STATE_DISABLED STATE_ENABLED Sets the LLDP system enable parameter. It turns on/off the LLDP feature.

Gets the LLDP system enabled parameter. It turns on/off the LLDP feature.

Sets the Transmit Interval parameter. This parameter defines the LLDP frame transmit interval in seconds.

Gets the Transmit Interval parameter. This parameter defines the LLDP frame transmit interval in seconds.

Sets the transmit hold parameter. This parameter defines a multiplier to determine TTL. ttl = tx_hold * tx_interval.

Gets the transmit hold parameter. This parameter defines a multiplier to determine TTL.

Sets the reinit delay parameter. This parameter defines the delay in seconds after which reinitialization of a disabled port will be attempted.

Gets the reinit delay parameter. This parameter defines the delay in seconds after which reinitialization of a disabled port will be attempted.

Sets the transmit delay parameter. This parameter defines the delay in seconds between LLDP successive frames transmission initiated by status change.

Gets the transmit delay parameter. This parameter defines the delay in seconds between LLDP successive frames transmission initiated by status change.

Sets the maximum neighbors per port parameter. This parameter defines the maximum neighbor counts the LLDP agent will keep.

Gets the maximum neighbors per port parameter. This parameter defines the maximum neighbor counts the LLDP agent will keep.

Sets the LLDP globals description. This is an arbitrary field which can be used for any purpose.

Gets the LLDP globals description.

Gets the version information for this interface.

Sets the LLDP system enable parameter. It turns on/off the LLDP feature.

Gets the LLDP system enabled parameter. It turns on/off the LLDP feature.

Sets the Transmit Interval parameter. This parameter defines the LLDP frame transmit interval in seconds.

Gets the Transmit Interval parameter. This parameter defines the LLDP frame transmit interval in seconds.

Sets the transmit hold parameter. This parameter defines a multiplier to determine TTL. ttl = tx_hold * tx_interval.

Gets the transmit hold parameter. This parameter defines a multiplier to determine TTL.

Sets the reinit delay parameter. This parameter defines the delay in seconds after which reinitialization of a disabled port will be attempted.

Gets the reinit delay parameter. This parameter defines the delay in seconds after which reinitialization of a disabled port will be attempted.

Sets the transmit delay parameter. This parameter defines the delay in seconds between LLDP successive frames transmission initiated by status change.

Gets the transmit delay parameter. This parameter defines the delay in seconds between LLDP successive frames transmission initiated by status change.

Sets the maximum neighbors per port parameter. This parameter defines the maximum neighbor counts the LLDP agent will keep.

Gets the maximum neighbors per port parameter. This parameter defines the maximum neighbor counts the LLDP agent will keep.

Sets the LLDP globals description. This is an arbitrary field which can be used for any purpose.

Gets the LLDP globals description.

Gets the version information for this interface.

The LLDPGlobals interface enables you to work with global attributes used to configure LLDP.