vmail

vmail is a Vim interface to Gmail. Here are some screenshots:

Why vmail? Because every minute you spend fumbling around in a web browser is a minute you're not experiencing the Zen of using a real text editor and staying close to the Unix command line.

Prerequisites

The current version of vmail assumes a Unix environment. I'll try to make later versions accommodate Windows.

Installation

gem install vmail

Configuration file

To run vmail, create a yaml file called .vmailrc and save it either in the current directory (the directory from which you launch vmail) or in your home directory.

The .vmailrc file should look something like this. Substitute your own values.

username: dhchoi@gmail.com
password: password
name: Daniel Choi
signature: |
  --
  Sent via vmail. http://danielchoi.com/software/vmail.html

This file should be formatted in YAML syntax.

You can omit the password key-value pair if you'd rather not have the password saved in the file. In that case, you'll prompted for the password each time you start vmail.

Contacts autocompletion

vmail uses vim autocompletion to help you auto-complete email addresses. To use this feature, generate a vmail-contacts.txt file in the current or home directory. This is a simple list of your email contacts. Invoking vmail with the -g option generates this file for you by collecting all the recipients and cc's from your last 500 sent emails. You can adjust this number by using -g with a number argument.

After vmail generates this file for you, you can edit it however and whenever you want, as long as there is one address per line.

Starting vmail

Once you've created the configuration file and (optionally) the contacts file, you can start vmail with

vmail

This opens the vmail/vim interface and shows you the last 100 messages in your Gmail inbox.

You can have vmail show messages from any other mailbox (a.k.a. label) on startup by passing in the mailbox name as an argument:

vmail starred

You can also pass in search parameters:

vmail important from barackobama@whitehouse.gov

On startup, vmail loads 100 messages by default. You can increase or decrease this number by passing in a number after the mailbox name:

vmail inbox 700 subject unix

Viewing messages

The first screen vmail shows you is a list of messages. You can view a message by moving the cursor line to it and pressing ENTER. This will split the screen and show the message content in the bottom pane.

To full-screen the message, press SPACE when the cursor is the message window. To go back to the split view, press ENTER.

You can full-screen the list window by pressing SPACE while the cursor is in it.

In the split view, you can jump between the two panes by just pressing ENTER from either window.

vmail loads a certain number messages at a time, starting with the most recent. If there are more messages that vmail hasn't loaded, you'll see a line at the top of the list that looks something like this:

> Load 100 more messages. 156 remaining.

Put the cursor on this line and press ENTER to load more of these messages.

Unread messages are marked with a [+] symbol.

To view the raw RFC822 version of a message, type ,R while viewing the message.

Starring, deleting, archiving, marking spam

To star a message, put the cursor on it and type ,* or alternatively s. Starring a message copies it to the starred mailbox. Starred messages are marked with a [*] symbol and color-highlighted.

To delete a message, put the cursor on it and type ,# or alternatively ,d. Deleting a message puts it in the trash mailbox. Deleting a message from the trash mailbox deletes it permanently.

To archive a message, put the cursor on it and type ,e. Archiving a message moves it to the all mailbox.

To mark a message spam, put the cursor on it and type ,!. This moves the message to to the spam mailbox.

You can use range selections in the message list when you star, delete, mark as spam, or archive. Use <C-v> to start marking a range of lines (the vertical position of the cursor doesn't matter). Then type any of the above commands to perform an action on all the messages you selected.

Switching mailboxes, moving messages, copying messages to another mailbox

To switch mailboxes, type ,m. You'll see an autocomplete window appear at the top. The standard vim autocomplete keystrokes apply:

Tip: start typing the first 1-3 characters of the mailbox name, then press C-u or C-p until you highlight the right match, and finally press ENTER to select.

To move a message to another mailbox, put the cursor on the message in the message list, and type ,b. You'll be prompted to select the target mailbox.

To copy a message to another mailbox, put the cursor on the message in the message list, and type ,B. You'll be prompted to select the target mailbox.

Composing messages

To start writing a new a email message, type ,c.

To reply to a message, type ,r.

To reply-all to a message, type ,a.

To forward a message, type ,f.

All these command open a message composition window. At the top, you will see mail headers like this:

from: Daniel Choi <dhchoi@gmail.com>
to:
subject:

The from: field will be pre-filled from your .vmailrc configuration. You're responsible for fill in the to: and the subject: fields. You can add a cc: and bcc: field if you want.

When you fill in the recipient addresses, you can use vim autocompletion if you generated a vmail-contacts.txt file. Start typing a name or email address, then press C-x C-u to invoke autocompletion.

Tip: Use C-y instead of ENTER to select a match. This will prevent you from creating a blank line in the middle of the email headers.

Make sure your email addresses are separated by commas and that they all ultimately appear on the same, unbroken line for each field. Vim will probably break long lines automatically as you type them, so for now (pending a future enhancement), you'll have to rejoin the lines if breaks get inserted.

After you fill in the headers, write your message. Make sure there is a blank line between the headers and the body of your message.

When you're done writing, send the message by typing ,vs in normal mode.

You can save the message as a draft in your draft mailbox by typing ,vd in normal mode.

At any point, you can quit the composition window by typing q in normal mode.

Attachments

The current version of vmail can handle attachments to a certain extent.

When you're viewing a message with attachments, you'll see something like this at the top of the message window:

INBOX 2113 4 kb
- image/png; name=canada.png
- image/gif; name=arrow_right.gif
---------------------------------------
from: Daniel Choi <dhchoi@gmail.com>
date: Sun, Dec 12 08:39 AM -05:00 2010
to: Daniel Choi <dhchoi@gmail.com>
subject: attachment test



see attached

To download these attachments to a local directory, type ,A. You'll be prompted for a directory path. Then vmail will save all the attachments in the message to this directory.

To send attachments, add something like this to your new message in the message composition window:

from: Daniel Choi <dhchoi@gmail.com>
to: barackobama@whitehouse.gov
subject: look at this!



attach:
- images/middle-east-map.png
- images/policypaper.pdf
- docs/



I think you'll find this stuff interesting.

The attach: block is a YAML list. The items are paths (either relative or absolute) to the files you want to attach to your message. Note that you can also specify a directory, in which case vmail attaches every file it finds in that directory.

One thing vmail doesn't do yet is let you forward a message with all its attachments intact. This feature will be implemented in the near future.

Printing messages to a file

,vp from the message list prints (appends) the text content of all the selected messages to a file.

Invoking your web browser

When you're reading a message, ,o opens the first hyperlink in the document on or after the cursor in your normal web browser.

When you're reading a message with an html mail part, ,h saves that part to a local file (vmail-htmlpart.html) and opens it in your normal web browser.

By default, the command vmail uses to open your web browser is open. In OS X, this opens URLs and HTML files in the default web browser. You can change the browser vmail invokes by setting the VMAIL_BROWSER environmental variable before you start vmail, e.g.:

export VMAIL_BROWSER='elinks'

Search queries

vmail can generate a message list by performing an IMAP search on the current mailbox. From the message list window, type ,s. This will prompt you for a search query. The search query is an optional number specifying the number of messages to return, followed by a valid IMAP search query.

Here are some example search queries.

# the default 
100 all  



# all messages from thematrix.com domain
from thematrix.com  



# all messages from this person
from barackobama@whitehouse.gov  



# subject field search; use double quotes to enclose multiple words
subject "unix philosophy"  



# example of date range and multiple conditions
before 30-Nov-2010 since 1-Nov-2010 from prx.org

Tip: When you're entering your search query, <C-u> clears the query line.

Power-Tip: <C-f> opens a mini-editor that contains the current query plus a history of previous vmail search queries. You can edit any line in this mini-editor and press ENTER to perform the query on that line.

Using vmail with MacVim

vmail uses standard Vim by default, but vmail also works with MacVim, but not perfectly. In particular, there seems to be a bug in MacVim that prevents vmail's status line activity messages from appearing properly. Nonetheless, most of vmail is functional in MacVim.

To use MacVim as your vmail Vim engine, export VMAIL_VIM=mvim before startin vmail.

Note that when vmail uses MacVim, the terminal window in which you invoke vmail will show vmail's logging output while MacVim is running. To quit vmail in MacVim mode, you will have to press CTRL-c in this window to stop the vmail process.

vmail file byproducts

vmail generates a few file byproducts when it is running. It generates a temporary vmailbuffer.txt file in the current directory to hold the message list. This should get deleted automatically when vmail quits.

vmail also creates a vmail-htmlpart.html file in the current directory if you open an HTML mail part from vmail.

Finally, vmail logs output to a vmail.log file which it creates in the current directory. You can tail this file in a separate terminal window to see what's going on behind the scenes as you use vmail.

Is my gmail password secure?

In short, yes. vmail uses TLS (Transport Layer Security) to perform IMAP and SMTP authentication. So vmail transmits your password securely over the network.

You can also be sure that the vmail code doesn't do anything nefarious with your Gmail password because vmail is open source. Anyone can inspect the source code of the copy fo vmail that runs on your computer and inspect the code at the github repository and at rubygems.org (where the vmail gem is downloaded from).

Bug reports, feature requests

Please file bug reports and features requests in the vmail github issue tracker.

How to contact the developer

My name is Daniel Choi. I am based in Cambridge, MA, and you can email me at dhchoi@gmail.com.

How to support the vmail project

If you find vmail very useful, feel free to drop me a note to say so. If you have a bug to report or a good feature to suggest, please file it on the issue tracker. Few things make this software developer happier than knowing that people find my software useful.

Please do not feel obligated to donate money simply because you use vmail. But if you want to donate some money to support the independent software developer behind vmail, use this PayPal button:

share this

links