# frozen_string_literal: true # Copyright (c) 2017-2018 THL A29 Limited, a Tencent company. All Rights Reserved. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. module TencentCloud module Ms module V20180408 # 渠道合作Android加固App信息 class AndroidAppInfo < TencentCloud::Common::AbstractModel # @param AppMd5: app文件的md5算法值，需要正确传递，在线加固必输。 # 例如linux环境下执行算法命令md5sum ： # #md5sum test.apk # d40cc11e4bddd643ecdf29cde729a12b # @type AppMd5: String # @param AppSize: app的大小，非必输。 # @type AppSize: Integer # @param AppUrl: app下载链接，在线加固必输。 # @type AppUrl: String # @param AppName: app名称，非必输 # @type AppName: String # @param AppPkgName: app的包名，本次操作的包名。 # 当Android是按年收费、免费试用加固时，在线加固和输出工具要求该字段必输，且与AndroidPlan.AppPkgName值相等。 # @type AppPkgName: String # @param AppFileName: app的文件名，非必输。 # @type AppFileName: String # @param AppVersion: app版本号，非必输。 # @type AppVersion: String # @param AppType: Android app的文件类型，本次加固操作的应用类型 。 # Android在线加固和输出工具加固必输，其值需等于“apk”或“aab”，且与AndroidAppInfo.AppType值相等。 # @type AppType: String attr_accessor :AppMd5, :AppSize, :AppUrl, :AppName, :AppPkgName, :AppFileName, :AppVersion, :AppType def initialize(appmd5=nil, appsize=nil, appurl=nil, appname=nil, apppkgname=nil, appfilename=nil, appversion=nil, apptype=nil) @AppMd5 = appmd5 @AppSize = appsize @AppUrl = appurl @AppName = appname @AppPkgName = apppkgname @AppFileName = appfilename @AppVersion = appversion @AppType = apptype end def deserialize(params) @AppMd5 = params['AppMd5'] @AppSize = params['AppSize'] @AppUrl = params['AppUrl'] @AppName = params['AppName'] @AppPkgName = params['AppPkgName'] @AppFileName = params['AppFileName'] @AppVersion = params['AppVersion'] @AppType = params['AppType'] end end # 渠道合作安卓加固策略信息 class AndroidPlan < TencentCloud::Common::AbstractModel # @param PlanId: 非必输字段，PlanId 是指本次加固使用的配置策略Id，可通过载入上次配置接口获取。其值非0时，代表引用对应的策略。 # @type PlanId: Integer # @param AppPkgName: 本次操作的包名。 # 当收费模式是安卓按年收费和安卓免费试用的在线加固和输出工具加固时，要求该字段必输，且与AndroidAppInfo.AppPkgName值相等。 # @type AppPkgName: String # @param AppType: 安卓app的文件类型，本次加固操作的应用类型 。 # 安卓在线加固和输出工具加固必输，其值需等于“apk”或“aab”，且与AndroidAppInfo.AppType值相等。 # @type AppType: String # @param EncryptParam: 安卓加固必输字段。 # 加固策略，json格式字符串。 # 字段说明（0-关闭，1-开启）： # "enable"=1 #DEX整体加固; # "antiprotect"=1 #反调试; # "antirepack"=1 #防重打包、防篡改; # "dexsig"=1 #签名校验; # "antimonitor"=1 #防模拟器运行保护; # "ptrace"=1 #防动态注入、动态调试; # "so"."enable" = 1 #文件加密; # "vmp"."enable" = 1 #VMP虚拟化保护; # "respro"."assets"."enable" = 1 #assets资源文件加密 # "respro"."res"."enable" = 1 #res资源文件加密 # so文件加密： # 支持5种架构: # apk 格式: /lib/armeabi/libxxx.so,/lib/arm64-v8a/libxxx.so,/lib/armeabi-v7a/libxxx.so,/lib/x86/libxxx.so,/lib/x86_64/libxxx.so # aab格式: /base/lib/armeabi/libxxx.so,/base/lib/arm64-v8a/libxxx.so,/base/lib/armeabi-v7a/libxxx.so,/base/lib/x86/libxxx.so,/base/lib/x86_64/libxxx.so # 请列举 SO 库在 apk 文件解压后的完整有效路径，如:/lib/armeabi/libxxx.so； # 需要加固的 SO 库需确认为自研的 SO 库，不要加固第三方 SO 库，否则会增加 crash 风险 # res资源文件加密注意事项： # 请指定需要加密的文件全路径，如：res/layout/1.xml; # res资源文件加密不能加密APP图标 # res目录文件，不能加密以下后缀规则的文件".wav", ".mp2", ".mp3", ".ogg", ".aac", ".mpg",".mpeg", ".mid", ".midi", ".smf", ".jet", ".rtttl", ".imy", ".xmf", ".mp4", ".m4a", ".m4v", ".3gp",".3gpp", ".3g2", ".3gpp2", ".amr", ".awb", ".wma", ".wmv" # assets资源文件加密注意事项: # 请指定需要加密的文件全路径，如：assets/main.js；可以完整路径，也可以相对路径。 # 如果有通配符需要完整路径 ":all"或者"*"代表所有文件 # assets资源文件加密不能加密APP图标 # assets目录文件，不能加密以下后缀规则的文件".wav", ".mp2", ".mp3", ".ogg", ".aac", ".mpg",".mpeg", ".mid", ".midi", ".smf", ".jet", ".rtttl", ".imy", ".xmf", ".mp4", ".m4a", ".m4v", ".3gp",".3gpp", ".3g2", ".3gpp2", ".amr", ".awb", ".wma", ".wmv" # apk[dex+so+vmp+res+assets]加固参数示例： # ‘{ # "dex": { # "enable": 1, # "antiprotect": 1, # "antirepack": 1, # "dexsig": 1, # "antimonitor": 1, # "ptrace": 1 # }, # "so": { # "enable": 1, # "ver": "1.3.3", # "file": [ # "/lib/armeabi/libtest.so" # ] # }, # "vmp": { # "enable": 1, # "ndkpath": "/xxx/android-ndk-r10e", # "profile": "/xxx/vmpprofile.txt", # "mapping": "/xxx/mapping.txt" # }, # "respro": { # "assets": { # "enable": 1, # "file": [ # "assets/1.js", # "assets/2.jpg" # ] # }, # "res": { # "enable": 1, # "file": [ # "res/layout/1.xml", # "res/layout/2.xml" # ] # } # } # }’ # aab加固方案一 # [dex+res+assets]加固json字符串： # ‘{ # "dex": { # "enable": 1, # "antiprotect": 1, # "antimonitor": 1 # }, # "respro": { # "assets": { # "enable": 1, # "file": [ # "assets/1.js", # "assets/2.jpg" # ] # }, # "res": { # "enable": 1, # "file": [ # "res/layout/1.xml", # "res/layout/2.xml" # ] # } # } # }’ # aab加固方案二 # 单独vmp加固： # ‘{ # "vmp": { # "enable": 1, # "ndkpath": "/xxx/android-ndk-r10e", # "profile": "/xxx/vmpprofile.txt", # "mapping": "/xxx/mapping.txt", # "antiprotect": 1, # "antimonitor": 1 # } # }’ # @type EncryptParam: String attr_accessor :PlanId, :AppPkgName, :AppType, :EncryptParam def initialize(planid=nil, apppkgname=nil, apptype=nil, encryptparam=nil) @PlanId = planid @AppPkgName = apppkgname @AppType = apptype @EncryptParam = encryptparam end def deserialize(params) @PlanId = params['PlanId'] @AppPkgName = params['AppPkgName'] @AppType = params['AppType'] @EncryptParam = params['EncryptParam'] end end # 安卓加固结果 class AndroidResult < TencentCloud::Common::AbstractModel # @param ResultId: 结果Id,用于查询加固结果 # @type ResultId: String # @param OrderId: 与当前任务关联的订单id # @type OrderId: String # @param ResourceId: 与当前任务关联的资源Id # @type ResourceId: String # @param OpUin: 本次任务发起者 # @type OpUin: Integer # @param AppType: 应用类型：安卓-apk; 安卓-aab; # @type AppType: String # @param AppPkgName: 应用包名 # @type AppPkgName: String # @param BindAppPkgName: 后台资源绑定的包名 # @type BindAppPkgName: String # @param EncryptState: 加固结果 # @type EncryptState: Integer # @param EncryptStateDesc: 加固结果描述 # @type EncryptStateDesc: String # @param EncryptErrCode: 加固失败错误码 # @type EncryptErrCode: Integer # @param EncryptErrDesc: 加固失败原因 # @type EncryptErrDesc: String # @param EncryptErrRef: 加固失败解决方案 # @type EncryptErrRef: String # @param CreatTime: 任务创建时间 # @type CreatTime: String # @param StartTime: 任务开始处理时间 # @type StartTime: String # @param EndTime: 任务处理结束时间 # @type EndTime: String # @param CostTime: 加固耗时（秒单位） # @type CostTime: Integer # @param AppUrl: 在线加固-安卓应用原包下载链接 # @type AppUrl: String # @param AppMd5: 在线加固-安卓应用文件MD5算法值 # @type AppMd5: String # @param AppName: 在线加固-安卓应用应用名称 # @type AppName: String # @param AppVersion: 在线加固-安卓应用版本； # @type AppVersion: String # @param AppSize: 在线加固-安卓应用大小 # @type AppSize: Integer # @param OnlineToolVersion: 在线加固-安卓加固-腾讯云应用加固工具版本 # @type OnlineToolVersion: String # @param EncryptAppMd5: 在线加固-安卓加固，加固成功后文件md5算法值 # @type EncryptAppMd5: String # @param EncryptAppSize: 在线加固-安卓加固，加固成功后应用大小 # @type EncryptAppSize: Integer # @param EncryptPkgUrl: 在线加固-安卓加固，加固包下载链接。 # @type EncryptPkgUrl: String # @param OutputToolVersion: 输出工具-安卓加固-腾讯云输出工具版本 # @type OutputToolVersion: String # @param OutputToolSize: 输出工具-安卓加固-工具大小 # @type OutputToolSize: Integer # @param ToolOutputTime: 输出工具-安卓加固-工具输出时间 # @type ToolOutputTime: String # @param ToolExpireTime: 输出工具-安卓加固-工具到期时间 # @type ToolExpireTime: String # @param OutputToolUrl: 输出工具-安卓加固-输出工具下载链接 # @type OutputToolUrl: String # @param AndroidPlan: 本次安卓加固策略信息 # @type AndroidPlan: :class:`Tencentcloud::Ms.v20180408.models.AndroidPlan` attr_accessor :ResultId, :OrderId, :ResourceId, :OpUin, :AppType, :AppPkgName, :BindAppPkgName, :EncryptState, :EncryptStateDesc, :EncryptErrCode, :EncryptErrDesc, :EncryptErrRef, :CreatTime, :StartTime, :EndTime, :CostTime, :AppUrl, :AppMd5, :AppName, :AppVersion, :AppSize, :OnlineToolVersion, :EncryptAppMd5, :EncryptAppSize, :EncryptPkgUrl, :OutputToolVersion, :OutputToolSize, :ToolOutputTime, :ToolExpireTime, :OutputToolUrl, :AndroidPlan def initialize(resultid=nil, orderid=nil, resourceid=nil, opuin=nil, apptype=nil, apppkgname=nil, bindapppkgname=nil, encryptstate=nil, encryptstatedesc=nil, encrypterrcode=nil, encrypterrdesc=nil, encrypterrref=nil, creattime=nil, starttime=nil, endtime=nil, costtime=nil, appurl=nil, appmd5=nil, appname=nil, appversion=nil, appsize=nil, onlinetoolversion=nil, encryptappmd5=nil, encryptappsize=nil, encryptpkgurl=nil, outputtoolversion=nil, outputtoolsize=nil, tooloutputtime=nil, toolexpiretime=nil, outputtoolurl=nil, androidplan=nil) @ResultId = resultid @OrderId = orderid @ResourceId = resourceid @OpUin = opuin @AppType = apptype @AppPkgName = apppkgname @BindAppPkgName = bindapppkgname @EncryptState = encryptstate @EncryptStateDesc = encryptstatedesc @EncryptErrCode = encrypterrcode @EncryptErrDesc = encrypterrdesc @EncryptErrRef = encrypterrref @CreatTime = creattime @StartTime = starttime @EndTime = endtime @CostTime = costtime @AppUrl = appurl @AppMd5 = appmd5 @AppName = appname @AppVersion = appversion @AppSize = appsize @OnlineToolVersion = onlinetoolversion @EncryptAppMd5 = encryptappmd5 @EncryptAppSize = encryptappsize @EncryptPkgUrl = encryptpkgurl @OutputToolVersion = outputtoolversion @OutputToolSize = outputtoolsize @ToolOutputTime = tooloutputtime @ToolExpireTime = toolexpiretime @OutputToolUrl = outputtoolurl @AndroidPlan = androidplan end def deserialize(params) @ResultId = params['ResultId'] @OrderId = params['OrderId'] @ResourceId = params['ResourceId'] @OpUin = params['OpUin'] @AppType = params['AppType'] @AppPkgName = params['AppPkgName'] @BindAppPkgName = params['BindAppPkgName'] @EncryptState = params['EncryptState'] @EncryptStateDesc = params['EncryptStateDesc'] @EncryptErrCode = params['EncryptErrCode'] @EncryptErrDesc = params['EncryptErrDesc'] @EncryptErrRef = params['EncryptErrRef'] @CreatTime = params['CreatTime'] @StartTime = params['StartTime'] @EndTime = params['EndTime'] @CostTime = params['CostTime'] @AppUrl = params['AppUrl'] @AppMd5 = params['AppMd5'] @AppName = params['AppName'] @AppVersion = params['AppVersion'] @AppSize = params['AppSize'] @OnlineToolVersion = params['OnlineToolVersion'] @EncryptAppMd5 = params['EncryptAppMd5'] @EncryptAppSize = params['EncryptAppSize'] @EncryptPkgUrl = params['EncryptPkgUrl'] @OutputToolVersion = params['OutputToolVersion'] @OutputToolSize = params['OutputToolSize'] @ToolOutputTime = params['ToolOutputTime'] @ToolExpireTime = params['ToolExpireTime'] @OutputToolUrl = params['OutputToolUrl'] unless params['AndroidPlan'].nil? @AndroidPlan = AndroidPlan.new @AndroidPlan.deserialize(params['AndroidPlan']) end end end # app的详细基础信息 class AppDetailInfo < TencentCloud::Common::AbstractModel # @param AppName: app的名称 # @type AppName: String # @param AppPkgName: app的包名 # @type AppPkgName: String # @param AppVersion: app的版本号 # @type AppVersion: String # @param AppSize: app的大小 # @type AppSize: Integer # @param AppMd5: app的md5 # @type AppMd5: String # @param AppIconUrl: app的图标url # @type AppIconUrl: String # @param FileName: app的文件名称 # @type FileName: String attr_accessor :AppName, :AppPkgName, :AppVersion, :AppSize, :AppMd5, :AppIconUrl, :FileName def initialize(appname=nil, apppkgname=nil, appversion=nil, appsize=nil, appmd5=nil, appiconurl=nil, filename=nil) @AppName = appname @AppPkgName = apppkgname @AppVersion = appversion @AppSize = appsize @AppMd5 = appmd5 @AppIconUrl = appiconurl @FileName = filename end def deserialize(params) @AppName = params['AppName'] @AppPkgName = params['AppPkgName'] @AppVersion = params['AppVersion'] @AppSize = params['AppSize'] @AppMd5 = params['AppMd5'] @AppIconUrl = params['AppIconUrl'] @FileName = params['FileName'] end end # 提交的app基本信息 class AppInfo < TencentCloud::Common::AbstractModel # @param AppUrl: app的url，必须保证不用权限校验就可以下载 # @type AppUrl: String # @param AppMd5: app的md5，需要正确传递 # @type AppMd5: String # @param AppSize: app的大小 # @type AppSize: Integer # @param FileName: app的文件名 # @type FileName: String # @param AppPkgName: app的包名，需要正确的传递此字段 # @type AppPkgName: String # @param AppVersion: app的版本号 # @type AppVersion: String # @param AppIconUrl: app的图标url # @type AppIconUrl: String # @param AppName: app的名称 # @type AppName: String attr_accessor :AppUrl, :AppMd5, :AppSize, :FileName, :AppPkgName, :AppVersion, :AppIconUrl, :AppName def initialize(appurl=nil, appmd5=nil, appsize=nil, filename=nil, apppkgname=nil, appversion=nil, appiconurl=nil, appname=nil) @AppUrl = appurl @AppMd5 = appmd5 @AppSize = appsize @FileName = filename @AppPkgName = apppkgname @AppVersion = appversion @AppIconUrl = appiconurl @AppName = appname end def deserialize(params) @AppUrl = params['AppUrl'] @AppMd5 = params['AppMd5'] @AppSize = params['AppSize'] @FileName = params['FileName'] @AppPkgName = params['AppPkgName'] @AppVersion = params['AppVersion'] @AppIconUrl = params['AppIconUrl'] @AppName = params['AppName'] end end # 加固后app的信息，包含基本信息和加固信息 class AppSetInfo < TencentCloud::Common::AbstractModel # @param ItemId: 任务唯一标识 # @type ItemId: String # @param AppName: app的名称 # @type AppName: String # @param AppPkgName: app的包名 # @type AppPkgName: String # @param AppVersion: app的版本号 # @type AppVersion: String # @param AppMd5: app的md5 # @type AppMd5: String # @param AppSize: app的大小 # @type AppSize: Integer # @param ServiceEdition: 加固服务版本 # @type ServiceEdition: String # @param ShieldCode: 加固结果返回码 # @type ShieldCode: Integer # @param AppUrl: 加固后的APP下载地址 # @type AppUrl: String # @param TaskStatus: 任务状态: 1-已完成,2-处理中,3-处理出错,4-处理超时 # @type TaskStatus: Integer # @param ClientIp: 请求的客户端ip # @type ClientIp: String # @param TaskTime: 提交加固时间 # @type TaskTime: Integer # @param AppIconUrl: app的图标url # @type AppIconUrl: String # @param ShieldMd5: 加固后app的md5 # @type ShieldMd5: String # @param ShieldSize: 加固后app的大小 # @type ShieldSize: Integer attr_accessor :ItemId, :AppName, :AppPkgName, :AppVersion, :AppMd5, :AppSize, :ServiceEdition, :ShieldCode, :AppUrl, :TaskStatus, :ClientIp, :TaskTime, :AppIconUrl, :ShieldMd5, :ShieldSize def initialize(itemid=nil, appname=nil, apppkgname=nil, appversion=nil, appmd5=nil, appsize=nil, serviceedition=nil, shieldcode=nil, appurl=nil, taskstatus=nil, clientip=nil, tasktime=nil, appiconurl=nil, shieldmd5=nil, shieldsize=nil) @ItemId = itemid @AppName = appname @AppPkgName = apppkgname @AppVersion = appversion @AppMd5 = appmd5 @AppSize = appsize @ServiceEdition = serviceedition @ShieldCode = shieldcode @AppUrl = appurl @TaskStatus = taskstatus @ClientIp = clientip @TaskTime = tasktime @AppIconUrl = appiconurl @ShieldMd5 = shieldmd5 @ShieldSize = shieldsize end def deserialize(params) @ItemId = params['ItemId'] @AppName = params['AppName'] @AppPkgName = params['AppPkgName'] @AppVersion = params['AppVersion'] @AppMd5 = params['AppMd5'] @AppSize = params['AppSize'] @ServiceEdition = params['ServiceEdition'] @ShieldCode = params['ShieldCode'] @AppUrl = params['AppUrl'] @TaskStatus = params['TaskStatus'] @ClientIp = params['ClientIp'] @TaskTime = params['TaskTime'] @AppIconUrl = params['AppIconUrl'] @ShieldMd5 = params['ShieldMd5'] @ShieldSize = params['ShieldSize'] end end # 小程序加固信息 class AppletInfo < TencentCloud::Common::AbstractModel # @param AppletJsUrl: 客户JS包 # @type AppletJsUrl: String # @param AppletLevel: 小程序加固等级配置 # 1 - 开启代码混淆、代码压缩、代码反调试保护。 2 - 开启字符串编码和代码变换，代码膨胀，随机插入冗余代码，开启代码控制流平坦化，保证业务逻辑正常前提下，扁平化代码逻辑分支，破坏代码简单的线性结构。 3 - 开启代码加密，对字符串、函数、变量、属性、类、数组等结构进行加密保护，更多得代码控制流平坦化，扁平化逻辑分支。 # @type AppletLevel: Integer # @param Name: 本次加固输出产物名称，如”test.zip“,非空必须是 ”.zip“结尾 # @type Name: String attr_accessor :AppletJsUrl, :AppletLevel, :Name def initialize(appletjsurl=nil, appletlevel=nil, name=nil) @AppletJsUrl = appletjsurl @AppletLevel = appletlevel @Name = name end def deserialize(params) @AppletJsUrl = params['AppletJsUrl'] @AppletLevel = params['AppletLevel'] @Name = params['Name'] end end # 小程序加固配置 class AppletPlan < TencentCloud::Common::AbstractModel # @param PlanId: 策略Id # @type PlanId: Integer # @param AppletLevel: 1 - 开启代码混淆、代码压缩、代码反调试保护。 # 2 - 开启字符串编码和代码变换，代码膨胀，随机插入冗余代码，开启代码控制流平坦化，保证业务逻辑正常前提下，扁平化代码逻辑分支，破坏代码简单的线性结构。 # 3 - 开启代码加密，对字符串、函数、变量、属性、类、数组等结构进行加密保护，更多得代码控制流平坦化，扁平化逻辑分支。 # @type AppletLevel: Integer attr_accessor :PlanId, :AppletLevel def initialize(planid=nil, appletlevel=nil) @PlanId = planid @AppletLevel = appletlevel end def deserialize(params) @PlanId = params['PlanId'] @AppletLevel = params['AppletLevel'] end end # 渠道合作加固小程序加固结果 class AppletResult < TencentCloud::Common::AbstractModel # @param ResultId: 加固任务结果id # @type ResultId: String # @param ResourceId: 资源id # @type ResourceId: String # @param OrderId: 订单id # @type OrderId: String # @param OpUin: 操作账号 # @type OpUin: Integer # @param EncryptState: 加固结果 # @type EncryptState: Integer # @param EncryptStateDesc: 加固结果描述 # @type EncryptStateDesc: String # @param EncryptErrCode: 失败错误码 # @type EncryptErrCode: Integer # @param EncryptErrDesc: 失败原因 # @type EncryptErrDesc: String # @param EncryptErrRef: 解决方案 # @type EncryptErrRef: String # @param CreatTime: 任务创建时间 # @type CreatTime: String # @param StartTime: 任务开始处理时间 # @type StartTime: String # @param EndTime: 任务处理结束时间 # @type EndTime: String # @param CostTime: 加固耗时（秒单位） # @type CostTime: Integer # @param EncryptPkgUrl: 在线加固成功下载包 # @type EncryptPkgUrl: String # @param AppletInfo: 本次加固配置 # @type AppletInfo: :class:`Tencentcloud::Ms.v20180408.models.AppletInfo` attr_accessor :ResultId, :ResourceId, :OrderId, :OpUin, :EncryptState, :EncryptStateDesc, :EncryptErrCode, :EncryptErrDesc, :EncryptErrRef, :CreatTime, :StartTime, :EndTime, :CostTime, :EncryptPkgUrl, :AppletInfo def initialize(resultid=nil, resourceid=nil, orderid=nil, opuin=nil, encryptstate=nil, encryptstatedesc=nil, encrypterrcode=nil, encrypterrdesc=nil, encrypterrref=nil, creattime=nil, starttime=nil, endtime=nil, costtime=nil, encryptpkgurl=nil, appletinfo=nil) @ResultId = resultid @ResourceId = resourceid @OrderId = orderid @OpUin = opuin @EncryptState = encryptstate @EncryptStateDesc = encryptstatedesc @EncryptErrCode = encrypterrcode @EncryptErrDesc = encrypterrdesc @EncryptErrRef = encrypterrref @CreatTime = creattime @StartTime = starttime @EndTime = endtime @CostTime = costtime @EncryptPkgUrl = encryptpkgurl @AppletInfo = appletinfo end def deserialize(params) @ResultId = params['ResultId'] @ResourceId = params['ResourceId'] @OrderId = params['OrderId'] @OpUin = params['OpUin'] @EncryptState = params['EncryptState'] @EncryptStateDesc = params['EncryptStateDesc'] @EncryptErrCode = params['EncryptErrCode'] @EncryptErrDesc = params['EncryptErrDesc'] @EncryptErrRef = params['EncryptErrRef'] @CreatTime = params['CreatTime'] @StartTime = params['StartTime'] @EndTime = params['EndTime'] @CostTime = params['CostTime'] @EncryptPkgUrl = params['EncryptPkgUrl'] unless params['AppletInfo'].nil? @AppletInfo = AppletInfo.new @AppletInfo.deserialize(params['AppletInfo']) end end end # 用户绑定app的基本信息 class BindInfo < TencentCloud::Common::AbstractModel # @param AppIconUrl: app的icon的url # @type AppIconUrl: String # @param AppName: app的名称 # @type AppName: String # @param AppPkgName: app的包名 # @type AppPkgName: String attr_accessor :AppIconUrl, :AppName, :AppPkgName def initialize(appiconurl=nil, appname=nil, apppkgname=nil) @AppIconUrl = appiconurl @AppName = appname @AppPkgName = apppkgname end def deserialize(params) @AppIconUrl = params['AppIconUrl'] @AppName = params['AppName'] @AppPkgName = params['AppPkgName'] end end # CancelEncryptTask请求参数结构体 class CancelEncryptTaskRequest < TencentCloud::Common::AbstractModel # @param ResultId: 加固任务结果Id # @type ResultId: String attr_accessor :ResultId def initialize(resultid=nil) @ResultId = resultid end def deserialize(params) @ResultId = params['ResultId'] end end # CancelEncryptTask返回参数结构体 class CancelEncryptTaskResponse < TencentCloud::Common::AbstractModel # @param State: 1: 取消任务成功 ； -1 ：取消任务失败，原因为任务进程已结束，不能取消。 # @type State: Integer # @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :State, :RequestId def initialize(state=nil, requestid=nil) @State = state @RequestId = requestid end def deserialize(params) @State = params['State'] @RequestId = params['RequestId'] end end # CreateBindInstance请求参数结构体 class CreateBindInstanceRequest < TencentCloud::Common::AbstractModel # @param ResourceId: 资源id，全局唯一 # @type ResourceId: String # @param AppIconUrl: app的icon的url # @type AppIconUrl: String # @param AppName: app的名称 # @type AppName: String # @param AppPkgName: app的包名 # @type AppPkgName: String attr_accessor :ResourceId, :AppIconUrl, :AppName, :AppPkgName def initialize(resourceid=nil, appiconurl=nil, appname=nil, apppkgname=nil) @ResourceId = resourceid @AppIconUrl = appiconurl @AppName = appname @AppPkgName = apppkgname end def deserialize(params) @ResourceId = params['ResourceId'] @AppIconUrl = params['AppIconUrl'] @AppName = params['AppName'] @AppPkgName = params['AppPkgName'] end end # CreateBindInstance返回参数结构体 class CreateBindInstanceResponse < TencentCloud::Common::AbstractModel # @param Progress: 任务状态: 1-已完成,2-处理中,3-处理出错,4-处理超时 # @type Progress: Integer # @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Progress, :RequestId def initialize(progress=nil, requestid=nil) @Progress = progress @RequestId = requestid end def deserialize(params) @Progress = params['Progress'] @RequestId = params['RequestId'] end end # CreateCosSecKeyInstance请求参数结构体 class CreateCosSecKeyInstanceRequest < TencentCloud::Common::AbstractModel # @param CosRegion: 地域信息，例如广州：ap-guangzhou，上海：ap-shanghai，默认为广州。 # @type CosRegion: String # @param Duration: 密钥有效时间，默认为1小时。 # @type Duration: Integer attr_accessor :CosRegion, :Duration def initialize(cosregion=nil, duration=nil) @CosRegion = cosregion @Duration = duration end def deserialize(params) @CosRegion = params['CosRegion'] @Duration = params['Duration'] end end # CreateCosSecKeyInstance返回参数结构体 class CreateCosSecKeyInstanceResponse < TencentCloud::Common::AbstractModel # @param CosAppid: COS密钥对应的AppId # @type CosAppid: Integer # @param CosBucket: COS密钥对应的存储桶名 # @type CosBucket: String # @param CosRegion: 存储桶对应的地域 # @type CosRegion: String # @param ExpireTime: 密钥过期时间 # @type ExpireTime: Integer # @param CosId: 密钥ID信息 # @type CosId: String # @param CosKey: 密钥KEY信息 # @type CosKey: String # @param CosTocken: 密钥TOCKEN信息 # @type CosTocken: String # @param CosPrefix: 密钥可访问的文件前缀人。例如：CosPrefix=test/123/666，则该密钥只能操作test/123/666为前缀的文件，例如test/123/666/1.txt # @type CosPrefix: String # @param CosToken: 密钥TOCKEN信息 # @type CosToken: String # @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :CosAppid, :CosBucket, :CosRegion, :ExpireTime, :CosId, :CosKey, :CosTocken, :CosPrefix, :CosToken, :RequestId extend Gem::Deprecate deprecate :CosTocken, :none, 2023, 8 deprecate :CosTocken=, :none, 2023, 8 def initialize(cosappid=nil, cosbucket=nil, cosregion=nil, expiretime=nil, cosid=nil, coskey=nil, costocken=nil, cosprefix=nil, costoken=nil, requestid=nil) @CosAppid = cosappid @CosBucket = cosbucket @CosRegion = cosregion @ExpireTime = expiretime @CosId = cosid @CosKey = coskey @CosTocken = costocken @CosPrefix = cosprefix @CosToken = costoken @RequestId = requestid end def deserialize(params) @CosAppid = params['CosAppid'] @CosBucket = params['CosBucket'] @CosRegion = params['CosRegion'] @ExpireTime = params['ExpireTime'] @CosId = params['CosId'] @CosKey = params['CosKey'] @CosTocken = params['CosTocken'] @CosPrefix = params['CosPrefix'] @CosToken = params['CosToken'] @RequestId = params['RequestId'] end end # CreateEncryptInstance请求参数结构体 class CreateEncryptInstanceRequest < TencentCloud::Common::AbstractModel # @param PlatformType: 平台类型 1.android加固 2.ios源码混淆 3.sdk加固 4.applet小程序加固 # @type PlatformType: Integer # @param OrderType: 订单采购类型 1-免费试用 2-按年收费 3-按次收费 # @type OrderType: Integer # @param EncryptOpType: 1-在线加固、 2-输出工具加固 # @type EncryptOpType: Integer # @param ResourceId: 本次加固使用的资源id # @type ResourceId: String # @param AndroidAppInfo: 渠道合作android加固App信息 # @type AndroidAppInfo: :class:`Tencentcloud::Ms.v20180408.models.AndroidAppInfo` # @param AndroidPlan: 渠道合作android加固策略信息 # @type AndroidPlan: :class:`Tencentcloud::Ms.v20180408.models.AndroidPlan` # @param AppletInfo: 小程序加固信息 # @type AppletInfo: :class:`Tencentcloud::Ms.v20180408.models.AppletInfo` attr_accessor :PlatformType, :OrderType, :EncryptOpType, :ResourceId, :AndroidAppInfo, :AndroidPlan, :AppletInfo def initialize(platformtype=nil, ordertype=nil, encryptoptype=nil, resourceid=nil, androidappinfo=nil, androidplan=nil, appletinfo=nil) @PlatformType = platformtype @OrderType = ordertype @EncryptOpType = encryptoptype @ResourceId = resourceid @AndroidAppInfo = androidappinfo @AndroidPlan = androidplan @AppletInfo = appletinfo end def deserialize(params) @PlatformType = params['PlatformType'] @OrderType = params['OrderType'] @EncryptOpType = params['EncryptOpType'] @ResourceId = params['ResourceId'] unless params['AndroidAppInfo'].nil? @AndroidAppInfo = AndroidAppInfo.new @AndroidAppInfo.deserialize(params['AndroidAppInfo']) end unless params['AndroidPlan'].nil? @AndroidPlan = AndroidPlan.new @AndroidPlan.deserialize(params['AndroidPlan']) end unless params['AppletInfo'].nil? @AppletInfo = AppletInfo.new @AppletInfo.deserialize(params['AppletInfo']) end end end # CreateEncryptInstance返回参数结构体 class CreateEncryptInstanceResponse < TencentCloud::Common::AbstractModel # @param ResultId: 加固任务Id # @type ResultId: String # @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :ResultId, :RequestId def initialize(resultid=nil, requestid=nil) @ResultId = resultid @RequestId = requestid end def deserialize(params) @ResultId = params['ResultId'] @RequestId = params['RequestId'] end end # CreateOrderInstance请求参数结构体 class CreateOrderInstanceRequest < TencentCloud::Common::AbstractModel # @param PlatformType: 平台类型枚举值：1-android加固 ；2-ios源码混淆 ； 3-sdk加固 ； 4-applet小程序加固 # @type PlatformType: Integer # @param OrderType: 订单采购类型 1-免费试用 ；2-按年收费 ；3-按次收费 # @type OrderType: Integer # @param AppPkgNameList: 代表应用包名列表，值为单个包名（例如：“a.b.xxx”）或多个包名用逗号隔开(例如：“a.b.xxx,b.c.xxx”)。 # 当android按年收费加固或android免费试用加固时，该字段要求非空，即PlatformType=1 并且 OrderType=2时，AppPkgNameList必传值。 # @type AppPkgNameList: String attr_accessor :PlatformType, :OrderType, :AppPkgNameList def initialize(platformtype=nil, ordertype=nil, apppkgnamelist=nil) @PlatformType = platformtype @OrderType = ordertype @AppPkgNameList = apppkgnamelist end def deserialize(params) @PlatformType = params['PlatformType'] @OrderType = params['OrderType'] @AppPkgNameList = params['AppPkgNameList'] end end # CreateOrderInstance返回参数结构体 class CreateOrderInstanceResponse < TencentCloud::Common::AbstractModel # @param OrderId: 订单Id # @type OrderId: String # @param ResourceId: 与订单关联的资源id # @type ResourceId: Array # @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :OrderId, :ResourceId, :RequestId def initialize(orderid=nil, resourceid=nil, requestid=nil) @OrderId = orderid @ResourceId = resourceid @RequestId = requestid end def deserialize(params) @OrderId = params['OrderId'] @ResourceId = params['ResourceId'] @RequestId = params['RequestId'] end end # CreateResourceInstances请求参数结构体 class CreateResourceInstancesRequest < TencentCloud::Common::AbstractModel # @param Pid: 资源类型id。13624：加固专业版。 # @type Pid: Integer # @param TimeUnit: 时间单位，取值为d，m，y，分别表示天，月，年。 # @type TimeUnit: String # @param TimeSpan: 时间数量。 # @type TimeSpan: Integer # @param ResourceNum: 资源数量。 # @type ResourceNum: Integer attr_accessor :Pid, :TimeUnit, :TimeSpan, :ResourceNum def initialize(pid=nil, timeunit=nil, timespan=nil, resourcenum=nil) @Pid = pid @TimeUnit = timeunit @TimeSpan = timespan @ResourceNum = resourcenum end def deserialize(params) @Pid = params['Pid'] @TimeUnit = params['TimeUnit'] @TimeSpan = params['TimeSpan'] @ResourceNum = params['ResourceNum'] end end # CreateResourceInstances返回参数结构体 class CreateResourceInstancesResponse < TencentCloud::Common::AbstractModel # @param ResourceSet: 新创建的资源列表。 # @type ResourceSet: Array # @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :ResourceSet, :RequestId def initialize(resourceset=nil, requestid=nil) @ResourceSet = resourceset @RequestId = requestid end def deserialize(params) @ResourceSet = params['ResourceSet'] @RequestId = params['RequestId'] end end # CreateShieldInstance请求参数结构体 class CreateShieldInstanceRequest < TencentCloud::Common::AbstractModel # @param AppInfo: 待加固的应用信息 # @type AppInfo: :class:`Tencentcloud::Ms.v20180408.models.AppInfo` # @param ServiceInfo: 加固服务信息 # @type ServiceInfo: :class:`Tencentcloud::Ms.v20180408.models.ServiceInfo` attr_accessor :AppInfo, :ServiceInfo def initialize(appinfo=nil, serviceinfo=nil) @AppInfo = appinfo @ServiceInfo = serviceinfo end def deserialize(params) unless params['AppInfo'].nil? @AppInfo = AppInfo.new @AppInfo.deserialize(params['AppInfo']) end unless params['ServiceInfo'].nil? @ServiceInfo = ServiceInfo.new @ServiceInfo.deserialize(params['ServiceInfo']) end end end # CreateShieldInstance返回参数结构体 class CreateShieldInstanceResponse < TencentCloud::Common::AbstractModel # @param Progress: 任务状态: 1-已完成,2-处理中,3-处理出错,4-处理超时 # @type Progress: Integer # @param ItemId: 任务唯一标识 # @type ItemId: String # @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Progress, :ItemId, :RequestId def initialize(progress=nil, itemid=nil, requestid=nil) @Progress = progress @ItemId = itemid @RequestId = requestid end def deserialize(params) @Progress = params['Progress'] @ItemId = params['ItemId'] @RequestId = params['RequestId'] end end # CreateShieldPlanInstance请求参数结构体 class CreateShieldPlanInstanceRequest < TencentCloud::Common::AbstractModel # @param ResourceId: 资源id # @type ResourceId: String # @param PlanName: 策略名称 # @type PlanName: String # @param PlanInfo: 策略具体信息 # @type PlanInfo: :class:`Tencentcloud::Ms.v20180408.models.PlanInfo` attr_accessor :ResourceId, :PlanName, :PlanInfo def initialize(resourceid=nil, planname=nil, planinfo=nil) @ResourceId = resourceid @PlanName = planname @PlanInfo = planinfo end def deserialize(params) @ResourceId = params['ResourceId'] @PlanName = params['PlanName'] unless params['PlanInfo'].nil? @PlanInfo = PlanInfo.new @PlanInfo.deserialize(params['PlanInfo']) end end end # CreateShieldPlanInstance返回参数结构体 class CreateShieldPlanInstanceResponse < TencentCloud::Common::AbstractModel # @param PlanId: 策略id # @type PlanId: Integer # @param Progress: 任务状态: 1-已完成,2-处理中,3-处理出错,4-处理超时 # @type Progress: Integer # @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :PlanId, :Progress, :RequestId def initialize(planid=nil, progress=nil, requestid=nil) @PlanId = planid @Progress = progress @RequestId = requestid end def deserialize(params) @PlanId = params['PlanId'] @Progress = params['Progress'] @RequestId = params['RequestId'] end end # DeleteShieldInstances请求参数结构体 class DeleteShieldInstancesRequest < TencentCloud::Common::AbstractModel # @param ItemIds: 任务唯一标识ItemId的列表 # @type ItemIds: Array attr_accessor :ItemIds def initialize(itemids=nil) @ItemIds = itemids end def deserialize(params) @ItemIds = params['ItemIds'] end end # DeleteShieldInstances返回参数结构体 class DeleteShieldInstancesResponse < TencentCloud::Common::AbstractModel # @param Progress: 任务状态: 1-已完成,2-处理中,3-处理出错,4-处理超时 # @type Progress: Integer # @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Progress, :RequestId def initialize(progress=nil, requestid=nil) @Progress = progress @RequestId = requestid end def deserialize(params) @Progress = params['Progress'] @RequestId = params['RequestId'] end end # DescribeApkDetectionResult请求参数结构体 class DescribeApkDetectionResultRequest < TencentCloud::Common::AbstractModel # @param ApkUrl: 软件包的下载链接 # @type ApkUrl: String # @param ApkMd5: 软件包的md5值，具有唯一性。腾讯APK云检测服务会根据md5值来判断该包是否为库中已收集的样本，已存在，则返回检测结果，反之，需要一定时间检测该样本。 # @type ApkMd5: String attr_accessor :ApkUrl, :ApkMd5 def initialize(apkurl=nil, apkmd5=nil) @ApkUrl = apkurl @ApkMd5 = apkmd5 end def deserialize(params) @ApkUrl = params['ApkUrl'] @ApkMd5 = params['ApkMd5'] end end # DescribeApkDetectionResult返回参数结构体 class DescribeApkDetectionResultResponse < TencentCloud::Common::AbstractModel # @param Result: 响应结果，ok表示正常，error表示错误 # @type Result: String # @param Reason: Result为error错误时的原因说明 # @type Reason: String # @param ResultList: APK检测结果数组 # @type ResultList: Array # @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Result, :Reason, :ResultList, :RequestId def initialize(result=nil, reason=nil, resultlist=nil, requestid=nil) @Result = result @Reason = reason @ResultList = resultlist @RequestId = requestid end def deserialize(params) @Result = params['Result'] @Reason = params['Reason'] unless params['ResultList'].nil? @ResultList = [] params['ResultList'].each do |i| resultlistitem_tmp = ResultListItem.new resultlistitem_tmp.deserialize(i) @ResultList << resultlistitem_tmp end end @RequestId = params['RequestId'] end end # DescribeEncryptInstances请求参数结构体 class DescribeEncryptInstancesRequest < TencentCloud::Common::AbstractModel # @param PageNumber: 多记录查询时使用，页码 # @type PageNumber: Integer # @param PageSize: 多记录每页展示数量 # @type PageSize: Integer # @param OrderField: 多记录查询时排序使用 仅支持CreateTime 任务创建时间排序 # @type OrderField: String # @param OrderDirection: 升序（asc）还是降序（desc），默认：desc。 # @type OrderDirection: String # @param PlatformType: (条件过滤字段) 平台类型 1.android加固 2.ios源码混淆 3.sdk加固 4.applet小程序加固 # @type PlatformType: Integer # @param OrderType: (条件过滤字段) 订单采购类型 1-免费试用 2-按年收费 3-按次收费 # @type OrderType: Integer # @param EncryptOpType: (条件过滤字段) 1-在线加固 或 2-输出工具加固 # @type EncryptOpType: Integer # @param ResultId: (条件过滤字段) 单记录查询时使用，结果ID该字段非空时，结构会根据结果ID进行单记录查询，符合查询条件时，只返回一条记录。 # @type ResultId: String # @param OrderId: (条件过滤字段) 查询与订单Id关联的任务 # @type OrderId: String # @param ResourceId: (条件过滤字段) 查询与资源Id关联的任务 # @type ResourceId: String # @param AppType: (条件过滤字段) 应用类型：android-apk; android-aab; # @type AppType: String # @param AppPkgName: （条件过滤字段）应用的包名 # @type AppPkgName: String # @param EncryptState: 加固结果， # 0：正在排队； # 1：加固成功； # 2：加固中； # 3：加固失败； # 5：重试； # 多记录查询时，根据查询结果进行检索使用。 # @type EncryptState: Array attr_accessor :PageNumber, :PageSize, :OrderField, :OrderDirection, :PlatformType, :OrderType, :EncryptOpType, :ResultId, :OrderId, :ResourceId, :AppType, :AppPkgName, :EncryptState def initialize(pagenumber=nil, pagesize=nil, orderfield=nil, orderdirection=nil, platformtype=nil, ordertype=nil, encryptoptype=nil, resultid=nil, orderid=nil, resourceid=nil, apptype=nil, apppkgname=nil, encryptstate=nil) @PageNumber = pagenumber @PageSize = pagesize @OrderField = orderfield @OrderDirection = orderdirection @PlatformType = platformtype @OrderType = ordertype @EncryptOpType = encryptoptype @ResultId = resultid @OrderId = orderid @ResourceId = resourceid @AppType = apptype @AppPkgName = apppkgname @EncryptState = encryptstate end def deserialize(params) @PageNumber = params['PageNumber'] @PageSize = params['PageSize'] @OrderField = params['OrderField'] @OrderDirection = params['OrderDirection'] @PlatformType = params['PlatformType'] @OrderType = params['OrderType'] @EncryptOpType = params['EncryptOpType'] @ResultId = params['ResultId'] @OrderId = params['OrderId'] @ResourceId = params['ResourceId'] @AppType = params['AppType'] @AppPkgName = params['AppPkgName'] @EncryptState = params['EncryptState'] end end # DescribeEncryptInstances返回参数结构体 class DescribeEncryptInstancesResponse < TencentCloud::Common::AbstractModel # @param TotalCount: 总记录数 # @type TotalCount: Integer # @param EncryptResults: 渠道合作加固信息数组 # @type EncryptResults: Array # @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :TotalCount, :EncryptResults, :RequestId def initialize(totalcount=nil, encryptresults=nil, requestid=nil) @TotalCount = totalcount @EncryptResults = encryptresults @RequestId = requestid end def deserialize(params) @TotalCount = params['TotalCount'] unless params['EncryptResults'].nil? @EncryptResults = [] params['EncryptResults'].each do |i| encryptresults_tmp = EncryptResults.new encryptresults_tmp.deserialize(i) @EncryptResults << encryptresults_tmp end end @RequestId = params['RequestId'] end end # DescribeEncryptPlan请求参数结构体 class DescribeEncryptPlanRequest < TencentCloud::Common::AbstractModel # @param PlatformType: 平台类型 1.android加固 2.ios源码混淆 3.sdk加固 4.applet小程序加固 # @type PlatformType: Integer # @param OrderType: 订单采购类型 1-免费试用 2-按年收费 3-按次收费 # @type OrderType: Integer # @param EncryptOpType: 1-在线加固；2-输出工具 # @type EncryptOpType: Integer # @param ResourceId: 本次加固使用的资源id # @type ResourceId: String # @param AppPkgName: （条件过滤字段）加固查询时，根据包名查询 # @type AppPkgName: String # @param AppType: （条件过滤字段）加固查询时，根据应用格式查询，枚举值：“apk”、“aab” # @type AppType: String attr_accessor :PlatformType, :OrderType, :EncryptOpType, :ResourceId, :AppPkgName, :AppType def initialize(platformtype=nil, ordertype=nil, encryptoptype=nil, resourceid=nil, apppkgname=nil, apptype=nil) @PlatformType = platformtype @OrderType = ordertype @EncryptOpType = encryptoptype @ResourceId = resourceid @AppPkgName = apppkgname @AppType = apptype end def deserialize(params) @PlatformType = params['PlatformType'] @OrderType = params['OrderType'] @EncryptOpType = params['EncryptOpType'] @ResourceId = params['ResourceId'] @AppPkgName = params['AppPkgName'] @AppType = params['AppType'] end end # DescribeEncryptPlan返回参数结构体 class DescribeEncryptPlanResponse < TencentCloud::Common::AbstractModel # @param PlatformType: 平台类型整型值 # @type PlatformType: Integer # @param PlatformTypeDesc: 平台类型描述 1.android加固 2.ios源码混淆 3.sdk加固 4.applet小程序加固 # @type PlatformTypeDesc: String # @param EncryptOpType: 1- 在线加固 2-输出工具加固 # @type EncryptOpType: Integer # @param EncryptOpTypeDesc: 1- 在线加固 2-输出工具加固 # @type EncryptOpTypeDesc: String # @param OrderType: 订单收费类型枚举值 # @type OrderType: Integer # @param OrderTypeDesc: 订单收费类型描述 # @type OrderTypeDesc: String # @param ResourceId: 资源id # @type ResourceId: String # @param AndroidPlan: 上次加固策略 # 注意：此字段可能返回 null，表示取不到有效值。 # @type AndroidPlan: :class:`Tencentcloud::Ms.v20180408.models.AndroidPlan` # @param AppletPlan: 上次小程序加固策略 # 注意：此字段可能返回 null，表示取不到有效值。 # @type AppletPlan: :class:`Tencentcloud::Ms.v20180408.models.AppletPlan` # @param IOSPlan: 上次ios源码混淆加固配置 # 注意：此字段可能返回 null，表示取不到有效值。 # @type IOSPlan: :class:`Tencentcloud::Ms.v20180408.models.IOSPlan` # @param SDKPlan: 上次sdk加固配置 # 注意：此字段可能返回 null，表示取不到有效值。 # @type SDKPlan: :class:`Tencentcloud::Ms.v20180408.models.SDKPlan` # @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :PlatformType, :PlatformTypeDesc, :EncryptOpType, :EncryptOpTypeDesc, :OrderType, :OrderTypeDesc, :ResourceId, :AndroidPlan, :AppletPlan, :IOSPlan, :SDKPlan, :RequestId def initialize(platformtype=nil, platformtypedesc=nil, encryptoptype=nil, encryptoptypedesc=nil, ordertype=nil, ordertypedesc=nil, resourceid=nil, androidplan=nil, appletplan=nil, iosplan=nil, sdkplan=nil, requestid=nil) @PlatformType = platformtype @PlatformTypeDesc = platformtypedesc @EncryptOpType = encryptoptype @EncryptOpTypeDesc = encryptoptypedesc @OrderType = ordertype @OrderTypeDesc = ordertypedesc @ResourceId = resourceid @AndroidPlan = androidplan @AppletPlan = appletplan @IOSPlan = iosplan @SDKPlan = sdkplan @RequestId = requestid end def deserialize(params) @PlatformType = params['PlatformType'] @PlatformTypeDesc = params['PlatformTypeDesc'] @EncryptOpType = params['EncryptOpType'] @EncryptOpTypeDesc = params['EncryptOpTypeDesc'] @OrderType = params['OrderType'] @OrderTypeDesc = params['OrderTypeDesc'] @ResourceId = params['ResourceId'] unless params['AndroidPlan'].nil? @AndroidPlan = AndroidPlan.new @AndroidPlan.deserialize(params['AndroidPlan']) end unless params['AppletPlan'].nil? @AppletPlan = AppletPlan.new @AppletPlan.deserialize(params['AppletPlan']) end unless params['IOSPlan'].nil? @IOSPlan = IOSPlan.new @IOSPlan.deserialize(params['IOSPlan']) end unless params['SDKPlan'].nil? @SDKPlan = SDKPlan.new @SDKPlan.deserialize(params['SDKPlan']) end @RequestId = params['RequestId'] end end # DescribeOrderInstances请求参数结构体 class DescribeOrderInstancesRequest < TencentCloud::Common::AbstractModel # @param PageNumber: 页码 # @type PageNumber: Integer # @param PageSize: 每页展示数量 # @type PageSize: Integer # @param OrderField: 按某个字段排序，目前仅支持CreateTime排序。 # @type OrderField: String # @param OrderDirection: 升序（asc）还是降序（desc），默认：desc。 # @type OrderDirection: String # @param PlatformType: （条件过滤字段）平台类型 1.android加固 2.ios源码混淆 3.sdk加固 4.applet小程序加固 # @type PlatformType: Integer # @param OrderType: （条件过滤字段）订单采购类型 1-免费试用 2-按年收费 3-按次收费 # @type OrderType: Integer # @param ApprovalStatus: （条件过滤字段）订单审批状态： # @type ApprovalStatus: Integer # @param ResourceStatus: （条件过滤字段）资源状态： # @type ResourceStatus: Integer # @param OrderId: （条件过滤字段）订单ID # @type OrderId: String # @param ResourceId: （条件过滤字段）资源ID # @type ResourceId: String # @param AppPkgName: （条件过滤字段）包名，查询android加固订单时使用 # @type AppPkgName: String attr_accessor :PageNumber, :PageSize, :OrderField, :OrderDirection, :PlatformType, :OrderType, :ApprovalStatus, :ResourceStatus, :OrderId, :ResourceId, :AppPkgName def initialize(pagenumber=nil, pagesize=nil, orderfield=nil, orderdirection=nil, platformtype=nil, ordertype=nil, approvalstatus=nil, resourcestatus=nil, orderid=nil, resourceid=nil, apppkgname=nil) @PageNumber = pagenumber @PageSize = pagesize @OrderField = orderfield @OrderDirection = orderdirection @PlatformType = platformtype @OrderType = ordertype @ApprovalStatus = approvalstatus @ResourceStatus = resourcestatus @OrderId = orderid @ResourceId = resourceid @AppPkgName = apppkgname end def deserialize(params) @PageNumber = params['PageNumber'] @PageSize = params['PageSize'] @OrderField = params['OrderField'] @OrderDirection = params['OrderDirection'] @PlatformType = params['PlatformType'] @OrderType = params['OrderType'] @ApprovalStatus = params['ApprovalStatus'] @ResourceStatus = params['ResourceStatus'] @OrderId = params['OrderId'] @ResourceId = params['ResourceId'] @AppPkgName = params['AppPkgName'] end end # DescribeOrderInstances返回参数结构体 class DescribeOrderInstancesResponse < TencentCloud::Common::AbstractModel # @param TotalCount: 总记录数 # @type TotalCount: Integer # @param Orders: 订单信息 # @type Orders: Array # @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :TotalCount, :Orders, :RequestId def initialize(totalcount=nil, orders=nil, requestid=nil) @TotalCount = totalcount @Orders = orders @RequestId = requestid end def deserialize(params) @TotalCount = params['TotalCount'] unless params['Orders'].nil? @Orders = [] params['Orders'].each do |i| orders_tmp = Orders.new orders_tmp.deserialize(i) @Orders << orders_tmp end end @RequestId = params['RequestId'] end end # DescribeResourceInstances请求参数结构体 class DescribeResourceInstancesRequest < TencentCloud::Common::AbstractModel # @param Filters: 支持CreateTime、ExpireTime、AppName、AppPkgName、BindValue、IsBind过滤 # @type Filters: Array # @param Offset: 偏移量，默认为0 # @type Offset: Integer # @param Limit: 数量限制，默认为20，最大值为100。 # @type Limit: Integer # @param Pids: 资源类别id数组，13624：加固专业版，12750：企业版。空数组表示返回全部资源。 # @type Pids: Array # @param OrderField: 按某个字段排序，目前支持CreateTime、ExpireTime其中的一个排序。 # @type OrderField: String # @param OrderDirection: 升序（asc）还是降序（desc），默认：desc。 # @type OrderDirection: String attr_accessor :Filters, :Offset, :Limit, :Pids, :OrderField, :OrderDirection def initialize(filters=nil, offset=nil, limit=nil, pids=nil, orderfield=nil, orderdirection=nil) @Filters = filters @Offset = offset @Limit = limit @Pids = pids @OrderField = orderfield @OrderDirection = orderdirection end def deserialize(params) unless params['Filters'].nil? @Filters = [] params['Filters'].each do |i| filter_tmp = Filter.new filter_tmp.deserialize(i) @Filters << filter_tmp end end @Offset = params['Offset'] @Limit = params['Limit'] @Pids = params['Pids'] @OrderField = params['OrderField'] @OrderDirection = params['OrderDirection'] end end # DescribeResourceInstances返回参数结构体 class DescribeResourceInstancesResponse < TencentCloud::Common::AbstractModel # @param TotalCount: 符合要求的资源数量 # @type TotalCount: Integer # @param ResourceSet: 符合要求的资源数组 # @type ResourceSet: Array # @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :TotalCount, :ResourceSet, :RequestId def initialize(totalcount=nil, resourceset=nil, requestid=nil) @TotalCount = totalcount @ResourceSet = resourceset @RequestId = requestid end def deserialize(params) @TotalCount = params['TotalCount'] unless params['ResourceSet'].nil? @ResourceSet = [] params['ResourceSet'].each do |i| resourceinfo_tmp = ResourceInfo.new resourceinfo_tmp.deserialize(i) @ResourceSet << resourceinfo_tmp end end @RequestId = params['RequestId'] end end # DescribeShieldInstances请求参数结构体 class DescribeShieldInstancesRequest < TencentCloud::Common::AbstractModel # @param Filters: 支持通过app名称，app包名，加固的服务版本，提交的渠道进行筛选。 # @type Filters: Array # @param Offset: 偏移量，默认为0。 # @type Offset: Integer # @param Limit: 数量限制，默认为20，最大值为100。 # @type Limit: Integer # @param ItemIds: 可以提供ItemId数组来查询一个或者多个结果。注意不可以同时指定ItemIds和Filters。 # @type ItemIds: Array # @param OrderField: 按某个字段排序，目前仅支持TaskTime排序。 # @type OrderField: String # @param OrderDirection: 升序（asc）还是降序（desc），默认：desc。 # @type OrderDirection: String attr_accessor :Filters, :Offset, :Limit, :ItemIds, :OrderField, :OrderDirection def initialize(filters=nil, offset=nil, limit=nil, itemids=nil, orderfield=nil, orderdirection=nil) @Filters = filters @Offset = offset @Limit = limit @ItemIds = itemids @OrderField = orderfield @OrderDirection = orderdirection end def deserialize(params) unless params['Filters'].nil? @Filters = [] params['Filters'].each do |i| filter_tmp = Filter.new filter_tmp.deserialize(i) @Filters << filter_tmp end end @Offset = params['Offset'] @Limit = params['Limit'] @ItemIds = params['ItemIds'] @OrderField = params['OrderField'] @OrderDirection = params['OrderDirection'] end end # DescribeShieldInstances返回参数结构体 class DescribeShieldInstancesResponse < TencentCloud::Common::AbstractModel # @param TotalCount: 符合要求的app数量 # @type TotalCount: Integer # @param AppSet: 一个关于app详细信息的结构体，主要包括app的基本信息和加固信息。 # @type AppSet: Array # @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :TotalCount, :AppSet, :RequestId def initialize(totalcount=nil, appset=nil, requestid=nil) @TotalCount = totalcount @AppSet = appset @RequestId = requestid end def deserialize(params) @TotalCount = params['TotalCount'] unless params['AppSet'].nil? @AppSet = [] params['AppSet'].each do |i| appsetinfo_tmp = AppSetInfo.new appsetinfo_tmp.deserialize(i) @AppSet << appsetinfo_tmp end end @RequestId = params['RequestId'] end end # DescribeShieldPlanInstance请求参数结构体 class DescribeShieldPlanInstanceRequest < TencentCloud::Common::AbstractModel # @param ResourceId: 资源id # @type ResourceId: String # @param Pid: 服务类别id # @type Pid: Integer attr_accessor :ResourceId, :Pid def initialize(resourceid=nil, pid=nil) @ResourceId = resourceid @Pid = pid end def deserialize(params) @ResourceId = params['ResourceId'] @Pid = params['Pid'] end end # DescribeShieldPlanInstance返回参数结构体 class DescribeShieldPlanInstanceResponse < TencentCloud::Common::AbstractModel # @param BindInfo: 绑定资源信息 # @type BindInfo: :class:`Tencentcloud::Ms.v20180408.models.BindInfo` # @param ShieldPlanInfo: 加固策略信息 # @type ShieldPlanInfo: :class:`Tencentcloud::Ms.v20180408.models.ShieldPlanInfo` # @param ResourceServiceInfo: 加固资源信息 # @type ResourceServiceInfo: :class:`Tencentcloud::Ms.v20180408.models.ResourceServiceInfo` # @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :BindInfo, :ShieldPlanInfo, :ResourceServiceInfo, :RequestId def initialize(bindinfo=nil, shieldplaninfo=nil, resourceserviceinfo=nil, requestid=nil) @BindInfo = bindinfo @ShieldPlanInfo = shieldplaninfo @ResourceServiceInfo = resourceserviceinfo @RequestId = requestid end def deserialize(params) unless params['BindInfo'].nil? @BindInfo = BindInfo.new @BindInfo.deserialize(params['BindInfo']) end unless params['ShieldPlanInfo'].nil? @ShieldPlanInfo = ShieldPlanInfo.new @ShieldPlanInfo.deserialize(params['ShieldPlanInfo']) end unless params['ResourceServiceInfo'].nil? @ResourceServiceInfo = ResourceServiceInfo.new @ResourceServiceInfo.deserialize(params['ResourceServiceInfo']) end @RequestId = params['RequestId'] end end # DescribeShieldResult请求参数结构体 class DescribeShieldResultRequest < TencentCloud::Common::AbstractModel # @param ItemId: 任务唯一标识 # @type ItemId: String attr_accessor :ItemId def initialize(itemid=nil) @ItemId = itemid end def deserialize(params) @ItemId = params['ItemId'] end end # DescribeShieldResult返回参数结构体 class DescribeShieldResultResponse < TencentCloud::Common::AbstractModel # @param TaskStatus: 任务状态: 0-请返回,1-已完成,2-处理中,3-处理出错,4-处理超时 # @type TaskStatus: Integer # @param AppDetailInfo: app加固前的详细信息 # @type AppDetailInfo: :class:`Tencentcloud::Ms.v20180408.models.AppDetailInfo` # @param ShieldInfo: app加固后的详细信息 # @type ShieldInfo: :class:`Tencentcloud::Ms.v20180408.models.ShieldInfo` # @param StatusDesc: 状态描述 # @type StatusDesc: String # @param StatusRef: 状态指引 # @type StatusRef: String # @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :TaskStatus, :AppDetailInfo, :ShieldInfo, :StatusDesc, :StatusRef, :RequestId def initialize(taskstatus=nil, appdetailinfo=nil, shieldinfo=nil, statusdesc=nil, statusref=nil, requestid=nil) @TaskStatus = taskstatus @AppDetailInfo = appdetailinfo @ShieldInfo = shieldinfo @StatusDesc = statusdesc @StatusRef = statusref @RequestId = requestid end def deserialize(params) @TaskStatus = params['TaskStatus'] unless params['AppDetailInfo'].nil? @AppDetailInfo = AppDetailInfo.new @AppDetailInfo.deserialize(params['AppDetailInfo']) end unless params['ShieldInfo'].nil? @ShieldInfo = ShieldInfo.new @ShieldInfo.deserialize(params['ShieldInfo']) end @StatusDesc = params['StatusDesc'] @StatusRef = params['StatusRef'] @RequestId = params['RequestId'] end end # DescribeUrlDetectionResult请求参数结构体 class DescribeUrlDetectionResultRequest < TencentCloud::Common::AbstractModel # @param Url: 查询的网址 # @type Url: String attr_accessor :Url def initialize(url=nil) @Url = url end def deserialize(params) @Url = params['Url'] end end # DescribeUrlDetectionResult返回参数结构体 class DescribeUrlDetectionResultResponse < TencentCloud::Common::AbstractModel # @param ResultCode: [查询结果]查询结果；枚举值：0 查询成功，否则查询失败 # @type ResultCode: Integer # @param RespVer: [固定信息]响应协议版本号 # @type RespVer: Integer # @param UrlType: [查询结果]url恶意状态 # 枚举值： # 0-1：未知，访问暂无风险。 # 2 ： 风险网址，具体的恶意类型定义参考恶意大类EvilClass字段。 # 3-4：安全，访问无风险。 # 注意：查询结果EvilClass字段在Urltype=2时，才有意义。 # @type UrlType: Integer # @param EvilClass: [查询结果]url恶意类型大类:{ # "1": "社工欺诈（仿冒、账号钓鱼、中奖诈骗）", # "2": "信息诈骗（虚假充值、虚假兼职、虚假金融投资、虚假信用卡代办、网络赌博诈骗）", # "3": "虚假销售（男女保健美容减肥产品、电子产品、虚假广告、违法销售）", # "4": "恶意文件（病毒文件，木马文件，恶意apk文件的下载链接以及站点，挂马网站）", # "5": "博彩网站（博彩网站，在线赌博网站）", # "6": "色情网站（涉嫌传播色情内容，提供色情服务的网站）" # } # @type EvilClass: Integer # @param EvilType: 该字段暂为空 # @type EvilType: Integer # @param Level: 该字段暂为空 # @type Level: Integer # @param DetectTime: [查询详情]url检出时间；时间戳 # @type DetectTime: Integer # @param Wording: 该字段暂为空 # @type Wording: String # @param WordingTitle: 该字段暂为空 # @type WordingTitle: String # @param UrlTypeDesc: [查询结果]url恶意状态说明；为UrlType字段值对应的说明 # @type UrlTypeDesc: String # @param EvilClassDesc: [查询结果]url恶意大类说明；为EvilClass字段值对应的说明 # @type EvilClassDesc: String # @param EvilTypeDesc: 该字段暂为空 # @type EvilTypeDesc: String # @param LevelDesc: 该字段暂为空 # @type LevelDesc: String # @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :ResultCode, :RespVer, :UrlType, :EvilClass, :EvilType, :Level, :DetectTime, :Wording, :WordingTitle, :UrlTypeDesc, :EvilClassDesc, :EvilTypeDesc, :LevelDesc, :RequestId def initialize(resultcode=nil, respver=nil, urltype=nil, evilclass=nil, eviltype=nil, level=nil, detecttime=nil, wording=nil, wordingtitle=nil, urltypedesc=nil, evilclassdesc=nil, eviltypedesc=nil, leveldesc=nil, requestid=nil) @ResultCode = resultcode @RespVer = respver @UrlType = urltype @EvilClass = evilclass @EvilType = eviltype @Level = level @DetectTime = detecttime @Wording = wording @WordingTitle = wordingtitle @UrlTypeDesc = urltypedesc @EvilClassDesc = evilclassdesc @EvilTypeDesc = eviltypedesc @LevelDesc = leveldesc @RequestId = requestid end def deserialize(params) @ResultCode = params['ResultCode'] @RespVer = params['RespVer'] @UrlType = params['UrlType'] @EvilClass = params['EvilClass'] @EvilType = params['EvilType'] @Level = params['Level'] @DetectTime = params['DetectTime'] @Wording = params['Wording'] @WordingTitle = params['WordingTitle'] @UrlTypeDesc = params['UrlTypeDesc'] @EvilClassDesc = params['EvilClassDesc'] @EvilTypeDesc = params['EvilTypeDesc'] @LevelDesc = params['LevelDesc'] @RequestId = params['RequestId'] end end # DescribeUserBaseInfoInstance请求参数结构体 class DescribeUserBaseInfoInstanceRequest < TencentCloud::Common::AbstractModel def initialize() end def deserialize(params) end end # DescribeUserBaseInfoInstance返回参数结构体 class DescribeUserBaseInfoInstanceResponse < TencentCloud::Common::AbstractModel # @param UserUin: 用户uin信息 # @type UserUin: Integer # @param UserAppid: 用户APPID信息 # @type UserAppid: Integer # @param TimeStamp: 系统时间戳 # @type TimeStamp: Integer # @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :UserUin, :UserAppid, :TimeStamp, :RequestId def initialize(useruin=nil, userappid=nil, timestamp=nil, requestid=nil) @UserUin = useruin @UserAppid = userappid @TimeStamp = timestamp @RequestId = requestid end def deserialize(params) @UserUin = params['UserUin'] @UserAppid = params['UserAppid'] @TimeStamp = params['TimeStamp'] @RequestId = params['RequestId'] end end # 渠道合作加固结果信息 class EncryptResults < TencentCloud::Common::AbstractModel # @param PlatformType: 平台类型枚举值 1-android安卓加固 2-ios源码混淆 3-sdk加固 4-applet小程序加固 # @type PlatformType: Integer # @param PlatformDesc: 平台类型描述 1-android安卓加固 2-ios源码混淆 3-sdk加固 4-applet小程序加固 # @type PlatformDesc: String # @param OrderType: 订单采购类型枚举值， 1-免费试用 2-按年收费 3-按次收费 # @type OrderType: Integer # @param OrderTypeDesc: 订单采购类型 描述：1-免费试用 2-按年收费 3-按次收费 # @type OrderTypeDesc: String # @param EncryptOpType: 枚举值：1-在线加固 或 2-输出工具加固 # @type EncryptOpType: Integer # @param EncryptOpTypeDesc: 描述：1-在线加固 或 2-输出工具加固 # @type EncryptOpTypeDesc: String # @param ResourceId: 与当前任务关联的资源Id # @type ResourceId: String # @param OrderId: 与当前任务关联的订单Id # @type OrderId: String # @param AndroidResult: 对应PlatformType平台类型值 1-android安卓加固结果 # 注意：此字段可能返回 null，表示取不到有效值。 # @type AndroidResult: :class:`Tencentcloud::Ms.v20180408.models.AndroidResult` # @param IOSResult: 对应PlatformType平台类型值 2-ios源码混淆加固结果 # 注意：此字段可能返回 null，表示取不到有效值。 # @type IOSResult: :class:`Tencentcloud::Ms.v20180408.models.IOSResult` # @param SDKResult: 对应PlatformType平台类型值 3-sdk加固结果 # 注意：此字段可能返回 null，表示取不到有效值。 # @type SDKResult: :class:`Tencentcloud::Ms.v20180408.models.SDKResult` # @param AppletResult: 对应PlatformType平台类型值 4-applet小程序加固结果 # 注意：此字段可能返回 null，表示取不到有效值。 # @type AppletResult: :class:`Tencentcloud::Ms.v20180408.models.AppletResult` attr_accessor :PlatformType, :PlatformDesc, :OrderType, :OrderTypeDesc, :EncryptOpType, :EncryptOpTypeDesc, :ResourceId, :OrderId, :AndroidResult, :IOSResult, :SDKResult, :AppletResult def initialize(platformtype=nil, platformdesc=nil, ordertype=nil, ordertypedesc=nil, encryptoptype=nil, encryptoptypedesc=nil, resourceid=nil, orderid=nil, androidresult=nil, iosresult=nil, sdkresult=nil, appletresult=nil) @PlatformType = platformtype @PlatformDesc = platformdesc @OrderType = ordertype @OrderTypeDesc = ordertypedesc @EncryptOpType = encryptoptype @EncryptOpTypeDesc = encryptoptypedesc @ResourceId = resourceid @OrderId = orderid @AndroidResult = androidresult @IOSResult = iosresult @SDKResult = sdkresult @AppletResult = appletresult end def deserialize(params) @PlatformType = params['PlatformType'] @PlatformDesc = params['PlatformDesc'] @OrderType = params['OrderType'] @OrderTypeDesc = params['OrderTypeDesc'] @EncryptOpType = params['EncryptOpType'] @EncryptOpTypeDesc = params['EncryptOpTypeDesc'] @ResourceId = params['ResourceId'] @OrderId = params['OrderId'] unless params['AndroidResult'].nil? @AndroidResult = AndroidResult.new @AndroidResult.deserialize(params['AndroidResult']) end unless params['IOSResult'].nil? @IOSResult = IOSResult.new @IOSResult.deserialize(params['IOSResult']) end unless params['SDKResult'].nil? @SDKResult = SDKResult.new @SDKResult.deserialize(params['SDKResult']) end unless params['AppletResult'].nil? @AppletResult = AppletResult.new @AppletResult.deserialize(params['AppletResult']) end end end # 筛选数据结构 class Filter < TencentCloud::Common::AbstractModel # @param Name: 需要过滤的字段 # @type Name: String # @param Value: 需要过滤字段的值 # @type Value: String attr_accessor :Name, :Value def initialize(name=nil, value=nil) @Name = name @Value = value end def deserialize(params) @Name = params['Name'] @Value = params['Value'] end end # 渠道合作IOS源码混淆配置 class IOSPlan < TencentCloud::Common::AbstractModel # @param PlanId: 策略id # @type PlanId: Integer attr_accessor :PlanId def initialize(planid=nil) @PlanId = planid end def deserialize(params) @PlanId = params['PlanId'] end end # 渠道合作ios源码混淆加固结果 class IOSResult < TencentCloud::Common::AbstractModel # @param ResultId: 加固任务结果Id # @type ResultId: String attr_accessor :ResultId def initialize(resultid=nil) @ResultId = resultid end def deserialize(params) @ResultId = params['ResultId'] end end # APK检测服务：非广告插件结果列表(SDK、风险插件等) class OptPluginListItem < TencentCloud::Common::AbstractModel # @param PluginType: 非广告类型 # @type PluginType: String # @param PluginName: 非广告插件名称 # @type PluginName: String # @param PluginDesc: 非广告插件描述 # @type PluginDesc: String attr_accessor :PluginType, :PluginName, :PluginDesc def initialize(plugintype=nil, pluginname=nil, plugindesc=nil) @PluginType = plugintype @PluginName = pluginname @PluginDesc = plugindesc end def deserialize(params) @PluginType = params['PluginType'] @PluginName = params['PluginName'] @PluginDesc = params['PluginDesc'] end end # 渠道合作加固订单资源信息 class Orders < TencentCloud::Common::AbstractModel # @param OrderId: 订单号 # @type OrderId: String # @param PlatformType: 平台类型整型值 # @type PlatformType: Integer # @param PlatformTypeDesc: 平台类型描述： 1.android安卓加固 2.ios源码混淆 3.sdk加固 4.applet小程序加固 # @type PlatformTypeDesc: String # @param OrderType: 订单采购类型整型值 # @type OrderType: Integer # @param OrderTypeDesc: 订单采购类型描述： 1-免费试用 2-按年收费 3-按次收费 # @type OrderTypeDesc: String # @param AppPkgName: 安卓包年收费加固的包名 # @type AppPkgName: String # @param ResourceId: 资源号 # @type ResourceId: String # @param ResourceStatus: 资源状态整型值 # @type ResourceStatus: Integer # @param ResourceStatusDesc: 资源状态描述 # 0-未生效、1-生效中、2-已失效。 # @type ResourceStatusDesc: String # @param TestTimes: 订单类型为免费试用时的免费加固次数。 # @type TestTimes: Integer # @param ValidTime: 资源生效时间 # @type ValidTime: String # @param ExpireTime: 资源过期时间 # @type ExpireTime: String # @param CreateTime: 资源创建时间 # @type CreateTime: String # @param Approver: 订单审批人 # @type Approver: String # @param ApprovalStatus: 订单审批状态整型值 # @type ApprovalStatus: Integer # @param ApprovalStatusDesc: 订单审批状态整型值描述：0-未审批、1-审批通过、2-驳回。 # @type ApprovalStatusDesc: String # @param ApprovalTime: 订单审批时间 # @type ApprovalTime: String # @param TimesTaskTotalCount: 按次收费加固资源，其关联的总任务数 # @type TimesTaskTotalCount: Integer # @param TimesTaskSuccessCount: 按次收费加固资源，其关联的任务成功数 # @type TimesTaskSuccessCount: Integer # @param TimesTaskFailCount: 按次收费加固资源，其关联的任务失败数 # @type TimesTaskFailCount: Integer attr_accessor :OrderId, :PlatformType, :PlatformTypeDesc, :OrderType, :OrderTypeDesc, :AppPkgName, :ResourceId, :ResourceStatus, :ResourceStatusDesc, :TestTimes, :ValidTime, :ExpireTime, :CreateTime, :Approver, :ApprovalStatus, :ApprovalStatusDesc, :ApprovalTime, :TimesTaskTotalCount, :TimesTaskSuccessCount, :TimesTaskFailCount def initialize(orderid=nil, platformtype=nil, platformtypedesc=nil, ordertype=nil, ordertypedesc=nil, apppkgname=nil, resourceid=nil, resourcestatus=nil, resourcestatusdesc=nil, testtimes=nil, validtime=nil, expiretime=nil, createtime=nil, approver=nil, approvalstatus=nil, approvalstatusdesc=nil, approvaltime=nil, timestasktotalcount=nil, timestasksuccesscount=nil, timestaskfailcount=nil) @OrderId = orderid @PlatformType = platformtype @PlatformTypeDesc = platformtypedesc @OrderType = ordertype @OrderTypeDesc = ordertypedesc @AppPkgName = apppkgname @ResourceId = resourceid @ResourceStatus = resourcestatus @ResourceStatusDesc = resourcestatusdesc @TestTimes = testtimes @ValidTime = validtime @ExpireTime = expiretime @CreateTime = createtime @Approver = approver @ApprovalStatus = approvalstatus @ApprovalStatusDesc = approvalstatusdesc @ApprovalTime = approvaltime @TimesTaskTotalCount = timestasktotalcount @TimesTaskSuccessCount = timestasksuccesscount @TimesTaskFailCount = timestaskfailcount end def deserialize(params) @OrderId = params['OrderId'] @PlatformType = params['PlatformType'] @PlatformTypeDesc = params['PlatformTypeDesc'] @OrderType = params['OrderType'] @OrderTypeDesc = params['OrderTypeDesc'] @AppPkgName = params['AppPkgName'] @ResourceId = params['ResourceId'] @ResourceStatus = params['ResourceStatus'] @ResourceStatusDesc = params['ResourceStatusDesc'] @TestTimes = params['TestTimes'] @ValidTime = params['ValidTime'] @ExpireTime = params['ExpireTime'] @CreateTime = params['CreateTime'] @Approver = params['Approver'] @ApprovalStatus = params['ApprovalStatus'] @ApprovalStatusDesc = params['ApprovalStatusDesc'] @ApprovalTime = params['ApprovalTime'] @TimesTaskTotalCount = params['TimesTaskTotalCount'] @TimesTaskSuccessCount = params['TimesTaskSuccessCount'] @TimesTaskFailCount = params['TimesTaskFailCount'] end end # 加固策略具体信息 class PlanDetailInfo < TencentCloud::Common::AbstractModel # @param IsDefault: 默认策略，1为默认，0为非默认 # @type IsDefault: Integer # @param PlanId: 策略id # @type PlanId: Integer # @param PlanName: 策略名称 # @type PlanName: String # @param PlanInfo: 策略信息 # @type PlanInfo: :class:`Tencentcloud::Ms.v20180408.models.PlanInfo` attr_accessor :IsDefault, :PlanId, :PlanName, :PlanInfo def initialize(isdefault=nil, planid=nil, planname=nil, planinfo=nil) @IsDefault = isdefault @PlanId = planid @PlanName = planname @PlanInfo = planinfo end def deserialize(params) @IsDefault = params['IsDefault'] @PlanId = params['PlanId'] @PlanName = params['PlanName'] unless params['PlanInfo'].nil? @PlanInfo = PlanInfo.new @PlanInfo.deserialize(params['PlanInfo']) end end end # 加固策略信息 class PlanInfo < TencentCloud::Common::AbstractModel # @param ApkSizeOpt: apk大小优化，0关闭，1开启 # @type ApkSizeOpt: Integer # @param Dex: Dex加固，0关闭，1开启 # @type Dex: Integer # @param So: So加固，0关闭，1开启 # @type So: Integer # @param Bugly: 数据收集，0关闭，1开启 # @type Bugly: Integer # @param AntiRepack: 防止重打包，0关闭，1开启 # @type AntiRepack: Integer # @param SeperateDex: Dex分离，0关闭，1开启 # @type SeperateDex: Integer # @param Db: 内存保护，0关闭，1开启 # @type Db: Integer # @param DexSig: Dex签名校验，0关闭，1开启 # @type DexSig: Integer # @param SoInfo: So文件信息 # @type SoInfo: :class:`Tencentcloud::Ms.v20180408.models.SoInfo` # @param AntiVMP: vmp，0关闭，1开启 # @type AntiVMP: Integer # @param SoType: 保护so的强度， # @type SoType: Array # @param AntiLogLeak: 防日志泄漏，0关闭，1开启 # @type AntiLogLeak: Integer # @param AntiQemuRoot: root检测，0关闭，1开启 # @type AntiQemuRoot: Integer # @param AntiAssets: 资源防篡改，0关闭，1开启 # @type AntiAssets: Integer # @param AntiScreenshot: 防止截屏，0关闭，1开启 # @type AntiScreenshot: Integer # @param AntiSSL: SSL证书防窃取，0关闭，1开启 # @type AntiSSL: Integer attr_accessor :ApkSizeOpt, :Dex, :So, :Bugly, :AntiRepack, :SeperateDex, :Db, :DexSig, :SoInfo, :AntiVMP, :SoType, :AntiLogLeak, :AntiQemuRoot, :AntiAssets, :AntiScreenshot, :AntiSSL def initialize(apksizeopt=nil, dex=nil, so=nil, bugly=nil, antirepack=nil, seperatedex=nil, db=nil, dexsig=nil, soinfo=nil, antivmp=nil, sotype=nil, antilogleak=nil, antiqemuroot=nil, antiassets=nil, antiscreenshot=nil, antissl=nil) @ApkSizeOpt = apksizeopt @Dex = dex @So = so @Bugly = bugly @AntiRepack = antirepack @SeperateDex = seperatedex @Db = db @DexSig = dexsig @SoInfo = soinfo @AntiVMP = antivmp @SoType = sotype @AntiLogLeak = antilogleak @AntiQemuRoot = antiqemuroot @AntiAssets = antiassets @AntiScreenshot = antiscreenshot @AntiSSL = antissl end def deserialize(params) @ApkSizeOpt = params['ApkSizeOpt'] @Dex = params['Dex'] @So = params['So'] @Bugly = params['Bugly'] @AntiRepack = params['AntiRepack'] @SeperateDex = params['SeperateDex'] @Db = params['Db'] @DexSig = params['DexSig'] unless params['SoInfo'].nil? @SoInfo = SoInfo.new @SoInfo.deserialize(params['SoInfo']) end @AntiVMP = params['AntiVMP'] @SoType = params['SoType'] @AntiLogLeak = params['AntiLogLeak'] @AntiQemuRoot = params['AntiQemuRoot'] @AntiAssets = params['AntiAssets'] @AntiScreenshot = params['AntiScreenshot'] @AntiSSL = params['AntiSSL'] end end # APK检测服务：广告插件结果结构体 class PluginListItem < TencentCloud::Common::AbstractModel # @param PluginType: 数字类型，分别为 1-通知栏广告，2-积分墙广告，3-banner广告，4- 悬浮窗图标广告，5-精品推荐列表广告, 6-插播广告 # @type PluginType: String # @param PluginName: 广告插件名称 # @type PluginName: String # @param PluginDesc: 广告插件描述 # @type PluginDesc: String attr_accessor :PluginType, :PluginName, :PluginDesc def initialize(plugintype=nil, pluginname=nil, plugindesc=nil) @PluginType = plugintype @PluginName = pluginname @PluginDesc = plugindesc end def deserialize(params) @PluginType = params['PluginType'] @PluginName = params['PluginName'] @PluginDesc = params['PluginDesc'] end end # 拉取某个用户的所有资源信息 class ResourceInfo < TencentCloud::Common::AbstractModel # @param ResourceId: 用户购买的资源id，全局唯一 # @type ResourceId: String # @param Pid: 资源的pid，MTP加固-12767，应用加固-12750 MTP反作弊-12766 源代码混淆-12736 # @type Pid: Integer # @param CreateTime: 购买时间戳 # @type CreateTime: Integer # @param ExpireTime: 到期时间戳 # @type ExpireTime: Integer # @param IsBind: 0-未绑定，1-已绑定 # @type IsBind: Integer # @param BindInfo: 用户绑定app的基本信息 # @type BindInfo: :class:`Tencentcloud::Ms.v20180408.models.BindInfo` # @param ResourceName: 资源名称，如应用加固，漏洞扫描 # @type ResourceName: String attr_accessor :ResourceId, :Pid, :CreateTime, :ExpireTime, :IsBind, :BindInfo, :ResourceName def initialize(resourceid=nil, pid=nil, createtime=nil, expiretime=nil, isbind=nil, bindinfo=nil, resourcename=nil) @ResourceId = resourceid @Pid = pid @CreateTime = createtime @ExpireTime = expiretime @IsBind = isbind @BindInfo = bindinfo @ResourceName = resourcename end def deserialize(params) @ResourceId = params['ResourceId'] @Pid = params['Pid'] @CreateTime = params['CreateTime'] @ExpireTime = params['ExpireTime'] @IsBind = params['IsBind'] unless params['BindInfo'].nil? @BindInfo = BindInfo.new @BindInfo.deserialize(params['BindInfo']) end @ResourceName = params['ResourceName'] end end # 资源服务信息 class ResourceServiceInfo < TencentCloud::Common::AbstractModel # @param CreateTime: 创建时间戳 # @type CreateTime: Integer # @param ExpireTime: 到期时间戳 # @type ExpireTime: Integer # @param ResourceName: 资源名称，如应用加固，源码混淆 # @type ResourceName: String attr_accessor :CreateTime, :ExpireTime, :ResourceName def initialize(createtime=nil, expiretime=nil, resourcename=nil) @CreateTime = createtime @ExpireTime = expiretime @ResourceName = resourcename end def deserialize(params) @CreateTime = params['CreateTime'] @ExpireTime = params['ExpireTime'] @ResourceName = params['ResourceName'] end end # APK检测服务参数返回具体信息 class ResultListItem < TencentCloud::Common::AbstractModel # @param Banner: banner广告软件标记，分别为-1-不确定，0-否，1-是 # @type Banner: String # @param BoutiqueRecommand: 精品推荐列表广告标记，分别为-1-不确定，0-否，1-是 # @type BoutiqueRecommand: String # @param FloatWindows: 悬浮窗图标广告标记,分别为-1-不确定，0-否，1-是 # @type FloatWindows: String # @param IntegralWall: 积分墙广告软件标记，分别为 -1 -不确定，0-否，1-是 # @type IntegralWall: String # @param Md5: 安装包的md5 # @type Md5: String # @param NotifyBar: 通知栏广告软件标记，分别为-1-不确定，0-否，1-是 # @type NotifyBar: String # @param Official: 1表示官方，0表示非官方 # @type Official: String # @param PluginList: 广告插件结果列表 # @type PluginList: Array # @param OptPluginList: 非广告插件结果列表(SDK、风险插件等) # @type OptPluginList: Array # @param SafeType: 数字类型，分别为0-未知， 1-安全软件，2-风险软件，3-病毒软件 # @type SafeType: String # @param Sid: Session id，合作方可以用来区分回调数据，需要唯一。 # @type Sid: String # @param SoftName: 安装包名称 # @type SoftName: String # @param Spot: 插播广告软件标记，取值：-1 不确定，0否， 1 是 # @type Spot: String # @param VirusName: 病毒名称，utf8编码 # @type VirusName: String # @param VirusDesc: 病毒描述，utf8编码 # @type VirusDesc: String # @param RepackageStatus: 二次打包状态：0-表示默认；1-表示二次 # @type RepackageStatus: String # @param Errno: 应用错误码：0、1-表示正常； # 2表示System Error(engine analysis error). # 3表示App analysis error, please confirm it. # 4表示App have not cert, please confirm it. # 5表示App size is zero, please confirm it. # 6表示App have not package name, please confirm it. # 7表示App build time is empty, please confirm it. # 8表示App have not valid cert, please confirm it. # 99表示Other error. # 1000表示App downloadlink download fail, please confirm it. # 1001表示APP md5 different between real md5, please confirm it. # 1002表示App md5 uncollect, please offer downloadlink. # @type Errno: String # @param ErrMsg: 对应errno的错误信息描述 # @type ErrMsg: String attr_accessor :Banner, :BoutiqueRecommand, :FloatWindows, :IntegralWall, :Md5, :NotifyBar, :Official, :PluginList, :OptPluginList, :SafeType, :Sid, :SoftName, :Spot, :VirusName, :VirusDesc, :RepackageStatus, :Errno, :ErrMsg def initialize(banner=nil, boutiquerecommand=nil, floatwindows=nil, integralwall=nil, md5=nil, notifybar=nil, official=nil, pluginlist=nil, optpluginlist=nil, safetype=nil, sid=nil, softname=nil, spot=nil, virusname=nil, virusdesc=nil, repackagestatus=nil, errno=nil, errmsg=nil) @Banner = banner @BoutiqueRecommand = boutiquerecommand @FloatWindows = floatwindows @IntegralWall = integralwall @Md5 = md5 @NotifyBar = notifybar @Official = official @PluginList = pluginlist @OptPluginList = optpluginlist @SafeType = safetype @Sid = sid @SoftName = softname @Spot = spot @VirusName = virusname @VirusDesc = virusdesc @RepackageStatus = repackagestatus @Errno = errno @ErrMsg = errmsg end def deserialize(params) @Banner = params['Banner'] @BoutiqueRecommand = params['BoutiqueRecommand'] @FloatWindows = params['FloatWindows'] @IntegralWall = params['IntegralWall'] @Md5 = params['Md5'] @NotifyBar = params['NotifyBar'] @Official = params['Official'] unless params['PluginList'].nil? @PluginList = [] params['PluginList'].each do |i| pluginlistitem_tmp = PluginListItem.new pluginlistitem_tmp.deserialize(i) @PluginList << pluginlistitem_tmp end end unless params['OptPluginList'].nil? @OptPluginList = [] params['OptPluginList'].each do |i| optpluginlistitem_tmp = OptPluginListItem.new optpluginlistitem_tmp.deserialize(i) @OptPluginList << optpluginlistitem_tmp end end @SafeType = params['SafeType'] @Sid = params['Sid'] @SoftName = params['SoftName'] @Spot = params['Spot'] @VirusName = params['VirusName'] @VirusDesc = params['VirusDesc'] @RepackageStatus = params['RepackageStatus'] @Errno = params['Errno'] @ErrMsg = params['ErrMsg'] end end # 渠道合作sdk加固策略配置 class SDKPlan < TencentCloud::Common::AbstractModel # @param PlanId: 策略id # @type PlanId: Integer attr_accessor :PlanId def initialize(planid=nil) @PlanId = planid end def deserialize(params) @PlanId = params['PlanId'] end end # 渠道合作加固sdk加固结果 class SDKResult < TencentCloud::Common::AbstractModel # @param ResultId: 加固任务结果Id # @type ResultId: String attr_accessor :ResultId def initialize(resultid=nil) @ResultId = resultid end def deserialize(params) @ResultId = params['ResultId'] end end # 提交app加固的服务信息 class ServiceInfo < TencentCloud::Common::AbstractModel # @param ServiceEdition: 服务版本，基础版basic，专业版professional，企业版enterprise。 # @type ServiceEdition: String # @param CallbackUrl: 任务处理完成后的反向通知回调地址，如果不需要通知请传递空字符串。通知为POST请求，post包体数据示例{"Response":{"ItemId":"4cdad8fb86f036b06bccb3f58971c306","ShieldCode":0,"ShieldMd5":"78701576793c4a5f04e1c9660de0aa0b","ShieldSize":11997354,"TaskStatus":1,"TaskTime":1539148141}}，调用方需要返回如下信息，{"Result":"ok","Reason":"xxxxx"}，如果Result字段值不等于ok会继续回调。 # @type CallbackUrl: String # @param SubmitSource: 提交来源 YYB-应用宝 RDM-rdm MC-控制台 MAC_TOOL-mac工具 WIN_TOOL-window工具。 # @type SubmitSource: String # @param PlanId: 加固策略编号，如果不传则使用系统默认加固策略。如果指定的plan不存在会返回错误。 # @type PlanId: Integer attr_accessor :ServiceEdition, :CallbackUrl, :SubmitSource, :PlanId def initialize(serviceedition=nil, callbackurl=nil, submitsource=nil, planid=nil) @ServiceEdition = serviceedition @CallbackUrl = callbackurl @SubmitSource = submitsource @PlanId = planid end def deserialize(params) @ServiceEdition = params['ServiceEdition'] @CallbackUrl = params['CallbackUrl'] @SubmitSource = params['SubmitSource'] @PlanId = params['PlanId'] end end # 加固后app的信息 class ShieldInfo < TencentCloud::Common::AbstractModel # @param ShieldCode: 加固结果的返回码 # @type ShieldCode: Integer # @param ShieldSize: 加固后app的大小 # @type ShieldSize: Integer # @param ShieldMd5: 加固后app的md5 # @type ShieldMd5: String # @param AppUrl: 加固后的APP下载地址，该地址有效期为20分钟，请及时下载 # @type AppUrl: String # @param TaskTime: 加固的提交时间 # @type TaskTime: Integer # @param ItemId: 任务唯一标识 # @type ItemId: String # @param ServiceEdition: 加固版本，basic基础版，professional专业版，enterprise企业版 # @type ServiceEdition: String attr_accessor :ShieldCode, :ShieldSize, :ShieldMd5, :AppUrl, :TaskTime, :ItemId, :ServiceEdition def initialize(shieldcode=nil, shieldsize=nil, shieldmd5=nil, appurl=nil, tasktime=nil, itemid=nil, serviceedition=nil) @ShieldCode = shieldcode @ShieldSize = shieldsize @ShieldMd5 = shieldmd5 @AppUrl = appurl @TaskTime = tasktime @ItemId = itemid @ServiceEdition = serviceedition end def deserialize(params) @ShieldCode = params['ShieldCode'] @ShieldSize = params['ShieldSize'] @ShieldMd5 = params['ShieldMd5'] @AppUrl = params['AppUrl'] @TaskTime = params['TaskTime'] @ItemId = params['ItemId'] @ServiceEdition = params['ServiceEdition'] end end # 加固策略信息 class ShieldPlanInfo < TencentCloud::Common::AbstractModel # @param TotalCount: 加固策略数量 # @type TotalCount: Integer # @param PlanSet: 加固策略具体信息数组 # @type PlanSet: Array attr_accessor :TotalCount, :PlanSet def initialize(totalcount=nil, planset=nil) @TotalCount = totalcount @PlanSet = planset end def deserialize(params) @TotalCount = params['TotalCount'] unless params['PlanSet'].nil? @PlanSet = [] params['PlanSet'].each do |i| plandetailinfo_tmp = PlanDetailInfo.new plandetailinfo_tmp.deserialize(i) @PlanSet << plandetailinfo_tmp end end end end # so加固信息 class SoInfo < TencentCloud::Common::AbstractModel # @param SoFileNames: so文件列表 # @type SoFileNames: Array attr_accessor :SoFileNames def initialize(sofilenames=nil) @SoFileNames = sofilenames end def deserialize(params) @SoFileNames = params['SoFileNames'] end end end end end