# frozen_string_literal: true
# WARNING ABOUT GENERATED CODE
#
# This file is generated. See the contributing guide for more information:
# https://github.com/aws/aws-sdk-ruby/blob/version-3/CONTRIBUTING.md
#
# WARNING ABOUT GENERATED CODE
module Aws::ElasticLoadBalancingV2
module Types
# The specified ALPN policy is not supported.
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/ALPNPolicyNotSupportedException AWS API Documentation
#
class ALPNPolicyNotSupportedException < Aws::EmptyStructure; end
# Information about an action.
#
# Each rule must include exactly one of the following types of actions:
# `forward`, `fixed-response`, or `redirect`, and it must be the last
# action to be performed.
#
# @!attribute [rw] type
# The type of action.
# @return [String]
#
# @!attribute [rw] target_group_arn
# The Amazon Resource Name (ARN) of the target group. Specify only
# when `Type` is `forward` and you want to route to a single target
# group. To route to one or more target groups, use `ForwardConfig`
# instead.
# @return [String]
#
# @!attribute [rw] authenticate_oidc_config
# \[HTTPS listeners\] Information about an identity provider that is
# compliant with OpenID Connect (OIDC). Specify only when `Type` is
# `authenticate-oidc`.
# @return [Types::AuthenticateOidcActionConfig]
#
# @!attribute [rw] authenticate_cognito_config
# \[HTTPS listeners\] Information for using Amazon Cognito to
# authenticate users. Specify only when `Type` is
# `authenticate-cognito`.
# @return [Types::AuthenticateCognitoActionConfig]
#
# @!attribute [rw] order
# The order for the action. This value is required for rules with
# multiple actions. The action with the lowest value for order is
# performed first.
# @return [Integer]
#
# @!attribute [rw] redirect_config
# \[Application Load Balancer\] Information for creating a redirect
# action. Specify only when `Type` is `redirect`.
# @return [Types::RedirectActionConfig]
#
# @!attribute [rw] fixed_response_config
# \[Application Load Balancer\] Information for creating an action
# that returns a custom HTTP response. Specify only when `Type` is
# `fixed-response`.
# @return [Types::FixedResponseActionConfig]
#
# @!attribute [rw] forward_config
# Information for creating an action that distributes requests among
# one or more target groups. For Network Load Balancers, you can
# specify a single target group. Specify only when `Type` is
# `forward`. If you specify both `ForwardConfig` and `TargetGroupArn`,
# you can specify only one target group using `ForwardConfig` and it
# must be the same target group specified in `TargetGroupArn`.
# @return [Types::ForwardActionConfig]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/Action AWS API Documentation
#
class Action < Struct.new(
:type,
:target_group_arn,
:authenticate_oidc_config,
:authenticate_cognito_config,
:order,
:redirect_config,
:fixed_response_config,
:forward_config)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] listener_arn
# The Amazon Resource Name (ARN) of the listener.
# @return [String]
#
# @!attribute [rw] certificates
# The certificate to add. You can specify one certificate per call.
# Set `CertificateArn` to the certificate ARN but do not set
# `IsDefault`.
# @return [Array<Types::Certificate>]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/AddListenerCertificatesInput AWS API Documentation
#
class AddListenerCertificatesInput < Struct.new(
:listener_arn,
:certificates)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] certificates
# Information about the certificates in the certificate list.
# @return [Array<Types::Certificate>]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/AddListenerCertificatesOutput AWS API Documentation
#
class AddListenerCertificatesOutput < Struct.new(
:certificates)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] resource_arns
# The Amazon Resource Name (ARN) of the resource.
# @return [Array<String>]
#
# @!attribute [rw] tags
# The tags.
# @return [Array<Types::Tag>]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/AddTagsInput AWS API Documentation
#
class AddTagsInput < Struct.new(
:resource_arns,
:tags)
SENSITIVE = []
include Aws::Structure
end
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/AddTagsOutput AWS API Documentation
#
class AddTagsOutput < Aws::EmptyStructure; end
# @!attribute [rw] trust_store_arn
# The Amazon Resource Name (ARN) of the trust store.
# @return [String]
#
# @!attribute [rw] revocation_contents
# The revocation file to add.
# @return [Array<Types::RevocationContent>]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/AddTrustStoreRevocationsInput AWS API Documentation
#
class AddTrustStoreRevocationsInput < Struct.new(
:trust_store_arn,
:revocation_contents)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] trust_store_revocations
# Information about the revocation file added to the trust store.
# @return [Array<Types::TrustStoreRevocation>]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/AddTrustStoreRevocationsOutput AWS API Documentation
#
class AddTrustStoreRevocationsOutput < Struct.new(
:trust_store_revocations)
SENSITIVE = []
include Aws::Structure
end
# Information about the override status applied to a target.
#
# @!attribute [rw] state
# The state of the override.
# @return [String]
#
# @!attribute [rw] reason
# The reason code for the state.
# @return [String]
#
# @!attribute [rw] description
# A description of the override state that provides additional
# details.
# @return [String]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/AdministrativeOverride AWS API Documentation
#
class AdministrativeOverride < Struct.new(
:state,
:reason,
:description)
SENSITIVE = []
include Aws::Structure
end
# The specified allocation ID does not exist.
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/AllocationIdNotFoundException AWS API Documentation
#
class AllocationIdNotFoundException < Aws::EmptyStructure; end
# Information about anomaly detection and mitigation.
#
# @!attribute [rw] result
# The latest anomaly detection result.
# @return [String]
#
# @!attribute [rw] mitigation_in_effect
# Indicates whether anomaly mitigation is in progress.
# @return [String]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/AnomalyDetection AWS API Documentation
#
class AnomalyDetection < Struct.new(
:result,
:mitigation_in_effect)
SENSITIVE = []
include Aws::Structure
end
# Request parameters to use when integrating with Amazon Cognito to
# authenticate users.
#
# @!attribute [rw] user_pool_arn
# The Amazon Resource Name (ARN) of the Amazon Cognito user pool.
# @return [String]
#
# @!attribute [rw] user_pool_client_id
# The ID of the Amazon Cognito user pool client.
# @return [String]
#
# @!attribute [rw] user_pool_domain
# The domain prefix or fully-qualified domain name of the Amazon
# Cognito user pool.
# @return [String]
#
# @!attribute [rw] session_cookie_name
# The name of the cookie used to maintain session information. The
# default is AWSELBAuthSessionCookie.
# @return [String]
#
# @!attribute [rw] scope
# The set of user claims to be requested from the IdP. The default is
# `openid`.
#
# To verify which scope values your IdP supports and how to separate
# multiple values, see the documentation for your IdP.
# @return [String]
#
# @!attribute [rw] session_timeout
# The maximum duration of the authentication session, in seconds. The
# default is 604800 seconds (7 days).
# @return [Integer]
#
# @!attribute [rw] authentication_request_extra_params
# The query parameters (up to 10) to include in the redirect request
# to the authorization endpoint.
# @return [Hash<String,String>]
#
# @!attribute [rw] on_unauthenticated_request
# The behavior if the user is not authenticated. The following are
# possible values:
#
# * deny`` - Return an HTTP 401 Unauthorized error.
#
# * allow`` - Allow the request to be forwarded to the target.
#
# * authenticate`` - Redirect the request to the IdP authorization
# endpoint. This is the default value.
# @return [String]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/AuthenticateCognitoActionConfig AWS API Documentation
#
class AuthenticateCognitoActionConfig < Struct.new(
:user_pool_arn,
:user_pool_client_id,
:user_pool_domain,
:session_cookie_name,
:scope,
:session_timeout,
:authentication_request_extra_params,
:on_unauthenticated_request)
SENSITIVE = []
include Aws::Structure
end
# Request parameters when using an identity provider (IdP) that is
# compliant with OpenID Connect (OIDC) to authenticate users.
#
# @!attribute [rw] issuer
# The OIDC issuer identifier of the IdP. This must be a full URL,
# including the HTTPS protocol, the domain, and the path.
# @return [String]
#
# @!attribute [rw] authorization_endpoint
# The authorization endpoint of the IdP. This must be a full URL,
# including the HTTPS protocol, the domain, and the path.
# @return [String]
#
# @!attribute [rw] token_endpoint
# The token endpoint of the IdP. This must be a full URL, including
# the HTTPS protocol, the domain, and the path.
# @return [String]
#
# @!attribute [rw] user_info_endpoint
# The user info endpoint of the IdP. This must be a full URL,
# including the HTTPS protocol, the domain, and the path.
# @return [String]
#
# @!attribute [rw] client_id
# The OAuth 2.0 client identifier.
# @return [String]
#
# @!attribute [rw] client_secret
# The OAuth 2.0 client secret. This parameter is required if you are
# creating a rule. If you are modifying a rule, you can omit this
# parameter if you set `UseExistingClientSecret` to true.
# @return [String]
#
# @!attribute [rw] session_cookie_name
# The name of the cookie used to maintain session information. The
# default is AWSELBAuthSessionCookie.
# @return [String]
#
# @!attribute [rw] scope
# The set of user claims to be requested from the IdP. The default is
# `openid`.
#
# To verify which scope values your IdP supports and how to separate
# multiple values, see the documentation for your IdP.
# @return [String]
#
# @!attribute [rw] session_timeout
# The maximum duration of the authentication session, in seconds. The
# default is 604800 seconds (7 days).
# @return [Integer]
#
# @!attribute [rw] authentication_request_extra_params
# The query parameters (up to 10) to include in the redirect request
# to the authorization endpoint.
# @return [Hash<String,String>]
#
# @!attribute [rw] on_unauthenticated_request
# The behavior if the user is not authenticated. The following are
# possible values:
#
# * deny`` - Return an HTTP 401 Unauthorized error.
#
# * allow`` - Allow the request to be forwarded to the target.
#
# * authenticate`` - Redirect the request to the IdP authorization
# endpoint. This is the default value.
# @return [String]
#
# @!attribute [rw] use_existing_client_secret
# Indicates whether to use the existing client secret when modifying a
# rule. If you are creating a rule, you can omit this parameter or set
# it to false.
# @return [Boolean]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/AuthenticateOidcActionConfig AWS API Documentation
#
class AuthenticateOidcActionConfig < Struct.new(
:issuer,
:authorization_endpoint,
:token_endpoint,
:user_info_endpoint,
:client_id,
:client_secret,
:session_cookie_name,
:scope,
:session_timeout,
:authentication_request_extra_params,
:on_unauthenticated_request,
:use_existing_client_secret)
SENSITIVE = []
include Aws::Structure
end
# Information about an Availability Zone.
#
# @!attribute [rw] zone_name
# The name of the Availability Zone.
# @return [String]
#
# @!attribute [rw] subnet_id
# The ID of the subnet. You can specify one subnet per Availability
# Zone.
# @return [String]
#
# @!attribute [rw] outpost_id
# \[Application Load Balancers on Outposts\] The ID of the Outpost.
# @return [String]
#
# @!attribute [rw] load_balancer_addresses
# \[Network Load Balancers\] If you need static IP addresses for your
# load balancer, you can specify one Elastic IP address per
# Availability Zone when you create an internal-facing load balancer.
# For internal load balancers, you can specify a private IP address
# from the IPv4 range of the subnet.
# @return [Array<Types::LoadBalancerAddress>]
#
# @!attribute [rw] source_nat_ipv_6_prefixes
# \[Network Load Balancers with UDP listeners\] The IPv6 prefixes to
# use for source NAT. For each subnet, specify an IPv6 prefix (/80
# netmask) from the subnet CIDR block or `auto_assigned` to use an
# IPv6 prefix selected at random from the subnet CIDR block.
# @return [Array<String>]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/AvailabilityZone AWS API Documentation
#
class AvailabilityZone < Struct.new(
:zone_name,
:subnet_id,
:outpost_id,
:load_balancer_addresses,
:source_nat_ipv_6_prefixes)
SENSITIVE = []
include Aws::Structure
end
# The specified Availability Zone is not supported.
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/AvailabilityZoneNotSupportedException AWS API Documentation
#
class AvailabilityZoneNotSupportedException < Aws::EmptyStructure; end
# The specified ca certificate bundle does not exist.
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/CaCertificatesBundleNotFoundException AWS API Documentation
#
class CaCertificatesBundleNotFoundException < Aws::EmptyStructure; end
# Information about an SSL server certificate.
#
# @!attribute [rw] certificate_arn
# The Amazon Resource Name (ARN) of the certificate.
# @return [String]
#
# @!attribute [rw] is_default
# Indicates whether the certificate is the default certificate. Do not
# set this value when specifying a certificate as an input. This value
# is not included in the output when describing a listener, but is
# included when describing listener certificates.
# @return [Boolean]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/Certificate AWS API Documentation
#
class Certificate < Struct.new(
:certificate_arn,
:is_default)
SENSITIVE = []
include Aws::Structure
end
# The specified certificate does not exist.
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/CertificateNotFoundException AWS API Documentation
#
class CertificateNotFoundException < Aws::EmptyStructure; end
# Information about a cipher used in a policy.
#
# @!attribute [rw] name
# The name of the cipher.
# @return [String]
#
# @!attribute [rw] priority
# The priority of the cipher.
# @return [Integer]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/Cipher AWS API Documentation
#
class Cipher < Struct.new(
:name,
:priority)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] load_balancer_arn
# The Amazon Resource Name (ARN) of the load balancer.
# @return [String]
#
# @!attribute [rw] protocol
# The protocol for connections from clients to the load balancer. For
# Application Load Balancers, the supported protocols are HTTP and
# HTTPS. For Network Load Balancers, the supported protocols are TCP,
# TLS, UDP, and TCP\_UDP. You can’t specify the UDP or TCP\_UDP
# protocol if dual-stack mode is enabled. You can't specify a
# protocol for a Gateway Load Balancer.
# @return [String]
#
# @!attribute [rw] port
# The port on which the load balancer is listening. You can't specify
# a port for a Gateway Load Balancer.
# @return [Integer]
#
# @!attribute [rw] ssl_policy
# \[HTTPS and TLS listeners\] The security policy that defines which
# protocols and ciphers are supported.
#
# For more information, see [Security policies][1] in the *Application
# Load Balancers Guide* and [Security policies][2] in the *Network
# Load Balancers Guide*.
#
#
#
# [1]: https://docs.aws.amazon.com/elasticloadbalancing/latest/application/create-https-listener.html#describe-ssl-policies
# [2]: https://docs.aws.amazon.com/elasticloadbalancing/latest/network/create-tls-listener.html#describe-ssl-policies
# @return [String]
#
# @!attribute [rw] certificates
# \[HTTPS and TLS listeners\] The default certificate for the
# listener. You must provide exactly one certificate. Set
# `CertificateArn` to the certificate ARN but do not set `IsDefault`.
# @return [Array<Types::Certificate>]
#
# @!attribute [rw] default_actions
# The actions for the default rule.
# @return [Array<Types::Action>]
#
# @!attribute [rw] alpn_policy
# \[TLS listeners\] The name of the Application-Layer Protocol
# Negotiation (ALPN) policy. You can specify one policy name. The
# following are the possible values:
#
# * `HTTP1Only`
#
# * `HTTP2Only`
#
# * `HTTP2Optional`
#
# * `HTTP2Preferred`
#
# * `None`
#
# For more information, see [ALPN policies][1] in the *Network Load
# Balancers Guide*.
#
#
#
# [1]: https://docs.aws.amazon.com/elasticloadbalancing/latest/network/create-tls-listener.html#alpn-policies
# @return [Array<String>]
#
# @!attribute [rw] tags
# The tags to assign to the listener.
# @return [Array<Types::Tag>]
#
# @!attribute [rw] mutual_authentication
# The mutual authentication configuration information.
# @return [Types::MutualAuthenticationAttributes]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/CreateListenerInput AWS API Documentation
#
class CreateListenerInput < Struct.new(
:load_balancer_arn,
:protocol,
:port,
:ssl_policy,
:certificates,
:default_actions,
:alpn_policy,
:tags,
:mutual_authentication)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] listeners
# Information about the listener.
# @return [Array<Types::Listener>]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/CreateListenerOutput AWS API Documentation
#
class CreateListenerOutput < Struct.new(
:listeners)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] name
# The name of the load balancer.
#
# This name must be unique per region per account, can have a maximum
# of 32 characters, must contain only alphanumeric characters or
# hyphens, must not begin or end with a hyphen, and must not begin
# with "internal-".
# @return [String]
#
# @!attribute [rw] subnets
# The IDs of the subnets. You can specify only one subnet per
# Availability Zone. You must specify either subnets or subnet
# mappings, but not both. To specify an Elastic IP address, specify
# subnet mappings instead of subnets.
#
# \[Application Load Balancers\] You must specify subnets from at
# least two Availability Zones.
#
# \[Application Load Balancers on Outposts\] You must specify one
# Outpost subnet.
#
# \[Application Load Balancers on Local Zones\] You can specify
# subnets from one or more Local Zones.
#
# \[Network Load Balancers and Gateway Load Balancers\] You can
# specify subnets from one or more Availability Zones.
# @return [Array<String>]
#
# @!attribute [rw] subnet_mappings
# The IDs of the subnets. You can specify only one subnet per
# Availability Zone. You must specify either subnets or subnet
# mappings, but not both.
#
# \[Application Load Balancers\] You must specify subnets from at
# least two Availability Zones. You can't specify Elastic IP
# addresses for your subnets.
#
# \[Application Load Balancers on Outposts\] You must specify one
# Outpost subnet.
#
# \[Application Load Balancers on Local Zones\] You can specify
# subnets from one or more Local Zones.
#
# \[Network Load Balancers\] You can specify subnets from one or more
# Availability Zones. You can specify one Elastic IP address per
# subnet if you need static IP addresses for your internet-facing load
# balancer. For internal load balancers, you can specify one private
# IP address per subnet from the IPv4 range of the subnet. For
# internet-facing load balancer, you can specify one IPv6 address per
# subnet.
#
# \[Gateway Load Balancers\] You can specify subnets from one or more
# Availability Zones. You can't specify Elastic IP addresses for your
# subnets.
# @return [Array<Types::SubnetMapping>]
#
# @!attribute [rw] security_groups
# \[Application Load Balancers and Network Load Balancers\] The IDs of
# the security groups for the load balancer.
# @return [Array<String>]
#
# @!attribute [rw] scheme
# The nodes of an Internet-facing load balancer have public IP
# addresses. The DNS name of an Internet-facing load balancer is
# publicly resolvable to the public IP addresses of the nodes.
# Therefore, Internet-facing load balancers can route requests from
# clients over the internet.
#
# The nodes of an internal load balancer have only private IP
# addresses. The DNS name of an internal load balancer is publicly
# resolvable to the private IP addresses of the nodes. Therefore,
# internal load balancers can route requests only from clients with
# access to the VPC for the load balancer.
#
# The default is an Internet-facing load balancer.
#
# You can't specify a scheme for a Gateway Load Balancer.
# @return [String]
#
# @!attribute [rw] tags
# The tags to assign to the load balancer.
# @return [Array<Types::Tag>]
#
# @!attribute [rw] type
# The type of load balancer. The default is `application`.
# @return [String]
#
# @!attribute [rw] ip_address_type
# The IP address type. Internal load balancers must use `ipv4`.
#
# \[Application Load Balancers\] The possible values are `ipv4` (IPv4
# addresses), `dualstack` (IPv4 and IPv6 addresses), and
# `dualstack-without-public-ipv4` (public IPv6 addresses and private
# IPv4 and IPv6 addresses).
#
# \[Network Load Balancers and Gateway Load Balancers\] The possible
# values are `ipv4` (IPv4 addresses) and `dualstack` (IPv4 and IPv6
# addresses).
# @return [String]
#
# @!attribute [rw] customer_owned_ipv_4_pool
# \[Application Load Balancers on Outposts\] The ID of the
# customer-owned address pool (CoIP pool).
# @return [String]
#
# @!attribute [rw] enable_prefix_for_ipv_6_source_nat
# \[Network Load Balancers with UDP listeners\] Indicates whether to
# use an IPv6 prefix from each subnet for source NAT. The IP address
# type must be `dualstack`. The default value is `off`.
# @return [String]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/CreateLoadBalancerInput AWS API Documentation
#
class CreateLoadBalancerInput < Struct.new(
:name,
:subnets,
:subnet_mappings,
:security_groups,
:scheme,
:tags,
:type,
:ip_address_type,
:customer_owned_ipv_4_pool,
:enable_prefix_for_ipv_6_source_nat)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] load_balancers
# Information about the load balancer.
# @return [Array<Types::LoadBalancer>]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/CreateLoadBalancerOutput AWS API Documentation
#
class CreateLoadBalancerOutput < Struct.new(
:load_balancers)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] listener_arn
# The Amazon Resource Name (ARN) of the listener.
# @return [String]
#
# @!attribute [rw] conditions
# The conditions.
# @return [Array<Types::RuleCondition>]
#
# @!attribute [rw] priority
# The rule priority. A listener can't have multiple rules with the
# same priority.
# @return [Integer]
#
# @!attribute [rw] actions
# The actions.
# @return [Array<Types::Action>]
#
# @!attribute [rw] tags
# The tags to assign to the rule.
# @return [Array<Types::Tag>]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/CreateRuleInput AWS API Documentation
#
class CreateRuleInput < Struct.new(
:listener_arn,
:conditions,
:priority,
:actions,
:tags)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] rules
# Information about the rule.
# @return [Array<Types::Rule>]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/CreateRuleOutput AWS API Documentation
#
class CreateRuleOutput < Struct.new(
:rules)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] name
# The name of the target group.
#
# This name must be unique per region per account, can have a maximum
# of 32 characters, must contain only alphanumeric characters or
# hyphens, and must not begin or end with a hyphen.
# @return [String]
#
# @!attribute [rw] protocol
# The protocol to use for routing traffic to the targets. For
# Application Load Balancers, the supported protocols are HTTP and
# HTTPS. For Network Load Balancers, the supported protocols are TCP,
# TLS, UDP, or TCP\_UDP. For Gateway Load Balancers, the supported
# protocol is GENEVE. A TCP\_UDP listener must be associated with a
# TCP\_UDP target group. If the target is a Lambda function, this
# parameter does not apply.
# @return [String]
#
# @!attribute [rw] protocol_version
# \[HTTP/HTTPS protocol\] The protocol version. Specify `GRPC` to send
# requests to targets using gRPC. Specify `HTTP2` to send requests to
# targets using HTTP/2. The default is `HTTP1`, which sends requests
# to targets using HTTP/1.1.
# @return [String]
#
# @!attribute [rw] port
# The port on which the targets receive traffic. This port is used
# unless you specify a port override when registering the target. If
# the target is a Lambda function, this parameter does not apply. If
# the protocol is GENEVE, the supported port is 6081.
# @return [Integer]
#
# @!attribute [rw] vpc_id
# The identifier of the virtual private cloud (VPC). If the target is
# a Lambda function, this parameter does not apply. Otherwise, this
# parameter is required.
# @return [String]
#
# @!attribute [rw] health_check_protocol
# The protocol the load balancer uses when performing health checks on
# targets. For Application Load Balancers, the default is HTTP. For
# Network Load Balancers and Gateway Load Balancers, the default is
# TCP. The TCP protocol is not supported for health checks if the
# protocol of the target group is HTTP or HTTPS. The GENEVE, TLS, UDP,
# and TCP\_UDP protocols are not supported for health checks.
# @return [String]
#
# @!attribute [rw] health_check_port
# The port the load balancer uses when performing health checks on
# targets. If the protocol is HTTP, HTTPS, TCP, TLS, UDP, or TCP\_UDP,
# the default is `traffic-port`, which is the port on which each
# target receives traffic from the load balancer. If the protocol is
# GENEVE, the default is port 80.
# @return [String]
#
# @!attribute [rw] health_check_enabled
# Indicates whether health checks are enabled. If the target type is
# `lambda`, health checks are disabled by default but can be enabled.
# If the target type is `instance`, `ip`, or `alb`, health checks are
# always enabled and can't be disabled.
# @return [Boolean]
#
# @!attribute [rw] health_check_path
# \[HTTP/HTTPS health checks\] The destination for health checks on
# the targets.
#
# \[HTTP1 or HTTP2 protocol version\] The ping path. The default is /.
#
# \[GRPC protocol version\] The path of a custom health check method
# with the format /package.service/method. The default is /Amazon Web
# Services.ALB/healthcheck.
# @return [String]
#
# @!attribute [rw] health_check_interval_seconds
# The approximate amount of time, in seconds, between health checks of
# an individual target. The range is 5-300. If the target group
# protocol is TCP, TLS, UDP, TCP\_UDP, HTTP or HTTPS, the default is
# 30 seconds. If the target group protocol is GENEVE, the default is
# 10 seconds. If the target type is `lambda`, the default is 35
# seconds.
# @return [Integer]
#
# @!attribute [rw] health_check_timeout_seconds
# The amount of time, in seconds, during which no response from a
# target means a failed health check. The range is 2–120 seconds. For
# target groups with a protocol of HTTP, the default is 6 seconds. For
# target groups with a protocol of TCP, TLS or HTTPS, the default is
# 10 seconds. For target groups with a protocol of GENEVE, the default
# is 5 seconds. If the target type is `lambda`, the default is 30
# seconds.
# @return [Integer]
#
# @!attribute [rw] healthy_threshold_count
# The number of consecutive health check successes required before
# considering a target healthy. The range is 2-10. If the target group
# protocol is TCP, TCP\_UDP, UDP, TLS, HTTP or HTTPS, the default is
# 5. For target groups with a protocol of GENEVE, the default is 5. If
# the target type is `lambda`, the default is 5.
# @return [Integer]
#
# @!attribute [rw] unhealthy_threshold_count
# The number of consecutive health check failures required before
# considering a target unhealthy. The range is 2-10. If the target
# group protocol is TCP, TCP\_UDP, UDP, TLS, HTTP or HTTPS, the
# default is 2. For target groups with a protocol of GENEVE, the
# default is 2. If the target type is `lambda`, the default is 5.
# @return [Integer]
#
# @!attribute [rw] matcher
# \[HTTP/HTTPS health checks\] The HTTP or gRPC codes to use when
# checking for a successful response from a target. For target groups
# with a protocol of TCP, TCP\_UDP, UDP or TLS the range is 200-599.
# For target groups with a protocol of HTTP or HTTPS, the range is
# 200-499. For target groups with a protocol of GENEVE, the range is
# 200-399.
# @return [Types::Matcher]
#
# @!attribute [rw] target_type
# The type of target that you must specify when registering targets
# with this target group. You can't specify targets for a target
# group using more than one target type.
#
# * `instance` - Register targets by instance ID. This is the default
# value.
#
# * `ip` - Register targets by IP address. You can specify IP
# addresses from the subnets of the virtual private cloud (VPC) for
# the target group, the RFC 1918 range (10.0.0.0/8, 172.16.0.0/12,
# and 192.168.0.0/16), and the RFC 6598 range (100.64.0.0/10). You
# can't specify publicly routable IP addresses.
#
# * `lambda` - Register a single Lambda function as a target.
#
# * `alb` - Register a single Application Load Balancer as a target.
# @return [String]
#
# @!attribute [rw] tags
# The tags to assign to the target group.
# @return [Array<Types::Tag>]
#
# @!attribute [rw] ip_address_type
# The IP address type. The default value is `ipv4`.
# @return [String]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/CreateTargetGroupInput AWS API Documentation
#
class CreateTargetGroupInput < Struct.new(
:name,
:protocol,
:protocol_version,
:port,
:vpc_id,
:health_check_protocol,
:health_check_port,
:health_check_enabled,
:health_check_path,
:health_check_interval_seconds,
:health_check_timeout_seconds,
:healthy_threshold_count,
:unhealthy_threshold_count,
:matcher,
:target_type,
:tags,
:ip_address_type)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] target_groups
# Information about the target group.
# @return [Array<Types::TargetGroup>]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/CreateTargetGroupOutput AWS API Documentation
#
class CreateTargetGroupOutput < Struct.new(
:target_groups)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] name
# The name of the trust store.
#
# This name must be unique per region and can't be changed after
# creation.
# @return [String]
#
# @!attribute [rw] ca_certificates_bundle_s3_bucket
# The Amazon S3 bucket for the ca certificates bundle.
# @return [String]
#
# @!attribute [rw] ca_certificates_bundle_s3_key
# The Amazon S3 path for the ca certificates bundle.
# @return [String]
#
# @!attribute [rw] ca_certificates_bundle_s3_object_version
# The Amazon S3 object version for the ca certificates bundle. If
# undefined the current version is used.
# @return [String]
#
# @!attribute [rw] tags
# The tags to assign to the trust store.
# @return [Array<Types::Tag>]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/CreateTrustStoreInput AWS API Documentation
#
class CreateTrustStoreInput < Struct.new(
:name,
:ca_certificates_bundle_s3_bucket,
:ca_certificates_bundle_s3_key,
:ca_certificates_bundle_s3_object_version,
:tags)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] trust_stores
# Information about the trust store created.
# @return [Array<Types::TrustStore>]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/CreateTrustStoreOutput AWS API Documentation
#
class CreateTrustStoreOutput < Struct.new(
:trust_stores)
SENSITIVE = []
include Aws::Structure
end
# The specified association can't be within the same account.
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/DeleteAssociationSameAccountException AWS API Documentation
#
class DeleteAssociationSameAccountException < Aws::EmptyStructure; end
# @!attribute [rw] listener_arn
# The Amazon Resource Name (ARN) of the listener.
# @return [String]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/DeleteListenerInput AWS API Documentation
#
class DeleteListenerInput < Struct.new(
:listener_arn)
SENSITIVE = []
include Aws::Structure
end
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/DeleteListenerOutput AWS API Documentation
#
class DeleteListenerOutput < Aws::EmptyStructure; end
# @!attribute [rw] load_balancer_arn
# The Amazon Resource Name (ARN) of the load balancer.
# @return [String]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/DeleteLoadBalancerInput AWS API Documentation
#
class DeleteLoadBalancerInput < Struct.new(
:load_balancer_arn)
SENSITIVE = []
include Aws::Structure
end
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/DeleteLoadBalancerOutput AWS API Documentation
#
class DeleteLoadBalancerOutput < Aws::EmptyStructure; end
# @!attribute [rw] rule_arn
# The Amazon Resource Name (ARN) of the rule.
# @return [String]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/DeleteRuleInput AWS API Documentation
#
class DeleteRuleInput < Struct.new(
:rule_arn)
SENSITIVE = []
include Aws::Structure
end
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/DeleteRuleOutput AWS API Documentation
#
class DeleteRuleOutput < Aws::EmptyStructure; end
# @!attribute [rw] trust_store_arn
# The Amazon Resource Name (ARN) of the trust store.
# @return [String]
#
# @!attribute [rw] resource_arn
# The Amazon Resource Name (ARN) of the resource.
# @return [String]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/DeleteSharedTrustStoreAssociationInput AWS API Documentation
#
class DeleteSharedTrustStoreAssociationInput < Struct.new(
:trust_store_arn,
:resource_arn)
SENSITIVE = []
include Aws::Structure
end
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/DeleteSharedTrustStoreAssociationOutput AWS API Documentation
#
class DeleteSharedTrustStoreAssociationOutput < Aws::EmptyStructure; end
# @!attribute [rw] target_group_arn
# The Amazon Resource Name (ARN) of the target group.
# @return [String]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/DeleteTargetGroupInput AWS API Documentation
#
class DeleteTargetGroupInput < Struct.new(
:target_group_arn)
SENSITIVE = []
include Aws::Structure
end
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/DeleteTargetGroupOutput AWS API Documentation
#
class DeleteTargetGroupOutput < Aws::EmptyStructure; end
# @!attribute [rw] trust_store_arn
# The Amazon Resource Name (ARN) of the trust store.
# @return [String]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/DeleteTrustStoreInput AWS API Documentation
#
class DeleteTrustStoreInput < Struct.new(
:trust_store_arn)
SENSITIVE = []
include Aws::Structure
end
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/DeleteTrustStoreOutput AWS API Documentation
#
class DeleteTrustStoreOutput < Aws::EmptyStructure; end
# @!attribute [rw] target_group_arn
# The Amazon Resource Name (ARN) of the target group.
# @return [String]
#
# @!attribute [rw] targets
# The targets. If you specified a port override when you registered a
# target, you must specify both the target ID and the port when you
# deregister it.
# @return [Array<Types::TargetDescription>]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/DeregisterTargetsInput AWS API Documentation
#
class DeregisterTargetsInput < Struct.new(
:target_group_arn,
:targets)
SENSITIVE = []
include Aws::Structure
end
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/DeregisterTargetsOutput AWS API Documentation
#
class DeregisterTargetsOutput < Aws::EmptyStructure; end
# @!attribute [rw] marker
# The marker for the next set of results. (You received this marker
# from a previous call.)
# @return [String]
#
# @!attribute [rw] page_size
# The maximum number of results to return with this call.
# @return [Integer]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/DescribeAccountLimitsInput AWS API Documentation
#
class DescribeAccountLimitsInput < Struct.new(
:marker,
:page_size)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] limits
# Information about the limits.
# @return [Array<Types::Limit>]
#
# @!attribute [rw] next_marker
# If there are additional results, this is the marker for the next set
# of results. Otherwise, this is null.
# @return [String]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/DescribeAccountLimitsOutput AWS API Documentation
#
class DescribeAccountLimitsOutput < Struct.new(
:limits,
:next_marker)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] listener_arn
# The Amazon Resource Name (ARN) of the listener.
# @return [String]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/DescribeListenerAttributesInput AWS API Documentation
#
class DescribeListenerAttributesInput < Struct.new(
:listener_arn)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] attributes
# Information about the listener attributes.
# @return [Array<Types::ListenerAttribute>]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/DescribeListenerAttributesOutput AWS API Documentation
#
class DescribeListenerAttributesOutput < Struct.new(
:attributes)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] listener_arn
# The Amazon Resource Names (ARN) of the listener.
# @return [String]
#
# @!attribute [rw] marker
# The marker for the next set of results. (You received this marker
# from a previous call.)
# @return [String]
#
# @!attribute [rw] page_size
# The maximum number of results to return with this call.
# @return [Integer]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/DescribeListenerCertificatesInput AWS API Documentation
#
class DescribeListenerCertificatesInput < Struct.new(
:listener_arn,
:marker,
:page_size)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] certificates
# Information about the certificates.
# @return [Array<Types::Certificate>]
#
# @!attribute [rw] next_marker
# If there are additional results, this is the marker for the next set
# of results. Otherwise, this is null.
# @return [String]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/DescribeListenerCertificatesOutput AWS API Documentation
#
class DescribeListenerCertificatesOutput < Struct.new(
:certificates,
:next_marker)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] load_balancer_arn
# The Amazon Resource Name (ARN) of the load balancer.
# @return [String]
#
# @!attribute [rw] listener_arns
# The Amazon Resource Names (ARN) of the listeners.
# @return [Array<String>]
#
# @!attribute [rw] marker
# The marker for the next set of results. (You received this marker
# from a previous call.)
# @return [String]
#
# @!attribute [rw] page_size
# The maximum number of results to return with this call.
# @return [Integer]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/DescribeListenersInput AWS API Documentation
#
class DescribeListenersInput < Struct.new(
:load_balancer_arn,
:listener_arns,
:marker,
:page_size)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] listeners
# Information about the listeners.
# @return [Array<Types::Listener>]
#
# @!attribute [rw] next_marker
# If there are additional results, this is the marker for the next set
# of results. Otherwise, this is null.
# @return [String]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/DescribeListenersOutput AWS API Documentation
#
class DescribeListenersOutput < Struct.new(
:listeners,
:next_marker)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] load_balancer_arn
# The Amazon Resource Name (ARN) of the load balancer.
# @return [String]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/DescribeLoadBalancerAttributesInput AWS API Documentation
#
class DescribeLoadBalancerAttributesInput < Struct.new(
:load_balancer_arn)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] attributes
# Information about the load balancer attributes.
# @return [Array<Types::LoadBalancerAttribute>]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/DescribeLoadBalancerAttributesOutput AWS API Documentation
#
class DescribeLoadBalancerAttributesOutput < Struct.new(
:attributes)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] load_balancer_arns
# The Amazon Resource Names (ARN) of the load balancers. You can
# specify up to 20 load balancers in a single call.
# @return [Array<String>]
#
# @!attribute [rw] names
# The names of the load balancers.
# @return [Array<String>]
#
# @!attribute [rw] marker
# The marker for the next set of results. (You received this marker
# from a previous call.)
# @return [String]
#
# @!attribute [rw] page_size
# The maximum number of results to return with this call.
# @return [Integer]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/DescribeLoadBalancersInput AWS API Documentation
#
class DescribeLoadBalancersInput < Struct.new(
:load_balancer_arns,
:names,
:marker,
:page_size)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] load_balancers
# Information about the load balancers.
# @return [Array<Types::LoadBalancer>]
#
# @!attribute [rw] next_marker
# If there are additional results, this is the marker for the next set
# of results. Otherwise, this is null.
# @return [String]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/DescribeLoadBalancersOutput AWS API Documentation
#
class DescribeLoadBalancersOutput < Struct.new(
:load_balancers,
:next_marker)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] listener_arn
# The Amazon Resource Name (ARN) of the listener.
# @return [String]
#
# @!attribute [rw] rule_arns
# The Amazon Resource Names (ARN) of the rules.
# @return [Array<String>]
#
# @!attribute [rw] marker
# The marker for the next set of results. (You received this marker
# from a previous call.)
# @return [String]
#
# @!attribute [rw] page_size
# The maximum number of results to return with this call.
# @return [Integer]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/DescribeRulesInput AWS API Documentation
#
class DescribeRulesInput < Struct.new(
:listener_arn,
:rule_arns,
:marker,
:page_size)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] rules
# Information about the rules.
# @return [Array<Types::Rule>]
#
# @!attribute [rw] next_marker
# If there are additional results, this is the marker for the next set
# of results. Otherwise, this is null.
# @return [String]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/DescribeRulesOutput AWS API Documentation
#
class DescribeRulesOutput < Struct.new(
:rules,
:next_marker)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] names
# The names of the policies.
# @return [Array<String>]
#
# @!attribute [rw] marker
# The marker for the next set of results. (You received this marker
# from a previous call.)
# @return [String]
#
# @!attribute [rw] page_size
# The maximum number of results to return with this call.
# @return [Integer]
#
# @!attribute [rw] load_balancer_type
# The type of load balancer. The default lists the SSL policies for
# all load balancers.
# @return [String]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/DescribeSSLPoliciesInput AWS API Documentation
#
class DescribeSSLPoliciesInput < Struct.new(
:names,
:marker,
:page_size,
:load_balancer_type)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] ssl_policies
# Information about the security policies.
# @return [Array<Types::SslPolicy>]
#
# @!attribute [rw] next_marker
# If there are additional results, this is the marker for the next set
# of results. Otherwise, this is null.
# @return [String]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/DescribeSSLPoliciesOutput AWS API Documentation
#
class DescribeSSLPoliciesOutput < Struct.new(
:ssl_policies,
:next_marker)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] resource_arns
# The Amazon Resource Names (ARN) of the resources. You can specify up
# to 20 resources in a single call.
# @return [Array<String>]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/DescribeTagsInput AWS API Documentation
#
class DescribeTagsInput < Struct.new(
:resource_arns)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] tag_descriptions
# Information about the tags.
# @return [Array<Types::TagDescription>]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/DescribeTagsOutput AWS API Documentation
#
class DescribeTagsOutput < Struct.new(
:tag_descriptions)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] target_group_arn
# The Amazon Resource Name (ARN) of the target group.
# @return [String]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/DescribeTargetGroupAttributesInput AWS API Documentation
#
class DescribeTargetGroupAttributesInput < Struct.new(
:target_group_arn)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] attributes
# Information about the target group attributes
# @return [Array<Types::TargetGroupAttribute>]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/DescribeTargetGroupAttributesOutput AWS API Documentation
#
class DescribeTargetGroupAttributesOutput < Struct.new(
:attributes)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] load_balancer_arn
# The Amazon Resource Name (ARN) of the load balancer.
# @return [String]
#
# @!attribute [rw] target_group_arns
# The Amazon Resource Names (ARN) of the target groups.
# @return [Array<String>]
#
# @!attribute [rw] names
# The names of the target groups.
# @return [Array<String>]
#
# @!attribute [rw] marker
# The marker for the next set of results. (You received this marker
# from a previous call.)
# @return [String]
#
# @!attribute [rw] page_size
# The maximum number of results to return with this call.
# @return [Integer]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/DescribeTargetGroupsInput AWS API Documentation
#
class DescribeTargetGroupsInput < Struct.new(
:load_balancer_arn,
:target_group_arns,
:names,
:marker,
:page_size)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] target_groups
# Information about the target groups.
# @return [Array<Types::TargetGroup>]
#
# @!attribute [rw] next_marker
# If there are additional results, this is the marker for the next set
# of results. Otherwise, this is null.
# @return [String]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/DescribeTargetGroupsOutput AWS API Documentation
#
class DescribeTargetGroupsOutput < Struct.new(
:target_groups,
:next_marker)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] target_group_arn
# The Amazon Resource Name (ARN) of the target group.
# @return [String]
#
# @!attribute [rw] targets
# The targets.
# @return [Array<Types::TargetDescription>]
#
# @!attribute [rw] include
# Used to include anomaly detection information.
# @return [Array<String>]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/DescribeTargetHealthInput AWS API Documentation
#
class DescribeTargetHealthInput < Struct.new(
:target_group_arn,
:targets,
:include)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] target_health_descriptions
# Information about the health of the targets.
# @return [Array<Types::TargetHealthDescription>]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/DescribeTargetHealthOutput AWS API Documentation
#
class DescribeTargetHealthOutput < Struct.new(
:target_health_descriptions)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] trust_store_arn
# The Amazon Resource Name (ARN) of the trust store.
# @return [String]
#
# @!attribute [rw] marker
# The marker for the next set of results. (You received this marker
# from a previous call.)
# @return [String]
#
# @!attribute [rw] page_size
# The maximum number of results to return with this call.
# @return [Integer]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/DescribeTrustStoreAssociationsInput AWS API Documentation
#
class DescribeTrustStoreAssociationsInput < Struct.new(
:trust_store_arn,
:marker,
:page_size)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] trust_store_associations
# Information about the resources the trust store is associated to.
# @return [Array<Types::TrustStoreAssociation>]
#
# @!attribute [rw] next_marker
# If there are additional results, this is the marker for the next set
# of results. Otherwise, this is null.
# @return [String]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/DescribeTrustStoreAssociationsOutput AWS API Documentation
#
class DescribeTrustStoreAssociationsOutput < Struct.new(
:trust_store_associations,
:next_marker)
SENSITIVE = []
include Aws::Structure
end
# Information about the revocations used by a trust store.
#
# @!attribute [rw] trust_store_arn
# The Amazon Resource Name (ARN) of the trust store.
# @return [String]
#
# @!attribute [rw] revocation_id
# The revocation ID of a revocation file in use.
# @return [Integer]
#
# @!attribute [rw] revocation_type
# The type of revocation file.
# @return [String]
#
# @!attribute [rw] number_of_revoked_entries
# The number of revoked certificates.
# @return [Integer]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/DescribeTrustStoreRevocation AWS API Documentation
#
class DescribeTrustStoreRevocation < Struct.new(
:trust_store_arn,
:revocation_id,
:revocation_type,
:number_of_revoked_entries)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] trust_store_arn
# The Amazon Resource Name (ARN) of the trust store.
# @return [String]
#
# @!attribute [rw] revocation_ids
# The revocation IDs of the revocation files you want to describe.
# @return [Array<Integer>]
#
# @!attribute [rw] marker
# The marker for the next set of results. (You received this marker
# from a previous call.)
# @return [String]
#
# @!attribute [rw] page_size
# The maximum number of results to return with this call.
# @return [Integer]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/DescribeTrustStoreRevocationsInput AWS API Documentation
#
class DescribeTrustStoreRevocationsInput < Struct.new(
:trust_store_arn,
:revocation_ids,
:marker,
:page_size)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] trust_store_revocations
# Information about the revocation file in the trust store.
# @return [Array<Types::DescribeTrustStoreRevocation>]
#
# @!attribute [rw] next_marker
# If there are additional results, this is the marker for the next set
# of results. Otherwise, this is null.
# @return [String]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/DescribeTrustStoreRevocationsOutput AWS API Documentation
#
class DescribeTrustStoreRevocationsOutput < Struct.new(
:trust_store_revocations,
:next_marker)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] trust_store_arns
# The Amazon Resource Name (ARN) of the trust store.
# @return [Array<String>]
#
# @!attribute [rw] names
# The names of the trust stores.
# @return [Array<String>]
#
# @!attribute [rw] marker
# The marker for the next set of results. (You received this marker
# from a previous call.)
# @return [String]
#
# @!attribute [rw] page_size
# The maximum number of results to return with this call.
# @return [Integer]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/DescribeTrustStoresInput AWS API Documentation
#
class DescribeTrustStoresInput < Struct.new(
:trust_store_arns,
:names,
:marker,
:page_size)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] trust_stores
# Information about the trust stores.
# @return [Array<Types::TrustStore>]
#
# @!attribute [rw] next_marker
# If there are additional results, this is the marker for the next set
# of results. Otherwise, this is null.
# @return [String]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/DescribeTrustStoresOutput AWS API Documentation
#
class DescribeTrustStoresOutput < Struct.new(
:trust_stores,
:next_marker)
SENSITIVE = []
include Aws::Structure
end
# A listener with the specified port already exists.
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/DuplicateListenerException AWS API Documentation
#
class DuplicateListenerException < Aws::EmptyStructure; end
# A load balancer with the specified name already exists.
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/DuplicateLoadBalancerNameException AWS API Documentation
#
class DuplicateLoadBalancerNameException < Aws::EmptyStructure; end
# A tag key was specified more than once.
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/DuplicateTagKeysException AWS API Documentation
#
class DuplicateTagKeysException < Aws::EmptyStructure; end
# A target group with the specified name already exists.
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/DuplicateTargetGroupNameException AWS API Documentation
#
class DuplicateTargetGroupNameException < Aws::EmptyStructure; end
# A trust store with the specified name already exists.
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/DuplicateTrustStoreNameException AWS API Documentation
#
class DuplicateTrustStoreNameException < Aws::EmptyStructure; end
# Information about an action that returns a custom HTTP response.
#
# @!attribute [rw] message_body
# The message.
# @return [String]
#
# @!attribute [rw] status_code
# The HTTP response code (2XX, 4XX, or 5XX).
# @return [String]
#
# @!attribute [rw] content_type
# The content type.
#
# Valid Values: text/plain \| text/css \| text/html \|
# application/javascript \| application/json
# @return [String]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/FixedResponseActionConfig AWS API Documentation
#
class FixedResponseActionConfig < Struct.new(
:message_body,
:status_code,
:content_type)
SENSITIVE = []
include Aws::Structure
end
# Information about a forward action.
#
# @!attribute [rw] target_groups
# The target groups. For Network Load Balancers, you can specify a
# single target group.
# @return [Array<Types::TargetGroupTuple>]
#
# @!attribute [rw] target_group_stickiness_config
# The target group stickiness for the rule.
# @return [Types::TargetGroupStickinessConfig]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/ForwardActionConfig AWS API Documentation
#
class ForwardActionConfig < Struct.new(
:target_groups,
:target_group_stickiness_config)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] resource_arn
# The Amazon Resource Name (ARN) of the resource.
# @return [String]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/GetResourcePolicyInput AWS API Documentation
#
class GetResourcePolicyInput < Struct.new(
:resource_arn)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] policy
# The content of the resource policy.
# @return [String]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/GetResourcePolicyOutput AWS API Documentation
#
class GetResourcePolicyOutput < Struct.new(
:policy)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] trust_store_arn
# The Amazon Resource Name (ARN) of the trust store.
# @return [String]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/GetTrustStoreCaCertificatesBundleInput AWS API Documentation
#
class GetTrustStoreCaCertificatesBundleInput < Struct.new(
:trust_store_arn)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] location
# The ca certificate bundles Amazon S3 URI.
# @return [String]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/GetTrustStoreCaCertificatesBundleOutput AWS API Documentation
#
class GetTrustStoreCaCertificatesBundleOutput < Struct.new(
:location)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] trust_store_arn
# The Amazon Resource Name (ARN) of the trust store.
# @return [String]
#
# @!attribute [rw] revocation_id
# The revocation ID of the revocation file.
# @return [Integer]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/GetTrustStoreRevocationContentInput AWS API Documentation
#
class GetTrustStoreRevocationContentInput < Struct.new(
:trust_store_arn,
:revocation_id)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] location
# The revocation files Amazon S3 URI.
# @return [String]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/GetTrustStoreRevocationContentOutput AWS API Documentation
#
class GetTrustStoreRevocationContentOutput < Struct.new(
:location)
SENSITIVE = []
include Aws::Structure
end
# The health of the specified targets could not be retrieved due to an
# internal error.
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/HealthUnavailableException AWS API Documentation
#
class HealthUnavailableException < Aws::EmptyStructure; end
# Information about a host header condition.
#
# @!attribute [rw] values
# The host names. The maximum size of each name is 128 characters. The
# comparison is case insensitive. The following wildcard characters
# are supported: * (matches 0 or more characters) and ? (matches
# exactly 1 character).
#
# If you specify multiple strings, the condition is satisfied if one
# of the strings matches the host name.
# @return [Array<String>]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/HostHeaderConditionConfig AWS API Documentation
#
class HostHeaderConditionConfig < Struct.new(
:values)
SENSITIVE = []
include Aws::Structure
end
# Information about an HTTP header condition.
#
# There is a set of standard HTTP header fields. You can also define
# custom HTTP header fields.
#
# @!attribute [rw] http_header_name
# The name of the HTTP header field. The maximum size is 40
# characters. The header name is case insensitive. The allowed
# characters are specified by RFC 7230. Wildcards are not supported.
#
# You can't use an HTTP header condition to specify the host header.
# Use HostHeaderConditionConfig to specify a host header condition.
# @return [String]
#
# @!attribute [rw] values
# The strings to compare against the value of the HTTP header. The
# maximum size of each string is 128 characters. The comparison
# strings are case insensitive. The following wildcard characters are
# supported: * (matches 0 or more characters) and ? (matches exactly
# 1 character).
#
# If the same header appears multiple times in the request, we search
# them in order until a match is found.
#
# If you specify multiple strings, the condition is satisfied if one
# of the strings matches the value of the HTTP header. To require that
# all of the strings are a match, create one condition per string.
# @return [Array<String>]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/HttpHeaderConditionConfig AWS API Documentation
#
class HttpHeaderConditionConfig < Struct.new(
:http_header_name,
:values)
SENSITIVE = []
include Aws::Structure
end
# Information about an HTTP method condition.
#
# HTTP defines a set of request methods, also referred to as HTTP verbs.
# For more information, see the [HTTP Method Registry][1]. You can also
# define custom HTTP methods.
#
#
#
# [1]: https://www.iana.org/assignments/http-methods/http-methods.xhtml
#
# @!attribute [rw] values
# The name of the request method. The maximum size is 40 characters.
# The allowed characters are A-Z, hyphen (-), and underscore (\_). The
# comparison is case sensitive. Wildcards are not supported;
# therefore, the method name must be an exact match.
#
# If you specify multiple strings, the condition is satisfied if one
# of the strings matches the HTTP request method. We recommend that
# you route GET and HEAD requests in the same way, because the
# response to a HEAD request may be cached.
# @return [Array<String>]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/HttpRequestMethodConditionConfig AWS API Documentation
#
class HttpRequestMethodConditionConfig < Struct.new(
:values)
SENSITIVE = []
include Aws::Structure
end
# The specified configuration is not valid with this protocol.
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/IncompatibleProtocolsException AWS API Documentation
#
class IncompatibleProtocolsException < Aws::EmptyStructure; end
# The specified ca certificate bundle is in an invalid format, or
# corrupt.
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/InvalidCaCertificatesBundleException AWS API Documentation
#
class InvalidCaCertificatesBundleException < Aws::EmptyStructure; end
# The requested configuration is not valid.
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/InvalidConfigurationRequestException AWS API Documentation
#
class InvalidConfigurationRequestException < Aws::EmptyStructure; end
# The requested action is not valid.
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/InvalidLoadBalancerActionException AWS API Documentation
#
class InvalidLoadBalancerActionException < Aws::EmptyStructure; end
# The provided revocation file is an invalid format, or uses an
# incorrect algorithm.
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/InvalidRevocationContentException AWS API Documentation
#
class InvalidRevocationContentException < Aws::EmptyStructure; end
# The requested scheme is not valid.
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/InvalidSchemeException AWS API Documentation
#
class InvalidSchemeException < Aws::EmptyStructure; end
# The specified security group does not exist.
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/InvalidSecurityGroupException AWS API Documentation
#
class InvalidSecurityGroupException < Aws::EmptyStructure; end
# The specified subnet is out of available addresses.
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/InvalidSubnetException AWS API Documentation
#
class InvalidSubnetException < Aws::EmptyStructure; end
# The specified target does not exist, is not in the same VPC as the
# target group, or has an unsupported instance type.
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/InvalidTargetException AWS API Documentation
#
class InvalidTargetException < Aws::EmptyStructure; end
# Information about an Elastic Load Balancing resource limit for your
# Amazon Web Services account.
#
# For more information, see the following:
#
# * [Quotas for your Application Load Balancers][1]
#
# * [Quotas for your Network Load Balancers][2]
#
# * [Quotas for your Gateway Load Balancers][3]
#
#
#
# [1]: https://docs.aws.amazon.com/elasticloadbalancing/latest/application/load-balancer-limits.html
# [2]: https://docs.aws.amazon.com/elasticloadbalancing/latest/network/load-balancer-limits.html
# [3]: https://docs.aws.amazon.com/elasticloadbalancing/latest/gateway/quotas-limits.html
#
# @!attribute [rw] name
# The name of the limit. The possible values are:
#
# * application-load-balancers
#
# * condition-values-per-alb-rule
#
# * condition-wildcards-per-alb-rule
#
# * gateway-load-balancers
#
# * gateway-load-balancers-per-vpc
#
# * geneve-target-groups
#
# * listeners-per-application-load-balancer
#
# * listeners-per-network-load-balancer
#
# * network-load-balancers
#
# * rules-per-application-load-balancer
#
# * target-groups
#
# * target-groups-per-action-on-application-load-balancer
#
# * target-groups-per-action-on-network-load-balancer
#
# * target-groups-per-application-load-balancer
#
# * targets-per-application-load-balancer
#
# * targets-per-availability-zone-per-gateway-load-balancer
#
# * targets-per-availability-zone-per-network-load-balancer
#
# * targets-per-network-load-balancer
# @return [String]
#
# @!attribute [rw] max
# The maximum value of the limit.
# @return [String]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/Limit AWS API Documentation
#
class Limit < Struct.new(
:name,
:max)
SENSITIVE = []
include Aws::Structure
end
# Information about a listener.
#
# @!attribute [rw] listener_arn
# The Amazon Resource Name (ARN) of the listener.
# @return [String]
#
# @!attribute [rw] load_balancer_arn
# The Amazon Resource Name (ARN) of the load balancer.
# @return [String]
#
# @!attribute [rw] port
# The port on which the load balancer is listening.
# @return [Integer]
#
# @!attribute [rw] protocol
# The protocol for connections from clients to the load balancer.
# @return [String]
#
# @!attribute [rw] certificates
# \[HTTPS or TLS listener\] The default certificate for the listener.
# @return [Array<Types::Certificate>]
#
# @!attribute [rw] ssl_policy
# \[HTTPS or TLS listener\] The security policy that defines which
# protocols and ciphers are supported.
# @return [String]
#
# @!attribute [rw] default_actions
# The default actions for the listener.
# @return [Array<Types::Action>]
#
# @!attribute [rw] alpn_policy
# \[TLS listener\] The name of the Application-Layer Protocol
# Negotiation (ALPN) policy.
# @return [Array<String>]
#
# @!attribute [rw] mutual_authentication
# The mutual authentication configuration information.
# @return [Types::MutualAuthenticationAttributes]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/Listener AWS API Documentation
#
class Listener < Struct.new(
:listener_arn,
:load_balancer_arn,
:port,
:protocol,
:certificates,
:ssl_policy,
:default_actions,
:alpn_policy,
:mutual_authentication)
SENSITIVE = []
include Aws::Structure
end
# Information about a listener attribute.
#
# @!attribute [rw] key
# The name of the attribute.
#
# The following attribute is supported by Network Load Balancers, and
# Gateway Load Balancers.
#
# * `tcp.idle_timeout.seconds` - The tcp idle timeout value, in
# seconds. The valid range is 60-6000 seconds. The default is 350
# seconds.
#
# ^
# @return [String]
#
# @!attribute [rw] value
# The value of the attribute.
# @return [String]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/ListenerAttribute AWS API Documentation
#
class ListenerAttribute < Struct.new(
:key,
:value)
SENSITIVE = []
include Aws::Structure
end
# The specified listener does not exist.
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/ListenerNotFoundException AWS API Documentation
#
class ListenerNotFoundException < Aws::EmptyStructure; end
# Information about a load balancer.
#
# @!attribute [rw] load_balancer_arn
# The Amazon Resource Name (ARN) of the load balancer.
# @return [String]
#
# @!attribute [rw] dns_name
# The public DNS name of the load balancer.
# @return [String]
#
# @!attribute [rw] canonical_hosted_zone_id
# The ID of the Amazon Route 53 hosted zone associated with the load
# balancer.
# @return [String]
#
# @!attribute [rw] created_time
# The date and time the load balancer was created.
# @return [Time]
#
# @!attribute [rw] load_balancer_name
# The name of the load balancer.
# @return [String]
#
# @!attribute [rw] scheme
# The nodes of an Internet-facing load balancer have public IP
# addresses. The DNS name of an Internet-facing load balancer is
# publicly resolvable to the public IP addresses of the nodes.
# Therefore, Internet-facing load balancers can route requests from
# clients over the internet.
#
# The nodes of an internal load balancer have only private IP
# addresses. The DNS name of an internal load balancer is publicly
# resolvable to the private IP addresses of the nodes. Therefore,
# internal load balancers can route requests only from clients with
# access to the VPC for the load balancer.
# @return [String]
#
# @!attribute [rw] vpc_id
# The ID of the VPC for the load balancer.
# @return [String]
#
# @!attribute [rw] state
# The state of the load balancer.
# @return [Types::LoadBalancerState]
#
# @!attribute [rw] type
# The type of load balancer.
# @return [String]
#
# @!attribute [rw] availability_zones
# The subnets for the load balancer.
# @return [Array<Types::AvailabilityZone>]
#
# @!attribute [rw] security_groups
# The IDs of the security groups for the load balancer.
# @return [Array<String>]
#
# @!attribute [rw] ip_address_type
# The type of IP addresses used for public or private connections by
# the subnets attached to your load balancer.
#
# \[Application Load Balancers\] The possible values are `ipv4` (IPv4
# addresses), `dualstack` (IPv4 and IPv6 addresses), and
# `dualstack-without-public-ipv4` (public IPv6 addresses and private
# IPv4 and IPv6 addresses).
#
# \[Network Load Balancers and Gateway Load Balancers\] The possible
# values are `ipv4` (IPv4 addresses) and `dualstack` (IPv4 and IPv6
# addresses).
# @return [String]
#
# @!attribute [rw] customer_owned_ipv_4_pool
# \[Application Load Balancers on Outposts\] The ID of the
# customer-owned address pool.
# @return [String]
#
# @!attribute [rw] enforce_security_group_inbound_rules_on_private_link_traffic
# Indicates whether to evaluate inbound security group rules for
# traffic sent to a Network Load Balancer through Amazon Web Services
# PrivateLink.
# @return [String]
#
# @!attribute [rw] enable_prefix_for_ipv_6_source_nat
# \[Network Load Balancers with UDP listeners\] Indicates whether to
# use an IPv6 prefix from each subnet for source NAT. The IP address
# type must be `dualstack`. The default value is `off`.
# @return [String]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/LoadBalancer AWS API Documentation
#
class LoadBalancer < Struct.new(
:load_balancer_arn,
:dns_name,
:canonical_hosted_zone_id,
:created_time,
:load_balancer_name,
:scheme,
:vpc_id,
:state,
:type,
:availability_zones,
:security_groups,
:ip_address_type,
:customer_owned_ipv_4_pool,
:enforce_security_group_inbound_rules_on_private_link_traffic,
:enable_prefix_for_ipv_6_source_nat)
SENSITIVE = []
include Aws::Structure
end
# Information about a static IP address for a load balancer.
#
# @!attribute [rw] ip_address
# The static IP address.
# @return [String]
#
# @!attribute [rw] allocation_id
# \[Network Load Balancers\] The allocation ID of the Elastic IP
# address for an internal-facing load balancer.
# @return [String]
#
# @!attribute [rw] private_i_pv_4_address
# \[Network Load Balancers\] The private IPv4 address for an internal
# load balancer.
# @return [String]
#
# @!attribute [rw] i_pv_6_address
# \[Network Load Balancers\] The IPv6 address.
# @return [String]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/LoadBalancerAddress AWS API Documentation
#
class LoadBalancerAddress < Struct.new(
:ip_address,
:allocation_id,
:private_i_pv_4_address,
:i_pv_6_address)
SENSITIVE = []
include Aws::Structure
end
# Information about a load balancer attribute.
#
# @!attribute [rw] key
# The name of the attribute.
#
# The following attributes are supported by all load balancers:
#
# * `deletion_protection.enabled` - Indicates whether deletion
# protection is enabled. The value is `true` or `false`. The default
# is `false`.
#
# * `load_balancing.cross_zone.enabled` - Indicates whether cross-zone
# load balancing is enabled. The possible values are `true` and
# `false`. The default for Network Load Balancers and Gateway Load
# Balancers is `false`. The default for Application Load Balancers
# is `true`, and can't be changed.
#
# The following attributes are supported by both Application Load
# Balancers and Network Load Balancers:
#
# * `access_logs.s3.enabled` - Indicates whether access logs are
# enabled. The value is `true` or `false`. The default is `false`.
#
# * `access_logs.s3.bucket` - The name of the S3 bucket for the access
# logs. This attribute is required if access logs are enabled. The
# bucket must exist in the same region as the load balancer and have
# a bucket policy that grants Elastic Load Balancing permissions to
# write to the bucket.
#
# * `access_logs.s3.prefix` - The prefix for the location in the S3
# bucket for the access logs.
#
# * `ipv6.deny_all_igw_traffic` - Blocks internet gateway (IGW) access
# to the load balancer. It is set to `false` for internet-facing
# load balancers and `true` for internal load balancers, preventing
# unintended access to your internal load balancer through an
# internet gateway.
#
# The following attributes are supported by only Application Load
# Balancers:
#
# * `idle_timeout.timeout_seconds` - The idle timeout value, in
# seconds. The valid range is 1-4000 seconds. The default is 60
# seconds.
#
# * `client_keep_alive.seconds` - The client keep alive value, in
# seconds. The valid range is 60-604800 seconds. The default is 3600
# seconds.
#
# * `connection_logs.s3.enabled` - Indicates whether connection logs
# are enabled. The value is `true` or `false`. The default is
# `false`.
#
# * `connection_logs.s3.bucket` - The name of the S3 bucket for the
# connection logs. This attribute is required if connection logs are
# enabled. The bucket must exist in the same region as the load
# balancer and have a bucket policy that grants Elastic Load
# Balancing permissions to write to the bucket.
#
# * `connection_logs.s3.prefix` - The prefix for the location in the
# S3 bucket for the connection logs.
#
# * `routing.http.desync_mitigation_mode` - Determines how the load
# balancer handles requests that might pose a security risk to your
# application. The possible values are `monitor`, `defensive`, and
# `strictest`. The default is `defensive`.
#
# * `routing.http.drop_invalid_header_fields.enabled` - Indicates
# whether HTTP headers with invalid header fields are removed by the
# load balancer (`true`) or routed to targets (`false`). The default
# is `false`.
#
# * `routing.http.preserve_host_header.enabled` - Indicates whether
# the Application Load Balancer should preserve the `Host` header in
# the HTTP request and send it to the target without any change. The
# possible values are `true` and `false`. The default is `false`.
#
# * `routing.http.x_amzn_tls_version_and_cipher_suite.enabled` -
# Indicates whether the two headers (`x-amzn-tls-version` and
# `x-amzn-tls-cipher-suite`), which contain information about the
# negotiated TLS version and cipher suite, are added to the client
# request before sending it to the target. The `x-amzn-tls-version`
# header has information about the TLS protocol version negotiated
# with the client, and the `x-amzn-tls-cipher-suite` header has
# information about the cipher suite negotiated with the client.
# Both headers are in OpenSSL format. The possible values for the
# attribute are `true` and `false`. The default is `false`.
#
# * `routing.http.xff_client_port.enabled` - Indicates whether the
# `X-Forwarded-For` header should preserve the source port that the
# client used to connect to the load balancer. The possible values
# are `true` and `false`. The default is `false`.
#
# * `routing.http.xff_header_processing.mode` - Enables you to modify,
# preserve, or remove the `X-Forwarded-For` header in the HTTP
# request before the Application Load Balancer sends the request to
# the target. The possible values are `append`, `preserve`, and
# `remove`. The default is `append`.
#
# * If the value is `append`, the Application Load Balancer adds the
# client IP address (of the last hop) to the `X-Forwarded-For`
# header in the HTTP request before it sends it to targets.
#
# * If the value is `preserve` the Application Load Balancer
# preserves the `X-Forwarded-For` header in the HTTP request, and
# sends it to targets without any change.
#
# * If the value is `remove`, the Application Load Balancer removes
# the `X-Forwarded-For` header in the HTTP request before it sends
# it to targets.
#
# * `routing.http2.enabled` - Indicates whether HTTP/2 is enabled. The
# possible values are `true` and `false`. The default is `true`.
# Elastic Load Balancing requires that message header names contain
# only alphanumeric characters and hyphens.
#
# * `waf.fail_open.enabled` - Indicates whether to allow a WAF-enabled
# load balancer to route requests to targets if it is unable to
# forward the request to Amazon Web Services WAF. The possible
# values are `true` and `false`. The default is `false`.
#
# The following attributes are supported by only Network Load
# Balancers:
#
# * `dns_record.client_routing_policy` - Indicates how traffic is
# distributed among the load balancer Availability Zones. The
# possible values are `availability_zone_affinity` with 100 percent
# zonal affinity, `partial_availability_zone_affinity` with 85
# percent zonal affinity, and `any_availability_zone` with 0 percent
# zonal affinity.
#
# * `zonal_shift.config.enabled` - Indicates whether zonal shift is
# enabled. The possible values are `true` and `false`. The default
# is `false`.
# @return [String]
#
# @!attribute [rw] value
# The value of the attribute.
# @return [String]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/LoadBalancerAttribute AWS API Documentation
#
class LoadBalancerAttribute < Struct.new(
:key,
:value)
SENSITIVE = []
include Aws::Structure
end
# The specified load balancer does not exist.
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/LoadBalancerNotFoundException AWS API Documentation
#
class LoadBalancerNotFoundException < Aws::EmptyStructure; end
# Information about the state of the load balancer.
#
# @!attribute [rw] code
# The state code. The initial state of the load balancer is
# `provisioning`. After the load balancer is fully set up and ready to
# route traffic, its state is `active`. If load balancer is routing
# traffic but does not have the resources it needs to scale, its state
# is`active_impaired`. If the load balancer could not be set up, its
# state is `failed`.
# @return [String]
#
# @!attribute [rw] reason
# A description of the state.
# @return [String]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/LoadBalancerState AWS API Documentation
#
class LoadBalancerState < Struct.new(
:code,
:reason)
SENSITIVE = []
include Aws::Structure
end
# The codes to use when checking for a successful response from a
# target. If the protocol version is gRPC, these are gRPC codes.
# Otherwise, these are HTTP codes.
#
# @!attribute [rw] http_code
# For Application Load Balancers, you can specify values between 200
# and 499, with the default value being 200. You can specify multiple
# values (for example, "200,202") or a range of values (for example,
# "200-299").
#
# For Network Load Balancers, you can specify values between 200 and
# 599, with the default value being 200-399. You can specify multiple
# values (for example, "200,202") or a range of values (for example,
# "200-299").
#
# For Gateway Load Balancers, this must be "200–399".
#
# Note that when using shorthand syntax, some values such as commas
# need to be escaped.
# @return [String]
#
# @!attribute [rw] grpc_code
# You can specify values between 0 and 99. You can specify multiple
# values (for example, "0,1") or a range of values (for example,
# "0-5"). The default value is 12.
# @return [String]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/Matcher AWS API Documentation
#
class Matcher < Struct.new(
:http_code,
:grpc_code)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] listener_arn
# The Amazon Resource Name (ARN) of the listener.
# @return [String]
#
# @!attribute [rw] attributes
# The listener attributes.
# @return [Array<Types::ListenerAttribute>]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/ModifyListenerAttributesInput AWS API Documentation
#
class ModifyListenerAttributesInput < Struct.new(
:listener_arn,
:attributes)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] attributes
# Information about the listener attributes.
# @return [Array<Types::ListenerAttribute>]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/ModifyListenerAttributesOutput AWS API Documentation
#
class ModifyListenerAttributesOutput < Struct.new(
:attributes)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] listener_arn
# The Amazon Resource Name (ARN) of the listener.
# @return [String]
#
# @!attribute [rw] port
# The port for connections from clients to the load balancer. You
# can't specify a port for a Gateway Load Balancer.
# @return [Integer]
#
# @!attribute [rw] protocol
# The protocol for connections from clients to the load balancer.
# Application Load Balancers support the HTTP and HTTPS protocols.
# Network Load Balancers support the TCP, TLS, UDP, and TCP\_UDP
# protocols. You can’t change the protocol to UDP or TCP\_UDP if
# dual-stack mode is enabled. You can't specify a protocol for a
# Gateway Load Balancer.
# @return [String]
#
# @!attribute [rw] ssl_policy
# \[HTTPS and TLS listeners\] The security policy that defines which
# protocols and ciphers are supported.
#
# For more information, see [Security policies][1] in the *Application
# Load Balancers Guide* or [Security policies][2] in the *Network Load
# Balancers Guide*.
#
#
#
# [1]: https://docs.aws.amazon.com/elasticloadbalancing/latest/application/create-https-listener.html#describe-ssl-policies
# [2]: https://docs.aws.amazon.com/elasticloadbalancing/latest/network/create-tls-listener.html#describe-ssl-policies
# @return [String]
#
# @!attribute [rw] certificates
# \[HTTPS and TLS listeners\] The default certificate for the
# listener. You must provide exactly one certificate. Set
# `CertificateArn` to the certificate ARN but do not set `IsDefault`.
# @return [Array<Types::Certificate>]
#
# @!attribute [rw] default_actions
# The actions for the default rule.
# @return [Array<Types::Action>]
#
# @!attribute [rw] alpn_policy
# \[TLS listeners\] The name of the Application-Layer Protocol
# Negotiation (ALPN) policy. You can specify one policy name. The
# following are the possible values:
#
# * `HTTP1Only`
#
# * `HTTP2Only`
#
# * `HTTP2Optional`
#
# * `HTTP2Preferred`
#
# * `None`
#
# For more information, see [ALPN policies][1] in the *Network Load
# Balancers Guide*.
#
#
#
# [1]: https://docs.aws.amazon.com/elasticloadbalancing/latest/network/create-tls-listener.html#alpn-policies
# @return [Array<String>]
#
# @!attribute [rw] mutual_authentication
# The mutual authentication configuration information.
# @return [Types::MutualAuthenticationAttributes]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/ModifyListenerInput AWS API Documentation
#
class ModifyListenerInput < Struct.new(
:listener_arn,
:port,
:protocol,
:ssl_policy,
:certificates,
:default_actions,
:alpn_policy,
:mutual_authentication)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] listeners
# Information about the modified listener.
# @return [Array<Types::Listener>]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/ModifyListenerOutput AWS API Documentation
#
class ModifyListenerOutput < Struct.new(
:listeners)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] load_balancer_arn
# The Amazon Resource Name (ARN) of the load balancer.
# @return [String]
#
# @!attribute [rw] attributes
# The load balancer attributes.
# @return [Array<Types::LoadBalancerAttribute>]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/ModifyLoadBalancerAttributesInput AWS API Documentation
#
class ModifyLoadBalancerAttributesInput < Struct.new(
:load_balancer_arn,
:attributes)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] attributes
# Information about the load balancer attributes.
# @return [Array<Types::LoadBalancerAttribute>]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/ModifyLoadBalancerAttributesOutput AWS API Documentation
#
class ModifyLoadBalancerAttributesOutput < Struct.new(
:attributes)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] rule_arn
# The Amazon Resource Name (ARN) of the rule.
# @return [String]
#
# @!attribute [rw] conditions
# The conditions.
# @return [Array<Types::RuleCondition>]
#
# @!attribute [rw] actions
# The actions.
# @return [Array<Types::Action>]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/ModifyRuleInput AWS API Documentation
#
class ModifyRuleInput < Struct.new(
:rule_arn,
:conditions,
:actions)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] rules
# Information about the modified rule.
# @return [Array<Types::Rule>]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/ModifyRuleOutput AWS API Documentation
#
class ModifyRuleOutput < Struct.new(
:rules)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] target_group_arn
# The Amazon Resource Name (ARN) of the target group.
# @return [String]
#
# @!attribute [rw] attributes
# The target group attributes.
# @return [Array<Types::TargetGroupAttribute>]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/ModifyTargetGroupAttributesInput AWS API Documentation
#
class ModifyTargetGroupAttributesInput < Struct.new(
:target_group_arn,
:attributes)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] attributes
# Information about the target group attributes.
# @return [Array<Types::TargetGroupAttribute>]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/ModifyTargetGroupAttributesOutput AWS API Documentation
#
class ModifyTargetGroupAttributesOutput < Struct.new(
:attributes)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] target_group_arn
# The Amazon Resource Name (ARN) of the target group.
# @return [String]
#
# @!attribute [rw] health_check_protocol
# The protocol the load balancer uses when performing health checks on
# targets. For Application Load Balancers, the default is HTTP. For
# Network Load Balancers and Gateway Load Balancers, the default is
# TCP. The TCP protocol is not supported for health checks if the
# protocol of the target group is HTTP or HTTPS. It is supported for
# health checks only if the protocol of the target group is TCP, TLS,
# UDP, or TCP\_UDP. The GENEVE, TLS, UDP, and TCP\_UDP protocols are
# not supported for health checks.
# @return [String]
#
# @!attribute [rw] health_check_port
# The port the load balancer uses when performing health checks on
# targets.
# @return [String]
#
# @!attribute [rw] health_check_path
# \[HTTP/HTTPS health checks\] The destination for health checks on
# the targets.
#
# \[HTTP1 or HTTP2 protocol version\] The ping path. The default is /.
#
# \[GRPC protocol version\] The path of a custom health check method
# with the format /package.service/method. The default is /Amazon Web
# Services.ALB/healthcheck.
# @return [String]
#
# @!attribute [rw] health_check_enabled
# Indicates whether health checks are enabled.
# @return [Boolean]
#
# @!attribute [rw] health_check_interval_seconds
# The approximate amount of time, in seconds, between health checks of
# an individual target.
# @return [Integer]
#
# @!attribute [rw] health_check_timeout_seconds
# \[HTTP/HTTPS health checks\] The amount of time, in seconds, during
# which no response means a failed health check.
# @return [Integer]
#
# @!attribute [rw] healthy_threshold_count
# The number of consecutive health checks successes required before
# considering an unhealthy target healthy.
# @return [Integer]
#
# @!attribute [rw] unhealthy_threshold_count
# The number of consecutive health check failures required before
# considering the target unhealthy.
# @return [Integer]
#
# @!attribute [rw] matcher
# \[HTTP/HTTPS health checks\] The HTTP or gRPC codes to use when
# checking for a successful response from a target. For target groups
# with a protocol of TCP, TCP\_UDP, UDP or TLS the range is 200-599.
# For target groups with a protocol of HTTP or HTTPS, the range is
# 200-499. For target groups with a protocol of GENEVE, the range is
# 200-399.
# @return [Types::Matcher]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/ModifyTargetGroupInput AWS API Documentation
#
class ModifyTargetGroupInput < Struct.new(
:target_group_arn,
:health_check_protocol,
:health_check_port,
:health_check_path,
:health_check_enabled,
:health_check_interval_seconds,
:health_check_timeout_seconds,
:healthy_threshold_count,
:unhealthy_threshold_count,
:matcher)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] target_groups
# Information about the modified target group.
# @return [Array<Types::TargetGroup>]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/ModifyTargetGroupOutput AWS API Documentation
#
class ModifyTargetGroupOutput < Struct.new(
:target_groups)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] trust_store_arn
# The Amazon Resource Name (ARN) of the trust store.
# @return [String]
#
# @!attribute [rw] ca_certificates_bundle_s3_bucket
# The Amazon S3 bucket for the ca certificates bundle.
# @return [String]
#
# @!attribute [rw] ca_certificates_bundle_s3_key
# The Amazon S3 path for the ca certificates bundle.
# @return [String]
#
# @!attribute [rw] ca_certificates_bundle_s3_object_version
# The Amazon S3 object version for the ca certificates bundle. If
# undefined the current version is used.
# @return [String]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/ModifyTrustStoreInput AWS API Documentation
#
class ModifyTrustStoreInput < Struct.new(
:trust_store_arn,
:ca_certificates_bundle_s3_bucket,
:ca_certificates_bundle_s3_key,
:ca_certificates_bundle_s3_object_version)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] trust_stores
# Information about the modified trust store.
# @return [Array<Types::TrustStore>]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/ModifyTrustStoreOutput AWS API Documentation
#
class ModifyTrustStoreOutput < Struct.new(
:trust_stores)
SENSITIVE = []
include Aws::Structure
end
# Information about the mutual authentication attributes of a listener.
#
# @!attribute [rw] mode
# The client certificate handling method. Options are `off`,
# `passthrough` or `verify`. The default value is `off`.
# @return [String]
#
# @!attribute [rw] trust_store_arn
# The Amazon Resource Name (ARN) of the trust store.
# @return [String]
#
# @!attribute [rw] ignore_client_certificate_expiry
# Indicates whether expired client certificates are ignored.
# @return [Boolean]
#
# @!attribute [rw] trust_store_association_status
# Indicates a shared trust stores association status.
# @return [String]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/MutualAuthenticationAttributes AWS API Documentation
#
class MutualAuthenticationAttributes < Struct.new(
:mode,
:trust_store_arn,
:ignore_client_certificate_expiry,
:trust_store_association_status)
SENSITIVE = []
include Aws::Structure
end
# This operation is not allowed.
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/OperationNotPermittedException AWS API Documentation
#
class OperationNotPermittedException < Aws::EmptyStructure; end
# Information about a path pattern condition.
#
# @!attribute [rw] values
# The path patterns to compare against the request URL. The maximum
# size of each string is 128 characters. The comparison is case
# sensitive. The following wildcard characters are supported: *
# (matches 0 or more characters) and ? (matches exactly 1 character).
#
# If you specify multiple strings, the condition is satisfied if one
# of them matches the request URL. The path pattern is compared only
# to the path of the URL, not to its query string. To compare against
# the query string, use QueryStringConditionConfig.
# @return [Array<String>]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/PathPatternConditionConfig AWS API Documentation
#
class PathPatternConditionConfig < Struct.new(
:values)
SENSITIVE = []
include Aws::Structure
end
# The specified priority is in use.
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/PriorityInUseException AWS API Documentation
#
class PriorityInUseException < Aws::EmptyStructure; end
# Information about a query string condition.
#
# The query string component of a URI starts after the first '?'
# character and is terminated by either a '#' character or the end of
# the URI. A typical query string contains key/value pairs separated by
# '&' characters. The allowed characters are specified by RFC
# 3986. Any character can be percentage encoded.
#
# @!attribute [rw] values
# The key/value pairs or values to find in the query string. The
# maximum size of each string is 128 characters. The comparison is
# case insensitive. The following wildcard characters are supported:
# * (matches 0 or more characters) and ? (matches exactly 1
# character). To search for a literal '*' or '?' character in a
# query string, you must escape these characters in `Values` using a
# '\\' character.
#
# If you specify multiple key/value pairs or values, the condition is
# satisfied if one of them is found in the query string.
# @return [Array<Types::QueryStringKeyValuePair>]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/QueryStringConditionConfig AWS API Documentation
#
class QueryStringConditionConfig < Struct.new(
:values)
SENSITIVE = []
include Aws::Structure
end
# Information about a key/value pair.
#
# @!attribute [rw] key
# The key. You can omit the key.
# @return [String]
#
# @!attribute [rw] value
# The value.
# @return [String]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/QueryStringKeyValuePair AWS API Documentation
#
class QueryStringKeyValuePair < Struct.new(
:key,
:value)
SENSITIVE = []
include Aws::Structure
end
# Information about a redirect action.
#
# A URI consists of the following components:
# protocol://hostname:port/path?query. You must modify at least one of
# the following components to avoid a redirect loop: protocol, hostname,
# port, or path. Any components that you do not modify retain their
# original values.
#
# You can reuse URI components using the following reserved keywords:
#
# * \#\{protocol}
#
# * \#\{host}
#
# * \#\{port}
#
# * \#\{path} (the leading "/" is removed)
#
# * \#\{query}
#
# For example, you can change the path to "/new/#\{path}", the
# hostname to "example.#\{host}", or the query to
# "#\{query}&value=xyz".
#
# @!attribute [rw] protocol
# The protocol. You can specify HTTP, HTTPS, or #\{protocol}. You can
# redirect HTTP to HTTP, HTTP to HTTPS, and HTTPS to HTTPS. You can't
# redirect HTTPS to HTTP.
# @return [String]
#
# @!attribute [rw] port
# The port. You can specify a value from 1 to 65535 or #\{port}.
# @return [String]
#
# @!attribute [rw] host
# The hostname. This component is not percent-encoded. The hostname
# can contain #\{host}.
# @return [String]
#
# @!attribute [rw] path
# The absolute path, starting with the leading "/". This component
# is not percent-encoded. The path can contain #\{host}, #\{path}, and
# #\{port}.
# @return [String]
#
# @!attribute [rw] query
# The query parameters, URL-encoded when necessary, but not
# percent-encoded. Do not include the leading "?", as it is
# automatically added. You can specify any of the reserved keywords.
# @return [String]
#
# @!attribute [rw] status_code
# The HTTP redirect code. The redirect is either permanent (HTTP 301)
# or temporary (HTTP 302).
# @return [String]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/RedirectActionConfig AWS API Documentation
#
class RedirectActionConfig < Struct.new(
:protocol,
:port,
:host,
:path,
:query,
:status_code)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] target_group_arn
# The Amazon Resource Name (ARN) of the target group.
# @return [String]
#
# @!attribute [rw] targets
# The targets.
# @return [Array<Types::TargetDescription>]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/RegisterTargetsInput AWS API Documentation
#
class RegisterTargetsInput < Struct.new(
:target_group_arn,
:targets)
SENSITIVE = []
include Aws::Structure
end
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/RegisterTargetsOutput AWS API Documentation
#
class RegisterTargetsOutput < Aws::EmptyStructure; end
# @!attribute [rw] listener_arn
# The Amazon Resource Name (ARN) of the listener.
# @return [String]
#
# @!attribute [rw] certificates
# The certificate to remove. You can specify one certificate per call.
# Set `CertificateArn` to the certificate ARN but do not set
# `IsDefault`.
# @return [Array<Types::Certificate>]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/RemoveListenerCertificatesInput AWS API Documentation
#
class RemoveListenerCertificatesInput < Struct.new(
:listener_arn,
:certificates)
SENSITIVE = []
include Aws::Structure
end
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/RemoveListenerCertificatesOutput AWS API Documentation
#
class RemoveListenerCertificatesOutput < Aws::EmptyStructure; end
# @!attribute [rw] resource_arns
# The Amazon Resource Name (ARN) of the resource.
# @return [Array<String>]
#
# @!attribute [rw] tag_keys
# The tag keys for the tags to remove.
# @return [Array<String>]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/RemoveTagsInput AWS API Documentation
#
class RemoveTagsInput < Struct.new(
:resource_arns,
:tag_keys)
SENSITIVE = []
include Aws::Structure
end
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/RemoveTagsOutput AWS API Documentation
#
class RemoveTagsOutput < Aws::EmptyStructure; end
# @!attribute [rw] trust_store_arn
# The Amazon Resource Name (ARN) of the trust store.
# @return [String]
#
# @!attribute [rw] revocation_ids
# The revocation IDs of the revocation files you want to remove.
# @return [Array<Integer>]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/RemoveTrustStoreRevocationsInput AWS API Documentation
#
class RemoveTrustStoreRevocationsInput < Struct.new(
:trust_store_arn,
:revocation_ids)
SENSITIVE = []
include Aws::Structure
end
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/RemoveTrustStoreRevocationsOutput AWS API Documentation
#
class RemoveTrustStoreRevocationsOutput < Aws::EmptyStructure; end
# A specified resource is in use.
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/ResourceInUseException AWS API Documentation
#
class ResourceInUseException < Aws::EmptyStructure; end
# The specified resource does not exist.
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/ResourceNotFoundException AWS API Documentation
#
class ResourceNotFoundException < Aws::EmptyStructure; end
# Information about a revocation file.
#
# @!attribute [rw] s3_bucket
# The Amazon S3 bucket for the revocation file.
# @return [String]
#
# @!attribute [rw] s3_key
# The Amazon S3 path for the revocation file.
# @return [String]
#
# @!attribute [rw] s3_object_version
# The Amazon S3 object version of the revocation file.
# @return [String]
#
# @!attribute [rw] revocation_type
# The type of revocation file.
# @return [String]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/RevocationContent AWS API Documentation
#
class RevocationContent < Struct.new(
:s3_bucket,
:s3_key,
:s3_object_version,
:revocation_type)
SENSITIVE = []
include Aws::Structure
end
# The specified revocation file does not exist.
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/RevocationContentNotFoundException AWS API Documentation
#
class RevocationContentNotFoundException < Aws::EmptyStructure; end
# The specified revocation ID does not exist.
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/RevocationIdNotFoundException AWS API Documentation
#
class RevocationIdNotFoundException < Aws::EmptyStructure; end
# Information about a rule.
#
# @!attribute [rw] rule_arn
# The Amazon Resource Name (ARN) of the rule.
# @return [String]
#
# @!attribute [rw] priority
# The priority.
# @return [String]
#
# @!attribute [rw] conditions
# The conditions. Each rule can include zero or one of the following
# conditions: `http-request-method`, `host-header`, `path-pattern`,
# and `source-ip`, and zero or more of the following conditions:
# `http-header` and `query-string`.
# @return [Array<Types::RuleCondition>]
#
# @!attribute [rw] actions
# The actions. Each rule must include exactly one of the following
# types of actions: `forward`, `redirect`, or `fixed-response`, and it
# must be the last action to be performed.
# @return [Array<Types::Action>]
#
# @!attribute [rw] is_default
# Indicates whether this is the default rule.
# @return [Boolean]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/Rule AWS API Documentation
#
class Rule < Struct.new(
:rule_arn,
:priority,
:conditions,
:actions,
:is_default)
SENSITIVE = []
include Aws::Structure
end
# Information about a condition for a rule.
#
# Each rule can optionally include up to one of each of the following
# conditions: `http-request-method`, `host-header`, `path-pattern`, and
# `source-ip`. Each rule can also optionally include one or more of each
# of the following conditions: `http-header` and `query-string`. Note
# that the value for a condition can't be empty.
#
# For more information, see [Quotas for your Application Load
# Balancers][1].
#
#
#
# [1]: https://docs.aws.amazon.com/elasticloadbalancing/latest/application/load-balancer-limits.html
#
# @!attribute [rw] field
# The field in the HTTP request. The following are the possible
# values:
#
# * `http-header`
#
# * `http-request-method`
#
# * `host-header`
#
# * `path-pattern`
#
# * `query-string`
#
# * `source-ip`
# @return [String]
#
# @!attribute [rw] values
# The condition value. Specify only when `Field` is `host-header` or
# `path-pattern`. Alternatively, to specify multiple host names or
# multiple path patterns, use `HostHeaderConfig` or
# `PathPatternConfig`.
#
# If `Field` is `host-header` and you are not using
# `HostHeaderConfig`, you can specify a single host name (for example,
# my.example.com) in `Values`. A host name is case insensitive, can be
# up to 128 characters in length, and can contain any of the following
# characters.
#
# * A-Z, a-z, 0-9
#
# * \- .
#
# * * (matches 0 or more characters)
#
# * ? (matches exactly 1 character)
#
# If `Field` is `path-pattern` and you are not using
# `PathPatternConfig`, you can specify a single path pattern (for
# example, /img/*) in `Values`. A path pattern is case-sensitive, can
# be up to 128 characters in length, and can contain any of the
# following characters.
#
# * A-Z, a-z, 0-9
#
# * \_ - . $ / ~ " ' @ : +
#
# * & (using &amp;)
#
# * * (matches 0 or more characters)
#
# * ? (matches exactly 1 character)
# @return [Array<String>]
#
# @!attribute [rw] host_header_config
# Information for a host header condition. Specify only when `Field`
# is `host-header`.
# @return [Types::HostHeaderConditionConfig]
#
# @!attribute [rw] path_pattern_config
# Information for a path pattern condition. Specify only when `Field`
# is `path-pattern`.
# @return [Types::PathPatternConditionConfig]
#
# @!attribute [rw] http_header_config
# Information for an HTTP header condition. Specify only when `Field`
# is `http-header`.
# @return [Types::HttpHeaderConditionConfig]
#
# @!attribute [rw] query_string_config
# Information for a query string condition. Specify only when `Field`
# is `query-string`.
# @return [Types::QueryStringConditionConfig]
#
# @!attribute [rw] http_request_method_config
# Information for an HTTP method condition. Specify only when `Field`
# is `http-request-method`.
# @return [Types::HttpRequestMethodConditionConfig]
#
# @!attribute [rw] source_ip_config
# Information for a source IP condition. Specify only when `Field` is
# `source-ip`.
# @return [Types::SourceIpConditionConfig]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/RuleCondition AWS API Documentation
#
class RuleCondition < Struct.new(
:field,
:values,
:host_header_config,
:path_pattern_config,
:http_header_config,
:query_string_config,
:http_request_method_config,
:source_ip_config)
SENSITIVE = []
include Aws::Structure
end
# The specified rule does not exist.
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/RuleNotFoundException AWS API Documentation
#
class RuleNotFoundException < Aws::EmptyStructure; end
# Information about the priorities for the rules for a listener.
#
# @!attribute [rw] rule_arn
# The Amazon Resource Name (ARN) of the rule.
# @return [String]
#
# @!attribute [rw] priority
# The rule priority.
# @return [Integer]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/RulePriorityPair AWS API Documentation
#
class RulePriorityPair < Struct.new(
:rule_arn,
:priority)
SENSITIVE = []
include Aws::Structure
end
# The specified SSL policy does not exist.
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/SSLPolicyNotFoundException AWS API Documentation
#
class SSLPolicyNotFoundException < Aws::EmptyStructure; end
# @!attribute [rw] load_balancer_arn
# The Amazon Resource Name (ARN) of the load balancer.
# @return [String]
#
# @!attribute [rw] ip_address_type
# The IP address type. Internal load balancers must use `ipv4`.
#
# \[Application Load Balancers\] The possible values are `ipv4` (IPv4
# addresses), `dualstack` (IPv4 and IPv6 addresses), and
# `dualstack-without-public-ipv4` (public IPv6 addresses and private
# IPv4 and IPv6 addresses).
#
# Application Load Balancer authentication supports IPv4 addresses
# only when connecting to an Identity Provider (IdP) or Amazon Cognito
# endpoint. Without a public IPv4 address the load balancer can't
# complete the authentication process, resulting in HTTP 500 errors.
#
# \[Network Load Balancers and Gateway Load Balancers\] The possible
# values are `ipv4` (IPv4 addresses) and `dualstack` (IPv4 and IPv6
# addresses).
# @return [String]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/SetIpAddressTypeInput AWS API Documentation
#
class SetIpAddressTypeInput < Struct.new(
:load_balancer_arn,
:ip_address_type)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] ip_address_type
# The IP address type.
# @return [String]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/SetIpAddressTypeOutput AWS API Documentation
#
class SetIpAddressTypeOutput < Struct.new(
:ip_address_type)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] rule_priorities
# The rule priorities.
# @return [Array<Types::RulePriorityPair>]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/SetRulePrioritiesInput AWS API Documentation
#
class SetRulePrioritiesInput < Struct.new(
:rule_priorities)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] rules
# Information about the rules.
# @return [Array<Types::Rule>]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/SetRulePrioritiesOutput AWS API Documentation
#
class SetRulePrioritiesOutput < Struct.new(
:rules)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] load_balancer_arn
# The Amazon Resource Name (ARN) of the load balancer.
# @return [String]
#
# @!attribute [rw] security_groups
# The IDs of the security groups.
# @return [Array<String>]
#
# @!attribute [rw] enforce_security_group_inbound_rules_on_private_link_traffic
# Indicates whether to evaluate inbound security group rules for
# traffic sent to a Network Load Balancer through Amazon Web Services
# PrivateLink. The default is `on`.
# @return [String]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/SetSecurityGroupsInput AWS API Documentation
#
class SetSecurityGroupsInput < Struct.new(
:load_balancer_arn,
:security_groups,
:enforce_security_group_inbound_rules_on_private_link_traffic)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] security_group_ids
# The IDs of the security groups associated with the load balancer.
# @return [Array<String>]
#
# @!attribute [rw] enforce_security_group_inbound_rules_on_private_link_traffic
# Indicates whether to evaluate inbound security group rules for
# traffic sent to a Network Load Balancer through Amazon Web Services
# PrivateLink.
# @return [String]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/SetSecurityGroupsOutput AWS API Documentation
#
class SetSecurityGroupsOutput < Struct.new(
:security_group_ids,
:enforce_security_group_inbound_rules_on_private_link_traffic)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] load_balancer_arn
# The Amazon Resource Name (ARN) of the load balancer.
# @return [String]
#
# @!attribute [rw] subnets
# The IDs of the public subnets. You can specify only one subnet per
# Availability Zone. You must specify either subnets or subnet
# mappings.
#
# \[Application Load Balancers\] You must specify subnets from at
# least two Availability Zones.
#
# \[Application Load Balancers on Outposts\] You must specify one
# Outpost subnet.
#
# \[Application Load Balancers on Local Zones\] You can specify
# subnets from one or more Local Zones.
#
# \[Network Load Balancers and Gateway Load Balancers\] You can
# specify subnets from one or more Availability Zones.
# @return [Array<String>]
#
# @!attribute [rw] subnet_mappings
# The IDs of the public subnets. You can specify only one subnet per
# Availability Zone. You must specify either subnets or subnet
# mappings.
#
# \[Application Load Balancers\] You must specify subnets from at
# least two Availability Zones. You can't specify Elastic IP
# addresses for your subnets.
#
# \[Application Load Balancers on Outposts\] You must specify one
# Outpost subnet.
#
# \[Application Load Balancers on Local Zones\] You can specify
# subnets from one or more Local Zones.
#
# \[Network Load Balancers\] You can specify subnets from one or more
# Availability Zones. You can specify one Elastic IP address per
# subnet if you need static IP addresses for your internet-facing load
# balancer. For internal load balancers, you can specify one private
# IP address per subnet from the IPv4 range of the subnet. For
# internet-facing load balancer, you can specify one IPv6 address per
# subnet.
#
# \[Gateway Load Balancers\] You can specify subnets from one or more
# Availability Zones.
# @return [Array<Types::SubnetMapping>]
#
# @!attribute [rw] ip_address_type
# The IP address type.
#
# \[Application Load Balancers\] The possible values are `ipv4` (IPv4
# addresses), `dualstack` (IPv4 and IPv6 addresses), and
# `dualstack-without-public-ipv4` (public IPv6 addresses and private
# IPv4 and IPv6 addresses).
#
# \[Network Load Balancers and Gateway Load Balancers\] The possible
# values are `ipv4` (IPv4 addresses) and `dualstack` (IPv4 and IPv6
# addresses).
# @return [String]
#
# @!attribute [rw] enable_prefix_for_ipv_6_source_nat
# \[Network Load Balancers with UDP listeners\] Indicates whether to
# use an IPv6 prefix from each subnet for source NAT. The IP address
# type must be `dualstack`. The default value is `off`.
# @return [String]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/SetSubnetsInput AWS API Documentation
#
class SetSubnetsInput < Struct.new(
:load_balancer_arn,
:subnets,
:subnet_mappings,
:ip_address_type,
:enable_prefix_for_ipv_6_source_nat)
SENSITIVE = []
include Aws::Structure
end
# @!attribute [rw] availability_zones
# Information about the subnets.
# @return [Array<Types::AvailabilityZone>]
#
# @!attribute [rw] ip_address_type
# The IP address type.
# @return [String]
#
# @!attribute [rw] enable_prefix_for_ipv_6_source_nat
# \[Network Load Balancers\] Indicates whether to use an IPv6 prefix
# from each subnet for source NAT.
# @return [String]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/SetSubnetsOutput AWS API Documentation
#
class SetSubnetsOutput < Struct.new(
:availability_zones,
:ip_address_type,
:enable_prefix_for_ipv_6_source_nat)
SENSITIVE = []
include Aws::Structure
end
# Information about a source IP condition.
#
# You can use this condition to route based on the IP address of the
# source that connects to the load balancer. If a client is behind a
# proxy, this is the IP address of the proxy not the IP address of the
# client.
#
# @!attribute [rw] values
# The source IP addresses, in CIDR format. You can use both IPv4 and
# IPv6 addresses. Wildcards are not supported.
#
# If you specify multiple addresses, the condition is satisfied if the
# source IP address of the request matches one of the CIDR blocks.
# This condition is not satisfied by the addresses in the
# X-Forwarded-For header. To search for addresses in the
# X-Forwarded-For header, use HttpHeaderConditionConfig.
#
# The total number of values must be less than, or equal to five.
# @return [Array<String>]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/SourceIpConditionConfig AWS API Documentation
#
class SourceIpConditionConfig < Struct.new(
:values)
SENSITIVE = []
include Aws::Structure
end
# Information about a policy used for SSL negotiation.
#
# @!attribute [rw] ssl_protocols
# The protocols.
# @return [Array<String>]
#
# @!attribute [rw] ciphers
# The ciphers.
# @return [Array<Types::Cipher>]
#
# @!attribute [rw] name
# The name of the policy.
# @return [String]
#
# @!attribute [rw] supported_load_balancer_types
# The supported load balancers.
# @return [Array<String>]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/SslPolicy AWS API Documentation
#
class SslPolicy < Struct.new(
:ssl_protocols,
:ciphers,
:name,
:supported_load_balancer_types)
SENSITIVE = []
include Aws::Structure
end
# Information about a subnet mapping.
#
# @!attribute [rw] subnet_id
# The ID of the subnet.
# @return [String]
#
# @!attribute [rw] allocation_id
# \[Network Load Balancers\] The allocation ID of the Elastic IP
# address for an internet-facing load balancer.
# @return [String]
#
# @!attribute [rw] private_i_pv_4_address
# \[Network Load Balancers\] The private IPv4 address for an internal
# load balancer.
# @return [String]
#
# @!attribute [rw] i_pv_6_address
# \[Network Load Balancers\] The IPv6 address.
# @return [String]
#
# @!attribute [rw] source_nat_ipv_6_prefix
# \[Network Load Balancers with UDP listeners\] The IPv6 prefix to use
# for source NAT. Specify an IPv6 prefix (/80 netmask) from the subnet
# CIDR block or `auto_assigned` to use an IPv6 prefix selected at
# random from the subnet CIDR block.
# @return [String]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/SubnetMapping AWS API Documentation
#
class SubnetMapping < Struct.new(
:subnet_id,
:allocation_id,
:private_i_pv_4_address,
:i_pv_6_address,
:source_nat_ipv_6_prefix)
SENSITIVE = []
include Aws::Structure
end
# The specified subnet does not exist.
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/SubnetNotFoundException AWS API Documentation
#
class SubnetNotFoundException < Aws::EmptyStructure; end
# Information about a tag.
#
# @!attribute [rw] key
# The key of the tag.
# @return [String]
#
# @!attribute [rw] value
# The value of the tag.
# @return [String]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/Tag AWS API Documentation
#
class Tag < Struct.new(
:key,
:value)
SENSITIVE = []
include Aws::Structure
end
# The tags associated with a resource.
#
# @!attribute [rw] resource_arn
# The Amazon Resource Name (ARN) of the resource.
# @return [String]
#
# @!attribute [rw] tags
# Information about the tags.
# @return [Array<Types::Tag>]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/TagDescription AWS API Documentation
#
class TagDescription < Struct.new(
:resource_arn,
:tags)
SENSITIVE = []
include Aws::Structure
end
# Information about a target.
#
# @!attribute [rw] id
# The ID of the target. If the target type of the target group is
# `instance`, specify an instance ID. If the target type is `ip`,
# specify an IP address. If the target type is `lambda`, specify the
# ARN of the Lambda function. If the target type is `alb`, specify the
# ARN of the Application Load Balancer target.
# @return [String]
#
# @!attribute [rw] port
# The port on which the target is listening. If the target group
# protocol is GENEVE, the supported port is 6081. If the target type
# is `alb`, the targeted Application Load Balancer must have at least
# one listener whose port matches the target group port. This
# parameter is not used if the target is a Lambda function.
# @return [Integer]
#
# @!attribute [rw] availability_zone
# An Availability Zone or `all`. This determines whether the target
# receives traffic from the load balancer nodes in the specified
# Availability Zone or from all enabled Availability Zones for the
# load balancer.
#
# For Application Load Balancer target groups, the specified
# Availability Zone value is only applicable when cross-zone load
# balancing is off. Otherwise the parameter is ignored and treated as
# `all`.
#
# This parameter is not supported if the target type of the target
# group is `instance` or `alb`.
#
# If the target type is `ip` and the IP address is in a subnet of the
# VPC for the target group, the Availability Zone is automatically
# detected and this parameter is optional. If the IP address is
# outside the VPC, this parameter is required.
#
# For Application Load Balancer target groups with cross-zone load
# balancing off, if the target type is `ip` and the IP address is
# outside of the VPC for the target group, this should be an
# Availability Zone inside the VPC for the target group.
#
# If the target type is `lambda`, this parameter is optional and the
# only supported value is `all`.
# @return [String]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/TargetDescription AWS API Documentation
#
class TargetDescription < Struct.new(
:id,
:port,
:availability_zone)
SENSITIVE = []
include Aws::Structure
end
# Information about a target group.
#
# @!attribute [rw] target_group_arn
# The Amazon Resource Name (ARN) of the target group.
# @return [String]
#
# @!attribute [rw] target_group_name
# The name of the target group.
# @return [String]
#
# @!attribute [rw] protocol
# The protocol to use for routing traffic to the targets.
# @return [String]
#
# @!attribute [rw] port
# The port on which the targets are listening. This parameter is not
# used if the target is a Lambda function.
# @return [Integer]
#
# @!attribute [rw] vpc_id
# The ID of the VPC for the targets.
# @return [String]
#
# @!attribute [rw] health_check_protocol
# The protocol to use to connect with the target. The GENEVE, TLS,
# UDP, and TCP\_UDP protocols are not supported for health checks.
# @return [String]
#
# @!attribute [rw] health_check_port
# The port to use to connect with the target.
# @return [String]
#
# @!attribute [rw] health_check_enabled
# Indicates whether health checks are enabled.
# @return [Boolean]
#
# @!attribute [rw] health_check_interval_seconds
# The approximate amount of time, in seconds, between health checks of
# an individual target.
# @return [Integer]
#
# @!attribute [rw] health_check_timeout_seconds
# The amount of time, in seconds, during which no response means a
# failed health check.
# @return [Integer]
#
# @!attribute [rw] healthy_threshold_count
# The number of consecutive health checks successes required before
# considering an unhealthy target healthy.
# @return [Integer]
#
# @!attribute [rw] unhealthy_threshold_count
# The number of consecutive health check failures required before
# considering the target unhealthy.
# @return [Integer]
#
# @!attribute [rw] health_check_path
# The destination for health checks on the targets.
# @return [String]
#
# @!attribute [rw] matcher
# The HTTP or gRPC codes to use when checking for a successful
# response from a target.
# @return [Types::Matcher]
#
# @!attribute [rw] load_balancer_arns
# The Amazon Resource Name (ARN) of the load balancer that routes
# traffic to this target group. You can use each target group with
# only one load balancer.
# @return [Array<String>]
#
# @!attribute [rw] target_type
# The type of target that you must specify when registering targets
# with this target group. The possible values are `instance` (register
# targets by instance ID), `ip` (register targets by IP address),
# `lambda` (register a single Lambda function as a target), or `alb`
# (register a single Application Load Balancer as a target).
# @return [String]
#
# @!attribute [rw] protocol_version
# \[HTTP/HTTPS protocol\] The protocol version. The possible values
# are `GRPC`, `HTTP1`, and `HTTP2`.
# @return [String]
#
# @!attribute [rw] ip_address_type
# The IP address type. The default value is `ipv4`.
# @return [String]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/TargetGroup AWS API Documentation
#
class TargetGroup < Struct.new(
:target_group_arn,
:target_group_name,
:protocol,
:port,
:vpc_id,
:health_check_protocol,
:health_check_port,
:health_check_enabled,
:health_check_interval_seconds,
:health_check_timeout_seconds,
:healthy_threshold_count,
:unhealthy_threshold_count,
:health_check_path,
:matcher,
:load_balancer_arns,
:target_type,
:protocol_version,
:ip_address_type)
SENSITIVE = []
include Aws::Structure
end
# You've reached the limit on the number of load balancers per target
# group.
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/TargetGroupAssociationLimitException AWS API Documentation
#
class TargetGroupAssociationLimitException < Aws::EmptyStructure; end
# Information about a target group attribute.
#
# @!attribute [rw] key
# The name of the attribute.
#
# The following attributes are supported by all load balancers:
#
# * `deregistration_delay.timeout_seconds` - The amount of time, in
# seconds, for Elastic Load Balancing to wait before changing the
# state of a deregistering target from `draining` to `unused`. The
# range is 0-3600 seconds. The default value is 300 seconds. If the
# target is a Lambda function, this attribute is not supported.
#
# * `stickiness.enabled` - Indicates whether target stickiness is
# enabled. The value is `true` or `false`. The default is `false`.
#
# * `stickiness.type` - Indicates the type of stickiness. The possible
# values are:
#
# * `lb_cookie` and `app_cookie` for Application Load Balancers.
#
# * `source_ip` for Network Load Balancers.
#
# * `source_ip_dest_ip` and `source_ip_dest_ip_proto` for Gateway
# Load Balancers.
#
# The following attributes are supported by Application Load Balancers
# and Network Load Balancers:
#
# * `load_balancing.cross_zone.enabled` - Indicates whether cross zone
# load balancing is enabled. The value is `true`, `false` or
# `use_load_balancer_configuration`. The default is
# `use_load_balancer_configuration`.
#
# * `target_group_health.dns_failover.minimum_healthy_targets.count` -
# The minimum number of targets that must be healthy. If the number
# of healthy targets is below this value, mark the zone as unhealthy
# in DNS, so that traffic is routed only to healthy zones. The
# possible values are `off` or an integer from 1 to the maximum
# number of targets. The default is `off`.
#
# * `target_group_health.dns_failover.minimum_healthy_targets.percentage`
# - The minimum percentage of targets that must be healthy. If the
# percentage of healthy targets is below this value, mark the zone
# as unhealthy in DNS, so that traffic is routed only to healthy
# zones. The possible values are `off` or an integer from 1 to 100.
# The default is `off`.
#
# * `target_group_health.unhealthy_state_routing.minimum_healthy_targets.count`
# - The minimum number of targets that must be healthy. If the
# number of healthy targets is below this value, send traffic to all
# targets, including unhealthy targets. The possible values are 1 to
# the maximum number of targets. The default is 1.
#
# * `target_group_health.unhealthy_state_routing.minimum_healthy_targets.percentage`
# - The minimum percentage of targets that must be healthy. If the
# percentage of healthy targets is below this value, send traffic to
# all targets, including unhealthy targets. The possible values are
# `off` or an integer from 1 to 100. The default is `off`.
#
# The following attributes are supported only if the load balancer is
# an Application Load Balancer and the target is an instance or an IP
# address:
#
# * `load_balancing.algorithm.type` - The load balancing algorithm
# determines how the load balancer selects targets when routing
# requests. The value is `round_robin`,
# `least_outstanding_requests`, or `weighted_random`. The default is
# `round_robin`.
#
# * `load_balancing.algorithm.anomaly_mitigation` - Only available
# when `load_balancing.algorithm.type` is `weighted_random`.
# Indicates whether anomaly mitigation is enabled. The value is `on`
# or `off`. The default is `off`.
#
# * `slow_start.duration_seconds` - The time period, in seconds,
# during which a newly registered target receives an increasing
# share of the traffic to the target group. After this time period
# ends, the target receives its full share of traffic. The range is
# 30-900 seconds (15 minutes). The default is 0 seconds (disabled).
#
# * `stickiness.app_cookie.cookie_name` - Indicates the name of the
# application-based cookie. Names that start with the following
# prefixes are not allowed: `AWSALB`, `AWSALBAPP`, and `AWSALBTG`;
# they're reserved for use by the load balancer.
#
# * `stickiness.app_cookie.duration_seconds` - The time period, in
# seconds, during which requests from a client should be routed to
# the same target. After this time period expires, the
# application-based cookie is considered stale. The range is 1
# second to 1 week (604800 seconds). The default value is 1 day
# (86400 seconds).
#
# * `stickiness.lb_cookie.duration_seconds` - The time period, in
# seconds, during which requests from a client should be routed to
# the same target. After this time period expires, the load
# balancer-generated cookie is considered stale. The range is 1
# second to 1 week (604800 seconds). The default value is 1 day
# (86400 seconds).
#
# The following attribute is supported only if the load balancer is an
# Application Load Balancer and the target is a Lambda function:
#
# * `lambda.multi_value_headers.enabled` - Indicates whether the
# request and response headers that are exchanged between the load
# balancer and the Lambda function include arrays of values or
# strings. The value is `true` or `false`. The default is `false`.
# If the value is `false` and the request contains a duplicate
# header field name or query parameter key, the load balancer uses
# the last value sent by the client.
#
# ^
#
# The following attributes are supported only by Network Load
# Balancers:
#
# * `deregistration_delay.connection_termination.enabled` - Indicates
# whether the load balancer terminates connections at the end of the
# deregistration timeout. The value is `true` or `false`. For new
# UDP/TCP\_UDP target groups the default is `true`. Otherwise, the
# default is `false`.
#
# * `preserve_client_ip.enabled` - Indicates whether client IP
# preservation is enabled. The value is `true` or `false`. The
# default is disabled if the target group type is IP address and the
# target group protocol is TCP or TLS. Otherwise, the default is
# enabled. Client IP preservation can't be disabled for UDP and
# TCP\_UDP target groups.
#
# * `proxy_protocol_v2.enabled` - Indicates whether Proxy Protocol
# version 2 is enabled. The value is `true` or `false`. The default
# is `false`.
#
# * `target_health_state.unhealthy.connection_termination.enabled` -
# Indicates whether the load balancer terminates connections to
# unhealthy targets. The value is `true` or `false`. The default is
# `true`.
#
# * `target_health_state.unhealthy.draining_interval_seconds` - The
# amount of time for Elastic Load Balancing to wait before changing
# the state of an unhealthy target from `unhealthy.draining` to
# `unhealthy`. The range is 0-360000 seconds. The default value is 0
# seconds.
#
# Note: This attribute can only be configured when
# `target_health_state.unhealthy.connection_termination.enabled` is
# `false`.
#
# The following attributes are supported only by Gateway Load
# Balancers:
#
# * `target_failover.on_deregistration` - Indicates how the Gateway
# Load Balancer handles existing flows when a target is
# deregistered. The possible values are `rebalance` and
# `no_rebalance`. The default is `no_rebalance`. The two attributes
# (`target_failover.on_deregistration` and
# `target_failover.on_unhealthy`) can't be set independently. The
# value you set for both attributes must be the same.
#
# * `target_failover.on_unhealthy` - Indicates how the Gateway Load
# Balancer handles existing flows when a target is unhealthy. The
# possible values are `rebalance` and `no_rebalance`. The default is
# `no_rebalance`. The two attributes
# (`target_failover.on_deregistration` and
# `target_failover.on_unhealthy`) can't be set independently. The
# value you set for both attributes must be the same.
# @return [String]
#
# @!attribute [rw] value
# The value of the attribute.
# @return [String]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/TargetGroupAttribute AWS API Documentation
#
class TargetGroupAttribute < Struct.new(
:key,
:value)
SENSITIVE = []
include Aws::Structure
end
# The specified target group does not exist.
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/TargetGroupNotFoundException AWS API Documentation
#
class TargetGroupNotFoundException < Aws::EmptyStructure; end
# Information about the target group stickiness for a rule.
#
# @!attribute [rw] enabled
# Indicates whether target group stickiness is enabled.
# @return [Boolean]
#
# @!attribute [rw] duration_seconds
# The time period, in seconds, during which requests from a client
# should be routed to the same target group. The range is 1-604800
# seconds (7 days).
# @return [Integer]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/TargetGroupStickinessConfig AWS API Documentation
#
class TargetGroupStickinessConfig < Struct.new(
:enabled,
:duration_seconds)
SENSITIVE = []
include Aws::Structure
end
# Information about how traffic will be distributed between multiple
# target groups in a forward rule.
#
# @!attribute [rw] target_group_arn
# The Amazon Resource Name (ARN) of the target group.
# @return [String]
#
# @!attribute [rw] weight
# The weight. The range is 0 to 999.
# @return [Integer]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/TargetGroupTuple AWS API Documentation
#
class TargetGroupTuple < Struct.new(
:target_group_arn,
:weight)
SENSITIVE = []
include Aws::Structure
end
# Information about the current health of a target.
#
# @!attribute [rw] state
# The state of the target.
# @return [String]
#
# @!attribute [rw] reason
# The reason code.
#
# If the target state is `healthy`, a reason code is not provided.
#
# If the target state is `initial`, the reason code can be one of the
# following values:
#
# * `Elb.RegistrationInProgress` - The target is in the process of
# being registered with the load balancer.
#
# * `Elb.InitialHealthChecking` - The load balancer is still sending
# the target the minimum number of health checks required to
# determine its health status.
#
# If the target state is `unhealthy`, the reason code can be one of
# the following values:
#
# * `Target.ResponseCodeMismatch` - The health checks did not return
# an expected HTTP code. Applies only to Application Load Balancers
# and Gateway Load Balancers.
#
# * `Target.Timeout` - The health check requests timed out. Applies
# only to Application Load Balancers and Gateway Load Balancers.
#
# * `Target.FailedHealthChecks` - The load balancer received an error
# while establishing a connection to the target or the target
# response was malformed.
#
# * `Elb.InternalError` - The health checks failed due to an internal
# error. Applies only to Application Load Balancers.
#
# If the target state is `unused`, the reason code can be one of the
# following values:
#
# * `Target.NotRegistered` - The target is not registered with the
# target group.
#
# * `Target.NotInUse` - The target group is not used by any load
# balancer or the target is in an Availability Zone that is not
# enabled for its load balancer.
#
# * `Target.InvalidState` - The target is in the stopped or terminated
# state.
#
# * `Target.IpUnusable` - The target IP address is reserved for use by
# a load balancer.
#
# If the target state is `draining`, the reason code can be the
# following value:
#
# * `Target.DeregistrationInProgress` - The target is in the process
# of being deregistered and the deregistration delay period has not
# expired.
#
# ^
#
# If the target state is `unavailable`, the reason code can be the
# following value:
#
# * `Target.HealthCheckDisabled` - Health checks are disabled for the
# target group. Applies only to Application Load Balancers.
#
# * `Elb.InternalError` - Target health is unavailable due to an
# internal error. Applies only to Network Load Balancers.
# @return [String]
#
# @!attribute [rw] description
# A description of the target health that provides additional details.
# If the state is `healthy`, a description is not provided.
# @return [String]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/TargetHealth AWS API Documentation
#
class TargetHealth < Struct.new(
:state,
:reason,
:description)
SENSITIVE = []
include Aws::Structure
end
# Information about the health of a target.
#
# @!attribute [rw] target
# The description of the target.
# @return [Types::TargetDescription]
#
# @!attribute [rw] health_check_port
# The port to use to connect with the target.
# @return [String]
#
# @!attribute [rw] target_health
# The health information for the target.
# @return [Types::TargetHealth]
#
# @!attribute [rw] anomaly_detection
# The anomaly detection result for the target.
#
# If no anomalies were detected, the result is `normal`.
#
# If anomalies were detected, the result is `anomalous`.
# @return [Types::AnomalyDetection]
#
# @!attribute [rw] administrative_override
# The administrative override information for the target.
# @return [Types::AdministrativeOverride]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/TargetHealthDescription AWS API Documentation
#
class TargetHealthDescription < Struct.new(
:target,
:health_check_port,
:target_health,
:anomaly_detection,
:administrative_override)
SENSITIVE = []
include Aws::Structure
end
# You've reached the limit on the number of actions per rule.
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/TooManyActionsException AWS API Documentation
#
class TooManyActionsException < Aws::EmptyStructure; end
# You've reached the limit on the number of certificates per load
# balancer.
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/TooManyCertificatesException AWS API Documentation
#
class TooManyCertificatesException < Aws::EmptyStructure; end
# You've reached the limit on the number of listeners per load
# balancer.
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/TooManyListenersException AWS API Documentation
#
class TooManyListenersException < Aws::EmptyStructure; end
# You've reached the limit on the number of load balancers for your
# Amazon Web Services account.
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/TooManyLoadBalancersException AWS API Documentation
#
class TooManyLoadBalancersException < Aws::EmptyStructure; end
# You've reached the limit on the number of times a target can be
# registered with a load balancer.
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/TooManyRegistrationsForTargetIdException AWS API Documentation
#
class TooManyRegistrationsForTargetIdException < Aws::EmptyStructure; end
# You've reached the limit on the number of rules per load balancer.
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/TooManyRulesException AWS API Documentation
#
class TooManyRulesException < Aws::EmptyStructure; end
# You've reached the limit on the number of tags for this resource.
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/TooManyTagsException AWS API Documentation
#
class TooManyTagsException < Aws::EmptyStructure; end
# You've reached the limit on the number of target groups for your
# Amazon Web Services account.
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/TooManyTargetGroupsException AWS API Documentation
#
class TooManyTargetGroupsException < Aws::EmptyStructure; end
# You've reached the limit on the number of targets.
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/TooManyTargetsException AWS API Documentation
#
class TooManyTargetsException < Aws::EmptyStructure; end
# The specified trust store has too many revocation entries.
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/TooManyTrustStoreRevocationEntriesException AWS API Documentation
#
class TooManyTrustStoreRevocationEntriesException < Aws::EmptyStructure; end
# You've reached the limit on the number of trust stores for your
# Amazon Web Services account.
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/TooManyTrustStoresException AWS API Documentation
#
class TooManyTrustStoresException < Aws::EmptyStructure; end
# You've reached the limit on the number of unique target groups per
# load balancer across all listeners. If a target group is used by
# multiple actions for a load balancer, it is counted as only one use.
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/TooManyUniqueTargetGroupsPerLoadBalancerException AWS API Documentation
#
class TooManyUniqueTargetGroupsPerLoadBalancerException < Aws::EmptyStructure; end
# Information about a trust store.
#
# @!attribute [rw] name
# The name of the trust store.
# @return [String]
#
# @!attribute [rw] trust_store_arn
# The Amazon Resource Name (ARN) of the trust store.
# @return [String]
#
# @!attribute [rw] status
# The current status of the trust store.
# @return [String]
#
# @!attribute [rw] number_of_ca_certificates
# The number of ca certificates in the trust store.
# @return [Integer]
#
# @!attribute [rw] total_revoked_entries
# The number of revoked certificates in the trust store.
# @return [Integer]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/TrustStore AWS API Documentation
#
class TrustStore < Struct.new(
:name,
:trust_store_arn,
:status,
:number_of_ca_certificates,
:total_revoked_entries)
SENSITIVE = []
include Aws::Structure
end
# Information about the resources a trust store is associated with.
#
# @!attribute [rw] resource_arn
# The Amazon Resource Name (ARN) of the resource.
# @return [String]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/TrustStoreAssociation AWS API Documentation
#
class TrustStoreAssociation < Struct.new(
:resource_arn)
SENSITIVE = []
include Aws::Structure
end
# The specified association does not exist.
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/TrustStoreAssociationNotFoundException AWS API Documentation
#
class TrustStoreAssociationNotFoundException < Aws::EmptyStructure; end
# The specified trust store is currently in use.
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/TrustStoreInUseException AWS API Documentation
#
class TrustStoreInUseException < Aws::EmptyStructure; end
# The specified trust store does not exist.
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/TrustStoreNotFoundException AWS API Documentation
#
class TrustStoreNotFoundException < Aws::EmptyStructure; end
# The specified trust store is not active.
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/TrustStoreNotReadyException AWS API Documentation
#
class TrustStoreNotReadyException < Aws::EmptyStructure; end
# Information about a revocation file in use by a trust store.
#
# @!attribute [rw] trust_store_arn
# The Amazon Resource Name (ARN) of the trust store.
# @return [String]
#
# @!attribute [rw] revocation_id
# The revocation ID of the revocation file.
# @return [Integer]
#
# @!attribute [rw] revocation_type
# The type of revocation file.
# @return [String]
#
# @!attribute [rw] number_of_revoked_entries
# The number of revoked certificates.
# @return [Integer]
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/TrustStoreRevocation AWS API Documentation
#
class TrustStoreRevocation < Struct.new(
:trust_store_arn,
:revocation_id,
:revocation_type,
:number_of_revoked_entries)
SENSITIVE = []
include Aws::Structure
end
# The specified protocol is not supported.
#
# @see http://docs.aws.amazon.com/goto/WebAPI/elasticloadbalancingv2-2015-12-01/UnsupportedProtocolException AWS API Documentation
#
class UnsupportedProtocolException < Aws::EmptyStructure; end
end
end