// Code generated by smithy-go-codegen DO NOT EDIT.

package s3

import (
	"context"
	awsmiddleware "github.com/aws/aws-sdk-go-v2/aws/middleware"
	"github.com/aws/aws-sdk-go-v2/aws/signer/v4"
	internalChecksum "github.com/aws/aws-sdk-go-v2/service/internal/checksum"
	s3cust "github.com/aws/aws-sdk-go-v2/service/s3/internal/customizations"
	"github.com/aws/aws-sdk-go-v2/service/s3/types"
	"github.com/aws/smithy-go/middleware"
	smithyhttp "github.com/aws/smithy-go/transport/http"
)

// This action enables you to delete multiple objects from a bucket using a single
// HTTP request. If you know the object keys that you want to delete, then this
// action provides a suitable alternative to sending individual delete requests,
// reducing per-request overhead. The request contains a list of up to 1000 keys
// that you want to delete. In the XML, you provide the object key names, and
// optionally, version IDs if you want to delete a specific version of the object
// from a versioning-enabled bucket. For each key, Amazon S3 performs a delete
// action and returns the result of that delete, success, or failure, in the
// response. Note that if the object specified in the request is not found, Amazon
// S3 returns the result as deleted. The action supports two modes for the
// response: verbose and quiet. By default, the action uses verbose mode in which
// the response includes the result of deletion of each key in your request. In
// quiet mode the response includes only keys where the delete action encountered
// an error. For a successful deletion, the action does not return any information
// about the delete in the response body. When performing this action on an MFA
// Delete enabled bucket, that attempts to delete any versioned objects, you must
// include an MFA token. If you do not provide one, the entire request will fail,
// even if there are non-versioned objects you are trying to delete. If you provide
// an invalid token, whether there are versioned keys in the request or not, the
// entire Multi-Object Delete request will fail. For information about MFA Delete,
// see  MFA Delete
// (https://docs.aws.amazon.com/AmazonS3/latest/dev/Versioning.html#MultiFactorAuthenticationDelete).
// Finally, the Content-MD5 header is required for all Multi-Object Delete
// requests. Amazon S3 uses the header value to ensure that your request body has
// not been altered in transit. The following operations are related to
// DeleteObjects:
//
// * CreateMultipartUpload
// (https://docs.aws.amazon.com/AmazonS3/latest/API/API_CreateMultipartUpload.html)
//
// *
// UploadPart
// (https://docs.aws.amazon.com/AmazonS3/latest/API/API_UploadPart.html)
//
// *
// CompleteMultipartUpload
// (https://docs.aws.amazon.com/AmazonS3/latest/API/API_CompleteMultipartUpload.html)
//
// *
// ListParts
// (https://docs.aws.amazon.com/AmazonS3/latest/API/API_ListParts.html)
//
// *
// AbortMultipartUpload
// (https://docs.aws.amazon.com/AmazonS3/latest/API/API_AbortMultipartUpload.html)
func (c *Client) DeleteObjects(ctx context.Context, params *DeleteObjectsInput, optFns ...func(*Options)) (*DeleteObjectsOutput, error) {
	if params == nil {
		params = &DeleteObjectsInput{}
	}

	result, metadata, err := c.invokeOperation(ctx, "DeleteObjects", params, optFns, c.addOperationDeleteObjectsMiddlewares)
	if err != nil {
		return nil, err
	}

	out := result.(*DeleteObjectsOutput)
	out.ResultMetadata = metadata
	return out, nil
}

type DeleteObjectsInput struct {

	// The bucket name containing the objects to delete. When using this action with an
	// access point, you must direct requests to the access point hostname. The access
	// point hostname takes the form
	// AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this
	// action with an access point through the Amazon Web Services SDKs, you provide
	// the access point ARN in place of the bucket name. For more information about
	// access point ARNs, see Using access points
	// (https://docs.aws.amazon.com/AmazonS3/latest/userguide/using-access-points.html)
	// in the Amazon S3 User Guide. When using this action with Amazon S3 on Outposts,
	// you must direct requests to the S3 on Outposts hostname. The S3 on Outposts
	// hostname takes the form
	// AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When using
	// this action with S3 on Outposts through the Amazon Web Services SDKs, you
	// provide the Outposts bucket ARN in place of the bucket name. For more
	// information about S3 on Outposts ARNs, see Using Amazon S3 on Outposts
	// (https://docs.aws.amazon.com/AmazonS3/latest/userguide/S3onOutposts.html) in the
	// Amazon S3 User Guide.
	//
	// This member is required.
	Bucket *string

	// Container for the request.
	//
	// This member is required.
	Delete *types.Delete

	// Specifies whether you want to delete this object even if it has a
	// Governance-type Object Lock in place. To use this header, you must have the
	// s3:BypassGovernanceRetention permission.
	BypassGovernanceRetention bool

	// Indicates the algorithm used to create the checksum for the object when using
	// the SDK. This header will not provide any additional functionality if not using
	// the SDK. When sending this header, there must be a corresponding x-amz-checksum
	// or x-amz-trailer header sent. Otherwise, Amazon S3 fails the request with the
	// HTTP status code 400 Bad Request. For more information, see Checking object
	// integrity
	// (https://docs.aws.amazon.com/AmazonS3/latest/userguide/checking-object-integrity.html)
	// in the Amazon S3 User Guide. If you provide an individual checksum, Amazon S3
	// ignores any provided ChecksumAlgorithm parameter. This checksum algorithm must
	// be the same for all parts and it match the checksum value supplied in the
	// CreateMultipartUpload request.
	ChecksumAlgorithm types.ChecksumAlgorithm

	// The account ID of the expected bucket owner. If the bucket is owned by a
	// different account, the request fails with the HTTP status code 403 Forbidden
	// (access denied).
	ExpectedBucketOwner *string

	// The concatenation of the authentication device's serial number, a space, and the
	// value that is displayed on your authentication device. Required to permanently
	// delete a versioned object if versioning is configured with MFA delete enabled.
	MFA *string

	// Confirms that the requester knows that they will be charged for the request.
	// Bucket owners need not specify this parameter in their requests. For information
	// about downloading objects from Requester Pays buckets, see Downloading Objects
	// in Requester Pays Buckets
	// (https://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectsinRequesterPaysBuckets.html)
	// in the Amazon S3 User Guide.
	RequestPayer types.RequestPayer

	noSmithyDocumentSerde
}

type DeleteObjectsOutput struct {

	// Container element for a successful delete. It identifies the object that was
	// successfully deleted.
	Deleted []types.DeletedObject

	// Container for a failed delete action that describes the object that Amazon S3
	// attempted to delete and the error it encountered.
	Errors []types.Error

	// If present, indicates that the requester was successfully charged for the
	// request.
	RequestCharged types.RequestCharged

	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata

	noSmithyDocumentSerde
}

func (c *Client) addOperationDeleteObjectsMiddlewares(stack *middleware.Stack, options Options) (err error) {
	err = stack.Serialize.Add(&awsRestxml_serializeOpDeleteObjects{}, middleware.After)
	if err != nil {
		return err
	}
	err = stack.Deserialize.Add(&awsRestxml_deserializeOpDeleteObjects{}, middleware.After)
	if err != nil {
		return err
	}
	if err = addSetLoggerMiddleware(stack, options); err != nil {
		return err
	}
	if err = awsmiddleware.AddClientRequestIDMiddleware(stack); err != nil {
		return err
	}
	if err = smithyhttp.AddComputeContentLengthMiddleware(stack); err != nil {
		return err
	}
	if err = addResolveEndpointMiddleware(stack, options); err != nil {
		return err
	}
	if err = v4.AddComputePayloadSHA256Middleware(stack); err != nil {
		return err
	}
	if err = addRetryMiddlewares(stack, options); err != nil {
		return err
	}
	if err = addHTTPSignerV4Middleware(stack, options); err != nil {
		return err
	}
	if err = awsmiddleware.AddRawResponseToMetadata(stack); err != nil {
		return err
	}
	if err = awsmiddleware.AddRecordResponseTiming(stack); err != nil {
		return err
	}
	if err = addClientUserAgent(stack); err != nil {
		return err
	}
	if err = smithyhttp.AddErrorCloseResponseBodyMiddleware(stack); err != nil {
		return err
	}
	if err = smithyhttp.AddCloseResponseBodyMiddleware(stack); err != nil {
		return err
	}
	if err = swapWithCustomHTTPSignerMiddleware(stack, options); err != nil {
		return err
	}
	if err = addOpDeleteObjectsValidationMiddleware(stack); err != nil {
		return err
	}
	if err = stack.Initialize.Add(newServiceMetadataMiddleware_opDeleteObjects(options.Region), middleware.Before); err != nil {
		return err
	}
	if err = addMetadataRetrieverMiddleware(stack); err != nil {
		return err
	}
	if err = addDeleteObjectsInputChecksumMiddlewares(stack, options); err != nil {
		return err
	}
	if err = addDeleteObjectsUpdateEndpoint(stack, options); err != nil {
		return err
	}
	if err = addResponseErrorMiddleware(stack); err != nil {
		return err
	}
	if err = v4.AddContentSHA256HeaderMiddleware(stack); err != nil {
		return err
	}
	if err = disableAcceptEncodingGzip(stack); err != nil {
		return err
	}
	if err = addRequestResponseLogging(stack, options); err != nil {
		return err
	}
	return nil
}

func newServiceMetadataMiddleware_opDeleteObjects(region string) *awsmiddleware.RegisterServiceMetadata {
	return &awsmiddleware.RegisterServiceMetadata{
		Region:        region,
		ServiceID:     ServiceID,
		SigningName:   "s3",
		OperationName: "DeleteObjects",
	}
}

// getDeleteObjectsRequestAlgorithmMember gets the request checksum algorithm value
// provided as input.
func getDeleteObjectsRequestAlgorithmMember(input interface{}) (string, bool) {
	in := input.(*DeleteObjectsInput)
	if len(in.ChecksumAlgorithm) == 0 {
		return "", false
	}
	return string(in.ChecksumAlgorithm), true
}

func addDeleteObjectsInputChecksumMiddlewares(stack *middleware.Stack, options Options) error {
	return internalChecksum.AddInputMiddleware(stack, internalChecksum.InputMiddlewareOptions{
		GetAlgorithm:                     getDeleteObjectsRequestAlgorithmMember,
		RequireChecksum:                  true,
		EnableTrailingChecksum:           false,
		EnableComputeSHA256PayloadHash:   true,
		EnableDecodedContentLengthHeader: true,
	})
}

// getDeleteObjectsBucketMember returns a pointer to string denoting a provided
// bucket member valueand a boolean indicating if the input has a modeled bucket
// name,
func getDeleteObjectsBucketMember(input interface{}) (*string, bool) {
	in := input.(*DeleteObjectsInput)
	if in.Bucket == nil {
		return nil, false
	}
	return in.Bucket, true
}
func addDeleteObjectsUpdateEndpoint(stack *middleware.Stack, options Options) error {
	return s3cust.UpdateEndpoint(stack, s3cust.UpdateEndpointOptions{
		Accessor: s3cust.UpdateEndpointParameterAccessor{
			GetBucketFromInput: getDeleteObjectsBucketMember,
		},
		UsePathStyle:                   options.UsePathStyle,
		UseAccelerate:                  options.UseAccelerate,
		SupportsAccelerate:             true,
		TargetS3ObjectLambda:           false,
		EndpointResolver:               options.EndpointResolver,
		EndpointResolverOptions:        options.EndpointOptions,
		UseARNRegion:                   options.UseARNRegion,
		DisableMultiRegionAccessPoints: options.DisableMultiRegionAccessPoints,
	})
}