# frozen_string_literal: true
# Copyright (c) 2017-2018 THL A29 Limited, a Tencent company. All Rights Reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
module TencentCloud
module Dc
module V20180410
# AcceptDirectConnectTunnel请求参数结构体
class AcceptDirectConnectTunnelRequest < TencentCloud::Common::AbstractModel
# @param DirectConnectTunnelId: 物理专线拥有者接受共享专用通道申请
# @type DirectConnectTunnelId: String
attr_accessor :DirectConnectTunnelId
def initialize(directconnecttunnelid=nil)
@DirectConnectTunnelId = directconnecttunnelid
end
def deserialize(params)
@DirectConnectTunnelId = params['DirectConnectTunnelId']
end
end
# AcceptDirectConnectTunnel返回参数结构体
class AcceptDirectConnectTunnelResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# 接入点信息。
class AccessPoint < TencentCloud::Common::AbstractModel
# @param AccessPointName: 接入点的名称。
# @type AccessPointName: String
# @param AccessPointId: 接入点唯一ID。
# @type AccessPointId: String
# @param State: 接入点的状态。可用，不可用。
# @type State: String
# @param Location: 接入点的位置。
# @type Location: String
# @param LineOperator: 接入点支持的运营商列表。
# @type LineOperator: Array
# @param RegionId: 接入点管理的大区ID。
# @type RegionId: String
# @param AvailablePortType: 接入点可用的端口类型列表。1000BASE-T代表千兆电口，1000BASE-LX代表千兆单模光口10km，1000BASE-ZX代表千兆单模光口80km,10GBASE-LR代表万兆单模光口10km,10GBASE-ZR代表万兆单模光口80km,10GBASE-LH代表万兆单模光口40km,100GBASE-LR4代表100G单模光口10km
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AvailablePortType: Array
# @param Coordinate: 接入点经纬度
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Coordinate: :class:`Tencentcloud::Dc.v20180410.models.Coordinate`
# @param City: 接入点所在城市
# 注意：此字段可能返回 null，表示取不到有效值。
# @type City: String
# @param Area: 接入点地域名称
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Area: String
# @param AccessPointType: 接入点类型。VXLAN/QCPL/QCAR
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AccessPointType: String
attr_accessor :AccessPointName, :AccessPointId, :State, :Location, :LineOperator, :RegionId, :AvailablePortType, :Coordinate, :City, :Area, :AccessPointType
def initialize(accesspointname=nil, accesspointid=nil, state=nil, location=nil, lineoperator=nil, regionid=nil, availableporttype=nil, coordinate=nil, city=nil, area=nil, accesspointtype=nil)
@AccessPointName = accesspointname
@AccessPointId = accesspointid
@State = state
@Location = location
@LineOperator = lineoperator
@RegionId = regionid
@AvailablePortType = availableporttype
@Coordinate = coordinate
@City = city
@Area = area
@AccessPointType = accesspointtype
end
def deserialize(params)
@AccessPointName = params['AccessPointName']
@AccessPointId = params['AccessPointId']
@State = params['State']
@Location = params['Location']
@LineOperator = params['LineOperator']
@RegionId = params['RegionId']
@AvailablePortType = params['AvailablePortType']
unless params['Coordinate'].nil?
@Coordinate = Coordinate.new
@Coordinate.deserialize(params['Coordinate'])
end
@City = params['City']
@Area = params['Area']
@AccessPointType = params['AccessPointType']
end
end
# ApplyInternetAddress请求参数结构体
class ApplyInternetAddressRequest < TencentCloud::Common::AbstractModel
# @param MaskLen: CIDR地址掩码长度
# @type MaskLen: Integer
# @param AddrType: 0:BGP类型地址
# 1：中国电信
# 2：中国移动
# 3：中国联通
# @type AddrType: Integer
# @param AddrProto: 0：IPv4
# 1:IPv6
# @type AddrProto: Integer
attr_accessor :MaskLen, :AddrType, :AddrProto
def initialize(masklen=nil, addrtype=nil, addrproto=nil)
@MaskLen = masklen
@AddrType = addrtype
@AddrProto = addrproto
end
def deserialize(params)
@MaskLen = params['MaskLen']
@AddrType = params['AddrType']
@AddrProto = params['AddrProto']
end
end
# ApplyInternetAddress返回参数结构体
class ApplyInternetAddressResponse < TencentCloud::Common::AbstractModel
# @param InstanceId: 互联网公网地址ID
# 注意：此字段可能返回 null，表示取不到有效值。
# @type InstanceId: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :InstanceId, :RequestId
def initialize(instanceid=nil, requestid=nil)
@InstanceId = instanceid
@RequestId = requestid
end
def deserialize(params)
@InstanceId = params['InstanceId']
@RequestId = params['RequestId']
end
end
# BFD配置信息
class BFDInfo < TencentCloud::Common::AbstractModel
# @param ProbeFailedTimes: 健康检查次数
# @type ProbeFailedTimes: Integer
# @param Interval: 健康检查间隔
# @type Interval: Integer
attr_accessor :ProbeFailedTimes, :Interval
def initialize(probefailedtimes=nil, interval=nil)
@ProbeFailedTimes = probefailedtimes
@Interval = interval
end
def deserialize(params)
@ProbeFailedTimes = params['ProbeFailedTimes']
@Interval = params['Interval']
end
end
# bgp状态信息
class BGPStatus < TencentCloud::Common::AbstractModel
# @param TencentAddressBgpState: 腾讯侧主互联IP BGP状态
# @type TencentAddressBgpState: String
# @param TencentBackupAddressBgpState: 腾讯侧备互联IP BGP状态
# @type TencentBackupAddressBgpState: String
attr_accessor :TencentAddressBgpState, :TencentBackupAddressBgpState
def initialize(tencentaddressbgpstate=nil, tencentbackupaddressbgpstate=nil)
@TencentAddressBgpState = tencentaddressbgpstate
@TencentBackupAddressBgpState = tencentbackupaddressbgpstate
end
def deserialize(params)
@TencentAddressBgpState = params['TencentAddressBgpState']
@TencentBackupAddressBgpState = params['TencentBackupAddressBgpState']
end
end
# bgp参数，包括Asn，AuthKey
class BgpPeer < TencentCloud::Common::AbstractModel
# @param Asn: 用户侧，BGP Asn
# @type Asn: Integer
# @param AuthKey: 用户侧BGP密钥
# @type AuthKey: String
attr_accessor :Asn, :AuthKey
def initialize(asn=nil, authkey=nil)
@Asn = asn
@AuthKey = authkey
end
def deserialize(params)
@Asn = params['Asn']
@AuthKey = params['AuthKey']
end
end
# 坐标，经维度描述
class Coordinate < TencentCloud::Common::AbstractModel
# @param Lat: 纬度
# @type Lat: Float
# @param Lng: 经度
# @type Lng: Float
attr_accessor :Lat, :Lng
def initialize(lat=nil, lng=nil)
@Lat = lat
@Lng = lng
end
def deserialize(params)
@Lat = params['Lat']
@Lng = params['Lng']
end
end
# CreateDirectConnect请求参数结构体
class CreateDirectConnectRequest < TencentCloud::Common::AbstractModel
# @param DirectConnectName: 物理专线的名称。
# @type DirectConnectName: String
# @param AccessPointId: 物理专线所在的接入点。
# 您可以通过调用 DescribeAccessPoints接口获取地域ID。所选择的接入点必须存在且处于可接入的状态。
# @type AccessPointId: String
# @param LineOperator: 提供接入物理专线的运营商。ChinaTelecom：中国电信， ChinaMobile：中国移动，ChinaUnicom：中国联通， In-houseWiring：楼内线，ChinaOther：中国其他， InternationalOperator：境外其他。
# @type LineOperator: String
# @param PortType: 物理专线接入端口类型,取值：100Base-T：百兆电口,1000Base-T（默认值）：千兆电口,1000Base-LX：千兆单模光口（10千米）,10GBase-T：万兆电口10GBase-LR：万兆单模光口（10千米），默认值，千兆单模光口（10千米）。
# @type PortType: String
# @param CircuitCode: 运营商或者服务商为物理专线提供的电路编码。
# @type CircuitCode: String
# @param Location: 本地数据中心的地理位置。
# @type Location: String
# @param Bandwidth: 物理专线接入接口带宽，单位为Mbps，默认值为1000，取值范围为 [2, 10240]。
# @type Bandwidth: Integer
# @param RedundantDirectConnectId: 冗余物理专线的ID。
# @type RedundantDirectConnectId: String
# @param Vlan: 物理专线调试VLAN。默认开启VLAN，自动分配VLAN。
# @type Vlan: Integer
# @param TencentAddress: 物理专线调试腾讯侧互联 IP。默认自动分配。
# @type TencentAddress: String
# @param CustomerAddress: 物理专线调试用户侧互联 IP。默认自动分配。
# @type CustomerAddress: String
# @param CustomerName: 物理专线申请者姓名。默认从账户体系获取。
# @type CustomerName: String
# @param CustomerContactMail: 物理专线申请者联系邮箱。默认从账户体系获取。
# @type CustomerContactMail: String
# @param CustomerContactNumber: 物理专线申请者联系号码。默认从账户体系获取。
# @type CustomerContactNumber: String
# @param FaultReportContactPerson: 报障联系人。
# @type FaultReportContactPerson: String
# @param FaultReportContactNumber: 报障联系电话。
# @type FaultReportContactNumber: String
# @param SignLaw: 物理专线申请者是否签署了用户使用协议。默认已签署
# @type SignLaw: Boolean
attr_accessor :DirectConnectName, :AccessPointId, :LineOperator, :PortType, :CircuitCode, :Location, :Bandwidth, :RedundantDirectConnectId, :Vlan, :TencentAddress, :CustomerAddress, :CustomerName, :CustomerContactMail, :CustomerContactNumber, :FaultReportContactPerson, :FaultReportContactNumber, :SignLaw
def initialize(directconnectname=nil, accesspointid=nil, lineoperator=nil, porttype=nil, circuitcode=nil, location=nil, bandwidth=nil, redundantdirectconnectid=nil, vlan=nil, tencentaddress=nil, customeraddress=nil, customername=nil, customercontactmail=nil, customercontactnumber=nil, faultreportcontactperson=nil, faultreportcontactnumber=nil, signlaw=nil)
@DirectConnectName = directconnectname
@AccessPointId = accesspointid
@LineOperator = lineoperator
@PortType = porttype
@CircuitCode = circuitcode
@Location = location
@Bandwidth = bandwidth
@RedundantDirectConnectId = redundantdirectconnectid
@Vlan = vlan
@TencentAddress = tencentaddress
@CustomerAddress = customeraddress
@CustomerName = customername
@CustomerContactMail = customercontactmail
@CustomerContactNumber = customercontactnumber
@FaultReportContactPerson = faultreportcontactperson
@FaultReportContactNumber = faultreportcontactnumber
@SignLaw = signlaw
end
def deserialize(params)
@DirectConnectName = params['DirectConnectName']
@AccessPointId = params['AccessPointId']
@LineOperator = params['LineOperator']
@PortType = params['PortType']
@CircuitCode = params['CircuitCode']
@Location = params['Location']
@Bandwidth = params['Bandwidth']
@RedundantDirectConnectId = params['RedundantDirectConnectId']
@Vlan = params['Vlan']
@TencentAddress = params['TencentAddress']
@CustomerAddress = params['CustomerAddress']
@CustomerName = params['CustomerName']
@CustomerContactMail = params['CustomerContactMail']
@CustomerContactNumber = params['CustomerContactNumber']
@FaultReportContactPerson = params['FaultReportContactPerson']
@FaultReportContactNumber = params['FaultReportContactNumber']
@SignLaw = params['SignLaw']
end
end
# CreateDirectConnect返回参数结构体
class CreateDirectConnectResponse < TencentCloud::Common::AbstractModel
# @param DirectConnectIdSet: 物理专线的ID。
# @type DirectConnectIdSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :DirectConnectIdSet, :RequestId
def initialize(directconnectidset=nil, requestid=nil)
@DirectConnectIdSet = directconnectidset
@RequestId = requestid
end
def deserialize(params)
@DirectConnectIdSet = params['DirectConnectIdSet']
@RequestId = params['RequestId']
end
end
# CreateDirectConnectTunnel请求参数结构体
class CreateDirectConnectTunnelRequest < TencentCloud::Common::AbstractModel
# @param DirectConnectId: 专线 ID，例如：dc-kd7d06of
# @type DirectConnectId: String
# @param DirectConnectTunnelName: 专用通道名称
# @type DirectConnectTunnelName: String
# @param DirectConnectOwnerAccount: 物理专线 owner，缺省为当前客户（物理专线 owner）
# 共享专线时这里需要填写共享专线的开发商账号 ID
# @type DirectConnectOwnerAccount: String
# @param NetworkType: 网络类型，分别为VPC、BMVPC，CCN，默认是VPC
# VPC：私有网络
# BMVPC：黑石网络
# CCN：云联网
# @type NetworkType: String
# @param NetworkRegion: 网络地域
# @type NetworkRegion: String
# @param VpcId: 私有网络统一 ID 或者黑石网络统一 ID
# @type VpcId: String
# @param DirectConnectGatewayId: 专线网关 ID，例如 dcg-d545ddf
# @type DirectConnectGatewayId: String
# @param Bandwidth: 专线带宽，单位：Mbps
# 默认是物理专线带宽值
# @type Bandwidth: Integer
# @param RouteType: BGP ：BGP路由
# STATIC：静态
# 默认为 BGP 路由
# @type RouteType: String
# @param BgpPeer: BgpPeer，用户侧bgp信息，包括Asn和AuthKey
# @type BgpPeer: :class:`Tencentcloud::Dc.v20180410.models.BgpPeer`
# @param RouteFilterPrefixes: 静态路由，用户IDC的网段地址
# @type RouteFilterPrefixes: Array
# @param Vlan: vlan，范围：0 ~ 3000
# 0：不开启子接口
# 默认值是非0
# @type Vlan: Integer
# @param TencentAddress: TencentAddress，腾讯侧互联 IP
# @type TencentAddress: String
# @param CustomerAddress: CustomerAddress，用户侧互联 IP
# @type CustomerAddress: String
# @param TencentBackupAddress: TencentBackupAddress，腾讯侧备用互联 IP
# @type TencentBackupAddress: String
# @param CloudAttachId: 高速上云服务ID
# @type CloudAttachId: String
attr_accessor :DirectConnectId, :DirectConnectTunnelName, :DirectConnectOwnerAccount, :NetworkType, :NetworkRegion, :VpcId, :DirectConnectGatewayId, :Bandwidth, :RouteType, :BgpPeer, :RouteFilterPrefixes, :Vlan, :TencentAddress, :CustomerAddress, :TencentBackupAddress, :CloudAttachId
def initialize(directconnectid=nil, directconnecttunnelname=nil, directconnectowneraccount=nil, networktype=nil, networkregion=nil, vpcid=nil, directconnectgatewayid=nil, bandwidth=nil, routetype=nil, bgppeer=nil, routefilterprefixes=nil, vlan=nil, tencentaddress=nil, customeraddress=nil, tencentbackupaddress=nil, cloudattachid=nil)
@DirectConnectId = directconnectid
@DirectConnectTunnelName = directconnecttunnelname
@DirectConnectOwnerAccount = directconnectowneraccount
@NetworkType = networktype
@NetworkRegion = networkregion
@VpcId = vpcid
@DirectConnectGatewayId = directconnectgatewayid
@Bandwidth = bandwidth
@RouteType = routetype
@BgpPeer = bgppeer
@RouteFilterPrefixes = routefilterprefixes
@Vlan = vlan
@TencentAddress = tencentaddress
@CustomerAddress = customeraddress
@TencentBackupAddress = tencentbackupaddress
@CloudAttachId = cloudattachid
end
def deserialize(params)
@DirectConnectId = params['DirectConnectId']
@DirectConnectTunnelName = params['DirectConnectTunnelName']
@DirectConnectOwnerAccount = params['DirectConnectOwnerAccount']
@NetworkType = params['NetworkType']
@NetworkRegion = params['NetworkRegion']
@VpcId = params['VpcId']
@DirectConnectGatewayId = params['DirectConnectGatewayId']
@Bandwidth = params['Bandwidth']
@RouteType = params['RouteType']
unless params['BgpPeer'].nil?
@BgpPeer = BgpPeer.new
@BgpPeer.deserialize(params['BgpPeer'])
end
unless params['RouteFilterPrefixes'].nil?
@RouteFilterPrefixes = []
params['RouteFilterPrefixes'].each do |i|
routefilterprefix_tmp = RouteFilterPrefix.new
routefilterprefix_tmp.deserialize(i)
@RouteFilterPrefixes << routefilterprefix_tmp
end
end
@Vlan = params['Vlan']
@TencentAddress = params['TencentAddress']
@CustomerAddress = params['CustomerAddress']
@TencentBackupAddress = params['TencentBackupAddress']
@CloudAttachId = params['CloudAttachId']
end
end
# CreateDirectConnectTunnel返回参数结构体
class CreateDirectConnectTunnelResponse < TencentCloud::Common::AbstractModel
# @param DirectConnectTunnelIdSet: 专用通道ID
# @type DirectConnectTunnelIdSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :DirectConnectTunnelIdSet, :RequestId
def initialize(directconnecttunnelidset=nil, requestid=nil)
@DirectConnectTunnelIdSet = directconnecttunnelidset
@RequestId = requestid
end
def deserialize(params)
@DirectConnectTunnelIdSet = params['DirectConnectTunnelIdSet']
@RequestId = params['RequestId']
end
end
# DeleteDirectConnect请求参数结构体
class DeleteDirectConnectRequest < TencentCloud::Common::AbstractModel
# @param DirectConnectId: 物理专线的ID。
# @type DirectConnectId: String
attr_accessor :DirectConnectId
def initialize(directconnectid=nil)
@DirectConnectId = directconnectid
end
def deserialize(params)
@DirectConnectId = params['DirectConnectId']
end
end
# DeleteDirectConnect返回参数结构体
class DeleteDirectConnectResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteDirectConnectTunnel请求参数结构体
class DeleteDirectConnectTunnelRequest < TencentCloud::Common::AbstractModel
# @param DirectConnectTunnelId: 专用通道ID
# @type DirectConnectTunnelId: String
attr_accessor :DirectConnectTunnelId
def initialize(directconnecttunnelid=nil)
@DirectConnectTunnelId = directconnecttunnelid
end
def deserialize(params)
@DirectConnectTunnelId = params['DirectConnectTunnelId']
end
end
# DeleteDirectConnectTunnel返回参数结构体
class DeleteDirectConnectTunnelResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DescribeAccessPoints请求参数结构体
class DescribeAccessPointsRequest < TencentCloud::Common::AbstractModel
# @param RegionId: 接入点所在的地域。使用DescribeRegions查询
# 您可以通过调用 DescribeRegions接口获取地域ID。
# @type RegionId: String
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
# @param Limit: 返回数量，默认为20，最大值为100。
# @type Limit: Integer
attr_accessor :RegionId, :Offset, :Limit
def initialize(regionid=nil, offset=nil, limit=nil)
@RegionId = regionid
@Offset = offset
@Limit = limit
end
def deserialize(params)
@RegionId = params['RegionId']
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribeAccessPoints返回参数结构体
class DescribeAccessPointsResponse < TencentCloud::Common::AbstractModel
# @param AccessPointSet: 接入点信息。
# @type AccessPointSet: Array
# @param TotalCount: 符合接入点数量。
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :AccessPointSet, :TotalCount, :RequestId
def initialize(accesspointset=nil, totalcount=nil, requestid=nil)
@AccessPointSet = accesspointset
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['AccessPointSet'].nil?
@AccessPointSet = []
params['AccessPointSet'].each do |i|
accesspoint_tmp = AccessPoint.new
accesspoint_tmp.deserialize(i)
@AccessPointSet << accesspoint_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeDirectConnectTunnelExtra请求参数结构体
class DescribeDirectConnectTunnelExtraRequest < TencentCloud::Common::AbstractModel
# @param DirectConnectTunnelId: 专用通道ID
# @type DirectConnectTunnelId: String
attr_accessor :DirectConnectTunnelId
def initialize(directconnecttunnelid=nil)
@DirectConnectTunnelId = directconnecttunnelid
end
def deserialize(params)
@DirectConnectTunnelId = params['DirectConnectTunnelId']
end
end
# DescribeDirectConnectTunnelExtra返回参数结构体
class DescribeDirectConnectTunnelExtraResponse < TencentCloud::Common::AbstractModel
# @param DirectConnectTunnelExtra: 专用通道扩展信息
# @type DirectConnectTunnelExtra: :class:`Tencentcloud::Dc.v20180410.models.DirectConnectTunnelExtra`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :DirectConnectTunnelExtra, :RequestId
def initialize(directconnecttunnelextra=nil, requestid=nil)
@DirectConnectTunnelExtra = directconnecttunnelextra
@RequestId = requestid
end
def deserialize(params)
unless params['DirectConnectTunnelExtra'].nil?
@DirectConnectTunnelExtra = DirectConnectTunnelExtra.new
@DirectConnectTunnelExtra.deserialize(params['DirectConnectTunnelExtra'])
end
@RequestId = params['RequestId']
end
end
# DescribeDirectConnectTunnels请求参数结构体
class DescribeDirectConnectTunnelsRequest < TencentCloud::Common::AbstractModel
# @param Filters: 过滤条件:
# 参数不支持同时指定DirectConnectTunnelIds和Filters。
# direct-connect-tunnel-name, 专用通道名称。
# direct-connect-tunnel-id, 专用通道实例ID，如dcx-abcdefgh。
# direct-connect-id, 物理专线实例ID，如，dc-abcdefgh。
# @type Filters: Array
# @param DirectConnectTunnelIds: 专用通道 ID数组
# @type DirectConnectTunnelIds: Array
# @param Offset: 偏移量，默认为0
# @type Offset: Integer
# @param Limit: 返回数量，默认为20，最大值为100
# @type Limit: Integer
attr_accessor :Filters, :DirectConnectTunnelIds, :Offset, :Limit
def initialize(filters=nil, directconnecttunnelids=nil, offset=nil, limit=nil)
@Filters = filters
@DirectConnectTunnelIds = directconnecttunnelids
@Offset = offset
@Limit = limit
end
def deserialize(params)
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
@DirectConnectTunnelIds = params['DirectConnectTunnelIds']
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribeDirectConnectTunnels返回参数结构体
class DescribeDirectConnectTunnelsResponse < TencentCloud::Common::AbstractModel
# @param DirectConnectTunnelSet: 专用通道列表
# @type DirectConnectTunnelSet: Array
# @param TotalCount: 符合专用通道数量。
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :DirectConnectTunnelSet, :TotalCount, :RequestId
def initialize(directconnecttunnelset=nil, totalcount=nil, requestid=nil)
@DirectConnectTunnelSet = directconnecttunnelset
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['DirectConnectTunnelSet'].nil?
@DirectConnectTunnelSet = []
params['DirectConnectTunnelSet'].each do |i|
directconnecttunnel_tmp = DirectConnectTunnel.new
directconnecttunnel_tmp.deserialize(i)
@DirectConnectTunnelSet << directconnecttunnel_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeDirectConnects请求参数结构体
class DescribeDirectConnectsRequest < TencentCloud::Common::AbstractModel
# @param Filters: 过滤条件:
# @type Filters: Array
# @param DirectConnectIds: 物理专线 ID数组
# @type DirectConnectIds: Array
# @param Offset: 偏移量，默认为0
# @type Offset: Integer
# @param Limit: 返回数量，默认为20，最大值为100
# @type Limit: Integer
attr_accessor :Filters, :DirectConnectIds, :Offset, :Limit
def initialize(filters=nil, directconnectids=nil, offset=nil, limit=nil)
@Filters = filters
@DirectConnectIds = directconnectids
@Offset = offset
@Limit = limit
end
def deserialize(params)
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
@DirectConnectIds = params['DirectConnectIds']
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribeDirectConnects返回参数结构体
class DescribeDirectConnectsResponse < TencentCloud::Common::AbstractModel
# @param DirectConnectSet: 物理专线列表。
# @type DirectConnectSet: Array
# @param TotalCount: 符合物理专线列表数量。
# @type TotalCount: Integer
# @param AllSignLaw: 用户名下物理专线是否都签署了用户协议
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AllSignLaw: Boolean
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :DirectConnectSet, :TotalCount, :AllSignLaw, :RequestId
def initialize(directconnectset=nil, totalcount=nil, allsignlaw=nil, requestid=nil)
@DirectConnectSet = directconnectset
@TotalCount = totalcount
@AllSignLaw = allsignlaw
@RequestId = requestid
end
def deserialize(params)
unless params['DirectConnectSet'].nil?
@DirectConnectSet = []
params['DirectConnectSet'].each do |i|
directconnect_tmp = DirectConnect.new
directconnect_tmp.deserialize(i)
@DirectConnectSet << directconnect_tmp
end
end
@TotalCount = params['TotalCount']
@AllSignLaw = params['AllSignLaw']
@RequestId = params['RequestId']
end
end
# DescribeInternetAddressQuota请求参数结构体
class DescribeInternetAddressQuotaRequest < TencentCloud::Common::AbstractModel
def initialize()
end
def deserialize(params)
end
end
# DescribeInternetAddressQuota返回参数结构体
class DescribeInternetAddressQuotaResponse < TencentCloud::Common::AbstractModel
# @param Ipv6PrefixLen: IPv6互联网公网允许的最小前缀长度
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Ipv6PrefixLen: Integer
# @param Ipv4BgpQuota: BGP类型IPv4互联网地址配额
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Ipv4BgpQuota: Integer
# @param Ipv4OtherQuota: 非BGP类型IPv4互联网地址配额
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Ipv4OtherQuota: Integer
# @param Ipv4BgpNum: BGP类型IPv4互联网地址已使用数量
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Ipv4BgpNum: Integer
# @param Ipv4OtherNum: 非BGP类型互联网地址已使用数量
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Ipv4OtherNum: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Ipv6PrefixLen, :Ipv4BgpQuota, :Ipv4OtherQuota, :Ipv4BgpNum, :Ipv4OtherNum, :RequestId
def initialize(ipv6prefixlen=nil, ipv4bgpquota=nil, ipv4otherquota=nil, ipv4bgpnum=nil, ipv4othernum=nil, requestid=nil)
@Ipv6PrefixLen = ipv6prefixlen
@Ipv4BgpQuota = ipv4bgpquota
@Ipv4OtherQuota = ipv4otherquota
@Ipv4BgpNum = ipv4bgpnum
@Ipv4OtherNum = ipv4othernum
@RequestId = requestid
end
def deserialize(params)
@Ipv6PrefixLen = params['Ipv6PrefixLen']
@Ipv4BgpQuota = params['Ipv4BgpQuota']
@Ipv4OtherQuota = params['Ipv4OtherQuota']
@Ipv4BgpNum = params['Ipv4BgpNum']
@Ipv4OtherNum = params['Ipv4OtherNum']
@RequestId = params['RequestId']
end
end
# DescribeInternetAddress请求参数结构体
class DescribeInternetAddressRequest < TencentCloud::Common::AbstractModel
# @param Offset: 偏移量，默认为0
# @type Offset: Integer
# @param Limit: 返回数量，默认为20，最大值100
# @type Limit: Integer
# @param Filters: 过滤条件：
# AddrType, 地址类型。0：BGP 1; 1: 电信， 2：移动， 3：联通
# AddrProto地址类型。0：IPv4 1:IPv6
# Status 地址状态。 0：使用中， 1：已停用， 2：已退还
# Subnet 互联网公网地址，数组
# 互联网公网地址ID，数组
# @type Filters: Array
attr_accessor :Offset, :Limit, :Filters
def initialize(offset=nil, limit=nil, filters=nil)
@Offset = offset
@Limit = limit
@Filters = filters
end
def deserialize(params)
@Offset = params['Offset']
@Limit = params['Limit']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
end
end
# DescribeInternetAddress返回参数结构体
class DescribeInternetAddressResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 互联网公网地址数量
# @type TotalCount: Integer
# @param Subnets: 互联网公网地址列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Subnets: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :Subnets, :RequestId
def initialize(totalcount=nil, subnets=nil, requestid=nil)
@TotalCount = totalcount
@Subnets = subnets
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['Subnets'].nil?
@Subnets = []
params['Subnets'].each do |i|
internetaddressdetail_tmp = InternetAddressDetail.new
internetaddressdetail_tmp.deserialize(i)
@Subnets << internetaddressdetail_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeInternetAddressStatistics请求参数结构体
class DescribeInternetAddressStatisticsRequest < TencentCloud::Common::AbstractModel
def initialize()
end
def deserialize(params)
end
end
# DescribeInternetAddressStatistics返回参数结构体
class DescribeInternetAddressStatisticsResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 互联网公网地址统计信息数量
# @type TotalCount: Integer
# @param InternetAddressStatistics: 互联网公网地址统计信息列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type InternetAddressStatistics: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :InternetAddressStatistics, :RequestId
def initialize(totalcount=nil, internetaddressstatistics=nil, requestid=nil)
@TotalCount = totalcount
@InternetAddressStatistics = internetaddressstatistics
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['InternetAddressStatistics'].nil?
@InternetAddressStatistics = []
params['InternetAddressStatistics'].each do |i|
internetaddressstatistics_tmp = InternetAddressStatistics.new
internetaddressstatistics_tmp.deserialize(i)
@InternetAddressStatistics << internetaddressstatistics_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribePublicDirectConnectTunnelRoutes请求参数结构体
class DescribePublicDirectConnectTunnelRoutesRequest < TencentCloud::Common::AbstractModel
# @param DirectConnectTunnelId: 专用通道ID
# @type DirectConnectTunnelId: String
# @param Filters: 过滤条件：
# route-type：路由类型，取值：BGP/STATIC
# route-subnet：路由cidr，取值如：192.68.1.0/24
# @type Filters: Array
# @param Offset: 偏移量，默认为0
# @type Offset: Integer
# @param Limit: 返回数量，默认为20，最大值为100
# @type Limit: Integer
attr_accessor :DirectConnectTunnelId, :Filters, :Offset, :Limit
def initialize(directconnecttunnelid=nil, filters=nil, offset=nil, limit=nil)
@DirectConnectTunnelId = directconnecttunnelid
@Filters = filters
@Offset = offset
@Limit = limit
end
def deserialize(params)
@DirectConnectTunnelId = params['DirectConnectTunnelId']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribePublicDirectConnectTunnelRoutes返回参数结构体
class DescribePublicDirectConnectTunnelRoutesResponse < TencentCloud::Common::AbstractModel
# @param Routes: 互联网通道路由列表
# @type Routes: Array
# @param TotalCount: 记录总数
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Routes, :TotalCount, :RequestId
def initialize(routes=nil, totalcount=nil, requestid=nil)
@Routes = routes
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['Routes'].nil?
@Routes = []
params['Routes'].each do |i|
directconnecttunnelroute_tmp = DirectConnectTunnelRoute.new
directconnecttunnelroute_tmp.deserialize(i)
@Routes << directconnecttunnelroute_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# 物理专线信息列表
class DirectConnect < TencentCloud::Common::AbstractModel
# @param DirectConnectId: 物理专线ID。
# @type DirectConnectId: String
# @param DirectConnectName: 物理专线的名称。
# @type DirectConnectName: String
# @param AccessPointId: 物理专线的接入点ID。
# @type AccessPointId: String
# @param State: 物理专线的状态。
# 申请中：PENDING
# 申请驳回：REJECTED
# 待付款：TOPAY
# 已付款：PAID
# 建设中：ALLOCATED
# 已开通：AVAILABLE
# 删除中 ：DELETING
# 已删除：DELETED 。
# @type State: String
# @param CreatedTime: 物理专线创建时间。
# @type CreatedTime: String
# @param EnabledTime: 物理专线的开通时间。
# @type EnabledTime: String
# @param LineOperator: 提供接入物理专线的运营商。ChinaTelecom：中国电信， ChinaMobile：中国移动，ChinaUnicom：中国联通， In-houseWiring：楼内线，ChinaOther：中国其他， InternationalOperator：境外其他。
# @type LineOperator: String
# @param Location: 本地数据中心的地理位置。
# @type Location: String
# @param Bandwidth: 物理专线接入接口带宽，单位为Mbps。
# @type Bandwidth: Integer
# @param PortType: 用户侧物理专线接入端口类型,取值：100Base-T：百兆电口,1000Base-T（默认值）：千兆电口,1000Base-LX：千兆单模光口（10千米）,10GBase-T：万兆电口10GBase-LR：万兆单模光口（10千米），默认值，千兆单模光口（10千米）
# @type PortType: String
# @param CircuitCode: 运营商或者服务商为物理专线提供的电路编码。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CircuitCode: String
# @param RedundantDirectConnectId: 冗余物理专线的ID。
# @type RedundantDirectConnectId: String
# @param Vlan: 物理专线调试VLAN。默认开启VLAN，自动分配VLAN。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Vlan: Integer
# @param TencentAddress: 物理专线调试腾讯侧互联IP。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TencentAddress: String
# @param CustomerAddress: 物理专线调试用户侧互联IP。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CustomerAddress: String
# @param CustomerName: 物理专线申请者姓名。默认从账户体系获取。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CustomerName: String
# @param CustomerContactMail: 物理专线申请者联系邮箱。默认从账户体系获取。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CustomerContactMail: String
# @param CustomerContactNumber: 物理专线申请者联系号码。默认从账户体系获取。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CustomerContactNumber: String
# @param ExpiredTime: 物理专线的过期时间。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ExpiredTime: String
# @param ChargeType: 物理专线计费类型。 NON_RECURRING_CHARGE：一次性接入费用；PREPAID_BY_YEAR：按年预付费。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ChargeType: String
# @param FaultReportContactPerson: 报障联系人。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type FaultReportContactPerson: String
# @param FaultReportContactNumber: 报障联系电话。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type FaultReportContactNumber: String
# @param TagSet: 标签键值对
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TagSet: Array
# @param AccessPointType: 物理专线的接入点类型。
# @type AccessPointType: String
# @param IdcCity: IDC所在城市
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IdcCity: String
# @param ChargeState: 计费状态
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ChargeState: String
# @param StartTime: 物理专线开通时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type StartTime: String
# @param SignLaw: 物理专线是否已签署用户协议
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SignLaw: Boolean
# @param LocalZone: 物理专线是否为LocalZone
# 注意：此字段可能返回 null，表示取不到有效值。
# @type LocalZone: Boolean
# @param VlanZeroDirectConnectTunnelCount: 该物理专线下vlan 0的专用通道数量
# 注意：此字段可能返回 null，表示取不到有效值。
# @type VlanZeroDirectConnectTunnelCount: Integer
# @param OtherVlanDirectConnectTunnelCount: 该物理专线下非vlan 0的专用通道数量
# 注意：此字段可能返回 null，表示取不到有效值。
# @type OtherVlanDirectConnectTunnelCount: Integer
# @param MinBandwidth: 物理专线最小带宽
# 注意：此字段可能返回 null，表示取不到有效值。
# @type MinBandwidth: Integer
attr_accessor :DirectConnectId, :DirectConnectName, :AccessPointId, :State, :CreatedTime, :EnabledTime, :LineOperator, :Location, :Bandwidth, :PortType, :CircuitCode, :RedundantDirectConnectId, :Vlan, :TencentAddress, :CustomerAddress, :CustomerName, :CustomerContactMail, :CustomerContactNumber, :ExpiredTime, :ChargeType, :FaultReportContactPerson, :FaultReportContactNumber, :TagSet, :AccessPointType, :IdcCity, :ChargeState, :StartTime, :SignLaw, :LocalZone, :VlanZeroDirectConnectTunnelCount, :OtherVlanDirectConnectTunnelCount, :MinBandwidth
def initialize(directconnectid=nil, directconnectname=nil, accesspointid=nil, state=nil, createdtime=nil, enabledtime=nil, lineoperator=nil, location=nil, bandwidth=nil, porttype=nil, circuitcode=nil, redundantdirectconnectid=nil, vlan=nil, tencentaddress=nil, customeraddress=nil, customername=nil, customercontactmail=nil, customercontactnumber=nil, expiredtime=nil, chargetype=nil, faultreportcontactperson=nil, faultreportcontactnumber=nil, tagset=nil, accesspointtype=nil, idccity=nil, chargestate=nil, starttime=nil, signlaw=nil, localzone=nil, vlanzerodirectconnecttunnelcount=nil, othervlandirectconnecttunnelcount=nil, minbandwidth=nil)
@DirectConnectId = directconnectid
@DirectConnectName = directconnectname
@AccessPointId = accesspointid
@State = state
@CreatedTime = createdtime
@EnabledTime = enabledtime
@LineOperator = lineoperator
@Location = location
@Bandwidth = bandwidth
@PortType = porttype
@CircuitCode = circuitcode
@RedundantDirectConnectId = redundantdirectconnectid
@Vlan = vlan
@TencentAddress = tencentaddress
@CustomerAddress = customeraddress
@CustomerName = customername
@CustomerContactMail = customercontactmail
@CustomerContactNumber = customercontactnumber
@ExpiredTime = expiredtime
@ChargeType = chargetype
@FaultReportContactPerson = faultreportcontactperson
@FaultReportContactNumber = faultreportcontactnumber
@TagSet = tagset
@AccessPointType = accesspointtype
@IdcCity = idccity
@ChargeState = chargestate
@StartTime = starttime
@SignLaw = signlaw
@LocalZone = localzone
@VlanZeroDirectConnectTunnelCount = vlanzerodirectconnecttunnelcount
@OtherVlanDirectConnectTunnelCount = othervlandirectconnecttunnelcount
@MinBandwidth = minbandwidth
end
def deserialize(params)
@DirectConnectId = params['DirectConnectId']
@DirectConnectName = params['DirectConnectName']
@AccessPointId = params['AccessPointId']
@State = params['State']
@CreatedTime = params['CreatedTime']
@EnabledTime = params['EnabledTime']
@LineOperator = params['LineOperator']
@Location = params['Location']
@Bandwidth = params['Bandwidth']
@PortType = params['PortType']
@CircuitCode = params['CircuitCode']
@RedundantDirectConnectId = params['RedundantDirectConnectId']
@Vlan = params['Vlan']
@TencentAddress = params['TencentAddress']
@CustomerAddress = params['CustomerAddress']
@CustomerName = params['CustomerName']
@CustomerContactMail = params['CustomerContactMail']
@CustomerContactNumber = params['CustomerContactNumber']
@ExpiredTime = params['ExpiredTime']
@ChargeType = params['ChargeType']
@FaultReportContactPerson = params['FaultReportContactPerson']
@FaultReportContactNumber = params['FaultReportContactNumber']
unless params['TagSet'].nil?
@TagSet = []
params['TagSet'].each do |i|
tag_tmp = Tag.new
tag_tmp.deserialize(i)
@TagSet << tag_tmp
end
end
@AccessPointType = params['AccessPointType']
@IdcCity = params['IdcCity']
@ChargeState = params['ChargeState']
@StartTime = params['StartTime']
@SignLaw = params['SignLaw']
@LocalZone = params['LocalZone']
@VlanZeroDirectConnectTunnelCount = params['VlanZeroDirectConnectTunnelCount']
@OtherVlanDirectConnectTunnelCount = params['OtherVlanDirectConnectTunnelCount']
@MinBandwidth = params['MinBandwidth']
end
end
# 专用通道信息列表
class DirectConnectTunnel < TencentCloud::Common::AbstractModel
# @param DirectConnectTunnelId: 专用通道ID
# @type DirectConnectTunnelId: String
# @param DirectConnectId: 物理专线ID
# @type DirectConnectId: String
# @param State: 专用通道状态
# AVAILABLE:就绪或者已连接
# PENDING:申请中
# ALLOCATING:配置中
# ALLOCATED:配置完成
# ALTERING:修改中
# DELETING:删除中
# DELETED:删除完成
# COMFIRMING:待接受
# REJECTED:拒绝
# @type State: String
# @param DirectConnectOwnerAccount: 物理专线的拥有者，开发商账号 ID
# @type DirectConnectOwnerAccount: String
# @param OwnerAccount: 专用通道的拥有者，开发商账号 ID
# @type OwnerAccount: String
# @param NetworkType: 网络类型，分别为VPC、BMVPC、CCN
# VPC：私有网络 ，BMVPC：黑石网络，CCN：云联网
# @type NetworkType: String
# @param NetworkRegion: VPC地域对应的网络名，如ap-guangzhou
# @type NetworkRegion: String
# @param VpcId: 私有网络统一 ID 或者黑石网络统一 ID
# @type VpcId: String
# @param DirectConnectGatewayId: 专线网关 ID
# @type DirectConnectGatewayId: String
# @param RouteType: BGP ：BGP路由 STATIC：静态 默认为 BGP 路由
# @type RouteType: String
# @param BgpPeer: 用户侧BGP，Asn，AuthKey
# @type BgpPeer: :class:`Tencentcloud::Dc.v20180410.models.BgpPeer`
# @param RouteFilterPrefixes: 用户侧网段地址
# @type RouteFilterPrefixes: Array
# @param Vlan: 专用通道的Vlan
# @type Vlan: Integer
# @param TencentAddress: TencentAddress，腾讯侧互联 IP
# @type TencentAddress: String
# @param CustomerAddress: CustomerAddress，用户侧互联 IP
# @type CustomerAddress: String
# @param DirectConnectTunnelName: 专用通道名称
# @type DirectConnectTunnelName: String
# @param CreatedTime: 专用通道创建时间
# @type CreatedTime: String
# @param Bandwidth: 专用通道带宽值
# @type Bandwidth: Integer
# @param TagSet: 专用通道标签值
# @type TagSet: Array
# @param NetDetectId: 关联的网络自定义探测ID
# 注意：此字段可能返回 null，表示取不到有效值。
# @type NetDetectId: String
# @param EnableBGPCommunity: BGP community开关
# 注意：此字段可能返回 null，表示取不到有效值。
# @type EnableBGPCommunity: Boolean
# @param NatType: 是否为Nat通道
# 注意：此字段可能返回 null，表示取不到有效值。
# @type NatType: Integer
# @param VpcRegion: VPC地域简码，如gz、cd
# 注意：此字段可能返回 null，表示取不到有效值。
# @type VpcRegion: String
# @param BfdEnable: 是否开启BFD
# 注意：此字段可能返回 null，表示取不到有效值。
# @type BfdEnable: Integer
# @param AccessPointType: 专用通道接入点类型
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AccessPointType: String
# @param DirectConnectGatewayName: 专线网关名称
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DirectConnectGatewayName: String
# @param VpcName: VPC名称
# 注意：此字段可能返回 null，表示取不到有效值。
# @type VpcName: String
# @param TencentBackupAddress: TencentBackupAddress，腾讯侧备用互联 IP
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TencentBackupAddress: String
# @param SignLaw: 专用通道关联的物理专线是否签署了用户协议
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SignLaw: Boolean
# @param CloudAttachId: 高速上云服务ID
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CloudAttachId: String
attr_accessor :DirectConnectTunnelId, :DirectConnectId, :State, :DirectConnectOwnerAccount, :OwnerAccount, :NetworkType, :NetworkRegion, :VpcId, :DirectConnectGatewayId, :RouteType, :BgpPeer, :RouteFilterPrefixes, :Vlan, :TencentAddress, :CustomerAddress, :DirectConnectTunnelName, :CreatedTime, :Bandwidth, :TagSet, :NetDetectId, :EnableBGPCommunity, :NatType, :VpcRegion, :BfdEnable, :AccessPointType, :DirectConnectGatewayName, :VpcName, :TencentBackupAddress, :SignLaw, :CloudAttachId
def initialize(directconnecttunnelid=nil, directconnectid=nil, state=nil, directconnectowneraccount=nil, owneraccount=nil, networktype=nil, networkregion=nil, vpcid=nil, directconnectgatewayid=nil, routetype=nil, bgppeer=nil, routefilterprefixes=nil, vlan=nil, tencentaddress=nil, customeraddress=nil, directconnecttunnelname=nil, createdtime=nil, bandwidth=nil, tagset=nil, netdetectid=nil, enablebgpcommunity=nil, nattype=nil, vpcregion=nil, bfdenable=nil, accesspointtype=nil, directconnectgatewayname=nil, vpcname=nil, tencentbackupaddress=nil, signlaw=nil, cloudattachid=nil)
@DirectConnectTunnelId = directconnecttunnelid
@DirectConnectId = directconnectid
@State = state
@DirectConnectOwnerAccount = directconnectowneraccount
@OwnerAccount = owneraccount
@NetworkType = networktype
@NetworkRegion = networkregion
@VpcId = vpcid
@DirectConnectGatewayId = directconnectgatewayid
@RouteType = routetype
@BgpPeer = bgppeer
@RouteFilterPrefixes = routefilterprefixes
@Vlan = vlan
@TencentAddress = tencentaddress
@CustomerAddress = customeraddress
@DirectConnectTunnelName = directconnecttunnelname
@CreatedTime = createdtime
@Bandwidth = bandwidth
@TagSet = tagset
@NetDetectId = netdetectid
@EnableBGPCommunity = enablebgpcommunity
@NatType = nattype
@VpcRegion = vpcregion
@BfdEnable = bfdenable
@AccessPointType = accesspointtype
@DirectConnectGatewayName = directconnectgatewayname
@VpcName = vpcname
@TencentBackupAddress = tencentbackupaddress
@SignLaw = signlaw
@CloudAttachId = cloudattachid
end
def deserialize(params)
@DirectConnectTunnelId = params['DirectConnectTunnelId']
@DirectConnectId = params['DirectConnectId']
@State = params['State']
@DirectConnectOwnerAccount = params['DirectConnectOwnerAccount']
@OwnerAccount = params['OwnerAccount']
@NetworkType = params['NetworkType']
@NetworkRegion = params['NetworkRegion']
@VpcId = params['VpcId']
@DirectConnectGatewayId = params['DirectConnectGatewayId']
@RouteType = params['RouteType']
unless params['BgpPeer'].nil?
@BgpPeer = BgpPeer.new
@BgpPeer.deserialize(params['BgpPeer'])
end
unless params['RouteFilterPrefixes'].nil?
@RouteFilterPrefixes = []
params['RouteFilterPrefixes'].each do |i|
routefilterprefix_tmp = RouteFilterPrefix.new
routefilterprefix_tmp.deserialize(i)
@RouteFilterPrefixes << routefilterprefix_tmp
end
end
@Vlan = params['Vlan']
@TencentAddress = params['TencentAddress']
@CustomerAddress = params['CustomerAddress']
@DirectConnectTunnelName = params['DirectConnectTunnelName']
@CreatedTime = params['CreatedTime']
@Bandwidth = params['Bandwidth']
unless params['TagSet'].nil?
@TagSet = []
params['TagSet'].each do |i|
tag_tmp = Tag.new
tag_tmp.deserialize(i)
@TagSet << tag_tmp
end
end
@NetDetectId = params['NetDetectId']
@EnableBGPCommunity = params['EnableBGPCommunity']
@NatType = params['NatType']
@VpcRegion = params['VpcRegion']
@BfdEnable = params['BfdEnable']
@AccessPointType = params['AccessPointType']
@DirectConnectGatewayName = params['DirectConnectGatewayName']
@VpcName = params['VpcName']
@TencentBackupAddress = params['TencentBackupAddress']
@SignLaw = params['SignLaw']
@CloudAttachId = params['CloudAttachId']
end
end
# 专用通道扩展信息
class DirectConnectTunnelExtra < TencentCloud::Common::AbstractModel
# @param DirectConnectTunnelId: 专用通道ID
# @type DirectConnectTunnelId: String
# @param DirectConnectId: 物理专线ID
# @type DirectConnectId: String
# @param State: 专用通道状态
# AVAILABLE:就绪或者已连接
# PENDING:申请中
# ALLOCATING:配置中
# ALLOCATED:配置完成
# ALTERING:修改中
# DELETING:删除中
# DELETED:删除完成
# COMFIRMING:待接受
# REJECTED:拒绝
# @type State: String
# @param DirectConnectOwnerAccount: 物理专线的拥有者，开发商账号 ID
# @type DirectConnectOwnerAccount: String
# @param OwnerAccount: 专用通道的拥有者，开发商账号 ID
# @type OwnerAccount: String
# @param NetworkType: 网络类型，分别为VPC、BMVPC、CCN
# VPC：私有网络 ，BMVPC：黑石网络，CCN：云联网
# @type NetworkType: String
# @param NetworkRegion: VPC地域对应的网络名，如ap-guangzhou
# @type NetworkRegion: String
# @param VpcId: 私有网络统一 ID 或者黑石网络统一 ID
# @type VpcId: String
# @param DirectConnectGatewayId: 专线网关 ID
# @type DirectConnectGatewayId: String
# @param RouteType: BGP ：BGP路由 STATIC：静态 默认为 BGP 路由
# @type RouteType: String
# @param BgpPeer: 用户侧BGP，Asn，AuthKey
# @type BgpPeer: :class:`Tencentcloud::Dc.v20180410.models.BgpPeer`
# @param RouteFilterPrefixes: 用户侧网段地址
# @type RouteFilterPrefixes: Array
# @param PublicAddresses: 互联网通道公网网段地址
# @type PublicAddresses: Array
# @param Vlan: 专用通道的Vlan
# @type Vlan: Integer
# @param TencentAddress: 腾讯侧互联 IP
# @type TencentAddress: String
# @param TencentBackupAddress: 腾讯侧备用互联IP
# @type TencentBackupAddress: String
# @param CustomerAddress: 用户侧互联 IP
# @type CustomerAddress: String
# @param DirectConnectTunnelName: 专用通道名称
# @type DirectConnectTunnelName: String
# @param CreatedTime: 专用通道创建时间
# @type CreatedTime: String
# @param Bandwidth: 专用通道带宽值
# @type Bandwidth: Integer
# @param NetDetectId: 关联的网络自定义探测ID
# @type NetDetectId: String
# @param EnableBGPCommunity: BGP community开关
# @type EnableBGPCommunity: Boolean
# @param NatType: 是否为Nat通道
# @type NatType: Integer
# @param VpcRegion: VPC地域简码，如gz、cd
# @type VpcRegion: String
# @param BfdEnable: 是否开启BFD
# @type BfdEnable: Integer
# @param NqaEnable: 是否开启NQA
# @type NqaEnable: Integer
# @param AccessPointType: 专用通道接入点类型
# @type AccessPointType: String
# @param DirectConnectGatewayName: 专线网关名称
# @type DirectConnectGatewayName: String
# @param VpcName: VPC名称
# @type VpcName: String
# @param SignLaw: 专用通道关联的物理专线是否签署了用户协议
# @type SignLaw: Boolean
# @param BfdInfo: BFD配置信息
# @type BfdInfo: :class:`Tencentcloud::Dc.v20180410.models.BFDInfo`
# @param NqaInfo: NQA配置信息
# @type NqaInfo: :class:`Tencentcloud::Dc.v20180410.models.NQAInfo`
# @param BgpStatus: BGP状态
# @type BgpStatus: :class:`Tencentcloud::Dc.v20180410.models.BGPStatus`
# @param IPv6Enable: 是否开启IPv6
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IPv6Enable: Integer
# @param TencentIPv6Address: 腾讯侧互联IPv6地址
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TencentIPv6Address: String
# @param TencentBackupIPv6Address: 腾讯侧备用互联IPv6地址
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TencentBackupIPv6Address: String
# @param BgpIPv6Status: BGPv6状态
# 注意：此字段可能返回 null，表示取不到有效值。
# @type BgpIPv6Status: :class:`Tencentcloud::Dc.v20180410.models.BGPStatus`
# @param CustomerIPv6Address: 用户侧互联IPv6地址
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CustomerIPv6Address: String
# @param JumboEnable: 专用通道是否支持巨帧。1 支持，0 不支持
# 注意：此字段可能返回 null，表示取不到有效值。
# @type JumboEnable: Integer
attr_accessor :DirectConnectTunnelId, :DirectConnectId, :State, :DirectConnectOwnerAccount, :OwnerAccount, :NetworkType, :NetworkRegion, :VpcId, :DirectConnectGatewayId, :RouteType, :BgpPeer, :RouteFilterPrefixes, :PublicAddresses, :Vlan, :TencentAddress, :TencentBackupAddress, :CustomerAddress, :DirectConnectTunnelName, :CreatedTime, :Bandwidth, :NetDetectId, :EnableBGPCommunity, :NatType, :VpcRegion, :BfdEnable, :NqaEnable, :AccessPointType, :DirectConnectGatewayName, :VpcName, :SignLaw, :BfdInfo, :NqaInfo, :BgpStatus, :IPv6Enable, :TencentIPv6Address, :TencentBackupIPv6Address, :BgpIPv6Status, :CustomerIPv6Address, :JumboEnable
def initialize(directconnecttunnelid=nil, directconnectid=nil, state=nil, directconnectowneraccount=nil, owneraccount=nil, networktype=nil, networkregion=nil, vpcid=nil, directconnectgatewayid=nil, routetype=nil, bgppeer=nil, routefilterprefixes=nil, publicaddresses=nil, vlan=nil, tencentaddress=nil, tencentbackupaddress=nil, customeraddress=nil, directconnecttunnelname=nil, createdtime=nil, bandwidth=nil, netdetectid=nil, enablebgpcommunity=nil, nattype=nil, vpcregion=nil, bfdenable=nil, nqaenable=nil, accesspointtype=nil, directconnectgatewayname=nil, vpcname=nil, signlaw=nil, bfdinfo=nil, nqainfo=nil, bgpstatus=nil, ipv6enable=nil, tencentipv6address=nil, tencentbackupipv6address=nil, bgpipv6status=nil, customeripv6address=nil, jumboenable=nil)
@DirectConnectTunnelId = directconnecttunnelid
@DirectConnectId = directconnectid
@State = state
@DirectConnectOwnerAccount = directconnectowneraccount
@OwnerAccount = owneraccount
@NetworkType = networktype
@NetworkRegion = networkregion
@VpcId = vpcid
@DirectConnectGatewayId = directconnectgatewayid
@RouteType = routetype
@BgpPeer = bgppeer
@RouteFilterPrefixes = routefilterprefixes
@PublicAddresses = publicaddresses
@Vlan = vlan
@TencentAddress = tencentaddress
@TencentBackupAddress = tencentbackupaddress
@CustomerAddress = customeraddress
@DirectConnectTunnelName = directconnecttunnelname
@CreatedTime = createdtime
@Bandwidth = bandwidth
@NetDetectId = netdetectid
@EnableBGPCommunity = enablebgpcommunity
@NatType = nattype
@VpcRegion = vpcregion
@BfdEnable = bfdenable
@NqaEnable = nqaenable
@AccessPointType = accesspointtype
@DirectConnectGatewayName = directconnectgatewayname
@VpcName = vpcname
@SignLaw = signlaw
@BfdInfo = bfdinfo
@NqaInfo = nqainfo
@BgpStatus = bgpstatus
@IPv6Enable = ipv6enable
@TencentIPv6Address = tencentipv6address
@TencentBackupIPv6Address = tencentbackupipv6address
@BgpIPv6Status = bgpipv6status
@CustomerIPv6Address = customeripv6address
@JumboEnable = jumboenable
end
def deserialize(params)
@DirectConnectTunnelId = params['DirectConnectTunnelId']
@DirectConnectId = params['DirectConnectId']
@State = params['State']
@DirectConnectOwnerAccount = params['DirectConnectOwnerAccount']
@OwnerAccount = params['OwnerAccount']
@NetworkType = params['NetworkType']
@NetworkRegion = params['NetworkRegion']
@VpcId = params['VpcId']
@DirectConnectGatewayId = params['DirectConnectGatewayId']
@RouteType = params['RouteType']
unless params['BgpPeer'].nil?
@BgpPeer = BgpPeer.new
@BgpPeer.deserialize(params['BgpPeer'])
end
unless params['RouteFilterPrefixes'].nil?
@RouteFilterPrefixes = []
params['RouteFilterPrefixes'].each do |i|
routefilterprefix_tmp = RouteFilterPrefix.new
routefilterprefix_tmp.deserialize(i)
@RouteFilterPrefixes << routefilterprefix_tmp
end
end
unless params['PublicAddresses'].nil?
@PublicAddresses = []
params['PublicAddresses'].each do |i|
routefilterprefix_tmp = RouteFilterPrefix.new
routefilterprefix_tmp.deserialize(i)
@PublicAddresses << routefilterprefix_tmp
end
end
@Vlan = params['Vlan']
@TencentAddress = params['TencentAddress']
@TencentBackupAddress = params['TencentBackupAddress']
@CustomerAddress = params['CustomerAddress']
@DirectConnectTunnelName = params['DirectConnectTunnelName']
@CreatedTime = params['CreatedTime']
@Bandwidth = params['Bandwidth']
@NetDetectId = params['NetDetectId']
@EnableBGPCommunity = params['EnableBGPCommunity']
@NatType = params['NatType']
@VpcRegion = params['VpcRegion']
@BfdEnable = params['BfdEnable']
@NqaEnable = params['NqaEnable']
@AccessPointType = params['AccessPointType']
@DirectConnectGatewayName = params['DirectConnectGatewayName']
@VpcName = params['VpcName']
@SignLaw = params['SignLaw']
unless params['BfdInfo'].nil?
@BfdInfo = BFDInfo.new
@BfdInfo.deserialize(params['BfdInfo'])
end
unless params['NqaInfo'].nil?
@NqaInfo = NQAInfo.new
@NqaInfo.deserialize(params['NqaInfo'])
end
unless params['BgpStatus'].nil?
@BgpStatus = BGPStatus.new
@BgpStatus.deserialize(params['BgpStatus'])
end
@IPv6Enable = params['IPv6Enable']
@TencentIPv6Address = params['TencentIPv6Address']
@TencentBackupIPv6Address = params['TencentBackupIPv6Address']
unless params['BgpIPv6Status'].nil?
@BgpIPv6Status = BGPStatus.new
@BgpIPv6Status.deserialize(params['BgpIPv6Status'])
end
@CustomerIPv6Address = params['CustomerIPv6Address']
@JumboEnable = params['JumboEnable']
end
end
# 专用通道路由
class DirectConnectTunnelRoute < TencentCloud::Common::AbstractModel
# @param RouteId: 专用通道路由ID
# @type RouteId: String
# @param DestinationCidrBlock: 网段CIDR
# @type DestinationCidrBlock: String
# @param RouteType: 路由类型：BGP/STATIC路由
# @type RouteType: String
# @param Status: ENABLE：路由启用，DISABLE：路由禁用
# @type Status: String
# @param ASPath: ASPath信息
# @type ASPath: Array
# @param NextHop: 路由下一跳IP
# @type NextHop: String
attr_accessor :RouteId, :DestinationCidrBlock, :RouteType, :Status, :ASPath, :NextHop
def initialize(routeid=nil, destinationcidrblock=nil, routetype=nil, status=nil, aspath=nil, nexthop=nil)
@RouteId = routeid
@DestinationCidrBlock = destinationcidrblock
@RouteType = routetype
@Status = status
@ASPath = aspath
@NextHop = nexthop
end
def deserialize(params)
@RouteId = params['RouteId']
@DestinationCidrBlock = params['DestinationCidrBlock']
@RouteType = params['RouteType']
@Status = params['Status']
@ASPath = params['ASPath']
@NextHop = params['NextHop']
end
end
# DisableInternetAddress请求参数结构体
class DisableInternetAddressRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 公网互联网地址ID
# @type InstanceId: String
attr_accessor :InstanceId
def initialize(instanceid=nil)
@InstanceId = instanceid
end
def deserialize(params)
@InstanceId = params['InstanceId']
end
end
# DisableInternetAddress返回参数结构体
class DisableInternetAddressResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# EnableInternetAddress请求参数结构体
class EnableInternetAddressRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 互联网公网地址ID
# @type InstanceId: String
attr_accessor :InstanceId
def initialize(instanceid=nil)
@InstanceId = instanceid
end
def deserialize(params)
@InstanceId = params['InstanceId']
end
end
# EnableInternetAddress返回参数结构体
class EnableInternetAddressResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# 用于条件过滤查询
class Filter < TencentCloud::Common::AbstractModel
# @param Name: 需要过滤的字段。
# @type Name: String
# @param Values: 字段的过滤值。
# @type Values: Array
attr_accessor :Name, :Values
def initialize(name=nil, values=nil)
@Name = name
@Values = values
end
def deserialize(params)
@Name = params['Name']
@Values = params['Values']
end
end
# 互联网地址详细信息
class InternetAddressDetail < TencentCloud::Common::AbstractModel
# @param InstanceId: 互联网地址ID
# 注意：此字段可能返回 null，表示取不到有效值。
# @type InstanceId: String
# @param Subnet: 互联网网络地址
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Subnet: String
# @param MaskLen: 网络地址掩码长度
# 注意：此字段可能返回 null，表示取不到有效值。
# @type MaskLen: Integer
# @param AddrType: 0:BGP
# 1:电信
# 2:移动
# 3:联通
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AddrType: Integer
# @param Status: 0:使用中
# 1:已停用
# 2:已退还
# @type Status: Integer
# @param ApplyTime: 申请时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ApplyTime: String
# @param StopTime: 停用时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type StopTime: String
# @param ReleaseTime: 退还时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ReleaseTime: String
# @param Region: 地域信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Region: String
# @param AppId: 用户ID
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AppId: Integer
# @param AddrProto: 0:IPv4 1:IPv6
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AddrProto: Integer
# @param ReserveTime: 释放状态的IP地址保留的天数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ReserveTime: Integer
attr_accessor :InstanceId, :Subnet, :MaskLen, :AddrType, :Status, :ApplyTime, :StopTime, :ReleaseTime, :Region, :AppId, :AddrProto, :ReserveTime
def initialize(instanceid=nil, subnet=nil, masklen=nil, addrtype=nil, status=nil, applytime=nil, stoptime=nil, releasetime=nil, region=nil, appid=nil, addrproto=nil, reservetime=nil)
@InstanceId = instanceid
@Subnet = subnet
@MaskLen = masklen
@AddrType = addrtype
@Status = status
@ApplyTime = applytime
@StopTime = stoptime
@ReleaseTime = releasetime
@Region = region
@AppId = appid
@AddrProto = addrproto
@ReserveTime = reservetime
end
def deserialize(params)
@InstanceId = params['InstanceId']
@Subnet = params['Subnet']
@MaskLen = params['MaskLen']
@AddrType = params['AddrType']
@Status = params['Status']
@ApplyTime = params['ApplyTime']
@StopTime = params['StopTime']
@ReleaseTime = params['ReleaseTime']
@Region = params['Region']
@AppId = params['AppId']
@AddrProto = params['AddrProto']
@ReserveTime = params['ReserveTime']
end
end
# 互联网公网地址统计
class InternetAddressStatistics < TencentCloud::Common::AbstractModel
# @param Region: 地域
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Region: String
# @param SubnetNum: 互联网公网地址数量
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SubnetNum: Integer
attr_accessor :Region, :SubnetNum
def initialize(region=nil, subnetnum=nil)
@Region = region
@SubnetNum = subnetnum
end
def deserialize(params)
@Region = params['Region']
@SubnetNum = params['SubnetNum']
end
end
# ModifyDirectConnectAttribute请求参数结构体
class ModifyDirectConnectAttributeRequest < TencentCloud::Common::AbstractModel
# @param DirectConnectId: 物理专线的ID。
# @type DirectConnectId: String
# @param DirectConnectName: 物理专线名称。
# @type DirectConnectName: String
# @param CircuitCode: 运营商或者服务商为物理专线提供的电路编码。
# @type CircuitCode: String
# @param Vlan: 物理专线调试VLAN。
# @type Vlan: Integer
# @param TencentAddress: 物理专线调试腾讯侧互联 IP。
# @type TencentAddress: String
# @param CustomerAddress: 物理专线调试用户侧互联 IP。
# @type CustomerAddress: String
# @param CustomerName: 物理专线申请者姓名。默认从账户体系获取。
# @type CustomerName: String
# @param CustomerContactMail: 物理专线申请者联系邮箱。默认从账户体系获取。
# @type CustomerContactMail: String
# @param CustomerContactNumber: 物理专线申请者联系号码。默认从账户体系获取。
# @type CustomerContactNumber: String
# @param FaultReportContactPerson: 报障联系人。
# @type FaultReportContactPerson: String
# @param FaultReportContactNumber: 报障联系电话。
# @type FaultReportContactNumber: String
# @param SignLaw: 物理专线申请者补签用户使用协议
# @type SignLaw: Boolean
# @param Bandwidth: 物理专线带宽
# @type Bandwidth: Integer
attr_accessor :DirectConnectId, :DirectConnectName, :CircuitCode, :Vlan, :TencentAddress, :CustomerAddress, :CustomerName, :CustomerContactMail, :CustomerContactNumber, :FaultReportContactPerson, :FaultReportContactNumber, :SignLaw, :Bandwidth
def initialize(directconnectid=nil, directconnectname=nil, circuitcode=nil, vlan=nil, tencentaddress=nil, customeraddress=nil, customername=nil, customercontactmail=nil, customercontactnumber=nil, faultreportcontactperson=nil, faultreportcontactnumber=nil, signlaw=nil, bandwidth=nil)
@DirectConnectId = directconnectid
@DirectConnectName = directconnectname
@CircuitCode = circuitcode
@Vlan = vlan
@TencentAddress = tencentaddress
@CustomerAddress = customeraddress
@CustomerName = customername
@CustomerContactMail = customercontactmail
@CustomerContactNumber = customercontactnumber
@FaultReportContactPerson = faultreportcontactperson
@FaultReportContactNumber = faultreportcontactnumber
@SignLaw = signlaw
@Bandwidth = bandwidth
end
def deserialize(params)
@DirectConnectId = params['DirectConnectId']
@DirectConnectName = params['DirectConnectName']
@CircuitCode = params['CircuitCode']
@Vlan = params['Vlan']
@TencentAddress = params['TencentAddress']
@CustomerAddress = params['CustomerAddress']
@CustomerName = params['CustomerName']
@CustomerContactMail = params['CustomerContactMail']
@CustomerContactNumber = params['CustomerContactNumber']
@FaultReportContactPerson = params['FaultReportContactPerson']
@FaultReportContactNumber = params['FaultReportContactNumber']
@SignLaw = params['SignLaw']
@Bandwidth = params['Bandwidth']
end
end
# ModifyDirectConnectAttribute返回参数结构体
class ModifyDirectConnectAttributeResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyDirectConnectTunnelAttribute请求参数结构体
class ModifyDirectConnectTunnelAttributeRequest < TencentCloud::Common::AbstractModel
# @param DirectConnectTunnelId: 专用通道ID
# @type DirectConnectTunnelId: String
# @param DirectConnectTunnelName: 专用通道名称
# @type DirectConnectTunnelName: String
# @param BgpPeer: 用户侧BGP，包括Asn，AuthKey
# @type BgpPeer: :class:`Tencentcloud::Dc.v20180410.models.BgpPeer`
# @param RouteFilterPrefixes: 用户侧网段地址
# @type RouteFilterPrefixes: Array
# @param TencentAddress: 腾讯侧互联IP
# @type TencentAddress: String
# @param CustomerAddress: 用户侧互联IP
# @type CustomerAddress: String
# @param Bandwidth: 专用通道带宽值，单位为M。
# @type Bandwidth: Integer
# @param TencentBackupAddress: 腾讯侧备用互联IP
# @type TencentBackupAddress: String
attr_accessor :DirectConnectTunnelId, :DirectConnectTunnelName, :BgpPeer, :RouteFilterPrefixes, :TencentAddress, :CustomerAddress, :Bandwidth, :TencentBackupAddress
def initialize(directconnecttunnelid=nil, directconnecttunnelname=nil, bgppeer=nil, routefilterprefixes=nil, tencentaddress=nil, customeraddress=nil, bandwidth=nil, tencentbackupaddress=nil)
@DirectConnectTunnelId = directconnecttunnelid
@DirectConnectTunnelName = directconnecttunnelname
@BgpPeer = bgppeer
@RouteFilterPrefixes = routefilterprefixes
@TencentAddress = tencentaddress
@CustomerAddress = customeraddress
@Bandwidth = bandwidth
@TencentBackupAddress = tencentbackupaddress
end
def deserialize(params)
@DirectConnectTunnelId = params['DirectConnectTunnelId']
@DirectConnectTunnelName = params['DirectConnectTunnelName']
unless params['BgpPeer'].nil?
@BgpPeer = BgpPeer.new
@BgpPeer.deserialize(params['BgpPeer'])
end
unless params['RouteFilterPrefixes'].nil?
@RouteFilterPrefixes = []
params['RouteFilterPrefixes'].each do |i|
routefilterprefix_tmp = RouteFilterPrefix.new
routefilterprefix_tmp.deserialize(i)
@RouteFilterPrefixes << routefilterprefix_tmp
end
end
@TencentAddress = params['TencentAddress']
@CustomerAddress = params['CustomerAddress']
@Bandwidth = params['Bandwidth']
@TencentBackupAddress = params['TencentBackupAddress']
end
end
# ModifyDirectConnectTunnelAttribute返回参数结构体
class ModifyDirectConnectTunnelAttributeResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyDirectConnectTunnelExtra请求参数结构体
class ModifyDirectConnectTunnelExtraRequest < TencentCloud::Common::AbstractModel
# @param DirectConnectTunnelId: 专用通道ID
# @type DirectConnectTunnelId: String
# @param Vlan: 专用通道的Vlan
# @type Vlan: Integer
# @param BgpPeer: 用户侧BGP，Asn，AuthKey
# @type BgpPeer: :class:`Tencentcloud::Dc.v20180410.models.BgpPeer`
# @param RouteFilterPrefixes: 用户侧过滤网段地址
# @type RouteFilterPrefixes: :class:`Tencentcloud::Dc.v20180410.models.RouteFilterPrefix`
# @param TencentAddress: 腾讯侧互联IP
# @type TencentAddress: String
# @param TencentBackupAddress: 腾讯侧备用互联IP
# @type TencentBackupAddress: String
# @param CustomerAddress: 用户侧互联IP
# @type CustomerAddress: String
# @param Bandwidth: 专用通道带宽值
# @type Bandwidth: Integer
# @param EnableBGPCommunity: BGP community开关
# @type EnableBGPCommunity: Boolean
# @param BfdEnable: 是否开启BFD
# @type BfdEnable: Integer
# @param NqaEnable: 是否开启NQA
# @type NqaEnable: Integer
# @param BfdInfo: BFD配置信息
# @type BfdInfo: :class:`Tencentcloud::Dc.v20180410.models.BFDInfo`
# @param NqaInfo: NQA配置信息
# @type NqaInfo: :class:`Tencentcloud::Dc.v20180410.models.NQAInfo`
# @param IPv6Enable: 0：停用IPv6
# 1: 启用IPv6
# @type IPv6Enable: Integer
# @param CustomerIDCRoutes: 去往用户侧的路由信息
# @type CustomerIDCRoutes: Array
# @param JumboEnable: 是否开启巨帧
# 1：开启
# 0：不开启
# @type JumboEnable: Integer
attr_accessor :DirectConnectTunnelId, :Vlan, :BgpPeer, :RouteFilterPrefixes, :TencentAddress, :TencentBackupAddress, :CustomerAddress, :Bandwidth, :EnableBGPCommunity, :BfdEnable, :NqaEnable, :BfdInfo, :NqaInfo, :IPv6Enable, :CustomerIDCRoutes, :JumboEnable
def initialize(directconnecttunnelid=nil, vlan=nil, bgppeer=nil, routefilterprefixes=nil, tencentaddress=nil, tencentbackupaddress=nil, customeraddress=nil, bandwidth=nil, enablebgpcommunity=nil, bfdenable=nil, nqaenable=nil, bfdinfo=nil, nqainfo=nil, ipv6enable=nil, customeridcroutes=nil, jumboenable=nil)
@DirectConnectTunnelId = directconnecttunnelid
@Vlan = vlan
@BgpPeer = bgppeer
@RouteFilterPrefixes = routefilterprefixes
@TencentAddress = tencentaddress
@TencentBackupAddress = tencentbackupaddress
@CustomerAddress = customeraddress
@Bandwidth = bandwidth
@EnableBGPCommunity = enablebgpcommunity
@BfdEnable = bfdenable
@NqaEnable = nqaenable
@BfdInfo = bfdinfo
@NqaInfo = nqainfo
@IPv6Enable = ipv6enable
@CustomerIDCRoutes = customeridcroutes
@JumboEnable = jumboenable
end
def deserialize(params)
@DirectConnectTunnelId = params['DirectConnectTunnelId']
@Vlan = params['Vlan']
unless params['BgpPeer'].nil?
@BgpPeer = BgpPeer.new
@BgpPeer.deserialize(params['BgpPeer'])
end
unless params['RouteFilterPrefixes'].nil?
@RouteFilterPrefixes = RouteFilterPrefix.new
@RouteFilterPrefixes.deserialize(params['RouteFilterPrefixes'])
end
@TencentAddress = params['TencentAddress']
@TencentBackupAddress = params['TencentBackupAddress']
@CustomerAddress = params['CustomerAddress']
@Bandwidth = params['Bandwidth']
@EnableBGPCommunity = params['EnableBGPCommunity']
@BfdEnable = params['BfdEnable']
@NqaEnable = params['NqaEnable']
unless params['BfdInfo'].nil?
@BfdInfo = BFDInfo.new
@BfdInfo.deserialize(params['BfdInfo'])
end
unless params['NqaInfo'].nil?
@NqaInfo = NQAInfo.new
@NqaInfo.deserialize(params['NqaInfo'])
end
@IPv6Enable = params['IPv6Enable']
unless params['CustomerIDCRoutes'].nil?
@CustomerIDCRoutes = []
params['CustomerIDCRoutes'].each do |i|
routefilterprefix_tmp = RouteFilterPrefix.new
routefilterprefix_tmp.deserialize(i)
@CustomerIDCRoutes << routefilterprefix_tmp
end
end
@JumboEnable = params['JumboEnable']
end
end
# ModifyDirectConnectTunnelExtra返回参数结构体
class ModifyDirectConnectTunnelExtraResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# nqa配置信息
class NQAInfo < TencentCloud::Common::AbstractModel
# @param ProbeFailedTimes: 健康检查次数
# @type ProbeFailedTimes: Integer
# @param Interval: 健康检查间隔
# @type Interval: Integer
# @param DestinationIp: 健康检查地址
# @type DestinationIp: String
attr_accessor :ProbeFailedTimes, :Interval, :DestinationIp
def initialize(probefailedtimes=nil, interval=nil, destinationip=nil)
@ProbeFailedTimes = probefailedtimes
@Interval = interval
@DestinationIp = destinationip
end
def deserialize(params)
@ProbeFailedTimes = params['ProbeFailedTimes']
@Interval = params['Interval']
@DestinationIp = params['DestinationIp']
end
end
# RejectDirectConnectTunnel请求参数结构体
class RejectDirectConnectTunnelRequest < TencentCloud::Common::AbstractModel
# @param DirectConnectTunnelId: 无
# @type DirectConnectTunnelId: String
attr_accessor :DirectConnectTunnelId
def initialize(directconnecttunnelid=nil)
@DirectConnectTunnelId = directconnecttunnelid
end
def deserialize(params)
@DirectConnectTunnelId = params['DirectConnectTunnelId']
end
end
# RejectDirectConnectTunnel返回参数结构体
class RejectDirectConnectTunnelResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ReleaseInternetAddress请求参数结构体
class ReleaseInternetAddressRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 公网互联网地址ID
# @type InstanceId: String
attr_accessor :InstanceId
def initialize(instanceid=nil)
@InstanceId = instanceid
end
def deserialize(params)
@InstanceId = params['InstanceId']
end
end
# ReleaseInternetAddress返回参数结构体
class ReleaseInternetAddressResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# 用户侧网段地址
class RouteFilterPrefix < TencentCloud::Common::AbstractModel
# @param Cidr: 用户侧网段地址
# @type Cidr: String
attr_accessor :Cidr
def initialize(cidr=nil)
@Cidr = cidr
end
def deserialize(params)
@Cidr = params['Cidr']
end
end
# 标签键值对
class Tag < TencentCloud::Common::AbstractModel
# @param Key: 标签键
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Key: String
# @param Value: 标签值
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Value: String
attr_accessor :Key, :Value
def initialize(key=nil, value=nil)
@Key = key
@Value = value
end
def deserialize(params)
@Key = params['Key']
@Value = params['Value']
end
end
end
end
end