# :stopdoc: # This file is automatically generated by the WXRuby3 documentation # generator. Do not alter this file. # :startdoc: module Wx::PG # PG_DEFAULT_STYLE = 0 # PGMAN_DEFAULT_STYLE = 0 # # # == wxPropertyGrid Window Styles # # SetWindowStyleFlag method can be used to modify some of these at run-time. # class PG_WINDOW_STYLES < Wx::Enum # This will cause Sort() automatically after an item is added. # PG_AUTO_SORT = Wx::PG::PG_WINDOW_STYLES.new(16) # Categories are not initially shown (even if added). # PG_HIDE_CATEGORIES = Wx::PG::PG_WINDOW_STYLES.new(32) # This style combines non-categoric mode and automatic sorting. # PG_ALPHABETIC_MODE = Wx::PG::PG_WINDOW_STYLES.new(48) # Modified values are shown in bold font. # PG_BOLD_MODIFIED = Wx::PG::PG_WINDOW_STYLES.new(64) # When {Wx::PG::PropertyGrid} is resized, splitter moves to the center. # PG_SPLITTER_AUTO_CENTER = Wx::PG::PG_WINDOW_STYLES.new(128) # Display tool tips for cell text that cannot be shown completely. # PG_TOOLTIPS = Wx::PG::PG_WINDOW_STYLES.new(256) # Disables margin and hides all expand/collapse buttons that would appear outside the margin (for sub-properties). # PG_HIDE_MARGIN = Wx::PG::PG_WINDOW_STYLES.new(512) # This style prevents user from moving the splitter. # PG_STATIC_SPLITTER = Wx::PG::PG_WINDOW_STYLES.new(1024) # Combination of other styles that make it impossible for user to modify the layout. # PG_STATIC_LAYOUT = Wx::PG::PG_WINDOW_STYLES.new(1536) # Disables {Wx::TextCtrl} based editors for properties which can be edited in another way. # PG_LIMITED_EDITING = Wx::PG::PG_WINDOW_STYLES.new(2048) # {Wx::PG::PropertyGridManager} only: Show tool bar for mode and page selection. # PG_TOOLBAR = Wx::PG::PG_WINDOW_STYLES.new(4096) # {Wx::PG::PropertyGridManager} only: Show adjustable text box showing description or help text, if available, for currently selected property. # PG_DESCRIPTION = Wx::PG::PG_WINDOW_STYLES.new(8192) # {Wx::PG::PropertyGridManager} only: don't show an internal border around the property grid. # PG_NO_INTERNAL_BORDER = Wx::PG::PG_WINDOW_STYLES.new(16384) # A mask which can be used to filter (out) all styles. # PG_WINDOW_STYLE_MASK = Wx::PG::PG_WINDOW_STYLES.new(32752) end # PG_WINDOW_STYLES # NOTE: {Wx::PG_EX_xxx} are extra window styles and must be set using SetExtraStyle() member function. # # # class PG_EX_WINDOW_STYLES < Wx::Enum # Speeds up switching to {Wx::PG::PG_WINDOW_STYLES::PG_HIDE_CATEGORIES} mode. # PG_EX_INIT_NOCAT = Wx::PG::PG_EX_WINDOW_STYLES.new(4096) # Extended window style that sets {Wx::PG::PropertyGridManager} tool bar to not use flat style. # PG_EX_NO_FLAT_TOOLBAR = Wx::PG::PG_EX_WINDOW_STYLES.new(8192) # Shows alphabetic/categoric mode buttons on {Wx::PG::PropertyGridManager} tool bar. # PG_EX_MODE_BUTTONS = Wx::PG::PG_EX_WINDOW_STYLES.new(32768) # Show property help strings as tool tips instead as text on the status bar. # PG_EX_HELP_AS_TOOLTIPS = Wx::PG::PG_EX_WINDOW_STYLES.new(65536) # Allows relying on native double-buffering. # PG_EX_NATIVE_DOUBLE_BUFFERING = Wx::PG::PG_EX_WINDOW_STYLES.new(524288) # Set this style to let user have ability to set values of properties to unspecified state. # PG_EX_AUTO_UNSPECIFIED_VALUES = Wx::PG::PG_EX_WINDOW_STYLES.new(2097152) # If this style is used, built-in attributes (such as {Wx::PG::PG_FLOAT_PRECISION} and {Wx::PG::PG_STRING_PASSWORD}) are not stored into property's attribute storage (thus they are not readable). # PG_EX_WRITEONLY_BUILTIN_ATTRIBUTES = Wx::PG::PG_EX_WINDOW_STYLES.new(4194304) # Hides page selection buttons from {Wx::PG::PropertyGridManager} tool bar. # PG_EX_HIDE_PAGE_BUTTONS = Wx::PG::PG_EX_WINDOW_STYLES.new(16777216) # Allows multiple properties to be selected by user (by pressing SHIFT when clicking on a property, or by dragging with left mouse button down). # PG_EX_MULTIPLE_SELECTION = Wx::PG::PG_EX_WINDOW_STYLES.new(33554432) # This enables top-level window tracking which allows {Wx::PG::PropertyGrid} to notify the application of last-minute property value changes by user. # PG_EX_ENABLE_TLP_TRACKING = Wx::PG::PG_EX_WINDOW_STYLES.new(67108864) # Don't show divider above {Wx::PG::PropertyGridManager} toolbar (wxMSW only). # PG_EX_NO_TOOLBAR_DIVIDER = Wx::PG::PG_EX_WINDOW_STYLES.new(134217728) # Show a separator below the {Wx::PG::PropertyGridManager} toolbar. # PG_EX_TOOLBAR_SEPARATOR = Wx::PG::PG_EX_WINDOW_STYLES.new(268435456) # Allows taking focus on the entire area (on canvas) even if {Wx::PG::PropertyGrid} is not a standalone control. # PG_EX_ALWAYS_ALLOW_FOCUS = Wx::PG::PG_EX_WINDOW_STYLES.new(1048576) # A mask which can be used to filter (out) all extra styles applicable to {Wx::PG::PropertyGrid}. # PG_EX_WINDOW_PG_STYLE_MASK = Wx::PG::PG_EX_WINDOW_STYLES.new(108597248) # A mask which can be used to filter (out) all extra styles applicable to {Wx::PG::PropertyGridManager}. # PG_EX_WINDOW_PGMAN_STYLE_MASK = Wx::PG::PG_EX_WINDOW_STYLES.new(419471360) # A mask which can be used to filter (out) all extra styles. # PG_EX_WINDOW_STYLE_MASK = Wx::PG::PG_EX_WINDOW_STYLES.new(528068608) end # PG_EX_WINDOW_STYLES # # # == wxPropertyGrid Validation Failure behaviour Flags # class PG_VALIDATION_FAILURE_BEHAVIOR_FLAGS < Wx::Enum # Prevents user from leaving property unless value is valid. # PG_VFB_STAY_IN_PROPERTY = Wx::PG::PG_VALIDATION_FAILURE_BEHAVIOR_FLAGS.new(1) # Calls {bell} on validation failure. # PG_VFB_BEEP = Wx::PG::PG_VALIDATION_FAILURE_BEHAVIOR_FLAGS.new(2) # Cell with invalid value will be marked (with red colour). # PG_VFB_MARK_CELL = Wx::PG::PG_VALIDATION_FAILURE_BEHAVIOR_FLAGS.new(4) # Display a text message explaining the situation. # PG_VFB_SHOW_MESSAGE = Wx::PG::PG_VALIDATION_FAILURE_BEHAVIOR_FLAGS.new(8) # Similar to {Wx::PG::PG_VALIDATION_FAILURE_BEHAVIOR_FLAGS::PG_VFB_SHOW_MESSAGE}, except always displays the message using {Wx::MessageBox}. # PG_VFB_SHOW_MESSAGEBOX = Wx::PG::PG_VALIDATION_FAILURE_BEHAVIOR_FLAGS.new(16) # Similar to {Wx::PG::PG_VALIDATION_FAILURE_BEHAVIOR_FLAGS::PG_VFB_SHOW_MESSAGE}, except always displays the message on the status bar (when present - you can reimplement {Wx::PG::PropertyGrid#get_status_bar} in a derived class to specify this yourself). # PG_VFB_SHOW_MESSAGE_ON_STATUSBAR = Wx::PG::PG_VALIDATION_FAILURE_BEHAVIOR_FLAGS.new(32) # Defaults. # PG_VFB_DEFAULT = Wx::PG::PG_VALIDATION_FAILURE_BEHAVIOR_FLAGS.new(20) end # PG_VALIDATION_FAILURE_BEHAVIOR_FLAGS # # # == wxPropertyGrid Action Identifiers # # These are used with {Wx::PG::PropertyGrid#add_action_trigger} and {Wx::PG::PropertyGrid#clear_action_triggers}. # class PG_KEYBOARD_ACTIONS < Wx::Enum # # PG_ACTION_INVALID = Wx::PG::PG_KEYBOARD_ACTIONS.new(0) # Select the next property. # PG_ACTION_NEXT_PROPERTY = Wx::PG::PG_KEYBOARD_ACTIONS.new(1) # Select the previous property. # PG_ACTION_PREV_PROPERTY = Wx::PG::PG_KEYBOARD_ACTIONS.new(2) # Expand the selected property, if it has child items. # PG_ACTION_EXPAND_PROPERTY = Wx::PG::PG_KEYBOARD_ACTIONS.new(3) # Collapse the selected property, if it has child items. # PG_ACTION_COLLAPSE_PROPERTY = Wx::PG::PG_KEYBOARD_ACTIONS.new(4) # # PG_ACTION_CANCEL_EDIT = Wx::PG::PG_KEYBOARD_ACTIONS.new(5) # Move focus to the editor control of the currently selected property. # PG_ACTION_EDIT = Wx::PG::PG_KEYBOARD_ACTIONS.new(6) # Causes editor's button (if any) to be pressed. # PG_ACTION_PRESS_BUTTON = Wx::PG::PG_KEYBOARD_ACTIONS.new(7) # # PG_ACTION_MAX = Wx::PG::PG_KEYBOARD_ACTIONS.new(8) end # PG_KEYBOARD_ACTIONS # # EVT_PG_SELECTED = 10331 # # EVT_PG_CHANGING = 10332 # # EVT_PG_CHANGED = 10333 # # EVT_PG_HIGHLIGHTED = 10334 # # EVT_PG_RIGHT_CLICK = 10335 # # EVT_PG_PAGE_CHANGED = 10336 # # EVT_PG_ITEM_COLLAPSED = 10338 # # EVT_PG_ITEM_EXPANDED = 10337 # # EVT_PG_DOUBLE_CLICK = 10339 # # EVT_PG_LABEL_EDIT_BEGIN = 10340 # # EVT_PG_LABEL_EDIT_ENDING = 10341 # # EVT_PG_COL_BEGIN_DRAG = 10342 # # EVT_PG_COL_DRAGGING = 10343 # # EVT_PG_COL_END_DRAG = 10344 # Used to convey validation information to and from functions that actually perform validation. # Mostly used in custom property classes. # # # @note This class is untracked and should not be derived from nor instances extended! class PGValidationInfo < ::Object # # Returns failure behaviour which is a combination of wxPropertyGrid Validation Failure behaviour Flags. # @return [Wx::PGVFBFlags] def get_failure_behavior; end alias_method :failure_behavior, :get_failure_behavior # Returns current failure message. # @return [Wx::String] def get_failure_message; end alias_method :failure_message, :get_failure_message # Returns reference to pending value. # @return [Wx::Variant] def get_value; end alias_method :value, :get_value # Set validation failure behaviour. # @param failureBehavior [Wx::PGVFBFlags] Mixture of wxPropertyGrid Validation Failure behaviour Flags. # @return [void] def set_failure_behavior(failureBehavior) end alias_method :failure_behavior=, :set_failure_behavior # Set current failure message. # @param message [String] # @return [void] def set_failure_message(message) end alias_method :failure_message=, :set_failure_message end # PGValidationInfo end