# frozen_string_literal: true
module YARD
  # This class maintains all system-wide configuration for YARD and handles
  # the loading of plugins. To access options call {options}, and to load
  # a plugin use {load_plugin}. All other public methods are used by YARD
  # during load time.
  #
  # == User Configuration Files
  #
  # Persistent user configuration files can be stored in the file
  # +~/.yard/config+, which is read when YARD first loads. The file should
  # be formatted as YAML, and should contain a map of keys and values.
  #
  # Although you can specify any key-value mapping in the configuration file,
  # YARD defines special keys specified in {DEFAULT_CONFIG_OPTIONS}.
  #
  # An example of a configuration file is listed below:
  #
  #     !!!yaml
  #     load_plugins: true # Auto-load plugins when YARD starts
  #     ignored_plugins:
  #       - yard-broken
  #       - broken2 # yard- prefix not necessary
  #     autoload_plugins:
  #       - yard-rspec
  #
  # == Automatic Loading of Plugins
  #
  # YARD 0.6.2 will no longer automatically load all plugins by default. This
  # option can be reset by setting 'load_plugins' to true in the configuration
  # file. In addition, you can specify a set of specific plugins to load on
  # load through the 'autoload_plugins' list setting. This setting is
  # independent of the 'load_plugins' value and will always be processed.
  #
  # == Ignored Plugins File
  #
  # YARD 0.5 and below used a +~/.yard/ignored_plugins+ file to specify
  # plugins to be ignored at load time. Ignored plugins in 0.6.2 and above
  # should now be specified in the main configuration file, though YARD
  # will support the +ignored_plugins+ file until 0.7.x.
  #
  # == Safe Mode
  #
  # YARD supports running in safe-mode. By doing this, it will avoid executing
  # any user code such as require files or queries. Plugins will still be
  # loaded with safe mode on, because plugins are properly namespaced with
  # a 'yard-' prefix, must be installed as a gem, and therefore cannot be
  # touched by the user. To specify safe mode, use the +safe_mode+ key.
  #
  # == Plugin Specific Configuration
  #
  # Additional settings can be defined within the configuration file
  # specifically to provide configuration for a plugin. A plugin that utilizes
  # the YARD configuration is strongly encouraged to utilize namespacing of
  # their configuration content.
  #
  #     !!!yaml
  #     load_plugins: true # Auto-load plugins when YARD starts
  #     ignored_plugins:
  #       - yard-broken
  #       - broken2 # yard- prefix not necessary
  #     autoload_plugins:
  #       - yard-rspec
  #     # Plugin Specific Configuration
  #     yard-sample-plugin:
  #       show-results-inline: true
  #
  # As the configuration is available system wide, it can be
  # accessed within the plugin code.
  #
  #
  #     if YARD::Config.options['yard-sample-plugin'] and
  #       YARD::Config.options['yard-sample-plugin']['show-results-inline']
  #       # ... perform the action that places the results inline ...
  #     else
  #       # ... do the default behavior of not showing the results inline ...
  #     end
  #
  # When accessing the configuration, be aware that this file is user managed
  # so configuration keys and values may not be present. Make no assumptions and
  # instead ensure that you check for the existence of keys before proceeding to
  # retrieve values.
  #
  # @since 0.6.2
  # @see options
  class Config
    class << self
      # The system-wide configuration options for YARD
      # @return [SymbolHash] a map a key-value pair settings.
      # @see DEFAULT_CONFIG_OPTIONS
      attr_accessor :options
    end

    # The location where YARD stores user-specific settings
    CONFIG_DIR = File.expand_path('~/.yard')

    # The main configuration YAML file.
    CONFIG_FILE = File.join(CONFIG_DIR, 'config')

    # File listing all ignored plugins
    # @deprecated Set `ignored_plugins` in the {CONFIG_FILE} instead.
    IGNORED_PLUGINS = File.join(CONFIG_DIR, 'ignored_plugins')

    # Default configuration options
    DEFAULT_CONFIG_OPTIONS = {
      :load_plugins => false,   # Whether to load plugins automatically with YARD
      :ignored_plugins => [],   # A list of ignored plugins by name
      :autoload_plugins => [],  # A list of plugins to be automatically loaded
      :safe_mode => false       # Does not execute or eval any user-level code
    }

    # The prefix used for YARD plugins. Name your gem with this prefix
    # to allow it to be used as a plugin.
    YARD_PLUGIN_PREFIX = /^yard[-_]/

    # Loads settings from {CONFIG_FILE}. This method is called by YARD at
    # load time and should not be called by the user.
    # @return [void]
    def self.load
      self.options = SymbolHash.new(false)
      options.update(DEFAULT_CONFIG_OPTIONS)
      options.update(read_config_file)
      load_commandline_safemode
      add_ignored_plugins_file
      translate_plugin_names
      load_plugins
    rescue => e
      log.error "Invalid configuration file, using default options."
      log.backtrace(e)
      options.update(DEFAULT_CONFIG_OPTIONS)
    end

    # Saves settings to {CONFIG_FILE}.
    # @return [void]
    def self.save
      require 'yaml'
      Dir.mkdir(CONFIG_DIR) unless File.directory?(CONFIG_DIR)
      File.open(CONFIG_FILE, 'w') {|f| f.write(YAML.dump(options)) }
    end

    # Loads gems that match the name 'yard-*' (recommended) or 'yard_*' except
    # those listed in +~/.yard/ignored_plugins+. This is called immediately
    # after YARD is loaded to allow plugin support.
    #
    # @return [Boolean] true if all plugins loaded successfully, false otherwise.
    def self.load_plugins
      load_gem_plugins &&
        load_autoload_plugins &&
        load_commandline_plugins ? true : false
    end

    # Loads an individual plugin by name. It is not necessary to include the
    # +yard-+ plugin prefix here.
    #
    # @param [String] name the name of the plugin (with or without +yard-+ prefix)
    # @return [Boolean] whether the plugin was successfully loaded
    def self.load_plugin(name)
      name = translate_plugin_name(name)
      return false if options[:ignored_plugins].include?(name)
      return false if name =~ /^yard-doc-/
      log.debug "Loading plugin '#{name}'..."
      require name
      true
    rescue LoadError => e
      load_plugin_failed(name, e)
    end

    # Load gem plugins if :load_plugins is true
    def self.load_gem_plugins
      return true unless options[:load_plugins]
      require 'rubygems'
      result = true
      YARD::GemIndex.each do |gem|
        begin
          next true unless gem.name =~ YARD_PLUGIN_PREFIX
          load_plugin(gem.name)
        rescue Gem::LoadError => e
          tmp = load_plugin_failed(gem.name, e)
          result = tmp unless tmp
        end
      end
      result
    rescue LoadError
      log.debug "RubyGems is not present, skipping plugin loading"
      false
    end

    # Load plugins set in :autoload_plugins
    def self.load_autoload_plugins
      options[:autoload_plugins].each {|name| load_plugin(name) }
    end

    # Load plugins from {arguments}
    def self.load_commandline_plugins
      with_yardopts do
        arguments.each_with_index do |arg, i|
          next unless arg == '--plugin'
          load_plugin(arguments[i + 1])
        end
      end
    end

    # Check for command-line safe_mode switch in {arguments}
    def self.load_commandline_safemode
      with_yardopts do
        arguments.each_with_index do |arg, _i|
          options[:safe_mode] = true if arg == '--safe'
        end
      end
    end

    # Print a warning if the plugin failed to load
    # @return [false]
    def self.load_plugin_failed(name, exception)
      log.error "Error loading plugin '#{name}'"
      log.backtrace(exception) if $DEBUG
      false
    end

    # Legacy support for {IGNORED_PLUGINS}
    def self.add_ignored_plugins_file
      if File.file?(IGNORED_PLUGINS)
        options[:ignored_plugins] += File.read(IGNORED_PLUGINS).split(/\s+/)
      end
    end

    # Translates plugin names to add yard- prefix.
    def self.translate_plugin_names
      options[:ignored_plugins].map! {|name| translate_plugin_name(name) }
      options[:autoload_plugins].map! {|name| translate_plugin_name(name) }
    end

    # Loads the YAML configuration file into memory
    # @return [Hash] the contents of the YAML file from disk
    # @see CONFIG_FILE
    def self.read_config_file
      if File.file?(CONFIG_FILE)
        require 'yaml'
        YAML.load_file(CONFIG_FILE)
      else
        {}
      end
    end

    # Sanitizes and normalizes a plugin name to include the 'yard-' prefix.
    # @param [String] name the plugin name
    # @return [String] the sanitized and normalized plugin name.
    def self.translate_plugin_name(name)
      name = name.delete('/') # Security sanitization
      name = "yard-" + name unless name =~ YARD_PLUGIN_PREFIX
      name
    end

    # Temporarily loads .yardopts file into @yardopts
    def self.with_yardopts
      yfile = CLI::Yardoc::DEFAULT_YARDOPTS_FILE
      @yardopts = File.file?(yfile) ? File.read_binary(yfile).shell_split : []
      result = yield
      @yardopts = nil
      result
    end

    # @return [Array<String>] arguments from commandline and yardopts file
    def self.arguments
      ARGV + @yardopts
    end
  end

  Config.options = Config::DEFAULT_CONFIG_OPTIONS
end