# # Section UserX Comments # # In the following User sections, users should configure usernames, passwords, # and access rights for IPMI over LAN communication. Usernames can be set to any # string with the exception of User1, which is a fixed to the "anonymous" # username in IPMI. # # For IPMI over LAN access for a username, set "Enable_User" to "Yes", # "Lan_Enable_IPMI_Msgs" to "Yes", and "Lan_Privilege_Limit" to a privilege # level. The privilege level is used to limit various IPMI operations for # individual usernames. It is recommened that atleast one username be created # with a privilege limit "Administrator", so all system functions are available # to atleast one username via IPMI over LAN. For security reasons, we recommend # not enabling the "anonymous" User1. For most users, "Lan_Session_Limit" can be # set to 0 (or ignored) to support an unlimited number of simultaneous IPMI over # LAN sessions. # # If your system supports IPMI 2.0 and Serial-over-LAN (SOL), # a"SOL_Payload_Access" field may be listed below. Set the "SOL_Payload_Access" # field to "Yes" or "No" to enable or disable this username's ability to access # SOL. # # Please do not forget to uncomment those fields, such as "Password", that may # be commented out during the checkout. # # Some motherboards may require a "Username" to be configured prior to other # fields being read/written. If this is the case, those fields will be set to # . # Section User1 ## Give Username ## Username NULL ## Give password or blank to clear. MAX 16 chars (20 chars if IPMI 2.0 supported). ## Password ## Possible values: Yes/No or blank to not set Enable_User Yes ## Possible values: Yes/No Lan_Enable_IPMI_Msgs Yes ## Possible values: Yes/No Lan_Enable_Link_Auth No ## Possible values: Yes/No Lan_Enable_Restricted_to_Callback No ## Possible values: Callback/User/Operator/Administrator/OEM_Proprietary/No_Access Lan_Privilege_Limit Administrator ## Possible values: 0-17, 0 is unlimited; May be reset to 0 if not specified ## Lan_Session_Limit EndSection Section User2 ## Give Username Username admin ## Give password or blank to clear. MAX 16 chars (20 chars if IPMI 2.0 supported). ## Password ## Possible values: Yes/No or blank to not set Enable_User Yes ## Possible values: Yes/No Lan_Enable_IPMI_Msgs Yes ## Possible values: Yes/No Lan_Enable_Link_Auth No ## Possible values: Yes/No Lan_Enable_Restricted_to_Callback No ## Possible values: Callback/User/Operator/Administrator/OEM_Proprietary/No_Access Lan_Privilege_Limit Administrator ## Possible values: 0-17, 0 is unlimited; May be reset to 0 if not specified ## Lan_Session_Limit EndSection Section User3 ## Give Username Username admin3 ## Give password or blank to clear. MAX 16 chars (20 chars if IPMI 2.0 supported). ## Password ## Possible values: Yes/No or blank to not set Enable_User No ## Possible values: Yes/No Lan_Enable_IPMI_Msgs No ## Possible values: Yes/No Lan_Enable_Link_Auth No ## Possible values: Yes/No Lan_Enable_Restricted_to_Callback No ## Possible values: Callback/User/Operator/Administrator/OEM_Proprietary/No_Access Lan_Privilege_Limit No_Access ## Possible values: 0-17, 0 is unlimited; May be reset to 0 if not specified ## Lan_Session_Limit EndSection Section User4 ## Give Username Username (Empty User) ## Give password or blank to clear. MAX 16 chars (20 chars if IPMI 2.0 supported). ## Password ## Possible values: Yes/No or blank to not set Enable_User No ## Possible values: Yes/No Lan_Enable_IPMI_Msgs No ## Possible values: Yes/No Lan_Enable_Link_Auth No ## Possible values: Yes/No Lan_Enable_Restricted_to_Callback No ## Possible values: Callback/User/Operator/Administrator/OEM_Proprietary/No_Access Lan_Privilege_Limit No_Access ## Possible values: 0-17, 0 is unlimited; May be reset to 0 if not specified ## Lan_Session_Limit EndSection Section User5 ## Give Username Username (Empty User) ## Give password or blank to clear. MAX 16 chars (20 chars if IPMI 2.0 supported). ## Password ## Possible values: Yes/No or blank to not set Enable_User No ## Possible values: Yes/No Lan_Enable_IPMI_Msgs No ## Possible values: Yes/No Lan_Enable_Link_Auth No ## Possible values: Yes/No Lan_Enable_Restricted_to_Callback No ## Possible values: Callback/User/Operator/Administrator/OEM_Proprietary/No_Access Lan_Privilege_Limit No_Access ## Possible values: 0-17, 0 is unlimited; May be reset to 0 if not specified ## Lan_Session_Limit EndSection Section User6 ## Give Username Username (Empty User) ## Give password or blank to clear. MAX 16 chars (20 chars if IPMI 2.0 supported). ## Password ## Possible values: Yes/No or blank to not set Enable_User No ## Possible values: Yes/No Lan_Enable_IPMI_Msgs No ## Possible values: Yes/No Lan_Enable_Link_Auth No ## Possible values: Yes/No Lan_Enable_Restricted_to_Callback No ## Possible values: Callback/User/Operator/Administrator/OEM_Proprietary/No_Access Lan_Privilege_Limit No_Access ## Possible values: 0-17, 0 is unlimited; May be reset to 0 if not specified ## Lan_Session_Limit EndSection Section User7 ## Give Username Username (Empty User) ## Give password or blank to clear. MAX 16 chars (20 chars if IPMI 2.0 supported). ## Password ## Possible values: Yes/No or blank to not set Enable_User No ## Possible values: Yes/No Lan_Enable_IPMI_Msgs No ## Possible values: Yes/No Lan_Enable_Link_Auth No ## Possible values: Yes/No Lan_Enable_Restricted_to_Callback No ## Possible values: Callback/User/Operator/Administrator/OEM_Proprietary/No_Access Lan_Privilege_Limit No_Access ## Possible values: 0-17, 0 is unlimited; May be reset to 0 if not specified ## Lan_Session_Limit EndSection Section User8 ## Give Username Username (Empty User) ## Give password or blank to clear. MAX 16 chars (20 chars if IPMI 2.0 supported). ## Password ## Possible values: Yes/No or blank to not set Enable_User No ## Possible values: Yes/No Lan_Enable_IPMI_Msgs No ## Possible values: Yes/No Lan_Enable_Link_Auth No ## Possible values: Yes/No Lan_Enable_Restricted_to_Callback No ## Possible values: Callback/User/Operator/Administrator/OEM_Proprietary/No_Access Lan_Privilege_Limit No_Access ## Possible values: 0-17, 0 is unlimited; May be reset to 0 if not specified ## Lan_Session_Limit EndSection Section User9 ## Give Username Username (Empty User) ## Give password or blank to clear. MAX 16 chars (20 chars if IPMI 2.0 supported). ## Password ## Possible values: Yes/No or blank to not set Enable_User No ## Possible values: Yes/No Lan_Enable_IPMI_Msgs No ## Possible values: Yes/No Lan_Enable_Link_Auth No ## Possible values: Yes/No Lan_Enable_Restricted_to_Callback No ## Possible values: Callback/User/Operator/Administrator/OEM_Proprietary/No_Access Lan_Privilege_Limit No_Access ## Possible values: 0-17, 0 is unlimited; May be reset to 0 if not specified ## Lan_Session_Limit EndSection Section User10 ## Give Username Username (Empty User) ## Give password or blank to clear. MAX 16 chars (20 chars if IPMI 2.0 supported). ## Password ## Possible values: Yes/No or blank to not set Enable_User No ## Possible values: Yes/No Lan_Enable_IPMI_Msgs No ## Possible values: Yes/No Lan_Enable_Link_Auth No ## Possible values: Yes/No Lan_Enable_Restricted_to_Callback No ## Possible values: Callback/User/Operator/Administrator/OEM_Proprietary/No_Access Lan_Privilege_Limit No_Access ## Possible values: 0-17, 0 is unlimited; May be reset to 0 if not specified ## Lan_Session_Limit EndSection Section User11 ## Give Username Username (Empty User) ## Give password or blank to clear. MAX 16 chars (20 chars if IPMI 2.0 supported). ## Password ## Possible values: Yes/No or blank to not set Enable_User No ## Possible values: Yes/No Lan_Enable_IPMI_Msgs No ## Possible values: Yes/No Lan_Enable_Link_Auth No ## Possible values: Yes/No Lan_Enable_Restricted_to_Callback No ## Possible values: Callback/User/Operator/Administrator/OEM_Proprietary/No_Access Lan_Privilege_Limit No_Access ## Possible values: 0-17, 0 is unlimited; May be reset to 0 if not specified ## Lan_Session_Limit EndSection Section User12 ## Give Username Username (Empty User) ## Give password or blank to clear. MAX 16 chars (20 chars if IPMI 2.0 supported). ## Password ## Possible values: Yes/No or blank to not set Enable_User No ## Possible values: Yes/No Lan_Enable_IPMI_Msgs No ## Possible values: Yes/No Lan_Enable_Link_Auth No ## Possible values: Yes/No Lan_Enable_Restricted_to_Callback No ## Possible values: Callback/User/Operator/Administrator/OEM_Proprietary/No_Access Lan_Privilege_Limit No_Access ## Possible values: 0-17, 0 is unlimited; May be reset to 0 if not specified ## Lan_Session_Limit EndSection # # Section Lan_Channel Comments # # In the Lan_Channel section, general IPMI over LAN can be enabled for disabled. # In the below, "Volatile" configurations are immediately configured onto the # BMC and will have immediate effect on the system. "Non_Volatile" # configurations are only available after the next system reset. Generally, both # the "Volatile" and "Non_Volatile" equivalent fields should be configured # identically. # # To enable IPMI over LAN, typically "Access_Mode" should be set to # "Always_Available". "Channel_Privilege_Limit" should be set to the highest # privilege level any username was configured with. Typically, this is set to # "Administrator". # # "User_Level_Auth" and "Per_Message_Auth" are typically set to "Yes" for # additional security. # Section Lan_Channel ## Possible values: Disabled/Pre_Boot_Only/Always_Available/Shared Volatile_Access_Mode Always_Available ## Possible values: Yes/No Volatile_Enable_User_Level_Auth Yes ## Possible values: Yes/No Volatile_Enable_Per_Message_Auth No ## Possible values: Yes/No Volatile_Enable_Pef_Alerting No ## Possible values: Callback/User/Operator/Administrator/OEM_Proprietary Volatile_Channel_Privilege_Limit Administrator ## Possible values: Disabled/Pre_Boot_Only/Always_Available/Shared Non_Volatile_Access_Mode Always_Available ## Possible values: Yes/No Non_Volatile_Enable_User_Level_Auth Yes ## Possible values: Yes/No Non_Volatile_Enable_Per_Message_Auth No ## Possible values: Yes/No Non_Volatile_Enable_Pef_Alerting No ## Possible values: Callback/User/Operator/Administrator/OEM_Proprietary Non_Volatile_Channel_Privilege_Limit Administrator EndSection # # Section Lan_Conf Comments # # In the Lan_Conf section, typical networking configuration is setup. Most users # will choose to set "Static" for the "IP_Address_Source" and set the # appropriate "IP_Address", "MAC_Address", "Subnet_Mask", etc. for the machine. # Section Lan_Conf ## Possible values: Unspecified/Static/Use_DHCP/Use_BIOS/Use_Others IP_Address_Source Use_DHCP ## Give valid IP address IP_Address 192.168.1.24 ## Give valid MAC address MAC_Address 00:17:A4:49:AB:70 ## Give valid Subnet Mask Subnet_Mask 255.255.255.0 ## Give valid IP address Default_Gateway_IP_Address 192.168.1.1 EndSection # # Section Lan_Conf_Auth Comments # # In the Lan_Conf_Auth section, allowable authentication mechanisms for IPMI 1.5 # is configured. Most users will want to set all "MD5" authentication to "Yes" # and the rest to "No". If you have configured a NULL username and a NULL # password, you will also want to configure some of the "None" fields to "Yes" # to allow "None" authentication to work. Some motherboards do not allow you to # enable OEM authentication, so you may wish to set all OEM related fields to # "No". # Section Lan_Conf_Auth