# PulpFileClient::RepositoriesFileVersionsApi All URIs are relative to *https://pulp* Method | HTTP request | Description ------------- | ------------- | ------------- [**delete**](RepositoriesFileVersionsApi.md#delete) | **DELETE** {file_file_repository_version_href} | Delete a repository version [**list**](RepositoriesFileVersionsApi.md#list) | **GET** {file_file_repository_href}versions/ | List repository versions [**read**](RepositoriesFileVersionsApi.md#read) | **GET** {file_file_repository_version_href} | Inspect a repository version [**repair**](RepositoriesFileVersionsApi.md#repair) | **POST** {file_file_repository_version_href}repair/ | ## delete > AsyncOperationResponse delete(file_file_repository_version_href) Delete a repository version Trigger an asynchronous task to delete a repository version. ### Example ```ruby # load the gem require 'pulp_file_client' # setup authorization PulpFileClient.configure do |config| # Configure HTTP basic authorization: basicAuth config.username = 'YOUR USERNAME' config.password = 'YOUR PASSWORD' end api_instance = PulpFileClient::RepositoriesFileVersionsApi.new file_file_repository_version_href = 'file_file_repository_version_href_example' # String | begin #Delete a repository version result = api_instance.delete(file_file_repository_version_href) p result rescue PulpFileClient::ApiError => e puts "Exception when calling RepositoriesFileVersionsApi->delete: #{e}" end ``` ### Parameters Name | Type | Description | Notes ------------- | ------------- | ------------- | ------------- **file_file_repository_version_href** | **String**| | ### Return type [**AsyncOperationResponse**](AsyncOperationResponse.md) ### Authorization [basicAuth](../README.md#basicAuth) ### HTTP request headers - **Content-Type**: Not defined - **Accept**: application/json ## list > PaginatedRepositoryVersionResponseList list(file_file_repository_href, opts) List repository versions FileRepositoryVersion represents a single file repository version. ### Example ```ruby # load the gem require 'pulp_file_client' # setup authorization PulpFileClient.configure do |config| # Configure HTTP basic authorization: basicAuth config.username = 'YOUR USERNAME' config.password = 'YOUR PASSWORD' end api_instance = PulpFileClient::RepositoriesFileVersionsApi.new file_file_repository_href = 'file_file_repository_href_example' # String | opts = { content: 'content_example', # String | Content Unit referenced by HREF content__in: 'content__in_example', # String | Content Unit referenced by HREF limit: 56, # Integer | Number of results to return per page. number: 56, # Integer | Filter results where number matches value number__gt: 56, # Integer | Filter results where number is greater than value number__gte: 56, # Integer | Filter results where number is greater than or equal to value number__lt: 56, # Integer | Filter results where number is less than value number__lte: 56, # Integer | Filter results where number is less than or equal to value number__range: [56], # Array | Filter results where number is between two comma separated values offset: 56, # Integer | The initial index from which to return the results. ordering: ['ordering_example'], # Array | Ordering pulp_created: DateTime.parse('2013-10-20T19:20:30+01:00'), # DateTime | Filter results where pulp_created matches value pulp_created__gt: DateTime.parse('2013-10-20T19:20:30+01:00'), # DateTime | Filter results where pulp_created is greater than value pulp_created__gte: DateTime.parse('2013-10-20T19:20:30+01:00'), # DateTime | Filter results where pulp_created is greater than or equal to value pulp_created__lt: DateTime.parse('2013-10-20T19:20:30+01:00'), # DateTime | Filter results where pulp_created is less than value pulp_created__lte: DateTime.parse('2013-10-20T19:20:30+01:00'), # DateTime | Filter results where pulp_created is less than or equal to value pulp_created__range: [DateTime.parse('2013-10-20T19:20:30+01:00')], # Array | Filter results where pulp_created is between two comma separated values fields: ['fields_example'], # Array | A list of fields to include in the response. exclude_fields: ['exclude_fields_example'] # Array | A list of fields to exclude from the response. } begin #List repository versions result = api_instance.list(file_file_repository_href, opts) p result rescue PulpFileClient::ApiError => e puts "Exception when calling RepositoriesFileVersionsApi->list: #{e}" end ``` ### Parameters Name | Type | Description | Notes ------------- | ------------- | ------------- | ------------- **file_file_repository_href** | **String**| | **content** | **String**| Content Unit referenced by HREF | [optional] **content__in** | **String**| Content Unit referenced by HREF | [optional] **limit** | **Integer**| Number of results to return per page. | [optional] **number** | **Integer**| Filter results where number matches value | [optional] **number__gt** | **Integer**| Filter results where number is greater than value | [optional] **number__gte** | **Integer**| Filter results where number is greater than or equal to value | [optional] **number__lt** | **Integer**| Filter results where number is less than value | [optional] **number__lte** | **Integer**| Filter results where number is less than or equal to value | [optional] **number__range** | [**Array<Integer>**](Integer.md)| Filter results where number is between two comma separated values | [optional] **offset** | **Integer**| The initial index from which to return the results. | [optional] **ordering** | [**Array<String>**](String.md)| Ordering | [optional] **pulp_created** | **DateTime**| Filter results where pulp_created matches value | [optional] **pulp_created__gt** | **DateTime**| Filter results where pulp_created is greater than value | [optional] **pulp_created__gte** | **DateTime**| Filter results where pulp_created is greater than or equal to value | [optional] **pulp_created__lt** | **DateTime**| Filter results where pulp_created is less than value | [optional] **pulp_created__lte** | **DateTime**| Filter results where pulp_created is less than or equal to value | [optional] **pulp_created__range** | [**Array<DateTime>**](DateTime.md)| Filter results where pulp_created is between two comma separated values | [optional] **fields** | [**Array<String>**](String.md)| A list of fields to include in the response. | [optional] **exclude_fields** | [**Array<String>**](String.md)| A list of fields to exclude from the response. | [optional] ### Return type [**PaginatedRepositoryVersionResponseList**](PaginatedRepositoryVersionResponseList.md) ### Authorization [basicAuth](../README.md#basicAuth) ### HTTP request headers - **Content-Type**: Not defined - **Accept**: application/json ## read > RepositoryVersionResponse read(file_file_repository_version_href, opts) Inspect a repository version FileRepositoryVersion represents a single file repository version. ### Example ```ruby # load the gem require 'pulp_file_client' # setup authorization PulpFileClient.configure do |config| # Configure HTTP basic authorization: basicAuth config.username = 'YOUR USERNAME' config.password = 'YOUR PASSWORD' end api_instance = PulpFileClient::RepositoriesFileVersionsApi.new file_file_repository_version_href = 'file_file_repository_version_href_example' # String | opts = { fields: ['fields_example'], # Array | A list of fields to include in the response. exclude_fields: ['exclude_fields_example'] # Array | A list of fields to exclude from the response. } begin #Inspect a repository version result = api_instance.read(file_file_repository_version_href, opts) p result rescue PulpFileClient::ApiError => e puts "Exception when calling RepositoriesFileVersionsApi->read: #{e}" end ``` ### Parameters Name | Type | Description | Notes ------------- | ------------- | ------------- | ------------- **file_file_repository_version_href** | **String**| | **fields** | [**Array<String>**](String.md)| A list of fields to include in the response. | [optional] **exclude_fields** | [**Array<String>**](String.md)| A list of fields to exclude from the response. | [optional] ### Return type [**RepositoryVersionResponse**](RepositoryVersionResponse.md) ### Authorization [basicAuth](../README.md#basicAuth) ### HTTP request headers - **Content-Type**: Not defined - **Accept**: application/json ## repair > AsyncOperationResponse repair(file_file_repository_version_href, repair) Trigger an asynchronous task to repair a repository version. ### Example ```ruby # load the gem require 'pulp_file_client' # setup authorization PulpFileClient.configure do |config| # Configure HTTP basic authorization: basicAuth config.username = 'YOUR USERNAME' config.password = 'YOUR PASSWORD' end api_instance = PulpFileClient::RepositoriesFileVersionsApi.new file_file_repository_version_href = 'file_file_repository_version_href_example' # String | repair = PulpFileClient::Repair.new # Repair | begin result = api_instance.repair(file_file_repository_version_href, repair) p result rescue PulpFileClient::ApiError => e puts "Exception when calling RepositoriesFileVersionsApi->repair: #{e}" end ``` ### Parameters Name | Type | Description | Notes ------------- | ------------- | ------------- | ------------- **file_file_repository_version_href** | **String**| | **repair** | [**Repair**](Repair.md)| | ### Return type [**AsyncOperationResponse**](AsyncOperationResponse.md) ### Authorization [basicAuth](../README.md#basicAuth) ### HTTP request headers - **Content-Type**: application/json, application/x-www-form-urlencoded, multipart/form-data - **Accept**: application/json