GroundHeatTransfer:Control,
    Control1,                !- Name
    yes,                      !- Run Basement Preprocessor
    no;                     !- Run Slab Preprocessor

!---------------------------------------------------------------

 GroundHeatTransfer:Basement:SimParameters,
    0.1,                    ! [F: Multiplier for the ADI solution: 0<F<1.0,
                            ! typically 0.1 (0.5 for high k
    1;                      ! [IYRS: Maximum number of iterations: typically 25-30

 GroundHeatTransfer:Basement:MatlProps,
    6,                                                  ! [NMAT: Number of materials in this domain, UP TO 6]
    2242.6, 2242.6, 311.66, 1500.0, 2000.0, 448.5,      ! [RHO(1-6): Matl density
                                                        !(Fndn wall, Floor Slab, Ceiling,Soil, Gravel, Wood), kg/m3, ]
    880.0, 880.0, 1513.0, 840.0, 720.0, 1630.0,         ! [CP(1-6): Specific Heat: J/kg-K,
    1.402, 1.402, 0.093, 1, 1.9, 0.119;               ! [TCON(1-6): Conductivity: W/m-K

 GroundHeatTransfer:Basement:Insulation,
    5.0,                    ! [REXT: R Value of any exterior insulation, K/(W/m2)]
    TRUE;                   ! [INSFULL: Flag: Is the wall fully insulated? TRUE/FALSE]

 GroundHeatTransfer:Basement:SurfaceProps,
    .16, .40,               ! [ALBEDO: Surface albedo array, .16 .40]
    .94, .86,               ! [EPSLN: Surface emissivity No Snow/ Snow .94 .86]
    6.0, 0.25,              ! [VEGHT: Surface roughness NS/S, cm, 6.0, 0.25]
    TRUE;                   ! [PET: Flag, Potential evapotranspiration on? T/F]
                            ! Typically, PET is True

 GroundHeatTransfer:Basement:BldgData,
    .2,                     ! [DWALL: Wall thickness, m, .2]
    .2,                     ! [DSLAB: Floor slab thickness, m, 0.1]
    .3,                     ! [DGRAVXY: Width of gravel pit beside footing, m, 0.3]
    .2,                     ! [DGRAVZN: Gravel depth above the floor slab, m, 0.2]
    .1;                     ! [DGRAVZP: Gravel depth below the floor slab, m, 0.1]

 GroundHeatTransfer:Basement:Interior,
    TRUE,                   ! [COND: Flag: Is the basement conditioned? TRUE/FALSE]
                            ! [HIN: Indoor convective heat transfer coefficients, W/m2-K
                            ! Convection Only: 1)Q Downward 2)Q Upward 3)Q Horizontal
                            ! Conv and Radiation: 4)Q Downward 5)Q Upward 6)Q Horizontal]
    0.92,                   !Q Downward Convection Only
    4.04,                   !Q Upward Convection Only
    3.08,                   !Q HorizontalConvection Only
    6.13,                   !Q Downward Conv and Radiation
    9.26,                   !Q Upward Conv and Radiation
    8.29;                   !Q Horizontal Conv and Radiation

 GroundHeatTransfer:Basement:ComBldg,                   ! Commercial building
    22.,                    ! Jan Ave basement temp
    22.,                    ! Feb Ave basement temp
    22.,                    ! Mar Ave basement temp
    22.,                    ! Apr Ave basement temp
    22.,                    ! May Ave basement temp
    22.,                    ! Jun Ave basement temp
    22.,                    ! Jul Ave basement temp
    22.,                    ! Aug Ave basement temp
    22.,                    ! Sep Ave basement temp
    22.,                    ! Oct Ave basement temp
    22.,                    ! Nov Ave basement temp
    22.,                    ! Dec Ave basement temp
    0.0;                    ! Daily variation Sine Wave amplitude

 GroundHeatTransfer:Basement:EquivSlab,
    15.0,                   ! [APRatio: The area to perimeter ratio for this slab: m]
                            !
    TRUE;                   ! [EquivSizing: Flag: Will the dimensions of an equivalent
                            ! slab be calculated (TRUE) or will the dimensions be
                            ! input directly? (FALSE)]
                            ! Only advanced special simulations should use FALSE.

 GroundHeatTransfer:Basement:EquivAutoGrid, ! NOTE: EquivAutoGrid necessary when EquivSizing=TRUE
                            ! This is the normal case.
                            ! If the modelled building is not a rectangle or square, Equivalent
                            ! sizing MUST be used to get accurate results
                            !
    15,                     ![CLEARANCE: Distance from outside of wall to edge, 15m]
    .2,                     ! [SlabDepth: Thickness of the floor slab, m, 0.1]
    2.4;                    ! [BaseDepth: Depth of the basement wall below grade, m]