#
# Author:: Bryan McLellan <btm@loftninjas.org>
# Copyright:: Copyright (c) 2010 Bryan McLellan
# License:: Apache License, Version 2.0
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#

require 'chef/provider/service'
require 'chef/provider/service/simple'
require 'chef/mixin/command'
require 'chef/util/file_edit'

class Chef
  class Provider
    class Service
      class Upstart < Chef::Provider::Service::Simple
        UPSTART_STATE_FORMAT = /\w+ \(?(\w+)\)?[\/ ](\w+)/
       
        # Upstart does more than start or stop a service, creating multiple 'states' [1] that a service can be in.
        # In chef, when we ask a service to start, we expect it to have started before performing the next step
        # since we have top down dependencies. Which is to say we may follow witha resource next that requires
        # that service to be running. According to [2] we can trust that sending a 'goal' such as start will not
        # return until that 'goal' is reached, or some error has occured.
        #
        # [1] http://upstart.ubuntu.com/wiki/JobStates
        # [2] http://www.netsplit.com/2008/04/27/upstart-05-events/

        def initialize(new_resource, run_context)
          # TODO: re-evaluate if this is needed after integrating cookbook fix
          raise ArgumentError, "run_context cannot be nil" unless run_context
          super
          
          run_context.node
          
          @job = @new_resource.service_name
          
          if @new_resource.parameters
            @new_resource.parameters.each do |key, value|
              @job << " #{key}=#{value}"
            end
          end
          
          platform, version = Chef::Platform.find_platform_and_version(run_context.node)
          if platform == "ubuntu" && (8.04..9.04).include?(version.to_f)
            @upstart_job_dir = "/etc/event.d"
            @upstart_conf_suffix = ""
          else
            @upstart_job_dir = "/etc/init"
            @upstart_conf_suffix = ".conf"
          end

          @command_success = true # new_resource.status_command= false, means upstart used 
          @config_file_found = true 
          @upstart_command_success = true
        end

        def define_resource_requirements 
          super

          requirements.assert(:all_actions) do |a| 
            if !@command_success
              whyrun_msg = @new_resource.status_command ? "Provided status command #{@new_resource.status_command} failed." : 
                "Could not determine upstart state for service"
            end
            a.assertion { @command_success }
            # no failure here, just document the assumptions made. 
            a.whyrun "#{whyrun_msg} Assuming service installed and not running." 
          end

          requirements.assert(:all_actions) do |a| 
            a.assertion  { @config_file_found } 
            # no failure here, just document the assumptions made. 
            a.whyrun "Could not find #{@upstart_job_dir}/#{@new_resource.service_name}#{@upstart_conf_suffix}. Assuming service is disabled." 
          end
        end

        def load_current_resource
          @current_resource = Chef::Resource::Service.new(@new_resource.name)
          @current_resource.service_name(@new_resource.service_name)

          # Get running/stopped state
          # We do not support searching for a service via ps when using upstart since status is a native
          # upstart function. We will however support status_command in case someone wants to do something special.
          if @new_resource.status_command
            Chef::Log.debug("#{@new_resource} you have specified a status command, running..")

            begin
              if run_command_with_systems_locale(:command => @new_resource.status_command) == 0
                @current_resource.running true
              end
            rescue Chef::Exceptions::Exec
              @command_success = false
              @current_resource.running false
              nil
            end
          else
            begin
              if upstart_state == "running"
                @current_resource.running true
              else
                @current_resource.running false
              end
            rescue Chef::Exceptions::Exec
              @command_success = false
              @current_resource.running false
              nil
            end
          end
          # Get enabled/disabled state by reading job configuration file
          if ::File.exists?("#{@upstart_job_dir}/#{@new_resource.service_name}#{@upstart_conf_suffix}")
            Chef::Log.debug("#{@new_resource} found #{@upstart_job_dir}/#{@new_resource.service_name}#{@upstart_conf_suffix}")
            ::File.open("#{@upstart_job_dir}/#{@new_resource.service_name}#{@upstart_conf_suffix}",'r') do |file|
              while line = file.gets
                case line
                when /^start on/
                  Chef::Log.debug("#{@new_resource} enabled: #{line.chomp}")
                  @current_resource.enabled true
                  break
                when /^#start on/
                  Chef::Log.debug("#{@new_resource} disabled: #{line.chomp}")
                  @current_resource.enabled false
                  break
                end
              end
            end
          else
            @config_file_found = false
            Chef::Log.debug("#{@new_resource} did not find #{@upstart_job_dir}/#{@new_resource.service_name}#{@upstart_conf_suffix}")
            @current_resource.enabled false
          end

          @current_resource
        end

        def start_service
          # Calling start on a service that is already started will return 1
          # Our 'goal' when we call start is to ensure the service is started
          if @current_resource.running
            Chef::Log.debug("#{@new_resource} already running, not starting")
          else
            if @new_resource.start_command
              super
            else
              run_command_with_systems_locale(:command => "/sbin/start #{@job}")
            end
          end
        end

        def stop_service
          # Calling stop on a service that is already stopped will return 1
          # Our 'goal' when we call stop is to ensure the service is stopped
          unless @current_resource.running
            Chef::Log.debug("#{@new_resource} not running, not stopping")
          else
            if @new_resource.stop_command
              super
            else
              run_command_with_systems_locale(:command => "/sbin/stop #{@job}")
            end
          end
        end

        def restart_service
          if @new_resource.restart_command
            super
          # Upstart always provides restart functionality so we don't need to mimic it with stop/sleep/start.
          # Older versions of upstart would fail on restart if the service was currently stopped, check for that. LP:430883
          else @new_resource.supports[:restart]
            if @current_resource.running
              run_command_with_systems_locale(:command => "/sbin/restart #{@job}")
            else
              start_service
            end
          end
        end

        def reload_service
          if @new_resource.reload_command
            super
          else
            # upstart >= 0.6.3-4 supports reload (HUP)
            run_command_with_systems_locale(:command => "/sbin/reload #{@job}")
          end
        end

        # https://bugs.launchpad.net/upstart/+bug/94065

        def enable_service
          Chef::Log.debug("#{@new_resource} upstart lacks inherent support for enabling services, editing job config file")
          conf = Chef::Util::FileEdit.new("#{@upstart_job_dir}/#{@new_resource.service_name}#{@upstart_conf_suffix}")
          conf.search_file_replace(/^#start on/, "start on")
          conf.write_file
        end

        def disable_service
          Chef::Log.debug("#{@new_resource} upstart lacks inherent support for disabling services, editing job config file")
          conf = Chef::Util::FileEdit.new("#{@upstart_job_dir}/#{@new_resource.service_name}#{@upstart_conf_suffix}")
          conf.search_file_replace(/^start on/, "#start on")
          conf.write_file
        end

        def upstart_state
          command = "/sbin/status #{@job}"
          status = popen4(command) do |pid, stdin, stdout, stderr|
            stdout.each_line do |line|
              # rsyslog stop/waiting
              # service goal/state
              # OR
              # rsyslog (stop) waiting
              # service (goal) state
              line =~ UPSTART_STATE_FORMAT
              data = Regexp.last_match
              return data[2]
            end
          end
        end

      end
    end
  end
end