# Copyright 2020 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

require 'date'
require 'google/apis/core/base_service'
require 'google/apis/core/json_representation'
require 'google/apis/core/hashable'
require 'google/apis/errors'

module Google
  module Apis
    module TranscoderV1
      
      # Ad break.
      class AdBreak
        include Google::Apis::Core::Hashable
      
        # Start time in seconds for the ad break, relative to the output file timeline.
        # The default is `0s`.
        # Corresponds to the JSON property `startTimeOffset`
        # @return [String]
        attr_accessor :start_time_offset
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @start_time_offset = args[:start_time_offset] if args.key?(:start_time_offset)
        end
      end
      
      # Configuration for AES-128 encryption.
      class Aes128Encryption
        include Google::Apis::Core::Hashable
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
        end
      end
      
      # Animation types.
      class Animation
        include Google::Apis::Core::Hashable
      
        # End previous overlay animation from the video. Without `AnimationEnd`, the
        # overlay object will keep the state of previous animation until the end of the
        # video.
        # Corresponds to the JSON property `animationEnd`
        # @return [Google::Apis::TranscoderV1::AnimationEnd]
        attr_accessor :animation_end
      
        # Display overlay object with fade animation.
        # Corresponds to the JSON property `animationFade`
        # @return [Google::Apis::TranscoderV1::AnimationFade]
        attr_accessor :animation_fade
      
        # Display static overlay object.
        # Corresponds to the JSON property `animationStatic`
        # @return [Google::Apis::TranscoderV1::AnimationStatic]
        attr_accessor :animation_static
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @animation_end = args[:animation_end] if args.key?(:animation_end)
          @animation_fade = args[:animation_fade] if args.key?(:animation_fade)
          @animation_static = args[:animation_static] if args.key?(:animation_static)
        end
      end
      
      # End previous overlay animation from the video. Without `AnimationEnd`, the
      # overlay object will keep the state of previous animation until the end of the
      # video.
      class AnimationEnd
        include Google::Apis::Core::Hashable
      
        # The time to end overlay object, in seconds. Default: 0
        # Corresponds to the JSON property `startTimeOffset`
        # @return [String]
        attr_accessor :start_time_offset
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @start_time_offset = args[:start_time_offset] if args.key?(:start_time_offset)
        end
      end
      
      # Display overlay object with fade animation.
      class AnimationFade
        include Google::Apis::Core::Hashable
      
        # The time to end the fade animation, in seconds. Default: `start_time_offset` +
        # 1s
        # Corresponds to the JSON property `endTimeOffset`
        # @return [String]
        attr_accessor :end_time_offset
      
        # Required. Type of fade animation: `FADE_IN` or `FADE_OUT`.
        # Corresponds to the JSON property `fadeType`
        # @return [String]
        attr_accessor :fade_type
      
        # The time to start the fade animation, in seconds. Default: 0
        # Corresponds to the JSON property `startTimeOffset`
        # @return [String]
        attr_accessor :start_time_offset
      
        # 2D normalized coordinates. Default: ``0.0, 0.0``
        # Corresponds to the JSON property `xy`
        # @return [Google::Apis::TranscoderV1::NormalizedCoordinate]
        attr_accessor :xy
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @end_time_offset = args[:end_time_offset] if args.key?(:end_time_offset)
          @fade_type = args[:fade_type] if args.key?(:fade_type)
          @start_time_offset = args[:start_time_offset] if args.key?(:start_time_offset)
          @xy = args[:xy] if args.key?(:xy)
        end
      end
      
      # Display static overlay object.
      class AnimationStatic
        include Google::Apis::Core::Hashable
      
        # The time to start displaying the overlay object, in seconds. Default: 0
        # Corresponds to the JSON property `startTimeOffset`
        # @return [String]
        attr_accessor :start_time_offset
      
        # 2D normalized coordinates. Default: ``0.0, 0.0``
        # Corresponds to the JSON property `xy`
        # @return [Google::Apis::TranscoderV1::NormalizedCoordinate]
        attr_accessor :xy
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @start_time_offset = args[:start_time_offset] if args.key?(:start_time_offset)
          @xy = args[:xy] if args.key?(:xy)
        end
      end
      
      # Audio preprocessing configuration.
      class Audio
        include Google::Apis::Core::Hashable
      
        # Enable boosting high frequency components. The default is `false`. **Note:**
        # This field is not supported.
        # Corresponds to the JSON property `highBoost`
        # @return [Boolean]
        attr_accessor :high_boost
        alias_method :high_boost?, :high_boost
      
        # Enable boosting low frequency components. The default is `false`. **Note:**
        # This field is not supported.
        # Corresponds to the JSON property `lowBoost`
        # @return [Boolean]
        attr_accessor :low_boost
        alias_method :low_boost?, :low_boost
      
        # Specify audio loudness normalization in loudness units relative to full scale (
        # LUFS). Enter a value between -24 and 0 (the default), where: * -24 is the
        # Advanced Television Systems Committee (ATSC A/85) standard * -23 is the EU
        # R128 broadcast standard * -19 is the prior standard for online mono audio * -
        # 18 is the ReplayGain standard * -16 is the prior standard for stereo audio * -
        # 14 is the new online audio standard recommended by Spotify, as well as Amazon
        # Echo * 0 disables normalization
        # Corresponds to the JSON property `lufs`
        # @return [Float]
        attr_accessor :lufs
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @high_boost = args[:high_boost] if args.key?(:high_boost)
          @low_boost = args[:low_boost] if args.key?(:low_boost)
          @lufs = args[:lufs] if args.key?(:lufs)
        end
      end
      
      # The mapping for the JobConfig.edit_list atoms with audio EditAtom.inputs.
      class AudioMapping
        include Google::Apis::Core::Hashable
      
        # Required. The EditAtom.key that references the atom with audio inputs in the
        # JobConfig.edit_list.
        # Corresponds to the JSON property `atomKey`
        # @return [String]
        attr_accessor :atom_key
      
        # Audio volume control in dB. Negative values decrease volume, positive values
        # increase. The default is 0.
        # Corresponds to the JSON property `gainDb`
        # @return [Float]
        attr_accessor :gain_db
      
        # Required. The zero-based index of the channel in the input audio stream.
        # Corresponds to the JSON property `inputChannel`
        # @return [Fixnum]
        attr_accessor :input_channel
      
        # Required. The Input.key that identifies the input file.
        # Corresponds to the JSON property `inputKey`
        # @return [String]
        attr_accessor :input_key
      
        # Required. The zero-based index of the track in the input file.
        # Corresponds to the JSON property `inputTrack`
        # @return [Fixnum]
        attr_accessor :input_track
      
        # Required. The zero-based index of the channel in the output audio stream.
        # Corresponds to the JSON property `outputChannel`
        # @return [Fixnum]
        attr_accessor :output_channel
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @atom_key = args[:atom_key] if args.key?(:atom_key)
          @gain_db = args[:gain_db] if args.key?(:gain_db)
          @input_channel = args[:input_channel] if args.key?(:input_channel)
          @input_key = args[:input_key] if args.key?(:input_key)
          @input_track = args[:input_track] if args.key?(:input_track)
          @output_channel = args[:output_channel] if args.key?(:output_channel)
        end
      end
      
      # Audio stream resource.
      class AudioStream
        include Google::Apis::Core::Hashable
      
        # Required. Audio bitrate in bits per second. Must be between 1 and 10,000,000.
        # Corresponds to the JSON property `bitrateBps`
        # @return [Fixnum]
        attr_accessor :bitrate_bps
      
        # Number of audio channels. Must be between 1 and 6. The default is 2.
        # Corresponds to the JSON property `channelCount`
        # @return [Fixnum]
        attr_accessor :channel_count
      
        # A list of channel names specifying layout of the audio channels. This only
        # affects the metadata embedded in the container headers, if supported by the
        # specified format. The default is `["fl", "fr"]`. Supported channel names: - `
        # fl` - Front left channel - `fr` - Front right channel - `sl` - Side left
        # channel - `sr` - Side right channel - `fc` - Front center channel - `lfe` -
        # Low frequency
        # Corresponds to the JSON property `channelLayout`
        # @return [Array<String>]
        attr_accessor :channel_layout
      
        # The codec for this audio stream. The default is `aac`. Supported audio codecs:
        # - `aac` - `aac-he` - `aac-he-v2` - `mp3` - `ac3` - `eac3`
        # Corresponds to the JSON property `codec`
        # @return [String]
        attr_accessor :codec
      
        # The name for this particular audio stream that will be added to the HLS/DASH
        # manifest. Not supported in MP4 files.
        # Corresponds to the JSON property `displayName`
        # @return [String]
        attr_accessor :display_name
      
        # The BCP-47 language code, such as `en-US` or `sr-Latn`. For more information,
        # see https://www.unicode.org/reports/tr35/#Unicode_locale_identifier. Not
        # supported in MP4 files.
        # Corresponds to the JSON property `languageCode`
        # @return [String]
        attr_accessor :language_code
      
        # The mapping for the JobConfig.edit_list atoms with audio EditAtom.inputs.
        # Corresponds to the JSON property `mapping`
        # @return [Array<Google::Apis::TranscoderV1::AudioMapping>]
        attr_accessor :mapping
      
        # The audio sample rate in Hertz. The default is 48000 Hertz.
        # Corresponds to the JSON property `sampleRateHertz`
        # @return [Fixnum]
        attr_accessor :sample_rate_hertz
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @bitrate_bps = args[:bitrate_bps] if args.key?(:bitrate_bps)
          @channel_count = args[:channel_count] if args.key?(:channel_count)
          @channel_layout = args[:channel_layout] if args.key?(:channel_layout)
          @codec = args[:codec] if args.key?(:codec)
          @display_name = args[:display_name] if args.key?(:display_name)
          @language_code = args[:language_code] if args.key?(:language_code)
          @mapping = args[:mapping] if args.key?(:mapping)
          @sample_rate_hertz = args[:sample_rate_hertz] if args.key?(:sample_rate_hertz)
        end
      end
      
      # Bob Weaver Deinterlacing Filter Configuration.
      class BwdifConfig
        include Google::Apis::Core::Hashable
      
        # Deinterlace all frames rather than just the frames identified as interlaced.
        # The default is `false`.
        # Corresponds to the JSON property `deinterlaceAllFrames`
        # @return [Boolean]
        attr_accessor :deinterlace_all_frames
        alias_method :deinterlace_all_frames?, :deinterlace_all_frames
      
        # Specifies the deinterlacing mode to adopt. The default is `send_frame`.
        # Supported values: - `send_frame`: Output one frame for each frame - `
        # send_field`: Output one frame for each field
        # Corresponds to the JSON property `mode`
        # @return [String]
        attr_accessor :mode
      
        # The picture field parity assumed for the input interlaced video. The default
        # is `auto`. Supported values: - `tff`: Assume the top field is first - `bff`:
        # Assume the bottom field is first - `auto`: Enable automatic detection of field
        # parity
        # Corresponds to the JSON property `parity`
        # @return [String]
        attr_accessor :parity
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @deinterlace_all_frames = args[:deinterlace_all_frames] if args.key?(:deinterlace_all_frames)
          @mode = args[:mode] if args.key?(:mode)
          @parity = args[:parity] if args.key?(:parity)
        end
      end
      
      # Clearkey configuration.
      class Clearkey
        include Google::Apis::Core::Hashable
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
        end
      end
      
      # Color preprocessing configuration. **Note:** This configuration is not
      # supported.
      class Color
        include Google::Apis::Core::Hashable
      
        # Control brightness of the video. Enter a value between -1 and 1, where -1 is
        # minimum brightness and 1 is maximum brightness. 0 is no change. The default is
        # 0.
        # Corresponds to the JSON property `brightness`
        # @return [Float]
        attr_accessor :brightness
      
        # Control black and white contrast of the video. Enter a value between -1 and 1,
        # where -1 is minimum contrast and 1 is maximum contrast. 0 is no change. The
        # default is 0.
        # Corresponds to the JSON property `contrast`
        # @return [Float]
        attr_accessor :contrast
      
        # Control color saturation of the video. Enter a value between -1 and 1, where -
        # 1 is fully desaturated and 1 is maximum saturation. 0 is no change. The
        # default is 0.
        # Corresponds to the JSON property `saturation`
        # @return [Float]
        attr_accessor :saturation
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @brightness = args[:brightness] if args.key?(:brightness)
          @contrast = args[:contrast] if args.key?(:contrast)
          @saturation = args[:saturation] if args.key?(:saturation)
        end
      end
      
      # Video cropping configuration for the input video. The cropped input video is
      # scaled to match the output resolution.
      class Crop
        include Google::Apis::Core::Hashable
      
        # The number of pixels to crop from the bottom. The default is 0.
        # Corresponds to the JSON property `bottomPixels`
        # @return [Fixnum]
        attr_accessor :bottom_pixels
      
        # The number of pixels to crop from the left. The default is 0.
        # Corresponds to the JSON property `leftPixels`
        # @return [Fixnum]
        attr_accessor :left_pixels
      
        # The number of pixels to crop from the right. The default is 0.
        # Corresponds to the JSON property `rightPixels`
        # @return [Fixnum]
        attr_accessor :right_pixels
      
        # The number of pixels to crop from the top. The default is 0.
        # Corresponds to the JSON property `topPixels`
        # @return [Fixnum]
        attr_accessor :top_pixels
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @bottom_pixels = args[:bottom_pixels] if args.key?(:bottom_pixels)
          @left_pixels = args[:left_pixels] if args.key?(:left_pixels)
          @right_pixels = args[:right_pixels] if args.key?(:right_pixels)
          @top_pixels = args[:top_pixels] if args.key?(:top_pixels)
        end
      end
      
      # `DASH` manifest configuration.
      class DashConfig
        include Google::Apis::Core::Hashable
      
        # The segment reference scheme for a `DASH` manifest. The default is `
        # SEGMENT_LIST`.
        # Corresponds to the JSON property `segmentReferenceScheme`
        # @return [String]
        attr_accessor :segment_reference_scheme
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @segment_reference_scheme = args[:segment_reference_scheme] if args.key?(:segment_reference_scheme)
        end
      end
      
      # Deblock preprocessing configuration. **Note:** This configuration is not
      # supported.
      class Deblock
        include Google::Apis::Core::Hashable
      
        # Enable deblocker. The default is `false`.
        # Corresponds to the JSON property `enabled`
        # @return [Boolean]
        attr_accessor :enabled
        alias_method :enabled?, :enabled
      
        # Set strength of the deblocker. Enter a value between 0 and 1. The higher the
        # value, the stronger the block removal. 0 is no deblocking. The default is 0.
        # Corresponds to the JSON property `strength`
        # @return [Float]
        attr_accessor :strength
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @enabled = args[:enabled] if args.key?(:enabled)
          @strength = args[:strength] if args.key?(:strength)
        end
      end
      
      # Deinterlace configuration for input video.
      class Deinterlace
        include Google::Apis::Core::Hashable
      
        # Bob Weaver Deinterlacing Filter Configuration.
        # Corresponds to the JSON property `bwdif`
        # @return [Google::Apis::TranscoderV1::BwdifConfig]
        attr_accessor :bwdif
      
        # Yet Another Deinterlacing Filter Configuration.
        # Corresponds to the JSON property `yadif`
        # @return [Google::Apis::TranscoderV1::YadifConfig]
        attr_accessor :yadif
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @bwdif = args[:bwdif] if args.key?(:bwdif)
          @yadif = args[:yadif] if args.key?(:yadif)
        end
      end
      
      # Denoise preprocessing configuration. **Note:** This configuration is not
      # supported.
      class Denoise
        include Google::Apis::Core::Hashable
      
        # Set strength of the denoise. Enter a value between 0 and 1. The higher the
        # value, the smoother the image. 0 is no denoising. The default is 0.
        # Corresponds to the JSON property `strength`
        # @return [Float]
        attr_accessor :strength
      
        # Set the denoiser mode. The default is `standard`. Supported denoiser modes: - `
        # standard` - `grain`
        # Corresponds to the JSON property `tune`
        # @return [String]
        attr_accessor :tune
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @strength = args[:strength] if args.key?(:strength)
          @tune = args[:tune] if args.key?(:tune)
        end
      end
      
      # Defines configuration for DRM systems in use.
      class DrmSystems
        include Google::Apis::Core::Hashable
      
        # Clearkey configuration.
        # Corresponds to the JSON property `clearkey`
        # @return [Google::Apis::TranscoderV1::Clearkey]
        attr_accessor :clearkey
      
        # Fairplay configuration.
        # Corresponds to the JSON property `fairplay`
        # @return [Google::Apis::TranscoderV1::Fairplay]
        attr_accessor :fairplay
      
        # Playready configuration.
        # Corresponds to the JSON property `playready`
        # @return [Google::Apis::TranscoderV1::Playready]
        attr_accessor :playready
      
        # Widevine configuration.
        # Corresponds to the JSON property `widevine`
        # @return [Google::Apis::TranscoderV1::Widevine]
        attr_accessor :widevine
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @clearkey = args[:clearkey] if args.key?(:clearkey)
          @fairplay = args[:fairplay] if args.key?(:fairplay)
          @playready = args[:playready] if args.key?(:playready)
          @widevine = args[:widevine] if args.key?(:widevine)
        end
      end
      
      # Edit atom.
      class EditAtom
        include Google::Apis::Core::Hashable
      
        # End time in seconds for the atom, relative to the input file timeline. When `
        # end_time_offset` is not specified, the `inputs` are used until the end of the
        # atom.
        # Corresponds to the JSON property `endTimeOffset`
        # @return [String]
        attr_accessor :end_time_offset
      
        # List of Input.key values identifying files that should be used in this atom.
        # The listed `inputs` must have the same timeline.
        # Corresponds to the JSON property `inputs`
        # @return [Array<String>]
        attr_accessor :inputs
      
        # A unique key for this atom. Must be specified when using advanced mapping.
        # Corresponds to the JSON property `key`
        # @return [String]
        attr_accessor :key
      
        # Start time in seconds for the atom, relative to the input file timeline. The
        # default is `0s`.
        # Corresponds to the JSON property `startTimeOffset`
        # @return [String]
        attr_accessor :start_time_offset
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @end_time_offset = args[:end_time_offset] if args.key?(:end_time_offset)
          @inputs = args[:inputs] if args.key?(:inputs)
          @key = args[:key] if args.key?(:key)
          @start_time_offset = args[:start_time_offset] if args.key?(:start_time_offset)
        end
      end
      
      # Encoding of an input file such as an audio, video, or text track. Elementary
      # streams must be packaged before mapping and sharing between different output
      # formats.
      class ElementaryStream
        include Google::Apis::Core::Hashable
      
        # Audio stream resource.
        # Corresponds to the JSON property `audioStream`
        # @return [Google::Apis::TranscoderV1::AudioStream]
        attr_accessor :audio_stream
      
        # A unique key for this elementary stream.
        # Corresponds to the JSON property `key`
        # @return [String]
        attr_accessor :key
      
        # Encoding of a text stream. For example, closed captions or subtitles.
        # Corresponds to the JSON property `textStream`
        # @return [Google::Apis::TranscoderV1::TextStream]
        attr_accessor :text_stream
      
        # Video stream resource.
        # Corresponds to the JSON property `videoStream`
        # @return [Google::Apis::TranscoderV1::VideoStream]
        attr_accessor :video_stream
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @audio_stream = args[:audio_stream] if args.key?(:audio_stream)
          @key = args[:key] if args.key?(:key)
          @text_stream = args[:text_stream] if args.key?(:text_stream)
          @video_stream = args[:video_stream] if args.key?(:video_stream)
        end
      end
      
      # A generic empty message that you can re-use to avoid defining duplicated empty
      # messages in your APIs. A typical example is to use it as the request or the
      # response type of an API method. For instance: service Foo ` rpc Bar(google.
      # protobuf.Empty) returns (google.protobuf.Empty); `
      class Empty
        include Google::Apis::Core::Hashable
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
        end
      end
      
      # Encryption settings.
      class Encryption
        include Google::Apis::Core::Hashable
      
        # Configuration for AES-128 encryption.
        # Corresponds to the JSON property `aes128`
        # @return [Google::Apis::TranscoderV1::Aes128Encryption]
        attr_accessor :aes128
      
        # Defines configuration for DRM systems in use.
        # Corresponds to the JSON property `drmSystems`
        # @return [Google::Apis::TranscoderV1::DrmSystems]
        attr_accessor :drm_systems
      
        # Required. Identifier for this set of encryption options.
        # Corresponds to the JSON property `id`
        # @return [String]
        attr_accessor :id
      
        # Configuration for MPEG Common Encryption (MPEG-CENC).
        # Corresponds to the JSON property `mpegCenc`
        # @return [Google::Apis::TranscoderV1::MpegCommonEncryption]
        attr_accessor :mpeg_cenc
      
        # Configuration for SAMPLE-AES encryption.
        # Corresponds to the JSON property `sampleAes`
        # @return [Google::Apis::TranscoderV1::SampleAesEncryption]
        attr_accessor :sample_aes
      
        # Configuration for secrets stored in Google Secret Manager.
        # Corresponds to the JSON property `secretManagerKeySource`
        # @return [Google::Apis::TranscoderV1::SecretManagerSource]
        attr_accessor :secret_manager_key_source
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @aes128 = args[:aes128] if args.key?(:aes128)
          @drm_systems = args[:drm_systems] if args.key?(:drm_systems)
          @id = args[:id] if args.key?(:id)
          @mpeg_cenc = args[:mpeg_cenc] if args.key?(:mpeg_cenc)
          @sample_aes = args[:sample_aes] if args.key?(:sample_aes)
          @secret_manager_key_source = args[:secret_manager_key_source] if args.key?(:secret_manager_key_source)
        end
      end
      
      # Fairplay configuration.
      class Fairplay
        include Google::Apis::Core::Hashable
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
        end
      end
      
      # H264 codec settings.
      class H264CodecSettings
        include Google::Apis::Core::Hashable
      
        # Specifies whether an open Group of Pictures (GOP) structure should be allowed
        # or not. The default is `false`.
        # Corresponds to the JSON property `allowOpenGop`
        # @return [Boolean]
        attr_accessor :allow_open_gop
        alias_method :allow_open_gop?, :allow_open_gop
      
        # Specify the intensity of the adaptive quantizer (AQ). Must be between 0 and 1,
        # where 0 disables the quantizer and 1 maximizes the quantizer. A higher value
        # equals a lower bitrate but smoother image. The default is 0.
        # Corresponds to the JSON property `aqStrength`
        # @return [Float]
        attr_accessor :aq_strength
      
        # The number of consecutive B-frames. Must be greater than or equal to zero.
        # Must be less than H264CodecSettings.gop_frame_count if set. The default is 0.
        # Corresponds to the JSON property `bFrameCount`
        # @return [Fixnum]
        attr_accessor :b_frame_count
      
        # Allow B-pyramid for reference frame selection. This may not be supported on
        # all decoders. The default is `false`.
        # Corresponds to the JSON property `bPyramid`
        # @return [Boolean]
        attr_accessor :b_pyramid
        alias_method :b_pyramid?, :b_pyramid
      
        # Required. The video bitrate in bits per second. The minimum value is 1,000.
        # The maximum value is 800,000,000.
        # Corresponds to the JSON property `bitrateBps`
        # @return [Fixnum]
        attr_accessor :bitrate_bps
      
        # Target CRF level. Must be between 10 and 36, where 10 is the highest quality
        # and 36 is the most efficient compression. The default is 21.
        # Corresponds to the JSON property `crfLevel`
        # @return [Fixnum]
        attr_accessor :crf_level
      
        # Use two-pass encoding strategy to achieve better video quality.
        # H264CodecSettings.rate_control_mode must be `vbr`. The default is `false`.
        # Corresponds to the JSON property `enableTwoPass`
        # @return [Boolean]
        attr_accessor :enable_two_pass
        alias_method :enable_two_pass?, :enable_two_pass
      
        # The entropy coder to use. The default is `cabac`. Supported entropy coders: - `
        # cavlc` - `cabac`
        # Corresponds to the JSON property `entropyCoder`
        # @return [String]
        attr_accessor :entropy_coder
      
        # Required. The target video frame rate in frames per second (FPS). Must be less
        # than or equal to 120. Will default to the input frame rate if larger than the
        # input frame rate. The API will generate an output FPS that is divisible by the
        # input FPS, and smaller or equal to the target FPS. See [Calculating frame rate]
        # (https://cloud.google.com/transcoder/docs/concepts/frame-rate) for more
        # information.
        # Corresponds to the JSON property `frameRate`
        # @return [Float]
        attr_accessor :frame_rate
      
        # Select the GOP size based on the specified duration. The default is `3s`. Note
        # that `gopDuration` must be less than or equal to [`segmentDuration`](#
        # SegmentSettings), and [`segmentDuration`](#SegmentSettings) must be divisible
        # by `gopDuration`.
        # Corresponds to the JSON property `gopDuration`
        # @return [String]
        attr_accessor :gop_duration
      
        # Select the GOP size based on the specified frame count. Must be greater than
        # zero.
        # Corresponds to the JSON property `gopFrameCount`
        # @return [Fixnum]
        attr_accessor :gop_frame_count
      
        # The height of the video in pixels. Must be an even integer. When not specified,
        # the height is adjusted to match the specified width and input aspect ratio.
        # If both are omitted, the input height is used. For portrait videos that
        # contain horizontal ASR and rotation metadata, provide the height, in pixels,
        # per the horizontal ASR. The API calculates the width per the horizontal ASR.
        # The API detects any rotation metadata and swaps the requested height and width
        # for the output.
        # Corresponds to the JSON property `heightPixels`
        # @return [Fixnum]
        attr_accessor :height_pixels
      
        # Pixel format to use. The default is `yuv420p`. Supported pixel formats: - `
        # yuv420p` pixel format - `yuv422p` pixel format - `yuv444p` pixel format - `
        # yuv420p10` 10-bit HDR pixel format - `yuv422p10` 10-bit HDR pixel format - `
        # yuv444p10` 10-bit HDR pixel format - `yuv420p12` 12-bit HDR pixel format - `
        # yuv422p12` 12-bit HDR pixel format - `yuv444p12` 12-bit HDR pixel format
        # Corresponds to the JSON property `pixelFormat`
        # @return [String]
        attr_accessor :pixel_format
      
        # Enforces the specified codec preset. The default is `veryfast`. The available
        # options are [FFmpeg-compatible](https://trac.ffmpeg.org/wiki/Encode/H.264#
        # Preset). Note that certain values for this field may cause the transcoder to
        # override other fields you set in the `H264CodecSettings` message.
        # Corresponds to the JSON property `preset`
        # @return [String]
        attr_accessor :preset
      
        # Enforces the specified codec profile. The following profiles are supported: * `
        # baseline` * `main` * `high` (default) The available options are [FFmpeg-
        # compatible](https://trac.ffmpeg.org/wiki/Encode/H.264#Tune). Note that certain
        # values for this field may cause the transcoder to override other fields you
        # set in the `H264CodecSettings` message.
        # Corresponds to the JSON property `profile`
        # @return [String]
        attr_accessor :profile
      
        # Specify the mode. The default is `vbr`. Supported rate control modes: - `vbr` -
        # variable bitrate - `crf` - constant rate factor
        # Corresponds to the JSON property `rateControlMode`
        # @return [String]
        attr_accessor :rate_control_mode
      
        # Enforces the specified codec tune. The available options are [FFmpeg-
        # compatible](https://trac.ffmpeg.org/wiki/Encode/H.264#Tune). Note that certain
        # values for this field may cause the transcoder to override other fields you
        # set in the `H264CodecSettings` message.
        # Corresponds to the JSON property `tune`
        # @return [String]
        attr_accessor :tune
      
        # Initial fullness of the Video Buffering Verifier (VBV) buffer in bits. Must be
        # greater than zero. The default is equal to 90% of H264CodecSettings.
        # vbv_size_bits.
        # Corresponds to the JSON property `vbvFullnessBits`
        # @return [Fixnum]
        attr_accessor :vbv_fullness_bits
      
        # Size of the Video Buffering Verifier (VBV) buffer in bits. Must be greater
        # than zero. The default is equal to H264CodecSettings.bitrate_bps.
        # Corresponds to the JSON property `vbvSizeBits`
        # @return [Fixnum]
        attr_accessor :vbv_size_bits
      
        # The width of the video in pixels. Must be an even integer. When not specified,
        # the width is adjusted to match the specified height and input aspect ratio. If
        # both are omitted, the input width is used. For portrait videos that contain
        # horizontal ASR and rotation metadata, provide the width, in pixels, per the
        # horizontal ASR. The API calculates the height per the horizontal ASR. The API
        # detects any rotation metadata and swaps the requested height and width for the
        # output.
        # Corresponds to the JSON property `widthPixels`
        # @return [Fixnum]
        attr_accessor :width_pixels
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @allow_open_gop = args[:allow_open_gop] if args.key?(:allow_open_gop)
          @aq_strength = args[:aq_strength] if args.key?(:aq_strength)
          @b_frame_count = args[:b_frame_count] if args.key?(:b_frame_count)
          @b_pyramid = args[:b_pyramid] if args.key?(:b_pyramid)
          @bitrate_bps = args[:bitrate_bps] if args.key?(:bitrate_bps)
          @crf_level = args[:crf_level] if args.key?(:crf_level)
          @enable_two_pass = args[:enable_two_pass] if args.key?(:enable_two_pass)
          @entropy_coder = args[:entropy_coder] if args.key?(:entropy_coder)
          @frame_rate = args[:frame_rate] if args.key?(:frame_rate)
          @gop_duration = args[:gop_duration] if args.key?(:gop_duration)
          @gop_frame_count = args[:gop_frame_count] if args.key?(:gop_frame_count)
          @height_pixels = args[:height_pixels] if args.key?(:height_pixels)
          @pixel_format = args[:pixel_format] if args.key?(:pixel_format)
          @preset = args[:preset] if args.key?(:preset)
          @profile = args[:profile] if args.key?(:profile)
          @rate_control_mode = args[:rate_control_mode] if args.key?(:rate_control_mode)
          @tune = args[:tune] if args.key?(:tune)
          @vbv_fullness_bits = args[:vbv_fullness_bits] if args.key?(:vbv_fullness_bits)
          @vbv_size_bits = args[:vbv_size_bits] if args.key?(:vbv_size_bits)
          @width_pixels = args[:width_pixels] if args.key?(:width_pixels)
        end
      end
      
      # H265 codec settings.
      class H265CodecSettings
        include Google::Apis::Core::Hashable
      
        # Specifies whether an open Group of Pictures (GOP) structure should be allowed
        # or not. The default is `false`.
        # Corresponds to the JSON property `allowOpenGop`
        # @return [Boolean]
        attr_accessor :allow_open_gop
        alias_method :allow_open_gop?, :allow_open_gop
      
        # Specify the intensity of the adaptive quantizer (AQ). Must be between 0 and 1,
        # where 0 disables the quantizer and 1 maximizes the quantizer. A higher value
        # equals a lower bitrate but smoother image. The default is 0.
        # Corresponds to the JSON property `aqStrength`
        # @return [Float]
        attr_accessor :aq_strength
      
        # The number of consecutive B-frames. Must be greater than or equal to zero.
        # Must be less than H265CodecSettings.gop_frame_count if set. The default is 0.
        # Corresponds to the JSON property `bFrameCount`
        # @return [Fixnum]
        attr_accessor :b_frame_count
      
        # Allow B-pyramid for reference frame selection. This may not be supported on
        # all decoders. The default is `false`.
        # Corresponds to the JSON property `bPyramid`
        # @return [Boolean]
        attr_accessor :b_pyramid
        alias_method :b_pyramid?, :b_pyramid
      
        # Required. The video bitrate in bits per second. The minimum value is 1,000.
        # The maximum value is 800,000,000.
        # Corresponds to the JSON property `bitrateBps`
        # @return [Fixnum]
        attr_accessor :bitrate_bps
      
        # Target CRF level. Must be between 10 and 36, where 10 is the highest quality
        # and 36 is the most efficient compression. The default is 21.
        # Corresponds to the JSON property `crfLevel`
        # @return [Fixnum]
        attr_accessor :crf_level
      
        # Use two-pass encoding strategy to achieve better video quality.
        # H265CodecSettings.rate_control_mode must be `vbr`. The default is `false`.
        # Corresponds to the JSON property `enableTwoPass`
        # @return [Boolean]
        attr_accessor :enable_two_pass
        alias_method :enable_two_pass?, :enable_two_pass
      
        # Required. The target video frame rate in frames per second (FPS). Must be less
        # than or equal to 120. Will default to the input frame rate if larger than the
        # input frame rate. The API will generate an output FPS that is divisible by the
        # input FPS, and smaller or equal to the target FPS. See [Calculating frame rate]
        # (https://cloud.google.com/transcoder/docs/concepts/frame-rate) for more
        # information.
        # Corresponds to the JSON property `frameRate`
        # @return [Float]
        attr_accessor :frame_rate
      
        # Select the GOP size based on the specified duration. The default is `3s`. Note
        # that `gopDuration` must be less than or equal to [`segmentDuration`](#
        # SegmentSettings), and [`segmentDuration`](#SegmentSettings) must be divisible
        # by `gopDuration`.
        # Corresponds to the JSON property `gopDuration`
        # @return [String]
        attr_accessor :gop_duration
      
        # Select the GOP size based on the specified frame count. Must be greater than
        # zero.
        # Corresponds to the JSON property `gopFrameCount`
        # @return [Fixnum]
        attr_accessor :gop_frame_count
      
        # The height of the video in pixels. Must be an even integer. When not specified,
        # the height is adjusted to match the specified width and input aspect ratio.
        # If both are omitted, the input height is used. For portrait videos that
        # contain horizontal ASR and rotation metadata, provide the height, in pixels,
        # per the horizontal ASR. The API calculates the width per the horizontal ASR.
        # The API detects any rotation metadata and swaps the requested height and width
        # for the output.
        # Corresponds to the JSON property `heightPixels`
        # @return [Fixnum]
        attr_accessor :height_pixels
      
        # Pixel format to use. The default is `yuv420p`. Supported pixel formats: - `
        # yuv420p` pixel format - `yuv422p` pixel format - `yuv444p` pixel format - `
        # yuv420p10` 10-bit HDR pixel format - `yuv422p10` 10-bit HDR pixel format - `
        # yuv444p10` 10-bit HDR pixel format - `yuv420p12` 12-bit HDR pixel format - `
        # yuv422p12` 12-bit HDR pixel format - `yuv444p12` 12-bit HDR pixel format
        # Corresponds to the JSON property `pixelFormat`
        # @return [String]
        attr_accessor :pixel_format
      
        # Enforces the specified codec preset. The default is `veryfast`. The available
        # options are [FFmpeg-compatible](https://trac.ffmpeg.org/wiki/Encode/H.265).
        # Note that certain values for this field may cause the transcoder to override
        # other fields you set in the `H265CodecSettings` message.
        # Corresponds to the JSON property `preset`
        # @return [String]
        attr_accessor :preset
      
        # Enforces the specified codec profile. The following profiles are supported: *
        # 8-bit profiles * `main` (default) * `main-intra` * `mainstillpicture` * 10-bit
        # profiles * `main10` (default) * `main10-intra` * `main422-10` * `main422-10-
        # intra` * `main444-10` * `main444-10-intra` * 12-bit profiles * `main12` (
        # default) * `main12-intra` * `main422-12` * `main422-12-intra` * `main444-12` *
        # `main444-12-intra` The available options are [FFmpeg-compatible](https://x265.
        # readthedocs.io/). Note that certain values for this field may cause the
        # transcoder to override other fields you set in the `H265CodecSettings` message.
        # Corresponds to the JSON property `profile`
        # @return [String]
        attr_accessor :profile
      
        # Specify the mode. The default is `vbr`. Supported rate control modes: - `vbr` -
        # variable bitrate - `crf` - constant rate factor
        # Corresponds to the JSON property `rateControlMode`
        # @return [String]
        attr_accessor :rate_control_mode
      
        # Enforces the specified codec tune. The available options are [FFmpeg-
        # compatible](https://trac.ffmpeg.org/wiki/Encode/H.265). Note that certain
        # values for this field may cause the transcoder to override other fields you
        # set in the `H265CodecSettings` message.
        # Corresponds to the JSON property `tune`
        # @return [String]
        attr_accessor :tune
      
        # Initial fullness of the Video Buffering Verifier (VBV) buffer in bits. Must be
        # greater than zero. The default is equal to 90% of H265CodecSettings.
        # vbv_size_bits.
        # Corresponds to the JSON property `vbvFullnessBits`
        # @return [Fixnum]
        attr_accessor :vbv_fullness_bits
      
        # Size of the Video Buffering Verifier (VBV) buffer in bits. Must be greater
        # than zero. The default is equal to `VideoStream.bitrate_bps`.
        # Corresponds to the JSON property `vbvSizeBits`
        # @return [Fixnum]
        attr_accessor :vbv_size_bits
      
        # The width of the video in pixels. Must be an even integer. When not specified,
        # the width is adjusted to match the specified height and input aspect ratio. If
        # both are omitted, the input width is used. For portrait videos that contain
        # horizontal ASR and rotation metadata, provide the width, in pixels, per the
        # horizontal ASR. The API calculates the height per the horizontal ASR. The API
        # detects any rotation metadata and swaps the requested height and width for the
        # output.
        # Corresponds to the JSON property `widthPixels`
        # @return [Fixnum]
        attr_accessor :width_pixels
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @allow_open_gop = args[:allow_open_gop] if args.key?(:allow_open_gop)
          @aq_strength = args[:aq_strength] if args.key?(:aq_strength)
          @b_frame_count = args[:b_frame_count] if args.key?(:b_frame_count)
          @b_pyramid = args[:b_pyramid] if args.key?(:b_pyramid)
          @bitrate_bps = args[:bitrate_bps] if args.key?(:bitrate_bps)
          @crf_level = args[:crf_level] if args.key?(:crf_level)
          @enable_two_pass = args[:enable_two_pass] if args.key?(:enable_two_pass)
          @frame_rate = args[:frame_rate] if args.key?(:frame_rate)
          @gop_duration = args[:gop_duration] if args.key?(:gop_duration)
          @gop_frame_count = args[:gop_frame_count] if args.key?(:gop_frame_count)
          @height_pixels = args[:height_pixels] if args.key?(:height_pixels)
          @pixel_format = args[:pixel_format] if args.key?(:pixel_format)
          @preset = args[:preset] if args.key?(:preset)
          @profile = args[:profile] if args.key?(:profile)
          @rate_control_mode = args[:rate_control_mode] if args.key?(:rate_control_mode)
          @tune = args[:tune] if args.key?(:tune)
          @vbv_fullness_bits = args[:vbv_fullness_bits] if args.key?(:vbv_fullness_bits)
          @vbv_size_bits = args[:vbv_size_bits] if args.key?(:vbv_size_bits)
          @width_pixels = args[:width_pixels] if args.key?(:width_pixels)
        end
      end
      
      # Overlaid image.
      class Image
        include Google::Apis::Core::Hashable
      
        # Target image opacity. Valid values are from `1.0` (solid, default) to `0.0` (
        # transparent), exclusive. Set this to a value greater than `0.0`.
        # Corresponds to the JSON property `alpha`
        # @return [Float]
        attr_accessor :alpha
      
        # 2D normalized coordinates. Default: ``0.0, 0.0``
        # Corresponds to the JSON property `resolution`
        # @return [Google::Apis::TranscoderV1::NormalizedCoordinate]
        attr_accessor :resolution
      
        # Required. URI of the image in Cloud Storage. For example, `gs://bucket/inputs/
        # image.png`. Only PNG and JPEG images are supported.
        # Corresponds to the JSON property `uri`
        # @return [String]
        attr_accessor :uri
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @alpha = args[:alpha] if args.key?(:alpha)
          @resolution = args[:resolution] if args.key?(:resolution)
          @uri = args[:uri] if args.key?(:uri)
        end
      end
      
      # Input asset.
      class Input
        include Google::Apis::Core::Hashable
      
        # A unique key for this input. Must be specified when using advanced mapping and
        # edit lists.
        # Corresponds to the JSON property `key`
        # @return [String]
        attr_accessor :key
      
        # Preprocessing configurations.
        # Corresponds to the JSON property `preprocessingConfig`
        # @return [Google::Apis::TranscoderV1::PreprocessingConfig]
        attr_accessor :preprocessing_config
      
        # URI of the media. Input files must be at least 5 seconds in duration and
        # stored in Cloud Storage (for example, `gs://bucket/inputs/file.mp4`). If empty,
        # the value is populated from Job.input_uri. See [Supported input and output
        # formats](https://cloud.google.com/transcoder/docs/concepts/supported-input-and-
        # output-formats).
        # Corresponds to the JSON property `uri`
        # @return [String]
        attr_accessor :uri
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @key = args[:key] if args.key?(:key)
          @preprocessing_config = args[:preprocessing_config] if args.key?(:preprocessing_config)
          @uri = args[:uri] if args.key?(:uri)
        end
      end
      
      # Transcoding job resource.
      class Job
        include Google::Apis::Core::Hashable
      
        # The processing priority of a batch job. This field can only be set for batch
        # mode jobs. The default value is 0. This value cannot be negative. Higher
        # values correspond to higher priorities for the job.
        # Corresponds to the JSON property `batchModePriority`
        # @return [Fixnum]
        attr_accessor :batch_mode_priority
      
        # Job configuration
        # Corresponds to the JSON property `config`
        # @return [Google::Apis::TranscoderV1::JobConfig]
        attr_accessor :config
      
        # Output only. The time the job was created.
        # Corresponds to the JSON property `createTime`
        # @return [String]
        attr_accessor :create_time
      
        # Output only. The time the transcoding finished.
        # Corresponds to the JSON property `endTime`
        # @return [String]
        attr_accessor :end_time
      
        # The `Status` type defines a logical error model that is suitable for different
        # programming environments, including REST APIs and RPC APIs. It is used by [
        # gRPC](https://github.com/grpc). Each `Status` message contains three pieces of
        # data: error code, error message, and error details. You can find out more
        # about this error model and how to work with it in the [API Design Guide](https:
        # //cloud.google.com/apis/design/errors).
        # Corresponds to the JSON property `error`
        # @return [Google::Apis::TranscoderV1::Status]
        attr_accessor :error
      
        # Input only. Specify the `input_uri` to populate empty `uri` fields in each
        # element of `Job.config.inputs` or `JobTemplate.config.inputs` when using
        # template. URI of the media. Input files must be at least 5 seconds in duration
        # and stored in Cloud Storage (for example, `gs://bucket/inputs/file.mp4`). See [
        # Supported input and output formats](https://cloud.google.com/transcoder/docs/
        # concepts/supported-input-and-output-formats).
        # Corresponds to the JSON property `inputUri`
        # @return [String]
        attr_accessor :input_uri
      
        # The labels associated with this job. You can use these to organize and group
        # your jobs.
        # Corresponds to the JSON property `labels`
        # @return [Hash<String,String>]
        attr_accessor :labels
      
        # The processing mode of the job. The default is `PROCESSING_MODE_INTERACTIVE`.
        # Corresponds to the JSON property `mode`
        # @return [String]
        attr_accessor :mode
      
        # The resource name of the job. Format: `projects/`project_number`/locations/`
        # location`/jobs/`job``
        # Corresponds to the JSON property `name`
        # @return [String]
        attr_accessor :name
      
        # Optional. The optimization strategy of the job. The default is `AUTODETECT`.
        # Corresponds to the JSON property `optimization`
        # @return [String]
        attr_accessor :optimization
      
        # Input only. Specify the `output_uri` to populate an empty `Job.config.output.
        # uri` or `JobTemplate.config.output.uri` when using template. URI for the
        # output file(s). For example, `gs://my-bucket/outputs/`. See [Supported input
        # and output formats](https://cloud.google.com/transcoder/docs/concepts/
        # supported-input-and-output-formats).
        # Corresponds to the JSON property `outputUri`
        # @return [String]
        attr_accessor :output_uri
      
        # Output only. The time the transcoding started.
        # Corresponds to the JSON property `startTime`
        # @return [String]
        attr_accessor :start_time
      
        # Output only. The current state of the job.
        # Corresponds to the JSON property `state`
        # @return [String]
        attr_accessor :state
      
        # Input only. Specify the `template_id` to use for populating `Job.config`. The
        # default is `preset/web-hd`, which is the only supported preset. User defined
        # JobTemplate: ``job_template_id``
        # Corresponds to the JSON property `templateId`
        # @return [String]
        attr_accessor :template_id
      
        # Job time to live value in days, which will be effective after job completion.
        # Job should be deleted automatically after the given TTL. Enter a value between
        # 1 and 90. The default is 30.
        # Corresponds to the JSON property `ttlAfterCompletionDays`
        # @return [Fixnum]
        attr_accessor :ttl_after_completion_days
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @batch_mode_priority = args[:batch_mode_priority] if args.key?(:batch_mode_priority)
          @config = args[:config] if args.key?(:config)
          @create_time = args[:create_time] if args.key?(:create_time)
          @end_time = args[:end_time] if args.key?(:end_time)
          @error = args[:error] if args.key?(:error)
          @input_uri = args[:input_uri] if args.key?(:input_uri)
          @labels = args[:labels] if args.key?(:labels)
          @mode = args[:mode] if args.key?(:mode)
          @name = args[:name] if args.key?(:name)
          @optimization = args[:optimization] if args.key?(:optimization)
          @output_uri = args[:output_uri] if args.key?(:output_uri)
          @start_time = args[:start_time] if args.key?(:start_time)
          @state = args[:state] if args.key?(:state)
          @template_id = args[:template_id] if args.key?(:template_id)
          @ttl_after_completion_days = args[:ttl_after_completion_days] if args.key?(:ttl_after_completion_days)
        end
      end
      
      # Job configuration
      class JobConfig
        include Google::Apis::Core::Hashable
      
        # List of ad breaks. Specifies where to insert ad break tags in the output
        # manifests.
        # Corresponds to the JSON property `adBreaks`
        # @return [Array<Google::Apis::TranscoderV1::AdBreak>]
        attr_accessor :ad_breaks
      
        # List of edit atoms. Defines the ultimate timeline of the resulting file or
        # manifest.
        # Corresponds to the JSON property `editList`
        # @return [Array<Google::Apis::TranscoderV1::EditAtom>]
        attr_accessor :edit_list
      
        # List of elementary streams.
        # Corresponds to the JSON property `elementaryStreams`
        # @return [Array<Google::Apis::TranscoderV1::ElementaryStream>]
        attr_accessor :elementary_streams
      
        # List of encryption configurations for the content. Each configuration has an
        # ID. Specify this ID in the MuxStream.encryption_id field to indicate the
        # configuration to use for that `MuxStream` output.
        # Corresponds to the JSON property `encryptions`
        # @return [Array<Google::Apis::TranscoderV1::Encryption>]
        attr_accessor :encryptions
      
        # List of input assets stored in Cloud Storage.
        # Corresponds to the JSON property `inputs`
        # @return [Array<Google::Apis::TranscoderV1::Input>]
        attr_accessor :inputs
      
        # List of output manifests.
        # Corresponds to the JSON property `manifests`
        # @return [Array<Google::Apis::TranscoderV1::Manifest>]
        attr_accessor :manifests
      
        # List of multiplexing settings for output streams.
        # Corresponds to the JSON property `muxStreams`
        # @return [Array<Google::Apis::TranscoderV1::MuxStream>]
        attr_accessor :mux_streams
      
        # Location of output file(s) in a Cloud Storage bucket.
        # Corresponds to the JSON property `output`
        # @return [Google::Apis::TranscoderV1::Output]
        attr_accessor :output
      
        # List of overlays on the output video, in descending Z-order.
        # Corresponds to the JSON property `overlays`
        # @return [Array<Google::Apis::TranscoderV1::Overlay>]
        attr_accessor :overlays
      
        # A Pub/Sub destination.
        # Corresponds to the JSON property `pubsubDestination`
        # @return [Google::Apis::TranscoderV1::PubsubDestination]
        attr_accessor :pubsub_destination
      
        # List of output sprite sheets. Spritesheets require at least one VideoStream in
        # the Jobconfig.
        # Corresponds to the JSON property `spriteSheets`
        # @return [Array<Google::Apis::TranscoderV1::SpriteSheet>]
        attr_accessor :sprite_sheets
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @ad_breaks = args[:ad_breaks] if args.key?(:ad_breaks)
          @edit_list = args[:edit_list] if args.key?(:edit_list)
          @elementary_streams = args[:elementary_streams] if args.key?(:elementary_streams)
          @encryptions = args[:encryptions] if args.key?(:encryptions)
          @inputs = args[:inputs] if args.key?(:inputs)
          @manifests = args[:manifests] if args.key?(:manifests)
          @mux_streams = args[:mux_streams] if args.key?(:mux_streams)
          @output = args[:output] if args.key?(:output)
          @overlays = args[:overlays] if args.key?(:overlays)
          @pubsub_destination = args[:pubsub_destination] if args.key?(:pubsub_destination)
          @sprite_sheets = args[:sprite_sheets] if args.key?(:sprite_sheets)
        end
      end
      
      # Transcoding job template resource.
      class JobTemplate
        include Google::Apis::Core::Hashable
      
        # Job configuration
        # Corresponds to the JSON property `config`
        # @return [Google::Apis::TranscoderV1::JobConfig]
        attr_accessor :config
      
        # The labels associated with this job template. You can use these to organize
        # and group your job templates.
        # Corresponds to the JSON property `labels`
        # @return [Hash<String,String>]
        attr_accessor :labels
      
        # The resource name of the job template. Format: `projects/`project_number`/
        # locations/`location`/jobTemplates/`job_template``
        # Corresponds to the JSON property `name`
        # @return [String]
        attr_accessor :name
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @config = args[:config] if args.key?(:config)
          @labels = args[:labels] if args.key?(:labels)
          @name = args[:name] if args.key?(:name)
        end
      end
      
      # Response message for `TranscoderService.ListJobTemplates`.
      class ListJobTemplatesResponse
        include Google::Apis::Core::Hashable
      
        # List of job templates in the specified region.
        # Corresponds to the JSON property `jobTemplates`
        # @return [Array<Google::Apis::TranscoderV1::JobTemplate>]
        attr_accessor :job_templates
      
        # The pagination token.
        # Corresponds to the JSON property `nextPageToken`
        # @return [String]
        attr_accessor :next_page_token
      
        # List of regions that could not be reached.
        # Corresponds to the JSON property `unreachable`
        # @return [Array<String>]
        attr_accessor :unreachable
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @job_templates = args[:job_templates] if args.key?(:job_templates)
          @next_page_token = args[:next_page_token] if args.key?(:next_page_token)
          @unreachable = args[:unreachable] if args.key?(:unreachable)
        end
      end
      
      # Response message for `TranscoderService.ListJobs`.
      class ListJobsResponse
        include Google::Apis::Core::Hashable
      
        # List of jobs in the specified region.
        # Corresponds to the JSON property `jobs`
        # @return [Array<Google::Apis::TranscoderV1::Job>]
        attr_accessor :jobs
      
        # The pagination token.
        # Corresponds to the JSON property `nextPageToken`
        # @return [String]
        attr_accessor :next_page_token
      
        # List of regions that could not be reached.
        # Corresponds to the JSON property `unreachable`
        # @return [Array<String>]
        attr_accessor :unreachable
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @jobs = args[:jobs] if args.key?(:jobs)
          @next_page_token = args[:next_page_token] if args.key?(:next_page_token)
          @unreachable = args[:unreachable] if args.key?(:unreachable)
        end
      end
      
      # Manifest configuration.
      class Manifest
        include Google::Apis::Core::Hashable
      
        # `DASH` manifest configuration.
        # Corresponds to the JSON property `dash`
        # @return [Google::Apis::TranscoderV1::DashConfig]
        attr_accessor :dash
      
        # The name of the generated file. The default is `manifest` with the extension
        # suffix corresponding to the Manifest.type.
        # Corresponds to the JSON property `fileName`
        # @return [String]
        attr_accessor :file_name
      
        # Required. List of user supplied MuxStream.key values that should appear in
        # this manifest. When Manifest.type is `HLS`, a media manifest with name
        # MuxStream.key and `.m3u8` extension is generated for each element in this list.
        # Corresponds to the JSON property `muxStreams`
        # @return [Array<String>]
        attr_accessor :mux_streams
      
        # Required. Type of the manifest.
        # Corresponds to the JSON property `type`
        # @return [String]
        attr_accessor :type
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @dash = args[:dash] if args.key?(:dash)
          @file_name = args[:file_name] if args.key?(:file_name)
          @mux_streams = args[:mux_streams] if args.key?(:mux_streams)
          @type = args[:type] if args.key?(:type)
        end
      end
      
      # Configuration for MPEG Common Encryption (MPEG-CENC).
      class MpegCommonEncryption
        include Google::Apis::Core::Hashable
      
        # Required. Specify the encryption scheme. Supported encryption schemes: - `cenc`
        # - `cbcs`
        # Corresponds to the JSON property `scheme`
        # @return [String]
        attr_accessor :scheme
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @scheme = args[:scheme] if args.key?(:scheme)
        end
      end
      
      # Multiplexing settings for output stream.
      class MuxStream
        include Google::Apis::Core::Hashable
      
        # The container format. The default is `mp4` Supported container formats: - `ts`
        # - `fmp4`- the corresponding file extension is `.m4s` - `mp4` - `vtt` See also:
        # [Supported input and output formats](https://cloud.google.com/transcoder/docs/
        # concepts/supported-input-and-output-formats)
        # Corresponds to the JSON property `container`
        # @return [String]
        attr_accessor :container
      
        # List of ElementaryStream.key values multiplexed in this stream.
        # Corresponds to the JSON property `elementaryStreams`
        # @return [Array<String>]
        attr_accessor :elementary_streams
      
        # Identifier of the encryption configuration to use. If omitted, output will be
        # unencrypted.
        # Corresponds to the JSON property `encryptionId`
        # @return [String]
        attr_accessor :encryption_id
      
        # The name of the generated file. The default is MuxStream.key with the
        # extension suffix corresponding to the MuxStream.container. Individual segments
        # also have an incremental 10-digit zero-padded suffix starting from 0 before
        # the extension, such as `mux_stream0000000123.ts`.
        # Corresponds to the JSON property `fileName`
        # @return [String]
        attr_accessor :file_name
      
        # A unique key for this multiplexed stream.
        # Corresponds to the JSON property `key`
        # @return [String]
        attr_accessor :key
      
        # Segment settings for `ts`, `fmp4` and `vtt`.
        # Corresponds to the JSON property `segmentSettings`
        # @return [Google::Apis::TranscoderV1::SegmentSettings]
        attr_accessor :segment_settings
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @container = args[:container] if args.key?(:container)
          @elementary_streams = args[:elementary_streams] if args.key?(:elementary_streams)
          @encryption_id = args[:encryption_id] if args.key?(:encryption_id)
          @file_name = args[:file_name] if args.key?(:file_name)
          @key = args[:key] if args.key?(:key)
          @segment_settings = args[:segment_settings] if args.key?(:segment_settings)
        end
      end
      
      # 2D normalized coordinates. Default: ``0.0, 0.0``
      class NormalizedCoordinate
        include Google::Apis::Core::Hashable
      
        # Normalized x coordinate.
        # Corresponds to the JSON property `x`
        # @return [Float]
        attr_accessor :x
      
        # Normalized y coordinate.
        # Corresponds to the JSON property `y`
        # @return [Float]
        attr_accessor :y
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @x = args[:x] if args.key?(:x)
          @y = args[:y] if args.key?(:y)
        end
      end
      
      # Location of output file(s) in a Cloud Storage bucket.
      class Output
        include Google::Apis::Core::Hashable
      
        # URI for the output file(s). For example, `gs://my-bucket/outputs/`. If empty,
        # the value is populated from Job.output_uri. See [Supported input and output
        # formats](https://cloud.google.com/transcoder/docs/concepts/supported-input-and-
        # output-formats).
        # Corresponds to the JSON property `uri`
        # @return [String]
        attr_accessor :uri
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @uri = args[:uri] if args.key?(:uri)
        end
      end
      
      # Overlay configuration.
      class Overlay
        include Google::Apis::Core::Hashable
      
        # List of animations. The list should be chronological, without any time overlap.
        # Corresponds to the JSON property `animations`
        # @return [Array<Google::Apis::TranscoderV1::Animation>]
        attr_accessor :animations
      
        # Overlaid image.
        # Corresponds to the JSON property `image`
        # @return [Google::Apis::TranscoderV1::Image]
        attr_accessor :image
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @animations = args[:animations] if args.key?(:animations)
          @image = args[:image] if args.key?(:image)
        end
      end
      
      # Pad filter configuration for the input video. The padded input video is scaled
      # after padding with black to match the output resolution.
      class Pad
        include Google::Apis::Core::Hashable
      
        # The number of pixels to add to the bottom. The default is 0.
        # Corresponds to the JSON property `bottomPixels`
        # @return [Fixnum]
        attr_accessor :bottom_pixels
      
        # The number of pixels to add to the left. The default is 0.
        # Corresponds to the JSON property `leftPixels`
        # @return [Fixnum]
        attr_accessor :left_pixels
      
        # The number of pixels to add to the right. The default is 0.
        # Corresponds to the JSON property `rightPixels`
        # @return [Fixnum]
        attr_accessor :right_pixels
      
        # The number of pixels to add to the top. The default is 0.
        # Corresponds to the JSON property `topPixels`
        # @return [Fixnum]
        attr_accessor :top_pixels
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @bottom_pixels = args[:bottom_pixels] if args.key?(:bottom_pixels)
          @left_pixels = args[:left_pixels] if args.key?(:left_pixels)
          @right_pixels = args[:right_pixels] if args.key?(:right_pixels)
          @top_pixels = args[:top_pixels] if args.key?(:top_pixels)
        end
      end
      
      # Playready configuration.
      class Playready
        include Google::Apis::Core::Hashable
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
        end
      end
      
      # Preprocessing configurations.
      class PreprocessingConfig
        include Google::Apis::Core::Hashable
      
        # Audio preprocessing configuration.
        # Corresponds to the JSON property `audio`
        # @return [Google::Apis::TranscoderV1::Audio]
        attr_accessor :audio
      
        # Color preprocessing configuration. **Note:** This configuration is not
        # supported.
        # Corresponds to the JSON property `color`
        # @return [Google::Apis::TranscoderV1::Color]
        attr_accessor :color
      
        # Video cropping configuration for the input video. The cropped input video is
        # scaled to match the output resolution.
        # Corresponds to the JSON property `crop`
        # @return [Google::Apis::TranscoderV1::Crop]
        attr_accessor :crop
      
        # Deblock preprocessing configuration. **Note:** This configuration is not
        # supported.
        # Corresponds to the JSON property `deblock`
        # @return [Google::Apis::TranscoderV1::Deblock]
        attr_accessor :deblock
      
        # Deinterlace configuration for input video.
        # Corresponds to the JSON property `deinterlace`
        # @return [Google::Apis::TranscoderV1::Deinterlace]
        attr_accessor :deinterlace
      
        # Denoise preprocessing configuration. **Note:** This configuration is not
        # supported.
        # Corresponds to the JSON property `denoise`
        # @return [Google::Apis::TranscoderV1::Denoise]
        attr_accessor :denoise
      
        # Pad filter configuration for the input video. The padded input video is scaled
        # after padding with black to match the output resolution.
        # Corresponds to the JSON property `pad`
        # @return [Google::Apis::TranscoderV1::Pad]
        attr_accessor :pad
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @audio = args[:audio] if args.key?(:audio)
          @color = args[:color] if args.key?(:color)
          @crop = args[:crop] if args.key?(:crop)
          @deblock = args[:deblock] if args.key?(:deblock)
          @deinterlace = args[:deinterlace] if args.key?(:deinterlace)
          @denoise = args[:denoise] if args.key?(:denoise)
          @pad = args[:pad] if args.key?(:pad)
        end
      end
      
      # A Pub/Sub destination.
      class PubsubDestination
        include Google::Apis::Core::Hashable
      
        # The name of the Pub/Sub topic to publish job completion notification to. For
        # example: `projects/`project`/topics/`topic``.
        # Corresponds to the JSON property `topic`
        # @return [String]
        attr_accessor :topic
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @topic = args[:topic] if args.key?(:topic)
        end
      end
      
      # Configuration for SAMPLE-AES encryption.
      class SampleAesEncryption
        include Google::Apis::Core::Hashable
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
        end
      end
      
      # Configuration for secrets stored in Google Secret Manager.
      class SecretManagerSource
        include Google::Apis::Core::Hashable
      
        # Required. The name of the Secret Version containing the encryption key in the
        # following format: `projects/`project`/secrets/`secret_id`/versions/`
        # version_number`` Note that only numbered versions are supported. Aliases like "
        # latest" are not supported.
        # Corresponds to the JSON property `secretVersion`
        # @return [String]
        attr_accessor :secret_version
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @secret_version = args[:secret_version] if args.key?(:secret_version)
        end
      end
      
      # Segment settings for `ts`, `fmp4` and `vtt`.
      class SegmentSettings
        include Google::Apis::Core::Hashable
      
        # Required. Create an individual segment file. The default is `false`.
        # Corresponds to the JSON property `individualSegments`
        # @return [Boolean]
        attr_accessor :individual_segments
        alias_method :individual_segments?, :individual_segments
      
        # Duration of the segments in seconds. The default is `6.0s`. Note that `
        # segmentDuration` must be greater than or equal to [`gopDuration`](#videostream)
        # , and `segmentDuration` must be divisible by [`gopDuration`](#videostream).
        # Corresponds to the JSON property `segmentDuration`
        # @return [String]
        attr_accessor :segment_duration
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @individual_segments = args[:individual_segments] if args.key?(:individual_segments)
          @segment_duration = args[:segment_duration] if args.key?(:segment_duration)
        end
      end
      
      # Sprite sheet configuration.
      class SpriteSheet
        include Google::Apis::Core::Hashable
      
        # The maximum number of sprites per row in a sprite sheet. The default is 0,
        # which indicates no maximum limit.
        # Corresponds to the JSON property `columnCount`
        # @return [Fixnum]
        attr_accessor :column_count
      
        # End time in seconds, relative to the output file timeline. When `
        # end_time_offset` is not specified, the sprites are generated until the end of
        # the output file.
        # Corresponds to the JSON property `endTimeOffset`
        # @return [String]
        attr_accessor :end_time_offset
      
        # Required. File name prefix for the generated sprite sheets. Each sprite sheet
        # has an incremental 10-digit zero-padded suffix starting from 0 before the
        # extension, such as `sprite_sheet0000000123.jpeg`.
        # Corresponds to the JSON property `filePrefix`
        # @return [String]
        attr_accessor :file_prefix
      
        # Format type. The default is `jpeg`. Supported formats: - `jpeg`
        # Corresponds to the JSON property `format`
        # @return [String]
        attr_accessor :format
      
        # Starting from `0s`, create sprites at regular intervals. Specify the interval
        # value in seconds.
        # Corresponds to the JSON property `interval`
        # @return [String]
        attr_accessor :interval
      
        # The quality of the generated sprite sheet. Enter a value between 1 and 100,
        # where 1 is the lowest quality and 100 is the highest quality. The default is
        # 100. A high quality value corresponds to a low image data compression ratio.
        # Corresponds to the JSON property `quality`
        # @return [Fixnum]
        attr_accessor :quality
      
        # The maximum number of rows per sprite sheet. When the sprite sheet is full, a
        # new sprite sheet is created. The default is 0, which indicates no maximum
        # limit.
        # Corresponds to the JSON property `rowCount`
        # @return [Fixnum]
        attr_accessor :row_count
      
        # Required. The height of sprite in pixels. Must be an even integer. To preserve
        # the source aspect ratio, set the SpriteSheet.sprite_height_pixels field or the
        # SpriteSheet.sprite_width_pixels field, but not both (the API will
        # automatically calculate the missing field). For portrait videos that contain
        # horizontal ASR and rotation metadata, provide the height, in pixels, per the
        # horizontal ASR. The API calculates the width per the horizontal ASR. The API
        # detects any rotation metadata and swaps the requested height and width for the
        # output.
        # Corresponds to the JSON property `spriteHeightPixels`
        # @return [Fixnum]
        attr_accessor :sprite_height_pixels
      
        # Required. The width of sprite in pixels. Must be an even integer. To preserve
        # the source aspect ratio, set the SpriteSheet.sprite_width_pixels field or the
        # SpriteSheet.sprite_height_pixels field, but not both (the API will
        # automatically calculate the missing field). For portrait videos that contain
        # horizontal ASR and rotation metadata, provide the width, in pixels, per the
        # horizontal ASR. The API calculates the height per the horizontal ASR. The API
        # detects any rotation metadata and swaps the requested height and width for the
        # output.
        # Corresponds to the JSON property `spriteWidthPixels`
        # @return [Fixnum]
        attr_accessor :sprite_width_pixels
      
        # Start time in seconds, relative to the output file timeline. Determines the
        # first sprite to pick. The default is `0s`.
        # Corresponds to the JSON property `startTimeOffset`
        # @return [String]
        attr_accessor :start_time_offset
      
        # Total number of sprites. Create the specified number of sprites distributed
        # evenly across the timeline of the output media. The default is 100.
        # Corresponds to the JSON property `totalCount`
        # @return [Fixnum]
        attr_accessor :total_count
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @column_count = args[:column_count] if args.key?(:column_count)
          @end_time_offset = args[:end_time_offset] if args.key?(:end_time_offset)
          @file_prefix = args[:file_prefix] if args.key?(:file_prefix)
          @format = args[:format] if args.key?(:format)
          @interval = args[:interval] if args.key?(:interval)
          @quality = args[:quality] if args.key?(:quality)
          @row_count = args[:row_count] if args.key?(:row_count)
          @sprite_height_pixels = args[:sprite_height_pixels] if args.key?(:sprite_height_pixels)
          @sprite_width_pixels = args[:sprite_width_pixels] if args.key?(:sprite_width_pixels)
          @start_time_offset = args[:start_time_offset] if args.key?(:start_time_offset)
          @total_count = args[:total_count] if args.key?(:total_count)
        end
      end
      
      # The `Status` type defines a logical error model that is suitable for different
      # programming environments, including REST APIs and RPC APIs. It is used by [
      # gRPC](https://github.com/grpc). Each `Status` message contains three pieces of
      # data: error code, error message, and error details. You can find out more
      # about this error model and how to work with it in the [API Design Guide](https:
      # //cloud.google.com/apis/design/errors).
      class Status
        include Google::Apis::Core::Hashable
      
        # The status code, which should be an enum value of google.rpc.Code.
        # Corresponds to the JSON property `code`
        # @return [Fixnum]
        attr_accessor :code
      
        # A list of messages that carry the error details. There is a common set of
        # message types for APIs to use.
        # Corresponds to the JSON property `details`
        # @return [Array<Hash<String,Object>>]
        attr_accessor :details
      
        # A developer-facing error message, which should be in English. Any user-facing
        # error message should be localized and sent in the google.rpc.Status.details
        # field, or localized by the client.
        # Corresponds to the JSON property `message`
        # @return [String]
        attr_accessor :message
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @code = args[:code] if args.key?(:code)
          @details = args[:details] if args.key?(:details)
          @message = args[:message] if args.key?(:message)
        end
      end
      
      # The mapping for the JobConfig.edit_list atoms with text EditAtom.inputs.
      class TextMapping
        include Google::Apis::Core::Hashable
      
        # Required. The EditAtom.key that references atom with text inputs in the
        # JobConfig.edit_list.
        # Corresponds to the JSON property `atomKey`
        # @return [String]
        attr_accessor :atom_key
      
        # Required. The Input.key that identifies the input file.
        # Corresponds to the JSON property `inputKey`
        # @return [String]
        attr_accessor :input_key
      
        # Required. The zero-based index of the track in the input file.
        # Corresponds to the JSON property `inputTrack`
        # @return [Fixnum]
        attr_accessor :input_track
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @atom_key = args[:atom_key] if args.key?(:atom_key)
          @input_key = args[:input_key] if args.key?(:input_key)
          @input_track = args[:input_track] if args.key?(:input_track)
        end
      end
      
      # Encoding of a text stream. For example, closed captions or subtitles.
      class TextStream
        include Google::Apis::Core::Hashable
      
        # The codec for this text stream. The default is `webvtt`. Supported text codecs:
        # - `srt` - `ttml` - `cea608` - `cea708` - `webvtt`
        # Corresponds to the JSON property `codec`
        # @return [String]
        attr_accessor :codec
      
        # The name for this particular text stream that will be added to the HLS/DASH
        # manifest. Not supported in MP4 files.
        # Corresponds to the JSON property `displayName`
        # @return [String]
        attr_accessor :display_name
      
        # The BCP-47 language code, such as `en-US` or `sr-Latn`. For more information,
        # see https://www.unicode.org/reports/tr35/#Unicode_locale_identifier. Not
        # supported in MP4 files.
        # Corresponds to the JSON property `languageCode`
        # @return [String]
        attr_accessor :language_code
      
        # The mapping for the JobConfig.edit_list atoms with text EditAtom.inputs.
        # Corresponds to the JSON property `mapping`
        # @return [Array<Google::Apis::TranscoderV1::TextMapping>]
        attr_accessor :mapping
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @codec = args[:codec] if args.key?(:codec)
          @display_name = args[:display_name] if args.key?(:display_name)
          @language_code = args[:language_code] if args.key?(:language_code)
          @mapping = args[:mapping] if args.key?(:mapping)
        end
      end
      
      # Video stream resource.
      class VideoStream
        include Google::Apis::Core::Hashable
      
        # H264 codec settings.
        # Corresponds to the JSON property `h264`
        # @return [Google::Apis::TranscoderV1::H264CodecSettings]
        attr_accessor :h264
      
        # H265 codec settings.
        # Corresponds to the JSON property `h265`
        # @return [Google::Apis::TranscoderV1::H265CodecSettings]
        attr_accessor :h265
      
        # VP9 codec settings.
        # Corresponds to the JSON property `vp9`
        # @return [Google::Apis::TranscoderV1::Vp9CodecSettings]
        attr_accessor :vp9
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @h264 = args[:h264] if args.key?(:h264)
          @h265 = args[:h265] if args.key?(:h265)
          @vp9 = args[:vp9] if args.key?(:vp9)
        end
      end
      
      # VP9 codec settings.
      class Vp9CodecSettings
        include Google::Apis::Core::Hashable
      
        # Required. The video bitrate in bits per second. The minimum value is 1,000.
        # The maximum value is 480,000,000.
        # Corresponds to the JSON property `bitrateBps`
        # @return [Fixnum]
        attr_accessor :bitrate_bps
      
        # Target CRF level. Must be between 10 and 36, where 10 is the highest quality
        # and 36 is the most efficient compression. The default is 21. **Note:** This
        # field is not supported.
        # Corresponds to the JSON property `crfLevel`
        # @return [Fixnum]
        attr_accessor :crf_level
      
        # Required. The target video frame rate in frames per second (FPS). Must be less
        # than or equal to 120. Will default to the input frame rate if larger than the
        # input frame rate. The API will generate an output FPS that is divisible by the
        # input FPS, and smaller or equal to the target FPS. See [Calculating frame rate]
        # (https://cloud.google.com/transcoder/docs/concepts/frame-rate) for more
        # information.
        # Corresponds to the JSON property `frameRate`
        # @return [Float]
        attr_accessor :frame_rate
      
        # Select the GOP size based on the specified duration. The default is `3s`. Note
        # that `gopDuration` must be less than or equal to [`segmentDuration`](#
        # SegmentSettings), and [`segmentDuration`](#SegmentSettings) must be divisible
        # by `gopDuration`.
        # Corresponds to the JSON property `gopDuration`
        # @return [String]
        attr_accessor :gop_duration
      
        # Select the GOP size based on the specified frame count. Must be greater than
        # zero.
        # Corresponds to the JSON property `gopFrameCount`
        # @return [Fixnum]
        attr_accessor :gop_frame_count
      
        # The height of the video in pixels. Must be an even integer. When not specified,
        # the height is adjusted to match the specified width and input aspect ratio.
        # If both are omitted, the input height is used. For portrait videos that
        # contain horizontal ASR and rotation metadata, provide the height, in pixels,
        # per the horizontal ASR. The API calculates the width per the horizontal ASR.
        # The API detects any rotation metadata and swaps the requested height and width
        # for the output.
        # Corresponds to the JSON property `heightPixels`
        # @return [Fixnum]
        attr_accessor :height_pixels
      
        # Pixel format to use. The default is `yuv420p`. Supported pixel formats: - `
        # yuv420p` pixel format - `yuv422p` pixel format - `yuv444p` pixel format - `
        # yuv420p10` 10-bit HDR pixel format - `yuv422p10` 10-bit HDR pixel format - `
        # yuv444p10` 10-bit HDR pixel format - `yuv420p12` 12-bit HDR pixel format - `
        # yuv422p12` 12-bit HDR pixel format - `yuv444p12` 12-bit HDR pixel format
        # Corresponds to the JSON property `pixelFormat`
        # @return [String]
        attr_accessor :pixel_format
      
        # Enforces the specified codec profile. The following profiles are supported: * `
        # profile0` (default) * `profile1` * `profile2` * `profile3` The available
        # options are [WebM-compatible](https://www.webmproject.org/vp9/profiles/). Note
        # that certain values for this field may cause the transcoder to override other
        # fields you set in the `Vp9CodecSettings` message.
        # Corresponds to the JSON property `profile`
        # @return [String]
        attr_accessor :profile
      
        # Specify the mode. The default is `vbr`. Supported rate control modes: - `vbr` -
        # variable bitrate
        # Corresponds to the JSON property `rateControlMode`
        # @return [String]
        attr_accessor :rate_control_mode
      
        # The width of the video in pixels. Must be an even integer. When not specified,
        # the width is adjusted to match the specified height and input aspect ratio. If
        # both are omitted, the input width is used. For portrait videos that contain
        # horizontal ASR and rotation metadata, provide the width, in pixels, per the
        # horizontal ASR. The API calculates the height per the horizontal ASR. The API
        # detects any rotation metadata and swaps the requested height and width for the
        # output.
        # Corresponds to the JSON property `widthPixels`
        # @return [Fixnum]
        attr_accessor :width_pixels
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @bitrate_bps = args[:bitrate_bps] if args.key?(:bitrate_bps)
          @crf_level = args[:crf_level] if args.key?(:crf_level)
          @frame_rate = args[:frame_rate] if args.key?(:frame_rate)
          @gop_duration = args[:gop_duration] if args.key?(:gop_duration)
          @gop_frame_count = args[:gop_frame_count] if args.key?(:gop_frame_count)
          @height_pixels = args[:height_pixels] if args.key?(:height_pixels)
          @pixel_format = args[:pixel_format] if args.key?(:pixel_format)
          @profile = args[:profile] if args.key?(:profile)
          @rate_control_mode = args[:rate_control_mode] if args.key?(:rate_control_mode)
          @width_pixels = args[:width_pixels] if args.key?(:width_pixels)
        end
      end
      
      # Widevine configuration.
      class Widevine
        include Google::Apis::Core::Hashable
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
        end
      end
      
      # Yet Another Deinterlacing Filter Configuration.
      class YadifConfig
        include Google::Apis::Core::Hashable
      
        # Deinterlace all frames rather than just the frames identified as interlaced.
        # The default is `false`.
        # Corresponds to the JSON property `deinterlaceAllFrames`
        # @return [Boolean]
        attr_accessor :deinterlace_all_frames
        alias_method :deinterlace_all_frames?, :deinterlace_all_frames
      
        # Disable spacial interlacing. The default is `false`.
        # Corresponds to the JSON property `disableSpatialInterlacing`
        # @return [Boolean]
        attr_accessor :disable_spatial_interlacing
        alias_method :disable_spatial_interlacing?, :disable_spatial_interlacing
      
        # Specifies the deinterlacing mode to adopt. The default is `send_frame`.
        # Supported values: - `send_frame`: Output one frame for each frame - `
        # send_field`: Output one frame for each field
        # Corresponds to the JSON property `mode`
        # @return [String]
        attr_accessor :mode
      
        # The picture field parity assumed for the input interlaced video. The default
        # is `auto`. Supported values: - `tff`: Assume the top field is first - `bff`:
        # Assume the bottom field is first - `auto`: Enable automatic detection of field
        # parity
        # Corresponds to the JSON property `parity`
        # @return [String]
        attr_accessor :parity
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @deinterlace_all_frames = args[:deinterlace_all_frames] if args.key?(:deinterlace_all_frames)
          @disable_spatial_interlacing = args[:disable_spatial_interlacing] if args.key?(:disable_spatial_interlacing)
          @mode = args[:mode] if args.key?(:mode)
          @parity = args[:parity] if args.key?(:parity)
        end
      end
    end
  end
end