HTML

When an algorithm B says to return to another algorithm A, it implies that A called B. Upon returning to A, the implementation must continue from where it left off in calling B.

A user agent must not consider the types text/plain and application/octet-stream as having a registered plugin.

Browsers should take extreme care when interacting with external content intended for plugins. When third-party software is run with the same privileges as the user agent itself, vulnerabilities in the third-party software become as dangerous as those in the user agent.

User agents fall into several (overlapping) categories with different conformance requirements.

Web browsers and other interactive user agents

Web browsers that support the XHTML syntax must process elements and attributes from the HTML namespace found in XML documents as described in this specification, so that users can interact with them, unless the semantics of those elements have been overridden by other specifications.

A conforming XHTML processor would, upon finding an XHTML script element in an XML document, execute the script contained in that element. However, if the element is found within a transformation expressed in XSLT (assuming the user agent also supports XSLT), then the processor would instead treat the script element as an opaque element that forms part of the transform.

Web browsers that support the HTML syntax must process documents labeled with an HTML MIME type as described in this specification, so that users can interact with them.

User agents that support scripting must also be conforming implementations of the IDL fragments in this specification, as described in the Web IDL specification. [WEBIDL]

Unless explicitly stated, specifications that override the semantics of HTML elements do not override the requirements on DOM objects representing those elements. For example, the script element in the example above would still implement the HTMLScriptElement interface.

Non-interactive presentation user agents

User agents that process HTML and XHTML documents purely to render non-interactive versions of them must comply to the same conformance criteria as Web browsers, except that they are exempt from requirements regarding user interaction.

Typical examples of non-interactive presentation user agents are printers (static UAs) and overhead displays (dynamic UAs). It is expected that most static non-interactive presentation user agents will also opt to lack scripting support.

A non-interactive but dynamic presentation UA would still execute scripts, allowing forms to be dynamically submitted, and so forth. However, since the concept of "focus" is irrelevant when the user cannot interact with the document, the UA would not need to support any of the focus-related DOM APIs.

User agents with no scripting support

Implementations that do not support scripting (or which have their scripting features disabled entirely) are exempt from supporting the events and DOM interfaces mentioned in this specification. For the parts of this specification that are defined in terms of an events model or in terms of the DOM, such user agents must still act as if events and the DOM were supported.

Scripting can form an integral part of an application. Web browsers that do not support scripting, or that have scripting disabled, might be unable to fully convey the author's intent.

Conformance checkers

Conformance checkers must verify that a document conforms to the applicable conformance criteria described in this specification. Automated conformance checkers are exempt from detecting errors that require interpretation of the author's intent (for example, while a document is non-conforming if the content of a blockquote element is not a quote, conformance checkers running without the input of human judgement do not have to check that blockquote elements only contain quoted material).

Conformance checkers must check that the input document conforms when parsed without a browsing context (meaning that no scripts are run, and that the parser's scripting flag is disabled), and should also check that the input document conforms when parsed with a browsing context in which scripts execute, and that the scripts never cause non-conforming states to occur other than transiently during script execution itself. (This is only a "SHOULD" and not a "MUST" requirement because it has been proven to be impossible. [COMPUTABLE])

The term "HTML validator" can be used to refer to a conformance checker that itself conforms to the applicable requirements of this specification.

XML DTDs cannot express all the conformance requirements of this specification. Therefore, a validating XML processor and a DTD cannot constitute a conformance checker. Also, since neither of the two authoring formats defined in this specification are applications of SGML, a validating SGML system cannot constitute a conformance checker either.

To put it another way, there are three types of conformance criteria:

1. Criteria that can be expressed in a DTD.
2. Criteria that cannot be expressed by a DTD, but can still be checked by a machine.
3. Criteria that can only be checked by a human.

A conformance checker must check for the first two. A simple DTD-based validator only checks for the first class of errors and is therefore not a conforming conformance checker according to this specification.

Data mining tools

Applications and tools that process HTML and XHTML documents for reasons other than to either render the documents or check them for conformance should act in accordance with the semantics of the documents that they process.

A tool that generates document outlines but increases the nesting level for each paragraph and does not increase the nesting level for each section would not be conforming.

Authoring tools and markup generators

Authoring tools and markup generators must generate conforming documents. Conformance criteria that apply to authors also apply to authoring tools, where appropriate.

Authoring tools are exempt from the strict requirements of using elements only for their specified purpose, but only to the extent that authoring tools are not yet able to determine author intent. However, authoring tools must not automatically misuse elements or encourage their users to do so.

For example, it is not conforming to use an address element for arbitrary contact information; that element can only be used for marking up contact information for the author of the document or section. However, since an authoring tool is likely unable to determine the difference, an authoring tool is exempt from that requirement. This does not mean, though, that authoring tools can use address elements for any block of italics text (for instance); it just means that the authoring tool doesn't have to verify that when the user uses a tool for inserting contact information for a section, that the user really is doing that and not inserting something else instead.

In terms of conformance checking, an editor has to output documents that conform to the same extent that a conformance checker will verify.

When an authoring tool is used to edit a non-conforming document, it may preserve the conformance errors in sections of the document that were not edited during the editing session (i.e. an editing tool is allowed to round-trip erroneous content). However, an authoring tool must not claim that the output is conformant if errors have been so preserved.

Authoring tools are expected to come in two broad varieties: tools that work from structure or semantic data, and tools that work on a What-You-See-Is-What-You-Get media-specific editing basis (WYSIWYG).

The former is the preferred mechanism for tools that author HTML, since the structure in the source information can be used to make informed choices regarding which HTML elements and attributes are most appropriate.

However, WYSIWYG tools are legitimate. WYSIWYG tools should use elements they know are appropriate, and should not use elements that they do not know to be appropriate. This might in certain extreme cases mean limiting the use of flow elements to just a few elements, like div, b, i, and span and making liberal use of the style attribute.

All authoring tools, whether WYSIWYG or not, should make a best effort attempt at enabling users to create well-structured, semantically rich, media-independent content.

Some conformance requirements are phrased as requirements on elements, attributes, methods or objects. Such requirements fall into two categories: those describing content model restrictions, and those describing implementation behavior. Those in the former category are requirements on documents and authoring tools. Those in the second category are requirements on user agents. Similarly, some conformance requirements are phrased as requirements on authors; such requirements are to be interpreted as conformance requirements on the documents that authors produce. (In other words, this specification does not distinguish between conformance criteria on authors and conformance criteria on documents.)

Conformance requirements phrased as algorithms or specific steps may be implemented in any manner, so long as the end result is equivalent. (In particular, the algorithms defined in this specification are intended to be easy to follow, and not intended to be performant.)

User agents may impose implementation-specific limits on otherwise unconstrained inputs, e.g. to prevent denial of service attacks, to guard against running out of memory, or to work around platform-specific limitations.

2.2.1 Dependencies

This specification relies on several other underlying specifications.

XML

Implementations that support the XHTML syntax must support some version of XML, as well as its corresponding namespaces specification, because that syntax uses an XML serialization with namespaces. [XML] [XMLNS]

DOM

The Document Object Model (DOM) is a representation — a model — of a document and its content. The DOM is not just an API; the conformance criteria of HTML implementations are defined, in this specification, in terms of operations on the DOM. [DOMCORE]

Implementations must support some version of DOM Core and DOM Events, because this specification is defined in terms of the DOM, and some of the features are defined as extensions to the DOM Core interfaces. [DOMCORE] [DOMEVENTS]

In particular, the following features are defined in the DOM Core specification: [DOMCORE]

• Attr interface
• CDATASection interface
• Comment interface
• DOMImplementation interface
• Document interface
• DocumentFragment interface
• DocumentType interface
• DOMException interface
• Element interface
• Node interface
• NodeList interface
• ProcessingInstruction interface
• Text interface
• createDocument() method
• getElementById() method
• insertBefore() method
• ownerDocument attribute
• childNodes attribute
• localName attribute
• parentNode attribute
• namespaceURI attribute
• tagName attribute
• textContent attribute

The following features are defined in the DOM Events specification: [DOMEVENTS]

• Event interface
• EventTarget interface
• UIEvent interface
• click event
• target attribute

The following features are defined in the DOM Range specification: [DOMRANGE]

• Range interface
• deleteContents() method
• selectNodeContents() method
• setEnd() method
• setStart() method
• collapsed attribute
• endContainer attribute
• endOffset attribute
• startContainer attribute
• startOffset attribute

Web IDL

The IDL fragments in this specification must be interpreted as required for conforming IDL fragments, as described in the Web IDL specification. [WEBIDL]

The terms supported property indices and supported property names are used as defined in the WebIDL specification.

Except where otherwise specified, if an IDL attribute that is a floating point number type (double) is assigned an Infinity or Not-a-Number (NaN) value, a NOT_SUPPORTED_ERR exception must be raised.

Except where otherwise specified, if a method with an argument that is a floating point number type (double) is passed an Infinity or Not-a-Number (NaN) value, a NOT_SUPPORTED_ERR exception must be raised.

JavaScript

Some parts of the language described by this specification only support JavaScript as the underlying scripting language. [ECMA262]

The term "JavaScript" is used to refer to ECMA262, rather than the official term ECMAScript, since the term JavaScript is more widely known. Similarly, the MIME type used to refer to JavaScript in this specification is text/javascript, since that is the most commonly used type, despite it being an officially obsoleted type according to RFC 4329. [RFC4329]

Media Queries

Implementations must support some version of the Media Queries language. [MQ]

URIs, IRIs, IDNA

Implementations must support the semantics of URLs defined in the URI and IRI specifications, as well as the semantics of IDNA domain names defined in the Internationalizing Domain Names in Applications (IDNA) specification. [RFC3986] [RFC3987] [RFC3490]

CSS modules

While support for CSS as a whole is not required of implementations of this specification (though it is encouraged, at least for Web browsers), some features are defined in terms of specific CSS requirements.

In particular, some features require that a string be parsed as a CSS <color> value. When parsing a CSS value, user agents are required by the CSS specifications to apply some error handling rules. These apply to this specification also. [CSSCOLOR] [CSS]

For example, user agents are required to close all open constructs upon finding the end of a style sheet unexpectedly. Thus, when parsing the string "rgb(0,0,0" (with a missing close-parenthesis) for a color value, the close parenthesis is implied by this error handling rule, and a value is obtained (the color 'black'). However, the similar construct "rgb(0,0," (with both a missing parenthesis and a missing "blue" value) cannot be parsed, as it closing the open construct does not result in a viable value.

This specification does not require support of any particular network protocol, style sheet language, scripting language, or any of the DOM specifications beyond those described above. However, the language described by this specification is biased towards CSS as the styling language, JavaScript as the scripting language, and HTTP as the network protocol, and several features assume that those languages and protocols are in use.

This specification might have certain additional requirements on character encodings, image formats, audio formats, and video formats in the respective sections.

Vendor-specific proprietary user agent extensions to this specification are strongly discouraged. Documents must not use such extensions, as doing so reduces interoperability and fragments the user base, allowing only users of specific user agents to access the content in question.

If such extensions are nonetheless needed, e.g. for experimental purposes, then vendors are strongly urged to use one of the following extension mechanisms:

For markup-level features that can be limited to the XML serialization and need not be supported in the HTML serialization, vendors should use the namespace mechanism to define custom namespaces in which the non-standard elements and attributes are supported.

For markup-level features that are intended for use with the HTML syntax, extensions should be limited to new attributes of the form "x-vendor-feature", where vendor is a short string that identifies the vendor responsible for the extension, and feature is the name of the feature. New element names should not be created. Using attributes for such extensions exclusively allows extensions from multiple vendors to co-exist on the same element, which would not be possible with elements. Using the "x-vendor-feature" form allows extensions to be made without risk of conflicting with future additions to the specification.

<p>This smells of lemons!
<span x-ferret-smellovision x-ferret-smellcode="LEM01"
      x-mb-outputsmell x-mb-smell="lemon juice"></span></p>

Attribute names beginning with the two characters "x-" are reserved for user agent use and are guaranteed to never be formally added to the HTML language. For flexibility, attributes names containing underscores (the U+005F LOW LINE character) are also reserved for experimental purposes and are guaranteed to never be formally added to the HTML language.

Pages that use such attributes are by definition non-conforming.

For DOM extensions, e.g. new methods and IDL attributes, the new members should be prefixed by vendor-specific strings to prevent clashes with future versions of this specification.

For events, experimental event names should be prefixed with vendor-specific strings.

All extensions must be defined so that the use of extensions neither contradicts nor causes the non-conformance of functionality defined in the specification.

When adding new reflecting IDL attributes corresponding to content attributes of the form "x-vendor-feature", the IDL attribute should be named "vendorFeature" (i.e. the "x" is dropped from the IDL attribute's name).

When vendor-neutral extensions to this specification are needed, either this specification can be updated accordingly, or an extension specification can be written that overrides the requirements in this specification. When someone applying this specification to their activities decides that they will recognize the requirements of such an extension specification, it becomes an applicable specification for the purposes of conformance requirements in this specification.

Someone could write a specification that defines any arbitrary byte stream as conforming, and then claim that their random junk is conforming. However, that does not mean that their random junk actually is conforming for everyone's purposes: if someone else decides that that specification does not apply to their work, then they can quite legitimately say that the aforementioned random junk is just that, junk, and not conforming at all. As far as conformance goes, what matters in a particular community is what that community agrees is applicable.

User agents must treat elements and attributes that they do not understand as semantically neutral; leaving them in the DOM (for DOM processors), and styling them according to CSS (for CSS processors), but not inferring any meaning from them.

When support for a feature is disabled (e.g. as an emergency measure to mitigate a security problem, or to aid in development, or for performance reasons), user agents must act as if they had no support for the feature whatsoever, and as if the feature was not mentioned in this specification. For example, if a particular feature is accessed via an attribute in a Web IDL interface, the attribute itself would be omitted from the objects that implement that interface — leaving the attribute on the object but making it return null or throw an exception is insufficient.

Converting a string to ASCII uppercase means replacing all characters in the range U+0061 to U+007A (i.e. LATIN SMALL LETTER A to LATIN SMALL LETTER Z) with the corresponding characters in the range U+0041 to U+005A (i.e. LATIN CAPITAL LETTER A to LATIN CAPITAL LETTER Z).

Converting a string to ASCII lowercase means replacing all characters in the range U+0041 to U+005A (i.e. LATIN CAPITAL LETTER A to LATIN CAPITAL LETTER Z) with the corresponding characters in the range U+0061 to U+007A (i.e. LATIN SMALL LETTER A to LATIN SMALL LETTER Z).

2.4 UTF-8

When a user agent is required to decode a byte string as UTF-8, with error handling, it means that the byte stream must be converted to a Unicode string by interpreting it as UTF-8, except that any errors must be handled as described in the following list. Bytes in the following list are represented in hexadecimal. [RFC3629]

One byte in the range FE to FF

Overlong forms (e.g. F0 80 80 A0)

One byte in the range C0 to C1, followed by one byte in the range 80 to BF

One byte in the range F0 to F4, followed by three bytes in the range 80 to BF that represent a code point above U+10FFFF

One byte in the range F5 to F7, followed by three bytes in the range 80 to BF

One byte in the range F8 to FB, followed by four bytes in the range 80 to BF

One byte in the range FC to FD, followed by five bytes in the range 80 to BF

One byte in the range E0 to FD, followed by a byte in the range 80 to BF, not followed by a byte in the range 80 to BF

One byte in the range F0 to FD, followed by two bytes in the range 80 to BF, not followed by a byte in the range 80 to BF

One byte in the range F5 to FD, followed by three bytes in the range 80 to BF, not followed by a byte in the range 80 to BF

One byte in the range FC to FD, followed by four bytes in the range 80 to BF, not followed by a byte in the range 80 to BF

The whole sequence must be replaced by a single U+FFFD REPLACEMENT CHARACTER.

One byte in the range 80 to BF not preceded by a byte in the range 80 to FD

A sequence of bytes in the range 80 to BF that does not follow a byte in the range C0 to FD

One byte in the range C0 to FD not followed by a byte in the range 80 to BF

Each byte must be replaced with a U+FFFD REPLACEMENT CHARACTER.

For the purposes of the above requirements, an overlong form in UTF-8 is a sequence that encodes a codepoint using more bytes than the minimum needed to encode that codepoint in UTF-8.

For example, the byte string "41 98 BA 42 E2 98 43 E2 98 BA E2 98" would be converted to the string "A��B�C☺�".

Implementors are strongly urged to carefully examine any third-party libraries they might consider using to implement the parsing of syntaxes described below. For example, date libraries are likely to implement error handling behavior that differs from what is required in this specification, since error-handling behavior is often not defined in specifications that describe date syntaxes similar to those used in this specification, and thus implementations tend to vary greatly in how they handle errors.

2.5.1 Common parser idioms

The space characters, for the purposes of this specification, are U+0020 SPACE, U+0009 CHARACTER TABULATION (tab), U+000A LINE FEED (LF), U+000C FORM FEED (FF), and U+000D CARRIAGE RETURN (CR).

The White_Space characters are those that have the Unicode property "White_Space" in the Unicode PropList.txt data file. [UNICODE]

This should not be confused with the "White_Space" value (abbreviated "WS") of the "Bidi_Class" property in the Unicode.txt data file.

The alphanumeric ASCII characters are those in the ranges U+0030 DIGIT ZERO (0) to U+0039 DIGIT NINE (9), U+0041 LATIN CAPITAL LETTER A to U+005A LATIN CAPITAL LETTER Z, U+0061 LATIN SMALL LETTER A to U+007A LATIN SMALL LETTER Z.

Some of the micro-parsers described below follow the pattern of having an input variable that holds the string being parsed, and having a position variable pointing at the next character to parse in input.

For parsers based on this pattern, a step that requires the user agent to collect a sequence of characters means that the following algorithm must be run, with characters being the set of characters that can be collected:

1. Let input and position be the same variables as those of the same name in the algorithm that invoked these steps.

2. Let result be the empty string.

3. While position doesn't point past the end of input and the character at position is one of the characters, append that character to the end of result and advance position to the next character in input.

4. Return result.

The step skip whitespace means that the user agent must collect a sequence of characters that are space characters. The step skip White_Space characters means that the user agent must collect a sequence of characters that are White_Space characters. In both cases, the collected characters are not used. [UNICODE]

When a user agent is to strip line breaks from a string, the user agent must remove any U+000A LINE FEED (LF) and U+000D CARRIAGE RETURN (CR) characters from that string.

When a user agent is to strip leading and trailing whitespace from a string, the user agent must remove all space characters that are at the start or end of the string.

The code-point length of a string is the number of Unicode code points in that string.

The rules for parsing non-negative integers are as given in the following algorithm. When invoked, the steps must be followed in the order given, aborting at the first step that returns a value. This algorithm will return either zero, a positive integer, or an error.

1. Let input be the string being parsed.

2. Let position be a pointer into input, initially pointing at the start of the string.

3. Skip whitespace.

4. If position is past the end of input, return an error.

5. If the character indicated by position is a U+002B PLUS SIGN character (+), advance position to the next character. (The "+" is ignored, but it is not conforming.)

6. If position is past the end of input, return an error.

7. If the character indicated by position is not one of U+0030 DIGIT ZERO (0) to U+0039 DIGIT NINE (9), then return an error.

8. Collect a sequence of characters in the range U+0030 DIGIT ZERO (0) to U+0039 DIGIT NINE (9), and interpret the resulting sequence as a base-ten integer. Let value be that integer.

9. Return value.

The rules for parsing integers are similar to the rules for non-negative integers, and are as given in the following algorithm. When invoked, the steps must be followed in the order given, aborting at the first step that returns a value. This algorithm will return either an integer or an error.

1. Let input be the string being parsed.

2. Let position be a pointer into input, initially pointing at the start of the string.

3. Let sign have the value "positive".

4. Skip whitespace.

5. If position is past the end of input, return an error.

6. If the character indicated by position (the first character) is a U+002D HYPHEN-MINUS character (-):

   1. Let sign be "negative".
   2. Advance position to the next character.
   3. If position is past the end of input, return an error.

   Otherwise, if the character indicated by position (the first character) is a U+002B PLUS SIGN character (+):

   1. Advance position to the next character. (The "+" is ignored, but it is not conforming.)
   2. If position is past the end of input, return an error.

7. If the character indicated by position is not one of U+0030 DIGIT ZERO (0) to U+0039 DIGIT NINE (9), then return an error.

8. Collect a sequence of characters in the range U+0030 DIGIT ZERO (0) to U+0039 DIGIT NINE (9), and interpret the resulting sequence as a base-ten integer. Let value be that integer.

9. If sign is "positive", return value, otherwise return the result of subtracting value from zero.

The best representation of the number n as a floating point number is the string obtained from applying the JavaScript operator ToString to n. The JavaScript operator ToString is not uniquely determined. When there are multiple possible strings that could be obtained from the JavaScript operator ToString for a particular value, the user agent must always return the same string for that value (though it may differ from the value used by other user agents).

The rules for parsing floating point number values are as given in the following algorithm. This algorithm must be aborted at the first step that returns something. This algorithm will return either a number or an error.

1. Let input be the string being parsed.

2. Let position be a pointer into input, initially pointing at the start of the string.

3. Let value have the value 1.

4. Let divisor have the value 1.

5. Let exponent have the value 1.

6. Skip whitespace.

7. If position is past the end of input, return an error.

8. If the character indicated by position is a U+002D HYPHEN-MINUS character (-):

   1. Change value and divisor to −1.
   2. Advance position to the next character.
   3. If position is past the end of input, return an error.

9. If the character indicated by position is not one of U+0030 DIGIT ZERO (0) to U+0039 DIGIT NINE (9), then return an error.

10. Collect a sequence of characters in the range U+0030 DIGIT ZERO (0) to U+0039 DIGIT NINE (9), and interpret the resulting sequence as a base-ten integer. Multiply value by that integer.

11. If position is past the end of input, jump to the step labeled conversion.

12. If the character indicated by position is a U+002E FULL STOP (.), run these substeps:

    1. Advance position to the next character.

    2. If position is past the end of input, or if the character indicated by position is not one of U+0030 DIGIT ZERO (0) to U+0039 DIGIT NINE (9), then jump to the step labeled conversion.

    3. Fraction loop: Multiply divisor by ten.

    4. Add the value of the character indicated by position, interpreted as a base-ten digit (0..9) and divided by divisor, to value.

    5. Advance position to the next character.

    6. If position is past the end of input, then jump to the step labeled conversion.

    7. If the character indicated by position is one of U+0030 DIGIT ZERO (0) to U+0039 DIGIT NINE (9), jump back to the step labeled fraction loop in these substeps.

13. If the character indicated by position is a U+0065 LATIN SMALL LETTER E character (e) or a U+0045 LATIN CAPITAL LETTER E character (E), run these substeps:

    1. Advance position to the next character.

    2. If position is past the end of input, then jump to the step labeled conversion.

    3. If the character indicated by position is a U+002D HYPHEN-MINUS character (-):

       1. Change exponent to −1.
       2. Advance position to the next character.

       3. If position is past the end of input, then jump to the step labeled conversion.

       Otherwise, if the character indicated by position is a U+002B PLUS SIGN character (+):

       1. Advance position to the next character.

       2. If position is past the end of input, then jump to the step labeled conversion.

    4. If the character indicated by position is not one of U+0030 DIGIT ZERO (0) to U+0039 DIGIT NINE (9), then jump to the step labeled conversion.

    5. Collect a sequence of characters in the range U+0030 DIGIT ZERO (0) to U+0039 DIGIT NINE (9), and interpret the resulting sequence as a base-ten integer. Multiply exponent by that integer.

    6. Multiply value by ten raised to the exponentth power.

14. Conversion: Let S be the set of finite IEEE 754 single-precision floating point values except −0, but with two special values added: 2¹⁰²⁴ and −2¹⁰²⁴.

15. Let rounded-value be the number in S that is closest to value, selecting the number with an even significand if there are two equally close values. (The two special values 2¹⁰²⁴ and −2¹⁰²⁴ are considered to have even significands for this purpose.)

16. If rounded-value is 2¹⁰²⁴ or −2¹⁰²⁴, return an error.

17. Return rounded-value.

2.5.4.4 Percentages and lengths

The rules for parsing dimension values are as given in the following algorithm. When invoked, the steps must be followed in the order given, aborting at the first step that returns a value. This algorithm will return either a number greater than or equal to 1.0, or an error; if a number is returned, then it is further categorized as either a percentage or a length.

1. Let input be the string being parsed.

2. Let position be a pointer into input, initially pointing at the start of the string.

3. Skip whitespace.

4. If position is past the end of input, return an error.

5. If the character indicated by position is a U+002B PLUS SIGN character (+), advance position to the next character.

6. Collect a sequence of characters that are U+0030 DIGIT ZERO (0) characters, and discard them.

7. If position is past the end of input, return an error.

8. If the character indicated by position is not one of U+0031 DIGIT ONE (1) to U+0039 DIGIT NINE (9), then return an error.

9. Collect a sequence of characters in the range U+0030 DIGIT ZERO (0) to U+0039 DIGIT NINE (9), and interpret the resulting sequence as a base-ten integer. Let value be that number.

10. If position is past the end of input, return value as a length.

11. If the character indicated by position is a U+002E FULL STOP character (.):

    1. Advance position to the next character.

    2. If position is past the end of input, or if the character indicated by position is not one of U+0030 DIGIT ZERO (0) to U+0039 DIGIT NINE (9), then return value as a length.

    3. Let divisor have the value 1.

    4. Fraction loop: Multiply divisor by ten.

    5. Add the value of the character indicated by position, interpreted as a base-ten digit (0..9) and divided by divisor, to value.

    6. Advance position to the next character.

    7. If position is past the end of input, then return value as a length.

    8. If the character indicated by position is one of U+0030 DIGIT ZERO (0) to U+0039 DIGIT NINE (9), return to the step labeled fraction loop in these substeps.

12. If position is past the end of input, return value as a length.

13. If the character indicated by position is a U+0025 PERCENT SIGN character (%), return value as a percentage.

14. Return value as a length.

The rules for parsing a list of integers are as follows:

1. Let input be the string being parsed.

2. Let position be a pointer into input, initially pointing at the start of the string.

3. Let numbers be an initially empty list of integers. This list will be the result of this algorithm.

4. If there is a character in the string input at position position, and it is either a U+0020 SPACE, U+002C COMMA, or U+003B SEMICOLON character, then advance position to the next character in input, or to beyond the end of the string if there are no more characters.

5. If position points to beyond the end of input, return numbers and abort.

6. If the character in the string input at position position is a U+0020 SPACE, U+002C COMMA, or U+003B SEMICOLON character, then return to step 4.

7. Let negated be false.

8. Let value be 0.

9. Let started be false. This variable is set to true when the parser sees a number or a U+002D HYPHEN-MINUS character (-).

10. Let got number be false. This variable is set to true when the parser sees a number.

11. Let finished be false. This variable is set to true to switch parser into a mode where it ignores characters until the next separator.

12. Let bogus be false.

13. Parser: If the character in the string input at position position is:

    A U+002D HYPHEN-MINUS character

    Follow these substeps:

    1. If got number is true, let finished be true.
    2. If finished is true, skip to the next step in the overall set of steps.
    3. If started is true, let negated be false.
    4. Otherwise, if started is false and if bogus is false, let negated be true.
    5. Let started be true.

    A character in the range U+0030 DIGIT ZERO (0) to U+0039 DIGIT NINE (9)

    Follow these substeps:

    1. If finished is true, skip to the next step in the overall set of steps.
    2. Multiply value by ten.
    3. Add the value of the digit, interpreted in base ten, to value.
    4. Let started be true.
    5. Let got number be true.

    A U+0020 SPACE character

    A U+002C COMMA character

    A U+003B SEMICOLON character

    Follow these substeps:

    1. If got number is false, return the numbers list and abort. This happens if an entry in the list has no digits, as in "1,2,x,4".
    2. If negated is true, then negate value.
    3. Append value to the numbers list.
    4. Jump to step 4 in the overall set of steps.

    A character in the range U+0001 to U+001F, U+0021 to U+002B, U+002D to U+002F, U+003A, U+003C to U+0040, U+005B to U+0060, U+007b to U+007F (i.e. any other non-alphabetic ASCII character)

    Follow these substeps:

    1. If got number is true, let finished be true.
    2. If finished is true, skip to the next step in the overall set of steps.
    3. Let negated be false.

    Any other character

    Follow these substeps:

    1. If finished is true, skip to the next step in the overall set of steps.
    2. Let negated be false.
    3. Let bogus be true.
    4. If started is true, then return the numbers list, and abort. (The value in value is not appended to the list first; it is dropped.)

14. Advance position to the next character in input, or to beyond the end of the string if there are no more characters.

15. If position points to a character (and not to beyond the end of input), jump to the big Parser step above.

16. If negated is true, then negate value.

17. If got number is true, then append value to the numbers list.

18. Return the numbers list and abort.

2.5.4.6 Lists of dimensions

The rules for parsing a list of dimensions are as follows. These rules return a list of zero or more pairs consisting of a number and a unit, the unit being one of percentage, relative, and absolute.

1. Let raw input be the string being parsed.

2. If the last character in raw input is a U+002C COMMA character (,), then remove that character from raw input.

3. Split the string raw input on commas. Let raw tokens be the resulting list of tokens.

4. Let result be an empty list of number/unit pairs.

5. For each token in raw tokens, run the following substeps:

   1. Let input be the token.

   2. Let position be a pointer into input, initially pointing at the start of the string.

   3. Let value be the number 0.

   4. Let unit be absolute.

   5. If position is past the end of input, set unit to relative and jump to the last substep.

   6. If the character at position is a character in the range U+0030 DIGIT ZERO (0) to U+0039 DIGIT NINE (9), collect a sequence of characters in the range U+0030 DIGIT ZERO (0) to U+0039 DIGIT NINE (9), interpret the resulting sequence as an integer in base ten, and increment value by that integer.

   7. If the character at position is a U+002E FULL STOP character (.), run these substeps:

      1. Collect a sequence of characters consisting of space characters and characters in the range U+0030 DIGIT ZERO (0) to U+0039 DIGIT NINE (9). Let s be the resulting sequence.

      2. Remove all space characters in s.

      3. If s is not the empty string, run these subsubsteps:

         1. Let length be the number of characters in s (after the spaces were removed).

         2. Let fraction be the result of interpreting s as a base-ten integer, and then dividing that number by 10^length.

         3. Increment value by fraction.

   8. Skip whitespace.

   9. If the character at position is a U+0025 PERCENT SIGN character (%), then set unit to percentage.

      Otherwise, if the character at position is a U+002A ASTERISK character (*), then set unit to relative.

   10. Add an entry to result consisting of the number given by value and the unit given by unit.

6. Return the list result.

While the formats described here are intended to be subsets of the corresponding ISO8601 formats, this specification defines parsing rules in much more detail than ISO8601. Implementors are therefore encouraged to carefully examine any date parsing libraries before using them to implement the parsing rules described below; ISO8601 libraries might not parse dates and times in exactly the same manner. [ISO8601]

The rules to parse a month string are as follows. This will return either a year and month, or nothing. If at any point the algorithm says that it "fails", this means that it is aborted at that point and returns nothing.

1. Let input be the string being parsed.

2. Let position be a pointer into input, initially pointing at the start of the string.

3. Parse a month component to obtain year and month. If this returns nothing, then fail.

4. If position is not beyond the end of input, then fail.

5. Return year and month.

The rules to parse a month component, given an input string and a position, are as follows. This will return either a year and a month, or nothing. If at any point the algorithm says that it "fails", this means that it is aborted at that point and returns nothing.

1. Collect a sequence of characters in the range U+0030 DIGIT ZERO (0) to U+0039 DIGIT NINE (9). If the collected sequence is not at least four characters long, then fail. Otherwise, interpret the resulting sequence as a base-ten integer. Let that number be the year.

2. If year is not a number greater than zero, then fail.

3. If position is beyond the end of input or if the character at position is not a U+002D HYPHEN-MINUS character, then fail. Otherwise, move position forwards one character.

4. Collect a sequence of characters in the range U+0030 DIGIT ZERO (0) to U+0039 DIGIT NINE (9). If the collected sequence is not exactly two characters long, then fail. Otherwise, interpret the resulting sequence as a base-ten integer. Let that number be the month.

5. If month is not a number in the range 1 ≤ month ≤ 12, then fail.

6. Return year and month.

The rules to parse a date string are as follows. This will return either a date, or nothing. If at any point the algorithm says that it "fails", this means that it is aborted at that point and returns nothing.

1. Let input be the string being parsed.

2. Let position be a pointer into input, initially pointing at the start of the string.

3. Parse a date component to obtain year, month, and day. If this returns nothing, then fail.

4. If position is not beyond the end of input, then fail.

5. Let date be the date with year year, month month, and day day.

6. Return date.

The rules to parse a date component, given an input string and a position, are as follows. This will return either a year, a month, and a day, or nothing. If at any point the algorithm says that it "fails", this means that it is aborted at that point and returns nothing.

1. Parse a month component to obtain year and month. If this returns nothing, then fail.

2. Let maxday be the number of days in month month of year year.

3. If position is beyond the end of input or if the character at position is not a U+002D HYPHEN-MINUS character, then fail. Otherwise, move position forwards one character.

4. Collect a sequence of characters in the range U+0030 DIGIT ZERO (0) to U+0039 DIGIT NINE (9). If the collected sequence is not exactly two characters long, then fail. Otherwise, interpret the resulting sequence as a base-ten integer. Let that number be the day.

5. If day is not a number in the range 1 ≤ day ≤ maxday, then fail.

6. Return year, month, and day.

The rules to parse a time string are as follows. This will return either a time, or nothing. If at any point the algorithm says that it "fails", this means that it is aborted at that point and returns nothing.

1. Let input be the string being parsed.

2. Let position be a pointer into input, initially pointing at the start of the string.

3. Parse a time component to obtain hour, minute, and second. If this returns nothing, then fail.

4. If position is not beyond the end of input, then fail.

5. Let time be the time with hour hour, minute minute, and second second.

6. Return time.

The rules to parse a time component, given an input string and a position, are as follows. This will return either an hour, a minute, and a second, or nothing. If at any point the algorithm says that it "fails", this means that it is aborted at that point and returns nothing.

1. Collect a sequence of characters in the range U+0030 DIGIT ZERO (0) to U+0039 DIGIT NINE (9). If the collected sequence is not exactly two characters long, then fail. Otherwise, interpret the resulting sequence as a base-ten integer. Let that number be the hour.

2. If hour is not a number in the range 0 ≤ hour ≤ 23, then fail.

3. If position is beyond the end of input or if the character at position is not a U+003A COLON character, then fail. Otherwise, move position forwards one character.

4. Collect a sequence of characters in the range U+0030 DIGIT ZERO (0) to U+0039 DIGIT NINE (9). If the collected sequence is not exactly two characters long, then fail. Otherwise, interpret the resulting sequence as a base-ten integer. Let that number be the minute.

5. If minute is not a number in the range 0 ≤ minute ≤ 59, then fail.

6. Let second be a string with the value "0".

7. If position is not beyond the end of input and the character at position is a U+003A COLON, then run these substeps:

   1. Advance position to the next character in input.

   2. If position is beyond the end of input, or at the last character in input, or if the next two characters in input starting at position are not two characters both in the range U+0030 DIGIT ZERO (0) to U+0039 DIGIT NINE (9), then fail.

   3. Collect a sequence of characters that are either characters in the range U+0030 DIGIT ZERO (0) to U+0039 DIGIT NINE (9) or U+002E FULL STOP characters. If the collected sequence has more than one U+002E FULL STOP characters, or if the last character in the sequence is a U+002E FULL STOP character, then fail. Otherwise, let the collected string be second instead of its previous value.

8. Interpret second as a base-ten number (possibly with a fractional part). Let second be that number instead of the string version.

9. If second is not a number in the range 0 ≤ second < 60, then fail.

10. Return hour, minute, and second.

The rules to parse a local date and time string are as follows. This will return either a date and time, or nothing. If at any point the algorithm says that it "fails", this means that it is aborted at that point and returns nothing.

1. Let input be the string being parsed.

2. Let position be a pointer into input, initially pointing at the start of the string.

3. Parse a date component to obtain year, month, and day. If this returns nothing, then fail.

4. If position is beyond the end of input or if the character at position is not a U+0054 LATIN CAPITAL LETTER T character (T) then fail. Otherwise, move position forwards one character.

5. Parse a time component to obtain hour, minute, and second. If this returns nothing, then fail.

6. If position is not beyond the end of input, then fail.

7. Let date be the date with year year, month month, and day day.

8. Let time be the time with hour hour, minute minute, and second second.

9. Return date and time.

The best representation of the global date and time string datetime is the valid global date and time string representing datetime with the last character of the string not being a U+005A LATIN CAPITAL LETTER Z character (Z), even if the time zone is UTC, and with a U+002D HYPHEN-MINUS character (-) representing the sign of the time-zone offset when the time zone is UTC.

The rules to parse a global date and time string are as follows. This will return either a time in UTC, with associated time-zone offset information for round tripping or display purposes, or nothing. If at any point the algorithm says that it "fails", this means that it is aborted at that point and returns nothing.

1. Let input be the string being parsed.

2. Let position be a pointer into input, initially pointing at the start of the string.

3. Parse a date component to obtain year, month, and day. If this returns nothing, then fail.

4. If position is beyond the end of input or if the character at position is not a U+0054 LATIN CAPITAL LETTER T character (T) then fail. Otherwise, move position forwards one character.

5. Parse a time component to obtain hour, minute, and second. If this returns nothing, then fail.

6. If position is beyond the end of input, then fail.

7. Parse a time-zone offset component to obtain timezone_hours and timezone_minutes. If this returns nothing, then fail.

8. If position is not beyond the end of input, then fail.

9. Let time be the moment in time at year year, month month, day day, hours hour, minute minute, second second, subtracting timezone_hours hours and timezone_minutes minutes. That moment in time is a moment in the UTC time zone.

10. Let timezone be timezone_hours hours and timezone_minutes minutes from UTC.

11. Return time and timezone.

The rules to parse a time-zone offset component, given an input string and a position, are as follows. This will return either time-zone hours and time-zone minutes, or nothing. If at any point the algorithm says that it "fails", this means that it is aborted at that point and returns nothing.

1. If the character at position is a U+005A LATIN CAPITAL LETTER Z character (Z), then:

   1. Let timezone_hours be 0.

   2. Let timezone_minutes be 0.

   3. Advance position to the next character in input.

   Otherwise, if the character at position is either a U+002B PLUS SIGN (+) or a U+002D HYPHEN-MINUS (-), then:

   1. If the character at position is a U+002B PLUS SIGN (+), let sign be "positive". Otherwise, it's a U+002D HYPHEN-MINUS (-); let sign be "negative".

   2. Advance position to the next character in input.

   3. Collect a sequence of characters in the range U+0030 DIGIT ZERO (0) to U+0039 DIGIT NINE (9). If the collected sequence is not exactly two characters long, then fail. Otherwise, interpret the resulting sequence as a base-ten integer. Let that number be the timezone_hours.

   4. If timezone_hours is not a number in the range 0 ≤ timezone_hours ≤ 23, then fail.
   5. If sign is "negative", then negate timezone_hours.

   6. If position is beyond the end of input or if the character at position is not a U+003A COLON character, then fail. Otherwise, move position forwards one character.

   7. Collect a sequence of characters in the range U+0030 DIGIT ZERO (0) to U+0039 DIGIT NINE (9). If the collected sequence is not exactly two characters long, then fail. Otherwise, interpret the resulting sequence as a base-ten integer. Let that number be the timezone_minutes.

   8. If timezone_minutes is not a number in the range 0 ≤ timezone_minutes ≤ 59, then fail.
   9. If sign is "negative", then negate timezone_minutes.

   Otherwise, fail.

2. Return timezone_hours and timezone_minutes.

The rules to parse a week string are as follows. This will return either a week-year number and week number, or nothing. If at any point the algorithm says that it "fails", this means that it is aborted at that point and returns nothing.

1. Let input be the string being parsed.

2. Let position be a pointer into input, initially pointing at the start of the string.

3. Collect a sequence of characters in the range U+0030 DIGIT ZERO (0) to U+0039 DIGIT NINE (9). If the collected sequence is not at least four characters long, then fail. Otherwise, interpret the resulting sequence as a base-ten integer. Let that number be the year.

4. If year is not a number greater than zero, then fail.

5. If position is beyond the end of input or if the character at position is not a U+002D HYPHEN-MINUS character, then fail. Otherwise, move position forwards one character.

6. If position is beyond the end of input or if the character at position is not a U+0057 LATIN CAPITAL LETTER W character (W), then fail. Otherwise, move position forwards one character.

7. Collect a sequence of characters in the range U+0030 DIGIT ZERO (0) to U+0039 DIGIT NINE (9). If the collected sequence is not exactly two characters long, then fail. Otherwise, interpret the resulting sequence as a base-ten integer. Let that number be the week.

8. Let maxweek be the week number of the last day of year year.

9. If week is not a number in the range 1 ≤ week ≤ maxweek, then fail.

10. If position is not beyond the end of input, then fail.

11. Return the week-year number year and the week number week.

The rules to parse a date or time string are as follows. The algorithm is invoked with a flag indicating if the in attribute variant or the in content variant is to be used. The algorithm will return either a date, a time, a global date and time, or nothing. If at any point the algorithm says that it "fails", this means that it is aborted at that point and returns nothing.

1. Let input be the string being parsed.

2. Let position be a pointer into input, initially pointing at the start of the string.

3. For the in content variant: skip White_Space characters.

4. Set start position to the same position as position.

5. Set the date present and time present flags to true.

6. Parse a date component to obtain year, month, and day. If this fails, then set the date present flag to false.

7. If date present is true, and position is not beyond the end of input, and the character at position is a U+0054 LATIN CAPITAL LETTER T character (T), then advance position to the next character in input.

   Otherwise, if date present is true, and either position is beyond the end of input or the character at position is not a U+0054 LATIN CAPITAL LETTER T character (T), then set time present to false.

   Otherwise, if date present is false, set position back to the same position as start position.

8. If the time present flag is true, then parse a time component to obtain hour, minute, and second. If this returns nothing, then fail.

9. If the date present and time present flags are both true, but position is beyond the end of input, then fail.

10. If the date present and time present flags are both true, parse a time-zone offset component to obtain timezone_hours and timezone_minutes. If this returns nothing, then fail.

11. For the in content variant: skip White_Space characters.

12. If position is not beyond the end of input, then fail.

13. If the date present flag is true and the time present flag is false, then let date be the date with year year, month month, and day day, and return date.

    Otherwise, if the time present flag is true and the date present flag is false, then let time be the time with hour hour, minute minute, and second second, and return time.

    Otherwise, let time be the moment in time at year year, month month, day day, hours hour, minute minute, second second, subtracting timezone_hours hours and timezone_minutes minutes, that moment in time being a moment in the UTC time zone; let timezone be timezone_hours hours and timezone_minutes minutes from UTC; and return time and timezone.

The rules for parsing simple color values are as given in the following algorithm. When invoked, the steps must be followed in the order given, aborting at the first step that returns a value. This algorithm will return either a simple color or an error.

1. Let input be the string being parsed.

2. If input is not exactly seven characters long, then return an error.

3. If the first character in input is not a U+0023 NUMBER SIGN character (#), then return an error.

4. If the last six characters of input are not all in the range U+0030 DIGIT ZERO (0) to U+0039 DIGIT NINE (9), U+0041 LATIN CAPITAL LETTER A to U+0046 LATIN CAPITAL LETTER F, U+0061 LATIN SMALL LETTER A to U+0066 LATIN SMALL LETTER F, then return an error.

5. Let result be a simple color.

6. Interpret the second and third characters as a hexadecimal number and let the result be the red component of result.

7. Interpret the fourth and fifth characters as a hexadecimal number and let the result be the green component of result.

8. Interpret the sixth and seventh characters as a hexadecimal number and let the result be the blue component of result.

9. Return result.

The rules for serializing simple color values given a simple color are as given in the following algorithm:

1. Let result be a string consisting of a single U+0023 NUMBER SIGN character (#).

2. Convert the red, green, and blue components in turn to two-digit hexadecimal numbers using the digits U+0030 DIGIT ZERO (0) to U+0039 DIGIT NINE (9) and U+0061 LATIN SMALL LETTER A to U+0066 LATIN SMALL LETTER F, zero-padding if necessary, and append these numbers to result, in the order red, green, blue.

3. Return result, which will be a valid lowercase simple color.

Some obsolete legacy attributes parse colors in a more complicated manner, using the rules for parsing a legacy color value, which are given in the following algorithm. When invoked, the steps must be followed in the order given, aborting at the first step that returns a value. This algorithm will return either a simple color or an error.

1. Let input be the string being parsed.

2. If input is the empty string, then return an error.

3. Let keyword be a string with the same value as input.

4. Strip leading and trailing whitespace from keyword.

5. If keyword is an ASCII case-insensitive match for the string "transparent", then return an error.

6. If keyword is an ASCII case-insensitive match for one of the keywords listed in the SVG color keywords section of the CSS3 Color specification, then return the simple color corresponding to that keyword. [CSSCOLOR]

   CSS2 System Colors are not recognised.

7. If input is four characters long, and the first character in input is a U+0023 NUMBER SIGN character (#), and the last three characters of input are all in the range U+0030 DIGIT ZERO (0) to U+0039 DIGIT NINE (9), U+0041 LATIN CAPITAL LETTER A to U+0046 LATIN CAPITAL LETTER F, and U+0061 LATIN SMALL LETTER A to U+0066 LATIN SMALL LETTER F, then run these substeps:

   1. Let result be a simple color.

   2. Interpret the second character of input as a hexadecimal digit; let the red component of result be the resulting number multiplied by 17.

   3. Interpret the third character of input as a hexadecimal digit; let the green component of result be the resulting number multiplied by 17.

   4. Interpret the fourth character of input as a hexadecimal digit; let the blue component of result be the resulting number multiplied by 17.

   5. Return result.

8. Replace any characters in input that have a Unicode code point greater than U+FFFF (i.e. any characters that are not in the basic multilingual plane) with the two-character string "00".

9. If input is longer than 128 characters, truncate input, leaving only the first 128 characters.

10. If the first character in input is a U+0023 NUMBER SIGN character (#), remove it.

11. Replace any character in input that is not in the range U+0030 DIGIT ZERO (0) to U+0039 DIGIT NINE (9), U+0041 LATIN CAPITAL LETTER A to U+0046 LATIN CAPITAL LETTER F, and U+0061 LATIN SMALL LETTER A to U+0066 LATIN SMALL LETTER F with the character U+0030 DIGIT ZERO (0).

12. While input's length is zero or not a multiple of three, append a U+0030 DIGIT ZERO (0) character to input.

13. Split input into three strings of equal length, to obtain three components. Let length be the length of those components (one third the length of input).

14. If length is greater than 8, then remove the leading length-8 characters in each component, and let length be 8.

15. While length is greater than two and the first character in each component is a U+0030 DIGIT ZERO (0) character, remove that character and reduce length by one.

16. If length is still greater than two, truncate each component, leaving only the first two characters in each.

17. Let result be a simple color.

18. Interpret the first component as a hexadecimal number; let the red component of result be the resulting number.

19. Interpret the second component as a hexadecimal number; let the green component of result be the resulting number.

20. Interpret the third component as a hexadecimal number; let the blue component of result be the resulting number.

21. Return result.

When a user agent has to split a string on spaces, it must use the following algorithm:

1. Let input be the string being parsed.

2. Let position be a pointer into input, initially pointing at the start of the string.

3. Let tokens be a list of tokens, initially empty.

4. Skip whitespace

5. While position is not past the end of input:

   1. Collect a sequence of characters that are not space characters.

   2. Add the string collected in the previous step to tokens.

   3. Skip whitespace

6. Return tokens.

When a user agent has to remove a token from a string, it must use the following algorithm:

1. Let input be the string being modified.

2. Let token be the token being removed. It will not contain any space characters.

3. Let output be the output string, initially empty.

4. Let position be a pointer into input, initially pointing at the start of the string.

5. Loop: If position is beyond the end of input, abort these steps.

6. If the character at position is a space character:

   1. Append the character at position to the end of output.

   2. Advance position so it points at the next character in input.

   3. Return to the step labeled loop.

7. Otherwise, the character at position is the first character of a token. Collect a sequence of characters that are not space characters, and let that be s.

8. If s is exactly equal to token (this is a case-sensitive comparison), then:

   1. Skip whitespace (in input).

   2. Remove any space characters currently at the end of output.

   3. If position is not past the end of input, and output is not the empty string, append a single U+0020 SPACE character at the end of output.

9. Otherwise, append s to the end of output.

10. Return to the step labeled loop.

This causes any occurrences of the token to be removed from the string, and any spaces that were surrounding the token to be collapsed to a single space, except at the start and end of the string, where such spaces are removed.

When a user agent has to split a string on commas, it must use the following algorithm:

1. Let input be the string being parsed.

2. Let position be a pointer into input, initially pointing at the start of the string.

3. Let tokens be a list of tokens, initially empty.

4. Token: If position is past the end of input, jump to the last step.

5. Collect a sequence of characters that are not U+002C COMMA characters (,). Let s be the resulting sequence (which might be the empty string).

6. Remove any leading or trailing sequence of space characters from s.

7. Add s to tokens.

8. If position is not past the end of input, then the character at position is a U+002C COMMA character (,); advance position past that character.

9. Jump back to the step labeled token.

10. Return tokens.

The rules for parsing a hash-name reference to an element of type type are as follows:

1. If the string being parsed does not contain a U+0023 NUMBER SIGN character, or if the first such character in the string is the last character in the string, then return null and abort these steps.

2. Let s be the string from the character immediately after the first U+0023 NUMBER SIGN character in the string being parsed up to the end of that string.

3. Return the first element of type type that has an id attribute whose value is a case-sensitive match for s or a name attribute whose value is a compatibility caseless match for s.

To parse a URL url into its component parts, the user agent must use the parse an address algorithm defined by the IRI specification. [RFC3987]

Parsing a URL can fail. If it does not, then it results in the following components, again as defined by the IRI specification:

• <scheme>
• <host>
• <port>
• <hostport>
• <path>
• <query>
• <fragment>
• <host-specific>

To resolve a URL to an absolute URL relative to either another absolute URL or an element, the user agent must use the following steps. Resolving a URL can result in an error, in which case the URL is not resolvable.

1. Let url be the URL being resolved.

2. Let encoding be determined as follows:

   If the URL had a character encoding defined when the URL was created or defined

   The URL character encoding is as defined.

   If the URL came from a script (e.g. as an argument to a method)

   The URL character encoding is the script's URL character encoding.

   If the URL came from a DOM node (e.g. from an element)

   The node has a Document, and the URL character encoding is the document's character encoding.

3. If encoding is a UTF-16 encoding, then change the value of encoding to UTF-8.

4. If the algorithm was invoked with an absolute URL to use as the base URL, let base be that absolute URL.

   Otherwise, let base be the base URI of the element, as defined by the XML Base specification, with the base URI of the document entity being defined as the document base URL of the Document that owns the element. [XMLBASE]

   For the purposes of the XML Base specification, user agents must act as if all Document objects represented XML documents.

   It is possible for xml:base attributes to be present even in HTML fragments, as such attributes can be added dynamically using script. (Such scripts would not be conforming, however, as xml:base attributes are not allowed in HTML documents.)

   The document base URL of a Document object is the absolute URL obtained by running these substeps:

   1. Let fallback base url be the document's address.

   2. If fallback base url is about:blank, and the Document's browsing context has a creator browsing context, then let fallback base url be the document base URL of the creator Document instead.

   3. If the Document is an iframe srcdoc document, then let fallback base url be the document base URL of the Document's browsing context's browsing context container's Document instead.

   4. If there is no base element that has an href attribute, then the document base URL is fallback base url. Otherwise, let url be the value of the href attribute of the first such element.

   5. Resolve url relative to fallback base url (thus, the base href attribute isn't affected by xml:base attributes).

   6. The document base URL is the result of the previous step if it was successful; otherwise it is fallback base url.

5. Return the result of applying the resolve an address algorithm defined by the IRI specification to resolve url relative to base using encoding encoding. [RFC3987]

2.6.2 Dynamic changes to base URLs

When an xml:base attribute changes, the attribute's element, and all descendant elements, are affected by a base URL change.

When a document's document base URL changes, all elements in that document are affected by a base URL change.

When an element is moved from one document to another, if the two documents have different base URLs, then that element and all its descendants are affected by a base URL change.

When an element is affected by a base URL change, it must act as described in the following list:

If the element creates a hyperlink

If the absolute URL identified by the hyperlink is being shown to the user, or if any data derived from that URL is affecting the display, then the href attribute should be re-resolved relative to the element and the UI updated appropriately.

For example, the CSS :link/:visited pseudo-classes might have been affected.

If the hyperlink has a ping attribute and its absolute URL(s) are being shown to the user, then the ping attribute's tokens should be re-resolved relative to the element and the UI updated appropriately.

If the element is a q, blockquote, section, article, ins, or del element with a cite attribute

If the absolute URL identified by the cite attribute is being shown to the user, or if any data derived from that URL is affecting the display, then the URL should be re-resolved relative to the element and the UI updated appropriately.

Otherwise

The element is not directly affected.

Changing the base URL doesn't affect the image displayed by img elements, although subsequent accesses of the src IDL attribute from script will return a new absolute URL that might no longer correspond to the image being shown.

The attributes defined to be URL decomposition IDL attributes must act as described for the attributes with the same corresponding names in this section.

In addition, an interface with a complement of URL decomposition IDL attributes will define an input, which is a URL that the attributes act on, and a common setter action, which is a set of steps invoked when any of the attributes' setters are invoked.

The seven URL decomposition IDL attributes have similar requirements.

On getting, if the input is an absolute URL that fulfills the condition given in the "getter condition" column corresponding to the attribute in the table below, the user agent must return the part of the input URL given in the "component" column, with any prefixes specified in the "prefix" column appropriately added to the start of the string and any suffixes specified in the "suffix" column appropriately added to the end of the string. Otherwise, the attribute must return the empty string.

On setting, the new value must first be mutated as described by the "setter preprocessor" column, then mutated by %-escaping any characters in the new value that are not valid in the relevant component as given by the "component" column. Then, if the input is an absolute URL and the resulting new value fulfills the condition given in the "setter condition" column, the user agent must make a new string output by replacing the component of the URL given by the "component" column in the input URL with the new value; otherwise, the user agent must let output be equal to the input. Finally, the user agent must invoke the common setter action with the value of output.

When replacing a component in the URL, if the component is part of an optional group in the URL syntax consisting of a character followed by the component, the component (including its prefix character) must be included even if the new value is the empty string.

The previous paragraph applies in particular to the ":" before a <port> component, the "?" before a <query> component, and the "#" before a <fragment> component.

For the purposes of the above definitions, URLs must be parsed using the URL parsing rules defined in this specification.

2.7 Fetching resources

When a user agent is to fetch a resource or URL, optionally from an origin origin, and optionally with a synchronous flag, a manual redirect flag, a force same-origin flag, and/or a block cookies flag, the following steps must be run. (When a URL is to be fetched, the URL identifies a resource to be obtained.)

1. Let document be the appropriate Document as given by the following list:

   When navigating

   The active document of the source browsing context.

   When fetching resources for an element

   The element's Document.

   When fetching resources in response to a call to an API

   The entry script's document.

2. While document is is an iframe srcdoc document, let document be document's browsing context's browsing context container's Document instead.

3. Generate the address of the resource from which Request-URIs are obtained as required by HTTP for the Referer (sic) header from the document's current address of document. [HTTP]

   Remove any <fragment> component from the generated address of the resource from which Request-URIs are obtained.

   If the origin of the appropriate Document is not a scheme/host/port tuple, then the Referer (sic) header must be omitted, regardless of its value.

4. If the algorithm was not invoked with the synchronous flag, perform the remaining steps asynchronously.

5. This is the main step.

   If the resource is identified by an absolute URL, and the resource is to be obtained using an idempotent action (such as an HTTP GET or equivalent), and it is already being downloaded for other reasons (e.g. another invocation of this algorithm), and this request would be identical to the previous one (e.g. same Accept and Origin headers), and the user agent is configured such that it is to reuse the data from the existing download instead of initiating a new one, then use the results of the existing download instead of starting a new one.

   Otherwise, if the resource is identified by an absolute URL with a scheme that does not define a mechanism to obtain the resource (e.g. it is a mailto: URL) or that the user agent does not support, then act as if the resource was an HTTP 204 No Content response with no other metadata.

   Otherwise, if the resource is identified by the URL about:blank, then the resource is immediately available and consists of the empty string, with no metadata.

   Otherwise, at a time convenient to the user and the user agent, download (or otherwise obtain) the resource, applying the semantics of the relevant specifications (e.g. performing an HTTP GET or POST operation, or reading the file from disk, dereferencing javascript: URLs, etc).

   For the purposes of the Referer (sic) header, use the address of the resource from which Request-URIs are obtained generated in the earlier step.

   For the purposes of the Origin header, if the fetching algorithm was explicitly initiated from an origin, then the origin that initiated the HTTP request is origin. Otherwise, this is a request from a "privacy-sensitive" context. [ORIGIN]

6. If the algorithm was not invoked with the block cookies flag, and there are cookies to be set, then the user agent must run the following substeps:

   1. Wait until ownership of the storage mutex can be taken by this instance of the fetching algorithm.

   2. Take ownership of the storage mutex.

   3. Update the cookies. [COOKIES]

   4. Release the storage mutex so that it is once again free.

7. If the fetched resource is an HTTP redirect or equivalent, then:

   If the force same-origin flag is set and the URL of the target of the redirect does not have the same origin as the URL for which the fetch algorithm was invoked

   Abort these steps and return failure from this algorithm, as if the remote host could not be contacted.

   If the manual redirect flag is set

   Continue, using the fetched resource (the redirect) as the result of the algorithm.

   Otherwise

   First, apply any relevant requirements for redirects (such as showing any appropriate prompts). Then, redo main step, but using the target of the redirect as the resource to fetch, rather than the original resource.

   The HTTP specification requires that 301, 302, and 307 redirects, when applied to methods other than the safe methods, not be followed without user confirmation. That would be an appropriate prompt for the purposes of the requirement in the paragraph above. [HTTP]

8. If the algorithm was not invoked with the synchronous flag: When the resource is available, or if there is an error of some description, queue a task that uses the resource as appropriate. If the resource can be processed incrementally, as, for instance, with a progressively interlaced JPEG or an HTML file, additional tasks may be queued to process the data as it is downloaded. The task source for these tasks is the networking task source.

   Otherwise, return the resource or error information to the calling algorithm.

If the user agent can determine the actual length of the resource being fetched for an instance of this algorithm, and if that length is finite, then that length is the file's size. Otherwise, the subject of the algorithm (that is, the resource being fetched) has no known size. (For example, the HTTP Content-Length header might provide this information.)

The user agent must also keep track of the number of bytes downloaded for each instance of this algorithm. This number must exclude any out-of-band metadata, such as HTTP headers.

The application cache processing model introduces some changes to the networking model to handle the returning of cached resources.

The navigation processing model handles redirects itself, overriding the redirection handling that would be done by the fetching algorithm.

Whether the type sniffing rules apply to the fetched resource depends on the algorithm that invokes the rules — they are not always applicable.

2.7.1 Protocol concepts

User agents can implement a variety of transfer protocols, but this specification mostly defines behavior in terms of HTTP. [HTTP]

The HTTP GET method is equivalent to the default retrieval action of the protocol. For example, RETR in FTP. Such actions are idempotent and safe, in HTTP terms.

The HTTP response codes are equivalent to statuses in other protocols that have the same basic meanings. For example, a "file not found" error is equivalent to a 404 code, a server error is equivalent to a 5xx code, and so on.

The HTTP headers are equivalent to fields in other protocols that have the same basic meaning. For example, the HTTP authentication headers are equivalent to the authentication aspects of the FTP protocol.

2.7.2 Encrypted HTTP and related security concerns

Anything in this specification that refers to HTTP also applies to HTTP-over-TLS, as represented by URLs representing the https scheme.

User agents should report certificate errors to the user and must either refuse to download resources sent with erroneous certificates or must act as if such resources were in fact served with no encryption.

User agents should warn the user that there is a potential problem whenever the user visits a page that the user has previously visited, if the page uses less secure encryption on the second visit.

Not doing so can result in users not noticing man-in-the-middle attacks.

2.7.3 Determining the type of a resource

The Content-Type metadata of a resource must be obtained and interpreted in a manner consistent with the requirements of the Media Type Sniffing specification. [MIMESNIFF]

The sniffed type of a resource must be found in a manner consistent with the requirements given in the Media Type Sniffing specification for finding the sniffed-type of the relevant sequence of octets. [MIMESNIFF]

The rules for sniffing images specifically and the rules for distingushing if a resource is text or binary are also defined in the Media Type Sniffing specification. Both sets of rules return a MIME type as their result. [MIMESNIFF]

It is imperative that the rules in the Media Type Sniffing specification be followed exactly. When a user agent uses different heuristics for content type detection than the server expects, security problems can occur. For more details, see the Media Type Sniffing specification. [MIMESNIFF]

The algorithm for extracting an encoding from a Content-Type, given a string s, is as follows. It either returns an encoding or nothing.

1. Let position be a pointed into s, initially pointing at the start of the string.

2. Loop: Find the first seven characters in s after position that are an ASCII case-insensitive match for the word "charset". If no such match is found, return nothing and abort these steps.

3. Skip any U+0009, U+000A, U+000C, U+000D, or U+0020 characters that immediately follow the word "charset" (there might not be any).

4. If the next character is not a U+003D EQUALS SIGN ('='), then move position to point just before that next character, and jump back to the step labeled loop.

5. Skip any U+0009, U+000A, U+000C, U+000D, or U+0020 characters that immediately follow the equals sign (there might not be any).

6. Process the next character as follows:

   If it is a U+0022 QUOTATION MARK ('"') and there is a later U+0022 QUOTATION MARK ('"') in s

   If it is a U+0027 APOSTROPHE ("'") and there is a later U+0027 APOSTROPHE ("'") in s

   Return the encoding corresponding to the string between this character and the next earliest occurrence of this character.

   If it is an unmatched U+0022 QUOTATION MARK ('"')

   If it is an unmatched U+0027 APOSTROPHE ("'")

   If there is no next character

   Return nothing.

   Otherwise

   Return the encoding corresponding to the string from this character to the first U+0009, U+000A, U+000C, U+000D, U+0020, or U+003B character or the end of s, whichever comes first.

This requirement is a willful violation of the HTTP specification (for example, HTTP doesn't allow the use of single quotes and requires supporting a backslash-escape mechanism that is not supported by this algorithm), motivated by the need for backwards compatibility with legacy content. [HTTP]

In general, on getting, if the content attribute is not present, the IDL attribute must act as if the content attribute's value is the empty string; and on setting, if the content attribute is not present, it must first be added.

If a reflecting IDL attribute is a DOMString attribute whose content attribute is defined to contain a URL, then on getting, the IDL attribute must resolve the value of the content attribute relative to the element and return the resulting absolute URL if that was successful, or the empty string otherwise; and on setting, must set the content attribute to the specified literal value. If the content attribute is absent, the IDL attribute must return the default value, if the content attribute has one, or else the empty string.

If a reflecting IDL attribute is a DOMString attribute whose content attribute is defined to contain one or more URLs, then on getting, the IDL attribute must split the content attribute on spaces and return the concatenation of resolving each token URL to an absolute URL relative to the element, with a single U+0020 SPACE character between each URL, ignoring any tokens that did not resolve successfully. If the content attribute is absent, the IDL attribute must return the default value, if the content attribute has one, or else the empty string. On setting, the IDL attribute must set the content attribute to the specified literal value.

If a reflecting IDL attribute is a DOMString whose content attribute is an enumerated attribute, and the IDL attribute is limited to only known values, then, on getting, the IDL attribute must return the conforming value associated with the state the attribute is in (in its canonical case), or the empty string if the attribute is in a state that has no associated keyword value; and on setting, the content attribute must be set to the specified new value.

If a reflecting IDL attribute is a DOMString but doesn't fall into any of the above categories, then the getting and setting must be done in a transparent, case-preserving manner.

If a reflecting IDL attribute is a boolean attribute, then on getting the IDL attribute must return true if the content attribute is set, and false if it is absent. On setting, the content attribute must be removed if the IDL attribute is set to false, and must be set to the empty string if the IDL attribute is set to true. (This corresponds to the rules for boolean content attributes.)

If a reflecting IDL attribute is a signed integer type (long) then, on getting, the content attribute must be parsed according to the rules for parsing signed integers, and if that is successful, and the value is in the range of the IDL attribute's type, the resulting value must be returned. If, on the other hand, it fails or returns an out of range value, or if the attribute is absent, then the default value must be returned instead, or 0 if there is no default value. On setting, the given value must be converted to the shortest possible string representing the number as a valid integer and then that string must be used as the new content attribute value.

If a reflecting IDL attribute is a signed integer type (long) that is limited to only non-negative numbers then, on getting, the content attribute must be parsed according to the rules for parsing non-negative integers, and if that is successful, and the value is in the range of the IDL attribute's type, the resulting value must be returned. If, on the other hand, it fails or returns an out of range value, or if the attribute is absent, the default value must be returned instead, or −1 if there is no default value. On setting, if the value is negative, the user agent must fire an INDEX_SIZE_ERR exception. Otherwise, the given value must be converted to the shortest possible string representing the number as a valid non-negative integer and then that string must be used as the new content attribute value.

If a reflecting IDL attribute is an unsigned integer type (unsigned long) then, on getting, the content attribute must be parsed according to the rules for parsing non-negative integers, and if that is successful, and the value is in the range 0 to 2147483647 inclusive, the resulting value must be returned. If, on the other hand, it fails or returns an out of range value, or if the attribute is absent, the default value must be returned instead, or 0 if there is no default value. On setting, the given value must be converted to the shortest possible string representing the number as a valid non-negative integer and then that string must be used as the new content attribute value.

If a reflecting IDL attribute is an unsigned integer type (unsigned long) that is limited to only non-negative numbers greater than zero, then the behavior is similar to the previous case, but zero is not allowed. On getting, the content attribute must first be parsed according to the rules for parsing non-negative integers, and if that is successful, and the value is in the range 1 to 2147483647 inclusive, the resulting value must be returned. If, on the other hand, it fails or returns an out of range value, or if the attribute is absent, the default value must be returned instead, or 1 if there is no default value. On setting, if the value is zero, the user agent must fire an INDEX_SIZE_ERR exception. Otherwise, the given value must be converted to the shortest possible string representing the number as a valid non-negative integer and then that string must be used as the new content attribute value.

If a reflecting IDL attribute is a floating point number type (double), then, on getting, the content attribute must be parsed according to the rules for parsing floating point number values, and if that is successful, the resulting value must be returned. If, on the other hand, it fails, or if the attribute is absent, the default value must be returned instead, or 0.0 if there is no default value. On setting, the given value must be converted to the best representation of the number as a floating point number and then that string must be used as the new content attribute value.

The values Infinity and Not-a-Number (NaN) values throw an exception on setting, as defined earlier.

If a reflecting IDL attribute is of the type DOMTokenList or DOMSettableTokenList, then on getting it must return a DOMTokenList or DOMSettableTokenList object (as appropriate) whose underlying string is the element's corresponding content attribute. When the object mutates its underlying string, the content attribute must itself be immediately mutated. When the attribute is absent, then the string represented by the object is the empty string; when the object mutates this empty string, the user agent must add the corresponding content attribute, with its value set to the value it would have been set to after mutating the empty string. The same DOMTokenList or DOMSettableTokenList object must be returned every time for each attribute.

If a reflecting IDL attribute has the type HTMLElement, or an interface that descends from HTMLElement, then, on getting, it must run the following algorithm (stopping at the first point where a value is returned):

1. If the corresponding content attribute is absent, then the IDL attribute must return null.
2. Let candidate be the element that the document.getElementById() method would find when called on the content attribute's document if it was passed as its argument the current value of the corresponding content attribute.
3. If candidate is null, or if it is not type-compatible with the IDL attribute, then the IDL attribute must return null.
4. Otherwise, it must return candidate.

On setting, if the given element has an id attribute, then the content attribute must be set to the value of that id attribute. Otherwise, the IDL attribute must be set to the empty string.

The rows list is not in tree order.

An attribute that returns a collection must return the same object every time it is retrieved.

The object's supported property indices are the numbers in the range zero to one less than the number of nodes represented by the collection. If there are no such elements, then there are no supported property indices.

The length attribute must return the number of nodes represented by the collection.

The item(index) method must return the indexth node in the collection. If there is no indexth node in the collection, then the method must return null.

The supported property names consist of the values of the name attributes of each a, applet, area, embed, form, frame, frameset, iframe, img, and object element represented by the collection with a name attribute, plus the list of IDs that the elements represented by the collection have.

The namedItem(key) method must return the first node in the collection that matches the following requirements:

• It is an a, applet, area, embed, form, frame, frameset, iframe, img, or object element with a name attribute equal to key, or,
• It is an element with an ID equal to key.

If no such elements are found, then the method must return null.

The object's supported property indices and supported property names are as defined for HTMLCollection objects.

The namedItem(key) method must act according to the following algorithm:

1. Let collection be an HTMLAllCollection object rooted at the same node as the HTMLAllCollection object on which the method was invoked, whose filter matches only elements that already match the filter of the HTMLAllCollection object on which the method was invoked and that are either:

   • a, applet, area, embed, form, frame, frameset, iframe, img, or object elements with a name attribute equal to key, or,
   • elements with an ID equal to key.
2. If, at the time the method is called, there is exactly one node in collection, then return that node and stop the algorithm.
3. Otherwise, if, at the time the method is called, collection is empty, return null and stop the algorithm.
4. Otherwise, return collection.

The tags(tagName) method must return an HTMLAllCollection rooted at the same node as the HTMLAllCollection object on which the method was invoked, whose filter matches only HTML elements whose local name is the tagName argument and that already match the filter of the HTMLAllCollection object on which the method was invoked. In HTML documents, the argument must first be converted to ASCII lowercase.

The object's supported property indices are as defined for HTMLCollection objects.

The supported property names consist of the values of all the id and name attributes of all the elements represented by the collection.

The namedItem(name) method must act according to the following algorithm:

1. If, at the time the method is called, there is exactly one node in the collection that has either an id attribute or a name attribute equal to name, then return that node and stop the algorithm.
2. Otherwise, if there are no nodes in the collection that have either an id attribute or a name attribute equal to name, then return null and stop the algorithm.
3. Otherwise, create a new RadioNodeList object representing a live view of the HTMLFormControlsCollection object, further filtered so that the only nodes in the RadioNodeList object are those that have either an id attribute or a name attribute equal to name. The nodes in the RadioNodeList object must be sorted in tree order.
4. Return that RadioNodeList object.

Members of the RadioNodeList interface inherited from the NodeList interface must behave as they would on a NodeList object.

The value IDL attribute on the RadioNodeList object, on getting, must return the value returned by running the following steps:

1. Let element be the first element in tree order represented by the RadioNodeList object that is an input element whose type attribute is in the Radio Button state and whose checkedness is true. Otherwise, let it be null.

2. If element is null, or if it is an element with no value attribute, return the empty string.

3. Otherwise, return the value of element's value attribute.

On setting, the value IDL attribute must run the following steps:

1. Let element be the first element in tree order represented by the RadioNodeList object that is an input element whose type attribute is in the Radio Button state and whose value content attribute is present and equal to the new value, if any. Otherwise, let it be null.

2. If element is not null, then set its checkedness to true.

The object's supported property indices are as defined for HTMLCollection objects.

On getting, the length attribute must return the number of nodes represented by the collection.

On setting, the behavior depends on whether the new value is equal to, greater than, or less than the number of nodes represented by the collection at that time. If the number is the same, then setting the attribute must do nothing. If the new value is greater, then n new option elements with no attributes and no child nodes must be appended to the select element on which the HTMLOptionsCollection is rooted, where n is the difference between the two numbers (new value minus old value). Mutation events must be fired as if a DocumentFragment containing the new option elements had been inserted. If the new value is lower, then the last n nodes in the collection must be removed from their parent nodes, where n is the difference between the two numbers (old value minus new value).

Setting length never removes or adds any optgroup elements, and never adds new children to existing optgroup elements (though it can remove children from them).

The supported property names consist of the values of all the id and name attributes of all the elements represented by the collection.

The namedItem(name) method must act according to the following algorithm:

1. If, at the time the method is called, there is exactly one node in the collection that has either an id attribute or a name attribute equal to name, then return that node and stop the algorithm.
2. Otherwise, if there are no nodes in the collection that have either an id attribute or a name attribute equal to name, then return null and stop the algorithm.
3. Otherwise, create a new NodeList object representing a live view of the HTMLOptionsCollection object, further filtered so that the only nodes in the NodeList object are those that have either an id attribute or a name attribute equal to name. The nodes in the NodeList object must be sorted in tree order.
4. Return that NodeList object.

The add(element, before) method must act according to the following algorithm:

1. If element is not an option or optgroup element, then return and abort these steps.

2. If element is an ancestor of the select element on which the HTMLOptionsCollection is rooted, then throw a HIERARCHY_REQUEST_ERR exception.

3. If before is an element, but that element isn't a descendant of the select element on which the HTMLOptionsCollection is rooted, then throw a NOT_FOUND_ERR exception.

4. If element and before are the same element, then return and abort these steps.

5. If before is a node, then let reference be that node. Otherwise, if before is an integer, and there is a beforeth node in the collection, let reference be that node. Otherwise, let reference be null.

6. If reference is not null, let parent be the parent node of reference. Otherwise, let parent be the select element on which the HTMLOptionsCollection is rooted.

7. Act as if the DOM Core insertBefore() method was invoked on the parent node, with element as the first argument and reference as the second argument.