require "singleton"
require "rack"

class Jets::Application
  include Singleton
  extend Memoist
  autoload :Middleware, "jets/middleware"
  include Jets::Middleware

  def configure(&block)
    instance_eval(&block) if block
  end

  def setup!
    load_default_config
    setup_auto_load_paths
  end

  def configs!
    load_environments_config
    load_db_config
    set_iam_policy # relies on dependent values, must be called afterwards
    normalize_env_vars!
  end

  # After the mimimal template gets build, we need to reload it for the full stack
  # creation. This allows us to reference IAM policies configs that depend on the
  # creation of the s3 bucket.
  def reload_configs!
    # Tricky: reset only the things that depends on the minimal stack
    @config.iam_policy = nil
    configs!
  end

  def finish!
    deprecated_configs_message
    load_inflections
    load_routes
    # Load libraries at the end to trigger onload so we can defined options in any order.
    # Only action_mailer library have been used properly this way so far.
    require 'action_mailer'
  end

  def load_inflections
    Jets::Inflections.load!
  end

  def config
    @config ||= ActiveSupport::OrderedOptions.new # dont use memoize since we reset @config later
  end

  def default_config
    config = ActiveSupport::OrderedOptions.new
    config.project_name = parse_project_name # must set early because other configs requires this
    config.cors = false
    config.autoload_paths = default_autoload_paths
    config.extra_autoload_paths = []
    config.logger = Jets::Logger.new($stderr)

    # function properties defaults
    config.function = ActiveSupport::OrderedOptions.new
    config.function.timeout = 30
    # default memory setting based on:
    # https://medium.com/epsagon/how-to-make-lambda-faster-memory-performance-benchmark-be6ebc41f0fc
    config.function.memory_size = 1536

    config.prewarm = ActiveSupport::OrderedOptions.new
    config.prewarm.enable = true
    config.prewarm.rate = '30 minutes'
    config.prewarm.concurrency = 2
    config.prewarm.public_ratio = 3
    config.prewarm.rack_ratio = 5

    config.gems = ActiveSupport::OrderedOptions.new
    config.gems.sources = [
      Jets.default_gems_source
    ]

    config.inflections = ActiveSupport::OrderedOptions.new
    config.inflections.irregular = {}

    config.assets = ActiveSupport::OrderedOptions.new
    config.assets.folders = %w[assets images packs]
    config.assets.base_url = nil # IE: https://cloudfront.com/my/base/path
    config.assets.max_age = 3600
    config.assets.cache_control = nil # IE: public, max-age=3600 , max_age is a shorter way to set cache_control.

    config.ruby = ActiveSupport::OrderedOptions.new

    config.middleware = Jets::Middleware::Configurator.new

    config.session = ActiveSupport::OrderedOptions.new
    config.session.store = Rack::Session::Cookie # note when accessing it use session[:store] since .store is an OrderedOptions method
    config.session.options = {}

    config.api = ActiveSupport::OrderedOptions.new
    config.api.authorization_type = "NONE"
    config.api.cors_authorization_type = nil # nil so ApiGateway::Cors#cors_authorization_type handles
    config.api.binary_media_types = ['multipart/form-data']
    config.api.endpoint_type = 'EDGE' # PRIVATE, EDGE, REGIONAL

    config.domain = ActiveSupport::OrderedOptions.new
    # config.domain.name = "#{Jets.project_namespace}.coolapp.com" # Default is nil
    # config.domain.cert_arn = "..."
    config.domain.endpoint_type = "REGIONAL" # EDGE or REGIONAL. Default to EDGE because CloudFormation update is faster
    config.domain.route53 = true # controls whether or not to create the managed route53 record.
      # Useful to disable this when user wants to manage the route themself like pointing
      # it to CloudFront for blue-green deployments instead.

    # Custom user lambda layers
    config.lambda = ActiveSupport::OrderedOptions.new
    config.lambda.layers = []

    # Only used for Jets Afterburner, Mega Mode currently. This is a fallback default
    # encoding.  Usually, the Rails response will return a content-type header and
    # the encoding in there is used when possible. Example Content-Type header:
    #   Content-Type    text/html; charset=utf-8
    config.encoding = ActiveSupport::OrderedOptions.new
    config.encoding.default = "utf-8"

    config.s3_event = ActiveSupport::OrderedOptions.new
    # These notification_configuration properties correspond to the ruby aws-sdk
    #   s3.put_bucket_notification_configuration
    # in jets/s3_bucket_config.rb, not the CloudFormation Bucket properties. The CloudFormation
    # bucket properties have a similiar structure but is slightly different so it can be confusing.
    #
    #   Ruby aws-sdk S3 Docs: https://amzn.to/2N7m5Lr
    config.s3_event.configure_bucket = true
    config.s3_event.notification_configuration = {
      topic_configurations: [
        {
          events: ["s3:ObjectCreated:*"],
          topic_arn: "!Ref SnsTopic", # must use this logical id
        },
      ],
    }

    # So tried to defined this in the jets/mailer.rb Turbine only but jets new requires it
    # config.action_mailer = ActiveSupport::OrderedOptions.new

    config
  end

  # Double evaling config/application.rb causes subtle issues:
  #   * double loading of shared resources: Jets::Stack.subclasses will have the same
  #   class twice when config is called when declaring a function
  #   * forces us to rescue all exceptions, which is a big hammer
  #
  # Lets parse for the project name instead for now.
  #
  def parse_project_name
    return ENV['JETS_PROJECT_NAME'] if ENV['JETS_PROJECT_NAME'] # override

    lines = IO.readlines("#{Jets.root}/config/application.rb")
    project_name_line = lines.find { |l| l =~ /config\.project_name.*=/ }
    project_name_line.gsub(/.*=/,'').strip.gsub(/["']/,'') # project_name
  end

  def load_default_config
    @config = default_config
    set_dependent_configs! # things like project_namespace that need project_name
    eval_app_config # this overwrites Jets.config.project_name
    Jets.config.project_name = parse_project_name # Must set again because JETS_PROJECT_NAME is possible
  end

  def eval_app_config
    app_config = "#{Jets.root}/config/application.rb"
    load app_config # use load instead of require so reload_configs! works
  end

  def load_environments_config
    env_file = "#{Jets.root}/config/environments/#{Jets.env}.rb"
    if File.exist?(env_file)
      code = IO.read(env_file)
      instance_eval(code)
    end
  end

  def deprecated_configs_message
    unless config.ruby.lazy_load.nil?
      puts "Detected config.ruby.lazy_load = #{config.ruby.lazy_load.inspect}".color(:yellow)
      puts "Deprecated: config.ruby.lazy_load".color(:yellow)
      puts "Gems are now bundled with with Lambda Layer and there's no need to lazy load them."
      puts "Please remove the config in your config/application.rb or config/environments files."
      puts "You can have Jets automatically do this by running:"
      puts "  jets upgrade"
    end
  end

  def setup_auto_load_paths
    autoload_paths = config.autoload_paths + config.extra_autoload_paths
    autoload_paths += internal_autoload_paths # internal_autoload_paths are last
    autoload_paths.each do |path|
      next unless File.exist?(path)
      Jets.loader.push_dir(path)
    end
    Jets.loader.enable_reloading if Jets.env.development?
    Jets.loader.setup
  end

  # Essentially folders under app folder will be the default_autoload_paths. Example:
  #   app/controllers
  #   app/helpers
  #   app/jobs
  #   app/models
  #   app/rules
  #   app/shared/resources
  #
  # Also include:
  #   app/models/concerns
  #   app/controllers/concerns
  def default_autoload_paths
    paths = []
    Dir.glob("#{Jets.root}/app/*").each do |p|
      p.sub!('./','')
      paths << p unless exclude_autoload_path?(p)
    end
    # Handle concerns folders
    Dir.glob("#{Jets.root}/app/**/concerns").each do |p|
      p.sub!('./','')
      paths << p unless exclude_autoload_path?(p)
    end

    paths << "#{Jets.root}/app/shared/resources"
    paths << "#{Jets.root}/app/shared/extensions"

    paths
  end

  def exclude_autoload_path?(path)
    path =~ %r{app/javascript} || path =~ %r{app/views}
  end

  def internal_autoload_paths
    internal = File.expand_path("../internal", __FILE__)
    paths = %w[
      app/controllers
      app/helpers
      app/jobs
      app/models
    ]
    paths.map { |path| "#{internal}/#{path}" }
  end

  # Use the shorter name in stack names, but use the full name when it
  # comes to checking for the env.
  #
  # Example:
  #
  #   Jets.env: 'development'
  #   Jets.config.project_namespace: 'demo-dev'
  ENV_MAP = {
    development: 'dev',
    production: 'prod',
    staging: 'stag',
  }
  def set_dependent_configs!
    # env_extra can be also be set with JETS_ENV_EXTRA.
    # JETS_ENV_EXTRA higher precedence than config.env_extra
    config.env_extra = ENV['JETS_ENV_EXTRA'] if ENV['JETS_ENV_EXTRA']
    # IE: With env_extra: project-dev-1
    #     Without env_extra: project-dev
    config.short_env = ENV_MAP[Jets.env.to_sym] || Jets.env
    # table_namespace does not have the env_extra, more common case desired.
    config.table_namespace = [config.project_name, config.short_env].compact.join('-')

    config.project_namespace = Jets.project_namespace
  end

  def set_iam_policy
    config.iam_policy ||= self.class.default_iam_policy
    config.managed_policy_definitions ||= [] # default empty
  end

  def self.default_iam_policy
    project_namespace = Jets.project_namespace
    logs = {
      action: ["logs:*"],
      effect: "Allow",
      resource: "arn:aws:logs:#{Jets.aws.region}:#{Jets.aws.account}:log-group:/aws/lambda/#{project_namespace}-*",
    }
    s3_bucket = Jets.aws.s3_bucket
    s3_readonly = {
      action: ["s3:Get*", "s3:List*"],
      effect: "Allow",
      resource: "arn:aws:s3:::#{s3_bucket}*",
    }
    s3_bucket = {
      action: ["s3:ListAllMyBuckets", "s3:HeadBucket"],
      effect: "Allow",
      resource: "arn:aws:s3:::*", # scoped to all buckets
    }
    policies = [logs, s3_readonly, s3_bucket]

    if Jets::Stack.has_resources?
      cloudformation = {
        action: ["cloudformation:DescribeStacks"],
        effect: "Allow",
        resource: "arn:aws:cloudformation:#{Jets.aws.region}:#{Jets.aws.account}:stack/#{project_namespace}*",
      }
      policies << cloudformation
    end
    policies
  end

  # It is pretty easy to attempt to set environment variables without
  # the correct AWS Environment.Variables path struture.
  # Auto-fix it for convenience.
  def normalize_env_vars!
    environment = config.function.environment
    if environment and !environment.to_h.key?(:variables)
      config.function.environment = {
        variables: environment.to_h
      }
    end
  end

  def load_db_config
    config.database = {}

    Jets::Dotenv.load!
    database_yml = "#{Jets.root}/config/database.yml"
    if File.exist?(database_yml)
      text = Jets::Erb.result(database_yml)
      db_config = YAML.load(text)
      config.database = db_config
    end
  end

  # Naming it routes because config/routes.rb requires
  #
  #   Jets.application.routes.draw do
  #
  # for scaffolding to work.
  def routes
    @router ||= Jets::Router.new
  end

  def load_routes(refresh: false)
    @router = nil if refresh # clear_routes

    routes_file = "#{Jets.root}/config/routes.rb"
    if refresh
      load routes_file # always evaluate
    else
      require routes_file # evaluate once
    end
  end

  def aws
    Jets::AwsInfo.new
  end
  memoize :aws

end