# frozen_string_literal: true
# Copyright (c) 2017-2018 THL A29 Limited, a Tencent company. All Rights Reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
module TencentCloud
module Cynosdb
module V20190107
# 集群支持的功能
class Ability < TencentCloud::Common::AbstractModel
# @param IsSupportSlaveZone: 是否支持从可用区
# @type IsSupportSlaveZone: String
# @param NonsupportSlaveZoneReason: 不支持从可用区的原因
# 注意：此字段可能返回 null，表示取不到有效值。
# @type NonsupportSlaveZoneReason: String
# @param IsSupportRo: 是否支持RO实例
# @type IsSupportRo: String
# @param NonsupportRoReason: 不支持RO实例的原因
# 注意：此字段可能返回 null，表示取不到有效值。
# @type NonsupportRoReason: String
attr_accessor :IsSupportSlaveZone, :NonsupportSlaveZoneReason, :IsSupportRo, :NonsupportRoReason
def initialize(issupportslavezone=nil, nonsupportslavezonereason=nil, issupportro=nil, nonsupportroreason=nil)
@IsSupportSlaveZone = issupportslavezone
@NonsupportSlaveZoneReason = nonsupportslavezonereason
@IsSupportRo = issupportro
@NonsupportRoReason = nonsupportroreason
end
def deserialize(params)
@IsSupportSlaveZone = params['IsSupportSlaveZone']
@NonsupportSlaveZoneReason = params['NonsupportSlaveZoneReason']
@IsSupportRo = params['IsSupportRo']
@NonsupportRoReason = params['NonsupportRoReason']
end
end
# 数据库账号信息
class Account < TencentCloud::Common::AbstractModel
# @param AccountName: 数据库账号名
# @type AccountName: String
# @param Description: 数据库账号描述
# @type Description: String
# @param CreateTime: 创建时间
# @type CreateTime: String
# @param UpdateTime: 更新时间
# @type UpdateTime: String
# @param Host: 主机
# @type Host: String
# @param MaxUserConnections: 用户最大连接数
# @type MaxUserConnections: Integer
attr_accessor :AccountName, :Description, :CreateTime, :UpdateTime, :Host, :MaxUserConnections
def initialize(accountname=nil, description=nil, createtime=nil, updatetime=nil, host=nil, maxuserconnections=nil)
@AccountName = accountname
@Description = description
@CreateTime = createtime
@UpdateTime = updatetime
@Host = host
@MaxUserConnections = maxuserconnections
end
def deserialize(params)
@AccountName = params['AccountName']
@Description = params['Description']
@CreateTime = params['CreateTime']
@UpdateTime = params['UpdateTime']
@Host = params['Host']
@MaxUserConnections = params['MaxUserConnections']
end
end
# 账号参数
class AccountParam < TencentCloud::Common::AbstractModel
# @param ParamName: 参数名称，当前仅支持参数：max_user_connections
# @type ParamName: String
# @param ParamValue: 参数值
# @type ParamValue: String
attr_accessor :ParamName, :ParamValue
def initialize(paramname=nil, paramvalue=nil)
@ParamName = paramname
@ParamValue = paramvalue
end
def deserialize(params)
@ParamName = params['ParamName']
@ParamValue = params['ParamValue']
end
end
# ActivateInstance请求参数结构体
class ActivateInstanceRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param InstanceIdList: 实例 ID 列表，单个实例 ID 格式如：cynosdbmysql-ins-n7ocdslw，与TDSQL-C MySQL数据库控制台页面中显示的实例 ID 相同，可使用 查询实例列表 接口获取，其值为输出参数中字段 InstanceId 的值。
# @type InstanceIdList: Array
attr_accessor :ClusterId, :InstanceIdList
def initialize(clusterid=nil, instanceidlist=nil)
@ClusterId = clusterid
@InstanceIdList = instanceidlist
end
def deserialize(params)
@ClusterId = params['ClusterId']
@InstanceIdList = params['InstanceIdList']
end
end
# ActivateInstance返回参数结构体
class ActivateInstanceResponse < TencentCloud::Common::AbstractModel
# @param FlowId: 任务流id
# @type FlowId: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :FlowId, :RequestId
def initialize(flowid=nil, requestid=nil)
@FlowId = flowid
@RequestId = requestid
end
def deserialize(params)
@FlowId = params['FlowId']
@RequestId = params['RequestId']
end
end
# AddClusterSlaveZone请求参数结构体
class AddClusterSlaveZoneRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param SlaveZone: 从可用区
# @type SlaveZone: String
attr_accessor :ClusterId, :SlaveZone
def initialize(clusterid=nil, slavezone=nil)
@ClusterId = clusterid
@SlaveZone = slavezone
end
def deserialize(params)
@ClusterId = params['ClusterId']
@SlaveZone = params['SlaveZone']
end
end
# AddClusterSlaveZone返回参数结构体
class AddClusterSlaveZoneResponse < TencentCloud::Common::AbstractModel
# @param FlowId: 异步FlowId
# @type FlowId: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :FlowId, :RequestId
def initialize(flowid=nil, requestid=nil)
@FlowId = flowid
@RequestId = requestid
end
def deserialize(params)
@FlowId = params['FlowId']
@RequestId = params['RequestId']
end
end
# AddInstances请求参数结构体
class AddInstancesRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param Cpu: Cpu核数
# @type Cpu: Integer
# @param Memory: 内存，单位为GB
# @type Memory: Integer
# @param ReadOnlyCount: 新增只读实例数，取值范围为[0,4]
# @type ReadOnlyCount: Integer
# @param InstanceGrpId: 实例组ID，在已有RO组中新增实例时使用，不传则新增RO组。当前版本不建议传输该值。
# @type InstanceGrpId: String
# @param VpcId: 所属VPC网络ID，该参数已废弃
# @type VpcId: String
# @param SubnetId: 所属子网ID，如果设置了VpcId，则SubnetId必填。该参数已废弃。
# @type SubnetId: String
# @param Port: 新增RO组时使用的Port，取值范围为[0,65535)
# @type Port: Integer
# @param InstanceName: 实例名称，字符串长度范围为[0,64)，取值范围为大小写字母，0-9数字，'_','-','.'
# @type InstanceName: String
# @param AutoVoucher: 是否自动选择代金券 1是 0否 默认为0
# @type AutoVoucher: Integer
# @param DbType: 数据库类型，取值范围:
# <li> MYSQL </li>
# @type DbType: String
# @param OrderSource: 订单来源，字符串长度范围为[0,64)
# @type OrderSource: String
# @param DealMode: 交易模式 0-下单并支付 1-下单
# @type DealMode: Integer
# @param ParamTemplateId: 参数模版ID
# @type ParamTemplateId: Integer
# @param InstanceParams: 参数列表，ParamTemplateId 传入时InstanceParams才有效
# @type InstanceParams: Array
attr_accessor :ClusterId, :Cpu, :Memory, :ReadOnlyCount, :InstanceGrpId, :VpcId, :SubnetId, :Port, :InstanceName, :AutoVoucher, :DbType, :OrderSource, :DealMode, :ParamTemplateId, :InstanceParams
def initialize(clusterid=nil, cpu=nil, memory=nil, readonlycount=nil, instancegrpid=nil, vpcid=nil, subnetid=nil, port=nil, instancename=nil, autovoucher=nil, dbtype=nil, ordersource=nil, dealmode=nil, paramtemplateid=nil, instanceparams=nil)
@ClusterId = clusterid
@Cpu = cpu
@Memory = memory
@ReadOnlyCount = readonlycount
@InstanceGrpId = instancegrpid
@VpcId = vpcid
@SubnetId = subnetid
@Port = port
@InstanceName = instancename
@AutoVoucher = autovoucher
@DbType = dbtype
@OrderSource = ordersource
@DealMode = dealmode
@ParamTemplateId = paramtemplateid
@InstanceParams = instanceparams
end
def deserialize(params)
@ClusterId = params['ClusterId']
@Cpu = params['Cpu']
@Memory = params['Memory']
@ReadOnlyCount = params['ReadOnlyCount']
@InstanceGrpId = params['InstanceGrpId']
@VpcId = params['VpcId']
@SubnetId = params['SubnetId']
@Port = params['Port']
@InstanceName = params['InstanceName']
@AutoVoucher = params['AutoVoucher']
@DbType = params['DbType']
@OrderSource = params['OrderSource']
@DealMode = params['DealMode']
@ParamTemplateId = params['ParamTemplateId']
unless params['InstanceParams'].nil?
@InstanceParams = []
params['InstanceParams'].each do |i|
modifyparamitem_tmp = ModifyParamItem.new
modifyparamitem_tmp.deserialize(i)
@InstanceParams << modifyparamitem_tmp
end
end
end
end
# AddInstances返回参数结构体
class AddInstancesResponse < TencentCloud::Common::AbstractModel
# @param TranId: 冻结流水，一次开通一个冻结流水。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TranId: String
# @param DealNames: 后付费订单号。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DealNames: Array
# @param ResourceIds: 发货资源id列表。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ResourceIds: Array
# @param BigDealIds: 大订单号
# 注意：此字段可能返回 null，表示取不到有效值。
# @type BigDealIds: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TranId, :DealNames, :ResourceIds, :BigDealIds, :RequestId
def initialize(tranid=nil, dealnames=nil, resourceids=nil, bigdealids=nil, requestid=nil)
@TranId = tranid
@DealNames = dealnames
@ResourceIds = resourceids
@BigDealIds = bigdealids
@RequestId = requestid
end
def deserialize(params)
@TranId = params['TranId']
@DealNames = params['DealNames']
@ResourceIds = params['ResourceIds']
@BigDealIds = params['BigDealIds']
@RequestId = params['RequestId']
end
end
# 数据库地址
class Addr < TencentCloud::Common::AbstractModel
# @param IP: IP
# @type IP: String
# @param Port: 端口
# @type Port: Integer
attr_accessor :IP, :Port
def initialize(ip=nil, port=nil)
@IP = ip
@Port = port
end
def deserialize(params)
@IP = params['IP']
@Port = params['Port']
end
end
# AssociateSecurityGroups请求参数结构体
class AssociateSecurityGroupsRequest < TencentCloud::Common::AbstractModel
# @param InstanceIds: 实例组ID数组
# @type InstanceIds: Array
# @param SecurityGroupIds: 要修改的安全组ID列表，一个或者多个安全组Id组成的数组。
# @type SecurityGroupIds: Array
# @param Zone: 可用区
# @type Zone: String
attr_accessor :InstanceIds, :SecurityGroupIds, :Zone
def initialize(instanceids=nil, securitygroupids=nil, zone=nil)
@InstanceIds = instanceids
@SecurityGroupIds = securitygroupids
@Zone = zone
end
def deserialize(params)
@InstanceIds = params['InstanceIds']
@SecurityGroupIds = params['SecurityGroupIds']
@Zone = params['Zone']
end
end
# AssociateSecurityGroups返回参数结构体
class AssociateSecurityGroupsResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# 审计日志详细信息
class AuditLog < TencentCloud::Common::AbstractModel
# @param AffectRows: 影响行数。
# @type AffectRows: Integer
# @param ErrCode: 错误码。
# @type ErrCode: Integer
# @param SqlType: SQL类型。
# @type SqlType: String
# @param TableName: 表名称。
# @type TableName: String
# @param InstanceName: 实例名称。
# @type InstanceName: String
# @param PolicyName: 审计策略名称。
# @type PolicyName: String
# @param DBName: 数据库名称。
# @type DBName: String
# @param Sql: SQL语句。
# @type Sql: String
# @param Host: 客户端地址。
# @type Host: String
# @param User: 用户名。
# @type User: String
# @param ExecTime: 执行时间。
# @type ExecTime: Integer
# @param Timestamp: 时间戳。
# @type Timestamp: String
# @param SentRows: 发送行数。
# @type SentRows: Integer
# @param ThreadId: 执行线程ID。
# @type ThreadId: Integer
attr_accessor :AffectRows, :ErrCode, :SqlType, :TableName, :InstanceName, :PolicyName, :DBName, :Sql, :Host, :User, :ExecTime, :Timestamp, :SentRows, :ThreadId
def initialize(affectrows=nil, errcode=nil, sqltype=nil, tablename=nil, instancename=nil, policyname=nil, dbname=nil, sql=nil, host=nil, user=nil, exectime=nil, timestamp=nil, sentrows=nil, threadid=nil)
@AffectRows = affectrows
@ErrCode = errcode
@SqlType = sqltype
@TableName = tablename
@InstanceName = instancename
@PolicyName = policyname
@DBName = dbname
@Sql = sql
@Host = host
@User = user
@ExecTime = exectime
@Timestamp = timestamp
@SentRows = sentrows
@ThreadId = threadid
end
def deserialize(params)
@AffectRows = params['AffectRows']
@ErrCode = params['ErrCode']
@SqlType = params['SqlType']
@TableName = params['TableName']
@InstanceName = params['InstanceName']
@PolicyName = params['PolicyName']
@DBName = params['DBName']
@Sql = params['Sql']
@Host = params['Host']
@User = params['User']
@ExecTime = params['ExecTime']
@Timestamp = params['Timestamp']
@SentRows = params['SentRows']
@ThreadId = params['ThreadId']
end
end
# 审计日志文件
class AuditLogFile < TencentCloud::Common::AbstractModel
# @param FileName: 审计日志文件名称
# @type FileName: String
# @param CreateTime: 审计日志文件创建时间。格式为 : "2019-03-20 17:09:13"。
# @type CreateTime: String
# @param Status: 文件状态值。可能返回的值为：
# "creating" - 生成中;
# "failed" - 创建失败;
# "success" - 已生成;
# @type Status: String
# @param FileSize: 文件大小，单位为 KB。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type FileSize: Integer
# @param DownloadUrl: 审计日志下载地址。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DownloadUrl: String
# @param ErrMsg: 错误信息。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ErrMsg: String
attr_accessor :FileName, :CreateTime, :Status, :FileSize, :DownloadUrl, :ErrMsg
def initialize(filename=nil, createtime=nil, status=nil, filesize=nil, downloadurl=nil, errmsg=nil)
@FileName = filename
@CreateTime = createtime
@Status = status
@FileSize = filesize
@DownloadUrl = downloadurl
@ErrMsg = errmsg
end
def deserialize(params)
@FileName = params['FileName']
@CreateTime = params['CreateTime']
@Status = params['Status']
@FileSize = params['FileSize']
@DownloadUrl = params['DownloadUrl']
@ErrMsg = params['ErrMsg']
end
end
# 审计日志过滤条件。查询审计日志时，用户过滤返回的审计日志。
class AuditLogFilter < TencentCloud::Common::AbstractModel
# @param Host: 客户端地址。
# @type Host: Array
# @param User: 用户名。
# @type User: Array
# @param DBName: 数据库名称。
# @type DBName: Array
# @param TableName: 表名称。
# @type TableName: Array
# @param PolicyName: 审计策略名称。
# @type PolicyName: Array
# @param Sql: SQL 语句。支持模糊匹配。
# @type Sql: String
# @param SqlType: SQL 类型。目前支持："SELECT", "INSERT", "UPDATE", "DELETE", "CREATE", "DROP", "ALTER", "SET", "REPLACE", "EXECUTE"。
# @type SqlType: String
# @param ExecTime: 执行时间。单位为：ms。表示筛选执行时间大于该值的审计日志。
# @type ExecTime: Integer
# @param AffectRows: 影响行数。表示筛选影响行数大于该值的审计日志。
# @type AffectRows: Integer
# @param SqlTypes: SQL 类型。支持多个类型同时查询。目前支持："SELECT", "INSERT", "UPDATE", "DELETE", "CREATE", "DROP", "ALTER", "SET", "REPLACE", "EXECUTE"。
# @type SqlTypes: Array
# @param Sqls: SQL 语句。支持传递多个sql语句。
# @type Sqls: Array
# @param SentRows: 返回行数。
# @type SentRows: Integer
# @param ThreadId: 线程ID。
# @type ThreadId: Array
attr_accessor :Host, :User, :DBName, :TableName, :PolicyName, :Sql, :SqlType, :ExecTime, :AffectRows, :SqlTypes, :Sqls, :SentRows, :ThreadId
def initialize(host=nil, user=nil, dbname=nil, tablename=nil, policyname=nil, sql=nil, sqltype=nil, exectime=nil, affectrows=nil, sqltypes=nil, sqls=nil, sentrows=nil, threadid=nil)
@Host = host
@User = user
@DBName = dbname
@TableName = tablename
@PolicyName = policyname
@Sql = sql
@SqlType = sqltype
@ExecTime = exectime
@AffectRows = affectrows
@SqlTypes = sqltypes
@Sqls = sqls
@SentRows = sentrows
@ThreadId = threadid
end
def deserialize(params)
@Host = params['Host']
@User = params['User']
@DBName = params['DBName']
@TableName = params['TableName']
@PolicyName = params['PolicyName']
@Sql = params['Sql']
@SqlType = params['SqlType']
@ExecTime = params['ExecTime']
@AffectRows = params['AffectRows']
@SqlTypes = params['SqlTypes']
@Sqls = params['Sqls']
@SentRows = params['SentRows']
@ThreadId = params['ThreadId']
end
end
# 规则审计的过滤条件
class AuditRuleFilters < TencentCloud::Common::AbstractModel
# @param RuleFilters: 单条审计规则。
# @type RuleFilters: Array
attr_accessor :RuleFilters
def initialize(rulefilters=nil)
@RuleFilters = rulefilters
end
def deserialize(params)
unless params['RuleFilters'].nil?
@RuleFilters = []
params['RuleFilters'].each do |i|
rulefilters_tmp = RuleFilters.new
rulefilters_tmp.deserialize(i)
@RuleFilters << rulefilters_tmp
end
end
end
end
# 审计规则模版的详情
class AuditRuleTemplateInfo < TencentCloud::Common::AbstractModel
# @param RuleTemplateId: 规则模版ID。
# @type RuleTemplateId: String
# @param RuleTemplateName: 规则模版名称。
# @type RuleTemplateName: String
# @param RuleFilters: 规则模版的过滤条件
# @type RuleFilters: Array
# @param Description: 规则模版描述。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Description: String
# @param CreateAt: 规则模版创建时间。
# @type CreateAt: String
attr_accessor :RuleTemplateId, :RuleTemplateName, :RuleFilters, :Description, :CreateAt
def initialize(ruletemplateid=nil, ruletemplatename=nil, rulefilters=nil, description=nil, createat=nil)
@RuleTemplateId = ruletemplateid
@RuleTemplateName = ruletemplatename
@RuleFilters = rulefilters
@Description = description
@CreateAt = createat
end
def deserialize(params)
@RuleTemplateId = params['RuleTemplateId']
@RuleTemplateName = params['RuleTemplateName']
unless params['RuleFilters'].nil?
@RuleFilters = []
params['RuleFilters'].each do |i|
rulefilters_tmp = RuleFilters.new
rulefilters_tmp.deserialize(i)
@RuleFilters << rulefilters_tmp
end
end
@Description = params['Description']
@CreateAt = params['CreateAt']
end
end
# 备份文件信息
class BackupFileInfo < TencentCloud::Common::AbstractModel
# @param SnapshotId: 快照文件ID，已废弃，请使用BackupId
# @type SnapshotId: Integer
# @param FileName: 备份文件名
# @type FileName: String
# @param FileSize: 备份文件大小
# @type FileSize: Integer
# @param StartTime: 备份开始时间
# @type StartTime: String
# @param FinishTime: 备份完成时间
# @type FinishTime: String
# @param BackupType: 备份类型：snapshot，快照备份；logic，逻辑备份
# @type BackupType: String
# @param BackupMethod: 备份方式：auto，自动备份；manual，手动备份
# @type BackupMethod: String
# @param BackupStatus: 备份文件状态：success：备份成功；fail：备份失败；creating：备份文件创建中；deleting：备份文件删除中
# @type BackupStatus: String
# @param SnapshotTime: 备份文件时间
# @type SnapshotTime: String
# @param BackupId: 备份ID
# 注意：此字段可能返回 null，表示取不到有效值。
# @type BackupId: Integer
# @param SnapShotType: 快照类型，可选值：full，全量；increment，增量
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SnapShotType: String
# @param BackupName: 备份文件备注
# 注意：此字段可能返回 null，表示取不到有效值。
# @type BackupName: String
attr_accessor :SnapshotId, :FileName, :FileSize, :StartTime, :FinishTime, :BackupType, :BackupMethod, :BackupStatus, :SnapshotTime, :BackupId, :SnapShotType, :BackupName
def initialize(snapshotid=nil, filename=nil, filesize=nil, starttime=nil, finishtime=nil, backuptype=nil, backupmethod=nil, backupstatus=nil, snapshottime=nil, backupid=nil, snapshottype=nil, backupname=nil)
@SnapshotId = snapshotid
@FileName = filename
@FileSize = filesize
@StartTime = starttime
@FinishTime = finishtime
@BackupType = backuptype
@BackupMethod = backupmethod
@BackupStatus = backupstatus
@SnapshotTime = snapshottime
@BackupId = backupid
@SnapShotType = snapshottype
@BackupName = backupname
end
def deserialize(params)
@SnapshotId = params['SnapshotId']
@FileName = params['FileName']
@FileSize = params['FileSize']
@StartTime = params['StartTime']
@FinishTime = params['FinishTime']
@BackupType = params['BackupType']
@BackupMethod = params['BackupMethod']
@BackupStatus = params['BackupStatus']
@SnapshotTime = params['SnapshotTime']
@BackupId = params['BackupId']
@SnapShotType = params['SnapShotType']
@BackupName = params['BackupName']
end
end
# 计费资源信息
class BillingResourceInfo < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param InstanceIds: 实例ID列表
# @type InstanceIds: Array
# @param DealName: 订单ID
# @type DealName: String
attr_accessor :ClusterId, :InstanceIds, :DealName
def initialize(clusterid=nil, instanceids=nil, dealname=nil)
@ClusterId = clusterid
@InstanceIds = instanceids
@DealName = dealname
end
def deserialize(params)
@ClusterId = params['ClusterId']
@InstanceIds = params['InstanceIds']
@DealName = params['DealName']
end
end
# Binlog描述
class BinlogItem < TencentCloud::Common::AbstractModel
# @param FileName: Binlog文件名称
# @type FileName: String
# @param FileSize: 文件大小，单位：字节
# @type FileSize: Integer
# @param StartTime: 事务最早时间
# @type StartTime: String
# @param FinishTime: 事务最晚时间
# @type FinishTime: String
# @param BinlogId: Binlog文件ID
# @type BinlogId: Integer
attr_accessor :FileName, :FileSize, :StartTime, :FinishTime, :BinlogId
def initialize(filename=nil, filesize=nil, starttime=nil, finishtime=nil, binlogid=nil)
@FileName = filename
@FileSize = filesize
@StartTime = starttime
@FinishTime = finishtime
@BinlogId = binlogid
end
def deserialize(params)
@FileName = params['FileName']
@FileSize = params['FileSize']
@StartTime = params['StartTime']
@FinishTime = params['FinishTime']
@BinlogId = params['BinlogId']
end
end
# CloseAuditService请求参数结构体
class CloseAuditServiceRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID。
# @type InstanceId: String
attr_accessor :InstanceId
def initialize(instanceid=nil)
@InstanceId = instanceid
end
def deserialize(params)
@InstanceId = params['InstanceId']
end
end
# CloseAuditService返回参数结构体
class CloseAuditServiceResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# 集群实例信息
class ClusterInstanceDetail < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param InstanceName: 实例名称
# @type InstanceName: String
# @param InstanceType: 引擎类型
# @type InstanceType: String
# @param InstanceStatus: 实例状态
# @type InstanceStatus: String
# @param InstanceStatusDesc: 实例状态描述
# @type InstanceStatusDesc: String
# @param InstanceCpu: cpu核数
# @type InstanceCpu: Integer
# @param InstanceMemory: 内存
# @type InstanceMemory: Integer
# @param InstanceStorage: 硬盘
# @type InstanceStorage: Integer
# @param InstanceRole: 实例角色
# @type InstanceRole: String
attr_accessor :InstanceId, :InstanceName, :InstanceType, :InstanceStatus, :InstanceStatusDesc, :InstanceCpu, :InstanceMemory, :InstanceStorage, :InstanceRole
def initialize(instanceid=nil, instancename=nil, instancetype=nil, instancestatus=nil, instancestatusdesc=nil, instancecpu=nil, instancememory=nil, instancestorage=nil, instancerole=nil)
@InstanceId = instanceid
@InstanceName = instancename
@InstanceType = instancetype
@InstanceStatus = instancestatus
@InstanceStatusDesc = instancestatusdesc
@InstanceCpu = instancecpu
@InstanceMemory = instancememory
@InstanceStorage = instancestorage
@InstanceRole = instancerole
end
def deserialize(params)
@InstanceId = params['InstanceId']
@InstanceName = params['InstanceName']
@InstanceType = params['InstanceType']
@InstanceStatus = params['InstanceStatus']
@InstanceStatusDesc = params['InstanceStatusDesc']
@InstanceCpu = params['InstanceCpu']
@InstanceMemory = params['InstanceMemory']
@InstanceStorage = params['InstanceStorage']
@InstanceRole = params['InstanceRole']
end
end
# 参数修改记录
class ClusterParamModifyLog < TencentCloud::Common::AbstractModel
# @param ParamName: 参数名称
# @type ParamName: String
# @param CurrentValue: 当前值
# @type CurrentValue: String
# @param UpdateValue: 修改后的值
# @type UpdateValue: String
# @param Status: 修改状态
# @type Status: String
# @param CreateTime: 创建时间
# @type CreateTime: String
# @param UpdateTime: 更新时间
# @type UpdateTime: String
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param InstanceId: 实例ID
# @type InstanceId: String
attr_accessor :ParamName, :CurrentValue, :UpdateValue, :Status, :CreateTime, :UpdateTime, :ClusterId, :InstanceId
def initialize(paramname=nil, currentvalue=nil, updatevalue=nil, status=nil, createtime=nil, updatetime=nil, clusterid=nil, instanceid=nil)
@ParamName = paramname
@CurrentValue = currentvalue
@UpdateValue = updatevalue
@Status = status
@CreateTime = createtime
@UpdateTime = updatetime
@ClusterId = clusterid
@InstanceId = instanceid
end
def deserialize(params)
@ParamName = params['ParamName']
@CurrentValue = params['CurrentValue']
@UpdateValue = params['UpdateValue']
@Status = params['Status']
@CreateTime = params['CreateTime']
@UpdateTime = params['UpdateTime']
@ClusterId = params['ClusterId']
@InstanceId = params['InstanceId']
end
end
# CreateAccounts请求参数结构体
class CreateAccountsRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群id
# @type ClusterId: String
# @param Accounts: 新账户列表
# @type Accounts: Array
attr_accessor :ClusterId, :Accounts
def initialize(clusterid=nil, accounts=nil)
@ClusterId = clusterid
@Accounts = accounts
end
def deserialize(params)
@ClusterId = params['ClusterId']
unless params['Accounts'].nil?
@Accounts = []
params['Accounts'].each do |i|
newaccount_tmp = NewAccount.new
newaccount_tmp.deserialize(i)
@Accounts << newaccount_tmp
end
end
end
end
# CreateAccounts返回参数结构体
class CreateAccountsResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# CreateAuditLogFile请求参数结构体
class CreateAuditLogFileRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param StartTime: 开始时间，格式为："2017-07-12 10:29:20"。
# @type StartTime: String
# @param EndTime: 结束时间，格式为："2017-07-12 10:29:20"。
# @type EndTime: String
# @param Order: 排序方式。支持值包括："ASC" - 升序，"DESC" - 降序。
# @type Order: String
# @param OrderBy: 排序字段。支持值包括：
# "timestamp" - 时间戳；
# "affectRows" - 影响行数；
# "execTime" - 执行时间。
# @type OrderBy: String
# @param Filter: 过滤条件。可按设置的过滤条件过滤日志。
# @type Filter: :class:`Tencentcloud::Cynosdb.v20190107.models.AuditLogFilter`
attr_accessor :InstanceId, :StartTime, :EndTime, :Order, :OrderBy, :Filter
def initialize(instanceid=nil, starttime=nil, endtime=nil, order=nil, orderby=nil, filter=nil)
@InstanceId = instanceid
@StartTime = starttime
@EndTime = endtime
@Order = order
@OrderBy = orderby
@Filter = filter
end
def deserialize(params)
@InstanceId = params['InstanceId']
@StartTime = params['StartTime']
@EndTime = params['EndTime']
@Order = params['Order']
@OrderBy = params['OrderBy']
unless params['Filter'].nil?
@Filter = AuditLogFilter.new
@Filter.deserialize(params['Filter'])
end
end
end
# CreateAuditLogFile返回参数结构体
class CreateAuditLogFileResponse < TencentCloud::Common::AbstractModel
# @param FileName: 审计日志文件名称。
# @type FileName: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :FileName, :RequestId
def initialize(filename=nil, requestid=nil)
@FileName = filename
@RequestId = requestid
end
def deserialize(params)
@FileName = params['FileName']
@RequestId = params['RequestId']
end
end
# CreateAuditRuleTemplate请求参数结构体
class CreateAuditRuleTemplateRequest < TencentCloud::Common::AbstractModel
# @param RuleFilters: 审计规则。
# @type RuleFilters: Array
# @param RuleTemplateName: 规则模版名称。
# @type RuleTemplateName: String
# @param Description: 规则模版描述。
# @type Description: String
attr_accessor :RuleFilters, :RuleTemplateName, :Description
def initialize(rulefilters=nil, ruletemplatename=nil, description=nil)
@RuleFilters = rulefilters
@RuleTemplateName = ruletemplatename
@Description = description
end
def deserialize(params)
unless params['RuleFilters'].nil?
@RuleFilters = []
params['RuleFilters'].each do |i|
rulefilters_tmp = RuleFilters.new
rulefilters_tmp.deserialize(i)
@RuleFilters << rulefilters_tmp
end
end
@RuleTemplateName = params['RuleTemplateName']
@Description = params['Description']
end
end
# CreateAuditRuleTemplate返回参数结构体
class CreateAuditRuleTemplateResponse < TencentCloud::Common::AbstractModel
# @param RuleTemplateId: 生成的规则模版ID。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RuleTemplateId: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RuleTemplateId, :RequestId
def initialize(ruletemplateid=nil, requestid=nil)
@RuleTemplateId = ruletemplateid
@RequestId = requestid
end
def deserialize(params)
@RuleTemplateId = params['RuleTemplateId']
@RequestId = params['RequestId']
end
end
# CreateBackup请求参数结构体
class CreateBackupRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param BackupType: 备份类型, 可选值：logic，逻辑备份；snapshot，物理备份
# @type BackupType: String
# @param BackupDatabases: 备份的库, 只在 BackupType 为 logic 时有效
# @type BackupDatabases: Array
# @param BackupTables: 备份的表, 只在 BackupType 为 logic 时有效
# @type BackupTables: Array
# @param BackupName: 备注名
# @type BackupName: String
attr_accessor :ClusterId, :BackupType, :BackupDatabases, :BackupTables, :BackupName
def initialize(clusterid=nil, backuptype=nil, backupdatabases=nil, backuptables=nil, backupname=nil)
@ClusterId = clusterid
@BackupType = backuptype
@BackupDatabases = backupdatabases
@BackupTables = backuptables
@BackupName = backupname
end
def deserialize(params)
@ClusterId = params['ClusterId']
@BackupType = params['BackupType']
@BackupDatabases = params['BackupDatabases']
unless params['BackupTables'].nil?
@BackupTables = []
params['BackupTables'].each do |i|
databasetables_tmp = DatabaseTables.new
databasetables_tmp.deserialize(i)
@BackupTables << databasetables_tmp
end
end
@BackupName = params['BackupName']
end
end
# CreateBackup返回参数结构体
class CreateBackupResponse < TencentCloud::Common::AbstractModel
# @param FlowId: 异步任务流ID
# @type FlowId: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :FlowId, :RequestId
def initialize(flowid=nil, requestid=nil)
@FlowId = flowid
@RequestId = requestid
end
def deserialize(params)
@FlowId = params['FlowId']
@RequestId = params['RequestId']
end
end
# CreateClusters请求参数结构体
class CreateClustersRequest < TencentCloud::Common::AbstractModel
# @param Zone: 可用区
# @type Zone: String
# @param VpcId: 所属VPC网络ID
# @type VpcId: String
# @param SubnetId: 所属子网ID
# @type SubnetId: String
# @param DbType: 数据库类型，取值范围:
# <li> MYSQL </li>
# @type DbType: String
# @param DbVersion: 数据库版本，取值范围:
# <li> MYSQL可选值：5.7，8.0 </li>
# @type DbVersion: String
# @param ProjectId: 所属项目ID
# @type ProjectId: Integer
# @param Cpu: 当DbMode为NORMAL或不填时必选
# 普通实例Cpu核数
# @type Cpu: Integer
# @param Memory: 当DbMode为NORMAL或不填时必选
# 普通实例内存,单位G
# @type Memory: Integer
# @param Storage: 该参数无实际意义，已废弃。
# 存储大小，单位G。
# @type Storage: Integer
# @param ClusterName: 集群名称，长度小于64个字符，每个字符取值范围：大/小写字母，数字，特殊符号（'-','_','.'）
# @type ClusterName: String
# @param AdminPassword: 账号密码(8-64个字符，包含大小写英文字母、数字和符号~!@#$%^&*_-+=`|\(){}[]:;'<>,.?/中的任意三种)
# @type AdminPassword: String
# @param Port: 端口，默认3306，取值范围[0, 65535)
# @type Port: Integer
# @param PayMode: 计费模式，按量计费：0，包年包月：1。默认按量计费。
# @type PayMode: Integer
# @param Count: 购买集群数，可选值范围[1,50]，默认为1
# @type Count: Integer
# @param RollbackStrategy: 回档类型：
# noneRollback：不回档；
# snapRollback，快照回档；
# timeRollback，时间点回档
# @type RollbackStrategy: String
# @param RollbackId: 快照回档，表示snapshotId；时间点回档，表示queryId，为0，表示需要判断时间点是否有效
# @type RollbackId: Integer
# @param OriginalClusterId: 回档时，传入源集群ID，用于查找源poolId
# @type OriginalClusterId: String
# @param ExpectTime: 时间点回档，指定时间；快照回档，快照时间
# @type ExpectTime: String
# @param ExpectTimeThresh: 该参数无实际意义，已废弃。
# 时间点回档，指定时间允许范围
# @type ExpectTimeThresh: Integer
# @param StorageLimit: 普通实例存储上限，单位GB
# 当DbType为MYSQL，且存储计费模式为预付费时，该参数需不大于cpu与memory对应存储规格上限
# @type StorageLimit: Integer
# @param InstanceCount: 实例数量，数量范围为(0,16]
# @type InstanceCount: Integer
# @param TimeSpan: 包年包月购买时长
# @type TimeSpan: Integer
# @param TimeUnit: 包年包月购买时长单位，['s','d','m','y']
# @type TimeUnit: String
# @param AutoRenewFlag: 包年包月购买是否自动续费，默认为0
# @type AutoRenewFlag: Integer
# @param AutoVoucher: 是否自动选择代金券 1是 0否 默认为0
# @type AutoVoucher: Integer
# @param HaCount: 实例数量（该参数已不再使用，只做存量兼容处理）
# @type HaCount: Integer
# @param OrderSource: 订单来源
# @type OrderSource: String
# @param ResourceTags: 集群创建需要绑定的tag数组信息
# @type ResourceTags: Array
# @param DbMode: Db类型
# 当DbType为MYSQL时可选(默认NORMAL)：
# <li>NORMAL</li>
# <li>SERVERLESS</li>
# @type DbMode: String
# @param MinCpu: 当DbMode为SEVERLESS时必填
# cpu最小值，可选范围参考DescribeServerlessInstanceSpecs接口返回
# @type MinCpu: Float
# @param MaxCpu: 当DbMode为SEVERLESS时必填：
# cpu最大值，可选范围参考DescribeServerlessInstanceSpecs接口返回
# @type MaxCpu: Float
# @param AutoPause: 当DbMode为SEVERLESS时，指定集群是否自动暂停，可选范围
# <li>yes</li>
# <li>no</li>
# 默认值:yes
# @type AutoPause: String
# @param AutoPauseDelay: 当DbMode为SEVERLESS时，指定集群自动暂停的延迟，单位秒，可选范围[600,691200]
# 默认值:600
# @type AutoPauseDelay: Integer
# @param StoragePayMode: 集群存储计费模式，按量计费：0，包年包月：1。默认按量计费
# 当DbType为MYSQL时，在集群计算计费模式为后付费（包括DbMode为SERVERLESS）时，存储计费模式仅可为按量计费
# 回档与克隆均不支持包年包月存储
# @type StoragePayMode: Integer
# @param SecurityGroupIds: 安全组id数组
# @type SecurityGroupIds: Array
# @param AlarmPolicyIds: 告警策略Id数组
# @type AlarmPolicyIds: Array
# @param ClusterParams: 参数数组，暂时支持character_set_server （utf8｜latin1｜gbk｜utf8mb4） ，lower_case_table_names，1-大小写不敏感，0-大小写敏感
# @type ClusterParams: Array
# @param DealMode: 交易模式，0-下单且支付，1-下单
# @type DealMode: Integer
# @param ParamTemplateId: 参数模版ID，可以通过查询参数模板信息DescribeParamTemplates获得参数模板ID
# @type ParamTemplateId: Integer
# @param SlaveZone: 多可用区地址
# @type SlaveZone: String
# @param InstanceInitInfos: 实例初始化配置信息，主要用于购买集群时选不同规格实例
# @type InstanceInitInfos: Array
attr_accessor :Zone, :VpcId, :SubnetId, :DbType, :DbVersion, :ProjectId, :Cpu, :Memory, :Storage, :ClusterName, :AdminPassword, :Port, :PayMode, :Count, :RollbackStrategy, :RollbackId, :OriginalClusterId, :ExpectTime, :ExpectTimeThresh, :StorageLimit, :InstanceCount, :TimeSpan, :TimeUnit, :AutoRenewFlag, :AutoVoucher, :HaCount, :OrderSource, :ResourceTags, :DbMode, :MinCpu, :MaxCpu, :AutoPause, :AutoPauseDelay, :StoragePayMode, :SecurityGroupIds, :AlarmPolicyIds, :ClusterParams, :DealMode, :ParamTemplateId, :SlaveZone, :InstanceInitInfos
def initialize(zone=nil, vpcid=nil, subnetid=nil, dbtype=nil, dbversion=nil, projectid=nil, cpu=nil, memory=nil, storage=nil, clustername=nil, adminpassword=nil, port=nil, paymode=nil, count=nil, rollbackstrategy=nil, rollbackid=nil, originalclusterid=nil, expecttime=nil, expecttimethresh=nil, storagelimit=nil, instancecount=nil, timespan=nil, timeunit=nil, autorenewflag=nil, autovoucher=nil, hacount=nil, ordersource=nil, resourcetags=nil, dbmode=nil, mincpu=nil, maxcpu=nil, autopause=nil, autopausedelay=nil, storagepaymode=nil, securitygroupids=nil, alarmpolicyids=nil, clusterparams=nil, dealmode=nil, paramtemplateid=nil, slavezone=nil, instanceinitinfos=nil)
@Zone = zone
@VpcId = vpcid
@SubnetId = subnetid
@DbType = dbtype
@DbVersion = dbversion
@ProjectId = projectid
@Cpu = cpu
@Memory = memory
@Storage = storage
@ClusterName = clustername
@AdminPassword = adminpassword
@Port = port
@PayMode = paymode
@Count = count
@RollbackStrategy = rollbackstrategy
@RollbackId = rollbackid
@OriginalClusterId = originalclusterid
@ExpectTime = expecttime
@ExpectTimeThresh = expecttimethresh
@StorageLimit = storagelimit
@InstanceCount = instancecount
@TimeSpan = timespan
@TimeUnit = timeunit
@AutoRenewFlag = autorenewflag
@AutoVoucher = autovoucher
@HaCount = hacount
@OrderSource = ordersource
@ResourceTags = resourcetags
@DbMode = dbmode
@MinCpu = mincpu
@MaxCpu = maxcpu
@AutoPause = autopause
@AutoPauseDelay = autopausedelay
@StoragePayMode = storagepaymode
@SecurityGroupIds = securitygroupids
@AlarmPolicyIds = alarmpolicyids
@ClusterParams = clusterparams
@DealMode = dealmode
@ParamTemplateId = paramtemplateid
@SlaveZone = slavezone
@InstanceInitInfos = instanceinitinfos
end
def deserialize(params)
@Zone = params['Zone']
@VpcId = params['VpcId']
@SubnetId = params['SubnetId']
@DbType = params['DbType']
@DbVersion = params['DbVersion']
@ProjectId = params['ProjectId']
@Cpu = params['Cpu']
@Memory = params['Memory']
@Storage = params['Storage']
@ClusterName = params['ClusterName']
@AdminPassword = params['AdminPassword']
@Port = params['Port']
@PayMode = params['PayMode']
@Count = params['Count']
@RollbackStrategy = params['RollbackStrategy']
@RollbackId = params['RollbackId']
@OriginalClusterId = params['OriginalClusterId']
@ExpectTime = params['ExpectTime']
@ExpectTimeThresh = params['ExpectTimeThresh']
@StorageLimit = params['StorageLimit']
@InstanceCount = params['InstanceCount']
@TimeSpan = params['TimeSpan']
@TimeUnit = params['TimeUnit']
@AutoRenewFlag = params['AutoRenewFlag']
@AutoVoucher = params['AutoVoucher']
@HaCount = params['HaCount']
@OrderSource = params['OrderSource']
unless params['ResourceTags'].nil?
@ResourceTags = []
params['ResourceTags'].each do |i|
tag_tmp = Tag.new
tag_tmp.deserialize(i)
@ResourceTags << tag_tmp
end
end
@DbMode = params['DbMode']
@MinCpu = params['MinCpu']
@MaxCpu = params['MaxCpu']
@AutoPause = params['AutoPause']
@AutoPauseDelay = params['AutoPauseDelay']
@StoragePayMode = params['StoragePayMode']
@SecurityGroupIds = params['SecurityGroupIds']
@AlarmPolicyIds = params['AlarmPolicyIds']
unless params['ClusterParams'].nil?
@ClusterParams = []
params['ClusterParams'].each do |i|
paramitem_tmp = ParamItem.new
paramitem_tmp.deserialize(i)
@ClusterParams << paramitem_tmp
end
end
@DealMode = params['DealMode']
@ParamTemplateId = params['ParamTemplateId']
@SlaveZone = params['SlaveZone']
unless params['InstanceInitInfos'].nil?
@InstanceInitInfos = []
params['InstanceInitInfos'].each do |i|
instanceinitinfo_tmp = InstanceInitInfo.new
instanceinitinfo_tmp.deserialize(i)
@InstanceInitInfos << instanceinitinfo_tmp
end
end
end
end
# CreateClusters返回参数结构体
class CreateClustersResponse < TencentCloud::Common::AbstractModel
# @param TranId: 冻结流水ID
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TranId: String
# @param DealNames: 订单号
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DealNames: Array
# @param ResourceIds: 资源ID列表（该字段已不再维护，请使用dealNames字段查询接口DescribeResourcesByDealName获取资源ID）
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ResourceIds: Array
# @param ClusterIds: 集群ID列表（该字段已不再维护，请使用dealNames字段查询接口DescribeResourcesByDealName获取集群ID）
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ClusterIds: Array
# @param BigDealIds: 大订单号
# 注意：此字段可能返回 null，表示取不到有效值。
# @type BigDealIds: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TranId, :DealNames, :ResourceIds, :ClusterIds, :BigDealIds, :RequestId
def initialize(tranid=nil, dealnames=nil, resourceids=nil, clusterids=nil, bigdealids=nil, requestid=nil)
@TranId = tranid
@DealNames = dealnames
@ResourceIds = resourceids
@ClusterIds = clusterids
@BigDealIds = bigdealids
@RequestId = requestid
end
def deserialize(params)
@TranId = params['TranId']
@DealNames = params['DealNames']
@ResourceIds = params['ResourceIds']
@ClusterIds = params['ClusterIds']
@BigDealIds = params['BigDealIds']
@RequestId = params['RequestId']
end
end
# 集群信息
class CynosdbCluster < TencentCloud::Common::AbstractModel
# @param Status: 集群状态， 可选值如下:
# creating: 创建中
# running:运行中
# isolating:隔离中
# isolated:已隔离
# activating:解隔离中
# offlining:下线中
# offlined:已下线
# deleting:删除中
# deleted:已删除
# @type Status: String
# @param UpdateTime: 更新时间
# @type UpdateTime: String
# @param Zone: 可用区
# @type Zone: String
# @param ClusterName: 集群名称
# @type ClusterName: String
# @param Region: 地域
# @type Region: String
# @param DbVersion: 数据库版本
# @type DbVersion: String
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param InstanceNum: 实例数
# @type InstanceNum: Integer
# @param Uin: 用户uin
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Uin: String
# @param DbType: 引擎类型
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DbType: String
# @param AppId: 用户appid
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AppId: Integer
# @param StatusDesc: 集群状态描述
# 注意：此字段可能返回 null，表示取不到有效值。
# @type StatusDesc: String
# @param CreateTime: 集群创建时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CreateTime: String
# @param PayMode: 付费模式。0-按量计费，1-包年包月
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PayMode: Integer
# @param PeriodEndTime: 截止时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PeriodEndTime: String
# @param Vip: 集群读写vip
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Vip: String
# @param Vport: 集群读写vport
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Vport: Integer
# @param ProjectID: 项目id
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ProjectID: Integer
# @param VpcId: 私有网络ID
# 注意：此字段可能返回 null，表示取不到有效值。
# @type VpcId: String
# @param SubnetId: 子网ID
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SubnetId: String
# @param CynosVersion: cynos内核版本
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CynosVersion: String
# @param StorageLimit: 存储容量
# 注意：此字段可能返回 null，表示取不到有效值。
# @type StorageLimit: Integer
# @param RenewFlag: 续费标志
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RenewFlag: Integer
# @param ProcessingTask: 正在处理的任务
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ProcessingTask: String
# @param Tasks: 集群的任务数组
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Tasks: Array
# @param ResourceTags: 集群绑定的tag数组
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ResourceTags: Array
# @param DbMode: Db类型(NORMAL, SERVERLESS)
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DbMode: String
# @param ServerlessStatus: 当Db类型为SERVERLESS时，serverless集群状态，可选值:
# resume
# pause
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ServerlessStatus: String
# @param Storage: 集群预付费存储值大小
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Storage: Integer
# @param StorageId: 集群存储为预付费时的存储ID，用于预付费存储变配
# 注意：此字段可能返回 null，表示取不到有效值。
# @type StorageId: String
# @param StoragePayMode: 集群存储付费模式。0-按量计费，1-包年包月
# 注意：此字段可能返回 null，表示取不到有效值。
# @type StoragePayMode: Integer
# @param MinStorageSize: 集群计算规格对应的最小存储值
# 注意：此字段可能返回 null，表示取不到有效值。
# @type MinStorageSize: Integer
# @param MaxStorageSize: 集群计算规格对应的最大存储值
# 注意：此字段可能返回 null，表示取不到有效值。
# @type MaxStorageSize: Integer
# @param NetAddrs: 集群网络信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type NetAddrs: Array
# @param PhysicalZone: 物理可用区
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PhysicalZone: String
# @param MasterZone: 主可用区
# 注意：此字段可能返回 null，表示取不到有效值。
# @type MasterZone: String
# @param HasSlaveZone: 是否有从可用区
# 注意：此字段可能返回 null，表示取不到有效值。
# @type HasSlaveZone: String
# @param SlaveZones: 从可用区
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SlaveZones: Array
# @param BusinessType: 商业类型
# 注意：此字段可能返回 null，表示取不到有效值。
# @type BusinessType: String
# @param IsFreeze: 是否冻结
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IsFreeze: String
# @param OrderSource: 订单来源
# 注意：此字段可能返回 null，表示取不到有效值。
# @type OrderSource: String
# @param Ability: 能力
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Ability: :class:`Tencentcloud::Cynosdb.v20190107.models.Ability`
attr_accessor :Status, :UpdateTime, :Zone, :ClusterName, :Region, :DbVersion, :ClusterId, :InstanceNum, :Uin, :DbType, :AppId, :StatusDesc, :CreateTime, :PayMode, :PeriodEndTime, :Vip, :Vport, :ProjectID, :VpcId, :SubnetId, :CynosVersion, :StorageLimit, :RenewFlag, :ProcessingTask, :Tasks, :ResourceTags, :DbMode, :ServerlessStatus, :Storage, :StorageId, :StoragePayMode, :MinStorageSize, :MaxStorageSize, :NetAddrs, :PhysicalZone, :MasterZone, :HasSlaveZone, :SlaveZones, :BusinessType, :IsFreeze, :OrderSource, :Ability
def initialize(status=nil, updatetime=nil, zone=nil, clustername=nil, region=nil, dbversion=nil, clusterid=nil, instancenum=nil, uin=nil, dbtype=nil, appid=nil, statusdesc=nil, createtime=nil, paymode=nil, periodendtime=nil, vip=nil, vport=nil, projectid=nil, vpcid=nil, subnetid=nil, cynosversion=nil, storagelimit=nil, renewflag=nil, processingtask=nil, tasks=nil, resourcetags=nil, dbmode=nil, serverlessstatus=nil, storage=nil, storageid=nil, storagepaymode=nil, minstoragesize=nil, maxstoragesize=nil, netaddrs=nil, physicalzone=nil, masterzone=nil, hasslavezone=nil, slavezones=nil, businesstype=nil, isfreeze=nil, ordersource=nil, ability=nil)
@Status = status
@UpdateTime = updatetime
@Zone = zone
@ClusterName = clustername
@Region = region
@DbVersion = dbversion
@ClusterId = clusterid
@InstanceNum = instancenum
@Uin = uin
@DbType = dbtype
@AppId = appid
@StatusDesc = statusdesc
@CreateTime = createtime
@PayMode = paymode
@PeriodEndTime = periodendtime
@Vip = vip
@Vport = vport
@ProjectID = projectid
@VpcId = vpcid
@SubnetId = subnetid
@CynosVersion = cynosversion
@StorageLimit = storagelimit
@RenewFlag = renewflag
@ProcessingTask = processingtask
@Tasks = tasks
@ResourceTags = resourcetags
@DbMode = dbmode
@ServerlessStatus = serverlessstatus
@Storage = storage
@StorageId = storageid
@StoragePayMode = storagepaymode
@MinStorageSize = minstoragesize
@MaxStorageSize = maxstoragesize
@NetAddrs = netaddrs
@PhysicalZone = physicalzone
@MasterZone = masterzone
@HasSlaveZone = hasslavezone
@SlaveZones = slavezones
@BusinessType = businesstype
@IsFreeze = isfreeze
@OrderSource = ordersource
@Ability = ability
end
def deserialize(params)
@Status = params['Status']
@UpdateTime = params['UpdateTime']
@Zone = params['Zone']
@ClusterName = params['ClusterName']
@Region = params['Region']
@DbVersion = params['DbVersion']
@ClusterId = params['ClusterId']
@InstanceNum = params['InstanceNum']
@Uin = params['Uin']
@DbType = params['DbType']
@AppId = params['AppId']
@StatusDesc = params['StatusDesc']
@CreateTime = params['CreateTime']
@PayMode = params['PayMode']
@PeriodEndTime = params['PeriodEndTime']
@Vip = params['Vip']
@Vport = params['Vport']
@ProjectID = params['ProjectID']
@VpcId = params['VpcId']
@SubnetId = params['SubnetId']
@CynosVersion = params['CynosVersion']
@StorageLimit = params['StorageLimit']
@RenewFlag = params['RenewFlag']
@ProcessingTask = params['ProcessingTask']
unless params['Tasks'].nil?
@Tasks = []
params['Tasks'].each do |i|
objecttask_tmp = ObjectTask.new
objecttask_tmp.deserialize(i)
@Tasks << objecttask_tmp
end
end
unless params['ResourceTags'].nil?
@ResourceTags = []
params['ResourceTags'].each do |i|
tag_tmp = Tag.new
tag_tmp.deserialize(i)
@ResourceTags << tag_tmp
end
end
@DbMode = params['DbMode']
@ServerlessStatus = params['ServerlessStatus']
@Storage = params['Storage']
@StorageId = params['StorageId']
@StoragePayMode = params['StoragePayMode']
@MinStorageSize = params['MinStorageSize']
@MaxStorageSize = params['MaxStorageSize']
unless params['NetAddrs'].nil?
@NetAddrs = []
params['NetAddrs'].each do |i|
netaddr_tmp = NetAddr.new
netaddr_tmp.deserialize(i)
@NetAddrs << netaddr_tmp
end
end
@PhysicalZone = params['PhysicalZone']
@MasterZone = params['MasterZone']
@HasSlaveZone = params['HasSlaveZone']
@SlaveZones = params['SlaveZones']
@BusinessType = params['BusinessType']
@IsFreeze = params['IsFreeze']
@OrderSource = params['OrderSource']
unless params['Ability'].nil?
@Ability = Ability.new
@Ability.deserialize(params['Ability'])
end
end
end
# 集群详情详细信息
class CynosdbClusterDetail < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param ClusterName: 集群名称
# @type ClusterName: String
# @param Region: 地域
# @type Region: String
# @param Status: 状态
# @type Status: String
# @param StatusDesc: 状态描述
# @type StatusDesc: String
# @param VpcName: VPC名称
# @type VpcName: String
# @param VpcId: vpc唯一id
# @type VpcId: String
# @param SubnetName: 子网名称
# @type SubnetName: String
# @param SubnetId: 子网ID
# @type SubnetId: String
# @param Charset: 字符集
# @type Charset: String
# @param CreateTime: 创建时间
# @type CreateTime: String
# @param DbType: 数据库类型
# @type DbType: String
# @param DbVersion: 数据库版本
# @type DbVersion: String
# @param UsedStorage: 使用容量
# @type UsedStorage: Integer
# @param RoAddr: 读写分离Vport
# @type RoAddr: Array
# @param InstanceSet: 实例信息
# @type InstanceSet: Array
# @param PayMode: 付费模式
# @type PayMode: Integer
# @param PeriodEndTime: 到期时间
# @type PeriodEndTime: String
# @param Vip: vip地址
# @type Vip: String
# @param Vport: vport端口
# @type Vport: Integer
# @param ProjectID: 项目id
# @type ProjectID: Integer
# @param Zone: 可用区
# @type Zone: String
# @param ResourceTags: 实例绑定的tag数组信息
# @type ResourceTags: Array
# @param ServerlessStatus: 当Db类型为SERVERLESS时，serverless集群状态，可选值:
# resume
# resuming
# pause
# pausing
# @type ServerlessStatus: String
# @param LogBin: binlog开关，可选值：ON, OFF
# 注意：此字段可能返回 null，表示取不到有效值。
# @type LogBin: String
# @param PitrType: pitr类型，可选值：normal, redo_pitr
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PitrType: String
# @param PhysicalZone: 物理可用区
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PhysicalZone: String
# @param StorageId: 存储Id
# 注意：此字段可能返回 null，表示取不到有效值。
# @type StorageId: String
# @param Storage: 存储大小，单位为G
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Storage: Integer
# @param MaxStorageSize: 最大存储规格，单位为G
# 注意：此字段可能返回 null，表示取不到有效值。
# @type MaxStorageSize: Integer
# @param MinStorageSize: 最小存储规格，单位为G
# 注意：此字段可能返回 null，表示取不到有效值。
# @type MinStorageSize: Integer
# @param StoragePayMode: 存储付费类型，1为包年包月，0为按量计费
# 注意：此字段可能返回 null，表示取不到有效值。
# @type StoragePayMode: Integer
# @param DbMode: 数据库类型，normal，serverless
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DbMode: String
# @param StorageLimit: 存储空间上限
# 注意：此字段可能返回 null，表示取不到有效值。
# @type StorageLimit: Integer
# @param Ability: 集群支持的功能
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Ability: :class:`Tencentcloud::Cynosdb.v20190107.models.Ability`
# @param CynosVersion: cynos版本
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CynosVersion: String
# @param BusinessType: 商业类型
# 注意：此字段可能返回 null，表示取不到有效值。
# @type BusinessType: String
# @param HasSlaveZone: 是否有从可用区
# 注意：此字段可能返回 null，表示取不到有效值。
# @type HasSlaveZone: String
# @param IsFreeze: 是否冻结
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IsFreeze: String
# @param Tasks: 任务列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Tasks: Array
# @param MasterZone: 主可用区
# 注意：此字段可能返回 null，表示取不到有效值。
# @type MasterZone: String
# @param SlaveZones: 从可用区列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SlaveZones: Array
# @param ProxyStatus: Proxy状态
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ProxyStatus: String
# @param IsSkipTrade: 是否跳过交易
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IsSkipTrade: String
# @param IsOpenPasswordComplexity: 是否打开密码复杂度
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IsOpenPasswordComplexity: String
# @param NetworkStatus: 网络类型
# 注意：此字段可能返回 null，表示取不到有效值。
# @type NetworkStatus: String
attr_accessor :ClusterId, :ClusterName, :Region, :Status, :StatusDesc, :VpcName, :VpcId, :SubnetName, :SubnetId, :Charset, :CreateTime, :DbType, :DbVersion, :UsedStorage, :RoAddr, :InstanceSet, :PayMode, :PeriodEndTime, :Vip, :Vport, :ProjectID, :Zone, :ResourceTags, :ServerlessStatus, :LogBin, :PitrType, :PhysicalZone, :StorageId, :Storage, :MaxStorageSize, :MinStorageSize, :StoragePayMode, :DbMode, :StorageLimit, :Ability, :CynosVersion, :BusinessType, :HasSlaveZone, :IsFreeze, :Tasks, :MasterZone, :SlaveZones, :ProxyStatus, :IsSkipTrade, :IsOpenPasswordComplexity, :NetworkStatus
def initialize(clusterid=nil, clustername=nil, region=nil, status=nil, statusdesc=nil, vpcname=nil, vpcid=nil, subnetname=nil, subnetid=nil, charset=nil, createtime=nil, dbtype=nil, dbversion=nil, usedstorage=nil, roaddr=nil, instanceset=nil, paymode=nil, periodendtime=nil, vip=nil, vport=nil, projectid=nil, zone=nil, resourcetags=nil, serverlessstatus=nil, logbin=nil, pitrtype=nil, physicalzone=nil, storageid=nil, storage=nil, maxstoragesize=nil, minstoragesize=nil, storagepaymode=nil, dbmode=nil, storagelimit=nil, ability=nil, cynosversion=nil, businesstype=nil, hasslavezone=nil, isfreeze=nil, tasks=nil, masterzone=nil, slavezones=nil, proxystatus=nil, isskiptrade=nil, isopenpasswordcomplexity=nil, networkstatus=nil)
@ClusterId = clusterid
@ClusterName = clustername
@Region = region
@Status = status
@StatusDesc = statusdesc
@VpcName = vpcname
@VpcId = vpcid
@SubnetName = subnetname
@SubnetId = subnetid
@Charset = charset
@CreateTime = createtime
@DbType = dbtype
@DbVersion = dbversion
@UsedStorage = usedstorage
@RoAddr = roaddr
@InstanceSet = instanceset
@PayMode = paymode
@PeriodEndTime = periodendtime
@Vip = vip
@Vport = vport
@ProjectID = projectid
@Zone = zone
@ResourceTags = resourcetags
@ServerlessStatus = serverlessstatus
@LogBin = logbin
@PitrType = pitrtype
@PhysicalZone = physicalzone
@StorageId = storageid
@Storage = storage
@MaxStorageSize = maxstoragesize
@MinStorageSize = minstoragesize
@StoragePayMode = storagepaymode
@DbMode = dbmode
@StorageLimit = storagelimit
@Ability = ability
@CynosVersion = cynosversion
@BusinessType = businesstype
@HasSlaveZone = hasslavezone
@IsFreeze = isfreeze
@Tasks = tasks
@MasterZone = masterzone
@SlaveZones = slavezones
@ProxyStatus = proxystatus
@IsSkipTrade = isskiptrade
@IsOpenPasswordComplexity = isopenpasswordcomplexity
@NetworkStatus = networkstatus
end
def deserialize(params)
@ClusterId = params['ClusterId']
@ClusterName = params['ClusterName']
@Region = params['Region']
@Status = params['Status']
@StatusDesc = params['StatusDesc']
@VpcName = params['VpcName']
@VpcId = params['VpcId']
@SubnetName = params['SubnetName']
@SubnetId = params['SubnetId']
@Charset = params['Charset']
@CreateTime = params['CreateTime']
@DbType = params['DbType']
@DbVersion = params['DbVersion']
@UsedStorage = params['UsedStorage']
unless params['RoAddr'].nil?
@RoAddr = []
params['RoAddr'].each do |i|
addr_tmp = Addr.new
addr_tmp.deserialize(i)
@RoAddr << addr_tmp
end
end
unless params['InstanceSet'].nil?
@InstanceSet = []
params['InstanceSet'].each do |i|
clusterinstancedetail_tmp = ClusterInstanceDetail.new
clusterinstancedetail_tmp.deserialize(i)
@InstanceSet << clusterinstancedetail_tmp
end
end
@PayMode = params['PayMode']
@PeriodEndTime = params['PeriodEndTime']
@Vip = params['Vip']
@Vport = params['Vport']
@ProjectID = params['ProjectID']
@Zone = params['Zone']
unless params['ResourceTags'].nil?
@ResourceTags = []
params['ResourceTags'].each do |i|
tag_tmp = Tag.new
tag_tmp.deserialize(i)
@ResourceTags << tag_tmp
end
end
@ServerlessStatus = params['ServerlessStatus']
@LogBin = params['LogBin']
@PitrType = params['PitrType']
@PhysicalZone = params['PhysicalZone']
@StorageId = params['StorageId']
@Storage = params['Storage']
@MaxStorageSize = params['MaxStorageSize']
@MinStorageSize = params['MinStorageSize']
@StoragePayMode = params['StoragePayMode']
@DbMode = params['DbMode']
@StorageLimit = params['StorageLimit']
unless params['Ability'].nil?
@Ability = Ability.new
@Ability.deserialize(params['Ability'])
end
@CynosVersion = params['CynosVersion']
@BusinessType = params['BusinessType']
@HasSlaveZone = params['HasSlaveZone']
@IsFreeze = params['IsFreeze']
unless params['Tasks'].nil?
@Tasks = []
params['Tasks'].each do |i|
objecttask_tmp = ObjectTask.new
objecttask_tmp.deserialize(i)
@Tasks << objecttask_tmp
end
end
@MasterZone = params['MasterZone']
@SlaveZones = params['SlaveZones']
@ProxyStatus = params['ProxyStatus']
@IsSkipTrade = params['IsSkipTrade']
@IsOpenPasswordComplexity = params['IsOpenPasswordComplexity']
@NetworkStatus = params['NetworkStatus']
end
end
# 实例信息
class CynosdbInstance < TencentCloud::Common::AbstractModel
# @param Uin: 用户Uin
# @type Uin: String
# @param AppId: 用户AppId
# @type AppId: Integer
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param ClusterName: 集群名称
# @type ClusterName: String
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param InstanceName: 实例名称
# @type InstanceName: String
# @param ProjectId: 项目ID
# @type ProjectId: Integer
# @param Region: 地域
# @type Region: String
# @param Zone: 可用区
# @type Zone: String
# @param Status: 实例状态
# @type Status: String
# @param StatusDesc: 实例状态中文描述
# @type StatusDesc: String
# @param DbType: 数据库类型
# @type DbType: String
# @param DbVersion: 数据库版本
# @type DbVersion: String
# @param Cpu: Cpu，单位：核
# @type Cpu: Integer
# @param Memory: 内存，单位：GB
# @type Memory: Integer
# @param Storage: 存储量，单位：GB
# @type Storage: Integer
# @param InstanceType: 实例类型
# @type InstanceType: String
# @param InstanceRole: 实例当前角色
# @type InstanceRole: String
# @param UpdateTime: 更新时间
# @type UpdateTime: String
# @param CreateTime: 创建时间
# @type CreateTime: String
# @param VpcId: VPC网络ID
# @type VpcId: String
# @param SubnetId: 子网ID
# @type SubnetId: String
# @param Vip: 实例内网IP
# @type Vip: String
# @param Vport: 实例内网端口
# @type Vport: Integer
# @param PayMode: 付费模式
# @type PayMode: Integer
# @param PeriodEndTime: 实例过期时间
# @type PeriodEndTime: String
# @param DestroyDeadlineText: 销毁期限
# @type DestroyDeadlineText: String
# @param IsolateTime: 隔离时间
# @type IsolateTime: String
# @param NetType: 网络类型
# @type NetType: Integer
# @param WanDomain: 外网域名
# @type WanDomain: String
# @param WanIP: 外网IP
# @type WanIP: String
# @param WanPort: 外网端口
# @type WanPort: Integer
# @param WanStatus: 外网状态
# @type WanStatus: String
# @param DestroyTime: 实例销毁时间
# @type DestroyTime: String
# @param CynosVersion: Cynos内核版本
# @type CynosVersion: String
# @param ProcessingTask: 正在处理的任务
# @type ProcessingTask: String
# @param RenewFlag: 续费标志
# @type RenewFlag: Integer
# @param MinCpu: serverless实例cpu下限
# @type MinCpu: Float
# @param MaxCpu: serverless实例cpu上限
# @type MaxCpu: Float
# @param ServerlessStatus: serverless实例状态, 可选值：
# resume
# pause
# @type ServerlessStatus: String
# @param StorageId: 预付费存储Id
# 注意：此字段可能返回 null，表示取不到有效值。
# @type StorageId: String
# @param StoragePayMode: 存储付费类型
# @type StoragePayMode: Integer
# @param PhysicalZone: 物理区
# @type PhysicalZone: String
# @param BusinessType: 商业类型
# 注意：此字段可能返回 null，表示取不到有效值。
# @type BusinessType: String
# @param Tasks: 任务
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Tasks: Array
# @param IsFreeze: 是否冻结
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IsFreeze: String
# @param ResourceTags: 资源标签
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ResourceTags: Array
# @param MasterZone: 主可用区
# 注意：此字段可能返回 null，表示取不到有效值。
# @type MasterZone: String
# @param SlaveZones: 备可用区
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SlaveZones: Array
attr_accessor :Uin, :AppId, :ClusterId, :ClusterName, :InstanceId, :InstanceName, :ProjectId, :Region, :Zone, :Status, :StatusDesc, :DbType, :DbVersion, :Cpu, :Memory, :Storage, :InstanceType, :InstanceRole, :UpdateTime, :CreateTime, :VpcId, :SubnetId, :Vip, :Vport, :PayMode, :PeriodEndTime, :DestroyDeadlineText, :IsolateTime, :NetType, :WanDomain, :WanIP, :WanPort, :WanStatus, :DestroyTime, :CynosVersion, :ProcessingTask, :RenewFlag, :MinCpu, :MaxCpu, :ServerlessStatus, :StorageId, :StoragePayMode, :PhysicalZone, :BusinessType, :Tasks, :IsFreeze, :ResourceTags, :MasterZone, :SlaveZones
def initialize(uin=nil, appid=nil, clusterid=nil, clustername=nil, instanceid=nil, instancename=nil, projectid=nil, region=nil, zone=nil, status=nil, statusdesc=nil, dbtype=nil, dbversion=nil, cpu=nil, memory=nil, storage=nil, instancetype=nil, instancerole=nil, updatetime=nil, createtime=nil, vpcid=nil, subnetid=nil, vip=nil, vport=nil, paymode=nil, periodendtime=nil, destroydeadlinetext=nil, isolatetime=nil, nettype=nil, wandomain=nil, wanip=nil, wanport=nil, wanstatus=nil, destroytime=nil, cynosversion=nil, processingtask=nil, renewflag=nil, mincpu=nil, maxcpu=nil, serverlessstatus=nil, storageid=nil, storagepaymode=nil, physicalzone=nil, businesstype=nil, tasks=nil, isfreeze=nil, resourcetags=nil, masterzone=nil, slavezones=nil)
@Uin = uin
@AppId = appid
@ClusterId = clusterid
@ClusterName = clustername
@InstanceId = instanceid
@InstanceName = instancename
@ProjectId = projectid
@Region = region
@Zone = zone
@Status = status
@StatusDesc = statusdesc
@DbType = dbtype
@DbVersion = dbversion
@Cpu = cpu
@Memory = memory
@Storage = storage
@InstanceType = instancetype
@InstanceRole = instancerole
@UpdateTime = updatetime
@CreateTime = createtime
@VpcId = vpcid
@SubnetId = subnetid
@Vip = vip
@Vport = vport
@PayMode = paymode
@PeriodEndTime = periodendtime
@DestroyDeadlineText = destroydeadlinetext
@IsolateTime = isolatetime
@NetType = nettype
@WanDomain = wandomain
@WanIP = wanip
@WanPort = wanport
@WanStatus = wanstatus
@DestroyTime = destroytime
@CynosVersion = cynosversion
@ProcessingTask = processingtask
@RenewFlag = renewflag
@MinCpu = mincpu
@MaxCpu = maxcpu
@ServerlessStatus = serverlessstatus
@StorageId = storageid
@StoragePayMode = storagepaymode
@PhysicalZone = physicalzone
@BusinessType = businesstype
@Tasks = tasks
@IsFreeze = isfreeze
@ResourceTags = resourcetags
@MasterZone = masterzone
@SlaveZones = slavezones
end
def deserialize(params)
@Uin = params['Uin']
@AppId = params['AppId']
@ClusterId = params['ClusterId']
@ClusterName = params['ClusterName']
@InstanceId = params['InstanceId']
@InstanceName = params['InstanceName']
@ProjectId = params['ProjectId']
@Region = params['Region']
@Zone = params['Zone']
@Status = params['Status']
@StatusDesc = params['StatusDesc']
@DbType = params['DbType']
@DbVersion = params['DbVersion']
@Cpu = params['Cpu']
@Memory = params['Memory']
@Storage = params['Storage']
@InstanceType = params['InstanceType']
@InstanceRole = params['InstanceRole']
@UpdateTime = params['UpdateTime']
@CreateTime = params['CreateTime']
@VpcId = params['VpcId']
@SubnetId = params['SubnetId']
@Vip = params['Vip']
@Vport = params['Vport']
@PayMode = params['PayMode']
@PeriodEndTime = params['PeriodEndTime']
@DestroyDeadlineText = params['DestroyDeadlineText']
@IsolateTime = params['IsolateTime']
@NetType = params['NetType']
@WanDomain = params['WanDomain']
@WanIP = params['WanIP']
@WanPort = params['WanPort']
@WanStatus = params['WanStatus']
@DestroyTime = params['DestroyTime']
@CynosVersion = params['CynosVersion']
@ProcessingTask = params['ProcessingTask']
@RenewFlag = params['RenewFlag']
@MinCpu = params['MinCpu']
@MaxCpu = params['MaxCpu']
@ServerlessStatus = params['ServerlessStatus']
@StorageId = params['StorageId']
@StoragePayMode = params['StoragePayMode']
@PhysicalZone = params['PhysicalZone']
@BusinessType = params['BusinessType']
unless params['Tasks'].nil?
@Tasks = []
params['Tasks'].each do |i|
objecttask_tmp = ObjectTask.new
objecttask_tmp.deserialize(i)
@Tasks << objecttask_tmp
end
end
@IsFreeze = params['IsFreeze']
unless params['ResourceTags'].nil?
@ResourceTags = []
params['ResourceTags'].each do |i|
tag_tmp = Tag.new
tag_tmp.deserialize(i)
@ResourceTags << tag_tmp
end
end
@MasterZone = params['MasterZone']
@SlaveZones = params['SlaveZones']
end
end
# 实例详情
class CynosdbInstanceDetail < TencentCloud::Common::AbstractModel
# @param Uin: 用户Uin
# @type Uin: String
# @param AppId: 用户AppId
# @type AppId: Integer
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param ClusterName: 集群名称
# @type ClusterName: String
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param InstanceName: 实例名称
# @type InstanceName: String
# @param ProjectId: 项目ID
# @type ProjectId: Integer
# @param Region: 地域
# @type Region: String
# @param Zone: 可用区
# @type Zone: String
# @param Status: 实例状态
# @type Status: String
# @param StatusDesc: 实例状态中文描述
# @type StatusDesc: String
# @param DbType: 数据库类型
# @type DbType: String
# @param DbVersion: 数据库版本
# @type DbVersion: String
# @param Cpu: Cpu，单位：核
# @type Cpu: Integer
# @param Memory: 内存，单位：GB
# @type Memory: Integer
# @param Storage: 存储量，单位：GB
# @type Storage: Integer
# @param InstanceType: 实例类型
# @type InstanceType: String
# @param InstanceRole: 实例当前角色
# @type InstanceRole: String
# @param UpdateTime: 更新时间
# @type UpdateTime: String
# @param CreateTime: 创建时间
# @type CreateTime: String
# @param PayMode: 付费模式
# @type PayMode: Integer
# @param PeriodEndTime: 实例过期时间
# @type PeriodEndTime: String
# @param NetType: 网络类型
# @type NetType: Integer
# @param VpcId: VPC网络ID
# @type VpcId: String
# @param SubnetId: 子网ID
# @type SubnetId: String
# @param Vip: 实例内网IP
# @type Vip: String
# @param Vport: 实例内网端口
# @type Vport: Integer
# @param WanDomain: 实例外网域名
# @type WanDomain: String
# @param Charset: 字符集
# @type Charset: String
# @param CynosVersion: Cynos内核版本
# @type CynosVersion: String
# @param RenewFlag: 续费标志
# @type RenewFlag: Integer
# @param MinCpu: serverless实例cpu下限
# @type MinCpu: Float
# @param MaxCpu: serverless实例cpu上限
# @type MaxCpu: Float
# @param ServerlessStatus: serverless实例状态, 可能值：
# resume
# pause
# @type ServerlessStatus: String
attr_accessor :Uin, :AppId, :ClusterId, :ClusterName, :InstanceId, :InstanceName, :ProjectId, :Region, :Zone, :Status, :StatusDesc, :DbType, :DbVersion, :Cpu, :Memory, :Storage, :InstanceType, :InstanceRole, :UpdateTime, :CreateTime, :PayMode, :PeriodEndTime, :NetType, :VpcId, :SubnetId, :Vip, :Vport, :WanDomain, :Charset, :CynosVersion, :RenewFlag, :MinCpu, :MaxCpu, :ServerlessStatus
def initialize(uin=nil, appid=nil, clusterid=nil, clustername=nil, instanceid=nil, instancename=nil, projectid=nil, region=nil, zone=nil, status=nil, statusdesc=nil, dbtype=nil, dbversion=nil, cpu=nil, memory=nil, storage=nil, instancetype=nil, instancerole=nil, updatetime=nil, createtime=nil, paymode=nil, periodendtime=nil, nettype=nil, vpcid=nil, subnetid=nil, vip=nil, vport=nil, wandomain=nil, charset=nil, cynosversion=nil, renewflag=nil, mincpu=nil, maxcpu=nil, serverlessstatus=nil)
@Uin = uin
@AppId = appid
@ClusterId = clusterid
@ClusterName = clustername
@InstanceId = instanceid
@InstanceName = instancename
@ProjectId = projectid
@Region = region
@Zone = zone
@Status = status
@StatusDesc = statusdesc
@DbType = dbtype
@DbVersion = dbversion
@Cpu = cpu
@Memory = memory
@Storage = storage
@InstanceType = instancetype
@InstanceRole = instancerole
@UpdateTime = updatetime
@CreateTime = createtime
@PayMode = paymode
@PeriodEndTime = periodendtime
@NetType = nettype
@VpcId = vpcid
@SubnetId = subnetid
@Vip = vip
@Vport = vport
@WanDomain = wandomain
@Charset = charset
@CynosVersion = cynosversion
@RenewFlag = renewflag
@MinCpu = mincpu
@MaxCpu = maxcpu
@ServerlessStatus = serverlessstatus
end
def deserialize(params)
@Uin = params['Uin']
@AppId = params['AppId']
@ClusterId = params['ClusterId']
@ClusterName = params['ClusterName']
@InstanceId = params['InstanceId']
@InstanceName = params['InstanceName']
@ProjectId = params['ProjectId']
@Region = params['Region']
@Zone = params['Zone']
@Status = params['Status']
@StatusDesc = params['StatusDesc']
@DbType = params['DbType']
@DbVersion = params['DbVersion']
@Cpu = params['Cpu']
@Memory = params['Memory']
@Storage = params['Storage']
@InstanceType = params['InstanceType']
@InstanceRole = params['InstanceRole']
@UpdateTime = params['UpdateTime']
@CreateTime = params['CreateTime']
@PayMode = params['PayMode']
@PeriodEndTime = params['PeriodEndTime']
@NetType = params['NetType']
@VpcId = params['VpcId']
@SubnetId = params['SubnetId']
@Vip = params['Vip']
@Vport = params['Vport']
@WanDomain = params['WanDomain']
@Charset = params['Charset']
@CynosVersion = params['CynosVersion']
@RenewFlag = params['RenewFlag']
@MinCpu = params['MinCpu']
@MaxCpu = params['MaxCpu']
@ServerlessStatus = params['ServerlessStatus']
end
end
# 实例组信息
class CynosdbInstanceGrp < TencentCloud::Common::AbstractModel
# @param AppId: 用户appId
# @type AppId: Integer
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param CreatedTime: 创建时间
# @type CreatedTime: String
# @param DeletedTime: 删除时间
# @type DeletedTime: String
# @param InstanceGrpId: 实例组ID
# @type InstanceGrpId: String
# @param Status: 状态
# @type Status: String
# @param Type: 实例组类型。ha-ha组；ro-只读组
# @type Type: String
# @param UpdatedTime: 更新时间
# @type UpdatedTime: String
# @param Vip: 内网IP
# @type Vip: String
# @param Vport: 内网端口
# @type Vport: Integer
# @param WanDomain: 外网域名
# @type WanDomain: String
# @param WanIP: 外网ip
# @type WanIP: String
# @param WanPort: 外网端口
# @type WanPort: Integer
# @param WanStatus: 外网状态
# @type WanStatus: String
# @param InstanceSet: 实例组包含实例信息
# @type InstanceSet: Array
# @param UniqVpcId: VPC的ID
# 注意：此字段可能返回 null，表示取不到有效值。
# @type UniqVpcId: String
# @param UniqSubnetId: 子网ID
# 注意：此字段可能返回 null，表示取不到有效值。
# @type UniqSubnetId: String
# @param OldAddrInfo: 正在回收IP信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type OldAddrInfo: :class:`Tencentcloud::Cynosdb.v20190107.models.OldAddrInfo`
# @param ProcessingTasks: 正在进行的任务
# @type ProcessingTasks: Array
# @param Tasks: 任务列表
# @type Tasks: Array
# @param NetServiceId: biz_net_service表id
# @type NetServiceId: Integer
attr_accessor :AppId, :ClusterId, :CreatedTime, :DeletedTime, :InstanceGrpId, :Status, :Type, :UpdatedTime, :Vip, :Vport, :WanDomain, :WanIP, :WanPort, :WanStatus, :InstanceSet, :UniqVpcId, :UniqSubnetId, :OldAddrInfo, :ProcessingTasks, :Tasks, :NetServiceId
def initialize(appid=nil, clusterid=nil, createdtime=nil, deletedtime=nil, instancegrpid=nil, status=nil, type=nil, updatedtime=nil, vip=nil, vport=nil, wandomain=nil, wanip=nil, wanport=nil, wanstatus=nil, instanceset=nil, uniqvpcid=nil, uniqsubnetid=nil, oldaddrinfo=nil, processingtasks=nil, tasks=nil, netserviceid=nil)
@AppId = appid
@ClusterId = clusterid
@CreatedTime = createdtime
@DeletedTime = deletedtime
@InstanceGrpId = instancegrpid
@Status = status
@Type = type
@UpdatedTime = updatedtime
@Vip = vip
@Vport = vport
@WanDomain = wandomain
@WanIP = wanip
@WanPort = wanport
@WanStatus = wanstatus
@InstanceSet = instanceset
@UniqVpcId = uniqvpcid
@UniqSubnetId = uniqsubnetid
@OldAddrInfo = oldaddrinfo
@ProcessingTasks = processingtasks
@Tasks = tasks
@NetServiceId = netserviceid
end
def deserialize(params)
@AppId = params['AppId']
@ClusterId = params['ClusterId']
@CreatedTime = params['CreatedTime']
@DeletedTime = params['DeletedTime']
@InstanceGrpId = params['InstanceGrpId']
@Status = params['Status']
@Type = params['Type']
@UpdatedTime = params['UpdatedTime']
@Vip = params['Vip']
@Vport = params['Vport']
@WanDomain = params['WanDomain']
@WanIP = params['WanIP']
@WanPort = params['WanPort']
@WanStatus = params['WanStatus']
unless params['InstanceSet'].nil?
@InstanceSet = []
params['InstanceSet'].each do |i|
cynosdbinstance_tmp = CynosdbInstance.new
cynosdbinstance_tmp.deserialize(i)
@InstanceSet << cynosdbinstance_tmp
end
end
@UniqVpcId = params['UniqVpcId']
@UniqSubnetId = params['UniqSubnetId']
unless params['OldAddrInfo'].nil?
@OldAddrInfo = OldAddrInfo.new
@OldAddrInfo.deserialize(params['OldAddrInfo'])
end
@ProcessingTasks = params['ProcessingTasks']
unless params['Tasks'].nil?
@Tasks = []
params['Tasks'].each do |i|
objecttask_tmp = ObjectTask.new
objecttask_tmp.deserialize(i)
@Tasks << objecttask_tmp
end
end
@NetServiceId = params['NetServiceId']
end
end
# 数据库权限列表
class DatabasePrivileges < TencentCloud::Common::AbstractModel
# @param Db: 数据库
# @type Db: String
# @param Privileges: 权限列表
# @type Privileges: Array
attr_accessor :Db, :Privileges
def initialize(db=nil, privileges=nil)
@Db = db
@Privileges = privileges
end
def deserialize(params)
@Db = params['Db']
@Privileges = params['Privileges']
end
end
# 数据库表信息
class DatabaseTables < TencentCloud::Common::AbstractModel
# @param Database: 数据库名
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Database: String
# @param Tables: 表名称列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Tables: Array
attr_accessor :Database, :Tables
def initialize(database=nil, tables=nil)
@Database = database
@Tables = tables
end
def deserialize(params)
@Database = params['Database']
@Tables = params['Tables']
end
end
# 数据库表
class DbTable < TencentCloud::Common::AbstractModel
# @param Db: 数据库名称
# @type Db: String
# @param TableName: 数据库表名称
# @type TableName: String
attr_accessor :Db, :TableName
def initialize(db=nil, tablename=nil)
@Db = db
@TableName = tablename
end
def deserialize(params)
@Db = params['Db']
@TableName = params['TableName']
end
end
# DeleteAuditLogFile请求参数结构体
class DeleteAuditLogFileRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param FileName: 审计日志文件名称。
# @type FileName: String
attr_accessor :InstanceId, :FileName
def initialize(instanceid=nil, filename=nil)
@InstanceId = instanceid
@FileName = filename
end
def deserialize(params)
@InstanceId = params['InstanceId']
@FileName = params['FileName']
end
end
# DeleteAuditLogFile返回参数结构体
class DeleteAuditLogFileResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteAuditRuleTemplates请求参数结构体
class DeleteAuditRuleTemplatesRequest < TencentCloud::Common::AbstractModel
# @param RuleTemplateIds: 审计规则模版ID。
# @type RuleTemplateIds: Array
attr_accessor :RuleTemplateIds
def initialize(ruletemplateids=nil)
@RuleTemplateIds = ruletemplateids
end
def deserialize(params)
@RuleTemplateIds = params['RuleTemplateIds']
end
end
# DeleteAuditRuleTemplates返回参数结构体
class DeleteAuditRuleTemplatesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteBackup请求参数结构体
class DeleteBackupRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param SnapshotIdList: 备份文件ID，旧版本使用的字段，不推荐使用
# @type SnapshotIdList: Array
# @param BackupIds: 备份文件ID，推荐使用
# @type BackupIds: Array
attr_accessor :ClusterId, :SnapshotIdList, :BackupIds
def initialize(clusterid=nil, snapshotidlist=nil, backupids=nil)
@ClusterId = clusterid
@SnapshotIdList = snapshotidlist
@BackupIds = backupids
end
def deserialize(params)
@ClusterId = params['ClusterId']
@SnapshotIdList = params['SnapshotIdList']
@BackupIds = params['BackupIds']
end
end
# DeleteBackup返回参数结构体
class DeleteBackupResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DescribeAccountAllGrantPrivileges请求参数结构体
class DescribeAccountAllGrantPrivilegesRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群id
# @type ClusterId: String
# @param Account: 账号信息
# @type Account: :class:`Tencentcloud::Cynosdb.v20190107.models.InputAccount`
attr_accessor :ClusterId, :Account
def initialize(clusterid=nil, account=nil)
@ClusterId = clusterid
@Account = account
end
def deserialize(params)
@ClusterId = params['ClusterId']
unless params['Account'].nil?
@Account = InputAccount.new
@Account.deserialize(params['Account'])
end
end
end
# DescribeAccountAllGrantPrivileges返回参数结构体
class DescribeAccountAllGrantPrivilegesResponse < TencentCloud::Common::AbstractModel
# @param PrivilegeStatements: 权限语句
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PrivilegeStatements: Array
# @param GlobalPrivileges: 全局权限
# 注意：此字段可能返回 null，表示取不到有效值。
# @type GlobalPrivileges: Array
# @param DatabasePrivileges: 数据库权限
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DatabasePrivileges: Array
# @param TablePrivileges: 数据库表权限
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TablePrivileges: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :PrivilegeStatements, :GlobalPrivileges, :DatabasePrivileges, :TablePrivileges, :RequestId
def initialize(privilegestatements=nil, globalprivileges=nil, databaseprivileges=nil, tableprivileges=nil, requestid=nil)
@PrivilegeStatements = privilegestatements
@GlobalPrivileges = globalprivileges
@DatabasePrivileges = databaseprivileges
@TablePrivileges = tableprivileges
@RequestId = requestid
end
def deserialize(params)
@PrivilegeStatements = params['PrivilegeStatements']
@GlobalPrivileges = params['GlobalPrivileges']
unless params['DatabasePrivileges'].nil?
@DatabasePrivileges = []
params['DatabasePrivileges'].each do |i|
databaseprivileges_tmp = DatabasePrivileges.new
databaseprivileges_tmp.deserialize(i)
@DatabasePrivileges << databaseprivileges_tmp
end
end
unless params['TablePrivileges'].nil?
@TablePrivileges = []
params['TablePrivileges'].each do |i|
tableprivileges_tmp = TablePrivileges.new
tableprivileges_tmp.deserialize(i)
@TablePrivileges << tableprivileges_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeAccounts请求参数结构体
class DescribeAccountsRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param AccountNames: 需要过滤的账户列表
# @type AccountNames: Array
# @param DbType: 数据库类型，取值范围:
# <li> MYSQL </li>
# 该参数已废用
# @type DbType: String
# @param Hosts: 需要过滤的账户列表
# @type Hosts: Array
# @param Limit: 限制量
# @type Limit: Integer
# @param Offset: 偏移量
# @type Offset: Integer
attr_accessor :ClusterId, :AccountNames, :DbType, :Hosts, :Limit, :Offset
def initialize(clusterid=nil, accountnames=nil, dbtype=nil, hosts=nil, limit=nil, offset=nil)
@ClusterId = clusterid
@AccountNames = accountnames
@DbType = dbtype
@Hosts = hosts
@Limit = limit
@Offset = offset
end
def deserialize(params)
@ClusterId = params['ClusterId']
@AccountNames = params['AccountNames']
@DbType = params['DbType']
@Hosts = params['Hosts']
@Limit = params['Limit']
@Offset = params['Offset']
end
end
# DescribeAccounts返回参数结构体
class DescribeAccountsResponse < TencentCloud::Common::AbstractModel
# @param AccountSet: 数据库账号列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AccountSet: Array
# @param TotalCount: 账号总数量
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :AccountSet, :TotalCount, :RequestId
def initialize(accountset=nil, totalcount=nil, requestid=nil)
@AccountSet = accountset
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['AccountSet'].nil?
@AccountSet = []
params['AccountSet'].each do |i|
account_tmp = Account.new
account_tmp.deserialize(i)
@AccountSet << account_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeAuditLogFiles请求参数结构体
class DescribeAuditLogFilesRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param Limit: 分页大小参数。默认值为 20，最小值为 1，最大值为 100。
# @type Limit: Integer
# @param Offset: 分页偏移量。
# @type Offset: Integer
# @param FileName: 审计日志文件名。
# @type FileName: String
attr_accessor :InstanceId, :Limit, :Offset, :FileName
def initialize(instanceid=nil, limit=nil, offset=nil, filename=nil)
@InstanceId = instanceid
@Limit = limit
@Offset = offset
@FileName = filename
end
def deserialize(params)
@InstanceId = params['InstanceId']
@Limit = params['Limit']
@Offset = params['Offset']
@FileName = params['FileName']
end
end
# DescribeAuditLogFiles返回参数结构体
class DescribeAuditLogFilesResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 符合条件的审计日志文件个数。
# @type TotalCount: Integer
# @param Items: 审计日志文件详情。
# @type Items: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :Items, :RequestId
def initialize(totalcount=nil, items=nil, requestid=nil)
@TotalCount = totalcount
@Items = items
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['Items'].nil?
@Items = []
params['Items'].each do |i|
auditlogfile_tmp = AuditLogFile.new
auditlogfile_tmp.deserialize(i)
@Items << auditlogfile_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeAuditLogs请求参数结构体
class DescribeAuditLogsRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param StartTime: 开始时间，格式为："2017-07-12 10:29:20"。
# @type StartTime: String
# @param EndTime: 结束时间，格式为："2017-07-12 10:29:20"。
# @type EndTime: String
# @param Order: 排序方式。支持值包括："ASC" - 升序，"DESC" - 降序。
# @type Order: String
# @param OrderBy: 排序字段。支持值包括：
# "timestamp" - 时间戳；
# "affectRows" - 影响行数；
# "execTime" - 执行时间。
# @type OrderBy: String
# @param Filter: 过滤条件。可按设置的过滤条件过滤日志。
# @type Filter: :class:`Tencentcloud::Cynosdb.v20190107.models.AuditLogFilter`
# @param Limit: 分页参数，单次返回的数据条数。默认值为100，最大值为100。
# @type Limit: Integer
# @param Offset: 分页偏移量。
# @type Offset: Integer
attr_accessor :InstanceId, :StartTime, :EndTime, :Order, :OrderBy, :Filter, :Limit, :Offset
def initialize(instanceid=nil, starttime=nil, endtime=nil, order=nil, orderby=nil, filter=nil, limit=nil, offset=nil)
@InstanceId = instanceid
@StartTime = starttime
@EndTime = endtime
@Order = order
@OrderBy = orderby
@Filter = filter
@Limit = limit
@Offset = offset
end
def deserialize(params)
@InstanceId = params['InstanceId']
@StartTime = params['StartTime']
@EndTime = params['EndTime']
@Order = params['Order']
@OrderBy = params['OrderBy']
unless params['Filter'].nil?
@Filter = AuditLogFilter.new
@Filter.deserialize(params['Filter'])
end
@Limit = params['Limit']
@Offset = params['Offset']
end
end
# DescribeAuditLogs返回参数结构体
class DescribeAuditLogsResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 符合条件的审计日志条数。
# @type TotalCount: Integer
# @param Items: 审计日志详情。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Items: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :Items, :RequestId
def initialize(totalcount=nil, items=nil, requestid=nil)
@TotalCount = totalcount
@Items = items
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['Items'].nil?
@Items = []
params['Items'].each do |i|
auditlog_tmp = AuditLog.new
auditlog_tmp.deserialize(i)
@Items << auditlog_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeAuditRuleTemplates请求参数结构体
class DescribeAuditRuleTemplatesRequest < TencentCloud::Common::AbstractModel
# @param RuleTemplateIds: 规则模版ID。
# @type RuleTemplateIds: Array
# @param RuleTemplateNames: 规则模版名称
# @type RuleTemplateNames: Array
# @param Limit: 单次请求返回的数量。默认值20。
# @type Limit: Integer
# @param Offset: 偏移量，默认值为 0。
# @type Offset: Integer
attr_accessor :RuleTemplateIds, :RuleTemplateNames, :Limit, :Offset
def initialize(ruletemplateids=nil, ruletemplatenames=nil, limit=nil, offset=nil)
@RuleTemplateIds = ruletemplateids
@RuleTemplateNames = ruletemplatenames
@Limit = limit
@Offset = offset
end
def deserialize(params)
@RuleTemplateIds = params['RuleTemplateIds']
@RuleTemplateNames = params['RuleTemplateNames']
@Limit = params['Limit']
@Offset = params['Offset']
end
end
# DescribeAuditRuleTemplates返回参数结构体
class DescribeAuditRuleTemplatesResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 符合查询条件的实例总数。
# @type TotalCount: Integer
# @param Items: 规则模版详细信息列表。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Items: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :Items, :RequestId
def initialize(totalcount=nil, items=nil, requestid=nil)
@TotalCount = totalcount
@Items = items
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['Items'].nil?
@Items = []
params['Items'].each do |i|
auditruletemplateinfo_tmp = AuditRuleTemplateInfo.new
auditruletemplateinfo_tmp.deserialize(i)
@Items << auditruletemplateinfo_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeAuditRuleWithInstanceIds请求参数结构体
class DescribeAuditRuleWithInstanceIdsRequest < TencentCloud::Common::AbstractModel
# @param InstanceIds: 实例ID。目前仅支持单个实例的查询。
# @type InstanceIds: Array
attr_accessor :InstanceIds
def initialize(instanceids=nil)
@InstanceIds = instanceids
end
def deserialize(params)
@InstanceIds = params['InstanceIds']
end
end
# DescribeAuditRuleWithInstanceIds返回参数结构体
class DescribeAuditRuleWithInstanceIdsResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 无
# @type TotalCount: Integer
# @param Items: 实例审计规则信息。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Items: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :Items, :RequestId
def initialize(totalcount=nil, items=nil, requestid=nil)
@TotalCount = totalcount
@Items = items
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['Items'].nil?
@Items = []
params['Items'].each do |i|
instanceauditrule_tmp = InstanceAuditRule.new
instanceauditrule_tmp.deserialize(i)
@Items << instanceauditrule_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeBackupConfig请求参数结构体
class DescribeBackupConfigRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
attr_accessor :ClusterId
def initialize(clusterid=nil)
@ClusterId = clusterid
end
def deserialize(params)
@ClusterId = params['ClusterId']
end
end
# DescribeBackupConfig返回参数结构体
class DescribeBackupConfigResponse < TencentCloud::Common::AbstractModel
# @param BackupTimeBeg: 表示全备开始时间，[0-24*3600]， 如0:00, 1:00, 2:00 分别为 0，3600， 7200
# @type BackupTimeBeg: Integer
# @param BackupTimeEnd: 表示全备开始时间，[0-24*3600]， 如0:00, 1:00, 2:00 分别为 0，3600， 7200
# @type BackupTimeEnd: Integer
# @param ReserveDuration: 表示保留备份时长, 单位秒，超过该时间将被清理, 七天表示为3600*24*7=604800
# @type ReserveDuration: Integer
# @param BackupFreq: 备份频率，长度为7的数组，分别对应周一到周日的备份方式，full-全量备份，increment-增量备份
# 注意：此字段可能返回 null，表示取不到有效值。
# @type BackupFreq: Array
# @param BackupType: 备份方式，logic-逻辑备份，snapshot-快照备份
# 注意：此字段可能返回 null，表示取不到有效值。
# @type BackupType: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :BackupTimeBeg, :BackupTimeEnd, :ReserveDuration, :BackupFreq, :BackupType, :RequestId
def initialize(backuptimebeg=nil, backuptimeend=nil, reserveduration=nil, backupfreq=nil, backuptype=nil, requestid=nil)
@BackupTimeBeg = backuptimebeg
@BackupTimeEnd = backuptimeend
@ReserveDuration = reserveduration
@BackupFreq = backupfreq
@BackupType = backuptype
@RequestId = requestid
end
def deserialize(params)
@BackupTimeBeg = params['BackupTimeBeg']
@BackupTimeEnd = params['BackupTimeEnd']
@ReserveDuration = params['ReserveDuration']
@BackupFreq = params['BackupFreq']
@BackupType = params['BackupType']
@RequestId = params['RequestId']
end
end
# DescribeBackupDownloadUrl请求参数结构体
class DescribeBackupDownloadUrlRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param BackupId: 备份ID
# @type BackupId: Integer
attr_accessor :ClusterId, :BackupId
def initialize(clusterid=nil, backupid=nil)
@ClusterId = clusterid
@BackupId = backupid
end
def deserialize(params)
@ClusterId = params['ClusterId']
@BackupId = params['BackupId']
end
end
# DescribeBackupDownloadUrl返回参数结构体
class DescribeBackupDownloadUrlResponse < TencentCloud::Common::AbstractModel
# @param DownloadUrl: 备份下载地址
# @type DownloadUrl: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :DownloadUrl, :RequestId
def initialize(downloadurl=nil, requestid=nil)
@DownloadUrl = downloadurl
@RequestId = requestid
end
def deserialize(params)
@DownloadUrl = params['DownloadUrl']
@RequestId = params['RequestId']
end
end
# DescribeBackupList请求参数结构体
class DescribeBackupListRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param Limit: 备份文件列表大小，取值范围(0,100]
# @type Limit: Integer
# @param Offset: 备份文件列表偏移，取值范围[0,INF)
# @type Offset: Integer
# @param DbType: 数据库类型，取值范围:
# <li> MYSQL </li>
# @type DbType: String
# @param BackupIds: 备份ID
# @type BackupIds: Array
# @param BackupType: 备份类型，可选值：snapshot，快照备份； logic，逻辑备份
# @type BackupType: String
# @param BackupMethod: 备份方式，可选值：auto，自动备份；manual，手动备
# @type BackupMethod: String
# @param SnapShotType: 快照类型，可选值：full，全量；increment，增量
# @type SnapShotType: String
# @param StartTime: 备份开始时间
# @type StartTime: String
# @param EndTime: 备份结束时间
# @type EndTime: String
# @param FileNames: 备份文件名，模糊查询
# @type FileNames: Array
# @param BackupNames: 备份备注名，模糊查询
# @type BackupNames: Array
# @param SnapshotIdList: 快照备份Id列表
# @type SnapshotIdList: Array
attr_accessor :ClusterId, :Limit, :Offset, :DbType, :BackupIds, :BackupType, :BackupMethod, :SnapShotType, :StartTime, :EndTime, :FileNames, :BackupNames, :SnapshotIdList
def initialize(clusterid=nil, limit=nil, offset=nil, dbtype=nil, backupids=nil, backuptype=nil, backupmethod=nil, snapshottype=nil, starttime=nil, endtime=nil, filenames=nil, backupnames=nil, snapshotidlist=nil)
@ClusterId = clusterid
@Limit = limit
@Offset = offset
@DbType = dbtype
@BackupIds = backupids
@BackupType = backuptype
@BackupMethod = backupmethod
@SnapShotType = snapshottype
@StartTime = starttime
@EndTime = endtime
@FileNames = filenames
@BackupNames = backupnames
@SnapshotIdList = snapshotidlist
end
def deserialize(params)
@ClusterId = params['ClusterId']
@Limit = params['Limit']
@Offset = params['Offset']
@DbType = params['DbType']
@BackupIds = params['BackupIds']
@BackupType = params['BackupType']
@BackupMethod = params['BackupMethod']
@SnapShotType = params['SnapShotType']
@StartTime = params['StartTime']
@EndTime = params['EndTime']
@FileNames = params['FileNames']
@BackupNames = params['BackupNames']
@SnapshotIdList = params['SnapshotIdList']
end
end
# DescribeBackupList返回参数结构体
class DescribeBackupListResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 总共备份文件个数
# @type TotalCount: Integer
# @param BackupList: 备份文件列表
# @type BackupList: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :BackupList, :RequestId
def initialize(totalcount=nil, backuplist=nil, requestid=nil)
@TotalCount = totalcount
@BackupList = backuplist
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['BackupList'].nil?
@BackupList = []
params['BackupList'].each do |i|
backupfileinfo_tmp = BackupFileInfo.new
backupfileinfo_tmp.deserialize(i)
@BackupList << backupfileinfo_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeBinlogDownloadUrl请求参数结构体
class DescribeBinlogDownloadUrlRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param BinlogId: Binlog文件ID
# @type BinlogId: Integer
attr_accessor :ClusterId, :BinlogId
def initialize(clusterid=nil, binlogid=nil)
@ClusterId = clusterid
@BinlogId = binlogid
end
def deserialize(params)
@ClusterId = params['ClusterId']
@BinlogId = params['BinlogId']
end
end
# DescribeBinlogDownloadUrl返回参数结构体
class DescribeBinlogDownloadUrlResponse < TencentCloud::Common::AbstractModel
# @param DownloadUrl: 下载地址
# @type DownloadUrl: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :DownloadUrl, :RequestId
def initialize(downloadurl=nil, requestid=nil)
@DownloadUrl = downloadurl
@RequestId = requestid
end
def deserialize(params)
@DownloadUrl = params['DownloadUrl']
@RequestId = params['RequestId']
end
end
# DescribeBinlogSaveDays请求参数结构体
class DescribeBinlogSaveDaysRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
attr_accessor :ClusterId
def initialize(clusterid=nil)
@ClusterId = clusterid
end
def deserialize(params)
@ClusterId = params['ClusterId']
end
end
# DescribeBinlogSaveDays返回参数结构体
class DescribeBinlogSaveDaysResponse < TencentCloud::Common::AbstractModel
# @param BinlogSaveDays: Binlog保留天数
# @type BinlogSaveDays: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :BinlogSaveDays, :RequestId
def initialize(binlogsavedays=nil, requestid=nil)
@BinlogSaveDays = binlogsavedays
@RequestId = requestid
end
def deserialize(params)
@BinlogSaveDays = params['BinlogSaveDays']
@RequestId = params['RequestId']
end
end
# DescribeBinlogs请求参数结构体
class DescribeBinlogsRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param StartTime: 开始时间
# @type StartTime: String
# @param EndTime: 结束时间
# @type EndTime: String
# @param Offset: 偏移量
# @type Offset: Integer
# @param Limit: 限制条数
# @type Limit: Integer
attr_accessor :ClusterId, :StartTime, :EndTime, :Offset, :Limit
def initialize(clusterid=nil, starttime=nil, endtime=nil, offset=nil, limit=nil)
@ClusterId = clusterid
@StartTime = starttime
@EndTime = endtime
@Offset = offset
@Limit = limit
end
def deserialize(params)
@ClusterId = params['ClusterId']
@StartTime = params['StartTime']
@EndTime = params['EndTime']
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribeBinlogs返回参数结构体
class DescribeBinlogsResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 记录总条数
# @type TotalCount: Integer
# @param Binlogs: Binlog列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Binlogs: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :Binlogs, :RequestId
def initialize(totalcount=nil, binlogs=nil, requestid=nil)
@TotalCount = totalcount
@Binlogs = binlogs
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['Binlogs'].nil?
@Binlogs = []
params['Binlogs'].each do |i|
binlogitem_tmp = BinlogItem.new
binlogitem_tmp.deserialize(i)
@Binlogs << binlogitem_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeClusterDetail请求参数结构体
class DescribeClusterDetailRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群Id
# @type ClusterId: String
attr_accessor :ClusterId
def initialize(clusterid=nil)
@ClusterId = clusterid
end
def deserialize(params)
@ClusterId = params['ClusterId']
end
end
# DescribeClusterDetail返回参数结构体
class DescribeClusterDetailResponse < TencentCloud::Common::AbstractModel
# @param Detail: 集群详细信息
# @type Detail: :class:`Tencentcloud::Cynosdb.v20190107.models.CynosdbClusterDetail`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Detail, :RequestId
def initialize(detail=nil, requestid=nil)
@Detail = detail
@RequestId = requestid
end
def deserialize(params)
unless params['Detail'].nil?
@Detail = CynosdbClusterDetail.new
@Detail.deserialize(params['Detail'])
end
@RequestId = params['RequestId']
end
end
# DescribeClusterInstanceGrps请求参数结构体
class DescribeClusterInstanceGrpsRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
attr_accessor :ClusterId
def initialize(clusterid=nil)
@ClusterId = clusterid
end
def deserialize(params)
@ClusterId = params['ClusterId']
end
end
# DescribeClusterInstanceGrps返回参数结构体
class DescribeClusterInstanceGrpsResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 实例组个数
# @type TotalCount: Integer
# @param InstanceGrpInfoList: 实例组列表
# @type InstanceGrpInfoList: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :InstanceGrpInfoList, :RequestId
def initialize(totalcount=nil, instancegrpinfolist=nil, requestid=nil)
@TotalCount = totalcount
@InstanceGrpInfoList = instancegrpinfolist
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['InstanceGrpInfoList'].nil?
@InstanceGrpInfoList = []
params['InstanceGrpInfoList'].each do |i|
cynosdbinstancegrp_tmp = CynosdbInstanceGrp.new
cynosdbinstancegrp_tmp.deserialize(i)
@InstanceGrpInfoList << cynosdbinstancegrp_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeClusterParamLogs请求参数结构体
class DescribeClusterParamLogsRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param InstanceIds: 实例ID列表，用来记录具体操作哪些实例
# @type InstanceIds: Array
# @param OrderBy: 排序字段，定义在回返结果的基于哪个字段进行排序
# @type OrderBy: String
# @param OrderByType: 定义具体的排序规则，限定为desc,asc,DESC,ASC其中之一
# @type OrderByType: String
# @param Limit: 返回数量，默认为 20，取值范围为(0,100]
# @type Limit: Integer
# @param Offset: 记录偏移量，默认值为0，取值范围为[0,INF)
# @type Offset: Integer
attr_accessor :ClusterId, :InstanceIds, :OrderBy, :OrderByType, :Limit, :Offset
def initialize(clusterid=nil, instanceids=nil, orderby=nil, orderbytype=nil, limit=nil, offset=nil)
@ClusterId = clusterid
@InstanceIds = instanceids
@OrderBy = orderby
@OrderByType = orderbytype
@Limit = limit
@Offset = offset
end
def deserialize(params)
@ClusterId = params['ClusterId']
@InstanceIds = params['InstanceIds']
@OrderBy = params['OrderBy']
@OrderByType = params['OrderByType']
@Limit = params['Limit']
@Offset = params['Offset']
end
end
# DescribeClusterParamLogs返回参数结构体
class DescribeClusterParamLogsResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 记录总数
# @type TotalCount: Integer
# @param ClusterParamLogs: 参数修改记录
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ClusterParamLogs: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :ClusterParamLogs, :RequestId
def initialize(totalcount=nil, clusterparamlogs=nil, requestid=nil)
@TotalCount = totalcount
@ClusterParamLogs = clusterparamlogs
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['ClusterParamLogs'].nil?
@ClusterParamLogs = []
params['ClusterParamLogs'].each do |i|
clusterparammodifylog_tmp = ClusterParamModifyLog.new
clusterparammodifylog_tmp.deserialize(i)
@ClusterParamLogs << clusterparammodifylog_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeClusterParams请求参数结构体
class DescribeClusterParamsRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param ParamName: 参数名字
# @type ParamName: String
attr_accessor :ClusterId, :ParamName
def initialize(clusterid=nil, paramname=nil)
@ClusterId = clusterid
@ParamName = paramname
end
def deserialize(params)
@ClusterId = params['ClusterId']
@ParamName = params['ParamName']
end
end
# DescribeClusterParams返回参数结构体
class DescribeClusterParamsResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 参数个数
# @type TotalCount: Integer
# @param Items: 实例参数列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Items: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :Items, :RequestId
def initialize(totalcount=nil, items=nil, requestid=nil)
@TotalCount = totalcount
@Items = items
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['Items'].nil?
@Items = []
params['Items'].each do |i|
paraminfo_tmp = ParamInfo.new
paraminfo_tmp.deserialize(i)
@Items << paraminfo_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeClusters请求参数结构体
class DescribeClustersRequest < TencentCloud::Common::AbstractModel
# @param DbType: 引擎类型：目前支持“MYSQL”， “POSTGRESQL”
# @type DbType: String
# @param Limit: 返回数量，默认为 20，最大值为 100
# @type Limit: Integer
# @param Offset: 记录偏移量，默认值为0
# @type Offset: Integer
# @param OrderBy: 排序字段，取值范围：
# <li> CREATETIME：创建时间</li>
# <li> PERIODENDTIME：过期时间</li>
# @type OrderBy: String
# @param OrderByType: 排序类型，取值范围：
# <li> ASC：升序排序 </li>
# <li> DESC：降序排序 </li>
# @type OrderByType: String
# @param Filters: 搜索条件，若存在多个Filter时，Filter间的关系为逻辑与（AND）关系。
# @type Filters: Array
attr_accessor :DbType, :Limit, :Offset, :OrderBy, :OrderByType, :Filters
def initialize(dbtype=nil, limit=nil, offset=nil, orderby=nil, orderbytype=nil, filters=nil)
@DbType = dbtype
@Limit = limit
@Offset = offset
@OrderBy = orderby
@OrderByType = orderbytype
@Filters = filters
end
def deserialize(params)
@DbType = params['DbType']
@Limit = params['Limit']
@Offset = params['Offset']
@OrderBy = params['OrderBy']
@OrderByType = params['OrderByType']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
queryfilter_tmp = QueryFilter.new
queryfilter_tmp.deserialize(i)
@Filters << queryfilter_tmp
end
end
end
end
# DescribeClusters返回参数结构体
class DescribeClustersResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 集群数
# @type TotalCount: Integer
# @param ClusterSet: 集群列表
# @type ClusterSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :ClusterSet, :RequestId
def initialize(totalcount=nil, clusterset=nil, requestid=nil)
@TotalCount = totalcount
@ClusterSet = clusterset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['ClusterSet'].nil?
@ClusterSet = []
params['ClusterSet'].each do |i|
cynosdbcluster_tmp = CynosdbCluster.new
cynosdbcluster_tmp.deserialize(i)
@ClusterSet << cynosdbcluster_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeDBSecurityGroups请求参数结构体
class DescribeDBSecurityGroupsRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例组ID
# @type InstanceId: String
attr_accessor :InstanceId
def initialize(instanceid=nil)
@InstanceId = instanceid
end
def deserialize(params)
@InstanceId = params['InstanceId']
end
end
# DescribeDBSecurityGroups返回参数结构体
class DescribeDBSecurityGroupsResponse < TencentCloud::Common::AbstractModel
# @param Groups: 安全组信息
# @type Groups: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Groups, :RequestId
def initialize(groups=nil, requestid=nil)
@Groups = groups
@RequestId = requestid
end
def deserialize(params)
unless params['Groups'].nil?
@Groups = []
params['Groups'].each do |i|
securitygroup_tmp = SecurityGroup.new
securitygroup_tmp.deserialize(i)
@Groups << securitygroup_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeFlow请求参数结构体
class DescribeFlowRequest < TencentCloud::Common::AbstractModel
# @param FlowId: 任务流ID
# @type FlowId: Integer
attr_accessor :FlowId
def initialize(flowid=nil)
@FlowId = flowid
end
def deserialize(params)
@FlowId = params['FlowId']
end
end
# DescribeFlow返回参数结构体
class DescribeFlowResponse < TencentCloud::Common::AbstractModel
# @param Status: 任务流状态。0-成功，1-失败，2-处理中
# @type Status: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Status, :RequestId
def initialize(status=nil, requestid=nil)
@Status = status
@RequestId = requestid
end
def deserialize(params)
@Status = params['Status']
@RequestId = params['RequestId']
end
end
# DescribeInstanceDetail请求参数结构体
class DescribeInstanceDetailRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
attr_accessor :InstanceId
def initialize(instanceid=nil)
@InstanceId = instanceid
end
def deserialize(params)
@InstanceId = params['InstanceId']
end
end
# DescribeInstanceDetail返回参数结构体
class DescribeInstanceDetailResponse < TencentCloud::Common::AbstractModel
# @param Detail: 实例详情
# @type Detail: :class:`Tencentcloud::Cynosdb.v20190107.models.CynosdbInstanceDetail`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Detail, :RequestId
def initialize(detail=nil, requestid=nil)
@Detail = detail
@RequestId = requestid
end
def deserialize(params)
unless params['Detail'].nil?
@Detail = CynosdbInstanceDetail.new
@Detail.deserialize(params['Detail'])
end
@RequestId = params['RequestId']
end
end
# DescribeInstanceSlowQueries请求参数结构体
class DescribeInstanceSlowQueriesRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param StartTime: 事务开始最早时间
# @type StartTime: String
# @param EndTime: 事务开始最晚时间
# @type EndTime: String
# @param Limit: 限制条数
# @type Limit: Integer
# @param Offset: 偏移量
# @type Offset: Integer
# @param Username: 用户名
# @type Username: String
# @param Host: 客户端host
# @type Host: String
# @param Database: 数据库名
# @type Database: String
# @param OrderBy: 排序字段，可选值：QueryTime,LockTime,RowsExamined,RowsSent
# @type OrderBy: String
# @param OrderByType: 排序类型，可选值：asc,desc
# @type OrderByType: String
attr_accessor :InstanceId, :StartTime, :EndTime, :Limit, :Offset, :Username, :Host, :Database, :OrderBy, :OrderByType
def initialize(instanceid=nil, starttime=nil, endtime=nil, limit=nil, offset=nil, username=nil, host=nil, database=nil, orderby=nil, orderbytype=nil)
@InstanceId = instanceid
@StartTime = starttime
@EndTime = endtime
@Limit = limit
@Offset = offset
@Username = username
@Host = host
@Database = database
@OrderBy = orderby
@OrderByType = orderbytype
end
def deserialize(params)
@InstanceId = params['InstanceId']
@StartTime = params['StartTime']
@EndTime = params['EndTime']
@Limit = params['Limit']
@Offset = params['Offset']
@Username = params['Username']
@Host = params['Host']
@Database = params['Database']
@OrderBy = params['OrderBy']
@OrderByType = params['OrderByType']
end
end
# DescribeInstanceSlowQueries返回参数结构体
class DescribeInstanceSlowQueriesResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 总条数
# @type TotalCount: Integer
# @param SlowQueries: 慢查询记录
# @type SlowQueries: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :SlowQueries, :RequestId
def initialize(totalcount=nil, slowqueries=nil, requestid=nil)
@TotalCount = totalcount
@SlowQueries = slowqueries
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['SlowQueries'].nil?
@SlowQueries = []
params['SlowQueries'].each do |i|
slowqueriesitem_tmp = SlowQueriesItem.new
slowqueriesitem_tmp.deserialize(i)
@SlowQueries << slowqueriesitem_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeInstanceSpecs请求参数结构体
class DescribeInstanceSpecsRequest < TencentCloud::Common::AbstractModel
# @param DbType: 数据库类型，取值范围:
# <li> MYSQL </li>
# @type DbType: String
# @param IncludeZoneStocks: 是否需要返回可用区信息
# @type IncludeZoneStocks: Boolean
attr_accessor :DbType, :IncludeZoneStocks
def initialize(dbtype=nil, includezonestocks=nil)
@DbType = dbtype
@IncludeZoneStocks = includezonestocks
end
def deserialize(params)
@DbType = params['DbType']
@IncludeZoneStocks = params['IncludeZoneStocks']
end
end
# DescribeInstanceSpecs返回参数结构体
class DescribeInstanceSpecsResponse < TencentCloud::Common::AbstractModel
# @param InstanceSpecSet: 规格信息
# @type InstanceSpecSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :InstanceSpecSet, :RequestId
def initialize(instancespecset=nil, requestid=nil)
@InstanceSpecSet = instancespecset
@RequestId = requestid
end
def deserialize(params)
unless params['InstanceSpecSet'].nil?
@InstanceSpecSet = []
params['InstanceSpecSet'].each do |i|
instancespec_tmp = InstanceSpec.new
instancespec_tmp.deserialize(i)
@InstanceSpecSet << instancespec_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeInstances请求参数结构体
class DescribeInstancesRequest < TencentCloud::Common::AbstractModel
# @param Limit: 返回数量，默认为 20，最大值为 100
# @type Limit: Integer
# @param Offset: 记录偏移量，默认值为0
# @type Offset: Integer
# @param OrderBy: 排序字段，取值范围：
# <li> CREATETIME：创建时间</li>
# <li> PERIODENDTIME：过期时间</li>
# @type OrderBy: String
# @param OrderByType: 排序类型，取值范围：
# <li> ASC：升序排序 </li>
# <li> DESC：降序排序 </li>
# @type OrderByType: String
# @param Filters: 搜索条件，若存在多个Filter时，Filter间的关系为逻辑与（AND）关系。
# @type Filters: Array
# @param DbType: 引擎类型：目前支持“MYSQL”， “POSTGRESQL”
# @type DbType: String
# @param Status: 实例状态, 可选值:
# creating 创建中
# running 运行中
# isolating 隔离中
# isolated 已隔离
# activating 恢复中
# offlining 下线中
# offlined 已下线
# @type Status: String
# @param InstanceIds: 实例id列表
# @type InstanceIds: Array
attr_accessor :Limit, :Offset, :OrderBy, :OrderByType, :Filters, :DbType, :Status, :InstanceIds
def initialize(limit=nil, offset=nil, orderby=nil, orderbytype=nil, filters=nil, dbtype=nil, status=nil, instanceids=nil)
@Limit = limit
@Offset = offset
@OrderBy = orderby
@OrderByType = orderbytype
@Filters = filters
@DbType = dbtype
@Status = status
@InstanceIds = instanceids
end
def deserialize(params)
@Limit = params['Limit']
@Offset = params['Offset']
@OrderBy = params['OrderBy']
@OrderByType = params['OrderByType']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
queryfilter_tmp = QueryFilter.new
queryfilter_tmp.deserialize(i)
@Filters << queryfilter_tmp
end
end
@DbType = params['DbType']
@Status = params['Status']
@InstanceIds = params['InstanceIds']
end
end
# DescribeInstances返回参数结构体
class DescribeInstancesResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 实例个数
# @type TotalCount: Integer
# @param InstanceSet: 实例列表
# @type InstanceSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :InstanceSet, :RequestId
def initialize(totalcount=nil, instanceset=nil, requestid=nil)
@TotalCount = totalcount
@InstanceSet = instanceset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['InstanceSet'].nil?
@InstanceSet = []
params['InstanceSet'].each do |i|
cynosdbinstance_tmp = CynosdbInstance.new
cynosdbinstance_tmp.deserialize(i)
@InstanceSet << cynosdbinstance_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeMaintainPeriod请求参数结构体
class DescribeMaintainPeriodRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
attr_accessor :InstanceId
def initialize(instanceid=nil)
@InstanceId = instanceid
end
def deserialize(params)
@InstanceId = params['InstanceId']
end
end
# DescribeMaintainPeriod返回参数结构体
class DescribeMaintainPeriodResponse < TencentCloud::Common::AbstractModel
# @param MaintainWeekDays: 维护week days
# @type MaintainWeekDays: Array
# @param MaintainStartTime: 维护开始时间，单位秒
# @type MaintainStartTime: Integer
# @param MaintainDuration: 维护时长，单位秒
# @type MaintainDuration: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :MaintainWeekDays, :MaintainStartTime, :MaintainDuration, :RequestId
def initialize(maintainweekdays=nil, maintainstarttime=nil, maintainduration=nil, requestid=nil)
@MaintainWeekDays = maintainweekdays
@MaintainStartTime = maintainstarttime
@MaintainDuration = maintainduration
@RequestId = requestid
end
def deserialize(params)
@MaintainWeekDays = params['MaintainWeekDays']
@MaintainStartTime = params['MaintainStartTime']
@MaintainDuration = params['MaintainDuration']
@RequestId = params['RequestId']
end
end
# DescribeParamTemplates请求参数结构体
class DescribeParamTemplatesRequest < TencentCloud::Common::AbstractModel
# @param EngineVersions: 数据库引擎版本号
# @type EngineVersions: Array
# @param TemplateNames: 模版名称
# @type TemplateNames: Array
# @param TemplateIds: 模版ID
# @type TemplateIds: Array
# @param DbModes: 数据库类型，可选值：NORMAL，SERVERLESS
# @type DbModes: Array
# @param Offset: 查询偏移量
# @type Offset: Integer
# @param Limit: 查询限制条数
# @type Limit: Integer
# @param Products: 查询的模板对应的产品类型
# @type Products: Array
# @param TemplateTypes: 模版类型
# @type TemplateTypes: Array
# @param EngineTypes: 版本类型
# @type EngineTypes: Array
# @param OrderBy: 返回结果的排序字段
# @type OrderBy: String
# @param OrderDirection: 排序方式（asc、desc）
# @type OrderDirection: String
attr_accessor :EngineVersions, :TemplateNames, :TemplateIds, :DbModes, :Offset, :Limit, :Products, :TemplateTypes, :EngineTypes, :OrderBy, :OrderDirection
def initialize(engineversions=nil, templatenames=nil, templateids=nil, dbmodes=nil, offset=nil, limit=nil, products=nil, templatetypes=nil, enginetypes=nil, orderby=nil, orderdirection=nil)
@EngineVersions = engineversions
@TemplateNames = templatenames
@TemplateIds = templateids
@DbModes = dbmodes
@Offset = offset
@Limit = limit
@Products = products
@TemplateTypes = templatetypes
@EngineTypes = enginetypes
@OrderBy = orderby
@OrderDirection = orderdirection
end
def deserialize(params)
@EngineVersions = params['EngineVersions']
@TemplateNames = params['TemplateNames']
@TemplateIds = params['TemplateIds']
@DbModes = params['DbModes']
@Offset = params['Offset']
@Limit = params['Limit']
@Products = params['Products']
@TemplateTypes = params['TemplateTypes']
@EngineTypes = params['EngineTypes']
@OrderBy = params['OrderBy']
@OrderDirection = params['OrderDirection']
end
end
# DescribeParamTemplates返回参数结构体
class DescribeParamTemplatesResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 参数模板数量
# @type TotalCount: Integer
# @param Items: 参数模板信息
# @type Items: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :Items, :RequestId
def initialize(totalcount=nil, items=nil, requestid=nil)
@TotalCount = totalcount
@Items = items
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['Items'].nil?
@Items = []
params['Items'].each do |i|
paramtemplatelistinfo_tmp = ParamTemplateListInfo.new
paramtemplatelistinfo_tmp.deserialize(i)
@Items << paramtemplatelistinfo_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeProjectSecurityGroups请求参数结构体
class DescribeProjectSecurityGroupsRequest < TencentCloud::Common::AbstractModel
# @param ProjectId: 项目ID
# @type ProjectId: Integer
# @param Limit: 限制量
# @type Limit: Integer
# @param Offset: 偏移量
# @type Offset: Integer
# @param SearchKey: 搜索关键字
# @type SearchKey: String
attr_accessor :ProjectId, :Limit, :Offset, :SearchKey
def initialize(projectid=nil, limit=nil, offset=nil, searchkey=nil)
@ProjectId = projectid
@Limit = limit
@Offset = offset
@SearchKey = searchkey
end
def deserialize(params)
@ProjectId = params['ProjectId']
@Limit = params['Limit']
@Offset = params['Offset']
@SearchKey = params['SearchKey']
end
end
# DescribeProjectSecurityGroups返回参数结构体
class DescribeProjectSecurityGroupsResponse < TencentCloud::Common::AbstractModel
# @param Groups: 安全组详情
# @type Groups: Array
# @param Total: 总数量
# @type Total: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Groups, :Total, :RequestId
def initialize(groups=nil, total=nil, requestid=nil)
@Groups = groups
@Total = total
@RequestId = requestid
end
def deserialize(params)
unless params['Groups'].nil?
@Groups = []
params['Groups'].each do |i|
securitygroup_tmp = SecurityGroup.new
securitygroup_tmp.deserialize(i)
@Groups << securitygroup_tmp
end
end
@Total = params['Total']
@RequestId = params['RequestId']
end
end
# DescribeResourcesByDealName请求参数结构体
class DescribeResourcesByDealNameRequest < TencentCloud::Common::AbstractModel
# @param DealName: 计费订单ID（如果计费还没回调业务发货，可能出现错误码InvalidParameterValue.DealNameNotFound，这种情况需要业务重试DescribeResourcesByDealName接口直到成功）
# @type DealName: String
# @param DealNames: 计费订单ID列表，可以一次查询若干条订单ID对应资源信息（如果计费还没回调业务发货，可能出现错误码InvalidParameterValue.DealNameNotFound，这种情况需要业务重试DescribeResourcesByDealName接口直到成功）
# @type DealNames: Array
attr_accessor :DealName, :DealNames
def initialize(dealname=nil, dealnames=nil)
@DealName = dealname
@DealNames = dealnames
end
def deserialize(params)
@DealName = params['DealName']
@DealNames = params['DealNames']
end
end
# DescribeResourcesByDealName返回参数结构体
class DescribeResourcesByDealNameResponse < TencentCloud::Common::AbstractModel
# @param BillingResourceInfos: 计费资源id信息数组
# @type BillingResourceInfos: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :BillingResourceInfos, :RequestId
def initialize(billingresourceinfos=nil, requestid=nil)
@BillingResourceInfos = billingresourceinfos
@RequestId = requestid
end
def deserialize(params)
unless params['BillingResourceInfos'].nil?
@BillingResourceInfos = []
params['BillingResourceInfos'].each do |i|
billingresourceinfo_tmp = BillingResourceInfo.new
billingresourceinfo_tmp.deserialize(i)
@BillingResourceInfos << billingresourceinfo_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeRollbackTimeRange请求参数结构体
class DescribeRollbackTimeRangeRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
attr_accessor :ClusterId
def initialize(clusterid=nil)
@ClusterId = clusterid
end
def deserialize(params)
@ClusterId = params['ClusterId']
end
end
# DescribeRollbackTimeRange返回参数结构体
class DescribeRollbackTimeRangeResponse < TencentCloud::Common::AbstractModel
# @param TimeRangeStart: 有效回归时间范围开始时间点（已废弃）
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TimeRangeStart: String
# @param TimeRangeEnd: 有效回归时间范围结束时间点（已废弃）
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TimeRangeEnd: String
# @param RollbackTimeRanges: 可回档时间范围
# @type RollbackTimeRanges: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TimeRangeStart, :TimeRangeEnd, :RollbackTimeRanges, :RequestId
def initialize(timerangestart=nil, timerangeend=nil, rollbacktimeranges=nil, requestid=nil)
@TimeRangeStart = timerangestart
@TimeRangeEnd = timerangeend
@RollbackTimeRanges = rollbacktimeranges
@RequestId = requestid
end
def deserialize(params)
@TimeRangeStart = params['TimeRangeStart']
@TimeRangeEnd = params['TimeRangeEnd']
unless params['RollbackTimeRanges'].nil?
@RollbackTimeRanges = []
params['RollbackTimeRanges'].each do |i|
rollbacktimerange_tmp = RollbackTimeRange.new
rollbacktimerange_tmp.deserialize(i)
@RollbackTimeRanges << rollbacktimerange_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeRollbackTimeValidity请求参数结构体
class DescribeRollbackTimeValidityRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param ExpectTime: 期望回滚的时间点
# @type ExpectTime: String
# @param ExpectTimeThresh: 回滚时间点的允许误差范围
# @type ExpectTimeThresh: Integer
attr_accessor :ClusterId, :ExpectTime, :ExpectTimeThresh
def initialize(clusterid=nil, expecttime=nil, expecttimethresh=nil)
@ClusterId = clusterid
@ExpectTime = expecttime
@ExpectTimeThresh = expecttimethresh
end
def deserialize(params)
@ClusterId = params['ClusterId']
@ExpectTime = params['ExpectTime']
@ExpectTimeThresh = params['ExpectTimeThresh']
end
end
# DescribeRollbackTimeValidity返回参数结构体
class DescribeRollbackTimeValidityResponse < TencentCloud::Common::AbstractModel
# @param PoolId: 存储poolID
# @type PoolId: Integer
# @param QueryId: 回滚任务ID，后续按该时间点回滚时，需要传入
# @type QueryId: Integer
# @param Status: 时间点是否有效：pass，检测通过；fail，检测失败
# @type Status: String
# @param SuggestTime: 建议时间点，在Status为fail时，该值才有效
# @type SuggestTime: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :PoolId, :QueryId, :Status, :SuggestTime, :RequestId
def initialize(poolid=nil, queryid=nil, status=nil, suggesttime=nil, requestid=nil)
@PoolId = poolid
@QueryId = queryid
@Status = status
@SuggestTime = suggesttime
@RequestId = requestid
end
def deserialize(params)
@PoolId = params['PoolId']
@QueryId = params['QueryId']
@Status = params['Status']
@SuggestTime = params['SuggestTime']
@RequestId = params['RequestId']
end
end
# DescribeZones请求参数结构体
class DescribeZonesRequest < TencentCloud::Common::AbstractModel
# @param IncludeVirtualZones: 是否包含虚拟区
# @type IncludeVirtualZones: Boolean
# @param ShowPermission: 是否展示地域下所有可用区，并显示用户每个可用区权限
# @type ShowPermission: Boolean
attr_accessor :IncludeVirtualZones, :ShowPermission
def initialize(includevirtualzones=nil, showpermission=nil)
@IncludeVirtualZones = includevirtualzones
@ShowPermission = showpermission
end
def deserialize(params)
@IncludeVirtualZones = params['IncludeVirtualZones']
@ShowPermission = params['ShowPermission']
end
end
# DescribeZones返回参数结构体
class DescribeZonesResponse < TencentCloud::Common::AbstractModel
# @param RegionSet: 地域信息
# @type RegionSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RegionSet, :RequestId
def initialize(regionset=nil, requestid=nil)
@RegionSet = regionset
@RequestId = requestid
end
def deserialize(params)
unless params['RegionSet'].nil?
@RegionSet = []
params['RegionSet'].each do |i|
saleregion_tmp = SaleRegion.new
saleregion_tmp.deserialize(i)
@RegionSet << saleregion_tmp
end
end
@RequestId = params['RequestId']
end
end
# DisassociateSecurityGroups请求参数结构体
class DisassociateSecurityGroupsRequest < TencentCloud::Common::AbstractModel
# @param InstanceIds: 实例组ID数组
# @type InstanceIds: Array
# @param SecurityGroupIds: 要修改的安全组ID列表，一个或者多个安全组ID组成的数组。
# @type SecurityGroupIds: Array
# @param Zone: 可用区
# @type Zone: String
attr_accessor :InstanceIds, :SecurityGroupIds, :Zone
def initialize(instanceids=nil, securitygroupids=nil, zone=nil)
@InstanceIds = instanceids
@SecurityGroupIds = securitygroupids
@Zone = zone
end
def deserialize(params)
@InstanceIds = params['InstanceIds']
@SecurityGroupIds = params['SecurityGroupIds']
@Zone = params['Zone']
end
end
# DisassociateSecurityGroups返回参数结构体
class DisassociateSecurityGroupsResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ExportInstanceSlowQueries请求参数结构体
class ExportInstanceSlowQueriesRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param StartTime: 事务开始最早时间
# @type StartTime: String
# @param EndTime: 事务开始最晚时间
# @type EndTime: String
# @param Limit: 限制条数
# @type Limit: Integer
# @param Offset: 偏移量
# @type Offset: Integer
# @param Username: 用户名
# @type Username: String
# @param Host: 客户端host
# @type Host: String
# @param Database: 数据库名
# @type Database: String
# @param FileType: 文件类型，可选值：csv, original
# @type FileType: String
attr_accessor :InstanceId, :StartTime, :EndTime, :Limit, :Offset, :Username, :Host, :Database, :FileType
def initialize(instanceid=nil, starttime=nil, endtime=nil, limit=nil, offset=nil, username=nil, host=nil, database=nil, filetype=nil)
@InstanceId = instanceid
@StartTime = starttime
@EndTime = endtime
@Limit = limit
@Offset = offset
@Username = username
@Host = host
@Database = database
@FileType = filetype
end
def deserialize(params)
@InstanceId = params['InstanceId']
@StartTime = params['StartTime']
@EndTime = params['EndTime']
@Limit = params['Limit']
@Offset = params['Offset']
@Username = params['Username']
@Host = params['Host']
@Database = params['Database']
@FileType = params['FileType']
end
end
# ExportInstanceSlowQueries返回参数结构体
class ExportInstanceSlowQueriesResponse < TencentCloud::Common::AbstractModel
# @param FileContent: 慢查询导出内容
# @type FileContent: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :FileContent, :RequestId
def initialize(filecontent=nil, requestid=nil)
@FileContent = filecontent
@RequestId = requestid
end
def deserialize(params)
@FileContent = params['FileContent']
@RequestId = params['RequestId']
end
end
# GrantAccountPrivileges请求参数结构体
class GrantAccountPrivilegesRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群id
# @type ClusterId: String
# @param Account: 账号信息
# @type Account: :class:`Tencentcloud::Cynosdb.v20190107.models.InputAccount`
# @param DbTablePrivileges: 数据库表权限码数组
# @type DbTablePrivileges: Array
# @param DbTables: 数据库表信息
# @type DbTables: Array
attr_accessor :ClusterId, :Account, :DbTablePrivileges, :DbTables
def initialize(clusterid=nil, account=nil, dbtableprivileges=nil, dbtables=nil)
@ClusterId = clusterid
@Account = account
@DbTablePrivileges = dbtableprivileges
@DbTables = dbtables
end
def deserialize(params)
@ClusterId = params['ClusterId']
unless params['Account'].nil?
@Account = InputAccount.new
@Account.deserialize(params['Account'])
end
@DbTablePrivileges = params['DbTablePrivileges']
unless params['DbTables'].nil?
@DbTables = []
params['DbTables'].each do |i|
dbtable_tmp = DbTable.new
dbtable_tmp.deserialize(i)
@DbTables << dbtable_tmp
end
end
end
end
# GrantAccountPrivileges返回参数结构体
class GrantAccountPrivilegesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# 账号，包含accountName和host
class InputAccount < TencentCloud::Common::AbstractModel
# @param AccountName: 账号
# @type AccountName: String
# @param Host: 主机，默认‘%’
# @type Host: String
attr_accessor :AccountName, :Host
def initialize(accountname=nil, host=nil)
@AccountName = accountname
@Host = host
end
def deserialize(params)
@AccountName = params['AccountName']
@Host = params['Host']
end
end
# InquirePriceCreate请求参数结构体
class InquirePriceCreateRequest < TencentCloud::Common::AbstractModel
# @param Zone: 可用区,每个地域提供最佳实践
# @type Zone: String
# @param GoodsNum: 购买计算节点个数
# @type GoodsNum: Integer
# @param InstancePayMode: 实例购买类型，可选值为：PREPAID, POSTPAID, SERVERLESS
# @type InstancePayMode: String
# @param StoragePayMode: 存储购买类型，可选值为：PREPAID, POSTPAID
# @type StoragePayMode: String
# @param Cpu: CPU核数，PREPAID与POSTPAID实例类型必传
# @type Cpu: Integer
# @param Memory: 内存大小，单位G，PREPAID与POSTPAID实例类型必传
# @type Memory: Integer
# @param Ccu: Ccu大小，serverless类型必传
# @type Ccu: Float
# @param StorageLimit: 存储大小，PREPAID存储类型必传
# @type StorageLimit: Integer
# @param TimeSpan: 购买时长，PREPAID购买类型必传
# @type TimeSpan: Integer
# @param TimeUnit: 时长单位，可选值为：m,d。PREPAID购买类型必传
# @type TimeUnit: String
attr_accessor :Zone, :GoodsNum, :InstancePayMode, :StoragePayMode, :Cpu, :Memory, :Ccu, :StorageLimit, :TimeSpan, :TimeUnit
def initialize(zone=nil, goodsnum=nil, instancepaymode=nil, storagepaymode=nil, cpu=nil, memory=nil, ccu=nil, storagelimit=nil, timespan=nil, timeunit=nil)
@Zone = zone
@GoodsNum = goodsnum
@InstancePayMode = instancepaymode
@StoragePayMode = storagepaymode
@Cpu = cpu
@Memory = memory
@Ccu = ccu
@StorageLimit = storagelimit
@TimeSpan = timespan
@TimeUnit = timeunit
end
def deserialize(params)
@Zone = params['Zone']
@GoodsNum = params['GoodsNum']
@InstancePayMode = params['InstancePayMode']
@StoragePayMode = params['StoragePayMode']
@Cpu = params['Cpu']
@Memory = params['Memory']
@Ccu = params['Ccu']
@StorageLimit = params['StorageLimit']
@TimeSpan = params['TimeSpan']
@TimeUnit = params['TimeUnit']
end
end
# InquirePriceCreate返回参数结构体
class InquirePriceCreateResponse < TencentCloud::Common::AbstractModel
# @param InstancePrice: 实例价格
# @type InstancePrice: :class:`Tencentcloud::Cynosdb.v20190107.models.TradePrice`
# @param StoragePrice: 存储价格
# @type StoragePrice: :class:`Tencentcloud::Cynosdb.v20190107.models.TradePrice`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :InstancePrice, :StoragePrice, :RequestId
def initialize(instanceprice=nil, storageprice=nil, requestid=nil)
@InstancePrice = instanceprice
@StoragePrice = storageprice
@RequestId = requestid
end
def deserialize(params)
unless params['InstancePrice'].nil?
@InstancePrice = TradePrice.new
@InstancePrice.deserialize(params['InstancePrice'])
end
unless params['StoragePrice'].nil?
@StoragePrice = TradePrice.new
@StoragePrice.deserialize(params['StoragePrice'])
end
@RequestId = params['RequestId']
end
end
# InquirePriceRenew请求参数结构体
class InquirePriceRenewRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param TimeSpan: 购买时长,与TimeUnit组合才能生效
# @type TimeSpan: Integer
# @param TimeUnit: 购买时长单位, 与TimeSpan组合生效，可选:日:d,月:m
# @type TimeUnit: String
attr_accessor :ClusterId, :TimeSpan, :TimeUnit
def initialize(clusterid=nil, timespan=nil, timeunit=nil)
@ClusterId = clusterid
@TimeSpan = timespan
@TimeUnit = timeunit
end
def deserialize(params)
@ClusterId = params['ClusterId']
@TimeSpan = params['TimeSpan']
@TimeUnit = params['TimeUnit']
end
end
# InquirePriceRenew返回参数结构体
class InquirePriceRenewResponse < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param InstanceIds: 实例ID列表
# @type InstanceIds: Array
# @param Prices: 对应的询价结果数组
# @type Prices: Array
# @param InstanceRealTotalPrice: 续费计算节点的总价格
# @type InstanceRealTotalPrice: Integer
# @param StorageRealTotalPrice: 续费存储节点的总价格
# @type StorageRealTotalPrice: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :ClusterId, :InstanceIds, :Prices, :InstanceRealTotalPrice, :StorageRealTotalPrice, :RequestId
def initialize(clusterid=nil, instanceids=nil, prices=nil, instancerealtotalprice=nil, storagerealtotalprice=nil, requestid=nil)
@ClusterId = clusterid
@InstanceIds = instanceids
@Prices = prices
@InstanceRealTotalPrice = instancerealtotalprice
@StorageRealTotalPrice = storagerealtotalprice
@RequestId = requestid
end
def deserialize(params)
@ClusterId = params['ClusterId']
@InstanceIds = params['InstanceIds']
unless params['Prices'].nil?
@Prices = []
params['Prices'].each do |i|
tradeprice_tmp = TradePrice.new
tradeprice_tmp.deserialize(i)
@Prices << tradeprice_tmp
end
end
@InstanceRealTotalPrice = params['InstanceRealTotalPrice']
@StorageRealTotalPrice = params['StorageRealTotalPrice']
@RequestId = params['RequestId']
end
end
# 实例的审计规则详情，DescribeAuditRuleWithInstanceIds接口的出参。
class InstanceAuditRule < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID。
# @type InstanceId: String
# @param AuditRule: 是否是规则审计。true-规则审计，false-全审计。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AuditRule: Boolean
# @param AuditRuleFilters: 审计规则详情。仅当AuditRule=true时有效。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AuditRuleFilters: Array
attr_accessor :InstanceId, :AuditRule, :AuditRuleFilters
def initialize(instanceid=nil, auditrule=nil, auditrulefilters=nil)
@InstanceId = instanceid
@AuditRule = auditrule
@AuditRuleFilters = auditrulefilters
end
def deserialize(params)
@InstanceId = params['InstanceId']
@AuditRule = params['AuditRule']
unless params['AuditRuleFilters'].nil?
@AuditRuleFilters = []
params['AuditRuleFilters'].each do |i|
auditrulefilters_tmp = AuditRuleFilters.new
auditrulefilters_tmp.deserialize(i)
@AuditRuleFilters << auditrulefilters_tmp
end
end
end
end
# 实例初始化配置信息
class InstanceInitInfo < TencentCloud::Common::AbstractModel
# @param Cpu: 实例cpu
# @type Cpu: Integer
# @param Memory: 实例内存
# @type Memory: Integer
# @param InstanceType: 实例类型 rw/ro
# @type InstanceType: String
# @param InstanceCount: 实例个数,范围[1,15]
# @type InstanceCount: Integer
attr_accessor :Cpu, :Memory, :InstanceType, :InstanceCount
def initialize(cpu=nil, memory=nil, instancetype=nil, instancecount=nil)
@Cpu = cpu
@Memory = memory
@InstanceType = instancetype
@InstanceCount = instancecount
end
def deserialize(params)
@Cpu = params['Cpu']
@Memory = params['Memory']
@InstanceType = params['InstanceType']
@InstanceCount = params['InstanceCount']
end
end
# 实例可售卖规格详细信息，创建实例时Cpu/Memory确定实例规格，存储可选大小为[MinStorageSize,MaxStorageSize]
class InstanceSpec < TencentCloud::Common::AbstractModel
# @param Cpu: 实例CPU，单位：核
# @type Cpu: Integer
# @param Memory: 实例内存，单位：GB
# @type Memory: Integer
# @param MaxStorageSize: 实例最大可用存储，单位：GB
# @type MaxStorageSize: Integer
# @param MinStorageSize: 实例最小可用存储，单位：GB
# @type MinStorageSize: Integer
# @param HasStock: 是否有库存
# @type HasStock: Boolean
# @param MachineType: 机器类型
# @type MachineType: String
# @param MaxIops: 最大IOPS
# @type MaxIops: Integer
# @param MaxIoBandWidth: 最大IO带宽
# @type MaxIoBandWidth: Integer
# @param ZoneStockInfos: 地域库存信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ZoneStockInfos: Array
# @param StockCount: 库存数量
# 注意：此字段可能返回 null，表示取不到有效值。
# @type StockCount: Integer
attr_accessor :Cpu, :Memory, :MaxStorageSize, :MinStorageSize, :HasStock, :MachineType, :MaxIops, :MaxIoBandWidth, :ZoneStockInfos, :StockCount
def initialize(cpu=nil, memory=nil, maxstoragesize=nil, minstoragesize=nil, hasstock=nil, machinetype=nil, maxiops=nil, maxiobandwidth=nil, zonestockinfos=nil, stockcount=nil)
@Cpu = cpu
@Memory = memory
@MaxStorageSize = maxstoragesize
@MinStorageSize = minstoragesize
@HasStock = hasstock
@MachineType = machinetype
@MaxIops = maxiops
@MaxIoBandWidth = maxiobandwidth
@ZoneStockInfos = zonestockinfos
@StockCount = stockcount
end
def deserialize(params)
@Cpu = params['Cpu']
@Memory = params['Memory']
@MaxStorageSize = params['MaxStorageSize']
@MinStorageSize = params['MinStorageSize']
@HasStock = params['HasStock']
@MachineType = params['MachineType']
@MaxIops = params['MaxIops']
@MaxIoBandWidth = params['MaxIoBandWidth']
unless params['ZoneStockInfos'].nil?
@ZoneStockInfos = []
params['ZoneStockInfos'].each do |i|
zonestockinfo_tmp = ZoneStockInfo.new
zonestockinfo_tmp.deserialize(i)
@ZoneStockInfos << zonestockinfo_tmp
end
end
@StockCount = params['StockCount']
end
end
# IsolateCluster请求参数结构体
class IsolateClusterRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param DbType: 该参数已废用
# @type DbType: String
attr_accessor :ClusterId, :DbType
def initialize(clusterid=nil, dbtype=nil)
@ClusterId = clusterid
@DbType = dbtype
end
def deserialize(params)
@ClusterId = params['ClusterId']
@DbType = params['DbType']
end
end
# IsolateCluster返回参数结构体
class IsolateClusterResponse < TencentCloud::Common::AbstractModel
# @param FlowId: 任务流ID
# 注意：此字段可能返回 null，表示取不到有效值。
# @type FlowId: Integer
# @param DealNames: 退款订单号
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DealNames: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :FlowId, :DealNames, :RequestId
def initialize(flowid=nil, dealnames=nil, requestid=nil)
@FlowId = flowid
@DealNames = dealnames
@RequestId = requestid
end
def deserialize(params)
@FlowId = params['FlowId']
@DealNames = params['DealNames']
@RequestId = params['RequestId']
end
end
# IsolateInstance请求参数结构体
class IsolateInstanceRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param InstanceIdList: 实例ID数组
# @type InstanceIdList: Array
# @param DbType: 该参数已废弃
# @type DbType: String
attr_accessor :ClusterId, :InstanceIdList, :DbType
def initialize(clusterid=nil, instanceidlist=nil, dbtype=nil)
@ClusterId = clusterid
@InstanceIdList = instanceidlist
@DbType = dbtype
end
def deserialize(params)
@ClusterId = params['ClusterId']
@InstanceIdList = params['InstanceIdList']
@DbType = params['DbType']
end
end
# IsolateInstance返回参数结构体
class IsolateInstanceResponse < TencentCloud::Common::AbstractModel
# @param FlowId: 任务流id
# @type FlowId: Integer
# @param DealNames: 隔离实例的订单id（预付费实例）
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DealNames: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :FlowId, :DealNames, :RequestId
def initialize(flowid=nil, dealnames=nil, requestid=nil)
@FlowId = flowid
@DealNames = dealnames
@RequestId = requestid
end
def deserialize(params)
@FlowId = params['FlowId']
@DealNames = params['DealNames']
@RequestId = params['RequestId']
end
end
# 参数是否可修改的详细信息
class ModifiableInfo < TencentCloud::Common::AbstractModel
def initialize()
end
def deserialize(params)
end
end
# ModifyAccountParams请求参数结构体
class ModifyAccountParamsRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群id，不超过32个字符
# @type ClusterId: String
# @param Account: 账号信息
# @type Account: :class:`Tencentcloud::Cynosdb.v20190107.models.InputAccount`
# @param AccountParams: 数据库表权限数组,当前仅支持参数：max_user_connections，max_user_connections不能大于10240
# @type AccountParams: Array
attr_accessor :ClusterId, :Account, :AccountParams
def initialize(clusterid=nil, account=nil, accountparams=nil)
@ClusterId = clusterid
@Account = account
@AccountParams = accountparams
end
def deserialize(params)
@ClusterId = params['ClusterId']
unless params['Account'].nil?
@Account = InputAccount.new
@Account.deserialize(params['Account'])
end
unless params['AccountParams'].nil?
@AccountParams = []
params['AccountParams'].each do |i|
accountparam_tmp = AccountParam.new
accountparam_tmp.deserialize(i)
@AccountParams << accountparam_tmp
end
end
end
end
# ModifyAccountParams返回参数结构体
class ModifyAccountParamsResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyAuditRuleTemplates请求参数结构体
class ModifyAuditRuleTemplatesRequest < TencentCloud::Common::AbstractModel
# @param RuleTemplateIds: 审计规则模版ID。
# @type RuleTemplateIds: Array
# @param RuleFilters: 修改后的审计规则。
# @type RuleFilters: Array
# @param RuleTemplateName: 修改后的规则模版名称。
# @type RuleTemplateName: String
# @param Description: 修改后的规则模版描述。
# @type Description: String
attr_accessor :RuleTemplateIds, :RuleFilters, :RuleTemplateName, :Description
def initialize(ruletemplateids=nil, rulefilters=nil, ruletemplatename=nil, description=nil)
@RuleTemplateIds = ruletemplateids
@RuleFilters = rulefilters
@RuleTemplateName = ruletemplatename
@Description = description
end
def deserialize(params)
@RuleTemplateIds = params['RuleTemplateIds']
unless params['RuleFilters'].nil?
@RuleFilters = []
params['RuleFilters'].each do |i|
rulefilters_tmp = RuleFilters.new
rulefilters_tmp.deserialize(i)
@RuleFilters << rulefilters_tmp
end
end
@RuleTemplateName = params['RuleTemplateName']
@Description = params['Description']
end
end
# ModifyAuditRuleTemplates返回参数结构体
class ModifyAuditRuleTemplatesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyAuditService请求参数结构体
class ModifyAuditServiceRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID。
# @type InstanceId: String
# @param LogExpireDay: 日志保留时长。
# @type LogExpireDay: Integer
# @param HighLogExpireDay: 高频日志保留时长。
# @type HighLogExpireDay: Integer
# @param AuditAll: 修改实例审计规则为全审计。
# @type AuditAll: Boolean
# @param AuditRuleFilters: 规则审计。
# @type AuditRuleFilters: Array
# @param RuleTemplateIds: 规则模版ID。
# @type RuleTemplateIds: Array
attr_accessor :InstanceId, :LogExpireDay, :HighLogExpireDay, :AuditAll, :AuditRuleFilters, :RuleTemplateIds
def initialize(instanceid=nil, logexpireday=nil, highlogexpireday=nil, auditall=nil, auditrulefilters=nil, ruletemplateids=nil)
@InstanceId = instanceid
@LogExpireDay = logexpireday
@HighLogExpireDay = highlogexpireday
@AuditAll = auditall
@AuditRuleFilters = auditrulefilters
@RuleTemplateIds = ruletemplateids
end
def deserialize(params)
@InstanceId = params['InstanceId']
@LogExpireDay = params['LogExpireDay']
@HighLogExpireDay = params['HighLogExpireDay']
@AuditAll = params['AuditAll']
unless params['AuditRuleFilters'].nil?
@AuditRuleFilters = []
params['AuditRuleFilters'].each do |i|
auditrulefilters_tmp = AuditRuleFilters.new
auditrulefilters_tmp.deserialize(i)
@AuditRuleFilters << auditrulefilters_tmp
end
end
@RuleTemplateIds = params['RuleTemplateIds']
end
end
# ModifyAuditService返回参数结构体
class ModifyAuditServiceResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyBackupConfig请求参数结构体
class ModifyBackupConfigRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param ReserveDuration: 表示保留备份时长, 单位秒，超过该时间将被清理, 七天表示为3600*24*7=604800，最大为158112000
# @type ReserveDuration: Integer
# @param BackupTimeBeg: 表示全备开始时间，[0-24*3600]， 如0:00, 1:00, 2:00 分别为 0，3600， 7200
# @type BackupTimeBeg: Integer
# @param BackupTimeEnd: 表示全备结束时间，[0-24*3600]， 如0:00, 1:00, 2:00 分别为 0，3600， 7200
# @type BackupTimeEnd: Integer
# @param BackupFreq: 该参数目前不支持修改，无需填写。备份频率，长度为7的数组，分别对应周一到周日的备份方式，full-全量备份，increment-增量备份
# @type BackupFreq: Array
# @param BackupType: 该参数目前不支持修改，无需填写。备份方式，logic-逻辑备份，snapshot-快照备份
# @type BackupType: String
attr_accessor :ClusterId, :ReserveDuration, :BackupTimeBeg, :BackupTimeEnd, :BackupFreq, :BackupType
def initialize(clusterid=nil, reserveduration=nil, backuptimebeg=nil, backuptimeend=nil, backupfreq=nil, backuptype=nil)
@ClusterId = clusterid
@ReserveDuration = reserveduration
@BackupTimeBeg = backuptimebeg
@BackupTimeEnd = backuptimeend
@BackupFreq = backupfreq
@BackupType = backuptype
end
def deserialize(params)
@ClusterId = params['ClusterId']
@ReserveDuration = params['ReserveDuration']
@BackupTimeBeg = params['BackupTimeBeg']
@BackupTimeEnd = params['BackupTimeEnd']
@BackupFreq = params['BackupFreq']
@BackupType = params['BackupType']
end
end
# ModifyBackupConfig返回参数结构体
class ModifyBackupConfigResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyBackupName请求参数结构体
class ModifyBackupNameRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param BackupId: 备份文件ID
# @type BackupId: Integer
# @param BackupName: 备注名，长度不能超过60个字符
# @type BackupName: String
attr_accessor :ClusterId, :BackupId, :BackupName
def initialize(clusterid=nil, backupid=nil, backupname=nil)
@ClusterId = clusterid
@BackupId = backupid
@BackupName = backupname
end
def deserialize(params)
@ClusterId = params['ClusterId']
@BackupId = params['BackupId']
@BackupName = params['BackupName']
end
end
# ModifyBackupName返回参数结构体
class ModifyBackupNameResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyClusterName请求参数结构体
class ModifyClusterNameRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param ClusterName: 集群名
# @type ClusterName: String
attr_accessor :ClusterId, :ClusterName
def initialize(clusterid=nil, clustername=nil)
@ClusterId = clusterid
@ClusterName = clustername
end
def deserialize(params)
@ClusterId = params['ClusterId']
@ClusterName = params['ClusterName']
end
end
# ModifyClusterName返回参数结构体
class ModifyClusterNameResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyClusterParam请求参数结构体
class ModifyClusterParamRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param ParamList: 要修改的参数列表。每一个元素是ParamName、CurrentValue和OldValue的组合。ParamName是参数名称，CurrentValue是当前值，OldValue是之前值且不做校验
# @type ParamList: Array
# @param IsInMaintainPeriod: 维护期间执行-yes,立即执行-no
# @type IsInMaintainPeriod: String
attr_accessor :ClusterId, :ParamList, :IsInMaintainPeriod
def initialize(clusterid=nil, paramlist=nil, isinmaintainperiod=nil)
@ClusterId = clusterid
@ParamList = paramlist
@IsInMaintainPeriod = isinmaintainperiod
end
def deserialize(params)
@ClusterId = params['ClusterId']
unless params['ParamList'].nil?
@ParamList = []
params['ParamList'].each do |i|
paramitem_tmp = ParamItem.new
paramitem_tmp.deserialize(i)
@ParamList << paramitem_tmp
end
end
@IsInMaintainPeriod = params['IsInMaintainPeriod']
end
end
# ModifyClusterParam返回参数结构体
class ModifyClusterParamResponse < TencentCloud::Common::AbstractModel
# @param AsyncRequestId: 异步请求Id，用于查询结果
# @type AsyncRequestId: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :AsyncRequestId, :RequestId
def initialize(asyncrequestid=nil, requestid=nil)
@AsyncRequestId = asyncrequestid
@RequestId = requestid
end
def deserialize(params)
@AsyncRequestId = params['AsyncRequestId']
@RequestId = params['RequestId']
end
end
# ModifyClusterSlaveZone请求参数结构体
class ModifyClusterSlaveZoneRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群Id
# @type ClusterId: String
# @param OldSlaveZone: 旧从可用区
# @type OldSlaveZone: String
# @param NewSlaveZone: 新从可用区
# @type NewSlaveZone: String
attr_accessor :ClusterId, :OldSlaveZone, :NewSlaveZone
def initialize(clusterid=nil, oldslavezone=nil, newslavezone=nil)
@ClusterId = clusterid
@OldSlaveZone = oldslavezone
@NewSlaveZone = newslavezone
end
def deserialize(params)
@ClusterId = params['ClusterId']
@OldSlaveZone = params['OldSlaveZone']
@NewSlaveZone = params['NewSlaveZone']
end
end
# ModifyClusterSlaveZone返回参数结构体
class ModifyClusterSlaveZoneResponse < TencentCloud::Common::AbstractModel
# @param FlowId: 异步FlowId
# @type FlowId: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :FlowId, :RequestId
def initialize(flowid=nil, requestid=nil)
@FlowId = flowid
@RequestId = requestid
end
def deserialize(params)
@FlowId = params['FlowId']
@RequestId = params['RequestId']
end
end
# ModifyClusterStorage请求参数结构体
class ModifyClusterStorageRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param NewStorageLimit: 集群新存储大小（单位G）
# @type NewStorageLimit: Integer
# @param OldStorageLimit: 集群原存储大小（单位G）
# @type OldStorageLimit: Integer
# @param DealMode: 交易模式 0-下单并支付 1-下单
# @type DealMode: Integer
attr_accessor :ClusterId, :NewStorageLimit, :OldStorageLimit, :DealMode
def initialize(clusterid=nil, newstoragelimit=nil, oldstoragelimit=nil, dealmode=nil)
@ClusterId = clusterid
@NewStorageLimit = newstoragelimit
@OldStorageLimit = oldstoragelimit
@DealMode = dealmode
end
def deserialize(params)
@ClusterId = params['ClusterId']
@NewStorageLimit = params['NewStorageLimit']
@OldStorageLimit = params['OldStorageLimit']
@DealMode = params['DealMode']
end
end
# ModifyClusterStorage返回参数结构体
class ModifyClusterStorageResponse < TencentCloud::Common::AbstractModel
# @param TranId: 冻结流水ID
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TranId: String
# @param BigDealIds: 大订单号
# 注意：此字段可能返回 null，表示取不到有效值。
# @type BigDealIds: Array
# @param DealNames: 订单号
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DealNames: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TranId, :BigDealIds, :DealNames, :RequestId
def initialize(tranid=nil, bigdealids=nil, dealnames=nil, requestid=nil)
@TranId = tranid
@BigDealIds = bigdealids
@DealNames = dealnames
@RequestId = requestid
end
def deserialize(params)
@TranId = params['TranId']
@BigDealIds = params['BigDealIds']
@DealNames = params['DealNames']
@RequestId = params['RequestId']
end
end
# ModifyDBInstanceSecurityGroups请求参数结构体
class ModifyDBInstanceSecurityGroupsRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例组ID
# @type InstanceId: String
# @param SecurityGroupIds: 要修改的安全组ID列表，一个或者多个安全组ID组成的数组。
# @type SecurityGroupIds: Array
# @param Zone: 可用区
# @type Zone: String
attr_accessor :InstanceId, :SecurityGroupIds, :Zone
def initialize(instanceid=nil, securitygroupids=nil, zone=nil)
@InstanceId = instanceid
@SecurityGroupIds = securitygroupids
@Zone = zone
end
def deserialize(params)
@InstanceId = params['InstanceId']
@SecurityGroupIds = params['SecurityGroupIds']
@Zone = params['Zone']
end
end
# ModifyDBInstanceSecurityGroups返回参数结构体
class ModifyDBInstanceSecurityGroupsResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyInstanceName请求参数结构体
class ModifyInstanceNameRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param InstanceName: 实例名称
# @type InstanceName: String
attr_accessor :InstanceId, :InstanceName
def initialize(instanceid=nil, instancename=nil)
@InstanceId = instanceid
@InstanceName = instancename
end
def deserialize(params)
@InstanceId = params['InstanceId']
@InstanceName = params['InstanceName']
end
end
# ModifyInstanceName返回参数结构体
class ModifyInstanceNameResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyMaintainPeriodConfig请求参数结构体
class ModifyMaintainPeriodConfigRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param MaintainStartTime: 维护开始时间，单位为秒，如3:00为10800
# @type MaintainStartTime: Integer
# @param MaintainDuration: 维护持续时间，单位为秒，如1小时为3600
# @type MaintainDuration: Integer
# @param MaintainWeekDays: 每周维护日期，日期取值范围[Mon, Tue, Wed, Thu, Fri, Sat, Sun]
# @type MaintainWeekDays: Array
attr_accessor :InstanceId, :MaintainStartTime, :MaintainDuration, :MaintainWeekDays
def initialize(instanceid=nil, maintainstarttime=nil, maintainduration=nil, maintainweekdays=nil)
@InstanceId = instanceid
@MaintainStartTime = maintainstarttime
@MaintainDuration = maintainduration
@MaintainWeekDays = maintainweekdays
end
def deserialize(params)
@InstanceId = params['InstanceId']
@MaintainStartTime = params['MaintainStartTime']
@MaintainDuration = params['MaintainDuration']
@MaintainWeekDays = params['MaintainWeekDays']
end
end
# ModifyMaintainPeriodConfig返回参数结构体
class ModifyMaintainPeriodConfigResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# 修改的实例参数信息
class ModifyParamItem < TencentCloud::Common::AbstractModel
# @param ParamName: 参数名
# @type ParamName: String
# @param CurrentValue: 参数当前值
# @type CurrentValue: String
# @param OldValue: 参数旧值（只在出参时有用）
# 注意：此字段可能返回 null，表示取不到有效值。
# @type OldValue: String
attr_accessor :ParamName, :CurrentValue, :OldValue
def initialize(paramname=nil, currentvalue=nil, oldvalue=nil)
@ParamName = paramname
@CurrentValue = currentvalue
@OldValue = oldvalue
end
def deserialize(params)
@ParamName = params['ParamName']
@CurrentValue = params['CurrentValue']
@OldValue = params['OldValue']
end
end
# ModifyVipVport请求参数结构体
class ModifyVipVportRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群id
# @type ClusterId: String
# @param InstanceGrpId: 实例组id
# @type InstanceGrpId: String
# @param Vip: 需要修改的目的ip
# @type Vip: String
# @param Vport: 需要修改的目的端口
# @type Vport: Integer
# @param DbType: 数据库类型，取值范围:
# <li> MYSQL </li>
# @type DbType: String
# @param OldIpReserveHours: 旧ip回收前的保留时间，单位小时，0表示立即回收
# @type OldIpReserveHours: Integer
attr_accessor :ClusterId, :InstanceGrpId, :Vip, :Vport, :DbType, :OldIpReserveHours
def initialize(clusterid=nil, instancegrpid=nil, vip=nil, vport=nil, dbtype=nil, oldipreservehours=nil)
@ClusterId = clusterid
@InstanceGrpId = instancegrpid
@Vip = vip
@Vport = vport
@DbType = dbtype
@OldIpReserveHours = oldipreservehours
end
def deserialize(params)
@ClusterId = params['ClusterId']
@InstanceGrpId = params['InstanceGrpId']
@Vip = params['Vip']
@Vport = params['Vport']
@DbType = params['DbType']
@OldIpReserveHours = params['OldIpReserveHours']
end
end
# ModifyVipVport返回参数结构体
class ModifyVipVportResponse < TencentCloud::Common::AbstractModel
# @param FlowId: 异步任务id
# @type FlowId: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :FlowId, :RequestId
def initialize(flowid=nil, requestid=nil)
@FlowId = flowid
@RequestId = requestid
end
def deserialize(params)
@FlowId = params['FlowId']
@RequestId = params['RequestId']
end
end
# 系统支持的模块
class Module < TencentCloud::Common::AbstractModel
# @param IsDisable: 是否支持，可选值:yes,no
# @type IsDisable: String
# @param ModuleName: 模块名
# @type ModuleName: String
attr_accessor :IsDisable, :ModuleName
def initialize(isdisable=nil, modulename=nil)
@IsDisable = isdisable
@ModuleName = modulename
end
def deserialize(params)
@IsDisable = params['IsDisable']
@ModuleName = params['ModuleName']
end
end
# 网络信息
class NetAddr < TencentCloud::Common::AbstractModel
# @param Vip: 内网ip
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Vip: String
# @param Vport: 内网端口号
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Vport: Integer
# @param WanDomain: 外网域名
# 注意：此字段可能返回 null，表示取不到有效值。
# @type WanDomain: String
# @param WanPort: 外网端口号
# 注意：此字段可能返回 null，表示取不到有效值。
# @type WanPort: Integer
# @param NetType: 网络类型（ro-只读,rw/ha-读写）
# 注意：此字段可能返回 null，表示取不到有效值。
# @type NetType: String
# @param UniqSubnetId: 子网ID
# 注意：此字段可能返回 null，表示取不到有效值。
# @type UniqSubnetId: String
# @param UniqVpcId: 私有网络ID
# 注意：此字段可能返回 null，表示取不到有效值。
# @type UniqVpcId: String
# @param Description: 描述信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Description: String
# @param WanIP: 外网IP
# 注意：此字段可能返回 null，表示取不到有效值。
# @type WanIP: String
# @param WanStatus: 外网状态
# 注意：此字段可能返回 null，表示取不到有效值。
# @type WanStatus: String
attr_accessor :Vip, :Vport, :WanDomain, :WanPort, :NetType, :UniqSubnetId, :UniqVpcId, :Description, :WanIP, :WanStatus
def initialize(vip=nil, vport=nil, wandomain=nil, wanport=nil, nettype=nil, uniqsubnetid=nil, uniqvpcid=nil, description=nil, wanip=nil, wanstatus=nil)
@Vip = vip
@Vport = vport
@WanDomain = wandomain
@WanPort = wanport
@NetType = nettype
@UniqSubnetId = uniqsubnetid
@UniqVpcId = uniqvpcid
@Description = description
@WanIP = wanip
@WanStatus = wanstatus
end
def deserialize(params)
@Vip = params['Vip']
@Vport = params['Vport']
@WanDomain = params['WanDomain']
@WanPort = params['WanPort']
@NetType = params['NetType']
@UniqSubnetId = params['UniqSubnetId']
@UniqVpcId = params['UniqVpcId']
@Description = params['Description']
@WanIP = params['WanIP']
@WanStatus = params['WanStatus']
end
end
# x08新创建的账号
class NewAccount < TencentCloud::Common::AbstractModel
# @param AccountName: 账户名，包含字母数字_,以字母开头，字母或数字结尾，长度1-16
# @type AccountName: String
# @param AccountPassword: 密码，密码长度范围为8到64个字符
# @type AccountPassword: String
# @param Host: 主机
# @type Host: String
# @param Description: 描述
# @type Description: String
# @param MaxUserConnections: 用户最大连接数，不能大于10240
# @type MaxUserConnections: Integer
attr_accessor :AccountName, :AccountPassword, :Host, :Description, :MaxUserConnections
def initialize(accountname=nil, accountpassword=nil, host=nil, description=nil, maxuserconnections=nil)
@AccountName = accountname
@AccountPassword = accountpassword
@Host = host
@Description = description
@MaxUserConnections = maxuserconnections
end
def deserialize(params)
@AccountName = params['AccountName']
@AccountPassword = params['AccountPassword']
@Host = params['Host']
@Description = params['Description']
@MaxUserConnections = params['MaxUserConnections']
end
end
# 任务信息
class ObjectTask < TencentCloud::Common::AbstractModel
# @param TaskId: 任务自增ID
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TaskId: Integer
# @param TaskType: 任务类型
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TaskType: String
# @param TaskStatus: 任务状态
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TaskStatus: String
# @param ObjectId: 任务ID（集群ID|实例组ID|实例ID）
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ObjectId: String
# @param ObjectType: 任务类型
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ObjectType: String
attr_accessor :TaskId, :TaskType, :TaskStatus, :ObjectId, :ObjectType
def initialize(taskid=nil, tasktype=nil, taskstatus=nil, objectid=nil, objecttype=nil)
@TaskId = taskid
@TaskType = tasktype
@TaskStatus = taskstatus
@ObjectId = objectid
@ObjectType = objecttype
end
def deserialize(params)
@TaskId = params['TaskId']
@TaskType = params['TaskType']
@TaskStatus = params['TaskStatus']
@ObjectId = params['ObjectId']
@ObjectType = params['ObjectType']
end
end
# OfflineCluster请求参数结构体
class OfflineClusterRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
attr_accessor :ClusterId
def initialize(clusterid=nil)
@ClusterId = clusterid
end
def deserialize(params)
@ClusterId = params['ClusterId']
end
end
# OfflineCluster返回参数结构体
class OfflineClusterResponse < TencentCloud::Common::AbstractModel
# @param FlowId: 任务流ID
# @type FlowId: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :FlowId, :RequestId
def initialize(flowid=nil, requestid=nil)
@FlowId = flowid
@RequestId = requestid
end
def deserialize(params)
@FlowId = params['FlowId']
@RequestId = params['RequestId']
end
end
# OfflineInstance请求参数结构体
class OfflineInstanceRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param InstanceIdList: 实例ID数组
# @type InstanceIdList: Array
attr_accessor :ClusterId, :InstanceIdList
def initialize(clusterid=nil, instanceidlist=nil)
@ClusterId = clusterid
@InstanceIdList = instanceidlist
end
def deserialize(params)
@ClusterId = params['ClusterId']
@InstanceIdList = params['InstanceIdList']
end
end
# OfflineInstance返回参数结构体
class OfflineInstanceResponse < TencentCloud::Common::AbstractModel
# @param FlowId: 任务流ID
# @type FlowId: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :FlowId, :RequestId
def initialize(flowid=nil, requestid=nil)
@FlowId = flowid
@RequestId = requestid
end
def deserialize(params)
@FlowId = params['FlowId']
@RequestId = params['RequestId']
end
end
# 数据库地址
class OldAddrInfo < TencentCloud::Common::AbstractModel
# @param Vip: IP
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Vip: String
# @param Vport: 端口
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Vport: Integer
# @param ReturnTime: 期望执行回收时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ReturnTime: String
attr_accessor :Vip, :Vport, :ReturnTime
def initialize(vip=nil, vport=nil, returntime=nil)
@Vip = vip
@Vport = vport
@ReturnTime = returntime
end
def deserialize(params)
@Vip = params['Vip']
@Vport = params['Vport']
@ReturnTime = params['ReturnTime']
end
end
# OpenAuditService请求参数结构体
class OpenAuditServiceRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID。
# @type InstanceId: String
# @param LogExpireDay: 日志保留时长。
# @type LogExpireDay: Integer
# @param HighLogExpireDay: 高频日志保留时长。
# @type HighLogExpireDay: Integer
# @param AuditRuleFilters: 审计规则。同RuleTemplateIds都不填是全审计。
# @type AuditRuleFilters: Array
# @param RuleTemplateIds: 规则模版ID。同AuditRuleFilters都不填是全审计。
# @type RuleTemplateIds: Array
attr_accessor :InstanceId, :LogExpireDay, :HighLogExpireDay, :AuditRuleFilters, :RuleTemplateIds
def initialize(instanceid=nil, logexpireday=nil, highlogexpireday=nil, auditrulefilters=nil, ruletemplateids=nil)
@InstanceId = instanceid
@LogExpireDay = logexpireday
@HighLogExpireDay = highlogexpireday
@AuditRuleFilters = auditrulefilters
@RuleTemplateIds = ruletemplateids
end
def deserialize(params)
@InstanceId = params['InstanceId']
@LogExpireDay = params['LogExpireDay']
@HighLogExpireDay = params['HighLogExpireDay']
unless params['AuditRuleFilters'].nil?
@AuditRuleFilters = []
params['AuditRuleFilters'].each do |i|
auditrulefilters_tmp = AuditRuleFilters.new
auditrulefilters_tmp.deserialize(i)
@AuditRuleFilters << auditrulefilters_tmp
end
end
@RuleTemplateIds = params['RuleTemplateIds']
end
end
# OpenAuditService返回参数结构体
class OpenAuditServiceResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# 参数信息
class ParamInfo < TencentCloud::Common::AbstractModel
# @param CurrentValue: 当前值
# @type CurrentValue: String
# @param Default: 默认值
# @type Default: String
# @param EnumValue: 参数为enum/string/bool时，可选值列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type EnumValue: Array
# @param Max: 参数类型为float/integer时的最大值
# @type Max: String
# @param Min: 参数类型为float/integer时的最小值
# @type Min: String
# @param ParamName: 参数名称
# @type ParamName: String
# @param NeedReboot: 是否需要重启生效
# @type NeedReboot: Integer
# @param ParamType: 参数类型：integer/float/string/enum/bool
# @type ParamType: String
# @param MatchType: 匹配类型，multiVal, regex在参数类型是string时使用
# @type MatchType: String
# @param MatchValue: 匹配目标值，当multiVal时，各个key用;分割
# @type MatchValue: String
# @param Description: 参数描述
# @type Description: String
# @param IsGlobal: 是否为全局参数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IsGlobal: Integer
# @param ModifiableInfo: 参数是否可修改
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ModifiableInfo: :class:`Tencentcloud::Cynosdb.v20190107.models.ModifiableInfo`
# @param IsFunc: 是否为函数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IsFunc: Boolean
# @param Func: 函数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Func: String
attr_accessor :CurrentValue, :Default, :EnumValue, :Max, :Min, :ParamName, :NeedReboot, :ParamType, :MatchType, :MatchValue, :Description, :IsGlobal, :ModifiableInfo, :IsFunc, :Func
def initialize(currentvalue=nil, default=nil, enumvalue=nil, max=nil, min=nil, paramname=nil, needreboot=nil, paramtype=nil, matchtype=nil, matchvalue=nil, description=nil, isglobal=nil, modifiableinfo=nil, isfunc=nil, func=nil)
@CurrentValue = currentvalue
@Default = default
@EnumValue = enumvalue
@Max = max
@Min = min
@ParamName = paramname
@NeedReboot = needreboot
@ParamType = paramtype
@MatchType = matchtype
@MatchValue = matchvalue
@Description = description
@IsGlobal = isglobal
@ModifiableInfo = modifiableinfo
@IsFunc = isfunc
@Func = func
end
def deserialize(params)
@CurrentValue = params['CurrentValue']
@Default = params['Default']
@EnumValue = params['EnumValue']
@Max = params['Max']
@Min = params['Min']
@ParamName = params['ParamName']
@NeedReboot = params['NeedReboot']
@ParamType = params['ParamType']
@MatchType = params['MatchType']
@MatchValue = params['MatchValue']
@Description = params['Description']
@IsGlobal = params['IsGlobal']
unless params['ModifiableInfo'].nil?
@ModifiableInfo = ModifiableInfo.new
@ModifiableInfo.deserialize(params['ModifiableInfo'])
end
@IsFunc = params['IsFunc']
@Func = params['Func']
end
end
# 修改参数时，传入参数描述
class ParamItem < TencentCloud::Common::AbstractModel
# @param ParamName: 参数名称
# @type ParamName: String
# @param CurrentValue: 当前值
# @type CurrentValue: String
# @param OldValue: 原有值
# @type OldValue: String
attr_accessor :ParamName, :CurrentValue, :OldValue
def initialize(paramname=nil, currentvalue=nil, oldvalue=nil)
@ParamName = paramname
@CurrentValue = currentvalue
@OldValue = oldvalue
end
def deserialize(params)
@ParamName = params['ParamName']
@CurrentValue = params['CurrentValue']
@OldValue = params['OldValue']
end
end
# 参数模板信息
class ParamTemplateListInfo < TencentCloud::Common::AbstractModel
# @param Id: 参数模板ID
# @type Id: Integer
# @param TemplateName: 参数模板名称
# @type TemplateName: String
# @param TemplateDescription: 参数模板描述
# @type TemplateDescription: String
# @param EngineVersion: 引擎版本
# @type EngineVersion: String
# @param DbMode: 数据库类型，可选值：NORMAL，SERVERLESS
# @type DbMode: String
# @param ParamInfoSet: 参数模板详情
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ParamInfoSet: Array
attr_accessor :Id, :TemplateName, :TemplateDescription, :EngineVersion, :DbMode, :ParamInfoSet
def initialize(id=nil, templatename=nil, templatedescription=nil, engineversion=nil, dbmode=nil, paraminfoset=nil)
@Id = id
@TemplateName = templatename
@TemplateDescription = templatedescription
@EngineVersion = engineversion
@DbMode = dbmode
@ParamInfoSet = paraminfoset
end
def deserialize(params)
@Id = params['Id']
@TemplateName = params['TemplateName']
@TemplateDescription = params['TemplateDescription']
@EngineVersion = params['EngineVersion']
@DbMode = params['DbMode']
unless params['ParamInfoSet'].nil?
@ParamInfoSet = []
params['ParamInfoSet'].each do |i|
templateparaminfo_tmp = TemplateParamInfo.new
templateparaminfo_tmp.deserialize(i)
@ParamInfoSet << templateparaminfo_tmp
end
end
end
end
# PauseServerless请求参数结构体
class PauseServerlessRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param ForcePause: 是否强制暂停，忽略当前的用户链接 0:不强制 1:强制， 默认为1
# @type ForcePause: Integer
attr_accessor :ClusterId, :ForcePause
def initialize(clusterid=nil, forcepause=nil)
@ClusterId = clusterid
@ForcePause = forcepause
end
def deserialize(params)
@ClusterId = params['ClusterId']
@ForcePause = params['ForcePause']
end
end
# PauseServerless返回参数结构体
class PauseServerlessResponse < TencentCloud::Common::AbstractModel
# @param FlowId: 异步流程ID
# @type FlowId: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :FlowId, :RequestId
def initialize(flowid=nil, requestid=nil)
@FlowId = flowid
@RequestId = requestid
end
def deserialize(params)
@FlowId = params['FlowId']
@RequestId = params['RequestId']
end
end
# 安全组规则
class PolicyRule < TencentCloud::Common::AbstractModel
# @param Action: 策略，ACCEPT或者DROP
# @type Action: String
# @param CidrIp: 来源Ip或Ip段，例如192.168.0.0/16
# @type CidrIp: String
# @param PortRange: 端口
# @type PortRange: String
# @param IpProtocol: 网络协议，支持udp、tcp等
# @type IpProtocol: String
# @param ServiceModule: 协议端口ID或者协议端口组ID。
# @type ServiceModule: String
# @param AddressModule: IP地址ID或者ID地址组ID。
# @type AddressModule: String
# @param Id: id
# @type Id: String
# @param Desc: 描述
# @type Desc: String
attr_accessor :Action, :CidrIp, :PortRange, :IpProtocol, :ServiceModule, :AddressModule, :Id, :Desc
def initialize(action=nil, cidrip=nil, portrange=nil, ipprotocol=nil, servicemodule=nil, addressmodule=nil, id=nil, desc=nil)
@Action = action
@CidrIp = cidrip
@PortRange = portrange
@IpProtocol = ipprotocol
@ServiceModule = servicemodule
@AddressModule = addressmodule
@Id = id
@Desc = desc
end
def deserialize(params)
@Action = params['Action']
@CidrIp = params['CidrIp']
@PortRange = params['PortRange']
@IpProtocol = params['IpProtocol']
@ServiceModule = params['ServiceModule']
@AddressModule = params['AddressModule']
@Id = params['Id']
@Desc = params['Desc']
end
end
# 查询过滤器
class QueryFilter < TencentCloud::Common::AbstractModel
# @param Names: 搜索字段，目前支持："InstanceId", "ProjectId", "InstanceName", "Vip"
# @type Names: Array
# @param Values: 搜索字符串
# @type Values: Array
# @param ExactMatch: 是否精确匹配
# @type ExactMatch: Boolean
# @param Name: 搜索字段
# @type Name: String
# @param Operator: 操作符
# @type Operator: String
attr_accessor :Names, :Values, :ExactMatch, :Name, :Operator
def initialize(names=nil, values=nil, exactmatch=nil, name=nil, operator=nil)
@Names = names
@Values = values
@ExactMatch = exactmatch
@Name = name
@Operator = operator
end
def deserialize(params)
@Names = params['Names']
@Values = params['Values']
@ExactMatch = params['ExactMatch']
@Name = params['Name']
@Operator = params['Operator']
end
end
# RemoveClusterSlaveZone请求参数结构体
class RemoveClusterSlaveZoneRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param SlaveZone: 从可用区
# @type SlaveZone: String
attr_accessor :ClusterId, :SlaveZone
def initialize(clusterid=nil, slavezone=nil)
@ClusterId = clusterid
@SlaveZone = slavezone
end
def deserialize(params)
@ClusterId = params['ClusterId']
@SlaveZone = params['SlaveZone']
end
end
# RemoveClusterSlaveZone返回参数结构体
class RemoveClusterSlaveZoneResponse < TencentCloud::Common::AbstractModel
# @param FlowId: 异步FlowId
# @type FlowId: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :FlowId, :RequestId
def initialize(flowid=nil, requestid=nil)
@FlowId = flowid
@RequestId = requestid
end
def deserialize(params)
@FlowId = params['FlowId']
@RequestId = params['RequestId']
end
end
# ResetAccountPassword请求参数结构体
class ResetAccountPasswordRequest < TencentCloud::Common::AbstractModel
# @param AccountName: 数据库账号名
# @type AccountName: String
# @param AccountPassword: 数据库账号新密码
# @type AccountPassword: String
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param Host: 主机，不填默认为"%"
# @type Host: String
attr_accessor :AccountName, :AccountPassword, :ClusterId, :Host
def initialize(accountname=nil, accountpassword=nil, clusterid=nil, host=nil)
@AccountName = accountname
@AccountPassword = accountpassword
@ClusterId = clusterid
@Host = host
end
def deserialize(params)
@AccountName = params['AccountName']
@AccountPassword = params['AccountPassword']
@ClusterId = params['ClusterId']
@Host = params['Host']
end
end
# ResetAccountPassword返回参数结构体
class ResetAccountPasswordResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# RestartInstance请求参数结构体
class RestartInstanceRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例id
# @type InstanceId: String
attr_accessor :InstanceId
def initialize(instanceid=nil)
@InstanceId = instanceid
end
def deserialize(params)
@InstanceId = params['InstanceId']
end
end
# RestartInstance返回参数结构体
class RestartInstanceResponse < TencentCloud::Common::AbstractModel
# @param FlowId: 异步任务id
# @type FlowId: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :FlowId, :RequestId
def initialize(flowid=nil, requestid=nil)
@FlowId = flowid
@RequestId = requestid
end
def deserialize(params)
@FlowId = params['FlowId']
@RequestId = params['RequestId']
end
end
# ResumeServerless请求参数结构体
class ResumeServerlessRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
attr_accessor :ClusterId
def initialize(clusterid=nil)
@ClusterId = clusterid
end
def deserialize(params)
@ClusterId = params['ClusterId']
end
end
# ResumeServerless返回参数结构体
class ResumeServerlessResponse < TencentCloud::Common::AbstractModel
# @param FlowId: 异步流程ID
# @type FlowId: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :FlowId, :RequestId
def initialize(flowid=nil, requestid=nil)
@FlowId = flowid
@RequestId = requestid
end
def deserialize(params)
@FlowId = params['FlowId']
@RequestId = params['RequestId']
end
end
# RevokeAccountPrivileges请求参数结构体
class RevokeAccountPrivilegesRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群id
# @type ClusterId: String
# @param Account: 账号信息
# @type Account: :class:`Tencentcloud::Cynosdb.v20190107.models.InputAccount`
# @param DbTablePrivileges: 数据库表权限数组
# @type DbTablePrivileges: Array
# @param DbTables: 数据库表信息
# @type DbTables: Array
attr_accessor :ClusterId, :Account, :DbTablePrivileges, :DbTables
def initialize(clusterid=nil, account=nil, dbtableprivileges=nil, dbtables=nil)
@ClusterId = clusterid
@Account = account
@DbTablePrivileges = dbtableprivileges
@DbTables = dbtables
end
def deserialize(params)
@ClusterId = params['ClusterId']
unless params['Account'].nil?
@Account = InputAccount.new
@Account.deserialize(params['Account'])
end
@DbTablePrivileges = params['DbTablePrivileges']
unless params['DbTables'].nil?
@DbTables = []
params['DbTables'].each do |i|
dbtable_tmp = DbTable.new
dbtable_tmp.deserialize(i)
@DbTables << dbtable_tmp
end
end
end
end
# RevokeAccountPrivileges返回参数结构体
class RevokeAccountPrivilegesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# RollBackCluster请求参数结构体
class RollBackClusterRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param RollbackStrategy: 回档策略 timeRollback-按时间点回档 snapRollback-按备份文件回档
# @type RollbackStrategy: String
# @param RollbackId: 回档ID
# @type RollbackId: Integer
# @param ExpectTime: 期望回档时间
# @type ExpectTime: String
# @param ExpectTimeThresh: 期望阈值（已废弃）
# @type ExpectTimeThresh: Integer
# @param RollbackDatabases: 回档数据库列表
# @type RollbackDatabases: Array
# @param RollbackTables: 回档数据库表列表
# @type RollbackTables: Array
# @param RollbackMode: 按时间点回档模式，full: 普通; db: 快速; table: 极速 （默认是普通）
# @type RollbackMode: String
attr_accessor :ClusterId, :RollbackStrategy, :RollbackId, :ExpectTime, :ExpectTimeThresh, :RollbackDatabases, :RollbackTables, :RollbackMode
def initialize(clusterid=nil, rollbackstrategy=nil, rollbackid=nil, expecttime=nil, expecttimethresh=nil, rollbackdatabases=nil, rollbacktables=nil, rollbackmode=nil)
@ClusterId = clusterid
@RollbackStrategy = rollbackstrategy
@RollbackId = rollbackid
@ExpectTime = expecttime
@ExpectTimeThresh = expecttimethresh
@RollbackDatabases = rollbackdatabases
@RollbackTables = rollbacktables
@RollbackMode = rollbackmode
end
def deserialize(params)
@ClusterId = params['ClusterId']
@RollbackStrategy = params['RollbackStrategy']
@RollbackId = params['RollbackId']
@ExpectTime = params['ExpectTime']
@ExpectTimeThresh = params['ExpectTimeThresh']
unless params['RollbackDatabases'].nil?
@RollbackDatabases = []
params['RollbackDatabases'].each do |i|
rollbackdatabase_tmp = RollbackDatabase.new
rollbackdatabase_tmp.deserialize(i)
@RollbackDatabases << rollbackdatabase_tmp
end
end
unless params['RollbackTables'].nil?
@RollbackTables = []
params['RollbackTables'].each do |i|
rollbacktable_tmp = RollbackTable.new
rollbacktable_tmp.deserialize(i)
@RollbackTables << rollbacktable_tmp
end
end
@RollbackMode = params['RollbackMode']
end
end
# RollBackCluster返回参数结构体
class RollBackClusterResponse < TencentCloud::Common::AbstractModel
# @param FlowId: 任务流ID
# @type FlowId: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :FlowId, :RequestId
def initialize(flowid=nil, requestid=nil)
@FlowId = flowid
@RequestId = requestid
end
def deserialize(params)
@FlowId = params['FlowId']
@RequestId = params['RequestId']
end
end
# 回滚数据库信息
class RollbackDatabase < TencentCloud::Common::AbstractModel
# @param OldDatabase: 旧数据库名称
# @type OldDatabase: String
# @param NewDatabase: 新数据库名称
# @type NewDatabase: String
attr_accessor :OldDatabase, :NewDatabase
def initialize(olddatabase=nil, newdatabase=nil)
@OldDatabase = olddatabase
@NewDatabase = newdatabase
end
def deserialize(params)
@OldDatabase = params['OldDatabase']
@NewDatabase = params['NewDatabase']
end
end
# 回档数据库及表
class RollbackTable < TencentCloud::Common::AbstractModel
# @param Database: 数据库名称
# @type Database: String
# @param Tables: 数据库表
# @type Tables: Array
attr_accessor :Database, :Tables
def initialize(database=nil, tables=nil)
@Database = database
@Tables = tables
end
def deserialize(params)
@Database = params['Database']
unless params['Tables'].nil?
@Tables = []
params['Tables'].each do |i|
rollbacktableinfo_tmp = RollbackTableInfo.new
rollbacktableinfo_tmp.deserialize(i)
@Tables << rollbacktableinfo_tmp
end
end
end
end
# 回档表信息
class RollbackTableInfo < TencentCloud::Common::AbstractModel
# @param OldTable: 旧表名称
# @type OldTable: String
# @param NewTable: 新表名称
# @type NewTable: String
attr_accessor :OldTable, :NewTable
def initialize(oldtable=nil, newtable=nil)
@OldTable = oldtable
@NewTable = newtable
end
def deserialize(params)
@OldTable = params['OldTable']
@NewTable = params['NewTable']
end
end
# 可回档的时间范围
class RollbackTimeRange < TencentCloud::Common::AbstractModel
# @param TimeRangeStart: 开始时间
# @type TimeRangeStart: String
# @param TimeRangeEnd: 结束时间
# @type TimeRangeEnd: String
attr_accessor :TimeRangeStart, :TimeRangeEnd
def initialize(timerangestart=nil, timerangeend=nil)
@TimeRangeStart = timerangestart
@TimeRangeEnd = timerangeend
end
def deserialize(params)
@TimeRangeStart = params['TimeRangeStart']
@TimeRangeEnd = params['TimeRangeEnd']
end
end
# 审计规则的规则过滤条件
class RuleFilters < TencentCloud::Common::AbstractModel
# @param Type: 审计规则过滤条件的参数名称。可选值：host – 客户端 IP；user – 数据库账户；dbName – 数据库名称；sqlType-SQL类型；sql-sql语句。
# @type Type: String
# @param Compare: 审计规则过滤条件的匹配类型。可选值：INC – 包含；EXC – 不包含；EQS – 等于；NEQ – 不等于。
# @type Compare: String
# @param Value: 审计规则过滤条件的匹配值。
# @type Value: Array
attr_accessor :Type, :Compare, :Value
def initialize(type=nil, compare=nil, value=nil)
@Type = type
@Compare = compare
@Value = value
end
def deserialize(params)
@Type = params['Type']
@Compare = params['Compare']
@Value = params['Value']
end
end
# 售卖地域信息
class SaleRegion < TencentCloud::Common::AbstractModel
# @param Region: 地域英文名
# @type Region: String
# @param RegionId: 地域数字ID
# @type RegionId: Integer
# @param RegionZh: 地域中文名
# @type RegionZh: String
# @param ZoneSet: 可售卖可用区列表
# @type ZoneSet: Array
# @param DbType: 引擎类型
# @type DbType: String
# @param Modules: 地域模块支持情况
# @type Modules: Array
attr_accessor :Region, :RegionId, :RegionZh, :ZoneSet, :DbType, :Modules
def initialize(region=nil, regionid=nil, regionzh=nil, zoneset=nil, dbtype=nil, modules=nil)
@Region = region
@RegionId = regionid
@RegionZh = regionzh
@ZoneSet = zoneset
@DbType = dbtype
@Modules = modules
end
def deserialize(params)
@Region = params['Region']
@RegionId = params['RegionId']
@RegionZh = params['RegionZh']
unless params['ZoneSet'].nil?
@ZoneSet = []
params['ZoneSet'].each do |i|
salezone_tmp = SaleZone.new
salezone_tmp.deserialize(i)
@ZoneSet << salezone_tmp
end
end
@DbType = params['DbType']
unless params['Modules'].nil?
@Modules = []
params['Modules'].each do |i|
module_tmp = Module.new
module_tmp.deserialize(i)
@Modules << module_tmp
end
end
end
end
# 售卖可用区信息
class SaleZone < TencentCloud::Common::AbstractModel
# @param Zone: 可用区英文名
# @type Zone: String
# @param ZoneId: 可用区数字ID
# @type ZoneId: Integer
# @param ZoneZh: 可用区中文名
# @type ZoneZh: String
# @param IsSupportServerless: 是否支持serverless集群<br>
# 0:不支持<br>
# 1:支持
# @type IsSupportServerless: Integer
# @param IsSupportNormal: 是否支持普通集群<br>
# 0:不支持<br>
# 1:支持
# @type IsSupportNormal: Integer
# @param PhysicalZone: 物理区
# @type PhysicalZone: String
# @param HasPermission: 用户是否有可用区权限
# 注意：此字段可能返回 null，表示取不到有效值。
# @type HasPermission: Boolean
# @param IsWholeRdmaZone: 是否为全链路RDMA可用区
# @type IsWholeRdmaZone: String
attr_accessor :Zone, :ZoneId, :ZoneZh, :IsSupportServerless, :IsSupportNormal, :PhysicalZone, :HasPermission, :IsWholeRdmaZone
def initialize(zone=nil, zoneid=nil, zonezh=nil, issupportserverless=nil, issupportnormal=nil, physicalzone=nil, haspermission=nil, iswholerdmazone=nil)
@Zone = zone
@ZoneId = zoneid
@ZoneZh = zonezh
@IsSupportServerless = issupportserverless
@IsSupportNormal = issupportnormal
@PhysicalZone = physicalzone
@HasPermission = haspermission
@IsWholeRdmaZone = iswholerdmazone
end
def deserialize(params)
@Zone = params['Zone']
@ZoneId = params['ZoneId']
@ZoneZh = params['ZoneZh']
@IsSupportServerless = params['IsSupportServerless']
@IsSupportNormal = params['IsSupportNormal']
@PhysicalZone = params['PhysicalZone']
@HasPermission = params['HasPermission']
@IsWholeRdmaZone = params['IsWholeRdmaZone']
end
end
# SearchClusterDatabases请求参数结构体
class SearchClusterDatabasesRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群id
# @type ClusterId: String
# @param Database: 数据库名
# @type Database: String
# @param MatchType: 是否精确搜索。
# 0: 模糊搜索 1:精确搜索
# 默认为0
# @type MatchType: Integer
attr_accessor :ClusterId, :Database, :MatchType
def initialize(clusterid=nil, database=nil, matchtype=nil)
@ClusterId = clusterid
@Database = database
@MatchType = matchtype
end
def deserialize(params)
@ClusterId = params['ClusterId']
@Database = params['Database']
@MatchType = params['MatchType']
end
end
# SearchClusterDatabases返回参数结构体
class SearchClusterDatabasesResponse < TencentCloud::Common::AbstractModel
# @param Databases: 数据库列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Databases: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Databases, :RequestId
def initialize(databases=nil, requestid=nil)
@Databases = databases
@RequestId = requestid
end
def deserialize(params)
@Databases = params['Databases']
@RequestId = params['RequestId']
end
end
# SearchClusterTables请求参数结构体
class SearchClusterTablesRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群id
# @type ClusterId: String
# @param Database: 数据库名
# @type Database: String
# @param Table: 数据表名
# @type Table: String
# @param TableType: 数据表类型：
# view：只返回 view，
# base_table： 只返回基本表，
# all：返回 view 和表
# @type TableType: String
attr_accessor :ClusterId, :Database, :Table, :TableType
def initialize(clusterid=nil, database=nil, table=nil, tabletype=nil)
@ClusterId = clusterid
@Database = database
@Table = table
@TableType = tabletype
end
def deserialize(params)
@ClusterId = params['ClusterId']
@Database = params['Database']
@Table = params['Table']
@TableType = params['TableType']
end
end
# SearchClusterTables返回参数结构体
class SearchClusterTablesResponse < TencentCloud::Common::AbstractModel
# @param Tables: 数据表列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Tables: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Tables, :RequestId
def initialize(tables=nil, requestid=nil)
@Tables = tables
@RequestId = requestid
end
def deserialize(params)
unless params['Tables'].nil?
@Tables = []
params['Tables'].each do |i|
databasetables_tmp = DatabaseTables.new
databasetables_tmp.deserialize(i)
@Tables << databasetables_tmp
end
end
@RequestId = params['RequestId']
end
end
# 安全组详情
class SecurityGroup < TencentCloud::Common::AbstractModel
# @param ProjectId: 项目ID
# @type ProjectId: Integer
# @param CreateTime: 创建时间，时间格式：yyyy-mm-dd hh:mm:ss
# @type CreateTime: String
# @param Inbound: 入站规则
# @type Inbound: Array
# @param Outbound: 出站规则
# @type Outbound: Array
# @param SecurityGroupId: 安全组ID
# @type SecurityGroupId: String
# @param SecurityGroupName: 安全组名称
# @type SecurityGroupName: String
# @param SecurityGroupRemark: 安全组备注
# @type SecurityGroupRemark: String
attr_accessor :ProjectId, :CreateTime, :Inbound, :Outbound, :SecurityGroupId, :SecurityGroupName, :SecurityGroupRemark
def initialize(projectid=nil, createtime=nil, inbound=nil, outbound=nil, securitygroupid=nil, securitygroupname=nil, securitygroupremark=nil)
@ProjectId = projectid
@CreateTime = createtime
@Inbound = inbound
@Outbound = outbound
@SecurityGroupId = securitygroupid
@SecurityGroupName = securitygroupname
@SecurityGroupRemark = securitygroupremark
end
def deserialize(params)
@ProjectId = params['ProjectId']
@CreateTime = params['CreateTime']
unless params['Inbound'].nil?
@Inbound = []
params['Inbound'].each do |i|
policyrule_tmp = PolicyRule.new
policyrule_tmp.deserialize(i)
@Inbound << policyrule_tmp
end
end
unless params['Outbound'].nil?
@Outbound = []
params['Outbound'].each do |i|
policyrule_tmp = PolicyRule.new
policyrule_tmp.deserialize(i)
@Outbound << policyrule_tmp
end
end
@SecurityGroupId = params['SecurityGroupId']
@SecurityGroupName = params['SecurityGroupName']
@SecurityGroupRemark = params['SecurityGroupRemark']
end
end
# SetRenewFlag请求参数结构体
class SetRenewFlagRequest < TencentCloud::Common::AbstractModel
# @param ResourceIds: 需操作的实例ID
# @type ResourceIds: Array
# @param AutoRenewFlag: 自动续费标志位，续费标记 0:正常续费 1:自动续费 2:到期不续
# @type AutoRenewFlag: Integer
attr_accessor :ResourceIds, :AutoRenewFlag
def initialize(resourceids=nil, autorenewflag=nil)
@ResourceIds = resourceids
@AutoRenewFlag = autorenewflag
end
def deserialize(params)
@ResourceIds = params['ResourceIds']
@AutoRenewFlag = params['AutoRenewFlag']
end
end
# SetRenewFlag返回参数结构体
class SetRenewFlagResponse < TencentCloud::Common::AbstractModel
# @param Count: 操作成功实例数
# @type Count: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Count, :RequestId
def initialize(count=nil, requestid=nil)
@Count = count
@RequestId = requestid
end
def deserialize(params)
@Count = params['Count']
@RequestId = params['RequestId']
end
end
# 实例慢查询信息
class SlowQueriesItem < TencentCloud::Common::AbstractModel
# @param Timestamp: 执行时间戳
# @type Timestamp: Integer
# @param QueryTime: 执行时长，单位秒
# @type QueryTime: Float
# @param SqlText: sql语句
# @type SqlText: String
# @param UserHost: 客户端host
# @type UserHost: String
# @param UserName: 用户名
# @type UserName: String
# @param Database: 数据库名
# @type Database: String
# @param LockTime: 锁时长，单位秒
# @type LockTime: Float
# @param RowsExamined: 扫描行数
# @type RowsExamined: Integer
# @param RowsSent: 返回行数
# @type RowsSent: Integer
# @param SqlTemplate: sql模版
# @type SqlTemplate: String
# @param SqlMd5: sql语句md5
# @type SqlMd5: String
attr_accessor :Timestamp, :QueryTime, :SqlText, :UserHost, :UserName, :Database, :LockTime, :RowsExamined, :RowsSent, :SqlTemplate, :SqlMd5
def initialize(timestamp=nil, querytime=nil, sqltext=nil, userhost=nil, username=nil, database=nil, locktime=nil, rowsexamined=nil, rowssent=nil, sqltemplate=nil, sqlmd5=nil)
@Timestamp = timestamp
@QueryTime = querytime
@SqlText = sqltext
@UserHost = userhost
@UserName = username
@Database = database
@LockTime = locktime
@RowsExamined = rowsexamined
@RowsSent = rowssent
@SqlTemplate = sqltemplate
@SqlMd5 = sqlmd5
end
def deserialize(params)
@Timestamp = params['Timestamp']
@QueryTime = params['QueryTime']
@SqlText = params['SqlText']
@UserHost = params['UserHost']
@UserName = params['UserName']
@Database = params['Database']
@LockTime = params['LockTime']
@RowsExamined = params['RowsExamined']
@RowsSent = params['RowsSent']
@SqlTemplate = params['SqlTemplate']
@SqlMd5 = params['SqlMd5']
end
end
# SwitchClusterVpc请求参数结构体
class SwitchClusterVpcRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param UniqVpcId: 字符串vpc id
# @type UniqVpcId: String
# @param UniqSubnetId: 字符串子网id
# @type UniqSubnetId: String
# @param OldIpReserveHours: 旧地址回收时间
# @type OldIpReserveHours: Integer
attr_accessor :ClusterId, :UniqVpcId, :UniqSubnetId, :OldIpReserveHours
def initialize(clusterid=nil, uniqvpcid=nil, uniqsubnetid=nil, oldipreservehours=nil)
@ClusterId = clusterid
@UniqVpcId = uniqvpcid
@UniqSubnetId = uniqsubnetid
@OldIpReserveHours = oldipreservehours
end
def deserialize(params)
@ClusterId = params['ClusterId']
@UniqVpcId = params['UniqVpcId']
@UniqSubnetId = params['UniqSubnetId']
@OldIpReserveHours = params['OldIpReserveHours']
end
end
# SwitchClusterVpc返回参数结构体
class SwitchClusterVpcResponse < TencentCloud::Common::AbstractModel
# @param FlowId: 异步任务id。
# @type FlowId: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :FlowId, :RequestId
def initialize(flowid=nil, requestid=nil)
@FlowId = flowid
@RequestId = requestid
end
def deserialize(params)
@FlowId = params['FlowId']
@RequestId = params['RequestId']
end
end
# SwitchClusterZone请求参数结构体
class SwitchClusterZoneRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群Id
# @type ClusterId: String
# @param OldZone: 当前可用区
# @type OldZone: String
# @param NewZone: 要切换到的可用区
# @type NewZone: String
# @param IsInMaintainPeriod: 维护期间执行-yes,立即执行-no
# @type IsInMaintainPeriod: String
attr_accessor :ClusterId, :OldZone, :NewZone, :IsInMaintainPeriod
def initialize(clusterid=nil, oldzone=nil, newzone=nil, isinmaintainperiod=nil)
@ClusterId = clusterid
@OldZone = oldzone
@NewZone = newzone
@IsInMaintainPeriod = isinmaintainperiod
end
def deserialize(params)
@ClusterId = params['ClusterId']
@OldZone = params['OldZone']
@NewZone = params['NewZone']
@IsInMaintainPeriod = params['IsInMaintainPeriod']
end
end
# SwitchClusterZone返回参数结构体
class SwitchClusterZoneResponse < TencentCloud::Common::AbstractModel
# @param FlowId: 异步FlowId
# @type FlowId: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :FlowId, :RequestId
def initialize(flowid=nil, requestid=nil)
@FlowId = flowid
@RequestId = requestid
end
def deserialize(params)
@FlowId = params['FlowId']
@RequestId = params['RequestId']
end
end
# SwitchProxyVpc请求参数结构体
class SwitchProxyVpcRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param UniqVpcId: 字符串vpc id
# @type UniqVpcId: String
# @param UniqSubnetId: 字符串子网id
# @type UniqSubnetId: String
# @param OldIpReserveHours: 旧地址回收时间
# @type OldIpReserveHours: Integer
# @param ProxyGroupId: 数据库代理组Id（该参数为必填项，可以通过DescribeProxies接口获得）
# @type ProxyGroupId: String
attr_accessor :ClusterId, :UniqVpcId, :UniqSubnetId, :OldIpReserveHours, :ProxyGroupId
def initialize(clusterid=nil, uniqvpcid=nil, uniqsubnetid=nil, oldipreservehours=nil, proxygroupid=nil)
@ClusterId = clusterid
@UniqVpcId = uniqvpcid
@UniqSubnetId = uniqsubnetid
@OldIpReserveHours = oldipreservehours
@ProxyGroupId = proxygroupid
end
def deserialize(params)
@ClusterId = params['ClusterId']
@UniqVpcId = params['UniqVpcId']
@UniqSubnetId = params['UniqSubnetId']
@OldIpReserveHours = params['OldIpReserveHours']
@ProxyGroupId = params['ProxyGroupId']
end
end
# SwitchProxyVpc返回参数结构体
class SwitchProxyVpcResponse < TencentCloud::Common::AbstractModel
# @param FlowId: 异步任务id。
# @type FlowId: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :FlowId, :RequestId
def initialize(flowid=nil, requestid=nil)
@FlowId = flowid
@RequestId = requestid
end
def deserialize(params)
@FlowId = params['FlowId']
@RequestId = params['RequestId']
end
end
# mysql表权限
class TablePrivileges < TencentCloud::Common::AbstractModel
# @param Db: 数据库名
# @type Db: String
# @param TableName: 表名
# @type TableName: String
# @param Privileges: 权限列表
# @type Privileges: Array
attr_accessor :Db, :TableName, :Privileges
def initialize(db=nil, tablename=nil, privileges=nil)
@Db = db
@TableName = tablename
@Privileges = privileges
end
def deserialize(params)
@Db = params['Db']
@TableName = params['TableName']
@Privileges = params['Privileges']
end
end
# 集群绑定的标签信息，包含标签键TagKey和标签值TagValue
class Tag < TencentCloud::Common::AbstractModel
# @param TagKey: 标签键
# @type TagKey: String
# @param TagValue: 标签值
# @type TagValue: String
attr_accessor :TagKey, :TagValue
def initialize(tagkey=nil, tagvalue=nil)
@TagKey = tagkey
@TagValue = tagvalue
end
def deserialize(params)
@TagKey = params['TagKey']
@TagValue = params['TagValue']
end
end
# 参数模板详情
class TemplateParamInfo < TencentCloud::Common::AbstractModel
# @param CurrentValue: 当前值
# @type CurrentValue: String
# @param Default: 默认值
# @type Default: String
# @param EnumValue: 参数类型为enum时可选的值类型集合
# 注意：此字段可能返回 null，表示取不到有效值。
# @type EnumValue: Array
# @param Max: 参数类型为float/integer时的最大值
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Max: String
# @param Min: 参数类型为float/integer时的最小值
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Min: String
# @param ParamName: 参数名称
# @type ParamName: String
# @param NeedReboot: 是否需要重启
# @type NeedReboot: Integer
# @param Description: 参数描述
# @type Description: String
# @param ParamType: 参数类型，integer/float/string/enum
# @type ParamType: String
attr_accessor :CurrentValue, :Default, :EnumValue, :Max, :Min, :ParamName, :NeedReboot, :Description, :ParamType
def initialize(currentvalue=nil, default=nil, enumvalue=nil, max=nil, min=nil, paramname=nil, needreboot=nil, description=nil, paramtype=nil)
@CurrentValue = currentvalue
@Default = default
@EnumValue = enumvalue
@Max = max
@Min = min
@ParamName = paramname
@NeedReboot = needreboot
@Description = description
@ParamType = paramtype
end
def deserialize(params)
@CurrentValue = params['CurrentValue']
@Default = params['Default']
@EnumValue = params['EnumValue']
@Max = params['Max']
@Min = params['Min']
@ParamName = params['ParamName']
@NeedReboot = params['NeedReboot']
@Description = params['Description']
@ParamType = params['ParamType']
end
end
# 计费询价结果
class TradePrice < TencentCloud::Common::AbstractModel
# @param TotalPrice: 预付费模式下资源总价，不包含优惠，单位:分
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TotalPrice: Integer
# @param Discount: 总的折扣，100表示100%不打折
# @type Discount: Float
# @param TotalPriceDiscount: 预付费模式下的优惠后总价, 单位: 分,例如用户享有折扣 =TotalPrice × Discount
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TotalPriceDiscount: Integer
# @param UnitPrice: 后付费模式下的单位资源价格，不包含优惠，单位:分
# 注意：此字段可能返回 null，表示取不到有效值。
# @type UnitPrice: Integer
# @param UnitPriceDiscount: 优惠后后付费模式下的单位资源价格, 单位: 分,例如用户享有折扣=UnitPricet × Discount
# 注意：此字段可能返回 null，表示取不到有效值。
# @type UnitPriceDiscount: Integer
# @param ChargeUnit: 计费价格单位
# @type ChargeUnit: String
attr_accessor :TotalPrice, :Discount, :TotalPriceDiscount, :UnitPrice, :UnitPriceDiscount, :ChargeUnit
def initialize(totalprice=nil, discount=nil, totalpricediscount=nil, unitprice=nil, unitpricediscount=nil, chargeunit=nil)
@TotalPrice = totalprice
@Discount = discount
@TotalPriceDiscount = totalpricediscount
@UnitPrice = unitprice
@UnitPriceDiscount = unitpricediscount
@ChargeUnit = chargeunit
end
def deserialize(params)
@TotalPrice = params['TotalPrice']
@Discount = params['Discount']
@TotalPriceDiscount = params['TotalPriceDiscount']
@UnitPrice = params['UnitPrice']
@UnitPriceDiscount = params['UnitPriceDiscount']
@ChargeUnit = params['ChargeUnit']
end
end
# UpgradeInstance请求参数结构体
class UpgradeInstanceRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param Cpu: 数据库CPU
# @type Cpu: Integer
# @param Memory: 数据库内存，单位GB
# @type Memory: Integer
# @param UpgradeType: 升级类型：upgradeImmediate，upgradeInMaintain
# @type UpgradeType: String
# @param StorageLimit: 该参数已废弃
# @type StorageLimit: Integer
# @param AutoVoucher: 是否自动选择代金券 1是 0否 默认为0
# @type AutoVoucher: Integer
# @param DbType: 该参数已废弃
# @type DbType: String
# @param DealMode: 交易模式 0-下单并支付 1-下单
# @type DealMode: Integer
# @param UpgradeMode: NormalUpgrade：普通变配，FastUpgrade：极速变配，若变配过程判断会造成闪断，变配流程会终止。
# @type UpgradeMode: String
attr_accessor :InstanceId, :Cpu, :Memory, :UpgradeType, :StorageLimit, :AutoVoucher, :DbType, :DealMode, :UpgradeMode
def initialize(instanceid=nil, cpu=nil, memory=nil, upgradetype=nil, storagelimit=nil, autovoucher=nil, dbtype=nil, dealmode=nil, upgrademode=nil)
@InstanceId = instanceid
@Cpu = cpu
@Memory = memory
@UpgradeType = upgradetype
@StorageLimit = storagelimit
@AutoVoucher = autovoucher
@DbType = dbtype
@DealMode = dealmode
@UpgradeMode = upgrademode
end
def deserialize(params)
@InstanceId = params['InstanceId']
@Cpu = params['Cpu']
@Memory = params['Memory']
@UpgradeType = params['UpgradeType']
@StorageLimit = params['StorageLimit']
@AutoVoucher = params['AutoVoucher']
@DbType = params['DbType']
@DealMode = params['DealMode']
@UpgradeMode = params['UpgradeMode']
end
end
# UpgradeInstance返回参数结构体
class UpgradeInstanceResponse < TencentCloud::Common::AbstractModel
# @param TranId: 冻结流水ID
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TranId: String
# @param BigDealIds: 大订单号
# 注意：此字段可能返回 null，表示取不到有效值。
# @type BigDealIds: Array
# @param DealNames: 订单号
# @type DealNames: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TranId, :BigDealIds, :DealNames, :RequestId
def initialize(tranid=nil, bigdealids=nil, dealnames=nil, requestid=nil)
@TranId = tranid
@BigDealIds = bigdealids
@DealNames = dealnames
@RequestId = requestid
end
def deserialize(params)
@TranId = params['TranId']
@BigDealIds = params['BigDealIds']
@DealNames = params['DealNames']
@RequestId = params['RequestId']
end
end
# 可用区库存信息
class ZoneStockInfo < TencentCloud::Common::AbstractModel
# @param Zone: 可用区
# @type Zone: String
# @param HasStock: 是否有库存
# @type HasStock: Boolean
# @param StockCount: 库存数量
# @type StockCount: Integer
attr_accessor :Zone, :HasStock, :StockCount
def initialize(zone=nil, hasstock=nil, stockcount=nil)
@Zone = zone
@HasStock = hasstock
@StockCount = stockcount
end
def deserialize(params)
@Zone = params['Zone']
@HasStock = params['HasStock']
@StockCount = params['StockCount']
end
end
end
end
end