srtp_profile returns the selected SRTP profile, or NULL if * SRTP was not negotiated. */ OPENSSL_EXPORT const SRTP_PROTECTION_PROFILE *SSL_get_selected_srtp_profile( SSL *ssl); /* Pre-shared keys. * * Connections may be configured with PSK (Pre-Shared Key) cipher suites. These * authenticate using out-of-band pre-shared keys rather than certificates. See * RFC 4279. * * This implementation uses NUL-terminated C strings for identities and identity * hints, so values with a NUL character are not supported. (RFC 4279 does not * specify the format of an identity.) */ /* PSK_MAX_IDENTITY_LEN is the maximum supported length of a PSK identity, * excluding the NUL terminator. */ #define PSK_MAX_IDENTITY_LEN 128 /* PSK_MAX_PSK_LEN is the maximum supported length of a pre-shared key. */ #define PSK_MAX_PSK_LEN 256 /* SSL_CTX_set_psk_client_callback sets the callback to be called when PSK is * negotiated on the client. This callback must be set to enable PSK cipher * suites on the client. * * The callback is passed the identity hint in |hint| or NULL if none was * provided. It should select a PSK identity and write the identity and the * corresponding PSK to |identity| and |psk|, respectively. The identity is * written as a NUL-terminated C string of length (excluding the NUL terminator) * at most |max_identity_len|. The PSK's length must be at most |max_psk_len|. * The callback returns the length of the PSK or 0 if no suitable identity was * found. */ OPENSSL_EXPORT void SSL_CTX_set_psk_client_callback( SSL_CTX *ctx, unsigned (*psk_client_callback)( SSL *ssl, const char *hint, char *identity, unsigned max_identity_len, uint8_t *psk, unsigned max_psk_len)); /* SSL_set_psk_client_callback sets the callback to be called when PSK is * negotiated on the client. This callback must be set to enable PSK cipher * suites on the client. See also |SSL_CTX_set_psk_client_callback|. */ OPENSSL_EXPORT void SSL_set_psk_client_callback( SSL *ssl, unsigned (*psk_client_callback)(SSL *ssl, const char *hint, char *identity, unsigned max_identity_len, uint8_t *psk, unsigned max_psk_len)); /* SSL_CTX_set_psk_server_callback sets the callback to be called when PSK is * negotiated on the server. This callback must be set to enable PSK cipher * suites on the server. * * The callback is passed the identity in |identity|. It should write a PSK of * length at most |max_psk_len| to |psk| and return the number of bytes written * or zero if the PSK identity is unknown. */ OPENSSL_EXPORT void SSL_CTX_set_psk_server_callback( SSL_CTX *ctx, unsigned (*psk_server_callback)(SSL *ssl, const char *identity, uint8_t *psk, unsigned max_psk_len)); /* SSL_set_psk_server_callback sets the callback to be called when PSK is * negotiated on the server. This callback must be set to enable PSK cipher * suites on the server. See also |SSL_CTX_set_psk_server_callback|. */ OPENSSL_EXPORT void SSL_set_psk_server_callback( SSL *ssl, unsigned (*psk_server_callback)(SSL *ssl, const char *identity, uint8_t *psk, unsigned max_psk_len)); /* SSL_CTX_use_psk_identity_hint configures server connections to advertise an * identity hint of |identity_hint|. It returns one on success and zero on * error. */ OPENSSL_EXPORT int SSL_CTX_use_psk_identity_hint(SSL_CTX *ctx, const char *identity_hint); /* SSL_use_psk_identity_hint configures server connections to advertise an * identity hint of |identity_hint|. It returns one on success and zero on * error. */ OPENSSL_EXPORT int SSL_use_psk_identity_hint(SSL *ssl, const char *identity_hint); /* SSL_get_psk_identity_hint returns the PSK identity hint advertised for |ssl| * or NULL if there is none. */ OPENSSL_EXPORT const char *SSL_get_psk_identity_hint(const SSL *ssl); /* SSL_get_psk_identity, after the handshake completes, returns the PSK identity * that was negotiated by |ssl| or NULL if PSK was not used. */ OPENSSL_EXPORT const char *SSL_get_psk_identity(const SSL *ssl); /* Alerts. * * TLS and SSL 3.0 use alerts to signal error conditions. Alerts have a type * (warning or fatal) and description. OpenSSL internally handles fatal alerts * with dedicated error codes (see |SSL_AD_REASON_OFFSET|). Except for * close_notify, warning alerts are silently ignored and may only be surfaced * with |SSL_CTX_set_info_callback|. */ /* SSL_AD_REASON_OFFSET is the offset between error reasons and |SSL_AD_*| * values. Any error code under |ERR_LIB_SSL| with an error reason above this * value corresponds to an alert description. Consumers may add or subtract * |SSL_AD_REASON_OFFSET| to convert between them. * * make_errors.go reserves error codes above 1000 for manually-assigned errors. * This value must be kept in sync with reservedReasonCode in make_errors.h */ #define SSL_AD_REASON_OFFSET 1000 /* SSL_AD_* are alert descriptions for SSL 3.0 and TLS. */ #define SSL_AD_CLOSE_NOTIFY SSL3_AD_CLOSE_NOTIFY #define SSL_AD_UNEXPECTED_MESSAGE SSL3_AD_UNEXPECTED_MESSAGE #define SSL_AD_BAD_RECORD_MAC SSL3_AD_BAD_RECORD_MAC #define SSL_AD_DECRYPTION_FAILED TLS1_AD_DECRYPTION_FAILED #define SSL_AD_RECORD_OVERFLOW TLS1_AD_RECORD_OVERFLOW #define SSL_AD_DECOMPRESSION_FAILURE SSL3_AD_DECOMPRESSION_FAILURE #define SSL_AD_HANDSHAKE_FAILURE SSL3_AD_HANDSHAKE_FAILURE #define SSL_AD_NO_CERTIFICATE SSL3_AD_NO_CERTIFICATE /* Not used in TLS */ #define SSL_AD_BAD_CERTIFICATE SSL3_AD_BAD_CERTIFICATE #define SSL_AD_UNSUPPORTED_CERTIFICATE SSL3_AD_UNSUPPORTED_CERTIFICATE #define SSL_AD_CERTIFICATE_REVOKED SSL3_AD_CERTIFICATE_REVOKED #define SSL_AD_CERTIFICATE_EXPIRED SSL3_AD_CERTIFICATE_EXPIRED #define SSL_AD_CERTIFICATE_UNKNOWN SSL3_AD_CERTIFICATE_UNKNOWN #define SSL_AD_ILLEGAL_PARAMETER SSL3_AD_ILLEGAL_PARAMETER #define SSL_AD_UNKNOWN_CA TLS1_AD_UNKNOWN_CA #define SSL_AD_ACCESS_DENIED TLS1_AD_ACCESS_DENIED #define SSL_AD_DECODE_ERROR TLS1_AD_DECODE_ERROR #define SSL_AD_DECRYPT_ERROR TLS1_AD_DECRYPT_ERROR #define SSL_AD_EXPORT_RESTRICTION TLS1_AD_EXPORT_RESTRICTION #define SSL_AD_PROTOCOL_VERSION TLS1_AD_PROTOCOL_VERSION #define SSL_AD_INSUFFICIENT_SECURITY TLS1_AD_INSUFFICIENT_SECURITY #define SSL_AD_INTERNAL_ERROR TLS1_AD_INTERNAL_ERROR #define SSL_AD_INAPPROPRIATE_FALLBACK SSL3_AD_INAPPROPRIATE_FALLBACK #define SSL_AD_USER_CANCELLED TLS1_AD_USER_CANCELLED #define SSL_AD_NO_RENEGOTIATION TLS1_AD_NO_RENEGOTIATION #define SSL_AD_MISSING_EXTENSION TLS1_AD_MISSING_EXTENSION #define SSL_AD_UNSUPPORTED_EXTENSION TLS1_AD_UNSUPPORTED_EXTENSION #define SSL_AD_CERTIFICATE_UNOBTAINABLE TLS1_AD_CERTIFICATE_UNOBTAINABLE #define SSL_AD_UNRECOGNIZED_NAME TLS1_AD_UNRECOGNIZED_NAME #define SSL_AD_BAD_CERTIFICATE_STATUS_RESPONSE \ TLS1_AD_BAD_CERTIFICATE_STATUS_RESPONSE #define SSL_AD_BAD_CERTIFICATE_HASH_VALUE TLS1_AD_BAD_CERTIFICATE_HASH_VALUE #define SSL_AD_UNKNOWN_PSK_IDENTITY TLS1_AD_UNKNOWN_PSK_IDENTITY #define SSL_AD_CERTIFICATE_REQUIRED TLS1_AD_CERTIFICATE_REQUIRED /* SSL_alert_type_string_long returns a string description of |value| as an * alert type (warning or fatal). */ OPENSSL_EXPORT const char *SSL_alert_type_string_long(int value); /* SSL_alert_desc_string_long returns a string description of |value| as an * alert description or "unknown" if unknown. */ OPENSSL_EXPORT const char *SSL_alert_desc_string_long(int value); /* SSL_send_fatal_alert sends a fatal alert over |ssl| of the specified type, * which should be one of the |SSL_AD_*| constants. It returns one on success * and <= 0 on error. The caller should pass the return value into * |SSL_get_error| to determine how to proceed. Once this function has been * called, future calls to |SSL_write| will fail. * * If retrying a failed operation due to |SSL_ERROR_WANT_WRITE|, subsequent * calls must use the same |alert| parameter. */ OPENSSL_EXPORT int SSL_send_fatal_alert(SSL *ssl, uint8_t alert); /* ex_data functions. * * See |ex_data.h| for details. */ OPENSSL_EXPORT int SSL_set_ex_data(SSL *ssl, int idx, void *data); OPENSSL_EXPORT void *SSL_get_ex_data(const SSL *ssl, int idx); OPENSSL_EXPORT int SSL_get_ex_new_index(long argl, void *argp, CRYPTO_EX_unused *unused, CRYPTO_EX_dup *dup_func, CRYPTO_EX_free *free_func); OPENSSL_EXPORT int SSL_SESSION_set_ex_data(SSL_SESSION *session, int idx, void *data); OPENSSL_EXPORT void *SSL_SESSION_get_ex_data(const SSL_SESSION *session, int idx); OPENSSL_EXPORT int SSL_SESSION_get_ex_new_index(long argl, void *argp, CRYPTO_EX_unused *unused, CRYPTO_EX_dup *dup_func, CRYPTO_EX_free *free_func); OPENSSL_EXPORT int SSL_CTX_set_ex_data(SSL_CTX *ctx, int idx, void *data); OPENSSL_EXPORT void *SSL_CTX_get_ex_data(const SSL_CTX *ctx, int idx); OPENSSL_EXPORT int SSL_CTX_get_ex_new_index(long argl, void *argp, CRYPTO_EX_unused *unused, CRYPTO_EX_dup *dup_func, CRYPTO_EX_free *free_func); /* Low-level record-layer state. */ /* SSL_get_ivs sets |*out_iv_len| to the length of the IVs for the ciphers * underlying |ssl| and sets |*out_read_iv| and |*out_write_iv| to point to the * current IVs for the read and write directions. This is only meaningful for * connections with implicit IVs (i.e. CBC mode with SSLv3 or TLS 1.0). * * It returns one on success or zero on error. */ OPENSSL_EXPORT int SSL_get_ivs(const SSL *ssl, const uint8_t **out_read_iv, const uint8_t **out_write_iv, size_t *out_iv_len); /* SSL_get_key_block_len returns the length of |ssl|'s key block. */ OPENSSL_EXPORT size_t SSL_get_key_block_len(const SSL *ssl); /* SSL_generate_key_block generates |out_len| bytes of key material for |ssl|'s * current connection state. */ OPENSSL_EXPORT int SSL_generate_key_block(const SSL *ssl, uint8_t *out, size_t out_len); /* SSL_get_read_sequence returns, in TLS, the expected sequence number of the * next incoming record in the current epoch. In DTLS, it returns the maximum * sequence number received in the current epoch and includes the epoch number * in the two most significant bytes. */ OPENSSL_EXPORT uint64_t SSL_get_read_sequence(const SSL *ssl); /* SSL_get_write_sequence returns the sequence number of the next outgoing * record in the current epoch. In DTLS, it includes the epoch number in the * two most significant bytes. */ OPENSSL_EXPORT uint64_t SSL_get_write_sequence(const SSL *ssl); /* Obscure functions. */ /* SSL_get_structure_sizes returns the sizes of the SSL, SSL_CTX and * SSL_SESSION structures so that a test can ensure that outside code agrees on * these values. */ OPENSSL_EXPORT void SSL_get_structure_sizes(size_t *ssl_size, size_t *ssl_ctx_size, size_t *ssl_session_size); /* SSL_CTX_set_msg_callback installs |cb| as the message callback for |ctx|. * This callback will be called when sending or receiving low-level record * headers, complete handshake messages, ChangeCipherSpec, and alerts. * |write_p| is one for outgoing messages and zero for incoming messages. * * For each record header, |cb| is called with |version| = 0 and |content_type| * = |SSL3_RT_HEADER|. The |len| bytes from |buf| contain the header. Note that * this does not include the record body. If the record is sealed, the length * in the header is the length of the ciphertext. * * For each handshake message, ChangeCipherSpec, and alert, |version| is the * protocol version and |content_type| is the corresponding record type. The * |len| bytes from |buf| contain the handshake message, one-byte * ChangeCipherSpec body, and two-byte alert, respectively. * * For a V2ClientHello, |version| is |SSL2_VERSION|, |content_type| is zero, and * the |len| bytes from |buf| contain the V2ClientHello structure. */ OPENSSL_EXPORT void SSL_CTX_set_msg_callback( SSL_CTX *ctx, void (*cb)(int write_p, int version, int content_type, const void *buf, size_t len, SSL *ssl, void *arg)); /* SSL_CTX_set_msg_callback_arg sets the |arg| parameter of the message * callback. */ OPENSSL_EXPORT void SSL_CTX_set_msg_callback_arg(SSL_CTX *ctx, void *arg); /* SSL_set_msg_callback installs |cb| as the message callback of |ssl|. See * |SSL_CTX_set_msg_callback| for when this callback is called. */ OPENSSL_EXPORT void SSL_set_msg_callback( SSL *ssl, void (*cb)(int write_p, int version, int content_type, const void *buf, size_t len, SSL *ssl, void *arg)); /* SSL_set_msg_callback_arg sets the |arg| parameter of the message callback. */ OPENSSL_EXPORT void SSL_set_msg_callback_arg(SSL *ssl, void *arg); /* SSL_CTX_set_keylog_callback configures a callback to log key material. This * is intended for debugging use with tools like Wireshark. The |cb| function * should log |line| followed by a newline, synchronizing with any concurrent * access to the log. * * The format is described in * https://developer.mozilla.org/en-US/docs/Mozilla/Projects/NSS/Key_Log_Format. */ OPENSSL_EXPORT void SSL_CTX_set_keylog_callback( SSL_CTX *ctx, void (*cb)(const SSL *ssl, const char *line)); /* SSL_CTX_get_keylog_callback returns the callback configured by * |SSL_CTX_set_keylog_callback|. */ OPENSSL_EXPORT void (*SSL_CTX_get_keylog_callback(const SSL_CTX *ctx))( const SSL *ssl, const char *line); /* SSL_CTX_set_current_time_cb configures a callback to retrieve the current * time, which should be set in |*out_clock|. This can be used for testing * purposes; for example, a callback can be configured that returns a time * set explicitly by the test. */ OPENSSL_EXPORT void SSL_CTX_set_current_time_cb( SSL_CTX *ctx, void (*cb)(const SSL *ssl, struct timeval *out_clock)); enum ssl_renegotiate_mode_t { ssl_renegotiate_never = 0, ssl_renegotiate_once, ssl_renegotiate_freely, ssl_renegotiate_ignore, }; /* SSL_set_renegotiate_mode configures how |ssl|, a client, reacts to * renegotiation attempts by a server. If |ssl| is a server, peer-initiated * renegotiations are *always* rejected and this function does nothing. * * The renegotiation mode defaults to |ssl_renegotiate_never|, but may be set * at any point in a connection's lifetime. Set it to |ssl_renegotiate_once| to * allow one renegotiation, |ssl_renegotiate_freely| to allow all * renegotiations or |ssl_renegotiate_ignore| to ignore HelloRequest messages. * Note that ignoring HelloRequest messages may cause the connection to stall * if the server waits for the renegotiation to complete. * * There is no support in BoringSSL for initiating renegotiations as a client * or server. */ OPENSSL_EXPORT void SSL_set_renegotiate_mode(SSL *ssl, enum ssl_renegotiate_mode_t mode); /* SSL_renegotiate_pending returns one if |ssl| is in the middle of a * renegotiation. */ OPENSSL_EXPORT int SSL_renegotiate_pending(SSL *ssl); /* SSL_total_renegotiations returns the total number of renegotiation handshakes * performed by |ssl|. This includes the pending renegotiation, if any. */ OPENSSL_EXPORT int SSL_total_renegotiations(const SSL *ssl); /* SSL_CTX_set_early_data_enabled sets whether early data is allowed to be used * with resumptions using |ctx|. WARNING: This is experimental and may cause * interoperability failures until fully implemented. */ OPENSSL_EXPORT void SSL_CTX_set_early_data_enabled(SSL_CTX *ctx, int enabled); /* SSL_MAX_CERT_LIST_DEFAULT is the default maximum length, in bytes, of a peer * certificate chain. */ #define SSL_MAX_CERT_LIST_DEFAULT (1024 * 100) /* SSL_CTX_get_max_cert_list returns the maximum length, in bytes, of a peer * certificate chain accepted by |ctx|. */ OPENSSL_EXPORT size_t SSL_CTX_get_max_cert_list(const SSL_CTX *ctx); /* SSL_CTX_set_max_cert_list sets the maximum length, in bytes, of a peer * certificate chain to |max_cert_list|. This affects how much memory may be * consumed during the handshake. */ OPENSSL_EXPORT void SSL_CTX_set_max_cert_list(SSL_CTX *ctx, size_t max_cert_list); /* SSL_get_max_cert_list returns the maximum length, in bytes, of a peer * certificate chain accepted by |ssl|. */ OPENSSL_EXPORT size_t SSL_get_max_cert_list(const SSL *ssl); /* SSL_set_max_cert_list sets the maximum length, in bytes, of a peer * certificate chain to |max_cert_list|. This affects how much memory may be * consumed during the handshake. */ OPENSSL_EXPORT void SSL_set_max_cert_list(SSL *ssl, size_t max_cert_list); /* SSL_CTX_set_max_send_fragment sets the maximum length, in bytes, of records * sent by |ctx|. Beyond this length, handshake messages and application data * will be split into multiple records. It returns one on success or zero on * error. */ OPENSSL_EXPORT int SSL_CTX_set_max_send_fragment(SSL_CTX *ctx, size_t max_send_fragment); /* SSL_set_max_send_fragment sets the maximum length, in bytes, of records sent * by |ssl|. Beyond this length, handshake messages and application data will * be split into multiple records. It returns one on success or zero on * error. */ OPENSSL_EXPORT int SSL_set_max_send_fragment(SSL *ssl, size_t max_send_fragment); /* SSL_get_v2clienthello_count returns the total number of V2ClientHellos that * are accepted. */ OPENSSL_EXPORT uint64_t SSL_get_v2clienthello_count(void); /* ssl_early_callback_ctx (aka |SSL_CLIENT_HELLO|) is passed to certain * callbacks that are called very early on during the server handshake. At this * point, much of the SSL* hasn't been filled out and only the ClientHello can * be depended on. */ typedef struct ssl_early_callback_ctx { SSL *ssl; const uint8_t *client_hello; size_t client_hello_len; uint16_t version; const uint8_t *random; size_t random_len; const uint8_t *session_id; size_t session_id_len; const uint8_t *cipher_suites; size_t cipher_suites_len; const uint8_t *compression_methods; size_t compression_methods_len; const uint8_t *extensions; size_t extensions_len; } SSL_CLIENT_HELLO; /* SSL_early_callback_ctx_extension_get searches the extensions in * |client_hello| for an extension of the given type. If not found, it returns * zero. Otherwise it sets |out_data| to point to the extension contents (not * including the type and length bytes), sets |out_len| to the length of the * extension contents and returns one. */ OPENSSL_EXPORT int SSL_early_callback_ctx_extension_get( const SSL_CLIENT_HELLO *client_hello, uint16_t extension_type, const uint8_t **out_data, size_t *out_len); /* SSL_CTX_set_select_certificate_cb sets a callback that is called before most * ClientHello processing and before the decision whether to resume a session * is made. The callback may inspect the ClientHello and configure the * connection. It may then return one to continue the handshake or zero to * pause the handshake to perform an asynchronous operation. If paused, * |SSL_get_error| will return |SSL_ERROR_PENDING_CERTIFICATE|. * * Note: The |SSL_CLIENT_HELLO| is only valid for the duration of the callback * and is not valid while the handshake is paused. */ OPENSSL_EXPORT void SSL_CTX_set_select_certificate_cb( SSL_CTX *ctx, int (*cb)(const SSL_CLIENT_HELLO *)); /* SSL_CTX_set_dos_protection_cb sets a callback that is called once the * resumption decision for a ClientHello has been made. It can return one to * allow the handshake to continue or zero to cause the handshake to abort. */ OPENSSL_EXPORT void SSL_CTX_set_dos_protection_cb( SSL_CTX *ctx, int (*cb)(const SSL_CLIENT_HELLO *)); /* SSL_ST_* are possible values for |SSL_state| and the bitmasks that make them * up. */ #define SSL_ST_CONNECT 0x1000 #define SSL_ST_ACCEPT 0x2000 #define SSL_ST_MASK 0x0FFF #define SSL_ST_INIT (SSL_ST_CONNECT | SSL_ST_ACCEPT) #define SSL_ST_OK 0x03 #define SSL_ST_RENEGOTIATE (0x04 | SSL_ST_INIT) #define SSL_ST_TLS13 (0x05 | SSL_ST_INIT) /* SSL_CB_* are possible values for the |type| parameter in the info * callback and the bitmasks that make them up. */ #define SSL_CB_LOOP 0x01 #define SSL_CB_EXIT 0x02 #define SSL_CB_READ 0x04 #define SSL_CB_WRITE 0x08 #define SSL_CB_ALERT 0x4000 #define SSL_CB_READ_ALERT (SSL_CB_ALERT | SSL_CB_READ) #define SSL_CB_WRITE_ALERT (SSL_CB_ALERT | SSL_CB_WRITE) #define SSL_CB_ACCEPT_LOOP (SSL_ST_ACCEPT | SSL_CB_LOOP) #define SSL_CB_ACCEPT_EXIT (SSL_ST_ACCEPT | SSL_CB_EXIT) #define SSL_CB_CONNECT_LOOP (SSL_ST_CONNECT | SSL_CB_LOOP) #define SSL_CB_CONNECT_EXIT (SSL_ST_CONNECT | SSL_CB_EXIT) #define SSL_CB_HANDSHAKE_START 0x10 #define SSL_CB_HANDSHAKE_DONE 0x20 /* SSL_CTX_set_info_callback configures a callback to be run when various * events occur during a connection's lifetime. The |type| argument determines * the type of event and the meaning of the |value| argument. Callbacks must * ignore unexpected |type| values. * * |SSL_CB_READ_ALERT| is signaled for each alert received, warning or fatal. * The |value| argument is a 16-bit value where the alert level (either * |SSL3_AL_WARNING| or |SSL3_AL_FATAL|) is in the most-significant eight bits * and the alert type (one of |SSL_AD_*|) is in the least-significant eight. * * |SSL_CB_WRITE_ALERT| is signaled for each alert sent. The |value| argument * is constructed as with |SSL_CB_READ_ALERT|. * * |SSL_CB_HANDSHAKE_START| is signaled when a handshake begins. The |value| * argument is always one. * * |SSL_CB_HANDSHAKE_DONE| is signaled when a handshake completes successfully. * The |value| argument is always one. If a handshake False Starts, this event * may be used to determine when the Finished message is received. * * The following event types expose implementation details of the handshake * state machine. Consuming them is deprecated. * * |SSL_CB_ACCEPT_LOOP| (respectively, |SSL_CB_CONNECT_LOOP|) is signaled when * a server (respectively, client) handshake progresses. The |value| argument * is always one. * * |SSL_CB_ACCEPT_EXIT| (respectively, |SSL_CB_CONNECT_EXIT|) is signaled when * a server (respectively, client) handshake completes, fails, or is paused. * The |value| argument is one if the handshake succeeded and <= 0 * otherwise. */ OPENSSL_EXPORT void SSL_CTX_set_info_callback( SSL_CTX *ctx, void (*cb)(const SSL *ssl, int type, int value)); /* SSL_CTX_get_info_callback returns the callback set by * |SSL_CTX_set_info_callback|. */ OPENSSL_EXPORT void (*SSL_CTX_get_info_callback(SSL_CTX *ctx))(const SSL *ssl, int type, int value); /* SSL_set_info_callback configures a callback to be run at various events * during a connection's lifetime. See |SSL_CTX_set_info_callback|. */ OPENSSL_EXPORT void SSL_set_info_callback( SSL *ssl, void (*cb)(const SSL *ssl, int type, int value)); /* SSL_get_info_callback returns the callback set by |SSL_set_info_callback|. */ OPENSSL_EXPORT void (*SSL_get_info_callback(const SSL *ssl))(const SSL *ssl, int type, int value); /* SSL_state_string_long returns the current state of the handshake state * machine as a string. This may be useful for debugging and logging. */ OPENSSL_EXPORT const char *SSL_state_string_long(const SSL *ssl); /* SSL_set_SSL_CTX partially changes |ssl|'s |SSL_CTX|. |ssl| will use the * certificate and session_id_context from |ctx|, and |SSL_get_SSL_CTX| will * report |ctx|. However most settings and the session cache itself will * continue to use the initial |SSL_CTX|. It is often used as part of SNI. * * TODO(davidben): Make a better story here and get rid of this API. Also * determine if there's anything else affected by |SSL_set_SSL_CTX| that * matters. Not as many values are affected as one might initially think. The * session cache explicitly selects the initial |SSL_CTX|. Most settings are * copied at |SSL_new| so |ctx|'s versions don't apply. This, notably, has some * consequences for any plans to make |SSL| copy-on-write most of its * configuration. */ OPENSSL_EXPORT SSL_CTX *SSL_set_SSL_CTX(SSL *ssl, SSL_CTX *ctx); #define SSL_SENT_SHUTDOWN 1 #define SSL_RECEIVED_SHUTDOWN 2 /* SSL_get_shutdown returns a bitmask with a subset of |SSL_SENT_SHUTDOWN| and * |SSL_RECEIVED_SHUTDOWN| to query whether close_notify was sent or received, * respectively. */ OPENSSL_EXPORT int SSL_get_shutdown(const SSL *ssl); /* SSL_get_peer_signature_algorithm returns the signature algorithm used by the * peer. If not applicable, it returns zero. */ OPENSSL_EXPORT uint16_t SSL_get_peer_signature_algorithm(const SSL *ssl); /* SSL_get_client_random writes up to |max_out| bytes of the most recent * handshake's client_random to |out| and returns the number of bytes written. * If |max_out| is zero, it returns the size of the client_random. */ OPENSSL_EXPORT size_t SSL_get_client_random(const SSL *ssl, uint8_t *out, size_t max_out); /* SSL_get_server_random writes up to |max_out| bytes of the most recent * handshake's server_random to |out| and returns the number of bytes written. * If |max_out| is zero, it returns the size of the server_random. */ OPENSSL_EXPORT size_t SSL_get_server_random(const SSL *ssl, uint8_t *out, size_t max_out); /* SSL_get_pending_cipher returns the cipher suite for the current handshake or * NULL if one has not been negotiated yet or there is no pending handshake. */ OPENSSL_EXPORT const SSL_CIPHER *SSL_get_pending_cipher(const SSL *ssl); /* SSL_set_retain_only_sha256_of_client_certs, on a server, sets whether only * the SHA-256 hash of peer's certificate should be saved in memory and in the * session. This can save memory, ticket size and session cache space. If * enabled, |SSL_get_peer_certificate| will return NULL after the handshake * completes. See the |peer_sha256| field of |SSL_SESSION| for the hash. */ OPENSSL_EXPORT void SSL_set_retain_only_sha256_of_client_certs(SSL *ssl, int enable); /* SSL_CTX_set_retain_only_sha256_of_client_certs, on a server, sets whether * only the SHA-256 hash of peer's certificate should be saved in memory and in * the session. This can save memory, ticket size and session cache space. If * enabled, |SSL_get_peer_certificate| will return NULL after the handshake * completes. See the |peer_sha256| field of |SSL_SESSION| for the hash. */ OPENSSL_EXPORT void SSL_CTX_set_retain_only_sha256_of_client_certs(SSL_CTX *ctx, int enable); /* SSL_CTX_set_grease_enabled configures whether sockets on |ctx| should enable * GREASE. See draft-davidben-tls-grease-01. */ OPENSSL_EXPORT void SSL_CTX_set_grease_enabled(SSL_CTX *ctx, int enabled); /* SSL_max_seal_overhead returns the maximum overhead, in bytes, of sealing a * record with |ssl|. */ OPENSSL_EXPORT size_t SSL_max_seal_overhead(const SSL *ssl); /* SSL_CTX_set_short_header_enabled configures whether a short record header in * TLS 1.3 may be negotiated. This allows client and server to negotiate * https://github.com/tlswg/tls13-spec/pull/762 for testing. */ OPENSSL_EXPORT void SSL_CTX_set_short_header_enabled(SSL_CTX *ctx, int enabled); /* Deprecated functions. */ /* SSL_library_init calls |CRYPTO_library_init| and returns one. */ OPENSSL_EXPORT int SSL_library_init(void); /* SSL_CIPHER_description writes a description of |cipher| into |buf| and * returns |buf|. If |buf| is NULL, it returns a newly allocated string, to be * freed with |OPENSSL_free|, or NULL on error. * * The description includes a trailing newline and has the form: * AES128-SHA Kx=RSA Au=RSA Enc=AES(128) Mac=SHA1 * * Consider |SSL_CIPHER_get_name| or |SSL_CIPHER_get_rfc_name| instead. */ OPENSSL_EXPORT const char *SSL_CIPHER_description(const SSL_CIPHER *cipher, char *buf, int len); /* SSL_CIPHER_get_version returns the string "TLSv1/SSLv3". */ OPENSSL_EXPORT const char *SSL_CIPHER_get_version(const SSL_CIPHER *cipher); typedef void COMP_METHOD; /* SSL_COMP_get_compression_methods returns NULL. */ OPENSSL_EXPORT COMP_METHOD *SSL_COMP_get_compression_methods(void); /* SSL_COMP_add_compression_method returns one. */ OPENSSL_EXPORT int SSL_COMP_add_compression_method(int id, COMP_METHOD *cm); /* SSL_COMP_get_name returns NULL. */ OPENSSL_EXPORT const char *SSL_COMP_get_name(const COMP_METHOD *comp); /* SSL_COMP_free_compression_methods does nothing. */ OPENSSL_EXPORT void SSL_COMP_free_compression_methods(void); /* SSLv23_method calls |TLS_method|. */ OPENSSL_EXPORT const SSL_METHOD *SSLv23_method(void); /* These version-specific methods behave exactly like |TLS_method| and * |DTLS_method| except they also call |SSL_CTX_set_min_proto_version| and * |SSL_CTX_set_max_proto_version| to lock connections to that protocol * version. */ OPENSSL_EXPORT const SSL_METHOD *SSLv3_method(void); OPENSSL_EXPORT const SSL_METHOD *TLSv1_method(void); OPENSSL_EXPORT const SSL_METHOD *TLSv1_1_method(void); OPENSSL_EXPORT const SSL_METHOD *TLSv1_2_method(void); OPENSSL_EXPORT const SSL_METHOD *DTLSv1_method(void); OPENSSL_EXPORT const SSL_METHOD *DTLSv1_2_method(void); /* These client- and server-specific methods call their corresponding generic * methods. */ OPENSSL_EXPORT const SSL_METHOD *TLS_server_method(void); OPENSSL_EXPORT const SSL_METHOD *TLS_client_method(void); OPENSSL_EXPORT const SSL_METHOD *SSLv23_server_method(void); OPENSSL_EXPORT const SSL_METHOD *SSLv23_client_method(void); OPENSSL_EXPORT const SSL_METHOD *SSLv3_server_method(void); OPENSSL_EXPORT const SSL_METHOD *SSLv3_client_method(void); OPENSSL_EXPORT const SSL_METHOD *TLSv1_server_method(void); OPENSSL_EXPORT const SSL_METHOD *TLSv1_client_method(void); OPENSSL_EXPORT const SSL_METHOD *TLSv1_1_server_method(void); OPENSSL_EXPORT const SSL_METHOD *TLSv1_1_client_method(void); OPENSSL_EXPORT const SSL_METHOD *TLSv1_2_server_method(void); OPENSSL_EXPORT const SSL_METHOD *TLSv1_2_client_method(void); OPENSSL_EXPORT const SSL_METHOD *DTLS_server_method(void); OPENSSL_EXPORT const SSL_METHOD *DTLS_client_method(void); OPENSSL_EXPORT const SSL_METHOD *DTLSv1_server_method(void); OPENSSL_EXPORT const SSL_METHOD *DTLSv1_client_method(void); OPENSSL_EXPORT const SSL_METHOD *DTLSv1_2_server_method(void); OPENSSL_EXPORT const SSL_METHOD *DTLSv1_2_client_method(void); /* SSL_clear resets |ssl| to allow another connection and returns one on success * or zero on failure. It returns most configuration state but releases memory * associated with the current connection. * * Free |ssl| and create a new one instead. */ OPENSSL_EXPORT int SSL_clear(SSL *ssl); /* SSL_CTX_set_tmp_rsa_callback does nothing. */ OPENSSL_EXPORT void SSL_CTX_set_tmp_rsa_callback( SSL_CTX *ctx, RSA *(*cb)(SSL *ssl, int is_export, int keylength)); /* SSL_set_tmp_rsa_callback does nothing. */ OPENSSL_EXPORT void SSL_set_tmp_rsa_callback(SSL *ssl, RSA *(*cb)(SSL *ssl, int is_export, int keylength)); /* SSL_CTX_sess_connect returns zero. */ OPENSSL_EXPORT int SSL_CTX_sess_connect(const SSL_CTX *ctx); /* SSL_CTX_sess_connect_good returns zero. */ OPENSSL_EXPORT int SSL_CTX_sess_connect_good(const SSL_CTX *ctx); /* SSL_CTX_sess_connect_renegotiate returns zero. */ OPENSSL_EXPORT int SSL_CTX_sess_connect_renegotiate(const SSL_CTX *ctx); /* SSL_CTX_sess_accept returns zero. */ OPENSSL_EXPORT int SSL_CTX_sess_accept(const SSL_CTX *ctx); /* SSL_CTX_sess_accept_renegotiate returns zero. */ OPENSSL_EXPORT int SSL_CTX_sess_accept_renegotiate(const SSL_CTX *ctx); /* SSL_CTX_sess_accept_good returns zero. */ OPENSSL_EXPORT int SSL_CTX_sess_accept_good(const SSL_CTX *ctx); /* SSL_CTX_sess_hits returns zero. */ OPENSSL_EXPORT int SSL_CTX_sess_hits(const SSL_CTX *ctx); /* SSL_CTX_sess_cb_hits returns zero. */ OPENSSL_EXPORT int SSL_CTX_sess_cb_hits(const SSL_CTX *ctx); /* SSL_CTX_sess_misses returns zero. */ OPENSSL_EXPORT int SSL_CTX_sess_misses(const SSL_CTX *ctx); /* SSL_CTX_sess_timeouts returns zero. */ OPENSSL_EXPORT int SSL_CTX_sess_timeouts(const SSL_CTX *ctx); /* SSL_CTX_sess_cache_full returns zero. */ OPENSSL_EXPORT int SSL_CTX_sess_cache_full(const SSL_CTX *ctx); /* SSL_cutthrough_complete calls |SSL_in_false_start|. */ OPENSSL_EXPORT int SSL_cutthrough_complete(const SSL *s); /* SSL_num_renegotiations calls |SSL_total_renegotiations|. */ OPENSSL_EXPORT int SSL_num_renegotiations(const SSL *ssl); /* SSL_CTX_need_tmp_RSA returns zero. */ OPENSSL_EXPORT int SSL_CTX_need_tmp_RSA(const SSL_CTX *ctx); /* SSL_need_tmp_RSA returns zero. */ OPENSSL_EXPORT int SSL_need_tmp_RSA(const SSL *ssl); /* SSL_CTX_set_tmp_rsa returns one. */ OPENSSL_EXPORT int SSL_CTX_set_tmp_rsa(SSL_CTX *ctx, const RSA *rsa); /* SSL_set_tmp_rsa returns one. */ OPENSSL_EXPORT int SSL_set_tmp_rsa(SSL *ssl, const RSA *rsa); /* SSL_CTX_get_read_ahead returns zero. */ OPENSSL_EXPORT int SSL_CTX_get_read_ahead(const SSL_CTX *ctx); /* SSL_CTX_set_read_ahead does nothing. */ OPENSSL_EXPORT void SSL_CTX_set_read_ahead(SSL_CTX *ctx, int yes); /* SSL_get_read_ahead returns zero. */ OPENSSL_EXPORT int SSL_get_read_ahead(const SSL *s); /* SSL_set_read_ahead does nothing. */ OPENSSL_EXPORT void SSL_set_read_ahead(SSL *s, int yes); /* SSL_renegotiate put an error on the error queue and returns zero. */ OPENSSL_EXPORT int SSL_renegotiate(SSL *ssl); /* SSL_set_state does nothing. */ OPENSSL_EXPORT void SSL_set_state(SSL *ssl, int state); /* SSL_get_shared_ciphers writes an empty string to |buf| and returns a * pointer to |buf|, or NULL if |len| is less than or equal to zero. */ OPENSSL_EXPORT char *SSL_get_shared_ciphers(const SSL *ssl, char *buf, int len); /* SSL_MODE_HANDSHAKE_CUTTHROUGH is the same as SSL_MODE_ENABLE_FALSE_START. */ #define SSL_MODE_HANDSHAKE_CUTTHROUGH SSL_MODE_ENABLE_FALSE_START /* i2d_SSL_SESSION serializes |in| to the bytes pointed to by |*pp|. On success, * it returns the number of bytes written and advances |*pp| by that many bytes. * On failure, it returns -1. If |pp| is NULL, no bytes are written and only the * length is returned. * * Use |SSL_SESSION_to_bytes| instead. */ OPENSSL_EXPORT int i2d_SSL_SESSION(SSL_SESSION *in, uint8_t **pp); /* d2i_SSL_SESSION parses a serialized session from the |length| bytes pointed * to by |*pp|. It returns the new |SSL_SESSION| and advances |*pp| by the * number of bytes consumed on success and NULL on failure. The caller takes * ownership of the new session and must call |SSL_SESSION_free| when done. * * If |a| is non-NULL, |*a| is released and set the new |SSL_SESSION|. * * Use |SSL_SESSION_from_bytes| instead. */ OPENSSL_EXPORT SSL_SESSION *d2i_SSL_SESSION(SSL_SESSION **a, const uint8_t **pp, long length); /* i2d_SSL_SESSION_bio serializes |session| and writes the result to |bio|. It * returns the number of bytes written on success and <= 0 on error. */ OPENSSL_EXPORT int i2d_SSL_SESSION_bio(BIO *bio, const SSL_SESSION *session); /* d2i_SSL_SESSION_bio reads a serialized |SSL_SESSION| from |bio| and returns a * newly-allocated |SSL_SESSION| or NULL on error. If |out| is not NULL, it also * frees |*out| and sets |*out| to the new |SSL_SESSION|. */ OPENSSL_EXPORT SSL_SESSION *d2i_SSL_SESSION_bio(BIO *bio, SSL_SESSION **out); /* ERR_load_SSL_strings does nothing. */ OPENSSL_EXPORT void ERR_load_SSL_strings(void); /* SSL_load_error_strings does nothing. */ OPENSSL_EXPORT void SSL_load_error_strings(void); /* SSL_CTX_set_tlsext_use_srtp calls |SSL_CTX_set_srtp_profiles|. It returns * zero on success and one on failure. * * WARNING: this function is dangerous because it breaks the usual return value * convention. Use |SSL_CTX_set_srtp_profiles| instead. */ OPENSSL_EXPORT int SSL_CTX_set_tlsext_use_srtp(SSL_CTX *ctx, const char *profiles); /* SSL_set_tlsext_use_srtp calls |SSL_set_srtp_profiles|. It returns zero on * success and one on failure. * * WARNING: this function is dangerous because it breaks the usual return value * convention. Use |SSL_set_srtp_profiles| instead. */ OPENSSL_EXPORT int SSL_set_tlsext_use_srtp(SSL *ssl, const char *profiles); /* SSL_get_current_compression returns NULL. */ OPENSSL_EXPORT const COMP_METHOD *SSL_get_current_compression(SSL *s); /* SSL_get_current_expansion returns NULL. */ OPENSSL_EXPORT const COMP_METHOD *SSL_get_current_expansion(SSL *s); /* SSL_get_server_tmp_key returns zero. */ OPENSSL_EXPORT int *SSL_get_server_tmp_key(SSL *ssl, EVP_PKEY **out_key); #define SSL_set_app_data(s, arg) (SSL_set_ex_data(s, 0, (char *)(arg))) #define SSL_get_app_data(s) (SSL_get_ex_data(s, 0)) #define SSL_SESSION_set_app_data(s, a) \ (SSL_SESSION_set_ex_data(s, 0, (char *)(a))) #define SSL_SESSION_get_app_data(s) (SSL_SESSION_get_ex_data(s, 0)) #define SSL_CTX_get_app_data(ctx) (SSL_CTX_get_ex_data(ctx, 0)) #define SSL_CTX_set_app_data(ctx, arg) \ (SSL_CTX_set_ex_data(ctx, 0, (char *)(arg))) #define OpenSSL_add_ssl_algorithms() SSL_library_init() #define SSLeay_add_ssl_algorithms() SSL_library_init() #define SSL_get_cipher(ssl) SSL_CIPHER_get_name(SSL_get_current_cipher(ssl)) #define SSL_get_cipher_bits(ssl, out_alg_bits) \ SSL_CIPHER_get_bits(SSL_get_current_cipher(ssl), out_alg_bits) #define SSL_get_cipher_version(ssl) \ SSL_CIPHER_get_version(SSL_get_current_cipher(ssl)) #define SSL_get_cipher_name(ssl) \ SSL_CIPHER_get_name(SSL_get_current_cipher(ssl)) #define SSL_get_time(session) SSL_SESSION_get_time(session) #define SSL_set_time(session, time) SSL_SESSION_set_time((session), (time)) #define SSL_get_timeout(session) SSL_SESSION_get_timeout(session) #define SSL_set_timeout(session, timeout) \ SSL_SESSION_set_timeout((session), (timeout)) typedef struct ssl_comp_st SSL_COMP; struct ssl_comp_st { int id; const char *name; char *method; }; DECLARE_STACK_OF(SSL_COMP) /* The following flags do nothing and are included only to make it easier to * compile code with BoringSSL. */ #define SSL_MODE_AUTO_RETRY 0 #define SSL_MODE_RELEASE_BUFFERS 0 #define SSL_MODE_SEND_CLIENTHELLO_TIME 0 #define SSL_MODE_SEND_SERVERHELLO_TIME 0 #define SSL_OP_ALL 0 #define SSL_OP_ALLOW_UNSAFE_LEGACY_RENEGOTIATION 0 #define SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS 0 #define SSL_OP_EPHEMERAL_RSA 0 #define SSL_OP_LEGACY_SERVER_CONNECT 0 #define SSL_OP_MICROSOFT_BIG_SSLV3_BUFFER 0 #define SSL_OP_MICROSOFT_SESS_ID_BUG 0 #define SSL_OP_MSIE_SSLV2_RSA_PADDING 0 #define SSL_OP_NETSCAPE_CA_DN_BUG 0 #define SSL_OP_NETSCAPE_CHALLENGE_BUG 0 #define SSL_OP_NETSCAPE_DEMO_CIPHER_CHANGE_BUG 0 #define SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG 0 #define SSL_OP_NO_COMPRESSION 0 #define SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION 0 #define SSL_OP_NO_SSLv2 0 #define SSL_OP_PKCS1_CHECK_1 0 #define SSL_OP_PKCS1_CHECK_2 0 #define SSL_OP_SINGLE_DH_USE 0 #define SSL_OP_SINGLE_ECDH_USE 0 #define SSL_OP_SSLEAY_080_CLIENT_DH_BUG 0 #define SSL_OP_SSLREF2_REUSE_CERT_TYPE_BUG 0 #define SSL_OP_TLS_BLOCK_PADDING_BUG 0 #define SSL_OP_TLS_D5_BUG 0 #define SSL_OP_TLS_ROLLBACK_BUG 0 #define SSL_VERIFY_CLIENT_ONCE 0 /* SSL_cache_hit calls |SSL_session_reused|. */ OPENSSL_EXPORT int SSL_cache_hit(SSL *ssl); /* SSL_get_default_timeout returns |SSL_DEFAULT_SESSION_TIMEOUT|. */ OPENSSL_EXPORT long SSL_get_default_timeout(const SSL *ssl); /* SSL_get_version returns a string describing the TLS version used by |ssl|. * For example, "TLSv1.2" or "SSLv3". */ OPENSSL_EXPORT const char *SSL_get_version(const SSL *ssl); /* SSL_get_cipher_list returns the name of the |n|th cipher in the output of * |SSL_get_ciphers| or NULL if out of range. Use |SSL_get_ciphers| instead. */ OPENSSL_EXPORT const char *SSL_get_cipher_list(const SSL *ssl, int n); /* SSL_CTX_set_client_cert_cb sets a callback which is called on the client if * the server requests a client certificate and none is configured. On success, * the callback should return one and set |*out_x509| to |*out_pkey| to a leaf * certificate and private key, respectively, passing ownership. It should * return zero to send no certificate and -1 to fail or pause the handshake. If * the handshake is paused, |SSL_get_error| will return * |SSL_ERROR_WANT_X509_LOOKUP|. * * The callback may call |SSL_get0_certificate_types| and * |SSL_get_client_CA_list| for information on the server's certificate request. * * Use |SSL_CTX_set_cert_cb| instead. Configuring intermediate certificates with * this function is confusing. This callback may not be registered concurrently * with |SSL_CTX_set_cert_cb| or |SSL_set_cert_cb|. */ OPENSSL_EXPORT void SSL_CTX_set_client_cert_cb( SSL_CTX *ctx, int (*client_cert_cb)(SSL *ssl, X509 **out_x509, EVP_PKEY **out_pkey)); #define SSL_NOTHING 1 #define SSL_WRITING 2 #define SSL_READING 3 #define SSL_X509_LOOKUP 4 #define SSL_CHANNEL_ID_LOOKUP 5 #define SSL_PENDING_SESSION 7 #define SSL_CERTIFICATE_SELECTION_PENDING 8 #define SSL_PRIVATE_KEY_OPERATION 9 /* SSL_want returns one of the above values to determine what the most recent * operation on |ssl| was blocked on. Use |SSL_get_error| instead. */ OPENSSL_EXPORT int SSL_want(const SSL *ssl); #define SSL_want_read(ssl) (SSL_want(ssl) == SSL_READING) #define SSL_want_write(ssl) (SSL_want(ssl) == SSL_WRITING) /* SSL_get_finished writes up to |count| bytes of the Finished message sent by * |ssl| to |buf|. It returns the total untruncated length or zero if none has * been sent yet. At SSL 3.0 or TLS 1.3 and later, it returns zero. * * Use |SSL_get_tls_unique| instead. */ OPENSSL_EXPORT size_t SSL_get_finished(const SSL *ssl, void *buf, size_t count); /* SSL_get_peer_finished writes up to |count| bytes of the Finished message * received from |ssl|'s peer to |buf|. It returns the total untruncated length * or zero if none has been received yet. At SSL 3.0 or TLS 1.3 and later, it * returns zero. * * Use |SSL_get_tls_unique| instead. */ OPENSSL_EXPORT size_t SSL_get_peer_finished(const SSL *ssl, void *buf, size_t count); /* SSL_alert_type_string returns "!". Use |SSL_alert_type_string_long| * instead. */ OPENSSL_EXPORT const char *SSL_alert_type_string(int value); /* SSL_alert_desc_string returns "!!". Use |SSL_alert_desc_string_long| * instead. */ OPENSSL_EXPORT const char *SSL_alert_desc_string(int value); /* SSL_TXT_* expand to strings. */ #define SSL_TXT_MEDIUM "MEDIUM" #define SSL_TXT_HIGH "HIGH" #define SSL_TXT_FIPS "FIPS" #define SSL_TXT_kRSA "kRSA" #define SSL_TXT_kDHE "kDHE" #define SSL_TXT_kEDH "kEDH" #define SSL_TXT_kECDHE "kECDHE" #define SSL_TXT_kEECDH "kEECDH" #define SSL_TXT_kPSK "kPSK" #define SSL_TXT_aRSA "aRSA" #define SSL_TXT_aECDSA "aECDSA" #define SSL_TXT_aPSK "aPSK" #define SSL_TXT_DH "DH" #define SSL_TXT_DHE "DHE" #define SSL_TXT_EDH "EDH" #define SSL_TXT_RSA "RSA" #define SSL_TXT_ECDH "ECDH" #define SSL_TXT_ECDHE "ECDHE" #define SSL_TXT_EECDH "EECDH" #define SSL_TXT_ECDSA "ECDSA" #define SSL_TXT_PSK "PSK" #define SSL_TXT_3DES "3DES" #define SSL_TXT_RC4 "RC4" #define SSL_TXT_AES128 "AES128" #define SSL_TXT_AES256 "AES256" #define SSL_TXT_AES "AES" #define SSL_TXT_AES_GCM "AESGCM" #define SSL_TXT_CHACHA20 "CHACHA20" #define SSL_TXT_MD5 "MD5" #define SSL_TXT_SHA1 "SHA1" #define SSL_TXT_SHA "SHA" #define SSL_TXT_SHA256 "SHA256" #define SSL_TXT_SHA384 "SHA384" #define SSL_TXT_SSLV3 "SSLv3" #define SSL_TXT_TLSV1 "TLSv1" #define SSL_TXT_TLSV1_1 "TLSv1.1" #define SSL_TXT_TLSV1_2 "TLSv1.2" #define SSL_TXT_TLSV1_3 "TLSv1.3" #define SSL_TXT_ALL "ALL" #define SSL_TXT_CMPDEF "COMPLEMENTOFDEFAULT" typedef struct ssl_conf_ctx_st SSL_CONF_CTX; /* SSL_state returns |SSL_ST_INIT| if a handshake is in progress and |SSL_ST_OK| * otherwise. * * Use |SSL_is_init| instead. */ OPENSSL_EXPORT int SSL_state(const SSL *ssl); #define SSL_get_state(ssl) SSL_state(ssl) /* SSL_state_string returns the current state of the handshake state machine as * a six-letter string. Use |SSL_state_string_long| for a more intelligible * string. */ OPENSSL_EXPORT const char *SSL_state_string(const SSL *ssl); /* SSL_set_shutdown causes |ssl| to behave as if the shutdown bitmask (see * |SSL_get_shutdown|) were |mode|. This may be used to skip sending or * receiving close_notify in |SSL_shutdown| by causing the implementation to * believe the events already happened. * * It is an error to use |SSL_set_shutdown| to unset a bit that has already been * set. Doing so will trigger an |assert| in debug builds and otherwise be * ignored. * * Use |SSL_CTX_set_quiet_shutdown| instead. */ OPENSSL_EXPORT void SSL_set_shutdown(SSL *ssl, int mode); /* SSL_CTX_set_tmp_ecdh calls |SSL_CTX_set1_curves| with a one-element list * containing |ec_key|'s curve. */ OPENSSL_EXPORT int SSL_CTX_set_tmp_ecdh(SSL_CTX *ctx, const EC_KEY *ec_key); /* SSL_set_tmp_ecdh calls |SSL_set1_curves| with a one-element list containing * |ec_key|'s curve. */ OPENSSL_EXPORT int SSL_set_tmp_ecdh(SSL *ssl, const EC_KEY *ec_key); /* SSL_add_dir_cert_subjects_to_stack lists files in directory |dir|. It calls * |SSL_add_file_cert_subjects_to_stack| on each file and returns one on success * or zero on error. This function is only available from the libdecrepit * library. */ OPENSSL_EXPORT int SSL_add_dir_cert_subjects_to_stack(STACK_OF(X509_NAME) *out, const char *dir); /* SSL_set_private_key_digest_prefs copies |num_digests| NIDs from |digest_nids| * into |ssl|. These digests will be used, in decreasing order of preference, * when signing with |ssl|'s private key. It returns one on success and zero on * error. * * Use |SSL_set_signing_algorithm_prefs| instead. * * TODO(davidben): Remove this API when callers have been updated. */ OPENSSL_EXPORT int SSL_set_private_key_digest_prefs(SSL *ssl, const int *digest_nids, size_t num_digests); /* SSL_set_verify_result calls |abort| unless |result| is |X509_V_OK|. * * TODO(davidben): Remove this function once it has been removed from * netty-tcnative. */ OPENSSL_EXPORT void SSL_set_verify_result(SSL *ssl, long result); /* SSL_CTX_set_min_version calls |SSL_CTX_set_min_proto_version|. */ OPENSSL_EXPORT int SSL_CTX_set_min_version(SSL_CTX *ctx, uint16_t version); /* SSL_CTX_set_max_version calls |SSL_CTX_set_max_proto_version|. */ OPENSSL_EXPORT int SSL_CTX_set_max_version(SSL_CTX *ctx, uint16_t version); /* SSL_set_min_version calls |SSL_set_min_proto_version|. */ OPENSSL_EXPORT int SSL_set_min_version(SSL *ssl, uint16_t version); /* SSL_set_max_version calls |SSL_set_max_proto_version|. */ OPENSSL_EXPORT int SSL_set_max_version(SSL *ssl, uint16_t version); /* SSL_CTX_enable_tls_channel_id calls |SSL_CTX_set_tls_channel_id_enabled|. */ OPENSSL_EXPORT int SSL_CTX_enable_tls_channel_id(SSL_CTX *ctx); /* SSL_enable_tls_channel_id calls |SSL_set_tls_channel_id_enabled|. */ OPENSSL_EXPORT int SSL_enable_tls_channel_id(SSL *ssl); /* BIO_f_ssl returns a |BIO_METHOD| that can wrap an |SSL*| in a |BIO*|. Note * that this has quite different behaviour from the version in OpenSSL (notably * that it doesn't try to auto renegotiate). * * IMPORTANT: if you are not curl, don't use this. */ OPENSSL_EXPORT const BIO_METHOD *BIO_f_ssl(void); /* BIO_set_ssl sets |ssl| as the underlying connection for |bio|, which must * have been created using |BIO_f_ssl|. If |take_owership| is true, |bio| will * call |SSL_free| on |ssl| when closed. It returns one on success or something * other than one on error. */ OPENSSL_EXPORT long BIO_set_ssl(BIO *bio, SSL *ssl, int take_owership); /* Private structures. * * This structures are exposed for historical reasons, but access to them is * deprecated. */ typedef struct ssl_protocol_method_st SSL_PROTOCOL_METHOD; typedef struct ssl_x509_method_st SSL_X509_METHOD; struct ssl_cipher_st { /* name is the OpenSSL name for the cipher. */ const char *name; /* id is the cipher suite value bitwise OR-d with 0x03000000. */ uint32_t id; /* algorithm_* are internal fields. See ssl/internal.h for their values. */ uint32_t algorithm_mkey; uint32_t algorithm_auth; uint32_t algorithm_enc; uint32_t algorithm_mac; uint32_t algorithm_prf; }; #define SSL_MAX_SSL_SESSION_ID_LENGTH 32 #define SSL_MAX_SID_CTX_LENGTH 32 #define SSL_MAX_MASTER_KEY_LENGTH 48 struct ssl_session_st { CRYPTO_refcount_t references; int ssl_version; /* what ssl version session info is being kept in here? */ /* group_id is the ID of the ECDH group used to establish this session or zero * if not applicable or unknown. */ uint16_t group_id; /* peer_signature_algorithm is the signature algorithm used to authenticate * the peer, or zero if not applicable or unknown. */ uint16_t peer_signature_algorithm; /* master_key, in TLS 1.2 and below, is the master secret associated with the * session. In TLS 1.3 and up, it is the resumption secret. */ int master_key_length; uint8_t master_key[SSL_MAX_MASTER_KEY_LENGTH]; /* session_id - valid? */ unsigned int session_id_length; uint8_t session_id[SSL_MAX_SSL_SESSION_ID_LENGTH]; /* this is used to determine whether the session is being reused in * the appropriate context. It is up to the application to set this, * via SSL_new */ uint8_t sid_ctx_length; uint8_t sid_ctx[SSL_MAX_SID_CTX_LENGTH]; char *psk_identity; /* certs contains the certificate chain from the peer, starting with the leaf * certificate. */ STACK_OF(CRYPTO_BUFFER) *certs; const SSL_X509_METHOD *x509_method; /* x509_peer is the peer's certificate. */ X509 *x509_peer; /* x509_chain is the certificate chain sent by the peer. NOTE: for historical * reasons, when a client (so the peer is a server), the chain includes * |peer|, but when a server it does not. */ STACK_OF(X509) *x509_chain; /* x509_chain_without_leaf is a lazily constructed copy of |x509_chain| that * omits the leaf certificate. This exists because OpenSSL, historically, * didn't include the leaf certificate in the chain for a server, but did for * a client. The |x509_chain| always includes it and, if an API call requires * a chain without, it is stored here. */ STACK_OF(X509) *x509_chain_without_leaf; /* verify_result is the result of certificate verification in the case of * non-fatal certificate errors. */ long verify_result; /* timeout is the lifetime of the session in seconds, measured from |time|. * This is renewable up to |auth_timeout|. */ long timeout; /* auth_timeout is the non-renewable lifetime of the session in seconds, * measured from |time|. */ long auth_timeout; /* time is the time the session was issued, measured in seconds from the UNIX * epoch. */ long time; const SSL_CIPHER *cipher; CRYPTO_EX_DATA ex_data; /* application specific data */ /* These are used to make removal of session-ids more efficient and to * implement a maximum cache size. */ SSL_SESSION *prev, *next; char *tlsext_hostname; /* RFC4507 info */ uint8_t *tlsext_tick; /* Session ticket */ size_t tlsext_ticklen; /* Session ticket length */ size_t tlsext_signed_cert_timestamp_list_length; uint8_t *tlsext_signed_cert_timestamp_list; /* Server's list. */ /* The OCSP response that came with the session. */ size_t ocsp_response_length; uint8_t *ocsp_response; /* peer_sha256 contains the SHA-256 hash of the peer's certificate if * |peer_sha256_valid| is true. */ uint8_t peer_sha256[SHA256_DIGEST_LENGTH]; /* original_handshake_hash contains the handshake hash (either SHA-1+MD5 or * SHA-2, depending on TLS version) for the original, full handshake that * created a session. This is used by Channel IDs during resumption. */ uint8_t original_handshake_hash[EVP_MAX_MD_SIZE]; uint8_t original_handshake_hash_len; uint32_t tlsext_tick_lifetime_hint; /* Session lifetime hint in seconds */ uint32_t ticket_age_add; /* ticket_max_early_data is the maximum amount of data allowed to be sent as * early data. If zero, 0-RTT is disallowed. */ uint32_t ticket_max_early_data; /* early_alpn is the ALPN protocol from the initial handshake. This is only * stored for TLS 1.3 and above in order to enforce ALPN matching for 0-RTT * resumptions. */ uint8_t *early_alpn; size_t early_alpn_len; /* extended_master_secret is true if the master secret in this session was * generated using EMS and thus isn't vulnerable to the Triple Handshake * attack. */ unsigned extended_master_secret:1; /* peer_sha256_valid is non-zero if |peer_sha256| is valid. */ unsigned peer_sha256_valid:1; /* Non-zero if peer_sha256 is valid */ /* not_resumable is used to indicate that session resumption is disallowed. */ unsigned not_resumable:1; /* ticket_age_add_valid is non-zero if |ticket_age_add| is valid. */ unsigned ticket_age_add_valid:1; /* is_server is true if this session was created by a server. */ unsigned is_server:1; }; /* ssl_cipher_preference_list_st contains a list of SSL_CIPHERs with * equal-preference groups. For TLS clients, the groups are moot because the * server picks the cipher and groups cannot be expressed on the wire. However, * for servers, the equal-preference groups allow the client's preferences to * be partially respected. (This only has an effect with * SSL_OP_CIPHER_SERVER_PREFERENCE). * * The equal-preference groups are expressed by grouping SSL_CIPHERs together. * All elements of a group have the same priority: no ordering is expressed * within a group. * * The values in |ciphers| are in one-to-one correspondence with * |in_group_flags|. (That is, sk_SSL_CIPHER_num(ciphers) is the number of * bytes in |in_group_flags|.) The bytes in |in_group_flags| are either 1, to * indicate that the corresponding SSL_CIPHER is not the last element of a * group, or 0 to indicate that it is. * * For example, if |in_group_flags| contains all zeros then that indicates a * traditional, fully-ordered preference. Every SSL_CIPHER is the last element * of the group (i.e. they are all in a one-element group). * * For a more complex example, consider: * ciphers: A B C D E F * in_group_flags: 1 1 0 0 1 0 * * That would express the following, order: * * A E * B -> D -> F * C */ struct ssl_cipher_preference_list_st { STACK_OF(SSL_CIPHER) *ciphers; uint8_t *in_group_flags; }; /* ssl_ctx_st (aka |SSL_CTX|) contains configuration common to several SSL * connections. */ struct ssl_ctx_st { const SSL_PROTOCOL_METHOD *method; const SSL_X509_METHOD *x509_method; /* lock is used to protect various operations on this object. */ CRYPTO_MUTEX lock; /* max_version is the maximum acceptable protocol version. Note this version * is normalized in DTLS. */ uint16_t max_version; /* min_version is the minimum acceptable protocol version. Note this version * is normalized in DTLS. */ uint16_t min_version; struct ssl_cipher_preference_list_st *cipher_list; X509_STORE *cert_store; LHASH_OF(SSL_SESSION) *sessions; /* Most session-ids that will be cached, default is * SSL_SESSION_CACHE_MAX_SIZE_DEFAULT. 0 is unlimited. */ unsigned long session_cache_size; SSL_SESSION *session_cache_head; SSL_SESSION *session_cache_tail; /* handshakes_since_cache_flush is the number of successful handshakes since * the last cache flush. */ int handshakes_since_cache_flush; /* This can have one of 2 values, ored together, * SSL_SESS_CACHE_CLIENT, * SSL_SESS_CACHE_SERVER, * Default is SSL_SESSION_CACHE_SERVER, which means only * SSL_accept which cache SSL_SESSIONS. */ int session_cache_mode; /* session_timeout is the default lifetime for new sessions in TLS 1.2 and * earlier, in seconds. */ long session_timeout; /* session_psk_dhe_timeout is the default lifetime for new sessions in TLS * 1.3, in seconds. */ long session_psk_dhe_timeout; /* If this callback is not null, it will be called each time a session id is * added to the cache. If this function returns 1, it means that the * callback will do a SSL_SESSION_free() when it has finished using it. * Otherwise, on 0, it means the callback has finished with it. If * remove_session_cb is not null, it will be called when a session-id is * removed from the cache. After the call, OpenSSL will SSL_SESSION_free() * it. */ int (*new_session_cb)(SSL *ssl, SSL_SESSION *sess); void (*remove_session_cb)(SSL_CTX *ctx, SSL_SESSION *sess); SSL_SESSION *(*get_session_cb)(SSL *ssl, uint8_t *data, int len, int *copy); CRYPTO_refcount_t references; /* if defined, these override the X509_verify_cert() calls */ int (*app_verify_callback)(X509_STORE_CTX *store_ctx, void *arg); void *app_verify_arg; /* Default password callback. */ pem_password_cb *default_passwd_callback; /* Default password callback user data. */ void *default_passwd_callback_userdata; /* get client cert callback */ int (*client_cert_cb)(SSL *ssl, X509 **out_x509, EVP_PKEY **out_pkey); /* get channel id callback */ void (*channel_id_cb)(SSL *ssl, EVP_PKEY **out_pkey); CRYPTO_EX_DATA ex_data; /* custom_*_extensions stores any callback sets for custom extensions. Note * that these pointers will be NULL if the stack would otherwise be empty. */ STACK_OF(SSL_CUSTOM_EXTENSION) *client_custom_extensions; STACK_OF(SSL_CUSTOM_EXTENSION) *server_custom_extensions; /* Default values used when no per-SSL value is defined follow */ void (*info_callback)(const SSL *ssl, int type, int value); /* what we put in client cert requests */ STACK_OF(X509_NAME) *client_CA; /* Default values to use in SSL structures follow (these are copied by * SSL_new) */ uint32_t options; uint32_t mode; uint32_t max_cert_list; struct cert_st /* CERT */ *cert; /* callback that allows applications to peek at protocol messages */ void (*msg_callback)(int write_p, int version, int content_type, const void *buf, size_t len, SSL *ssl, void *arg); void *msg_callback_arg; int verify_mode; int (*default_verify_callback)( int ok, X509_STORE_CTX *ctx); /* called 'verify_callback' in the SSL */ X509_VERIFY_PARAM *param; /* select_certificate_cb is called before most ClientHello processing and * before the decision whether to resume a session is made. It may return one * to continue the handshake or zero to cause the handshake loop to return * with an error and cause SSL_get_error to return * SSL_ERROR_PENDING_CERTIFICATE. Note: when the handshake loop is resumed, it * will not call the callback a second time. */ int (*select_certificate_cb)(const SSL_CLIENT_HELLO *); /* dos_protection_cb is called once the resumption decision for a ClientHello * has been made. It returns one to continue the handshake or zero to * abort. */ int (*dos_protection_cb) (const SSL_CLIENT_HELLO *); /* Maximum amount of data to send in one fragment. actual record size can be * more than this due to padding and MAC overheads. */ uint16_t max_send_fragment; /* TLS extensions servername callback */ int (*tlsext_servername_callback)(SSL *, int *, void *); void *tlsext_servername_arg; /* RFC 4507 session ticket keys */ uint8_t tlsext_tick_key_name[SSL_TICKET_KEY_NAME_LEN]; uint8_t tlsext_tick_hmac_key[16]; uint8_t tlsext_tick_aes_key[16]; /* Callback to support customisation of ticket key setting */ int (*tlsext_ticket_key_cb)(SSL *ssl, uint8_t *name, uint8_t *iv, EVP_CIPHER_CTX *ectx, HMAC_CTX *hctx, int enc); /* Server-only: psk_identity_hint is the default identity hint to send in * PSK-based key exchanges. */ char *psk_identity_hint; unsigned int (*psk_client_callback)(SSL *ssl, const char *hint, char *identity, unsigned int max_identity_len, uint8_t *psk, unsigned int max_psk_len); unsigned int (*psk_server_callback)(SSL *ssl, const char *identity, uint8_t *psk, unsigned int max_psk_len); /* retain_only_sha256_of_client_certs is true if we should compute the SHA256 * hash of the peer's certificate and then discard it to save memory and * session space. Only effective on the server side. */ char retain_only_sha256_of_client_certs; /* Next protocol negotiation information */ /* (for experimental NPN extension). */ /* For a server, this contains a callback function by which the set of * advertised protocols can be provided. */ int (*next_protos_advertised_cb)(SSL *ssl, const uint8_t **out, unsigned *out_len, void *arg); void *next_protos_advertised_cb_arg; /* For a client, this contains a callback function that selects the * next protocol from the list provided by the server. */ int (*next_proto_select_cb)(SSL *ssl, uint8_t **out, uint8_t *out_len, const uint8_t *in, unsigned in_len, void *arg); void *next_proto_select_cb_arg; /* ALPN information * (we are in the process of transitioning from NPN to ALPN.) */ /* For a server, this contains a callback function that allows the * server to select the protocol for the connection. * out: on successful return, this must point to the raw protocol * name (without the length prefix). * outlen: on successful return, this contains the length of |*out|. * in: points to the client's list of supported protocols in * wire-format. * inlen: the length of |in|. */ int (*alpn_select_cb)(SSL *s, const uint8_t **out, uint8_t *out_len, const uint8_t *in, unsigned in_len, void *arg); void *alpn_select_cb_arg; /* For a client, this contains the list of supported protocols in wire * format. */ uint8_t *alpn_client_proto_list; unsigned alpn_client_proto_list_len; /* SRTP profiles we are willing to do from RFC 5764 */ STACK_OF(SRTP_PROTECTION_PROFILE) *srtp_profiles; /* Supported group values inherited by SSL structure */ size_t supported_group_list_len; uint16_t *supported_group_list; /* The client's Channel ID private key. */ EVP_PKEY *tlsext_channel_id_private; /* keylog_callback, if not NULL, is the key logging callback. See * |SSL_CTX_set_keylog_callback|. */ void (*keylog_callback)(const SSL *ssl, const char *line); /* current_time_cb, if not NULL, is the function to use to get the current * time. It sets |*out_clock| to the current time. See * |SSL_CTX_set_current_time_cb|. */ void (*current_time_cb)(const SSL *ssl, struct timeval *out_clock); /* pool is used for all |CRYPTO_BUFFER|s in case we wish to share certificate * memory. */ CRYPTO_BUFFER_POOL *pool; /* quiet_shutdown is true if the connection should not send a close_notify on * shutdown. */ unsigned quiet_shutdown:1; /* If enable_early_data is non-zero, early data can be sent and accepted over * new connections. */ unsigned enable_early_data:1; /* ocsp_stapling_enabled is only used by client connections and indicates * whether OCSP stapling will be requested. */ unsigned ocsp_stapling_enabled:1; /* If true, a client will request certificate timestamps. */ unsigned signed_cert_timestamps_enabled:1; /* tlsext_channel_id_enabled is one if Channel ID is enabled and zero * otherwise. For a server, means that we'll accept Channel IDs from clients. * For a client, means that we'll advertise support. */ unsigned tlsext_channel_id_enabled:1; /* grease_enabled is one if draft-davidben-tls-grease-01 is enabled and zero * otherwise. */ unsigned grease_enabled:1; /* short_header_enabled is one if a short record header in TLS 1.3 may * be negotiated and zero otherwise. */ unsigned short_header_enabled:1; }; /* Nodejs compatibility section (hidden). * * These defines exist for node.js, with the hope that we can eliminate the * need for them over time. */ #define SSLerr(function, reason) \ ERR_put_error(ERR_LIB_SSL, 0, reason, __FILE__, __LINE__) /* Preprocessor compatibility section (hidden). * * Historically, a number of APIs were implemented in OpenSSL as macros and * constants to 'ctrl' functions. To avoid breaking #ifdefs in consumers, this * section defines a number of legacy macros. * * Although using either the CTRL values or their wrapper macros in #ifdefs is * still supported, the CTRL values may not be passed to |SSL_ctrl| and * |SSL_CTX_ctrl|. Call the functions (previously wrapper macros) instead. * * See PORTING.md in the BoringSSL source tree for a table of corresponding * functions. * https://boringssl.googlesource.com/boringssl/+/master/PORTING.md#Replacements-for-values */ #define DTLS_CTRL_GET_TIMEOUT doesnt_exist #define DTLS_CTRL_HANDLE_TIMEOUT doesnt_exist #define SSL_CTRL_CHAIN doesnt_exist #define SSL_CTRL_CHAIN_CERT doesnt_exist #define SSL_CTRL_CHANNEL_ID doesnt_exist #define SSL_CTRL_CLEAR_EXTRA_CHAIN_CERTS doesnt_exist #define SSL_CTRL_CLEAR_MODE doesnt_exist #define SSL_CTRL_CLEAR_OPTIONS doesnt_exist #define SSL_CTRL_EXTRA_CHAIN_CERT doesnt_exist #define SSL_CTRL_GET_CHAIN_CERTS doesnt_exist #define SSL_CTRL_GET_CHANNEL_ID doesnt_exist #define SSL_CTRL_GET_CLIENT_CERT_TYPES doesnt_exist #define SSL_CTRL_GET_EXTRA_CHAIN_CERTS doesnt_exist #define SSL_CTRL_GET_MAX_CERT_LIST doesnt_exist #define SSL_CTRL_GET_NUM_RENEGOTIATIONS doesnt_exist #define SSL_CTRL_GET_READ_AHEAD doesnt_exist #define SSL_CTRL_GET_RI_SUPPORT doesnt_exist #define SSL_CTRL_GET_SESSION_REUSED doesnt_exist #define SSL_CTRL_GET_SESS_CACHE_MODE doesnt_exist #define SSL_CTRL_GET_SESS_CACHE_SIZE doesnt_exist #define SSL_CTRL_GET_TLSEXT_TICKET_KEYS doesnt_exist #define SSL_CTRL_GET_TOTAL_RENEGOTIATIONS doesnt_exist #define SSL_CTRL_MODE doesnt_exist #define SSL_CTRL_NEED_TMP_RSA doesnt_exist #define SSL_CTRL_OPTIONS doesnt_exist #define SSL_CTRL_SESS_NUMBER doesnt_exist #define SSL_CTRL_SET_CURVES doesnt_exist #define SSL_CTRL_SET_CURVES_LIST doesnt_exist #define SSL_CTRL_SET_MAX_CERT_LIST doesnt_exist #define SSL_CTRL_SET_MAX_SEND_FRAGMENT doesnt_exist #define SSL_CTRL_SET_MSG_CALLBACK doesnt_exist #define SSL_CTRL_SET_MSG_CALLBACK_ARG doesnt_exist #define SSL_CTRL_SET_MTU doesnt_exist #define SSL_CTRL_SET_READ_AHEAD doesnt_exist #define SSL_CTRL_SET_SESS_CACHE_MODE doesnt_exist #define SSL_CTRL_SET_SESS_CACHE_SIZE doesnt_exist #define SSL_CTRL_SET_TLSEXT_HOSTNAME doesnt_exist #define SSL_CTRL_SET_TLSEXT_SERVERNAME_ARG doesnt_exist #define SSL_CTRL_SET_TLSEXT_SERVERNAME_CB doesnt_exist #define SSL_CTRL_SET_TLSEXT_TICKET_KEYS doesnt_exist #define SSL_CTRL_SET_TLSEXT_TICKET_KEY_CB doesnt_exist #define SSL_CTRL_SET_TMP_DH doesnt_exist #define SSL_CTRL_SET_TMP_DH_CB doesnt_exist #define SSL_CTRL_SET_TMP_ECDH doesnt_exist #define SSL_CTRL_SET_TMP_ECDH_CB doesnt_exist #define SSL_CTRL_SET_TMP_RSA doesnt_exist #define SSL_CTRL_SET_TMP_RSA_CB doesnt_exist #define DTLSv1_get_timeout DTLSv1_get_timeout #define DTLSv1_handle_timeout DTLSv1_handle_timeout #define SSL_CTX_add0_chain_cert SSL_CTX_add0_chain_cert #define SSL_CTX_add1_chain_cert SSL_CTX_add1_chain_cert #define SSL_CTX_add_extra_chain_cert SSL_CTX_add_extra_chain_cert #define SSL_CTX_clear_extra_chain_certs SSL_CTX_clear_extra_chain_certs #define SSL_CTX_clear_chain_certs SSL_CTX_clear_chain_certs #define SSL_CTX_clear_mode SSL_CTX_clear_mode #define SSL_CTX_clear_options SSL_CTX_clear_options #define SSL_CTX_get0_chain_certs SSL_CTX_get0_chain_certs #define SSL_CTX_get_extra_chain_certs SSL_CTX_get_extra_chain_certs #define SSL_CTX_get_max_cert_list SSL_CTX_get_max_cert_list #define SSL_CTX_get_mode SSL_CTX_get_mode #define SSL_CTX_get_options SSL_CTX_get_options #define SSL_CTX_get_read_ahead SSL_CTX_get_read_ahead #define SSL_CTX_get_session_cache_mode SSL_CTX_get_session_cache_mode #define SSL_CTX_get_tlsext_ticket_keys SSL_CTX_get_tlsext_ticket_keys #define SSL_CTX_need_tmp_RSA SSL_CTX_need_tmp_RSA #define SSL_CTX_sess_get_cache_size SSL_CTX_sess_get_cache_size #define SSL_CTX_sess_number SSL_CTX_sess_number #define SSL_CTX_sess_set_cache_size SSL_CTX_sess_set_cache_size #define SSL_CTX_set0_chain SSL_CTX_set0_chain #define SSL_CTX_set1_chain SSL_CTX_set1_chain #define SSL_CTX_set1_curves SSL_CTX_set1_curves #define SSL_CTX_set_max_cert_list SSL_CTX_set_max_cert_list #define SSL_CTX_set_max_send_fragment SSL_CTX_set_max_send_fragment #define SSL_CTX_set_mode SSL_CTX_set_mode #define SSL_CTX_set_msg_callback_arg SSL_CTX_set_msg_callback_arg #define SSL_CTX_set_options SSL_CTX_set_options #define SSL_CTX_set_read_ahead SSL_CTX_set_read_ahead #define SSL_CTX_set_session_cache_mode SSL_CTX_set_session_cache_mode #define SSL_CTX_set_tlsext_servername_arg SSL_CTX_set_tlsext_servername_arg #define SSL_CTX_set_tlsext_servername_callback \ SSL_CTX_set_tlsext_servername_callback #define SSL_CTX_set_tlsext_ticket_key_cb SSL_CTX_set_tlsext_ticket_key_cb #define SSL_CTX_set_tlsext_ticket_keys SSL_CTX_set_tlsext_ticket_keys #define SSL_CTX_set_tmp_dh SSL_CTX_set_tmp_dh #define SSL_CTX_set_tmp_ecdh SSL_CTX_set_tmp_ecdh #define SSL_CTX_set_tmp_rsa SSL_CTX_set_tmp_rsa #define SSL_add0_chain_cert SSL_add0_chain_cert #define SSL_add1_chain_cert SSL_add1_chain_cert #define SSL_clear_chain_certs SSL_clear_chain_certs #define SSL_clear_mode SSL_clear_mode #define SSL_clear_options SSL_clear_options #define SSL_get0_certificate_types SSL_get0_certificate_types #define SSL_get0_chain_certs SSL_get0_chain_certs #define SSL_get_max_cert_list SSL_get_max_cert_list #define SSL_get_mode SSL_get_mode #define SSL_get_options SSL_get_options #define SSL_get_secure_renegotiation_support \ SSL_get_secure_renegotiation_support #define SSL_need_tmp_RSA SSL_need_tmp_RSA #define SSL_num_renegotiations SSL_num_renegotiations #define SSL_session_reused SSL_session_reused #define SSL_set0_chain SSL_set0_chain #define SSL_set1_chain SSL_set1_chain #define SSL_set1_curves SSL_set1_curves #define SSL_set_max_cert_list SSL_set_max_cert_list #define SSL_set_max_send_fragment SSL_set_max_send_fragment #define SSL_set_mode SSL_set_mode #define SSL_set_msg_callback_arg SSL_set_msg_callback_arg #define SSL_set_mtu SSL_set_mtu #define SSL_set_options SSL_set_options #define SSL_set_tlsext_host_name SSL_set_tlsext_host_name #define SSL_set_tmp_dh SSL_set_tmp_dh #define SSL_set_tmp_ecdh SSL_set_tmp_ecdh #define SSL_set_tmp_rsa SSL_set_tmp_rsa #define SSL_total_renegotiations SSL_total_renegotiations #if defined(__cplusplus) } /* extern C */ extern "C++" { namespace bssl { BORINGSSL_MAKE_DELETER(SSL, SSL_free) BORINGSSL_MAKE_DELETER(SSL_CTX, SSL_CTX_free) BORINGSSL_MAKE_DELETER(SSL_SESSION, SSL_SESSION_free) } // namespace bssl } /* extern C++ */ #endif #define SSL_R_APP_DATA_IN_HANDSHAKE 100 #define SSL_R_ATTEMPT_TO_REUSE_SESSION_IN_DIFFERENT_CONTEXT 101 #define SSL_R_BAD_ALERT 102 #define SSL_R_BAD_CHANGE_CIPHER_SPEC 103 #define SSL_R_BAD_DATA_RETURNED_BY_CALLBACK 104 #define SSL_R_BAD_DH_P_LENGTH 105 #define SSL_R_BAD_DIGEST_LENGTH 106 #define SSL_R_BAD_ECC_CERT 107 #define SSL_R_BAD_ECPOINT 108 #define SSL_R_BAD_HANDSHAKE_RECORD 109 #define SSL_R_BAD_HELLO_REQUEST 110 #define SSL_R_BAD_LENGTH 111 #define SSL_R_BAD_PACKET_LENGTH 112 #define SSL_R_BAD_RSA_ENCRYPT 113 #define SSL_R_BAD_SIGNATURE 114 #define SSL_R_BAD_SRTP_MKI_VALUE 115 #define SSL_R_BAD_SRTP_PROTECTION_PROFILE_LIST 116 #define SSL_R_BAD_SSL_FILETYPE 117 #define SSL_R_BAD_WRITE_RETRY 118 #define SSL_R_BIO_NOT_SET 119 #define SSL_R_BN_LIB 120 #define SSL_R_BUFFER_TOO_SMALL 121 #define SSL_R_CA_DN_LENGTH_MISMATCH 122 #define SSL_R_CA_DN_TOO_LONG 123 #define SSL_R_CCS_RECEIVED_EARLY 124 #define SSL_R_CERTIFICATE_VERIFY_FAILED 125 #define SSL_R_CERT_CB_ERROR 126 #define SSL_R_CERT_LENGTH_MISMATCH 127 #define SSL_R_CHANNEL_ID_NOT_P256 128 #define SSL_R_CHANNEL_ID_SIGNATURE_INVALID 129 #define SSL_R_CIPHER_OR_HASH_UNAVAILABLE 130 #define SSL_R_CLIENTHELLO_PARSE_FAILED 131 #define SSL_R_CLIENTHELLO_TLSEXT 132 #define SSL_R_CONNECTION_REJECTED 133 #define SSL_R_CONNECTION_TYPE_NOT_SET 134 #define SSL_R_CUSTOM_EXTENSION_ERROR 135 #define SSL_R_DATA_LENGTH_TOO_LONG 136 #define SSL_R_DECODE_ERROR 137 #define SSL_R_DECRYPTION_FAILED 138 #define SSL_R_DECRYPTION_FAILED_OR_BAD_RECORD_MAC 139 #define SSL_R_DH_PUBLIC_VALUE_LENGTH_IS_WRONG 140 #define SSL_R_DH_P_TOO_LONG 141 #define SSL_R_DIGEST_CHECK_FAILED 142 #define SSL_R_DTLS_MESSAGE_TOO_BIG 143 #define SSL_R_ECC_CERT_NOT_FOR_SIGNING 144 #define SSL_R_EMS_STATE_INCONSISTENT 145 #define SSL_R_ENCRYPTED_LENGTH_TOO_LONG 146 #define SSL_R_ERROR_ADDING_EXTENSION 147 #define SSL_R_ERROR_IN_RECEIVED_CIPHER_LIST 148 #define SSL_R_ERROR_PARSING_EXTENSION 149 #define SSL_R_EXCESSIVE_MESSAGE_SIZE 150 #define SSL_R_EXTRA_DATA_IN_MESSAGE 151 #define SSL_R_FRAGMENT_MISMATCH 152 #define SSL_R_GOT_NEXT_PROTO_WITHOUT_EXTENSION 153 #define SSL_R_HANDSHAKE_FAILURE_ON_CLIENT_HELLO 154 #define SSL_R_HTTPS_PROXY_REQUEST 155 #define SSL_R_HTTP_REQUEST 156 #define SSL_R_INAPPROPRIATE_FALLBACK 157 #define SSL_R_INVALID_COMMAND 158 #define SSL_R_INVALID_MESSAGE 159 #define SSL_R_INVALID_SSL_SESSION 160 #define SSL_R_INVALID_TICKET_KEYS_LENGTH 161 #define SSL_R_LENGTH_MISMATCH 162 #define SSL_R_LIBRARY_HAS_NO_CIPHERS 163 #define SSL_R_MISSING_EXTENSION 164 #define SSL_R_MISSING_RSA_CERTIFICATE 165 #define SSL_R_MISSING_TMP_DH_KEY 166 #define SSL_R_MISSING_TMP_ECDH_KEY 167 #define SSL_R_MIXED_SPECIAL_OPERATOR_WITH_GROUPS 168 #define SSL_R_MTU_TOO_SMALL 169 #define SSL_R_NEGOTIATED_BOTH_NPN_AND_ALPN 170 #define SSL_R_NESTED_GROUP 171 #define SSL_R_NO_CERTIFICATES_RETURNED 172 #define SSL_R_NO_CERTIFICATE_ASSIGNED 173 #define SSL_R_NO_CERTIFICATE_SET 174 #define SSL_R_NO_CIPHERS_AVAILABLE 175 #define SSL_R_NO_CIPHERS_PASSED 176 #define SSL_R_NO_CIPHER_MATCH 177 #define SSL_R_NO_COMPRESSION_SPECIFIED 178 #define SSL_R_NO_METHOD_SPECIFIED 179 #define SSL_R_NO_P256_SUPPORT 180 #define SSL_R_NO_PRIVATE_KEY_ASSIGNED 181 #define SSL_R_NO_RENEGOTIATION 182 #define SSL_R_NO_REQUIRED_DIGEST 183 #define SSL_R_NO_SHARED_CIPHER 184 #define SSL_R_NULL_SSL_CTX 185 #define SSL_R_NULL_SSL_METHOD_PASSED 186 #define SSL_R_OLD_SESSION_CIPHER_NOT_RETURNED 187 #define SSL_R_OLD_SESSION_VERSION_NOT_RETURNED 188 #define SSL_R_OUTPUT_ALIASES_INPUT 189 #define SSL_R_PARSE_TLSEXT 190 #define SSL_R_PATH_TOO_LONG 191 #define SSL_R_PEER_DID_NOT_RETURN_A_CERTIFICATE 192 #define SSL_R_PEER_ERROR_UNSUPPORTED_CERTIFICATE_TYPE 193 #define SSL_R_PROTOCOL_IS_SHUTDOWN 194 #define SSL_R_PSK_IDENTITY_NOT_FOUND 195 #define SSL_R_PSK_NO_CLIENT_CB 196 #define SSL_R_PSK_NO_SERVER_CB 197 #define SSL_R_READ_TIMEOUT_EXPIRED 198 #define SSL_R_RECORD_LENGTH_MISMATCH 199 #define SSL_R_RECORD_TOO_LARGE 200 #define SSL_R_RENEGOTIATION_ENCODING_ERR 201 #define SSL_R_RENEGOTIATION_MISMATCH 202 #define SSL_R_REQUIRED_CIPHER_MISSING 203 #define SSL_R_RESUMED_EMS_SESSION_WITHOUT_EMS_EXTENSION 204 #define SSL_R_RESUMED_NON_EMS_SESSION_WITH_EMS_EXTENSION 205 #define SSL_R_SCSV_RECEIVED_WHEN_RENEGOTIATING 206 #define SSL_R_SERVERHELLO_TLSEXT 207 #define SSL_R_SESSION_ID_CONTEXT_UNINITIALIZED 208 #define SSL_R_SESSION_MAY_NOT_BE_CREATED 209 #define SSL_R_SIGNATURE_ALGORITHMS_EXTENSION_SENT_BY_SERVER 210 #define SSL_R_SRTP_COULD_NOT_ALLOCATE_PROFILES 211 #define SSL_R_SRTP_UNKNOWN_PROTECTION_PROFILE 212 #define SSL_R_SSL3_EXT_INVALID_SERVERNAME 213 #define SSL_R_SSL_CTX_HAS_NO_DEFAULT_SSL_VERSION 214 #define SSL_R_SSL_HANDSHAKE_FAILURE 215 #define SSL_R_SSL_SESSION_ID_CONTEXT_TOO_LONG 216 #define SSL_R_TLS_PEER_DID_NOT_RESPOND_WITH_CERTIFICATE_LIST 217 #define SSL_R_TLS_RSA_ENCRYPTED_VALUE_LENGTH_IS_WRONG 218 #define SSL_R_TOO_MANY_EMPTY_FRAGMENTS 219 #define SSL_R_TOO_MANY_WARNING_ALERTS 220 #define SSL_R_UNABLE_TO_FIND_ECDH_PARAMETERS 221 #define SSL_R_UNEXPECTED_EXTENSION 222 #define SSL_R_UNEXPECTED_MESSAGE 223 #define SSL_R_UNEXPECTED_OPERATOR_IN_GROUP 224 #define SSL_R_UNEXPECTED_RECORD 225 #define SSL_R_UNINITIALIZED 226 #define SSL_R_UNKNOWN_ALERT_TYPE 227 #define SSL_R_UNKNOWN_CERTIFICATE_TYPE 228 #define SSL_R_UNKNOWN_CIPHER_RETURNED 229 #define SSL_R_UNKNOWN_CIPHER_TYPE 230 #define SSL_R_UNKNOWN_DIGEST 231 #define SSL_R_UNKNOWN_KEY_EXCHANGE_TYPE 232 #define SSL_R_UNKNOWN_PROTOCOL 233 #define SSL_R_UNKNOWN_SSL_VERSION 234 #define SSL_R_UNKNOWN_STATE 235 #define SSL_R_UNSAFE_LEGACY_RENEGOTIATION_DISABLED 236 #define SSL_R_UNSUPPORTED_CIPHER 237 #define SSL_R_UNSUPPORTED_COMPRESSION_ALGORITHM 238 #define SSL_R_UNSUPPORTED_ELLIPTIC_CURVE 239 #define SSL_R_UNSUPPORTED_PROTOCOL 240 #define SSL_R_WRONG_CERTIFICATE_TYPE 241 #define SSL_R_WRONG_CIPHER_RETURNED 242 #define SSL_R_WRONG_CURVE 243 #define SSL_R_WRONG_MESSAGE_TYPE 244 #define SSL_R_WRONG_SIGNATURE_TYPE 245 #define SSL_R_WRONG_SSL_VERSION 246 #define SSL_R_WRONG_VERSION_NUMBER 247 #define SSL_R_X509_LIB 248 #define SSL_R_X509_VERIFICATION_SETUP_PROBLEMS 249 #define SSL_R_SHUTDOWN_WHILE_IN_INIT 250 #define SSL_R_INVALID_OUTER_RECORD_TYPE 251 #define SSL_R_UNSUPPORTED_PROTOCOL_FOR_CUSTOM_KEY 252 #define SSL_R_NO_COMMON_SIGNATURE_ALGORITHMS 253 #define SSL_R_DOWNGRADE_DETECTED 254 #define SSL_R_BUFFERED_MESSAGES_ON_CIPHER_CHANGE 255 #define SSL_R_INVALID_COMPRESSION_LIST 256 #define SSL_R_DUPLICATE_EXTENSION 257 #define SSL_R_MISSING_KEY_SHARE 258 #define SSL_R_INVALID_ALPN_PROTOCOL 259 #define SSL_R_TOO_MANY_KEY_UPDATES 260 #define SSL_R_BLOCK_CIPHER_PAD_IS_WRONG 261 #define SSL_R_NO_CIPHERS_SPECIFIED 262 #define SSL_R_RENEGOTIATION_EMS_MISMATCH 263 #define SSL_R_DUPLICATE_KEY_SHARE 264 #define SSL_R_NO_GROUPS_SPECIFIED 265 #define SSL_R_NO_SHARED_GROUP 266 #define SSL_R_PRE_SHARED_KEY_MUST_BE_LAST 267 #define SSL_R_OLD_SESSION_PRF_HASH_MISMATCH 268 #define SSL_R_INVALID_SCT_LIST 269 #define SSL_R_TOO_MUCH_SKIPPED_EARLY_DATA 270 #define SSL_R_PSK_IDENTITY_BINDER_COUNT_MISMATCH 271 #define SSL_R_CANNOT_PARSE_LEAF_CERT 272 #define SSL_R_SSLV3_ALERT_CLOSE_NOTIFY 1000 #define SSL_R_SSLV3_ALERT_UNEXPECTED_MESSAGE 1010 #define SSL_R_SSLV3_ALERT_BAD_RECORD_MAC 1020 #define SSL_R_TLSV1_ALERT_DECRYPTION_FAILED 1021 #define SSL_R_TLSV1_ALERT_RECORD_OVERFLOW 1022 #define SSL_R_SSLV3_ALERT_DECOMPRESSION_FAILURE 1030 #define SSL_R_SSLV3_ALERT_HANDSHAKE_FAILURE 1040 #define SSL_R_SSLV3_ALERT_NO_CERTIFICATE 1041 #define SSL_R_SSLV3_ALERT_BAD_CERTIFICATE 1042 #define SSL_R_SSLV3_ALERT_UNSUPPORTED_CERTIFICATE 1043 #define SSL_R_SSLV3_ALERT_CERTIFICATE_REVOKED 1044 #define SSL_R_SSLV3_ALERT_CERTIFICATE_EXPIRED 1045 #define SSL_R_SSLV3_ALERT_CERTIFICATE_UNKNOWN 1046 #define SSL_R_SSLV3_ALERT_ILLEGAL_PARAMETER 1047 #define SSL_R_TLSV1_ALERT_UNKNOWN_CA 1048 #define SSL_R_TLSV1_ALERT_ACCESS_DENIED 1049 #define SSL_R_TLSV1_ALERT_DECODE_ERROR 1050 #define SSL_R_TLSV1_ALERT_DECRYPT_ERROR 1051 #define SSL_R_TLSV1_ALERT_EXPORT_RESTRICTION 1060 #define SSL_R_TLSV1_ALERT_PROTOCOL_VERSION 1070 #define SSL_R_TLSV1_ALERT_INSUFFICIENT_SECURITY 1071 #define SSL_R_TLSV1_ALERT_INTERNAL_ERROR 1080 #define SSL_R_TLSV1_ALERT_INAPPROPRIATE_FALLBACK 1086 #define SSL_R_TLSV1_ALERT_USER_CANCELLED 1090 #define SSL_R_TLSV1_ALERT_NO_RENEGOTIATION 1100 #define SSL_R_TLSV1_UNSUPPORTED_EXTENSION 1110 #define SSL_R_TLSV1_CERTIFICATE_UNOBTAINABLE 1111 #define SSL_R_TLSV1_UNRECOGNIZED_NAME 1112 #define SSL_R_TLSV1_BAD_CERTIFICATE_STATUS_RESPONSE 1113 #define SSL_R_TLSV1_BAD_CERTIFICATE_HASH_VALUE 1114 #define SSL_R_TLSV1_UNKNOWN_PSK_IDENTITY 1115 #define SSL_R_TLSV1_CERTIFICATE_REQUIRED 1116 #endif /* OPENSSL_HEADER_SSL_H */