# frozen_string_literal: true
# Copyright (c) 2017-2018 THL A29 Limited, a Tencent company. All Rights Reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
module TencentCloud
module Dcdb
module V20180411
# 数据库账号信息
class Account < TencentCloud::Common::AbstractModel
# @param User: 账户的名称
# @type User: String
# @param Host: 账户的域名
# @type Host: String
attr_accessor :User, :Host
def initialize(user=nil, host=nil)
@User = user
@Host = host
end
def deserialize(params)
@User = params['User']
@Host = params['Host']
end
end
# ActiveHourDCDBInstance请求参数结构体
class ActiveHourDCDBInstanceRequest < TencentCloud::Common::AbstractModel
# @param InstanceIds: 待升级的实例ID列表。形如：["dcdbt-ow728lmc"]，可以通过 DescribeDCDBInstances 查询实例详情获得。
# @type InstanceIds: Array
attr_accessor :InstanceIds
def initialize(instanceids=nil)
@InstanceIds = instanceids
end
def deserialize(params)
@InstanceIds = params['InstanceIds']
end
end
# ActiveHourDCDBInstance返回参数结构体
class ActiveHourDCDBInstanceResponse < TencentCloud::Common::AbstractModel
# @param SuccessInstanceIds: 解隔离成功的实例id列表
# @type SuccessInstanceIds: Array
# @param FailedInstanceIds: 解隔离失败的实例id列表
# @type FailedInstanceIds: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :SuccessInstanceIds, :FailedInstanceIds, :RequestId
def initialize(successinstanceids=nil, failedinstanceids=nil, requestid=nil)
@SuccessInstanceIds = successinstanceids
@FailedInstanceIds = failedinstanceids
@RequestId = requestid
end
def deserialize(params)
@SuccessInstanceIds = params['SuccessInstanceIds']
@FailedInstanceIds = params['FailedInstanceIds']
@RequestId = params['RequestId']
end
end
# 升级实例 -- 新增分片类型
class AddShardConfig < TencentCloud::Common::AbstractModel
# @param ShardCount: 新增分片的数量
# @type ShardCount: Integer
# @param ShardMemory: 分片内存大小，单位 GB
# @type ShardMemory: Integer
# @param ShardStorage: 分片存储大小，单位 GB
# @type ShardStorage: Integer
attr_accessor :ShardCount, :ShardMemory, :ShardStorage
def initialize(shardcount=nil, shardmemory=nil, shardstorage=nil)
@ShardCount = shardcount
@ShardMemory = shardmemory
@ShardStorage = shardstorage
end
def deserialize(params)
@ShardCount = params['ShardCount']
@ShardMemory = params['ShardMemory']
@ShardStorage = params['ShardStorage']
end
end
# AssociateSecurityGroups请求参数结构体
class AssociateSecurityGroupsRequest < TencentCloud::Common::AbstractModel
# @param Product: 数据库引擎名称，本接口取值：dcdb。
# @type Product: String
# @param SecurityGroupId: 要绑定的安全组ID，类似sg-efil73jd。
# @type SecurityGroupId: String
# @param InstanceIds: 被绑定的实例ID，类似tdsqlshard-lesecurk，支持指定多个实例。
# @type InstanceIds: Array
attr_accessor :Product, :SecurityGroupId, :InstanceIds
def initialize(product=nil, securitygroupid=nil, instanceids=nil)
@Product = product
@SecurityGroupId = securitygroupid
@InstanceIds = instanceids
end
def deserialize(params)
@Product = params['Product']
@SecurityGroupId = params['SecurityGroupId']
@InstanceIds = params['InstanceIds']
end
end
# AssociateSecurityGroups返回参数结构体
class AssociateSecurityGroupsResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# 描述分片DB节点信息
class BriefNodeInfo < TencentCloud::Common::AbstractModel
# @param NodeId: DB节点ID
# @type NodeId: String
# @param Role: DB节点角色，取值为master或者slave
# @type Role: String
# @param ShardId: 节点所属分片的分片ID
# @type ShardId: String
attr_accessor :NodeId, :Role, :ShardId
def initialize(nodeid=nil, role=nil, shardid=nil)
@NodeId = nodeid
@Role = role
@ShardId = shardid
end
def deserialize(params)
@NodeId = params['NodeId']
@Role = params['Role']
@ShardId = params['ShardId']
end
end
# CancelDcnJob请求参数结构体
class CancelDcnJobRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 灾备实例ID
# @type InstanceId: String
attr_accessor :InstanceId
def initialize(instanceid=nil)
@InstanceId = instanceid
end
def deserialize(params)
@InstanceId = params['InstanceId']
end
end
# CancelDcnJob返回参数结构体
class CancelDcnJobResponse < TencentCloud::Common::AbstractModel
# @param FlowId: 流程ID
# @type FlowId: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :FlowId, :RequestId
def initialize(flowid=nil, requestid=nil)
@FlowId = flowid
@RequestId = requestid
end
def deserialize(params)
@FlowId = params['FlowId']
@RequestId = params['RequestId']
end
end
# CloneAccount请求参数结构体
class CloneAccountRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param SrcUser: 源用户账户名
# @type SrcUser: String
# @param SrcHost: 源用户HOST
# @type SrcHost: String
# @param DstUser: 目的用户账户名
# @type DstUser: String
# @param DstHost: 目的用户HOST
# @type DstHost: String
# @param DstDesc: 目的用户账户描述
# @type DstDesc: String
attr_accessor :InstanceId, :SrcUser, :SrcHost, :DstUser, :DstHost, :DstDesc
def initialize(instanceid=nil, srcuser=nil, srchost=nil, dstuser=nil, dsthost=nil, dstdesc=nil)
@InstanceId = instanceid
@SrcUser = srcuser
@SrcHost = srchost
@DstUser = dstuser
@DstHost = dsthost
@DstDesc = dstdesc
end
def deserialize(params)
@InstanceId = params['InstanceId']
@SrcUser = params['SrcUser']
@SrcHost = params['SrcHost']
@DstUser = params['DstUser']
@DstHost = params['DstHost']
@DstDesc = params['DstDesc']
end
end
# CloneAccount返回参数结构体
class CloneAccountResponse < TencentCloud::Common::AbstractModel
# @param FlowId: 异步任务流程ID
# @type FlowId: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :FlowId, :RequestId
def initialize(flowid=nil, requestid=nil)
@FlowId = flowid
@RequestId = requestid
end
def deserialize(params)
@FlowId = params['FlowId']
@RequestId = params['RequestId']
end
end
# CloseDBExtranetAccess请求参数结构体
class CloseDBExtranetAccessRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 待关闭外网访问的实例ID。形如：dcdbt-ow728lmc，可以通过 DescribeDCDBInstances 查询实例详情获得。
# @type InstanceId: String
# @param Ipv6Flag: 是否IPv6，默认0
# @type Ipv6Flag: Integer
attr_accessor :InstanceId, :Ipv6Flag
def initialize(instanceid=nil, ipv6flag=nil)
@InstanceId = instanceid
@Ipv6Flag = ipv6flag
end
def deserialize(params)
@InstanceId = params['InstanceId']
@Ipv6Flag = params['Ipv6Flag']
end
end
# CloseDBExtranetAccess返回参数结构体
class CloseDBExtranetAccessResponse < TencentCloud::Common::AbstractModel
# @param FlowId: 异步任务ID，可通过 DescribeFlow 查询任务状态。
# @type FlowId: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :FlowId, :RequestId
def initialize(flowid=nil, requestid=nil)
@FlowId = flowid
@RequestId = requestid
end
def deserialize(params)
@FlowId = params['FlowId']
@RequestId = params['RequestId']
end
end
# 列权限信息
class ColumnPrivilege < TencentCloud::Common::AbstractModel
# @param Database: 数据库名
# @type Database: String
# @param Table: 数据库表名
# @type Table: String
# @param Column: 数据库列名
# @type Column: String
# @param Privileges: 权限信息
# @type Privileges: Array
attr_accessor :Database, :Table, :Column, :Privileges
def initialize(database=nil, table=nil, column=nil, privileges=nil)
@Database = database
@Table = table
@Column = column
@Privileges = privileges
end
def deserialize(params)
@Database = params['Database']
@Table = params['Table']
@Column = params['Column']
@Privileges = params['Privileges']
end
end
# 配置信息。包含配置项Config，配置值Value
class ConfigValue < TencentCloud::Common::AbstractModel
# @param Config: 配置项的名称，支持填写max_user_connections
# @type Config: String
# @param Value: 配置值
# @type Value: String
attr_accessor :Config, :Value
def initialize(config=nil, value=nil)
@Config = config
@Value = value
end
def deserialize(params)
@Config = params['Config']
@Value = params['Value']
end
end
# 约束类型值的范围
class ConstraintRange < TencentCloud::Common::AbstractModel
# @param Min: 约束类型为section时的最小值
# @type Min: String
# @param Max: 约束类型为section时的最大值
# @type Max: String
attr_accessor :Min, :Max
def initialize(min=nil, max=nil)
@Min = min
@Max = max
end
def deserialize(params)
@Min = params['Min']
@Max = params['Max']
end
end
# CopyAccountPrivileges请求参数结构体
class CopyAccountPrivilegesRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例 ID，形如：dcdbt-ow728lmc。
# @type InstanceId: String
# @param SrcUserName: 源用户名
# @type SrcUserName: String
# @param SrcHost: 源用户允许的访问 host
# @type SrcHost: String
# @param DstUserName: 目的用户名
# @type DstUserName: String
# @param DstHost: 目的用户允许的访问 host
# @type DstHost: String
# @param SrcReadOnly: 源账号的 ReadOnly 属性
# @type SrcReadOnly: String
# @param DstReadOnly: 目的账号的 ReadOnly 属性
# @type DstReadOnly: String
attr_accessor :InstanceId, :SrcUserName, :SrcHost, :DstUserName, :DstHost, :SrcReadOnly, :DstReadOnly
def initialize(instanceid=nil, srcusername=nil, srchost=nil, dstusername=nil, dsthost=nil, srcreadonly=nil, dstreadonly=nil)
@InstanceId = instanceid
@SrcUserName = srcusername
@SrcHost = srchost
@DstUserName = dstusername
@DstHost = dsthost
@SrcReadOnly = srcreadonly
@DstReadOnly = dstreadonly
end
def deserialize(params)
@InstanceId = params['InstanceId']
@SrcUserName = params['SrcUserName']
@SrcHost = params['SrcHost']
@DstUserName = params['DstUserName']
@DstHost = params['DstHost']
@SrcReadOnly = params['SrcReadOnly']
@DstReadOnly = params['DstReadOnly']
end
end
# CopyAccountPrivileges返回参数结构体
class CopyAccountPrivilegesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# CreateAccount请求参数结构体
class CreateAccountRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例 ID，形如：dcdbt-ow728lmc，可以通过 DescribeDCDBInstances 查询实例详情获得。
# @type InstanceId: String
# @param UserName: AccountName
# @type UserName: String
# @param Host: 可以登录的主机，与mysql 账号的 host 格式一致，可以支持通配符，例如 %，10.%，10.20.%。
# @type Host: String
# @param Password: 账号密码，密码需要 8-32 个字符，不能以 '/' 开头，并且必须包含小写字母、大写字母、数字和符号()~!@#$%^&*-+=_|{}[]:<>,.?/。
# @type Password: String
# @param ReadOnly: 是否创建为只读账号，0：否， 1：该账号的sql请求优先选择备机执行，备机不可用时选择主机执行，2：优先选择备机执行，备机不可用时操作失败，3：只从备机读取。
# @type ReadOnly: Integer
# @param Description: 账号备注，可以包含中文、英文字符、常见符号和数字，长度为0~256字符
# @type Description: String
# @param DelayThresh: 如果备机延迟超过本参数设置值，系统将认为备机发生故障
# 建议该参数值大于10。当ReadOnly选择1、2时该参数生效。
# @type DelayThresh: Integer
# @param SlaveConst: 针对只读账号，设置策略是否固定备机，0：不固定备机，即备机不满足条件与客户端不断开连接，Proxy选择其他可用备机，1：备机不满足条件断开连接，确保一个连接固定备机。
# @type SlaveConst: Integer
# @param MaxUserConnections: 用户最大连接数限制参数。不传或者传0表示为不限制，对应max_user_connections参数，目前10.1内核版本不支持设置。
# @type MaxUserConnections: Integer
attr_accessor :InstanceId, :UserName, :Host, :Password, :ReadOnly, :Description, :DelayThresh, :SlaveConst, :MaxUserConnections
def initialize(instanceid=nil, username=nil, host=nil, password=nil, readonly=nil, description=nil, delaythresh=nil, slaveconst=nil, maxuserconnections=nil)
@InstanceId = instanceid
@UserName = username
@Host = host
@Password = password
@ReadOnly = readonly
@Description = description
@DelayThresh = delaythresh
@SlaveConst = slaveconst
@MaxUserConnections = maxuserconnections
end
def deserialize(params)
@InstanceId = params['InstanceId']
@UserName = params['UserName']
@Host = params['Host']
@Password = params['Password']
@ReadOnly = params['ReadOnly']
@Description = params['Description']
@DelayThresh = params['DelayThresh']
@SlaveConst = params['SlaveConst']
@MaxUserConnections = params['MaxUserConnections']
end
end
# CreateAccount返回参数结构体
class CreateAccountResponse < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID，透传入参。
# @type InstanceId: String
# @param UserName: 用户名，透传入参。
# @type UserName: String
# @param Host: 允许访问的 host，透传入参。
# @type Host: String
# @param ReadOnly: 透传入参。
# @type ReadOnly: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :InstanceId, :UserName, :Host, :ReadOnly, :RequestId
def initialize(instanceid=nil, username=nil, host=nil, readonly=nil, requestid=nil)
@InstanceId = instanceid
@UserName = username
@Host = host
@ReadOnly = readonly
@RequestId = requestid
end
def deserialize(params)
@InstanceId = params['InstanceId']
@UserName = params['UserName']
@Host = params['Host']
@ReadOnly = params['ReadOnly']
@RequestId = params['RequestId']
end
end
# CreateDCDBInstance请求参数结构体
class CreateDCDBInstanceRequest < TencentCloud::Common::AbstractModel
# @param Zones: 分片节点可用区分布，可填写多个可用区。
# 注意当前可售卖的可用区需要通过DescribeDCDBSaleInfo接口拉取。
# @type Zones: Array
# @param Period: 欲购买的时长，单位：月。
# @type Period: Integer
# @param ShardMemory: 分片内存大小，单位：GB，可以通过 DescribeShardSpec
# 查询实例规格获得。
# @type ShardMemory: Integer
# @param ShardStorage: 分片存储空间大小，单位：GB，可以通过 DescribeShardSpec
# 查询实例规格获得。
# @type ShardStorage: Integer
# @param ShardNodeCount: 单个分片节点个数，可以通过 DescribeShardSpec
# 查询实例规格获得。
# @type ShardNodeCount: Integer
# @param ShardCount: 实例分片个数，可选范围2-8，可以通过升级实例进行新增分片到最多64个分片。
# @type ShardCount: Integer
# @param Count: 欲购买实例的数量
# @type Count: Integer
# @param ProjectId: 项目 ID，可以通过查看项目列表获取，不传则关联到默认项目
# @type ProjectId: Integer
# @param VpcId: 虚拟私有网络 ID，不传或传空表示创建为基础网络
# @type VpcId: String
# @param SubnetId: 虚拟私有网络子网 ID，VpcId不为空时必填
# @type SubnetId: String
# @param DbVersionId: 数据库引擎版本，当前可选：8.0，5.7，10.1，10.0。
# @type DbVersionId: String
# @param AutoVoucher: 是否自动使用代金券进行支付，默认不使用。
# @type AutoVoucher: Boolean
# @param VoucherIds: 代金券ID列表，目前仅支持指定一张代金券。
# @type VoucherIds: Array
# @param SecurityGroupId: 安全组id
# @type SecurityGroupId: String
# @param InstanceName: 实例名称， 可以通过该字段自主的设置实例的名字
# @type InstanceName: String
# @param Ipv6Flag: 是否支持IPv6，0:不支持，1:支持
# @type Ipv6Flag: Integer
# @param ResourceTags: 标签键值对数组
# @type ResourceTags: Array
# @param InitParams: 参数列表。本接口的可选值为：character_set_server（字符集，必传），lower_case_table_names（表名大小写敏感，必传，0 - 敏感；1-不敏感），innodb_page_size（innodb数据页，默认16K），sync_mode（同步模式：0 - 异步； 1 - 强同步；2 - 强同步可退化。默认为强同步可退化）。
# @type InitParams: Array
# @param DcnRegion: DCN源地域
# @type DcnRegion: String
# @param DcnInstanceId: DCN源实例ID
# @type DcnInstanceId: String
# @param AutoRenewFlag: 自动续费标记，0:默认状态(用户未设置，即初始状态即手动续费，用户开通了预付费不停服特权也会进行自动续费)， 1:自动续费，2:明确不自动续费(用户设置)。若业务无续费概念或无需自动续费，需要设置为0
# @type AutoRenewFlag: Integer
# @param SecurityGroupIds: 安全组ids，安全组可以传数组形式，兼容之前SecurityGroupId参数
# @type SecurityGroupIds: Array
# @param DcnSyncMode: DCN同步模式，0：异步， 1：强同步
# @type DcnSyncMode: Integer
attr_accessor :Zones, :Period, :ShardMemory, :ShardStorage, :ShardNodeCount, :ShardCount, :Count, :ProjectId, :VpcId, :SubnetId, :DbVersionId, :AutoVoucher, :VoucherIds, :SecurityGroupId, :InstanceName, :Ipv6Flag, :ResourceTags, :InitParams, :DcnRegion, :DcnInstanceId, :AutoRenewFlag, :SecurityGroupIds, :DcnSyncMode
def initialize(zones=nil, period=nil, shardmemory=nil, shardstorage=nil, shardnodecount=nil, shardcount=nil, count=nil, projectid=nil, vpcid=nil, subnetid=nil, dbversionid=nil, autovoucher=nil, voucherids=nil, securitygroupid=nil, instancename=nil, ipv6flag=nil, resourcetags=nil, initparams=nil, dcnregion=nil, dcninstanceid=nil, autorenewflag=nil, securitygroupids=nil, dcnsyncmode=nil)
@Zones = zones
@Period = period
@ShardMemory = shardmemory
@ShardStorage = shardstorage
@ShardNodeCount = shardnodecount
@ShardCount = shardcount
@Count = count
@ProjectId = projectid
@VpcId = vpcid
@SubnetId = subnetid
@DbVersionId = dbversionid
@AutoVoucher = autovoucher
@VoucherIds = voucherids
@SecurityGroupId = securitygroupid
@InstanceName = instancename
@Ipv6Flag = ipv6flag
@ResourceTags = resourcetags
@InitParams = initparams
@DcnRegion = dcnregion
@DcnInstanceId = dcninstanceid
@AutoRenewFlag = autorenewflag
@SecurityGroupIds = securitygroupids
@DcnSyncMode = dcnsyncmode
end
def deserialize(params)
@Zones = params['Zones']
@Period = params['Period']
@ShardMemory = params['ShardMemory']
@ShardStorage = params['ShardStorage']
@ShardNodeCount = params['ShardNodeCount']
@ShardCount = params['ShardCount']
@Count = params['Count']
@ProjectId = params['ProjectId']
@VpcId = params['VpcId']
@SubnetId = params['SubnetId']
@DbVersionId = params['DbVersionId']
@AutoVoucher = params['AutoVoucher']
@VoucherIds = params['VoucherIds']
@SecurityGroupId = params['SecurityGroupId']
@InstanceName = params['InstanceName']
@Ipv6Flag = params['Ipv6Flag']
unless params['ResourceTags'].nil?
@ResourceTags = []
params['ResourceTags'].each do |i|
resourcetag_tmp = ResourceTag.new
resourcetag_tmp.deserialize(i)
@ResourceTags << resourcetag_tmp
end
end
unless params['InitParams'].nil?
@InitParams = []
params['InitParams'].each do |i|
dbparamvalue_tmp = DBParamValue.new
dbparamvalue_tmp.deserialize(i)
@InitParams << dbparamvalue_tmp
end
end
@DcnRegion = params['DcnRegion']
@DcnInstanceId = params['DcnInstanceId']
@AutoRenewFlag = params['AutoRenewFlag']
@SecurityGroupIds = params['SecurityGroupIds']
@DcnSyncMode = params['DcnSyncMode']
end
end
# CreateDCDBInstance返回参数结构体
class CreateDCDBInstanceResponse < TencentCloud::Common::AbstractModel
# @param DealName: 长订单号。可以据此调用 DescribeOrders
# 查询订单详细信息，或在支付失败时调用用户账号相关接口进行支付。
# @type DealName: String
# @param InstanceIds: 订单对应的实例 ID 列表，如果此处没有返回实例 ID，可以通过订单查询接口获取。还可通过实例查询接口查询实例是否创建完成。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type InstanceIds: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :DealName, :InstanceIds, :RequestId
def initialize(dealname=nil, instanceids=nil, requestid=nil)
@DealName = dealname
@InstanceIds = instanceids
@RequestId = requestid
end
def deserialize(params)
@DealName = params['DealName']
@InstanceIds = params['InstanceIds']
@RequestId = params['RequestId']
end
end
# CreateDedicatedClusterDCDBInstance请求参数结构体
class CreateDedicatedClusterDCDBInstanceRequest < TencentCloud::Common::AbstractModel
# @param GoodsNum: 分配实例个数
# @type GoodsNum: Integer
# @param ShardNum: 分片数量
# @type ShardNum: Integer
# @param ShardMemory: 分片內存大小, 单位GB
# @type ShardMemory: Integer
# @param ShardStorage: 分片磁盘大小, 单位GB
# @type ShardStorage: Integer
# @param ClusterId: 独享集群集群uuid
# @type ClusterId: String
# @param Zone: （废弃）可用区
# @type Zone: String
# @param ProjectId: 项目ID
# @type ProjectId: Integer
# @param Cpu: （废弃）cpu大小，单位：核
# @type Cpu: Integer
# @param VpcId: 网络ID
# @type VpcId: String
# @param SubnetId: 子网ID
# @type SubnetId: String
# @param ShardMachine: （废弃）分片机型
# @type ShardMachine: String
# @param ShardNodeNum: 分片的节点个数
# @type ShardNodeNum: Integer
# @param ShardNodeCpu: （废弃）节点cpu核数，单位：1/100核
# @type ShardNodeCpu: Integer
# @param ShardNodeMemory: （废弃）节点內存大小，单位：GB
# @type ShardNodeMemory: Integer
# @param ShardNodeStorage: （废弃）节点磁盘大小，单位：GB
# @type ShardNodeStorage: Integer
# @param DbVersionId: db版本
# @type DbVersionId: String
# @param SecurityGroupId: 安全组ID
# @type SecurityGroupId: String
# @param SecurityGroupIds: 安全组ID列表
# @type SecurityGroupIds: Array
# @param DcnInstanceId: DCN源实例ID
# @type DcnInstanceId: String
# @param DcnRegion: DCN源实例地域名
# @type DcnRegion: String
# @param InstanceName: 自定义实例名称
# @type InstanceName: String
# @param ResourceTags: 标签
# @type ResourceTags: Array
# @param Ipv6Flag: 支持IPv6标志：1 支持， 0 不支持
# @type Ipv6Flag: Integer
# @param Pid: （废弃）Pid，可通过获取独享集群售卖配置接口得到
# @type Pid: Integer
# @param InitParams: 参数列表。本接口的可选值为：character_set_server（字符集，必传），lower_case_table_names（表名大小写敏感，必传，0 - 敏感；1-不敏感），innodb_page_size（innodb数据页，默认16K），sync_mode（同步模式：0 - 异步； 1 - 强同步；2 - 强同步可退化。默认为强同步可退化）。
# @type InitParams: Array
# @param MasterHostId: 指定主节点uuid，不填随机分配
# @type MasterHostId: String
# @param SlaveHostIds: 指定从节点uuid，不填随机分配
# @type SlaveHostIds: Array
# @param RollbackInstanceId: 需要回档的源实例ID
# @type RollbackInstanceId: String
# @param RollbackTime: 回档时间
# @type RollbackTime: String
# @param DcnSyncMode: DCN同步模式，0：异步， 1：强同步
# @type DcnSyncMode: Integer
attr_accessor :GoodsNum, :ShardNum, :ShardMemory, :ShardStorage, :ClusterId, :Zone, :ProjectId, :Cpu, :VpcId, :SubnetId, :ShardMachine, :ShardNodeNum, :ShardNodeCpu, :ShardNodeMemory, :ShardNodeStorage, :DbVersionId, :SecurityGroupId, :SecurityGroupIds, :DcnInstanceId, :DcnRegion, :InstanceName, :ResourceTags, :Ipv6Flag, :Pid, :InitParams, :MasterHostId, :SlaveHostIds, :RollbackInstanceId, :RollbackTime, :DcnSyncMode
def initialize(goodsnum=nil, shardnum=nil, shardmemory=nil, shardstorage=nil, clusterid=nil, zone=nil, projectid=nil, cpu=nil, vpcid=nil, subnetid=nil, shardmachine=nil, shardnodenum=nil, shardnodecpu=nil, shardnodememory=nil, shardnodestorage=nil, dbversionid=nil, securitygroupid=nil, securitygroupids=nil, dcninstanceid=nil, dcnregion=nil, instancename=nil, resourcetags=nil, ipv6flag=nil, pid=nil, initparams=nil, masterhostid=nil, slavehostids=nil, rollbackinstanceid=nil, rollbacktime=nil, dcnsyncmode=nil)
@GoodsNum = goodsnum
@ShardNum = shardnum
@ShardMemory = shardmemory
@ShardStorage = shardstorage
@ClusterId = clusterid
@Zone = zone
@ProjectId = projectid
@Cpu = cpu
@VpcId = vpcid
@SubnetId = subnetid
@ShardMachine = shardmachine
@ShardNodeNum = shardnodenum
@ShardNodeCpu = shardnodecpu
@ShardNodeMemory = shardnodememory
@ShardNodeStorage = shardnodestorage
@DbVersionId = dbversionid
@SecurityGroupId = securitygroupid
@SecurityGroupIds = securitygroupids
@DcnInstanceId = dcninstanceid
@DcnRegion = dcnregion
@InstanceName = instancename
@ResourceTags = resourcetags
@Ipv6Flag = ipv6flag
@Pid = pid
@InitParams = initparams
@MasterHostId = masterhostid
@SlaveHostIds = slavehostids
@RollbackInstanceId = rollbackinstanceid
@RollbackTime = rollbacktime
@DcnSyncMode = dcnsyncmode
end
def deserialize(params)
@GoodsNum = params['GoodsNum']
@ShardNum = params['ShardNum']
@ShardMemory = params['ShardMemory']
@ShardStorage = params['ShardStorage']
@ClusterId = params['ClusterId']
@Zone = params['Zone']
@ProjectId = params['ProjectId']
@Cpu = params['Cpu']
@VpcId = params['VpcId']
@SubnetId = params['SubnetId']
@ShardMachine = params['ShardMachine']
@ShardNodeNum = params['ShardNodeNum']
@ShardNodeCpu = params['ShardNodeCpu']
@ShardNodeMemory = params['ShardNodeMemory']
@ShardNodeStorage = params['ShardNodeStorage']
@DbVersionId = params['DbVersionId']
@SecurityGroupId = params['SecurityGroupId']
@SecurityGroupIds = params['SecurityGroupIds']
@DcnInstanceId = params['DcnInstanceId']
@DcnRegion = params['DcnRegion']
@InstanceName = params['InstanceName']
unless params['ResourceTags'].nil?
@ResourceTags = []
params['ResourceTags'].each do |i|
resourcetag_tmp = ResourceTag.new
resourcetag_tmp.deserialize(i)
@ResourceTags << resourcetag_tmp
end
end
@Ipv6Flag = params['Ipv6Flag']
@Pid = params['Pid']
unless params['InitParams'].nil?
@InitParams = []
params['InitParams'].each do |i|
dbparamvalue_tmp = DBParamValue.new
dbparamvalue_tmp.deserialize(i)
@InitParams << dbparamvalue_tmp
end
end
@MasterHostId = params['MasterHostId']
@SlaveHostIds = params['SlaveHostIds']
@RollbackInstanceId = params['RollbackInstanceId']
@RollbackTime = params['RollbackTime']
@DcnSyncMode = params['DcnSyncMode']
end
end
# CreateDedicatedClusterDCDBInstance返回参数结构体
class CreateDedicatedClusterDCDBInstanceResponse < TencentCloud::Common::AbstractModel
# @param InstanceIds: 分配资源ID数组
# @type InstanceIds: Array
# @param FlowId: 流程ID
# @type FlowId: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :InstanceIds, :FlowId, :RequestId
def initialize(instanceids=nil, flowid=nil, requestid=nil)
@InstanceIds = instanceids
@FlowId = flowid
@RequestId = requestid
end
def deserialize(params)
@InstanceIds = params['InstanceIds']
@FlowId = params['FlowId']
@RequestId = params['RequestId']
end
end
# CreateHourDCDBInstance请求参数结构体
class CreateHourDCDBInstanceRequest < TencentCloud::Common::AbstractModel
# @param ShardMemory: 分片内存大小，单位：GB，可以通过 DescribeShardSpec
# 查询实例规格获得。
# @type ShardMemory: Integer
# @param ShardStorage: 分片存储空间大小，单位：GB，可以通过 DescribeShardSpec
# 查询实例规格获得。
# @type ShardStorage: Integer
# @param ShardNodeCount: 单个分片节点个数，可以通过 DescribeShardSpec
# 查询实例规格获得。
# @type ShardNodeCount: Integer
# @param ShardCount: 实例分片个数，可选范围2-8，可以通过升级实例进行新增分片到最多64个分片。
# @type ShardCount: Integer
# @param Count: 欲购买实例的数量
# @type Count: Integer
# @param ProjectId: 项目 ID，可以通过查看项目列表获取，不传则关联到默认项目
# @type ProjectId: Integer
# @param VpcId: 虚拟私有网络 ID，不传或传空表示创建为基础网络
# @type VpcId: String
# @param SubnetId: 虚拟私有网络子网 ID，VpcId不为空时必填
# @type SubnetId: String
# @param ShardCpu: 分片cpu大小，单位：核，可以通过 DescribeShardSpec
# 查询实例规格获得。
# @type ShardCpu: Integer
# @param DbVersionId: 数据库引擎版本，当前可选：8.0，5.7，10.1，10.0。
# @type DbVersionId: String
# @param Zones: 分片节点可用区分布，可填写多个可用区。
# @type Zones: Array
# @param SecurityGroupId: 安全组id
# @type SecurityGroupId: String
# @param InstanceName: 实例名称， 可以通过该字段自主的设置实例的名字
# @type InstanceName: String
# @param Ipv6Flag: 是否支持IPv6，0:不支持，1:支持
# @type Ipv6Flag: Integer
# @param ResourceTags: 标签键值对数组
# @type ResourceTags: Array
# @param DcnRegion: DCN源地域
# @type DcnRegion: String
# @param DcnInstanceId: DCN源实例ID
# @type DcnInstanceId: String
# @param InitParams: 参数列表。本接口的可选值为：character_set_server（字符集，必传），lower_case_table_names（表名大小写敏感，必传，0 - 敏感；1-不敏感），innodb_page_size（innodb数据页，默认16K），sync_mode（同步模式：0 - 异步； 1 - 强同步；2 - 强同步可退化。默认为强同步可退化）。
# @type InitParams: Array
# @param RollbackInstanceId: 需要回档的源实例ID
# @type RollbackInstanceId: String
# @param RollbackTime: 回档时间，例如“2021-11-22 00:00:00”
# @type RollbackTime: String
# @param SecurityGroupIds: 安全组ids，安全组可以传数组形式，兼容之前SecurityGroupId参数
# @type SecurityGroupIds: Array
# @param DcnSyncMode: DCN同步模式，0：异步， 1：强同步
# @type DcnSyncMode: Integer
attr_accessor :ShardMemory, :ShardStorage, :ShardNodeCount, :ShardCount, :Count, :ProjectId, :VpcId, :SubnetId, :ShardCpu, :DbVersionId, :Zones, :SecurityGroupId, :InstanceName, :Ipv6Flag, :ResourceTags, :DcnRegion, :DcnInstanceId, :InitParams, :RollbackInstanceId, :RollbackTime, :SecurityGroupIds, :DcnSyncMode
def initialize(shardmemory=nil, shardstorage=nil, shardnodecount=nil, shardcount=nil, count=nil, projectid=nil, vpcid=nil, subnetid=nil, shardcpu=nil, dbversionid=nil, zones=nil, securitygroupid=nil, instancename=nil, ipv6flag=nil, resourcetags=nil, dcnregion=nil, dcninstanceid=nil, initparams=nil, rollbackinstanceid=nil, rollbacktime=nil, securitygroupids=nil, dcnsyncmode=nil)
@ShardMemory = shardmemory
@ShardStorage = shardstorage
@ShardNodeCount = shardnodecount
@ShardCount = shardcount
@Count = count
@ProjectId = projectid
@VpcId = vpcid
@SubnetId = subnetid
@ShardCpu = shardcpu
@DbVersionId = dbversionid
@Zones = zones
@SecurityGroupId = securitygroupid
@InstanceName = instancename
@Ipv6Flag = ipv6flag
@ResourceTags = resourcetags
@DcnRegion = dcnregion
@DcnInstanceId = dcninstanceid
@InitParams = initparams
@RollbackInstanceId = rollbackinstanceid
@RollbackTime = rollbacktime
@SecurityGroupIds = securitygroupids
@DcnSyncMode = dcnsyncmode
end
def deserialize(params)
@ShardMemory = params['ShardMemory']
@ShardStorage = params['ShardStorage']
@ShardNodeCount = params['ShardNodeCount']
@ShardCount = params['ShardCount']
@Count = params['Count']
@ProjectId = params['ProjectId']
@VpcId = params['VpcId']
@SubnetId = params['SubnetId']
@ShardCpu = params['ShardCpu']
@DbVersionId = params['DbVersionId']
@Zones = params['Zones']
@SecurityGroupId = params['SecurityGroupId']
@InstanceName = params['InstanceName']
@Ipv6Flag = params['Ipv6Flag']
unless params['ResourceTags'].nil?
@ResourceTags = []
params['ResourceTags'].each do |i|
resourcetag_tmp = ResourceTag.new
resourcetag_tmp.deserialize(i)
@ResourceTags << resourcetag_tmp
end
end
@DcnRegion = params['DcnRegion']
@DcnInstanceId = params['DcnInstanceId']
unless params['InitParams'].nil?
@InitParams = []
params['InitParams'].each do |i|
dbparamvalue_tmp = DBParamValue.new
dbparamvalue_tmp.deserialize(i)
@InitParams << dbparamvalue_tmp
end
end
@RollbackInstanceId = params['RollbackInstanceId']
@RollbackTime = params['RollbackTime']
@SecurityGroupIds = params['SecurityGroupIds']
@DcnSyncMode = params['DcnSyncMode']
end
end
# CreateHourDCDBInstance返回参数结构体
class CreateHourDCDBInstanceResponse < TencentCloud::Common::AbstractModel
# @param InstanceIds: 订单对应的实例 ID 列表，如果此处没有返回实例 ID，可以通过订单查询接口获取。还可通过实例查询接口查询实例是否创建完成。
# @type InstanceIds: Array
# @param FlowId: 流程id，可以根据流程id查询创建进度
# @type FlowId: Integer
# @param DealName: 订单号。可以据此调用 DescribeOrders
# 查询订单详细信息，或在支付失败时调用用户账号相关接口进行支付。
# @type DealName: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :InstanceIds, :FlowId, :DealName, :RequestId
def initialize(instanceids=nil, flowid=nil, dealname=nil, requestid=nil)
@InstanceIds = instanceids
@FlowId = flowid
@DealName = dealname
@RequestId = requestid
end
def deserialize(params)
@InstanceIds = params['InstanceIds']
@FlowId = params['FlowId']
@DealName = params['DealName']
@RequestId = params['RequestId']
end
end
# CreateTmpDCDBInstance请求参数结构体
class CreateTmpDCDBInstanceRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 回档实例的ID
# @type InstanceId: String
# @param RollbackTime: 回档时间点
# @type RollbackTime: String
attr_accessor :InstanceId, :RollbackTime
def initialize(instanceid=nil, rollbacktime=nil)
@InstanceId = instanceid
@RollbackTime = rollbacktime
end
def deserialize(params)
@InstanceId = params['InstanceId']
@RollbackTime = params['RollbackTime']
end
end
# CreateTmpDCDBInstance返回参数结构体
class CreateTmpDCDBInstanceResponse < TencentCloud::Common::AbstractModel
# @param FlowId: 任务流ID
# @type FlowId: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :FlowId, :RequestId
def initialize(flowid=nil, requestid=nil)
@FlowId = flowid
@RequestId = requestid
end
def deserialize(params)
@FlowId = params['FlowId']
@RequestId = params['RequestId']
end
end
# 云数据库账号信息
class DBAccount < TencentCloud::Common::AbstractModel
# @param UserName: 用户名
# @type UserName: String
# @param Host: 用户可以从哪台主机登录（对应 MySQL 用户的 host 字段，UserName + Host 唯一标识一个用户，IP形式，IP段以%结尾；支持填入%；为空默认等于%）
# @type Host: String
# @param Description: 用户备注信息
# @type Description: String
# @param CreateTime: 创建时间
# @type CreateTime: String
# @param UpdateTime: 最后更新时间
# @type UpdateTime: String
# @param ReadOnly: 只读标记，0：否， 1：该账号的sql请求优先选择备机执行，备机不可用时选择主机执行，2：优先选择备机执行，备机不可用时操作失败。
# @type ReadOnly: Integer
# @param DelayThresh: 如果备机延迟超过本参数设置值，系统将认为备机发生故障
# 建议该参数值大于10。当ReadOnly选择1、2时该参数生效。
# @type DelayThresh: Integer
# @param SlaveConst: 针对只读账号，设置策略是否固定备机，0：不固定备机，即备机不满足条件与客户端不断开连接，Proxy选择其他可用备机，1：备机不满足条件断开连接，确保一个连接固定备机。
# @type SlaveConst: Integer
# @param MaxUserConnections: 用户最大连接数，0代表无限制
# @type MaxUserConnections: Integer
attr_accessor :UserName, :Host, :Description, :CreateTime, :UpdateTime, :ReadOnly, :DelayThresh, :SlaveConst, :MaxUserConnections
def initialize(username=nil, host=nil, description=nil, createtime=nil, updatetime=nil, readonly=nil, delaythresh=nil, slaveconst=nil, maxuserconnections=nil)
@UserName = username
@Host = host
@Description = description
@CreateTime = createtime
@UpdateTime = updatetime
@ReadOnly = readonly
@DelayThresh = delaythresh
@SlaveConst = slaveconst
@MaxUserConnections = maxuserconnections
end
def deserialize(params)
@UserName = params['UserName']
@Host = params['Host']
@Description = params['Description']
@CreateTime = params['CreateTime']
@UpdateTime = params['UpdateTime']
@ReadOnly = params['ReadOnly']
@DelayThresh = params['DelayThresh']
@SlaveConst = params['SlaveConst']
@MaxUserConnections = params['MaxUserConnections']
end
end
# 云数据库参数信息。
class DBParamValue < TencentCloud::Common::AbstractModel
# @param Param: 参数名称
# @type Param: String
# @param Value: 参数值
# @type Value: String
attr_accessor :Param, :Value
def initialize(param=nil, value=nil)
@Param = param
@Value = value
end
def deserialize(params)
@Param = params['Param']
@Value = params['Value']
end
end
# 分布式数据库实例信息
class DCDBInstanceInfo < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param InstanceName: 实例名称
# @type InstanceName: String
# @param AppId: 应用ID
# @type AppId: Integer
# @param ProjectId: 项目ID
# @type ProjectId: Integer
# @param Region: 地域
# @type Region: String
# @param Zone: 可用区
# @type Zone: String
# @param VpcId: VPC数字ID
# @type VpcId: Integer
# @param SubnetId: Subnet数字ID
# @type SubnetId: Integer
# @param StatusDesc: 状态中文描述
# @type StatusDesc: String
# @param Status: 实例状态：0 创建中，1 流程处理中， 2 运行中，3 实例未初始化，-1 实例已隔离，4 实例初始化中，5 实例删除中，6 实例重启中，7 数据迁移中
# @type Status: Integer
# @param Vip: 内网IP
# @type Vip: String
# @param Vport: 内网端口
# @type Vport: Integer
# @param CreateTime: 创建时间
# @type CreateTime: String
# @param AutoRenewFlag: 自动续费标志
# @type AutoRenewFlag: Integer
# @param Memory: 内存大小，单位 GB
# @type Memory: Integer
# @param Storage: 存储大小，单位 GB
# @type Storage: Integer
# @param ShardCount: 分片个数
# @type ShardCount: Integer
# @param PeriodEndTime: 到期时间
# @type PeriodEndTime: String
# @param IsolatedTimestamp: 隔离时间
# @type IsolatedTimestamp: String
# @param Uin: 账号ID
# @type Uin: String
# @param ShardDetail: 分片详情
# @type ShardDetail: Array
# @param NodeCount: 节点数，2 为一主一从， 3 为一主二从
# @type NodeCount: Integer
# @param IsTmp: 临时实例标记，0 为非临时实例
# @type IsTmp: Integer
# @param ExclusterId: 独享集群ID，为空表示非独享集群实例
# @type ExclusterId: String
# @param UniqueVpcId: 字符串型的私有网络ID
# @type UniqueVpcId: String
# @param UniqueSubnetId: 字符串型的私有网络子网ID
# @type UniqueSubnetId: String
# @param Id: 数字实例ID（过时字段，请勿依赖该值）
# @type Id: Integer
# @param WanDomain: 外网访问的域名，公网可解析
# @type WanDomain: String
# @param WanVip: 外网 IP 地址，公网可访问
# @type WanVip: String
# @param WanPort: 外网端口
# @type WanPort: Integer
# @param Pid: 产品类型 ID（过时字段，请勿依赖该值）
# @type Pid: Integer
# @param UpdateTime: 实例最后更新时间，格式为 2006-01-02 15:04:05
# @type UpdateTime: String
# @param DbEngine: 数据库引擎
# @type DbEngine: String
# @param DbVersion: 数据库引擎版本
# @type DbVersion: String
# @param Paymode: 付费模式
# @type Paymode: String
# @param Locker: 实例处于异步任务状态时，表示异步任务流程ID
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Locker: Integer
# @param WanStatus: 外网状态，0-未开通；1-已开通；2-关闭；3-开通中
# @type WanStatus: Integer
# @param IsAuditSupported: 该实例是否支持审计。1-支持；0-不支持
# @type IsAuditSupported: Integer
# @param Cpu: Cpu核数
# @type Cpu: Integer
# @param Ipv6Flag: 实例IPv6标志
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Ipv6Flag: Integer
# @param Vipv6: 内网IPv6
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Vipv6: String
# @param WanVipv6: 外网IPv6
# 注意：此字段可能返回 null，表示取不到有效值。
# @type WanVipv6: String
# @param WanPortIpv6: 外网IPv6端口
# 注意：此字段可能返回 null，表示取不到有效值。
# @type WanPortIpv6: Integer
# @param WanStatusIpv6: 外网IPv6状态
# 注意：此字段可能返回 null，表示取不到有效值。
# @type WanStatusIpv6: Integer
# @param DcnFlag: DCN标志，0-无，1-主实例，2-灾备实例
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DcnFlag: Integer
# @param DcnStatus: DCN状态，0-无，1-创建中，2-同步中，3-已断开
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DcnStatus: Integer
# @param DcnDstNum: DCN灾备实例数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DcnDstNum: Integer
# @param InstanceType: 1： 主实例（独享型）, 2: 主实例, 3： 灾备实例, 4： 灾备实例（独享型）
# 注意：此字段可能返回 null，表示取不到有效值。
# @type InstanceType: Integer
# @param ResourceTags: 实例标签信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ResourceTags: Array
# @param DbVersionId: 数据库引擎版本
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DbVersionId: String
attr_accessor :InstanceId, :InstanceName, :AppId, :ProjectId, :Region, :Zone, :VpcId, :SubnetId, :StatusDesc, :Status, :Vip, :Vport, :CreateTime, :AutoRenewFlag, :Memory, :Storage, :ShardCount, :PeriodEndTime, :IsolatedTimestamp, :Uin, :ShardDetail, :NodeCount, :IsTmp, :ExclusterId, :UniqueVpcId, :UniqueSubnetId, :Id, :WanDomain, :WanVip, :WanPort, :Pid, :UpdateTime, :DbEngine, :DbVersion, :Paymode, :Locker, :WanStatus, :IsAuditSupported, :Cpu, :Ipv6Flag, :Vipv6, :WanVipv6, :WanPortIpv6, :WanStatusIpv6, :DcnFlag, :DcnStatus, :DcnDstNum, :InstanceType, :ResourceTags, :DbVersionId
def initialize(instanceid=nil, instancename=nil, appid=nil, projectid=nil, region=nil, zone=nil, vpcid=nil, subnetid=nil, statusdesc=nil, status=nil, vip=nil, vport=nil, createtime=nil, autorenewflag=nil, memory=nil, storage=nil, shardcount=nil, periodendtime=nil, isolatedtimestamp=nil, uin=nil, sharddetail=nil, nodecount=nil, istmp=nil, exclusterid=nil, uniquevpcid=nil, uniquesubnetid=nil, id=nil, wandomain=nil, wanvip=nil, wanport=nil, pid=nil, updatetime=nil, dbengine=nil, dbversion=nil, paymode=nil, locker=nil, wanstatus=nil, isauditsupported=nil, cpu=nil, ipv6flag=nil, vipv6=nil, wanvipv6=nil, wanportipv6=nil, wanstatusipv6=nil, dcnflag=nil, dcnstatus=nil, dcndstnum=nil, instancetype=nil, resourcetags=nil, dbversionid=nil)
@InstanceId = instanceid
@InstanceName = instancename
@AppId = appid
@ProjectId = projectid
@Region = region
@Zone = zone
@VpcId = vpcid
@SubnetId = subnetid
@StatusDesc = statusdesc
@Status = status
@Vip = vip
@Vport = vport
@CreateTime = createtime
@AutoRenewFlag = autorenewflag
@Memory = memory
@Storage = storage
@ShardCount = shardcount
@PeriodEndTime = periodendtime
@IsolatedTimestamp = isolatedtimestamp
@Uin = uin
@ShardDetail = sharddetail
@NodeCount = nodecount
@IsTmp = istmp
@ExclusterId = exclusterid
@UniqueVpcId = uniquevpcid
@UniqueSubnetId = uniquesubnetid
@Id = id
@WanDomain = wandomain
@WanVip = wanvip
@WanPort = wanport
@Pid = pid
@UpdateTime = updatetime
@DbEngine = dbengine
@DbVersion = dbversion
@Paymode = paymode
@Locker = locker
@WanStatus = wanstatus
@IsAuditSupported = isauditsupported
@Cpu = cpu
@Ipv6Flag = ipv6flag
@Vipv6 = vipv6
@WanVipv6 = wanvipv6
@WanPortIpv6 = wanportipv6
@WanStatusIpv6 = wanstatusipv6
@DcnFlag = dcnflag
@DcnStatus = dcnstatus
@DcnDstNum = dcndstnum
@InstanceType = instancetype
@ResourceTags = resourcetags
@DbVersionId = dbversionid
end
def deserialize(params)
@InstanceId = params['InstanceId']
@InstanceName = params['InstanceName']
@AppId = params['AppId']
@ProjectId = params['ProjectId']
@Region = params['Region']
@Zone = params['Zone']
@VpcId = params['VpcId']
@SubnetId = params['SubnetId']
@StatusDesc = params['StatusDesc']
@Status = params['Status']
@Vip = params['Vip']
@Vport = params['Vport']
@CreateTime = params['CreateTime']
@AutoRenewFlag = params['AutoRenewFlag']
@Memory = params['Memory']
@Storage = params['Storage']
@ShardCount = params['ShardCount']
@PeriodEndTime = params['PeriodEndTime']
@IsolatedTimestamp = params['IsolatedTimestamp']
@Uin = params['Uin']
unless params['ShardDetail'].nil?
@ShardDetail = []
params['ShardDetail'].each do |i|
shardinfo_tmp = ShardInfo.new
shardinfo_tmp.deserialize(i)
@ShardDetail << shardinfo_tmp
end
end
@NodeCount = params['NodeCount']
@IsTmp = params['IsTmp']
@ExclusterId = params['ExclusterId']
@UniqueVpcId = params['UniqueVpcId']
@UniqueSubnetId = params['UniqueSubnetId']
@Id = params['Id']
@WanDomain = params['WanDomain']
@WanVip = params['WanVip']
@WanPort = params['WanPort']
@Pid = params['Pid']
@UpdateTime = params['UpdateTime']
@DbEngine = params['DbEngine']
@DbVersion = params['DbVersion']
@Paymode = params['Paymode']
@Locker = params['Locker']
@WanStatus = params['WanStatus']
@IsAuditSupported = params['IsAuditSupported']
@Cpu = params['Cpu']
@Ipv6Flag = params['Ipv6Flag']
@Vipv6 = params['Vipv6']
@WanVipv6 = params['WanVipv6']
@WanPortIpv6 = params['WanPortIpv6']
@WanStatusIpv6 = params['WanStatusIpv6']
@DcnFlag = params['DcnFlag']
@DcnStatus = params['DcnStatus']
@DcnDstNum = params['DcnDstNum']
@InstanceType = params['InstanceType']
unless params['ResourceTags'].nil?
@ResourceTags = []
params['ResourceTags'].each do |i|
resourcetag_tmp = ResourceTag.new
resourcetag_tmp.deserialize(i)
@ResourceTags << resourcetag_tmp
end
end
@DbVersionId = params['DbVersionId']
end
end
# 描述分布式数据库分片信息。
class DCDBShardInfo < TencentCloud::Common::AbstractModel
# @param InstanceId: 所属实例Id
# @type InstanceId: String
# @param ShardSerialId: 分片SQL透传Id，用于将sql透传到指定分片执行
# @type ShardSerialId: String
# @param ShardInstanceId: 全局唯一的分片Id
# @type ShardInstanceId: String
# @param Status: 状态：0 创建中，1 流程处理中， 2 运行中，3 分片未初始化
# @type Status: Integer
# @param StatusDesc: 状态中文描述
# @type StatusDesc: String
# @param CreateTime: 创建时间
# @type CreateTime: String
# @param VpcId: 字符串格式的私有网络Id
# @type VpcId: String
# @param SubnetId: 字符串格式的私有网络子网Id
# @type SubnetId: String
# @param ProjectId: 项目ID
# @type ProjectId: Integer
# @param Region: 地域
# @type Region: String
# @param Zone: 可用区
# @type Zone: String
# @param Memory: 内存大小，单位 GB
# @type Memory: Integer
# @param Storage: 存储大小，单位 GB
# @type Storage: Integer
# @param PeriodEndTime: 到期时间
# @type PeriodEndTime: String
# @param NodeCount: 节点数，2 为一主一从， 3 为一主二从
# @type NodeCount: Integer
# @param StorageUsage: 存储使用率，单位为 %
# @type StorageUsage: Float
# @param MemoryUsage: 内存使用率，单位为 %
# @type MemoryUsage: Float
# @param ShardId: 数字分片Id（过时字段，请勿依赖该值）
# @type ShardId: Integer
# @param Pid: 产品ProductID
# @type Pid: Integer
# @param ProxyVersion: Proxy版本
# @type ProxyVersion: String
# @param Paymode: 付费模型
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Paymode: String
# @param ShardMasterZone: 分片的主可用区
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ShardMasterZone: String
# @param ShardSlaveZones: 分片的从可用区列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ShardSlaveZones: Array
# @param Cpu: CPU核数
# @type Cpu: Integer
# @param Range: 分片ShardKey的范围（总共64个哈希值），例如： 0-31，32-63
# @type Range: String
attr_accessor :InstanceId, :ShardSerialId, :ShardInstanceId, :Status, :StatusDesc, :CreateTime, :VpcId, :SubnetId, :ProjectId, :Region, :Zone, :Memory, :Storage, :PeriodEndTime, :NodeCount, :StorageUsage, :MemoryUsage, :ShardId, :Pid, :ProxyVersion, :Paymode, :ShardMasterZone, :ShardSlaveZones, :Cpu, :Range
def initialize(instanceid=nil, shardserialid=nil, shardinstanceid=nil, status=nil, statusdesc=nil, createtime=nil, vpcid=nil, subnetid=nil, projectid=nil, region=nil, zone=nil, memory=nil, storage=nil, periodendtime=nil, nodecount=nil, storageusage=nil, memoryusage=nil, shardid=nil, pid=nil, proxyversion=nil, paymode=nil, shardmasterzone=nil, shardslavezones=nil, cpu=nil, range=nil)
@InstanceId = instanceid
@ShardSerialId = shardserialid
@ShardInstanceId = shardinstanceid
@Status = status
@StatusDesc = statusdesc
@CreateTime = createtime
@VpcId = vpcid
@SubnetId = subnetid
@ProjectId = projectid
@Region = region
@Zone = zone
@Memory = memory
@Storage = storage
@PeriodEndTime = periodendtime
@NodeCount = nodecount
@StorageUsage = storageusage
@MemoryUsage = memoryusage
@ShardId = shardid
@Pid = pid
@ProxyVersion = proxyversion
@Paymode = paymode
@ShardMasterZone = shardmasterzone
@ShardSlaveZones = shardslavezones
@Cpu = cpu
@Range = range
end
def deserialize(params)
@InstanceId = params['InstanceId']
@ShardSerialId = params['ShardSerialId']
@ShardInstanceId = params['ShardInstanceId']
@Status = params['Status']
@StatusDesc = params['StatusDesc']
@CreateTime = params['CreateTime']
@VpcId = params['VpcId']
@SubnetId = params['SubnetId']
@ProjectId = params['ProjectId']
@Region = params['Region']
@Zone = params['Zone']
@Memory = params['Memory']
@Storage = params['Storage']
@PeriodEndTime = params['PeriodEndTime']
@NodeCount = params['NodeCount']
@StorageUsage = params['StorageUsage']
@MemoryUsage = params['MemoryUsage']
@ShardId = params['ShardId']
@Pid = params['Pid']
@ProxyVersion = params['ProxyVersion']
@Paymode = params['Paymode']
@ShardMasterZone = params['ShardMasterZone']
@ShardSlaveZones = params['ShardSlaveZones']
@Cpu = params['Cpu']
@Range = params['Range']
end
end
# 数据库信息
class Database < TencentCloud::Common::AbstractModel
# @param DbName: 数据库名称
# @type DbName: String
attr_accessor :DbName
def initialize(dbname=nil)
@DbName = dbname
end
def deserialize(params)
@DbName = params['DbName']
end
end
# 数据库函数信息
class DatabaseFunction < TencentCloud::Common::AbstractModel
# @param Func: 函数名称
# @type Func: String
attr_accessor :Func
def initialize(func=nil)
@Func = func
end
def deserialize(params)
@Func = params['Func']
end
end
# 数据库权限
class DatabasePrivilege < TencentCloud::Common::AbstractModel
# @param Privileges: 权限信息
# @type Privileges: Array
# @param Database: 数据库名
# @type Database: String
attr_accessor :Privileges, :Database
def initialize(privileges=nil, database=nil)
@Privileges = privileges
@Database = database
end
def deserialize(params)
@Privileges = params['Privileges']
@Database = params['Database']
end
end
# 数据库存储过程信息
class DatabaseProcedure < TencentCloud::Common::AbstractModel
# @param Proc: 存储过程名称
# @type Proc: String
attr_accessor :Proc
def initialize(proc=nil)
@Proc = proc
end
def deserialize(params)
@Proc = params['Proc']
end
end
# 数据库表信息
class DatabaseTable < TencentCloud::Common::AbstractModel
# @param Table: 表名
# @type Table: String
attr_accessor :Table
def initialize(table=nil)
@Table = table
end
def deserialize(params)
@Table = params['Table']
end
end
# 数据库视图信息
class DatabaseView < TencentCloud::Common::AbstractModel
# @param View: 视图名称
# @type View: String
attr_accessor :View
def initialize(view=nil)
@View = view
end
def deserialize(params)
@View = params['View']
end
end
# DCN详情条目
class DcnDetailItem < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param InstanceName: 实例名称
# @type InstanceName: String
# @param Region: 实例地域
# @type Region: String
# @param Zone: 实例可用区
# @type Zone: String
# @param Vip: 实例IP地址
# @type Vip: String
# @param Vipv6: 实例IPv6地址
# @type Vipv6: String
# @param Vport: 实例端口
# @type Vport: Integer
# @param Status: 实例状态
# @type Status: Integer
# @param StatusDesc: 实例状态描述
# @type StatusDesc: String
# @param DcnFlag: 实例DCN标志，1-主，2-备
# @type DcnFlag: Integer
# @param DcnStatus: 实例DCN状态，0-无，1-创建中，2-同步中，3-已断开
# @type DcnStatus: Integer
# @param Cpu: 实例CPU核数
# @type Cpu: Integer
# @param Memory: 实例内存大小，单位 GB
# @type Memory: Integer
# @param Storage: 实例存储大小，单位 GB
# @type Storage: Integer
# @param PayMode: 付费模式
# @type PayMode: Integer
# @param CreateTime: 实例创建时间，格式为 2006-01-02 15:04:05
# @type CreateTime: String
# @param PeriodEndTime: 实例到期时间，格式为 2006-01-02 15:04:05
# @type PeriodEndTime: String
# @param InstanceType: 1： 主实例（独享型）, 2: 主实例, 3： 灾备实例, 4： 灾备实例（独享型）
# @type InstanceType: Integer
# @param EncryptStatus: 是否开启了 kms
# @type EncryptStatus: Integer
# @param DcnStatusDesc: 实例DCN状态描述信息
# @type DcnStatusDesc: String
# @param PolarisInstanceId: DCN实例绑定的北极星服务所属的北极星实例Id，若未绑定则为空
# @type PolarisInstanceId: String
# @param PolarisInstanceName: DCN实例绑定的北极星服务所属的北极星实例名，若未绑定则为空
# @type PolarisInstanceName: String
# @param PolarisNamespace: DCN实例绑定的北极星服务所属的北极星命名空间，若未绑定则为空
# @type PolarisNamespace: String
# @param PolarisService: DCN实例绑定的北极星服务，若未绑定则为空
# @type PolarisService: String
# @param PolarisServiceStatus: DCN实例在北极星服务中的状态 0:未开启; 1:已开启; 2:已隔离; 3:切换中
# @type PolarisServiceStatus: Integer
# @param PolarisServiceStatusDesc: DCN实例在北极星服务中的状态的描述信息
# @type PolarisServiceStatusDesc: String
# @param PolarisRegion: 北极星管控地域
# @type PolarisRegion: String
# @param IsDcnSwitchSupported: 是否支持DCN切换
# @type IsDcnSwitchSupported: Integer
attr_accessor :InstanceId, :InstanceName, :Region, :Zone, :Vip, :Vipv6, :Vport, :Status, :StatusDesc, :DcnFlag, :DcnStatus, :Cpu, :Memory, :Storage, :PayMode, :CreateTime, :PeriodEndTime, :InstanceType, :EncryptStatus, :DcnStatusDesc, :PolarisInstanceId, :PolarisInstanceName, :PolarisNamespace, :PolarisService, :PolarisServiceStatus, :PolarisServiceStatusDesc, :PolarisRegion, :IsDcnSwitchSupported
def initialize(instanceid=nil, instancename=nil, region=nil, zone=nil, vip=nil, vipv6=nil, vport=nil, status=nil, statusdesc=nil, dcnflag=nil, dcnstatus=nil, cpu=nil, memory=nil, storage=nil, paymode=nil, createtime=nil, periodendtime=nil, instancetype=nil, encryptstatus=nil, dcnstatusdesc=nil, polarisinstanceid=nil, polarisinstancename=nil, polarisnamespace=nil, polarisservice=nil, polarisservicestatus=nil, polarisservicestatusdesc=nil, polarisregion=nil, isdcnswitchsupported=nil)
@InstanceId = instanceid
@InstanceName = instancename
@Region = region
@Zone = zone
@Vip = vip
@Vipv6 = vipv6
@Vport = vport
@Status = status
@StatusDesc = statusdesc
@DcnFlag = dcnflag
@DcnStatus = dcnstatus
@Cpu = cpu
@Memory = memory
@Storage = storage
@PayMode = paymode
@CreateTime = createtime
@PeriodEndTime = periodendtime
@InstanceType = instancetype
@EncryptStatus = encryptstatus
@DcnStatusDesc = dcnstatusdesc
@PolarisInstanceId = polarisinstanceid
@PolarisInstanceName = polarisinstancename
@PolarisNamespace = polarisnamespace
@PolarisService = polarisservice
@PolarisServiceStatus = polarisservicestatus
@PolarisServiceStatusDesc = polarisservicestatusdesc
@PolarisRegion = polarisregion
@IsDcnSwitchSupported = isdcnswitchsupported
end
def deserialize(params)
@InstanceId = params['InstanceId']
@InstanceName = params['InstanceName']
@Region = params['Region']
@Zone = params['Zone']
@Vip = params['Vip']
@Vipv6 = params['Vipv6']
@Vport = params['Vport']
@Status = params['Status']
@StatusDesc = params['StatusDesc']
@DcnFlag = params['DcnFlag']
@DcnStatus = params['DcnStatus']
@Cpu = params['Cpu']
@Memory = params['Memory']
@Storage = params['Storage']
@PayMode = params['PayMode']
@CreateTime = params['CreateTime']
@PeriodEndTime = params['PeriodEndTime']
@InstanceType = params['InstanceType']
@EncryptStatus = params['EncryptStatus']
@DcnStatusDesc = params['DcnStatusDesc']
@PolarisInstanceId = params['PolarisInstanceId']
@PolarisInstanceName = params['PolarisInstanceName']
@PolarisNamespace = params['PolarisNamespace']
@PolarisService = params['PolarisService']
@PolarisServiceStatus = params['PolarisServiceStatus']
@PolarisServiceStatusDesc = params['PolarisServiceStatusDesc']
@PolarisRegion = params['PolarisRegion']
@IsDcnSwitchSupported = params['IsDcnSwitchSupported']
end
end
# 订单信息
class Deal < TencentCloud::Common::AbstractModel
# @param DealName: 订单号
# @type DealName: String
# @param OwnerUin: 所属账号
# @type OwnerUin: String
# @param Count: 商品数量
# @type Count: Integer
# @param FlowId: 关联的流程 Id，可用于查询流程执行状态
# @type FlowId: Integer
# @param InstanceIds: 只有创建实例且已完成发货的订单会填充该字段，表示该订单创建的实例的 ID
# 注意：此字段可能返回 null，表示取不到有效值。
# @type InstanceIds: Array
# @param PayMode: 付费模式，0后付费/1预付费
# @type PayMode: Integer
attr_accessor :DealName, :OwnerUin, :Count, :FlowId, :InstanceIds, :PayMode
def initialize(dealname=nil, owneruin=nil, count=nil, flowid=nil, instanceids=nil, paymode=nil)
@DealName = dealname
@OwnerUin = owneruin
@Count = count
@FlowId = flowid
@InstanceIds = instanceids
@PayMode = paymode
end
def deserialize(params)
@DealName = params['DealName']
@OwnerUin = params['OwnerUin']
@Count = params['Count']
@FlowId = params['FlowId']
@InstanceIds = params['InstanceIds']
@PayMode = params['PayMode']
end
end
# DeleteAccount请求参数结构体
class DeleteAccountRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID，形如：dcdbt-ow728lmc，可以通过 DescribeDCDBInstances 查询实例详情获得。
# @type InstanceId: String
# @param UserName: 用户名
# @type UserName: String
# @param Host: 用户允许的访问 host
# @type Host: String
attr_accessor :InstanceId, :UserName, :Host
def initialize(instanceid=nil, username=nil, host=nil)
@InstanceId = instanceid
@UserName = username
@Host = host
end
def deserialize(params)
@InstanceId = params['InstanceId']
@UserName = params['UserName']
@Host = params['Host']
end
end
# DeleteAccount返回参数结构体
class DeleteAccountResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DescribeAccountPrivileges请求参数结构体
class DescribeAccountPrivilegesRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例 ID，形如：dcdbt-ow7t8lmc。
# @type InstanceId: String
# @param UserName: 登录用户名。
# @type UserName: String
# @param Host: 用户允许的访问 host，用户名+host唯一确定一个账号。
# @type Host: String
# @param DbName: 数据库名。如果为 \*，表示查询全局权限（即 \*.\*），此时忽略 Type 和 Object 参数
# @type DbName: String
# @param Type: 类型,可以填入 table 、 view 、 proc 、 func 和 \*。当 DbName 为具体数据库名，Type为 \* 时，表示查询该数据库权限（即db.\*），此时忽略 Object 参数
# @type Type: String
# @param Object: 具体的 Type 的名称，例如 Type 为 table 时就是具体的表名。DbName 和 Type 都为具体名称，则 Object 表示具体对象名，不能为 \* 或者为空
# @type Object: String
# @param ColName: 当 Type=table 时，ColName 为 \* 表示查询表的权限，如果为具体字段名，表示查询对应字段的权限
# @type ColName: String
attr_accessor :InstanceId, :UserName, :Host, :DbName, :Type, :Object, :ColName
def initialize(instanceid=nil, username=nil, host=nil, dbname=nil, type=nil, object=nil, colname=nil)
@InstanceId = instanceid
@UserName = username
@Host = host
@DbName = dbname
@Type = type
@Object = object
@ColName = colname
end
def deserialize(params)
@InstanceId = params['InstanceId']
@UserName = params['UserName']
@Host = params['Host']
@DbName = params['DbName']
@Type = params['Type']
@Object = params['Object']
@ColName = params['ColName']
end
end
# DescribeAccountPrivileges返回参数结构体
class DescribeAccountPrivilegesResponse < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param Privileges: 权限列表。
# @type Privileges: Array
# @param UserName: 数据库账号用户名
# @type UserName: String
# @param Host: 数据库账号Host
# @type Host: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :InstanceId, :Privileges, :UserName, :Host, :RequestId
def initialize(instanceid=nil, privileges=nil, username=nil, host=nil, requestid=nil)
@InstanceId = instanceid
@Privileges = privileges
@UserName = username
@Host = host
@RequestId = requestid
end
def deserialize(params)
@InstanceId = params['InstanceId']
@Privileges = params['Privileges']
@UserName = params['UserName']
@Host = params['Host']
@RequestId = params['RequestId']
end
end
# DescribeAccounts请求参数结构体
class DescribeAccountsRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID，形如：dcdbt-ow728lmc。
# @type InstanceId: String
attr_accessor :InstanceId
def initialize(instanceid=nil)
@InstanceId = instanceid
end
def deserialize(params)
@InstanceId = params['InstanceId']
end
end
# DescribeAccounts返回参数结构体
class DescribeAccountsResponse < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID，透传入参。
# @type InstanceId: String
# @param Users: 实例用户列表。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Users: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :InstanceId, :Users, :RequestId
def initialize(instanceid=nil, users=nil, requestid=nil)
@InstanceId = instanceid
@Users = users
@RequestId = requestid
end
def deserialize(params)
@InstanceId = params['InstanceId']
unless params['Users'].nil?
@Users = []
params['Users'].each do |i|
dbaccount_tmp = DBAccount.new
dbaccount_tmp.deserialize(i)
@Users << dbaccount_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeBackupFiles请求参数结构体
class DescribeBackupFilesRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 按实例ID查询
# @type InstanceId: String
# @param ShardId: 按分片ID查询
# @type ShardId: String
# @param BackupType: 备份类型，Data:数据备份，Binlog:Binlog备份，Errlog:错误日志，Slowlog:慢日志
# @type BackupType: String
# @param StartTime: 按开始时间查询
# @type StartTime: String
# @param EndTime: 按结束时间查询
# @type EndTime: String
# @param Limit: 分页参数
# @type Limit: Integer
# @param Offset: 分页参数
# @type Offset: Integer
# @param OrderBy: 排序参数，可选值：Time,Size
# @type OrderBy: String
# @param OrderType: 排序参数，可选值：DESC,ASC
# @type OrderType: String
attr_accessor :InstanceId, :ShardId, :BackupType, :StartTime, :EndTime, :Limit, :Offset, :OrderBy, :OrderType
def initialize(instanceid=nil, shardid=nil, backuptype=nil, starttime=nil, endtime=nil, limit=nil, offset=nil, orderby=nil, ordertype=nil)
@InstanceId = instanceid
@ShardId = shardid
@BackupType = backuptype
@StartTime = starttime
@EndTime = endtime
@Limit = limit
@Offset = offset
@OrderBy = orderby
@OrderType = ordertype
end
def deserialize(params)
@InstanceId = params['InstanceId']
@ShardId = params['ShardId']
@BackupType = params['BackupType']
@StartTime = params['StartTime']
@EndTime = params['EndTime']
@Limit = params['Limit']
@Offset = params['Offset']
@OrderBy = params['OrderBy']
@OrderType = params['OrderType']
end
end
# DescribeBackupFiles返回参数结构体
class DescribeBackupFilesResponse < TencentCloud::Common::AbstractModel
# @param Files: 备份文件列表
# @type Files: Array
# @param TotalCount: 总条目数
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Files, :TotalCount, :RequestId
def initialize(files=nil, totalcount=nil, requestid=nil)
@Files = files
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['Files'].nil?
@Files = []
params['Files'].each do |i|
instancebackupfileitem_tmp = InstanceBackupFileItem.new
instancebackupfileitem_tmp.deserialize(i)
@Files << instancebackupfileitem_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeDBEncryptAttributes请求参数结构体
class DescribeDBEncryptAttributesRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例Id，形如：tdsqlshard-ow728lmc。
# @type InstanceId: String
attr_accessor :InstanceId
def initialize(instanceid=nil)
@InstanceId = instanceid
end
def deserialize(params)
@InstanceId = params['InstanceId']
end
end
# DescribeDBEncryptAttributes返回参数结构体
class DescribeDBEncryptAttributesResponse < TencentCloud::Common::AbstractModel
# @param EncryptStatus: 是否启用加密，1-已开启；0-未开启。
# @type EncryptStatus: Integer
# @param CipherText: DEK密钥
# @type CipherText: String
# @param ExpireDate: DEK密钥过期日期。
# @type ExpireDate: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :EncryptStatus, :CipherText, :ExpireDate, :RequestId
def initialize(encryptstatus=nil, ciphertext=nil, expiredate=nil, requestid=nil)
@EncryptStatus = encryptstatus
@CipherText = ciphertext
@ExpireDate = expiredate
@RequestId = requestid
end
def deserialize(params)
@EncryptStatus = params['EncryptStatus']
@CipherText = params['CipherText']
@ExpireDate = params['ExpireDate']
@RequestId = params['RequestId']
end
end
# DescribeDBLogFiles请求参数结构体
class DescribeDBLogFilesRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例 ID，形如：dcdbt-ow7t8lmc。
# @type InstanceId: String
# @param ShardId: 分片 ID，形如：shard-7noic7tv
# @type ShardId: String
# @param Type: 请求日志类型，取值只能为1、2、3或者4。1-binlog，2-冷备，3-errlog，4-slowlog。
# @type Type: Integer
attr_accessor :InstanceId, :ShardId, :Type
def initialize(instanceid=nil, shardid=nil, type=nil)
@InstanceId = instanceid
@ShardId = shardid
@Type = type
end
def deserialize(params)
@InstanceId = params['InstanceId']
@ShardId = params['ShardId']
@Type = params['Type']
end
end
# DescribeDBLogFiles返回参数结构体
class DescribeDBLogFilesResponse < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例 ID，形如：dcdbt-ow728lmc。
# @type InstanceId: String
# @param Type: 请求日志类型。1-binlog，2-冷备，3-errlog，4-slowlog。
# @type Type: Integer
# @param Total: 请求日志总数
# @type Total: Integer
# @param Files: 日志文件列表
# @type Files: Array
# @param VpcPrefix: 如果是VPC网络的实例，做用本前缀加上URI为下载地址
# @type VpcPrefix: String
# @param NormalPrefix: 如果是普通网络的实例，做用本前缀加上URI为下载地址
# @type NormalPrefix: String
# @param ShardId: 分片 ID，形如：shard-7noic7tv
# @type ShardId: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :InstanceId, :Type, :Total, :Files, :VpcPrefix, :NormalPrefix, :ShardId, :RequestId
def initialize(instanceid=nil, type=nil, total=nil, files=nil, vpcprefix=nil, normalprefix=nil, shardid=nil, requestid=nil)
@InstanceId = instanceid
@Type = type
@Total = total
@Files = files
@VpcPrefix = vpcprefix
@NormalPrefix = normalprefix
@ShardId = shardid
@RequestId = requestid
end
def deserialize(params)
@InstanceId = params['InstanceId']
@Type = params['Type']
@Total = params['Total']
unless params['Files'].nil?
@Files = []
params['Files'].each do |i|
logfileinfo_tmp = LogFileInfo.new
logfileinfo_tmp.deserialize(i)
@Files << logfileinfo_tmp
end
end
@VpcPrefix = params['VpcPrefix']
@NormalPrefix = params['NormalPrefix']
@ShardId = params['ShardId']
@RequestId = params['RequestId']
end
end
# DescribeDBParameters请求参数结构体
class DescribeDBParametersRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例 ID，形如：dcdbt-ow7t8lmc。
# @type InstanceId: String
attr_accessor :InstanceId
def initialize(instanceid=nil)
@InstanceId = instanceid
end
def deserialize(params)
@InstanceId = params['InstanceId']
end
end
# DescribeDBParameters返回参数结构体
class DescribeDBParametersResponse < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例 ID，形如：dcdbt-ow7t8lmc。
# @type InstanceId: String
# @param Params: 请求DB的当前参数值
# @type Params: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :InstanceId, :Params, :RequestId
def initialize(instanceid=nil, params=nil, requestid=nil)
@InstanceId = instanceid
@Params = params
@RequestId = requestid
end
def deserialize(params)
@InstanceId = params['InstanceId']
unless params['Params'].nil?
@Params = []
params['Params'].each do |i|
paramdesc_tmp = ParamDesc.new
paramdesc_tmp.deserialize(i)
@Params << paramdesc_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeDBSecurityGroups请求参数结构体
class DescribeDBSecurityGroupsRequest < TencentCloud::Common::AbstractModel
# @param Product: 数据库引擎名称，本接口取值：dcdb。
# @type Product: String
# @param InstanceId: 实例ID。
# @type InstanceId: String
attr_accessor :Product, :InstanceId
def initialize(product=nil, instanceid=nil)
@Product = product
@InstanceId = instanceid
end
def deserialize(params)
@Product = params['Product']
@InstanceId = params['InstanceId']
end
end
# DescribeDBSecurityGroups返回参数结构体
class DescribeDBSecurityGroupsResponse < TencentCloud::Common::AbstractModel
# @param Groups: 安全组详情。
# @type Groups: Array
# @param VIP: 实例VIP
# 注意：此字段可能返回 null，表示取不到有效值。
# @type VIP: String
# @param VPort: 实例端口
# 注意：此字段可能返回 null，表示取不到有效值。
# @type VPort: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Groups, :VIP, :VPort, :RequestId
def initialize(groups=nil, vip=nil, vport=nil, requestid=nil)
@Groups = groups
@VIP = vip
@VPort = vport
@RequestId = requestid
end
def deserialize(params)
unless params['Groups'].nil?
@Groups = []
params['Groups'].each do |i|
securitygroup_tmp = SecurityGroup.new
securitygroup_tmp.deserialize(i)
@Groups << securitygroup_tmp
end
end
@VIP = params['VIP']
@VPort = params['VPort']
@RequestId = params['RequestId']
end
end
# DescribeDBSlowLogs请求参数结构体
class DescribeDBSlowLogsRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例 ID，形如：dcdbt-hw0qj6m1
# @type InstanceId: String
# @param Offset: 从结果的第几条数据开始返回
# @type Offset: Integer
# @param Limit: 返回的结果条数
# @type Limit: Integer
# @param StartTime: 查询的起始时间，形如2016-07-23 14:55:20
# @type StartTime: String
# @param ShardId: 实例的分片ID，形如shard-53ima8ln
# @type ShardId: String
# @param EndTime: 查询的结束时间，形如2016-08-22 14:55:20。如果不填，那么查询结束时间就是当前时间
# @type EndTime: String
# @param Db: 要查询的具体数据库名称
# @type Db: String
# @param OrderBy: 排序指标，取值为query_time_sum或者query_count。不填默认按照query_time_sum排序
# @type OrderBy: String
# @param OrderByType: 排序类型，desc（降序）或者asc（升序）。不填默认desc排序
# @type OrderByType: String
# @param Slave: 是否查询从机的慢查询，0-主机; 1-从机。不填默认查询主机慢查询
# @type Slave: Integer
attr_accessor :InstanceId, :Offset, :Limit, :StartTime, :ShardId, :EndTime, :Db, :OrderBy, :OrderByType, :Slave
def initialize(instanceid=nil, offset=nil, limit=nil, starttime=nil, shardid=nil, endtime=nil, db=nil, orderby=nil, orderbytype=nil, slave=nil)
@InstanceId = instanceid
@Offset = offset
@Limit = limit
@StartTime = starttime
@ShardId = shardid
@EndTime = endtime
@Db = db
@OrderBy = orderby
@OrderByType = orderbytype
@Slave = slave
end
def deserialize(params)
@InstanceId = params['InstanceId']
@Offset = params['Offset']
@Limit = params['Limit']
@StartTime = params['StartTime']
@ShardId = params['ShardId']
@EndTime = params['EndTime']
@Db = params['Db']
@OrderBy = params['OrderBy']
@OrderByType = params['OrderByType']
@Slave = params['Slave']
end
end
# DescribeDBSlowLogs返回参数结构体
class DescribeDBSlowLogsResponse < TencentCloud::Common::AbstractModel
# @param LockTimeSum: 所有语句锁时间总和
# @type LockTimeSum: Float
# @param QueryCount: 所有语句查询总次数
# @type QueryCount: Integer
# @param Total: 总记录数
# @type Total: Integer
# @param QueryTimeSum: 所有语句查询时间总和
# @type QueryTimeSum: Float
# @param Data: 慢查询日志数据
# @type Data: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :LockTimeSum, :QueryCount, :Total, :QueryTimeSum, :Data, :RequestId
def initialize(locktimesum=nil, querycount=nil, total=nil, querytimesum=nil, data=nil, requestid=nil)
@LockTimeSum = locktimesum
@QueryCount = querycount
@Total = total
@QueryTimeSum = querytimesum
@Data = data
@RequestId = requestid
end
def deserialize(params)
@LockTimeSum = params['LockTimeSum']
@QueryCount = params['QueryCount']
@Total = params['Total']
@QueryTimeSum = params['QueryTimeSum']
unless params['Data'].nil?
@Data = []
params['Data'].each do |i|
slowlogdata_tmp = SlowLogData.new
slowlogdata_tmp.deserialize(i)
@Data << slowlogdata_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeDBSyncMode请求参数结构体
class DescribeDBSyncModeRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 待修改同步模式的实例ID。形如：dcdbt-ow728lmc。
# @type InstanceId: String
attr_accessor :InstanceId
def initialize(instanceid=nil)
@InstanceId = instanceid
end
def deserialize(params)
@InstanceId = params['InstanceId']
end
end
# DescribeDBSyncMode返回参数结构体
class DescribeDBSyncModeResponse < TencentCloud::Common::AbstractModel
# @param SyncMode: 同步模式：0 异步，1 强同步， 2 强同步可退化
# @type SyncMode: Integer
# @param IsModifying: 是否有修改流程在执行中：1 是， 0 否。
# @type IsModifying: Integer
# @param CurrentSyncMode: 当前复制方式，0 异步，1 同步
# @type CurrentSyncMode: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :SyncMode, :IsModifying, :CurrentSyncMode, :RequestId
def initialize(syncmode=nil, ismodifying=nil, currentsyncmode=nil, requestid=nil)
@SyncMode = syncmode
@IsModifying = ismodifying
@CurrentSyncMode = currentsyncmode
@RequestId = requestid
end
def deserialize(params)
@SyncMode = params['SyncMode']
@IsModifying = params['IsModifying']
@CurrentSyncMode = params['CurrentSyncMode']
@RequestId = params['RequestId']
end
end
# DescribeDBTmpInstances请求参数结构体
class DescribeDBTmpInstancesRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
attr_accessor :InstanceId
def initialize(instanceid=nil)
@InstanceId = instanceid
end
def deserialize(params)
@InstanceId = params['InstanceId']
end
end
# DescribeDBTmpInstances返回参数结构体
class DescribeDBTmpInstancesResponse < TencentCloud::Common::AbstractModel
# @param TmpInstances: 临时实例列表
# @type TmpInstances: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TmpInstances, :RequestId
def initialize(tmpinstances=nil, requestid=nil)
@TmpInstances = tmpinstances
@RequestId = requestid
end
def deserialize(params)
unless params['TmpInstances'].nil?
@TmpInstances = []
params['TmpInstances'].each do |i|
tmpinstance_tmp = TmpInstance.new
tmpinstance_tmp.deserialize(i)
@TmpInstances << tmpinstance_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeDCDBInstanceDetail请求参数结构体
class DescribeDCDBInstanceDetailRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID，形如dcdbt-7oaxtcb7
# @type InstanceId: String
attr_accessor :InstanceId
def initialize(instanceid=nil)
@InstanceId = instanceid
end
def deserialize(params)
@InstanceId = params['InstanceId']
end
end
# DescribeDCDBInstanceDetail返回参数结构体
class DescribeDCDBInstanceDetailResponse < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID，形如dcdbt-7oaxtcb7
# @type InstanceId: String
# @param InstanceName: 实例名称
# @type InstanceName: String
# @param Status: 实例状态。0-实例创建中；1-异步任务处理中；2-运行中；3-实例未初始化；-1-实例已隔离
# @type Status: Integer
# @param StatusDesc: 实例目前运行状态描述
# @type StatusDesc: String
# @param Vip: 实例内网IP地址
# @type Vip: String
# @param Vport: 实例内网端口
# @type Vport: Integer
# @param NodeCount: 实例节点数。值为2时表示一主一从，值为3时表示一主二从
# @type NodeCount: Integer
# @param Region: 实例所在地域名称，形如ap-guangzhou
# @type Region: String
# @param VpcId: 实例私有网络ID，形如vpc-r9jr0de3
# @type VpcId: String
# @param SubnetId: 实例私有网络子网ID，形如subnet-6rqs61o2
# @type SubnetId: String
# @param WanStatus: 外网状态，0-未开通；1-已开通；2-关闭；3-开通中；4-关闭中
# @type WanStatus: Integer
# @param WanDomain: 外网访问的域名，公网可解析
# @type WanDomain: String
# @param WanVip: 外网IP地址，公网可访问
# @type WanVip: String
# @param WanPort: 外网访问端口
# @type WanPort: Integer
# @param ProjectId: 实例所属项目ID
# @type ProjectId: Integer
# @param AutoRenewFlag: 实例自动续费标志。0-正常续费；1-自动续费；2-到期不续费
# @type AutoRenewFlag: Integer
# @param ExclusterId: 独享集群ID
# @type ExclusterId: String
# @param PayMode: 付费模式。prepaid-预付费；postpaid-按量计费
# @type PayMode: String
# @param CreateTime: 实例创建时间，格式为 2006-01-02 15:04:05
# @type CreateTime: String
# @param PeriodEndTime: 实例到期时间，格式为 2006-01-02 15:04:05
# @type PeriodEndTime: String
# @param DbVersion: 数据库版本信息
# @type DbVersion: String
# @param IsAuditSupported: 实例是否支持审计。0-不支持；1-支持
# @type IsAuditSupported: Integer
# @param IsEncryptSupported: 实例是否支持数据加密。0-不支持；1-支持
# @type IsEncryptSupported: Integer
# @param Machine: 实例母机机器型号
# @type Machine: String
# @param Memory: 实例内存大小，单位 GB，各个分片的内存大小的和
# @type Memory: Integer
# @param Storage: 实例磁盘存储大小，单位 GB，各个分片的磁盘大小的和
# @type Storage: Integer
# @param StorageUsage: 实例存储空间使用率，计算方式为：各个分片已经使用的磁盘大小的和/各个分片的磁盘大小的和。
# @type StorageUsage: Float
# @param LogStorage: 日志存储空间大小，单位GB
# @type LogStorage: Integer
# @param Pid: 产品类型ID
# @type Pid: Integer
# @param MasterZone: 主DB可用区
# @type MasterZone: String
# @param SlaveZones: 从DB可用区
# @type SlaveZones: Array
# @param Shards: 分片信息
# @type Shards: Array
# @param Vip6: 内网IPv6
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Vip6: String
# @param Cpu: 实例Cpu核数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Cpu: Integer
# @param Qps: 实例QPS
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Qps: Integer
# @param DbEngine: DB引擎
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DbEngine: String
# @param Ipv6Flag: 是否支持IPv6
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Ipv6Flag: Integer
# @param WanVipv6: 外网IPv6地址，公网可访问
# 注意：此字段可能返回 null，表示取不到有效值。
# @type WanVipv6: String
# @param WanStatusIpv6: 外网状态，0-未开通；1-已开通；2-关闭；3-开通中；4-关闭中
# 注意：此字段可能返回 null，表示取不到有效值。
# @type WanStatusIpv6: Integer
# @param WanPortIpv6: 外网IPv6端口
# 注意：此字段可能返回 null，表示取不到有效值。
# @type WanPortIpv6: Integer
# @param ResourceTags: 标签信息
# @type ResourceTags: Array
# @param DcnFlag: DCN标志，0-无，1-主实例，2-灾备实例
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DcnFlag: Integer
# @param DcnStatus: DCN状态，0-无，1-创建中，2-同步中，3-已断开
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DcnStatus: Integer
# @param DcnDstNum: DCN灾备实例数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DcnDstNum: Integer
# @param InstanceType: 1： 主实例（独享型）, 2: 主实例, 3： 灾备实例, 4： 灾备实例（独享型）
# 注意：此字段可能返回 null，表示取不到有效值。
# @type InstanceType: Integer
# @param IsMaxUserConnectionsSupported: 实例是否支持设置用户连接数限制，内核为10.1暂不支持。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IsMaxUserConnectionsSupported: Boolean
# @param DbVersionId: 对外显示的数据库版本
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DbVersionId: String
# @param EncryptStatus: 加密状态, 0-未开启，1-已开启
# 注意：此字段可能返回 null，表示取不到有效值。
# @type EncryptStatus: Integer
# @param ExclusterType: 独享集群类型，0:公有云, 1:金融围笼, 2:CDC集群
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ExclusterType: Integer
# @param RsAccessStrategy: VPC就近访问
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RsAccessStrategy: Integer
# @param ReservedNetResources: 尚未回收的网络资源
# @type ReservedNetResources: Array
# @param IsPhysicalReplicationSupported: 是否支持物理复制
# @type IsPhysicalReplicationSupported: Boolean
# @param IsDcnStrongSyncSupported: 是否支持强同步DCN
# @type IsDcnStrongSyncSupported: Integer
# @param IsDcnSwitchSupported: 是否支持DCN切换
# @type IsDcnSwitchSupported: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :InstanceId, :InstanceName, :Status, :StatusDesc, :Vip, :Vport, :NodeCount, :Region, :VpcId, :SubnetId, :WanStatus, :WanDomain, :WanVip, :WanPort, :ProjectId, :AutoRenewFlag, :ExclusterId, :PayMode, :CreateTime, :PeriodEndTime, :DbVersion, :IsAuditSupported, :IsEncryptSupported, :Machine, :Memory, :Storage, :StorageUsage, :LogStorage, :Pid, :MasterZone, :SlaveZones, :Shards, :Vip6, :Cpu, :Qps, :DbEngine, :Ipv6Flag, :WanVipv6, :WanStatusIpv6, :WanPortIpv6, :ResourceTags, :DcnFlag, :DcnStatus, :DcnDstNum, :InstanceType, :IsMaxUserConnectionsSupported, :DbVersionId, :EncryptStatus, :ExclusterType, :RsAccessStrategy, :ReservedNetResources, :IsPhysicalReplicationSupported, :IsDcnStrongSyncSupported, :IsDcnSwitchSupported, :RequestId
def initialize(instanceid=nil, instancename=nil, status=nil, statusdesc=nil, vip=nil, vport=nil, nodecount=nil, region=nil, vpcid=nil, subnetid=nil, wanstatus=nil, wandomain=nil, wanvip=nil, wanport=nil, projectid=nil, autorenewflag=nil, exclusterid=nil, paymode=nil, createtime=nil, periodendtime=nil, dbversion=nil, isauditsupported=nil, isencryptsupported=nil, machine=nil, memory=nil, storage=nil, storageusage=nil, logstorage=nil, pid=nil, masterzone=nil, slavezones=nil, shards=nil, vip6=nil, cpu=nil, qps=nil, dbengine=nil, ipv6flag=nil, wanvipv6=nil, wanstatusipv6=nil, wanportipv6=nil, resourcetags=nil, dcnflag=nil, dcnstatus=nil, dcndstnum=nil, instancetype=nil, ismaxuserconnectionssupported=nil, dbversionid=nil, encryptstatus=nil, exclustertype=nil, rsaccessstrategy=nil, reservednetresources=nil, isphysicalreplicationsupported=nil, isdcnstrongsyncsupported=nil, isdcnswitchsupported=nil, requestid=nil)
@InstanceId = instanceid
@InstanceName = instancename
@Status = status
@StatusDesc = statusdesc
@Vip = vip
@Vport = vport
@NodeCount = nodecount
@Region = region
@VpcId = vpcid
@SubnetId = subnetid
@WanStatus = wanstatus
@WanDomain = wandomain
@WanVip = wanvip
@WanPort = wanport
@ProjectId = projectid
@AutoRenewFlag = autorenewflag
@ExclusterId = exclusterid
@PayMode = paymode
@CreateTime = createtime
@PeriodEndTime = periodendtime
@DbVersion = dbversion
@IsAuditSupported = isauditsupported
@IsEncryptSupported = isencryptsupported
@Machine = machine
@Memory = memory
@Storage = storage
@StorageUsage = storageusage
@LogStorage = logstorage
@Pid = pid
@MasterZone = masterzone
@SlaveZones = slavezones
@Shards = shards
@Vip6 = vip6
@Cpu = cpu
@Qps = qps
@DbEngine = dbengine
@Ipv6Flag = ipv6flag
@WanVipv6 = wanvipv6
@WanStatusIpv6 = wanstatusipv6
@WanPortIpv6 = wanportipv6
@ResourceTags = resourcetags
@DcnFlag = dcnflag
@DcnStatus = dcnstatus
@DcnDstNum = dcndstnum
@InstanceType = instancetype
@IsMaxUserConnectionsSupported = ismaxuserconnectionssupported
@DbVersionId = dbversionid
@EncryptStatus = encryptstatus
@ExclusterType = exclustertype
@RsAccessStrategy = rsaccessstrategy
@ReservedNetResources = reservednetresources
@IsPhysicalReplicationSupported = isphysicalreplicationsupported
@IsDcnStrongSyncSupported = isdcnstrongsyncsupported
@IsDcnSwitchSupported = isdcnswitchsupported
@RequestId = requestid
end
def deserialize(params)
@InstanceId = params['InstanceId']
@InstanceName = params['InstanceName']
@Status = params['Status']
@StatusDesc = params['StatusDesc']
@Vip = params['Vip']
@Vport = params['Vport']
@NodeCount = params['NodeCount']
@Region = params['Region']
@VpcId = params['VpcId']
@SubnetId = params['SubnetId']
@WanStatus = params['WanStatus']
@WanDomain = params['WanDomain']
@WanVip = params['WanVip']
@WanPort = params['WanPort']
@ProjectId = params['ProjectId']
@AutoRenewFlag = params['AutoRenewFlag']
@ExclusterId = params['ExclusterId']
@PayMode = params['PayMode']
@CreateTime = params['CreateTime']
@PeriodEndTime = params['PeriodEndTime']
@DbVersion = params['DbVersion']
@IsAuditSupported = params['IsAuditSupported']
@IsEncryptSupported = params['IsEncryptSupported']
@Machine = params['Machine']
@Memory = params['Memory']
@Storage = params['Storage']
@StorageUsage = params['StorageUsage']
@LogStorage = params['LogStorage']
@Pid = params['Pid']
@MasterZone = params['MasterZone']
@SlaveZones = params['SlaveZones']
unless params['Shards'].nil?
@Shards = []
params['Shards'].each do |i|
shardbriefinfo_tmp = ShardBriefInfo.new
shardbriefinfo_tmp.deserialize(i)
@Shards << shardbriefinfo_tmp
end
end
@Vip6 = params['Vip6']
@Cpu = params['Cpu']
@Qps = params['Qps']
@DbEngine = params['DbEngine']
@Ipv6Flag = params['Ipv6Flag']
@WanVipv6 = params['WanVipv6']
@WanStatusIpv6 = params['WanStatusIpv6']
@WanPortIpv6 = params['WanPortIpv6']
unless params['ResourceTags'].nil?
@ResourceTags = []
params['ResourceTags'].each do |i|
resourcetag_tmp = ResourceTag.new
resourcetag_tmp.deserialize(i)
@ResourceTags << resourcetag_tmp
end
end
@DcnFlag = params['DcnFlag']
@DcnStatus = params['DcnStatus']
@DcnDstNum = params['DcnDstNum']
@InstanceType = params['InstanceType']
@IsMaxUserConnectionsSupported = params['IsMaxUserConnectionsSupported']
@DbVersionId = params['DbVersionId']
@EncryptStatus = params['EncryptStatus']
@ExclusterType = params['ExclusterType']
@RsAccessStrategy = params['RsAccessStrategy']
unless params['ReservedNetResources'].nil?
@ReservedNetResources = []
params['ReservedNetResources'].each do |i|
reservednetresource_tmp = ReservedNetResource.new
reservednetresource_tmp.deserialize(i)
@ReservedNetResources << reservednetresource_tmp
end
end
@IsPhysicalReplicationSupported = params['IsPhysicalReplicationSupported']
@IsDcnStrongSyncSupported = params['IsDcnStrongSyncSupported']
@IsDcnSwitchSupported = params['IsDcnSwitchSupported']
@RequestId = params['RequestId']
end
end
# DescribeDCDBInstanceNodeInfo请求参数结构体
class DescribeDCDBInstanceNodeInfoRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param Limit: 单次最多返回多少条，取值范围为(0-100]，默认为100
# @type Limit: Integer
# @param Offset: 返回数据的偏移值，默认为0
# @type Offset: Integer
attr_accessor :InstanceId, :Limit, :Offset
def initialize(instanceid=nil, limit=nil, offset=nil)
@InstanceId = instanceid
@Limit = limit
@Offset = offset
end
def deserialize(params)
@InstanceId = params['InstanceId']
@Limit = params['Limit']
@Offset = params['Offset']
end
end
# DescribeDCDBInstanceNodeInfo返回参数结构体
class DescribeDCDBInstanceNodeInfoResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 节点总个数
# @type TotalCount: Integer
# @param NodesInfo: 节点信息
# @type NodesInfo: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :NodesInfo, :RequestId
def initialize(totalcount=nil, nodesinfo=nil, requestid=nil)
@TotalCount = totalcount
@NodesInfo = nodesinfo
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['NodesInfo'].nil?
@NodesInfo = []
params['NodesInfo'].each do |i|
briefnodeinfo_tmp = BriefNodeInfo.new
briefnodeinfo_tmp.deserialize(i)
@NodesInfo << briefnodeinfo_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeDCDBInstances请求参数结构体
class DescribeDCDBInstancesRequest < TencentCloud::Common::AbstractModel
# @param InstanceIds: 按照一个或者多个实例 ID 查询。实例 ID 形如：dcdbt-2t4cf98d
# @type InstanceIds: Array
# @param SearchName: 搜索的字段名，当前支持的值有：instancename、vip、all。传 instancename 表示按实例名进行搜索；传 vip 表示按内网IP进行搜索；传 all 将会按实例ID、实例名和内网IP进行搜索。
# @type SearchName: String
# @param SearchKey: 搜索的关键字，支持模糊搜索。多个关键字使用换行符（'\n'）分割。
# @type SearchKey: String
# @param ProjectIds: 按项目 ID 查询
# @type ProjectIds: Array
# @param IsFilterVpc: 是否根据 VPC 网络来搜索
# @type IsFilterVpc: Boolean
# @param VpcId: 私有网络 ID， IsFilterVpc 为 1 时有效
# @type VpcId: String
# @param SubnetId: 私有网络的子网 ID， IsFilterVpc 为 1 时有效
# @type SubnetId: String
# @param OrderBy: 排序字段， projectId， createtime， instancename 三者之一
# @type OrderBy: String
# @param OrderByType: 排序类型， desc 或者 asc
# @type OrderByType: String
# @param Offset: 偏移量，默认为 0
# @type Offset: Integer
# @param Limit: 返回数量，默认为 10，最大值为 100。
# @type Limit: Integer
# @param ExclusterType: 1非独享集群，2独享集群， 0全部
# @type ExclusterType: Integer
# @param IsFilterExcluster: 标识是否使用ExclusterType字段, false不使用，true使用
# @type IsFilterExcluster: Boolean
# @param ExclusterIds: 独享集群ID
# @type ExclusterIds: Array
# @param TagKeys: 按标签key查询
# @type TagKeys: Array
# @param FilterInstanceType: 实例类型过滤，1-独享实例，2-主实例，3-灾备实例，多个按逗号分隔
# @type FilterInstanceType: String
# @param Status: 按实例状态筛选
# @type Status: Array
# @param ExcludeStatus: 排除实例状态
# @type ExcludeStatus: Array
attr_accessor :InstanceIds, :SearchName, :SearchKey, :ProjectIds, :IsFilterVpc, :VpcId, :SubnetId, :OrderBy, :OrderByType, :Offset, :Limit, :ExclusterType, :IsFilterExcluster, :ExclusterIds, :TagKeys, :FilterInstanceType, :Status, :ExcludeStatus
def initialize(instanceids=nil, searchname=nil, searchkey=nil, projectids=nil, isfiltervpc=nil, vpcid=nil, subnetid=nil, orderby=nil, orderbytype=nil, offset=nil, limit=nil, exclustertype=nil, isfilterexcluster=nil, exclusterids=nil, tagkeys=nil, filterinstancetype=nil, status=nil, excludestatus=nil)
@InstanceIds = instanceids
@SearchName = searchname
@SearchKey = searchkey
@ProjectIds = projectids
@IsFilterVpc = isfiltervpc
@VpcId = vpcid
@SubnetId = subnetid
@OrderBy = orderby
@OrderByType = orderbytype
@Offset = offset
@Limit = limit
@ExclusterType = exclustertype
@IsFilterExcluster = isfilterexcluster
@ExclusterIds = exclusterids
@TagKeys = tagkeys
@FilterInstanceType = filterinstancetype
@Status = status
@ExcludeStatus = excludestatus
end
def deserialize(params)
@InstanceIds = params['InstanceIds']
@SearchName = params['SearchName']
@SearchKey = params['SearchKey']
@ProjectIds = params['ProjectIds']
@IsFilterVpc = params['IsFilterVpc']
@VpcId = params['VpcId']
@SubnetId = params['SubnetId']
@OrderBy = params['OrderBy']
@OrderByType = params['OrderByType']
@Offset = params['Offset']
@Limit = params['Limit']
@ExclusterType = params['ExclusterType']
@IsFilterExcluster = params['IsFilterExcluster']
@ExclusterIds = params['ExclusterIds']
@TagKeys = params['TagKeys']
@FilterInstanceType = params['FilterInstanceType']
@Status = params['Status']
@ExcludeStatus = params['ExcludeStatus']
end
end
# DescribeDCDBInstances返回参数结构体
class DescribeDCDBInstancesResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 符合条件的实例数量
# @type TotalCount: Integer
# @param Instances: 实例详细信息列表
# @type Instances: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :Instances, :RequestId
def initialize(totalcount=nil, instances=nil, requestid=nil)
@TotalCount = totalcount
@Instances = instances
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['Instances'].nil?
@Instances = []
params['Instances'].each do |i|
dcdbinstanceinfo_tmp = DCDBInstanceInfo.new
dcdbinstanceinfo_tmp.deserialize(i)
@Instances << dcdbinstanceinfo_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeDCDBPrice请求参数结构体
class DescribeDCDBPriceRequest < TencentCloud::Common::AbstractModel
# @param Zone: 欲新购实例的可用区ID。
# @type Zone: String
# @param Count: 欲购买实例的数量，目前支持购买1-10个实例
# @type Count: Integer
# @param Period: 欲购买的时长，单位：月。
# @type Period: Integer
# @param ShardNodeCount: 单个分片节点个数大小，可以通过 DescribeShardSpec
# 查询实例规格获得。
# @type ShardNodeCount: Integer
# @param ShardMemory: 分片内存大小，单位：GB，可以通过 DescribeShardSpec
# 查询实例规格获得。
# @type ShardMemory: Integer
# @param ShardStorage: 分片存储空间大小，单位：GB，可以通过 DescribeShardSpec
# 查询实例规格获得。
# @type ShardStorage: Integer
# @param ShardCount: 实例分片个数，可选范围2-8，可以通过升级实例进行新增分片到最多64个分片。
# @type ShardCount: Integer
# @param Paymode: 付费类型。postpaid：按量付费 prepaid：预付费
# @type Paymode: String
# @param AmountUnit: 价格金额单位，不传默认单位为分，取值：
# * pent：分
# * microPent：微分
# @type AmountUnit: String
attr_accessor :Zone, :Count, :Period, :ShardNodeCount, :ShardMemory, :ShardStorage, :ShardCount, :Paymode, :AmountUnit
def initialize(zone=nil, count=nil, period=nil, shardnodecount=nil, shardmemory=nil, shardstorage=nil, shardcount=nil, paymode=nil, amountunit=nil)
@Zone = zone
@Count = count
@Period = period
@ShardNodeCount = shardnodecount
@ShardMemory = shardmemory
@ShardStorage = shardstorage
@ShardCount = shardcount
@Paymode = paymode
@AmountUnit = amountunit
end
def deserialize(params)
@Zone = params['Zone']
@Count = params['Count']
@Period = params['Period']
@ShardNodeCount = params['ShardNodeCount']
@ShardMemory = params['ShardMemory']
@ShardStorage = params['ShardStorage']
@ShardCount = params['ShardCount']
@Paymode = params['Paymode']
@AmountUnit = params['AmountUnit']
end
end
# DescribeDCDBPrice返回参数结构体
class DescribeDCDBPriceResponse < TencentCloud::Common::AbstractModel
# @param OriginalPrice: 原价
# * 单位：默认为分，若请求参数带有AmountUnit，参考AmountUnit描述
# * 币种：国内站为人民币，国际站为美元
# @type OriginalPrice: Integer
# @param Price: 实际价格，受折扣等影响，可能和原价不同
# * 单位：默认为分，若请求参数带有AmountUnit，参考AmountUnit描述
# * 币种：国内站人民币，国际站美元
# @type Price: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :OriginalPrice, :Price, :RequestId
def initialize(originalprice=nil, price=nil, requestid=nil)
@OriginalPrice = originalprice
@Price = price
@RequestId = requestid
end
def deserialize(params)
@OriginalPrice = params['OriginalPrice']
@Price = params['Price']
@RequestId = params['RequestId']
end
end
# DescribeDCDBRenewalPrice请求参数结构体
class DescribeDCDBRenewalPriceRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 待续费的实例ID。形如：dcdbt-ow728lmc，可以通过 DescribeDCDBInstances 查询实例详情获得。
# @type InstanceId: String
# @param Period: 续费时长，单位：月。不传则默认为1个月。
# @type Period: Integer
# @param AmountUnit: 价格金额单位，不传默认单位为分，取值：
# * pent：分
# * microPent：微分
# @type AmountUnit: String
attr_accessor :InstanceId, :Period, :AmountUnit
def initialize(instanceid=nil, period=nil, amountunit=nil)
@InstanceId = instanceid
@Period = period
@AmountUnit = amountunit
end
def deserialize(params)
@InstanceId = params['InstanceId']
@Period = params['Period']
@AmountUnit = params['AmountUnit']
end
end
# DescribeDCDBRenewalPrice返回参数结构体
class DescribeDCDBRenewalPriceResponse < TencentCloud::Common::AbstractModel
# @param OriginalPrice: 原价
# * 单位：默认为分，若请求参数带有AmountUnit，参考AmountUnit描述
# * 币种：国内站为人民币，国际站为美元
# @type OriginalPrice: Integer
# @param Price: 实际价格，受折扣等影响，可能和原价不同
# * 单位：默认为分，若请求参数带有AmountUnit，参考AmountUnit描述
# * 币种：国内站人民币，国际站美元
# @type Price: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :OriginalPrice, :Price, :RequestId
def initialize(originalprice=nil, price=nil, requestid=nil)
@OriginalPrice = originalprice
@Price = price
@RequestId = requestid
end
def deserialize(params)
@OriginalPrice = params['OriginalPrice']
@Price = params['Price']
@RequestId = params['RequestId']
end
end
# DescribeDCDBSaleInfo请求参数结构体
class DescribeDCDBSaleInfoRequest < TencentCloud::Common::AbstractModel
def initialize()
end
def deserialize(params)
end
end
# DescribeDCDBSaleInfo返回参数结构体
class DescribeDCDBSaleInfoResponse < TencentCloud::Common::AbstractModel
# @param RegionList: 可售卖地域信息列表
# @type RegionList: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RegionList, :RequestId
def initialize(regionlist=nil, requestid=nil)
@RegionList = regionlist
@RequestId = requestid
end
def deserialize(params)
unless params['RegionList'].nil?
@RegionList = []
params['RegionList'].each do |i|
regioninfo_tmp = RegionInfo.new
regioninfo_tmp.deserialize(i)
@RegionList << regioninfo_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeDCDBShards请求参数结构体
class DescribeDCDBShardsRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID，形如：dcdbt-ow728lmc。
# @type InstanceId: String
# @param ShardInstanceIds: 分片ID列表。
# @type ShardInstanceIds: Array
# @param Offset: 偏移量，默认为 0
# @type Offset: Integer
# @param Limit: 返回数量，默认为 20，最大值为 100。
# @type Limit: Integer
# @param OrderBy: 排序字段， 目前仅支持 createtime
# @type OrderBy: String
# @param OrderByType: 排序类型， desc 或者 asc
# @type OrderByType: String
attr_accessor :InstanceId, :ShardInstanceIds, :Offset, :Limit, :OrderBy, :OrderByType
def initialize(instanceid=nil, shardinstanceids=nil, offset=nil, limit=nil, orderby=nil, orderbytype=nil)
@InstanceId = instanceid
@ShardInstanceIds = shardinstanceids
@Offset = offset
@Limit = limit
@OrderBy = orderby
@OrderByType = orderbytype
end
def deserialize(params)
@InstanceId = params['InstanceId']
@ShardInstanceIds = params['ShardInstanceIds']
@Offset = params['Offset']
@Limit = params['Limit']
@OrderBy = params['OrderBy']
@OrderByType = params['OrderByType']
end
end
# DescribeDCDBShards返回参数结构体
class DescribeDCDBShardsResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 符合条件的分片数量
# @type TotalCount: Integer
# @param Shards: 分片信息列表
# @type Shards: Array
# @param DcnFlag: 灾备标志，0-无，1-主实例，2-灾备实例
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DcnFlag: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :Shards, :DcnFlag, :RequestId
def initialize(totalcount=nil, shards=nil, dcnflag=nil, requestid=nil)
@TotalCount = totalcount
@Shards = shards
@DcnFlag = dcnflag
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['Shards'].nil?
@Shards = []
params['Shards'].each do |i|
dcdbshardinfo_tmp = DCDBShardInfo.new
dcdbshardinfo_tmp.deserialize(i)
@Shards << dcdbshardinfo_tmp
end
end
@DcnFlag = params['DcnFlag']
@RequestId = params['RequestId']
end
end
# DescribeDCDBUpgradePrice请求参数结构体
class DescribeDCDBUpgradePriceRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 待升级的实例ID。形如：dcdbt-ow728lmc，可以通过 DescribeDCDBInstances 查询实例详情获得。
# @type InstanceId: String
# @param UpgradeType: 升级类型，取值范围:
# <li> ADD: 新增分片 </li>
# <li> EXPAND: 升级实例中的已有分片 </li>
# <li> SPLIT: 将已有分片中的数据切分到新增分片上</li>
# @type UpgradeType: String
# @param AddShardConfig: 新增分片配置，当UpgradeType为ADD时生效。
# @type AddShardConfig: :class:`Tencentcloud::Dcdb.v20180411.models.AddShardConfig`
# @param ExpandShardConfig: 扩容分片配置，当UpgradeType为EXPAND时生效。
# @type ExpandShardConfig: :class:`Tencentcloud::Dcdb.v20180411.models.ExpandShardConfig`
# @param SplitShardConfig: 切分分片配置，当UpgradeType为SPLIT时生效。
# @type SplitShardConfig: :class:`Tencentcloud::Dcdb.v20180411.models.SplitShardConfig`
# @param AmountUnit: 价格金额单位，不传默认单位为分，取值：
# * pent：分
# * microPent：微分
# @type AmountUnit: String
attr_accessor :InstanceId, :UpgradeType, :AddShardConfig, :ExpandShardConfig, :SplitShardConfig, :AmountUnit
def initialize(instanceid=nil, upgradetype=nil, addshardconfig=nil, expandshardconfig=nil, splitshardconfig=nil, amountunit=nil)
@InstanceId = instanceid
@UpgradeType = upgradetype
@AddShardConfig = addshardconfig
@ExpandShardConfig = expandshardconfig
@SplitShardConfig = splitshardconfig
@AmountUnit = amountunit
end
def deserialize(params)
@InstanceId = params['InstanceId']
@UpgradeType = params['UpgradeType']
unless params['AddShardConfig'].nil?
@AddShardConfig = AddShardConfig.new
@AddShardConfig.deserialize(params['AddShardConfig'])
end
unless params['ExpandShardConfig'].nil?
@ExpandShardConfig = ExpandShardConfig.new
@ExpandShardConfig.deserialize(params['ExpandShardConfig'])
end
unless params['SplitShardConfig'].nil?
@SplitShardConfig = SplitShardConfig.new
@SplitShardConfig.deserialize(params['SplitShardConfig'])
end
@AmountUnit = params['AmountUnit']
end
end
# DescribeDCDBUpgradePrice返回参数结构体
class DescribeDCDBUpgradePriceResponse < TencentCloud::Common::AbstractModel
# @param OriginalPrice: 原价
# * 单位：默认为分，若请求参数带有AmountUnit，参考AmountUnit描述
# * 币种：国内站为人民币，国际站为美元
# @type OriginalPrice: Integer
# @param Price: 实际价格，受折扣等影响，可能和原价不同
# * 单位：默认为分，若请求参数带有AmountUnit，参考AmountUnit描述
# * 币种：国内站人民币，国际站美元
# @type Price: Integer
# @param Formula: 变配明细计算公式
# @type Formula: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :OriginalPrice, :Price, :Formula, :RequestId
def initialize(originalprice=nil, price=nil, formula=nil, requestid=nil)
@OriginalPrice = originalprice
@Price = price
@Formula = formula
@RequestId = requestid
end
def deserialize(params)
@OriginalPrice = params['OriginalPrice']
@Price = params['Price']
@Formula = params['Formula']
@RequestId = params['RequestId']
end
end
# DescribeDatabaseObjects请求参数结构体
class DescribeDatabaseObjectsRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例 ID，形如：dcdbt-ow7t8lmc。
# @type InstanceId: String
# @param DbName: 数据库名称，通过 DescribeDatabases 接口获取。
# @type DbName: String
attr_accessor :InstanceId, :DbName
def initialize(instanceid=nil, dbname=nil)
@InstanceId = instanceid
@DbName = dbname
end
def deserialize(params)
@InstanceId = params['InstanceId']
@DbName = params['DbName']
end
end
# DescribeDatabaseObjects返回参数结构体
class DescribeDatabaseObjectsResponse < TencentCloud::Common::AbstractModel
# @param InstanceId: 透传入参。
# @type InstanceId: String
# @param DbName: 数据库名称。
# @type DbName: String
# @param Tables: 表列表。
# @type Tables: Array
# @param Views: 视图列表。
# @type Views: Array
# @param Procs: 存储过程列表。
# @type Procs: Array
# @param Funcs: 函数列表。
# @type Funcs: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :InstanceId, :DbName, :Tables, :Views, :Procs, :Funcs, :RequestId
def initialize(instanceid=nil, dbname=nil, tables=nil, views=nil, procs=nil, funcs=nil, requestid=nil)
@InstanceId = instanceid
@DbName = dbname
@Tables = tables
@Views = views
@Procs = procs
@Funcs = funcs
@RequestId = requestid
end
def deserialize(params)
@InstanceId = params['InstanceId']
@DbName = params['DbName']
unless params['Tables'].nil?
@Tables = []
params['Tables'].each do |i|
databasetable_tmp = DatabaseTable.new
databasetable_tmp.deserialize(i)
@Tables << databasetable_tmp
end
end
unless params['Views'].nil?
@Views = []
params['Views'].each do |i|
databaseview_tmp = DatabaseView.new
databaseview_tmp.deserialize(i)
@Views << databaseview_tmp
end
end
unless params['Procs'].nil?
@Procs = []
params['Procs'].each do |i|
databaseprocedure_tmp = DatabaseProcedure.new
databaseprocedure_tmp.deserialize(i)
@Procs << databaseprocedure_tmp
end
end
unless params['Funcs'].nil?
@Funcs = []
params['Funcs'].each do |i|
databasefunction_tmp = DatabaseFunction.new
databasefunction_tmp.deserialize(i)
@Funcs << databasefunction_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeDatabaseTable请求参数结构体
class DescribeDatabaseTableRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例 ID，形如：dcdbt-ow7t8lmc。
# @type InstanceId: String
# @param DbName: 数据库名称，通过 DescribeDatabases 接口获取。
# @type DbName: String
# @param Table: 表名称，通过 DescribeDatabaseObjects 接口获取。
# @type Table: String
attr_accessor :InstanceId, :DbName, :Table
def initialize(instanceid=nil, dbname=nil, table=nil)
@InstanceId = instanceid
@DbName = dbname
@Table = table
end
def deserialize(params)
@InstanceId = params['InstanceId']
@DbName = params['DbName']
@Table = params['Table']
end
end
# DescribeDatabaseTable返回参数结构体
class DescribeDatabaseTableResponse < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例名称。
# @type InstanceId: String
# @param DbName: 数据库名称。
# @type DbName: String
# @param Table: 表名称。
# @type Table: String
# @param Cols: 列信息。
# @type Cols: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :InstanceId, :DbName, :Table, :Cols, :RequestId
def initialize(instanceid=nil, dbname=nil, table=nil, cols=nil, requestid=nil)
@InstanceId = instanceid
@DbName = dbname
@Table = table
@Cols = cols
@RequestId = requestid
end
def deserialize(params)
@InstanceId = params['InstanceId']
@DbName = params['DbName']
@Table = params['Table']
unless params['Cols'].nil?
@Cols = []
params['Cols'].each do |i|
tablecolumn_tmp = TableColumn.new
tablecolumn_tmp.deserialize(i)
@Cols << tablecolumn_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeDatabases请求参数结构体
class DescribeDatabasesRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例 ID，形如：dcdbt-ow7t8lmc。
# @type InstanceId: String
attr_accessor :InstanceId
def initialize(instanceid=nil)
@InstanceId = instanceid
end
def deserialize(params)
@InstanceId = params['InstanceId']
end
end
# DescribeDatabases返回参数结构体
class DescribeDatabasesResponse < TencentCloud::Common::AbstractModel
# @param Databases: 该实例上的数据库列表。
# @type Databases: Array
# @param InstanceId: 透传入参。
# @type InstanceId: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Databases, :InstanceId, :RequestId
def initialize(databases=nil, instanceid=nil, requestid=nil)
@Databases = databases
@InstanceId = instanceid
@RequestId = requestid
end
def deserialize(params)
unless params['Databases'].nil?
@Databases = []
params['Databases'].each do |i|
database_tmp = Database.new
database_tmp.deserialize(i)
@Databases << database_tmp
end
end
@InstanceId = params['InstanceId']
@RequestId = params['RequestId']
end
end
# DescribeDcnDetail请求参数结构体
class DescribeDcnDetailRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
attr_accessor :InstanceId
def initialize(instanceid=nil)
@InstanceId = instanceid
end
def deserialize(params)
@InstanceId = params['InstanceId']
end
end
# DescribeDcnDetail返回参数结构体
class DescribeDcnDetailResponse < TencentCloud::Common::AbstractModel
# @param DcnDetails: DCN同步详情
# @type DcnDetails: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :DcnDetails, :RequestId
def initialize(dcndetails=nil, requestid=nil)
@DcnDetails = dcndetails
@RequestId = requestid
end
def deserialize(params)
unless params['DcnDetails'].nil?
@DcnDetails = []
params['DcnDetails'].each do |i|
dcndetailitem_tmp = DcnDetailItem.new
dcndetailitem_tmp.deserialize(i)
@DcnDetails << dcndetailitem_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeFileDownloadUrl请求参数结构体
class DescribeFileDownloadUrlRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param ShardId: 实例分片ID
# @type ShardId: String
# @param FilePath: 不带签名的文件路径
# @type FilePath: String
attr_accessor :InstanceId, :ShardId, :FilePath
def initialize(instanceid=nil, shardid=nil, filepath=nil)
@InstanceId = instanceid
@ShardId = shardid
@FilePath = filepath
end
def deserialize(params)
@InstanceId = params['InstanceId']
@ShardId = params['ShardId']
@FilePath = params['FilePath']
end
end
# DescribeFileDownloadUrl返回参数结构体
class DescribeFileDownloadUrlResponse < TencentCloud::Common::AbstractModel
# @param PreSignedUrl: 带签名的下载连接
# @type PreSignedUrl: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :PreSignedUrl, :RequestId
def initialize(presignedurl=nil, requestid=nil)
@PreSignedUrl = presignedurl
@RequestId = requestid
end
def deserialize(params)
@PreSignedUrl = params['PreSignedUrl']
@RequestId = params['RequestId']
end
end
# DescribeFlow请求参数结构体
class DescribeFlowRequest < TencentCloud::Common::AbstractModel
# @param FlowId: 异步请求接口返回的任务流程号。
# @type FlowId: Integer
attr_accessor :FlowId
def initialize(flowid=nil)
@FlowId = flowid
end
def deserialize(params)
@FlowId = params['FlowId']
end
end
# DescribeFlow返回参数结构体
class DescribeFlowResponse < TencentCloud::Common::AbstractModel
# @param Status: 流程状态，0：成功，1：失败，2：运行中
# @type Status: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Status, :RequestId
def initialize(status=nil, requestid=nil)
@Status = status
@RequestId = requestid
end
def deserialize(params)
@Status = params['Status']
@RequestId = params['RequestId']
end
end
# DescribeLogFileRetentionPeriod请求参数结构体
class DescribeLogFileRetentionPeriodRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例 ID，形如：tdsql-ow728lmc。
# @type InstanceId: String
attr_accessor :InstanceId
def initialize(instanceid=nil)
@InstanceId = instanceid
end
def deserialize(params)
@InstanceId = params['InstanceId']
end
end
# DescribeLogFileRetentionPeriod返回参数结构体
class DescribeLogFileRetentionPeriodResponse < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例 ID，形如：tdsql-ow728lmc。
# @type InstanceId: String
# @param Days: 日志备份天数
# @type Days: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :InstanceId, :Days, :RequestId
def initialize(instanceid=nil, days=nil, requestid=nil)
@InstanceId = instanceid
@Days = days
@RequestId = requestid
end
def deserialize(params)
@InstanceId = params['InstanceId']
@Days = params['Days']
@RequestId = params['RequestId']
end
end
# DescribeOrders请求参数结构体
class DescribeOrdersRequest < TencentCloud::Common::AbstractModel
# @param DealNames: 待查询的长订单号列表，创建实例、续费实例、扩容实例接口返回。
# @type DealNames: Array
attr_accessor :DealNames
def initialize(dealnames=nil)
@DealNames = dealnames
end
def deserialize(params)
@DealNames = params['DealNames']
end
end
# DescribeOrders返回参数结构体
class DescribeOrdersResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 返回的订单数量。
# @type TotalCount: Integer
# @param Deals: 订单信息列表。
# @type Deals: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :Deals, :RequestId
def initialize(totalcount=nil, deals=nil, requestid=nil)
@TotalCount = totalcount
@Deals = deals
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['Deals'].nil?
@Deals = []
params['Deals'].each do |i|
deal_tmp = Deal.new
deal_tmp.deserialize(i)
@Deals << deal_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeProjectSecurityGroups请求参数结构体
class DescribeProjectSecurityGroupsRequest < TencentCloud::Common::AbstractModel
# @param Product: 数据库引擎名称，本接口取值：dcdb。
# @type Product: String
# @param ProjectId: 项目ID。
# @type ProjectId: Integer
attr_accessor :Product, :ProjectId
def initialize(product=nil, projectid=nil)
@Product = product
@ProjectId = projectid
end
def deserialize(params)
@Product = params['Product']
@ProjectId = params['ProjectId']
end
end
# DescribeProjectSecurityGroups返回参数结构体
class DescribeProjectSecurityGroupsResponse < TencentCloud::Common::AbstractModel
# @param Groups: 安全组详情。
# @type Groups: Array
# @param Total: 安全组个数。
# @type Total: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Groups, :Total, :RequestId
def initialize(groups=nil, total=nil, requestid=nil)
@Groups = groups
@Total = total
@RequestId = requestid
end
def deserialize(params)
unless params['Groups'].nil?
@Groups = []
params['Groups'].each do |i|
securitygroup_tmp = SecurityGroup.new
securitygroup_tmp.deserialize(i)
@Groups << securitygroup_tmp
end
end
@Total = params['Total']
@RequestId = params['RequestId']
end
end
# DescribeProjects请求参数结构体
class DescribeProjectsRequest < TencentCloud::Common::AbstractModel
def initialize()
end
def deserialize(params)
end
end
# DescribeProjects返回参数结构体
class DescribeProjectsResponse < TencentCloud::Common::AbstractModel
# @param Projects: 项目列表
# @type Projects: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Projects, :RequestId
def initialize(projects=nil, requestid=nil)
@Projects = projects
@RequestId = requestid
end
def deserialize(params)
unless params['Projects'].nil?
@Projects = []
params['Projects'].each do |i|
project_tmp = Project.new
project_tmp.deserialize(i)
@Projects << project_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeShardSpec请求参数结构体
class DescribeShardSpecRequest < TencentCloud::Common::AbstractModel
def initialize()
end
def deserialize(params)
end
end
# DescribeShardSpec返回参数结构体
class DescribeShardSpecResponse < TencentCloud::Common::AbstractModel
# @param SpecConfig: 按机型分类的可售卖规格列表
# @type SpecConfig: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :SpecConfig, :RequestId
def initialize(specconfig=nil, requestid=nil)
@SpecConfig = specconfig
@RequestId = requestid
end
def deserialize(params)
unless params['SpecConfig'].nil?
@SpecConfig = []
params['SpecConfig'].each do |i|
specconfig_tmp = SpecConfig.new
specconfig_tmp.deserialize(i)
@SpecConfig << specconfig_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeUserTasks请求参数结构体
class DescribeUserTasksRequest < TencentCloud::Common::AbstractModel
# @param Statuses: 任务的状态列表。0-任务启动中；1-任务运行中；2-任务成功；3-任务失败
# @type Statuses: Array
# @param InstanceIds: 实例ID列表
# @type InstanceIds: Array
# @param FlowTypes: 任务类型列表，当前支持的任务类型有：0-回档任务；1-创建实例任务；2-扩容任务；3-迁移任务；4-删除实例任务；5-重启任务
# @type FlowTypes: Array
# @param StartTime: 任务的创建时间
# @type StartTime: String
# @param EndTime: 任务的结束时间
# @type EndTime: String
# @param UTaskIds: 任务ID的数组
# @type UTaskIds: Array
# @param Limit: 每次最多返回多少条任务，取值范围为(0,100]，不传的话默认值为20
# @type Limit: Integer
# @param Offset: 返回任务默认是按照创建时间降序排列，从偏移值Offset处开始返回
# @type Offset: Integer
attr_accessor :Statuses, :InstanceIds, :FlowTypes, :StartTime, :EndTime, :UTaskIds, :Limit, :Offset
def initialize(statuses=nil, instanceids=nil, flowtypes=nil, starttime=nil, endtime=nil, utaskids=nil, limit=nil, offset=nil)
@Statuses = statuses
@InstanceIds = instanceids
@FlowTypes = flowtypes
@StartTime = starttime
@EndTime = endtime
@UTaskIds = utaskids
@Limit = limit
@Offset = offset
end
def deserialize(params)
@Statuses = params['Statuses']
@InstanceIds = params['InstanceIds']
@FlowTypes = params['FlowTypes']
@StartTime = params['StartTime']
@EndTime = params['EndTime']
@UTaskIds = params['UTaskIds']
@Limit = params['Limit']
@Offset = params['Offset']
end
end
# DescribeUserTasks返回参数结构体
class DescribeUserTasksResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 任务总数
# @type TotalCount: Integer
# @param FlowSet: 任务列表
# @type FlowSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :FlowSet, :RequestId
def initialize(totalcount=nil, flowset=nil, requestid=nil)
@TotalCount = totalcount
@FlowSet = flowset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['FlowSet'].nil?
@FlowSet = []
params['FlowSet'].each do |i|
usertaskinfo_tmp = UserTaskInfo.new
usertaskinfo_tmp.deserialize(i)
@FlowSet << usertaskinfo_tmp
end
end
@RequestId = params['RequestId']
end
end
# DestroyDCDBInstance请求参数结构体
class DestroyDCDBInstanceRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例 ID，格式如：tdsqlshard-c1nl9rpv，与云数据库控制台页面中显示的实例 ID 相同。
# @type InstanceId: String
attr_accessor :InstanceId
def initialize(instanceid=nil)
@InstanceId = instanceid
end
def deserialize(params)
@InstanceId = params['InstanceId']
end
end
# DestroyDCDBInstance返回参数结构体
class DestroyDCDBInstanceResponse < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例 ID，与入参InstanceId一致。
# @type InstanceId: String
# @param FlowId: 异步任务的请求 ID，可使用此 ID [查询异步任务的执行结果](https://cloud.tencent.com/document/product/557/56485)。
# @type FlowId: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :InstanceId, :FlowId, :RequestId
def initialize(instanceid=nil, flowid=nil, requestid=nil)
@InstanceId = instanceid
@FlowId = flowid
@RequestId = requestid
end
def deserialize(params)
@InstanceId = params['InstanceId']
@FlowId = params['FlowId']
@RequestId = params['RequestId']
end
end
# DestroyHourDCDBInstance请求参数结构体
class DestroyHourDCDBInstanceRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例 ID，格式如：tdsqlshard-c1nl9rpv，与云数据库控制台页面中显示的实例 ID 相同。
# @type InstanceId: String
attr_accessor :InstanceId
def initialize(instanceid=nil)
@InstanceId = instanceid
end
def deserialize(params)
@InstanceId = params['InstanceId']
end
end
# DestroyHourDCDBInstance返回参数结构体
class DestroyHourDCDBInstanceResponse < TencentCloud::Common::AbstractModel
# @param FlowId: 异步任务的请求 ID，可使用此 ID [查询异步任务的执行结果](https://cloud.tencent.com/document/product/557/56485)。
# @type FlowId: Integer
# @param InstanceId: 实例 ID，与入参InstanceId一致。
# @type InstanceId: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :FlowId, :InstanceId, :RequestId
def initialize(flowid=nil, instanceid=nil, requestid=nil)
@FlowId = flowid
@InstanceId = instanceid
@RequestId = requestid
end
def deserialize(params)
@FlowId = params['FlowId']
@InstanceId = params['InstanceId']
@RequestId = params['RequestId']
end
end
# DisassociateSecurityGroups请求参数结构体
class DisassociateSecurityGroupsRequest < TencentCloud::Common::AbstractModel
# @param Product: 数据库引擎名称，本接口取值：dcdb。
# @type Product: String
# @param SecurityGroupId: 安全组Id。
# @type SecurityGroupId: String
# @param InstanceIds: 实例ID列表，一个或者多个实例Id组成的数组。
# @type InstanceIds: Array
attr_accessor :Product, :SecurityGroupId, :InstanceIds
def initialize(product=nil, securitygroupid=nil, instanceids=nil)
@Product = product
@SecurityGroupId = securitygroupid
@InstanceIds = instanceids
end
def deserialize(params)
@Product = params['Product']
@SecurityGroupId = params['SecurityGroupId']
@InstanceIds = params['InstanceIds']
end
end
# DisassociateSecurityGroups返回参数结构体
class DisassociateSecurityGroupsResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# 升级实例 -- 扩容分片类型
class ExpandShardConfig < TencentCloud::Common::AbstractModel
# @param ShardInstanceIds: 分片ID数组
# @type ShardInstanceIds: Array
# @param ShardMemory: 分片内存大小，单位 GB
# @type ShardMemory: Integer
# @param ShardStorage: 分片存储大小，单位 GB
# @type ShardStorage: Integer
# @param ShardNodeCount: 分片节点数
# @type ShardNodeCount: Integer
attr_accessor :ShardInstanceIds, :ShardMemory, :ShardStorage, :ShardNodeCount
def initialize(shardinstanceids=nil, shardmemory=nil, shardstorage=nil, shardnodecount=nil)
@ShardInstanceIds = shardinstanceids
@ShardMemory = shardmemory
@ShardStorage = shardstorage
@ShardNodeCount = shardnodecount
end
def deserialize(params)
@ShardInstanceIds = params['ShardInstanceIds']
@ShardMemory = params['ShardMemory']
@ShardStorage = params['ShardStorage']
@ShardNodeCount = params['ShardNodeCount']
end
end
# FlushBinlog请求参数结构体
class FlushBinlogRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
attr_accessor :InstanceId
def initialize(instanceid=nil)
@InstanceId = instanceid
end
def deserialize(params)
@InstanceId = params['InstanceId']
end
end
# FlushBinlog返回参数结构体
class FlushBinlogResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# GrantAccountPrivileges请求参数结构体
class GrantAccountPrivilegesRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例 ID，形如：dcdbt-ow728lmc。
# @type InstanceId: String
# @param UserName: 登录用户名。
# @type UserName: String
# @param Host: 用户允许的访问 host，用户名+host唯一确定一个账号。
# @type Host: String
# @param DbName: 数据库名。如果为 \*，表示查询全局权限（即 \*.\*），此时忽略 Type 和 Object 参数
# @type DbName: String
# @param Privileges: 全局权限： SELECT，INSERT，UPDATE，DELETE，CREATE，DROP，REFERENCES，INDEX，ALTER，CREATE TEMPORARY TABLES，LOCK TABLES，EXECUTE，CREATE VIEW，SHOW VIEW，CREATE ROUTINE，ALTER ROUTINE，EVENT，TRIGGER，SHOW DATABASES，REPLICATION CLIENT，REPLICATION SLAVE
# 库权限： SELECT，INSERT，UPDATE，DELETE，CREATE，DROP，REFERENCES，INDEX，ALTER，CREATE TEMPORARY TABLES，LOCK TABLES，EXECUTE，CREATE VIEW，SHOW VIEW，CREATE ROUTINE，ALTER ROUTINE，EVENT，TRIGGER
# 表权限： SELECT，INSERT，UPDATE，DELETE，CREATE，DROP，REFERENCES，INDEX，ALTER，CREATE VIEW，SHOW VIEW，TRIGGER
# 字段权限： INSERT，REFERENCES，SELECT，UPDATE
# @type Privileges: Array
# @param Type: 类型,可以填入 table 和 \*。当 DbName 为具体数据库名，Type为 \* 时，表示设置该数据库权限（即db.\*），此时忽略 Object 参数
# @type Type: String
# @param Object: 具体的 Type 的名称，例如 Type 为 table 时就是具体的表名。DbName 和 Type 都为具体名称，则 Object 表示具体对象名，不能为 \* 或者为空
# @type Object: String
# @param ColName: 当 Type=table 时，ColName 为 \* 表示对表授权，如果为具体字段名，表示对字段授权
# @type ColName: String
attr_accessor :InstanceId, :UserName, :Host, :DbName, :Privileges, :Type, :Object, :ColName
def initialize(instanceid=nil, username=nil, host=nil, dbname=nil, privileges=nil, type=nil, object=nil, colname=nil)
@InstanceId = instanceid
@UserName = username
@Host = host
@DbName = dbname
@Privileges = privileges
@Type = type
@Object = object
@ColName = colname
end
def deserialize(params)
@InstanceId = params['InstanceId']
@UserName = params['UserName']
@Host = params['Host']
@DbName = params['DbName']
@Privileges = params['Privileges']
@Type = params['Type']
@Object = params['Object']
@ColName = params['ColName']
end
end
# GrantAccountPrivileges返回参数结构体
class GrantAccountPrivilegesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# InitDCDBInstances请求参数结构体
class InitDCDBInstancesRequest < TencentCloud::Common::AbstractModel
# @param InstanceIds: 待初始化的实例ID列表，形如：dcdbt-ow728lmc，可以通过 DescribeDCDBInstances 查询实例详情获得。
# @type InstanceIds: Array
# @param Params: 参数列表。本接口的可选值为：character_set_server（字符集，必传），lower_case_table_names（表名大小写敏感，必传，0 - 敏感；1-不敏感），innodb_page_size（innodb数据页，默认16K），sync_mode（同步模式：0 - 异步； 1 - 强同步；2 - 强同步可退化。默认为强同步）。
# @type Params: Array
attr_accessor :InstanceIds, :Params
def initialize(instanceids=nil, params=nil)
@InstanceIds = instanceids
@Params = params
end
def deserialize(params)
@InstanceIds = params['InstanceIds']
unless params['Params'].nil?
@Params = []
params['Params'].each do |i|
dbparamvalue_tmp = DBParamValue.new
dbparamvalue_tmp.deserialize(i)
@Params << dbparamvalue_tmp
end
end
end
end
# InitDCDBInstances返回参数结构体
class InitDCDBInstancesResponse < TencentCloud::Common::AbstractModel
# @param FlowIds: 异步任务ID，可通过 DescribeFlow 查询任务状态。
# @type FlowIds: Array
# @param InstanceIds: 透传入参。
# @type InstanceIds: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :FlowIds, :InstanceIds, :RequestId
def initialize(flowids=nil, instanceids=nil, requestid=nil)
@FlowIds = flowids
@InstanceIds = instanceids
@RequestId = requestid
end
def deserialize(params)
@FlowIds = params['FlowIds']
@InstanceIds = params['InstanceIds']
@RequestId = params['RequestId']
end
end
# 实例备份文件信息
class InstanceBackupFileItem < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param InstanceName: 实例名称
# @type InstanceName: String
# @param InstanceStatus: 实例状态
# @type InstanceStatus: Integer
# @param ShardId: 分片ID
# @type ShardId: String
# @param FilePath: 文件路径
# @type FilePath: String
# @param FileName: 文件名
# @type FileName: String
# @param FileSize: 文件大小
# @type FileSize: Integer
# @param BackupType: 备份类型，Data:数据备份，Binlog:Binlog备份，Errlog:错误日志，Slowlog:慢日志
# @type BackupType: String
# @param ManualBackup: 手动备份，0:否，1:是
# @type ManualBackup: Integer
# @param StartTime: 备份开始时间
# @type StartTime: String
# @param EndTime: 备份结束时间
# @type EndTime: String
attr_accessor :InstanceId, :InstanceName, :InstanceStatus, :ShardId, :FilePath, :FileName, :FileSize, :BackupType, :ManualBackup, :StartTime, :EndTime
def initialize(instanceid=nil, instancename=nil, instancestatus=nil, shardid=nil, filepath=nil, filename=nil, filesize=nil, backuptype=nil, manualbackup=nil, starttime=nil, endtime=nil)
@InstanceId = instanceid
@InstanceName = instancename
@InstanceStatus = instancestatus
@ShardId = shardid
@FilePath = filepath
@FileName = filename
@FileSize = filesize
@BackupType = backuptype
@ManualBackup = manualbackup
@StartTime = starttime
@EndTime = endtime
end
def deserialize(params)
@InstanceId = params['InstanceId']
@InstanceName = params['InstanceName']
@InstanceStatus = params['InstanceStatus']
@ShardId = params['ShardId']
@FilePath = params['FilePath']
@FileName = params['FileName']
@FileSize = params['FileSize']
@BackupType = params['BackupType']
@ManualBackup = params['ManualBackup']
@StartTime = params['StartTime']
@EndTime = params['EndTime']
end
end
# IsolateDCDBInstance请求参数结构体
class IsolateDCDBInstanceRequest < TencentCloud::Common::AbstractModel
# @param InstanceIds: 实例 ID，格式如：tdsqlshard-avw0207d，与云数据库控制台页面中显示的实例 ID 相同，可使用 查询实例列表 接口获取，其值为输出参数中字段 InstanceId 的值。
# @type InstanceIds: Array
attr_accessor :InstanceIds
def initialize(instanceids=nil)
@InstanceIds = instanceids
end
def deserialize(params)
@InstanceIds = params['InstanceIds']
end
end
# IsolateDCDBInstance返回参数结构体
class IsolateDCDBInstanceResponse < TencentCloud::Common::AbstractModel
# @param SuccessInstanceIds: 隔离成功实例ID列表。
# @type SuccessInstanceIds: Array
# @param FailedInstanceIds: 隔离失败实例ID列表。
# @type FailedInstanceIds: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :SuccessInstanceIds, :FailedInstanceIds, :RequestId
def initialize(successinstanceids=nil, failedinstanceids=nil, requestid=nil)
@SuccessInstanceIds = successinstanceids
@FailedInstanceIds = failedinstanceids
@RequestId = requestid
end
def deserialize(params)
@SuccessInstanceIds = params['SuccessInstanceIds']
@FailedInstanceIds = params['FailedInstanceIds']
@RequestId = params['RequestId']
end
end
# IsolateDedicatedDBInstance请求参数结构体
class IsolateDedicatedDBInstanceRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例 Id，形如：dcdbt-ow728lmc。
# @type InstanceId: String
attr_accessor :InstanceId
def initialize(instanceid=nil)
@InstanceId = instanceid
end
def deserialize(params)
@InstanceId = params['InstanceId']
end
end
# IsolateDedicatedDBInstance返回参数结构体
class IsolateDedicatedDBInstanceResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# IsolateHourDCDBInstance请求参数结构体
class IsolateHourDCDBInstanceRequest < TencentCloud::Common::AbstractModel
# @param InstanceIds: 待升级的实例ID列表。形如：["dcdbt-ow728lmc"]，可以通过 DescribeDCDBInstances 查询实例详情获得。
# @type InstanceIds: Array
attr_accessor :InstanceIds
def initialize(instanceids=nil)
@InstanceIds = instanceids
end
def deserialize(params)
@InstanceIds = params['InstanceIds']
end
end
# IsolateHourDCDBInstance返回参数结构体
class IsolateHourDCDBInstanceResponse < TencentCloud::Common::AbstractModel
# @param SuccessInstanceIds: 隔离成功的实例id列表
# @type SuccessInstanceIds: Array
# @param FailedInstanceIds: 隔离失败的实例id列表
# @type FailedInstanceIds: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :SuccessInstanceIds, :FailedInstanceIds, :RequestId
def initialize(successinstanceids=nil, failedinstanceids=nil, requestid=nil)
@SuccessInstanceIds = successinstanceids
@FailedInstanceIds = failedinstanceids
@RequestId = requestid
end
def deserialize(params)
@SuccessInstanceIds = params['SuccessInstanceIds']
@FailedInstanceIds = params['FailedInstanceIds']
@RequestId = params['RequestId']
end
end
# KillSession请求参数结构体
class KillSessionRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param SessionId: 会话ID列表
# @type SessionId: Array
# @param ShardId: 分片ID，与ShardSerialId设置一个
# @type ShardId: String
# @param ShardSerialId: 分片序列ID，与ShardId设置一个
# @type ShardSerialId: String
attr_accessor :InstanceId, :SessionId, :ShardId, :ShardSerialId
def initialize(instanceid=nil, sessionid=nil, shardid=nil, shardserialid=nil)
@InstanceId = instanceid
@SessionId = sessionid
@ShardId = shardid
@ShardSerialId = shardserialid
end
def deserialize(params)
@InstanceId = params['InstanceId']
@SessionId = params['SessionId']
@ShardId = params['ShardId']
@ShardSerialId = params['ShardSerialId']
end
end
# KillSession返回参数结构体
class KillSessionResponse < TencentCloud::Common::AbstractModel
# @param TaskId: 任务ID
# @type TaskId: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TaskId, :RequestId
def initialize(taskid=nil, requestid=nil)
@TaskId = taskid
@RequestId = requestid
end
def deserialize(params)
@TaskId = params['TaskId']
@RequestId = params['RequestId']
end
end
# 拉取的日志信息
class LogFileInfo < TencentCloud::Common::AbstractModel
# @param Mtime: Log最后修改时间
# @type Mtime: Integer
# @param Length: 文件长度
# @type Length: Integer
# @param Uri: 下载Log时用到的统一资源标识符
# @type Uri: String
# @param FileName: 文件名
# @type FileName: String
attr_accessor :Mtime, :Length, :Uri, :FileName
def initialize(mtime=nil, length=nil, uri=nil, filename=nil)
@Mtime = mtime
@Length = length
@Uri = uri
@FileName = filename
end
def deserialize(params)
@Mtime = params['Mtime']
@Length = params['Length']
@Uri = params['Uri']
@FileName = params['FileName']
end
end
# ModifyAccountConfig请求参数结构体
class ModifyAccountConfigRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例 ID，格式如：tdsqlshard-kpkvq5oj，与云数据库控制台页面中显示的实例 ID 相同。
# @type InstanceId: String
# @param UserName: 账号的名称
# @type UserName: String
# @param Host: 账号的域名
# @type Host: String
# @param Configs: 配置列表，每一个元素是Config和Value的组合
# @type Configs: Array
attr_accessor :InstanceId, :UserName, :Host, :Configs
def initialize(instanceid=nil, username=nil, host=nil, configs=nil)
@InstanceId = instanceid
@UserName = username
@Host = host
@Configs = configs
end
def deserialize(params)
@InstanceId = params['InstanceId']
@UserName = params['UserName']
@Host = params['Host']
unless params['Configs'].nil?
@Configs = []
params['Configs'].each do |i|
configvalue_tmp = ConfigValue.new
configvalue_tmp.deserialize(i)
@Configs << configvalue_tmp
end
end
end
end
# ModifyAccountConfig返回参数结构体
class ModifyAccountConfigResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyAccountDescription请求参数结构体
class ModifyAccountDescriptionRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例 ID，形如：dcdbt-ow728lmc。
# @type InstanceId: String
# @param UserName: 登录用户名。
# @type UserName: String
# @param Host: 用户允许的访问 host，用户名+host唯一确定一个账号。
# @type Host: String
# @param Description: 新的账号备注，长度 0~256。
# @type Description: String
attr_accessor :InstanceId, :UserName, :Host, :Description
def initialize(instanceid=nil, username=nil, host=nil, description=nil)
@InstanceId = instanceid
@UserName = username
@Host = host
@Description = description
end
def deserialize(params)
@InstanceId = params['InstanceId']
@UserName = params['UserName']
@Host = params['Host']
@Description = params['Description']
end
end
# ModifyAccountDescription返回参数结构体
class ModifyAccountDescriptionResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyAccountPrivileges请求参数结构体
class ModifyAccountPrivilegesRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例 ID，格式如：tdsql-c1nl9rpv，与云数据库控制台页面中显示的实例 ID 相同。
# @type InstanceId: String
# @param Accounts: 数据库的账号，包括用户名和域名。
# @type Accounts: Array
# @param GlobalPrivileges: 全局权限。其中，GlobalPrivileges 中权限的可选值为："SELECT","INSERT","UPDATE","DELETE","CREATE", "PROCESS", "DROP","REFERENCES","INDEX","ALTER","SHOW DATABASES","CREATE TEMPORARY TABLES","LOCK TABLES","EXECUTE","CREATE VIEW","SHOW VIEW","CREATE ROUTINE","ALTER ROUTINE","EVENT","TRIGGER"。
# 注意，不传该参数表示保留现有权限，如需清除，该字段传空数组。
# @type GlobalPrivileges: Array
# @param DatabasePrivileges: 数据库的权限。Privileges 权限的可选值为："SELECT","INSERT","UPDATE","DELETE","CREATE", "DROP","REFERENCES","INDEX","ALTER","CREATE TEMPORARY TABLES","LOCK TABLES","EXECUTE","CREATE VIEW","SHOW VIEW","CREATE ROUTINE","ALTER ROUTINE","EVENT","TRIGGER"。
# 注意，不传该参数表示保留现有权限，如需清除，请在复杂类型Privileges字段传空数组。
# @type DatabasePrivileges: Array
# @param TablePrivileges: 数据库中表的权限。Privileges 权限的可选值为："SELECT","INSERT","UPDATE","DELETE","CREATE", "DROP","REFERENCES","INDEX","ALTER","CREATE VIEW","SHOW VIEW", "TRIGGER"。
# 注意，不传该参数表示保留现有权限，如需清除，请在复杂类型Privileges字段传空数组。
# @type TablePrivileges: Array
# @param ColumnPrivileges: 数据库表中列的权限。Privileges 权限的可选值为："SELECT","INSERT","UPDATE","REFERENCES"。
# 注意，不传该参数表示保留现有权限，如需清除，请在复杂类型Privileges字段传空数组。
# @type ColumnPrivileges: Array
# @param ViewPrivileges: 数据库视图的权限。Privileges 权限的可选值为："SELECT","INSERT","UPDATE","DELETE","CREATE", "DROP","REFERENCES","INDEX","ALTER","CREATE VIEW","SHOW VIEW", "TRIGGER"。
# 注意，不传该参数表示保留现有权限，如需清除，请在复杂类型Privileges字段传空数组。
# @type ViewPrivileges: Array
attr_accessor :InstanceId, :Accounts, :GlobalPrivileges, :DatabasePrivileges, :TablePrivileges, :ColumnPrivileges, :ViewPrivileges
def initialize(instanceid=nil, accounts=nil, globalprivileges=nil, databaseprivileges=nil, tableprivileges=nil, columnprivileges=nil, viewprivileges=nil)
@InstanceId = instanceid
@Accounts = accounts
@GlobalPrivileges = globalprivileges
@DatabasePrivileges = databaseprivileges
@TablePrivileges = tableprivileges
@ColumnPrivileges = columnprivileges
@ViewPrivileges = viewprivileges
end
def deserialize(params)
@InstanceId = params['InstanceId']
unless params['Accounts'].nil?
@Accounts = []
params['Accounts'].each do |i|
account_tmp = Account.new
account_tmp.deserialize(i)
@Accounts << account_tmp
end
end
@GlobalPrivileges = params['GlobalPrivileges']
unless params['DatabasePrivileges'].nil?
@DatabasePrivileges = []
params['DatabasePrivileges'].each do |i|
databaseprivilege_tmp = DatabasePrivilege.new
databaseprivilege_tmp.deserialize(i)
@DatabasePrivileges << databaseprivilege_tmp
end
end
unless params['TablePrivileges'].nil?
@TablePrivileges = []
params['TablePrivileges'].each do |i|
tableprivilege_tmp = TablePrivilege.new
tableprivilege_tmp.deserialize(i)
@TablePrivileges << tableprivilege_tmp
end
end
unless params['ColumnPrivileges'].nil?
@ColumnPrivileges = []
params['ColumnPrivileges'].each do |i|
columnprivilege_tmp = ColumnPrivilege.new
columnprivilege_tmp.deserialize(i)
@ColumnPrivileges << columnprivilege_tmp
end
end
unless params['ViewPrivileges'].nil?
@ViewPrivileges = []
params['ViewPrivileges'].each do |i|
viewprivileges_tmp = ViewPrivileges.new
viewprivileges_tmp.deserialize(i)
@ViewPrivileges << viewprivileges_tmp
end
end
end
end
# ModifyAccountPrivileges返回参数结构体
class ModifyAccountPrivilegesResponse < TencentCloud::Common::AbstractModel
# @param FlowId: 异步任务的请求 ID，可使用此 ID [查询异步任务的执行结果](https://cloud.tencent.com/document/product/237/16177)。
# @type FlowId: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :FlowId, :RequestId
def initialize(flowid=nil, requestid=nil)
@FlowId = flowid
@RequestId = requestid
end
def deserialize(params)
@FlowId = params['FlowId']
@RequestId = params['RequestId']
end
end
# ModifyDBEncryptAttributes请求参数结构体
class ModifyDBEncryptAttributesRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例Id，形如：tdsqlshard-ow728lmc。
# @type InstanceId: String
# @param EncryptEnabled: 是否启用数据加密，开启后暂不支持关闭。本接口的可选值为：1-开启数据加密。
# @type EncryptEnabled: Integer
attr_accessor :InstanceId, :EncryptEnabled
def initialize(instanceid=nil, encryptenabled=nil)
@InstanceId = instanceid
@EncryptEnabled = encryptenabled
end
def deserialize(params)
@InstanceId = params['InstanceId']
@EncryptEnabled = params['EncryptEnabled']
end
end
# ModifyDBEncryptAttributes返回参数结构体
class ModifyDBEncryptAttributesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyDBInstanceName请求参数结构体
class ModifyDBInstanceNameRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID，形如tdsql-hdaprz0v
# @type InstanceId: String
# @param InstanceName: 实例名称
# @type InstanceName: String
attr_accessor :InstanceId, :InstanceName
def initialize(instanceid=nil, instancename=nil)
@InstanceId = instanceid
@InstanceName = instancename
end
def deserialize(params)
@InstanceId = params['InstanceId']
@InstanceName = params['InstanceName']
end
end
# ModifyDBInstanceName返回参数结构体
class ModifyDBInstanceNameResponse < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :InstanceId, :RequestId
def initialize(instanceid=nil, requestid=nil)
@InstanceId = instanceid
@RequestId = requestid
end
def deserialize(params)
@InstanceId = params['InstanceId']
@RequestId = params['RequestId']
end
end
# ModifyDBInstanceSecurityGroups请求参数结构体
class ModifyDBInstanceSecurityGroupsRequest < TencentCloud::Common::AbstractModel
# @param Product: 数据库引擎名称，本接口取值：dcdb。
# @type Product: String
# @param InstanceId: 实例ID。
# @type InstanceId: String
# @param SecurityGroupIds: 要修改的安全组 ID 列表，一个或者多个安全组 ID 组成的数组。
# @type SecurityGroupIds: Array
attr_accessor :Product, :InstanceId, :SecurityGroupIds
def initialize(product=nil, instanceid=nil, securitygroupids=nil)
@Product = product
@InstanceId = instanceid
@SecurityGroupIds = securitygroupids
end
def deserialize(params)
@Product = params['Product']
@InstanceId = params['InstanceId']
@SecurityGroupIds = params['SecurityGroupIds']
end
end
# ModifyDBInstanceSecurityGroups返回参数结构体
class ModifyDBInstanceSecurityGroupsResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyDBInstancesProject请求参数结构体
class ModifyDBInstancesProjectRequest < TencentCloud::Common::AbstractModel
# @param InstanceIds: 待修改的实例ID列表。实例 ID 形如：dcdbt-ow728lmc。
# @type InstanceIds: Array
# @param ProjectId: 要分配的项目 ID，可以通过 DescribeProjects 查询项目列表接口获取。
# @type ProjectId: Integer
attr_accessor :InstanceIds, :ProjectId
def initialize(instanceids=nil, projectid=nil)
@InstanceIds = instanceids
@ProjectId = projectid
end
def deserialize(params)
@InstanceIds = params['InstanceIds']
@ProjectId = params['ProjectId']
end
end
# ModifyDBInstancesProject返回参数结构体
class ModifyDBInstancesProjectResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyDBParameters请求参数结构体
class ModifyDBParametersRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例 ID，形如：dcdbt-ow728lmc。
# @type InstanceId: String
# @param Params: 参数列表，每一个元素是Param和Value的组合
# @type Params: Array
attr_accessor :InstanceId, :Params
def initialize(instanceid=nil, params=nil)
@InstanceId = instanceid
@Params = params
end
def deserialize(params)
@InstanceId = params['InstanceId']
unless params['Params'].nil?
@Params = []
params['Params'].each do |i|
dbparamvalue_tmp = DBParamValue.new
dbparamvalue_tmp.deserialize(i)
@Params << dbparamvalue_tmp
end
end
end
end
# ModifyDBParameters返回参数结构体
class ModifyDBParametersResponse < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例 ID，形如：dcdbt-ow728lmc。
# @type InstanceId: String
# @param Result: 各参数修改结果
# @type Result: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :InstanceId, :Result, :RequestId
def initialize(instanceid=nil, result=nil, requestid=nil)
@InstanceId = instanceid
@Result = result
@RequestId = requestid
end
def deserialize(params)
@InstanceId = params['InstanceId']
unless params['Result'].nil?
@Result = []
params['Result'].each do |i|
parammodifyresult_tmp = ParamModifyResult.new
parammodifyresult_tmp.deserialize(i)
@Result << parammodifyresult_tmp
end
end
@RequestId = params['RequestId']
end
end
# ModifyDBSyncMode请求参数结构体
class ModifyDBSyncModeRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 待修改同步模式的实例ID。形如：dcdbt-ow728lmc。
# @type InstanceId: String
# @param SyncMode: 同步模式：0 异步，1 强同步， 2 强同步可退化
# @type SyncMode: Integer
attr_accessor :InstanceId, :SyncMode
def initialize(instanceid=nil, syncmode=nil)
@InstanceId = instanceid
@SyncMode = syncmode
end
def deserialize(params)
@InstanceId = params['InstanceId']
@SyncMode = params['SyncMode']
end
end
# ModifyDBSyncMode返回参数结构体
class ModifyDBSyncModeResponse < TencentCloud::Common::AbstractModel
# @param FlowId: 异步任务Id，可通过 DescribeFlow 查询任务状态。
# @type FlowId: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :FlowId, :RequestId
def initialize(flowid=nil, requestid=nil)
@FlowId = flowid
@RequestId = requestid
end
def deserialize(params)
@FlowId = params['FlowId']
@RequestId = params['RequestId']
end
end
# ModifyInstanceNetwork请求参数结构体
class ModifyInstanceNetworkRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param VpcId: 希望转到的VPC网络的VpcId
# @type VpcId: String
# @param SubnetId: 希望转到的VPC网络的子网ID
# @type SubnetId: String
# @param Vip: 如果需要指定VIP，填上该字段
# @type Vip: String
# @param Vipv6: 如果需要指定VIPv6，填上该字段
# @type Vipv6: String
# @param VipReleaseDelay: VIP保留时长，单位小时，取值范围（0~168），0表示立即释放，有一分钟释放延迟。不传此参数，默认24小时释放VIP。
# @type VipReleaseDelay: Integer
attr_accessor :InstanceId, :VpcId, :SubnetId, :Vip, :Vipv6, :VipReleaseDelay
def initialize(instanceid=nil, vpcid=nil, subnetid=nil, vip=nil, vipv6=nil, vipreleasedelay=nil)
@InstanceId = instanceid
@VpcId = vpcid
@SubnetId = subnetid
@Vip = vip
@Vipv6 = vipv6
@VipReleaseDelay = vipreleasedelay
end
def deserialize(params)
@InstanceId = params['InstanceId']
@VpcId = params['VpcId']
@SubnetId = params['SubnetId']
@Vip = params['Vip']
@Vipv6 = params['Vipv6']
@VipReleaseDelay = params['VipReleaseDelay']
end
end
# ModifyInstanceNetwork返回参数结构体
class ModifyInstanceNetworkResponse < TencentCloud::Common::AbstractModel
# @param FlowId: 异步任务ID，根据此FlowId通过DescribeFlow接口查询任务进行状态
# @type FlowId: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :FlowId, :RequestId
def initialize(flowid=nil, requestid=nil)
@FlowId = flowid
@RequestId = requestid
end
def deserialize(params)
@FlowId = params['FlowId']
@RequestId = params['RequestId']
end
end
# ModifyInstanceVip请求参数结构体
class ModifyInstanceVipRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param Vip: 实例VIP
# @type Vip: String
# @param Ipv6Flag: IPv6标志
# @type Ipv6Flag: Integer
# @param VipReleaseDelay: VIP保留时长，单位小时，取值范围（0~168），0表示立即释放，有一分钟释放延迟。不传此参数，默认24小时释放VIP。
# @type VipReleaseDelay: Integer
attr_accessor :InstanceId, :Vip, :Ipv6Flag, :VipReleaseDelay
def initialize(instanceid=nil, vip=nil, ipv6flag=nil, vipreleasedelay=nil)
@InstanceId = instanceid
@Vip = vip
@Ipv6Flag = ipv6flag
@VipReleaseDelay = vipreleasedelay
end
def deserialize(params)
@InstanceId = params['InstanceId']
@Vip = params['Vip']
@Ipv6Flag = params['Ipv6Flag']
@VipReleaseDelay = params['VipReleaseDelay']
end
end
# ModifyInstanceVip返回参数结构体
class ModifyInstanceVipResponse < TencentCloud::Common::AbstractModel
# @param FlowId: 异步任务流程ID
# @type FlowId: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :FlowId, :RequestId
def initialize(flowid=nil, requestid=nil)
@FlowId = flowid
@RequestId = requestid
end
def deserialize(params)
@FlowId = params['FlowId']
@RequestId = params['RequestId']
end
end
# ModifyInstanceVport请求参数结构体
class ModifyInstanceVportRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param Vport: 实例VPORT
# @type Vport: Integer
attr_accessor :InstanceId, :Vport
def initialize(instanceid=nil, vport=nil)
@InstanceId = instanceid
@Vport = vport
end
def deserialize(params)
@InstanceId = params['InstanceId']
@Vport = params['Vport']
end
end
# ModifyInstanceVport返回参数结构体
class ModifyInstanceVportResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyRealServerAccessStrategy请求参数结构体
class ModifyRealServerAccessStrategyRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例 ID，格式如：tdsqlshard-c1nl9rpv，与云数据库控制台页面中显示的实例 ID 相同。
# @type InstanceId: String
# @param RsAccessStrategy: RS就近模式, 0-无策略, 1-可用区就近访问。
# @type RsAccessStrategy: Integer
attr_accessor :InstanceId, :RsAccessStrategy
def initialize(instanceid=nil, rsaccessstrategy=nil)
@InstanceId = instanceid
@RsAccessStrategy = rsaccessstrategy
end
def deserialize(params)
@InstanceId = params['InstanceId']
@RsAccessStrategy = params['RsAccessStrategy']
end
end
# ModifyRealServerAccessStrategy返回参数结构体
class ModifyRealServerAccessStrategyResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# 描述DB节点信息
class NodeInfo < TencentCloud::Common::AbstractModel
# @param NodeId: DB节点ID
# @type NodeId: String
# @param Role: DB节点角色，取值为master或者slave
# @type Role: String
attr_accessor :NodeId, :Role
def initialize(nodeid=nil, role=nil)
@NodeId = nodeid
@Role = role
end
def deserialize(params)
@NodeId = params['NodeId']
@Role = params['Role']
end
end
# OpenDBExtranetAccess请求参数结构体
class OpenDBExtranetAccessRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 待开放外网访问的实例ID。形如：dcdbt-ow728lmc。
# @type InstanceId: String
# @param Ipv6Flag: 是否IPv6，默认0
# @type Ipv6Flag: Integer
attr_accessor :InstanceId, :Ipv6Flag
def initialize(instanceid=nil, ipv6flag=nil)
@InstanceId = instanceid
@Ipv6Flag = ipv6flag
end
def deserialize(params)
@InstanceId = params['InstanceId']
@Ipv6Flag = params['Ipv6Flag']
end
end
# OpenDBExtranetAccess返回参数结构体
class OpenDBExtranetAccessResponse < TencentCloud::Common::AbstractModel
# @param FlowId: 异步任务ID，可通过 DescribeFlow 查询任务状态。
# @type FlowId: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :FlowId, :RequestId
def initialize(flowid=nil, requestid=nil)
@FlowId = flowid
@RequestId = requestid
end
def deserialize(params)
@FlowId = params['FlowId']
@RequestId = params['RequestId']
end
end
# 参数约束
class ParamConstraint < TencentCloud::Common::AbstractModel
# @param Type: 约束类型,如枚举enum，区间section
# @type Type: String
# @param Enum: 约束类型为enum时的可选值列表
# @type Enum: String
# @param Range: 约束类型为section时的范围
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Range: :class:`Tencentcloud::Dcdb.v20180411.models.ConstraintRange`
# @param String: 约束类型为string时的可选值列表
# @type String: String
attr_accessor :Type, :Enum, :Range, :String
def initialize(type=nil, enum=nil, range=nil, string=nil)
@Type = type
@Enum = enum
@Range = range
@String = string
end
def deserialize(params)
@Type = params['Type']
@Enum = params['Enum']
unless params['Range'].nil?
@Range = ConstraintRange.new
@Range.deserialize(params['Range'])
end
@String = params['String']
end
end
# DB参数描述
class ParamDesc < TencentCloud::Common::AbstractModel
# @param Param: 参数名字
# @type Param: String
# @param Value: 当前参数值
# @type Value: String
# @param SetValue: 设置过的值，参数生效后，该值和value一样。未设置过就不返回该字段。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SetValue: String
# @param Default: 系统默认值
# @type Default: String
# @param Constraint: 参数限制
# @type Constraint: :class:`Tencentcloud::Dcdb.v20180411.models.ParamConstraint`
# @param HaveSetValue: 是否有设置过值，false:没有设置过值，true:有设置过值。
# @type HaveSetValue: Boolean
# @param NeedRestart: 是否需要重启生效，false:不需要重启，
# true:需要重启
# @type NeedRestart: Boolean
attr_accessor :Param, :Value, :SetValue, :Default, :Constraint, :HaveSetValue, :NeedRestart
def initialize(param=nil, value=nil, setvalue=nil, default=nil, constraint=nil, havesetvalue=nil, needrestart=nil)
@Param = param
@Value = value
@SetValue = setvalue
@Default = default
@Constraint = constraint
@HaveSetValue = havesetvalue
@NeedRestart = needrestart
end
def deserialize(params)
@Param = params['Param']
@Value = params['Value']
@SetValue = params['SetValue']
@Default = params['Default']
unless params['Constraint'].nil?
@Constraint = ParamConstraint.new
@Constraint.deserialize(params['Constraint'])
end
@HaveSetValue = params['HaveSetValue']
@NeedRestart = params['NeedRestart']
end
end
# 修改参数结果
class ParamModifyResult < TencentCloud::Common::AbstractModel
# @param Param: 修改参数名字
# @type Param: String
# @param Code: 参数修改结果。0表示修改成功；-1表示修改失败；-2表示该参数值非法
# @type Code: Integer
attr_accessor :Param, :Code
def initialize(param=nil, code=nil)
@Param = param
@Code = code
end
def deserialize(params)
@Param = params['Param']
@Code = params['Code']
end
end
# 项目信息描述
class Project < TencentCloud::Common::AbstractModel
# @param ProjectId: 项目ID
# @type ProjectId: Integer
# @param OwnerUin: 资源拥有者（主账号）uin
# @type OwnerUin: Integer
# @param AppId: 应用Id
# @type AppId: Integer
# @param Name: 项目名称
# @type Name: String
# @param CreatorUin: 创建者uin
# @type CreatorUin: Integer
# @param SrcPlat: 来源平台
# @type SrcPlat: String
# @param SrcAppId: 来源AppId
# @type SrcAppId: Integer
# @param Status: 项目状态,0正常，-1关闭。默认项目为3
# @type Status: Integer
# @param CreateTime: 创建时间
# @type CreateTime: String
# @param IsDefault: 是否默认项目，1 是，0 不是
# @type IsDefault: Integer
# @param Info: 描述信息
# @type Info: String
attr_accessor :ProjectId, :OwnerUin, :AppId, :Name, :CreatorUin, :SrcPlat, :SrcAppId, :Status, :CreateTime, :IsDefault, :Info
def initialize(projectid=nil, owneruin=nil, appid=nil, name=nil, creatoruin=nil, srcplat=nil, srcappid=nil, status=nil, createtime=nil, isdefault=nil, info=nil)
@ProjectId = projectid
@OwnerUin = owneruin
@AppId = appid
@Name = name
@CreatorUin = creatoruin
@SrcPlat = srcplat
@SrcAppId = srcappid
@Status = status
@CreateTime = createtime
@IsDefault = isdefault
@Info = info
end
def deserialize(params)
@ProjectId = params['ProjectId']
@OwnerUin = params['OwnerUin']
@AppId = params['AppId']
@Name = params['Name']
@CreatorUin = params['CreatorUin']
@SrcPlat = params['SrcPlat']
@SrcAppId = params['SrcAppId']
@Status = params['Status']
@CreateTime = params['CreateTime']
@IsDefault = params['IsDefault']
@Info = params['Info']
end
end
# 售卖可用区信息
class RegionInfo < TencentCloud::Common::AbstractModel
# @param Region: 地域英文ID
# @type Region: String
# @param RegionId: 地域数字ID
# @type RegionId: Integer
# @param RegionName: 地域中文名
# @type RegionName: String
# @param ZoneList: 可用区列表
# @type ZoneList: Array
# @param AvailableChoice: 可选择的主可用区和从可用区
# @type AvailableChoice: Array
attr_accessor :Region, :RegionId, :RegionName, :ZoneList, :AvailableChoice
def initialize(region=nil, regionid=nil, regionname=nil, zonelist=nil, availablechoice=nil)
@Region = region
@RegionId = regionid
@RegionName = regionname
@ZoneList = zonelist
@AvailableChoice = availablechoice
end
def deserialize(params)
@Region = params['Region']
@RegionId = params['RegionId']
@RegionName = params['RegionName']
unless params['ZoneList'].nil?
@ZoneList = []
params['ZoneList'].each do |i|
zonesinfo_tmp = ZonesInfo.new
zonesinfo_tmp.deserialize(i)
@ZoneList << zonesinfo_tmp
end
end
unless params['AvailableChoice'].nil?
@AvailableChoice = []
params['AvailableChoice'].each do |i|
shardzonechooseinfo_tmp = ShardZoneChooseInfo.new
shardzonechooseinfo_tmp.deserialize(i)
@AvailableChoice << shardzonechooseinfo_tmp
end
end
end
end
# RenewDCDBInstance请求参数结构体
class RenewDCDBInstanceRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 待续费的实例ID。形如：dcdbt-ow728lmc，可以通过 DescribeDCDBInstances 查询实例详情获得。
# @type InstanceId: String
# @param Period: 续费时长，单位：月。
# @type Period: Integer
# @param AutoVoucher: 是否自动使用代金券进行支付，默认不使用。
# @type AutoVoucher: Boolean
# @param VoucherIds: 代金券ID列表，目前仅支持指定一张代金券。
# @type VoucherIds: Array
attr_accessor :InstanceId, :Period, :AutoVoucher, :VoucherIds
def initialize(instanceid=nil, period=nil, autovoucher=nil, voucherids=nil)
@InstanceId = instanceid
@Period = period
@AutoVoucher = autovoucher
@VoucherIds = voucherids
end
def deserialize(params)
@InstanceId = params['InstanceId']
@Period = params['Period']
@AutoVoucher = params['AutoVoucher']
@VoucherIds = params['VoucherIds']
end
end
# RenewDCDBInstance返回参数结构体
class RenewDCDBInstanceResponse < TencentCloud::Common::AbstractModel
# @param DealName: 长订单号。可以据此调用 DescribeOrders
# 查询订单详细信息，或在支付失败时调用用户账号相关接口进行支付。
# @type DealName: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :DealName, :RequestId
def initialize(dealname=nil, requestid=nil)
@DealName = dealname
@RequestId = requestid
end
def deserialize(params)
@DealName = params['DealName']
@RequestId = params['RequestId']
end
end
# 保留的网络资源信息
class ReservedNetResource < TencentCloud::Common::AbstractModel
# @param VpcId: 私有网络
# @type VpcId: String
# @param SubnetId: 子网
# @type SubnetId: String
# @param Vip: VpcId,SubnetId下保留的内网ip
# @type Vip: String
# @param Vports: Vip下的端口
# @type Vports: Array
# @param RecycleTime: Vip的回收时间
# @type RecycleTime: String
attr_accessor :VpcId, :SubnetId, :Vip, :Vports, :RecycleTime
def initialize(vpcid=nil, subnetid=nil, vip=nil, vports=nil, recycletime=nil)
@VpcId = vpcid
@SubnetId = subnetid
@Vip = vip
@Vports = vports
@RecycleTime = recycletime
end
def deserialize(params)
@VpcId = params['VpcId']
@SubnetId = params['SubnetId']
@Vip = params['Vip']
@Vports = params['Vports']
@RecycleTime = params['RecycleTime']
end
end
# ResetAccountPassword请求参数结构体
class ResetAccountPasswordRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例 ID，形如：dcdbt-ow728lmc。
# @type InstanceId: String
# @param UserName: 登录用户名。
# @type UserName: String
# @param Host: 用户允许的访问 host，用户名+host唯一确定一个账号。
# @type Host: String
# @param Password: 新密码，由字母、数字或常见符号组成，不能包含分号、单引号和双引号，长度为6~32位。
# @type Password: String
attr_accessor :InstanceId, :UserName, :Host, :Password
def initialize(instanceid=nil, username=nil, host=nil, password=nil)
@InstanceId = instanceid
@UserName = username
@Host = host
@Password = password
end
def deserialize(params)
@InstanceId = params['InstanceId']
@UserName = params['UserName']
@Host = params['Host']
@Password = params['Password']
end
end
# ResetAccountPassword返回参数结构体
class ResetAccountPasswordResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# 标签对象，包含tagKey & tagValue
class ResourceTag < TencentCloud::Common::AbstractModel
# @param TagKey: 标签键key
# @type TagKey: String
# @param TagValue: 标签值value
# @type TagValue: String
attr_accessor :TagKey, :TagValue
def initialize(tagkey=nil, tagvalue=nil)
@TagKey = tagkey
@TagValue = tagvalue
end
def deserialize(params)
@TagKey = params['TagKey']
@TagValue = params['TagValue']
end
end
# 安全组详情
class SecurityGroup < TencentCloud::Common::AbstractModel
# @param ProjectId: 项目ID
# @type ProjectId: Integer
# @param CreateTime: 创建时间，时间格式：yyyy-mm-dd hh:mm:ss
# @type CreateTime: String
# @param SecurityGroupId: 安全组ID
# @type SecurityGroupId: String
# @param SecurityGroupName: 安全组名称
# @type SecurityGroupName: String
# @param SecurityGroupRemark: 安全组备注
# @type SecurityGroupRemark: String
# @param Inbound: 入站规则
# @type Inbound: Array
# @param Outbound: 出站规则
# @type Outbound: Array
attr_accessor :ProjectId, :CreateTime, :SecurityGroupId, :SecurityGroupName, :SecurityGroupRemark, :Inbound, :Outbound
def initialize(projectid=nil, createtime=nil, securitygroupid=nil, securitygroupname=nil, securitygroupremark=nil, inbound=nil, outbound=nil)
@ProjectId = projectid
@CreateTime = createtime
@SecurityGroupId = securitygroupid
@SecurityGroupName = securitygroupname
@SecurityGroupRemark = securitygroupremark
@Inbound = inbound
@Outbound = outbound
end
def deserialize(params)
@ProjectId = params['ProjectId']
@CreateTime = params['CreateTime']
@SecurityGroupId = params['SecurityGroupId']
@SecurityGroupName = params['SecurityGroupName']
@SecurityGroupRemark = params['SecurityGroupRemark']
unless params['Inbound'].nil?
@Inbound = []
params['Inbound'].each do |i|
securitygroupbound_tmp = SecurityGroupBound.new
securitygroupbound_tmp.deserialize(i)
@Inbound << securitygroupbound_tmp
end
end
unless params['Outbound'].nil?
@Outbound = []
params['Outbound'].each do |i|
securitygroupbound_tmp = SecurityGroupBound.new
securitygroupbound_tmp.deserialize(i)
@Outbound << securitygroupbound_tmp
end
end
end
end
# 安全出入口规则
class SecurityGroupBound < TencentCloud::Common::AbstractModel
# @param CidrIp: 来源 IP 或 IP 段，例如192.168.0.0/16
# @type CidrIp: String
# @param Action: 策略，ACCEPT 或者 DROP
# @type Action: String
# @param PortRange: 端口
# @type PortRange: String
# @param IpProtocol: 网络协议，支持 UDP、TCP 等
# @type IpProtocol: String
attr_accessor :CidrIp, :Action, :PortRange, :IpProtocol
def initialize(cidrip=nil, action=nil, portrange=nil, ipprotocol=nil)
@CidrIp = cidrip
@Action = action
@PortRange = portrange
@IpProtocol = ipprotocol
end
def deserialize(params)
@CidrIp = params['CidrIp']
@Action = params['Action']
@PortRange = params['PortRange']
@IpProtocol = params['IpProtocol']
end
end
# DCDB分片信息
class ShardBriefInfo < TencentCloud::Common::AbstractModel
# @param ShardSerialId: 分片SerialId
# @type ShardSerialId: String
# @param ShardInstanceId: 分片ID，形如shard-7vg1o339
# @type ShardInstanceId: String
# @param Status: 分片运行状态
# @type Status: Integer
# @param StatusDesc: 分片运行状态描述
# @type StatusDesc: String
# @param CreateTime: 分片创建时间
# @type CreateTime: String
# @param Memory: 分片内存大小，单位GB
# @type Memory: Integer
# @param Storage: 分片磁盘大小，单位GB
# @type Storage: Integer
# @param LogDisk: 分片日志磁盘空间大小，单位GB
# @type LogDisk: Integer
# @param NodeCount: 分片节点个数
# @type NodeCount: Integer
# @param StorageUsage: 分片磁盘空间使用率
# @type StorageUsage: Float
# @param ProxyVersion: 分片Proxy版本信息
# @type ProxyVersion: String
# @param ShardMasterZone: 分片主DB可用区
# @type ShardMasterZone: String
# @param ShardSlaveZones: 分片从DB可用区
# @type ShardSlaveZones: Array
# @param Cpu: 分片Cpu核数
# @type Cpu: Integer
# @param NodesInfo: DB节点信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type NodesInfo: Array
attr_accessor :ShardSerialId, :ShardInstanceId, :Status, :StatusDesc, :CreateTime, :Memory, :Storage, :LogDisk, :NodeCount, :StorageUsage, :ProxyVersion, :ShardMasterZone, :ShardSlaveZones, :Cpu, :NodesInfo
def initialize(shardserialid=nil, shardinstanceid=nil, status=nil, statusdesc=nil, createtime=nil, memory=nil, storage=nil, logdisk=nil, nodecount=nil, storageusage=nil, proxyversion=nil, shardmasterzone=nil, shardslavezones=nil, cpu=nil, nodesinfo=nil)
@ShardSerialId = shardserialid
@ShardInstanceId = shardinstanceid
@Status = status
@StatusDesc = statusdesc
@CreateTime = createtime
@Memory = memory
@Storage = storage
@LogDisk = logdisk
@NodeCount = nodecount
@StorageUsage = storageusage
@ProxyVersion = proxyversion
@ShardMasterZone = shardmasterzone
@ShardSlaveZones = shardslavezones
@Cpu = cpu
@NodesInfo = nodesinfo
end
def deserialize(params)
@ShardSerialId = params['ShardSerialId']
@ShardInstanceId = params['ShardInstanceId']
@Status = params['Status']
@StatusDesc = params['StatusDesc']
@CreateTime = params['CreateTime']
@Memory = params['Memory']
@Storage = params['Storage']
@LogDisk = params['LogDisk']
@NodeCount = params['NodeCount']
@StorageUsage = params['StorageUsage']
@ProxyVersion = params['ProxyVersion']
@ShardMasterZone = params['ShardMasterZone']
@ShardSlaveZones = params['ShardSlaveZones']
@Cpu = params['Cpu']
unless params['NodesInfo'].nil?
@NodesInfo = []
params['NodesInfo'].each do |i|
nodeinfo_tmp = NodeInfo.new
nodeinfo_tmp.deserialize(i)
@NodesInfo << nodeinfo_tmp
end
end
end
end
# 分片信息
class ShardInfo < TencentCloud::Common::AbstractModel
# @param ShardInstanceId: 分片ID
# @type ShardInstanceId: String
# @param ShardSerialId: 分片Set ID
# @type ShardSerialId: String
# @param Status: 状态：0 创建中，1 流程处理中， 2 运行中，3 分片未初始化，-2 分片已删除
# @type Status: Integer
# @param Createtime: 创建时间
# @type Createtime: String
# @param Memory: 内存大小，单位 GB
# @type Memory: Integer
# @param Storage: 存储大小，单位 GB
# @type Storage: Integer
# @param ShardId: 分片数字ID
# @type ShardId: Integer
# @param NodeCount: 节点数，2 为一主一从， 3 为一主二从
# @type NodeCount: Integer
# @param Pid: 产品类型 Id（过时字段，请勿依赖该值）
# @type Pid: Integer
# @param Cpu: Cpu核数
# @type Cpu: Integer
attr_accessor :ShardInstanceId, :ShardSerialId, :Status, :Createtime, :Memory, :Storage, :ShardId, :NodeCount, :Pid, :Cpu
def initialize(shardinstanceid=nil, shardserialid=nil, status=nil, createtime=nil, memory=nil, storage=nil, shardid=nil, nodecount=nil, pid=nil, cpu=nil)
@ShardInstanceId = shardinstanceid
@ShardSerialId = shardserialid
@Status = status
@Createtime = createtime
@Memory = memory
@Storage = storage
@ShardId = shardid
@NodeCount = nodecount
@Pid = pid
@Cpu = cpu
end
def deserialize(params)
@ShardInstanceId = params['ShardInstanceId']
@ShardSerialId = params['ShardSerialId']
@Status = params['Status']
@Createtime = params['Createtime']
@Memory = params['Memory']
@Storage = params['Storage']
@ShardId = params['ShardId']
@NodeCount = params['NodeCount']
@Pid = params['Pid']
@Cpu = params['Cpu']
end
end
# 分片节点可用区选择
class ShardZoneChooseInfo < TencentCloud::Common::AbstractModel
# @param MasterZone: 主可用区
# @type MasterZone: :class:`Tencentcloud::Dcdb.v20180411.models.ZonesInfo`
# @param SlaveZones: 可选的从可用区
# @type SlaveZones: Array
attr_accessor :MasterZone, :SlaveZones
def initialize(masterzone=nil, slavezones=nil)
@MasterZone = masterzone
@SlaveZones = slavezones
end
def deserialize(params)
unless params['MasterZone'].nil?
@MasterZone = ZonesInfo.new
@MasterZone.deserialize(params['MasterZone'])
end
unless params['SlaveZones'].nil?
@SlaveZones = []
params['SlaveZones'].each do |i|
zonesinfo_tmp = ZonesInfo.new
zonesinfo_tmp.deserialize(i)
@SlaveZones << zonesinfo_tmp
end
end
end
end
# 慢查询条目信息
class SlowLogData < TencentCloud::Common::AbstractModel
# @param CheckSum: 语句校验和，用于查询详情
# @type CheckSum: String
# @param Db: 数据库名称
# @type Db: String
# @param FingerPrint: 抽象的SQL语句
# @type FingerPrint: String
# @param LockTimeAvg: 平均的锁时间
# @type LockTimeAvg: String
# @param LockTimeMax: 最大锁时间
# @type LockTimeMax: String
# @param LockTimeMin: 最小锁时间
# @type LockTimeMin: String
# @param LockTimeSum: 锁时间总和
# @type LockTimeSum: String
# @param QueryCount: 查询次数
# @type QueryCount: String
# @param QueryTimeAvg: 平均查询时间
# @type QueryTimeAvg: String
# @param QueryTimeMax: 最大查询时间
# @type QueryTimeMax: String
# @param QueryTimeMin: 最小查询时间
# @type QueryTimeMin: String
# @param QueryTimeSum: 查询时间总和
# @type QueryTimeSum: String
# @param RowsExaminedSum: 扫描行数
# @type RowsExaminedSum: String
# @param RowsSentSum: 发送行数
# @type RowsSentSum: String
# @param TsMax: 最后执行时间
# @type TsMax: String
# @param TsMin: 首次执行时间
# @type TsMin: String
# @param User: 帐号
# @type User: String
# @param ExampleSql: 样例Sql
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ExampleSql: String
# @param Host: 账户的域名
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Host: String
attr_accessor :CheckSum, :Db, :FingerPrint, :LockTimeAvg, :LockTimeMax, :LockTimeMin, :LockTimeSum, :QueryCount, :QueryTimeAvg, :QueryTimeMax, :QueryTimeMin, :QueryTimeSum, :RowsExaminedSum, :RowsSentSum, :TsMax, :TsMin, :User, :ExampleSql, :Host
def initialize(checksum=nil, db=nil, fingerprint=nil, locktimeavg=nil, locktimemax=nil, locktimemin=nil, locktimesum=nil, querycount=nil, querytimeavg=nil, querytimemax=nil, querytimemin=nil, querytimesum=nil, rowsexaminedsum=nil, rowssentsum=nil, tsmax=nil, tsmin=nil, user=nil, examplesql=nil, host=nil)
@CheckSum = checksum
@Db = db
@FingerPrint = fingerprint
@LockTimeAvg = locktimeavg
@LockTimeMax = locktimemax
@LockTimeMin = locktimemin
@LockTimeSum = locktimesum
@QueryCount = querycount
@QueryTimeAvg = querytimeavg
@QueryTimeMax = querytimemax
@QueryTimeMin = querytimemin
@QueryTimeSum = querytimesum
@RowsExaminedSum = rowsexaminedsum
@RowsSentSum = rowssentsum
@TsMax = tsmax
@TsMin = tsmin
@User = user
@ExampleSql = examplesql
@Host = host
end
def deserialize(params)
@CheckSum = params['CheckSum']
@Db = params['Db']
@FingerPrint = params['FingerPrint']
@LockTimeAvg = params['LockTimeAvg']
@LockTimeMax = params['LockTimeMax']
@LockTimeMin = params['LockTimeMin']
@LockTimeSum = params['LockTimeSum']
@QueryCount = params['QueryCount']
@QueryTimeAvg = params['QueryTimeAvg']
@QueryTimeMax = params['QueryTimeMax']
@QueryTimeMin = params['QueryTimeMin']
@QueryTimeSum = params['QueryTimeSum']
@RowsExaminedSum = params['RowsExaminedSum']
@RowsSentSum = params['RowsSentSum']
@TsMax = params['TsMax']
@TsMin = params['TsMin']
@User = params['User']
@ExampleSql = params['ExampleSql']
@Host = params['Host']
end
end
# 按机型分类的规格配置
class SpecConfig < TencentCloud::Common::AbstractModel
# @param Machine: 规格机型
# @type Machine: String
# @param SpecConfigInfos: 规格列表
# @type SpecConfigInfos: Array
attr_accessor :Machine, :SpecConfigInfos
def initialize(machine=nil, specconfiginfos=nil)
@Machine = machine
@SpecConfigInfos = specconfiginfos
end
def deserialize(params)
@Machine = params['Machine']
unless params['SpecConfigInfos'].nil?
@SpecConfigInfos = []
params['SpecConfigInfos'].each do |i|
specconfiginfo_tmp = SpecConfigInfo.new
specconfiginfo_tmp.deserialize(i)
@SpecConfigInfos << specconfiginfo_tmp
end
end
end
end
# 实例可售卖规格详细信息，创建实例和扩容实例时 NodeCount、Memory 确定售卖规格，硬盘大小可用区间为[MinStorage,MaxStorage]
class SpecConfigInfo < TencentCloud::Common::AbstractModel
# @param NodeCount: 节点个数，2 表示一主一从，3 表示一主二从
# @type NodeCount: Integer
# @param Memory: 内存大小，单位 GB
# @type Memory: Integer
# @param MinStorage: 数据盘规格最小值，单位 GB
# @type MinStorage: Integer
# @param MaxStorage: 数据盘规格最大值，单位 GB
# @type MaxStorage: Integer
# @param SuitInfo: 推荐的使用场景
# @type SuitInfo: String
# @param Pid: 产品类型 Id
# @type Pid: Integer
# @param Qps: 最大 Qps 值
# @type Qps: Integer
# @param Cpu: CPU核数
# @type Cpu: Integer
attr_accessor :NodeCount, :Memory, :MinStorage, :MaxStorage, :SuitInfo, :Pid, :Qps, :Cpu
def initialize(nodecount=nil, memory=nil, minstorage=nil, maxstorage=nil, suitinfo=nil, pid=nil, qps=nil, cpu=nil)
@NodeCount = nodecount
@Memory = memory
@MinStorage = minstorage
@MaxStorage = maxstorage
@SuitInfo = suitinfo
@Pid = pid
@Qps = qps
@Cpu = cpu
end
def deserialize(params)
@NodeCount = params['NodeCount']
@Memory = params['Memory']
@MinStorage = params['MinStorage']
@MaxStorage = params['MaxStorage']
@SuitInfo = params['SuitInfo']
@Pid = params['Pid']
@Qps = params['Qps']
@Cpu = params['Cpu']
end
end
# 升级实例 -- 切分分片类型
class SplitShardConfig < TencentCloud::Common::AbstractModel
# @param ShardInstanceIds: 分片ID数组
# @type ShardInstanceIds: Array
# @param SplitRate: 数据切分比例，固定50%
# @type SplitRate: Integer
# @param ShardMemory: 分片内存大小，单位 GB
# @type ShardMemory: Integer
# @param ShardStorage: 分片存储大小，单位 GB
# @type ShardStorage: Integer
attr_accessor :ShardInstanceIds, :SplitRate, :ShardMemory, :ShardStorage
def initialize(shardinstanceids=nil, splitrate=nil, shardmemory=nil, shardstorage=nil)
@ShardInstanceIds = shardinstanceids
@SplitRate = splitrate
@ShardMemory = shardmemory
@ShardStorage = shardstorage
end
def deserialize(params)
@ShardInstanceIds = params['ShardInstanceIds']
@SplitRate = params['SplitRate']
@ShardMemory = params['ShardMemory']
@ShardStorage = params['ShardStorage']
end
end
# SwitchDBInstanceHA请求参数结构体
class SwitchDBInstanceHARequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例Id，形如 tdsql-ow728lmc。
# @type InstanceId: String
# @param Zone: 切换的目标区域，会自动选择该可用区中延迟最低的节点。
# @type Zone: String
attr_accessor :InstanceId, :Zone
def initialize(instanceid=nil, zone=nil)
@InstanceId = instanceid
@Zone = zone
end
def deserialize(params)
@InstanceId = params['InstanceId']
@Zone = params['Zone']
end
end
# SwitchDBInstanceHA返回参数结构体
class SwitchDBInstanceHAResponse < TencentCloud::Common::AbstractModel
# @param FlowId: 异步流程Id
# @type FlowId: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :FlowId, :RequestId
def initialize(flowid=nil, requestid=nil)
@FlowId = flowid
@RequestId = requestid
end
def deserialize(params)
@FlowId = params['FlowId']
@RequestId = params['RequestId']
end
end
# 数据库列信息
class TableColumn < TencentCloud::Common::AbstractModel
# @param Col: 列名称
# @type Col: String
# @param Type: 列类型
# @type Type: String
attr_accessor :Col, :Type
def initialize(col=nil, type=nil)
@Col = col
@Type = type
end
def deserialize(params)
@Col = params['Col']
@Type = params['Type']
end
end
# 数据库表权限
class TablePrivilege < TencentCloud::Common::AbstractModel
# @param Database: 数据库名
# @type Database: String
# @param Table: 数据库表名
# @type Table: String
# @param Privileges: 权限信息
# @type Privileges: Array
attr_accessor :Database, :Table, :Privileges
def initialize(database=nil, table=nil, privileges=nil)
@Database = database
@Table = table
@Privileges = privileges
end
def deserialize(params)
@Database = params['Database']
@Table = params['Table']
@Privileges = params['Privileges']
end
end
# TerminateDedicatedDBInstance请求参数结构体
class TerminateDedicatedDBInstanceRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 实例 Id，形如：dcdbt-ow728lmc。
# @type InstanceId: String
attr_accessor :InstanceId
def initialize(instanceid=nil)
@InstanceId = instanceid
end
def deserialize(params)
@InstanceId = params['InstanceId']
end
end
# TerminateDedicatedDBInstance返回参数结构体
class TerminateDedicatedDBInstanceResponse < TencentCloud::Common::AbstractModel
# @param FlowId: 异步流程Id
# @type FlowId: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :FlowId, :RequestId
def initialize(flowid=nil, requestid=nil)
@FlowId = flowid
@RequestId = requestid
end
def deserialize(params)
@FlowId = params['FlowId']
@RequestId = params['RequestId']
end
end
# 临时实例
class TmpInstance < TencentCloud::Common::AbstractModel
# @param AppId: 应用ID
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AppId: Integer
# @param CreateTime: 创建时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CreateTime: String
# @param InstanceRemark: 实例备注
# 注意：此字段可能返回 null，表示取不到有效值。
# @type InstanceRemark: String
# @param TempType: 0:非临时实例 ,1:无效临时实例, 2:回档成功的有效临时实例
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TempType: Integer
# @param Status: 实例状态,0:待初始化,1:流程处理中,2:有效状态,-1:已隔离，-2：已下线
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Status: Integer
# @param InstanceId: 实例 ID，形如：tdsql-ow728lmc。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type InstanceId: String
# @param Vip: 实例虚IP
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Vip: String
# @param Vport: 实例虚端口
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Vport: Integer
# @param PeriodEndTime: 有效期结束时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PeriodEndTime: String
# @param SrcInstanceId: 源实例 ID，形如：tdsql-ow728lmc。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SrcInstanceId: String
# @param StatusDesc: 实例状态描述
# 注意：此字段可能返回 null，表示取不到有效值。
# @type StatusDesc: String
# @param Region: 实例所在地域
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Region: String
# @param Zone: 实例所在可用区
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Zone: String
# @param Vipv6: 实例虚IPv6
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Vipv6: String
# @param Ipv6Flag: 实例IPv6标志
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Ipv6Flag: Integer
attr_accessor :AppId, :CreateTime, :InstanceRemark, :TempType, :Status, :InstanceId, :Vip, :Vport, :PeriodEndTime, :SrcInstanceId, :StatusDesc, :Region, :Zone, :Vipv6, :Ipv6Flag
def initialize(appid=nil, createtime=nil, instanceremark=nil, temptype=nil, status=nil, instanceid=nil, vip=nil, vport=nil, periodendtime=nil, srcinstanceid=nil, statusdesc=nil, region=nil, zone=nil, vipv6=nil, ipv6flag=nil)
@AppId = appid
@CreateTime = createtime
@InstanceRemark = instanceremark
@TempType = temptype
@Status = status
@InstanceId = instanceid
@Vip = vip
@Vport = vport
@PeriodEndTime = periodendtime
@SrcInstanceId = srcinstanceid
@StatusDesc = statusdesc
@Region = region
@Zone = zone
@Vipv6 = vipv6
@Ipv6Flag = ipv6flag
end
def deserialize(params)
@AppId = params['AppId']
@CreateTime = params['CreateTime']
@InstanceRemark = params['InstanceRemark']
@TempType = params['TempType']
@Status = params['Status']
@InstanceId = params['InstanceId']
@Vip = params['Vip']
@Vport = params['Vport']
@PeriodEndTime = params['PeriodEndTime']
@SrcInstanceId = params['SrcInstanceId']
@StatusDesc = params['StatusDesc']
@Region = params['Region']
@Zone = params['Zone']
@Vipv6 = params['Vipv6']
@Ipv6Flag = params['Ipv6Flag']
end
end
# UpgradeDCDBInstance请求参数结构体
class UpgradeDCDBInstanceRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 待升级的实例ID。形如：dcdbt-ow728lmc，可以通过 DescribeDCDBInstances 查询实例详情获得。
# @type InstanceId: String
# @param UpgradeType: 升级类型，取值范围:
# <li> ADD: 新增分片 </li>
# <li> EXPAND: 升级实例中的已有分片 </li>
# <li> SPLIT: 将已有分片中的数据切分到新增分片上</li>
# @type UpgradeType: String
# @param AddShardConfig: 新增分片配置，当UpgradeType为ADD时生效。
# @type AddShardConfig: :class:`Tencentcloud::Dcdb.v20180411.models.AddShardConfig`
# @param ExpandShardConfig: 扩容分片配置，当UpgradeType为EXPAND时生效。
# @type ExpandShardConfig: :class:`Tencentcloud::Dcdb.v20180411.models.ExpandShardConfig`
# @param SplitShardConfig: 切分分片配置，当UpgradeType为SPLIT时生效。
# @type SplitShardConfig: :class:`Tencentcloud::Dcdb.v20180411.models.SplitShardConfig`
# @param AutoVoucher: 是否自动使用代金券进行支付，默认不使用。
# @type AutoVoucher: Boolean
# @param VoucherIds: 代金券ID列表，目前仅支持指定一张代金券。
# @type VoucherIds: Array
# @param Zones: 变更部署时指定的新可用区列表，第1个为主可用区，其余为从可用区
# @type Zones: Array
attr_accessor :InstanceId, :UpgradeType, :AddShardConfig, :ExpandShardConfig, :SplitShardConfig, :AutoVoucher, :VoucherIds, :Zones
def initialize(instanceid=nil, upgradetype=nil, addshardconfig=nil, expandshardconfig=nil, splitshardconfig=nil, autovoucher=nil, voucherids=nil, zones=nil)
@InstanceId = instanceid
@UpgradeType = upgradetype
@AddShardConfig = addshardconfig
@ExpandShardConfig = expandshardconfig
@SplitShardConfig = splitshardconfig
@AutoVoucher = autovoucher
@VoucherIds = voucherids
@Zones = zones
end
def deserialize(params)
@InstanceId = params['InstanceId']
@UpgradeType = params['UpgradeType']
unless params['AddShardConfig'].nil?
@AddShardConfig = AddShardConfig.new
@AddShardConfig.deserialize(params['AddShardConfig'])
end
unless params['ExpandShardConfig'].nil?
@ExpandShardConfig = ExpandShardConfig.new
@ExpandShardConfig.deserialize(params['ExpandShardConfig'])
end
unless params['SplitShardConfig'].nil?
@SplitShardConfig = SplitShardConfig.new
@SplitShardConfig.deserialize(params['SplitShardConfig'])
end
@AutoVoucher = params['AutoVoucher']
@VoucherIds = params['VoucherIds']
@Zones = params['Zones']
end
end
# UpgradeDCDBInstance返回参数结构体
class UpgradeDCDBInstanceResponse < TencentCloud::Common::AbstractModel
# @param DealName: 长订单号。可以据此调用 DescribeOrders
# 查询订单详细信息，或在支付失败时调用用户账号相关接口进行支付。
# @type DealName: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :DealName, :RequestId
def initialize(dealname=nil, requestid=nil)
@DealName = dealname
@RequestId = requestid
end
def deserialize(params)
@DealName = params['DealName']
@RequestId = params['RequestId']
end
end
# UpgradeDedicatedDCDBInstance请求参数结构体
class UpgradeDedicatedDCDBInstanceRequest < TencentCloud::Common::AbstractModel
# @param UpgradeType: 升级类型，取值为ADD，SPLIT和EXPAND。ADD-添加分片；SPLIT-切分某个分片；EXPAND-垂直扩容某个分片
# @type UpgradeType: String
# @param InstanceId: 实例ID，形如 dcdbt-mlfjm74h
# @type InstanceId: String
# @param AddShardConfig: 当UpgradeType取值为ADD时，添加分片的配置参数
# @type AddShardConfig: :class:`Tencentcloud::Dcdb.v20180411.models.AddShardConfig`
# @param ExpandShardConfig: 当UpgradeType取值为EXPAND时，垂直扩容分片的配置参数
# @type ExpandShardConfig: :class:`Tencentcloud::Dcdb.v20180411.models.ExpandShardConfig`
# @param SplitShardConfig: 当UpgradeType取值为SPLIT时，切分分片的配置参数
# @type SplitShardConfig: :class:`Tencentcloud::Dcdb.v20180411.models.SplitShardConfig`
# @param SwitchAutoRetry: 错过切换时间窗口时，是否自动重试一次，0-否，1-是
# @type SwitchAutoRetry: Integer
# @param SwitchStartTime: 切换时间窗口开始时间
# @type SwitchStartTime: String
# @param SwitchEndTime: 切换时间窗口结束时间
# @type SwitchEndTime: String
attr_accessor :UpgradeType, :InstanceId, :AddShardConfig, :ExpandShardConfig, :SplitShardConfig, :SwitchAutoRetry, :SwitchStartTime, :SwitchEndTime
def initialize(upgradetype=nil, instanceid=nil, addshardconfig=nil, expandshardconfig=nil, splitshardconfig=nil, switchautoretry=nil, switchstarttime=nil, switchendtime=nil)
@UpgradeType = upgradetype
@InstanceId = instanceid
@AddShardConfig = addshardconfig
@ExpandShardConfig = expandshardconfig
@SplitShardConfig = splitshardconfig
@SwitchAutoRetry = switchautoretry
@SwitchStartTime = switchstarttime
@SwitchEndTime = switchendtime
end
def deserialize(params)
@UpgradeType = params['UpgradeType']
@InstanceId = params['InstanceId']
unless params['AddShardConfig'].nil?
@AddShardConfig = AddShardConfig.new
@AddShardConfig.deserialize(params['AddShardConfig'])
end
unless params['ExpandShardConfig'].nil?
@ExpandShardConfig = ExpandShardConfig.new
@ExpandShardConfig.deserialize(params['ExpandShardConfig'])
end
unless params['SplitShardConfig'].nil?
@SplitShardConfig = SplitShardConfig.new
@SplitShardConfig.deserialize(params['SplitShardConfig'])
end
@SwitchAutoRetry = params['SwitchAutoRetry']
@SwitchStartTime = params['SwitchStartTime']
@SwitchEndTime = params['SwitchEndTime']
end
end
# UpgradeDedicatedDCDBInstance返回参数结构体
class UpgradeDedicatedDCDBInstanceResponse < TencentCloud::Common::AbstractModel
# @param FlowId: 异步任务流程ID
# @type FlowId: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :FlowId, :RequestId
def initialize(flowid=nil, requestid=nil)
@FlowId = flowid
@RequestId = requestid
end
def deserialize(params)
@FlowId = params['FlowId']
@RequestId = params['RequestId']
end
end
# UpgradeHourDCDBInstance请求参数结构体
class UpgradeHourDCDBInstanceRequest < TencentCloud::Common::AbstractModel
# @param InstanceId: 待升级的实例ID。形如：dcdbt-ow728lmc，可以通过 DescribeDCDBInstances 查询实例详情获得。
# @type InstanceId: String
# @param UpgradeType: 升级类型，取值范围:
# <li> ADD: 新增分片 </li>
# <li> EXPAND: 升级实例中的已有分片 </li>
# <li> SPLIT: 将已有分片中的数据切分到新增分片上</li>
# @type UpgradeType: String
# @param AddShardConfig: 新增分片配置，当UpgradeType为ADD时生效。
# @type AddShardConfig: :class:`Tencentcloud::Dcdb.v20180411.models.AddShardConfig`
# @param ExpandShardConfig: 扩容分片配置，当UpgradeType为EXPAND时生效。
# @type ExpandShardConfig: :class:`Tencentcloud::Dcdb.v20180411.models.ExpandShardConfig`
# @param SplitShardConfig: 切分分片配置，当UpgradeType为SPLIT时生效。
# @type SplitShardConfig: :class:`Tencentcloud::Dcdb.v20180411.models.SplitShardConfig`
# @param SwitchStartTime: 切换开始时间，格式如: "2019-12-12 07:00:00"。开始时间必须在当前时间一个小时以后，3天以内。
# @type SwitchStartTime: String
# @param SwitchEndTime: 切换结束时间, 格式如: "2019-12-12 07:15:00"，结束时间必须大于开始时间。
# @type SwitchEndTime: String
# @param SwitchAutoRetry: 是否自动重试。 0：不自动重试 1：自动重试
# @type SwitchAutoRetry: Integer
# @param Zones: 变更部署时指定的新可用区列表，第1个为主可用区，其余为从可用区
# @type Zones: Array
attr_accessor :InstanceId, :UpgradeType, :AddShardConfig, :ExpandShardConfig, :SplitShardConfig, :SwitchStartTime, :SwitchEndTime, :SwitchAutoRetry, :Zones
def initialize(instanceid=nil, upgradetype=nil, addshardconfig=nil, expandshardconfig=nil, splitshardconfig=nil, switchstarttime=nil, switchendtime=nil, switchautoretry=nil, zones=nil)
@InstanceId = instanceid
@UpgradeType = upgradetype
@AddShardConfig = addshardconfig
@ExpandShardConfig = expandshardconfig
@SplitShardConfig = splitshardconfig
@SwitchStartTime = switchstarttime
@SwitchEndTime = switchendtime
@SwitchAutoRetry = switchautoretry
@Zones = zones
end
def deserialize(params)
@InstanceId = params['InstanceId']
@UpgradeType = params['UpgradeType']
unless params['AddShardConfig'].nil?
@AddShardConfig = AddShardConfig.new
@AddShardConfig.deserialize(params['AddShardConfig'])
end
unless params['ExpandShardConfig'].nil?
@ExpandShardConfig = ExpandShardConfig.new
@ExpandShardConfig.deserialize(params['ExpandShardConfig'])
end
unless params['SplitShardConfig'].nil?
@SplitShardConfig = SplitShardConfig.new
@SplitShardConfig.deserialize(params['SplitShardConfig'])
end
@SwitchStartTime = params['SwitchStartTime']
@SwitchEndTime = params['SwitchEndTime']
@SwitchAutoRetry = params['SwitchAutoRetry']
@Zones = params['Zones']
end
end
# UpgradeHourDCDBInstance返回参数结构体
class UpgradeHourDCDBInstanceResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# 用户任务信息
class UserTaskInfo < TencentCloud::Common::AbstractModel
# @param Id: 任务ID
# @type Id: Integer
# @param AppId: 用户账户ID
# @type AppId: Integer
# @param Status: 任务状态，0-任务初始化中；1-任务运行中；2-任务成功；3-任务失败
# @type Status: Integer
# @param UserTaskType: 任务类型，0-实例回档；1-实例创建；2-实例扩容；3-实例迁移；4-实例删除；5-实例重启
# @type UserTaskType: Integer
# @param CreateTime: 任务创建时间
# @type CreateTime: String
# @param EndTime: 任务结束时间
# @type EndTime: String
# @param ErrMsg: 任务错误信息
# @type ErrMsg: String
# @param InputData: 客户端参数
# @type InputData: String
# @param InstanceId: 实例ID
# @type InstanceId: String
# @param InstanceName: 实例名称
# @type InstanceName: String
# @param RegionId: 地域ID
# @type RegionId: Integer
attr_accessor :Id, :AppId, :Status, :UserTaskType, :CreateTime, :EndTime, :ErrMsg, :InputData, :InstanceId, :InstanceName, :RegionId
def initialize(id=nil, appid=nil, status=nil, usertasktype=nil, createtime=nil, endtime=nil, errmsg=nil, inputdata=nil, instanceid=nil, instancename=nil, regionid=nil)
@Id = id
@AppId = appid
@Status = status
@UserTaskType = usertasktype
@CreateTime = createtime
@EndTime = endtime
@ErrMsg = errmsg
@InputData = inputdata
@InstanceId = instanceid
@InstanceName = instancename
@RegionId = regionid
end
def deserialize(params)
@Id = params['Id']
@AppId = params['AppId']
@Status = params['Status']
@UserTaskType = params['UserTaskType']
@CreateTime = params['CreateTime']
@EndTime = params['EndTime']
@ErrMsg = params['ErrMsg']
@InputData = params['InputData']
@InstanceId = params['InstanceId']
@InstanceName = params['InstanceName']
@RegionId = params['RegionId']
end
end
# 视图权限信息
class ViewPrivileges < TencentCloud::Common::AbstractModel
# @param Database: 数据库名
# @type Database: String
# @param View: 数据库视图名
# @type View: String
# @param Privileges: 权限信息
# @type Privileges: Array
attr_accessor :Database, :View, :Privileges
def initialize(database=nil, view=nil, privileges=nil)
@Database = database
@View = view
@Privileges = privileges
end
def deserialize(params)
@Database = params['Database']
@View = params['View']
@Privileges = params['Privileges']
end
end
# 可用区信息
class ZonesInfo < TencentCloud::Common::AbstractModel
# @param Zone: 可用区英文ID
# @type Zone: String
# @param ZoneId: 可用区数字ID
# @type ZoneId: Integer
# @param ZoneName: 可用区中文名
# @type ZoneName: String
# @param OnSale: 是否在售
# @type OnSale: Boolean
attr_accessor :Zone, :ZoneId, :ZoneName, :OnSale
def initialize(zone=nil, zoneid=nil, zonename=nil, onsale=nil)
@Zone = zone
@ZoneId = zoneid
@ZoneName = zonename
@OnSale = onsale
end
def deserialize(params)
@Zone = params['Zone']
@ZoneId = params['ZoneId']
@ZoneName = params['ZoneName']
@OnSale = params['OnSale']
end
end
end
end
end