en:
vagrant_zones:
states:
not_created: |-
Your instance of this box haven't been created
is_running: |-
Your instance has already be booted
errors:
not_yet_implemented: |-
Your configuration is not yet implemented
halt_timeout: |-
Zone failed to halt in alloted time after waiting for
invalidLX_brand: |-
Invalid LX brand configuration detected
invalidbhyve_brand: |-
Invalid bhyve configuration detected
console_failed: |-
Failed to access console
console_failed: |-
Failed to apply the netplan configuration inside the VM
console_failed_exit: |-
Exiting
execute_error: |-
Failed when execute commands
timeout_error: |-
Timeout exceeded
system_version_too_low: |-
Please update to OmniOS r38 or higher
missing_compatability_check_tool: |-
Please install the Bhyve compatability tool from: https://omnios.org/info/bhyve
missing_bhyve: |-
Your system appears to be missing bhyve
virtual_box_running_conflict_detected: |-
Virtualbox Box appears to be running virtual machines, to continue, please shut these down!
meeting: |-
Starting the zone creation sequence
leaving: |-
Starting the zone destruction sequence
halting_zone: |-
Halting the zone
destroy_zone: |-
Starting zone destruction
graceful_shutdown_failed: |-
Zone failed to shutdown in alloted time ==>
graceful_shutdown: |-
Asking hypervisor to gracefully stop the zone
creating_vnic: |-
- Creating VNIC:
configure_interface_using_vnic: |-
- Configuring the interface in the zone for VNIC using netplan:
configure_win_interface_using_vnic: |-
- Waiting 60 seconds then configuring the Windows network interface in the zone:
configure_interface_using_vnic_dladm: |-
- Configuring the interface in the zone for VNIC using dladm:
os_detect: |-
- Detecting Operating System to configure networking:
ansible_detect: |-
- Detecting if Ansible is installed:
vnic_setup: |-
- Setting up VNIC:
networking_int_remove: |-
Removing network devices:
networking_int_add: |-
- Adding network devices:
removing_vnic: |-
- Deleting zone VNIC:
no_removing_vnic: |-
- No zone VNIC to remove
removing_host_vnic: |-
- Deleting host VNIC:
no_removing_host_vnic: |-
- No host VNIC to remove
network_setup: |-
Preparing zone OS networking interfaces:
delete_disks: |-
Removing associated disks:
zonelogincmd: |-
Running command with zLogin
user: |-
Filtering the user Vagrant will use
installing_zone: |-
Installing zone as brand:
netplan_remove: |-
- Removing stale netplan configurations
netplan_set: |-
- Generate fresh netplan configurations
dladm_applied: |-
- dladm and ipadm configurations Applied
dladm_route_applied: |-
- Route has been applied
dladm_dns_applied: |-
- DNS has been applied
netplan_applied: |-
- New Netplan configurations Applied
netplan_applied_dhcp: |-
- Set DHCP Netplan configurations
stale_netplan_removed: |-
- Stale Netplan configurations removed
netplan_applied_static: |-
- Set static Netplan configurations:
console_failednetplan: |-
Netplan configurations failed
lx_zone_dataset: |-
- Creating zoned ZFS dataset for LX zone:
bhyve_zone_dataset_root: |-
- ZFS root dataset:
begin_create_datasets: |-
Creating ZFS datasets and volumes:
bhyve_zone_dataset_boot: |-
- ZFS boot volume:
setting_cd_rom_configurations: |-
- Setting CDROM Configurations:
setting_additional_disks_configurations: |-
- Setting additional disk Configurations:
bhyve_zone_dataset_additional_volume: |-
- Additional ZFS volume:
bhyve_zone_dataset_additional_volume_destroy: |-
- Additional ZFS volume:
addtl_volume_destroy_root: |-
- ZFS root dataset for additional ZFS volume:
bhyve_zone_dataset_additional_volume_root: |-
- ZFS root dataset for additional ZFS volume:
destroy_root_dataset: |-
- ZFS root dataset:
destroy_dataset: |-
- ZFS Boot volume dataset:
lx_zone_config_gen: |-
Generating configuration for LX zone
bhyve_zone_config_gen: |-
Generating zone configuration:
bhyve_zone_config_remove: |-
Removing zonecfg configuration
bhyve_zone_config_uninstall: |-
Uninstalling the zone
preflight_checks: |-
Running Preflight checks:
vbox_run_check: |-
- Checking if VirtualBox is loaded as it may conflict with bhyve
lx_check: |-
Minimal checks performed for LX Branded zones on the host OS, please use with caution!
bhyve_check: |-
- Checking OmniOS release against version:
bhyve_compat_check: |-
- Checking bhyve installation environment
wait_for_boot: |-
Waiting for the zone to boot
sshport: |-
Filtering the SSH port that Vagrant will use
vagrantuserpass: |-
Filtering the Vagrant user Password
firmware: |-
Filtering the firmware that bhyve will use
inserting_ssh_key: |-
Inserting SSH key
booted_check_terminal_access: |-
Zone booted, checking for login access/prompt over Serial:
terminal_access_auto_login: |-
Could not login as root, will attempt to auto-login with supplied credentials:
detecting_box: |-
Detecting image
importing_vagrant_key: |-
Importing Vagrant key from Cloud:
datadir: |-
Vagrant datadir:
zfs_snapshot_stream_detected: |-
ZFS Snapshot Stream detected ==>
joyent_image_uuid_detected: |-
Joyent UUID detected ==>
vagrant_cloud_box_detected: |-
- Vagrant Cloud Box detected:
ssh_ready: |-
SSH appears to be ready
boot_ready: |-
The zone has booted
dhcp_boot_ready: |-
The zone is configured with NAT and booted
root_dataset_nil: |-
- No root dataset to remove
boot_dataset_nil: |-
- No boot volumes to remove
additional_dataset_nil: |-
- No additional volumes to remove
starting_zone: |-
Starting the zone
joyent_image_uuid_verified: |-
Joyent image UUID has been verified ==>
lx_zone_dataset: |-
LX zone dataset ==>
setting_dns_server: |-
Setting nameserver ==>
detected_ovf_format: |-
Detected OVF
importing_box_image: |-
- Importing Box image ==>
importing_box_image_to_disk: |-
- Importing Box template to disk ==>
template_import_path: |-
- Template path:
template_import_path_set_size: |-
- Setting Boot Volume Size
importing_joyent_image: |-
- Importing Joyent image ==>
graceful_restart: |-
Zone gracefully restarting
graceful_shutdown_started: |-
Zone gracefully shutting down
graceful_shutdown_complete: |-
Graceful shutdown complete
zone_gracefully_restarted: |-
Graceful restart complete
zone_gracefully_stopped_waiting_for_boot: |-
Zone gracefully shutdown, now waiting for boot
console: |-
Starting console:
setting_console_access: |-
- Setting console access port:
zfs_snapshot_cron: |-
Listing configured cron jobs
zfs_snapshot_create: |-
Creating ZFS snapshot(s):
setting_cloud_dnsdomain: |-
- Setting cloud-init DNS domain:
setting_cloud_password: |-
- Setting cloud-init password:
setting_cloud_resolvers: |-
- Setting cloud-init Resolvers:
setting_cloud_ssh_key: |-
- Setting cloud-init SSH key:
setting_cloud_init_access: |-
- Enabling cloud-init:
control_no_cmd: |-
No control command specified
ssh_run_command: |-
Running Command over SSH:
vtype: |-
Filtering zone type
nsservers: |-
Sanitizing Name Servers:
mac: |-
Sanitizing MAC address:
ipaddress: |-
Sanitizing IP address:
allowedaddress: |-
Sanitizing Allowed IP address:
vnic_name: |-
Sanitizing the VNIC name:
get_ip_address: |-
Gathering IP address
creating_etherstub: |-
- Creating etherstub for private network:
creating_etherhostvnic: |-
- Creating NAT VNIC for zone over etherstub:
creating_ethervnic: |-
- Creating VNIC for host over etherstub:
creating_networking_interfaces: |-
Creating networking interfaces for zone:
nat_vnic_setup: |-
- Setting up NAT VNIC:
vnic_conf_del: |-
- Removing the provisional vnic from the zones configuration:
forwarding_nat: |-
- Enabling NAT forwarding:
configuring_nat: |-
- Creating NAT entries:
deconfiguring_nat: |-
- Removing NAT configurations:
configuring_dhcp: |-
- Configuring DHCP
deconfiguring_dhcp: |-
- Removing DHCP configurations:
chk_dhcp_addr: |-
- Checking if zone has leased the address:
setting_alt_shared_disk_configurations: |-
Setting shared disk configurations
zonecfgcpu: |-
Setting the CPU for zone
pci: |-
Setting the PCI devices for zone
zfs_snapshot_list: |-
ZFS snapshots detected:
zfs_snapshot_destroy: |-
Destroying ZFS snapshots for zone:
cron_entries: |-
Listing cron entries for zone
cron_set: |-
Setting cron entries for zone
cron_delete: |-
Deleting cron entries for zone
control: |-
Running control command on zone:
delete_ethervnic: |-
- Deleting the etherstub:
no_delete_ethervnic: |-
- No etherstub to remove
automated-zlogin: |-
Automatic Login
automated-windows-zlogin: |-
Windows SAC Autologin
automated-zlogin-user: |-
- Entering username, Waiting a few seconds
automated-zlogin-pass: |-
- Entering password, Waiting a few seconds
automated-zbootunlock: |-
- Unlocking LUKS Keystore for the boot disk
automated-zlogin-root: |-
- Impersonating root, Waiting a few seconds
windows_skip_first_boot: |-
- Skipping First EVENT for CMD due to Sysprep Reboot
windows_start_cmd: |-
- Starting CMD session
windows_access_session: |-
- Accessing Command Session
windows_access_session_presskey: |-
- Pressing Any Key enter Command Session
windows_enter_username: |-
- Entering Username
windows_enter_domain: |-
- Entering/Skipping Domain
windows_enter_password: |-
- Entering password
windows_cmd_accessible: |-
- CMD Accessible
win_applied_rename_adapter: |-
- Renamed Default Adapter
win_applied_static: |-
- Set Static Address
win_applied_dns1: |-
- Set Primary DNS
win_applied_dns2: |-
- Set Secondary DNS