[![Build Status](https://secure.travis-ci.org/jovelabs/cucumber-chef.png)](http://travis-ci.org/jovelabs/cucumber-chef) [![Dependency Status](https://gemnasium.com/jovelabs/cucumber-chef.png)](https://gemnasium.com/jovelabs/cucumber-chef) Cucumber-chef is a library of tools to enable the emerging discipline of infrastructure as code to practice test driven development. It provides a testing platform within which Cucumber tests can be run which provision virtual machines, configure them by applying the appropriate Chef roles to them, and then run acceptance and integration tests against the environment. ## Overview Cucumber-chef begins with a very simple premise. If we are framing our infrastructure as code - if we're writing cookbooks, recipes and other pieces of automation in a high level programming language, such as Ruby, then it makes sense to follow the current wisdom across the software development world to maximise the quality, maintainability and reusability of our code, providing maximum chance that we'll deliver value with it. One area which has been shown to have a very positive effect is the practive of 'test-driven' development. In this paradigm, the developer begins by writing a test that captures the intended behaviour of the code they are going to write. This test will start out by failing. The developer then writes code to make the test pass, and iterates thereafter. Cucumber-chef provides a framework to make it easier to do test-driven development for infrastructure. It does this by providing a test infrastructure, which we call the "test lab", within which a number of different scenarios can be set up, and against which Cucumber features can we run. From the outset, Cucumber-chef's design was to provide a fast, lightweight and cheap way to fire up virtual machines for testing. At present this is achieved using Linux Containers on Amazon EC2. Supporting alternative provisioning backends is planned, which will allow the user to opt to test using local machines, alternative cloud providers, and ultimatey alternative virtualization technologies. For node convergence, Cucumber-Chef uses the open-source Chef server. It can be configured to use Hosted Chef or Private Chef. Supoprt for Chef-solo will be included in a future relase. As you might have guessed from the name, we're going to write high level acceptance tests using Cucumber. Cucumber-Chef provides step definitions and helper methods to make it easy to provision and manage machines with Chef, and then build end-to-end tests. ## Getting Started *LISTEN UP* Here's the headline: With a /single command/ Cucumber-Chef will provision a machine, set up an open source Chef server, bootstrap it to support the creation of Linux containers, set up an environment from which to run tests, and automatically configure your system to use it. This means getting started with Cucumber-Chef is a simple, two step process. 1. Install Cucumber-Chef 2. Run `cucumber-chef init` to configure Cucumber-Chef. 3. Run `cucumber-chef setup` to build your test lab. ### Installing Cucumber-Chef Cucumber-Chef is distributed as a RubyGem. To install it you have two options - stable or development. #### Installing the stable version Simply install from RubyGems: $ gem install cucumber-chef Depending on your local setup (ie whether you're using RVM or rbenv, or distribution-provided Ruby), you may need to run this with superuser privileges. #### Installing the development version If you want to try a development version, simply clone this repo, and build the gem yourself: $ git clone git://github.com/Atalanta/cucumber-chef -b BRANCH $ cd cucumber-chef $ bundle $ rake build $ gem install pkg/cucumber-chef-VERSION.gem Again, depending on your local setup (ie whether you're using RVM or rbenv, or distribution-provided Ruby), you may need to run parts of this process with superuser privileges. ### Running `cucumber-chef init` Cucumber-Chef ships with an initialization task, which will interactively generate configuration file. This requires you to have, and know your Amazon Web Services credntials. On completion of the interactive configuration, it will provision a machine on EC2, and set up the entire infrastructure, using Chef. Cucumber-Chef doesn't demand where you keep your configuration file. By default, the config will be created in `~/.cucumber-chef`, but this can be overridden. Cucumber-Chef is clever enough to find your config, so it's all cool. The two obvious places to keep this config, are in the top level of your Chef repository, or in a dedicated Cucumber-Chef repository, but you're free to do whatever works for you. You can view and verify the current config at any time by running `cucumber-chef displayconfig`. If Cucumber-Chef thinks your config is incorrect, or incomplete, it'll tell you. ## Using Cucumber-Chef Once installed, you can run `cucumber-chef` on the command line to get an overview of the tasks it can carry out. $ cucumber-chef Tasks: cucumber-chef create # Create a project template for testing an infrastructure. cucumber-chef diagnose # Provide diagnostics from the chef-client on the specified container. cucumber-chef displayconfig # Display the current cucumber-chef config. cucumber-chef down # Shutdown the cucumber-chef test lab cucumber-chef help [TASK] # Describe available tasks or one specific task cucumber-chef info # Display information about the current test lab. cucumber-chef init # Initalize cucumber-chef configuration cucumber-chef ps [ps-options] # Snapshot of the current cucumber-chef test lab container processes. cucumber-chef setup # Setup cucumber-chef test lab in Amazon EC2 cucumber-chef ssh [container] # SSH to cucumber-chef test lab or [container] if specified. cucumber-chef teardown # Teardown cucumber-chef test lab in Amazon EC2 cucumber-chef up # Startup the cucumber-chef test lab Running just `cucumber` on the command line will run your tests. After running setup, which takes about 15 minutes, you'll have a fully funtioning platform available for you to use. Let's just quickly review what that means. You will have an EC2 machine, fully managed by Chef, and providing the following: * The ability to provision LXC containers * The ability to run tests against LXC containers * A dedicated environment for certain kinds of testing scenarios The next stage is to set up a project. A project is simply a directory structure for containing your cucumber features and steps, already set up with an appropriate environment to make use of the step definitions provided with Cucumber-Chef. Cucumber-chef provides a task which will create a the directory for you, and populate it with a README and an example feature and steps. These represent futher documentation, and provide a model and steps to get you up and running with your testing as quickly as possible. $ cd /path/to/chef-repo $ cucumber-chef create myproject This will create a directory, cucumber-chef, and a subdirectory, `myproject`. chef-repo/ ├── .chef ├── cookbooks ├── .cucumber-chef │ ├── aws │ │ └── checksums │ ├── checksums │ └── vagrant │ ├── artifacts │ └── checksums ├── data_bags ├── environments ├── features │ ├── support │ │ ├── cc-hooks.rb │ │ ├── env.rb │ │ ├── data_bags │ │ ├── environments │ │ ├── keys │ │ └── roles ├── roles └── site-cookbooks └── myproject ├── README └── features ├── myproject.feature ├── step_definitions │   └── myproject_steps.rb └── support └── env.rb ### General Tasks #### `up` If you are using an EBS volume, you can start and stop your test lab. This task will attempt to start your Cucumber-Chef test lab if it is currently stopped. #### `down` If you are using an EBS volume, you can start and stop your test lab. This task will attempt to stop your Cucumber-Chef test lab if it is currently running. ## Writing Tests Once you've got your test lab set up, and you've generated a project, it's time to crack on with writing a test. The basic idea is this: 1. An infrastructure requirement is established 2. Write a cucumber feature that expresses the required behaviour of the infrastructure requirement 3. Write steps that will build this infrastructure environment on the test lab, using the step definitions provided - these include the ability to create a container, apply roles to it, and destroy it again. 4. Write cookbooks and recipes and supporting code to make the test pass ### Container Details All containers operate off a bridged interface on the test-lab. All outbound, non-local traffic from the LXC containers are NAT'd through the test-lab and off to the outside world. This bridged interface on the test-lab is configured as follows: CIDR: 192.168.0.0/16 IP Address: 192.168.255.254 Netmask: 255.255.255.0 Broadcast: 192.168.255.255 You are free to use any IP in this /24, with the exception of the test-lab itself, which is at `192.168.255.254`. ### Built In Test Steps #### Provisioning We provide several built in steps to help you with provisioning. It is suggested you build a `Background` section for your features so these are not repeated with each scenario. This example `Background` section does the following: * Sets up a server called `devopserver`. * Makes the server persistant (it will remain up after the test finishes, which is the default behaviour). * Assigns what linux distro and release to use for the container. * Assigns it an IP address on the test lab network (this can be omitted for an auto-assigned IP). * Tells Cucumber-Chef to provision the server. * Adds the `chef-client::service` recipe in to the chef-client's run list. * Executes `chef-client` with the generated run list. * Starts an SSH session to the server so you can execute commands and test the output of those commands in the scenarios. Here is the `Background` section as you might write it in a feature: Background: * I have a server called "devopserver" * "devopserver" should be persistant * "devopserver" is running "ubuntu" "lucid" * "devopserver" has an IP address of "192.168.73.31" * "devopserver" has been provisioned * "devopserver" is in the "foobar" environment * the "chef-client::service" recipe has been added to the "devopserver" run list * the chef-client has been run on "devopserver" * I ssh to "devopserver" with the following credentials: | username | password | | root | root | To get a persistent server with an auto-assigned IP address using the generated and populated test lab SSH key pairs for SSH authentication you could write something like this. Remember the tests run on the test lab, so we can just back out a directory and reference our test lab SSH private key directly: Background: * I have a server called "devopserver" * "devopserver" is running "ubuntu" "lucid" * "devopserver" has been provisioned * "devopserver" is in the "foobar" environment * the "chef-client::service" recipe has been added to the "devopserver" run list * the chef-client has been run on "devopserver" * I ssh to "devopserver" with the following credentials: | username | keyfile | | root | ../.ssh/id_rsa | You can add roles to the run list by writing: * the "chef-client" role has been added to the "devopserver" run list Here's an example `Scenario` section you might have to test if the chef-client is actually running as a daemon: Scenario: Chef-Client is running as a daemon When I run "ps aux | grep [c]hef-client" Then I should see "chef-client" in the output And I should see "-d" in the output And I should see "-i 1800" in the output And I should see "-s 20" in the output See the section below label *Example Test Run* for more examples. ##### List of Provisioning Steps Create a server profile: I have a server called "(server)" Set a (server) to persist or not: "(server)" should( not) be persistant Set (server) to run linux of type (distro), using (release). "(server)" is running "(distro)" "(release)" Supported (distro -> releases): ubuntu -> lucid, maverick, natty, oneiric, precise fedora -> (release number) Fedora releases 12, 13, 14 tested OK. Assign (server) a specific IP address (must be on the test lab network segment): "(server)" has an IP address of "(ip)" Assign (server) a specific MAC address: "(server)" has a MAC address of "(mac)" Initiate the provision of a (server). All attributes of the server need to be set before this: "(server)" has been provisioned #### Chef Steps To prep a server with a role and data bag: * the following roles have been updated: | role | role_path | | users | ./features/support/roles/ | * the "users" role has been added to the "users" run list * the following databags have been updated: | databag | databag_path | | users | ./features/support/data_bags/users | ##### List of Chef Steps Update/push cookbooks to the chef-server: * the following cookbooks have been uploaded: | cookbook | cookbook_path | | users | ./cookbooks/ | Update/push roles to the chef-server: * the following roles have been updated: | role | role_path | | users | ./features/support/roles/ | or * the following roles have been updated: | role | role_path | | users | ./roles/ | Update/push data bags to the chef-server: * the following databags have been updated: | databag | databag_path | | users | ./features/support/data_bags/users | or * the following databags have been updated: | databag | databag_path | | users | ./data_bags/users | Add a role to the chef-client run list: the "(role)" role has been added to the "(server)" run list Add a recipe to the chef-client run list: the "(recipe)" recipe has been added to the "(server)" run list Place the node in a specific chef environment: "(server)" is in the "(environment)" environment Run the chef-client: the chef-client has been run on "(server)" In order to push data bags/roles/cookbooks to the chef-server using one of the above steps, you will have to create a `cucumber.yml` file in the root of your `chef-repo` with the following contents (see [issue 88](https://github.com/Atalanta/cucumber-chef/issues/88)): --- default: -c -v --exclude support/data_bags --exclude support/roles --exclude support/cookbooks Alternatively, you can simply reference the normal data bags/roles/cookbooks directory like so: * the following roles have been updated: | role | role_path | | users | ./roles/ | #### SSH Steps Here is how you might setup and initate an SSH session using password authentication to a server named `devopserver`: * I have no public keys set * I ssh to "devopserver" with the following credentials: | username | password | | root | root | Here is how you might setup and initate an SSH session using public key authentication to a server named `users`: * I ssh to "users" with the following credentials: | username | keyfile | | root | ../.ssh/id_rsa | Since the cukes run on the test lab, we can directly reference the public key pairs already there and populated for us. Suppose we have a cookbook that creates new users. After it runs we should be able to SSH in with our public keys. Let's test this. First we'll do our setup in the `Background`: Background: * I have a server called "users" * "users" is running "ubuntu" "lucid" * "users" has been provisioned * the following roles have been updated: | role | role_path | | users | ./features/support/roles/ | * the "users" role has been added to the "users" run list * the following databags have been updated: | databag | databag_path | | users | ./features/support/data_bags/users | * the chef-client has been run on "users" And now for the `Scenario`: Scenario: The user can ssh in to the system with their key pair * I ssh to "users" with the following credentials: | username | keyfile | | bdobbs | ./features/support/keys/bdobbs | When I run "hostname" Then I should see "users" in the output ##### List of SSH Steps Sets the authentication method to password: I have no public keys set Start an SSH session to the server (server) using password authentication: I ssh to "(server)" with the following credentials: | username | password | | root | root | Start an SSH session to the server (server) using public key authentication: I ssh to "(server)" with the following credentials: | username | keyfile | | root | id_rsa | Executes (command) over the previously established SSH session on the server (server): I run "(command)" Check (command) output for an (expected) or (not-expected) string: I should( not) see "(expected)" in the output Check (command) output for existance of or lack of (server) settings: I should( not) see the "(ip|mac)" of "(server)" in the output Check for a (running) or (not-running) (process) service "(nginx)" should( not) be running #### Minitest ##### List of Minitest Steps I enable the running of MiniTest suites for "(server)" the tests should run and pass on "(server)" #### Cucumber Before Hook Centric Helpers * `chef_set_client_config(config={})` This method configures the chef-client's `client.rb` file. Currently you can specify `:orgname`, `:log_level`, `:log_location`, `:chef_server_url` and `:validation_client_name`. See your `env.rb` file if you need to change this to point it at a Hosted Chef Server or need to modify any of these values. ##### Examples # for Opscode Hosted chef-server use this: #chef_set_client_config(:orgname => "cucumber-chef") # for Opscode OS chef-server on the Cucumber-Chef test lab use this: chef_set_client_config(:chef_server_url => "http://192.168.255.254:4000", :validation_client_name => "chef-validator") ## Running Tests You can write the tests and Chef code wherever you like. We're assuming you prefer working on your local machine, and checking into version control. But we don't really care. When it's time to run tests, Cucumber provides a task which handles this: $ cucumber Containers are now persisted by default. This means faster run times on average but if things get screwy, or you want to test from a clean slate, you can easily reset your containers. $ cucumber-chef help teardown Usage: cucumber-chef teardown [container] Teardown the cucumber-chef test lab in Amazon EC2 or a test lab [container] if specified. Since to run a test you simply run cucumber, you can now pass in options for cucumber or even setup profiles via `cucumber.yml`. For example: $ cucumber --tags @wip -c -v -b To take advantage of cucumber profiles, create a `cucumber.yml` configuration file in the root of your chef-repo; just as you would with any other project using cucumber. In this file you can take full advantage of the Cucumber profiles as definied on their wiki, https://github.com/cucumber/cucumber/wiki/cucumber.yml. Here is an example default project for `cucumber.yml` which turns on colored output, verbosity and full backtraces for all test runs: --- default: -c -v -b Running the test task will upload your current project to the test lab, and run the tests, reporting the results back to the screen. Cucumber-chef also provides an upload task, so you can push the current project to the test lab, and then connect to test lab yourself to run tests in a more granular way. To do this, you need to know the IP of the test lab. You can find this out by running: $ cucumber-chef info At present, Cucumber-Chef only allows one test lab per AWS account. In practice, this has not been a constraint. LXC is incredibly lightweight, and a large number of containers can be provisioned on even a small EC2 instance. ### When Things Go Oh So Wrong We have put in a few tasks to help you diagnose any issues you may come across with the test lab, containers or your cookbooks and recipes. There are two main tasks available to help you with this: `ssh` and `diagnose`. #### `ssh` $ cucumber-chef help ssh Usage: cucumber-chef ssh [container] Options: [--test] # INTERNAL USE ONLY SSH to cucumber-chef test lab or [container] if specified. This command provides you with a rapid way to connect to either your test lab or containers. Think `vagrant ssh`; we took a queue from their wonderful gem and realized we want our gem to provide the same sort of functionality. The main difference between our `ssh` task and the way Vagrant's task works is that we generate a fresh ssh key pair whenever a test lab is setup; so you can rest assured no one else has a copy of the credientials. You also do not have to worry about generating or specifying your own key pair to override a default key pair as is the case with Vagrant if you do not want to use the one shipped with Vagrant. $ cucumber-chef ssh Attempting SSH connection to cucumber-chef 'test lab'... _____ _ _____ _ __ / ____| | | / ____| | / _| | | _ _ ___ _ _ _ __ ___ | |__ ___ _ __| | | |__ ___| |_ | | | | | |/ __| | | | '_ ` _ \| '_ \ / _ \ '__| | | '_ \ / _ \ _| | |___| |_| | (__| |_| | | | | | | |_) | __/ | | |____| | | | __/ | \_____\__,_|\___|\__,_|_| |_| |_|_.__/ \___|_| \_____|_| |_|\___|_| Welcome to the Cucumber Chef Test Lab v2.0.0.rc1 Last login: Mon Jun 4 07:56:40 2012 from [REDACTED] ubuntu@cucumber-chef:~$ Keep in mind with Amazon's EC2 the base `ubuntu` user is already in the sudoers file; so you can `sudo su -` without needing the password. ubuntu@cucumber-chef:~$ sudo su - root@cucumber-chef:~# You can also specify a container name to SSH directly into that container. For now you are always logged in as `root` when you SSH to a container. $ cucumber-chef ssh devopserver Attempting SSH connection to cucumber-chef container 'devopserver'... _____ _ _____ _ __ / ____| | | / ____| | / _| | | _ _ ___ _ _ _ __ ___ | |__ ___ _ __| | | |__ ___| |_ | | | | | |/ __| | | | '_ ` _ \| '_ \ / _ \ '__| | | '_ \ / _ \ _| | |___| |_| | (__| |_| | | | | | | |_) | __/ | | |____| | | | __/ | \_____\__,_|\___|\__,_|_| |_| |_|_.__/ \___|_| \_____|_| |_|\___|_| Welcome to the Cucumber Chef Test Lab v2.0.0.rc1 You are now logged in to the LXC 'devopserver' root@devopserver:~# #### `diagnose` This command provides you with a rapid way to get to the chef-client logs without needing to SSH into a container. There are a few basic options with this task, let's take a look at them. $ cucumber-chef help diagnose Usage: cucumber-chef diagnose Options: -n, [--lines=N] # output the last N lines of the chef-client 'chef.log' # Default: 1 -s, [--strace] # output the chef-client 'chef-stacktrace.out' # Default: true -l, [--log] # output the chef-client 'chef.log' # Default: true Provide diagnostics from the chef-client on the specified container. With the default options in effect, this task will output the `chef-stacktrace.out` file along with the last line of the `chef.log` file. You can of course request as many lines as you desire from the `chef.log` file. For example to look at the last 1000 lines of only the `chef.log` file you would likely run the task as follows. $ cucumber-chef diagnose devopserver --no-strace -n 1000 Maybe you only want to view the `chef-stacktrace.out` file? $ cucumber-chef diagnose devopserver --no-log Maybe you want to run it with the default options in play; you would likely get some output as follows. $ cucumber-chef diagnose devopserver Attempting to collect diagnostic information on cucumber-chef container 'sysopserver'... ---------------------------------------------------------------------------- chef-stacktrace.out: ---------------------------------------------------------------------------- Generated at 2012-06-04 08:30:20 +0000 Net::HTTPServerException: 412 "Precondition Failed" /opt/opscode/embedded/lib/ruby/1.9.1/net/http.rb:2303:in `error!' /opt/opscode/embedded/lib/ruby/gems/1.9.1/gems/chef-0.10.10/lib/chef/rest.rb:264:in `block in api_request' /opt/opscode/embedded/lib/ruby/gems/1.9.1/gems/chef-0.10.10/lib/chef/rest.rb:328:in `retriable_rest_request' /opt/opscode/embedded/lib/ruby/gems/1.9.1/gems/chef-0.10.10/lib/chef/rest.rb:240:in `api_request' /opt/opscode/embedded/lib/ruby/gems/1.9.1/gems/chef-0.10.10/lib/chef/rest.rb:139:in `post_rest' /opt/opscode/embedded/lib/ruby/gems/1.9.1/gems/chef-0.10.10/lib/chef/client.rb:313:in `sync_cookbooks' /opt/opscode/embedded/lib/ruby/gems/1.9.1/gems/chef-0.10.10/lib/chef/client.rb:194:in `setup_run_context' /opt/opscode/embedded/lib/ruby/gems/1.9.1/gems/chef-0.10.10/lib/chef/client.rb:162:in `run' /opt/opscode/embedded/lib/ruby/gems/1.9.1/gems/chef-0.10.10/lib/chef/application/client.rb:254:in `block in run_application' /opt/opscode/embedded/lib/ruby/gems/1.9.1/gems/chef-0.10.10/lib/chef/application/client.rb:241:in `loop' /opt/opscode/embedded/lib/ruby/gems/1.9.1/gems/chef-0.10.10/lib/chef/application/client.rb:241:in `run_application' /opt/opscode/embedded/lib/ruby/gems/1.9.1/gems/chef-0.10.10/lib/chef/application.rb:70:in `run' /opt/opscode/embedded/lib/ruby/gems/1.9.1/gems/chef-0.10.10/bin/chef-client:26:in `' /usr/bin/chef-client:19:in `load' /usr/bin/chef-client:19:in `
' ---------------------------------------------------------------------------- chef.log: ---------------------------------------------------------------------------- [Mon, 04 Jun 2012 08:30:20 +0000] FATAL: Net::HTTPServerException: 412 "Precondition Failed" #### `ps` This command provides you with a snapshot of all the container processes running on the Cucumber-Chef test lab. You can pass in `ps` command line options to customize the output as you desire. $ cucumber-chef help ps Usage: cucumber-chef ps [ps-options] Snapshot of the current cucumber-chef test lab container processes. Standard usage using `aux` options: $ cucumber-chef ps aux cucumber-chef v2.0.0.rc1 Getting container processes from cucumber-chef test lab... ============================================================================ CONTAINER USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND sudo root 375 0.0 0.0 2368 608 ? S Jun21 0:00 upstart-udev-bridge --daemon sudo syslog 384 0.0 0.0 27296 1264 ? Sl Jun21 0:00 rsyslogd -c4 sudo root 396 0.0 0.0 2236 388 ? S`) and `@wip`. Be sure to pass that to the test runner so Cucumber knows to only run tests tagged with that, unless you want to test all your features. $ cucumber --tags @devopserver Using features directory: /home/couldbeyou/chef-repo/features Cucumber-Chef Test Runner Initalized! Cleaning up any previous test runs...done. Uploading files required for this test run...done. Executing Cucumber-Chef Test Runner Using the default profile... Code: * ./support/env.rb * ./devopserver/step_definitions/devopserver_steps.rb * ./sample/step_definitions/sample_steps.rb Features: * ./devopserver/devopserver.feature Parsing feature files took 0m0.076s @devopserver @wip Feature: Perform test driven infrastructure with Cucumber-Chef In order to learn how to develop test driven infrastructure As an infrastructure developer I want to better understand how to use Cucumber-Chef Background: # ./devopserver/devopserver.feature:7 * all servers are being destroyed * I have a server called "devopserver" # cucumber-chef-2.0.0.rc1/lib/cucumber/chef/steps/provision_steps.rb:1 * "devopserver" is running "ubuntu" "lucid" # cucumber-chef-2.0.0.rc1/lib/cucumber/chef/steps/provision_steps.rb:5 * devopserver is being provisioned * "devopserver" has been provisioned # cucumber-chef-2.0.0.rc1/lib/cucumber/chef/steps/provision_steps.rb:25 * the "chef-client::service" recipe has been added to the "devopserver" run list # cucumber-chef-2.0.0.rc1/lib/cucumber/chef/steps/provision_steps.rb:33 * the chef-client has been run on "devopserver" # cucumber-chef-2.0.0.rc1/lib/cucumber/chef/steps/provision_steps.rb:37 * I ssh to "devopserver" with the following credentials: # cucumber-chef-2.0.0.rc1/lib/cucumber/chef/steps/ssh_steps.rb:57 | username | keyfile | | root | ../.ssh/id_rsa | Scenario: Can connect to the provisioned server via SSH password authentication # ./devopserver/devopserver.feature:17 And I run "hostname" # cucumber-chef-2.0.0.rc1/lib/cucumber/chef/steps/ssh_steps.rb:77 Then I should see "devopserver" in the output # cucumber-chef-2.0.0.rc1/lib/cucumber/chef/steps/ssh_steps.rb:81 Scenario: Default root shell is bash # ./devopserver/devopserver.feature:21 And I run "echo $SHELL" # cucumber-chef-2.0.0.rc1/lib/cucumber/chef/steps/ssh_steps.rb:77 Then I should see "bash" in the output # cucumber-chef-2.0.0.rc1/lib/cucumber/chef/steps/ssh_steps.rb:81 Scenario: Default gateway and resolver are using Cucumber-Chef Test Lab # ./devopserver/devopserver.feature:25 And I run "route -n | grep 'UG'" # cucumber-chef-2.0.0.rc1/lib/cucumber/chef/steps/ssh_steps.rb:77 Then I should see "192.168.255.254" in the output # cucumber-chef-2.0.0.rc1/lib/cucumber/chef/steps/ssh_steps.rb:81 And I run "cat /etc/resolv.conf" # cucumber-chef-2.0.0.rc1/lib/cucumber/chef/steps/ssh_steps.rb:77 Then I should see "192.168.255.254" in the output # cucumber-chef-2.0.0.rc1/lib/cucumber/chef/steps/ssh_steps.rb:81 And I should see "8.8.8.8" in the output # cucumber-chef-2.0.0.rc1/lib/cucumber/chef/steps/ssh_steps.rb:81 And I should see "8.8.4.4" in the output # cucumber-chef-2.0.0.rc1/lib/cucumber/chef/steps/ssh_steps.rb:81 Scenario: Primary interface is configured with my IP address and MAC address # ./devopserver/devopserver.feature:33 And I run "ifconfig eth0" # cucumber-chef-2.0.0.rc1/lib/cucumber/chef/steps/ssh_steps.rb:77 Then I should see the "IP" of "devopserver" in the output # cucumber-chef-2.0.0.rc1/lib/cucumber/chef/steps/ssh_steps.rb:90 And I should see the "MAC" of "devopserver" in the output # cucumber-chef-2.0.0.rc1/lib/cucumber/chef/steps/ssh_steps.rb:90 Scenario: Local interface is not configured with my IP address or MAC address # ./devopserver/devopserver.feature:38 And I run "ifconfig lo" # cucumber-chef-2.0.0.rc1/lib/cucumber/chef/steps/ssh_steps.rb:77 Then I should see "127.0.0.1" in the output # cucumber-chef-2.0.0.rc1/lib/cucumber/chef/steps/ssh_steps.rb:81 And I should not see the "IP" of "devopserver" in the output # cucumber-chef-2.0.0.rc1/lib/cucumber/chef/steps/ssh_steps.rb:90 And I should not see the "MAC" of "devopserver" in the output # cucumber-chef-2.0.0.rc1/lib/cucumber/chef/steps/ssh_steps.rb:90 Scenario: Chef-Client is running as a daemon # ./devopserver/devopserver.feature:44 When I run "ps aux | grep [c]hef-client" # cucumber-chef-2.0.0.rc1/lib/cucumber/chef/steps/ssh_steps.rb:77 Then I should see "chef-client" in the output # cucumber-chef-2.0.0.rc1/lib/cucumber/chef/steps/ssh_steps.rb:81 And I should see "-d" in the output # cucumber-chef-2.0.0.rc1/lib/cucumber/chef/steps/ssh_steps.rb:81 And I should see "-i 1800" in the output # cucumber-chef-2.0.0.rc1/lib/cucumber/chef/steps/ssh_steps.rb:81 And I should see "-s 20" in the output # cucumber-chef-2.0.0.rc1/lib/cucumber/chef/steps/ssh_steps.rb:81 6 scenarios (6 passed) 58 steps (58 passed) 2m45.515s If all goes well you should see output similar to what's above! Enjoy and have fun! # RESOURCES Source: * https://github.com/Atalanta/cucumber-chef Issues: * https://github.com/Atalanta/cucumber-chef/issues Wiki: * https://github.com/Atalanta/cucumber-chef/wiki Chat: * #cucumber-chef on irc.freenode.net # LICENSE Cucumber-Chef - A test driven infrastructure system * Author: Stephen Nelson-Smith * Author: Zachary Patten * Copyright: Copyright (c) 2011-2012 Atalanta Systems Ltd * License: Apache License, Version 2.0 Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.