# frozen_string_literal: true
# Copyright (c) 2017-2018 THL A29 Limited, a Tencent company. All Rights Reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
module TencentCloud
module Lighthouse
module V20200324
# ApplyDiskBackup请求参数结构体
class ApplyDiskBackupRequest < TencentCloud::Common::AbstractModel
# @param DiskId: 云硬盘ID，可通过[DescribeDisks](https://cloud.tencent.com/document/api/1207/66093)接口查询。
# @type DiskId: String
# @param DiskBackupId: 云硬盘备份点ID，可通过 DescribeDiskBackups 接口查询。
# @type DiskBackupId: String
attr_accessor :DiskId, :DiskBackupId
def initialize(diskid=nil, diskbackupid=nil)
@DiskId = diskid
@DiskBackupId = diskbackupid
end
def deserialize(params)
@DiskId = params['DiskId']
@DiskBackupId = params['DiskBackupId']
end
end
# ApplyDiskBackup返回参数结构体
class ApplyDiskBackupResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ApplyInstanceSnapshot请求参数结构体
class ApplyInstanceSnapshotRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例 ID。
# @type InstanceId: String
# @param SnapshotId: 快照 ID。
# @type SnapshotId: String
attr_accessor :InstanceId, :SnapshotId
def initialize(instanceid=nil, snapshotid=nil)
@InstanceId = instanceid
@SnapshotId = snapshotid
end
def deserialize(params)
@InstanceId = params['InstanceId']
@SnapshotId = params['SnapshotId']
end
end
# ApplyInstanceSnapshot返回参数结构体
class ApplyInstanceSnapshotResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# AssociateInstancesKeyPairs请求参数结构体
class AssociateInstancesKeyPairsRequest < TencentCloud::Common::AbstractModel
# @param KeyIds: 密钥对 ID 列表。每次请求批量密钥对的上限为 100。
# @type KeyIds: Array
# @param InstanceIds: 实例 ID 列表。每次请求批量实例的上限为 100。可通过[DescribeInstances](https://cloud.tencent.com/document/api/1207/47573)接口返回值中的InstanceId获取。
# @type InstanceIds: Array
attr_accessor :KeyIds, :InstanceIds
def initialize(keyids=nil, instanceids=nil)
@KeyIds = keyids
@InstanceIds = instanceids
end
def deserialize(params)
@KeyIds = params['KeyIds']
@InstanceIds = params['InstanceIds']
end
end
# AssociateInstancesKeyPairs返回参数结构体
class AssociateInstancesKeyPairsResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# AttachCcn请求参数结构体
class AttachCcnRequest < TencentCloud::Common::AbstractModel
# @param CcnId: 云联网实例ID。
# @type CcnId: String
attr_accessor :CcnId
def initialize(ccnid=nil)
@CcnId = ccnid
end
def deserialize(params)
@CcnId = params['CcnId']
end
end
# AttachCcn返回参数结构体
class AttachCcnResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# 挂载信息
class AttachDetail < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param AttachedDiskCount: 实例已挂载弹性云盘数量
# @type AttachedDiskCount: Integer
# @param MaxAttachCount: 可挂载弹性云盘数量
# @type MaxAttachCount: Integer
attr_accessor :InstanceId, :AttachedDiskCount, :MaxAttachCount
def initialize(instanceid=nil, attacheddiskcount=nil, maxattachcount=nil)
@InstanceId = instanceid
@AttachedDiskCount = attacheddiskcount
@MaxAttachCount = maxattachcount
end
def deserialize(params)
@InstanceId = params['InstanceId']
@AttachedDiskCount = params['AttachedDiskCount']
@MaxAttachCount = params['MaxAttachCount']
end
end
# AttachDisks请求参数结构体
class AttachDisksRequest < TencentCloud::Common::AbstractModel
# @param DiskIds: 云硬盘ID列表。
# @type DiskIds: Array
# @param InstanceId: 实例ID。
# @type InstanceId: String
# @param RenewFlag: 续费标识。
# @type RenewFlag: String
attr_accessor :DiskIds, :InstanceId, :RenewFlag
def initialize(diskids=nil, instanceid=nil, renewflag=nil)
@DiskIds = diskids
@InstanceId = instanceid
@RenewFlag = renewflag
end
def deserialize(params)
@DiskIds = params['DiskIds']
@InstanceId = params['InstanceId']
@RenewFlag = params['RenewFlag']
end
end
# AttachDisks返回参数结构体
class AttachDisksResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# 描述了镜像信息。
class Blueprint < TencentCloud::Common::AbstractModel
# @param BlueprintId: 镜像 ID ，是 Blueprint 的唯一标识。
# @type BlueprintId: String
# @param DisplayTitle: 镜像对外展示标题。
# @type DisplayTitle: String
# @param DisplayVersion: 镜像对外展示版本。
# @type DisplayVersion: String
# @param Description: 镜像描述信息。
# @type Description: String
# @param OsName: 操作系统名称。
# @type OsName: String
# @param Platform: 操作系统平台。
# @type Platform: String
# @param PlatformType: 操作系统平台类型，如 LINUX_UNIX、WINDOWS。
# @type PlatformType: String
# @param BlueprintType: 镜像类型，如 APP_OS、PURE_OS、PRIVATE。
# @type BlueprintType: String
# @param ImageUrl: 镜像图片 URL。
# @type ImageUrl: String
# @param RequiredSystemDiskSize: 镜像所需系统盘大小，单位 GB。
# @type RequiredSystemDiskSize: Integer
# @param BlueprintState: 镜像状态。
# @type BlueprintState: String
# @param CreatedTime: 创建时间。按照 ISO8601 标准表示，并且使用 UTC 时间。
# 格式为： YYYY-MM-DDThh:mm:ssZ。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CreatedTime: String
# @param BlueprintName: 镜像名称。
# @type BlueprintName: String
# @param SupportAutomationTools: 镜像是否支持自动化助手。
# @type SupportAutomationTools: Boolean
# @param RequiredMemorySize: 镜像所需内存大小, 单位: GB
# @type RequiredMemorySize: Integer
# @param ImageId: CVM镜像共享到轻量应用服务器轻量应用服务器后的CVM镜像ID。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ImageId: String
# @param CommunityUrl: 官方网站Url。
# @type CommunityUrl: String
# @param GuideUrl: 指导文章Url。
# @type GuideUrl: String
# @param SceneIdSet: 镜像关联使用场景Id列表。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SceneIdSet: Array
attr_accessor :BlueprintId, :DisplayTitle, :DisplayVersion, :Description, :OsName, :Platform, :PlatformType, :BlueprintType, :ImageUrl, :RequiredSystemDiskSize, :BlueprintState, :CreatedTime, :BlueprintName, :SupportAutomationTools, :RequiredMemorySize, :ImageId, :CommunityUrl, :GuideUrl, :SceneIdSet
def initialize(blueprintid=nil, displaytitle=nil, displayversion=nil, description=nil, osname=nil, platform=nil, platformtype=nil, blueprinttype=nil, imageurl=nil, requiredsystemdisksize=nil, blueprintstate=nil, createdtime=nil, blueprintname=nil, supportautomationtools=nil, requiredmemorysize=nil, imageid=nil, communityurl=nil, guideurl=nil, sceneidset=nil)
@BlueprintId = blueprintid
@DisplayTitle = displaytitle
@DisplayVersion = displayversion
@Description = description
@OsName = osname
@Platform = platform
@PlatformType = platformtype
@BlueprintType = blueprinttype
@ImageUrl = imageurl
@RequiredSystemDiskSize = requiredsystemdisksize
@BlueprintState = blueprintstate
@CreatedTime = createdtime
@BlueprintName = blueprintname
@SupportAutomationTools = supportautomationtools
@RequiredMemorySize = requiredmemorysize
@ImageId = imageid
@CommunityUrl = communityurl
@GuideUrl = guideurl
@SceneIdSet = sceneidset
end
def deserialize(params)
@BlueprintId = params['BlueprintId']
@DisplayTitle = params['DisplayTitle']
@DisplayVersion = params['DisplayVersion']
@Description = params['Description']
@OsName = params['OsName']
@Platform = params['Platform']
@PlatformType = params['PlatformType']
@BlueprintType = params['BlueprintType']
@ImageUrl = params['ImageUrl']
@RequiredSystemDiskSize = params['RequiredSystemDiskSize']
@BlueprintState = params['BlueprintState']
@CreatedTime = params['CreatedTime']
@BlueprintName = params['BlueprintName']
@SupportAutomationTools = params['SupportAutomationTools']
@RequiredMemorySize = params['RequiredMemorySize']
@ImageId = params['ImageId']
@CommunityUrl = params['CommunityUrl']
@GuideUrl = params['GuideUrl']
@SceneIdSet = params['SceneIdSet']
end
end
# 描述镜像实例信息。
class BlueprintInstance < TencentCloud::Common::AbstractModel
# @param Blueprint: 镜像信息。
# @type Blueprint: :class:`Tencentcloud::Lighthouse.v20200324.models.Blueprint`
# @param SoftwareSet: 软件列表。
# @type SoftwareSet: Array
# @param InstanceId: 实例 ID。
# @type InstanceId: String
attr_accessor :Blueprint, :SoftwareSet, :InstanceId
def initialize(blueprint=nil, softwareset=nil, instanceid=nil)
@Blueprint = blueprint
@SoftwareSet = softwareset
@InstanceId = instanceid
end
def deserialize(params)
unless params['Blueprint'].nil?
@Blueprint = Blueprint.new
@Blueprint.deserialize(params['Blueprint'])
end
unless params['SoftwareSet'].nil?
@SoftwareSet = []
params['SoftwareSet'].each do |i|
software_tmp = Software.new
software_tmp.deserialize(i)
@SoftwareSet << software_tmp
end
end
@InstanceId = params['InstanceId']
end
end
# BlueprintPrice 自定义镜像的价格参数。
class BlueprintPrice < TencentCloud::Common::AbstractModel
# @param OriginalBlueprintPrice: 镜像单价，原价。单位元。
# @type OriginalBlueprintPrice: Float
# @param OriginalPrice: 镜像总价，原价。单位元。
# @type OriginalPrice: Float
# @param Discount: 折扣。
# @type Discount: Integer
# @param DiscountPrice: 镜像折扣后总价。单位元。
# @type DiscountPrice: Float
attr_accessor :OriginalBlueprintPrice, :OriginalPrice, :Discount, :DiscountPrice
def initialize(originalblueprintprice=nil, originalprice=nil, discount=nil, discountprice=nil)
@OriginalBlueprintPrice = originalblueprintprice
@OriginalPrice = originalprice
@Discount = discount
@DiscountPrice = discountprice
end
def deserialize(params)
@OriginalBlueprintPrice = params['OriginalBlueprintPrice']
@OriginalPrice = params['OriginalPrice']
@Discount = params['Discount']
@DiscountPrice = params['DiscountPrice']
end
end
# 套餐信息。
class Bundle < TencentCloud::Common::AbstractModel
# @param BundleId: 套餐 ID。
# @type BundleId: String
# @param Memory: 内存大小，单位 GB。
# @type Memory: Integer
# @param SystemDiskType: 系统盘类型。
# 取值范围：
# LOCAL_BASIC：本地硬盘 LOCAL_SSD：本地 SSD 硬盘 CLOUD_BASIC：普通云硬盘 CLOUD_SSD：SSD 云硬盘 CLOUD_PREMIUM：高性能云硬盘
# @type SystemDiskType: String
# @param SystemDiskSize: 系统盘大小。
# @type SystemDiskSize: Integer
# @param MonthlyTraffic: 每月网络流量，单位 Gb。
# @type MonthlyTraffic: Integer
# @param SupportLinuxUnixPlatform: 是否支持 Linux/Unix 平台。
# @type SupportLinuxUnixPlatform: Boolean
# @param SupportWindowsPlatform: 是否支持 Windows 平台。
# @type SupportWindowsPlatform: Boolean
# @param Price: 套餐当前单位价格信息。
# @type Price: :class:`Tencentcloud::Lighthouse.v20200324.models.Price`
# @param CPU: CPU 核数。
# @type CPU: Integer
# @param InternetMaxBandwidthOut: 峰值带宽，单位 Mbps。
# @type InternetMaxBandwidthOut: Integer
# @param InternetChargeType: 网络计费类型。
# @type InternetChargeType: String
# @param BundleSalesState: 套餐售卖状态,取值:‘AVAILABLE’(可用) , ‘SOLD_OUT’(售罄)
# @type BundleSalesState: String
# @param BundleType: 套餐类型。
# 取值范围：
# GENERAL_BUNDLE：通用型 STORAGE_BUNDLE：存储型
# @type BundleType: String
# @param BundleDisplayLabel: 套餐展示标签.
# 取值范围:
# "ACTIVITY": 活动套餐,
# "NORMAL": 普通套餐
# "CAREFREE": 无忧套餐
# @type BundleDisplayLabel: String
attr_accessor :BundleId, :Memory, :SystemDiskType, :SystemDiskSize, :MonthlyTraffic, :SupportLinuxUnixPlatform, :SupportWindowsPlatform, :Price, :CPU, :InternetMaxBandwidthOut, :InternetChargeType, :BundleSalesState, :BundleType, :BundleDisplayLabel
def initialize(bundleid=nil, memory=nil, systemdisktype=nil, systemdisksize=nil, monthlytraffic=nil, supportlinuxunixplatform=nil, supportwindowsplatform=nil, price=nil, cpu=nil, internetmaxbandwidthout=nil, internetchargetype=nil, bundlesalesstate=nil, bundletype=nil, bundledisplaylabel=nil)
@BundleId = bundleid
@Memory = memory
@SystemDiskType = systemdisktype
@SystemDiskSize = systemdisksize
@MonthlyTraffic = monthlytraffic
@SupportLinuxUnixPlatform = supportlinuxunixplatform
@SupportWindowsPlatform = supportwindowsplatform
@Price = price
@CPU = cpu
@InternetMaxBandwidthOut = internetmaxbandwidthout
@InternetChargeType = internetchargetype
@BundleSalesState = bundlesalesstate
@BundleType = bundletype
@BundleDisplayLabel = bundledisplaylabel
end
def deserialize(params)
@BundleId = params['BundleId']
@Memory = params['Memory']
@SystemDiskType = params['SystemDiskType']
@SystemDiskSize = params['SystemDiskSize']
@MonthlyTraffic = params['MonthlyTraffic']
@SupportLinuxUnixPlatform = params['SupportLinuxUnixPlatform']
@SupportWindowsPlatform = params['SupportWindowsPlatform']
unless params['Price'].nil?
@Price = Price.new
@Price.deserialize(params['Price'])
end
@CPU = params['CPU']
@InternetMaxBandwidthOut = params['InternetMaxBandwidthOut']
@InternetChargeType = params['InternetChargeType']
@BundleSalesState = params['BundleSalesState']
@BundleType = params['BundleType']
@BundleDisplayLabel = params['BundleDisplayLabel']
end
end
# 云联网关联的实例列表。
class CcnAttachedInstance < TencentCloud::Common::AbstractModel
# @param CcnId: 云联网ID。
# @type CcnId: String
# @param CidrBlock: 关联实例CIDR。
# @type CidrBlock: Array
# @param State: 关联实例状态：
# • PENDING：申请中
# • ACTIVE：已连接
# • EXPIRED：已过期
# • REJECTED：已拒绝
# • DELETED：已删除
# • FAILED：失败的（2小时后将异步强制解关联）
# • ATTACHING：关联中
# • DETACHING：解关联中
# • DETACHFAILED：解关联失败（2小时后将异步强制解关联）
# @type State: String
# @param AttachedTime: 关联时间。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AttachedTime: String
# @param Description: 备注
# @type Description: String
attr_accessor :CcnId, :CidrBlock, :State, :AttachedTime, :Description
def initialize(ccnid=nil, cidrblock=nil, state=nil, attachedtime=nil, description=nil)
@CcnId = ccnid
@CidrBlock = cidrblock
@State = state
@AttachedTime = attachedtime
@Description = description
end
def deserialize(params)
@CcnId = params['CcnId']
@CidrBlock = params['CidrBlock']
@State = params['State']
@AttachedTime = params['AttachedTime']
@Description = params['Description']
end
end
# 容器环境变量
class ContainerEnv < TencentCloud::Common::AbstractModel
# @param Key: 环境变量Key
# @type Key: String
# @param Value: 环境变量值
# @type Value: String
attr_accessor :Key, :Value
def initialize(key=nil, value=nil)
@Key = key
@Value = value
end
def deserialize(params)
@Key = params['Key']
@Value = params['Value']
end
end
# CreateBlueprint请求参数结构体
class CreateBlueprintRequest < TencentCloud::Common::AbstractModel
# @param BlueprintName: 镜像名称。最大长度60。
# @type BlueprintName: String
# @param Description: 镜像描述。最大长度60。
# @type Description: String
# @param InstanceId: 需要制作镜像的实例ID。
# @type InstanceId: String
attr_accessor :BlueprintName, :Description, :InstanceId
def initialize(blueprintname=nil, description=nil, instanceid=nil)
@BlueprintName = blueprintname
@Description = description
@InstanceId = instanceid
end
def deserialize(params)
@BlueprintName = params['BlueprintName']
@Description = params['Description']
@InstanceId = params['InstanceId']
end
end
# CreateBlueprint返回参数结构体
class CreateBlueprintResponse < TencentCloud::Common::AbstractModel
# @param BlueprintId: 自定义镜像ID。
# @type BlueprintId: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :BlueprintId, :RequestId
def initialize(blueprintid=nil, requestid=nil)
@BlueprintId = blueprintid
@RequestId = requestid
end
def deserialize(params)
@BlueprintId = params['BlueprintId']
@RequestId = params['RequestId']
end
end
# CreateDiskBackup请求参数结构体
class CreateDiskBackupRequest < TencentCloud::Common::AbstractModel
# @param DiskId: 云硬盘 ID。当前只支持数据盘创建备份点。
# @type DiskId: String
# @param DiskBackupName: 云硬盘备份点名称，最大长度90。
# @type DiskBackupName: String
attr_accessor :DiskId, :DiskBackupName
def initialize(diskid=nil, diskbackupname=nil)
@DiskId = diskid
@DiskBackupName = diskbackupname
end
def deserialize(params)
@DiskId = params['DiskId']
@DiskBackupName = params['DiskBackupName']
end
end
# CreateDiskBackup返回参数结构体
class CreateDiskBackupResponse < TencentCloud::Common::AbstractModel
# @param DiskBackupId: 备份点ID。
# @type DiskBackupId: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :DiskBackupId, :RequestId
def initialize(diskbackupid=nil, requestid=nil)
@DiskBackupId = diskbackupid
@RequestId = requestid
end
def deserialize(params)
@DiskBackupId = params['DiskBackupId']
@RequestId = params['RequestId']
end
end
# CreateFirewallRules请求参数结构体
class CreateFirewallRulesRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例 ID。
# @type InstanceId: String
# @param FirewallRules: 防火墙规则列表。
# @type FirewallRules: Array
# @param FirewallVersion: 防火墙当前版本。用户每次更新防火墙规则时版本会自动加1，防止规则已过期，不填不考虑冲突。
# @type FirewallVersion: Integer
attr_accessor :InstanceId, :FirewallRules, :FirewallVersion
def initialize(instanceid=nil, firewallrules=nil, firewallversion=nil)
@InstanceId = instanceid
@FirewallRules = firewallrules
@FirewallVersion = firewallversion
end
def deserialize(params)
@InstanceId = params['InstanceId']
unless params['FirewallRules'].nil?
@FirewallRules = []
params['FirewallRules'].each do |i|
firewallrule_tmp = FirewallRule.new
firewallrule_tmp.deserialize(i)
@FirewallRules << firewallrule_tmp
end
end
@FirewallVersion = params['FirewallVersion']
end
end
# CreateFirewallRules返回参数结构体
class CreateFirewallRulesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# CreateInstanceSnapshot请求参数结构体
class CreateInstanceSnapshotRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 需要创建快照的实例 ID。
# @type InstanceId: String
# @param SnapshotName: 快照名称，最长为 60 个字符。
# @type SnapshotName: String
attr_accessor :InstanceId, :SnapshotName
def initialize(instanceid=nil, snapshotname=nil)
@InstanceId = instanceid
@SnapshotName = snapshotname
end
def deserialize(params)
@InstanceId = params['InstanceId']
@SnapshotName = params['SnapshotName']
end
end
# CreateInstanceSnapshot返回参数结构体
class CreateInstanceSnapshotResponse < TencentCloud::Common::AbstractModel
# @param SnapshotId: 快照 ID。
# @type SnapshotId: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :SnapshotId, :RequestId
def initialize(snapshotid=nil, requestid=nil)
@SnapshotId = snapshotid
@RequestId = requestid
end
def deserialize(params)
@SnapshotId = params['SnapshotId']
@RequestId = params['RequestId']
end
end
# CreateInstances请求参数结构体
class CreateInstancesRequest < TencentCloud::Common::AbstractModel
# @param BundleId: 套餐ID。
# @type BundleId: String
# @param BlueprintId: 镜像ID。
# @type BlueprintId: String
# @param InstanceChargePrepaid: 当前实例仅支持预付费模式，即包年包月相关参数设置，单位（月）。通过该参数可以指定包年包月实例的购买时长、是否设置自动续费等属性。该参数必传。
# @type InstanceChargePrepaid: :class:`Tencentcloud::Lighthouse.v20200324.models.InstanceChargePrepaid`
# @param InstanceName: 实例显示名称。
# @type InstanceName: String
# @param InstanceCount: 购买实例数量。包年包月实例取值范围：[1，30]。默认取值：1。指定购买实例的数量不能超过用户所能购买的剩余配额数量
# @type InstanceCount: Integer
# @param Zones: 可用区列表。默认为随机可用区
# @type Zones: Array
# @param DryRun: 是否只预检此次请求。
# true：发送检查请求，不会创建实例。检查项包括是否填写了必需参数，请求格式，业务限制和库存。
# 如果检查不通过，则返回对应错误码；
# 如果检查通过，则返回RequestId.
# false（默认）：发送正常请求，通过检查后直接创建实例
# @type DryRun: Boolean
# @param ClientToken: 用于保证请求幂等性的字符串。该字符串由客户生成，需保证不同请求之间唯一，最大值不超过64个ASCII字符。若不指定该参数，则无法保证请求的幂等性。
# @type ClientToken: String
# @param LoginConfiguration: 实例登录密码信息配置。本字段目前仅支持WINDOWS实例进行密码设置。默认缺失情况下代表用户选择实例创建后设置登录密码。
# @type LoginConfiguration: :class:`Tencentcloud::Lighthouse.v20200324.models.LoginConfiguration`
# @param Containers: 要创建的容器配置列表。
# @type Containers: Array
# @param AutoVoucher: 是否自动使用代金券。默认不使用。
# @type AutoVoucher: Boolean
attr_accessor :BundleId, :BlueprintId, :InstanceChargePrepaid, :InstanceName, :InstanceCount, :Zones, :DryRun, :ClientToken, :LoginConfiguration, :Containers, :AutoVoucher
def initialize(bundleid=nil, blueprintid=nil, instancechargeprepaid=nil, instancename=nil, instancecount=nil, zones=nil, dryrun=nil, clienttoken=nil, loginconfiguration=nil, containers=nil, autovoucher=nil)
@BundleId = bundleid
@BlueprintId = blueprintid
@InstanceChargePrepaid = instancechargeprepaid
@InstanceName = instancename
@InstanceCount = instancecount
@Zones = zones
@DryRun = dryrun
@ClientToken = clienttoken
@LoginConfiguration = loginconfiguration
@Containers = containers
@AutoVoucher = autovoucher
end
def deserialize(params)
@BundleId = params['BundleId']
@BlueprintId = params['BlueprintId']
unless params['InstanceChargePrepaid'].nil?
@InstanceChargePrepaid = InstanceChargePrepaid.new
@InstanceChargePrepaid.deserialize(params['InstanceChargePrepaid'])
end
@InstanceName = params['InstanceName']
@InstanceCount = params['InstanceCount']
@Zones = params['Zones']
@DryRun = params['DryRun']
@ClientToken = params['ClientToken']
unless params['LoginConfiguration'].nil?
@LoginConfiguration = LoginConfiguration.new
@LoginConfiguration.deserialize(params['LoginConfiguration'])
end
unless params['Containers'].nil?
@Containers = []
params['Containers'].each do |i|
dockercontainerconfiguration_tmp = DockerContainerConfiguration.new
dockercontainerconfiguration_tmp.deserialize(i)
@Containers << dockercontainerconfiguration_tmp
end
end
@AutoVoucher = params['AutoVoucher']
end
end
# CreateInstances返回参数结构体
class CreateInstancesResponse < TencentCloud::Common::AbstractModel
# @param InstanceIdSet: 当通过本接口来创建实例时会返回该参数，表示一个或多个实例ID。返回实例ID列表并不代表实例创建成功。
# 可根据 DescribeInstances 接口查询返回的InstancesSet中对应实例的ID的状态来判断创建是否完成；如果实例状态由“启动中”变为“运行中”，则为创建成功。
# @type InstanceIdSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :InstanceIdSet, :RequestId
def initialize(instanceidset=nil, requestid=nil)
@InstanceIdSet = instanceidset
@RequestId = requestid
end
def deserialize(params)
@InstanceIdSet = params['InstanceIdSet']
@RequestId = params['RequestId']
end
end
# CreateKeyPair请求参数结构体
class CreateKeyPairRequest < TencentCloud::Common::AbstractModel
# @param KeyName: 密钥对名称，可由数字，字母和下划线组成，长度不超过 25 个字符。
# @type KeyName: String
attr_accessor :KeyName
def initialize(keyname=nil)
@KeyName = keyname
end
def deserialize(params)
@KeyName = params['KeyName']
end
end
# CreateKeyPair返回参数结构体
class CreateKeyPairResponse < TencentCloud::Common::AbstractModel
# @param KeyPair: 密钥对信息。
# @type KeyPair: :class:`Tencentcloud::Lighthouse.v20200324.models.KeyPair`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :KeyPair, :RequestId
def initialize(keypair=nil, requestid=nil)
@KeyPair = keypair
@RequestId = requestid
end
def deserialize(params)
unless params['KeyPair'].nil?
@KeyPair = KeyPair.new
@KeyPair.deserialize(params['KeyPair'])
end
@RequestId = params['RequestId']
end
end
# 数据盘价格
class DataDiskPrice < TencentCloud::Common::AbstractModel
# @param DiskId: 云硬盘ID。
# @type DiskId: String
# @param OriginalDiskPrice: 云硬盘单价。
# @type OriginalDiskPrice: Float
# @param OriginalPrice: 云硬盘总价。
# @type OriginalPrice: Float
# @param Discount: 折扣。
# @type Discount: Float
# @param DiscountPrice: 折后总价。
# @type DiscountPrice: Float
# @param InstanceId: 数据盘挂载的实例ID。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type InstanceId: String
attr_accessor :DiskId, :OriginalDiskPrice, :OriginalPrice, :Discount, :DiscountPrice, :InstanceId
def initialize(diskid=nil, originaldiskprice=nil, originalprice=nil, discount=nil, discountprice=nil, instanceid=nil)
@DiskId = diskid
@OriginalDiskPrice = originaldiskprice
@OriginalPrice = originalprice
@Discount = discount
@DiscountPrice = discountprice
@InstanceId = instanceid
end
def deserialize(params)
@DiskId = params['DiskId']
@OriginalDiskPrice = params['OriginalDiskPrice']
@OriginalPrice = params['OriginalPrice']
@Discount = params['Discount']
@DiscountPrice = params['DiscountPrice']
@InstanceId = params['InstanceId']
end
end
# DeleteBlueprints请求参数结构体
class DeleteBlueprintsRequest < TencentCloud::Common::AbstractModel
# @param BlueprintIds: 镜像ID列表。镜像ID，可通过[DescribeBlueprints](https://cloud.tencent.com/document/product/1207/47689)接口返回值中的BlueprintId获取。
# @type BlueprintIds: Array
attr_accessor :BlueprintIds
def initialize(blueprintids=nil)
@BlueprintIds = blueprintids
end
def deserialize(params)
@BlueprintIds = params['BlueprintIds']
end
end
# DeleteBlueprints返回参数结构体
class DeleteBlueprintsResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteDiskBackups请求参数结构体
class DeleteDiskBackupsRequest < TencentCloud::Common::AbstractModel
# @param DiskBackupIds: 云硬盘备份点ID列表，可通过 DescribeDiskBackups接口查询。
# @type DiskBackupIds: Array
attr_accessor :DiskBackupIds
def initialize(diskbackupids=nil)
@DiskBackupIds = diskbackupids
end
def deserialize(params)
@DiskBackupIds = params['DiskBackupIds']
end
end
# DeleteDiskBackups返回参数结构体
class DeleteDiskBackupsResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteFirewallRules请求参数结构体
class DeleteFirewallRulesRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例 ID。
# @type InstanceId: String
# @param FirewallRules: 防火墙规则列表。
# @type FirewallRules: Array
# @param FirewallVersion: 防火墙当前版本。用户每次更新防火墙规则时版本会自动加1，防止规则已过期，不填不考虑冲突。
# @type FirewallVersion: Integer
attr_accessor :InstanceId, :FirewallRules, :FirewallVersion
def initialize(instanceid=nil, firewallrules=nil, firewallversion=nil)
@InstanceId = instanceid
@FirewallRules = firewallrules
@FirewallVersion = firewallversion
end
def deserialize(params)
@InstanceId = params['InstanceId']
unless params['FirewallRules'].nil?
@FirewallRules = []
params['FirewallRules'].each do |i|
firewallrule_tmp = FirewallRule.new
firewallrule_tmp.deserialize(i)
@FirewallRules << firewallrule_tmp
end
end
@FirewallVersion = params['FirewallVersion']
end
end
# DeleteFirewallRules返回参数结构体
class DeleteFirewallRulesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteKeyPairs请求参数结构体
class DeleteKeyPairsRequest < TencentCloud::Common::AbstractModel
# @param KeyIds: 密钥对 ID 列表，每次请求批量密钥对的上限为 10。
# @type KeyIds: Array
attr_accessor :KeyIds
def initialize(keyids=nil)
@KeyIds = keyids
end
def deserialize(params)
@KeyIds = params['KeyIds']
end
end
# DeleteKeyPairs返回参数结构体
class DeleteKeyPairsResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteSnapshots请求参数结构体
class DeleteSnapshotsRequest < TencentCloud::Common::AbstractModel
# @param SnapshotIds: 要删除的快照 ID 列表，可通过 DescribeSnapshots 查询。
# @type SnapshotIds: Array
attr_accessor :SnapshotIds
def initialize(snapshotids=nil)
@SnapshotIds = snapshotids
end
def deserialize(params)
@SnapshotIds = params['SnapshotIds']
end
end
# DeleteSnapshots返回参数结构体
class DeleteSnapshotsResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# 限制操作。
class DeniedAction < TencentCloud::Common::AbstractModel
# @param Action: 限制操作名。
# @type Action: String
# @param Code: 限制操作消息码。
# @type Code: String
# @param Message: 限制操作消息。
# @type Message: String
attr_accessor :Action, :Code, :Message
def initialize(action=nil, code=nil, message=nil)
@Action = action
@Code = code
@Message = message
end
def deserialize(params)
@Action = params['Action']
@Code = params['Code']
@Message = params['Message']
end
end
# DescribeAllScenes请求参数结构体
class DescribeAllScenesRequest < TencentCloud::Common::AbstractModel
# @param SceneIds: 使用场景ID列表。
# @type SceneIds: Array
# @param Offset: 偏移量，默认为 0。
# @type Offset: Integer
# @param Limit: 返回数量，默认为 20，最大值为 100。
# @type Limit: Integer
attr_accessor :SceneIds, :Offset, :Limit
def initialize(sceneids=nil, offset=nil, limit=nil)
@SceneIds = sceneids
@Offset = offset
@Limit = limit
end
def deserialize(params)
@SceneIds = params['SceneIds']
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribeAllScenes返回参数结构体
class DescribeAllScenesResponse < TencentCloud::Common::AbstractModel
# @param SceneInfoSet: 使用场景详细信息列表。
# @type SceneInfoSet: Array
# @param TotalCount: 使用场景详细信息总数量。
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :SceneInfoSet, :TotalCount, :RequestId
def initialize(sceneinfoset=nil, totalcount=nil, requestid=nil)
@SceneInfoSet = sceneinfoset
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['SceneInfoSet'].nil?
@SceneInfoSet = []
params['SceneInfoSet'].each do |i|
sceneinfo_tmp = SceneInfo.new
sceneinfo_tmp.deserialize(i)
@SceneInfoSet << sceneinfo_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeBlueprintInstances请求参数结构体
class DescribeBlueprintInstancesRequest < TencentCloud::Common::AbstractModel
# @param InstanceIds: 实例 ID 列表，当前最多支持 1 个。
# @type InstanceIds: Array
attr_accessor :InstanceIds
def initialize(instanceids=nil)
@InstanceIds = instanceids
end
def deserialize(params)
@InstanceIds = params['InstanceIds']
end
end
# DescribeBlueprintInstances返回参数结构体
class DescribeBlueprintInstancesResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 符合条件的镜像实例数量。
# @type TotalCount: Integer
# @param BlueprintInstanceSet: 镜像实例列表信息。
# @type BlueprintInstanceSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :BlueprintInstanceSet, :RequestId
def initialize(totalcount=nil, blueprintinstanceset=nil, requestid=nil)
@TotalCount = totalcount
@BlueprintInstanceSet = blueprintinstanceset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['BlueprintInstanceSet'].nil?
@BlueprintInstanceSet = []
params['BlueprintInstanceSet'].each do |i|
blueprintinstance_tmp = BlueprintInstance.new
blueprintinstance_tmp.deserialize(i)
@BlueprintInstanceSet << blueprintinstance_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeBlueprints请求参数结构体
class DescribeBlueprintsRequest < TencentCloud::Common::AbstractModel
# @param BlueprintIds: 镜像 ID 列表。
# @type BlueprintIds: Array
# @param Offset: 偏移量，默认为 0。关于`Offset`的更进一步介绍请参考 API [简介](https://cloud.tencent.com/document/product/1207/47578)中的相关小节。
# @type Offset: Integer
# @param Limit: 返回数量，默认为 20，最大值为 100。关于`Limit`的更进一步介绍请参考 API [简介](https://cloud.tencent.com/document/product/1207/47578)中的相关小节。
# @type Limit: Integer
# @param Filters: 过滤器列表。
# blueprint-id按照【镜像 ID】进行过滤。
# 类型：String
# 必选：否
# blueprint-type按照【镜像类型】进行过滤。
# 取值：APP_OS（应用镜像 ）；PURE_OS（系统镜像）；PRIVATE（自定义镜像）；SHARED（共享镜像）。
# 类型：String
# 必选：否
# platform-type按照【镜像平台类型】进行过滤。
# 取值： LINUX_UNIX（Linux/Unix系统）；WINDOWS（Windows 系统）。
# 类型：String
# 必选：否
# blueprint-name按照【镜像名称】进行过滤。
# 类型：String
# 必选：否
# blueprint-state按照【镜像状态】进行过滤。
# 类型：String
# 必选：否
# scene-id按照【使用场景Id】进行过滤。
# 类型：String
# 必选：否
# 每次请求的 Filters 的上限为 10，Filter.Values 的上限为 100。参数不支持同时指定 BlueprintIds 和 Filters 。
# @type Filters: Array
attr_accessor :BlueprintIds, :Offset, :Limit, :Filters
def initialize(blueprintids=nil, offset=nil, limit=nil, filters=nil)
@BlueprintIds = blueprintids
@Offset = offset
@Limit = limit
@Filters = filters
end
def deserialize(params)
@BlueprintIds = params['BlueprintIds']
@Offset = params['Offset']
@Limit = params['Limit']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
end
end
# DescribeBlueprints返回参数结构体
class DescribeBlueprintsResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 符合条件的镜像数量。
# @type TotalCount: Integer
# @param BlueprintSet: 镜像详细信息列表。
# @type BlueprintSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :BlueprintSet, :RequestId
def initialize(totalcount=nil, blueprintset=nil, requestid=nil)
@TotalCount = totalcount
@BlueprintSet = blueprintset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['BlueprintSet'].nil?
@BlueprintSet = []
params['BlueprintSet'].each do |i|
blueprint_tmp = Blueprint.new
blueprint_tmp.deserialize(i)
@BlueprintSet << blueprint_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeBundleDiscount请求参数结构体
class DescribeBundleDiscountRequest < TencentCloud::Common::AbstractModel
# @param BundleId: 套餐 ID。
# @type BundleId: String
attr_accessor :BundleId
def initialize(bundleid=nil)
@BundleId = bundleid
end
def deserialize(params)
@BundleId = params['BundleId']
end
end
# DescribeBundleDiscount返回参数结构体
class DescribeBundleDiscountResponse < TencentCloud::Common::AbstractModel
# @param Currency: 币种：CNY人民币，USD 美元。
# @type Currency: String
# @param DiscountDetail: 折扣梯度详情，每个梯度包含的信息有：时长，折扣数，总价，折扣价，折扣详情（用户折扣、官网折扣、最终折扣）。
# @type DiscountDetail: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Currency, :DiscountDetail, :RequestId
def initialize(currency=nil, discountdetail=nil, requestid=nil)
@Currency = currency
@DiscountDetail = discountdetail
@RequestId = requestid
end
def deserialize(params)
@Currency = params['Currency']
unless params['DiscountDetail'].nil?
@DiscountDetail = []
params['DiscountDetail'].each do |i|
discountdetail_tmp = DiscountDetail.new
discountdetail_tmp.deserialize(i)
@DiscountDetail << discountdetail_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeBundles请求参数结构体
class DescribeBundlesRequest < TencentCloud::Common::AbstractModel
# @param BundleIds: 套餐 ID 列表。
# @type BundleIds: Array
# @param Offset: 偏移量，默认为 0。关于`Offset`的更进一步介绍请参考 API [简介](https://cloud.tencent.com/document/product/1207/47578)中的相关小节。
# @type Offset: Integer
# @param Limit: 返回数量，默认为 20，最大值为 100。关于`Limit`的更进一步介绍请参考 API [简介](https://cloud.tencent.com/document/product/1207/47578)中的相关小节。
# @type Limit: Integer
# @param Filters: 过滤器列表。
# bundle-id按照【套餐 ID】进行过滤。
# 类型：String
# 必选：否
# support-platform-type按照【系统类型】进行过滤。
# 取值： LINUX_UNIX（Linux/Unix系统）；WINDOWS（Windows 系统）
# 类型：String
# 必选：否
# bundle-type按照 【套餐类型进行过滤】。
# 取值：GENERAL_BUNDLE (通用型套餐); STORAGE_BUNDLE(存储型套餐);ENTERPRISE_BUNDLE( 企业型套餐);EXCLUSIVE_BUNDLE(专属型套餐);BEFAST_BUNDLE(蜂驰型套餐);
# 类型：String
# 必选：否
# bundle-state按照【套餐状态】进行过滤。
# 取值: ‘ONLINE’(在线); ‘OFFLINE’(下线);
# 类型：String
# 必选：否
# 每次请求的 Filters 的上限为 10，Filter.Values 的上限为 5。参数不支持同时指定 BundleIds 和 Filters。
# @type Filters: Array
# @param Zones: 可用区列表。默认为全部可用区。
# @type Zones: Array
attr_accessor :BundleIds, :Offset, :Limit, :Filters, :Zones
def initialize(bundleids=nil, offset=nil, limit=nil, filters=nil, zones=nil)
@BundleIds = bundleids
@Offset = offset
@Limit = limit
@Filters = filters
@Zones = zones
end
def deserialize(params)
@BundleIds = params['BundleIds']
@Offset = params['Offset']
@Limit = params['Limit']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
@Zones = params['Zones']
end
end
# DescribeBundles返回参数结构体
class DescribeBundlesResponse < TencentCloud::Common::AbstractModel
# @param BundleSet: 套餐详细信息列表。
# @type BundleSet: Array
# @param TotalCount: 符合要求的套餐总数，用于分页展示。
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :BundleSet, :TotalCount, :RequestId
def initialize(bundleset=nil, totalcount=nil, requestid=nil)
@BundleSet = bundleset
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['BundleSet'].nil?
@BundleSet = []
params['BundleSet'].each do |i|
bundle_tmp = Bundle.new
bundle_tmp.deserialize(i)
@BundleSet << bundle_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeCcnAttachedInstances请求参数结构体
class DescribeCcnAttachedInstancesRequest < TencentCloud::Common::AbstractModel
def initialize()
end
def deserialize(params)
end
end
# DescribeCcnAttachedInstances返回参数结构体
class DescribeCcnAttachedInstancesResponse < TencentCloud::Common::AbstractModel
# @param CcnAttachedInstanceSet: 云联网关联的实例列表。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CcnAttachedInstanceSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :CcnAttachedInstanceSet, :RequestId
def initialize(ccnattachedinstanceset=nil, requestid=nil)
@CcnAttachedInstanceSet = ccnattachedinstanceset
@RequestId = requestid
end
def deserialize(params)
unless params['CcnAttachedInstanceSet'].nil?
@CcnAttachedInstanceSet = []
params['CcnAttachedInstanceSet'].each do |i|
ccnattachedinstance_tmp = CcnAttachedInstance.new
ccnattachedinstance_tmp.deserialize(i)
@CcnAttachedInstanceSet << ccnattachedinstance_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeDiskBackupsDeniedActions请求参数结构体
class DescribeDiskBackupsDeniedActionsRequest < TencentCloud::Common::AbstractModel
# @param DiskBackupIds: 云硬盘备份点 ID 列表, 可通过 DescribeDiskBackups 接口查询。
# @type DiskBackupIds: Array
attr_accessor :DiskBackupIds
def initialize(diskbackupids=nil)
@DiskBackupIds = diskbackupids
end
def deserialize(params)
@DiskBackupIds = params['DiskBackupIds']
end
end
# DescribeDiskBackupsDeniedActions返回参数结构体
class DescribeDiskBackupsDeniedActionsResponse < TencentCloud::Common::AbstractModel
# @param DiskBackupDeniedActionSet: 云硬盘备份点操作限制列表详细信息。
# @type DiskBackupDeniedActionSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :DiskBackupDeniedActionSet, :RequestId
def initialize(diskbackupdeniedactionset=nil, requestid=nil)
@DiskBackupDeniedActionSet = diskbackupdeniedactionset
@RequestId = requestid
end
def deserialize(params)
unless params['DiskBackupDeniedActionSet'].nil?
@DiskBackupDeniedActionSet = []
params['DiskBackupDeniedActionSet'].each do |i|
diskbackupdeniedactions_tmp = DiskBackupDeniedActions.new
diskbackupdeniedactions_tmp.deserialize(i)
@DiskBackupDeniedActionSet << diskbackupdeniedactions_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeDiskBackups请求参数结构体
class DescribeDiskBackupsRequest < TencentCloud::Common::AbstractModel
# @param DiskBackupIds: 要查询云硬盘备份点的ID列表。参数不支持同时指定 DiskBackupIds 和 Filters。
# @type DiskBackupIds: Array
# @param Filters: 过滤器列表。
# disk-backup-id按照【云硬盘备份点 ID】进行过滤。
# 类型：String
# 必选：否
# disk-id按照【云硬盘 ID】进行过滤。
# 类型：String
# 必选：否
# disk-backup-state按照【云硬盘备份点状态】进行过滤。
# 类型：String
# 必选：否
# 取值：参考数据结构DiskBackup下的DiskBackupState取值。
# disk-usage按照【云硬盘类型】进行过滤。
# 类型：String
# 必选：否
# 取值：SYSTEM_DISK或DATA_DISK
# 每次请求的 Filters 的上限为 10，Filter.Values 的上限为5。参数不支持同时指定DiskBackupIds 和 Filters。
# @type Filters: Array
# @param Offset: 偏移量，默认为 0。
# @type Offset: Integer
# @param Limit: 返回数量，默认为 20，最大值为 100。
# @type Limit: Integer
attr_accessor :DiskBackupIds, :Filters, :Offset, :Limit
def initialize(diskbackupids=nil, filters=nil, offset=nil, limit=nil)
@DiskBackupIds = diskbackupids
@Filters = filters
@Offset = offset
@Limit = limit
end
def deserialize(params)
@DiskBackupIds = params['DiskBackupIds']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribeDiskBackups返回参数结构体
class DescribeDiskBackupsResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 云硬盘备份点的数量。
# @type TotalCount: Integer
# @param DiskBackupSet: 云硬盘备份点信息列表。
# @type DiskBackupSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :DiskBackupSet, :RequestId
def initialize(totalcount=nil, diskbackupset=nil, requestid=nil)
@TotalCount = totalcount
@DiskBackupSet = diskbackupset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['DiskBackupSet'].nil?
@DiskBackupSet = []
params['DiskBackupSet'].each do |i|
diskbackup_tmp = DiskBackup.new
diskbackup_tmp.deserialize(i)
@DiskBackupSet << diskbackup_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeDiskConfigs请求参数结构体
class DescribeDiskConfigsRequest < TencentCloud::Common::AbstractModel
# @param Filters: 过滤器列表。
# zone按照【可用区】进行过滤。
# 类型：String
# 必选：否
# @type Filters: Array
attr_accessor :Filters
def initialize(filters=nil)
@Filters = filters
end
def deserialize(params)
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
end
end
# DescribeDiskConfigs返回参数结构体
class DescribeDiskConfigsResponse < TencentCloud::Common::AbstractModel
# @param DiskConfigSet: 云硬盘配置列表。
# @type DiskConfigSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :DiskConfigSet, :RequestId
def initialize(diskconfigset=nil, requestid=nil)
@DiskConfigSet = diskconfigset
@RequestId = requestid
end
def deserialize(params)
unless params['DiskConfigSet'].nil?
@DiskConfigSet = []
params['DiskConfigSet'].each do |i|
diskconfig_tmp = DiskConfig.new
diskconfig_tmp.deserialize(i)
@DiskConfigSet << diskconfig_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeDiskDiscount请求参数结构体
class DescribeDiskDiscountRequest < TencentCloud::Common::AbstractModel
# @param DiskType: 云硬盘类型, 取值: "CLOUD_PREMIUM"。
# @type DiskType: String
# @param DiskSize: 云硬盘大小。
# @type DiskSize: Integer
# @param DiskBackupQuota: 指定云硬盘备份点配额，不传时默认为不带备份点配额。目前只支持不带或设置1个云硬盘备份点配额。
# @type DiskBackupQuota: Integer
attr_accessor :DiskType, :DiskSize, :DiskBackupQuota
def initialize(disktype=nil, disksize=nil, diskbackupquota=nil)
@DiskType = disktype
@DiskSize = disksize
@DiskBackupQuota = diskbackupquota
end
def deserialize(params)
@DiskType = params['DiskType']
@DiskSize = params['DiskSize']
@DiskBackupQuota = params['DiskBackupQuota']
end
end
# DescribeDiskDiscount返回参数结构体
class DescribeDiskDiscountResponse < TencentCloud::Common::AbstractModel
# @param Currency: 币种：CNY人民币，USD 美元。
# @type Currency: String
# @param DiscountDetail: 折扣梯度详情，每个梯度包含的信息有：时长，折扣数，总价，折扣价，折扣详情（用户折扣、官网折扣、最终折扣）。
# @type DiscountDetail: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Currency, :DiscountDetail, :RequestId
def initialize(currency=nil, discountdetail=nil, requestid=nil)
@Currency = currency
@DiscountDetail = discountdetail
@RequestId = requestid
end
def deserialize(params)
@Currency = params['Currency']
unless params['DiscountDetail'].nil?
@DiscountDetail = []
params['DiscountDetail'].each do |i|
discountdetail_tmp = DiscountDetail.new
discountdetail_tmp.deserialize(i)
@DiscountDetail << discountdetail_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeDisksDeniedActions请求参数结构体
class DescribeDisksDeniedActionsRequest < TencentCloud::Common::AbstractModel
# @param DiskIds: 云硬盘ID列表。
# @type DiskIds: Array
attr_accessor :DiskIds
def initialize(diskids=nil)
@DiskIds = diskids
end
def deserialize(params)
@DiskIds = params['DiskIds']
end
end
# DescribeDisksDeniedActions返回参数结构体
class DescribeDisksDeniedActionsResponse < TencentCloud::Common::AbstractModel
# @param DiskDeniedActionSet: 云硬盘操作限制列表详细信息。
# @type DiskDeniedActionSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :DiskDeniedActionSet, :RequestId
def initialize(diskdeniedactionset=nil, requestid=nil)
@DiskDeniedActionSet = diskdeniedactionset
@RequestId = requestid
end
def deserialize(params)
unless params['DiskDeniedActionSet'].nil?
@DiskDeniedActionSet = []
params['DiskDeniedActionSet'].each do |i|
diskdeniedactions_tmp = DiskDeniedActions.new
diskdeniedactions_tmp.deserialize(i)
@DiskDeniedActionSet << diskdeniedactions_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeDisks请求参数结构体
class DescribeDisksRequest < TencentCloud::Common::AbstractModel
# @param DiskIds: 云硬盘ID列表。
# @type DiskIds: Array
# @param Filters: 过滤器列表。
# disk-id
# 按照【云硬盘 ID】进行过滤。
# 类型：String
# 必选：否
# instance-id
# 按照【实例ID】进行过滤。
# 类型：String
# 必选：否
# disk-name
# 按照【云硬盘名称】进行过滤。
# 类型：String
# 必选：否
# zone
# 按照【可用区】进行过滤。
# 类型：String
# 必选：否
# disk-usage
# 按照【云硬盘类型】进行过滤。
# 类型：String
# 必选：否
# 取值：SYSTEM_DISK或DATA_DISK
# disk-state
# 按照【云硬盘状态】进行过滤。
# 类型：String
# 必选：否
# 取值：参考数据结构[Disk](https://cloud.tencent.com/document/api/1207/47576#Disk)中DiskState取值。
# 每次请求的 Filters 的上限为 10，Filter.Values 的上限为 100。参数不支持同时指定 DiskIds 和 Filters。
# @type Filters: Array
# @param Limit: 返回数量，默认为20，最大值为100。
# @type Limit: Integer
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
# @param OrderField: 云硬盘列表排序的依据字段。取值范围："CREATED_TIME"：依据云硬盘的创建时间排序。 "EXPIRED_TIME"：依据云硬盘的到期时间排序。"DISK_SIZE"：依据云硬盘的大小排序。默认按云硬盘创建时间排序。
# @type OrderField: String
# @param Order: 输出云硬盘列表的排列顺序。取值范围："ASC"：升序排列。 "DESC"：降序排列。默认按降序排列。
# @type Order: String
attr_accessor :DiskIds, :Filters, :Limit, :Offset, :OrderField, :Order
def initialize(diskids=nil, filters=nil, limit=nil, offset=nil, orderfield=nil, order=nil)
@DiskIds = diskids
@Filters = filters
@Limit = limit
@Offset = offset
@OrderField = orderfield
@Order = order
end
def deserialize(params)
@DiskIds = params['DiskIds']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
@Limit = params['Limit']
@Offset = params['Offset']
@OrderField = params['OrderField']
@Order = params['Order']
end
end
# DescribeDisks返回参数结构体
class DescribeDisksResponse < TencentCloud::Common::AbstractModel
# @param DiskSet: 云硬盘信息列表。
# @type DiskSet: Array
# @param TotalCount: 符合条件的云硬盘信息数量。
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :DiskSet, :TotalCount, :RequestId
def initialize(diskset=nil, totalcount=nil, requestid=nil)
@DiskSet = diskset
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['DiskSet'].nil?
@DiskSet = []
params['DiskSet'].each do |i|
disk_tmp = Disk.new
disk_tmp.deserialize(i)
@DiskSet << disk_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeDisksReturnable请求参数结构体
class DescribeDisksReturnableRequest < TencentCloud::Common::AbstractModel
# @param DiskIds: 云硬盘ID列表。
# @type DiskIds: Array
# @param Limit: 返回数量，默认为20，最大值为100。
# @type Limit: Integer
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
attr_accessor :DiskIds, :Limit, :Offset
def initialize(diskids=nil, limit=nil, offset=nil)
@DiskIds = diskids
@Limit = limit
@Offset = offset
end
def deserialize(params)
@DiskIds = params['DiskIds']
@Limit = params['Limit']
@Offset = params['Offset']
end
end
# DescribeDisksReturnable返回参数结构体
class DescribeDisksReturnableResponse < TencentCloud::Common::AbstractModel
# @param DiskReturnableSet: 可退还云硬盘详细信息列表。
# @type DiskReturnableSet: Array
# @param TotalCount: 符合条件的云硬盘数量。
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :DiskReturnableSet, :TotalCount, :RequestId
def initialize(diskreturnableset=nil, totalcount=nil, requestid=nil)
@DiskReturnableSet = diskreturnableset
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['DiskReturnableSet'].nil?
@DiskReturnableSet = []
params['DiskReturnableSet'].each do |i|
diskreturnable_tmp = DiskReturnable.new
diskreturnable_tmp.deserialize(i)
@DiskReturnableSet << diskreturnable_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeFirewallRules请求参数结构体
class DescribeFirewallRulesRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例 ID。
# @type InstanceId: String
# @param Offset: 偏移量，默认为 0。
# @type Offset: Integer
# @param Limit: 返回数量，默认为 20，最大值为 100。
# @type Limit: Integer
attr_accessor :InstanceId, :Offset, :Limit
def initialize(instanceid=nil, offset=nil, limit=nil)
@InstanceId = instanceid
@Offset = offset
@Limit = limit
end
def deserialize(params)
@InstanceId = params['InstanceId']
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribeFirewallRules返回参数结构体
class DescribeFirewallRulesResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 符合条件的防火墙规则数量。
# @type TotalCount: Integer
# @param FirewallRuleSet: 防火墙规则详细信息列表。
# @type FirewallRuleSet: Array
# @param FirewallVersion: 防火墙版本号。
# @type FirewallVersion: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :FirewallRuleSet, :FirewallVersion, :RequestId
def initialize(totalcount=nil, firewallruleset=nil, firewallversion=nil, requestid=nil)
@TotalCount = totalcount
@FirewallRuleSet = firewallruleset
@FirewallVersion = firewallversion
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['FirewallRuleSet'].nil?
@FirewallRuleSet = []
params['FirewallRuleSet'].each do |i|
firewallruleinfo_tmp = FirewallRuleInfo.new
firewallruleinfo_tmp.deserialize(i)
@FirewallRuleSet << firewallruleinfo_tmp
end
end
@FirewallVersion = params['FirewallVersion']
@RequestId = params['RequestId']
end
end
# DescribeFirewallRulesTemplate请求参数结构体
class DescribeFirewallRulesTemplateRequest < TencentCloud::Common::AbstractModel
def initialize()
end
def deserialize(params)
end
end
# DescribeFirewallRulesTemplate返回参数结构体
class DescribeFirewallRulesTemplateResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 符合条件的防火墙规则数量。
# @type TotalCount: Integer
# @param FirewallRuleSet: 防火墙规则详细信息列表。
# @type FirewallRuleSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :FirewallRuleSet, :RequestId
def initialize(totalcount=nil, firewallruleset=nil, requestid=nil)
@TotalCount = totalcount
@FirewallRuleSet = firewallruleset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['FirewallRuleSet'].nil?
@FirewallRuleSet = []
params['FirewallRuleSet'].each do |i|
firewallruleinfo_tmp = FirewallRuleInfo.new
firewallruleinfo_tmp.deserialize(i)
@FirewallRuleSet << firewallruleinfo_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeGeneralResourceQuotas请求参数结构体
class DescribeGeneralResourceQuotasRequest < TencentCloud::Common::AbstractModel
# @param ResourceNames: 资源名列表，可取值:
# - GENERAL_BUNDLE_INSTANCE 通用型套餐实例
# - STORAGE_BUNDLE_INSTANCE 存储型套餐实例
# - ENTERPRISE_BUNDLE_INSTANCE 企业型套餐实例
# - EXCLUSIVE_BUNDLE_INSTANCE 专属型套餐实例
# - BEFAST_BUNDLE_INSTANCE 蜂驰型套餐实例
# - USER_KEY_PAIR 密钥对
# - SNAPSHOT 快照
# - BLUEPRINT 自定义镜像
# - FREE_BLUEPRINT 免费自定义镜像
# - DATA_DISK 数据盘
# - FIREWALL_RULE 防火墙规则
# @type ResourceNames: Array
attr_accessor :ResourceNames
def initialize(resourcenames=nil)
@ResourceNames = resourcenames
end
def deserialize(params)
@ResourceNames = params['ResourceNames']
end
end
# DescribeGeneralResourceQuotas返回参数结构体
class DescribeGeneralResourceQuotasResponse < TencentCloud::Common::AbstractModel
# @param GeneralResourceQuotaSet: 通用资源配额详细信息列表。
# @type GeneralResourceQuotaSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :GeneralResourceQuotaSet, :RequestId
def initialize(generalresourcequotaset=nil, requestid=nil)
@GeneralResourceQuotaSet = generalresourcequotaset
@RequestId = requestid
end
def deserialize(params)
unless params['GeneralResourceQuotaSet'].nil?
@GeneralResourceQuotaSet = []
params['GeneralResourceQuotaSet'].each do |i|
generalresourcequota_tmp = GeneralResourceQuota.new
generalresourcequota_tmp.deserialize(i)
@GeneralResourceQuotaSet << generalresourcequota_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeInstanceLoginKeyPairAttribute请求参数结构体
class DescribeInstanceLoginKeyPairAttributeRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID。
# @type InstanceId: String
attr_accessor :InstanceId
def initialize(instanceid=nil)
@InstanceId = instanceid
end
def deserialize(params)
@InstanceId = params['InstanceId']
end
end
# DescribeInstanceLoginKeyPairAttribute返回参数结构体
class DescribeInstanceLoginKeyPairAttributeResponse < TencentCloud::Common::AbstractModel
# @param PermitLogin: 是否允许使用默认密钥对登录，YES：允许登录 NO：禁止登录。
# @type PermitLogin: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :PermitLogin, :RequestId
def initialize(permitlogin=nil, requestid=nil)
@PermitLogin = permitlogin
@RequestId = requestid
end
def deserialize(params)
@PermitLogin = params['PermitLogin']
@RequestId = params['RequestId']
end
end
# DescribeInstanceVncUrl请求参数结构体
class DescribeInstanceVncUrlRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例 ID。可通过[DescribeInstances](https://cloud.tencent.com/document/api/1207/47573)接口返回值中的InstanceId获取。
# @type InstanceId: String
attr_accessor :InstanceId
def initialize(instanceid=nil)
@InstanceId = instanceid
end
def deserialize(params)
@InstanceId = params['InstanceId']
end
end
# DescribeInstanceVncUrl返回参数结构体
class DescribeInstanceVncUrlResponse < TencentCloud::Common::AbstractModel
# @param InstanceVncUrl: 实例的管理终端地址。
# @type InstanceVncUrl: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :InstanceVncUrl, :RequestId
def initialize(instancevncurl=nil, requestid=nil)
@InstanceVncUrl = instancevncurl
@RequestId = requestid
end
def deserialize(params)
@InstanceVncUrl = params['InstanceVncUrl']
@RequestId = params['RequestId']
end
end
# DescribeInstancesDeniedActions请求参数结构体
class DescribeInstancesDeniedActionsRequest < TencentCloud::Common::AbstractModel
# @param InstanceIds: 实例 ID 列表。每次请求批量实例的上限为 100。可通过[DescribeInstances](https://cloud.tencent.com/document/api/1207/47573)接口返回值中的InstanceId获取。
# @type InstanceIds: Array
attr_accessor :InstanceIds
def initialize(instanceids=nil)
@InstanceIds = instanceids
end
def deserialize(params)
@InstanceIds = params['InstanceIds']
end
end
# DescribeInstancesDeniedActions返回参数结构体
class DescribeInstancesDeniedActionsResponse < TencentCloud::Common::AbstractModel
# @param InstanceDeniedActionSet: 实例操作限制列表详细信息。
# @type InstanceDeniedActionSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :InstanceDeniedActionSet, :RequestId
def initialize(instancedeniedactionset=nil, requestid=nil)
@InstanceDeniedActionSet = instancedeniedactionset
@RequestId = requestid
end
def deserialize(params)
unless params['InstanceDeniedActionSet'].nil?
@InstanceDeniedActionSet = []
params['InstanceDeniedActionSet'].each do |i|
instancedeniedactions_tmp = InstanceDeniedActions.new
instancedeniedactions_tmp.deserialize(i)
@InstanceDeniedActionSet << instancedeniedactions_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeInstancesDiskNum请求参数结构体
class DescribeInstancesDiskNumRequest < TencentCloud::Common::AbstractModel
# @param InstanceIds: 实例ID列表。
# @type InstanceIds: Array
attr_accessor :InstanceIds
def initialize(instanceids=nil)
@InstanceIds = instanceids
end
def deserialize(params)
@InstanceIds = params['InstanceIds']
end
end
# DescribeInstancesDiskNum返回参数结构体
class DescribeInstancesDiskNumResponse < TencentCloud::Common::AbstractModel
# @param AttachDetailSet: 挂载信息列表
# @type AttachDetailSet: Array
# @param TotalCount: 挂载信息数量
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :AttachDetailSet, :TotalCount, :RequestId
def initialize(attachdetailset=nil, totalcount=nil, requestid=nil)
@AttachDetailSet = attachdetailset
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['AttachDetailSet'].nil?
@AttachDetailSet = []
params['AttachDetailSet'].each do |i|
attachdetail_tmp = AttachDetail.new
attachdetail_tmp.deserialize(i)
@AttachDetailSet << attachdetail_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeInstances请求参数结构体
class DescribeInstancesRequest < TencentCloud::Common::AbstractModel
# @param InstanceIds: 实例 ID 列表。每次请求批量实例的上限为 100。
# @type InstanceIds: Array
# @param Filters: 过滤器列表。
# instance-name按照【实例名称】进行过滤。
# 类型：String
# 必选：否
# private-ip-address按照【实例主网卡的内网 IP】进行过滤。
# 类型：String
# 必选：否
# public-ip-address按照【实例主网卡的公网 IP】进行过滤。
# 类型：String
# 必选：否
# zone按照【可用区】进行过滤。
# 类型：String
# 必选：否
# instance-state按照【实例状态】进行过滤。
# 类型：String
# 必选：否
# 每次请求的 Filters 的上限为 10，Filter.Values 的上限为 100。参数不支持同时指定 InstanceIds 和 Filters。
# @type Filters: Array
# @param Offset: 偏移量，默认为 0。关于`Offset`的更进一步介绍请参考 API [简介](https://cloud.tencent.com/document/product/1207/47578)中的相关小节。
# @type Offset: Integer
# @param Limit: 返回数量，默认为 20，最大值为 100。关于`Limit`的更进一步介绍请参考 API [简介](https://cloud.tencent.com/document/product/1207/47578)中的相关小节。
# @type Limit: Integer
attr_accessor :InstanceIds, :Filters, :Offset, :Limit
def initialize(instanceids=nil, filters=nil, offset=nil, limit=nil)
@InstanceIds = instanceids
@Filters = filters
@Offset = offset
@Limit = limit
end
def deserialize(params)
@InstanceIds = params['InstanceIds']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribeInstances返回参数结构体
class DescribeInstancesResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 符合条件的实例数量。
# @type TotalCount: Integer
# @param InstanceSet: 实例详细信息列表。
# @type InstanceSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :InstanceSet, :RequestId
def initialize(totalcount=nil, instanceset=nil, requestid=nil)
@TotalCount = totalcount
@InstanceSet = instanceset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['InstanceSet'].nil?
@InstanceSet = []
params['InstanceSet'].each do |i|
instance_tmp = Instance.new
instance_tmp.deserialize(i)
@InstanceSet << instance_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeInstancesReturnable请求参数结构体
class DescribeInstancesReturnableRequest < TencentCloud::Common::AbstractModel
# @param InstanceIds: 实例 ID 列表。每次请求批量实例的上限为 100。可通过[DescribeInstances](https://cloud.tencent.com/document/api/1207/47573)接口返回值中的InstanceId获取。
# @type InstanceIds: Array
# @param Offset: 偏移量，默认为 0。
# @type Offset: Integer
# @param Limit: 返回数量，默认为 20，最大值为 100。
# @type Limit: Integer
attr_accessor :InstanceIds, :Offset, :Limit
def initialize(instanceids=nil, offset=nil, limit=nil)
@InstanceIds = instanceids
@Offset = offset
@Limit = limit
end
def deserialize(params)
@InstanceIds = params['InstanceIds']
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribeInstancesReturnable返回参数结构体
class DescribeInstancesReturnableResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 符合条件的实例数量。
# @type TotalCount: Integer
# @param InstanceReturnableSet: 可退还实例详细信息列表。
# @type InstanceReturnableSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :InstanceReturnableSet, :RequestId
def initialize(totalcount=nil, instancereturnableset=nil, requestid=nil)
@TotalCount = totalcount
@InstanceReturnableSet = instancereturnableset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['InstanceReturnableSet'].nil?
@InstanceReturnableSet = []
params['InstanceReturnableSet'].each do |i|
instancereturnable_tmp = InstanceReturnable.new
instancereturnable_tmp.deserialize(i)
@InstanceReturnableSet << instancereturnable_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeInstancesTrafficPackages请求参数结构体
class DescribeInstancesTrafficPackagesRequest < TencentCloud::Common::AbstractModel
# @param InstanceIds: 实例 ID 列表。每次请求批量实例的上限为 100。可通过[DescribeInstances](https://cloud.tencent.com/document/api/1207/47573)接口返回值中的InstanceId获取。
# @type InstanceIds: Array
# @param Offset: 偏移量，默认为 0。
# @type Offset: Integer
# @param Limit: 返回数量，默认为 20，最大值为 100。
# @type Limit: Integer
attr_accessor :InstanceIds, :Offset, :Limit
def initialize(instanceids=nil, offset=nil, limit=nil)
@InstanceIds = instanceids
@Offset = offset
@Limit = limit
end
def deserialize(params)
@InstanceIds = params['InstanceIds']
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribeInstancesTrafficPackages返回参数结构体
class DescribeInstancesTrafficPackagesResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 符合条件的实例流量包详情数量。
# @type TotalCount: Integer
# @param InstanceTrafficPackageSet: 实例流量包详情列表。
# @type InstanceTrafficPackageSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :InstanceTrafficPackageSet, :RequestId
def initialize(totalcount=nil, instancetrafficpackageset=nil, requestid=nil)
@TotalCount = totalcount
@InstanceTrafficPackageSet = instancetrafficpackageset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['InstanceTrafficPackageSet'].nil?
@InstanceTrafficPackageSet = []
params['InstanceTrafficPackageSet'].each do |i|
instancetrafficpackage_tmp = InstanceTrafficPackage.new
instancetrafficpackage_tmp.deserialize(i)
@InstanceTrafficPackageSet << instancetrafficpackage_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeKeyPairs请求参数结构体
class DescribeKeyPairsRequest < TencentCloud::Common::AbstractModel
# @param KeyIds: 密钥对 ID 列表。
# @type KeyIds: Array
# @param Offset: 偏移量，默认为 0。
# @type Offset: Integer
# @param Limit: 返回数量，默认为 20，最大值为 100。
# @type Limit: Integer
# @param Filters: 过滤器列表。
# key-id按照【密钥对ID】进行过滤。
# 类型：String
# 必选：否
# key-name按照【密钥对名称】进行过滤（支持模糊匹配）。
# 类型：String
# 必选：否
# 每次请求的 Filters 的上限为 10，Filter.Values 的上限为 5。参数不支持同时指定 KeyIds 和 Filters。
# @type Filters: Array
attr_accessor :KeyIds, :Offset, :Limit, :Filters
def initialize(keyids=nil, offset=nil, limit=nil, filters=nil)
@KeyIds = keyids
@Offset = offset
@Limit = limit
@Filters = filters
end
def deserialize(params)
@KeyIds = params['KeyIds']
@Offset = params['Offset']
@Limit = params['Limit']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
end
end
# DescribeKeyPairs返回参数结构体
class DescribeKeyPairsResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 符合条件的密钥对数量。
# @type TotalCount: Integer
# @param KeyPairSet: 密钥对详细信息列表。
# @type KeyPairSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :KeyPairSet, :RequestId
def initialize(totalcount=nil, keypairset=nil, requestid=nil)
@TotalCount = totalcount
@KeyPairSet = keypairset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['KeyPairSet'].nil?
@KeyPairSet = []
params['KeyPairSet'].each do |i|
keypair_tmp = KeyPair.new
keypair_tmp.deserialize(i)
@KeyPairSet << keypair_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeModifyInstanceBundles请求参数结构体
class DescribeModifyInstanceBundlesRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例 ID。
# @type InstanceId: String
# @param Filters: 过滤器列表。
# bundle-id按照【套餐 ID】进行过滤。
# 类型：String
# 必选：否
# support-platform-type按照【系统类型】进行过滤。
# 取值： LINUX_UNIX（Linux/Unix系统）；WINDOWS（Windows 系统）
# 类型：String
# 必选：否
# bundle-type按照 【套餐类型进行过滤】。
# 取值：GENERAL_BUNDLE (通用型套餐); STORAGE_BUNDLE(存储型套餐);ENTERPRISE_BUNDLE( 企业型套餐);EXCLUSIVE_BUNDLE(专属型套餐);BEFAST_BUNDLE(蜂驰型套餐);
# 类型：String
# 必选：否
# bundle-state按照【套餐状态】进行过滤。
# 取值: ‘ONLINE’(在线); ‘OFFLINE’(下线);
# 类型：String
# 必选：否
# 每次请求的 Filters 的上限为 10，Filter.Values 的上限为 5。
# @type Filters: Array
# @param Offset: 偏移量，默认为 0。关于`Offset`的更进一步介绍请参考 API [简介](https://cloud.tencent.com/document/product/1207/47578)中的相关小节。
# @type Offset: Integer
# @param Limit: 返回数量，默认为 20，最大值为 100。关于`Limit`的更进一步介绍请参考 API [简介](https://cloud.tencent.com/document/product/1207/47578)中的相关小节。
# @type Limit: Integer
attr_accessor :InstanceId, :Filters, :Offset, :Limit
def initialize(instanceid=nil, filters=nil, offset=nil, limit=nil)
@InstanceId = instanceid
@Filters = filters
@Offset = offset
@Limit = limit
end
def deserialize(params)
@InstanceId = params['InstanceId']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribeModifyInstanceBundles返回参数结构体
class DescribeModifyInstanceBundlesResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 符合条件的套餐数量。
# @type TotalCount: Integer
# @param ModifyBundleSet: 变更套餐详细信息。
# @type ModifyBundleSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :ModifyBundleSet, :RequestId
def initialize(totalcount=nil, modifybundleset=nil, requestid=nil)
@TotalCount = totalcount
@ModifyBundleSet = modifybundleset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['ModifyBundleSet'].nil?
@ModifyBundleSet = []
params['ModifyBundleSet'].each do |i|
modifybundle_tmp = ModifyBundle.new
modifybundle_tmp.deserialize(i)
@ModifyBundleSet << modifybundle_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeRegions请求参数结构体
class DescribeRegionsRequest < TencentCloud::Common::AbstractModel
def initialize()
end
def deserialize(params)
end
end
# DescribeRegions返回参数结构体
class DescribeRegionsResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 地域数量。
# @type TotalCount: Integer
# @param RegionSet: 地域信息列表。
# @type RegionSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :RegionSet, :RequestId
def initialize(totalcount=nil, regionset=nil, requestid=nil)
@TotalCount = totalcount
@RegionSet = regionset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['RegionSet'].nil?
@RegionSet = []
params['RegionSet'].each do |i|
regioninfo_tmp = RegionInfo.new
regioninfo_tmp.deserialize(i)
@RegionSet << regioninfo_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeResetInstanceBlueprints请求参数结构体
class DescribeResetInstanceBlueprintsRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param Offset: 偏移量，默认为 0。关于`Offset`的更进一步介绍请参考 API [简介](https://cloud.tencent.com/document/product/1207/47578)中的相关小节。
# @type Offset: Integer
# @param Limit: 返回数量，默认为 20，最大值为 100。关于`Limit`的更进一步介绍请参考 API [简介](https://cloud.tencent.com/document/product/1207/47578)中的相关小节。
# @type Limit: Integer
# @param Filters: 过滤器列表。
# blueprint-id按照【镜像 ID】进行过滤。
# 类型：String
# 必选：否
# blueprint-type按照【镜像类型】进行过滤。
# 取值： APP_OS（应用镜像 ）；PURE_OS（ 系统镜像）；PRIVATE（自定义镜像）。
# 类型：String
# 必选：否
# platform-type按照【镜像平台类型】进行过滤。
# 取值： LINUX_UNIX（Linux/Unix系统）；WINDOWS（Windows 系统）。
# 类型：String
# 必选：否
# blueprint-name按照【镜像名称】进行过滤。
# 类型：String
# 必选：否
# blueprint-state按照【镜像状态】进行过滤。
# 类型：String
# 必选：否
# 每次请求的 Filters 的上限为 10，Filter.Values 的上限为 5。参数不支持同时指定 BlueprintIds 和 Filters 。
# @type Filters: Array
attr_accessor :InstanceId, :Offset, :Limit, :Filters
def initialize(instanceid=nil, offset=nil, limit=nil, filters=nil)
@InstanceId = instanceid
@Offset = offset
@Limit = limit
@Filters = filters
end
def deserialize(params)
@InstanceId = params['InstanceId']
@Offset = params['Offset']
@Limit = params['Limit']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
end
end
# DescribeResetInstanceBlueprints返回参数结构体
class DescribeResetInstanceBlueprintsResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 符合条件的镜像数量。
# @type TotalCount: Integer
# @param ResetInstanceBlueprintSet: 镜像重置信息列表
# @type ResetInstanceBlueprintSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :ResetInstanceBlueprintSet, :RequestId
def initialize(totalcount=nil, resetinstanceblueprintset=nil, requestid=nil)
@TotalCount = totalcount
@ResetInstanceBlueprintSet = resetinstanceblueprintset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['ResetInstanceBlueprintSet'].nil?
@ResetInstanceBlueprintSet = []
params['ResetInstanceBlueprintSet'].each do |i|
resetinstanceblueprint_tmp = ResetInstanceBlueprint.new
resetinstanceblueprint_tmp.deserialize(i)
@ResetInstanceBlueprintSet << resetinstanceblueprint_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeScenes请求参数结构体
class DescribeScenesRequest < TencentCloud::Common::AbstractModel
# @param SceneIds: 使用场景ID列表。
# @type SceneIds: Array
# @param Offset: 偏移量，默认为 0。
# @type Offset: Integer
# @param Limit: 返回数量，默认为 20，最大值为 100。
# @type Limit: Integer
attr_accessor :SceneIds, :Offset, :Limit
def initialize(sceneids=nil, offset=nil, limit=nil)
@SceneIds = sceneids
@Offset = offset
@Limit = limit
end
def deserialize(params)
@SceneIds = params['SceneIds']
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribeScenes返回参数结构体
class DescribeScenesResponse < TencentCloud::Common::AbstractModel
# @param SceneSet: 使用场景列表。
# @type SceneSet: Array
# @param TotalCount: 使用场景总数量。
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :SceneSet, :TotalCount, :RequestId
def initialize(sceneset=nil, totalcount=nil, requestid=nil)
@SceneSet = sceneset
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['SceneSet'].nil?
@SceneSet = []
params['SceneSet'].each do |i|
scene_tmp = Scene.new
scene_tmp.deserialize(i)
@SceneSet << scene_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeSnapshotsDeniedActions请求参数结构体
class DescribeSnapshotsDeniedActionsRequest < TencentCloud::Common::AbstractModel
# @param SnapshotIds: 快照 ID 列表, 可通过 DescribeSnapshots 查询。
# @type SnapshotIds: Array
attr_accessor :SnapshotIds
def initialize(snapshotids=nil)
@SnapshotIds = snapshotids
end
def deserialize(params)
@SnapshotIds = params['SnapshotIds']
end
end
# DescribeSnapshotsDeniedActions返回参数结构体
class DescribeSnapshotsDeniedActionsResponse < TencentCloud::Common::AbstractModel
# @param SnapshotDeniedActionSet: 快照操作限制列表详细信息。
# @type SnapshotDeniedActionSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :SnapshotDeniedActionSet, :RequestId
def initialize(snapshotdeniedactionset=nil, requestid=nil)
@SnapshotDeniedActionSet = snapshotdeniedactionset
@RequestId = requestid
end
def deserialize(params)
unless params['SnapshotDeniedActionSet'].nil?
@SnapshotDeniedActionSet = []
params['SnapshotDeniedActionSet'].each do |i|
snapshotdeniedactions_tmp = SnapshotDeniedActions.new
snapshotdeniedactions_tmp.deserialize(i)
@SnapshotDeniedActionSet << snapshotdeniedactions_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeSnapshots请求参数结构体
class DescribeSnapshotsRequest < TencentCloud::Common::AbstractModel
# @param SnapshotIds: 要查询快照的 ID 列表。
# 参数不支持同时指定 SnapshotIds 和 Filters。
# @type SnapshotIds: Array
# @param Filters: 过滤器列表。
# snapshot-id按照【快照 ID】进行过滤。
# 类型：String
# 必选：否
# disk-id按照【磁盘 ID】进行过滤。
# 类型：String
# 必选：否
# snapshot-name按照【快照名称】进行过滤。
# 类型：String
# 必选：否
# instance-id按照【实例 ID 】进行过滤。
# 类型：String
# 必选：否
# 每次请求的 Filters 的上限为 10，Filter.Values 的上限为 5。参数不支持同时指定 SnapshotIds 和 Filters。
# @type Filters: Array
# @param Offset: 偏移量，默认为 0。
# @type Offset: Integer
# @param Limit: 返回数量，默认为 20，最大值为 100。
# @type Limit: Integer
attr_accessor :SnapshotIds, :Filters, :Offset, :Limit
def initialize(snapshotids=nil, filters=nil, offset=nil, limit=nil)
@SnapshotIds = snapshotids
@Filters = filters
@Offset = offset
@Limit = limit
end
def deserialize(params)
@SnapshotIds = params['SnapshotIds']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
filter_tmp = Filter.new
filter_tmp.deserialize(i)
@Filters << filter_tmp
end
end
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribeSnapshots返回参数结构体
class DescribeSnapshotsResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 快照的数量。
# @type TotalCount: Integer
# @param SnapshotSet: 快照的详情列表。
# @type SnapshotSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :SnapshotSet, :RequestId
def initialize(totalcount=nil, snapshotset=nil, requestid=nil)
@TotalCount = totalcount
@SnapshotSet = snapshotset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['SnapshotSet'].nil?
@SnapshotSet = []
params['SnapshotSet'].each do |i|
snapshot_tmp = Snapshot.new
snapshot_tmp.deserialize(i)
@SnapshotSet << snapshot_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeZones请求参数结构体
class DescribeZonesRequest < TencentCloud::Common::AbstractModel
# @param OrderField: 可用区列表排序的依据字段。取值范围：
# ZONE：依据可用区排序。
# INSTANCE_DISPLAY_LABEL：依据可用区展示标签排序，可用区展示标签包括：HIDDEN（隐藏）、NORMAL（普通）、SELECTED（默认选中），默认采用的升序排列为：['HIDDEN', 'NORMAL', 'SELECTED']。
# 默认按可用区排序。
# @type OrderField: String
# @param Order: 输出可用区列表的排列顺序。取值范围：
# ASC：升序排列。
# DESC：降序排列。
# 默认按升序排列。
# @type Order: String
attr_accessor :OrderField, :Order
def initialize(orderfield=nil, order=nil)
@OrderField = orderfield
@Order = order
end
def deserialize(params)
@OrderField = params['OrderField']
@Order = params['Order']
end
end
# DescribeZones返回参数结构体
class DescribeZonesResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 可用区数量
# @type TotalCount: Integer
# @param ZoneInfoSet: 可用区详细信息列表
# @type ZoneInfoSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :ZoneInfoSet, :RequestId
def initialize(totalcount=nil, zoneinfoset=nil, requestid=nil)
@TotalCount = totalcount
@ZoneInfoSet = zoneinfoset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['ZoneInfoSet'].nil?
@ZoneInfoSet = []
params['ZoneInfoSet'].each do |i|
zoneinfo_tmp = ZoneInfo.new
zoneinfo_tmp.deserialize(i)
@ZoneInfoSet << zoneinfo_tmp
end
end
@RequestId = params['RequestId']
end
end
# DetachCcn请求参数结构体
class DetachCcnRequest < TencentCloud::Common::AbstractModel
# @param CcnId: 云联网实例ID。
# @type CcnId: String
attr_accessor :CcnId
def initialize(ccnid=nil)
@CcnId = ccnid
end
def deserialize(params)
@CcnId = params['CcnId']
end
end
# DetachCcn返回参数结构体
class DetachCcnResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DetachDisks请求参数结构体
class DetachDisksRequest < TencentCloud::Common::AbstractModel
# @param DiskIds: 云硬盘ID列表。
# @type DiskIds: Array
attr_accessor :DiskIds
def initialize(diskids=nil)
@DiskIds = diskids
end
def deserialize(params)
@DiskIds = params['DiskIds']
end
end
# DetachDisks返回参数结构体
class DetachDisksResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# 计费项目明细。
class DetailPrice < TencentCloud::Common::AbstractModel
# @param PriceName: 描述计费项目名称，目前取值
# "DiskSpace"代表云硬盘空间收费项。
# "DiskBackupQuota"代表云硬盘备份点配额收费项。
# @type PriceName: String
# @param OriginUnitPrice: 云硬盘计费项维度单价。
# @type OriginUnitPrice: Float
# @param OriginalPrice: 云硬盘计费项维度总价。
# @type OriginalPrice: Float
# @param Discount: 云硬盘在计费项维度折扣。
# @type Discount: Float
# @param DiscountPrice: 云硬盘在计费项维度折后总价。
# @type DiscountPrice: Float
attr_accessor :PriceName, :OriginUnitPrice, :OriginalPrice, :Discount, :DiscountPrice
def initialize(pricename=nil, originunitprice=nil, originalprice=nil, discount=nil, discountprice=nil)
@PriceName = pricename
@OriginUnitPrice = originunitprice
@OriginalPrice = originalprice
@Discount = discount
@DiscountPrice = discountprice
end
def deserialize(params)
@PriceName = params['PriceName']
@OriginUnitPrice = params['OriginUnitPrice']
@OriginalPrice = params['OriginalPrice']
@Discount = params['Discount']
@DiscountPrice = params['DiscountPrice']
end
end
# DisassociateInstancesKeyPairs请求参数结构体
class DisassociateInstancesKeyPairsRequest < TencentCloud::Common::AbstractModel
# @param KeyIds: 密钥对 ID 列表。每次请求批量密钥对的上限为 100。
# @type KeyIds: Array
# @param InstanceIds: 实例 ID 列表。每次请求批量实例的上限为 100。可通过[DescribeInstances](https://cloud.tencent.com/document/api/1207/47573)接口返回值中的InstanceId获取。
# @type InstanceIds: Array
attr_accessor :KeyIds, :InstanceIds
def initialize(keyids=nil, instanceids=nil)
@KeyIds = keyids
@InstanceIds = instanceids
end
def deserialize(params)
@KeyIds = params['KeyIds']
@InstanceIds = params['InstanceIds']
end
end
# DisassociateInstancesKeyPairs返回参数结构体
class DisassociateInstancesKeyPairsResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# 套餐折扣详情（仅用于控制台调用询价相关接口返回）。
class DiscountDetail < TencentCloud::Common::AbstractModel
# @param TimeSpan: 计费时长。
# @type TimeSpan: Integer
# @param TimeUnit: 计费单元。
# @type TimeUnit: String
# @param TotalCost: 总价。
# @type TotalCost: Float
# @param RealTotalCost: 折后总价。
# @type RealTotalCost: Float
# @param Discount: 折扣。
# @type Discount: Integer
# @param PolicyDetail: 具体折扣详情。
# @type PolicyDetail: :class:`Tencentcloud::Lighthouse.v20200324.models.PolicyDetail`
attr_accessor :TimeSpan, :TimeUnit, :TotalCost, :RealTotalCost, :Discount, :PolicyDetail
def initialize(timespan=nil, timeunit=nil, totalcost=nil, realtotalcost=nil, discount=nil, policydetail=nil)
@TimeSpan = timespan
@TimeUnit = timeunit
@TotalCost = totalcost
@RealTotalCost = realtotalcost
@Discount = discount
@PolicyDetail = policydetail
end
def deserialize(params)
@TimeSpan = params['TimeSpan']
@TimeUnit = params['TimeUnit']
@TotalCost = params['TotalCost']
@RealTotalCost = params['RealTotalCost']
@Discount = params['Discount']
unless params['PolicyDetail'].nil?
@PolicyDetail = PolicyDetail.new
@PolicyDetail.deserialize(params['PolicyDetail'])
end
end
end
# 磁盘信息
class Disk < TencentCloud::Common::AbstractModel
# @param DiskId: 磁盘ID
# @type DiskId: String
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param Zone: 可用区
# @type Zone: String
# @param DiskName: 磁盘名称
# @type DiskName: String
# @param DiskUsage: 磁盘类型
# @type DiskUsage: String
# @param DiskType: 磁盘介质类型
# @type DiskType: String
# @param DiskChargeType: 磁盘付费类型
# @type DiskChargeType: String
# @param DiskSize: 磁盘大小
# @type DiskSize: Integer
# @param RenewFlag: 续费标识
# @type RenewFlag: String
# @param DiskState: 磁盘状态，取值范围：
# PENDING：创建中。
# UNATTACHED：未挂载。
# ATTACHING：挂载中。
# ATTACHED：已挂载。
# DETACHING：卸载中。
# SHUTDOWN：已隔离。
# CREATED_FAILED：创建失败。
# TERMINATING：销毁中。
# DELETING：删除中。
# FREEZING：冻结中。
# @type DiskState: String
# @param Attached: 磁盘挂载状态
# @type Attached: Boolean
# @param DeleteWithInstance: 是否随实例释放
# @type DeleteWithInstance: Boolean
# @param LatestOperation: 上一次操作
# @type LatestOperation: String
# @param LatestOperationState: 上一次操作状态
# @type LatestOperationState: String
# @param LatestOperationRequestId: 上一次请求ID
# @type LatestOperationRequestId: String
# @param CreatedTime: 创建时间。按照 ISO8601 标准表示，并且使用 UTC 时间。
# 格式为： YYYY-MM-DDThh:mm:ssZ。
# @type CreatedTime: String
# @param ExpiredTime: 到期时间。按照 ISO8601 标准表示，并且使用 UTC 时间。
# 格式为： YYYY-MM-DDThh:mm:ssZ。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ExpiredTime: String
# @param IsolatedTime: 隔离时间。按照 ISO8601 标准表示，并且使用 UTC 时间。
# 格式为： YYYY-MM-DDThh:mm:ssZ。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IsolatedTime: String
# @param DiskBackupCount: 云硬盘的已有备份点数量。
# @type DiskBackupCount: Integer
# @param DiskBackupQuota: 云硬盘的备份点配额数量。
# @type DiskBackupQuota: Integer
attr_accessor :DiskId, :InstanceId, :Zone, :DiskName, :DiskUsage, :DiskType, :DiskChargeType, :DiskSize, :RenewFlag, :DiskState, :Attached, :DeleteWithInstance, :LatestOperation, :LatestOperationState, :LatestOperationRequestId, :CreatedTime, :ExpiredTime, :IsolatedTime, :DiskBackupCount, :DiskBackupQuota
def initialize(diskid=nil, instanceid=nil, zone=nil, diskname=nil, diskusage=nil, disktype=nil, diskchargetype=nil, disksize=nil, renewflag=nil, diskstate=nil, attached=nil, deletewithinstance=nil, latestoperation=nil, latestoperationstate=nil, latestoperationrequestid=nil, createdtime=nil, expiredtime=nil, isolatedtime=nil, diskbackupcount=nil, diskbackupquota=nil)
@DiskId = diskid
@InstanceId = instanceid
@Zone = zone
@DiskName = diskname
@DiskUsage = diskusage
@DiskType = disktype
@DiskChargeType = diskchargetype
@DiskSize = disksize
@RenewFlag = renewflag
@DiskState = diskstate
@Attached = attached
@DeleteWithInstance = deletewithinstance
@LatestOperation = latestoperation
@LatestOperationState = latestoperationstate
@LatestOperationRequestId = latestoperationrequestid
@CreatedTime = createdtime
@ExpiredTime = expiredtime
@IsolatedTime = isolatedtime
@DiskBackupCount = diskbackupcount
@DiskBackupQuota = diskbackupquota
end
def deserialize(params)
@DiskId = params['DiskId']
@InstanceId = params['InstanceId']
@Zone = params['Zone']
@DiskName = params['DiskName']
@DiskUsage = params['DiskUsage']
@DiskType = params['DiskType']
@DiskChargeType = params['DiskChargeType']
@DiskSize = params['DiskSize']
@RenewFlag = params['RenewFlag']
@DiskState = params['DiskState']
@Attached = params['Attached']
@DeleteWithInstance = params['DeleteWithInstance']
@LatestOperation = params['LatestOperation']
@LatestOperationState = params['LatestOperationState']
@LatestOperationRequestId = params['LatestOperationRequestId']
@CreatedTime = params['CreatedTime']
@ExpiredTime = params['ExpiredTime']
@IsolatedTime = params['IsolatedTime']
@DiskBackupCount = params['DiskBackupCount']
@DiskBackupQuota = params['DiskBackupQuota']
end
end
# 描述了云硬盘备份点相关信息。
class DiskBackup < TencentCloud::Common::AbstractModel
# @param DiskBackupId: 云硬盘备份点ID。
# @type DiskBackupId: String
# @param DiskUsage: 创建此云硬盘备份点的云硬盘类型。取值：DATA_DISK：数据盘
# @type DiskUsage: String
# @param DiskId: 创建此云硬盘备份点的云硬盘 ID。
# @type DiskId: String
# @param DiskSize: 创建此云硬盘备份点的云硬盘大小，单位 GB。
# @type DiskSize: Integer
# @param DiskBackupName: 云硬盘备份点名称，用户自定义的云硬盘备份点别名。
# @type DiskBackupName: String
# @param DiskBackupState: 云硬盘备份点的状态。取值范围：
# NORMAL：正常。
# CREATING：创建中。
# ROLLBACKING：回滚中。
# DELETING：删除中。
# @type DiskBackupState: String
# @param Percent: 创建或回滚云硬盘备份点进度百分比，成功后此字段取值为 100。
# @type Percent: Integer
# @param LatestOperation: 上一次操作
# 注意：此字段可能返回 null，表示取不到有效值。
# @type LatestOperation: String
# @param LatestOperationState: 上一次操作状态
# 注意：此字段可能返回 null，表示取不到有效值。
# @type LatestOperationState: String
# @param LatestOperationRequestId: 上一次请求ID
# 注意：此字段可能返回 null，表示取不到有效值。
# @type LatestOperationRequestId: String
# @param CreatedTime: 创建时间。按照 ISO8601 标准表示，并且使用 UTC 时间。
# 格式为： YYYY-MM-DDThh:mm:ssZ。
# @type CreatedTime: String
attr_accessor :DiskBackupId, :DiskUsage, :DiskId, :DiskSize, :DiskBackupName, :DiskBackupState, :Percent, :LatestOperation, :LatestOperationState, :LatestOperationRequestId, :CreatedTime
def initialize(diskbackupid=nil, diskusage=nil, diskid=nil, disksize=nil, diskbackupname=nil, diskbackupstate=nil, percent=nil, latestoperation=nil, latestoperationstate=nil, latestoperationrequestid=nil, createdtime=nil)
@DiskBackupId = diskbackupid
@DiskUsage = diskusage
@DiskId = diskid
@DiskSize = disksize
@DiskBackupName = diskbackupname
@DiskBackupState = diskbackupstate
@Percent = percent
@LatestOperation = latestoperation
@LatestOperationState = latestoperationstate
@LatestOperationRequestId = latestoperationrequestid
@CreatedTime = createdtime
end
def deserialize(params)
@DiskBackupId = params['DiskBackupId']
@DiskUsage = params['DiskUsage']
@DiskId = params['DiskId']
@DiskSize = params['DiskSize']
@DiskBackupName = params['DiskBackupName']
@DiskBackupState = params['DiskBackupState']
@Percent = params['Percent']
@LatestOperation = params['LatestOperation']
@LatestOperationState = params['LatestOperationState']
@LatestOperationRequestId = params['LatestOperationRequestId']
@CreatedTime = params['CreatedTime']
end
end
# 云硬盘备份点操作限制列表。
class DiskBackupDeniedActions < TencentCloud::Common::AbstractModel
# @param DiskBackupId: 云硬盘备份点ID。
# @type DiskBackupId: String
# @param DeniedActions: 操作限制列表。
# @type DeniedActions: Array
attr_accessor :DiskBackupId, :DeniedActions
def initialize(diskbackupid=nil, deniedactions=nil)
@DiskBackupId = diskbackupid
@DeniedActions = deniedactions
end
def deserialize(params)
@DiskBackupId = params['DiskBackupId']
unless params['DeniedActions'].nil?
@DeniedActions = []
params['DeniedActions'].each do |i|
deniedaction_tmp = DeniedAction.new
deniedaction_tmp.deserialize(i)
@DeniedActions << deniedaction_tmp
end
end
end
end
# 云硬盘包年包月相关参数设置
class DiskChargePrepaid < TencentCloud::Common::AbstractModel
# @param Period: 新购周期。
# @type Period: Integer
# @param RenewFlag: 续费标识。
# @type RenewFlag: String
# @param TimeUnit: 新购单位. 默认值: "m"。
# @type TimeUnit: String
attr_accessor :Period, :RenewFlag, :TimeUnit
def initialize(period=nil, renewflag=nil, timeunit=nil)
@Period = period
@RenewFlag = renewflag
@TimeUnit = timeunit
end
def deserialize(params)
@Period = params['Period']
@RenewFlag = params['RenewFlag']
@TimeUnit = params['TimeUnit']
end
end
# 云硬盘配置
class DiskConfig < TencentCloud::Common::AbstractModel
# @param Zone: 可用区。
# @type Zone: String
# @param DiskType: 云硬盘类型。
# @type DiskType: String
# @param DiskSalesState: 云硬盘可售卖状态。
# @type DiskSalesState: String
# @param MaxDiskSize: 最大云硬盘大小。
# @type MaxDiskSize: Integer
# @param MinDiskSize: 最小云硬盘大小。
# @type MinDiskSize: Integer
# @param DiskStepSize: 云硬盘步长。
# @type DiskStepSize: Integer
attr_accessor :Zone, :DiskType, :DiskSalesState, :MaxDiskSize, :MinDiskSize, :DiskStepSize
def initialize(zone=nil, disktype=nil, disksalesstate=nil, maxdisksize=nil, mindisksize=nil, diskstepsize=nil)
@Zone = zone
@DiskType = disktype
@DiskSalesState = disksalesstate
@MaxDiskSize = maxdisksize
@MinDiskSize = mindisksize
@DiskStepSize = diskstepsize
end
def deserialize(params)
@Zone = params['Zone']
@DiskType = params['DiskType']
@DiskSalesState = params['DiskSalesState']
@MaxDiskSize = params['MaxDiskSize']
@MinDiskSize = params['MinDiskSize']
@DiskStepSize = params['DiskStepSize']
end
end
# 磁盘操作限制列表详细信息
class DiskDeniedActions < TencentCloud::Common::AbstractModel
# @param DiskId: 云硬盘ID。
# @type DiskId: String
# @param DeniedActions: 操作限制列表。
# @type DeniedActions: Array
attr_accessor :DiskId, :DeniedActions
def initialize(diskid=nil, deniedactions=nil)
@DiskId = diskid
@DeniedActions = deniedactions
end
def deserialize(params)
@DiskId = params['DiskId']
unless params['DeniedActions'].nil?
@DeniedActions = []
params['DeniedActions'].each do |i|
deniedaction_tmp = DeniedAction.new
deniedaction_tmp.deserialize(i)
@DeniedActions << deniedaction_tmp
end
end
end
end
# 云硬盘价格
class DiskPrice < TencentCloud::Common::AbstractModel
# @param OriginalDiskPrice: 云硬盘单价。
# @type OriginalDiskPrice: Float
# @param OriginalPrice: 云硬盘总价。
# @type OriginalPrice: Float
# @param Discount: 折扣。
# @type Discount: Float
# @param DiscountPrice: 折后总价。
# @type DiscountPrice: Float
# @param DetailPrices: 计费项目明细列表。
# @type DetailPrices: Array
attr_accessor :OriginalDiskPrice, :OriginalPrice, :Discount, :DiscountPrice, :DetailPrices
def initialize(originaldiskprice=nil, originalprice=nil, discount=nil, discountprice=nil, detailprices=nil)
@OriginalDiskPrice = originaldiskprice
@OriginalPrice = originalprice
@Discount = discount
@DiscountPrice = discountprice
@DetailPrices = detailprices
end
def deserialize(params)
@OriginalDiskPrice = params['OriginalDiskPrice']
@OriginalPrice = params['OriginalPrice']
@Discount = params['Discount']
@DiscountPrice = params['DiscountPrice']
unless params['DetailPrices'].nil?
@DetailPrices = []
params['DetailPrices'].each do |i|
detailprice_tmp = DetailPrice.new
detailprice_tmp.deserialize(i)
@DetailPrices << detailprice_tmp
end
end
end
end
# 可退还云硬盘详细信息
class DiskReturnable < TencentCloud::Common::AbstractModel
# @param DiskId: 云硬盘ID。
# @type DiskId: String
# @param IsReturnable: 云硬盘是否可退还。
# @type IsReturnable: Boolean
# @param ReturnFailCode: 云硬盘退还失败错误码。
# @type ReturnFailCode: Integer
# @param ReturnFailMessage: 云硬盘退还失败错误信息。
# @type ReturnFailMessage: String
attr_accessor :DiskId, :IsReturnable, :ReturnFailCode, :ReturnFailMessage
def initialize(diskid=nil, isreturnable=nil, returnfailcode=nil, returnfailmessage=nil)
@DiskId = diskid
@IsReturnable = isreturnable
@ReturnFailCode = returnfailcode
@ReturnFailMessage = returnfailmessage
end
def deserialize(params)
@DiskId = params['DiskId']
@IsReturnable = params['IsReturnable']
@ReturnFailCode = params['ReturnFailCode']
@ReturnFailMessage = params['ReturnFailMessage']
end
end
# Docker容器创建时的配置
class DockerContainerConfiguration < TencentCloud::Common::AbstractModel
# @param ContainerImage: 容器镜像地址
# @type ContainerImage: String
# @param ContainerName: 容器名称
# @type ContainerName: String
# @param Envs: 环境变量列表
# @type Envs: Array
# @param PublishPorts: 容器端口主机端口映射列表
# @type PublishPorts: Array
# @param Volumes: 容器加载本地卷列表
# @type Volumes: Array
# @param Command: 运行的命令
# @type Command: String
attr_accessor :ContainerImage, :ContainerName, :Envs, :PublishPorts, :Volumes, :Command
def initialize(containerimage=nil, containername=nil, envs=nil, publishports=nil, volumes=nil, command=nil)
@ContainerImage = containerimage
@ContainerName = containername
@Envs = envs
@PublishPorts = publishports
@Volumes = volumes
@Command = command
end
def deserialize(params)
@ContainerImage = params['ContainerImage']
@ContainerName = params['ContainerName']
unless params['Envs'].nil?
@Envs = []
params['Envs'].each do |i|
containerenv_tmp = ContainerEnv.new
containerenv_tmp.deserialize(i)
@Envs << containerenv_tmp
end
end
unless params['PublishPorts'].nil?
@PublishPorts = []
params['PublishPorts'].each do |i|
dockercontainerpublishport_tmp = DockerContainerPublishPort.new
dockercontainerpublishport_tmp.deserialize(i)
@PublishPorts << dockercontainerpublishport_tmp
end
end
unless params['Volumes'].nil?
@Volumes = []
params['Volumes'].each do |i|
dockercontainervolume_tmp = DockerContainerVolume.new
dockercontainervolume_tmp.deserialize(i)
@Volumes << dockercontainervolume_tmp
end
end
@Command = params['Command']
end
end
# Docker容器映射的端口
class DockerContainerPublishPort < TencentCloud::Common::AbstractModel
# @param HostPort: 主机端口
# @type HostPort: Integer
# @param ContainerPort: 容器端口
# @type ContainerPort: Integer
# @param Ip: 对外绑定IP，默认0.0.0.0
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Ip: String
# @param Protocol: 协议，默认tcp，支持tcp/udp/sctp
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Protocol: String
attr_accessor :HostPort, :ContainerPort, :Ip, :Protocol
def initialize(hostport=nil, containerport=nil, ip=nil, protocol=nil)
@HostPort = hostport
@ContainerPort = containerport
@Ip = ip
@Protocol = protocol
end
def deserialize(params)
@HostPort = params['HostPort']
@ContainerPort = params['ContainerPort']
@Ip = params['Ip']
@Protocol = params['Protocol']
end
end
# Docker容器挂载卷
class DockerContainerVolume < TencentCloud::Common::AbstractModel
# @param ContainerPath: 容器路径
# @type ContainerPath: String
# @param HostPath: 主机路径
# @type HostPath: String
attr_accessor :ContainerPath, :HostPath
def initialize(containerpath=nil, hostpath=nil)
@ContainerPath = containerpath
@HostPath = hostpath
end
def deserialize(params)
@ContainerPath = params['ContainerPath']
@HostPath = params['HostPath']
end
end
# >描述键值对过滤器，用于条件过滤查询。例如过滤名称等
# > * 若存在多个`Filter`时，`Filter`间的关系为逻辑与（`AND`）关系。
# > * 若同一个`Filter`存在多个`Values`，同一`Filter`下`Values`间的关系为逻辑或（`OR`）关系。
# >
# > 以DescribeInstances接口的`Filter`为例。若我们需要查询实例名称（`instance-name`）为test ***并且*** 实例内网IP（`private-ip-address`）为10.10.10.10的实例时，可如下实现：
# ```
# Filters.0.Name=instance-name
# &Filters.0.Values.0=test
# &Filters.1.Name=private-ip-address
# &Filters.1.Values.0=10.10.10.10
# ```
class Filter < TencentCloud::Common::AbstractModel
# @param Name: 需要过滤的字段。
# @type Name: String
# @param Values: 字段的过滤值。
# @type Values: Array
attr_accessor :Name, :Values
def initialize(name=nil, values=nil)
@Name = name
@Values = values
end
def deserialize(params)
@Name = params['Name']
@Values = params['Values']
end
end
# 描述防火墙规则信息。
class FirewallRule < TencentCloud::Common::AbstractModel
# @param Protocol: 协议，取值：TCP，UDP，ICMP，ALL。
# @type Protocol: String
# @param Port: 端口，取值：ALL，单独的端口，逗号分隔的离散端口，减号分隔的端口范围。
# @type Port: String
# @param CidrBlock: 网段或 IP (互斥)。默认为 0.0.0.0/0，表示所有来源。
# @type CidrBlock: String
# @param Action: 取值：ACCEPT，DROP。默认为 ACCEPT。
# @type Action: String
# @param FirewallRuleDescription: 防火墙规则描述。
# @type FirewallRuleDescription: String
attr_accessor :Protocol, :Port, :CidrBlock, :Action, :FirewallRuleDescription
def initialize(protocol=nil, port=nil, cidrblock=nil, action=nil, firewallruledescription=nil)
@Protocol = protocol
@Port = port
@CidrBlock = cidrblock
@Action = action
@FirewallRuleDescription = firewallruledescription
end
def deserialize(params)
@Protocol = params['Protocol']
@Port = params['Port']
@CidrBlock = params['CidrBlock']
@Action = params['Action']
@FirewallRuleDescription = params['FirewallRuleDescription']
end
end
# 描述防火墙规则详细信息。
class FirewallRuleInfo < TencentCloud::Common::AbstractModel
# @param AppType: 应用类型，取值：自定义，HTTP(80)，HTTPS(443)，Linux登录(22)，Windows登录(3389)，MySQL(3306)，SQL Server(1433)，全部TCP，全部UDP，Ping-ICMP，ALL。
# @type AppType: String
# @param Protocol: 协议，取值：TCP，UDP，ICMP，ALL。
# @type Protocol: String
# @param Port: 端口，取值：ALL，单独的端口，逗号分隔的离散端口，减号分隔的端口范围。
# @type Port: String
# @param CidrBlock: 网段或 IP (互斥)。默认为 0.0.0.0/0，表示所有来源。
# @type CidrBlock: String
# @param Action: 取值：ACCEPT，DROP。默认为 ACCEPT。
# @type Action: String
# @param FirewallRuleDescription: 防火墙规则描述。
# @type FirewallRuleDescription: String
attr_accessor :AppType, :Protocol, :Port, :CidrBlock, :Action, :FirewallRuleDescription
def initialize(apptype=nil, protocol=nil, port=nil, cidrblock=nil, action=nil, firewallruledescription=nil)
@AppType = apptype
@Protocol = protocol
@Port = port
@CidrBlock = cidrblock
@Action = action
@FirewallRuleDescription = firewallruledescription
end
def deserialize(params)
@AppType = params['AppType']
@Protocol = params['Protocol']
@Port = params['Port']
@CidrBlock = params['CidrBlock']
@Action = params['Action']
@FirewallRuleDescription = params['FirewallRuleDescription']
end
end
# 描述通用资源配额信息。
class GeneralResourceQuota < TencentCloud::Common::AbstractModel
# @param ResourceName: 资源名称。
# @type ResourceName: String
# @param ResourceQuotaAvailable: 资源当前可用数量。
# @type ResourceQuotaAvailable: Integer
# @param ResourceQuotaTotal: 资源总数量。
# @type ResourceQuotaTotal: Integer
attr_accessor :ResourceName, :ResourceQuotaAvailable, :ResourceQuotaTotal
def initialize(resourcename=nil, resourcequotaavailable=nil, resourcequotatotal=nil)
@ResourceName = resourcename
@ResourceQuotaAvailable = resourcequotaavailable
@ResourceQuotaTotal = resourcequotatotal
end
def deserialize(params)
@ResourceName = params['ResourceName']
@ResourceQuotaAvailable = params['ResourceQuotaAvailable']
@ResourceQuotaTotal = params['ResourceQuotaTotal']
end
end
# ImportKeyPair请求参数结构体
class ImportKeyPairRequest < TencentCloud::Common::AbstractModel
# @param KeyName: 密钥对名称，可由数字，字母和下划线组成，长度不超过 25 个字符。
# @type KeyName: String
# @param PublicKey: 密钥对的公钥内容， OpenSSH RSA 格式。
# @type PublicKey: String
attr_accessor :KeyName, :PublicKey
def initialize(keyname=nil, publickey=nil)
@KeyName = keyname
@PublicKey = publickey
end
def deserialize(params)
@KeyName = params['KeyName']
@PublicKey = params['PublicKey']
end
end
# ImportKeyPair返回参数结构体
class ImportKeyPairResponse < TencentCloud::Common::AbstractModel
# @param KeyId: 密钥对 ID。
# @type KeyId: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :KeyId, :RequestId
def initialize(keyid=nil, requestid=nil)
@KeyId = keyid
@RequestId = requestid
end
def deserialize(params)
@KeyId = params['KeyId']
@RequestId = params['RequestId']
end
end
# InquirePriceCreateBlueprint请求参数结构体
class InquirePriceCreateBlueprintRequest < TencentCloud::Common::AbstractModel
# @param BlueprintCount: 自定义镜像的个数。默认值为1。
# @type BlueprintCount: Integer
attr_accessor :BlueprintCount
def initialize(blueprintcount=nil)
@BlueprintCount = blueprintcount
end
def deserialize(params)
@BlueprintCount = params['BlueprintCount']
end
end
# InquirePriceCreateBlueprint返回参数结构体
class InquirePriceCreateBlueprintResponse < TencentCloud::Common::AbstractModel
# @param BlueprintPrice: 自定义镜像的价格参数。
# @type BlueprintPrice: :class:`Tencentcloud::Lighthouse.v20200324.models.BlueprintPrice`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :BlueprintPrice, :RequestId
def initialize(blueprintprice=nil, requestid=nil)
@BlueprintPrice = blueprintprice
@RequestId = requestid
end
def deserialize(params)
unless params['BlueprintPrice'].nil?
@BlueprintPrice = BlueprintPrice.new
@BlueprintPrice.deserialize(params['BlueprintPrice'])
end
@RequestId = params['RequestId']
end
end
# InquirePriceCreateDisks请求参数结构体
class InquirePriceCreateDisksRequest < TencentCloud::Common::AbstractModel
# @param DiskSize: 云硬盘大小, 单位: GB。
# @type DiskSize: Integer
# @param DiskType: 云硬盘介质类型。取值: "CLOUD_PREMIUM"(高性能云盘), "CLOUD_SSD"(SSD云硬盘)。
# @type DiskType: String
# @param DiskChargePrepaid: 新购云硬盘包年包月相关参数设置。
# @type DiskChargePrepaid: :class:`Tencentcloud::Lighthouse.v20200324.models.DiskChargePrepaid`
# @param DiskCount: 云硬盘个数, 默认值: 1。
# @type DiskCount: Integer
# @param DiskBackupQuota: 指定云硬盘备份点配额，不传时默认为不带备份点配额。目前只支持不带或设置1个云硬盘备份点配额。
# @type DiskBackupQuota: Integer
attr_accessor :DiskSize, :DiskType, :DiskChargePrepaid, :DiskCount, :DiskBackupQuota
def initialize(disksize=nil, disktype=nil, diskchargeprepaid=nil, diskcount=nil, diskbackupquota=nil)
@DiskSize = disksize
@DiskType = disktype
@DiskChargePrepaid = diskchargeprepaid
@DiskCount = diskcount
@DiskBackupQuota = diskbackupquota
end
def deserialize(params)
@DiskSize = params['DiskSize']
@DiskType = params['DiskType']
unless params['DiskChargePrepaid'].nil?
@DiskChargePrepaid = DiskChargePrepaid.new
@DiskChargePrepaid.deserialize(params['DiskChargePrepaid'])
end
@DiskCount = params['DiskCount']
@DiskBackupQuota = params['DiskBackupQuota']
end
end
# InquirePriceCreateDisks返回参数结构体
class InquirePriceCreateDisksResponse < TencentCloud::Common::AbstractModel
# @param DiskPrice: 云硬盘价格。
# @type DiskPrice: :class:`Tencentcloud::Lighthouse.v20200324.models.DiskPrice`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :DiskPrice, :RequestId
def initialize(diskprice=nil, requestid=nil)
@DiskPrice = diskprice
@RequestId = requestid
end
def deserialize(params)
unless params['DiskPrice'].nil?
@DiskPrice = DiskPrice.new
@DiskPrice.deserialize(params['DiskPrice'])
end
@RequestId = params['RequestId']
end
end
# InquirePriceCreateInstances请求参数结构体
class InquirePriceCreateInstancesRequest < TencentCloud::Common::AbstractModel
# @param BundleId: 实例的套餐 ID。
# @type BundleId: String
# @param InstanceCount: 创建数量，默认为 1。
# @type InstanceCount: Integer
# @param InstanceChargePrepaid: 预付费模式，即包年包月相关参数设置。通过该参数可以指定包年包月实例的购买时长、是否设置自动续费等属性。若指定实例的付费模式为预付费则该参数必传。
# @type InstanceChargePrepaid: :class:`Tencentcloud::Lighthouse.v20200324.models.InstanceChargePrepaid`
# @param BlueprintId: 应用镜像 ID，使用收费应用镜像时必填。可通过[DescribeBlueprints](https://cloud.tencent.com/document/product/1207/47689)接口返回值中的BlueprintId获取。
# @type BlueprintId: String
attr_accessor :BundleId, :InstanceCount, :InstanceChargePrepaid, :BlueprintId
def initialize(bundleid=nil, instancecount=nil, instancechargeprepaid=nil, blueprintid=nil)
@BundleId = bundleid
@InstanceCount = instancecount
@InstanceChargePrepaid = instancechargeprepaid
@BlueprintId = blueprintid
end
def deserialize(params)
@BundleId = params['BundleId']
@InstanceCount = params['InstanceCount']
unless params['InstanceChargePrepaid'].nil?
@InstanceChargePrepaid = InstanceChargePrepaid.new
@InstanceChargePrepaid.deserialize(params['InstanceChargePrepaid'])
end
@BlueprintId = params['BlueprintId']
end
end
# InquirePriceCreateInstances返回参数结构体
class InquirePriceCreateInstancesResponse < TencentCloud::Common::AbstractModel
# @param Price: 询价信息。
# @type Price: :class:`Tencentcloud::Lighthouse.v20200324.models.Price`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Price, :RequestId
def initialize(price=nil, requestid=nil)
@Price = price
@RequestId = requestid
end
def deserialize(params)
unless params['Price'].nil?
@Price = Price.new
@Price.deserialize(params['Price'])
end
@RequestId = params['RequestId']
end
end
# InquirePriceRenewDisks请求参数结构体
class InquirePriceRenewDisksRequest < TencentCloud::Common::AbstractModel
# @param DiskIds: 云硬盘ID列表。
# @type DiskIds: Array
# @param RenewDiskChargePrepaid: 续费云硬盘包年包月相关参数设置。
# @type RenewDiskChargePrepaid: :class:`Tencentcloud::Lighthouse.v20200324.models.RenewDiskChargePrepaid`
attr_accessor :DiskIds, :RenewDiskChargePrepaid
def initialize(diskids=nil, renewdiskchargeprepaid=nil)
@DiskIds = diskids
@RenewDiskChargePrepaid = renewdiskchargeprepaid
end
def deserialize(params)
@DiskIds = params['DiskIds']
unless params['RenewDiskChargePrepaid'].nil?
@RenewDiskChargePrepaid = RenewDiskChargePrepaid.new
@RenewDiskChargePrepaid.deserialize(params['RenewDiskChargePrepaid'])
end
end
end
# InquirePriceRenewDisks返回参数结构体
class InquirePriceRenewDisksResponse < TencentCloud::Common::AbstractModel
# @param DiskPrice: 云硬盘价格。
# @type DiskPrice: :class:`Tencentcloud::Lighthouse.v20200324.models.DiskPrice`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :DiskPrice, :RequestId
def initialize(diskprice=nil, requestid=nil)
@DiskPrice = diskprice
@RequestId = requestid
end
def deserialize(params)
unless params['DiskPrice'].nil?
@DiskPrice = DiskPrice.new
@DiskPrice.deserialize(params['DiskPrice'])
end
@RequestId = params['RequestId']
end
end
# InquirePriceRenewInstances请求参数结构体
class InquirePriceRenewInstancesRequest < TencentCloud::Common::AbstractModel
# @param InstanceIds: 待续费的实例ID。可通过[DescribeInstances](https://cloud.tencent.com/document/api/1207/47573 )接口返回值中的InstanceId获取。每次请求批量实例的上限为50。
# @type InstanceIds: Array
# @param InstanceChargePrepaid: 预付费模式，即包年包月相关参数设置。通过该参数可以指定包年包月实例的购买时长、是否设置自动续费等属性。若指定实例的付费模式为预付费则该参数必传。
# @type InstanceChargePrepaid: :class:`Tencentcloud::Lighthouse.v20200324.models.InstanceChargePrepaid`
# @param RenewDataDisk: 是否续费数据盘。默认值: false, 即不续费。
# @type RenewDataDisk: Boolean
# @param AlignInstanceExpiredTime: 数据盘是否对齐实例到期时间。默认值: false, 即不对齐。
# @type AlignInstanceExpiredTime: Boolean
attr_accessor :InstanceIds, :InstanceChargePrepaid, :RenewDataDisk, :AlignInstanceExpiredTime
def initialize(instanceids=nil, instancechargeprepaid=nil, renewdatadisk=nil, aligninstanceexpiredtime=nil)
@InstanceIds = instanceids
@InstanceChargePrepaid = instancechargeprepaid
@RenewDataDisk = renewdatadisk
@AlignInstanceExpiredTime = aligninstanceexpiredtime
end
def deserialize(params)
@InstanceIds = params['InstanceIds']
unless params['InstanceChargePrepaid'].nil?
@InstanceChargePrepaid = InstanceChargePrepaid.new
@InstanceChargePrepaid.deserialize(params['InstanceChargePrepaid'])
end
@RenewDataDisk = params['RenewDataDisk']
@AlignInstanceExpiredTime = params['AlignInstanceExpiredTime']
end
end
# InquirePriceRenewInstances返回参数结构体
class InquirePriceRenewInstancesResponse < TencentCloud::Common::AbstractModel
# @param Price: 询价信息。默认为列表中第一个实例的价格信息。
# @type Price: :class:`Tencentcloud::Lighthouse.v20200324.models.Price`
# @param DataDiskPriceSet: 数据盘价格信息列表。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DataDiskPriceSet: Array
# @param InstancePriceDetailSet: 待续费实例价格列表。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type InstancePriceDetailSet: Array
# @param TotalPrice: 总计价格。
# @type TotalPrice: :class:`Tencentcloud::Lighthouse.v20200324.models.TotalPrice`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Price, :DataDiskPriceSet, :InstancePriceDetailSet, :TotalPrice, :RequestId
def initialize(price=nil, datadiskpriceset=nil, instancepricedetailset=nil, totalprice=nil, requestid=nil)
@Price = price
@DataDiskPriceSet = datadiskpriceset
@InstancePriceDetailSet = instancepricedetailset
@TotalPrice = totalprice
@RequestId = requestid
end
def deserialize(params)
unless params['Price'].nil?
@Price = Price.new
@Price.deserialize(params['Price'])
end
unless params['DataDiskPriceSet'].nil?
@DataDiskPriceSet = []
params['DataDiskPriceSet'].each do |i|
datadiskprice_tmp = DataDiskPrice.new
datadiskprice_tmp.deserialize(i)
@DataDiskPriceSet << datadiskprice_tmp
end
end
unless params['InstancePriceDetailSet'].nil?
@InstancePriceDetailSet = []
params['InstancePriceDetailSet'].each do |i|
instancepricedetail_tmp = InstancePriceDetail.new
instancepricedetail_tmp.deserialize(i)
@InstancePriceDetailSet << instancepricedetail_tmp
end
end
unless params['TotalPrice'].nil?
@TotalPrice = TotalPrice.new
@TotalPrice.deserialize(params['TotalPrice'])
end
@RequestId = params['RequestId']
end
end
# 描述了实例信息。
class Instance < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例 ID。
# @type InstanceId: String
# @param BundleId: 套餐 ID。
# @type BundleId: String
# @param BlueprintId: 镜像 ID。
# @type BlueprintId: String
# @param CPU: 实例的 CPU 核数，单位：核。
# @type CPU: Integer
# @param Memory: 实例内存容量，单位：GB 。
# @type Memory: Integer
# @param InstanceName: 实例名称。
# @type InstanceName: String
# @param InstanceChargeType: 实例计费模式。取值范围：
# PREPAID：表示预付费，即包年包月。
# @type InstanceChargeType: String
# @param SystemDisk: 实例系统盘信息。
# @type SystemDisk: :class:`Tencentcloud::Lighthouse.v20200324.models.SystemDisk`
# @param PrivateAddresses: 实例主网卡的内网 IP。
# 注意：此字段可能返回 空，表示取不到有效值。
# @type PrivateAddresses: Array
# @param PublicAddresses: 实例主网卡的公网 IP。
# 注意：此字段可能返回 空，表示取不到有效值。
# @type PublicAddresses: Array
# @param InternetAccessible: 实例带宽信息。
# @type InternetAccessible: :class:`Tencentcloud::Lighthouse.v20200324.models.InternetAccessible`
# @param RenewFlag: 自动续费标识。取值范围：
# NOTIFY_AND_MANUAL_RENEW：表示通知即将过期，但不自动续费
# NOTIFY_AND_AUTO_RENEW：表示通知即将过期，而且自动续费 。
# @type RenewFlag: String
# @param LoginSettings: 实例登录设置。
# @type LoginSettings: :class:`Tencentcloud::Lighthouse.v20200324.models.LoginSettings`
# @param InstanceState: 实例状态。取值范围：
# PENDING：表示创建中LAUNCH_FAILED：表示创建失败RUNNING：表示运行中STOPPED：表示关机STARTING：表示开机中STOPPING：表示关机中REBOOTING：表示重启中SHUTDOWN：表示停止待销毁TERMINATING：表示销毁中DELETING：表示删除中FREEZING：表示冻结中ENTER_RESCUE_MODE：表示进入救援模式中RESCUE_MODE：表示救援模式EXIT_RESCUE_MODE：表示退出救援模式中
# @type InstanceState: String
# @param Uuid: 实例全局唯一 ID。
# @type Uuid: String
# @param LatestOperation: 实例的最新操作。例：StopInstances、ResetInstance。注意：此字段可能返回 空值，表示取不到有效值。
# @type LatestOperation: String
# @param LatestOperationState: 实例的最新操作状态。取值范围：
# SUCCESS：表示操作成功
# OPERATING：表示操作执行中
# FAILED：表示操作失败
# 注意：此字段可能返回 空值，表示取不到有效值。
# @type LatestOperationState: String
# @param LatestOperationRequestId: 实例最新操作的唯一请求 ID。
# 注意：此字段可能返回 空值，表示取不到有效值。
# @type LatestOperationRequestId: String
# @param IsolatedTime: 隔离时间。按照 ISO8601 标准表示，并且使用 UTC 时间。
# 格式为： YYYY-MM-DDThh:mm:ssZ。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IsolatedTime: String
# @param CreatedTime: 创建时间。按照 ISO8601 标准表示，并且使用 UTC 时间。
# 格式为： YYYY-MM-DDThh:mm:ssZ。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CreatedTime: String
# @param ExpiredTime: 到期时间。按照 ISO8601 标准表示，并且使用 UTC 时间。
# 格式为： YYYY-MM-DDThh:mm:ssZ 。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ExpiredTime: String
# @param PlatformType: 操作系统平台类型，如 LINUX_UNIX、WINDOWS。
# @type PlatformType: String
# @param Platform: 操作系统平台。
# @type Platform: String
# @param OsName: 操作系统名称。
# @type OsName: String
# @param Zone: 可用区。
# @type Zone: String
# @param Tags: 实例绑定的标签列表。
# @type Tags: Array
# @param InstanceRestrictState: 实例封禁状态。取值范围：
# NORMAL实例正常。NETWORK_RESTRICT：网络封禁。
# @type InstanceRestrictState: String
attr_accessor :InstanceId, :BundleId, :BlueprintId, :CPU, :Memory, :InstanceName, :InstanceChargeType, :SystemDisk, :PrivateAddresses, :PublicAddresses, :InternetAccessible, :RenewFlag, :LoginSettings, :InstanceState, :Uuid, :LatestOperation, :LatestOperationState, :LatestOperationRequestId, :IsolatedTime, :CreatedTime, :ExpiredTime, :PlatformType, :Platform, :OsName, :Zone, :Tags, :InstanceRestrictState
def initialize(instanceid=nil, bundleid=nil, blueprintid=nil, cpu=nil, memory=nil, instancename=nil, instancechargetype=nil, systemdisk=nil, privateaddresses=nil, publicaddresses=nil, internetaccessible=nil, renewflag=nil, loginsettings=nil, instancestate=nil, uuid=nil, latestoperation=nil, latestoperationstate=nil, latestoperationrequestid=nil, isolatedtime=nil, createdtime=nil, expiredtime=nil, platformtype=nil, platform=nil, osname=nil, zone=nil, tags=nil, instancerestrictstate=nil)
@InstanceId = instanceid
@BundleId = bundleid
@BlueprintId = blueprintid
@CPU = cpu
@Memory = memory
@InstanceName = instancename
@InstanceChargeType = instancechargetype
@SystemDisk = systemdisk
@PrivateAddresses = privateaddresses
@PublicAddresses = publicaddresses
@InternetAccessible = internetaccessible
@RenewFlag = renewflag
@LoginSettings = loginsettings
@InstanceState = instancestate
@Uuid = uuid
@LatestOperation = latestoperation
@LatestOperationState = latestoperationstate
@LatestOperationRequestId = latestoperationrequestid
@IsolatedTime = isolatedtime
@CreatedTime = createdtime
@ExpiredTime = expiredtime
@PlatformType = platformtype
@Platform = platform
@OsName = osname
@Zone = zone
@Tags = tags
@InstanceRestrictState = instancerestrictstate
end
def deserialize(params)
@InstanceId = params['InstanceId']
@BundleId = params['BundleId']
@BlueprintId = params['BlueprintId']
@CPU = params['CPU']
@Memory = params['Memory']
@InstanceName = params['InstanceName']
@InstanceChargeType = params['InstanceChargeType']
unless params['SystemDisk'].nil?
@SystemDisk = SystemDisk.new
@SystemDisk.deserialize(params['SystemDisk'])
end
@PrivateAddresses = params['PrivateAddresses']
@PublicAddresses = params['PublicAddresses']
unless params['InternetAccessible'].nil?
@InternetAccessible = InternetAccessible.new
@InternetAccessible.deserialize(params['InternetAccessible'])
end
@RenewFlag = params['RenewFlag']
unless params['LoginSettings'].nil?
@LoginSettings = LoginSettings.new
@LoginSettings.deserialize(params['LoginSettings'])
end
@InstanceState = params['InstanceState']
@Uuid = params['Uuid']
@LatestOperation = params['LatestOperation']
@LatestOperationState = params['LatestOperationState']
@LatestOperationRequestId = params['LatestOperationRequestId']
@IsolatedTime = params['IsolatedTime']
@CreatedTime = params['CreatedTime']
@ExpiredTime = params['ExpiredTime']
@PlatformType = params['PlatformType']
@Platform = params['Platform']
@OsName = params['OsName']
@Zone = params['Zone']
unless params['Tags'].nil?
@Tags = []
params['Tags'].each do |i|
tag_tmp = Tag.new
tag_tmp.deserialize(i)
@Tags << tag_tmp
end
end
@InstanceRestrictState = params['InstanceRestrictState']
end
end
# 描述了实例的计费模式
class InstanceChargePrepaid < TencentCloud::Common::AbstractModel
# @param Period: 购买实例的时长，单位：月。取值范围：1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 24, 36, 48, 60。
# @type Period: Integer
# @param RenewFlag: 自动续费标识。取值范围：
NOTIFY_AND_AUTO_RENEW：通知过期且自动续费
NOTIFY_AND_MANUAL_RENEW：通知过期不自动续费，用户需要手动续费
DISABLE_NOTIFY_AND_AUTO_RENEW：不自动续费，且不通知
默认取值：NOTIFY_AND_MANUAL_RENEW。若该参数指定为NOTIFY_AND_AUTO_RENEW，在账户余额充足的情况下，实例到期后将按月自动续费。
# @type RenewFlag: String
attr_accessor :Period, :RenewFlag
def initialize(period=nil, renewflag=nil)
@Period = period
@RenewFlag = renewflag
end
def deserialize(params)
@Period = params['Period']
@RenewFlag = params['RenewFlag']
end
end
# 实例操作限制列表。
class InstanceDeniedActions < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例 ID。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type InstanceId: String
# @param DeniedActions: 操作限制列表。
# @type DeniedActions: Array
attr_accessor :InstanceId, :DeniedActions
def initialize(instanceid=nil, deniedactions=nil)
@InstanceId = instanceid
@DeniedActions = deniedactions
end
def deserialize(params)
@InstanceId = params['InstanceId']
unless params['DeniedActions'].nil?
@DeniedActions = []
params['DeniedActions'].each do |i|
deniedaction_tmp = DeniedAction.new
deniedaction_tmp.deserialize(i)
@DeniedActions << deniedaction_tmp
end
end
end
end
# 关于Lighthouse Instance实例的价格信息
class InstancePrice < TencentCloud::Common::AbstractModel
# @param OriginalBundlePrice: 套餐单价原价。
# @type OriginalBundlePrice: Float
# @param OriginalPrice: 原价。
# @type OriginalPrice: Float
# @param Discount: 折扣。
# @type Discount: Integer
# @param DiscountPrice: 折后价。
# @type DiscountPrice: Float
# @param Currency: 价格货币单位。取值范围CNY:人民币。USD:美元。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Currency: String
attr_accessor :OriginalBundlePrice, :OriginalPrice, :Discount, :DiscountPrice, :Currency
def initialize(originalbundleprice=nil, originalprice=nil, discount=nil, discountprice=nil, currency=nil)
@OriginalBundlePrice = originalbundleprice
@OriginalPrice = originalprice
@Discount = discount
@DiscountPrice = discountprice
@Currency = currency
end
def deserialize(params)
@OriginalBundlePrice = params['OriginalBundlePrice']
@OriginalPrice = params['OriginalPrice']
@Discount = params['Discount']
@DiscountPrice = params['DiscountPrice']
@Currency = params['Currency']
end
end
# 实例价格详细信息
class InstancePriceDetail < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type InstanceId: String
# @param InstancePrice: 询价信息。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type InstancePrice: :class:`Tencentcloud::Lighthouse.v20200324.models.InstancePrice`
# @param DiscountDetail: 折扣梯度详情，每个梯度包含的信息有：时长，折扣数，总价，折扣价，折扣详情（用户折扣、官网折扣、最终折扣）。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DiscountDetail: Array
attr_accessor :InstanceId, :InstancePrice, :DiscountDetail
def initialize(instanceid=nil, instanceprice=nil, discountdetail=nil)
@InstanceId = instanceid
@InstancePrice = instanceprice
@DiscountDetail = discountdetail
end
def deserialize(params)
@InstanceId = params['InstanceId']
unless params['InstancePrice'].nil?
@InstancePrice = InstancePrice.new
@InstancePrice.deserialize(params['InstancePrice'])
end
unless params['DiscountDetail'].nil?
@DiscountDetail = []
params['DiscountDetail'].each do |i|
discountdetail_tmp = DiscountDetail.new
discountdetail_tmp.deserialize(i)
@DiscountDetail << discountdetail_tmp
end
end
end
end
# 实例可退还信息。
class InstanceReturnable < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例 ID。
# @type InstanceId: String
# @param IsReturnable: 实例是否可退还。
# @type IsReturnable: Boolean
# @param ReturnFailCode: 实例退还失败错误码。
# @type ReturnFailCode: Integer
# @param ReturnFailMessage: 实例退还失败错误信息。
# @type ReturnFailMessage: String
attr_accessor :InstanceId, :IsReturnable, :ReturnFailCode, :ReturnFailMessage
def initialize(instanceid=nil, isreturnable=nil, returnfailcode=nil, returnfailmessage=nil)
@InstanceId = instanceid
@IsReturnable = isreturnable
@ReturnFailCode = returnfailcode
@ReturnFailMessage = returnfailmessage
end
def deserialize(params)
@InstanceId = params['InstanceId']
@IsReturnable = params['IsReturnable']
@ReturnFailCode = params['ReturnFailCode']
@ReturnFailMessage = params['ReturnFailMessage']
end
end
# 实例流量包详情
class InstanceTrafficPackage < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID。
# @type InstanceId: String
# @param TrafficPackageSet: 流量包详情列表。
# @type TrafficPackageSet: Array
attr_accessor :InstanceId, :TrafficPackageSet
def initialize(instanceid=nil, trafficpackageset=nil)
@InstanceId = instanceid
@TrafficPackageSet = trafficpackageset
end
def deserialize(params)
@InstanceId = params['InstanceId']
unless params['TrafficPackageSet'].nil?
@TrafficPackageSet = []
params['TrafficPackageSet'].each do |i|
trafficpackage_tmp = TrafficPackage.new
trafficpackage_tmp.deserialize(i)
@TrafficPackageSet << trafficpackage_tmp
end
end
end
end
# 描述了启动配置创建实例的公网可访问性，声明了实例的公网使用计费模式，最大带宽等。
class InternetAccessible < TencentCloud::Common::AbstractModel
# @param InternetChargeType: 网络计费类型，取值范围：
# 按流量包付费：TRAFFIC_POSTPAID_BY_HOUR
# 按带宽付费： BANDWIDTH_POSTPAID_BY_HOUR
# @type InternetChargeType: String
# @param InternetMaxBandwidthOut: 公网出带宽上限，单位：Mbps。
# @type InternetMaxBandwidthOut: Integer
# @param PublicIpAssigned: 是否分配公网 IP。
# @type PublicIpAssigned: Boolean
attr_accessor :InternetChargeType, :InternetMaxBandwidthOut, :PublicIpAssigned
def initialize(internetchargetype=nil, internetmaxbandwidthout=nil, publicipassigned=nil)
@InternetChargeType = internetchargetype
@InternetMaxBandwidthOut = internetmaxbandwidthout
@PublicIpAssigned = publicipassigned
end
def deserialize(params)
@InternetChargeType = params['InternetChargeType']
@InternetMaxBandwidthOut = params['InternetMaxBandwidthOut']
@PublicIpAssigned = params['PublicIpAssigned']
end
end
# IsolateInstances请求参数结构体
class IsolateInstancesRequest < TencentCloud::Common::AbstractModel
# @param InstanceIds: 实例ID列表。一个或多个待操作的实例ID。可通过[DescribeInstances](https://cloud.tencent.com/document/api/1207/47573)接口返回值中的InstanceId获取。每次请求退还实例和数据盘数量总计上限为20。
# @type InstanceIds: Array
# @param IsolateDataDisk: 是否退还挂载的数据盘。取值范围：
# TRUE：表示退还实例同时退还其挂载的数据盘。
# FALSE：表示退还实例同时不再退还其挂载的数据盘。
# 默认取值：TRUE。
# @type IsolateDataDisk: Boolean
attr_accessor :InstanceIds, :IsolateDataDisk
def initialize(instanceids=nil, isolatedatadisk=nil)
@InstanceIds = instanceids
@IsolateDataDisk = isolatedatadisk
end
def deserialize(params)
@InstanceIds = params['InstanceIds']
@IsolateDataDisk = params['IsolateDataDisk']
end
end
# IsolateInstances返回参数结构体
class IsolateInstancesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# 描述密钥对信息。
class KeyPair < TencentCloud::Common::AbstractModel
# @param KeyId: 密钥对 ID ，是密钥对的唯一标识。
# @type KeyId: String
# @param KeyName: 密钥对名称。
# @type KeyName: String
# @param PublicKey: 密钥对的纯文本公钥。
# @type PublicKey: String
# @param AssociatedInstanceIds: 密钥对关联的实例 ID 列表。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AssociatedInstanceIds: Array
# @param CreatedTime: 创建时间。按照 ISO8601 标准表示，并且使用 UTC 时间。格式为：YYYY-MM-DDThh:mm:ssZ
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CreatedTime: String
# @param PrivateKey: 密钥对私钥。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PrivateKey: String
attr_accessor :KeyId, :KeyName, :PublicKey, :AssociatedInstanceIds, :CreatedTime, :PrivateKey
def initialize(keyid=nil, keyname=nil, publickey=nil, associatedinstanceids=nil, createdtime=nil, privatekey=nil)
@KeyId = keyid
@KeyName = keyname
@PublicKey = publickey
@AssociatedInstanceIds = associatedinstanceids
@CreatedTime = createdtime
@PrivateKey = privatekey
end
def deserialize(params)
@KeyId = params['KeyId']
@KeyName = params['KeyName']
@PublicKey = params['PublicKey']
@AssociatedInstanceIds = params['AssociatedInstanceIds']
@CreatedTime = params['CreatedTime']
@PrivateKey = params['PrivateKey']
end
end
# 实例密码登录配置信息。
class LoginConfiguration < TencentCloud::Common::AbstractModel
# @param AutoGeneratePassword: "YES"代表选择自动生成密码，这时不指定Password字段。
# "NO"代表选择自定义密码，这时要指定Password字段。
# @type AutoGeneratePassword: String
# @param Password: 实例登录密码。具体按照操作系统的复杂度要求。
# WINDOWS 实例密码必须 12-30 位，不能以“/”开头且不包括用户名，至少包含以下字符中的三种不同字符
# 小写字母：[a-z]
# 大写字母：[A-Z]
# 数字： 0-9
# 特殊字符：()`~!@#$%^&*-+=_|{}[]:;' <>,.?/
# @type Password: String
attr_accessor :AutoGeneratePassword, :Password
def initialize(autogeneratepassword=nil, password=nil)
@AutoGeneratePassword = autogeneratepassword
@Password = password
end
def deserialize(params)
@AutoGeneratePassword = params['AutoGeneratePassword']
@Password = params['Password']
end
end
# 描述了实例登录相关配置与信息。
class LoginSettings < TencentCloud::Common::AbstractModel
# @param KeyIds: 密钥 ID 列表。关联密钥后，就可以通过对应的私钥来访问实例。注意：此字段可能返回 []，表示取不到有效值。
# @type KeyIds: Array
attr_accessor :KeyIds
def initialize(keyids=nil)
@KeyIds = keyids
end
def deserialize(params)
@KeyIds = params['KeyIds']
end
end
# ModifyBlueprintAttribute请求参数结构体
class ModifyBlueprintAttributeRequest < TencentCloud::Common::AbstractModel
# @param BlueprintId: 镜像 ID。可通过[DescribeBlueprints](https://cloud.tencent.com/document/product/1207/47689)接口返回值中的BlueprintId获取。
# @type BlueprintId: String
# @param BlueprintName: 设置新的镜像名称。最大长度60。
# @type BlueprintName: String
# @param Description: 设置新的镜像描述。最大长度60。
# @type Description: String
attr_accessor :BlueprintId, :BlueprintName, :Description
def initialize(blueprintid=nil, blueprintname=nil, description=nil)
@BlueprintId = blueprintid
@BlueprintName = blueprintname
@Description = description
end
def deserialize(params)
@BlueprintId = params['BlueprintId']
@BlueprintName = params['BlueprintName']
@Description = params['Description']
end
end
# ModifyBlueprintAttribute返回参数结构体
class ModifyBlueprintAttributeResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# 描述了实例可变更的套餐。
class ModifyBundle < TencentCloud::Common::AbstractModel
# @param ModifyPrice: 更改实例套餐后需要补的差价。
# @type ModifyPrice: :class:`Tencentcloud::Lighthouse.v20200324.models.Price`
# @param ModifyBundleState: 变更套餐状态。取值：
# SOLD_OUT：套餐售罄
# AVAILABLE：支持套餐变更
# UNAVAILABLE：暂不支持套餐变更
# @type ModifyBundleState: String
# @param Bundle: 套餐信息。
# @type Bundle: :class:`Tencentcloud::Lighthouse.v20200324.models.Bundle`
# @param NotSupportModifyMessage: 不支持套餐变更原因信息。变更套餐状态为"AVAILABLE"时, 该信息为空
# 注意：此字段可能返回 null，表示取不到有效值。
# @type NotSupportModifyMessage: String
attr_accessor :ModifyPrice, :ModifyBundleState, :Bundle, :NotSupportModifyMessage
def initialize(modifyprice=nil, modifybundlestate=nil, bundle=nil, notsupportmodifymessage=nil)
@ModifyPrice = modifyprice
@ModifyBundleState = modifybundlestate
@Bundle = bundle
@NotSupportModifyMessage = notsupportmodifymessage
end
def deserialize(params)
unless params['ModifyPrice'].nil?
@ModifyPrice = Price.new
@ModifyPrice.deserialize(params['ModifyPrice'])
end
@ModifyBundleState = params['ModifyBundleState']
unless params['Bundle'].nil?
@Bundle = Bundle.new
@Bundle.deserialize(params['Bundle'])
end
@NotSupportModifyMessage = params['NotSupportModifyMessage']
end
end
# ModifyDiskBackupsAttribute请求参数结构体
class ModifyDiskBackupsAttributeRequest < TencentCloud::Common::AbstractModel
# @param DiskBackupIds: 云硬盘备份点ID列表。
# @type DiskBackupIds: Array
# @param DiskBackupName: 云硬盘备份点名称，最大长度90。
# @type DiskBackupName: String
attr_accessor :DiskBackupIds, :DiskBackupName
def initialize(diskbackupids=nil, diskbackupname=nil)
@DiskBackupIds = diskbackupids
@DiskBackupName = diskbackupname
end
def deserialize(params)
@DiskBackupIds = params['DiskBackupIds']
@DiskBackupName = params['DiskBackupName']
end
end
# ModifyDiskBackupsAttribute返回参数结构体
class ModifyDiskBackupsAttributeResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyDisksAttribute请求参数结构体
class ModifyDisksAttributeRequest < TencentCloud::Common::AbstractModel
# @param DiskIds: 云硬盘ID列表。
# @type DiskIds: Array
# @param DiskName: 云硬盘名称。
# @type DiskName: String
attr_accessor :DiskIds, :DiskName
def initialize(diskids=nil, diskname=nil)
@DiskIds = diskids
@DiskName = diskname
end
def deserialize(params)
@DiskIds = params['DiskIds']
@DiskName = params['DiskName']
end
end
# ModifyDisksAttribute返回参数结构体
class ModifyDisksAttributeResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyDisksRenewFlag请求参数结构体
class ModifyDisksRenewFlagRequest < TencentCloud::Common::AbstractModel
# @param DiskIds: 云硬盘ID列表。
# @type DiskIds: Array
# @param RenewFlag: 续费标识。
# @type RenewFlag: String
attr_accessor :DiskIds, :RenewFlag
def initialize(diskids=nil, renewflag=nil)
@DiskIds = diskids
@RenewFlag = renewflag
end
def deserialize(params)
@DiskIds = params['DiskIds']
@RenewFlag = params['RenewFlag']
end
end
# ModifyDisksRenewFlag返回参数结构体
class ModifyDisksRenewFlagResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyFirewallRuleDescription请求参数结构体
class ModifyFirewallRuleDescriptionRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例 ID。
# @type InstanceId: String
# @param FirewallRule: 防火墙规则。
# @type FirewallRule: :class:`Tencentcloud::Lighthouse.v20200324.models.FirewallRule`
# @param FirewallVersion: 防火墙当前版本。用户每次更新防火墙规则时版本会自动加1，防止规则已过期，不填不考虑冲突。
# @type FirewallVersion: Integer
attr_accessor :InstanceId, :FirewallRule, :FirewallVersion
def initialize(instanceid=nil, firewallrule=nil, firewallversion=nil)
@InstanceId = instanceid
@FirewallRule = firewallrule
@FirewallVersion = firewallversion
end
def deserialize(params)
@InstanceId = params['InstanceId']
unless params['FirewallRule'].nil?
@FirewallRule = FirewallRule.new
@FirewallRule.deserialize(params['FirewallRule'])
end
@FirewallVersion = params['FirewallVersion']
end
end
# ModifyFirewallRuleDescription返回参数结构体
class ModifyFirewallRuleDescriptionResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyFirewallRules请求参数结构体
class ModifyFirewallRulesRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例 ID。
# @type InstanceId: String
# @param FirewallRules: 防火墙规则列表。
# @type FirewallRules: Array
# @param FirewallVersion: 防火墙当前版本。用户每次更新防火墙规则时版本会自动加1，防止规则已过期，不填不考虑冲突。
# @type FirewallVersion: Integer
attr_accessor :InstanceId, :FirewallRules, :FirewallVersion
def initialize(instanceid=nil, firewallrules=nil, firewallversion=nil)
@InstanceId = instanceid
@FirewallRules = firewallrules
@FirewallVersion = firewallversion
end
def deserialize(params)
@InstanceId = params['InstanceId']
unless params['FirewallRules'].nil?
@FirewallRules = []
params['FirewallRules'].each do |i|
firewallrule_tmp = FirewallRule.new
firewallrule_tmp.deserialize(i)
@FirewallRules << firewallrule_tmp
end
end
@FirewallVersion = params['FirewallVersion']
end
end
# ModifyFirewallRules返回参数结构体
class ModifyFirewallRulesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyInstancesAttribute请求参数结构体
class ModifyInstancesAttributeRequest < TencentCloud::Common::AbstractModel
# @param InstanceIds: 实例 ID 列表。每次请求批量实例的上限为 100。可通过[DescribeInstances](https://cloud.tencent.com/document/api/1207/47573)接口返回值中的InstanceId获取。
# @type InstanceIds: Array
# @param InstanceName: 实例名称。可任意命名，但不得超过 60 个字符。
# @type InstanceName: String
attr_accessor :InstanceIds, :InstanceName
def initialize(instanceids=nil, instancename=nil)
@InstanceIds = instanceids
@InstanceName = instancename
end
def deserialize(params)
@InstanceIds = params['InstanceIds']
@InstanceName = params['InstanceName']
end
end
# ModifyInstancesAttribute返回参数结构体
class ModifyInstancesAttributeResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyInstancesBundle请求参数结构体
class ModifyInstancesBundleRequest < TencentCloud::Common::AbstractModel
# @param InstanceIds: 实例ID列表。一个或多个待操作的实例ID。可通过[DescribeInstances](https://cloud.tencent.com/document/api/1207/47573)接口返回值中的InstanceId获取。每次请求批量实例的上限为30。
# @type InstanceIds: Array
# @param BundleId: 待变更的套餐Id。可通过[DescribeBundles](https://cloud.tencent.com/document/api/1207/47575)接口返回值中的BundleId获取。
# @type BundleId: String
# @param AutoVoucher: 是否自动抵扣代金券。取值范围：
# true：表示自动抵扣代金券
# false：表示不自动抵扣代金券
# 默认取值：false。
# @type AutoVoucher: Boolean
attr_accessor :InstanceIds, :BundleId, :AutoVoucher
def initialize(instanceids=nil, bundleid=nil, autovoucher=nil)
@InstanceIds = instanceids
@BundleId = bundleid
@AutoVoucher = autovoucher
end
def deserialize(params)
@InstanceIds = params['InstanceIds']
@BundleId = params['BundleId']
@AutoVoucher = params['AutoVoucher']
end
end
# ModifyInstancesBundle返回参数结构体
class ModifyInstancesBundleResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyInstancesLoginKeyPairAttribute请求参数结构体
class ModifyInstancesLoginKeyPairAttributeRequest < TencentCloud::Common::AbstractModel
# @param InstanceIds: 实例 ID 列表。每次请求批量实例的上限为 100。
# @type InstanceIds: Array
# @param PermitLogin: 是否允许使用默认密钥对登录，YES：允许登录；NO：禁止登录
# @type PermitLogin: String
attr_accessor :InstanceIds, :PermitLogin
def initialize(instanceids=nil, permitlogin=nil)
@InstanceIds = instanceids
@PermitLogin = permitlogin
end
def deserialize(params)
@InstanceIds = params['InstanceIds']
@PermitLogin = params['PermitLogin']
end
end
# ModifyInstancesLoginKeyPairAttribute返回参数结构体
class ModifyInstancesLoginKeyPairAttributeResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyInstancesRenewFlag请求参数结构体
class ModifyInstancesRenewFlagRequest < TencentCloud::Common::AbstractModel
# @param InstanceIds: 实例 ID 列表。每次请求批量实例的上限为 100。可通过[DescribeInstances](https://cloud.tencent.com/document/api/1207/47573)接口返回值中的InstanceId获取。
# @type InstanceIds: Array
# @param RenewFlag: 自动续费标识。取值范围：
NOTIFY_AND_AUTO_RENEW：通知过期且自动续费
NOTIFY_AND_MANUAL_RENEW：通知过期不自动续费
DISABLE_NOTIFY_AND_MANUAL_RENEW：不通知过期不自动续费
若该参数指定为NOTIFY_AND_AUTO_RENEW，在账户余额充足的情况下，实例到期后将按月自动续费。
# @type RenewFlag: String
attr_accessor :InstanceIds, :RenewFlag
def initialize(instanceids=nil, renewflag=nil)
@InstanceIds = instanceids
@RenewFlag = renewflag
end
def deserialize(params)
@InstanceIds = params['InstanceIds']
@RenewFlag = params['RenewFlag']
end
end
# ModifyInstancesRenewFlag返回参数结构体
class ModifyInstancesRenewFlagResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifySnapshotAttribute请求参数结构体
class ModifySnapshotAttributeRequest < TencentCloud::Common::AbstractModel
# @param SnapshotId: 快照 ID, 可通过 DescribeSnapshots 查询。
# @type SnapshotId: String
# @param SnapshotName: 新的快照名称，最长为 60 个字符。
# @type SnapshotName: String
attr_accessor :SnapshotId, :SnapshotName
def initialize(snapshotid=nil, snapshotname=nil)
@SnapshotId = snapshotid
@SnapshotName = snapshotname
end
def deserialize(params)
@SnapshotId = params['SnapshotId']
@SnapshotName = params['SnapshotName']
end
end
# ModifySnapshotAttribute返回参数结构体
class ModifySnapshotAttributeResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# 折扣详情信息。
class PolicyDetail < TencentCloud::Common::AbstractModel
# @param UserDiscount: 用户折扣。
# @type UserDiscount: Integer
# @param CommonDiscount: 公共折扣。
# @type CommonDiscount: Integer
# @param FinalDiscount: 最终折扣。
# @type FinalDiscount: Integer
# @param ActivityDiscount: 活动折扣。取值为null，表示无有效值，即没有折扣。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ActivityDiscount: Float
# @param DiscountType: 折扣类型。
# user：用户折扣; common：官网折扣; activity：活动折扣。 取值为null，表示无有效值，即没有折扣。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DiscountType: String
attr_accessor :UserDiscount, :CommonDiscount, :FinalDiscount, :ActivityDiscount, :DiscountType
def initialize(userdiscount=nil, commondiscount=nil, finaldiscount=nil, activitydiscount=nil, discounttype=nil)
@UserDiscount = userdiscount
@CommonDiscount = commondiscount
@FinalDiscount = finaldiscount
@ActivityDiscount = activitydiscount
@DiscountType = discounttype
end
def deserialize(params)
@UserDiscount = params['UserDiscount']
@CommonDiscount = params['CommonDiscount']
@FinalDiscount = params['FinalDiscount']
@ActivityDiscount = params['ActivityDiscount']
@DiscountType = params['DiscountType']
end
end
# 价格信息
class Price < TencentCloud::Common::AbstractModel
# @param InstancePrice: 实例价格。
# @type InstancePrice: :class:`Tencentcloud::Lighthouse.v20200324.models.InstancePrice`
attr_accessor :InstancePrice
def initialize(instanceprice=nil)
@InstancePrice = instanceprice
end
def deserialize(params)
unless params['InstancePrice'].nil?
@InstancePrice = InstancePrice.new
@InstancePrice.deserialize(params['InstancePrice'])
end
end
end
# RebootInstances请求参数结构体
class RebootInstancesRequest < TencentCloud::Common::AbstractModel
# @param InstanceIds: 实例 ID 列表。每次请求批量实例的上限为 100。可通过[DescribeInstances](https://cloud.tencent.com/document/api/1207/47573)接口返回值中的InstanceId获取。
# @type InstanceIds: Array
attr_accessor :InstanceIds
def initialize(instanceids=nil)
@InstanceIds = instanceids
end
def deserialize(params)
@InstanceIds = params['InstanceIds']
end
end
# RebootInstances返回参数结构体
class RebootInstancesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# 描述地域信息。
class RegionInfo < TencentCloud::Common::AbstractModel
# @param Region: 地域名称，例如，ap-guangzhou。
# @type Region: String
# @param RegionName: 地域描述，例如，华南地区(广州)。
# @type RegionName: String
# @param RegionState: 地域是否可用状态，取值仅为AVAILABLE。
# @type RegionState: String
# @param IsChinaMainland: 是否中国大陆地域
# @type IsChinaMainland: Boolean
attr_accessor :Region, :RegionName, :RegionState, :IsChinaMainland
def initialize(region=nil, regionname=nil, regionstate=nil, ischinamainland=nil)
@Region = region
@RegionName = regionname
@RegionState = regionstate
@IsChinaMainland = ischinamainland
end
def deserialize(params)
@Region = params['Region']
@RegionName = params['RegionName']
@RegionState = params['RegionState']
@IsChinaMainland = params['IsChinaMainland']
end
end
# 续费云硬盘包年包月相关参数设置
class RenewDiskChargePrepaid < TencentCloud::Common::AbstractModel
# @param Period: 新购周期。
# @type Period: Integer
# @param RenewFlag: 续费标识。
# @type RenewFlag: String
# @param TimeUnit: 周期单位. 默认值: "m"。
# @type TimeUnit: String
# @param CurInstanceDeadline: 当前实例到期时间。
# @type CurInstanceDeadline: String
attr_accessor :Period, :RenewFlag, :TimeUnit, :CurInstanceDeadline
def initialize(period=nil, renewflag=nil, timeunit=nil, curinstancedeadline=nil)
@Period = period
@RenewFlag = renewflag
@TimeUnit = timeunit
@CurInstanceDeadline = curinstancedeadline
end
def deserialize(params)
@Period = params['Period']
@RenewFlag = params['RenewFlag']
@TimeUnit = params['TimeUnit']
@CurInstanceDeadline = params['CurInstanceDeadline']
end
end
# RenewInstances请求参数结构体
class RenewInstancesRequest < TencentCloud::Common::AbstractModel
# @param InstanceIds: 实例ID列表。一个或多个待操作的实例ID。可通过[DescribeInstances](https://cloud.tencent.com/document/api/1207/47573)接口返回值中的InstanceId获取。每次请求批量实例的上限为100。
# @type InstanceIds: Array
# @param InstanceChargePrepaid: 预付费模式，即包年包月相关参数设置。通过该参数可以指定包年包月实例的购买时长、是否设置自动续费等属性。若指定实例的付费模式为预付费则该参数必传。
# @type InstanceChargePrepaid: :class:`Tencentcloud::Lighthouse.v20200324.models.InstanceChargePrepaid`
# @param RenewDataDisk: 是否续费弹性数据盘。取值范围：
# TRUE：表示续费实例同时续费其挂载的数据盘
# FALSE：表示续费实例同时不再续费其挂载的数据盘
# 默认取值：TRUE。
# @type RenewDataDisk: Boolean
# @param AutoVoucher: 是否自动抵扣代金券。取值范围：
# TRUE：表示自动抵扣代金券
# FALSE：表示不自动抵扣代金券
# 默认取值：FALSE。
# @type AutoVoucher: Boolean
attr_accessor :InstanceIds, :InstanceChargePrepaid, :RenewDataDisk, :AutoVoucher
def initialize(instanceids=nil, instancechargeprepaid=nil, renewdatadisk=nil, autovoucher=nil)
@InstanceIds = instanceids
@InstanceChargePrepaid = instancechargeprepaid
@RenewDataDisk = renewdatadisk
@AutoVoucher = autovoucher
end
def deserialize(params)
@InstanceIds = params['InstanceIds']
unless params['InstanceChargePrepaid'].nil?
@InstanceChargePrepaid = InstanceChargePrepaid.new
@InstanceChargePrepaid.deserialize(params['InstanceChargePrepaid'])
end
@RenewDataDisk = params['RenewDataDisk']
@AutoVoucher = params['AutoVoucher']
end
end
# RenewInstances返回参数结构体
class RenewInstancesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ResetAttachCcn请求参数结构体
class ResetAttachCcnRequest < TencentCloud::Common::AbstractModel
# @param CcnId: 云联网实例ID。
# @type CcnId: String
attr_accessor :CcnId
def initialize(ccnid=nil)
@CcnId = ccnid
end
def deserialize(params)
@CcnId = params['CcnId']
end
end
# ResetAttachCcn返回参数结构体
class ResetAttachCcnResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# 描述了镜像重置信息
class ResetInstanceBlueprint < TencentCloud::Common::AbstractModel
# @param BlueprintInfo: 镜像详细信息
# @type BlueprintInfo: :class:`Tencentcloud::Lighthouse.v20200324.models.Blueprint`
# @param IsResettable: 实例镜像是否可重置为目标镜像
# @type IsResettable: Boolean
# @param NonResettableMessage: 不可重置信息.当镜像可重置时为""
# @type NonResettableMessage: String
attr_accessor :BlueprintInfo, :IsResettable, :NonResettableMessage
def initialize(blueprintinfo=nil, isresettable=nil, nonresettablemessage=nil)
@BlueprintInfo = blueprintinfo
@IsResettable = isresettable
@NonResettableMessage = nonresettablemessage
end
def deserialize(params)
unless params['BlueprintInfo'].nil?
@BlueprintInfo = Blueprint.new
@BlueprintInfo.deserialize(params['BlueprintInfo'])
end
@IsResettable = params['IsResettable']
@NonResettableMessage = params['NonResettableMessage']
end
end
# ResetInstance请求参数结构体
class ResetInstanceRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例 ID。可通过[DescribeInstances](https://cloud.tencent.com/document/api/1207/47573)接口返回值中的InstanceId获取。
# @type InstanceId: String
# @param BlueprintId: 镜像 ID。可通过[DescribeBlueprints](https://cloud.tencent.com/document/product/1207/47689)接口返回值中的BlueprintId获取。
# @type BlueprintId: String
attr_accessor :InstanceId, :BlueprintId
def initialize(instanceid=nil, blueprintid=nil)
@InstanceId = instanceid
@BlueprintId = blueprintid
end
def deserialize(params)
@InstanceId = params['InstanceId']
@BlueprintId = params['BlueprintId']
end
end
# ResetInstance返回参数结构体
class ResetInstanceResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ResetInstancesPassword请求参数结构体
class ResetInstancesPasswordRequest < TencentCloud::Common::AbstractModel
# @param InstanceIds: 实例 ID 列表。每次请求批量实例的上限为 100。
# @type InstanceIds: Array
# @param Password: 实例登录密码。不同操作系统类型密码复杂度限制不一样，具体如下：
# `LINUX_UNIX` 实例密码必须 8-30 位，推荐使用 12 位以上密码，不能以“/”开头，至少包含以下字符中的三种不同字符，字符种类：
小写字母：[a-z]
大写字母：[A-Z]
数字：0-9
特殊字符： ()\`~!@#$%^&\*-+=\_|{}[]:;'<>,.?/
# `WINDOWS` 实例密码必须 12-30 位，不能以“/”开头且不包括用户名，至少包含以下字符中的三种不同字符
小写字母：[a-z]
大写字母：[A-Z]
数字： 0-9
特殊字符：()\`~!@#$%^&\*-+=\_|{}[]:;' <>,.?/
如果实例即包含 `LINUX_UNIX` 实例又包含 `WINDOWS` 实例，则密码复杂度限制按照 `WINDOWS` 实例的限制。
# @type Password: String
# @param UserName: 待重置密码的实例操作系统用户名。不得超过 64 个字符。
# @type UserName: String
attr_accessor :InstanceIds, :Password, :UserName
def initialize(instanceids=nil, password=nil, username=nil)
@InstanceIds = instanceids
@Password = password
@UserName = username
end
def deserialize(params)
@InstanceIds = params['InstanceIds']
@Password = params['Password']
@UserName = params['UserName']
end
end
# ResetInstancesPassword返回参数结构体
class ResetInstancesPasswordResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# 使用场景信息
class Scene < TencentCloud::Common::AbstractModel
# @param SceneId: 使用场景Id
# @type SceneId: String
# @param DisplayName: 使用场景展示名称
# @type DisplayName: String
# @param Description: 使用场景描述
# @type Description: String
attr_accessor :SceneId, :DisplayName, :Description
def initialize(sceneid=nil, displayname=nil, description=nil)
@SceneId = sceneid
@DisplayName = displayname
@Description = description
end
def deserialize(params)
@SceneId = params['SceneId']
@DisplayName = params['DisplayName']
@Description = params['Description']
end
end
# 使用场景详细信息
class SceneInfo < TencentCloud::Common::AbstractModel
# @param SceneId: 使用场景Id。
# @type SceneId: String
# @param DisplayName: 使用场景展示名称。
# @type DisplayName: String
# @param Description: 使用场景描述信息。
# @type Description: String
attr_accessor :SceneId, :DisplayName, :Description
def initialize(sceneid=nil, displayname=nil, description=nil)
@SceneId = sceneid
@DisplayName = displayname
@Description = description
end
def deserialize(params)
@SceneId = params['SceneId']
@DisplayName = params['DisplayName']
@Description = params['Description']
end
end
# 描述了快照相关信息。
class Snapshot < TencentCloud::Common::AbstractModel
# @param SnapshotId: 快照 ID。
# @type SnapshotId: String
# @param DiskUsage: 创建此快照的磁盘类型。取值：SYSTEM_DISK：系统盘
# @type DiskUsage: String
# @param DiskId: 创建此快照的磁盘 ID。
# @type DiskId: String
# @param DiskSize: 创建此快照的磁盘大小，单位 GB。
# @type DiskSize: Integer
# @param SnapshotName: 快照名称，用户自定义的快照别名。
# @type SnapshotName: String
# @param SnapshotState: 快照的状态。取值范围：
# NORMAL：正常
# CREATING：创建中
# ROLLBACKING：回滚中。
# @type SnapshotState: String
# @param Percent: 创建或回滚快照进度百分比，成功后此字段取值为 100。
# @type Percent: Integer
# @param LatestOperation: 快照的最新操作，只有创建、回滚快照时记录。
# 取值如 CreateInstanceSnapshot，RollbackInstanceSnapshot。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type LatestOperation: String
# @param LatestOperationState: 快照的最新操作状态，只有创建、回滚快照时记录。
# 取值范围：
# SUCCESS：表示操作成功
# OPERATING：表示操作执行中
# FAILED：表示操作失败
# 注意：此字段可能返回 null，表示取不到有效值。
# @type LatestOperationState: String
# @param LatestOperationRequestId: 快照最新操作的唯一请求 ID，只有创建、回滚快照时记录。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type LatestOperationRequestId: String
# @param CreatedTime: 快照的创建时间。
# @type CreatedTime: String
attr_accessor :SnapshotId, :DiskUsage, :DiskId, :DiskSize, :SnapshotName, :SnapshotState, :Percent, :LatestOperation, :LatestOperationState, :LatestOperationRequestId, :CreatedTime
def initialize(snapshotid=nil, diskusage=nil, diskid=nil, disksize=nil, snapshotname=nil, snapshotstate=nil, percent=nil, latestoperation=nil, latestoperationstate=nil, latestoperationrequestid=nil, createdtime=nil)
@SnapshotId = snapshotid
@DiskUsage = diskusage
@DiskId = diskid
@DiskSize = disksize
@SnapshotName = snapshotname
@SnapshotState = snapshotstate
@Percent = percent
@LatestOperation = latestoperation
@LatestOperationState = latestoperationstate
@LatestOperationRequestId = latestoperationrequestid
@CreatedTime = createdtime
end
def deserialize(params)
@SnapshotId = params['SnapshotId']
@DiskUsage = params['DiskUsage']
@DiskId = params['DiskId']
@DiskSize = params['DiskSize']
@SnapshotName = params['SnapshotName']
@SnapshotState = params['SnapshotState']
@Percent = params['Percent']
@LatestOperation = params['LatestOperation']
@LatestOperationState = params['LatestOperationState']
@LatestOperationRequestId = params['LatestOperationRequestId']
@CreatedTime = params['CreatedTime']
end
end
# 快照操作限制列表。
class SnapshotDeniedActions < TencentCloud::Common::AbstractModel
# @param SnapshotId: 快照 ID。
# @type SnapshotId: String
# @param DeniedActions: 操作限制列表。
# @type DeniedActions: Array
attr_accessor :SnapshotId, :DeniedActions
def initialize(snapshotid=nil, deniedactions=nil)
@SnapshotId = snapshotid
@DeniedActions = deniedactions
end
def deserialize(params)
@SnapshotId = params['SnapshotId']
unless params['DeniedActions'].nil?
@DeniedActions = []
params['DeniedActions'].each do |i|
deniedaction_tmp = DeniedAction.new
deniedaction_tmp.deserialize(i)
@DeniedActions << deniedaction_tmp
end
end
end
end
# 描述镜像软件信息。
class Software < TencentCloud::Common::AbstractModel
# @param Name: 软件名称。
# @type Name: String
# @param Version: 软件版本。
# @type Version: String
# @param ImageUrl: 软件图片 URL。
# @type ImageUrl: String
# @param InstallDir: 软件安装目录。
# @type InstallDir: String
# @param DetailSet: 软件详情列表。
# @type DetailSet: Array
attr_accessor :Name, :Version, :ImageUrl, :InstallDir, :DetailSet
def initialize(name=nil, version=nil, imageurl=nil, installdir=nil, detailset=nil)
@Name = name
@Version = version
@ImageUrl = imageurl
@InstallDir = installdir
@DetailSet = detailset
end
def deserialize(params)
@Name = params['Name']
@Version = params['Version']
@ImageUrl = params['ImageUrl']
@InstallDir = params['InstallDir']
unless params['DetailSet'].nil?
@DetailSet = []
params['DetailSet'].each do |i|
softwaredetail_tmp = SoftwareDetail.new
softwaredetail_tmp.deserialize(i)
@DetailSet << softwaredetail_tmp
end
end
end
end
# 描述镜像软件详细信息。
class SoftwareDetail < TencentCloud::Common::AbstractModel
# @param Key: 详情唯一键。
# @type Key: String
# @param Title: 详情标题。
# @type Title: String
# @param Value: 详情值。
# @type Value: String
attr_accessor :Key, :Title, :Value
def initialize(key=nil, title=nil, value=nil)
@Key = key
@Title = title
@Value = value
end
def deserialize(params)
@Key = params['Key']
@Title = params['Title']
@Value = params['Value']
end
end
# StartInstances请求参数结构体
class StartInstancesRequest < TencentCloud::Common::AbstractModel
# @param InstanceIds: 实例 ID 列表。每次请求批量实例的上限为 100。可通过[DescribeInstances](https://cloud.tencent.com/document/api/1207/47573)接口返回值中的InstanceId获取。
# @type InstanceIds: Array
attr_accessor :InstanceIds
def initialize(instanceids=nil)
@InstanceIds = instanceids
end
def deserialize(params)
@InstanceIds = params['InstanceIds']
end
end
# StartInstances返回参数结构体
class StartInstancesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# StopInstances请求参数结构体
class StopInstancesRequest < TencentCloud::Common::AbstractModel
# @param InstanceIds: 实例 ID 列表。每次请求批量实例的上限为 100。可通过[DescribeInstances](https://cloud.tencent.com/document/api/1207/47573)接口返回值中的InstanceId获取。
# @type InstanceIds: Array
attr_accessor :InstanceIds
def initialize(instanceids=nil)
@InstanceIds = instanceids
end
def deserialize(params)
@InstanceIds = params['InstanceIds']
end
end
# StopInstances返回参数结构体
class StopInstancesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# 描述了操作系统所在块设备即系统盘的信息。
class SystemDisk < TencentCloud::Common::AbstractModel
# @param DiskType: 系统盘类型。
# 取值范围：
# LOCAL_BASIC：本地硬盘 LOCAL_SSD：本地 SSD 硬盘 CLOUD_BASIC：普通云硬盘 CLOUD_SSD：SSD 云硬盘 CLOUD_PREMIUM：高性能云硬盘
# @type DiskType: String
# @param DiskSize: 系统盘大小，单位：GB。
# @type DiskSize: Integer
# @param DiskId: 系统盘ID。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DiskId: String
attr_accessor :DiskType, :DiskSize, :DiskId
def initialize(disktype=nil, disksize=nil, diskid=nil)
@DiskType = disktype
@DiskSize = disksize
@DiskId = diskid
end
def deserialize(params)
@DiskType = params['DiskType']
@DiskSize = params['DiskSize']
@DiskId = params['DiskId']
end
end
# 标签
class Tag < TencentCloud::Common::AbstractModel
# @param Key: 标签键
# @type Key: String
# @param Value: 标签值
# @type Value: String
attr_accessor :Key, :Value
def initialize(key=nil, value=nil)
@Key = key
@Value = value
end
def deserialize(params)
@Key = params['Key']
@Value = params['Value']
end
end
# TerminateDisks请求参数结构体
class TerminateDisksRequest < TencentCloud::Common::AbstractModel
# @param DiskIds: 云硬盘ID列表。
# @type DiskIds: Array
attr_accessor :DiskIds
def initialize(diskids=nil)
@DiskIds = diskids
end
def deserialize(params)
@DiskIds = params['DiskIds']
end
end
# TerminateDisks返回参数结构体
class TerminateDisksResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# TerminateInstances请求参数结构体
class TerminateInstancesRequest < TencentCloud::Common::AbstractModel
# @param InstanceIds: 实例ID列表。可通过[DescribeInstances](https://cloud.tencent.com/document/api/1207/47573)接口返回值中的InstanceId获取。
# @type InstanceIds: Array
attr_accessor :InstanceIds
def initialize(instanceids=nil)
@InstanceIds = instanceids
end
def deserialize(params)
@InstanceIds = params['InstanceIds']
end
end
# TerminateInstances返回参数结构体
class TerminateInstancesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# 总计价格信息
class TotalPrice < TencentCloud::Common::AbstractModel
# @param OriginalPrice: 原始总计价格。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type OriginalPrice: Float
# @param DiscountPrice: 折扣总计价格。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DiscountPrice: Float
attr_accessor :OriginalPrice, :DiscountPrice
def initialize(originalprice=nil, discountprice=nil)
@OriginalPrice = originalprice
@DiscountPrice = discountprice
end
def deserialize(params)
@OriginalPrice = params['OriginalPrice']
@DiscountPrice = params['DiscountPrice']
end
end
# 流量包详情
class TrafficPackage < TencentCloud::Common::AbstractModel
# @param TrafficPackageId: 流量包ID。
# @type TrafficPackageId: String
# @param TrafficUsed: 流量包生效周期内已使用流量，单位字节。
# @type TrafficUsed: Integer
# @param TrafficPackageTotal: 流量包生效周期内的总流量，单位字节。
# @type TrafficPackageTotal: Integer
# @param TrafficPackageRemaining: 流量包生效周期内的剩余流量，单位字节。
# @type TrafficPackageRemaining: Integer
# @param TrafficOverflow: 流量包生效周期内超出流量包额度的流量，单位字节。
# @type TrafficOverflow: Integer
# @param StartTime: 流量包生效周期开始时间。按照 ISO8601 标准表示，并且使用 UTC 时间。
# 格式为： YYYY-MM-DDThh:mm:ssZ。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type StartTime: String
# @param EndTime: 流量包生效周期结束时间。按照 ISO8601 标准表示，并且使用 UTC 时间。
# 格式为： YYYY-MM-DDThh:mm:ssZ。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type EndTime: String
# @param Deadline: 流量包到期时间。按照 ISO8601 标准表示，并且使用 UTC 时间。
# 格式为： YYYY-MM-DDThh:mm:ssZ。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Deadline: String
# @param Status: 流量包状态：
# NETWORK_NORMAL：正常
# OVERDUE_NETWORK_DISABLED：欠费断网
# @type Status: String
attr_accessor :TrafficPackageId, :TrafficUsed, :TrafficPackageTotal, :TrafficPackageRemaining, :TrafficOverflow, :StartTime, :EndTime, :Deadline, :Status
def initialize(trafficpackageid=nil, trafficused=nil, trafficpackagetotal=nil, trafficpackageremaining=nil, trafficoverflow=nil, starttime=nil, endtime=nil, deadline=nil, status=nil)
@TrafficPackageId = trafficpackageid
@TrafficUsed = trafficused
@TrafficPackageTotal = trafficpackagetotal
@TrafficPackageRemaining = trafficpackageremaining
@TrafficOverflow = trafficoverflow
@StartTime = starttime
@EndTime = endtime
@Deadline = deadline
@Status = status
end
def deserialize(params)
@TrafficPackageId = params['TrafficPackageId']
@TrafficUsed = params['TrafficUsed']
@TrafficPackageTotal = params['TrafficPackageTotal']
@TrafficPackageRemaining = params['TrafficPackageRemaining']
@TrafficOverflow = params['TrafficOverflow']
@StartTime = params['StartTime']
@EndTime = params['EndTime']
@Deadline = params['Deadline']
@Status = params['Status']
end
end
# 可用区详细信息
class ZoneInfo < TencentCloud::Common::AbstractModel
# @param Zone: 可用区
# @type Zone: String
# @param ZoneName: 可用区中文名称
# @type ZoneName: String
# @param InstanceDisplayLabel: 实例购买页可用区展示标签
# @type InstanceDisplayLabel: String
attr_accessor :Zone, :ZoneName, :InstanceDisplayLabel
def initialize(zone=nil, zonename=nil, instancedisplaylabel=nil)
@Zone = zone
@ZoneName = zonename
@InstanceDisplayLabel = instancedisplaylabel
end
def deserialize(params)
@Zone = params['Zone']
@ZoneName = params['ZoneName']
@InstanceDisplayLabel = params['InstanceDisplayLabel']
end
end
end
end
end