# frozen_string_literal: true # Copyright (c) 2017-2018 THL A29 Limited, a Tencent company. All Rights Reserved. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. module TencentCloud module Monitor module V20180724 # 策略过滤条件 class AlarmConditionFilter < TencentCloud::Common::AbstractModel # @param Type: 类型 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Type: String # @param Expression: 表达式 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Expression: String # @param Dimensions: 过滤条件 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Dimensions: String attr_accessor :Type, :Expression, :Dimensions def initialize(type=nil, expression=nil, dimensions=nil) @Type = type @Expression = expression @Dimensions = dimensions end def deserialize(params) @Type = params['Type'] @Expression = params['Expression'] @Dimensions = params['Dimensions'] end end # 告警事件 class AlarmEvent < TencentCloud::Common::AbstractModel # @param EventName: 事件名 # @type EventName: String # @param Description: 展示的事件名 # @type Description: String # @param Namespace: 告警策略类型 # @type Namespace: String attr_accessor :EventName, :Description, :Namespace def initialize(eventname=nil, description=nil, namespace=nil) @EventName = eventname @Description = description @Namespace = namespace end def deserialize(params) @EventName = params['EventName'] @Description = params['Description'] @Namespace = params['Namespace'] end end # 聚合条件 class AlarmGroupByItem < TencentCloud::Common::AbstractModel # @param Id: Item Id # 注意:此字段可能返回 null,表示取不到有效值。 # @type Id: String # @param Name: 名称 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Name: String attr_accessor :Id, :Name def initialize(id=nil, name=nil) @Id = id @Name = name end def deserialize(params) @Id = params['Id'] @Name = params['Name'] end end # 通知模板ID及通知等级列表,["Remind","Serious"]表示该通知模板仅接收提醒和严重类别的告警 class AlarmHierarchicalNotice < TencentCloud::Common::AbstractModel # @param NoticeId: 通知模板ID # 注意:此字段可能返回 null,表示取不到有效值。 # @type NoticeId: String # @param Classification: 通知等级列表,["Remind","Serious"]表示该通知模板仅接收提醒和严重类别的告警 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Classification: Array # @param PolicyId: 模板对应的策略id # 注意:此字段可能返回 null,表示取不到有效值。 # @type PolicyId: String attr_accessor :NoticeId, :Classification, :PolicyId def initialize(noticeid=nil, classification=nil, policyid=nil) @NoticeId = noticeid @Classification = classification @PolicyId = policyid end def deserialize(params) @NoticeId = params['NoticeId'] @Classification = params['Classification'] @PolicyId = params['PolicyId'] end end # 告警分级阈值配置 class AlarmHierarchicalValue < TencentCloud::Common::AbstractModel # @param Remind: 提醒等级阈值 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Remind: String # @param Warn: 警告等级阈值 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Warn: String # @param Serious: 严重等级阈值 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Serious: String attr_accessor :Remind, :Warn, :Serious def initialize(remind=nil, warn=nil, serious=nil) @Remind = remind @Warn = warn @Serious = serious end def deserialize(params) @Remind = params['Remind'] @Warn = params['Warn'] @Serious = params['Serious'] end end # 告警历史数据 class AlarmHistory < TencentCloud::Common::AbstractModel # @param AlarmId: 告警历史Id # @type AlarmId: String # @param MonitorType: 监控类型 # @type MonitorType: String # @param Namespace: 策略类型 # @type Namespace: String # @param AlarmObject: 告警对象 # @type AlarmObject: String # @param Content: 告警内容 # @type Content: String # @param FirstOccurTime: 时间戳,首次出现时间 # @type FirstOccurTime: Integer # @param LastOccurTime: 时间戳,最后出现时间 # @type LastOccurTime: Integer # @param AlarmStatus: 告警状态,ALARM=未恢复 OK=已恢复 NO_CONF=已失效 NO_DATA=数据不足 # @type AlarmStatus: String # @param PolicyId: 告警策略 Id # @type PolicyId: String # @param PolicyName: 策略名称 # @type PolicyName: String # @param VPC: 基础产品告警的告警对象所属网络 # @type VPC: String # @param ProjectId: 项目 Id # @type ProjectId: Integer # @param ProjectName: 项目名字 # @type ProjectName: String # @param InstanceGroup: 告警对象所属实例组 # @type InstanceGroup: Array # @param ReceiverUids: 接收人列表 # @type ReceiverUids: Array # @param ReceiverGroups: 接收组列表 # @type ReceiverGroups: Array # @param NoticeWays: 告警渠道列表 SMS=短信 EMAIL=邮件 CALL=电话 WECHAT=微信 # @type NoticeWays: Array # @param OriginId: 可用于实例、实例组的绑定和解绑接口([BindingPolicyObject](https://cloud.tencent.com/document/product/248/40421)、[UnBindingAllPolicyObject](https://cloud.tencent.com/document/product/248/40568)、[UnBindingPolicyObject](https://cloud.tencent.com/document/product/248/40567))的策略 ID # @type OriginId: String # @param AlarmType: 告警类型 # @type AlarmType: String # @param EventId: 事件Id # @type EventId: Integer # @param Region: 地域 # @type Region: String # @param PolicyExists: 策略是否存在 0=不存在 1=存在 # @type PolicyExists: Integer # @param MetricsInfo: 指标信息 # 注意:此字段可能返回 null,表示取不到有效值。 # @type MetricsInfo: Array # @param Dimensions: 告警实例的维度信息 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Dimensions: String # @param AlarmLevel: 告警等级 # 注意:此字段可能返回 null,表示取不到有效值。 # @type AlarmLevel: String # @param ShieldFlag: 是否有配置告警屏蔽规则 # 注意:此字段可能返回 null,表示取不到有效值。 # @type ShieldFlag: Integer # @param AlarmShieldingType: 屏蔽类型(英文) # 注意:此字段可能返回 null,表示取不到有效值。 # @type AlarmShieldingType: String # @param AlarmShieldingTime: 屏蔽时间(英文) # 注意:此字段可能返回 null,表示取不到有效值。 # @type AlarmShieldingTime: String # @param AlarmShieldingShowType: 屏蔽类型(中文) # 注意:此字段可能返回 null,表示取不到有效值。 # @type AlarmShieldingShowType: String # @param AlarmShieldingShowTime: 屏蔽时间(中文) # 注意:此字段可能返回 null,表示取不到有效值。 # @type AlarmShieldingShowTime: String # @param AlarmShieldReason: 屏蔽原因 # 注意:此字段可能返回 null,表示取不到有效值。 # @type AlarmShieldReason: String # @param InternalDimensions: 告警实例的维度信息 # 注意:此字段可能返回 null,表示取不到有效值。 # @type InternalDimensions: String # @param MetricName: 指标名称 # 注意:此字段可能返回 null,表示取不到有效值。 # @type MetricName: String # @param PolicyPermissions: 策略是否有权限 # 注意:此字段可能返回 null,表示取不到有效值。 # @type PolicyPermissions: Integer attr_accessor :AlarmId, :MonitorType, :Namespace, :AlarmObject, :Content, :FirstOccurTime, :LastOccurTime, :AlarmStatus, :PolicyId, :PolicyName, :VPC, :ProjectId, :ProjectName, :InstanceGroup, :ReceiverUids, :ReceiverGroups, :NoticeWays, :OriginId, :AlarmType, :EventId, :Region, :PolicyExists, :MetricsInfo, :Dimensions, :AlarmLevel, :ShieldFlag, :AlarmShieldingType, :AlarmShieldingTime, :AlarmShieldingShowType, :AlarmShieldingShowTime, :AlarmShieldReason, :InternalDimensions, :MetricName, :PolicyPermissions def initialize(alarmid=nil, monitortype=nil, namespace=nil, alarmobject=nil, content=nil, firstoccurtime=nil, lastoccurtime=nil, alarmstatus=nil, policyid=nil, policyname=nil, vpc=nil, projectid=nil, projectname=nil, instancegroup=nil, receiveruids=nil, receivergroups=nil, noticeways=nil, originid=nil, alarmtype=nil, eventid=nil, region=nil, policyexists=nil, metricsinfo=nil, dimensions=nil, alarmlevel=nil, shieldflag=nil, alarmshieldingtype=nil, alarmshieldingtime=nil, alarmshieldingshowtype=nil, alarmshieldingshowtime=nil, alarmshieldreason=nil, internaldimensions=nil, metricname=nil, policypermissions=nil) @AlarmId = alarmid @MonitorType = monitortype @Namespace = namespace @AlarmObject = alarmobject @Content = content @FirstOccurTime = firstoccurtime @LastOccurTime = lastoccurtime @AlarmStatus = alarmstatus @PolicyId = policyid @PolicyName = policyname @VPC = vpc @ProjectId = projectid @ProjectName = projectname @InstanceGroup = instancegroup @ReceiverUids = receiveruids @ReceiverGroups = receivergroups @NoticeWays = noticeways @OriginId = originid @AlarmType = alarmtype @EventId = eventid @Region = region @PolicyExists = policyexists @MetricsInfo = metricsinfo @Dimensions = dimensions @AlarmLevel = alarmlevel @ShieldFlag = shieldflag @AlarmShieldingType = alarmshieldingtype @AlarmShieldingTime = alarmshieldingtime @AlarmShieldingShowType = alarmshieldingshowtype @AlarmShieldingShowTime = alarmshieldingshowtime @AlarmShieldReason = alarmshieldreason @InternalDimensions = internaldimensions @MetricName = metricname @PolicyPermissions = policypermissions end def deserialize(params) @AlarmId = params['AlarmId'] @MonitorType = params['MonitorType'] @Namespace = params['Namespace'] @AlarmObject = params['AlarmObject'] @Content = params['Content'] @FirstOccurTime = params['FirstOccurTime'] @LastOccurTime = params['LastOccurTime'] @AlarmStatus = params['AlarmStatus'] @PolicyId = params['PolicyId'] @PolicyName = params['PolicyName'] @VPC = params['VPC'] @ProjectId = params['ProjectId'] @ProjectName = params['ProjectName'] unless params['InstanceGroup'].nil? @InstanceGroup = [] params['InstanceGroup'].each do |i| instancegroups_tmp = InstanceGroups.new instancegroups_tmp.deserialize(i) @InstanceGroup << instancegroups_tmp end end @ReceiverUids = params['ReceiverUids'] @ReceiverGroups = params['ReceiverGroups'] @NoticeWays = params['NoticeWays'] @OriginId = params['OriginId'] @AlarmType = params['AlarmType'] @EventId = params['EventId'] @Region = params['Region'] @PolicyExists = params['PolicyExists'] unless params['MetricsInfo'].nil? @MetricsInfo = [] params['MetricsInfo'].each do |i| alarmhistorymetric_tmp = AlarmHistoryMetric.new alarmhistorymetric_tmp.deserialize(i) @MetricsInfo << alarmhistorymetric_tmp end end @Dimensions = params['Dimensions'] @AlarmLevel = params['AlarmLevel'] @ShieldFlag = params['ShieldFlag'] @AlarmShieldingType = params['AlarmShieldingType'] @AlarmShieldingTime = params['AlarmShieldingTime'] @AlarmShieldingShowType = params['AlarmShieldingShowType'] @AlarmShieldingShowTime = params['AlarmShieldingShowTime'] @AlarmShieldReason = params['AlarmShieldReason'] @InternalDimensions = params['InternalDimensions'] @MetricName = params['MetricName'] @PolicyPermissions = params['PolicyPermissions'] end end # 告警历史的指标信息 class AlarmHistoryMetric < TencentCloud::Common::AbstractModel # @param QceNamespace: 云产品监控类型查询数据使用的命名空间 # @type QceNamespace: String # @param MetricName: 指标名 # @type MetricName: String # @param Period: 统计周期 # @type Period: Integer # @param Value: 触发告警的数值 # @type Value: String # @param Description: 指标的展示名 # @type Description: String attr_accessor :QceNamespace, :MetricName, :Period, :Value, :Description def initialize(qcenamespace=nil, metricname=nil, period=nil, value=nil, description=nil) @QceNamespace = qcenamespace @MetricName = metricname @Period = period @Value = value @Description = description end def deserialize(params) @QceNamespace = params['QceNamespace'] @MetricName = params['MetricName'] @Period = params['Period'] @Value = params['Value'] @Description = params['Description'] end end # 告警通知模板详情 class AlarmNotice < TencentCloud::Common::AbstractModel # @param Id: 告警通知模板 ID # 注意:此字段可能返回 null,表示取不到有效值。 # @type Id: String # @param Name: 告警通知模板名称 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Name: String # @param UpdatedAt: 上次修改时间 # 注意:此字段可能返回 null,表示取不到有效值。 # @type UpdatedAt: String # @param UpdatedBy: 上次修改人 # 注意:此字段可能返回 null,表示取不到有效值。 # @type UpdatedBy: String # @param NoticeType: 告警通知类型 ALARM=未恢复通知 OK=已恢复通知 ALL=全部通知 # 注意:此字段可能返回 null,表示取不到有效值。 # @type NoticeType: String # @param UserNotices: 用户通知列表 # 注意:此字段可能返回 null,表示取不到有效值。 # @type UserNotices: Array # @param URLNotices: 回调通知列表 # 注意:此字段可能返回 null,表示取不到有效值。 # @type URLNotices: Array # @param IsPreset: 是否是系统预设通知模板 0=否 1=是 # 注意:此字段可能返回 null,表示取不到有效值。 # @type IsPreset: Integer # @param NoticeLanguage: 通知语言 zh-CN=中文 en-US=英文 # 注意:此字段可能返回 null,表示取不到有效值。 # @type NoticeLanguage: String # @param PolicyIds: 告警通知模板绑定的告警策略ID列表 # 注意:此字段可能返回 null,表示取不到有效值。 # @type PolicyIds: Array # @param AMPConsumerId: 后台 amp consumer id # 注意:此字段可能返回 null,表示取不到有效值。 # @type AMPConsumerId: String # @param CLSNotices: 推送cls渠道 # 注意:此字段可能返回 null,表示取不到有效值。 # @type CLSNotices: Array # @param Tags: 通知模板绑定的标签 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Tags: Array attr_accessor :Id, :Name, :UpdatedAt, :UpdatedBy, :NoticeType, :UserNotices, :URLNotices, :IsPreset, :NoticeLanguage, :PolicyIds, :AMPConsumerId, :CLSNotices, :Tags def initialize(id=nil, name=nil, updatedat=nil, updatedby=nil, noticetype=nil, usernotices=nil, urlnotices=nil, ispreset=nil, noticelanguage=nil, policyids=nil, ampconsumerid=nil, clsnotices=nil, tags=nil) @Id = id @Name = name @UpdatedAt = updatedat @UpdatedBy = updatedby @NoticeType = noticetype @UserNotices = usernotices @URLNotices = urlnotices @IsPreset = ispreset @NoticeLanguage = noticelanguage @PolicyIds = policyids @AMPConsumerId = ampconsumerid @CLSNotices = clsnotices @Tags = tags end def deserialize(params) @Id = params['Id'] @Name = params['Name'] @UpdatedAt = params['UpdatedAt'] @UpdatedBy = params['UpdatedBy'] @NoticeType = params['NoticeType'] unless params['UserNotices'].nil? @UserNotices = [] params['UserNotices'].each do |i| usernotice_tmp = UserNotice.new usernotice_tmp.deserialize(i) @UserNotices << usernotice_tmp end end unless params['URLNotices'].nil? @URLNotices = [] params['URLNotices'].each do |i| urlnotice_tmp = URLNotice.new urlnotice_tmp.deserialize(i) @URLNotices << urlnotice_tmp end end @IsPreset = params['IsPreset'] @NoticeLanguage = params['NoticeLanguage'] @PolicyIds = params['PolicyIds'] @AMPConsumerId = params['AMPConsumerId'] unless params['CLSNotices'].nil? @CLSNotices = [] params['CLSNotices'].each do |i| clsnotice_tmp = CLSNotice.new clsnotice_tmp.deserialize(i) @CLSNotices << clsnotice_tmp end end unless params['Tags'].nil? @Tags = [] params['Tags'].each do |i| tag_tmp = Tag.new tag_tmp.deserialize(i) @Tags << tag_tmp end end end end # 告警策略详情 class AlarmPolicy < TencentCloud::Common::AbstractModel # @param PolicyId: 告警策略 ID # 注意:此字段可能返回 null,表示取不到有效值。 # @type PolicyId: String # @param PolicyName: 告警策略名称 # 注意:此字段可能返回 null,表示取不到有效值。 # @type PolicyName: String # @param Remark: 备注信息 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Remark: String # @param MonitorType: 监控类型 MT_QCE=云产品监控 # 注意:此字段可能返回 null,表示取不到有效值。 # @type MonitorType: String # @param Enable: 启停状态 0=停用 1=启用 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Enable: Integer # @param UseSum: 策略组绑定的实例数 # 注意:此字段可能返回 null,表示取不到有效值。 # @type UseSum: Integer # @param ProjectId: 项目 Id -1=无项目 0=默认项目 # 注意:此字段可能返回 null,表示取不到有效值。 # @type ProjectId: Integer # @param ProjectName: 项目名 # 注意:此字段可能返回 null,表示取不到有效值。 # @type ProjectName: String # @param Namespace: 告警策略类型 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Namespace: String # @param ConditionTemplateId: 触发条件模板 Id # 注意:此字段可能返回 null,表示取不到有效值。 # @type ConditionTemplateId: String # @param Condition: 指标触发条件 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Condition: :class:`Tencentcloud::Monitor.v20180724.models.AlarmPolicyCondition` # @param EventCondition: 事件触发条件 # 注意:此字段可能返回 null,表示取不到有效值。 # @type EventCondition: :class:`Tencentcloud::Monitor.v20180724.models.AlarmPolicyEventCondition` # @param NoticeIds: 通知规则 id 列表 # 注意:此字段可能返回 null,表示取不到有效值。 # @type NoticeIds: Array # @param Notices: 通知规则 列表 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Notices: Array # @param TriggerTasks: 触发任务列表 # 注意:此字段可能返回 null,表示取不到有效值。 # @type TriggerTasks: Array # @param ConditionsTemp: 模板策略组 # 注意:此字段可能返回 null,表示取不到有效值。 # 注意:此字段可能返回 null,表示取不到有效值。 # @type ConditionsTemp: :class:`Tencentcloud::Monitor.v20180724.models.ConditionsTemp` # @param LastEditUin: 最后编辑的用户uin # 注意:此字段可能返回 null,表示取不到有效值。 # @type LastEditUin: String # @param UpdateTime: 更新时间 # 注意:此字段可能返回 null,表示取不到有效值。 # 注意:此字段可能返回 null,表示取不到有效值。 # @type UpdateTime: Integer # @param InsertTime: 创建时间 # 注意:此字段可能返回 null,表示取不到有效值。 # 注意:此字段可能返回 null,表示取不到有效值。 # @type InsertTime: Integer # @param Region: 地域 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Region: Array # @param NamespaceShowName: namespace显示名字 # 注意:此字段可能返回 null,表示取不到有效值。 # @type NamespaceShowName: String # @param IsDefault: 是否默认策略,1是,0否 # 注意:此字段可能返回 null,表示取不到有效值。 # @type IsDefault: Integer # @param CanSetDefault: 能否设置默认策略,1是,0否 # 注意:此字段可能返回 null,表示取不到有效值。 # @type CanSetDefault: Integer # @param InstanceGroupId: 实例分组ID # 注意:此字段可能返回 null,表示取不到有效值。 # @type InstanceGroupId: Integer # @param InstanceSum: 实例分组总实例数 # 注意:此字段可能返回 null,表示取不到有效值。 # @type InstanceSum: Integer # @param InstanceGroupName: 实例分组名称 # 注意:此字段可能返回 null,表示取不到有效值。 # @type InstanceGroupName: String # @param RuleType: 触发条件类型 STATIC=静态阈值 DYNAMIC=动态类型 # 注意:此字段可能返回 null,表示取不到有效值。 # @type RuleType: String # @param OriginId: 用于实例、实例组绑定和解绑接口(BindingPolicyObject、UnBindingAllPolicyObject、UnBindingPolicyObject)的策略 ID # 注意:此字段可能返回 null,表示取不到有效值。 # @type OriginId: String # @param TagInstances: 标签 # 注意:此字段可能返回 null,表示取不到有效值。 # @type TagInstances: Array # @param Filter: 过滤条件 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Filter: :class:`Tencentcloud::Monitor.v20180724.models.AlarmConditionFilter` # @param GroupBy: 聚合条件 # 注意:此字段可能返回 null,表示取不到有效值。 # @type GroupBy: Array # @param FilterDimensionsParam: 策略关联的过滤维度信息 # 注意:此字段可能返回 null,表示取不到有效值。 # @type FilterDimensionsParam: String # @param IsOneClick: 是否为一键告警策略 # 注意:此字段可能返回 null,表示取不到有效值。 # @type IsOneClick: Integer # @param OneClickStatus: 一键告警策略是否开启 # 注意:此字段可能返回 null,表示取不到有效值。 # @type OneClickStatus: Integer # @param AdvancedMetricNumber: 高级指标数量 # 注意:此字段可能返回 null,表示取不到有效值。 # @type AdvancedMetricNumber: Integer # @param IsBindAll: 策略是否是全部对象策略 # 注意:此字段可能返回 null,表示取不到有效值。 # @type IsBindAll: Integer # @param Tags: 策略标签 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Tags: Array # @param IsSupportAlarmTag: 是否支持告警标签 # 注意:此字段可能返回 null,表示取不到有效值。 # @type IsSupportAlarmTag: Integer # @param TagOperation: 多标签交/并集关系 # 注意:此字段可能返回 null,表示取不到有效值。 # @type TagOperation: String attr_accessor :PolicyId, :PolicyName, :Remark, :MonitorType, :Enable, :UseSum, :ProjectId, :ProjectName, :Namespace, :ConditionTemplateId, :Condition, :EventCondition, :NoticeIds, :Notices, :TriggerTasks, :ConditionsTemp, :LastEditUin, :UpdateTime, :InsertTime, :Region, :NamespaceShowName, :IsDefault, :CanSetDefault, :InstanceGroupId, :InstanceSum, :InstanceGroupName, :RuleType, :OriginId, :TagInstances, :Filter, :GroupBy, :FilterDimensionsParam, :IsOneClick, :OneClickStatus, :AdvancedMetricNumber, :IsBindAll, :Tags, :IsSupportAlarmTag, :TagOperation def initialize(policyid=nil, policyname=nil, remark=nil, monitortype=nil, enable=nil, usesum=nil, projectid=nil, projectname=nil, namespace=nil, conditiontemplateid=nil, condition=nil, eventcondition=nil, noticeids=nil, notices=nil, triggertasks=nil, conditionstemp=nil, lastedituin=nil, updatetime=nil, inserttime=nil, region=nil, namespaceshowname=nil, isdefault=nil, cansetdefault=nil, instancegroupid=nil, instancesum=nil, instancegroupname=nil, ruletype=nil, originid=nil, taginstances=nil, filter=nil, groupby=nil, filterdimensionsparam=nil, isoneclick=nil, oneclickstatus=nil, advancedmetricnumber=nil, isbindall=nil, tags=nil, issupportalarmtag=nil, tagoperation=nil) @PolicyId = policyid @PolicyName = policyname @Remark = remark @MonitorType = monitortype @Enable = enable @UseSum = usesum @ProjectId = projectid @ProjectName = projectname @Namespace = namespace @ConditionTemplateId = conditiontemplateid @Condition = condition @EventCondition = eventcondition @NoticeIds = noticeids @Notices = notices @TriggerTasks = triggertasks @ConditionsTemp = conditionstemp @LastEditUin = lastedituin @UpdateTime = updatetime @InsertTime = inserttime @Region = region @NamespaceShowName = namespaceshowname @IsDefault = isdefault @CanSetDefault = cansetdefault @InstanceGroupId = instancegroupid @InstanceSum = instancesum @InstanceGroupName = instancegroupname @RuleType = ruletype @OriginId = originid @TagInstances = taginstances @Filter = filter @GroupBy = groupby @FilterDimensionsParam = filterdimensionsparam @IsOneClick = isoneclick @OneClickStatus = oneclickstatus @AdvancedMetricNumber = advancedmetricnumber @IsBindAll = isbindall @Tags = tags @IsSupportAlarmTag = issupportalarmtag @TagOperation = tagoperation end def deserialize(params) @PolicyId = params['PolicyId'] @PolicyName = params['PolicyName'] @Remark = params['Remark'] @MonitorType = params['MonitorType'] @Enable = params['Enable'] @UseSum = params['UseSum'] @ProjectId = params['ProjectId'] @ProjectName = params['ProjectName'] @Namespace = params['Namespace'] @ConditionTemplateId = params['ConditionTemplateId'] unless params['Condition'].nil? @Condition = AlarmPolicyCondition.new @Condition.deserialize(params['Condition']) end unless params['EventCondition'].nil? @EventCondition = AlarmPolicyEventCondition.new @EventCondition.deserialize(params['EventCondition']) end @NoticeIds = params['NoticeIds'] unless params['Notices'].nil? @Notices = [] params['Notices'].each do |i| alarmnotice_tmp = AlarmNotice.new alarmnotice_tmp.deserialize(i) @Notices << alarmnotice_tmp end end unless params['TriggerTasks'].nil? @TriggerTasks = [] params['TriggerTasks'].each do |i| alarmpolicytriggertask_tmp = AlarmPolicyTriggerTask.new alarmpolicytriggertask_tmp.deserialize(i) @TriggerTasks << alarmpolicytriggertask_tmp end end unless params['ConditionsTemp'].nil? @ConditionsTemp = ConditionsTemp.new @ConditionsTemp.deserialize(params['ConditionsTemp']) end @LastEditUin = params['LastEditUin'] @UpdateTime = params['UpdateTime'] @InsertTime = params['InsertTime'] @Region = params['Region'] @NamespaceShowName = params['NamespaceShowName'] @IsDefault = params['IsDefault'] @CanSetDefault = params['CanSetDefault'] @InstanceGroupId = params['InstanceGroupId'] @InstanceSum = params['InstanceSum'] @InstanceGroupName = params['InstanceGroupName'] @RuleType = params['RuleType'] @OriginId = params['OriginId'] unless params['TagInstances'].nil? @TagInstances = [] params['TagInstances'].each do |i| taginstance_tmp = TagInstance.new taginstance_tmp.deserialize(i) @TagInstances << taginstance_tmp end end unless params['Filter'].nil? @Filter = AlarmConditionFilter.new @Filter.deserialize(params['Filter']) end unless params['GroupBy'].nil? @GroupBy = [] params['GroupBy'].each do |i| alarmgroupbyitem_tmp = AlarmGroupByItem.new alarmgroupbyitem_tmp.deserialize(i) @GroupBy << alarmgroupbyitem_tmp end end @FilterDimensionsParam = params['FilterDimensionsParam'] @IsOneClick = params['IsOneClick'] @OneClickStatus = params['OneClickStatus'] @AdvancedMetricNumber = params['AdvancedMetricNumber'] @IsBindAll = params['IsBindAll'] unless params['Tags'].nil? @Tags = [] params['Tags'].each do |i| tag_tmp = Tag.new tag_tmp.deserialize(i) @Tags << tag_tmp end end @IsSupportAlarmTag = params['IsSupportAlarmTag'] @TagOperation = params['TagOperation'] end end # 告警策略指标触发条件 class AlarmPolicyCondition < TencentCloud::Common::AbstractModel # @param IsUnionRule: 告警触发条件的判断方式. 0: 任意; 1: 全部; 2: 复合. 当取值为2的时候为复合告警,与参数 ComplexExpression 配合使用. # 注意:此字段可能返回 null,表示取不到有效值。 # @type IsUnionRule: Integer # @param Rules: 告警触发条件列表 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Rules: Array # @param ComplexExpression: 复合告警触发条件的判断表达式,当 IsUnionRule 取值为2的时候有效. 其作用是描述多个触发条件需要满足表达式求值为True时才算是满足告警条件. # 注意:此字段可能返回 null,表示取不到有效值。 # @type ComplexExpression: String attr_accessor :IsUnionRule, :Rules, :ComplexExpression def initialize(isunionrule=nil, rules=nil, complexexpression=nil) @IsUnionRule = isunionrule @Rules = rules @ComplexExpression = complexexpression end def deserialize(params) @IsUnionRule = params['IsUnionRule'] unless params['Rules'].nil? @Rules = [] params['Rules'].each do |i| alarmpolicyrule_tmp = AlarmPolicyRule.new alarmpolicyrule_tmp.deserialize(i) @Rules << alarmpolicyrule_tmp end end @ComplexExpression = params['ComplexExpression'] end end # 告警策略事件触发条件 class AlarmPolicyEventCondition < TencentCloud::Common::AbstractModel # @param Rules: 告警触发条件列表 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Rules: Array attr_accessor :Rules def initialize(rules=nil) @Rules = rules end def deserialize(params) unless params['Rules'].nil? @Rules = [] params['Rules'].each do |i| alarmpolicyrule_tmp = AlarmPolicyRule.new alarmpolicyrule_tmp.deserialize(i) @Rules << alarmpolicyrule_tmp end end end end # 告警策略过滤条件 class AlarmPolicyFilter < TencentCloud::Common::AbstractModel # @param Type: 过滤条件类型 DIMENSION=使用 Dimensions 做过滤 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Type: String # @param Dimensions: AlarmPolicyDimension 二维数组序列化后的json字符串,一维数组之间互为或关系,一维数组内的元素互为与关系 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Dimensions: String attr_accessor :Type, :Dimensions def initialize(type=nil, dimensions=nil) @Type = type @Dimensions = dimensions end def deserialize(params) @Type = params['Type'] @Dimensions = params['Dimensions'] end end # 告警策略触发条件 class AlarmPolicyRule < TencentCloud::Common::AbstractModel # @param MetricName: 指标名或事件名,支持的指标可以从 [DescribeAlarmMetrics](https://cloud.tencent.com/document/product/248/51283) 查询,支持的事件可以从 [DescribeAlarmEvents](https://cloud.tencent.com/document/product/248/51284) 查询 。 # 注意:此字段可能返回 null,表示取不到有效值。 # @type MetricName: String # @param Period: 秒数 统计周期,支持的值可以从 [DescribeAlarmMetrics](https://cloud.tencent.com/document/product/248/51283) 查询。 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Period: Integer # @param Operator: 英文运算符 # intelligent=无阈值智能检测 # eq=等于 # ge=大于等于 # gt=大于 # le=小于等于 # lt=小于 # ne=不等于 # day_increase=天同比增长 # day_decrease=天同比下降 # day_wave=天同比波动 # week_increase=周同比增长 # week_decrease=周同比下降 # week_wave=周同比波动 # cycle_increase=环比增长 # cycle_decrease=环比下降 # cycle_wave=环比波动 # re=正则匹配 # 支持的值可以从 [DescribeAlarmMetrics](https://cloud.tencent.com/document/product/248/51283) 查询。 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Operator: String # @param Value: 阈值,支持的范围可以从 [DescribeAlarmMetrics](https://cloud.tencent.com/document/product/248/51283) 查询。 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Value: String # @param ContinuePeriod: 周期数 持续通知周期 1=持续1个周期 2=持续2个周期...,支持的值可以从 [DescribeAlarmMetrics](https://cloud.tencent.com/document/product/248/51283) 查询 # 注意:此字段可能返回 null,表示取不到有效值。 # @type ContinuePeriod: Integer # @param NoticeFrequency: 秒数 告警间隔 0=不重复 300=每5分钟告警一次 600=每10分钟告警一次 900=每15分钟告警一次 1800=每30分钟告警一次 3600=每1小时告警一次 7200=每2小时告警一次 10800=每3小时告警一次 21600=每6小时告警一次 43200=每12小时告警一次 86400=每1天告警一次 # 注意:此字段可能返回 null,表示取不到有效值。 # @type NoticeFrequency: Integer # @param IsPowerNotice: 告警频率是否指数增长 0=否 1=是 # 注意:此字段可能返回 null,表示取不到有效值。 # @type IsPowerNotice: Integer # @param Filter: 对于单个触发规则的过滤条件 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Filter: :class:`Tencentcloud::Monitor.v20180724.models.AlarmPolicyFilter` # @param Description: 指标展示名,用于出参 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Description: String # @param Unit: 单位,用于出参 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Unit: String # @param RuleType: 触发条件类型 STATIC=静态阈值 DYNAMIC=动态阈值。创建或编辑策略时,如不填则默认为 STATIC。 # 注意:此字段可能返回 null,表示取不到有效值。 # @type RuleType: String # @param IsAdvanced: 是否为高级指标,0否,1是 # 注意:此字段可能返回 null,表示取不到有效值。 # @type IsAdvanced: Integer # @param IsOpen: 高级指标是否开通,0否,1是 # 注意:此字段可能返回 null,表示取不到有效值。 # @type IsOpen: Integer # @param ProductId: 集成中心产品ID # 注意:此字段可能返回 null,表示取不到有效值。 # @type ProductId: String # @param ValueMax: 最大值 # 注意:此字段可能返回 null,表示取不到有效值。 # @type ValueMax: Float # @param ValueMin: 最小值 # 注意:此字段可能返回 null,表示取不到有效值。 # @type ValueMin: Float # @param HierarchicalValue: 告警分级阈值配置 # 注意:此字段可能返回 null,表示取不到有效值。 # @type HierarchicalValue: :class:`Tencentcloud::Monitor.v20180724.models.AlarmHierarchicalValue` # @param IsLatenessMetric: 是否延迟指标 # 注意:此字段可能返回 null,表示取不到有效值。 # @type IsLatenessMetric: Integer attr_accessor :MetricName, :Period, :Operator, :Value, :ContinuePeriod, :NoticeFrequency, :IsPowerNotice, :Filter, :Description, :Unit, :RuleType, :IsAdvanced, :IsOpen, :ProductId, :ValueMax, :ValueMin, :HierarchicalValue, :IsLatenessMetric def initialize(metricname=nil, period=nil, operator=nil, value=nil, continueperiod=nil, noticefrequency=nil, ispowernotice=nil, filter=nil, description=nil, unit=nil, ruletype=nil, isadvanced=nil, isopen=nil, productid=nil, valuemax=nil, valuemin=nil, hierarchicalvalue=nil, islatenessmetric=nil) @MetricName = metricname @Period = period @Operator = operator @Value = value @ContinuePeriod = continueperiod @NoticeFrequency = noticefrequency @IsPowerNotice = ispowernotice @Filter = filter @Description = description @Unit = unit @RuleType = ruletype @IsAdvanced = isadvanced @IsOpen = isopen @ProductId = productid @ValueMax = valuemax @ValueMin = valuemin @HierarchicalValue = hierarchicalvalue @IsLatenessMetric = islatenessmetric end def deserialize(params) @MetricName = params['MetricName'] @Period = params['Period'] @Operator = params['Operator'] @Value = params['Value'] @ContinuePeriod = params['ContinuePeriod'] @NoticeFrequency = params['NoticeFrequency'] @IsPowerNotice = params['IsPowerNotice'] unless params['Filter'].nil? @Filter = AlarmPolicyFilter.new @Filter.deserialize(params['Filter']) end @Description = params['Description'] @Unit = params['Unit'] @RuleType = params['RuleType'] @IsAdvanced = params['IsAdvanced'] @IsOpen = params['IsOpen'] @ProductId = params['ProductId'] @ValueMax = params['ValueMax'] @ValueMin = params['ValueMin'] unless params['HierarchicalValue'].nil? @HierarchicalValue = AlarmHierarchicalValue.new @HierarchicalValue.deserialize(params['HierarchicalValue']) end @IsLatenessMetric = params['IsLatenessMetric'] end end # 告警策略触发任务 class AlarmPolicyTriggerTask < TencentCloud::Common::AbstractModel # @param Type: 触发任务类型 AS=弹性伸缩 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Type: String # @param TaskConfig: 用 json 表示配置信息 {"Key1":"Value1","Key2":"Value2"} # 注意:此字段可能返回 null,表示取不到有效值。 # @type TaskConfig: String attr_accessor :Type, :TaskConfig def initialize(type=nil, taskconfig=nil) @Type = type @TaskConfig = taskconfig end def deserialize(params) @Type = params['Type'] @TaskConfig = params['TaskConfig'] end end # BindPrometheusManagedGrafana请求参数结构体 class BindPrometheusManagedGrafanaRequest < TencentCloud::Common::AbstractModel # @param InstanceId: Prometheus 实例 ID # @type InstanceId: String # @param GrafanaId: Grafana 可视化服务实例 ID # @type GrafanaId: String attr_accessor :InstanceId, :GrafanaId def initialize(instanceid=nil, grafanaid=nil) @InstanceId = instanceid @GrafanaId = grafanaid end def deserialize(params) @InstanceId = params['InstanceId'] @GrafanaId = params['GrafanaId'] end end # BindPrometheusManagedGrafana返回参数结构体 class BindPrometheusManagedGrafanaResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # 策略绑定实例维度信息 class BindingPolicyObjectDimension < TencentCloud::Common::AbstractModel # @param Region: 地域名 # @type Region: String # @param RegionId: 地域ID # @type RegionId: Integer # @param Dimensions: 实例的维度信息,格式为 # {"unInstanceId":"ins-00jvv9mo"}。不同云产品的维度信息不同,详见 # [指标维度信息Dimensions列表](https://cloud.tencent.com/document/product/248/50397) # @type Dimensions: String # @param EventDimensions: 事件维度信息 # @type EventDimensions: String attr_accessor :Region, :RegionId, :Dimensions, :EventDimensions def initialize(region=nil, regionid=nil, dimensions=nil, eventdimensions=nil) @Region = region @RegionId = regionid @Dimensions = dimensions @EventDimensions = eventdimensions end def deserialize(params) @Region = params['Region'] @RegionId = params['RegionId'] @Dimensions = params['Dimensions'] @EventDimensions = params['EventDimensions'] end end # BindingPolicyObject请求参数结构体 class BindingPolicyObjectRequest < TencentCloud::Common::AbstractModel # @param Module: 必填。固定值"monitor" # @type Module: String # @param GroupId: 策略组id,例如 4739573。逐渐弃用,建议使用 PolicyId 参数 # @type GroupId: Integer # @param PolicyId: 告警策略ID,例如“policy-gh892hg0”。PolicyId 参数与 GroupId 参数至少要填一个,否则会报参数错误,建议使用该参数。若两者同时存在则以该参数为准 # @type PolicyId: String # @param InstanceGroupId: 实例分组ID # @type InstanceGroupId: Integer # @param Dimensions: 需要绑定的对象维度信息 # @type Dimensions: Array # @param EbSubject: 事件配置的告警 # @type EbSubject: String # @param EbEventFlag: 是否配置了事件告警 # @type EbEventFlag: Integer attr_accessor :Module, :GroupId, :PolicyId, :InstanceGroupId, :Dimensions, :EbSubject, :EbEventFlag def initialize(_module=nil, groupid=nil, policyid=nil, instancegroupid=nil, dimensions=nil, ebsubject=nil, ebeventflag=nil) @Module = _module @GroupId = groupid @PolicyId = policyid @InstanceGroupId = instancegroupid @Dimensions = dimensions @EbSubject = ebsubject @EbEventFlag = ebeventflag end def deserialize(params) @Module = params['Module'] @GroupId = params['GroupId'] @PolicyId = params['PolicyId'] @InstanceGroupId = params['InstanceGroupId'] unless params['Dimensions'].nil? @Dimensions = [] params['Dimensions'].each do |i| bindingpolicyobjectdimension_tmp = BindingPolicyObjectDimension.new bindingpolicyobjectdimension_tmp.deserialize(i) @Dimensions << bindingpolicyobjectdimension_tmp end end @EbSubject = params['EbSubject'] @EbEventFlag = params['EbEventFlag'] end end # BindingPolicyObject返回参数结构体 class BindingPolicyObjectResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # BindingPolicyTag请求参数结构体 class BindingPolicyTagRequest < TencentCloud::Common::AbstractModel # @param Module: 固定取值 monitor # @type Module: String # @param PolicyId: 策略ID # @type PolicyId: String # @param GroupId: 用于实例、实例组绑定和解绑接口(BindingPolicyObject、UnBindingAllPolicyObject、UnBindingPolicyObject)的策略 ID # @type GroupId: String # @param ServiceType: 产品类型 # @type ServiceType: String # @param Tag: 策略标签 # @type Tag: :class:`Tencentcloud::Monitor.v20180724.models.PolicyTag` # @param InstanceGroupId: 实例分组ID # @type InstanceGroupId: Integer # @param BatchTag: 批量绑定标签 # @type BatchTag: Array # @param EbEventFlag: 是否同步eb # @type EbEventFlag: Integer # @param EbSubject: 事件配置的告警 # @type EbSubject: String # @param TagOperation: 标识标签取交/并集关系 # @type TagOperation: String attr_accessor :Module, :PolicyId, :GroupId, :ServiceType, :Tag, :InstanceGroupId, :BatchTag, :EbEventFlag, :EbSubject, :TagOperation def initialize(_module=nil, policyid=nil, groupid=nil, servicetype=nil, tag=nil, instancegroupid=nil, batchtag=nil, ebeventflag=nil, ebsubject=nil, tagoperation=nil) @Module = _module @PolicyId = policyid @GroupId = groupid @ServiceType = servicetype @Tag = tag @InstanceGroupId = instancegroupid @BatchTag = batchtag @EbEventFlag = ebeventflag @EbSubject = ebsubject @TagOperation = tagoperation end def deserialize(params) @Module = params['Module'] @PolicyId = params['PolicyId'] @GroupId = params['GroupId'] @ServiceType = params['ServiceType'] unless params['Tag'].nil? @Tag = PolicyTag.new @Tag.deserialize(params['Tag']) end @InstanceGroupId = params['InstanceGroupId'] unless params['BatchTag'].nil? @BatchTag = [] params['BatchTag'].each do |i| policytag_tmp = PolicyTag.new policytag_tmp.deserialize(i) @BatchTag << policytag_tmp end end @EbEventFlag = params['EbEventFlag'] @EbSubject = params['EbSubject'] @TagOperation = params['TagOperation'] end end # BindingPolicyTag返回参数结构体 class BindingPolicyTagResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # 告警通知中的推送CLS操作 class CLSNotice < TencentCloud::Common::AbstractModel # @param Region: 地域 # @type Region: String # @param LogSetId: 日志集Id # @type LogSetId: String # @param TopicId: 主题Id # @type TopicId: String # @param Enable: 启停状态,可不传,默认启用。0=停用,1=启用 # @type Enable: Integer attr_accessor :Region, :LogSetId, :TopicId, :Enable def initialize(region=nil, logsetid=nil, topicid=nil, enable=nil) @Region = region @LogSetId = logsetid @TopicId = topicid @Enable = enable end def deserialize(params) @Region = params['Region'] @LogSetId = params['LogSetId'] @TopicId = params['TopicId'] @Enable = params['Enable'] end end # CleanGrafanaInstance请求参数结构体 class CleanGrafanaInstanceRequest < TencentCloud::Common::AbstractModel # @param InstanceId: Grafana 实例 ID,例如:grafana-abcdefgh # @type InstanceId: String attr_accessor :InstanceId def initialize(instanceid=nil) @InstanceId = instanceid end def deserialize(params) @InstanceId = params['InstanceId'] end end # CleanGrafanaInstance返回参数结构体 class CleanGrafanaInstanceResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # 统一的命名空间信息 class CommonNamespace < TencentCloud::Common::AbstractModel # @param Id: 命名空间标示 # @type Id: String # @param Name: 命名空间名称 # @type Name: String # @param Value: 命名空间值 # @type Value: String # @param ProductName: 产品名称 # @type ProductName: String # @param Config: 配置信息 # @type Config: String # @param AvailableRegions: 支持地域列表 # @type AvailableRegions: Array # @param SortId: 排序Id # @type SortId: Integer # @param DashboardId: Dashboard中的唯一表示 # @type DashboardId: String attr_accessor :Id, :Name, :Value, :ProductName, :Config, :AvailableRegions, :SortId, :DashboardId def initialize(id=nil, name=nil, value=nil, productname=nil, config=nil, availableregions=nil, sortid=nil, dashboardid=nil) @Id = id @Name = name @Value = value @ProductName = productname @Config = config @AvailableRegions = availableregions @SortId = sortid @DashboardId = dashboardid end def deserialize(params) @Id = params['Id'] @Name = params['Name'] @Value = params['Value'] @ProductName = params['ProductName'] @Config = params['Config'] @AvailableRegions = params['AvailableRegions'] @SortId = params['SortId'] @DashboardId = params['DashboardId'] end end # 策略类型信息 class CommonNamespaceNew < TencentCloud::Common::AbstractModel # @param Id: 命名空间标示 # @type Id: String # @param Name: 命名空间名称 # @type Name: String # @param MonitorType: 监控类型 # @type MonitorType: String # @param Dimensions: 维度信息 # @type Dimensions: Array attr_accessor :Id, :Name, :MonitorType, :Dimensions def initialize(id=nil, name=nil, monitortype=nil, dimensions=nil) @Id = id @Name = name @MonitorType = monitortype @Dimensions = dimensions end def deserialize(params) @Id = params['Id'] @Name = params['Name'] @MonitorType = params['MonitorType'] unless params['Dimensions'].nil? @Dimensions = [] params['Dimensions'].each do |i| dimensionnew_tmp = DimensionNew.new dimensionnew_tmp.deserialize(i) @Dimensions << dimensionnew_tmp end end end end # 告警条件 class Condition < TencentCloud::Common::AbstractModel # @param AlarmNotifyPeriod: 告警通知频率 # @type AlarmNotifyPeriod: Integer # @param AlarmNotifyType: 重复通知策略预定义(0 - 只告警一次, 1 - 指数告警,2 - 连接告警) # @type AlarmNotifyType: Integer # @param CalcType: 检测方式 # 注意:此字段可能返回 null,表示取不到有效值。 # @type CalcType: String # @param CalcValue: 检测值 # 注意:此字段可能返回 null,表示取不到有效值。 # @type CalcValue: String # @param ContinueTime: 持续时间,单位秒 # 注意:此字段可能返回 null,表示取不到有效值。 # @type ContinueTime: String # @param MetricID: 指标ID # @type MetricID: Integer # @param MetricDisplayName: 指标展示名称(对外) # @type MetricDisplayName: String # @param Period: 周期 # @type Period: Integer # @param RuleID: 规则ID # @type RuleID: Integer # @param Unit: 指标单位 # @type Unit: String # @param IsAdvanced: 是否为高级指标,0:否;1:是 # @type IsAdvanced: Integer # @param IsOpen: 是否开通高级指标,0:否;1:是 # @type IsOpen: Integer # @param ProductId: 产品ID # 注意:此字段可能返回 null,表示取不到有效值。 # @type ProductId: String # @param HierarchicalValue: 告警分级阈值配置 # 注意:此字段可能返回 null,表示取不到有效值。 # @type HierarchicalValue: :class:`Tencentcloud::Monitor.v20180724.models.AlarmHierarchicalValue` attr_accessor :AlarmNotifyPeriod, :AlarmNotifyType, :CalcType, :CalcValue, :ContinueTime, :MetricID, :MetricDisplayName, :Period, :RuleID, :Unit, :IsAdvanced, :IsOpen, :ProductId, :HierarchicalValue def initialize(alarmnotifyperiod=nil, alarmnotifytype=nil, calctype=nil, calcvalue=nil, continuetime=nil, metricid=nil, metricdisplayname=nil, period=nil, ruleid=nil, unit=nil, isadvanced=nil, isopen=nil, productid=nil, hierarchicalvalue=nil) @AlarmNotifyPeriod = alarmnotifyperiod @AlarmNotifyType = alarmnotifytype @CalcType = calctype @CalcValue = calcvalue @ContinueTime = continuetime @MetricID = metricid @MetricDisplayName = metricdisplayname @Period = period @RuleID = ruleid @Unit = unit @IsAdvanced = isadvanced @IsOpen = isopen @ProductId = productid @HierarchicalValue = hierarchicalvalue end def deserialize(params) @AlarmNotifyPeriod = params['AlarmNotifyPeriod'] @AlarmNotifyType = params['AlarmNotifyType'] @CalcType = params['CalcType'] @CalcValue = params['CalcValue'] @ContinueTime = params['ContinueTime'] @MetricID = params['MetricID'] @MetricDisplayName = params['MetricDisplayName'] @Period = params['Period'] @RuleID = params['RuleID'] @Unit = params['Unit'] @IsAdvanced = params['IsAdvanced'] @IsOpen = params['IsOpen'] @ProductId = params['ProductId'] unless params['HierarchicalValue'].nil? @HierarchicalValue = AlarmHierarchicalValue.new @HierarchicalValue.deserialize(params['HierarchicalValue']) end end end # 告警条件模板 class ConditionsTemp < TencentCloud::Common::AbstractModel # @param TemplateName: 模板名称 # 注意:此字段可能返回 null,表示取不到有效值。 # @type TemplateName: String # @param Condition: 指标触发条件 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Condition: :class:`Tencentcloud::Monitor.v20180724.models.AlarmPolicyCondition` # @param EventCondition: 事件触发条件 # 注意:此字段可能返回 null,表示取不到有效值。 # @type EventCondition: :class:`Tencentcloud::Monitor.v20180724.models.AlarmPolicyEventCondition` attr_accessor :TemplateName, :Condition, :EventCondition def initialize(templatename=nil, condition=nil, eventcondition=nil) @TemplateName = templatename @Condition = condition @EventCondition = eventcondition end def deserialize(params) @TemplateName = params['TemplateName'] unless params['Condition'].nil? @Condition = AlarmPolicyCondition.new @Condition.deserialize(params['Condition']) end unless params['EventCondition'].nil? @EventCondition = AlarmPolicyEventCondition.new @EventCondition.deserialize(params['EventCondition']) end end end # CreateAlarmNotice请求参数结构体 class CreateAlarmNoticeRequest < TencentCloud::Common::AbstractModel # @param Module: 模块名,这里填“monitor” # @type Module: String # @param Name: 通知模板名称 60字符以内 # @type Name: String # @param NoticeType: 通知类型 ALARM=未恢复通知 OK=已恢复通知 ALL=都通知 # @type NoticeType: String # @param NoticeLanguage: 通知语言 zh-CN=中文 en-US=英文 # @type NoticeLanguage: String # @param UserNotices: 用户通知 最多5个 # @type UserNotices: Array # @param URLNotices: 回调通知 最多6个 # @type URLNotices: Array # @param CLSNotices: 推送CLS日志服务的操作 最多1个 # @type CLSNotices: Array # @param Tags: 模板绑定的标签 # @type Tags: Array attr_accessor :Module, :Name, :NoticeType, :NoticeLanguage, :UserNotices, :URLNotices, :CLSNotices, :Tags def initialize(_module=nil, name=nil, noticetype=nil, noticelanguage=nil, usernotices=nil, urlnotices=nil, clsnotices=nil, tags=nil) @Module = _module @Name = name @NoticeType = noticetype @NoticeLanguage = noticelanguage @UserNotices = usernotices @URLNotices = urlnotices @CLSNotices = clsnotices @Tags = tags end def deserialize(params) @Module = params['Module'] @Name = params['Name'] @NoticeType = params['NoticeType'] @NoticeLanguage = params['NoticeLanguage'] unless params['UserNotices'].nil? @UserNotices = [] params['UserNotices'].each do |i| usernotice_tmp = UserNotice.new usernotice_tmp.deserialize(i) @UserNotices << usernotice_tmp end end unless params['URLNotices'].nil? @URLNotices = [] params['URLNotices'].each do |i| urlnotice_tmp = URLNotice.new urlnotice_tmp.deserialize(i) @URLNotices << urlnotice_tmp end end unless params['CLSNotices'].nil? @CLSNotices = [] params['CLSNotices'].each do |i| clsnotice_tmp = CLSNotice.new clsnotice_tmp.deserialize(i) @CLSNotices << clsnotice_tmp end end unless params['Tags'].nil? @Tags = [] params['Tags'].each do |i| tag_tmp = Tag.new tag_tmp.deserialize(i) @Tags << tag_tmp end end end end # CreateAlarmNotice返回参数结构体 class CreateAlarmNoticeResponse < TencentCloud::Common::AbstractModel # @param NoticeId: 告警通知模板ID # @type NoticeId: String # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :NoticeId, :RequestId def initialize(noticeid=nil, requestid=nil) @NoticeId = noticeid @RequestId = requestid end def deserialize(params) @NoticeId = params['NoticeId'] @RequestId = params['RequestId'] end end # CreateAlarmPolicy请求参数结构体 class CreateAlarmPolicyRequest < TencentCloud::Common::AbstractModel # @param Module: 固定值,为"monitor" # @type Module: String # @param PolicyName: 策略名称,不超过60字符 # @type PolicyName: String # @param MonitorType: 监控类型 MT_QCE=云产品监控 # @type MonitorType: String # @param Namespace: 告警策略类型,由 [DescribeAllNamespaces](https://cloud.tencent.com/document/product/248/48683) 获得。对于云产品监控,取接口出参的 QceNamespacesNew.N.Id,例如 cvm_device # @type Namespace: String # @param Remark: 备注,不超过100字符,仅支持中英文、数字、下划线、- # @type Remark: String # @param Enable: 是否启用 0=停用 1=启用,可不传 默认为1 # @type Enable: Integer # @param ProjectId: 项目 Id,对于区分项目的产品必须传入非 -1 的值。 -1=无项目 0=默认项目,如不传 默认为 -1。支持的项目 Id 可以在控制台 [账号中心-项目管理](https://console.cloud.tencent.com/project) 中查看。 # @type ProjectId: Integer # @param ConditionTemplateId: 触发条件模板 Id,该参数与 Condition 参数二选一。如果策略绑定触发条件模板,则传该参数;否则不传该参数,而是传 Condition 参数。触发条件模板 Id 可以从 [DescribeConditionsTemplateList](https://cloud.tencent.com/document/api/248/70250) 接口获取。 # @type ConditionTemplateId: Integer # @param Condition: 指标触发条件,支持的指标可以从 [DescribeAlarmMetrics](https://cloud.tencent.com/document/product/248/51283) 查询。 # @type Condition: :class:`Tencentcloud::Monitor.v20180724.models.AlarmPolicyCondition` # @param EventCondition: 事件触发条件,支持的事件可以从 [DescribeAlarmEvents](https://cloud.tencent.com/document/product/248/51284) 查询。 # @type EventCondition: :class:`Tencentcloud::Monitor.v20180724.models.AlarmPolicyEventCondition` # @param NoticeIds: 通知规则 Id 列表,由 [DescribeAlarmNotices](https://cloud.tencent.com/document/product/248/51280) 获得 # @type NoticeIds: Array # @param TriggerTasks: 触发任务列表 # @type TriggerTasks: Array # @param Filter: 全局过滤条件 # @type Filter: :class:`Tencentcloud::Monitor.v20180724.models.AlarmPolicyFilter` # @param GroupBy: 聚合维度列表,指定按哪些维度 key 来做 group by # @type GroupBy: Array # @param Tags: 模板绑定的标签 # @type Tags: Array # @param LogAlarmReqInfo: 日志告警信息 # @type LogAlarmReqInfo: :class:`Tencentcloud::Monitor.v20180724.models.LogAlarmReq` # @param HierarchicalNotices: 告警分级通知规则配置 # @type HierarchicalNotices: Array # @param MigrateFlag: 迁移策略专用字段,0-走鉴权逻辑,1-跳过鉴权逻辑 # @type MigrateFlag: Integer # @param EbSubject: 事件配置的告警 # @type EbSubject: String attr_accessor :Module, :PolicyName, :MonitorType, :Namespace, :Remark, :Enable, :ProjectId, :ConditionTemplateId, :Condition, :EventCondition, :NoticeIds, :TriggerTasks, :Filter, :GroupBy, :Tags, :LogAlarmReqInfo, :HierarchicalNotices, :MigrateFlag, :EbSubject def initialize(_module=nil, policyname=nil, monitortype=nil, namespace=nil, remark=nil, enable=nil, projectid=nil, conditiontemplateid=nil, condition=nil, eventcondition=nil, noticeids=nil, triggertasks=nil, filter=nil, groupby=nil, tags=nil, logalarmreqinfo=nil, hierarchicalnotices=nil, migrateflag=nil, ebsubject=nil) @Module = _module @PolicyName = policyname @MonitorType = monitortype @Namespace = namespace @Remark = remark @Enable = enable @ProjectId = projectid @ConditionTemplateId = conditiontemplateid @Condition = condition @EventCondition = eventcondition @NoticeIds = noticeids @TriggerTasks = triggertasks @Filter = filter @GroupBy = groupby @Tags = tags @LogAlarmReqInfo = logalarmreqinfo @HierarchicalNotices = hierarchicalnotices @MigrateFlag = migrateflag @EbSubject = ebsubject end def deserialize(params) @Module = params['Module'] @PolicyName = params['PolicyName'] @MonitorType = params['MonitorType'] @Namespace = params['Namespace'] @Remark = params['Remark'] @Enable = params['Enable'] @ProjectId = params['ProjectId'] @ConditionTemplateId = params['ConditionTemplateId'] unless params['Condition'].nil? @Condition = AlarmPolicyCondition.new @Condition.deserialize(params['Condition']) end unless params['EventCondition'].nil? @EventCondition = AlarmPolicyEventCondition.new @EventCondition.deserialize(params['EventCondition']) end @NoticeIds = params['NoticeIds'] unless params['TriggerTasks'].nil? @TriggerTasks = [] params['TriggerTasks'].each do |i| alarmpolicytriggertask_tmp = AlarmPolicyTriggerTask.new alarmpolicytriggertask_tmp.deserialize(i) @TriggerTasks << alarmpolicytriggertask_tmp end end unless params['Filter'].nil? @Filter = AlarmPolicyFilter.new @Filter.deserialize(params['Filter']) end @GroupBy = params['GroupBy'] unless params['Tags'].nil? @Tags = [] params['Tags'].each do |i| tag_tmp = Tag.new tag_tmp.deserialize(i) @Tags << tag_tmp end end unless params['LogAlarmReqInfo'].nil? @LogAlarmReqInfo = LogAlarmReq.new @LogAlarmReqInfo.deserialize(params['LogAlarmReqInfo']) end unless params['HierarchicalNotices'].nil? @HierarchicalNotices = [] params['HierarchicalNotices'].each do |i| alarmhierarchicalnotice_tmp = AlarmHierarchicalNotice.new alarmhierarchicalnotice_tmp.deserialize(i) @HierarchicalNotices << alarmhierarchicalnotice_tmp end end @MigrateFlag = params['MigrateFlag'] @EbSubject = params['EbSubject'] end end # CreateAlarmPolicy返回参数结构体 class CreateAlarmPolicyResponse < TencentCloud::Common::AbstractModel # @param PolicyId: 告警策略 ID # @type PolicyId: String # @param OriginId: 可用于实例、实例组的绑定和解绑接口([BindingPolicyObject](https://cloud.tencent.com/document/product/248/40421)、[UnBindingAllPolicyObject](https://cloud.tencent.com/document/product/248/40568)、[UnBindingPolicyObject](https://cloud.tencent.com/document/product/248/40567))的策略 ID # @type OriginId: String # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :PolicyId, :OriginId, :RequestId def initialize(policyid=nil, originid=nil, requestid=nil) @PolicyId = policyid @OriginId = originid @RequestId = requestid end def deserialize(params) @PolicyId = params['PolicyId'] @OriginId = params['OriginId'] @RequestId = params['RequestId'] end end # CreateAlertRule请求参数结构体 class CreateAlertRuleRequest < TencentCloud::Common::AbstractModel # @param InstanceId: Prometheus 实例 ID,例如:prom-abcd1234 # @type InstanceId: String # @param RuleName: 规则名称 # @type RuleName: String # @param Expr: 规则表达式,可参考告警规则说明 # @type Expr: String # @param Receivers: 告警通知模板 ID 列表 # @type Receivers: Array # @param RuleState: 规则状态码,取值如下: #
  • 2=RuleEnabled
  • #
  • 3=RuleDisabled
  • # @type RuleState: Integer # @param Duration: 规则报警持续时间 # @type Duration: String # @param Labels: 标签列表 # @type Labels: Array # @param Annotations: 注释列表。 # 告警对象和告警消息是 Prometheus Rule Annotations 的特殊字段,需要通过 annotations 来传递,对应的 Key 分别为summary/description。 # @type Annotations: Array # @param Type: 报警策略模板分类 # @type Type: String attr_accessor :InstanceId, :RuleName, :Expr, :Receivers, :RuleState, :Duration, :Labels, :Annotations, :Type def initialize(instanceid=nil, rulename=nil, expr=nil, receivers=nil, rulestate=nil, duration=nil, labels=nil, annotations=nil, type=nil) @InstanceId = instanceid @RuleName = rulename @Expr = expr @Receivers = receivers @RuleState = rulestate @Duration = duration @Labels = labels @Annotations = annotations @Type = type end def deserialize(params) @InstanceId = params['InstanceId'] @RuleName = params['RuleName'] @Expr = params['Expr'] @Receivers = params['Receivers'] @RuleState = params['RuleState'] @Duration = params['Duration'] unless params['Labels'].nil? @Labels = [] params['Labels'].each do |i| prometheusrulekv_tmp = PrometheusRuleKV.new prometheusrulekv_tmp.deserialize(i) @Labels << prometheusrulekv_tmp end end unless params['Annotations'].nil? @Annotations = [] params['Annotations'].each do |i| prometheusrulekv_tmp = PrometheusRuleKV.new prometheusrulekv_tmp.deserialize(i) @Annotations << prometheusrulekv_tmp end end @Type = params['Type'] end end # CreateAlertRule返回参数结构体 class CreateAlertRuleResponse < TencentCloud::Common::AbstractModel # @param RuleId: 规则 ID # 注意:此字段可能返回 null,表示取不到有效值。 # @type RuleId: String # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RuleId, :RequestId def initialize(ruleid=nil, requestid=nil) @RuleId = ruleid @RequestId = requestid end def deserialize(params) @RuleId = params['RuleId'] @RequestId = params['RequestId'] end end # CreateExporterIntegration请求参数结构体 class CreateExporterIntegrationRequest < TencentCloud::Common::AbstractModel # @param InstanceId: 实例 ID # @type InstanceId: String # @param Kind: 类型(可通过 DescribePrometheusIntegrations 接口获取,取每一项中的 ExporterType 字段) # @type Kind: String # @param Content: 集成配置 # @type Content: String # @param KubeType: Kubernetes 集群类型,可不填,取值如下: #
  • 1= 容器集群(TKE)
  • #
  • 2=弹性集群(EKS)
  • #
  • 3= Prometheus管理的弹性集群(MEKS)
  • # @type KubeType: Integer # @param ClusterId: 集群 ID,可不填 # @type ClusterId: String attr_accessor :InstanceId, :Kind, :Content, :KubeType, :ClusterId def initialize(instanceid=nil, kind=nil, content=nil, kubetype=nil, clusterid=nil) @InstanceId = instanceid @Kind = kind @Content = content @KubeType = kubetype @ClusterId = clusterid end def deserialize(params) @InstanceId = params['InstanceId'] @Kind = params['Kind'] @Content = params['Content'] @KubeType = params['KubeType'] @ClusterId = params['ClusterId'] end end # CreateExporterIntegration返回参数结构体 class CreateExporterIntegrationResponse < TencentCloud::Common::AbstractModel # @param Names: 返回创建成功的集成名称列表 # @type Names: Array # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Names, :RequestId def initialize(names=nil, requestid=nil) @Names = names @RequestId = requestid end def deserialize(params) @Names = params['Names'] @RequestId = params['RequestId'] end end # CreateGrafanaInstance请求参数结构体 class CreateGrafanaInstanceRequest < TencentCloud::Common::AbstractModel # @param InstanceName: 实例名 # @type InstanceName: String # @param VpcId: VPC ID (私有网络 ID) # @type VpcId: String # @param SubnetIds: 子网 ID 数组(VPC ID下的子网 ID,只取第一个) # @type SubnetIds: Array # @param EnableInternet: 是否启用外网 # @type EnableInternet: Boolean # @param GrafanaInitPassword: Grafana 初始密码(国际站用户必填,国内站用户可不填,不填时会生成随机密码并给主账号发送通知) # @type GrafanaInitPassword: String # @param TagSpecification: 标签 # @type TagSpecification: Array # @param AutoVoucher: 是否自动选择代金券,默认为 false # @type AutoVoucher: Boolean attr_accessor :InstanceName, :VpcId, :SubnetIds, :EnableInternet, :GrafanaInitPassword, :TagSpecification, :AutoVoucher def initialize(instancename=nil, vpcid=nil, subnetids=nil, enableinternet=nil, grafanainitpassword=nil, tagspecification=nil, autovoucher=nil) @InstanceName = instancename @VpcId = vpcid @SubnetIds = subnetids @EnableInternet = enableinternet @GrafanaInitPassword = grafanainitpassword @TagSpecification = tagspecification @AutoVoucher = autovoucher end def deserialize(params) @InstanceName = params['InstanceName'] @VpcId = params['VpcId'] @SubnetIds = params['SubnetIds'] @EnableInternet = params['EnableInternet'] @GrafanaInitPassword = params['GrafanaInitPassword'] unless params['TagSpecification'].nil? @TagSpecification = [] params['TagSpecification'].each do |i| prometheustag_tmp = PrometheusTag.new prometheustag_tmp.deserialize(i) @TagSpecification << prometheustag_tmp end end @AutoVoucher = params['AutoVoucher'] end end # CreateGrafanaInstance返回参数结构体 class CreateGrafanaInstanceResponse < TencentCloud::Common::AbstractModel # @param InstanceId: 实例名 # @type InstanceId: String # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :InstanceId, :RequestId def initialize(instanceid=nil, requestid=nil) @InstanceId = instanceid @RequestId = requestid end def deserialize(params) @InstanceId = params['InstanceId'] @RequestId = params['RequestId'] end end # CreateGrafanaIntegration请求参数结构体 class CreateGrafanaIntegrationRequest < TencentCloud::Common::AbstractModel # @param InstanceId: Grafana 实例 ID,例如:grafana-abcdefgh # @type InstanceId: String # @param Kind: 集成类型(接口DescribeGrafanaIntegrationOverviews返回的集成信息中的Code字段) # @type Kind: String # @param Content: 集成配置 # @type Content: String attr_accessor :InstanceId, :Kind, :Content def initialize(instanceid=nil, kind=nil, content=nil) @InstanceId = instanceid @Kind = kind @Content = content end def deserialize(params) @InstanceId = params['InstanceId'] @Kind = params['Kind'] @Content = params['Content'] end end # CreateGrafanaIntegration返回参数结构体 class CreateGrafanaIntegrationResponse < TencentCloud::Common::AbstractModel # @param IntegrationId: 集成 ID # 注意:此字段可能返回 null,表示取不到有效值。 # @type IntegrationId: String # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :IntegrationId, :RequestId def initialize(integrationid=nil, requestid=nil) @IntegrationId = integrationid @RequestId = requestid end def deserialize(params) @IntegrationId = params['IntegrationId'] @RequestId = params['RequestId'] end end # CreateGrafanaNotificationChannel请求参数结构体 class CreateGrafanaNotificationChannelRequest < TencentCloud::Common::AbstractModel # @param InstanceId: Grafana 实例 ID,例如:grafana-abcdefgh # @type InstanceId: String # @param ChannelName: 告警通道名称,例如:test # @type ChannelName: String # @param Receivers: 接受告警通道 ID 数组,值为告警管理/基础配置/通知模板中的模板 ID # @type Receivers: Array # @param OrgId: 默认为1,建议使用 OrganizationIds # @type OrgId: Integer # @param ExtraOrgIds: 额外组织 ID 数组,已废弃,请使用 OrganizationIds # @type ExtraOrgIds: Array # @param OrganizationIds: 生效的所有组织 ID 数组,默认为 ["1"] # @type OrganizationIds: Array attr_accessor :InstanceId, :ChannelName, :Receivers, :OrgId, :ExtraOrgIds, :OrganizationIds def initialize(instanceid=nil, channelname=nil, receivers=nil, orgid=nil, extraorgids=nil, organizationids=nil) @InstanceId = instanceid @ChannelName = channelname @Receivers = receivers @OrgId = orgid @ExtraOrgIds = extraorgids @OrganizationIds = organizationids end def deserialize(params) @InstanceId = params['InstanceId'] @ChannelName = params['ChannelName'] @Receivers = params['Receivers'] @OrgId = params['OrgId'] @ExtraOrgIds = params['ExtraOrgIds'] @OrganizationIds = params['OrganizationIds'] end end # CreateGrafanaNotificationChannel返回参数结构体 class CreateGrafanaNotificationChannelResponse < TencentCloud::Common::AbstractModel # @param ChannelId: 通道 ID # 注意:此字段可能返回 null,表示取不到有效值。 # @type ChannelId: String # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :ChannelId, :RequestId def initialize(channelid=nil, requestid=nil) @ChannelId = channelid @RequestId = requestid end def deserialize(params) @ChannelId = params['ChannelId'] @RequestId = params['RequestId'] end end # 创建策略传入的阈值告警条件 class CreatePolicyGroupCondition < TencentCloud::Common::AbstractModel # @param MetricId: 指标Id # @type MetricId: Integer # @param AlarmNotifyType: 告警发送收敛类型。0连续告警,1指数告警 # @type AlarmNotifyType: Integer # @param AlarmNotifyPeriod: 告警发送周期单位秒。<0 不触发, 0 只触发一次, >0 每隔triggerTime秒触发一次 # @type AlarmNotifyPeriod: Integer # @param CalcType: 比较类型,1表示大于,2表示大于等于,3表示小于,4表示小于等于,5表示相等,6表示不相等。如果指标有配置默认比较类型值可以不填。 # @type CalcType: Integer # @param CalcValue: 比较的值,如果指标不必须CalcValue可不填 # @type CalcValue: Float # @param CalcPeriod: 数据聚合周期(单位秒),若指标有默认值可不填 # @type CalcPeriod: Integer # @param ContinuePeriod: 持续几个检测周期触发规则会告警 # @type ContinuePeriod: Integer # @param RuleId: 如果通过模板创建,需要传入模板中该指标的对应RuleId # @type RuleId: Integer attr_accessor :MetricId, :AlarmNotifyType, :AlarmNotifyPeriod, :CalcType, :CalcValue, :CalcPeriod, :ContinuePeriod, :RuleId def initialize(metricid=nil, alarmnotifytype=nil, alarmnotifyperiod=nil, calctype=nil, calcvalue=nil, calcperiod=nil, continueperiod=nil, ruleid=nil) @MetricId = metricid @AlarmNotifyType = alarmnotifytype @AlarmNotifyPeriod = alarmnotifyperiod @CalcType = calctype @CalcValue = calcvalue @CalcPeriod = calcperiod @ContinuePeriod = continueperiod @RuleId = ruleid end def deserialize(params) @MetricId = params['MetricId'] @AlarmNotifyType = params['AlarmNotifyType'] @AlarmNotifyPeriod = params['AlarmNotifyPeriod'] @CalcType = params['CalcType'] @CalcValue = params['CalcValue'] @CalcPeriod = params['CalcPeriod'] @ContinuePeriod = params['ContinuePeriod'] @RuleId = params['RuleId'] end end # 创建策略传入的事件告警条件 class CreatePolicyGroupEventCondition < TencentCloud::Common::AbstractModel # @param EventId: 告警事件的Id # @type EventId: Integer # @param AlarmNotifyType: 告警发送收敛类型。0连续告警,1指数告警 # @type AlarmNotifyType: Integer # @param AlarmNotifyPeriod: 告警发送周期单位秒。<0 不触发, 0 只触发一次, >0 每隔triggerTime秒触发一次 # @type AlarmNotifyPeriod: Integer # @param RuleId: 如果通过模板创建,需要传入模板中该指标的对应RuleId # @type RuleId: Integer attr_accessor :EventId, :AlarmNotifyType, :AlarmNotifyPeriod, :RuleId def initialize(eventid=nil, alarmnotifytype=nil, alarmnotifyperiod=nil, ruleid=nil) @EventId = eventid @AlarmNotifyType = alarmnotifytype @AlarmNotifyPeriod = alarmnotifyperiod @RuleId = ruleid end def deserialize(params) @EventId = params['EventId'] @AlarmNotifyType = params['AlarmNotifyType'] @AlarmNotifyPeriod = params['AlarmNotifyPeriod'] @RuleId = params['RuleId'] end end # CreatePolicyGroup请求参数结构体 class CreatePolicyGroupRequest < TencentCloud::Common::AbstractModel # @param GroupName: 组策略名称 # @type GroupName: String # @param Module: 固定值,为"monitor" # @type Module: String # @param ViewName: 策略组所属视图的名称,若通过模板创建,可不传入 # @type ViewName: String # @param ProjectId: 策略组所属项目Id,会进行鉴权操作 # @type ProjectId: Integer # @param ConditionTempGroupId: 模板策略组Id, 通过模板创建时才需要传 # @type ConditionTempGroupId: Integer # @param IsShielded: 是否屏蔽策略组,0表示不屏蔽,1表示屏蔽。不填默认为0 # @type IsShielded: Integer # @param Remark: 策略组的备注信息 # @type Remark: String # @param InsertTime: 插入时间,戳格式为Unix时间戳,不填则按后台处理时间填充 # @type InsertTime: Integer # @param Conditions: 策略组中的阈值告警规则 # @type Conditions: Array # @param EventConditions: 策略组中的事件告警规则 # @type EventConditions: Array # @param BackEndCall: 是否为后端调用。当且仅当值为1时,后台拉取策略模板中的规则填充入Conditions以及EventConditions字段 # @type BackEndCall: Integer # @param IsUnionRule: 指标告警规则的且或关系,0表示或规则(满足任意规则就告警),1表示且规则(满足所有规则才告警) # @type IsUnionRule: Integer attr_accessor :GroupName, :Module, :ViewName, :ProjectId, :ConditionTempGroupId, :IsShielded, :Remark, :InsertTime, :Conditions, :EventConditions, :BackEndCall, :IsUnionRule def initialize(groupname=nil, _module=nil, viewname=nil, projectid=nil, conditiontempgroupid=nil, isshielded=nil, remark=nil, inserttime=nil, conditions=nil, eventconditions=nil, backendcall=nil, isunionrule=nil) @GroupName = groupname @Module = _module @ViewName = viewname @ProjectId = projectid @ConditionTempGroupId = conditiontempgroupid @IsShielded = isshielded @Remark = remark @InsertTime = inserttime @Conditions = conditions @EventConditions = eventconditions @BackEndCall = backendcall @IsUnionRule = isunionrule end def deserialize(params) @GroupName = params['GroupName'] @Module = params['Module'] @ViewName = params['ViewName'] @ProjectId = params['ProjectId'] @ConditionTempGroupId = params['ConditionTempGroupId'] @IsShielded = params['IsShielded'] @Remark = params['Remark'] @InsertTime = params['InsertTime'] unless params['Conditions'].nil? @Conditions = [] params['Conditions'].each do |i| createpolicygroupcondition_tmp = CreatePolicyGroupCondition.new createpolicygroupcondition_tmp.deserialize(i) @Conditions << createpolicygroupcondition_tmp end end unless params['EventConditions'].nil? @EventConditions = [] params['EventConditions'].each do |i| createpolicygroupeventcondition_tmp = CreatePolicyGroupEventCondition.new createpolicygroupeventcondition_tmp.deserialize(i) @EventConditions << createpolicygroupeventcondition_tmp end end @BackEndCall = params['BackEndCall'] @IsUnionRule = params['IsUnionRule'] end end # CreatePolicyGroup返回参数结构体 class CreatePolicyGroupResponse < TencentCloud::Common::AbstractModel # @param GroupId: 创建成功的策略组Id # @type GroupId: Integer # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :GroupId, :RequestId def initialize(groupid=nil, requestid=nil) @GroupId = groupid @RequestId = requestid end def deserialize(params) @GroupId = params['GroupId'] @RequestId = params['RequestId'] end end # CreatePrometheusAgent请求参数结构体 class CreatePrometheusAgentRequest < TencentCloud::Common::AbstractModel # @param InstanceId: 实例 ID # @type InstanceId: String # @param Name: Agent 名称 # @type Name: String attr_accessor :InstanceId, :Name def initialize(instanceid=nil, name=nil) @InstanceId = instanceid @Name = name end def deserialize(params) @InstanceId = params['InstanceId'] @Name = params['Name'] end end # CreatePrometheusAgent返回参数结构体 class CreatePrometheusAgentResponse < TencentCloud::Common::AbstractModel # @param AgentId: 创建成功的 Agent Id # @type AgentId: String # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :AgentId, :RequestId def initialize(agentid=nil, requestid=nil) @AgentId = agentid @RequestId = requestid end def deserialize(params) @AgentId = params['AgentId'] @RequestId = params['RequestId'] end end # CreatePrometheusAlertGroup请求参数结构体 class CreatePrometheusAlertGroupRequest < TencentCloud::Common::AbstractModel # @param InstanceId: prometheus实例ID # @type InstanceId: String # @param GroupName: 告警分组名称,不能与其他告警分组重名 # @type GroupName: String # @param GroupState: 告警分组状态: # 2 -- 启用 # 3 -- 禁用 # 不为空时会覆盖 `Rules`字段下所有告警规则状态 # @type GroupState: Integer # @param AMPReceivers: 云监控告警通知模板ID列表,形如Consumer-xxxx或notice-xxxx # @type AMPReceivers: Array # @param CustomReceiver: 自定义告警通知模板 # @type CustomReceiver: :class:`Tencentcloud::Monitor.v20180724.models.PrometheusAlertCustomReceiver` # @param RepeatInterval: 告警通知周期(收敛时间),为空默认1h # @type RepeatInterval: String # @param Rules: 要创建的告警规则列表 # @type Rules: Array attr_accessor :InstanceId, :GroupName, :GroupState, :AMPReceivers, :CustomReceiver, :RepeatInterval, :Rules def initialize(instanceid=nil, groupname=nil, groupstate=nil, ampreceivers=nil, customreceiver=nil, repeatinterval=nil, rules=nil) @InstanceId = instanceid @GroupName = groupname @GroupState = groupstate @AMPReceivers = ampreceivers @CustomReceiver = customreceiver @RepeatInterval = repeatinterval @Rules = rules end def deserialize(params) @InstanceId = params['InstanceId'] @GroupName = params['GroupName'] @GroupState = params['GroupState'] @AMPReceivers = params['AMPReceivers'] unless params['CustomReceiver'].nil? @CustomReceiver = PrometheusAlertCustomReceiver.new @CustomReceiver.deserialize(params['CustomReceiver']) end @RepeatInterval = params['RepeatInterval'] unless params['Rules'].nil? @Rules = [] params['Rules'].each do |i| prometheusalertgroupruleset_tmp = PrometheusAlertGroupRuleSet.new prometheusalertgroupruleset_tmp.deserialize(i) @Rules << prometheusalertgroupruleset_tmp end end end end # CreatePrometheusAlertGroup返回参数结构体 class CreatePrometheusAlertGroupResponse < TencentCloud::Common::AbstractModel # @param GroupId: 创建的告警分组ID,满足正则表达式`alert-[a-z0-9]{8}` # @type GroupId: String # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :GroupId, :RequestId def initialize(groupid=nil, requestid=nil) @GroupId = groupid @RequestId = requestid end def deserialize(params) @GroupId = params['GroupId'] @RequestId = params['RequestId'] end end # CreatePrometheusAlertPolicy请求参数结构体 class CreatePrometheusAlertPolicyRequest < TencentCloud::Common::AbstractModel # @param InstanceId: 实例id # @type InstanceId: String # @param AlertRule: 告警配置 # @type AlertRule: :class:`Tencentcloud::Monitor.v20180724.models.PrometheusAlertPolicyItem` attr_accessor :InstanceId, :AlertRule def initialize(instanceid=nil, alertrule=nil) @InstanceId = instanceid @AlertRule = alertrule end def deserialize(params) @InstanceId = params['InstanceId'] unless params['AlertRule'].nil? @AlertRule = PrometheusAlertPolicyItem.new @AlertRule.deserialize(params['AlertRule']) end end end # CreatePrometheusAlertPolicy返回参数结构体 class CreatePrometheusAlertPolicyResponse < TencentCloud::Common::AbstractModel # @param Id: 告警id # @type Id: String # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Id, :RequestId def initialize(id=nil, requestid=nil) @Id = id @RequestId = requestid end def deserialize(params) @Id = params['Id'] @RequestId = params['RequestId'] end end # CreatePrometheusClusterAgent请求参数结构体 class CreatePrometheusClusterAgentRequest < TencentCloud::Common::AbstractModel # @param InstanceId: 实例ID # @type InstanceId: String # @param Agents: agent列表 # @type Agents: Array attr_accessor :InstanceId, :Agents def initialize(instanceid=nil, agents=nil) @InstanceId = instanceid @Agents = agents end def deserialize(params) @InstanceId = params['InstanceId'] unless params['Agents'].nil? @Agents = [] params['Agents'].each do |i| prometheusclusteragentbasic_tmp = PrometheusClusterAgentBasic.new prometheusclusteragentbasic_tmp.deserialize(i) @Agents << prometheusclusteragentbasic_tmp end end end end # CreatePrometheusClusterAgent返回参数结构体 class CreatePrometheusClusterAgentResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # CreatePrometheusConfig请求参数结构体 class CreatePrometheusConfigRequest < TencentCloud::Common::AbstractModel # @param InstanceId: 实例id # @type InstanceId: String # @param ClusterType: 集群类型 # @type ClusterType: String # @param ClusterId: 集群id # @type ClusterId: String # @param ServiceMonitors: ServiceMonitors配置 # @type ServiceMonitors: Array # @param PodMonitors: PodMonitors配置 # @type PodMonitors: Array # @param RawJobs: prometheus原生Job配置 # @type RawJobs: Array attr_accessor :InstanceId, :ClusterType, :ClusterId, :ServiceMonitors, :PodMonitors, :RawJobs def initialize(instanceid=nil, clustertype=nil, clusterid=nil, servicemonitors=nil, podmonitors=nil, rawjobs=nil) @InstanceId = instanceid @ClusterType = clustertype @ClusterId = clusterid @ServiceMonitors = servicemonitors @PodMonitors = podmonitors @RawJobs = rawjobs end def deserialize(params) @InstanceId = params['InstanceId'] @ClusterType = params['ClusterType'] @ClusterId = params['ClusterId'] unless params['ServiceMonitors'].nil? @ServiceMonitors = [] params['ServiceMonitors'].each do |i| prometheusconfigitem_tmp = PrometheusConfigItem.new prometheusconfigitem_tmp.deserialize(i) @ServiceMonitors << prometheusconfigitem_tmp end end unless params['PodMonitors'].nil? @PodMonitors = [] params['PodMonitors'].each do |i| prometheusconfigitem_tmp = PrometheusConfigItem.new prometheusconfigitem_tmp.deserialize(i) @PodMonitors << prometheusconfigitem_tmp end end unless params['RawJobs'].nil? @RawJobs = [] params['RawJobs'].each do |i| prometheusconfigitem_tmp = PrometheusConfigItem.new prometheusconfigitem_tmp.deserialize(i) @RawJobs << prometheusconfigitem_tmp end end end end # CreatePrometheusConfig返回参数结构体 class CreatePrometheusConfigResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # CreatePrometheusGlobalNotification请求参数结构体 class CreatePrometheusGlobalNotificationRequest < TencentCloud::Common::AbstractModel # @param InstanceId: 实例ID(可通过 DescribePrometheusInstances 接口获取) # @type InstanceId: String # @param Notification: 告警通知渠道 # @type Notification: :class:`Tencentcloud::Monitor.v20180724.models.PrometheusNotificationItem` attr_accessor :InstanceId, :Notification def initialize(instanceid=nil, notification=nil) @InstanceId = instanceid @Notification = notification end def deserialize(params) @InstanceId = params['InstanceId'] unless params['Notification'].nil? @Notification = PrometheusNotificationItem.new @Notification.deserialize(params['Notification']) end end end # CreatePrometheusGlobalNotification返回参数结构体 class CreatePrometheusGlobalNotificationResponse < TencentCloud::Common::AbstractModel # @param Id: 全局告警通知渠道ID # 注意:此字段可能返回 null,表示取不到有效值。 # @type Id: String # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Id, :RequestId def initialize(id=nil, requestid=nil) @Id = id @RequestId = requestid end def deserialize(params) @Id = params['Id'] @RequestId = params['RequestId'] end end # CreatePrometheusMultiTenantInstancePostPayMode请求参数结构体 class CreatePrometheusMultiTenantInstancePostPayModeRequest < TencentCloud::Common::AbstractModel # @param InstanceName: 实例名 # @type InstanceName: String # @param VpcId: VPC ID(可通过 vpc:DescribeVpcs 接口获取,与实例同地域) # @type VpcId: String # @param SubnetId: 子网 ID(可通过 vpc:DescribeSubnets 接口获取) # @type SubnetId: String # @param DataRetentionTime: 数据存储时间(单位天),限制值为15, 30, 45, 90, 180, 365, 730之一 # @type DataRetentionTime: Integer # @param Zone: 可用区(与子网同可用区) # @type Zone: String # @param TagSpecification: 实例的标签 # @type TagSpecification: Array # @param GrafanaInstanceId: 需要关联的 Grafana 实例 # @type GrafanaInstanceId: String attr_accessor :InstanceName, :VpcId, :SubnetId, :DataRetentionTime, :Zone, :TagSpecification, :GrafanaInstanceId def initialize(instancename=nil, vpcid=nil, subnetid=nil, dataretentiontime=nil, zone=nil, tagspecification=nil, grafanainstanceid=nil) @InstanceName = instancename @VpcId = vpcid @SubnetId = subnetid @DataRetentionTime = dataretentiontime @Zone = zone @TagSpecification = tagspecification @GrafanaInstanceId = grafanainstanceid end def deserialize(params) @InstanceName = params['InstanceName'] @VpcId = params['VpcId'] @SubnetId = params['SubnetId'] @DataRetentionTime = params['DataRetentionTime'] @Zone = params['Zone'] unless params['TagSpecification'].nil? @TagSpecification = [] params['TagSpecification'].each do |i| prometheustag_tmp = PrometheusTag.new prometheustag_tmp.deserialize(i) @TagSpecification << prometheustag_tmp end end @GrafanaInstanceId = params['GrafanaInstanceId'] end end # CreatePrometheusMultiTenantInstancePostPayMode返回参数结构体 class CreatePrometheusMultiTenantInstancePostPayModeResponse < TencentCloud::Common::AbstractModel # @param InstanceId: 实例 ID # @type InstanceId: String # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :InstanceId, :RequestId def initialize(instanceid=nil, requestid=nil) @InstanceId = instanceid @RequestId = requestid end def deserialize(params) @InstanceId = params['InstanceId'] @RequestId = params['RequestId'] end end # CreatePrometheusRecordRuleYaml请求参数结构体 class CreatePrometheusRecordRuleYamlRequest < TencentCloud::Common::AbstractModel # @param InstanceId: 实例id # @type InstanceId: String # @param Content: yaml的内容 # @type Content: String # @param Name: 规则名称 # @type Name: String attr_accessor :InstanceId, :Content, :Name def initialize(instanceid=nil, content=nil, name=nil) @InstanceId = instanceid @Content = content @Name = name end def deserialize(params) @InstanceId = params['InstanceId'] @Content = params['Content'] @Name = params['Name'] end end # CreatePrometheusRecordRuleYaml返回参数结构体 class CreatePrometheusRecordRuleYamlResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # CreatePrometheusScrapeJob请求参数结构体 class CreatePrometheusScrapeJobRequest < TencentCloud::Common::AbstractModel # @param InstanceId: Prometheus 实例 ID # @type InstanceId: String # @param AgentId: Agent ID(可通过DescribePrometheusAgents 接口获取) # @type AgentId: String # @param Config: 抓取任务配置 # @type Config: String attr_accessor :InstanceId, :AgentId, :Config def initialize(instanceid=nil, agentid=nil, config=nil) @InstanceId = instanceid @AgentId = agentid @Config = config end def deserialize(params) @InstanceId = params['InstanceId'] @AgentId = params['AgentId'] @Config = params['Config'] end end # CreatePrometheusScrapeJob返回参数结构体 class CreatePrometheusScrapeJobResponse < TencentCloud::Common::AbstractModel # @param JobId: 成功创建抓取任务 Id # @type JobId: String # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :JobId, :RequestId def initialize(jobid=nil, requestid=nil) @JobId = jobid @RequestId = requestid end def deserialize(params) @JobId = params['JobId'] @RequestId = params['RequestId'] end end # CreatePrometheusTemp请求参数结构体 class CreatePrometheusTempRequest < TencentCloud::Common::AbstractModel # @param Template: 模板设置 # @type Template: :class:`Tencentcloud::Monitor.v20180724.models.PrometheusTemp` attr_accessor :Template def initialize(template=nil) @Template = template end def deserialize(params) unless params['Template'].nil? @Template = PrometheusTemp.new @Template.deserialize(params['Template']) end end end # CreatePrometheusTemp返回参数结构体 class CreatePrometheusTempResponse < TencentCloud::Common::AbstractModel # @param TemplateId: 模板Id # @type TemplateId: String # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :TemplateId, :RequestId def initialize(templateid=nil, requestid=nil) @TemplateId = templateid @RequestId = requestid end def deserialize(params) @TemplateId = params['TemplateId'] @RequestId = params['RequestId'] end end # CreateRecordingRule请求参数结构体 class CreateRecordingRuleRequest < TencentCloud::Common::AbstractModel # @param Name: 聚合规则名称 # @type Name: String # @param Group: 聚合规则组内容,格式为 yaml,通过 base64 进行编码。 # @type Group: String # @param InstanceId: Prometheus 实例 ID # @type InstanceId: String # @param RuleState: 规则状态码,取值如下: #
  • 1=RuleDeleted
  • #
  • 2=RuleEnabled
  • #
  • 3=RuleDisabled
  • # 默认状态码为 2 启用。 # @type RuleState: Integer attr_accessor :Name, :Group, :InstanceId, :RuleState def initialize(name=nil, group=nil, instanceid=nil, rulestate=nil) @Name = name @Group = group @InstanceId = instanceid @RuleState = rulestate end def deserialize(params) @Name = params['Name'] @Group = params['Group'] @InstanceId = params['InstanceId'] @RuleState = params['RuleState'] end end # CreateRecordingRule返回参数结构体 class CreateRecordingRuleResponse < TencentCloud::Common::AbstractModel # @param RuleId: 规则 ID # 注意:此字段可能返回 null,表示取不到有效值。 # @type RuleId: String # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RuleId, :RequestId def initialize(ruleid=nil, requestid=nil) @RuleId = ruleid @RequestId = requestid end def deserialize(params) @RuleId = params['RuleId'] @RequestId = params['RequestId'] end end # CreateSSOAccount请求参数结构体 class CreateSSOAccountRequest < TencentCloud::Common::AbstractModel # @param InstanceId: Grafana 实例 ID,例如:grafana-abcdefgh # @type InstanceId: String # @param UserId: 用户账号 ID ,例如:10000000 # @type UserId: String # @param Role: 权限(只取数组中的第一个,其中 Organization 暂未使用,可不填) # @type Role: Array # @param Notes: 备注 # @type Notes: String attr_accessor :InstanceId, :UserId, :Role, :Notes def initialize(instanceid=nil, userid=nil, role=nil, notes=nil) @InstanceId = instanceid @UserId = userid @Role = role @Notes = notes end def deserialize(params) @InstanceId = params['InstanceId'] @UserId = params['UserId'] unless params['Role'].nil? @Role = [] params['Role'].each do |i| grafanaaccountrole_tmp = GrafanaAccountRole.new grafanaaccountrole_tmp.deserialize(i) @Role << grafanaaccountrole_tmp end end @Notes = params['Notes'] end end # CreateSSOAccount返回参数结构体 class CreateSSOAccountResponse < TencentCloud::Common::AbstractModel # @param UserId: 已添加的用户 UIN # @type UserId: String # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :UserId, :RequestId def initialize(userid=nil, requestid=nil) @UserId = userid @RequestId = requestid end def deserialize(params) @UserId = params['UserId'] @RequestId = params['RequestId'] end end # CreateServiceDiscovery请求参数结构体 class CreateServiceDiscoveryRequest < TencentCloud::Common::AbstractModel # @param InstanceId: Prometheus 实例 ID # @type InstanceId: String # @param KubeClusterId:
  • 类型为TKE:对应集成的腾讯云容器服务集群 ID
  • # @type KubeClusterId: String # @param KubeType: 用户 Kubernetes 集群类型: #
  • 1 = 容器服务集群(TKE)
  • # @type KubeType: Integer # @param Type: 服务发现类型,取值如下: #
  • 1 = ServiceMonitor
  • #
  • 2 = PodMonitor
  • #
  • 3 = JobMonitor
  • # @type Type: Integer # @param Yaml: 服务发现配置信息,YAML 格式,[具体YAML参数内容请参考](https://cloud.tencent.com/document/product/1416/55995#service-monitor) # @type Yaml: String attr_accessor :InstanceId, :KubeClusterId, :KubeType, :Type, :Yaml def initialize(instanceid=nil, kubeclusterid=nil, kubetype=nil, type=nil, yaml=nil) @InstanceId = instanceid @KubeClusterId = kubeclusterid @KubeType = kubetype @Type = type @Yaml = yaml end def deserialize(params) @InstanceId = params['InstanceId'] @KubeClusterId = params['KubeClusterId'] @KubeType = params['KubeType'] @Type = params['Type'] @Yaml = params['Yaml'] end end # CreateServiceDiscovery返回参数结构体 class CreateServiceDiscoveryResponse < TencentCloud::Common::AbstractModel # @param ServiceDiscovery: 创建成功之后,返回对应服务发现信息 # @type ServiceDiscovery: :class:`Tencentcloud::Monitor.v20180724.models.ServiceDiscoveryItem` # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :ServiceDiscovery, :RequestId def initialize(servicediscovery=nil, requestid=nil) @ServiceDiscovery = servicediscovery @RequestId = requestid end def deserialize(params) unless params['ServiceDiscovery'].nil? @ServiceDiscovery = ServiceDiscoveryItem.new @ServiceDiscovery.deserialize(params['ServiceDiscovery']) end @RequestId = params['RequestId'] end end # 监控数据点 class DataPoint < TencentCloud::Common::AbstractModel # @param Dimensions: 实例对象维度组合 # @type Dimensions: Array # @param Timestamps: 时间戳数组,表示那些时间点有数据,缺失的时间戳,没有数据点,可以理解为掉点了 # @type Timestamps: Array # @param Values: 监控值数组,该数组和Timestamps一一对应 # @type Values: Array # @param MaxValues: 监控值数组,该数组和Timestamps一一对应 # 注意:此字段可能返回 null,表示取不到有效值。 # @type MaxValues: Array # @param MinValues: 监控值数组,该数组和Timestamps一一对应 # 注意:此字段可能返回 null,表示取不到有效值。 # @type MinValues: Array # @param AvgValues: 监控值数组,该数组和Timestamps一一对应 # 注意:此字段可能返回 null,表示取不到有效值。 # @type AvgValues: Array attr_accessor :Dimensions, :Timestamps, :Values, :MaxValues, :MinValues, :AvgValues def initialize(dimensions=nil, timestamps=nil, values=nil, maxvalues=nil, minvalues=nil, avgvalues=nil) @Dimensions = dimensions @Timestamps = timestamps @Values = values @MaxValues = maxvalues @MinValues = minvalues @AvgValues = avgvalues end def deserialize(params) unless params['Dimensions'].nil? @Dimensions = [] params['Dimensions'].each do |i| dimension_tmp = Dimension.new dimension_tmp.deserialize(i) @Dimensions << dimension_tmp end end @Timestamps = params['Timestamps'] @Values = params['Values'] @MaxValues = params['MaxValues'] @MinValues = params['MinValues'] @AvgValues = params['AvgValues'] end end # DeleteAlarmNotices请求参数结构体 class DeleteAlarmNoticesRequest < TencentCloud::Common::AbstractModel # @param Module: 模块名,这里填“monitor” # @type Module: String # @param NoticeIds: 告警通知模板id列表 # @type NoticeIds: Array # @param NoticeBindPolicys: 通知模板与策略绑定关系 # @type NoticeBindPolicys: Array attr_accessor :Module, :NoticeIds, :NoticeBindPolicys def initialize(_module=nil, noticeids=nil, noticebindpolicys=nil) @Module = _module @NoticeIds = noticeids @NoticeBindPolicys = noticebindpolicys end def deserialize(params) @Module = params['Module'] @NoticeIds = params['NoticeIds'] unless params['NoticeBindPolicys'].nil? @NoticeBindPolicys = [] params['NoticeBindPolicys'].each do |i| noticebindpolicys_tmp = NoticeBindPolicys.new noticebindpolicys_tmp.deserialize(i) @NoticeBindPolicys << noticebindpolicys_tmp end end end end # DeleteAlarmNotices返回参数结构体 class DeleteAlarmNoticesResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # DeleteAlarmPolicy请求参数结构体 class DeleteAlarmPolicyRequest < TencentCloud::Common::AbstractModel # @param Module: 模块名,固定值 monitor # @type Module: String # @param PolicyIds: 告警策略 ID 列表 # @type PolicyIds: Array # @param PromInsIds: prom的实例id # @type PromInsIds: Array attr_accessor :Module, :PolicyIds, :PromInsIds def initialize(_module=nil, policyids=nil, prominsids=nil) @Module = _module @PolicyIds = policyids @PromInsIds = prominsids end def deserialize(params) @Module = params['Module'] @PolicyIds = params['PolicyIds'] @PromInsIds = params['PromInsIds'] end end # DeleteAlarmPolicy返回参数结构体 class DeleteAlarmPolicyResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # DeleteAlertRules请求参数结构体 class DeleteAlertRulesRequest < TencentCloud::Common::AbstractModel # @param RuleIds: 规则 ID 列表 # @type RuleIds: Array # @param InstanceId: Prometheus 实例 ID # @type InstanceId: String attr_accessor :RuleIds, :InstanceId def initialize(ruleids=nil, instanceid=nil) @RuleIds = ruleids @InstanceId = instanceid end def deserialize(params) @RuleIds = params['RuleIds'] @InstanceId = params['InstanceId'] end end # DeleteAlertRules返回参数结构体 class DeleteAlertRulesResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # DeleteExporterIntegration请求参数结构体 class DeleteExporterIntegrationRequest < TencentCloud::Common::AbstractModel # @param InstanceId: 实例 ID # @type InstanceId: String # @param Kind: 类型(可通过 DescribeExporterIntegrations获取) # @type Kind: String # @param Name: 名字 # @type Name: String # @param KubeType: Kubernetes 集群类型,取值如下: #
  • 1= 容器集群(TKE)
  • #
  • 2=弹性集群(EKS)
  • #
  • 3= Prometheus管理的弹性集群(MEKS)
  • # @type KubeType: Integer # @param ClusterId: 集群 ID,可不填 # @type ClusterId: String attr_accessor :InstanceId, :Kind, :Name, :KubeType, :ClusterId def initialize(instanceid=nil, kind=nil, name=nil, kubetype=nil, clusterid=nil) @InstanceId = instanceid @Kind = kind @Name = name @KubeType = kubetype @ClusterId = clusterid end def deserialize(params) @InstanceId = params['InstanceId'] @Kind = params['Kind'] @Name = params['Name'] @KubeType = params['KubeType'] @ClusterId = params['ClusterId'] end end # DeleteExporterIntegration返回参数结构体 class DeleteExporterIntegrationResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # DeleteGrafanaInstance请求参数结构体 class DeleteGrafanaInstanceRequest < TencentCloud::Common::AbstractModel # @param InstanceIDs: 实例ID数组 # @type InstanceIDs: Array attr_accessor :InstanceIDs def initialize(instanceids=nil) @InstanceIDs = instanceids end def deserialize(params) @InstanceIDs = params['InstanceIDs'] end end # DeleteGrafanaInstance返回参数结构体 class DeleteGrafanaInstanceResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # DeleteGrafanaIntegration请求参数结构体 class DeleteGrafanaIntegrationRequest < TencentCloud::Common::AbstractModel # @param InstanceId: Grafana 实例 ID,例如:grafana-12345678 # @type InstanceId: String # @param IntegrationId: 集成 ID,可在实例详情-云产品集成-集成列表查看。例如:integration-abcd1234 # @type IntegrationId: String attr_accessor :InstanceId, :IntegrationId def initialize(instanceid=nil, integrationid=nil) @InstanceId = instanceid @IntegrationId = integrationid end def deserialize(params) @InstanceId = params['InstanceId'] @IntegrationId = params['IntegrationId'] end end # DeleteGrafanaIntegration返回参数结构体 class DeleteGrafanaIntegrationResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # DeleteGrafanaNotificationChannel请求参数结构体 class DeleteGrafanaNotificationChannelRequest < TencentCloud::Common::AbstractModel # @param ChannelIDs: 通道 ID 数组。例如:nchannel-abcd1234,通过 DescribeGrafanaChannels 获取 # @type ChannelIDs: Array # @param InstanceId: Grafana 实例 ID,例如:grafana-abcdefgh # @type InstanceId: String attr_accessor :ChannelIDs, :InstanceId def initialize(channelids=nil, instanceid=nil) @ChannelIDs = channelids @InstanceId = instanceid end def deserialize(params) @ChannelIDs = params['ChannelIDs'] @InstanceId = params['InstanceId'] end end # DeleteGrafanaNotificationChannel返回参数结构体 class DeleteGrafanaNotificationChannelResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # DeletePolicyGroup请求参数结构体 class DeletePolicyGroupRequest < TencentCloud::Common::AbstractModel # @param Module: 固定值,为"monitor" # @type Module: String # @param GroupId: 策略组id,即1.0的告警策略id,可以从策略详情获取 # @type GroupId: Array attr_accessor :Module, :GroupId def initialize(_module=nil, groupid=nil) @Module = _module @GroupId = groupid end def deserialize(params) @Module = params['Module'] @GroupId = params['GroupId'] end end # DeletePolicyGroup返回参数结构体 class DeletePolicyGroupResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # DeletePrometheusAlertGroups请求参数结构体 class DeletePrometheusAlertGroupsRequest < TencentCloud::Common::AbstractModel # @param InstanceId: prometheus实例id # @type InstanceId: String # @param GroupIds: 需要删除的告警分组ID,形如alert-xxxxx # @type GroupIds: Array attr_accessor :InstanceId, :GroupIds def initialize(instanceid=nil, groupids=nil) @InstanceId = instanceid @GroupIds = groupids end def deserialize(params) @InstanceId = params['InstanceId'] @GroupIds = params['GroupIds'] end end # DeletePrometheusAlertGroups返回参数结构体 class DeletePrometheusAlertGroupsResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # DeletePrometheusAlertPolicy请求参数结构体 class DeletePrometheusAlertPolicyRequest < TencentCloud::Common::AbstractModel # @param InstanceId: 实例ID(可通过 DescribePrometheusInstances 接口获取) # @type InstanceId: String # @param AlertIds: 告警策略ID列表(可通过 DescribePrometheusAlertPolicy 接口获取) # @type AlertIds: Array # @param Names: 告警策略名称(可通过 DescribePrometheusAlertPolicy 接口获取),名称完全相同的告警策略才会删除 # @type Names: Array attr_accessor :InstanceId, :AlertIds, :Names def initialize(instanceid=nil, alertids=nil, names=nil) @InstanceId = instanceid @AlertIds = alertids @Names = names end def deserialize(params) @InstanceId = params['InstanceId'] @AlertIds = params['AlertIds'] @Names = params['Names'] end end # DeletePrometheusAlertPolicy返回参数结构体 class DeletePrometheusAlertPolicyResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # DeletePrometheusClusterAgent请求参数结构体 class DeletePrometheusClusterAgentRequest < TencentCloud::Common::AbstractModel # @param Agents: agent列表 # @type Agents: Array # @param InstanceId: 实例id # @type InstanceId: String attr_accessor :Agents, :InstanceId def initialize(agents=nil, instanceid=nil) @Agents = agents @InstanceId = instanceid end def deserialize(params) unless params['Agents'].nil? @Agents = [] params['Agents'].each do |i| prometheusagentinfo_tmp = PrometheusAgentInfo.new prometheusagentinfo_tmp.deserialize(i) @Agents << prometheusagentinfo_tmp end end @InstanceId = params['InstanceId'] end end # DeletePrometheusClusterAgent返回参数结构体 class DeletePrometheusClusterAgentResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # DeletePrometheusConfig请求参数结构体 class DeletePrometheusConfigRequest < TencentCloud::Common::AbstractModel # @param InstanceId: 实例id # @type InstanceId: String # @param ClusterType: 集群类型 # @type ClusterType: String # @param ClusterId: 集群id # @type ClusterId: String # @param ServiceMonitors: 要删除的ServiceMonitor名字列表 # @type ServiceMonitors: Array # @param PodMonitors: 要删除的PodMonitor名字列表 # @type PodMonitors: Array # @param RawJobs: 要删除的RawJobs名字列表 # @type RawJobs: Array attr_accessor :InstanceId, :ClusterType, :ClusterId, :ServiceMonitors, :PodMonitors, :RawJobs def initialize(instanceid=nil, clustertype=nil, clusterid=nil, servicemonitors=nil, podmonitors=nil, rawjobs=nil) @InstanceId = instanceid @ClusterType = clustertype @ClusterId = clusterid @ServiceMonitors = servicemonitors @PodMonitors = podmonitors @RawJobs = rawjobs end def deserialize(params) @InstanceId = params['InstanceId'] @ClusterType = params['ClusterType'] @ClusterId = params['ClusterId'] @ServiceMonitors = params['ServiceMonitors'] @PodMonitors = params['PodMonitors'] @RawJobs = params['RawJobs'] end end # DeletePrometheusConfig返回参数结构体 class DeletePrometheusConfigResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # DeletePrometheusRecordRuleYaml请求参数结构体 class DeletePrometheusRecordRuleYamlRequest < TencentCloud::Common::AbstractModel # @param InstanceId: 实例id # @type InstanceId: String # @param Names: 聚合规则列表 # @type Names: Array attr_accessor :InstanceId, :Names def initialize(instanceid=nil, names=nil) @InstanceId = instanceid @Names = names end def deserialize(params) @InstanceId = params['InstanceId'] @Names = params['Names'] end end # DeletePrometheusRecordRuleYaml返回参数结构体 class DeletePrometheusRecordRuleYamlResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # DeletePrometheusScrapeJobs请求参数结构体 class DeletePrometheusScrapeJobsRequest < TencentCloud::Common::AbstractModel # @param InstanceId: 实例 ID # @type InstanceId: String # @param AgentId: Agent ID(可通过 DescribePrometheusAgents 接口获取) # @type AgentId: String # @param JobIds: 任务 ID 列表(可通过 DescribePrometheusScrapeJobs 接口获取) # @type JobIds: Array attr_accessor :InstanceId, :AgentId, :JobIds def initialize(instanceid=nil, agentid=nil, jobids=nil) @InstanceId = instanceid @AgentId = agentid @JobIds = jobids end def deserialize(params) @InstanceId = params['InstanceId'] @AgentId = params['AgentId'] @JobIds = params['JobIds'] end end # DeletePrometheusScrapeJobs返回参数结构体 class DeletePrometheusScrapeJobsResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # DeletePrometheusTemp请求参数结构体 class DeletePrometheusTempRequest < TencentCloud::Common::AbstractModel # @param TemplateId: 模板id # @type TemplateId: String attr_accessor :TemplateId def initialize(templateid=nil) @TemplateId = templateid end def deserialize(params) @TemplateId = params['TemplateId'] end end # DeletePrometheusTemp返回参数结构体 class DeletePrometheusTempResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # DeletePrometheusTempSync请求参数结构体 class DeletePrometheusTempSyncRequest < TencentCloud::Common::AbstractModel # @param TemplateId: 模板id # @type TemplateId: String # @param Targets: 取消同步的对象列表 # @type Targets: Array attr_accessor :TemplateId, :Targets def initialize(templateid=nil, targets=nil) @TemplateId = templateid @Targets = targets end def deserialize(params) @TemplateId = params['TemplateId'] unless params['Targets'].nil? @Targets = [] params['Targets'].each do |i| prometheustemplatesynctarget_tmp = PrometheusTemplateSyncTarget.new prometheustemplatesynctarget_tmp.deserialize(i) @Targets << prometheustemplatesynctarget_tmp end end end end # DeletePrometheusTempSync返回参数结构体 class DeletePrometheusTempSyncResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # DeleteRecordingRules请求参数结构体 class DeleteRecordingRulesRequest < TencentCloud::Common::AbstractModel # @param RuleIds: 规则 ID 列表(规则 ID 可通过 DescribeRecordingRules 接口获取) # @type RuleIds: Array # @param InstanceId: Prometheus 实例 ID # @type InstanceId: String attr_accessor :RuleIds, :InstanceId def initialize(ruleids=nil, instanceid=nil) @RuleIds = ruleids @InstanceId = instanceid end def deserialize(params) @RuleIds = params['RuleIds'] @InstanceId = params['InstanceId'] end end # DeleteRecordingRules返回参数结构体 class DeleteRecordingRulesResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # DeleteSSOAccount请求参数结构体 class DeleteSSOAccountRequest < TencentCloud::Common::AbstractModel # @param InstanceId: Grafana 实例 ID,例如:grafana-abcdefgh # @type InstanceId: String # @param UserId: 用户账号 ID ,例如:10000000 # @type UserId: String attr_accessor :InstanceId, :UserId def initialize(instanceid=nil, userid=nil) @InstanceId = instanceid @UserId = userid end def deserialize(params) @InstanceId = params['InstanceId'] @UserId = params['UserId'] end end # DeleteSSOAccount返回参数结构体 class DeleteSSOAccountResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # DeleteServiceDiscovery请求参数结构体 class DeleteServiceDiscoveryRequest < TencentCloud::Common::AbstractModel # @param InstanceId: Prometheus 实例 ID,例如:prom-sdfk2342a # @type InstanceId: String # @param KubeClusterId:
  • 类型是 TKE,为对应的腾讯云容器服务集群 ID
  • # @type KubeClusterId: String # @param KubeType: 用户 Kubernetes 集群类型: #
  • 1 = 容器服务集群(TKE)
  • # @type KubeType: Integer # @param Type: 服务发现类型,取值如下: #
  • 1 = ServiceMonitor
  • #
  • 2 = PodMonitor
  • #
  • 3 = PodMonitor
  • # @type Type: Integer # @param Yaml: 服务发现配置信息,YAML 格式,[具体YAML参数内容请参考](https://cloud.tencent.com/document/product/1416/55995#service-monitor) # @type Yaml: String attr_accessor :InstanceId, :KubeClusterId, :KubeType, :Type, :Yaml def initialize(instanceid=nil, kubeclusterid=nil, kubetype=nil, type=nil, yaml=nil) @InstanceId = instanceid @KubeClusterId = kubeclusterid @KubeType = kubetype @Type = type @Yaml = yaml end def deserialize(params) @InstanceId = params['InstanceId'] @KubeClusterId = params['KubeClusterId'] @KubeType = params['KubeType'] @Type = params['Type'] @Yaml = params['Yaml'] end end # DeleteServiceDiscovery返回参数结构体 class DeleteServiceDiscoveryResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # DescribeAccidentEventList接口的出参类型 class DescribeAccidentEventListAlarms < TencentCloud::Common::AbstractModel # @param BusinessTypeDesc: 事件分类 # 注意:此字段可能返回 null,表示取不到有效值。 # @type BusinessTypeDesc: String # @param AccidentTypeDesc: 事件类型 # 注意:此字段可能返回 null,表示取不到有效值。 # @type AccidentTypeDesc: String # @param BusinessID: 事件分类的ID,1表示服务问题,2表示其他订阅 # 注意:此字段可能返回 null,表示取不到有效值。 # @type BusinessID: Integer # @param EventStatus: 事件状态的ID,0表示已恢复,1表示未恢复 # 注意:此字段可能返回 null,表示取不到有效值。 # @type EventStatus: Integer # @param AffectResource: 影响的对象 # 注意:此字段可能返回 null,表示取不到有效值。 # @type AffectResource: String # @param Region: 事件的地域 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Region: String # @param OccurTime: 事件发生的时间 # 注意:此字段可能返回 null,表示取不到有效值。 # @type OccurTime: String # @param UpdateTime: 更新时间 # 注意:此字段可能返回 null,表示取不到有效值。 # @type UpdateTime: String attr_accessor :BusinessTypeDesc, :AccidentTypeDesc, :BusinessID, :EventStatus, :AffectResource, :Region, :OccurTime, :UpdateTime def initialize(businesstypedesc=nil, accidenttypedesc=nil, businessid=nil, eventstatus=nil, affectresource=nil, region=nil, occurtime=nil, updatetime=nil) @BusinessTypeDesc = businesstypedesc @AccidentTypeDesc = accidenttypedesc @BusinessID = businessid @EventStatus = eventstatus @AffectResource = affectresource @Region = region @OccurTime = occurtime @UpdateTime = updatetime end def deserialize(params) @BusinessTypeDesc = params['BusinessTypeDesc'] @AccidentTypeDesc = params['AccidentTypeDesc'] @BusinessID = params['BusinessID'] @EventStatus = params['EventStatus'] @AffectResource = params['AffectResource'] @Region = params['Region'] @OccurTime = params['OccurTime'] @UpdateTime = params['UpdateTime'] end end # DescribeAccidentEventList请求参数结构体 class DescribeAccidentEventListRequest < TencentCloud::Common::AbstractModel # @param Module: 接口模块名,当前接口取值monitor # @type Module: String # @param StartTime: 起始时间,默认一天前的时间戳 # @type StartTime: Integer # @param EndTime: 结束时间,默认当前时间戳 # @type EndTime: Integer # @param Limit: 分页参数,每页返回的数量,取值1~100,默认20 # @type Limit: Integer # @param Offset: 分页参数,页偏移量,从0开始计数,默认0 # @type Offset: Integer # @param UpdateTimeOrder: 根据UpdateTime排序的规则,取值asc或desc # @type UpdateTimeOrder: String # @param OccurTimeOrder: 根据OccurTime排序的规则,取值asc或desc(优先根据UpdateTimeOrder排序) # @type OccurTimeOrder: String # @param AccidentType: 根据事件类型过滤,1表示服务问题,2表示其他订阅 # @type AccidentType: Array # @param AccidentEvent: 根据事件过滤,1表示云服务器存储问题,2表示云服务器网络连接问题,3表示云服务器运行异常,202表示运营商网络抖动 # @type AccidentEvent: Array # @param AccidentStatus: 根据事件状态过滤,0表示已恢复,1表示未恢复 # @type AccidentStatus: Array # @param AccidentRegion: 根据事件地域过滤,gz表示广州,sh表示上海等 # @type AccidentRegion: Array # @param AffectResource: 根据影响资源过滤,比如ins-19a06bka # @type AffectResource: String attr_accessor :Module, :StartTime, :EndTime, :Limit, :Offset, :UpdateTimeOrder, :OccurTimeOrder, :AccidentType, :AccidentEvent, :AccidentStatus, :AccidentRegion, :AffectResource def initialize(_module=nil, starttime=nil, endtime=nil, limit=nil, offset=nil, updatetimeorder=nil, occurtimeorder=nil, accidenttype=nil, accidentevent=nil, accidentstatus=nil, accidentregion=nil, affectresource=nil) @Module = _module @StartTime = starttime @EndTime = endtime @Limit = limit @Offset = offset @UpdateTimeOrder = updatetimeorder @OccurTimeOrder = occurtimeorder @AccidentType = accidenttype @AccidentEvent = accidentevent @AccidentStatus = accidentstatus @AccidentRegion = accidentregion @AffectResource = affectresource end def deserialize(params) @Module = params['Module'] @StartTime = params['StartTime'] @EndTime = params['EndTime'] @Limit = params['Limit'] @Offset = params['Offset'] @UpdateTimeOrder = params['UpdateTimeOrder'] @OccurTimeOrder = params['OccurTimeOrder'] @AccidentType = params['AccidentType'] @AccidentEvent = params['AccidentEvent'] @AccidentStatus = params['AccidentStatus'] @AccidentRegion = params['AccidentRegion'] @AffectResource = params['AffectResource'] end end # DescribeAccidentEventList返回参数结构体 class DescribeAccidentEventListResponse < TencentCloud::Common::AbstractModel # @param Alarms: 平台事件列表 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Alarms: Array # @param Total: 平台事件的总数 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Total: Integer # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Alarms, :Total, :RequestId def initialize(alarms=nil, total=nil, requestid=nil) @Alarms = alarms @Total = total @RequestId = requestid end def deserialize(params) unless params['Alarms'].nil? @Alarms = [] params['Alarms'].each do |i| describeaccidenteventlistalarms_tmp = DescribeAccidentEventListAlarms.new describeaccidenteventlistalarms_tmp.deserialize(i) @Alarms << describeaccidenteventlistalarms_tmp end end @Total = params['Total'] @RequestId = params['RequestId'] end end # DescribeAlarmEvents请求参数结构体 class DescribeAlarmEventsRequest < TencentCloud::Common::AbstractModel # @param Module: 模块名,固定值 monitor # @type Module: String # @param Namespace: 告警策略类型,由 DescribeAllNamespaces 获得,例如 cvm_device # @type Namespace: String # @param MonitorType: 监控类型,如 MT_QCE。如果不填默认为 MT_QCE。 # @type MonitorType: String attr_accessor :Module, :Namespace, :MonitorType def initialize(_module=nil, namespace=nil, monitortype=nil) @Module = _module @Namespace = namespace @MonitorType = monitortype end def deserialize(params) @Module = params['Module'] @Namespace = params['Namespace'] @MonitorType = params['MonitorType'] end end # DescribeAlarmEvents返回参数结构体 class DescribeAlarmEventsResponse < TencentCloud::Common::AbstractModel # @param Events: 告警事件列表 # @type Events: Array # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Events, :RequestId def initialize(events=nil, requestid=nil) @Events = events @RequestId = requestid end def deserialize(params) unless params['Events'].nil? @Events = [] params['Events'].each do |i| alarmevent_tmp = AlarmEvent.new alarmevent_tmp.deserialize(i) @Events << alarmevent_tmp end end @RequestId = params['RequestId'] end end # DescribeAlarmHistories请求参数结构体 class DescribeAlarmHistoriesRequest < TencentCloud::Common::AbstractModel # @param Module: 固定值,为"monitor" # @type Module: String # @param PageNumber: 页数,从 1 开始计数,默认 1 # @type PageNumber: Integer # @param PageSize: 每页的数量,取值1~100,默认20 # @type PageSize: Integer # @param Order: 默认按首次出现时间倒序排列 "ASC"=正序 "DESC"=逆序 # @type Order: String # @param StartTime: 起始时间,默认一天前的时间戳。对应 `FirstOccurTime` 告警首次出现时间,告警历史的 `FirstOccurTime` 晚于 `StartTime` 才可能被搜索到。 # @type StartTime: Integer # @param EndTime: 结束时间,默认当前时间戳。对应 `FirstOccurTime` 告警首次出现时间,告警历史的 `FirstOccurTime` 早于 `EndTime` 才可能被搜索到。 # @type EndTime: Integer # @param MonitorTypes: 根据监控类型过滤,不选默认查所有类型。"MT_QCE"=云产品监控,支持的枚举值有:"MT_QCE"=云产品监控;"MT_TAW"=应用性能监控;"MT_RUM"=前端性能监控;"MT_PROBE"=云拨测,"MT_TRTC"=实时音视频, # "MT_RUMAPP"=终端性能监控 # @type MonitorTypes: Array # @param AlarmObject: 根据告警对象过滤 字符串模糊搜索 # @type AlarmObject: String # @param AlarmStatus: 根据告警状态过滤 ALARM=未恢复 OK=已恢复 NO_CONF=已失效 NO_DATA=数据不足,不选默认查所有 # @type AlarmStatus: Array # @param ProjectIds: 根据项目ID过滤,-1=无项目 0=默认项目 # 可在此页面查询 [项目管理](https://console.cloud.tencent.com/project) # @type ProjectIds: Array # @param InstanceGroupIds: 根据实例组ID过滤 # @type InstanceGroupIds: Array # @param Namespaces: 根据策略类型过滤,策略类型是监控类型之下的概念,在这里两者都需要传入,例如 `[{"MonitorType": "MT_QCE", "Namespace": "cvm_device"}]` # 可使用 [查询所有名字空间 DescribeAllNamespaces](https://cloud.tencent.com/document/product/248/48683) 接口查询 # @type Namespaces: Array # @param MetricNames: 根据指标名过滤 # @type MetricNames: Array # @param PolicyName: 根据策略名称模糊搜索,不支持大小写区分 # @type PolicyName: String # @param Content: 根据告警内容模糊搜索 # @type Content: String # @param ReceiverUids: 根据接收人搜索,可以使用“访问管理”的 [拉取子用户 ListUsers](https://cloud.tencent.com/document/product/598/34587) 接口获取用户列表 或 [查询子用户 GetUser](https://cloud.tencent.com/document/product/598/34590) 接口查询子用户详情,此处填入返回结果中的 `Uid` 字段 # @type ReceiverUids: Array # @param ReceiverGroups: 根据接收组搜索,可以使用“访问管理”的 [查询用户组列表 ListGroups](https://cloud.tencent.com/document/product/598/34589) 接口获取用户组列表 或 [列出用户关联的用户组 ListGroupsForUser](https://cloud.tencent.com/document/product/598/34588) 查询某个子用户所在的用户组列表 ,此处填入返回结果中的 `GroupId ` 字段 # @type ReceiverGroups: Array # @param PolicyIds: 根据告警策略 Id 列表搜索 # @type PolicyIds: Array # @param AlarmLevels: 告警等级,取值范围:Remind、Serious、Warn # @type AlarmLevels: Array # @param ConvergenceHistoryIDs: 收敛历史的唯一id # @type ConvergenceHistoryIDs: Array # @param AlarmTypes: 告警类型 # @type AlarmTypes: Array attr_accessor :Module, :PageNumber, :PageSize, :Order, :StartTime, :EndTime, :MonitorTypes, :AlarmObject, :AlarmStatus, :ProjectIds, :InstanceGroupIds, :Namespaces, :MetricNames, :PolicyName, :Content, :ReceiverUids, :ReceiverGroups, :PolicyIds, :AlarmLevels, :ConvergenceHistoryIDs, :AlarmTypes def initialize(_module=nil, pagenumber=nil, pagesize=nil, order=nil, starttime=nil, endtime=nil, monitortypes=nil, alarmobject=nil, alarmstatus=nil, projectids=nil, instancegroupids=nil, namespaces=nil, metricnames=nil, policyname=nil, content=nil, receiveruids=nil, receivergroups=nil, policyids=nil, alarmlevels=nil, convergencehistoryids=nil, alarmtypes=nil) @Module = _module @PageNumber = pagenumber @PageSize = pagesize @Order = order @StartTime = starttime @EndTime = endtime @MonitorTypes = monitortypes @AlarmObject = alarmobject @AlarmStatus = alarmstatus @ProjectIds = projectids @InstanceGroupIds = instancegroupids @Namespaces = namespaces @MetricNames = metricnames @PolicyName = policyname @Content = content @ReceiverUids = receiveruids @ReceiverGroups = receivergroups @PolicyIds = policyids @AlarmLevels = alarmlevels @ConvergenceHistoryIDs = convergencehistoryids @AlarmTypes = alarmtypes end def deserialize(params) @Module = params['Module'] @PageNumber = params['PageNumber'] @PageSize = params['PageSize'] @Order = params['Order'] @StartTime = params['StartTime'] @EndTime = params['EndTime'] @MonitorTypes = params['MonitorTypes'] @AlarmObject = params['AlarmObject'] @AlarmStatus = params['AlarmStatus'] @ProjectIds = params['ProjectIds'] @InstanceGroupIds = params['InstanceGroupIds'] unless params['Namespaces'].nil? @Namespaces = [] params['Namespaces'].each do |i| monitortypenamespace_tmp = MonitorTypeNamespace.new monitortypenamespace_tmp.deserialize(i) @Namespaces << monitortypenamespace_tmp end end @MetricNames = params['MetricNames'] @PolicyName = params['PolicyName'] @Content = params['Content'] @ReceiverUids = params['ReceiverUids'] @ReceiverGroups = params['ReceiverGroups'] @PolicyIds = params['PolicyIds'] @AlarmLevels = params['AlarmLevels'] @ConvergenceHistoryIDs = params['ConvergenceHistoryIDs'] @AlarmTypes = params['AlarmTypes'] end end # DescribeAlarmHistories返回参数结构体 class DescribeAlarmHistoriesResponse < TencentCloud::Common::AbstractModel # @param TotalCount: 总数 # @type TotalCount: Integer # @param Histories: 告警历史列表 # @type Histories: Array # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :TotalCount, :Histories, :RequestId def initialize(totalcount=nil, histories=nil, requestid=nil) @TotalCount = totalcount @Histories = histories @RequestId = requestid end def deserialize(params) @TotalCount = params['TotalCount'] unless params['Histories'].nil? @Histories = [] params['Histories'].each do |i| alarmhistory_tmp = AlarmHistory.new alarmhistory_tmp.deserialize(i) @Histories << alarmhistory_tmp end end @RequestId = params['RequestId'] end end # DescribeAlarmMetrics请求参数结构体 class DescribeAlarmMetricsRequest < TencentCloud::Common::AbstractModel # @param Module: 固定值,为"monitor" # @type Module: String # @param MonitorType: 监控类型过滤 "MT_QCE"=云产品监控 # @type MonitorType: String # @param Namespace: 告警策略类型,由 DescribeAllNamespaces 获得,例如 cvm_device # @type Namespace: String attr_accessor :Module, :MonitorType, :Namespace def initialize(_module=nil, monitortype=nil, namespace=nil) @Module = _module @MonitorType = monitortype @Namespace = namespace end def deserialize(params) @Module = params['Module'] @MonitorType = params['MonitorType'] @Namespace = params['Namespace'] end end # DescribeAlarmMetrics返回参数结构体 class DescribeAlarmMetricsResponse < TencentCloud::Common::AbstractModel # @param Metrics: 告警指标列表 # @type Metrics: Array # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Metrics, :RequestId def initialize(metrics=nil, requestid=nil) @Metrics = metrics @RequestId = requestid end def deserialize(params) unless params['Metrics'].nil? @Metrics = [] params['Metrics'].each do |i| metric_tmp = Metric.new metric_tmp.deserialize(i) @Metrics << metric_tmp end end @RequestId = params['RequestId'] end end # DescribeAlarmNoticeCallbacks请求参数结构体 class DescribeAlarmNoticeCallbacksRequest < TencentCloud::Common::AbstractModel # @param Module: 模块名,这里填“monitor” # @type Module: String attr_accessor :Module def initialize(_module=nil) @Module = _module end def deserialize(params) @Module = params['Module'] end end # DescribeAlarmNoticeCallbacks返回参数结构体 class DescribeAlarmNoticeCallbacksResponse < TencentCloud::Common::AbstractModel # @param URLNotices: 告警回调通知 # 注意:此字段可能返回 null,表示取不到有效值。 # @type URLNotices: Array # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :URLNotices, :RequestId def initialize(urlnotices=nil, requestid=nil) @URLNotices = urlnotices @RequestId = requestid end def deserialize(params) unless params['URLNotices'].nil? @URLNotices = [] params['URLNotices'].each do |i| urlnotice_tmp = URLNotice.new urlnotice_tmp.deserialize(i) @URLNotices << urlnotice_tmp end end @RequestId = params['RequestId'] end end # DescribeAlarmNotice请求参数结构体 class DescribeAlarmNoticeRequest < TencentCloud::Common::AbstractModel # @param Module: 模块名,这里填“monitor” # @type Module: String # @param NoticeId: 告警通知模板 id # @type NoticeId: String attr_accessor :Module, :NoticeId def initialize(_module=nil, noticeid=nil) @Module = _module @NoticeId = noticeid end def deserialize(params) @Module = params['Module'] @NoticeId = params['NoticeId'] end end # DescribeAlarmNotice返回参数结构体 class DescribeAlarmNoticeResponse < TencentCloud::Common::AbstractModel # @param Notice: 告警通知模板详细信息 # @type Notice: :class:`Tencentcloud::Monitor.v20180724.models.AlarmNotice` # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Notice, :RequestId def initialize(notice=nil, requestid=nil) @Notice = notice @RequestId = requestid end def deserialize(params) unless params['Notice'].nil? @Notice = AlarmNotice.new @Notice.deserialize(params['Notice']) end @RequestId = params['RequestId'] end end # DescribeAlarmNotices请求参数结构体 class DescribeAlarmNoticesRequest < TencentCloud::Common::AbstractModel # @param Module: 模块名,这里填“monitor” # @type Module: String # @param PageNumber: 页码 最小为1 # @type PageNumber: Integer # @param PageSize: 分页大小 1~200 # @type PageSize: Integer # @param Order: 按更新时间排序方式 ASC=正序 DESC=倒序 # @type Order: String # @param OwnerUid: 主账号 uid 用于创建预设通知 # @type OwnerUid: Integer # @param Name: 告警通知模板名称 用来模糊搜索 # @type Name: String # @param ReceiverType: 根据接收人过滤告警通知模板需要选定通知用户类型 USER=用户 GROUP=用户组 传空=不按接收人过滤 # @type ReceiverType: String # @param UserIds: 接收对象列表 # @type UserIds: Array # @param GroupIds: 接收组列表 # @type GroupIds: Array # @param NoticeIds: 根据通知模板 id 过滤,空数组/不传则不过滤 # @type NoticeIds: Array # @param Tags: 模板根据标签过滤 # @type Tags: Array # @param OnCallFormIDs: 值班列表 # @type OnCallFormIDs: Array attr_accessor :Module, :PageNumber, :PageSize, :Order, :OwnerUid, :Name, :ReceiverType, :UserIds, :GroupIds, :NoticeIds, :Tags, :OnCallFormIDs def initialize(_module=nil, pagenumber=nil, pagesize=nil, order=nil, owneruid=nil, name=nil, receivertype=nil, userids=nil, groupids=nil, noticeids=nil, tags=nil, oncallformids=nil) @Module = _module @PageNumber = pagenumber @PageSize = pagesize @Order = order @OwnerUid = owneruid @Name = name @ReceiverType = receivertype @UserIds = userids @GroupIds = groupids @NoticeIds = noticeids @Tags = tags @OnCallFormIDs = oncallformids end def deserialize(params) @Module = params['Module'] @PageNumber = params['PageNumber'] @PageSize = params['PageSize'] @Order = params['Order'] @OwnerUid = params['OwnerUid'] @Name = params['Name'] @ReceiverType = params['ReceiverType'] @UserIds = params['UserIds'] @GroupIds = params['GroupIds'] @NoticeIds = params['NoticeIds'] unless params['Tags'].nil? @Tags = [] params['Tags'].each do |i| tag_tmp = Tag.new tag_tmp.deserialize(i) @Tags << tag_tmp end end @OnCallFormIDs = params['OnCallFormIDs'] end end # DescribeAlarmNotices返回参数结构体 class DescribeAlarmNoticesResponse < TencentCloud::Common::AbstractModel # @param TotalCount: 告警通知模板总数 # @type TotalCount: Integer # @param Notices: 告警通知模板列表 # @type Notices: Array # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :TotalCount, :Notices, :RequestId def initialize(totalcount=nil, notices=nil, requestid=nil) @TotalCount = totalcount @Notices = notices @RequestId = requestid end def deserialize(params) @TotalCount = params['TotalCount'] unless params['Notices'].nil? @Notices = [] params['Notices'].each do |i| alarmnotice_tmp = AlarmNotice.new alarmnotice_tmp.deserialize(i) @Notices << alarmnotice_tmp end end @RequestId = params['RequestId'] end end # DescribeAlarmPolicies请求参数结构体 class DescribeAlarmPoliciesRequest < TencentCloud::Common::AbstractModel # @param Module: 固定值,为"monitor" # @type Module: String # @param PageNumber: 页数,从 1 开始计数,默认 1 # @type PageNumber: Integer # @param PageSize: 每页的数量,取值1~100,默认20 # @type PageSize: Integer # @param PolicyName: 按策略名称模糊搜索 # @type PolicyName: String # @param MonitorTypes: 根据监控类型过滤 不选默认查所有类型 "MT_QCE"=云产品监控,当Dimension不为空时,该项为必填项 # @type MonitorTypes: Array # @param Namespaces: 根据命名空间过滤,不同策略类型的值详见 # [策略类型列表](https://cloud.tencent.com/document/product/248/50397)当Dimension不为空时,该项为必填项 # @type Namespaces: Array # @param Dimensions: 告警对象列表,JSON 字符串。外层数组,对应多个实例,内层为对象的维度。例如“云服务器-基础监控”可写为: # `[ {"Dimensions": {"unInstanceId": "ins-qr8d555g"}}, {"Dimensions": {"unInstanceId": "ins-qr8d555h"}} ]` # 具体也可以参考下方的示例 2。 # 不同云产品参数示例详见 [维度信息Dimensions列表](https://cloud.tencent.com/document/product/248/50397) # 注意:如果NeedCorrespondence传入1,即需要返回策略与实例对应关系,请传入不多于20个告警对象维度,否则容易请求超时 # @type Dimensions: String # @param ReceiverUids: 根据接收人搜索,可以使用“访问管理”的 [拉取子用户 ListUsers](https://cloud.tencent.com/document/product/598/34587) 接口获取用户列表 或 [查询子用户 GetUser](https://cloud.tencent.com/document/product/598/34590) 接口查询子用户详情,此处填入返回结果中的 `Uid` 字段 # @type ReceiverUids: Array # @param ReceiverGroups: 根据接收组搜索,可以使用“访问管理”的 [查询用户组列表 ListGroups](https://cloud.tencent.com/document/product/598/34589) 接口获取用户组列表 或 [列出用户关联的用户组 ListGroupsForUser](https://cloud.tencent.com/document/product/598/34588) 查询某个子用户所在的用户组列表 ,此处填入返回结果中的 `GroupId ` 字段 # @type ReceiverGroups: Array # @param PolicyType: 根据默认策略筛选 不传展示全部策略 DEFAULT=展示默认策略 NOT_DEFAULT=展示非默认策略 # @type PolicyType: Array # @param Field: 排序字段,例如按照最后修改时间排序,Field: "UpdateTime" # @type Field: String # @param Order: 排序顺序:升序:ASC 降序:DESC # @type Order: String # @param ProjectIds: 策略所属项目的id数组,可在此页面查看 # [项目管理](https://console.cloud.tencent.com/project) # @type ProjectIds: Array # @param NoticeIds: 通知模板的id列表,可查询通知模板列表获取。 # 可使用 [查询通知模板列表](https://cloud.tencent.com/document/product/248/51280) 接口查询。 # @type NoticeIds: Array # @param RuleTypes: 根据触发条件筛选 不传展示全部策略 STATIC=展示静态阈值策略 DYNAMIC=展示动态阈值策略 # @type RuleTypes: Array # @param Enable: 告警启停筛选,[1]:启用 [0]:停止,全部[0, 1] # @type Enable: Array # @param NotBindingNoticeRule: 传 1 查询未配置通知规则的告警策略;不传或传其他数值,查询所有策略。 # @type NotBindingNoticeRule: Integer # @param InstanceGroupId: 实例分组id # @type InstanceGroupId: Integer # @param NeedCorrespondence: 是否需要策略与入参过滤维度参数的对应关系,1:是 0:否,默认为0 # @type NeedCorrespondence: Integer # @param TriggerTasks: 按照触发任务(例如弹性伸缩)过滤策略。最多10个 # @type TriggerTasks: Array # @param OneClickPolicyType: 根据一键告警策略筛选 不传展示全部策略 ONECLICK=展示一键告警策略 NOT_ONECLICK=展示非一键告警策略 # @type OneClickPolicyType: Array # @param NotBindAll: 返回结果过滤掉绑定全部对象的策略,1代表需要过滤,0则无需过滤 # @type NotBindAll: Integer # @param NotInstanceGroup: 返回结果过滤掉关联实例为实例分组的策略,1代表需要过滤,0则无需过滤 # @type NotInstanceGroup: Integer # @param Tags: 策略根据标签过滤 # @type Tags: Array # @param PromInsId: prom实例id,自定义指标策略时会用到 # @type PromInsId: String # @param ReceiverOnCallFormIDs: 根据排班表搜索 # @type ReceiverOnCallFormIDs: Array attr_accessor :Module, :PageNumber, :PageSize, :PolicyName, :MonitorTypes, :Namespaces, :Dimensions, :ReceiverUids, :ReceiverGroups, :PolicyType, :Field, :Order, :ProjectIds, :NoticeIds, :RuleTypes, :Enable, :NotBindingNoticeRule, :InstanceGroupId, :NeedCorrespondence, :TriggerTasks, :OneClickPolicyType, :NotBindAll, :NotInstanceGroup, :Tags, :PromInsId, :ReceiverOnCallFormIDs def initialize(_module=nil, pagenumber=nil, pagesize=nil, policyname=nil, monitortypes=nil, namespaces=nil, dimensions=nil, receiveruids=nil, receivergroups=nil, policytype=nil, field=nil, order=nil, projectids=nil, noticeids=nil, ruletypes=nil, enable=nil, notbindingnoticerule=nil, instancegroupid=nil, needcorrespondence=nil, triggertasks=nil, oneclickpolicytype=nil, notbindall=nil, notinstancegroup=nil, tags=nil, prominsid=nil, receiveroncallformids=nil) @Module = _module @PageNumber = pagenumber @PageSize = pagesize @PolicyName = policyname @MonitorTypes = monitortypes @Namespaces = namespaces @Dimensions = dimensions @ReceiverUids = receiveruids @ReceiverGroups = receivergroups @PolicyType = policytype @Field = field @Order = order @ProjectIds = projectids @NoticeIds = noticeids @RuleTypes = ruletypes @Enable = enable @NotBindingNoticeRule = notbindingnoticerule @InstanceGroupId = instancegroupid @NeedCorrespondence = needcorrespondence @TriggerTasks = triggertasks @OneClickPolicyType = oneclickpolicytype @NotBindAll = notbindall @NotInstanceGroup = notinstancegroup @Tags = tags @PromInsId = prominsid @ReceiverOnCallFormIDs = receiveroncallformids end def deserialize(params) @Module = params['Module'] @PageNumber = params['PageNumber'] @PageSize = params['PageSize'] @PolicyName = params['PolicyName'] @MonitorTypes = params['MonitorTypes'] @Namespaces = params['Namespaces'] @Dimensions = params['Dimensions'] @ReceiverUids = params['ReceiverUids'] @ReceiverGroups = params['ReceiverGroups'] @PolicyType = params['PolicyType'] @Field = params['Field'] @Order = params['Order'] @ProjectIds = params['ProjectIds'] @NoticeIds = params['NoticeIds'] @RuleTypes = params['RuleTypes'] @Enable = params['Enable'] @NotBindingNoticeRule = params['NotBindingNoticeRule'] @InstanceGroupId = params['InstanceGroupId'] @NeedCorrespondence = params['NeedCorrespondence'] unless params['TriggerTasks'].nil? @TriggerTasks = [] params['TriggerTasks'].each do |i| alarmpolicytriggertask_tmp = AlarmPolicyTriggerTask.new alarmpolicytriggertask_tmp.deserialize(i) @TriggerTasks << alarmpolicytriggertask_tmp end end @OneClickPolicyType = params['OneClickPolicyType'] @NotBindAll = params['NotBindAll'] @NotInstanceGroup = params['NotInstanceGroup'] unless params['Tags'].nil? @Tags = [] params['Tags'].each do |i| tag_tmp = Tag.new tag_tmp.deserialize(i) @Tags << tag_tmp end end @PromInsId = params['PromInsId'] @ReceiverOnCallFormIDs = params['ReceiverOnCallFormIDs'] end end # DescribeAlarmPolicies返回参数结构体 class DescribeAlarmPoliciesResponse < TencentCloud::Common::AbstractModel # @param TotalCount: 策略总数 # @type TotalCount: Integer # @param Policies: 策略数组 # @type Policies: Array # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :TotalCount, :Policies, :RequestId def initialize(totalcount=nil, policies=nil, requestid=nil) @TotalCount = totalcount @Policies = policies @RequestId = requestid end def deserialize(params) @TotalCount = params['TotalCount'] unless params['Policies'].nil? @Policies = [] params['Policies'].each do |i| alarmpolicy_tmp = AlarmPolicy.new alarmpolicy_tmp.deserialize(i) @Policies << alarmpolicy_tmp end end @RequestId = params['RequestId'] end end # DescribeAlarmPolicy请求参数结构体 class DescribeAlarmPolicyRequest < TencentCloud::Common::AbstractModel # @param Module: 固定值,为"monitor" # @type Module: String # @param PolicyId: 告警策略ID # @type PolicyId: String attr_accessor :Module, :PolicyId def initialize(_module=nil, policyid=nil) @Module = _module @PolicyId = policyid end def deserialize(params) @Module = params['Module'] @PolicyId = params['PolicyId'] end end # DescribeAlarmPolicy返回参数结构体 class DescribeAlarmPolicyResponse < TencentCloud::Common::AbstractModel # @param Policy: 策略详情 # @type Policy: :class:`Tencentcloud::Monitor.v20180724.models.AlarmPolicy` # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Policy, :RequestId def initialize(policy=nil, requestid=nil) @Policy = policy @RequestId = requestid end def deserialize(params) unless params['Policy'].nil? @Policy = AlarmPolicy.new @Policy.deserialize(params['Policy']) end @RequestId = params['RequestId'] end end # DescribeAlarmSmsQuota接口的配额信息 class DescribeAlarmSmsQuotaQuota < TencentCloud::Common::AbstractModel # @param Type: 配额类型 # @type Type: String # @param Name: 配额名称 # @type Name: String # @param FreeLeft: 免费配额剩余量 # @type FreeLeft: Integer # @param PurchaseLeft: 付费配额剩余量 # @type PurchaseLeft: Integer # @param Used: 已使用量 # @type Used: Integer attr_accessor :Type, :Name, :FreeLeft, :PurchaseLeft, :Used def initialize(type=nil, name=nil, freeleft=nil, purchaseleft=nil, used=nil) @Type = type @Name = name @FreeLeft = freeleft @PurchaseLeft = purchaseleft @Used = used end def deserialize(params) @Type = params['Type'] @Name = params['Name'] @FreeLeft = params['FreeLeft'] @PurchaseLeft = params['PurchaseLeft'] @Used = params['Used'] end end # DescribeAlarmSmsQuota请求参数结构体 class DescribeAlarmSmsQuotaRequest < TencentCloud::Common::AbstractModel # @param Module: 固定值,为"monitor" # @type Module: String attr_accessor :Module def initialize(_module=nil) @Module = _module end def deserialize(params) @Module = params['Module'] end end # DescribeAlarmSmsQuota返回参数结构体 class DescribeAlarmSmsQuotaResponse < TencentCloud::Common::AbstractModel # @param Total: 配额总数 # @type Total: Integer # @param Used: 总使用量 # @type Used: Integer # @param QuotaList: 短信配额信息列表 # 注意:此字段可能返回 null,表示取不到有效值。 # @type QuotaList: Array # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Total, :Used, :QuotaList, :RequestId def initialize(total=nil, used=nil, quotalist=nil, requestid=nil) @Total = total @Used = used @QuotaList = quotalist @RequestId = requestid end def deserialize(params) @Total = params['Total'] @Used = params['Used'] unless params['QuotaList'].nil? @QuotaList = [] params['QuotaList'].each do |i| describealarmsmsquotaquota_tmp = DescribeAlarmSmsQuotaQuota.new describealarmsmsquotaquota_tmp.deserialize(i) @QuotaList << describealarmsmsquotaquota_tmp end end @RequestId = params['RequestId'] end end # DescribeAlertRules请求参数结构体 class DescribeAlertRulesRequest < TencentCloud::Common::AbstractModel # @param InstanceId: Prometheus 实例 ID # @type InstanceId: String # @param Limit: 返回数量,默认为 20,最大值为 100 # @type Limit: Integer # @param Offset: 偏移量,默认为 0 # @type Offset: Integer # @param RuleId: 规则 ID # @type RuleId: String # @param RuleState: 规则状态码,取值如下: #
  • 2=RuleEnabled
  • #
  • 3=RuleDisabled
  • # @type RuleState: Integer # @param RuleName: 规则名称 # @type RuleName: String # @param Type: 报警策略模板分类 # @type Type: String attr_accessor :InstanceId, :Limit, :Offset, :RuleId, :RuleState, :RuleName, :Type def initialize(instanceid=nil, limit=nil, offset=nil, ruleid=nil, rulestate=nil, rulename=nil, type=nil) @InstanceId = instanceid @Limit = limit @Offset = offset @RuleId = ruleid @RuleState = rulestate @RuleName = rulename @Type = type end def deserialize(params) @InstanceId = params['InstanceId'] @Limit = params['Limit'] @Offset = params['Offset'] @RuleId = params['RuleId'] @RuleState = params['RuleState'] @RuleName = params['RuleName'] @Type = params['Type'] end end # DescribeAlertRules返回参数结构体 class DescribeAlertRulesResponse < TencentCloud::Common::AbstractModel # @param TotalCount: 报警规则数量 # @type TotalCount: Integer # @param AlertRuleSet: 报警规则详情 # 注意:此字段可能返回 null,表示取不到有效值。 # @type AlertRuleSet: Array # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :TotalCount, :AlertRuleSet, :RequestId def initialize(totalcount=nil, alertruleset=nil, requestid=nil) @TotalCount = totalcount @AlertRuleSet = alertruleset @RequestId = requestid end def deserialize(params) @TotalCount = params['TotalCount'] unless params['AlertRuleSet'].nil? @AlertRuleSet = [] params['AlertRuleSet'].each do |i| prometheusruleset_tmp = PrometheusRuleSet.new prometheusruleset_tmp.deserialize(i) @AlertRuleSet << prometheusruleset_tmp end end @RequestId = params['RequestId'] end end # DescribeAllNamespaces请求参数结构体 class DescribeAllNamespacesRequest < TencentCloud::Common::AbstractModel # @param SceneType: 根据使用场景过滤 目前仅有"ST_ALARM"=告警类型 # @type SceneType: String # @param Module: 固定值,为"monitor" # @type Module: String # @param MonitorTypes: 根据监控类型过滤 不填默认查所有类型 "MT_QCE"=云产品监控 # @type MonitorTypes: Array # @param Ids: 根据namespace的Id过滤 不填默认查询所有 # @type Ids: Array attr_accessor :SceneType, :Module, :MonitorTypes, :Ids def initialize(scenetype=nil, _module=nil, monitortypes=nil, ids=nil) @SceneType = scenetype @Module = _module @MonitorTypes = monitortypes @Ids = ids end def deserialize(params) @SceneType = params['SceneType'] @Module = params['Module'] @MonitorTypes = params['MonitorTypes'] @Ids = params['Ids'] end end # DescribeAllNamespaces返回参数结构体 class DescribeAllNamespacesResponse < TencentCloud::Common::AbstractModel # @param QceNamespaces: 云产品的告警策略类型,已废弃 # @type QceNamespaces: :class:`Tencentcloud::Monitor.v20180724.models.CommonNamespace` # @param CustomNamespaces: 其他告警策略类型,已废弃 # @type CustomNamespaces: :class:`Tencentcloud::Monitor.v20180724.models.CommonNamespace` # @param QceNamespacesNew: 云产品的告警策略类型 # @type QceNamespacesNew: Array # @param CustomNamespacesNew: 其他告警策略类型,暂不支持 # @type CustomNamespacesNew: Array # @param CommonNamespaces: 通用告警策略类型(包括:应用性能监控,前端性能监控,云拨测) # 注意:此字段可能返回 null,表示取不到有效值。 # @type CommonNamespaces: Array # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :QceNamespaces, :CustomNamespaces, :QceNamespacesNew, :CustomNamespacesNew, :CommonNamespaces, :RequestId def initialize(qcenamespaces=nil, customnamespaces=nil, qcenamespacesnew=nil, customnamespacesnew=nil, commonnamespaces=nil, requestid=nil) @QceNamespaces = qcenamespaces @CustomNamespaces = customnamespaces @QceNamespacesNew = qcenamespacesnew @CustomNamespacesNew = customnamespacesnew @CommonNamespaces = commonnamespaces @RequestId = requestid end def deserialize(params) unless params['QceNamespaces'].nil? @QceNamespaces = CommonNamespace.new @QceNamespaces.deserialize(params['QceNamespaces']) end unless params['CustomNamespaces'].nil? @CustomNamespaces = CommonNamespace.new @CustomNamespaces.deserialize(params['CustomNamespaces']) end unless params['QceNamespacesNew'].nil? @QceNamespacesNew = [] params['QceNamespacesNew'].each do |i| commonnamespace_tmp = CommonNamespace.new commonnamespace_tmp.deserialize(i) @QceNamespacesNew << commonnamespace_tmp end end unless params['CustomNamespacesNew'].nil? @CustomNamespacesNew = [] params['CustomNamespacesNew'].each do |i| commonnamespace_tmp = CommonNamespace.new commonnamespace_tmp.deserialize(i) @CustomNamespacesNew << commonnamespace_tmp end end unless params['CommonNamespaces'].nil? @CommonNamespaces = [] params['CommonNamespaces'].each do |i| commonnamespacenew_tmp = CommonNamespaceNew.new commonnamespacenew_tmp.deserialize(i) @CommonNamespaces << commonnamespacenew_tmp end end @RequestId = params['RequestId'] end end # DescribeBaseMetrics请求参数结构体 class DescribeBaseMetricsRequest < TencentCloud::Common::AbstractModel # @param Namespace: 业务命名空间,各个云产品的业务命名空间不同。如需获取业务命名空间,请前往各产品监控指标文档,例如云服务器的命名空间,可参见 [云服务器监控指标](https://cloud.tencent.com/document/product/248/6843) # @type Namespace: String # @param MetricName: 指标名,各个云产品的指标名不同。如需获取指标名,请前往各产品监控指标文档,例如云服务器的指标名,可参见 [云服务器监控指标](https://cloud.tencent.com/document/product/248/6843) # @type MetricName: String # @param Dimensions: 可选参数,按照维度过滤 # @type Dimensions: Array attr_accessor :Namespace, :MetricName, :Dimensions def initialize(namespace=nil, metricname=nil, dimensions=nil) @Namespace = namespace @MetricName = metricname @Dimensions = dimensions end def deserialize(params) @Namespace = params['Namespace'] @MetricName = params['MetricName'] @Dimensions = params['Dimensions'] end end # DescribeBaseMetrics返回参数结构体 class DescribeBaseMetricsResponse < TencentCloud::Common::AbstractModel # @param MetricSet: 查询得到的指标描述列表 # @type MetricSet: Array # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :MetricSet, :RequestId def initialize(metricset=nil, requestid=nil) @MetricSet = metricset @RequestId = requestid end def deserialize(params) unless params['MetricSet'].nil? @MetricSet = [] params['MetricSet'].each do |i| metricset_tmp = MetricSet.new metricset_tmp.deserialize(i) @MetricSet << metricset_tmp end end @RequestId = params['RequestId'] end end # DescribeBasicAlarmList返回的Alarms class DescribeBasicAlarmListAlarms < TencentCloud::Common::AbstractModel # @param Id: 该条告警的ID # @type Id: Integer # @param ProjectId: 项目ID # 注意:此字段可能返回 null,表示取不到有效值。 # @type ProjectId: Integer # @param ProjectName: 项目名称 # 注意:此字段可能返回 null,表示取不到有效值。 # @type ProjectName: String # @param Status: 告警状态ID,0表示未恢复;1表示已恢复;2,3,5表示数据不足;4表示已失效 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Status: Integer # @param AlarmStatus: 告警状态,ALARM表示未恢复;OK表示已恢复;NO_DATA表示数据不足;NO_CONF表示已失效 # 注意:此字段可能返回 null,表示取不到有效值。 # @type AlarmStatus: String # @param GroupId: 策略组ID # 注意:此字段可能返回 null,表示取不到有效值。 # @type GroupId: Integer # @param GroupName: 策略组名 # 注意:此字段可能返回 null,表示取不到有效值。 # @type GroupName: String # @param FirstOccurTime: 发生时间 # 注意:此字段可能返回 null,表示取不到有效值。 # @type FirstOccurTime: String # @param Duration: 持续时间,单位s # 注意:此字段可能返回 null,表示取不到有效值。 # @type Duration: Integer # @param LastOccurTime: 结束时间 # 注意:此字段可能返回 null,表示取不到有效值。 # @type LastOccurTime: String # @param Content: 告警内容 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Content: String # @param ObjName: 告警对象 # 注意:此字段可能返回 null,表示取不到有效值。 # @type ObjName: String # @param ObjId: 告警对象ID # 注意:此字段可能返回 null,表示取不到有效值。 # @type ObjId: String # @param ViewName: 策略类型 # 注意:此字段可能返回 null,表示取不到有效值。 # @type ViewName: String # @param Vpc: VPC,只有CVM有 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Vpc: String # @param MetricId: 指标ID # 注意:此字段可能返回 null,表示取不到有效值。 # @type MetricId: Integer # @param MetricName: 指标名 # 注意:此字段可能返回 null,表示取不到有效值。 # @type MetricName: String # @param AlarmType: 告警类型,0表示指标告警,2表示产品事件告警,3表示平台事件告警 # 注意:此字段可能返回 null,表示取不到有效值。 # @type AlarmType: Integer # @param Region: 地域 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Region: String # @param Dimensions: 告警对象维度信息 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Dimensions: String # @param NotifyWay: 通知方式 # 注意:此字段可能返回 null,表示取不到有效值。 # @type NotifyWay: Array # @param InstanceGroup: 所属实例组信息 # 注意:此字段可能返回 null,表示取不到有效值。 # @type InstanceGroup: Array attr_accessor :Id, :ProjectId, :ProjectName, :Status, :AlarmStatus, :GroupId, :GroupName, :FirstOccurTime, :Duration, :LastOccurTime, :Content, :ObjName, :ObjId, :ViewName, :Vpc, :MetricId, :MetricName, :AlarmType, :Region, :Dimensions, :NotifyWay, :InstanceGroup def initialize(id=nil, projectid=nil, projectname=nil, status=nil, alarmstatus=nil, groupid=nil, groupname=nil, firstoccurtime=nil, duration=nil, lastoccurtime=nil, content=nil, objname=nil, objid=nil, viewname=nil, vpc=nil, metricid=nil, metricname=nil, alarmtype=nil, region=nil, dimensions=nil, notifyway=nil, instancegroup=nil) @Id = id @ProjectId = projectid @ProjectName = projectname @Status = status @AlarmStatus = alarmstatus @GroupId = groupid @GroupName = groupname @FirstOccurTime = firstoccurtime @Duration = duration @LastOccurTime = lastoccurtime @Content = content @ObjName = objname @ObjId = objid @ViewName = viewname @Vpc = vpc @MetricId = metricid @MetricName = metricname @AlarmType = alarmtype @Region = region @Dimensions = dimensions @NotifyWay = notifyway @InstanceGroup = instancegroup end def deserialize(params) @Id = params['Id'] @ProjectId = params['ProjectId'] @ProjectName = params['ProjectName'] @Status = params['Status'] @AlarmStatus = params['AlarmStatus'] @GroupId = params['GroupId'] @GroupName = params['GroupName'] @FirstOccurTime = params['FirstOccurTime'] @Duration = params['Duration'] @LastOccurTime = params['LastOccurTime'] @Content = params['Content'] @ObjName = params['ObjName'] @ObjId = params['ObjId'] @ViewName = params['ViewName'] @Vpc = params['Vpc'] @MetricId = params['MetricId'] @MetricName = params['MetricName'] @AlarmType = params['AlarmType'] @Region = params['Region'] @Dimensions = params['Dimensions'] @NotifyWay = params['NotifyWay'] unless params['InstanceGroup'].nil? @InstanceGroup = [] params['InstanceGroup'].each do |i| instancegroup_tmp = InstanceGroup.new instancegroup_tmp.deserialize(i) @InstanceGroup << instancegroup_tmp end end end end # DescribeBasicAlarmList请求参数结构体 class DescribeBasicAlarmListRequest < TencentCloud::Common::AbstractModel # @param Module: 接口模块名,当前取值monitor # @type Module: String # @param StartTime: 起始时间,默认一天前的时间戳 # @type StartTime: Integer # @param EndTime: 结束时间,默认当前时间戳 # @type EndTime: Integer # @param Limit: 分页参数,每页返回的数量,取值1~100,默认20 # @type Limit: Integer # @param Offset: 分页参数,页偏移量,从0开始计数,默认0 # @type Offset: Integer # @param OccurTimeOrder: 根据发生时间排序,取值ASC或DESC # @type OccurTimeOrder: String # @param ProjectIds: 根据项目ID过滤 # @type ProjectIds: Array # @param ViewNames: 根据策略类型过滤 # @type ViewNames: Array # @param AlarmStatus: 根据告警状态过滤 # @type AlarmStatus: Array # @param ObjLike: 根据告警对象过滤 # @type ObjLike: String # @param InstanceGroupIds: 根据实例组ID过滤 # @type InstanceGroupIds: Array # @param MetricNames: 根据指标名过滤 # @type MetricNames: Array attr_accessor :Module, :StartTime, :EndTime, :Limit, :Offset, :OccurTimeOrder, :ProjectIds, :ViewNames, :AlarmStatus, :ObjLike, :InstanceGroupIds, :MetricNames def initialize(_module=nil, starttime=nil, endtime=nil, limit=nil, offset=nil, occurtimeorder=nil, projectids=nil, viewnames=nil, alarmstatus=nil, objlike=nil, instancegroupids=nil, metricnames=nil) @Module = _module @StartTime = starttime @EndTime = endtime @Limit = limit @Offset = offset @OccurTimeOrder = occurtimeorder @ProjectIds = projectids @ViewNames = viewnames @AlarmStatus = alarmstatus @ObjLike = objlike @InstanceGroupIds = instancegroupids @MetricNames = metricnames end def deserialize(params) @Module = params['Module'] @StartTime = params['StartTime'] @EndTime = params['EndTime'] @Limit = params['Limit'] @Offset = params['Offset'] @OccurTimeOrder = params['OccurTimeOrder'] @ProjectIds = params['ProjectIds'] @ViewNames = params['ViewNames'] @AlarmStatus = params['AlarmStatus'] @ObjLike = params['ObjLike'] @InstanceGroupIds = params['InstanceGroupIds'] @MetricNames = params['MetricNames'] end end # DescribeBasicAlarmList返回参数结构体 class DescribeBasicAlarmListResponse < TencentCloud::Common::AbstractModel # @param Alarms: 告警列表 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Alarms: Array # @param Total: 总数 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Total: Integer # @param Warning: 备注信息 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Warning: String # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Alarms, :Total, :Warning, :RequestId def initialize(alarms=nil, total=nil, warning=nil, requestid=nil) @Alarms = alarms @Total = total @Warning = warning @RequestId = requestid end def deserialize(params) unless params['Alarms'].nil? @Alarms = [] params['Alarms'].each do |i| describebasicalarmlistalarms_tmp = DescribeBasicAlarmListAlarms.new describebasicalarmlistalarms_tmp.deserialize(i) @Alarms << describebasicalarmlistalarms_tmp end end @Total = params['Total'] @Warning = params['Warning'] @RequestId = params['RequestId'] end end # DescribeBindingPolicyObjectList接口的Dimension class DescribeBindingPolicyObjectListDimension < TencentCloud::Common::AbstractModel # @param RegionId: 地域id # @type RegionId: Integer # @param Region: 地域简称 # @type Region: String # @param Dimensions: 维度组合json字符串 # @type Dimensions: String # @param EventDimensions: 事件维度组合json字符串 # @type EventDimensions: String attr_accessor :RegionId, :Region, :Dimensions, :EventDimensions def initialize(regionid=nil, region=nil, dimensions=nil, eventdimensions=nil) @RegionId = regionid @Region = region @Dimensions = dimensions @EventDimensions = eventdimensions end def deserialize(params) @RegionId = params['RegionId'] @Region = params['Region'] @Dimensions = params['Dimensions'] @EventDimensions = params['EventDimensions'] end end # 查询策略绑定对象列表接口返回的对象实例信息 class DescribeBindingPolicyObjectListInstance < TencentCloud::Common::AbstractModel # @param UniqueId: 对象唯一id # @type UniqueId: String # @param Dimensions: 表示对象实例的维度集合,jsonObj字符串 # @type Dimensions: String # @param IsShielded: 对象是否被屏蔽,0表示未屏蔽,1表示被屏蔽 # @type IsShielded: Integer # @param Region: 对象所在的地域 # @type Region: String attr_accessor :UniqueId, :Dimensions, :IsShielded, :Region def initialize(uniqueid=nil, dimensions=nil, isshielded=nil, region=nil) @UniqueId = uniqueid @Dimensions = dimensions @IsShielded = isshielded @Region = region end def deserialize(params) @UniqueId = params['UniqueId'] @Dimensions = params['Dimensions'] @IsShielded = params['IsShielded'] @Region = params['Region'] end end # DescribeBindingPolicyObjectList返回的是实例分组信息 class DescribeBindingPolicyObjectListInstanceGroup < TencentCloud::Common::AbstractModel # @param InstanceGroupId: 实例分组id # @type InstanceGroupId: Integer # @param ViewName: 告警策略类型名称 # @type ViewName: String # @param LastEditUin: 最后编辑uin # @type LastEditUin: String # @param GroupName: 实例分组名称 # @type GroupName: String # @param InstanceSum: 实例数量 # @type InstanceSum: Integer # @param UpdateTime: 更新时间 # @type UpdateTime: Integer # @param InsertTime: 创建时间 # @type InsertTime: Integer # @param Regions: 实例所在的地域集合 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Regions: Array attr_accessor :InstanceGroupId, :ViewName, :LastEditUin, :GroupName, :InstanceSum, :UpdateTime, :InsertTime, :Regions def initialize(instancegroupid=nil, viewname=nil, lastedituin=nil, groupname=nil, instancesum=nil, updatetime=nil, inserttime=nil, regions=nil) @InstanceGroupId = instancegroupid @ViewName = viewname @LastEditUin = lastedituin @GroupName = groupname @InstanceSum = instancesum @UpdateTime = updatetime @InsertTime = inserttime @Regions = regions end def deserialize(params) @InstanceGroupId = params['InstanceGroupId'] @ViewName = params['ViewName'] @LastEditUin = params['LastEditUin'] @GroupName = params['GroupName'] @InstanceSum = params['InstanceSum'] @UpdateTime = params['UpdateTime'] @InsertTime = params['InsertTime'] @Regions = params['Regions'] end end # DescribeBindingPolicyObjectList请求参数结构体 class DescribeBindingPolicyObjectListRequest < TencentCloud::Common::AbstractModel # @param Module: 固定值,为"monitor" # @type Module: String # @param GroupId: 策略组id,如果有形如 policy-xxxx 的 id,请填到 PolicyId 字段中,本字段填 0 # @type GroupId: Integer # @param PolicyId: 告警策略id,形如 policy-xxxx,如果填入,则GroupId可以填0 # @type PolicyId: String # @param Limit: 每次返回的数量,取值1~100,默认20 # @type Limit: Integer # @param Offset: 偏移量,从0开始计数,默认0。举例来说,参数 Offset=0&Limit=20 返回第 0 到 19 项,Offset=20&Limit=20 返回第 20 到 39 项,以此类推 # @type Offset: Integer # @param Dimensions: 筛选对象的维度信息 # @type Dimensions: Array attr_accessor :Module, :GroupId, :PolicyId, :Limit, :Offset, :Dimensions def initialize(_module=nil, groupid=nil, policyid=nil, limit=nil, offset=nil, dimensions=nil) @Module = _module @GroupId = groupid @PolicyId = policyid @Limit = limit @Offset = offset @Dimensions = dimensions end def deserialize(params) @Module = params['Module'] @GroupId = params['GroupId'] @PolicyId = params['PolicyId'] @Limit = params['Limit'] @Offset = params['Offset'] unless params['Dimensions'].nil? @Dimensions = [] params['Dimensions'].each do |i| describebindingpolicyobjectlistdimension_tmp = DescribeBindingPolicyObjectListDimension.new describebindingpolicyobjectlistdimension_tmp.deserialize(i) @Dimensions << describebindingpolicyobjectlistdimension_tmp end end end end # DescribeBindingPolicyObjectList返回参数结构体 class DescribeBindingPolicyObjectListResponse < TencentCloud::Common::AbstractModel # @param List: 绑定的对象实例列表 # 注意:此字段可能返回 null,表示取不到有效值。 # @type List: Array # @param Total: 绑定的对象实例总数 # @type Total: Integer # @param NoShieldedSum: 未屏蔽的对象实例数 # @type NoShieldedSum: Integer # @param InstanceGroup: 绑定的实例分组信息,没有绑定实例分组则为空 # 注意:此字段可能返回 null,表示取不到有效值。 # @type InstanceGroup: :class:`Tencentcloud::Monitor.v20180724.models.DescribeBindingPolicyObjectListInstanceGroup` # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :List, :Total, :NoShieldedSum, :InstanceGroup, :RequestId def initialize(list=nil, total=nil, noshieldedsum=nil, instancegroup=nil, requestid=nil) @List = list @Total = total @NoShieldedSum = noshieldedsum @InstanceGroup = instancegroup @RequestId = requestid end def deserialize(params) unless params['List'].nil? @List = [] params['List'].each do |i| describebindingpolicyobjectlistinstance_tmp = DescribeBindingPolicyObjectListInstance.new describebindingpolicyobjectlistinstance_tmp.deserialize(i) @List << describebindingpolicyobjectlistinstance_tmp end end @Total = params['Total'] @NoShieldedSum = params['NoShieldedSum'] unless params['InstanceGroup'].nil? @InstanceGroup = DescribeBindingPolicyObjectListInstanceGroup.new @InstanceGroup.deserialize(params['InstanceGroup']) end @RequestId = params['RequestId'] end end # DescribeClusterAgentCreatingProgress请求参数结构体 class DescribeClusterAgentCreatingProgressRequest < TencentCloud::Common::AbstractModel def initialize() end def deserialize(params) end end # DescribeClusterAgentCreatingProgress返回参数结构体 class DescribeClusterAgentCreatingProgressResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # DescribeConditionsTemplateList请求参数结构体 class DescribeConditionsTemplateListRequest < TencentCloud::Common::AbstractModel # @param Module: 固定值,为"monitor" # @type Module: String # @param ViewName: 视图名,由 [DescribeAllNamespaces](https://cloud.tencent.com/document/product/248/48683) 获得。对于云产品监控,取接口出参的 QceNamespacesNew.N.Id,例如 cvm_device # @type ViewName: String # @param GroupName: 根据触发条件模板名称过滤查询 # @type GroupName: String # @param GroupID: 根据触发条件模板ID过滤查询 # @type GroupID: String # @param Limit: 分页参数,每页返回的数量,取值1~100,默认20 # @type Limit: Integer # @param Offset: 分页参数,页偏移量,从0开始计数,默认0 # @type Offset: Integer # @param UpdateTimeOrder: 指定按更新时间的排序方式,asc=升序, desc=降序 # @type UpdateTimeOrder: String # @param PolicyCountOrder: 指定按绑定策略数目的排序方式,asc=升序, desc=降序 # @type PolicyCountOrder: String attr_accessor :Module, :ViewName, :GroupName, :GroupID, :Limit, :Offset, :UpdateTimeOrder, :PolicyCountOrder def initialize(_module=nil, viewname=nil, groupname=nil, groupid=nil, limit=nil, offset=nil, updatetimeorder=nil, policycountorder=nil) @Module = _module @ViewName = viewname @GroupName = groupname @GroupID = groupid @Limit = limit @Offset = offset @UpdateTimeOrder = updatetimeorder @PolicyCountOrder = policycountorder end def deserialize(params) @Module = params['Module'] @ViewName = params['ViewName'] @GroupName = params['GroupName'] @GroupID = params['GroupID'] @Limit = params['Limit'] @Offset = params['Offset'] @UpdateTimeOrder = params['UpdateTimeOrder'] @PolicyCountOrder = params['PolicyCountOrder'] end end # DescribeConditionsTemplateList返回参数结构体 class DescribeConditionsTemplateListResponse < TencentCloud::Common::AbstractModel # @param Total: 模板总数 # @type Total: Integer # @param TemplateGroupList: 模板列表 # 注意:此字段可能返回 null,表示取不到有效值。 # @type TemplateGroupList: Array # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Total, :TemplateGroupList, :RequestId def initialize(total=nil, templategrouplist=nil, requestid=nil) @Total = total @TemplateGroupList = templategrouplist @RequestId = requestid end def deserialize(params) @Total = params['Total'] unless params['TemplateGroupList'].nil? @TemplateGroupList = [] params['TemplateGroupList'].each do |i| templategroup_tmp = TemplateGroup.new templategroup_tmp.deserialize(i) @TemplateGroupList << templategroup_tmp end end @RequestId = params['RequestId'] end end # DescribeDNSConfig请求参数结构体 class DescribeDNSConfigRequest < TencentCloud::Common::AbstractModel # @param InstanceId: Grafana 实例 ID,例如:grafana-abcdefgh # @type InstanceId: String attr_accessor :InstanceId def initialize(instanceid=nil) @InstanceId = instanceid end def deserialize(params) @InstanceId = params['InstanceId'] end end # DescribeDNSConfig返回参数结构体 class DescribeDNSConfigResponse < TencentCloud::Common::AbstractModel # @param NameServers: DNS 服务器数组 # @type NameServers: Array # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :NameServers, :RequestId def initialize(nameservers=nil, requestid=nil) @NameServers = nameservers @RequestId = requestid end def deserialize(params) @NameServers = params['NameServers'] @RequestId = params['RequestId'] end end # DescribeExporterIntegrations请求参数结构体 class DescribeExporterIntegrationsRequest < TencentCloud::Common::AbstractModel # @param InstanceId: 实例 ID # @type InstanceId: String # @param KubeType: Kubernetes 集群类型,可不填。取值如下: #
  • 1= 容器集群(TKE)
  • #
  • 2=弹性集群(EKS)
  • #
  • 3= Prometheus管理的弹性集群(MEKS)
  • # @type KubeType: Integer # @param ClusterId: 集群 ID,可不填 # @type ClusterId: String # @param Kind: 类型(不填返回全部集成。可通过 DescribePrometheusIntegrations 接口获取,取每一项中的 ExporterType 字段) # @type Kind: String # @param Name: 名字 # @type Name: String attr_accessor :InstanceId, :KubeType, :ClusterId, :Kind, :Name def initialize(instanceid=nil, kubetype=nil, clusterid=nil, kind=nil, name=nil) @InstanceId = instanceid @KubeType = kubetype @ClusterId = clusterid @Kind = kind @Name = name end def deserialize(params) @InstanceId = params['InstanceId'] @KubeType = params['KubeType'] @ClusterId = params['ClusterId'] @Kind = params['Kind'] @Name = params['Name'] end end # DescribeExporterIntegrations返回参数结构体 class DescribeExporterIntegrationsResponse < TencentCloud::Common::AbstractModel # @param IntegrationSet: 集成配置列表 # @type IntegrationSet: Array # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :IntegrationSet, :RequestId def initialize(integrationset=nil, requestid=nil) @IntegrationSet = integrationset @RequestId = requestid end def deserialize(params) unless params['IntegrationSet'].nil? @IntegrationSet = [] params['IntegrationSet'].each do |i| integrationconfiguration_tmp = IntegrationConfiguration.new integrationconfiguration_tmp.deserialize(i) @IntegrationSet << integrationconfiguration_tmp end end @RequestId = params['RequestId'] end end # DescribeGrafanaChannels请求参数结构体 class DescribeGrafanaChannelsRequest < TencentCloud::Common::AbstractModel # @param InstanceId: Grafana 实例 ID,例如:grafana-12345678 # @type InstanceId: String # @param Offset: 偏移量 # @type Offset: Integer # @param Limit: 查询数量 # @type Limit: Integer # @param ChannelName: 告警通道名称,例如:test # @type ChannelName: String # @param ChannelIds: 告警通道 ID,例如:nchannel-abcd1234 # @type ChannelIds: Array # @param ChannelState: 告警通道状态(不用填写,目前只有可用和删除状态,默认只能查询可用的告警通道) # @type ChannelState: Integer attr_accessor :InstanceId, :Offset, :Limit, :ChannelName, :ChannelIds, :ChannelState def initialize(instanceid=nil, offset=nil, limit=nil, channelname=nil, channelids=nil, channelstate=nil) @InstanceId = instanceid @Offset = offset @Limit = limit @ChannelName = channelname @ChannelIds = channelids @ChannelState = channelstate end def deserialize(params) @InstanceId = params['InstanceId'] @Offset = params['Offset'] @Limit = params['Limit'] @ChannelName = params['ChannelName'] @ChannelIds = params['ChannelIds'] @ChannelState = params['ChannelState'] end end # DescribeGrafanaChannels返回参数结构体 class DescribeGrafanaChannelsResponse < TencentCloud::Common::AbstractModel # @param NotificationChannelSet: 告警通道数组 # @type NotificationChannelSet: Array # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :NotificationChannelSet, :RequestId def initialize(notificationchannelset=nil, requestid=nil) @NotificationChannelSet = notificationchannelset @RequestId = requestid end def deserialize(params) unless params['NotificationChannelSet'].nil? @NotificationChannelSet = [] params['NotificationChannelSet'].each do |i| grafanachannel_tmp = GrafanaChannel.new grafanachannel_tmp.deserialize(i) @NotificationChannelSet << grafanachannel_tmp end end @RequestId = params['RequestId'] end end # DescribeGrafanaConfig请求参数结构体 class DescribeGrafanaConfigRequest < TencentCloud::Common::AbstractModel # @param InstanceId: Grafana 实例 ID,例如:grafana-12345678 # @type InstanceId: String attr_accessor :InstanceId def initialize(instanceid=nil) @InstanceId = instanceid end def deserialize(params) @InstanceId = params['InstanceId'] end end # DescribeGrafanaConfig返回参数结构体 class DescribeGrafanaConfigResponse < TencentCloud::Common::AbstractModel # @param Config: JSON 编码后的字符串 # @type Config: String # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Config, :RequestId def initialize(config=nil, requestid=nil) @Config = config @RequestId = requestid end def deserialize(params) @Config = params['Config'] @RequestId = params['RequestId'] end end # DescribeGrafanaEnvironments请求参数结构体 class DescribeGrafanaEnvironmentsRequest < TencentCloud::Common::AbstractModel # @param InstanceId: Grafana 实例 ID,例如:grafana-abcdefgh # @type InstanceId: String attr_accessor :InstanceId def initialize(instanceid=nil) @InstanceId = instanceid end def deserialize(params) @InstanceId = params['InstanceId'] end end # DescribeGrafanaEnvironments返回参数结构体 class DescribeGrafanaEnvironmentsResponse < TencentCloud::Common::AbstractModel # @param Envs: 环境变量字符串 # @type Envs: String # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Envs, :RequestId def initialize(envs=nil, requestid=nil) @Envs = envs @RequestId = requestid end def deserialize(params) @Envs = params['Envs'] @RequestId = params['RequestId'] end end # DescribeGrafanaInstances请求参数结构体 class DescribeGrafanaInstancesRequest < TencentCloud::Common::AbstractModel # @param Offset: 查询偏移量 # @type Offset: Integer # @param Limit: 查询数量 # @type Limit: Integer # @param InstanceIds: Grafana 实例 ID 数组 # @type InstanceIds: Array # @param InstanceName: Grafana 实例名,支持前缀模糊搜索 # @type InstanceName: String # @param InstanceStatus: 查询状态 # @type InstanceStatus: Array # @param TagFilters: 标签过滤数组 # @type TagFilters: Array attr_accessor :Offset, :Limit, :InstanceIds, :InstanceName, :InstanceStatus, :TagFilters def initialize(offset=nil, limit=nil, instanceids=nil, instancename=nil, instancestatus=nil, tagfilters=nil) @Offset = offset @Limit = limit @InstanceIds = instanceids @InstanceName = instancename @InstanceStatus = instancestatus @TagFilters = tagfilters end def deserialize(params) @Offset = params['Offset'] @Limit = params['Limit'] @InstanceIds = params['InstanceIds'] @InstanceName = params['InstanceName'] @InstanceStatus = params['InstanceStatus'] unless params['TagFilters'].nil? @TagFilters = [] params['TagFilters'].each do |i| prometheustag_tmp = PrometheusTag.new prometheustag_tmp.deserialize(i) @TagFilters << prometheustag_tmp end end end end # DescribeGrafanaInstances返回参数结构体 class DescribeGrafanaInstancesResponse < TencentCloud::Common::AbstractModel # @param InstanceSet: 已废弃,请使用 Instances # @type InstanceSet: Array # @param TotalCount: 符合查询条件的实例总数 # @type TotalCount: Integer # @param Instances: 实例列表 # @type Instances: Array # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :InstanceSet, :TotalCount, :Instances, :RequestId def initialize(instanceset=nil, totalcount=nil, instances=nil, requestid=nil) @InstanceSet = instanceset @TotalCount = totalcount @Instances = instances @RequestId = requestid end def deserialize(params) unless params['InstanceSet'].nil? @InstanceSet = [] params['InstanceSet'].each do |i| grafanainstanceinfo_tmp = GrafanaInstanceInfo.new grafanainstanceinfo_tmp.deserialize(i) @InstanceSet << grafanainstanceinfo_tmp end end @TotalCount = params['TotalCount'] unless params['Instances'].nil? @Instances = [] params['Instances'].each do |i| grafanainstanceinfo_tmp = GrafanaInstanceInfo.new grafanainstanceinfo_tmp.deserialize(i) @Instances << grafanainstanceinfo_tmp end end @RequestId = params['RequestId'] end end # DescribeGrafanaIntegrations请求参数结构体 class DescribeGrafanaIntegrationsRequest < TencentCloud::Common::AbstractModel # @param InstanceId: 实例 ID # @type InstanceId: String # @param IntegrationId: 集成 ID # @type IntegrationId: String # @param Kind: 类型 # @type Kind: String attr_accessor :InstanceId, :IntegrationId, :Kind def initialize(instanceid=nil, integrationid=nil, kind=nil) @InstanceId = instanceid @IntegrationId = integrationid @Kind = kind end def deserialize(params) @InstanceId = params['InstanceId'] @IntegrationId = params['IntegrationId'] @Kind = params['Kind'] end end # DescribeGrafanaIntegrations返回参数结构体 class DescribeGrafanaIntegrationsResponse < TencentCloud::Common::AbstractModel # @param IntegrationSet: 集成数组 # @type IntegrationSet: Array # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :IntegrationSet, :RequestId def initialize(integrationset=nil, requestid=nil) @IntegrationSet = integrationset @RequestId = requestid end def deserialize(params) unless params['IntegrationSet'].nil? @IntegrationSet = [] params['IntegrationSet'].each do |i| grafanaintegrationconfig_tmp = GrafanaIntegrationConfig.new grafanaintegrationconfig_tmp.deserialize(i) @IntegrationSet << grafanaintegrationconfig_tmp end end @RequestId = params['RequestId'] end end # DescribeGrafanaNotificationChannels请求参数结构体 class DescribeGrafanaNotificationChannelsRequest < TencentCloud::Common::AbstractModel # @param InstanceId: Grafana 实例 ID,例如:grafana-12345678 # @type InstanceId: String # @param Offset: 偏移量 # @type Offset: Integer # @param Limit: 查询数量 # @type Limit: Integer # @param ChannelName: 告警通道名称,例如:test # @type ChannelName: String # @param ChannelIDs: 告警通道 ID,例如:nchannel-abcd1234 # @type ChannelIDs: Array # @param ChannelState: 告警通道状态 # @type ChannelState: Integer attr_accessor :InstanceId, :Offset, :Limit, :ChannelName, :ChannelIDs, :ChannelState def initialize(instanceid=nil, offset=nil, limit=nil, channelname=nil, channelids=nil, channelstate=nil) @InstanceId = instanceid @Offset = offset @Limit = limit @ChannelName = channelname @ChannelIDs = channelids @ChannelState = channelstate end def deserialize(params) @InstanceId = params['InstanceId'] @Offset = params['Offset'] @Limit = params['Limit'] @ChannelName = params['ChannelName'] @ChannelIDs = params['ChannelIDs'] @ChannelState = params['ChannelState'] end end # DescribeGrafanaNotificationChannels返回参数结构体 class DescribeGrafanaNotificationChannelsResponse < TencentCloud::Common::AbstractModel # @param NotificationChannelSet: 告警通道数组 # @type NotificationChannelSet: Array # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :NotificationChannelSet, :RequestId def initialize(notificationchannelset=nil, requestid=nil) @NotificationChannelSet = notificationchannelset @RequestId = requestid end def deserialize(params) unless params['NotificationChannelSet'].nil? @NotificationChannelSet = [] params['NotificationChannelSet'].each do |i| grafananotificationchannel_tmp = GrafanaNotificationChannel.new grafananotificationchannel_tmp.deserialize(i) @NotificationChannelSet << grafananotificationchannel_tmp end end @RequestId = params['RequestId'] end end # DescribeGrafanaWhiteList请求参数结构体 class DescribeGrafanaWhiteListRequest < TencentCloud::Common::AbstractModel # @param InstanceId: Grafana 实例 ID,例如:grafana-abcdefgh # @type InstanceId: String attr_accessor :InstanceId def initialize(instanceid=nil) @InstanceId = instanceid end def deserialize(params) @InstanceId = params['InstanceId'] end end # DescribeGrafanaWhiteList返回参数结构体 class DescribeGrafanaWhiteListResponse < TencentCloud::Common::AbstractModel # @param WhiteList: 数组 # @type WhiteList: Array # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :WhiteList, :RequestId def initialize(whitelist=nil, requestid=nil) @WhiteList = whitelist @RequestId = requestid end def deserialize(params) @WhiteList = params['WhiteList'] @RequestId = params['RequestId'] end end # DescribeInstalledPlugins请求参数结构体 class DescribeInstalledPluginsRequest < TencentCloud::Common::AbstractModel # @param InstanceId: Grafana 实例 ID,例如:grafana-kleu3gt0 # @type InstanceId: String # @param PluginId: 按插件 ID 过滤,例如:grafana-piechart-panel,可通过接口 DescribeInstalledPlugins 查看已安装的插件 ID # @type PluginId: String attr_accessor :InstanceId, :PluginId def initialize(instanceid=nil, pluginid=nil) @InstanceId = instanceid @PluginId = pluginid end def deserialize(params) @InstanceId = params['InstanceId'] @PluginId = params['PluginId'] end end # DescribeInstalledPlugins返回参数结构体 class DescribeInstalledPluginsResponse < TencentCloud::Common::AbstractModel # @param PluginSet: 插件列表 # @type PluginSet: Array # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :PluginSet, :RequestId def initialize(pluginset=nil, requestid=nil) @PluginSet = pluginset @RequestId = requestid end def deserialize(params) unless params['PluginSet'].nil? @PluginSet = [] params['PluginSet'].each do |i| grafanaplugin_tmp = GrafanaPlugin.new grafanaplugin_tmp.deserialize(i) @PluginSet << grafanaplugin_tmp end end @RequestId = params['RequestId'] end end # DescribeMonitorResourceInfo请求参数结构体 class DescribeMonitorResourceInfoRequest < TencentCloud::Common::AbstractModel def initialize() end def deserialize(params) end end # DescribeMonitorResourceInfo返回参数结构体 class DescribeMonitorResourceInfoResponse < TencentCloud::Common::AbstractModel # @param PhoneAlarmNumber: 电话告警数量 # @type PhoneAlarmNumber: Integer # @param AdvancedMetricNumber: 高级指标数量 # @type AdvancedMetricNumber: Integer # @param APIUsageNumber: API调用量 # @type APIUsageNumber: Integer # @param AlarmSMSNumber: 告警短信数量 # @type AlarmSMSNumber: Integer # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :PhoneAlarmNumber, :AdvancedMetricNumber, :APIUsageNumber, :AlarmSMSNumber, :RequestId def initialize(phonealarmnumber=nil, advancedmetricnumber=nil, apiusagenumber=nil, alarmsmsnumber=nil, requestid=nil) @PhoneAlarmNumber = phonealarmnumber @AdvancedMetricNumber = advancedmetricnumber @APIUsageNumber = apiusagenumber @AlarmSMSNumber = alarmsmsnumber @RequestId = requestid end def deserialize(params) @PhoneAlarmNumber = params['PhoneAlarmNumber'] @AdvancedMetricNumber = params['AdvancedMetricNumber'] @APIUsageNumber = params['APIUsageNumber'] @AlarmSMSNumber = params['AlarmSMSNumber'] @RequestId = params['RequestId'] end end # DescribeMonitorTypes请求参数结构体 class DescribeMonitorTypesRequest < TencentCloud::Common::AbstractModel # @param Module: 模块名,固定值 monitor # @type Module: String attr_accessor :Module def initialize(_module=nil) @Module = _module end def deserialize(params) @Module = params['Module'] end end # DescribeMonitorTypes返回参数结构体 class DescribeMonitorTypesResponse < TencentCloud::Common::AbstractModel # @param MonitorTypes: 监控类型,云产品监控为 MT_QCE # @type MonitorTypes: Array # @param MonitorTypeInfos: 监控类型详情 # @type MonitorTypeInfos: Array # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :MonitorTypes, :MonitorTypeInfos, :RequestId def initialize(monitortypes=nil, monitortypeinfos=nil, requestid=nil) @MonitorTypes = monitortypes @MonitorTypeInfos = monitortypeinfos @RequestId = requestid end def deserialize(params) @MonitorTypes = params['MonitorTypes'] unless params['MonitorTypeInfos'].nil? @MonitorTypeInfos = [] params['MonitorTypeInfos'].each do |i| monitortypeinfo_tmp = MonitorTypeInfo.new monitortypeinfo_tmp.deserialize(i) @MonitorTypeInfos << monitortypeinfo_tmp end end @RequestId = params['RequestId'] end end # DescribePhoneAlarmFlowTotalCount请求参数结构体 class DescribePhoneAlarmFlowTotalCountRequest < TencentCloud::Common::AbstractModel # @param Module: 默认monitor # @type Module: String # @param QueryTime: unix时间戳,单位:s # @type QueryTime: Integer attr_accessor :Module, :QueryTime def initialize(_module=nil, querytime=nil) @Module = _module @QueryTime = querytime end def deserialize(params) @Module = params['Module'] @QueryTime = params['QueryTime'] end end # DescribePhoneAlarmFlowTotalCount返回参数结构体 class DescribePhoneAlarmFlowTotalCountResponse < TencentCloud::Common::AbstractModel # @param Count: 电话流水总数 # @type Count: Integer # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Count, :RequestId def initialize(count=nil, requestid=nil) @Count = count @RequestId = requestid end def deserialize(params) @Count = params['Count'] @RequestId = params['RequestId'] end end # DescribePluginOverviews请求参数结构体 class DescribePluginOverviewsRequest < TencentCloud::Common::AbstractModel def initialize() end def deserialize(params) end end # DescribePluginOverviews返回参数结构体 class DescribePluginOverviewsResponse < TencentCloud::Common::AbstractModel # @param PluginSet: 插件列表 # @type PluginSet: Array # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :PluginSet, :RequestId def initialize(pluginset=nil, requestid=nil) @PluginSet = pluginset @RequestId = requestid end def deserialize(params) unless params['PluginSet'].nil? @PluginSet = [] params['PluginSet'].each do |i| grafanaplugin_tmp = GrafanaPlugin.new grafanaplugin_tmp.deserialize(i) @PluginSet << grafanaplugin_tmp end end @RequestId = params['RequestId'] end end # DescribePolicyConditionList策略条件 class DescribePolicyConditionListCondition < TencentCloud::Common::AbstractModel # @param PolicyViewName: 策略视图名称 # @type PolicyViewName: String # @param EventMetrics: 事件告警条件 # 注意:此字段可能返回 null,表示取不到有效值。 # @type EventMetrics: Array # @param IsSupportMultiRegion: 是否支持多地域 # @type IsSupportMultiRegion: Boolean # @param Metrics: 指标告警条件 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Metrics: Array # @param Name: 策略类型名称 # @type Name: String # @param SortId: 排序id # @type SortId: Integer # @param SupportDefault: 是否支持默认策略 # @type SupportDefault: Boolean # @param SupportRegions: 支持该策略类型的地域列表 # 注意:此字段可能返回 null,表示取不到有效值。 # @type SupportRegions: Array # @param DeprecatingInfo: 弃用信息 # 注意:此字段可能返回 null,表示取不到有效值。 # @type DeprecatingInfo: :class:`Tencentcloud::Monitor.v20180724.models.DescribePolicyConditionListResponseDeprecatingInfo` attr_accessor :PolicyViewName, :EventMetrics, :IsSupportMultiRegion, :Metrics, :Name, :SortId, :SupportDefault, :SupportRegions, :DeprecatingInfo def initialize(policyviewname=nil, eventmetrics=nil, issupportmultiregion=nil, metrics=nil, name=nil, sortid=nil, supportdefault=nil, supportregions=nil, deprecatinginfo=nil) @PolicyViewName = policyviewname @EventMetrics = eventmetrics @IsSupportMultiRegion = issupportmultiregion @Metrics = metrics @Name = name @SortId = sortid @SupportDefault = supportdefault @SupportRegions = supportregions @DeprecatingInfo = deprecatinginfo end def deserialize(params) @PolicyViewName = params['PolicyViewName'] unless params['EventMetrics'].nil? @EventMetrics = [] params['EventMetrics'].each do |i| describepolicyconditionlisteventmetric_tmp = DescribePolicyConditionListEventMetric.new describepolicyconditionlisteventmetric_tmp.deserialize(i) @EventMetrics << describepolicyconditionlisteventmetric_tmp end end @IsSupportMultiRegion = params['IsSupportMultiRegion'] unless params['Metrics'].nil? @Metrics = [] params['Metrics'].each do |i| describepolicyconditionlistmetric_tmp = DescribePolicyConditionListMetric.new describepolicyconditionlistmetric_tmp.deserialize(i) @Metrics << describepolicyconditionlistmetric_tmp end end @Name = params['Name'] @SortId = params['SortId'] @SupportDefault = params['SupportDefault'] @SupportRegions = params['SupportRegions'] unless params['DeprecatingInfo'].nil? @DeprecatingInfo = DescribePolicyConditionListResponseDeprecatingInfo.new @DeprecatingInfo.deserialize(params['DeprecatingInfo']) end end end # DescribePolicyConditionList.ConfigManual class DescribePolicyConditionListConfigManual < TencentCloud::Common::AbstractModel # @param CalcType: 检测方式 # 注意:此字段可能返回 null,表示取不到有效值。 # @type CalcType: :class:`Tencentcloud::Monitor.v20180724.models.DescribePolicyConditionListConfigManualCalcType` # @param CalcValue: 检测阈值 # 注意:此字段可能返回 null,表示取不到有效值。 # @type CalcValue: :class:`Tencentcloud::Monitor.v20180724.models.DescribePolicyConditionListConfigManualCalcValue` # @param ContinueTime: 持续时间 # 注意:此字段可能返回 null,表示取不到有效值。 # @type ContinueTime: :class:`Tencentcloud::Monitor.v20180724.models.DescribePolicyConditionListConfigManualContinueTime` # @param Period: 数据周期 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Period: :class:`Tencentcloud::Monitor.v20180724.models.DescribePolicyConditionListConfigManualPeriod` # @param PeriodNum: 持续周期个数 # 注意:此字段可能返回 null,表示取不到有效值。 # @type PeriodNum: :class:`Tencentcloud::Monitor.v20180724.models.DescribePolicyConditionListConfigManualPeriodNum` # @param StatType: 聚合方式 # 注意:此字段可能返回 null,表示取不到有效值。 # @type StatType: :class:`Tencentcloud::Monitor.v20180724.models.DescribePolicyConditionListConfigManualStatType` attr_accessor :CalcType, :CalcValue, :ContinueTime, :Period, :PeriodNum, :StatType def initialize(calctype=nil, calcvalue=nil, continuetime=nil, period=nil, periodnum=nil, stattype=nil) @CalcType = calctype @CalcValue = calcvalue @ContinueTime = continuetime @Period = period @PeriodNum = periodnum @StatType = stattype end def deserialize(params) unless params['CalcType'].nil? @CalcType = DescribePolicyConditionListConfigManualCalcType.new @CalcType.deserialize(params['CalcType']) end unless params['CalcValue'].nil? @CalcValue = DescribePolicyConditionListConfigManualCalcValue.new @CalcValue.deserialize(params['CalcValue']) end unless params['ContinueTime'].nil? @ContinueTime = DescribePolicyConditionListConfigManualContinueTime.new @ContinueTime.deserialize(params['ContinueTime']) end unless params['Period'].nil? @Period = DescribePolicyConditionListConfigManualPeriod.new @Period.deserialize(params['Period']) end unless params['PeriodNum'].nil? @PeriodNum = DescribePolicyConditionListConfigManualPeriodNum.new @PeriodNum.deserialize(params['PeriodNum']) end unless params['StatType'].nil? @StatType = DescribePolicyConditionListConfigManualStatType.new @StatType.deserialize(params['StatType']) end end end # DescribePolicyConditionList.ConfigManual.CalcType class DescribePolicyConditionListConfigManualCalcType < TencentCloud::Common::AbstractModel # @param Keys: CalcType 取值 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Keys: Array # @param Need: 是否必须 # @type Need: Boolean attr_accessor :Keys, :Need def initialize(keys=nil, need=nil) @Keys = keys @Need = need end def deserialize(params) @Keys = params['Keys'] @Need = params['Need'] end end # DescribePolicyConditionList.ConfigManual.CalcValue class DescribePolicyConditionListConfigManualCalcValue < TencentCloud::Common::AbstractModel # @param Default: 默认值 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Default: String # @param Fixed: 固定值 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Fixed: String # @param Max: 最大值 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Max: String # @param Min: 最小值 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Min: String # @param Need: 是否必须 # @type Need: Boolean attr_accessor :Default, :Fixed, :Max, :Min, :Need def initialize(default=nil, fixed=nil, max=nil, min=nil, need=nil) @Default = default @Fixed = fixed @Max = max @Min = min @Need = need end def deserialize(params) @Default = params['Default'] @Fixed = params['Fixed'] @Max = params['Max'] @Min = params['Min'] @Need = params['Need'] end end # DescribePolicyConditionList.ConfigManual.ContinueTime class DescribePolicyConditionListConfigManualContinueTime < TencentCloud::Common::AbstractModel # @param Default: 默认持续时间,单位:秒 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Default: Integer # @param Keys: 可选持续时间,单位:秒 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Keys: Array # @param Need: 是否必须 # @type Need: Boolean attr_accessor :Default, :Keys, :Need def initialize(default=nil, keys=nil, need=nil) @Default = default @Keys = keys @Need = need end def deserialize(params) @Default = params['Default'] @Keys = params['Keys'] @Need = params['Need'] end end # DescribePolicyConditionList.ConfigManual.Period class DescribePolicyConditionListConfigManualPeriod < TencentCloud::Common::AbstractModel # @param Default: 默认周期,单位:秒 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Default: Integer # @param Keys: 可选周期,单位:秒 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Keys: Array # @param Need: 是否必须 # @type Need: Boolean attr_accessor :Default, :Keys, :Need def initialize(default=nil, keys=nil, need=nil) @Default = default @Keys = keys @Need = need end def deserialize(params) @Default = params['Default'] @Keys = params['Keys'] @Need = params['Need'] end end # DescribePolicyConditionList.ConfigManual.PeriodNum class DescribePolicyConditionListConfigManualPeriodNum < TencentCloud::Common::AbstractModel # @param Default: 默认周期数 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Default: Integer # @param Keys: 可选周期数 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Keys: Array # @param Need: 是否必须 # @type Need: Boolean attr_accessor :Default, :Keys, :Need def initialize(default=nil, keys=nil, need=nil) @Default = default @Keys = keys @Need = need end def deserialize(params) @Default = params['Default'] @Keys = params['Keys'] @Need = params['Need'] end end # DescribePolicyConditionList.ConfigManual.StatType class DescribePolicyConditionListConfigManualStatType < TencentCloud::Common::AbstractModel # @param P5: 数据聚合方式,周期5秒 # 注意:此字段可能返回 null,表示取不到有效值。 # @type P5: String # @param P10: 数据聚合方式,周期10秒 # 注意:此字段可能返回 null,表示取不到有效值。 # @type P10: String # @param P60: 数据聚合方式,周期1分钟 # 注意:此字段可能返回 null,表示取不到有效值。 # @type P60: String # @param P300: 数据聚合方式,周期5分钟 # 注意:此字段可能返回 null,表示取不到有效值。 # @type P300: String # @param P600: 数据聚合方式,周期10分钟 # 注意:此字段可能返回 null,表示取不到有效值。 # @type P600: String # @param P1800: 数据聚合方式,周期30分钟 # 注意:此字段可能返回 null,表示取不到有效值。 # @type P1800: String # @param P3600: 数据聚合方式,周期1小时 # 注意:此字段可能返回 null,表示取不到有效值。 # @type P3600: String # @param P86400: 数据聚合方式,周期1天 # 注意:此字段可能返回 null,表示取不到有效值。 # @type P86400: String attr_accessor :P5, :P10, :P60, :P300, :P600, :P1800, :P3600, :P86400 def initialize(p5=nil, p10=nil, p60=nil, p300=nil, p600=nil, p1800=nil, p3600=nil, p86400=nil) @P5 = p5 @P10 = p10 @P60 = p60 @P300 = p300 @P600 = p600 @P1800 = p1800 @P3600 = p3600 @P86400 = p86400 end def deserialize(params) @P5 = params['P5'] @P10 = params['P10'] @P60 = params['P60'] @P300 = params['P300'] @P600 = params['P600'] @P1800 = params['P1800'] @P3600 = params['P3600'] @P86400 = params['P86400'] end end # DescribePolicyConditionList.EventMetric class DescribePolicyConditionListEventMetric < TencentCloud::Common::AbstractModel # @param EventId: 事件id # @type EventId: Integer # @param EventShowName: 事件名称 # @type EventShowName: String # @param NeedRecovered: 是否需要恢复 # @type NeedRecovered: Boolean # @param Type: 事件类型,预留字段,当前固定取值为2 # @type Type: Integer attr_accessor :EventId, :EventShowName, :NeedRecovered, :Type def initialize(eventid=nil, eventshowname=nil, needrecovered=nil, type=nil) @EventId = eventid @EventShowName = eventshowname @NeedRecovered = needrecovered @Type = type end def deserialize(params) @EventId = params['EventId'] @EventShowName = params['EventShowName'] @NeedRecovered = params['NeedRecovered'] @Type = params['Type'] end end # 指标告警配置 class DescribePolicyConditionListMetric < TencentCloud::Common::AbstractModel # @param ConfigManual: 指标配置 # 注意:此字段可能返回 null,表示取不到有效值。 # @type ConfigManual: :class:`Tencentcloud::Monitor.v20180724.models.DescribePolicyConditionListConfigManual` # @param MetricId: 指标id # @type MetricId: Integer # @param MetricShowName: 指标名称 # @type MetricShowName: String # @param MetricUnit: 指标单位 # @type MetricUnit: String attr_accessor :ConfigManual, :MetricId, :MetricShowName, :MetricUnit def initialize(configmanual=nil, metricid=nil, metricshowname=nil, metricunit=nil) @ConfigManual = configmanual @MetricId = metricid @MetricShowName = metricshowname @MetricUnit = metricunit end def deserialize(params) unless params['ConfigManual'].nil? @ConfigManual = DescribePolicyConditionListConfigManual.new @ConfigManual.deserialize(params['ConfigManual']) end @MetricId = params['MetricId'] @MetricShowName = params['MetricShowName'] @MetricUnit = params['MetricUnit'] end end # DescribePolicyConditionList请求参数结构体 class DescribePolicyConditionListRequest < TencentCloud::Common::AbstractModel # @param Module: 固定值,为"monitor" # @type Module: String attr_accessor :Module def initialize(_module=nil) @Module = _module end def deserialize(params) @Module = params['Module'] end end # DescribePolicyConditionList返回参数结构体 class DescribePolicyConditionListResponse < TencentCloud::Common::AbstractModel # @param Conditions: 告警策略条件列表 # @type Conditions: Array # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Conditions, :RequestId def initialize(conditions=nil, requestid=nil) @Conditions = conditions @RequestId = requestid end def deserialize(params) unless params['Conditions'].nil? @Conditions = [] params['Conditions'].each do |i| describepolicyconditionlistcondition_tmp = DescribePolicyConditionListCondition.new describepolicyconditionlistcondition_tmp.deserialize(i) @Conditions << describepolicyconditionlistcondition_tmp end end @RequestId = params['RequestId'] end end # DescribePolicyConditionListResponseDeprecatingInfo class DescribePolicyConditionListResponseDeprecatingInfo < TencentCloud::Common::AbstractModel # @param Hidden: 是否隐藏 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Hidden: Boolean # @param NewViewNames: 新视图名称 # 注意:此字段可能返回 null,表示取不到有效值。 # @type NewViewNames: Array # @param Description: 描述 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Description: String attr_accessor :Hidden, :NewViewNames, :Description def initialize(hidden=nil, newviewnames=nil, description=nil) @Hidden = hidden @NewViewNames = newviewnames @Description = description end def deserialize(params) @Hidden = params['Hidden'] @NewViewNames = params['NewViewNames'] @Description = params['Description'] end end # 查询策略输出的用户回调信息 class DescribePolicyGroupInfoCallback < TencentCloud::Common::AbstractModel # @param CallbackUrl: 用户回调接口地址 # @type CallbackUrl: String # @param ValidFlag: 用户回调接口状态,0表示未验证,1表示已验证,2表示存在url但没有通过验证 # @type ValidFlag: Integer # @param VerifyCode: 用户回调接口验证码 # @type VerifyCode: String attr_accessor :CallbackUrl, :ValidFlag, :VerifyCode def initialize(callbackurl=nil, validflag=nil, verifycode=nil) @CallbackUrl = callbackurl @ValidFlag = validflag @VerifyCode = verifycode end def deserialize(params) @CallbackUrl = params['CallbackUrl'] @ValidFlag = params['ValidFlag'] @VerifyCode = params['VerifyCode'] end end # 查询策略输出的阈值告警条件 class DescribePolicyGroupInfoCondition < TencentCloud::Common::AbstractModel # @param MetricShowName: 指标名称 # @type MetricShowName: String # @param Period: 数据聚合周期(单位秒) # @type Period: Integer # @param MetricId: 指标id # @type MetricId: Integer # @param RuleId: 阈值规则id # @type RuleId: Integer # @param Unit: 指标单位 # @type Unit: String # @param AlarmNotifyType: 告警发送收敛类型。0连续告警,1指数告警 # @type AlarmNotifyType: Integer # @param AlarmNotifyPeriod: 告警发送周期单位秒。<0 不触发, 0 只触发一次, >0 每隔triggerTime秒触发一次 # @type AlarmNotifyPeriod: Integer # @param CalcType: 比较类型,1表示大于,2表示大于等于,3表示小于,4表示小于等于,5表示相等,6表示不相等,7表示日同比上涨,8表示日同比下降,9表示周同比上涨,10表示周同比下降,11表示周期环比上涨,12表示周期环比下降 # 注意:此字段可能返回 null,表示取不到有效值。 # @type CalcType: Integer # @param CalcValue: 检测阈值 # 注意:此字段可能返回 null,表示取不到有效值。 # @type CalcValue: String # @param ContinueTime: 持续多长时间触发规则会告警(单位秒) # 注意:此字段可能返回 null,表示取不到有效值。 # @type ContinueTime: Integer # @param MetricName: 告警指标名 # 注意:此字段可能返回 null,表示取不到有效值。 # @type MetricName: String attr_accessor :MetricShowName, :Period, :MetricId, :RuleId, :Unit, :AlarmNotifyType, :AlarmNotifyPeriod, :CalcType, :CalcValue, :ContinueTime, :MetricName def initialize(metricshowname=nil, period=nil, metricid=nil, ruleid=nil, unit=nil, alarmnotifytype=nil, alarmnotifyperiod=nil, calctype=nil, calcvalue=nil, continuetime=nil, metricname=nil) @MetricShowName = metricshowname @Period = period @MetricId = metricid @RuleId = ruleid @Unit = unit @AlarmNotifyType = alarmnotifytype @AlarmNotifyPeriod = alarmnotifyperiod @CalcType = calctype @CalcValue = calcvalue @ContinueTime = continuetime @MetricName = metricname end def deserialize(params) @MetricShowName = params['MetricShowName'] @Period = params['Period'] @MetricId = params['MetricId'] @RuleId = params['RuleId'] @Unit = params['Unit'] @AlarmNotifyType = params['AlarmNotifyType'] @AlarmNotifyPeriod = params['AlarmNotifyPeriod'] @CalcType = params['CalcType'] @CalcValue = params['CalcValue'] @ContinueTime = params['ContinueTime'] @MetricName = params['MetricName'] end end # 查询策略输出的模板策略组信息 class DescribePolicyGroupInfoConditionTpl < TencentCloud::Common::AbstractModel # @param GroupId: 策略组id # @type GroupId: Integer # @param GroupName: 策略组名称 # @type GroupName: String # @param ViewName: 策略类型 # @type ViewName: String # @param Remark: 策略组说明 # @type Remark: String # @param LastEditUin: 最后编辑的用户uin # @type LastEditUin: String # @param UpdateTime: 更新时间 # 注意:此字段可能返回 null,表示取不到有效值。 # @type UpdateTime: Integer # @param InsertTime: 创建时间 # 注意:此字段可能返回 null,表示取不到有效值。 # @type InsertTime: Integer # @param IsUnionRule: 是否且规则 # 注意:此字段可能返回 null,表示取不到有效值。 # @type IsUnionRule: Integer attr_accessor :GroupId, :GroupName, :ViewName, :Remark, :LastEditUin, :UpdateTime, :InsertTime, :IsUnionRule def initialize(groupid=nil, groupname=nil, viewname=nil, remark=nil, lastedituin=nil, updatetime=nil, inserttime=nil, isunionrule=nil) @GroupId = groupid @GroupName = groupname @ViewName = viewname @Remark = remark @LastEditUin = lastedituin @UpdateTime = updatetime @InsertTime = inserttime @IsUnionRule = isunionrule end def deserialize(params) @GroupId = params['GroupId'] @GroupName = params['GroupName'] @ViewName = params['ViewName'] @Remark = params['Remark'] @LastEditUin = params['LastEditUin'] @UpdateTime = params['UpdateTime'] @InsertTime = params['InsertTime'] @IsUnionRule = params['IsUnionRule'] end end # 查询策略输出的事件告警条件 class DescribePolicyGroupInfoEventCondition < TencentCloud::Common::AbstractModel # @param EventId: 事件id # @type EventId: Integer # @param RuleId: 事件告警规则id # @type RuleId: Integer # @param EventShowName: 事件名称 # @type EventShowName: String # @param AlarmNotifyPeriod: 告警发送周期单位秒。<0 不触发, 0 只触发一次, >0 每隔triggerTime秒触发一次 # @type AlarmNotifyPeriod: Integer # @param AlarmNotifyType: 告警发送收敛类型。0连续告警,1指数告警 # @type AlarmNotifyType: Integer attr_accessor :EventId, :RuleId, :EventShowName, :AlarmNotifyPeriod, :AlarmNotifyType def initialize(eventid=nil, ruleid=nil, eventshowname=nil, alarmnotifyperiod=nil, alarmnotifytype=nil) @EventId = eventid @RuleId = ruleid @EventShowName = eventshowname @AlarmNotifyPeriod = alarmnotifyperiod @AlarmNotifyType = alarmnotifytype end def deserialize(params) @EventId = params['EventId'] @RuleId = params['RuleId'] @EventShowName = params['EventShowName'] @AlarmNotifyPeriod = params['AlarmNotifyPeriod'] @AlarmNotifyType = params['AlarmNotifyType'] end end # 查询策略输出的告警接收人信息 class DescribePolicyGroupInfoReceiverInfo < TencentCloud::Common::AbstractModel # @param ReceiverGroupList: 告警接收组id列表 # @type ReceiverGroupList: Array # @param ReceiverUserList: 告警接收人id列表 # @type ReceiverUserList: Array # @param StartTime: 告警时间段开始时间。范围[0,86400),作为 UNIX 时间戳转成北京时间后去掉日期,例如7200表示"10:0:0" # @type StartTime: Integer # @param EndTime: 告警时间段结束时间。含义同StartTime # @type EndTime: Integer # @param ReceiverType: 接收类型。“group”(接收组)或“user”(接收人) # @type ReceiverType: String # @param NotifyWay: 告警通知方式。可选 "SMS","SITE","EMAIL","CALL","WECHAT" # @type NotifyWay: Array # @param UidList: 电话告警接收者uid # 注意:此字段可能返回 null,表示取不到有效值。 # @type UidList: Array # @param RoundNumber: 电话告警轮数 # @type RoundNumber: Integer # @param RoundInterval: 电话告警每轮间隔(秒) # @type RoundInterval: Integer # @param PersonInterval: 电话告警对个人间隔(秒) # @type PersonInterval: Integer # @param NeedSendNotice: 是否需要电话告警触达提示。0不需要,1需要 # @type NeedSendNotice: Integer # @param SendFor: 电话告警通知时机。可选"OCCUR"(告警时通知),"RECOVER"(恢复时通知) # @type SendFor: Array # @param RecoverNotify: 恢复通知方式。可选"SMS" # @type RecoverNotify: Array # @param ReceiveLanguage: 告警发送语言 # 注意:此字段可能返回 null,表示取不到有效值。 # @type ReceiveLanguage: String attr_accessor :ReceiverGroupList, :ReceiverUserList, :StartTime, :EndTime, :ReceiverType, :NotifyWay, :UidList, :RoundNumber, :RoundInterval, :PersonInterval, :NeedSendNotice, :SendFor, :RecoverNotify, :ReceiveLanguage def initialize(receivergrouplist=nil, receiveruserlist=nil, starttime=nil, endtime=nil, receivertype=nil, notifyway=nil, uidlist=nil, roundnumber=nil, roundinterval=nil, personinterval=nil, needsendnotice=nil, sendfor=nil, recovernotify=nil, receivelanguage=nil) @ReceiverGroupList = receivergrouplist @ReceiverUserList = receiveruserlist @StartTime = starttime @EndTime = endtime @ReceiverType = receivertype @NotifyWay = notifyway @UidList = uidlist @RoundNumber = roundnumber @RoundInterval = roundinterval @PersonInterval = personinterval @NeedSendNotice = needsendnotice @SendFor = sendfor @RecoverNotify = recovernotify @ReceiveLanguage = receivelanguage end def deserialize(params) @ReceiverGroupList = params['ReceiverGroupList'] @ReceiverUserList = params['ReceiverUserList'] @StartTime = params['StartTime'] @EndTime = params['EndTime'] @ReceiverType = params['ReceiverType'] @NotifyWay = params['NotifyWay'] @UidList = params['UidList'] @RoundNumber = params['RoundNumber'] @RoundInterval = params['RoundInterval'] @PersonInterval = params['PersonInterval'] @NeedSendNotice = params['NeedSendNotice'] @SendFor = params['SendFor'] @RecoverNotify = params['RecoverNotify'] @ReceiveLanguage = params['ReceiveLanguage'] end end # DescribePolicyGroupInfo请求参数结构体 class DescribePolicyGroupInfoRequest < TencentCloud::Common::AbstractModel # @param Module: 固定值,为"monitor" # @type Module: String # @param GroupId: 策略组id # @type GroupId: Integer attr_accessor :Module, :GroupId def initialize(_module=nil, groupid=nil) @Module = _module @GroupId = groupid end def deserialize(params) @Module = params['Module'] @GroupId = params['GroupId'] end end # DescribePolicyGroupInfo返回参数结构体 class DescribePolicyGroupInfoResponse < TencentCloud::Common::AbstractModel # @param GroupName: 策略组名称 # @type GroupName: String # @param ProjectId: 策略组所属的项目id # @type ProjectId: Integer # @param IsDefault: 是否为默认策略,0表示非默认策略,1表示默认策略 # @type IsDefault: Integer # @param ViewName: 策略类型 # @type ViewName: String # @param Remark: 策略说明 # @type Remark: String # @param ShowName: 策略类型名称 # @type ShowName: String # @param LastEditUin: 最近编辑的用户uin # @type LastEditUin: String # @param UpdateTime: 最近编辑时间 # @type UpdateTime: String # @param Region: 该策略支持的地域 # @type Region: Array # @param DimensionGroup: 策略类型的维度列表 # @type DimensionGroup: Array # @param ConditionsConfig: 阈值规则列表 # 注意:此字段可能返回 null,表示取不到有效值。 # @type ConditionsConfig: Array # @param EventConfig: 产品事件规则列表 # 注意:此字段可能返回 null,表示取不到有效值。 # @type EventConfig: Array # @param ReceiverInfos: 用户接收人列表 # 注意:此字段可能返回 null,表示取不到有效值。 # @type ReceiverInfos: Array # @param Callback: 用户回调信息 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Callback: :class:`Tencentcloud::Monitor.v20180724.models.DescribePolicyGroupInfoCallback` # @param ConditionsTemp: 模板策略组 # 注意:此字段可能返回 null,表示取不到有效值。 # @type ConditionsTemp: :class:`Tencentcloud::Monitor.v20180724.models.DescribePolicyGroupInfoConditionTpl` # @param CanSetDefault: 是否可以设置成默认策略 # @type CanSetDefault: Boolean # @param IsUnionRule: 是否且规则 # 注意:此字段可能返回 null,表示取不到有效值。 # @type IsUnionRule: Integer # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :GroupName, :ProjectId, :IsDefault, :ViewName, :Remark, :ShowName, :LastEditUin, :UpdateTime, :Region, :DimensionGroup, :ConditionsConfig, :EventConfig, :ReceiverInfos, :Callback, :ConditionsTemp, :CanSetDefault, :IsUnionRule, :RequestId def initialize(groupname=nil, projectid=nil, isdefault=nil, viewname=nil, remark=nil, showname=nil, lastedituin=nil, updatetime=nil, region=nil, dimensiongroup=nil, conditionsconfig=nil, eventconfig=nil, receiverinfos=nil, callback=nil, conditionstemp=nil, cansetdefault=nil, isunionrule=nil, requestid=nil) @GroupName = groupname @ProjectId = projectid @IsDefault = isdefault @ViewName = viewname @Remark = remark @ShowName = showname @LastEditUin = lastedituin @UpdateTime = updatetime @Region = region @DimensionGroup = dimensiongroup @ConditionsConfig = conditionsconfig @EventConfig = eventconfig @ReceiverInfos = receiverinfos @Callback = callback @ConditionsTemp = conditionstemp @CanSetDefault = cansetdefault @IsUnionRule = isunionrule @RequestId = requestid end def deserialize(params) @GroupName = params['GroupName'] @ProjectId = params['ProjectId'] @IsDefault = params['IsDefault'] @ViewName = params['ViewName'] @Remark = params['Remark'] @ShowName = params['ShowName'] @LastEditUin = params['LastEditUin'] @UpdateTime = params['UpdateTime'] @Region = params['Region'] @DimensionGroup = params['DimensionGroup'] unless params['ConditionsConfig'].nil? @ConditionsConfig = [] params['ConditionsConfig'].each do |i| describepolicygroupinfocondition_tmp = DescribePolicyGroupInfoCondition.new describepolicygroupinfocondition_tmp.deserialize(i) @ConditionsConfig << describepolicygroupinfocondition_tmp end end unless params['EventConfig'].nil? @EventConfig = [] params['EventConfig'].each do |i| describepolicygroupinfoeventcondition_tmp = DescribePolicyGroupInfoEventCondition.new describepolicygroupinfoeventcondition_tmp.deserialize(i) @EventConfig << describepolicygroupinfoeventcondition_tmp end end unless params['ReceiverInfos'].nil? @ReceiverInfos = [] params['ReceiverInfos'].each do |i| describepolicygroupinforeceiverinfo_tmp = DescribePolicyGroupInfoReceiverInfo.new describepolicygroupinforeceiverinfo_tmp.deserialize(i) @ReceiverInfos << describepolicygroupinforeceiverinfo_tmp end end unless params['Callback'].nil? @Callback = DescribePolicyGroupInfoCallback.new @Callback.deserialize(params['Callback']) end unless params['ConditionsTemp'].nil? @ConditionsTemp = DescribePolicyGroupInfoConditionTpl.new @ConditionsTemp.deserialize(params['ConditionsTemp']) end @CanSetDefault = params['CanSetDefault'] @IsUnionRule = params['IsUnionRule'] @RequestId = params['RequestId'] end end # DescribePolicyGroupList.Group class DescribePolicyGroupListGroup < TencentCloud::Common::AbstractModel # @param GroupId: 策略组id # @type GroupId: Integer # @param GroupName: 策略组名称 # @type GroupName: String # @param IsOpen: 是否开启 # @type IsOpen: Boolean # @param ViewName: 策略视图名称 # @type ViewName: String # @param LastEditUin: 最近编辑的用户uin # @type LastEditUin: String # @param UpdateTime: 最后修改时间 # @type UpdateTime: Integer # @param InsertTime: 创建时间 # @type InsertTime: Integer # @param UseSum: 策略组绑定的实例数 # @type UseSum: Integer # @param NoShieldedSum: 策略组绑定的未屏蔽实例数 # @type NoShieldedSum: Integer # @param IsDefault: 是否为默认策略,0表示非默认策略,1表示默认策略 # @type IsDefault: Integer # @param CanSetDefault: 是否可以设置成默认策略 # @type CanSetDefault: Boolean # @param ParentGroupId: 父策略组id # @type ParentGroupId: Integer # @param Remark: 策略组备注 # @type Remark: String # @param ProjectId: 策略组所属项目id # @type ProjectId: Integer # @param Conditions: 阈值规则列表 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Conditions: Array # @param EventConditions: 产品事件规则列表 # 注意:此字段可能返回 null,表示取不到有效值。 # @type EventConditions: Array # @param ReceiverInfos: 用户接收人列表 # 注意:此字段可能返回 null,表示取不到有效值。 # @type ReceiverInfos: Array # @param ConditionsTemp: 模板策略组 # 注意:此字段可能返回 null,表示取不到有效值。 # @type ConditionsTemp: :class:`Tencentcloud::Monitor.v20180724.models.DescribePolicyGroupInfoConditionTpl` # @param InstanceGroup: 策略组绑定的实例组信息 # 注意:此字段可能返回 null,表示取不到有效值。 # @type InstanceGroup: :class:`Tencentcloud::Monitor.v20180724.models.DescribePolicyGroupListGroupInstanceGroup` # @param IsUnionRule: 且或规则标识, 0表示或规则(任意一条规则满足阈值条件就告警), 1表示且规则(所有规则都满足阈值条件才告警) # 注意:此字段可能返回 null,表示取不到有效值。 # @type IsUnionRule: Integer attr_accessor :GroupId, :GroupName, :IsOpen, :ViewName, :LastEditUin, :UpdateTime, :InsertTime, :UseSum, :NoShieldedSum, :IsDefault, :CanSetDefault, :ParentGroupId, :Remark, :ProjectId, :Conditions, :EventConditions, :ReceiverInfos, :ConditionsTemp, :InstanceGroup, :IsUnionRule def initialize(groupid=nil, groupname=nil, isopen=nil, viewname=nil, lastedituin=nil, updatetime=nil, inserttime=nil, usesum=nil, noshieldedsum=nil, isdefault=nil, cansetdefault=nil, parentgroupid=nil, remark=nil, projectid=nil, conditions=nil, eventconditions=nil, receiverinfos=nil, conditionstemp=nil, instancegroup=nil, isunionrule=nil) @GroupId = groupid @GroupName = groupname @IsOpen = isopen @ViewName = viewname @LastEditUin = lastedituin @UpdateTime = updatetime @InsertTime = inserttime @UseSum = usesum @NoShieldedSum = noshieldedsum @IsDefault = isdefault @CanSetDefault = cansetdefault @ParentGroupId = parentgroupid @Remark = remark @ProjectId = projectid @Conditions = conditions @EventConditions = eventconditions @ReceiverInfos = receiverinfos @ConditionsTemp = conditionstemp @InstanceGroup = instancegroup @IsUnionRule = isunionrule end def deserialize(params) @GroupId = params['GroupId'] @GroupName = params['GroupName'] @IsOpen = params['IsOpen'] @ViewName = params['ViewName'] @LastEditUin = params['LastEditUin'] @UpdateTime = params['UpdateTime'] @InsertTime = params['InsertTime'] @UseSum = params['UseSum'] @NoShieldedSum = params['NoShieldedSum'] @IsDefault = params['IsDefault'] @CanSetDefault = params['CanSetDefault'] @ParentGroupId = params['ParentGroupId'] @Remark = params['Remark'] @ProjectId = params['ProjectId'] unless params['Conditions'].nil? @Conditions = [] params['Conditions'].each do |i| describepolicygroupinfocondition_tmp = DescribePolicyGroupInfoCondition.new describepolicygroupinfocondition_tmp.deserialize(i) @Conditions << describepolicygroupinfocondition_tmp end end unless params['EventConditions'].nil? @EventConditions = [] params['EventConditions'].each do |i| describepolicygroupinfoeventcondition_tmp = DescribePolicyGroupInfoEventCondition.new describepolicygroupinfoeventcondition_tmp.deserialize(i) @EventConditions << describepolicygroupinfoeventcondition_tmp end end unless params['ReceiverInfos'].nil? @ReceiverInfos = [] params['ReceiverInfos'].each do |i| describepolicygroupinforeceiverinfo_tmp = DescribePolicyGroupInfoReceiverInfo.new describepolicygroupinforeceiverinfo_tmp.deserialize(i) @ReceiverInfos << describepolicygroupinforeceiverinfo_tmp end end unless params['ConditionsTemp'].nil? @ConditionsTemp = DescribePolicyGroupInfoConditionTpl.new @ConditionsTemp.deserialize(params['ConditionsTemp']) end unless params['InstanceGroup'].nil? @InstanceGroup = DescribePolicyGroupListGroupInstanceGroup.new @InstanceGroup.deserialize(params['InstanceGroup']) end @IsUnionRule = params['IsUnionRule'] end end # DescribePolicyGroupList接口策略组绑定的实例分组信息 class DescribePolicyGroupListGroupInstanceGroup < TencentCloud::Common::AbstractModel # @param InstanceGroupId: 实例分组名称id # @type InstanceGroupId: Integer # @param ViewName: 策略类型视图名称 # @type ViewName: String # @param LastEditUin: 最近编辑的用户uin # @type LastEditUin: String # @param GroupName: 实例分组名称 # @type GroupName: String # @param InstanceSum: 实例数量 # @type InstanceSum: Integer # @param UpdateTime: 更新时间 # @type UpdateTime: Integer # @param InsertTime: 创建时间 # @type InsertTime: Integer attr_accessor :InstanceGroupId, :ViewName, :LastEditUin, :GroupName, :InstanceSum, :UpdateTime, :InsertTime def initialize(instancegroupid=nil, viewname=nil, lastedituin=nil, groupname=nil, instancesum=nil, updatetime=nil, inserttime=nil) @InstanceGroupId = instancegroupid @ViewName = viewname @LastEditUin = lastedituin @GroupName = groupname @InstanceSum = instancesum @UpdateTime = updatetime @InsertTime = inserttime end def deserialize(params) @InstanceGroupId = params['InstanceGroupId'] @ViewName = params['ViewName'] @LastEditUin = params['LastEditUin'] @GroupName = params['GroupName'] @InstanceSum = params['InstanceSum'] @UpdateTime = params['UpdateTime'] @InsertTime = params['InsertTime'] end end # DescribePolicyGroupList请求参数结构体 class DescribePolicyGroupListRequest < TencentCloud::Common::AbstractModel # @param Module: 固定值,为"monitor" # @type Module: String # @param Limit: 分页参数,每页返回的数量,取值1~100 # @type Limit: Integer # @param Offset: 分页参数,页偏移量,从0开始计数 # @type Offset: Integer # @param Like: 按策略名搜索 # @type Like: String # @param InstanceGroupId: 实例分组id # @type InstanceGroupId: Integer # @param UpdateTimeOrder: 按更新时间排序, asc 或者 desc # @type UpdateTimeOrder: String # @param ProjectIds: 项目id列表 # @type ProjectIds: Array # @param ViewNames: 告警策略类型列表 # @type ViewNames: Array # @param FilterUnuseReceiver: 是否过滤无接收人策略组, 1表示过滤, 0表示不过滤 # @type FilterUnuseReceiver: Integer # @param Receivers: 过滤条件, 接收组列表 # @type Receivers: Array # @param ReceiverUserList: 过滤条件, 接收人列表 # @type ReceiverUserList: Array # @param Dimensions: 维度组合字段(json字符串), 例如[[{"name":"unInstanceId","value":"ins-6e4b2aaa"}]] # @type Dimensions: String # @param ConditionTempGroupId: 模板策略组id, 多个id用逗号分隔 # @type ConditionTempGroupId: String # @param ReceiverType: 过滤条件, 接收人或者接收组, user表示接收人, group表示接收组 # @type ReceiverType: String # @param IsOpen: 过滤条件,告警策略是否已启动或停止 # @type IsOpen: Boolean attr_accessor :Module, :Limit, :Offset, :Like, :InstanceGroupId, :UpdateTimeOrder, :ProjectIds, :ViewNames, :FilterUnuseReceiver, :Receivers, :ReceiverUserList, :Dimensions, :ConditionTempGroupId, :ReceiverType, :IsOpen def initialize(_module=nil, limit=nil, offset=nil, like=nil, instancegroupid=nil, updatetimeorder=nil, projectids=nil, viewnames=nil, filterunusereceiver=nil, receivers=nil, receiveruserlist=nil, dimensions=nil, conditiontempgroupid=nil, receivertype=nil, isopen=nil) @Module = _module @Limit = limit @Offset = offset @Like = like @InstanceGroupId = instancegroupid @UpdateTimeOrder = updatetimeorder @ProjectIds = projectids @ViewNames = viewnames @FilterUnuseReceiver = filterunusereceiver @Receivers = receivers @ReceiverUserList = receiveruserlist @Dimensions = dimensions @ConditionTempGroupId = conditiontempgroupid @ReceiverType = receivertype @IsOpen = isopen end def deserialize(params) @Module = params['Module'] @Limit = params['Limit'] @Offset = params['Offset'] @Like = params['Like'] @InstanceGroupId = params['InstanceGroupId'] @UpdateTimeOrder = params['UpdateTimeOrder'] @ProjectIds = params['ProjectIds'] @ViewNames = params['ViewNames'] @FilterUnuseReceiver = params['FilterUnuseReceiver'] @Receivers = params['Receivers'] @ReceiverUserList = params['ReceiverUserList'] @Dimensions = params['Dimensions'] @ConditionTempGroupId = params['ConditionTempGroupId'] @ReceiverType = params['ReceiverType'] @IsOpen = params['IsOpen'] end end # DescribePolicyGroupList返回参数结构体 class DescribePolicyGroupListResponse < TencentCloud::Common::AbstractModel # @param GroupList: 策略组列表 # 注意:此字段可能返回 null,表示取不到有效值。 # @type GroupList: Array # @param Total: 策略组总数 # @type Total: Integer # @param Warning: 备注信息 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Warning: String # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :GroupList, :Total, :Warning, :RequestId def initialize(grouplist=nil, total=nil, warning=nil, requestid=nil) @GroupList = grouplist @Total = total @Warning = warning @RequestId = requestid end def deserialize(params) unless params['GroupList'].nil? @GroupList = [] params['GroupList'].each do |i| describepolicygrouplistgroup_tmp = DescribePolicyGroupListGroup.new describepolicygrouplistgroup_tmp.deserialize(i) @GroupList << describepolicygrouplistgroup_tmp end end @Total = params['Total'] @Warning = params['Warning'] @RequestId = params['RequestId'] end end # DescribeProductEventList的入参Dimensions class DescribeProductEventListDimensions < TencentCloud::Common::AbstractModel # @param Name: 维度名 # @type Name: String # @param Value: 维度值 # @type Value: String attr_accessor :Name, :Value def initialize(name=nil, value=nil) @Name = name @Value = value end def deserialize(params) @Name = params['Name'] @Value = params['Value'] end end # DescribeProductEventList返回的Events class DescribeProductEventListEvents < TencentCloud::Common::AbstractModel # @param EventId: 事件ID # 注意:此字段可能返回 null,表示取不到有效值。 # @type EventId: Integer # @param EventCName: 事件中文名 # 注意:此字段可能返回 null,表示取不到有效值。 # @type EventCName: String # @param EventEName: 事件英文名 # 注意:此字段可能返回 null,表示取不到有效值。 # @type EventEName: String # @param EventName: 事件简称 # 注意:此字段可能返回 null,表示取不到有效值。 # @type EventName: String # @param ProductCName: 产品中文名 # 注意:此字段可能返回 null,表示取不到有效值。 # @type ProductCName: String # @param ProductEName: 产品英文名 # 注意:此字段可能返回 null,表示取不到有效值。 # @type ProductEName: String # @param ProductName: 产品简称 # 注意:此字段可能返回 null,表示取不到有效值。 # @type ProductName: String # @param InstanceId: 实例ID # 注意:此字段可能返回 null,表示取不到有效值。 # @type InstanceId: String # @param InstanceName: 实例名称 # 注意:此字段可能返回 null,表示取不到有效值。 # @type InstanceName: String # @param ProjectId: 项目ID # 注意:此字段可能返回 null,表示取不到有效值。 # @type ProjectId: String # @param Region: 地域 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Region: String # @param Status: 状态 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Status: String # @param SupportAlarm: 是否支持告警 # 注意:此字段可能返回 null,表示取不到有效值。 # @type SupportAlarm: Integer # @param Type: 事件类型 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Type: String # @param StartTime: 开始时间 # 注意:此字段可能返回 null,表示取不到有效值。 # @type StartTime: Integer # @param UpdateTime: 更新时间 # 注意:此字段可能返回 null,表示取不到有效值。 # @type UpdateTime: Integer # @param Dimensions: 实例对象信息 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Dimensions: Array # @param AdditionMsg: 实例对象附加信息 # 注意:此字段可能返回 null,表示取不到有效值。 # @type AdditionMsg: Array # @param IsAlarmConfig: 是否配置告警 # 注意:此字段可能返回 null,表示取不到有效值。 # @type IsAlarmConfig: Integer # @param GroupInfo: 策略信息 # 注意:此字段可能返回 null,表示取不到有效值。 # @type GroupInfo: Array # @param ViewName: 显示名称ViewName # 注意:此字段可能返回 null,表示取不到有效值。 # @type ViewName: String attr_accessor :EventId, :EventCName, :EventEName, :EventName, :ProductCName, :ProductEName, :ProductName, :InstanceId, :InstanceName, :ProjectId, :Region, :Status, :SupportAlarm, :Type, :StartTime, :UpdateTime, :Dimensions, :AdditionMsg, :IsAlarmConfig, :GroupInfo, :ViewName def initialize(eventid=nil, eventcname=nil, eventename=nil, eventname=nil, productcname=nil, productename=nil, productname=nil, instanceid=nil, instancename=nil, projectid=nil, region=nil, status=nil, supportalarm=nil, type=nil, starttime=nil, updatetime=nil, dimensions=nil, additionmsg=nil, isalarmconfig=nil, groupinfo=nil, viewname=nil) @EventId = eventid @EventCName = eventcname @EventEName = eventename @EventName = eventname @ProductCName = productcname @ProductEName = productename @ProductName = productname @InstanceId = instanceid @InstanceName = instancename @ProjectId = projectid @Region = region @Status = status @SupportAlarm = supportalarm @Type = type @StartTime = starttime @UpdateTime = updatetime @Dimensions = dimensions @AdditionMsg = additionmsg @IsAlarmConfig = isalarmconfig @GroupInfo = groupinfo @ViewName = viewname end def deserialize(params) @EventId = params['EventId'] @EventCName = params['EventCName'] @EventEName = params['EventEName'] @EventName = params['EventName'] @ProductCName = params['ProductCName'] @ProductEName = params['ProductEName'] @ProductName = params['ProductName'] @InstanceId = params['InstanceId'] @InstanceName = params['InstanceName'] @ProjectId = params['ProjectId'] @Region = params['Region'] @Status = params['Status'] @SupportAlarm = params['SupportAlarm'] @Type = params['Type'] @StartTime = params['StartTime'] @UpdateTime = params['UpdateTime'] unless params['Dimensions'].nil? @Dimensions = [] params['Dimensions'].each do |i| describeproducteventlisteventsdimensions_tmp = DescribeProductEventListEventsDimensions.new describeproducteventlisteventsdimensions_tmp.deserialize(i) @Dimensions << describeproducteventlisteventsdimensions_tmp end end unless params['AdditionMsg'].nil? @AdditionMsg = [] params['AdditionMsg'].each do |i| describeproducteventlisteventsdimensions_tmp = DescribeProductEventListEventsDimensions.new describeproducteventlisteventsdimensions_tmp.deserialize(i) @AdditionMsg << describeproducteventlisteventsdimensions_tmp end end @IsAlarmConfig = params['IsAlarmConfig'] unless params['GroupInfo'].nil? @GroupInfo = [] params['GroupInfo'].each do |i| describeproducteventlisteventsgroupinfo_tmp = DescribeProductEventListEventsGroupInfo.new describeproducteventlisteventsgroupinfo_tmp.deserialize(i) @GroupInfo << describeproducteventlisteventsgroupinfo_tmp end end @ViewName = params['ViewName'] end end # DescribeProductEventList返回的Events的Dimensions class DescribeProductEventListEventsDimensions < TencentCloud::Common::AbstractModel # @param Key: 维度名(英文) # 注意:此字段可能返回 null,表示取不到有效值。 # @type Key: String # @param Name: 维度名(中文) # 注意:此字段可能返回 null,表示取不到有效值。 # @type Name: String # @param Value: 维度值 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Value: String attr_accessor :Key, :Name, :Value def initialize(key=nil, name=nil, value=nil) @Key = key @Name = name @Value = value end def deserialize(params) @Key = params['Key'] @Name = params['Name'] @Value = params['Value'] end end # DescribeProductEventList返回的Events里的GroupInfo class DescribeProductEventListEventsGroupInfo < TencentCloud::Common::AbstractModel # @param GroupId: 策略ID # 注意:此字段可能返回 null,表示取不到有效值。 # @type GroupId: Integer # @param GroupName: 策略名 # 注意:此字段可能返回 null,表示取不到有效值。 # @type GroupName: String attr_accessor :GroupId, :GroupName def initialize(groupid=nil, groupname=nil) @GroupId = groupid @GroupName = groupname end def deserialize(params) @GroupId = params['GroupId'] @GroupName = params['GroupName'] end end # DescribeProductEventList返回的OverView对象 class DescribeProductEventListOverView < TencentCloud::Common::AbstractModel # @param StatusChangeAmount: 状态变更的事件数量 # 注意:此字段可能返回 null,表示取不到有效值。 # @type StatusChangeAmount: Integer # @param UnConfigAlarmAmount: 告警状态未配置的事件数量 # 注意:此字段可能返回 null,表示取不到有效值。 # @type UnConfigAlarmAmount: Integer # @param UnNormalEventAmount: 异常事件数量 # 注意:此字段可能返回 null,表示取不到有效值。 # @type UnNormalEventAmount: Integer # @param UnRecoverAmount: 未恢复的事件数量 # 注意:此字段可能返回 null,表示取不到有效值。 # @type UnRecoverAmount: Integer attr_accessor :StatusChangeAmount, :UnConfigAlarmAmount, :UnNormalEventAmount, :UnRecoverAmount def initialize(statuschangeamount=nil, unconfigalarmamount=nil, unnormaleventamount=nil, unrecoveramount=nil) @StatusChangeAmount = statuschangeamount @UnConfigAlarmAmount = unconfigalarmamount @UnNormalEventAmount = unnormaleventamount @UnRecoverAmount = unrecoveramount end def deserialize(params) @StatusChangeAmount = params['StatusChangeAmount'] @UnConfigAlarmAmount = params['UnConfigAlarmAmount'] @UnNormalEventAmount = params['UnNormalEventAmount'] @UnRecoverAmount = params['UnRecoverAmount'] end end # DescribeProductEventList请求参数结构体 class DescribeProductEventListRequest < TencentCloud::Common::AbstractModel # @param Module: 接口模块名,固定值"monitor" # @type Module: String # @param ProductName: 产品类型过滤,例如"cvm"表示云服务器 # @type ProductName: Array # @param EventName: 事件名称过滤,例如"guest_reboot"表示机器重启 # @type EventName: Array # @param InstanceId: 影响对象,例如"ins-19708ino" # @type InstanceId: Array # @param Dimensions: 维度过滤,例如外网IP:10.0.0.1 # @type Dimensions: Array # @param RegionList: 产品事件地域过滤参数,例如gz,各地域缩写可参见[地域列表](https://cloud.tencent.com/document/product/248/50863) # @type RegionList: Array # @param Type: 事件类型过滤,取值范围["status_change","abnormal"],分别表示状态变更、异常事件 # @type Type: Array # @param Status: 事件状态过滤,取值范围["recover","alarm","-"],分别表示已恢复、未恢复、无状态 # @type Status: Array # @param Project: 项目ID过滤 # @type Project: Array # @param IsAlarmConfig: 告警状态配置过滤,1表示已配置,0表示未配置 # @type IsAlarmConfig: Integer # @param TimeOrder: 按更新时间排序,ASC表示升序,DESC表示降序,默认DESC # @type TimeOrder: String # @param StartTime: 起始时间,默认一天前的时间戳 # @type StartTime: Integer # @param EndTime: 结束时间,默认当前时间戳 # @type EndTime: Integer # @param Offset: 页偏移量,默认0 # @type Offset: Integer # @param Limit: 每页返回的数量,默认20 # @type Limit: Integer attr_accessor :Module, :ProductName, :EventName, :InstanceId, :Dimensions, :RegionList, :Type, :Status, :Project, :IsAlarmConfig, :TimeOrder, :StartTime, :EndTime, :Offset, :Limit def initialize(_module=nil, productname=nil, eventname=nil, instanceid=nil, dimensions=nil, regionlist=nil, type=nil, status=nil, project=nil, isalarmconfig=nil, timeorder=nil, starttime=nil, endtime=nil, offset=nil, limit=nil) @Module = _module @ProductName = productname @EventName = eventname @InstanceId = instanceid @Dimensions = dimensions @RegionList = regionlist @Type = type @Status = status @Project = project @IsAlarmConfig = isalarmconfig @TimeOrder = timeorder @StartTime = starttime @EndTime = endtime @Offset = offset @Limit = limit end def deserialize(params) @Module = params['Module'] @ProductName = params['ProductName'] @EventName = params['EventName'] @InstanceId = params['InstanceId'] unless params['Dimensions'].nil? @Dimensions = [] params['Dimensions'].each do |i| describeproducteventlistdimensions_tmp = DescribeProductEventListDimensions.new describeproducteventlistdimensions_tmp.deserialize(i) @Dimensions << describeproducteventlistdimensions_tmp end end @RegionList = params['RegionList'] @Type = params['Type'] @Status = params['Status'] @Project = params['Project'] @IsAlarmConfig = params['IsAlarmConfig'] @TimeOrder = params['TimeOrder'] @StartTime = params['StartTime'] @EndTime = params['EndTime'] @Offset = params['Offset'] @Limit = params['Limit'] end end # DescribeProductEventList返回参数结构体 class DescribeProductEventListResponse < TencentCloud::Common::AbstractModel # @param Events: 事件列表 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Events: Array # @param OverView: 事件统计 # @type OverView: :class:`Tencentcloud::Monitor.v20180724.models.DescribeProductEventListOverView` # @param Total: 事件总数 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Total: Integer # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Events, :OverView, :Total, :RequestId def initialize(events=nil, overview=nil, total=nil, requestid=nil) @Events = events @OverView = overview @Total = total @RequestId = requestid end def deserialize(params) unless params['Events'].nil? @Events = [] params['Events'].each do |i| describeproducteventlistevents_tmp = DescribeProductEventListEvents.new describeproducteventlistevents_tmp.deserialize(i) @Events << describeproducteventlistevents_tmp end end unless params['OverView'].nil? @OverView = DescribeProductEventListOverView.new @OverView.deserialize(params['OverView']) end @Total = params['Total'] @RequestId = params['RequestId'] end end # DescribeProductList请求参数结构体 class DescribeProductListRequest < TencentCloud::Common::AbstractModel # @param Module: 固定传值monitor # @type Module: String # @param Order: 排序方式:DESC/ASC(区分大小写),默认值DESC # @type Order: String # @param Offset: 分页查询的偏移量,默认值0 # @type Offset: Integer # @param Limit: 分页查询的每页数据量,默认值20 # @type Limit: Integer attr_accessor :Module, :Order, :Offset, :Limit def initialize(_module=nil, order=nil, offset=nil, limit=nil) @Module = _module @Order = order @Offset = offset @Limit = limit end def deserialize(params) @Module = params['Module'] @Order = params['Order'] @Offset = params['Offset'] @Limit = params['Limit'] end end # DescribeProductList返回参数结构体 class DescribeProductListResponse < TencentCloud::Common::AbstractModel # @param ProductList: 产品信息列表 # 注意:此字段可能返回 null,表示取不到有效值。 # @type ProductList: Array # @param TotalCount: 产品总数 # 注意:此字段可能返回 null,表示取不到有效值。 # @type TotalCount: Integer # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :ProductList, :TotalCount, :RequestId def initialize(productlist=nil, totalcount=nil, requestid=nil) @ProductList = productlist @TotalCount = totalcount @RequestId = requestid end def deserialize(params) unless params['ProductList'].nil? @ProductList = [] params['ProductList'].each do |i| productsimple_tmp = ProductSimple.new productsimple_tmp.deserialize(i) @ProductList << productsimple_tmp end end @TotalCount = params['TotalCount'] @RequestId = params['RequestId'] end end # DescribePrometheusAgentInstances请求参数结构体 class DescribePrometheusAgentInstancesRequest < TencentCloud::Common::AbstractModel # @param ClusterId: 集群id # 可以是tke, eks, edge的集群id # @type ClusterId: String attr_accessor :ClusterId def initialize(clusterid=nil) @ClusterId = clusterid end def deserialize(params) @ClusterId = params['ClusterId'] end end # DescribePrometheusAgentInstances返回参数结构体 class DescribePrometheusAgentInstancesResponse < TencentCloud::Common::AbstractModel # @param Instances: 关联该集群的实例列表 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Instances: Array # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Instances, :RequestId def initialize(instances=nil, requestid=nil) @Instances = instances @RequestId = requestid end def deserialize(params) @Instances = params['Instances'] @RequestId = params['RequestId'] end end # DescribePrometheusAgents请求参数结构体 class DescribePrometheusAgentsRequest < TencentCloud::Common::AbstractModel # @param InstanceId: 实例 ID # @type InstanceId: String # @param Name: Agent 名称 # @type Name: String # @param AgentIds: Agent ID 列表 # @type AgentIds: Array # @param Offset: 偏移量,默认为0 # @type Offset: Integer # @param Limit: 返回数量,默认为20,最大值为100 # @type Limit: Integer attr_accessor :InstanceId, :Name, :AgentIds, :Offset, :Limit def initialize(instanceid=nil, name=nil, agentids=nil, offset=nil, limit=nil) @InstanceId = instanceid @Name = name @AgentIds = agentids @Offset = offset @Limit = limit end def deserialize(params) @InstanceId = params['InstanceId'] @Name = params['Name'] @AgentIds = params['AgentIds'] @Offset = params['Offset'] @Limit = params['Limit'] end end # DescribePrometheusAgents返回参数结构体 class DescribePrometheusAgentsResponse < TencentCloud::Common::AbstractModel # @param AgentSet: Agent 列表 # 注意:此字段可能返回 null,表示取不到有效值。 # @type AgentSet: Array # @param TotalCount: Agent 总量 # @type TotalCount: Integer # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :AgentSet, :TotalCount, :RequestId def initialize(agentset=nil, totalcount=nil, requestid=nil) @AgentSet = agentset @TotalCount = totalcount @RequestId = requestid end def deserialize(params) unless params['AgentSet'].nil? @AgentSet = [] params['AgentSet'].each do |i| prometheusagent_tmp = PrometheusAgent.new prometheusagent_tmp.deserialize(i) @AgentSet << prometheusagent_tmp end end @TotalCount = params['TotalCount'] @RequestId = params['RequestId'] end end # DescribePrometheusAlertGroups请求参数结构体 class DescribePrometheusAlertGroupsRequest < TencentCloud::Common::AbstractModel # @param InstanceId: Prometheus 实例 ID # @type InstanceId: String # @param Limit: 返回数量,默认为 20,最大值为 100 # @type Limit: Integer # @param Offset: 偏移量,默认为 0 # @type Offset: Integer # @param GroupId: 告警分组ID,形如alert-xxxx。 # 查询给定ID的告警分组 # @type GroupId: String # @param GroupName: 告警分组名称。 # 查询名称中包含给定字符串的告警分组 # @type GroupName: String attr_accessor :InstanceId, :Limit, :Offset, :GroupId, :GroupName def initialize(instanceid=nil, limit=nil, offset=nil, groupid=nil, groupname=nil) @InstanceId = instanceid @Limit = limit @Offset = offset @GroupId = groupid @GroupName = groupname end def deserialize(params) @InstanceId = params['InstanceId'] @Limit = params['Limit'] @Offset = params['Offset'] @GroupId = params['GroupId'] @GroupName = params['GroupName'] end end # DescribePrometheusAlertGroups返回参数结构体 class DescribePrometheusAlertGroupsResponse < TencentCloud::Common::AbstractModel # @param AlertGroupSet: 告警分组信息 # 注意:此字段可能返回 null,表示取不到有效值。 # @type AlertGroupSet: Array # @param TotalCount: 告警分组总数 # 注意:此字段可能返回 null,表示取不到有效值。 # @type TotalCount: Integer # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :AlertGroupSet, :TotalCount, :RequestId def initialize(alertgroupset=nil, totalcount=nil, requestid=nil) @AlertGroupSet = alertgroupset @TotalCount = totalcount @RequestId = requestid end def deserialize(params) unless params['AlertGroupSet'].nil? @AlertGroupSet = [] params['AlertGroupSet'].each do |i| prometheusalertgroupset_tmp = PrometheusAlertGroupSet.new prometheusalertgroupset_tmp.deserialize(i) @AlertGroupSet << prometheusalertgroupset_tmp end end @TotalCount = params['TotalCount'] @RequestId = params['RequestId'] end end # DescribePrometheusAlertPolicy请求参数结构体 class DescribePrometheusAlertPolicyRequest < TencentCloud::Common::AbstractModel # @param InstanceId: 实例ID # @type InstanceId: String # @param Offset: 分页偏移量,默认为0。 示例值:1 # @type Offset: Integer # @param Limit: 分页返回数量,默认为20,最大值为100 # @type Limit: Integer # @param Filters: 仅支持按Name, Values字段过滤: # - Name = Name # 按照给定的告警规则名称列表匹配 # - Name = ID # 按照给定的告警规则ID列表匹配 # @type Filters: Array attr_accessor :InstanceId, :Offset, :Limit, :Filters def initialize(instanceid=nil, offset=nil, limit=nil, filters=nil) @InstanceId = instanceid @Offset = offset @Limit = limit @Filters = filters end def deserialize(params) @InstanceId = params['InstanceId'] @Offset = params['Offset'] @Limit = params['Limit'] unless params['Filters'].nil? @Filters = [] params['Filters'].each do |i| filter_tmp = Filter.new filter_tmp.deserialize(i) @Filters << filter_tmp end end end end # DescribePrometheusAlertPolicy返回参数结构体 class DescribePrometheusAlertPolicyResponse < TencentCloud::Common::AbstractModel # @param AlertRules: 告警详情 # 注意:此字段可能返回 null,表示取不到有效值。 # @type AlertRules: Array # @param Total: 总数 # @type Total: Integer # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :AlertRules, :Total, :RequestId def initialize(alertrules=nil, total=nil, requestid=nil) @AlertRules = alertrules @Total = total @RequestId = requestid end def deserialize(params) unless params['AlertRules'].nil? @AlertRules = [] params['AlertRules'].each do |i| prometheusalertpolicyitem_tmp = PrometheusAlertPolicyItem.new prometheusalertpolicyitem_tmp.deserialize(i) @AlertRules << prometheusalertpolicyitem_tmp end end @Total = params['Total'] @RequestId = params['RequestId'] end end # DescribePrometheusClusterAgents请求参数结构体 class DescribePrometheusClusterAgentsRequest < TencentCloud::Common::AbstractModel # @param InstanceId: 实例id # @type InstanceId: String # @param Offset: 偏移量,默认为0。 # @type Offset: Integer # @param Limit: 返回数量,默认为20,最大值为100。 # @type Limit: Integer # @param ClusterIds: 用于通过集群id过滤被绑定集群 # @type ClusterIds: Array # @param ClusterTypes: 用于通过集群类型过滤被绑定集群 # @type ClusterTypes: Array # @param ClusterName: 用于通过名称搜索被绑定集群 # @type ClusterName: String attr_accessor :InstanceId, :Offset, :Limit, :ClusterIds, :ClusterTypes, :ClusterName def initialize(instanceid=nil, offset=nil, limit=nil, clusterids=nil, clustertypes=nil, clustername=nil) @InstanceId = instanceid @Offset = offset @Limit = limit @ClusterIds = clusterids @ClusterTypes = clustertypes @ClusterName = clustername end def deserialize(params) @InstanceId = params['InstanceId'] @Offset = params['Offset'] @Limit = params['Limit'] @ClusterIds = params['ClusterIds'] @ClusterTypes = params['ClusterTypes'] @ClusterName = params['ClusterName'] end end # DescribePrometheusClusterAgents返回参数结构体 class DescribePrometheusClusterAgentsResponse < TencentCloud::Common::AbstractModel # @param Agents: 被关联集群信息 # @type Agents: Array # @param Total: 被关联集群总量 # @type Total: Integer # @param IsFirstBind: 是否为首次绑定,如果是首次绑定则需要安装预聚合规则 # @type IsFirstBind: Boolean # @param ImageNeedUpdate: 实例组件是否需要更新镜像版本 # @type ImageNeedUpdate: Boolean # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Agents, :Total, :IsFirstBind, :ImageNeedUpdate, :RequestId def initialize(agents=nil, total=nil, isfirstbind=nil, imageneedupdate=nil, requestid=nil) @Agents = agents @Total = total @IsFirstBind = isfirstbind @ImageNeedUpdate = imageneedupdate @RequestId = requestid end def deserialize(params) unless params['Agents'].nil? @Agents = [] params['Agents'].each do |i| prometheusagentoverview_tmp = PrometheusAgentOverview.new prometheusagentoverview_tmp.deserialize(i) @Agents << prometheusagentoverview_tmp end end @Total = params['Total'] @IsFirstBind = params['IsFirstBind'] @ImageNeedUpdate = params['ImageNeedUpdate'] @RequestId = params['RequestId'] end end # DescribePrometheusConfig请求参数结构体 class DescribePrometheusConfigRequest < TencentCloud::Common::AbstractModel # @param InstanceId: 实例id # @type InstanceId: String # @param ClusterId: 集群id # @type ClusterId: String # @param ClusterType: 集群类型 # @type ClusterType: String attr_accessor :InstanceId, :ClusterId, :ClusterType def initialize(instanceid=nil, clusterid=nil, clustertype=nil) @InstanceId = instanceid @ClusterId = clusterid @ClusterType = clustertype end def deserialize(params) @InstanceId = params['InstanceId'] @ClusterId = params['ClusterId'] @ClusterType = params['ClusterType'] end end # DescribePrometheusConfig返回参数结构体 class DescribePrometheusConfigResponse < TencentCloud::Common::AbstractModel # @param Config: 全局配置 # @type Config: String # @param ServiceMonitors: ServiceMonitor配置 # @type ServiceMonitors: Array # @param PodMonitors: PodMonitor配置 # @type PodMonitors: Array # @param RawJobs: 原生Job # @type RawJobs: Array # @param Probes: Probes # @type Probes: Array # @param ImageNeedUpdate: 实例组件是否需要升级 # @type ImageNeedUpdate: Boolean # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Config, :ServiceMonitors, :PodMonitors, :RawJobs, :Probes, :ImageNeedUpdate, :RequestId def initialize(config=nil, servicemonitors=nil, podmonitors=nil, rawjobs=nil, probes=nil, imageneedupdate=nil, requestid=nil) @Config = config @ServiceMonitors = servicemonitors @PodMonitors = podmonitors @RawJobs = rawjobs @Probes = probes @ImageNeedUpdate = imageneedupdate @RequestId = requestid end def deserialize(params) @Config = params['Config'] unless params['ServiceMonitors'].nil? @ServiceMonitors = [] params['ServiceMonitors'].each do |i| prometheusconfigitem_tmp = PrometheusConfigItem.new prometheusconfigitem_tmp.deserialize(i) @ServiceMonitors << prometheusconfigitem_tmp end end unless params['PodMonitors'].nil? @PodMonitors = [] params['PodMonitors'].each do |i| prometheusconfigitem_tmp = PrometheusConfigItem.new prometheusconfigitem_tmp.deserialize(i) @PodMonitors << prometheusconfigitem_tmp end end unless params['RawJobs'].nil? @RawJobs = [] params['RawJobs'].each do |i| prometheusconfigitem_tmp = PrometheusConfigItem.new prometheusconfigitem_tmp.deserialize(i) @RawJobs << prometheusconfigitem_tmp end end unless params['Probes'].nil? @Probes = [] params['Probes'].each do |i| prometheusconfigitem_tmp = PrometheusConfigItem.new prometheusconfigitem_tmp.deserialize(i) @Probes << prometheusconfigitem_tmp end end @ImageNeedUpdate = params['ImageNeedUpdate'] @RequestId = params['RequestId'] end end # DescribePrometheusGlobalConfig请求参数结构体 class DescribePrometheusGlobalConfigRequest < TencentCloud::Common::AbstractModel # @param InstanceId: 实例级别抓取配置 # @type InstanceId: String # @param DisableStatistics: 是否禁用统计 # @type DisableStatistics: Boolean attr_accessor :InstanceId, :DisableStatistics def initialize(instanceid=nil, disablestatistics=nil) @InstanceId = instanceid @DisableStatistics = disablestatistics end def deserialize(params) @InstanceId = params['InstanceId'] @DisableStatistics = params['DisableStatistics'] end end # DescribePrometheusGlobalConfig返回参数结构体 class DescribePrometheusGlobalConfigResponse < TencentCloud::Common::AbstractModel # @param Config: 配置内容 # @type Config: String # @param ServiceMonitors: ServiceMonitors列表以及对应targets信息 # 注意:此字段可能返回 null,表示取不到有效值。 # @type ServiceMonitors: Array # @param PodMonitors: PodMonitors列表以及对应targets信息 # 注意:此字段可能返回 null,表示取不到有效值。 # @type PodMonitors: Array # @param RawJobs: RawJobs列表以及对应targets信息 # 注意:此字段可能返回 null,表示取不到有效值。 # @type RawJobs: Array # @param Probes: Probes列表以及对应targets信息 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Probes: Array # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Config, :ServiceMonitors, :PodMonitors, :RawJobs, :Probes, :RequestId def initialize(config=nil, servicemonitors=nil, podmonitors=nil, rawjobs=nil, probes=nil, requestid=nil) @Config = config @ServiceMonitors = servicemonitors @PodMonitors = podmonitors @RawJobs = rawjobs @Probes = probes @RequestId = requestid end def deserialize(params) @Config = params['Config'] unless params['ServiceMonitors'].nil? @ServiceMonitors = [] params['ServiceMonitors'].each do |i| prometheusconfigitem_tmp = PrometheusConfigItem.new prometheusconfigitem_tmp.deserialize(i) @ServiceMonitors << prometheusconfigitem_tmp end end unless params['PodMonitors'].nil? @PodMonitors = [] params['PodMonitors'].each do |i| prometheusconfigitem_tmp = PrometheusConfigItem.new prometheusconfigitem_tmp.deserialize(i) @PodMonitors << prometheusconfigitem_tmp end end unless params['RawJobs'].nil? @RawJobs = [] params['RawJobs'].each do |i| prometheusconfigitem_tmp = PrometheusConfigItem.new prometheusconfigitem_tmp.deserialize(i) @RawJobs << prometheusconfigitem_tmp end end unless params['Probes'].nil? @Probes = [] params['Probes'].each do |i| prometheusconfigitem_tmp = PrometheusConfigItem.new prometheusconfigitem_tmp.deserialize(i) @Probes << prometheusconfigitem_tmp end end @RequestId = params['RequestId'] end end # DescribePrometheusGlobalNotification请求参数结构体 class DescribePrometheusGlobalNotificationRequest < TencentCloud::Common::AbstractModel # @param InstanceId: 实例ID # @type InstanceId: String attr_accessor :InstanceId def initialize(instanceid=nil) @InstanceId = instanceid end def deserialize(params) @InstanceId = params['InstanceId'] end end # DescribePrometheusGlobalNotification返回参数结构体 class DescribePrometheusGlobalNotificationResponse < TencentCloud::Common::AbstractModel # @param Notification: 全局告警通知渠道 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Notification: :class:`Tencentcloud::Monitor.v20180724.models.PrometheusNotificationItem` # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Notification, :RequestId def initialize(notification=nil, requestid=nil) @Notification = notification @RequestId = requestid end def deserialize(params) unless params['Notification'].nil? @Notification = PrometheusNotificationItem.new @Notification.deserialize(params['Notification']) end @RequestId = params['RequestId'] end end # DescribePrometheusInstanceDetail请求参数结构体 class DescribePrometheusInstanceDetailRequest < TencentCloud::Common::AbstractModel # @param InstanceId: 实例ID # @type InstanceId: String attr_accessor :InstanceId def initialize(instanceid=nil) @InstanceId = instanceid end def deserialize(params) @InstanceId = params['InstanceId'] end end # DescribePrometheusInstanceDetail返回参数结构体 class DescribePrometheusInstanceDetailResponse < TencentCloud::Common::AbstractModel # @param InstanceId: 实例ID # @type InstanceId: String # @param InstanceName: 实例名称 # @type InstanceName: String # @param VpcId: VPC ID # @type VpcId: String # @param SubnetId: 子网 ID # @type SubnetId: String # @param InstanceStatus: 实例业务状态。取值范围: # 1:正在创建 # 2:运行中 # 3:异常 # 4:重建中 # 5:销毁中 # 6:已停服 # 8:欠费停服中 # 9:欠费已停服 # @type InstanceStatus: Integer # @param ChargeStatus: 计费状态 # 1:正常 # 2:过期 # 3:销毁 # 4:分配中 # 5:分配失败 # 注意:此字段可能返回 null,表示取不到有效值。 # @type ChargeStatus: Integer # @param EnableGrafana: 是否开启 Grafana # 0:不开启 # 1:开启 # @type EnableGrafana: Integer # @param GrafanaURL: Grafana 面板 URL # 注意:此字段可能返回 null,表示取不到有效值。 # @type GrafanaURL: String # @param InstanceChargeType: 实例计费模式。取值范围: # 2:包年包月 # 3:按量 # @type InstanceChargeType: Integer # @param SpecName: 规格名称 # 注意:此字段可能返回 null,表示取不到有效值。 # @type SpecName: String # @param DataRetentionTime: 存储周期 # 注意:此字段可能返回 null,表示取不到有效值。 # @type DataRetentionTime: Integer # @param ExpireTime: 购买的实例过期时间 # 注意:此字段可能返回 null,表示取不到有效值。 # @type ExpireTime: String # @param AutoRenewFlag: 自动续费标记 # 0:不自动续费 # 1:开启自动续费 # 2:禁止自动续费 # -1:无效 # 注意:此字段可能返回 null,表示取不到有效值。 # @type AutoRenewFlag: Integer # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :InstanceId, :InstanceName, :VpcId, :SubnetId, :InstanceStatus, :ChargeStatus, :EnableGrafana, :GrafanaURL, :InstanceChargeType, :SpecName, :DataRetentionTime, :ExpireTime, :AutoRenewFlag, :RequestId def initialize(instanceid=nil, instancename=nil, vpcid=nil, subnetid=nil, instancestatus=nil, chargestatus=nil, enablegrafana=nil, grafanaurl=nil, instancechargetype=nil, specname=nil, dataretentiontime=nil, expiretime=nil, autorenewflag=nil, requestid=nil) @InstanceId = instanceid @InstanceName = instancename @VpcId = vpcid @SubnetId = subnetid @InstanceStatus = instancestatus @ChargeStatus = chargestatus @EnableGrafana = enablegrafana @GrafanaURL = grafanaurl @InstanceChargeType = instancechargetype @SpecName = specname @DataRetentionTime = dataretentiontime @ExpireTime = expiretime @AutoRenewFlag = autorenewflag @RequestId = requestid end def deserialize(params) @InstanceId = params['InstanceId'] @InstanceName = params['InstanceName'] @VpcId = params['VpcId'] @SubnetId = params['SubnetId'] @InstanceStatus = params['InstanceStatus'] @ChargeStatus = params['ChargeStatus'] @EnableGrafana = params['EnableGrafana'] @GrafanaURL = params['GrafanaURL'] @InstanceChargeType = params['InstanceChargeType'] @SpecName = params['SpecName'] @DataRetentionTime = params['DataRetentionTime'] @ExpireTime = params['ExpireTime'] @AutoRenewFlag = params['AutoRenewFlag'] @RequestId = params['RequestId'] end end # DescribePrometheusInstanceInitStatus请求参数结构体 class DescribePrometheusInstanceInitStatusRequest < TencentCloud::Common::AbstractModel # @param InstanceId: 实例ID # @type InstanceId: String attr_accessor :InstanceId def initialize(instanceid=nil) @InstanceId = instanceid end def deserialize(params) @InstanceId = params['InstanceId'] end end # DescribePrometheusInstanceInitStatus返回参数结构体 class DescribePrometheusInstanceInitStatusResponse < TencentCloud::Common::AbstractModel # @param Status: 实例初始化状态,取值: # uninitialized 未初始化 # initializing 初始化中 # running 初始化完成,运行中 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Status: String # @param Steps: 初始化任务步骤 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Steps: Array # @param EksClusterId: 实例eks集群ID # 注意:此字段可能返回 null,表示取不到有效值。 # @type EksClusterId: String # @param SecurityGroupId: eks集群内pod的安全组 # 注意:此字段可能返回 null,表示取不到有效值。 # @type SecurityGroupId: String # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Status, :Steps, :EksClusterId, :SecurityGroupId, :RequestId def initialize(status=nil, steps=nil, eksclusterid=nil, securitygroupid=nil, requestid=nil) @Status = status @Steps = steps @EksClusterId = eksclusterid @SecurityGroupId = securitygroupid @RequestId = requestid end def deserialize(params) @Status = params['Status'] unless params['Steps'].nil? @Steps = [] params['Steps'].each do |i| taskstepinfo_tmp = TaskStepInfo.new taskstepinfo_tmp.deserialize(i) @Steps << taskstepinfo_tmp end end @EksClusterId = params['EksClusterId'] @SecurityGroupId = params['SecurityGroupId'] @RequestId = params['RequestId'] end end # DescribePrometheusInstanceUsage请求参数结构体 class DescribePrometheusInstanceUsageRequest < TencentCloud::Common::AbstractModel # @param InstanceIds: 按照一个或者多个实例ID查询。实例ID形如:prom-xxxxxxxx。 # @type InstanceIds: Array # @param StartCalcDate: 开始时间 # @type StartCalcDate: String # @param EndCalcDate: 结束时间 # @type EndCalcDate: String attr_accessor :InstanceIds, :StartCalcDate, :EndCalcDate def initialize(instanceids=nil, startcalcdate=nil, endcalcdate=nil) @InstanceIds = instanceids @StartCalcDate = startcalcdate @EndCalcDate = endcalcdate end def deserialize(params) @InstanceIds = params['InstanceIds'] @StartCalcDate = params['StartCalcDate'] @EndCalcDate = params['EndCalcDate'] end end # DescribePrometheusInstanceUsage返回参数结构体 class DescribePrometheusInstanceUsageResponse < TencentCloud::Common::AbstractModel # @param UsageSet: 用量列表 # 注意:此字段可能返回 null,表示取不到有效值。 # @type UsageSet: Array # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :UsageSet, :RequestId def initialize(usageset=nil, requestid=nil) @UsageSet = usageset @RequestId = requestid end def deserialize(params) unless params['UsageSet'].nil? @UsageSet = [] params['UsageSet'].each do |i| prometheusinstancetenantusage_tmp = PrometheusInstanceTenantUsage.new prometheusinstancetenantusage_tmp.deserialize(i) @UsageSet << prometheusinstancetenantusage_tmp end end @RequestId = params['RequestId'] end end # DescribePrometheusInstancesOverview请求参数结构体 class DescribePrometheusInstancesOverviewRequest < TencentCloud::Common::AbstractModel # @param Offset: 分页偏移量,默认为0 # @type Offset: Integer # @param Limit: 返回数量,默认为20,最大值为100 # @type Limit: Integer # @param Filters: 过滤实例,目前支持: # ID: 通过实例ID来过滤 # Name: 通过实例名称来过滤 # @type Filters: Array attr_accessor :Offset, :Limit, :Filters def initialize(offset=nil, limit=nil, filters=nil) @Offset = offset @Limit = limit @Filters = filters end def deserialize(params) @Offset = params['Offset'] @Limit = params['Limit'] unless params['Filters'].nil? @Filters = [] params['Filters'].each do |i| filter_tmp = Filter.new filter_tmp.deserialize(i) @Filters << filter_tmp end end end end # DescribePrometheusInstancesOverview返回参数结构体 class DescribePrometheusInstancesOverviewResponse < TencentCloud::Common::AbstractModel # @param Instances: 实例列表 # @type Instances: Array # @param Total: 实例总数 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Total: Integer # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Instances, :Total, :RequestId def initialize(instances=nil, total=nil, requestid=nil) @Instances = instances @Total = total @RequestId = requestid end def deserialize(params) unless params['Instances'].nil? @Instances = [] params['Instances'].each do |i| prometheusinstancesoverview_tmp = PrometheusInstancesOverview.new prometheusinstancesoverview_tmp.deserialize(i) @Instances << prometheusinstancesoverview_tmp end end @Total = params['Total'] @RequestId = params['RequestId'] end end # DescribePrometheusInstances请求参数结构体 class DescribePrometheusInstancesRequest < TencentCloud::Common::AbstractModel # @param InstanceIds: 按照一个或者多个实例ID查询。实例ID形如:prom-xxxxxxxx。请求的实例的上限为100。 # @type InstanceIds: Array # @param InstanceStatus: 按照【实例状态】进行过滤。 # # @type InstanceStatus: Array # @param InstanceName: 按照【实例名称】进行过滤。 # @type InstanceName: String # @param Zones: 按照【可用区】进行过滤。可用区形如:ap-guangzhou-1。 # @type Zones: Array # @param TagFilters: 按照【标签键值对】进行过滤。tag-key使用具体的标签键进行替换。 # @type TagFilters: Array # @param IPv4Address: 按照【实例的IPv4地址】进行过滤。 # @type IPv4Address: Array # @param Limit: 返回数量,默认为20,最大值为100。 # @type Limit: Integer # @param Offset: 偏移量,默认为0。 # @type Offset: Integer # @param InstanceChargeType: 按照【计费类型】进行过滤。 #
  • 2:包年包月
  • #
  • 3:按量
  • # @type InstanceChargeType: Integer attr_accessor :InstanceIds, :InstanceStatus, :InstanceName, :Zones, :TagFilters, :IPv4Address, :Limit, :Offset, :InstanceChargeType def initialize(instanceids=nil, instancestatus=nil, instancename=nil, zones=nil, tagfilters=nil, ipv4address=nil, limit=nil, offset=nil, instancechargetype=nil) @InstanceIds = instanceids @InstanceStatus = instancestatus @InstanceName = instancename @Zones = zones @TagFilters = tagfilters @IPv4Address = ipv4address @Limit = limit @Offset = offset @InstanceChargeType = instancechargetype end def deserialize(params) @InstanceIds = params['InstanceIds'] @InstanceStatus = params['InstanceStatus'] @InstanceName = params['InstanceName'] @Zones = params['Zones'] unless params['TagFilters'].nil? @TagFilters = [] params['TagFilters'].each do |i| prometheustag_tmp = PrometheusTag.new prometheustag_tmp.deserialize(i) @TagFilters << prometheustag_tmp end end @IPv4Address = params['IPv4Address'] @Limit = params['Limit'] @Offset = params['Offset'] @InstanceChargeType = params['InstanceChargeType'] end end # DescribePrometheusInstances返回参数结构体 class DescribePrometheusInstancesResponse < TencentCloud::Common::AbstractModel # @param InstanceSet: 实例详细信息列表。 # 注意:此字段可能返回 null,表示取不到有效值。 # @type InstanceSet: Array # @param TotalCount: 符合条件的实例数量。 # @type TotalCount: Integer # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :InstanceSet, :TotalCount, :RequestId def initialize(instanceset=nil, totalcount=nil, requestid=nil) @InstanceSet = instanceset @TotalCount = totalcount @RequestId = requestid end def deserialize(params) unless params['InstanceSet'].nil? @InstanceSet = [] params['InstanceSet'].each do |i| prometheusinstancesitem_tmp = PrometheusInstancesItem.new prometheusinstancesitem_tmp.deserialize(i) @InstanceSet << prometheusinstancesitem_tmp end end @TotalCount = params['TotalCount'] @RequestId = params['RequestId'] end end # DescribePrometheusRecordRules请求参数结构体 class DescribePrometheusRecordRulesRequest < TencentCloud::Common::AbstractModel # @param InstanceId: Prometheus 实例 ID # @type InstanceId: String # @param Offset: 偏移量,默认为0。 # @type Offset: Integer # @param Limit: 返回数量,默认为20,最大值为100。 # @type Limit: Integer # @param Filters: 仅支持按Name, Values字段过滤。 # @type Filters: Array attr_accessor :InstanceId, :Offset, :Limit, :Filters def initialize(instanceid=nil, offset=nil, limit=nil, filters=nil) @InstanceId = instanceid @Offset = offset @Limit = limit @Filters = filters end def deserialize(params) @InstanceId = params['InstanceId'] @Offset = params['Offset'] @Limit = params['Limit'] unless params['Filters'].nil? @Filters = [] params['Filters'].each do |i| filter_tmp = Filter.new filter_tmp.deserialize(i) @Filters << filter_tmp end end end end # DescribePrometheusRecordRules返回参数结构体 class DescribePrometheusRecordRulesResponse < TencentCloud::Common::AbstractModel # @param Records: 聚合规则 # @type Records: Array # @param Total: 总数 # @type Total: Integer # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Records, :Total, :RequestId def initialize(records=nil, total=nil, requestid=nil) @Records = records @Total = total @RequestId = requestid end def deserialize(params) unless params['Records'].nil? @Records = [] params['Records'].each do |i| prometheusrecordruleyamlitem_tmp = PrometheusRecordRuleYamlItem.new prometheusrecordruleyamlitem_tmp.deserialize(i) @Records << prometheusrecordruleyamlitem_tmp end end @Total = params['Total'] @RequestId = params['RequestId'] end end # DescribePrometheusRegions请求参数结构体 class DescribePrometheusRegionsRequest < TencentCloud::Common::AbstractModel # @param PayMode: 1-预付费,2-后付费,3-全地域(不填默认全地域) # @type PayMode: Integer attr_accessor :PayMode def initialize(paymode=nil) @PayMode = paymode end def deserialize(params) @PayMode = params['PayMode'] end end # DescribePrometheusRegions返回参数结构体 class DescribePrometheusRegionsResponse < TencentCloud::Common::AbstractModel # @param RegionSet: 区域列表 # @type RegionSet: Array # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RegionSet, :RequestId def initialize(regionset=nil, requestid=nil) @RegionSet = regionset @RequestId = requestid end def deserialize(params) unless params['RegionSet'].nil? @RegionSet = [] params['RegionSet'].each do |i| prometheusregionitem_tmp = PrometheusRegionItem.new prometheusregionitem_tmp.deserialize(i) @RegionSet << prometheusregionitem_tmp end end @RequestId = params['RequestId'] end end # DescribePrometheusScrapeJobs请求参数结构体 class DescribePrometheusScrapeJobsRequest < TencentCloud::Common::AbstractModel # @param InstanceId: 实例 ID # @type InstanceId: String # @param AgentId: Agent ID # @type AgentId: String # @param Name: 任务名 # @type Name: String # @param JobIds: 任务 ID 列表 # @type JobIds: Array # @param Offset: 偏移量,默认为0 # @type Offset: Integer # @param Limit: 返回数量,默认为20,最大值为100 # @type Limit: Integer attr_accessor :InstanceId, :AgentId, :Name, :JobIds, :Offset, :Limit def initialize(instanceid=nil, agentid=nil, name=nil, jobids=nil, offset=nil, limit=nil) @InstanceId = instanceid @AgentId = agentid @Name = name @JobIds = jobids @Offset = offset @Limit = limit end def deserialize(params) @InstanceId = params['InstanceId'] @AgentId = params['AgentId'] @Name = params['Name'] @JobIds = params['JobIds'] @Offset = params['Offset'] @Limit = params['Limit'] end end # DescribePrometheusScrapeJobs返回参数结构体 class DescribePrometheusScrapeJobsResponse < TencentCloud::Common::AbstractModel # @param ScrapeJobSet: 任务列表 # 注意:此字段可能返回 null,表示取不到有效值。 # @type ScrapeJobSet: Array # @param TotalCount: 任务总量 # @type TotalCount: Integer # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :ScrapeJobSet, :TotalCount, :RequestId def initialize(scrapejobset=nil, totalcount=nil, requestid=nil) @ScrapeJobSet = scrapejobset @TotalCount = totalcount @RequestId = requestid end def deserialize(params) unless params['ScrapeJobSet'].nil? @ScrapeJobSet = [] params['ScrapeJobSet'].each do |i| prometheusscrapejob_tmp = PrometheusScrapeJob.new prometheusscrapejob_tmp.deserialize(i) @ScrapeJobSet << prometheusscrapejob_tmp end end @TotalCount = params['TotalCount'] @RequestId = params['RequestId'] end end # DescribePrometheusTargetsTMP请求参数结构体 class DescribePrometheusTargetsTMPRequest < TencentCloud::Common::AbstractModel # @param InstanceId: 实例id # @type InstanceId: String # @param ClusterId: 集成容器服务填绑定的集群id; # 集成中心填 non-cluster # @type ClusterId: String # @param ClusterType: 集群类型(可不填) # @type ClusterType: String # @param Filters: 过滤条件,支持Name=ServiceMonitor/PodMonitor/Probe/RawJob/Job, Value为采集配置名称;Name=Health, Value=up, down, unknown;Name=EndPoint, Value为EndPoint地址 # @type Filters: Array # @param Offset: targets分页偏移量,默认为0 # @type Offset: Integer # @param Limit: targets返回数量,默认为20,最大值200 # @type Limit: Integer attr_accessor :InstanceId, :ClusterId, :ClusterType, :Filters, :Offset, :Limit def initialize(instanceid=nil, clusterid=nil, clustertype=nil, filters=nil, offset=nil, limit=nil) @InstanceId = instanceid @ClusterId = clusterid @ClusterType = clustertype @Filters = filters @Offset = offset @Limit = limit end def deserialize(params) @InstanceId = params['InstanceId'] @ClusterId = params['ClusterId'] @ClusterType = params['ClusterType'] unless params['Filters'].nil? @Filters = [] params['Filters'].each do |i| filter_tmp = Filter.new filter_tmp.deserialize(i) @Filters << filter_tmp end end @Offset = params['Offset'] @Limit = params['Limit'] end end # DescribePrometheusTargetsTMP返回参数结构体 class DescribePrometheusTargetsTMPResponse < TencentCloud::Common::AbstractModel # @param Jobs: 所有Job的targets信息 # @type Jobs: Array # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Jobs, :RequestId def initialize(jobs=nil, requestid=nil) @Jobs = jobs @RequestId = requestid end def deserialize(params) unless params['Jobs'].nil? @Jobs = [] params['Jobs'].each do |i| prometheusjobtargets_tmp = PrometheusJobTargets.new prometheusjobtargets_tmp.deserialize(i) @Jobs << prometheusjobtargets_tmp end end @RequestId = params['RequestId'] end end # DescribePrometheusTemp请求参数结构体 class DescribePrometheusTempRequest < TencentCloud::Common::AbstractModel # @param Filters: 仅支持按Name, Values字段过滤: # * Name = Name # 按照给定的模板名称列表匹配 # * Name = ID # 按照给定的模板ID列表匹配 # * Name = Describe # 按照给定的模板描述列表匹配 # * Name = Level # 按照给定的模板维度(instance, cluster)列表匹配 # @type Filters: Array # @param Offset: 分页偏移量,默认为0 # @type Offset: Integer # @param Limit: 分页返回数量,默认为20,最大值为100 # @type Limit: Integer attr_accessor :Filters, :Offset, :Limit def initialize(filters=nil, offset=nil, limit=nil) @Filters = filters @Offset = offset @Limit = limit end def deserialize(params) unless params['Filters'].nil? @Filters = [] params['Filters'].each do |i| filter_tmp = Filter.new filter_tmp.deserialize(i) @Filters << filter_tmp end end @Offset = params['Offset'] @Limit = params['Limit'] end end # DescribePrometheusTemp返回参数结构体 class DescribePrometheusTempResponse < TencentCloud::Common::AbstractModel # @param Templates: 模板列表 # @type Templates: Array # @param Total: 总数 # @type Total: Integer # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Templates, :Total, :RequestId def initialize(templates=nil, total=nil, requestid=nil) @Templates = templates @Total = total @RequestId = requestid end def deserialize(params) unless params['Templates'].nil? @Templates = [] params['Templates'].each do |i| prometheustemp_tmp = PrometheusTemp.new prometheustemp_tmp.deserialize(i) @Templates << prometheustemp_tmp end end @Total = params['Total'] @RequestId = params['RequestId'] end end # DescribePrometheusTempSync请求参数结构体 class DescribePrometheusTempSyncRequest < TencentCloud::Common::AbstractModel # @param TemplateId: 模板ID # @type TemplateId: String attr_accessor :TemplateId def initialize(templateid=nil) @TemplateId = templateid end def deserialize(params) @TemplateId = params['TemplateId'] end end # DescribePrometheusTempSync返回参数结构体 class DescribePrometheusTempSyncResponse < TencentCloud::Common::AbstractModel # @param Targets: 同步目标详情 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Targets: Array # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Targets, :RequestId def initialize(targets=nil, requestid=nil) @Targets = targets @RequestId = requestid end def deserialize(params) unless params['Targets'].nil? @Targets = [] params['Targets'].each do |i| prometheustemplatesynctarget_tmp = PrometheusTemplateSyncTarget.new prometheustemplatesynctarget_tmp.deserialize(i) @Targets << prometheustemplatesynctarget_tmp end end @RequestId = params['RequestId'] end end # DescribePrometheusZones请求参数结构体 class DescribePrometheusZonesRequest < TencentCloud::Common::AbstractModel # @param RegionId: 地域 ID(RegionId 和 RegionName 只需要填一个) # @type RegionId: Integer # @param RegionName: 地域名(RegionId 和 RegionName 只需要填一个) # @type RegionName: String attr_accessor :RegionId, :RegionName def initialize(regionid=nil, regionname=nil) @RegionId = regionid @RegionName = regionname end def deserialize(params) @RegionId = params['RegionId'] @RegionName = params['RegionName'] end end # DescribePrometheusZones返回参数结构体 class DescribePrometheusZonesResponse < TencentCloud::Common::AbstractModel # @param ZoneSet: 区域列表 # 注意:此字段可能返回 null,表示取不到有效值。 # @type ZoneSet: Array # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :ZoneSet, :RequestId def initialize(zoneset=nil, requestid=nil) @ZoneSet = zoneset @RequestId = requestid end def deserialize(params) unless params['ZoneSet'].nil? @ZoneSet = [] params['ZoneSet'].each do |i| prometheuszoneitem_tmp = PrometheusZoneItem.new prometheuszoneitem_tmp.deserialize(i) @ZoneSet << prometheuszoneitem_tmp end end @RequestId = params['RequestId'] end end # DescribeRecordingRules请求参数结构体 class DescribeRecordingRulesRequest < TencentCloud::Common::AbstractModel # @param InstanceId: Prometheus 实例 ID # @type InstanceId: String # @param Limit: 返回数量,默认为 20,最大值为 100 # @type Limit: Integer # @param Offset: 偏移量,默认为 0 # @type Offset: Integer # @param RuleId: 规则 ID # @type RuleId: String # @param RuleState: 规则状态码,取值如下: #
  • 1=RuleDeleted
  • #
  • 2=RuleEnabled
  • #
  • 3=RuleDisabled
  • # @type RuleState: Integer # @param Name: 规则名称 # @type Name: String attr_accessor :InstanceId, :Limit, :Offset, :RuleId, :RuleState, :Name def initialize(instanceid=nil, limit=nil, offset=nil, ruleid=nil, rulestate=nil, name=nil) @InstanceId = instanceid @Limit = limit @Offset = offset @RuleId = ruleid @RuleState = rulestate @Name = name end def deserialize(params) @InstanceId = params['InstanceId'] @Limit = params['Limit'] @Offset = params['Offset'] @RuleId = params['RuleId'] @RuleState = params['RuleState'] @Name = params['Name'] end end # DescribeRecordingRules返回参数结构体 class DescribeRecordingRulesResponse < TencentCloud::Common::AbstractModel # @param TotalCount: 规则组数量 # @type TotalCount: Integer # @param RecordingRuleSet: 规则组详情 # 注意:此字段可能返回 null,表示取不到有效值。 # @type RecordingRuleSet: Array # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :TotalCount, :RecordingRuleSet, :RequestId def initialize(totalcount=nil, recordingruleset=nil, requestid=nil) @TotalCount = totalcount @RecordingRuleSet = recordingruleset @RequestId = requestid end def deserialize(params) @TotalCount = params['TotalCount'] unless params['RecordingRuleSet'].nil? @RecordingRuleSet = [] params['RecordingRuleSet'].each do |i| recordingruleset_tmp = RecordingRuleSet.new recordingruleset_tmp.deserialize(i) @RecordingRuleSet << recordingruleset_tmp end end @RequestId = params['RequestId'] end end # DescribeSSOAccount请求参数结构体 class DescribeSSOAccountRequest < TencentCloud::Common::AbstractModel # @param InstanceId: Grafana 实例 ID,例如:grafana-abcdefgh # @type InstanceId: String # @param UserId: 填写对应的账号 ID,将会按账号 ID 进行过滤,例如:10000 # @type UserId: String attr_accessor :InstanceId, :UserId def initialize(instanceid=nil, userid=nil) @InstanceId = instanceid @UserId = userid end def deserialize(params) @InstanceId = params['InstanceId'] @UserId = params['UserId'] end end # DescribeSSOAccount返回参数结构体 class DescribeSSOAccountResponse < TencentCloud::Common::AbstractModel # @param AccountSet: 授权账号列表 # 注意:此字段可能返回 null,表示取不到有效值。 # @type AccountSet: Array # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :AccountSet, :RequestId def initialize(accountset=nil, requestid=nil) @AccountSet = accountset @RequestId = requestid end def deserialize(params) unless params['AccountSet'].nil? @AccountSet = [] params['AccountSet'].each do |i| grafanaaccountinfo_tmp = GrafanaAccountInfo.new grafanaaccountinfo_tmp.deserialize(i) @AccountSet << grafanaaccountinfo_tmp end end @RequestId = params['RequestId'] end end # DescribeServiceDiscovery请求参数结构体 class DescribeServiceDiscoveryRequest < TencentCloud::Common::AbstractModel # @param InstanceId: Prometheus 实例 ID # @type InstanceId: String # @param KubeClusterId:
  • 类型是 TKE,为对应的腾讯云容器服务集群 ID
  • # @type KubeClusterId: String # @param KubeType: 用户 Kubernetes 集群类型: #
  • 1 = 容器服务集群(TKE)
  • # @type KubeType: Integer attr_accessor :InstanceId, :KubeClusterId, :KubeType def initialize(instanceid=nil, kubeclusterid=nil, kubetype=nil) @InstanceId = instanceid @KubeClusterId = kubeclusterid @KubeType = kubetype end def deserialize(params) @InstanceId = params['InstanceId'] @KubeClusterId = params['KubeClusterId'] @KubeType = params['KubeType'] end end # DescribeServiceDiscovery返回参数结构体 class DescribeServiceDiscoveryResponse < TencentCloud::Common::AbstractModel # @param ServiceDiscoverySet: 返回服务发现列表信息 # 注意:此字段可能返回 null,表示取不到有效值。 # @type ServiceDiscoverySet: Array # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :ServiceDiscoverySet, :RequestId def initialize(servicediscoveryset=nil, requestid=nil) @ServiceDiscoverySet = servicediscoveryset @RequestId = requestid end def deserialize(params) unless params['ServiceDiscoverySet'].nil? @ServiceDiscoverySet = [] params['ServiceDiscoverySet'].each do |i| servicediscoveryitem_tmp = ServiceDiscoveryItem.new servicediscoveryitem_tmp.deserialize(i) @ServiceDiscoverySet << servicediscoveryitem_tmp end end @RequestId = params['RequestId'] end end # DescribeStatisticData请求参数结构体 class DescribeStatisticDataRequest < TencentCloud::Common::AbstractModel # @param Module: 所属模块,固定值,为monitor # @type Module: String # @param Namespace: 命名空间,目前支持QCE/TKE2(Conditions必填),QCE/KEEWIDB,QCE/CAMP # @type Namespace: String # @param MetricNames: 指标名列表,相关指标信息可参考对应 [云产品指标文档](https://cloud.tencent.com/document/product/248/62458) # @type MetricNames: Array # @param Conditions: 维度条件,操作符支持=、in,详情请参考对应 [指标维度信息](https://cloud.tencent.com/document/product/248/53821) # @type Conditions: Array # @param Period: 统计粒度。默认取值为300,单位为s;可选的值为60、300、3600、86400 # 受存储时长限制,统计粒度与统计的时间范围有关: # 60s:EndTime-StartTime<12小时,且StartTime距当前时间不能超过15天; # 300s:EndTime-StartTime<3天,且StartTime距当前时间不能超过31天; # 3600s:EndTime-StartTime<30天,且StartTime距当前时间不能超过93天; # 86400s:EndTime-StartTime<186天,且StartTime距当前时间不能超过186天。 # @type Period: Integer # @param StartTime: 起始时间,默认为当前时间,如2020-12-08T19:51:23+08:00 # @type StartTime: String # @param EndTime: 结束时间,默认为当前时间,如2020-12-08T19:51:23+08:00 # @type EndTime: String # @param GroupBys: 按指定维度groupBy # @type GroupBys: Array attr_accessor :Module, :Namespace, :MetricNames, :Conditions, :Period, :StartTime, :EndTime, :GroupBys def initialize(_module=nil, namespace=nil, metricnames=nil, conditions=nil, period=nil, starttime=nil, endtime=nil, groupbys=nil) @Module = _module @Namespace = namespace @MetricNames = metricnames @Conditions = conditions @Period = period @StartTime = starttime @EndTime = endtime @GroupBys = groupbys end def deserialize(params) @Module = params['Module'] @Namespace = params['Namespace'] @MetricNames = params['MetricNames'] unless params['Conditions'].nil? @Conditions = [] params['Conditions'].each do |i| midquerycondition_tmp = MidQueryCondition.new midquerycondition_tmp.deserialize(i) @Conditions << midquerycondition_tmp end end @Period = params['Period'] @StartTime = params['StartTime'] @EndTime = params['EndTime'] @GroupBys = params['GroupBys'] end end # DescribeStatisticData返回参数结构体 class DescribeStatisticDataResponse < TencentCloud::Common::AbstractModel # @param Period: 统计周期 # @type Period: Integer # @param StartTime: 开始时间 # @type StartTime: String # @param EndTime: 结束时间 # @type EndTime: String # @param Data: 监控数据 # @type Data: Array # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Period, :StartTime, :EndTime, :Data, :RequestId def initialize(period=nil, starttime=nil, endtime=nil, data=nil, requestid=nil) @Period = period @StartTime = starttime @EndTime = endtime @Data = data @RequestId = requestid end def deserialize(params) @Period = params['Period'] @StartTime = params['StartTime'] @EndTime = params['EndTime'] unless params['Data'].nil? @Data = [] params['Data'].each do |i| metricdata_tmp = MetricData.new metricdata_tmp.deserialize(i) @Data << metricdata_tmp end end @RequestId = params['RequestId'] end end # DestroyPrometheusInstance请求参数结构体 class DestroyPrometheusInstanceRequest < TencentCloud::Common::AbstractModel # @param InstanceId: 实例 ID,该实例必须先被 terminate # @type InstanceId: String attr_accessor :InstanceId def initialize(instanceid=nil) @InstanceId = instanceid end def deserialize(params) @InstanceId = params['InstanceId'] end end # DestroyPrometheusInstance返回参数结构体 class DestroyPrometheusInstanceResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # 实例对象的维度组合 class Dimension < TencentCloud::Common::AbstractModel # @param Name: 实例维度名称 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Name: String # @param Value: 实例维度值 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Value: String attr_accessor :Name, :Value def initialize(name=nil, value=nil) @Name = name @Value = value end def deserialize(params) @Name = params['Name'] @Value = params['Value'] end end # 策略类型的维度信息 class DimensionNew < TencentCloud::Common::AbstractModel # @param Key: 维度 key 标示,后台英文名 # @type Key: String # @param Name: 维度 key 名称,中英文前台展示名 # @type Name: String # @param IsRequired: 是否必选 # @type IsRequired: Boolean # @param Operators: 支持的操作符列表 # @type Operators: Array # @param IsMultiple: 是否支持多选 # @type IsMultiple: Boolean # @param IsMutable: 创建后是否可以修改 # @type IsMutable: Boolean # @param IsVisible: 是否展示给用户 # @type IsVisible: Boolean # @param CanFilterPolicy: 能否用来过滤策略列表 # @type CanFilterPolicy: Boolean # @param CanFilterHistory: 能否用来过滤告警历史 # @type CanFilterHistory: Boolean # @param CanGroupBy: 能否作为聚合维度 # @type CanGroupBy: Boolean # @param MustGroupBy: 是否必须作为聚合维度 # @type MustGroupBy: Boolean # @param ShowValueReplace: 前端翻译要替换的 key # 注意:此字段可能返回 null,表示取不到有效值。 # @type ShowValueReplace: String attr_accessor :Key, :Name, :IsRequired, :Operators, :IsMultiple, :IsMutable, :IsVisible, :CanFilterPolicy, :CanFilterHistory, :CanGroupBy, :MustGroupBy, :ShowValueReplace def initialize(key=nil, name=nil, isrequired=nil, operators=nil, ismultiple=nil, ismutable=nil, isvisible=nil, canfilterpolicy=nil, canfilterhistory=nil, cangroupby=nil, mustgroupby=nil, showvaluereplace=nil) @Key = key @Name = name @IsRequired = isrequired @Operators = operators @IsMultiple = ismultiple @IsMutable = ismutable @IsVisible = isvisible @CanFilterPolicy = canfilterpolicy @CanFilterHistory = canfilterhistory @CanGroupBy = cangroupby @MustGroupBy = mustgroupby @ShowValueReplace = showvaluereplace end def deserialize(params) @Key = params['Key'] @Name = params['Name'] @IsRequired = params['IsRequired'] unless params['Operators'].nil? @Operators = [] params['Operators'].each do |i| operator_tmp = Operator.new operator_tmp.deserialize(i) @Operators << operator_tmp end end @IsMultiple = params['IsMultiple'] @IsMutable = params['IsMutable'] @IsVisible = params['IsVisible'] @CanFilterPolicy = params['CanFilterPolicy'] @CanFilterHistory = params['CanFilterHistory'] @CanGroupBy = params['CanGroupBy'] @MustGroupBy = params['MustGroupBy'] @ShowValueReplace = params['ShowValueReplace'] end end # 维度信息 class DimensionsDesc < TencentCloud::Common::AbstractModel # @param Dimensions: 维度名数组 # @type Dimensions: Array attr_accessor :Dimensions def initialize(dimensions=nil) @Dimensions = dimensions end def deserialize(params) @Dimensions = params['Dimensions'] end end # EnableGrafanaInternet请求参数结构体 class EnableGrafanaInternetRequest < TencentCloud::Common::AbstractModel # @param InstanceID: Grafana 实例 ID,例如:grafana-kleu3gt0 # @type InstanceID: String # @param EnableInternet: 开启或关闭公网访问,true为开启,false 为不开启 # @type EnableInternet: Boolean attr_accessor :InstanceID, :EnableInternet def initialize(instanceid=nil, enableinternet=nil) @InstanceID = instanceid @EnableInternet = enableinternet end def deserialize(params) @InstanceID = params['InstanceID'] @EnableInternet = params['EnableInternet'] end end # EnableGrafanaInternet返回参数结构体 class EnableGrafanaInternetResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # EnableGrafanaSSO请求参数结构体 class EnableGrafanaSSORequest < TencentCloud::Common::AbstractModel # @param EnableSSO: 是否开启 SSO,true为开启,false 为不开启 # @type EnableSSO: Boolean # @param InstanceId: Grafana 实例 ID,例如:grafana-abcdefgh # @type InstanceId: String attr_accessor :EnableSSO, :InstanceId def initialize(enablesso=nil, instanceid=nil) @EnableSSO = enablesso @InstanceId = instanceid end def deserialize(params) @EnableSSO = params['EnableSSO'] @InstanceId = params['InstanceId'] end end # EnableGrafanaSSO返回参数结构体 class EnableGrafanaSSOResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # EnableSSOCamCheck请求参数结构体 class EnableSSOCamCheckRequest < TencentCloud::Common::AbstractModel # @param InstanceId: Grafana 实例 ID,例如:grafana-abcdefgh # @type InstanceId: String # @param EnableSSOCamCheck: 是否开启 cam 鉴权,true为开启,false 为不开启 # @type EnableSSOCamCheck: Boolean attr_accessor :InstanceId, :EnableSSOCamCheck def initialize(instanceid=nil, enablessocamcheck=nil) @InstanceId = instanceid @EnableSSOCamCheck = enablessocamcheck end def deserialize(params) @InstanceId = params['InstanceId'] @EnableSSOCamCheck = params['EnableSSOCamCheck'] end end # EnableSSOCamCheck返回参数结构体 class EnableSSOCamCheckResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # 事件告警条件 class EventCondition < TencentCloud::Common::AbstractModel # @param AlarmNotifyPeriod: 告警通知频率 # 注意:此字段可能返回 null,表示取不到有效值。 # @type AlarmNotifyPeriod: String # @param AlarmNotifyType: 重复通知策略预定义(0 - 只告警一次, 1 - 指数告警,2 - 连接告警) # 注意:此字段可能返回 null,表示取不到有效值。 # @type AlarmNotifyType: String # @param EventID: 事件ID # @type EventID: String # @param EventDisplayName: 事件展示名称(对外) # @type EventDisplayName: String # @param RuleID: 规则ID # @type RuleID: String # @param MetricName: 指标名 # 注意:此字段可能返回 null,表示取不到有效值。 # @type MetricName: String attr_accessor :AlarmNotifyPeriod, :AlarmNotifyType, :EventID, :EventDisplayName, :RuleID, :MetricName def initialize(alarmnotifyperiod=nil, alarmnotifytype=nil, eventid=nil, eventdisplayname=nil, ruleid=nil, metricname=nil) @AlarmNotifyPeriod = alarmnotifyperiod @AlarmNotifyType = alarmnotifytype @EventID = eventid @EventDisplayName = eventdisplayname @RuleID = ruleid @MetricName = metricname end def deserialize(params) @AlarmNotifyPeriod = params['AlarmNotifyPeriod'] @AlarmNotifyType = params['AlarmNotifyType'] @EventID = params['EventID'] @EventDisplayName = params['EventDisplayName'] @RuleID = params['RuleID'] @MetricName = params['MetricName'] end end # 查询过滤参数 class Filter < TencentCloud::Common::AbstractModel # @param Type: 过滤方式(=, !=, in) # @type Type: String # @param Key: 过滤维度名 # @type Key: String # @param Value: 过滤值,in过滤方式用逗号分割多个值 # @type Value: String # @param Name: 过滤条件名称 # @type Name: String # @param Values: 过滤条件取值范围 # @type Values: Array attr_accessor :Type, :Key, :Value, :Name, :Values def initialize(type=nil, key=nil, value=nil, name=nil, values=nil) @Type = type @Key = key @Value = value @Name = name @Values = values end def deserialize(params) @Type = params['Type'] @Key = params['Key'] @Value = params['Value'] @Name = params['Name'] @Values = params['Values'] end end # GetMonitorData请求参数结构体 class GetMonitorDataRequest < TencentCloud::Common::AbstractModel # @param Namespace: 命名空间,如QCE/CVM。各个云产品的详细命名空间说明请参阅各个产品[监控指标](https://cloud.tencent.com/document/product/248/6140)文档 # @type Namespace: String # @param MetricName: 指标名称,如CPUUsage,仅支持单指标拉取。各个云产品的详细指标说明请参阅各个产品[监控指标](https://cloud.tencent.com/document/product/248/6140)文档,对应的指标英文名即为MetricName # @type MetricName: String # @param Instances: 实例对象的维度组合,格式为key-value键值对形式的集合。不同类型的实例字段完全不同,如CVM为[{"Name":"InstanceId","Value":"ins-j0hk02zo"}],Ckafka为[{"Name":"instanceId","Value":"ckafka-l49k54dd"}],COS为[{"Name":"appid","Value":"1258344699"},{"Name":"bucket","Value":"rig-1258344699"}]。各个云产品的维度请参阅各个产品[监控指标](https://cloud.tencent.com/document/product/248/6140)文档,对应的维度列即为维度组合的key,value为key对应的值。单请求最多支持批量拉取10个实例的监控数据。 # @type Instances: Array # @param Period: 监控统计周期,如60。默认为取值为300,单位为s。每个指标支持的统计周期不一定相同,各个云产品支持的统计周期请参阅各个产品[监控指标](https://cloud.tencent.com/document/product/248/6140)文档,对应的统计周期列即为支持的统计周期。单请求的数据点数限制为1440个。 # @type Period: Integer # @param StartTime: 起始时间,如2018-09-22T19:51:23+08:00 # @type StartTime: String # @param EndTime: 结束时间,如2018-09-22T20:51:23+08:00,默认为当前时间。 EndTime不能小于StartTime # @type EndTime: String # @param SpecifyStatistics: 返回多种统计方式数据。avg, max, min (1,2,4)可以自由组合 # @type SpecifyStatistics: Integer attr_accessor :Namespace, :MetricName, :Instances, :Period, :StartTime, :EndTime, :SpecifyStatistics def initialize(namespace=nil, metricname=nil, instances=nil, period=nil, starttime=nil, endtime=nil, specifystatistics=nil) @Namespace = namespace @MetricName = metricname @Instances = instances @Period = period @StartTime = starttime @EndTime = endtime @SpecifyStatistics = specifystatistics end def deserialize(params) @Namespace = params['Namespace'] @MetricName = params['MetricName'] unless params['Instances'].nil? @Instances = [] params['Instances'].each do |i| instance_tmp = Instance.new instance_tmp.deserialize(i) @Instances << instance_tmp end end @Period = params['Period'] @StartTime = params['StartTime'] @EndTime = params['EndTime'] @SpecifyStatistics = params['SpecifyStatistics'] end end # GetMonitorData返回参数结构体 class GetMonitorDataResponse < TencentCloud::Common::AbstractModel # @param Period: 统计周期 # @type Period: Integer # @param MetricName: 指标名 # @type MetricName: String # @param DataPoints: 数据点数组 # @type DataPoints: Array # @param StartTime: 开始时间 # @type StartTime: String # @param EndTime: 结束时间 # @type EndTime: String # @param Msg: 返回信息 # @type Msg: String # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Period, :MetricName, :DataPoints, :StartTime, :EndTime, :Msg, :RequestId def initialize(period=nil, metricname=nil, datapoints=nil, starttime=nil, endtime=nil, msg=nil, requestid=nil) @Period = period @MetricName = metricname @DataPoints = datapoints @StartTime = starttime @EndTime = endtime @Msg = msg @RequestId = requestid end def deserialize(params) @Period = params['Period'] @MetricName = params['MetricName'] unless params['DataPoints'].nil? @DataPoints = [] params['DataPoints'].each do |i| datapoint_tmp = DataPoint.new datapoint_tmp.deserialize(i) @DataPoints << datapoint_tmp end end @StartTime = params['StartTime'] @EndTime = params['EndTime'] @Msg = params['Msg'] @RequestId = params['RequestId'] end end # GetPrometheusAgentManagementCommand请求参数结构体 class GetPrometheusAgentManagementCommandRequest < TencentCloud::Common::AbstractModel # @param InstanceId: Prometheus 实例 ID # @type InstanceId: String # @param AgentId: Prometheus Agent ID # @type AgentId: String attr_accessor :InstanceId, :AgentId def initialize(instanceid=nil, agentid=nil) @InstanceId = instanceid @AgentId = agentid end def deserialize(params) @InstanceId = params['InstanceId'] @AgentId = params['AgentId'] end end # GetPrometheusAgentManagementCommand返回参数结构体 class GetPrometheusAgentManagementCommandResponse < TencentCloud::Common::AbstractModel # @param Command: Agent 管理命令 # @type Command: :class:`Tencentcloud::Monitor.v20180724.models.ManagementCommand` # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Command, :RequestId def initialize(command=nil, requestid=nil) @Command = command @RequestId = requestid end def deserialize(params) unless params['Command'].nil? @Command = ManagementCommand.new @Command.deserialize(params['Command']) end @RequestId = params['RequestId'] end end # Grafana可视化服务 授权账户信息 class GrafanaAccountInfo < TencentCloud::Common::AbstractModel # @param UserId: 用户账号ID # @type UserId: String # @param Role: 用户权限 # @type Role: Array # @param Notes: 备注 # @type Notes: String # @param CreateAt: 创建时间 # @type CreateAt: String # @param InstanceId: 实例 ID # 注意:此字段可能返回 null,表示取不到有效值。 # @type InstanceId: String # @param Uin: 用户主账号 UIN # @type Uin: String attr_accessor :UserId, :Role, :Notes, :CreateAt, :InstanceId, :Uin def initialize(userid=nil, role=nil, notes=nil, createat=nil, instanceid=nil, uin=nil) @UserId = userid @Role = role @Notes = notes @CreateAt = createat @InstanceId = instanceid @Uin = uin end def deserialize(params) @UserId = params['UserId'] unless params['Role'].nil? @Role = [] params['Role'].each do |i| grafanaaccountrole_tmp = GrafanaAccountRole.new grafanaaccountrole_tmp.deserialize(i) @Role << grafanaaccountrole_tmp end end @Notes = params['Notes'] @CreateAt = params['CreateAt'] @InstanceId = params['InstanceId'] @Uin = params['Uin'] end end # Grafana可视化服务 账号权限 class GrafanaAccountRole < TencentCloud::Common::AbstractModel # @param Organization: 组织 # @type Organization: String # @param Role: 权限(Admin、Editor、Viewer) # @type Role: String attr_accessor :Organization, :Role def initialize(organization=nil, role=nil) @Organization = organization @Role = role end def deserialize(params) @Organization = params['Organization'] @Role = params['Role'] end end # Grafana 告警渠道 class GrafanaChannel < TencentCloud::Common::AbstractModel # @param ChannelId: 渠道 ID # @type ChannelId: String # @param ChannelName: 渠道名 # @type ChannelName: String # @param Receivers: 告警通道模板 ID 数组 # @type Receivers: Array # @param CreatedAt: 创建时间 # @type CreatedAt: String # @param UpdatedAt: 更新时间 # @type UpdatedAt: String # @param OrganizationIds: 告警渠道的所有生效组织 # 注意:此字段可能返回 null,表示取不到有效值。 # @type OrganizationIds: Array attr_accessor :ChannelId, :ChannelName, :Receivers, :CreatedAt, :UpdatedAt, :OrganizationIds def initialize(channelid=nil, channelname=nil, receivers=nil, createdat=nil, updatedat=nil, organizationids=nil) @ChannelId = channelid @ChannelName = channelname @Receivers = receivers @CreatedAt = createdat @UpdatedAt = updatedat @OrganizationIds = organizationids end def deserialize(params) @ChannelId = params['ChannelId'] @ChannelName = params['ChannelName'] @Receivers = params['Receivers'] @CreatedAt = params['CreatedAt'] @UpdatedAt = params['UpdatedAt'] @OrganizationIds = params['OrganizationIds'] end end # 查询 Grafana 实例时的实例类型 class GrafanaInstanceInfo < TencentCloud::Common::AbstractModel # @param InstanceName: 实例名 # @type InstanceName: String # @param InstanceId: 实例 ID # @type InstanceId: String # @param Region: 地域 # @type Region: String # @param VpcId: VPC ID # @type VpcId: String # @param SubnetIds: 子网 ID 数组 # @type SubnetIds: Array # @param InternetUrl: Grafana 公网地址 # @type InternetUrl: String # @param InternalUrl: Grafana 内网地址 # @type InternalUrl: String # @param CreatedAt: 创建时间 # @type CreatedAt: String # @param InstanceStatus: 运行状态(1:正在创建;2:运行中;3:异常;4:重启中;5:停机中; 6:已停机; 7: 已删除) # @type InstanceStatus: Integer # @param TagSpecification: 实例的标签 # 注意:此字段可能返回 null,表示取不到有效值。 # @type TagSpecification: Array # @param Zone: 实例的可用区 # @type Zone: String # @param InstanceChargeType: 计费模式(1:包年包月) # @type InstanceChargeType: Integer # @param VpcName: VPC 名称 # @type VpcName: String # @param SubnetName: 子网名称 # @type SubnetName: String # @param RegionId: 地域 ID # @type RegionId: Integer # @param RootUrl: 可访问此实例的完整 URL # @type RootUrl: String # @param EnableSSO: 是否开启 SSO # @type EnableSSO: Boolean # @param Version: 版本号 # @type Version: String # @param EnableSSOCamCheck: SSO登录时是否开启cam鉴权 # @type EnableSSOCamCheck: Boolean attr_accessor :InstanceName, :InstanceId, :Region, :VpcId, :SubnetIds, :InternetUrl, :InternalUrl, :CreatedAt, :InstanceStatus, :TagSpecification, :Zone, :InstanceChargeType, :VpcName, :SubnetName, :RegionId, :RootUrl, :EnableSSO, :Version, :EnableSSOCamCheck def initialize(instancename=nil, instanceid=nil, region=nil, vpcid=nil, subnetids=nil, interneturl=nil, internalurl=nil, createdat=nil, instancestatus=nil, tagspecification=nil, zone=nil, instancechargetype=nil, vpcname=nil, subnetname=nil, regionid=nil, rooturl=nil, enablesso=nil, version=nil, enablessocamcheck=nil) @InstanceName = instancename @InstanceId = instanceid @Region = region @VpcId = vpcid @SubnetIds = subnetids @InternetUrl = interneturl @InternalUrl = internalurl @CreatedAt = createdat @InstanceStatus = instancestatus @TagSpecification = tagspecification @Zone = zone @InstanceChargeType = instancechargetype @VpcName = vpcname @SubnetName = subnetname @RegionId = regionid @RootUrl = rooturl @EnableSSO = enablesso @Version = version @EnableSSOCamCheck = enablessocamcheck end def deserialize(params) @InstanceName = params['InstanceName'] @InstanceId = params['InstanceId'] @Region = params['Region'] @VpcId = params['VpcId'] @SubnetIds = params['SubnetIds'] @InternetUrl = params['InternetUrl'] @InternalUrl = params['InternalUrl'] @CreatedAt = params['CreatedAt'] @InstanceStatus = params['InstanceStatus'] unless params['TagSpecification'].nil? @TagSpecification = [] params['TagSpecification'].each do |i| prometheustag_tmp = PrometheusTag.new prometheustag_tmp.deserialize(i) @TagSpecification << prometheustag_tmp end end @Zone = params['Zone'] @InstanceChargeType = params['InstanceChargeType'] @VpcName = params['VpcName'] @SubnetName = params['SubnetName'] @RegionId = params['RegionId'] @RootUrl = params['RootUrl'] @EnableSSO = params['EnableSSO'] @Version = params['Version'] @EnableSSOCamCheck = params['EnableSSOCamCheck'] end end # Grafana 集成实例配置 class GrafanaIntegrationConfig < TencentCloud::Common::AbstractModel # @param IntegrationId: 集成 ID # @type IntegrationId: String # @param Kind: 集成类型 # @type Kind: String # @param Content: 集成内容 # @type Content: String # @param Description: 集成描述 # @type Description: String # @param GrafanaURL: Grafana 跳转地址 # 注意:此字段可能返回 null,表示取不到有效值。 # @type GrafanaURL: String attr_accessor :IntegrationId, :Kind, :Content, :Description, :GrafanaURL def initialize(integrationid=nil, kind=nil, content=nil, description=nil, grafanaurl=nil) @IntegrationId = integrationid @Kind = kind @Content = content @Description = description @GrafanaURL = grafanaurl end def deserialize(params) @IntegrationId = params['IntegrationId'] @Kind = params['Kind'] @Content = params['Content'] @Description = params['Description'] @GrafanaURL = params['GrafanaURL'] end end # Grafana 告警渠道 class GrafanaNotificationChannel < TencentCloud::Common::AbstractModel # @param ChannelId: 渠道 ID # @type ChannelId: String # @param ChannelName: 渠道名 # @type ChannelName: String # @param Receivers: 告警通道模板 ID 数组 # @type Receivers: Array # @param CreatedAt: 创建时间 # @type CreatedAt: String # @param UpdatedAt: 更新时间 # @type UpdatedAt: String # @param OrgId: 默认生效组织,已废弃,请使用 OrganizationIds # @type OrgId: String # @param ExtraOrgIds: 额外生效组织,已废弃,请使用 OrganizationIds # 注意:此字段可能返回 null,表示取不到有效值。 # @type ExtraOrgIds: Array # @param OrgIds: 生效组织,已废弃,请使用 OrganizationIds # 注意:此字段可能返回 null,表示取不到有效值。 # @type OrgIds: Array # @param OrganizationIds: 告警渠道的所有生效组织 # 注意:此字段可能返回 null,表示取不到有效值。 # @type OrganizationIds: Array attr_accessor :ChannelId, :ChannelName, :Receivers, :CreatedAt, :UpdatedAt, :OrgId, :ExtraOrgIds, :OrgIds, :OrganizationIds def initialize(channelid=nil, channelname=nil, receivers=nil, createdat=nil, updatedat=nil, orgid=nil, extraorgids=nil, orgids=nil, organizationids=nil) @ChannelId = channelid @ChannelName = channelname @Receivers = receivers @CreatedAt = createdat @UpdatedAt = updatedat @OrgId = orgid @ExtraOrgIds = extraorgids @OrgIds = orgids @OrganizationIds = organizationids end def deserialize(params) @ChannelId = params['ChannelId'] @ChannelName = params['ChannelName'] @Receivers = params['Receivers'] @CreatedAt = params['CreatedAt'] @UpdatedAt = params['UpdatedAt'] @OrgId = params['OrgId'] @ExtraOrgIds = params['ExtraOrgIds'] @OrgIds = params['OrgIds'] @OrganizationIds = params['OrganizationIds'] end end # Grafana 插件 class GrafanaPlugin < TencentCloud::Common::AbstractModel # @param PluginId: Grafana 插件 ID # @type PluginId: String # @param Version: Grafana 插件版本 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Version: String attr_accessor :PluginId, :Version def initialize(pluginid=nil, version=nil) @PluginId = pluginid @Version = version end def deserialize(params) @PluginId = params['PluginId'] @Version = params['Version'] end end # InstallPlugins请求参数结构体 class InstallPluginsRequest < TencentCloud::Common::AbstractModel # @param Plugins: 插件信息(可通过 DescribePluginOverviews 接口获取) # @type Plugins: Array # @param InstanceId: Grafana 实例 ID,例如:grafana-abcdefgh # @type InstanceId: String attr_accessor :Plugins, :InstanceId def initialize(plugins=nil, instanceid=nil) @Plugins = plugins @InstanceId = instanceid end def deserialize(params) unless params['Plugins'].nil? @Plugins = [] params['Plugins'].each do |i| grafanaplugin_tmp = GrafanaPlugin.new grafanaplugin_tmp.deserialize(i) @Plugins << grafanaplugin_tmp end end @InstanceId = params['InstanceId'] end end # InstallPlugins返回参数结构体 class InstallPluginsResponse < TencentCloud::Common::AbstractModel # @param PluginIds: 已安装插件 ID # 注意:此字段可能返回 null,表示取不到有效值。 # @type PluginIds: Array # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :PluginIds, :RequestId def initialize(pluginids=nil, requestid=nil) @PluginIds = pluginids @RequestId = requestid end def deserialize(params) @PluginIds = params['PluginIds'] @RequestId = params['RequestId'] end end # 实例维度组合数组 class Instance < TencentCloud::Common::AbstractModel # @param Dimensions: 实例的维度组合 # @type Dimensions: Array attr_accessor :Dimensions def initialize(dimensions=nil) @Dimensions = dimensions end def deserialize(params) unless params['Dimensions'].nil? @Dimensions = [] params['Dimensions'].each do |i| dimension_tmp = Dimension.new dimension_tmp.deserialize(i) @Dimensions << dimension_tmp end end end end # DescribeBasicAlarmList返回的Alarms里的InstanceGroup class InstanceGroup < TencentCloud::Common::AbstractModel # @param InstanceGroupId: 实例组ID # 注意:此字段可能返回 null,表示取不到有效值。 # @type InstanceGroupId: Integer # @param InstanceGroupName: 实例组名 # 注意:此字段可能返回 null,表示取不到有效值。 # @type InstanceGroupName: String attr_accessor :InstanceGroupId, :InstanceGroupName def initialize(instancegroupid=nil, instancegroupname=nil) @InstanceGroupId = instancegroupid @InstanceGroupName = instancegroupname end def deserialize(params) @InstanceGroupId = params['InstanceGroupId'] @InstanceGroupName = params['InstanceGroupName'] end end # 告警对象所属实例组 class InstanceGroups < TencentCloud::Common::AbstractModel # @param Id: 实例组 Id # @type Id: Integer # @param Name: 实例组名称 # @type Name: String attr_accessor :Id, :Name def initialize(id=nil, name=nil) @Id = id @Name = name end def deserialize(params) @Id = params['Id'] @Name = params['Name'] end end # export 集成配置 class IntegrationConfiguration < TencentCloud::Common::AbstractModel # @param Name: 名字 # @type Name: String # @param Kind: 类型 # @type Kind: String # @param Content: 内容 # @type Content: String # @param Status: 状态 # @type Status: Integer # @param Category: 实例类型 # @type Category: String # @param InstanceDesc: 实例描述 # @type InstanceDesc: String # @param GrafanaDashboardURL: dashboard 的 URL # @type GrafanaDashboardURL: String attr_accessor :Name, :Kind, :Content, :Status, :Category, :InstanceDesc, :GrafanaDashboardURL def initialize(name=nil, kind=nil, content=nil, status=nil, category=nil, instancedesc=nil, grafanadashboardurl=nil) @Name = name @Kind = kind @Content = content @Status = status @Category = category @InstanceDesc = instancedesc @GrafanaDashboardURL = grafanadashboardurl end def deserialize(params) @Name = params['Name'] @Kind = params['Kind'] @Content = params['Content'] @Status = params['Status'] @Category = params['Category'] @InstanceDesc = params['InstanceDesc'] @GrafanaDashboardURL = params['GrafanaDashboardURL'] end end # k8s中标签,一般以数组的方式存在 class Label < TencentCloud::Common::AbstractModel # @param Name: map表中的Name # @type Name: String # @param Value: map表中的Value # @type Value: String attr_accessor :Name, :Value def initialize(name=nil, value=nil) @Name = name @Value = value end def deserialize(params) @Name = params['Name'] @Value = params['Value'] end end # 日志告警请求信息 class LogAlarmReq < TencentCloud::Common::AbstractModel # @param InstanceId: apm实例id # @type InstanceId: String # @param Filter: 检索条件信息 # @type Filter: Array # @param AlarmMerge: 告警合并开启/暂停 # @type AlarmMerge: String # @param AlarmMergeTime: 告警合并时间 # @type AlarmMergeTime: String attr_accessor :InstanceId, :Filter, :AlarmMerge, :AlarmMergeTime def initialize(instanceid=nil, filter=nil, alarmmerge=nil, alarmmergetime=nil) @InstanceId = instanceid @Filter = filter @AlarmMerge = alarmmerge @AlarmMergeTime = alarmmergetime end def deserialize(params) @InstanceId = params['InstanceId'] unless params['Filter'].nil? @Filter = [] params['Filter'].each do |i| logfilterinfo_tmp = LogFilterInfo.new logfilterinfo_tmp.deserialize(i) @Filter << logfilterinfo_tmp end end @AlarmMerge = params['AlarmMerge'] @AlarmMergeTime = params['AlarmMergeTime'] end end # 日志告警检索条件结构体 class LogFilterInfo < TencentCloud::Common::AbstractModel # @param Key: 字段名 # @type Key: String # @param Operator: 比较符号 # @type Operator: String # @param Value: 字段值 # @type Value: String attr_accessor :Key, :Operator, :Value def initialize(key=nil, operator=nil, value=nil) @Key = key @Operator = operator @Value = value end def deserialize(params) @Key = params['Key'] @Operator = params['Operator'] @Value = params['Value'] end end # Prometheus Agent 管理命令行 class ManagementCommand < TencentCloud::Common::AbstractModel # @param Install: Agent 安装命令 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Install: String # @param Restart: Agent 重启命令 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Restart: String # @param Stop: Agent 停止命令 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Stop: String # @param StatusCheck: Agent 状态检测命令 # 注意:此字段可能返回 null,表示取不到有效值。 # @type StatusCheck: String # @param LogCheck: Agent 日志检测命令 # 注意:此字段可能返回 null,表示取不到有效值。 # @type LogCheck: String attr_accessor :Install, :Restart, :Stop, :StatusCheck, :LogCheck def initialize(install=nil, restart=nil, stop=nil, statuscheck=nil, logcheck=nil) @Install = install @Restart = restart @Stop = stop @StatusCheck = statuscheck @LogCheck = logcheck end def deserialize(params) @Install = params['Install'] @Restart = params['Restart'] @Stop = params['Stop'] @StatusCheck = params['StatusCheck'] @LogCheck = params['LogCheck'] end end # 指标,可用于设置告警、查询数据 class Metric < TencentCloud::Common::AbstractModel # @param Namespace: 告警策略类型 # @type Namespace: String # @param MetricName: 指标名 # @type MetricName: String # @param Description: 指标展示名 # @type Description: String # @param Min: 最小值 # @type Min: Float # @param Max: 最大值 # @type Max: Float # @param Dimensions: 维度列表 # @type Dimensions: Array # @param Unit: 单位 # @type Unit: String # @param MetricConfig: 指标配置 # 注意:此字段可能返回 null,表示取不到有效值。 # @type MetricConfig: :class:`Tencentcloud::Monitor.v20180724.models.MetricConfig` # @param IsAdvanced: 是否为高级指标。1是 0否 # 注意:此字段可能返回 null,表示取不到有效值。 # @type IsAdvanced: Integer # @param IsOpen: 高级指标是否开通。1是 0否 # 注意:此字段可能返回 null,表示取不到有效值。 # @type IsOpen: Integer # @param ProductId: 集成中心产品ID # 注意:此字段可能返回 null,表示取不到有效值。 # @type ProductId: Integer # @param Operators: 匹配运算符 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Operators: Array # @param Periods: 指标触发 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Periods: Array # @param IsLatenessMetric: 是否延迟指标 # 注意:此字段可能返回 null,表示取不到有效值。 # @type IsLatenessMetric: Integer attr_accessor :Namespace, :MetricName, :Description, :Min, :Max, :Dimensions, :Unit, :MetricConfig, :IsAdvanced, :IsOpen, :ProductId, :Operators, :Periods, :IsLatenessMetric def initialize(namespace=nil, metricname=nil, description=nil, min=nil, max=nil, dimensions=nil, unit=nil, metricconfig=nil, isadvanced=nil, isopen=nil, productid=nil, operators=nil, periods=nil, islatenessmetric=nil) @Namespace = namespace @MetricName = metricname @Description = description @Min = min @Max = max @Dimensions = dimensions @Unit = unit @MetricConfig = metricconfig @IsAdvanced = isadvanced @IsOpen = isopen @ProductId = productid @Operators = operators @Periods = periods @IsLatenessMetric = islatenessmetric end def deserialize(params) @Namespace = params['Namespace'] @MetricName = params['MetricName'] @Description = params['Description'] @Min = params['Min'] @Max = params['Max'] @Dimensions = params['Dimensions'] @Unit = params['Unit'] unless params['MetricConfig'].nil? @MetricConfig = MetricConfig.new @MetricConfig.deserialize(params['MetricConfig']) end @IsAdvanced = params['IsAdvanced'] @IsOpen = params['IsOpen'] @ProductId = params['ProductId'] unless params['Operators'].nil? @Operators = [] params['Operators'].each do |i| operator_tmp = Operator.new operator_tmp.deserialize(i) @Operators << operator_tmp end end @Periods = params['Periods'] @IsLatenessMetric = params['IsLatenessMetric'] end end # 指标配置 class MetricConfig < TencentCloud::Common::AbstractModel # @param Operator: 允许使用的运算符 # @type Operator: Array # @param Period: 允许配置的数据周期,以秒为单位 # @type Period: Array # @param ContinuePeriod: 允许配置的持续周期个数 # @type ContinuePeriod: Array attr_accessor :Operator, :Period, :ContinuePeriod def initialize(operator=nil, period=nil, continueperiod=nil) @Operator = operator @Period = period @ContinuePeriod = continueperiod end def deserialize(params) @Operator = params['Operator'] @Period = params['Period'] @ContinuePeriod = params['ContinuePeriod'] end end # DescribeMetricData接口出参 class MetricData < TencentCloud::Common::AbstractModel # @param MetricName: 指标名 # @type MetricName: String # @param Points: 监控数据点 # @type Points: Array attr_accessor :MetricName, :Points def initialize(metricname=nil, points=nil) @MetricName = metricname @Points = points end def deserialize(params) @MetricName = params['MetricName'] unless params['Points'].nil? @Points = [] params['Points'].each do |i| metricdatapoint_tmp = MetricDataPoint.new metricdatapoint_tmp.deserialize(i) @Points << metricdatapoint_tmp end end end end # DescribeMetricData出参 class MetricDataPoint < TencentCloud::Common::AbstractModel # @param Dimensions: 实例对象维度组合 # @type Dimensions: Array # @param Values: 数据点列表 # @type Values: Array attr_accessor :Dimensions, :Values def initialize(dimensions=nil, values=nil) @Dimensions = dimensions @Values = values end def deserialize(params) unless params['Dimensions'].nil? @Dimensions = [] params['Dimensions'].each do |i| dimension_tmp = Dimension.new dimension_tmp.deserialize(i) @Dimensions << dimension_tmp end end unless params['Values'].nil? @Values = [] params['Values'].each do |i| point_tmp = Point.new point_tmp.deserialize(i) @Values << point_tmp end end end end # 指标数据的解释 class MetricObjectMeaning < TencentCloud::Common::AbstractModel # @param En: 指标英文解释 # @type En: String # @param Zh: 指标中文解释 # @type Zh: String attr_accessor :En, :Zh def initialize(en=nil, zh=nil) @En = en @Zh = zh end def deserialize(params) @En = params['En'] @Zh = params['Zh'] end end # 对业务指标的单位及支持统计周期的描述 class MetricSet < TencentCloud::Common::AbstractModel # @param Namespace: 命名空间,每个云产品会有一个命名空间 # @type Namespace: String # @param MetricName: 指标名称 # @type MetricName: String # @param Unit: 指标使用的单位 # @type Unit: String # @param UnitCname: 指标使用的单位 # @type UnitCname: String # @param Period: 指标支持的统计周期,单位是秒,如60、300 # @type Period: Array # @param Periods: 统计周期内指标方式 # @type Periods: Array # @param Meaning: 统计指标含义解释 # @type Meaning: :class:`Tencentcloud::Monitor.v20180724.models.MetricObjectMeaning` # @param Dimensions: 维度描述信息 # @type Dimensions: Array # @param MetricCName: 指标中文名 # 注意:此字段可能返回 null,表示取不到有效值。 # @type MetricCName: String # @param MetricEName: 指标英文名 # 注意:此字段可能返回 null,表示取不到有效值。 # @type MetricEName: String attr_accessor :Namespace, :MetricName, :Unit, :UnitCname, :Period, :Periods, :Meaning, :Dimensions, :MetricCName, :MetricEName def initialize(namespace=nil, metricname=nil, unit=nil, unitcname=nil, period=nil, periods=nil, meaning=nil, dimensions=nil, metriccname=nil, metricename=nil) @Namespace = namespace @MetricName = metricname @Unit = unit @UnitCname = unitcname @Period = period @Periods = periods @Meaning = meaning @Dimensions = dimensions @MetricCName = metriccname @MetricEName = metricename end def deserialize(params) @Namespace = params['Namespace'] @MetricName = params['MetricName'] @Unit = params['Unit'] @UnitCname = params['UnitCname'] @Period = params['Period'] unless params['Periods'].nil? @Periods = [] params['Periods'].each do |i| periodsst_tmp = PeriodsSt.new periodsst_tmp.deserialize(i) @Periods << periodsst_tmp end end unless params['Meaning'].nil? @Meaning = MetricObjectMeaning.new @Meaning.deserialize(params['Meaning']) end unless params['Dimensions'].nil? @Dimensions = [] params['Dimensions'].each do |i| dimensionsdesc_tmp = DimensionsDesc.new dimensionsdesc_tmp.deserialize(i) @Dimensions << dimensionsdesc_tmp end end @MetricCName = params['MetricCName'] @MetricEName = params['MetricEName'] end end # DescribeMidDimensionValueList的查询条件 class MidQueryCondition < TencentCloud::Common::AbstractModel # @param Key: 维度 # @type Key: String # @param Operator: 操作符,支持等于(eq)、不等于(ne),以及in # @type Operator: String # @param Value: 维度值,当Op是eq、ne时,只使用第一个元素 # @type Value: Array attr_accessor :Key, :Operator, :Value def initialize(key=nil, operator=nil, value=nil) @Key = key @Operator = operator @Value = value end def deserialize(params) @Key = params['Key'] @Operator = params['Operator'] @Value = params['Value'] end end # ModifyAlarmNotice请求参数结构体 class ModifyAlarmNoticeRequest < TencentCloud::Common::AbstractModel # @param Module: 模块名,这里填“monitor” # @type Module: String # @param Name: 告警通知规则名称 60字符以内 # @type Name: String # @param NoticeType: 通知类型 ALARM=未恢复通知 OK=已恢复通知 ALL=都通知 # @type NoticeType: String # @param NoticeLanguage: 通知语言 zh-CN=中文 en-US=英文 # @type NoticeLanguage: String # @param NoticeId: 告警通知模板 ID # @type NoticeId: String # @param UserNotices: 用户通知 最多5个 # @type UserNotices: Array # @param URLNotices: 回调通知 最多6个 # @type URLNotices: Array # @param CLSNotices: 告警通知推送到CLS服务 最多1个 # @type CLSNotices: Array # @param PolicyIds: 告警通知模板绑定的告警策略ID列表 # @type PolicyIds: Array attr_accessor :Module, :Name, :NoticeType, :NoticeLanguage, :NoticeId, :UserNotices, :URLNotices, :CLSNotices, :PolicyIds def initialize(_module=nil, name=nil, noticetype=nil, noticelanguage=nil, noticeid=nil, usernotices=nil, urlnotices=nil, clsnotices=nil, policyids=nil) @Module = _module @Name = name @NoticeType = noticetype @NoticeLanguage = noticelanguage @NoticeId = noticeid @UserNotices = usernotices @URLNotices = urlnotices @CLSNotices = clsnotices @PolicyIds = policyids end def deserialize(params) @Module = params['Module'] @Name = params['Name'] @NoticeType = params['NoticeType'] @NoticeLanguage = params['NoticeLanguage'] @NoticeId = params['NoticeId'] unless params['UserNotices'].nil? @UserNotices = [] params['UserNotices'].each do |i| usernotice_tmp = UserNotice.new usernotice_tmp.deserialize(i) @UserNotices << usernotice_tmp end end unless params['URLNotices'].nil? @URLNotices = [] params['URLNotices'].each do |i| urlnotice_tmp = URLNotice.new urlnotice_tmp.deserialize(i) @URLNotices << urlnotice_tmp end end unless params['CLSNotices'].nil? @CLSNotices = [] params['CLSNotices'].each do |i| clsnotice_tmp = CLSNotice.new clsnotice_tmp.deserialize(i) @CLSNotices << clsnotice_tmp end end @PolicyIds = params['PolicyIds'] end end # ModifyAlarmNotice返回参数结构体 class ModifyAlarmNoticeResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # ModifyAlarmPolicyCondition请求参数结构体 class ModifyAlarmPolicyConditionRequest < TencentCloud::Common::AbstractModel # @param Module: 模块名,固定值 monitor # @type Module: String # @param PolicyId: 告警策略 ID # @type PolicyId: String # @param ConditionTemplateId: 触发条件模板 Id,可不传 # @type ConditionTemplateId: Integer # @param Condition: 指标触发条件 # @type Condition: :class:`Tencentcloud::Monitor.v20180724.models.AlarmPolicyCondition` # @param EventCondition: 事件触发条件 # @type EventCondition: :class:`Tencentcloud::Monitor.v20180724.models.AlarmPolicyEventCondition` # @param Filter: 全局过滤条件 # @type Filter: :class:`Tencentcloud::Monitor.v20180724.models.AlarmPolicyFilter` # @param GroupBy: 聚合维度列表,指定按哪些维度 key 来做 group by # @type GroupBy: Array # @param LogAlarmReqInfo: 日志告警创建请求参数信息 # @type LogAlarmReqInfo: :class:`Tencentcloud::Monitor.v20180724.models.LogAlarmReq` # @param NoticeIds: 模板id,专供prom使用 # @type NoticeIds: Array # @param Enable: 启停状态,0=停用,1=启用 # @type Enable: Integer # @param PolicyName: 专供prom策略名称 # @type PolicyName: String # @param EbSubject: 事件配置的告警 # @type EbSubject: String attr_accessor :Module, :PolicyId, :ConditionTemplateId, :Condition, :EventCondition, :Filter, :GroupBy, :LogAlarmReqInfo, :NoticeIds, :Enable, :PolicyName, :EbSubject def initialize(_module=nil, policyid=nil, conditiontemplateid=nil, condition=nil, eventcondition=nil, filter=nil, groupby=nil, logalarmreqinfo=nil, noticeids=nil, enable=nil, policyname=nil, ebsubject=nil) @Module = _module @PolicyId = policyid @ConditionTemplateId = conditiontemplateid @Condition = condition @EventCondition = eventcondition @Filter = filter @GroupBy = groupby @LogAlarmReqInfo = logalarmreqinfo @NoticeIds = noticeids @Enable = enable @PolicyName = policyname @EbSubject = ebsubject end def deserialize(params) @Module = params['Module'] @PolicyId = params['PolicyId'] @ConditionTemplateId = params['ConditionTemplateId'] unless params['Condition'].nil? @Condition = AlarmPolicyCondition.new @Condition.deserialize(params['Condition']) end unless params['EventCondition'].nil? @EventCondition = AlarmPolicyEventCondition.new @EventCondition.deserialize(params['EventCondition']) end unless params['Filter'].nil? @Filter = AlarmPolicyFilter.new @Filter.deserialize(params['Filter']) end @GroupBy = params['GroupBy'] unless params['LogAlarmReqInfo'].nil? @LogAlarmReqInfo = LogAlarmReq.new @LogAlarmReqInfo.deserialize(params['LogAlarmReqInfo']) end @NoticeIds = params['NoticeIds'] @Enable = params['Enable'] @PolicyName = params['PolicyName'] @EbSubject = params['EbSubject'] end end # ModifyAlarmPolicyCondition返回参数结构体 class ModifyAlarmPolicyConditionResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # ModifyAlarmPolicyInfo请求参数结构体 class ModifyAlarmPolicyInfoRequest < TencentCloud::Common::AbstractModel # @param Module: 模块名,这里填“monitor” # @type Module: String # @param PolicyId: 告警策略 ID # @type PolicyId: String # @param Key: 要修改的字段 NAME=策略名称 REMARK=策略备注 # @type Key: String # @param Value: 修改后的值 # @type Value: String attr_accessor :Module, :PolicyId, :Key, :Value def initialize(_module=nil, policyid=nil, key=nil, value=nil) @Module = _module @PolicyId = policyid @Key = key @Value = value end def deserialize(params) @Module = params['Module'] @PolicyId = params['PolicyId'] @Key = params['Key'] @Value = params['Value'] end end # ModifyAlarmPolicyInfo返回参数结构体 class ModifyAlarmPolicyInfoResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # ModifyAlarmPolicyNotice请求参数结构体 class ModifyAlarmPolicyNoticeRequest < TencentCloud::Common::AbstractModel # @param Module: 模块名,这里填“monitor”。 # @type Module: String # @param PolicyId: 告警策略 ID,如果该参数与PolicyIds参数同时存在,则以PolicyIds为准。 # @type PolicyId: String # @param NoticeIds: 告警通知模板 ID 列表。 # @type NoticeIds: Array # @param PolicyIds: 告警策略ID数组,支持给多个告警策略批量绑定通知模板。最多30个。 # @type PolicyIds: Array # @param HierarchicalNotices: 告警分级通知规则配置 # @type HierarchicalNotices: Array attr_accessor :Module, :PolicyId, :NoticeIds, :PolicyIds, :HierarchicalNotices def initialize(_module=nil, policyid=nil, noticeids=nil, policyids=nil, hierarchicalnotices=nil) @Module = _module @PolicyId = policyid @NoticeIds = noticeids @PolicyIds = policyids @HierarchicalNotices = hierarchicalnotices end def deserialize(params) @Module = params['Module'] @PolicyId = params['PolicyId'] @NoticeIds = params['NoticeIds'] @PolicyIds = params['PolicyIds'] unless params['HierarchicalNotices'].nil? @HierarchicalNotices = [] params['HierarchicalNotices'].each do |i| alarmhierarchicalnotice_tmp = AlarmHierarchicalNotice.new alarmhierarchicalnotice_tmp.deserialize(i) @HierarchicalNotices << alarmhierarchicalnotice_tmp end end end end # ModifyAlarmPolicyNotice返回参数结构体 class ModifyAlarmPolicyNoticeResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # ModifyAlarmPolicyStatus请求参数结构体 class ModifyAlarmPolicyStatusRequest < TencentCloud::Common::AbstractModel # @param Module: 模块名,固定值 monitor # @type Module: String # @param PolicyId: 告警策略 ID # @type PolicyId: String # @param Enable: 启停状态 0=停用 1=启用 # @type Enable: Integer attr_accessor :Module, :PolicyId, :Enable def initialize(_module=nil, policyid=nil, enable=nil) @Module = _module @PolicyId = policyid @Enable = enable end def deserialize(params) @Module = params['Module'] @PolicyId = params['PolicyId'] @Enable = params['Enable'] end end # ModifyAlarmPolicyStatus返回参数结构体 class ModifyAlarmPolicyStatusResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # ModifyAlarmPolicyTasks请求参数结构体 class ModifyAlarmPolicyTasksRequest < TencentCloud::Common::AbstractModel # @param Module: 模块名,这里填“monitor” # @type Module: String # @param PolicyId: 告警策略 ID # @type PolicyId: String # @param TriggerTasks: 告警策略触发任务列表,空数据代表解绑 # @type TriggerTasks: Array attr_accessor :Module, :PolicyId, :TriggerTasks def initialize(_module=nil, policyid=nil, triggertasks=nil) @Module = _module @PolicyId = policyid @TriggerTasks = triggertasks end def deserialize(params) @Module = params['Module'] @PolicyId = params['PolicyId'] unless params['TriggerTasks'].nil? @TriggerTasks = [] params['TriggerTasks'].each do |i| alarmpolicytriggertask_tmp = AlarmPolicyTriggerTask.new alarmpolicytriggertask_tmp.deserialize(i) @TriggerTasks << alarmpolicytriggertask_tmp end end end end # ModifyAlarmPolicyTasks返回参数结构体 class ModifyAlarmPolicyTasksResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # ModifyAlarmReceivers请求参数结构体 class ModifyAlarmReceiversRequest < TencentCloud::Common::AbstractModel # @param GroupId: 需要修改接收人的策略组Id # @type GroupId: Integer # @param Module: 必填。固定为“monitor” # @type Module: String # @param ReceiverInfos: 新接收人信息, 没有填写则删除所有接收人 # @type ReceiverInfos: Array attr_accessor :GroupId, :Module, :ReceiverInfos def initialize(groupid=nil, _module=nil, receiverinfos=nil) @GroupId = groupid @Module = _module @ReceiverInfos = receiverinfos end def deserialize(params) @GroupId = params['GroupId'] @Module = params['Module'] unless params['ReceiverInfos'].nil? @ReceiverInfos = [] params['ReceiverInfos'].each do |i| receiverinfo_tmp = ReceiverInfo.new receiverinfo_tmp.deserialize(i) @ReceiverInfos << receiverinfo_tmp end end end end # ModifyAlarmReceivers返回参数结构体 class ModifyAlarmReceiversResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # ModifyGrafanaInstance请求参数结构体 class ModifyGrafanaInstanceRequest < TencentCloud::Common::AbstractModel # @param InstanceId: Grafana 实例 ID,例如:grafana-abcdefgh # @type InstanceId: String # @param InstanceName: Grafana 实例名称,例如:test # @type InstanceName: String attr_accessor :InstanceId, :InstanceName def initialize(instanceid=nil, instancename=nil) @InstanceId = instanceid @InstanceName = instancename end def deserialize(params) @InstanceId = params['InstanceId'] @InstanceName = params['InstanceName'] end end # ModifyGrafanaInstance返回参数结构体 class ModifyGrafanaInstanceResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # 修改告警策略组传入的指标阈值条件 class ModifyPolicyGroupCondition < TencentCloud::Common::AbstractModel # @param MetricId: 指标id # @type MetricId: Integer # @param CalcType: 比较类型,1表示大于,2表示大于等于,3表示小于,4表示小于等于,5表示相等,6表示不相等 # @type CalcType: Integer # @param CalcValue: 检测阈值 # @type CalcValue: String # @param CalcPeriod: 检测指标的数据周期 # @type CalcPeriod: Integer # @param ContinuePeriod: 持续周期个数 # @type ContinuePeriod: Integer # @param AlarmNotifyType: 告警发送收敛类型。0连续告警,1指数告警 # @type AlarmNotifyType: Integer # @param AlarmNotifyPeriod: 告警发送周期单位秒。<0 不触发, 0 只触发一次, >0 每隔triggerTime秒触发一次 # @type AlarmNotifyPeriod: Integer # @param RuleId: 规则id,不填表示新增,填写了ruleId表示在已存在的规则基础上进行修改 # @type RuleId: Integer attr_accessor :MetricId, :CalcType, :CalcValue, :CalcPeriod, :ContinuePeriod, :AlarmNotifyType, :AlarmNotifyPeriod, :RuleId def initialize(metricid=nil, calctype=nil, calcvalue=nil, calcperiod=nil, continueperiod=nil, alarmnotifytype=nil, alarmnotifyperiod=nil, ruleid=nil) @MetricId = metricid @CalcType = calctype @CalcValue = calcvalue @CalcPeriod = calcperiod @ContinuePeriod = continueperiod @AlarmNotifyType = alarmnotifytype @AlarmNotifyPeriod = alarmnotifyperiod @RuleId = ruleid end def deserialize(params) @MetricId = params['MetricId'] @CalcType = params['CalcType'] @CalcValue = params['CalcValue'] @CalcPeriod = params['CalcPeriod'] @ContinuePeriod = params['ContinuePeriod'] @AlarmNotifyType = params['AlarmNotifyType'] @AlarmNotifyPeriod = params['AlarmNotifyPeriod'] @RuleId = params['RuleId'] end end # 修改告警策略组传入的事件告警条件 class ModifyPolicyGroupEventCondition < TencentCloud::Common::AbstractModel # @param EventId: 事件id # @type EventId: Integer # @param AlarmNotifyType: 告警发送收敛类型。0连续告警,1指数告警 # @type AlarmNotifyType: Integer # @param AlarmNotifyPeriod: 告警发送周期单位秒。<0 不触发, 0 只触发一次, >0 每隔triggerTime秒触发一次 # @type AlarmNotifyPeriod: Integer # @param RuleId: 规则id,不填表示新增,填写了ruleId表示在已存在的规则基础上进行修改 # @type RuleId: Integer attr_accessor :EventId, :AlarmNotifyType, :AlarmNotifyPeriod, :RuleId def initialize(eventid=nil, alarmnotifytype=nil, alarmnotifyperiod=nil, ruleid=nil) @EventId = eventid @AlarmNotifyType = alarmnotifytype @AlarmNotifyPeriod = alarmnotifyperiod @RuleId = ruleid end def deserialize(params) @EventId = params['EventId'] @AlarmNotifyType = params['AlarmNotifyType'] @AlarmNotifyPeriod = params['AlarmNotifyPeriod'] @RuleId = params['RuleId'] end end # ModifyPolicyGroup请求参数结构体 class ModifyPolicyGroupRequest < TencentCloud::Common::AbstractModel # @param Module: 固定值,为"monitor" # @type Module: String # @param GroupId: 策略组id # @type GroupId: Integer # @param ViewName: 告警类型 # @type ViewName: String # @param GroupName: 策略组名称 # @type GroupName: String # @param IsUnionRule: 指标告警条件的且或关系,1表示且告警,所有指标告警条件都达到才告警,0表示或告警,任意指标告警条件达到都告警 # @type IsUnionRule: Integer # @param Conditions: 指标告警条件规则,不填表示删除已有的所有指标告警条件规则 # @type Conditions: Array # @param EventConditions: 事件告警条件,不填表示删除已有的事件告警条件 # @type EventConditions: Array # @param ConditionTempGroupId: 模板策略组id # @type ConditionTempGroupId: Integer attr_accessor :Module, :GroupId, :ViewName, :GroupName, :IsUnionRule, :Conditions, :EventConditions, :ConditionTempGroupId def initialize(_module=nil, groupid=nil, viewname=nil, groupname=nil, isunionrule=nil, conditions=nil, eventconditions=nil, conditiontempgroupid=nil) @Module = _module @GroupId = groupid @ViewName = viewname @GroupName = groupname @IsUnionRule = isunionrule @Conditions = conditions @EventConditions = eventconditions @ConditionTempGroupId = conditiontempgroupid end def deserialize(params) @Module = params['Module'] @GroupId = params['GroupId'] @ViewName = params['ViewName'] @GroupName = params['GroupName'] @IsUnionRule = params['IsUnionRule'] unless params['Conditions'].nil? @Conditions = [] params['Conditions'].each do |i| modifypolicygroupcondition_tmp = ModifyPolicyGroupCondition.new modifypolicygroupcondition_tmp.deserialize(i) @Conditions << modifypolicygroupcondition_tmp end end unless params['EventConditions'].nil? @EventConditions = [] params['EventConditions'].each do |i| modifypolicygroupeventcondition_tmp = ModifyPolicyGroupEventCondition.new modifypolicygroupeventcondition_tmp.deserialize(i) @EventConditions << modifypolicygroupeventcondition_tmp end end @ConditionTempGroupId = params['ConditionTempGroupId'] end end # ModifyPolicyGroup返回参数结构体 class ModifyPolicyGroupResponse < TencentCloud::Common::AbstractModel # @param GroupId: 策略组id # @type GroupId: Integer # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :GroupId, :RequestId def initialize(groupid=nil, requestid=nil) @GroupId = groupid @RequestId = requestid end def deserialize(params) @GroupId = params['GroupId'] @RequestId = params['RequestId'] end end # ModifyPrometheusAgentExternalLabels请求参数结构体 class ModifyPrometheusAgentExternalLabelsRequest < TencentCloud::Common::AbstractModel # @param InstanceId: 实例ID # @type InstanceId: String # @param ClusterId: 集群ID # @type ClusterId: String # @param ExternalLabels: 新的external_labels # @type ExternalLabels: Array attr_accessor :InstanceId, :ClusterId, :ExternalLabels def initialize(instanceid=nil, clusterid=nil, externallabels=nil) @InstanceId = instanceid @ClusterId = clusterid @ExternalLabels = externallabels end def deserialize(params) @InstanceId = params['InstanceId'] @ClusterId = params['ClusterId'] unless params['ExternalLabels'].nil? @ExternalLabels = [] params['ExternalLabels'].each do |i| label_tmp = Label.new label_tmp.deserialize(i) @ExternalLabels << label_tmp end end end end # ModifyPrometheusAgentExternalLabels返回参数结构体 class ModifyPrometheusAgentExternalLabelsResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # ModifyPrometheusAlertPolicy请求参数结构体 class ModifyPrometheusAlertPolicyRequest < TencentCloud::Common::AbstractModel # @param InstanceId: Prometheus 实例 ID # @type InstanceId: String # @param AlertRule: 告警配置,[具体参考](https://cloud.tencent.com/document/api/248/30354#PrometheusAlertPolicyItem) # @type AlertRule: :class:`Tencentcloud::Monitor.v20180724.models.PrometheusAlertPolicyItem` attr_accessor :InstanceId, :AlertRule def initialize(instanceid=nil, alertrule=nil) @InstanceId = instanceid @AlertRule = alertrule end def deserialize(params) @InstanceId = params['InstanceId'] unless params['AlertRule'].nil? @AlertRule = PrometheusAlertPolicyItem.new @AlertRule.deserialize(params['AlertRule']) end end end # ModifyPrometheusAlertPolicy返回参数结构体 class ModifyPrometheusAlertPolicyResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # ModifyPrometheusConfig请求参数结构体 class ModifyPrometheusConfigRequest < TencentCloud::Common::AbstractModel # @param InstanceId: 实例id # @type InstanceId: String # @param ClusterType: 集群类型 # @type ClusterType: String # @param ClusterId: 集群id # @type ClusterId: String # @param ServiceMonitors: ServiceMonitors配置 # @type ServiceMonitors: Array # @param PodMonitors: PodMonitors配置 # @type PodMonitors: Array # @param RawJobs: prometheus原生Job配置 # @type RawJobs: Array # @param UpdateImage: 0: 更新实例组件镜像版本; # 1: 不更新实例组件镜像版本 # @type UpdateImage: Integer attr_accessor :InstanceId, :ClusterType, :ClusterId, :ServiceMonitors, :PodMonitors, :RawJobs, :UpdateImage def initialize(instanceid=nil, clustertype=nil, clusterid=nil, servicemonitors=nil, podmonitors=nil, rawjobs=nil, updateimage=nil) @InstanceId = instanceid @ClusterType = clustertype @ClusterId = clusterid @ServiceMonitors = servicemonitors @PodMonitors = podmonitors @RawJobs = rawjobs @UpdateImage = updateimage end def deserialize(params) @InstanceId = params['InstanceId'] @ClusterType = params['ClusterType'] @ClusterId = params['ClusterId'] unless params['ServiceMonitors'].nil? @ServiceMonitors = [] params['ServiceMonitors'].each do |i| prometheusconfigitem_tmp = PrometheusConfigItem.new prometheusconfigitem_tmp.deserialize(i) @ServiceMonitors << prometheusconfigitem_tmp end end unless params['PodMonitors'].nil? @PodMonitors = [] params['PodMonitors'].each do |i| prometheusconfigitem_tmp = PrometheusConfigItem.new prometheusconfigitem_tmp.deserialize(i) @PodMonitors << prometheusconfigitem_tmp end end unless params['RawJobs'].nil? @RawJobs = [] params['RawJobs'].each do |i| prometheusconfigitem_tmp = PrometheusConfigItem.new prometheusconfigitem_tmp.deserialize(i) @RawJobs << prometheusconfigitem_tmp end end @UpdateImage = params['UpdateImage'] end end # ModifyPrometheusConfig返回参数结构体 class ModifyPrometheusConfigResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # ModifyPrometheusGlobalNotification请求参数结构体 class ModifyPrometheusGlobalNotificationRequest < TencentCloud::Common::AbstractModel # @param InstanceId: 实例ID # @type InstanceId: String # @param Notification: 告警通知渠道 # @type Notification: :class:`Tencentcloud::Monitor.v20180724.models.PrometheusNotificationItem` attr_accessor :InstanceId, :Notification def initialize(instanceid=nil, notification=nil) @InstanceId = instanceid @Notification = notification end def deserialize(params) @InstanceId = params['InstanceId'] unless params['Notification'].nil? @Notification = PrometheusNotificationItem.new @Notification.deserialize(params['Notification']) end end end # ModifyPrometheusGlobalNotification返回参数结构体 class ModifyPrometheusGlobalNotificationResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # ModifyPrometheusInstanceAttributes请求参数结构体 class ModifyPrometheusInstanceAttributesRequest < TencentCloud::Common::AbstractModel # @param InstanceId: 实例 ID # @type InstanceId: String # @param InstanceName: 实例名称 # @type InstanceName: String # @param DataRetentionTime: 数据存储时间(单位天),限制值为15, 30, 45, 90, 180, 365, 730之一 # @type DataRetentionTime: Integer attr_accessor :InstanceId, :InstanceName, :DataRetentionTime def initialize(instanceid=nil, instancename=nil, dataretentiontime=nil) @InstanceId = instanceid @InstanceName = instancename @DataRetentionTime = dataretentiontime end def deserialize(params) @InstanceId = params['InstanceId'] @InstanceName = params['InstanceName'] @DataRetentionTime = params['DataRetentionTime'] end end # ModifyPrometheusInstanceAttributes返回参数结构体 class ModifyPrometheusInstanceAttributesResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # ModifyPrometheusRecordRuleYaml请求参数结构体 class ModifyPrometheusRecordRuleYamlRequest < TencentCloud::Common::AbstractModel # @param InstanceId: 实例id # @type InstanceId: String # @param Name: 聚合实例名称 # @type Name: String # @param Content: 新的内容 # @type Content: String attr_accessor :InstanceId, :Name, :Content def initialize(instanceid=nil, name=nil, content=nil) @InstanceId = instanceid @Name = name @Content = content end def deserialize(params) @InstanceId = params['InstanceId'] @Name = params['Name'] @Content = params['Content'] end end # ModifyPrometheusRecordRuleYaml返回参数结构体 class ModifyPrometheusRecordRuleYamlResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # ModifyPrometheusTemp请求参数结构体 class ModifyPrometheusTempRequest < TencentCloud::Common::AbstractModel # @param TemplateId: 模板ID # @type TemplateId: String # @param Template: 修改内容 # @type Template: :class:`Tencentcloud::Monitor.v20180724.models.PrometheusTempModify` attr_accessor :TemplateId, :Template def initialize(templateid=nil, template=nil) @TemplateId = templateid @Template = template end def deserialize(params) @TemplateId = params['TemplateId'] unless params['Template'].nil? @Template = PrometheusTempModify.new @Template.deserialize(params['Template']) end end end # ModifyPrometheusTemp返回参数结构体 class ModifyPrometheusTempResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # 监控类型详细信息 class MonitorTypeInfo < TencentCloud::Common::AbstractModel # @param Id: 监控类型ID # @type Id: String # @param Name: 监控类型 # @type Name: String # @param SortId: 排列顺序 # @type SortId: Integer attr_accessor :Id, :Name, :SortId def initialize(id=nil, name=nil, sortid=nil) @Id = id @Name = name @SortId = sortid end def deserialize(params) @Id = params['Id'] @Name = params['Name'] @SortId = params['SortId'] end end # 策略类型 class MonitorTypeNamespace < TencentCloud::Common::AbstractModel # @param MonitorType: 监控类型 # @type MonitorType: String # @param Namespace: 策略类型值 # @type Namespace: String attr_accessor :MonitorType, :Namespace def initialize(monitortype=nil, namespace=nil) @MonitorType = monitortype @Namespace = namespace end def deserialize(params) @MonitorType = params['MonitorType'] @Namespace = params['Namespace'] end end # 通知模板与策略绑定关系 class NoticeBindPolicys < TencentCloud::Common::AbstractModel # @param NoticeId: 告警通知模板 ID # @type NoticeId: String # @param PolicyIds: 告警通知模板绑定的告警策略ID列表 # @type PolicyIds: Array attr_accessor :NoticeId, :PolicyIds def initialize(noticeid=nil, policyids=nil) @NoticeId = noticeid @PolicyIds = policyids end def deserialize(params) @NoticeId = params['NoticeId'] @PolicyIds = params['PolicyIds'] end end # 维度支持的操作符信息 class Operator < TencentCloud::Common::AbstractModel # @param Id: 运算符标识 # @type Id: String # @param Name: 运算符展示名 # @type Name: String attr_accessor :Id, :Name def initialize(id=nil, name=nil) @Id = id @Name = name end def deserialize(params) @Id = params['Id'] @Name = params['Name'] end end # 周期内的统计方式 class PeriodsSt < TencentCloud::Common::AbstractModel # @param Period: 周期 # @type Period: String # @param StatType: 统计方式 # @type StatType: Array attr_accessor :Period, :StatType def initialize(period=nil, stattype=nil) @Period = period @StatType = stattype end def deserialize(params) @Period = params['Period'] @StatType = params['StatType'] end end # 监控数据点 class Point < TencentCloud::Common::AbstractModel # @param Timestamp: 该监控数据点生成的时间点 # @type Timestamp: Integer # @param Value: 监控数据点的值 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Value: Float attr_accessor :Timestamp, :Value def initialize(timestamp=nil, value=nil) @Timestamp = timestamp @Value = value end def deserialize(params) @Timestamp = params['Timestamp'] @Value = params['Value'] end end # 策略组信息 class PolicyGroup < TencentCloud::Common::AbstractModel # @param CanSetDefault: 是否可设为默认告警策略 # @type CanSetDefault: Boolean # @param GroupID: 告警策略组ID # @type GroupID: Integer # @param GroupName: 告警策略组名称 # @type GroupName: String # @param InsertTime: 创建时间 # @type InsertTime: Integer # @param IsDefault: 是否为默认告警策略 # @type IsDefault: Integer # @param Enable: 告警策略启用状态 # @type Enable: Boolean # @param LastEditUin: 最后修改人UIN # @type LastEditUin: Integer # @param NoShieldedInstanceCount: 未屏蔽的实例数 # @type NoShieldedInstanceCount: Integer # @param ParentGroupID: 父策略组ID # @type ParentGroupID: Integer # @param ProjectID: 所属项目ID # @type ProjectID: Integer # @param ReceiverInfos: 告警接收对象信息 # 注意:此字段可能返回 null,表示取不到有效值。 # @type ReceiverInfos: Array # @param Remark: 备注信息 # @type Remark: String # @param UpdateTime: 修改时间 # @type UpdateTime: Integer # @param TotalInstanceCount: 总绑定实例数 # @type TotalInstanceCount: Integer # @param ViewName: 视图 # @type ViewName: String # @param IsUnionRule: 是否为与关系规则 # @type IsUnionRule: Integer attr_accessor :CanSetDefault, :GroupID, :GroupName, :InsertTime, :IsDefault, :Enable, :LastEditUin, :NoShieldedInstanceCount, :ParentGroupID, :ProjectID, :ReceiverInfos, :Remark, :UpdateTime, :TotalInstanceCount, :ViewName, :IsUnionRule def initialize(cansetdefault=nil, groupid=nil, groupname=nil, inserttime=nil, isdefault=nil, enable=nil, lastedituin=nil, noshieldedinstancecount=nil, parentgroupid=nil, projectid=nil, receiverinfos=nil, remark=nil, updatetime=nil, totalinstancecount=nil, viewname=nil, isunionrule=nil) @CanSetDefault = cansetdefault @GroupID = groupid @GroupName = groupname @InsertTime = inserttime @IsDefault = isdefault @Enable = enable @LastEditUin = lastedituin @NoShieldedInstanceCount = noshieldedinstancecount @ParentGroupID = parentgroupid @ProjectID = projectid @ReceiverInfos = receiverinfos @Remark = remark @UpdateTime = updatetime @TotalInstanceCount = totalinstancecount @ViewName = viewname @IsUnionRule = isunionrule end def deserialize(params) @CanSetDefault = params['CanSetDefault'] @GroupID = params['GroupID'] @GroupName = params['GroupName'] @InsertTime = params['InsertTime'] @IsDefault = params['IsDefault'] @Enable = params['Enable'] @LastEditUin = params['LastEditUin'] @NoShieldedInstanceCount = params['NoShieldedInstanceCount'] @ParentGroupID = params['ParentGroupID'] @ProjectID = params['ProjectID'] unless params['ReceiverInfos'].nil? @ReceiverInfos = [] params['ReceiverInfos'].each do |i| policygroupreceiverinfo_tmp = PolicyGroupReceiverInfo.new policygroupreceiverinfo_tmp.deserialize(i) @ReceiverInfos << policygroupreceiverinfo_tmp end end @Remark = params['Remark'] @UpdateTime = params['UpdateTime'] @TotalInstanceCount = params['TotalInstanceCount'] @ViewName = params['ViewName'] @IsUnionRule = params['IsUnionRule'] end end # 2018版策略模板列表接收人信息 class PolicyGroupReceiverInfo < TencentCloud::Common::AbstractModel # @param EndTime: 有效时段结束时间 # @type EndTime: Integer # @param NeedSendNotice: 是否需要发送通知 # @type NeedSendNotice: Integer # @param NotifyWay: 告警接收渠道 # 注意:此字段可能返回 null,表示取不到有效值。 # @type NotifyWay: Array # @param PersonInterval: 电话告警对个人间隔(秒) # @type PersonInterval: Integer # @param ReceiverGroupList: 消息接收组列表 # 注意:此字段可能返回 null,表示取不到有效值。 # @type ReceiverGroupList: Array # @param ReceiverType: 接受者类型 # @type ReceiverType: String # @param ReceiverUserList: 接收人列表。通过平台接口查询到的接收人id列表 # 注意:此字段可能返回 null,表示取不到有效值。 # @type ReceiverUserList: Array # @param RecoverNotify: 告警恢复通知方式 # 注意:此字段可能返回 null,表示取不到有效值。 # @type RecoverNotify: Array # @param RoundInterval: 电话告警每轮间隔(秒) # @type RoundInterval: Integer # @param RoundNumber: 电话告警轮数 # @type RoundNumber: Integer # @param SendFor: 电话告警通知时机。可选"OCCUR"(告警时通知),"RECOVER"(恢复时通知) # 注意:此字段可能返回 null,表示取不到有效值。 # @type SendFor: Array # @param StartTime: 有效时段开始时间 # @type StartTime: Integer # @param UIDList: 电话告警接收者uid # 注意:此字段可能返回 null,表示取不到有效值。 # @type UIDList: Array attr_accessor :EndTime, :NeedSendNotice, :NotifyWay, :PersonInterval, :ReceiverGroupList, :ReceiverType, :ReceiverUserList, :RecoverNotify, :RoundInterval, :RoundNumber, :SendFor, :StartTime, :UIDList def initialize(endtime=nil, needsendnotice=nil, notifyway=nil, personinterval=nil, receivergrouplist=nil, receivertype=nil, receiveruserlist=nil, recovernotify=nil, roundinterval=nil, roundnumber=nil, sendfor=nil, starttime=nil, uidlist=nil) @EndTime = endtime @NeedSendNotice = needsendnotice @NotifyWay = notifyway @PersonInterval = personinterval @ReceiverGroupList = receivergrouplist @ReceiverType = receivertype @ReceiverUserList = receiveruserlist @RecoverNotify = recovernotify @RoundInterval = roundinterval @RoundNumber = roundnumber @SendFor = sendfor @StartTime = starttime @UIDList = uidlist end def deserialize(params) @EndTime = params['EndTime'] @NeedSendNotice = params['NeedSendNotice'] @NotifyWay = params['NotifyWay'] @PersonInterval = params['PersonInterval'] @ReceiverGroupList = params['ReceiverGroupList'] @ReceiverType = params['ReceiverType'] @ReceiverUserList = params['ReceiverUserList'] @RecoverNotify = params['RecoverNotify'] @RoundInterval = params['RoundInterval'] @RoundNumber = params['RoundNumber'] @SendFor = params['SendFor'] @StartTime = params['StartTime'] @UIDList = params['UIDList'] end end # 策略标签 class PolicyTag < TencentCloud::Common::AbstractModel # @param Key: 标签Key # @type Key: String # @param Value: 标签Value # @type Value: String attr_accessor :Key, :Value def initialize(key=nil, value=nil) @Key = key @Value = value end def deserialize(params) @Key = params['Key'] @Value = params['Value'] end end # 云产品监控支持的产品简要信息 class ProductSimple < TencentCloud::Common::AbstractModel # @param Namespace: 命名空间 # @type Namespace: String # @param ProductName: 产品中文名称 # @type ProductName: String # @param ProductEnName: 产品英文名称 # 注意:此字段可能返回 null,表示取不到有效值。 # @type ProductEnName: String attr_accessor :Namespace, :ProductName, :ProductEnName def initialize(namespace=nil, productname=nil, productenname=nil) @Namespace = namespace @ProductName = productname @ProductEnName = productenname end def deserialize(params) @Namespace = params['Namespace'] @ProductName = params['ProductName'] @ProductEnName = params['ProductEnName'] end end # prometheus agent class PrometheusAgent < TencentCloud::Common::AbstractModel # @param Name: Agent 名 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Name: String # @param AgentId: Agent ID # @type AgentId: String # @param InstanceId: 实例 ID # @type InstanceId: String # @param Ipv4: Agent IP # 注意:此字段可能返回 null,表示取不到有效值。 # @type Ipv4: String # @param HeartbeatTime: 心跳时间 # 注意:此字段可能返回 null,表示取不到有效值。 # @type HeartbeatTime: String # @param LastError: 最近一次错误 # 注意:此字段可能返回 null,表示取不到有效值。 # @type LastError: String # @param AgentVersion: Agent 版本 # 注意:此字段可能返回 null,表示取不到有效值。 # @type AgentVersion: String # @param Status: Agent 状态 # @type Status: Integer attr_accessor :Name, :AgentId, :InstanceId, :Ipv4, :HeartbeatTime, :LastError, :AgentVersion, :Status def initialize(name=nil, agentid=nil, instanceid=nil, ipv4=nil, heartbeattime=nil, lasterror=nil, agentversion=nil, status=nil) @Name = name @AgentId = agentid @InstanceId = instanceid @Ipv4 = ipv4 @HeartbeatTime = heartbeattime @LastError = lasterror @AgentVersion = agentversion @Status = status end def deserialize(params) @Name = params['Name'] @AgentId = params['AgentId'] @InstanceId = params['InstanceId'] @Ipv4 = params['Ipv4'] @HeartbeatTime = params['HeartbeatTime'] @LastError = params['LastError'] @AgentVersion = params['AgentVersion'] @Status = params['Status'] end end # 托管Prometheus agent信息 class PrometheusAgentInfo < TencentCloud::Common::AbstractModel # @param ClusterType: 集群类型。可填入tke、eks、tkeedge、tdcc,分别代表标准集群、弹性集群、边缘集群、注册集群 # @type ClusterType: String # @param ClusterId: 集成容器服务中关联的集群ID # @type ClusterId: String # @param Describe: 该参数未使用,不需要填写 # @type Describe: String attr_accessor :ClusterType, :ClusterId, :Describe def initialize(clustertype=nil, clusterid=nil, describe=nil) @ClusterType = clustertype @ClusterId = clusterid @Describe = describe end def deserialize(params) @ClusterType = params['ClusterType'] @ClusterId = params['ClusterId'] @Describe = params['Describe'] end end # 托管prometheus agent概览 class PrometheusAgentOverview < TencentCloud::Common::AbstractModel # @param ClusterType: 集群类型 # @type ClusterType: String # @param ClusterId: 集群id # @type ClusterId: String # @param Status: agent状态 # normal = 正常 # abnormal = 异常 # @type Status: String # @param ClusterName: 集群名称 # @type ClusterName: String # @param ExternalLabels: 额外labels # 本集群的所有指标都会带上这几个label # 注意:此字段可能返回 null,表示取不到有效值。 # @type ExternalLabels: Array # @param Region: 集群所在地域 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Region: String # @param VpcId: 集群所在VPC ID # 注意:此字段可能返回 null,表示取不到有效值。 # @type VpcId: String # @param FailedReason: 记录关联等操作的失败信息 # 注意:此字段可能返回 null,表示取不到有效值。 # @type FailedReason: String # @param Name: agent名称 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Name: String # @param EnableExternal: 是否已开启公网访问,true 开启,false 未开启 # 注意:此字段可能返回 null,表示取不到有效值。 # @type EnableExternal: Boolean # @param DesiredAgentNum: 采集agent期望pod数 # 注意:此字段可能返回 null,表示取不到有效值。 # @type DesiredAgentNum: Integer # @param ReadyAgentNum: 采集agent已正常启动pod数 # 注意:此字段可能返回 null,表示取不到有效值。 # @type ReadyAgentNum: Integer attr_accessor :ClusterType, :ClusterId, :Status, :ClusterName, :ExternalLabels, :Region, :VpcId, :FailedReason, :Name, :EnableExternal, :DesiredAgentNum, :ReadyAgentNum def initialize(clustertype=nil, clusterid=nil, status=nil, clustername=nil, externallabels=nil, region=nil, vpcid=nil, failedreason=nil, name=nil, enableexternal=nil, desiredagentnum=nil, readyagentnum=nil) @ClusterType = clustertype @ClusterId = clusterid @Status = status @ClusterName = clustername @ExternalLabels = externallabels @Region = region @VpcId = vpcid @FailedReason = failedreason @Name = name @EnableExternal = enableexternal @DesiredAgentNum = desiredagentnum @ReadyAgentNum = readyagentnum end def deserialize(params) @ClusterType = params['ClusterType'] @ClusterId = params['ClusterId'] @Status = params['Status'] @ClusterName = params['ClusterName'] unless params['ExternalLabels'].nil? @ExternalLabels = [] params['ExternalLabels'].each do |i| label_tmp = Label.new label_tmp.deserialize(i) @ExternalLabels << label_tmp end end @Region = params['Region'] @VpcId = params['VpcId'] @FailedReason = params['FailedReason'] @Name = params['Name'] @EnableExternal = params['EnableExternal'] @DesiredAgentNum = params['DesiredAgentNum'] @ReadyAgentNum = params['ReadyAgentNum'] end end # Prometheus自定义告警通知时间段 class PrometheusAlertAllowTimeRange < TencentCloud::Common::AbstractModel # @param Start: 从0点开始的秒数 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Start: String # @param End: 从0点开始的秒数 # 注意:此字段可能返回 null,表示取不到有效值。 # @type End: String attr_accessor :Start, :End def initialize(start=nil, _end=nil) @Start = start @End = _end end def deserialize(params) @Start = params['Start'] @End = params['End'] end end # Prometheus告警自定义通知模板 class PrometheusAlertCustomReceiver < TencentCloud::Common::AbstractModel # @param Type: 自定义通知类型 # alertmanager -- vpc内自建alertmanager # webhook -- vpc内webhook地址 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Type: String # @param Url: alertmanager/webhook地址。(prometheus实例同vpc内ip) # 注意:此字段可能返回 null,表示取不到有效值。 # @type Url: String # @param AllowedTimeRanges: 允许发送告警的时间范围 # 注意:此字段可能返回 null,表示取不到有效值。 # @type AllowedTimeRanges: Array # @param ClusterId: alertmanager所在的内网集群ID # 注意:此字段可能返回 null,表示取不到有效值。 # @type ClusterId: String # @param ClusterType: alertmanager所在的内网集群类型(tke/eks/tdcc) # 注意:此字段可能返回 null,表示取不到有效值。 # @type ClusterType: String attr_accessor :Type, :Url, :AllowedTimeRanges, :ClusterId, :ClusterType def initialize(type=nil, url=nil, allowedtimeranges=nil, clusterid=nil, clustertype=nil) @Type = type @Url = url @AllowedTimeRanges = allowedtimeranges @ClusterId = clusterid @ClusterType = clustertype end def deserialize(params) @Type = params['Type'] @Url = params['Url'] unless params['AllowedTimeRanges'].nil? @AllowedTimeRanges = [] params['AllowedTimeRanges'].each do |i| prometheusalertallowtimerange_tmp = PrometheusAlertAllowTimeRange.new prometheusalertallowtimerange_tmp.deserialize(i) @AllowedTimeRanges << prometheusalertallowtimerange_tmp end end @ClusterId = params['ClusterId'] @ClusterType = params['ClusterType'] end end # 告警分组内告警规则信息 class PrometheusAlertGroupRuleSet < TencentCloud::Common::AbstractModel # @param RuleName: 告警规则名称,同一告警分组下不允许重名 # 注意:此字段可能返回 null,表示取不到有效值。 # @type RuleName: String # @param Labels: 标签列表 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Labels: Array # @param Annotations: 注释列表 # 告警对象和告警消息是 Prometheus Rule Annotations 的特殊字段,需要通过 annotations 来传递,对应的 Key 分别为summary/description。 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Annotations: Array # @param Duration: 规则报警持续时间 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Duration: String # @param Expr: 规则表达式,可参考告警规则说明 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Expr: String # @param State: 告警规则状态: # 2-启用 # 3-禁用 # 为空默认启用 # 注意:此字段可能返回 null,表示取不到有效值。 # @type State: Integer attr_accessor :RuleName, :Labels, :Annotations, :Duration, :Expr, :State def initialize(rulename=nil, labels=nil, annotations=nil, duration=nil, expr=nil, state=nil) @RuleName = rulename @Labels = labels @Annotations = annotations @Duration = duration @Expr = expr @State = state end def deserialize(params) @RuleName = params['RuleName'] unless params['Labels'].nil? @Labels = [] params['Labels'].each do |i| prometheusrulekv_tmp = PrometheusRuleKV.new prometheusrulekv_tmp.deserialize(i) @Labels << prometheusrulekv_tmp end end unless params['Annotations'].nil? @Annotations = [] params['Annotations'].each do |i| prometheusrulekv_tmp = PrometheusRuleKV.new prometheusrulekv_tmp.deserialize(i) @Annotations << prometheusrulekv_tmp end end @Duration = params['Duration'] @Expr = params['Expr'] @State = params['State'] end end # Prometheus告警规则分组信息 class PrometheusAlertGroupSet < TencentCloud::Common::AbstractModel # @param GroupId: 告警分组ID,满足正则表达式`alert-[a-z0-9]{8}` # 注意:此字段可能返回 null,表示取不到有效值。 # @type GroupId: String # @param GroupName: 告警分组名称 # 注意:此字段可能返回 null,表示取不到有效值。 # @type GroupName: String # @param AMPReceivers: 云监控告警模板ID ,返回告警模板转换后的notice ID。 # 注意:此字段可能返回 null,表示取不到有效值。 # @type AMPReceivers: Array # @param CustomReceiver: 自定义告警模板 # 注意:此字段可能返回 null,表示取不到有效值。 # @type CustomReceiver: :class:`Tencentcloud::Monitor.v20180724.models.PrometheusAlertCustomReceiver` # @param RepeatInterval: 告警通知间隔 # 注意:此字段可能返回 null,表示取不到有效值。 # @type RepeatInterval: String # @param TemplateId: 若告警分组通过模板创建,则返回模板ID # 注意:此字段可能返回 null,表示取不到有效值。 # @type TemplateId: String # @param Rules: 分组内告警规则详情 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Rules: Array # @param CreatedAt: 分组创建时间 # 注意:此字段可能返回 null,表示取不到有效值。 # @type CreatedAt: String # @param UpdatedAt: 分组更新时间 # 注意:此字段可能返回 null,表示取不到有效值。 # @type UpdatedAt: String attr_accessor :GroupId, :GroupName, :AMPReceivers, :CustomReceiver, :RepeatInterval, :TemplateId, :Rules, :CreatedAt, :UpdatedAt def initialize(groupid=nil, groupname=nil, ampreceivers=nil, customreceiver=nil, repeatinterval=nil, templateid=nil, rules=nil, createdat=nil, updatedat=nil) @GroupId = groupid @GroupName = groupname @AMPReceivers = ampreceivers @CustomReceiver = customreceiver @RepeatInterval = repeatinterval @TemplateId = templateid @Rules = rules @CreatedAt = createdat @UpdatedAt = updatedat end def deserialize(params) @GroupId = params['GroupId'] @GroupName = params['GroupName'] @AMPReceivers = params['AMPReceivers'] unless params['CustomReceiver'].nil? @CustomReceiver = PrometheusAlertCustomReceiver.new @CustomReceiver.deserialize(params['CustomReceiver']) end @RepeatInterval = params['RepeatInterval'] @TemplateId = params['TemplateId'] unless params['Rules'].nil? @Rules = [] params['Rules'].each do |i| prometheusalertgroupruleset_tmp = PrometheusAlertGroupRuleSet.new prometheusalertgroupruleset_tmp.deserialize(i) @Rules << prometheusalertgroupruleset_tmp end end @CreatedAt = params['CreatedAt'] @UpdatedAt = params['UpdatedAt'] end end # 告警渠道使用自建alertmanager的配置 class PrometheusAlertManagerConfig < TencentCloud::Common::AbstractModel # @param Url: alertmanager url # @type Url: String # @param ClusterType: alertmanager部署所在集群类型 # 注意:此字段可能返回 null,表示取不到有效值。 # @type ClusterType: String # @param ClusterId: alertmanager部署所在集群ID # 注意:此字段可能返回 null,表示取不到有效值。 # @type ClusterId: String attr_accessor :Url, :ClusterType, :ClusterId def initialize(url=nil, clustertype=nil, clusterid=nil) @Url = url @ClusterType = clustertype @ClusterId = clusterid end def deserialize(params) @Url = params['Url'] @ClusterType = params['ClusterType'] @ClusterId = params['ClusterId'] end end # 托管prometheus告警策略实例 class PrometheusAlertPolicyItem < TencentCloud::Common::AbstractModel # @param Name: 策略名称 # @type Name: String # @param Rules: 规则列表 # @type Rules: Array # @param Id: 告警策略 id # 注意:此字段可能返回 null,表示取不到有效值。 # @type Id: String # @param TemplateId: 如果该告警来自模板下发,则TemplateId为模板id # 注意:此字段可能返回 null,表示取不到有效值。 # @type TemplateId: String # @param Notification: 告警渠道,模板中使用可能返回null # 注意:此字段可能返回 null,表示取不到有效值。 # @type Notification: :class:`Tencentcloud::Monitor.v20180724.models.PrometheusNotificationItem` # @param UpdatedAt: 最后修改时间 # 注意:此字段可能返回 null,表示取不到有效值。 # @type UpdatedAt: String # @param ClusterId: 如果告警策略来源于用户集群CRD资源定义,则ClusterId为所属集群ID # 注意:此字段可能返回 null,表示取不到有效值。 # @type ClusterId: String attr_accessor :Name, :Rules, :Id, :TemplateId, :Notification, :UpdatedAt, :ClusterId def initialize(name=nil, rules=nil, id=nil, templateid=nil, notification=nil, updatedat=nil, clusterid=nil) @Name = name @Rules = rules @Id = id @TemplateId = templateid @Notification = notification @UpdatedAt = updatedat @ClusterId = clusterid end def deserialize(params) @Name = params['Name'] unless params['Rules'].nil? @Rules = [] params['Rules'].each do |i| prometheusalertrule_tmp = PrometheusAlertRule.new prometheusalertrule_tmp.deserialize(i) @Rules << prometheusalertrule_tmp end end @Id = params['Id'] @TemplateId = params['TemplateId'] unless params['Notification'].nil? @Notification = PrometheusNotificationItem.new @Notification.deserialize(params['Notification']) end @UpdatedAt = params['UpdatedAt'] @ClusterId = params['ClusterId'] end end # Prometheus告警规则 class PrometheusAlertRule < TencentCloud::Common::AbstractModel # @param Name: 规则名称 # @type Name: String # @param Rule: prometheus语句 # @type Rule: String # @param Labels: 额外标签 # @type Labels: Array # @param Template: 告警发送模板 # @type Template: String # @param For: 持续时间 # @type For: String # @param Describe: 该条规则的描述信息 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Describe: String # @param Annotations: 参考prometheus rule中的annotations # 注意:此字段可能返回 null,表示取不到有效值。 # @type Annotations: Array # @param RuleState: 告警规则状态 # 注意:此字段可能返回 null,表示取不到有效值。 # @type RuleState: Integer attr_accessor :Name, :Rule, :Labels, :Template, :For, :Describe, :Annotations, :RuleState def initialize(name=nil, rule=nil, labels=nil, template=nil, _for=nil, describe=nil, annotations=nil, rulestate=nil) @Name = name @Rule = rule @Labels = labels @Template = template @For = _for @Describe = describe @Annotations = annotations @RuleState = rulestate end def deserialize(params) @Name = params['Name'] @Rule = params['Rule'] unless params['Labels'].nil? @Labels = [] params['Labels'].each do |i| label_tmp = Label.new label_tmp.deserialize(i) @Labels << label_tmp end end @Template = params['Template'] @For = params['For'] @Describe = params['Describe'] unless params['Annotations'].nil? @Annotations = [] params['Annotations'].each do |i| label_tmp = Label.new label_tmp.deserialize(i) @Annotations << label_tmp end end @RuleState = params['RuleState'] end end # 与腾讯云可观测平台融合托管 Prometheus 实例,关联集群基础信息 class PrometheusClusterAgentBasic < TencentCloud::Common::AbstractModel # @param Region: 地域 # @type Region: String # @param ClusterType: 集群类型。可填入tke、eks、tkeedge、tdcc,分别代表标准集群、弹性集群、边缘集群、注册集群 # @type ClusterType: String # @param ClusterId: 集群ID # @type ClusterId: String # @param EnableExternal: 是否开启公网CLB # @type EnableExternal: Boolean # @param InClusterPodConfig: 集群内部署组件的pod配置 # @type InClusterPodConfig: :class:`Tencentcloud::Monitor.v20180724.models.PrometheusClusterAgentPodConfig` # @param ExternalLabels: 该集群采集的所有指标都会带上这些labels # @type ExternalLabels: Array # @param NotInstallBasicScrape: 是否安装默认采集配置 # @type NotInstallBasicScrape: Boolean # @param NotScrape: 是否采集指标,true代表drop所有指标,false代表采集默认指标 # @type NotScrape: Boolean # @param OpenDefaultRecord: 是否开启默认预聚合规则 # @type OpenDefaultRecord: Boolean attr_accessor :Region, :ClusterType, :ClusterId, :EnableExternal, :InClusterPodConfig, :ExternalLabels, :NotInstallBasicScrape, :NotScrape, :OpenDefaultRecord def initialize(region=nil, clustertype=nil, clusterid=nil, enableexternal=nil, inclusterpodconfig=nil, externallabels=nil, notinstallbasicscrape=nil, notscrape=nil, opendefaultrecord=nil) @Region = region @ClusterType = clustertype @ClusterId = clusterid @EnableExternal = enableexternal @InClusterPodConfig = inclusterpodconfig @ExternalLabels = externallabels @NotInstallBasicScrape = notinstallbasicscrape @NotScrape = notscrape @OpenDefaultRecord = opendefaultrecord end def deserialize(params) @Region = params['Region'] @ClusterType = params['ClusterType'] @ClusterId = params['ClusterId'] @EnableExternal = params['EnableExternal'] unless params['InClusterPodConfig'].nil? @InClusterPodConfig = PrometheusClusterAgentPodConfig.new @InClusterPodConfig.deserialize(params['InClusterPodConfig']) end unless params['ExternalLabels'].nil? @ExternalLabels = [] params['ExternalLabels'].each do |i| label_tmp = Label.new label_tmp.deserialize(i) @ExternalLabels << label_tmp end end @NotInstallBasicScrape = params['NotInstallBasicScrape'] @NotScrape = params['NotScrape'] @OpenDefaultRecord = params['OpenDefaultRecord'] end end # 关联集群时在集群内部署组件的pod额外配置 class PrometheusClusterAgentPodConfig < TencentCloud::Common::AbstractModel # @param HostNet: 是否使用HostNetWork # @type HostNet: Boolean # @param NodeSelector: 指定pod运行节点 # @type NodeSelector: Array # @param Tolerations: 容忍污点 # @type Tolerations: Array attr_accessor :HostNet, :NodeSelector, :Tolerations def initialize(hostnet=nil, nodeselector=nil, tolerations=nil) @HostNet = hostnet @NodeSelector = nodeselector @Tolerations = tolerations end def deserialize(params) @HostNet = params['HostNet'] unless params['NodeSelector'].nil? @NodeSelector = [] params['NodeSelector'].each do |i| label_tmp = Label.new label_tmp.deserialize(i) @NodeSelector << label_tmp end end unless params['Tolerations'].nil? @Tolerations = [] params['Tolerations'].each do |i| toleration_tmp = Toleration.new toleration_tmp.deserialize(i) @Tolerations << toleration_tmp end end end end # prometheus配置 class PrometheusConfigItem < TencentCloud::Common::AbstractModel # @param Name: 名称 # @type Name: String # @param Config: 配置内容 # @type Config: String # @param TemplateId: 用于出参,如果该配置来至模板,则为模板id # 注意:此字段可能返回 null,表示取不到有效值。 # @type TemplateId: String # @param Targets: 目标数 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Targets: :class:`Tencentcloud::Monitor.v20180724.models.Targets` attr_accessor :Name, :Config, :TemplateId, :Targets def initialize(name=nil, config=nil, templateid=nil, targets=nil) @Name = name @Config = config @TemplateId = templateid @Targets = targets end def deserialize(params) @Name = params['Name'] @Config = params['Config'] @TemplateId = params['TemplateId'] unless params['Targets'].nil? @Targets = Targets.new @Targets.deserialize(params['Targets']) end end end # 实例的授权信息 class PrometheusInstanceGrantInfo < TencentCloud::Common::AbstractModel # @param HasChargeOperation: 是否有计费操作权限(1=有,2=无) # @type HasChargeOperation: Integer # @param HasVpcDisplay: 是否显示VPC信息的权限(1=有,2=无) # @type HasVpcDisplay: Integer # @param HasGrafanaStatusChange: 是否可修改Grafana的状态(1=有,2=无) # @type HasGrafanaStatusChange: Integer # @param HasAgentManage: 是否有管理agent的权限(1=有,2=无) # @type HasAgentManage: Integer # @param HasTkeManage: 是否有管理TKE集成的权限(1=有,2=无) # @type HasTkeManage: Integer # @param HasApiOperation: 是否显示API等信息(1=有, 2=无) # @type HasApiOperation: Integer attr_accessor :HasChargeOperation, :HasVpcDisplay, :HasGrafanaStatusChange, :HasAgentManage, :HasTkeManage, :HasApiOperation def initialize(haschargeoperation=nil, hasvpcdisplay=nil, hasgrafanastatuschange=nil, hasagentmanage=nil, hastkemanage=nil, hasapioperation=nil) @HasChargeOperation = haschargeoperation @HasVpcDisplay = hasvpcdisplay @HasGrafanaStatusChange = hasgrafanastatuschange @HasAgentManage = hasagentmanage @HasTkeManage = hastkemanage @HasApiOperation = hasapioperation end def deserialize(params) @HasChargeOperation = params['HasChargeOperation'] @HasVpcDisplay = params['HasVpcDisplay'] @HasGrafanaStatusChange = params['HasGrafanaStatusChange'] @HasAgentManage = params['HasAgentManage'] @HasTkeManage = params['HasTkeManage'] @HasApiOperation = params['HasApiOperation'] end end # Prometheus用量信息 class PrometheusInstanceTenantUsage < TencentCloud::Common::AbstractModel # @param InstanceId: 实例ID # 注意:此字段可能返回 null,表示取不到有效值。 # @type InstanceId: String # @param CalcDate: 计费周期 # 注意:此字段可能返回 null,表示取不到有效值。 # @type CalcDate: String # @param Total: 总用量 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Total: Float # @param Basic: 基础指标用量 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Basic: Float # @param Fee: 付费指标用量 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Fee: Float attr_accessor :InstanceId, :CalcDate, :Total, :Basic, :Fee def initialize(instanceid=nil, calcdate=nil, total=nil, basic=nil, fee=nil) @InstanceId = instanceid @CalcDate = calcdate @Total = total @Basic = basic @Fee = fee end def deserialize(params) @InstanceId = params['InstanceId'] @CalcDate = params['CalcDate'] @Total = params['Total'] @Basic = params['Basic'] @Fee = params['Fee'] end end # Prometheus 服务响应体 class PrometheusInstancesItem < TencentCloud::Common::AbstractModel # @param InstanceId: 实例ID。 # @type InstanceId: String # @param InstanceName: 实例名称。 # @type InstanceName: String # @param InstanceChargeType: 实例计费模式。取值范围: # # @type InstanceChargeType: Integer # @param RegionId: 地域 ID # @type RegionId: Integer # @param Zone: 可用区 # @type Zone: String # @param VpcId: VPC ID # @type VpcId: String # @param SubnetId: 子网 ID # @type SubnetId: String # @param DataRetentionTime: 存储周期 # 注意:此字段可能返回 null,表示取不到有效值。 # @type DataRetentionTime: Integer # @param InstanceStatus: 实例业务状态。取值范围: # # @type InstanceStatus: Integer # @param GrafanaURL: Grafana 面板 URL # 注意:此字段可能返回 null,表示取不到有效值。 # @type GrafanaURL: String # @param CreatedAt: 创建时间 # @type CreatedAt: String # @param EnableGrafana: 是否开启 Grafana #
  • 0:不开启
  • #
  • 1:开启
  • # @type EnableGrafana: Integer # @param IPv4Address: 实例IPV4地址 # 注意:此字段可能返回 null,表示取不到有效值。 # @type IPv4Address: String # @param TagSpecification: 实例关联的标签列表。 # 注意:此字段可能返回 null,表示取不到有效值。 # @type TagSpecification: Array # @param ExpireTime: 购买的实例过期时间 # 注意:此字段可能返回 null,表示取不到有效值。 # @type ExpireTime: String # @param ChargeStatus: 计费状态 # # 注意:此字段可能返回 null,表示取不到有效值。 # @type ChargeStatus: Integer # @param SpecName: 规格名称 # 注意:此字段可能返回 null,表示取不到有效值。 # @type SpecName: String # @param AutoRenewFlag: 自动续费标记 # # 注意:此字段可能返回 null,表示取不到有效值。 # @type AutoRenewFlag: Integer # @param IsNearExpire: 是否快过期 # # 注意:此字段可能返回 null,表示取不到有效值。 # @type IsNearExpire: Integer # @param AuthToken: 数据写入需要的 Token # 注意:此字段可能返回 null,表示取不到有效值。 # @type AuthToken: String # @param RemoteWrite: Prometheus Remote Write 的地址 # 注意:此字段可能返回 null,表示取不到有效值。 # @type RemoteWrite: String # @param ApiRootPath: Prometheus HTTP Api 根地址 # 注意:此字段可能返回 null,表示取不到有效值。 # @type ApiRootPath: String # @param ProxyAddress: Proxy 的地址 # 注意:此字段可能返回 null,表示取不到有效值。 # @type ProxyAddress: String # @param GrafanaStatus: Grafana 运行状态 # # 注意:此字段可能返回 null,表示取不到有效值。 # @type GrafanaStatus: Integer # @param GrafanaIpWhiteList: Grafana IP 白名单列表,使用英文分号分隔 # 注意:此字段可能返回 null,表示取不到有效值。 # @type GrafanaIpWhiteList: String # @param Grant: 实例的授权信息 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Grant: :class:`Tencentcloud::Monitor.v20180724.models.PrometheusInstanceGrantInfo` # @param GrafanaInstanceId: 绑定的 Grafana 实例 ID # 注意:此字段可能返回 null,表示取不到有效值。 # @type GrafanaInstanceId: String # @param AlertRuleLimit: 告警规则限制 # 注意:此字段可能返回 null,表示取不到有效值。 # @type AlertRuleLimit: Integer # @param RecordingRuleLimit: 预聚合规则限制 # 注意:此字段可能返回 null,表示取不到有效值。 # @type RecordingRuleLimit: Integer # @param MigrationType: 迁移状态,0-不在迁移中,1-迁移中、原实例,2-迁移中、目标实例 # 注意:此字段可能返回 null,表示取不到有效值。 # @type MigrationType: Integer attr_accessor :InstanceId, :InstanceName, :InstanceChargeType, :RegionId, :Zone, :VpcId, :SubnetId, :DataRetentionTime, :InstanceStatus, :GrafanaURL, :CreatedAt, :EnableGrafana, :IPv4Address, :TagSpecification, :ExpireTime, :ChargeStatus, :SpecName, :AutoRenewFlag, :IsNearExpire, :AuthToken, :RemoteWrite, :ApiRootPath, :ProxyAddress, :GrafanaStatus, :GrafanaIpWhiteList, :Grant, :GrafanaInstanceId, :AlertRuleLimit, :RecordingRuleLimit, :MigrationType def initialize(instanceid=nil, instancename=nil, instancechargetype=nil, regionid=nil, zone=nil, vpcid=nil, subnetid=nil, dataretentiontime=nil, instancestatus=nil, grafanaurl=nil, createdat=nil, enablegrafana=nil, ipv4address=nil, tagspecification=nil, expiretime=nil, chargestatus=nil, specname=nil, autorenewflag=nil, isnearexpire=nil, authtoken=nil, remotewrite=nil, apirootpath=nil, proxyaddress=nil, grafanastatus=nil, grafanaipwhitelist=nil, grant=nil, grafanainstanceid=nil, alertrulelimit=nil, recordingrulelimit=nil, migrationtype=nil) @InstanceId = instanceid @InstanceName = instancename @InstanceChargeType = instancechargetype @RegionId = regionid @Zone = zone @VpcId = vpcid @SubnetId = subnetid @DataRetentionTime = dataretentiontime @InstanceStatus = instancestatus @GrafanaURL = grafanaurl @CreatedAt = createdat @EnableGrafana = enablegrafana @IPv4Address = ipv4address @TagSpecification = tagspecification @ExpireTime = expiretime @ChargeStatus = chargestatus @SpecName = specname @AutoRenewFlag = autorenewflag @IsNearExpire = isnearexpire @AuthToken = authtoken @RemoteWrite = remotewrite @ApiRootPath = apirootpath @ProxyAddress = proxyaddress @GrafanaStatus = grafanastatus @GrafanaIpWhiteList = grafanaipwhitelist @Grant = grant @GrafanaInstanceId = grafanainstanceid @AlertRuleLimit = alertrulelimit @RecordingRuleLimit = recordingrulelimit @MigrationType = migrationtype end def deserialize(params) @InstanceId = params['InstanceId'] @InstanceName = params['InstanceName'] @InstanceChargeType = params['InstanceChargeType'] @RegionId = params['RegionId'] @Zone = params['Zone'] @VpcId = params['VpcId'] @SubnetId = params['SubnetId'] @DataRetentionTime = params['DataRetentionTime'] @InstanceStatus = params['InstanceStatus'] @GrafanaURL = params['GrafanaURL'] @CreatedAt = params['CreatedAt'] @EnableGrafana = params['EnableGrafana'] @IPv4Address = params['IPv4Address'] unless params['TagSpecification'].nil? @TagSpecification = [] params['TagSpecification'].each do |i| prometheustag_tmp = PrometheusTag.new prometheustag_tmp.deserialize(i) @TagSpecification << prometheustag_tmp end end @ExpireTime = params['ExpireTime'] @ChargeStatus = params['ChargeStatus'] @SpecName = params['SpecName'] @AutoRenewFlag = params['AutoRenewFlag'] @IsNearExpire = params['IsNearExpire'] @AuthToken = params['AuthToken'] @RemoteWrite = params['RemoteWrite'] @ApiRootPath = params['ApiRootPath'] @ProxyAddress = params['ProxyAddress'] @GrafanaStatus = params['GrafanaStatus'] @GrafanaIpWhiteList = params['GrafanaIpWhiteList'] unless params['Grant'].nil? @Grant = PrometheusInstanceGrantInfo.new @Grant.deserialize(params['Grant']) end @GrafanaInstanceId = params['GrafanaInstanceId'] @AlertRuleLimit = params['AlertRuleLimit'] @RecordingRuleLimit = params['RecordingRuleLimit'] @MigrationType = params['MigrationType'] end end # 托管prometheusV2实例概览 class PrometheusInstancesOverview < TencentCloud::Common::AbstractModel # @param InstanceId: 实例ID # @type InstanceId: String # @param InstanceName: 实例名 # @type InstanceName: String # @param VpcId: VPC ID # @type VpcId: String # @param SubnetId: 子网ID # @type SubnetId: String # @param InstanceStatus: 运行状态(1:正在创建;2:运行中;3:异常;4:重启中;5:销毁中; 6:已停机; 7: 已删除) # @type InstanceStatus: Integer # @param ChargeStatus: 计费状态(1:正常;2:过期; 3:销毁; 4:分配中; 5:分配失败) # 注意:此字段可能返回 null,表示取不到有效值。 # @type ChargeStatus: Integer # @param EnableGrafana: 是否开启 Grafana(0:不开启,1:开启) # @type EnableGrafana: Integer # @param GrafanaURL: Grafana 面板 URL # 注意:此字段可能返回 null,表示取不到有效值。 # @type GrafanaURL: String # @param InstanceChargeType: 实例付费类型(1:试用版;2:预付费) # @type InstanceChargeType: Integer # @param SpecName: 规格名称 # 注意:此字段可能返回 null,表示取不到有效值。 # @type SpecName: String # @param DataRetentionTime: 存储周期 # 注意:此字段可能返回 null,表示取不到有效值。 # @type DataRetentionTime: Integer # @param ExpireTime: 购买的实例过期时间 # 注意:此字段可能返回 null,表示取不到有效值。 # @type ExpireTime: String # @param AutoRenewFlag: 自动续费标记(0:不自动续费;1:开启自动续费;2:禁止自动续费;-1:无效) # 注意:此字段可能返回 null,表示取不到有效值。 # @type AutoRenewFlag: Integer # @param BoundTotal: 绑定集群总数 # @type BoundTotal: Integer # @param BoundNormal: 绑定集群正常状态总数 # @type BoundNormal: Integer # @param ResourcePackageStatus: 资源包状态,0-无可用资源包,1-有可用资源包 # 注意:此字段可能返回 null,表示取不到有效值。 # @type ResourcePackageStatus: Integer # @param ResourcePackageSpecName: 资源包规格名称 # 注意:此字段可能返回 null,表示取不到有效值。 # @type ResourcePackageSpecName: String attr_accessor :InstanceId, :InstanceName, :VpcId, :SubnetId, :InstanceStatus, :ChargeStatus, :EnableGrafana, :GrafanaURL, :InstanceChargeType, :SpecName, :DataRetentionTime, :ExpireTime, :AutoRenewFlag, :BoundTotal, :BoundNormal, :ResourcePackageStatus, :ResourcePackageSpecName def initialize(instanceid=nil, instancename=nil, vpcid=nil, subnetid=nil, instancestatus=nil, chargestatus=nil, enablegrafana=nil, grafanaurl=nil, instancechargetype=nil, specname=nil, dataretentiontime=nil, expiretime=nil, autorenewflag=nil, boundtotal=nil, boundnormal=nil, resourcepackagestatus=nil, resourcepackagespecname=nil) @InstanceId = instanceid @InstanceName = instancename @VpcId = vpcid @SubnetId = subnetid @InstanceStatus = instancestatus @ChargeStatus = chargestatus @EnableGrafana = enablegrafana @GrafanaURL = grafanaurl @InstanceChargeType = instancechargetype @SpecName = specname @DataRetentionTime = dataretentiontime @ExpireTime = expiretime @AutoRenewFlag = autorenewflag @BoundTotal = boundtotal @BoundNormal = boundnormal @ResourcePackageStatus = resourcepackagestatus @ResourcePackageSpecName = resourcepackagespecname end def deserialize(params) @InstanceId = params['InstanceId'] @InstanceName = params['InstanceName'] @VpcId = params['VpcId'] @SubnetId = params['SubnetId'] @InstanceStatus = params['InstanceStatus'] @ChargeStatus = params['ChargeStatus'] @EnableGrafana = params['EnableGrafana'] @GrafanaURL = params['GrafanaURL'] @InstanceChargeType = params['InstanceChargeType'] @SpecName = params['SpecName'] @DataRetentionTime = params['DataRetentionTime'] @ExpireTime = params['ExpireTime'] @AutoRenewFlag = params['AutoRenewFlag'] @BoundTotal = params['BoundTotal'] @BoundNormal = params['BoundNormal'] @ResourcePackageStatus = params['ResourcePackageStatus'] @ResourcePackageSpecName = params['ResourcePackageSpecName'] end end # prometheus一个job的targets class PrometheusJobTargets < TencentCloud::Common::AbstractModel # @param Targets: 该Job的targets列表 # @type Targets: Array # @param JobName: job的名称 # @type JobName: String # @param Total: targets总数 # @type Total: Integer # @param Up: 健康的target总数 # @type Up: Integer attr_accessor :Targets, :JobName, :Total, :Up def initialize(targets=nil, jobname=nil, total=nil, up=nil) @Targets = targets @JobName = jobname @Total = total @Up = up end def deserialize(params) unless params['Targets'].nil? @Targets = [] params['Targets'].each do |i| prometheustarget_tmp = PrometheusTarget.new prometheustarget_tmp.deserialize(i) @Targets << prometheustarget_tmp end end @JobName = params['JobName'] @Total = params['Total'] @Up = params['Up'] end end # 告警通知渠道配置 class PrometheusNotificationItem < TencentCloud::Common::AbstractModel # @param Enabled: 是否启用 # @type Enabled: Boolean # @param Type: 通道类型,默认为amp,支持以下 # amp # webhook # alertmanager # @type Type: String # @param WebHook: 如果Type为webhook, 则该字段为必填项 # 注意:此字段可能返回 null,表示取不到有效值。 # @type WebHook: String # @param AlertManager: 如果Type为alertmanager, 则该字段为必填项 # 注意:此字段可能返回 null,表示取不到有效值。 # @type AlertManager: :class:`Tencentcloud::Monitor.v20180724.models.PrometheusAlertManagerConfig` # @param RepeatInterval: 收敛时间 # @type RepeatInterval: String # @param TimeRangeStart: 生效起始时间 # @type TimeRangeStart: String # @param TimeRangeEnd: 生效结束时间 # @type TimeRangeEnd: String # @param NotifyWay: 告警通知方式。目前有SMS、EMAIL、CALL、WECHAT方式。 # 注意:此字段可能返回 null,表示取不到有效值。 # @type NotifyWay: Array # @param ReceiverGroups: 告警接收组(用户组) # 注意:此字段可能返回 null,表示取不到有效值。 # @type ReceiverGroups: Array # @param PhoneNotifyOrder: 电话告警顺序。 # 注:NotifyWay选择CALL,采用该参数。 # 注意:此字段可能返回 null,表示取不到有效值。 # @type PhoneNotifyOrder: Array # @param PhoneCircleTimes: 电话告警次数。 # 注:NotifyWay选择CALL,采用该参数。 # 注意:此字段可能返回 null,表示取不到有效值。 # @type PhoneCircleTimes: Integer # @param PhoneInnerInterval: 电话告警轮内间隔。单位:秒 # 注:NotifyWay选择CALL,采用该参数。 # 注意:此字段可能返回 null,表示取不到有效值。 # @type PhoneInnerInterval: Integer # @param PhoneCircleInterval: 电话告警轮外间隔。单位:秒 # 注:NotifyWay选择CALL,采用该参数。 # 注意:此字段可能返回 null,表示取不到有效值。 # @type PhoneCircleInterval: Integer # @param PhoneArriveNotice: 电话告警触达通知 # 注:NotifyWay选择CALL,采用该参数。 # 注意:此字段可能返回 null,表示取不到有效值。 # @type PhoneArriveNotice: Boolean attr_accessor :Enabled, :Type, :WebHook, :AlertManager, :RepeatInterval, :TimeRangeStart, :TimeRangeEnd, :NotifyWay, :ReceiverGroups, :PhoneNotifyOrder, :PhoneCircleTimes, :PhoneInnerInterval, :PhoneCircleInterval, :PhoneArriveNotice def initialize(enabled=nil, type=nil, webhook=nil, alertmanager=nil, repeatinterval=nil, timerangestart=nil, timerangeend=nil, notifyway=nil, receivergroups=nil, phonenotifyorder=nil, phonecircletimes=nil, phoneinnerinterval=nil, phonecircleinterval=nil, phonearrivenotice=nil) @Enabled = enabled @Type = type @WebHook = webhook @AlertManager = alertmanager @RepeatInterval = repeatinterval @TimeRangeStart = timerangestart @TimeRangeEnd = timerangeend @NotifyWay = notifyway @ReceiverGroups = receivergroups @PhoneNotifyOrder = phonenotifyorder @PhoneCircleTimes = phonecircletimes @PhoneInnerInterval = phoneinnerinterval @PhoneCircleInterval = phonecircleinterval @PhoneArriveNotice = phonearrivenotice end def deserialize(params) @Enabled = params['Enabled'] @Type = params['Type'] @WebHook = params['WebHook'] unless params['AlertManager'].nil? @AlertManager = PrometheusAlertManagerConfig.new @AlertManager.deserialize(params['AlertManager']) end @RepeatInterval = params['RepeatInterval'] @TimeRangeStart = params['TimeRangeStart'] @TimeRangeEnd = params['TimeRangeEnd'] @NotifyWay = params['NotifyWay'] @ReceiverGroups = params['ReceiverGroups'] @PhoneNotifyOrder = params['PhoneNotifyOrder'] @PhoneCircleTimes = params['PhoneCircleTimes'] @PhoneInnerInterval = params['PhoneInnerInterval'] @PhoneCircleInterval = params['PhoneCircleInterval'] @PhoneArriveNotice = params['PhoneArriveNotice'] end end # prometheus聚合规则实例详情,包含所属集群ID class PrometheusRecordRuleYamlItem < TencentCloud::Common::AbstractModel # @param Name: 实例名称 # @type Name: String # @param UpdateTime: 最近更新时间 # @type UpdateTime: String # @param TemplateId: Yaml内容 # @type TemplateId: String # @param Content: 如果该聚合规则来至模板,则TemplateId为模板id # 注意:此字段可能返回 null,表示取不到有效值。 # @type Content: String # @param ClusterId: 该聚合规则如果来源于用户集群crd资源定义,则ClusterId为所属集群ID # 注意:此字段可能返回 null,表示取不到有效值。 # @type ClusterId: String # @param Status: 状态 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Status: Integer # @param Id: id # 注意:此字段可能返回 null,表示取不到有效值。 # @type Id: String # @param Count: 规则数量 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Count: Integer attr_accessor :Name, :UpdateTime, :TemplateId, :Content, :ClusterId, :Status, :Id, :Count def initialize(name=nil, updatetime=nil, templateid=nil, content=nil, clusterid=nil, status=nil, id=nil, count=nil) @Name = name @UpdateTime = updatetime @TemplateId = templateid @Content = content @ClusterId = clusterid @Status = status @Id = id @Count = count end def deserialize(params) @Name = params['Name'] @UpdateTime = params['UpdateTime'] @TemplateId = params['TemplateId'] @Content = params['Content'] @ClusterId = params['ClusterId'] @Status = params['Status'] @Id = params['Id'] @Count = params['Count'] end end # DescribePrometheusRegions 响应结构体 class PrometheusRegionItem < TencentCloud::Common::AbstractModel # @param Region: 区域 # @type Region: String # @param RegionId: 区域 ID # @type RegionId: Integer # @param RegionState: 区域状态( 0: 不可用;1: 可用) # @type RegionState: Integer # @param RegionName: 区域名(中文) # @type RegionName: String # @param RegionShortName: 区域名(英文缩写) # @type RegionShortName: String # @param Area: 区域所在大区名 # @type Area: String # @param RegionPayMode: 1-仅支持预付费,2-仅支持后付费,3-支持两种计费模式实例 # @type RegionPayMode: Integer attr_accessor :Region, :RegionId, :RegionState, :RegionName, :RegionShortName, :Area, :RegionPayMode def initialize(region=nil, regionid=nil, regionstate=nil, regionname=nil, regionshortname=nil, area=nil, regionpaymode=nil) @Region = region @RegionId = regionid @RegionState = regionstate @RegionName = regionname @RegionShortName = regionshortname @Area = area @RegionPayMode = regionpaymode end def deserialize(params) @Region = params['Region'] @RegionId = params['RegionId'] @RegionState = params['RegionState'] @RegionName = params['RegionName'] @RegionShortName = params['RegionShortName'] @Area = params['Area'] @RegionPayMode = params['RegionPayMode'] end end # prometheus 报警规则 KV 参数 class PrometheusRuleKV < TencentCloud::Common::AbstractModel # @param Key: 键 # @type Key: String # @param Value: 值 # @type Value: String attr_accessor :Key, :Value def initialize(key=nil, value=nil) @Key = key @Value = value end def deserialize(params) @Key = params['Key'] @Value = params['Value'] end end # prometheus 报警规则集 class PrometheusRuleSet < TencentCloud::Common::AbstractModel # @param RuleId: 规则 ID # @type RuleId: String # @param RuleName: 规则名称 # @type RuleName: String # @param RuleState: 规则状态码 # @type RuleState: Integer # @param Type: 规则类别 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Type: String # @param Labels: 规则标签列表 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Labels: Array # @param Annotations: 规则注释列表 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Annotations: Array # @param Expr: 规则表达式 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Expr: String # @param Duration: 规则报警持续时间 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Duration: String # @param Receivers: 报警接收组列表 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Receivers: Array # @param Health: 规则运行健康状态,取值如下: #
  • unknown 未知状态
  • #
  • pending 加载中
  • #
  • ok 运行正常
  • #
  • err 运行错误
  • # @type Health: String # @param CreatedAt: 规则创建时间 # 注意:此字段可能返回 null,表示取不到有效值。 # @type CreatedAt: String # @param UpdatedAt: 规则更新时间 # 注意:此字段可能返回 null,表示取不到有效值。 # @type UpdatedAt: String attr_accessor :RuleId, :RuleName, :RuleState, :Type, :Labels, :Annotations, :Expr, :Duration, :Receivers, :Health, :CreatedAt, :UpdatedAt def initialize(ruleid=nil, rulename=nil, rulestate=nil, type=nil, labels=nil, annotations=nil, expr=nil, duration=nil, receivers=nil, health=nil, createdat=nil, updatedat=nil) @RuleId = ruleid @RuleName = rulename @RuleState = rulestate @Type = type @Labels = labels @Annotations = annotations @Expr = expr @Duration = duration @Receivers = receivers @Health = health @CreatedAt = createdat @UpdatedAt = updatedat end def deserialize(params) @RuleId = params['RuleId'] @RuleName = params['RuleName'] @RuleState = params['RuleState'] @Type = params['Type'] unless params['Labels'].nil? @Labels = [] params['Labels'].each do |i| prometheusrulekv_tmp = PrometheusRuleKV.new prometheusrulekv_tmp.deserialize(i) @Labels << prometheusrulekv_tmp end end unless params['Annotations'].nil? @Annotations = [] params['Annotations'].each do |i| prometheusrulekv_tmp = PrometheusRuleKV.new prometheusrulekv_tmp.deserialize(i) @Annotations << prometheusrulekv_tmp end end @Expr = params['Expr'] @Duration = params['Duration'] @Receivers = params['Receivers'] @Health = params['Health'] @CreatedAt = params['CreatedAt'] @UpdatedAt = params['UpdatedAt'] end end # Prometheus 抓取任务 class PrometheusScrapeJob < TencentCloud::Common::AbstractModel # @param Name: 任务名 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Name: String # @param AgentId: Agent ID # @type AgentId: String # @param JobId: 任务 ID # @type JobId: String # @param Config: 配置 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Config: String attr_accessor :Name, :AgentId, :JobId, :Config def initialize(name=nil, agentid=nil, jobid=nil, config=nil) @Name = name @AgentId = agentid @JobId = jobid @Config = config end def deserialize(params) @Name = params['Name'] @AgentId = params['AgentId'] @JobId = params['JobId'] @Config = params['Config'] end end # Prometheus 托管服务标签 class PrometheusTag < TencentCloud::Common::AbstractModel # @param Key: 标签的健值 # @type Key: String # @param Value: 标签对应的值 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Value: String attr_accessor :Key, :Value def initialize(key=nil, value=nil) @Key = key @Value = value end def deserialize(params) @Key = params['Key'] @Value = params['Value'] end end # prometheus一个抓取目标的信息 class PrometheusTarget < TencentCloud::Common::AbstractModel def initialize() end def deserialize(params) end end # 模板实例 class PrometheusTemp < TencentCloud::Common::AbstractModel # @param Name: 模板名称 # @type Name: String # @param Level: 模板维度,支持以下类型 # instance 实例级别 # cluster 集群级别 # @type Level: String # @param Describe: 模板描述 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Describe: String # @param RecordRules: 当Level为instance时有效, # 模板中的聚合规则列表 # 注意:此字段可能返回 null,表示取不到有效值。 # @type RecordRules: Array # @param ServiceMonitors: 当Level为cluster时有效, # 模板中的ServiceMonitor规则列表 # 注意:此字段可能返回 null,表示取不到有效值。 # @type ServiceMonitors: Array # @param PodMonitors: 当Level为cluster时有效, # 模板中的PodMonitors规则列表 # 注意:此字段可能返回 null,表示取不到有效值。 # @type PodMonitors: Array # @param RawJobs: 当Level为cluster时有效, # 模板中的RawJobs规则列表 # 注意:此字段可能返回 null,表示取不到有效值。 # @type RawJobs: Array # @param TemplateId: 模板的ID, 用于出参 # 注意:此字段可能返回 null,表示取不到有效值。 # @type TemplateId: String # @param UpdateTime: 最近更新时间,用于出参 # 注意:此字段可能返回 null,表示取不到有效值。 # @type UpdateTime: String # @param Version: 当前版本,用于出参 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Version: String # @param IsDefault: 是否系统提供的默认模板,用于出参 # 注意:此字段可能返回 null,表示取不到有效值。 # @type IsDefault: Boolean # @param AlertDetailRules: 当Level为instance时有效, # 模板中的告警配置列表 # 注意:此字段可能返回 null,表示取不到有效值。 # @type AlertDetailRules: Array # @param TargetsTotal: 关联实例数目 # 注意:此字段可能返回 null,表示取不到有效值。 # @type TargetsTotal: Integer attr_accessor :Name, :Level, :Describe, :RecordRules, :ServiceMonitors, :PodMonitors, :RawJobs, :TemplateId, :UpdateTime, :Version, :IsDefault, :AlertDetailRules, :TargetsTotal def initialize(name=nil, level=nil, describe=nil, recordrules=nil, servicemonitors=nil, podmonitors=nil, rawjobs=nil, templateid=nil, updatetime=nil, version=nil, isdefault=nil, alertdetailrules=nil, targetstotal=nil) @Name = name @Level = level @Describe = describe @RecordRules = recordrules @ServiceMonitors = servicemonitors @PodMonitors = podmonitors @RawJobs = rawjobs @TemplateId = templateid @UpdateTime = updatetime @Version = version @IsDefault = isdefault @AlertDetailRules = alertdetailrules @TargetsTotal = targetstotal end def deserialize(params) @Name = params['Name'] @Level = params['Level'] @Describe = params['Describe'] unless params['RecordRules'].nil? @RecordRules = [] params['RecordRules'].each do |i| prometheusconfigitem_tmp = PrometheusConfigItem.new prometheusconfigitem_tmp.deserialize(i) @RecordRules << prometheusconfigitem_tmp end end unless params['ServiceMonitors'].nil? @ServiceMonitors = [] params['ServiceMonitors'].each do |i| prometheusconfigitem_tmp = PrometheusConfigItem.new prometheusconfigitem_tmp.deserialize(i) @ServiceMonitors << prometheusconfigitem_tmp end end unless params['PodMonitors'].nil? @PodMonitors = [] params['PodMonitors'].each do |i| prometheusconfigitem_tmp = PrometheusConfigItem.new prometheusconfigitem_tmp.deserialize(i) @PodMonitors << prometheusconfigitem_tmp end end unless params['RawJobs'].nil? @RawJobs = [] params['RawJobs'].each do |i| prometheusconfigitem_tmp = PrometheusConfigItem.new prometheusconfigitem_tmp.deserialize(i) @RawJobs << prometheusconfigitem_tmp end end @TemplateId = params['TemplateId'] @UpdateTime = params['UpdateTime'] @Version = params['Version'] @IsDefault = params['IsDefault'] unless params['AlertDetailRules'].nil? @AlertDetailRules = [] params['AlertDetailRules'].each do |i| prometheusalertpolicyitem_tmp = PrometheusAlertPolicyItem.new prometheusalertpolicyitem_tmp.deserialize(i) @AlertDetailRules << prometheusalertpolicyitem_tmp end end @TargetsTotal = params['TargetsTotal'] end end # 云原生Prometheus模板可修改项 class PrometheusTempModify < TencentCloud::Common::AbstractModel # @param Name: 修改名称 # @type Name: String # @param Describe: 修改描述 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Describe: String # @param ServiceMonitors: 当Level为cluster时有效, # 模板中的ServiceMonitor规则列表 # 注意:此字段可能返回 null,表示取不到有效值。 # @type ServiceMonitors: Array # @param PodMonitors: 当Level为cluster时有效, # 模板中的PodMonitors规则列表 # 注意:此字段可能返回 null,表示取不到有效值。 # @type PodMonitors: Array # @param RawJobs: 当Level为cluster时有效, # 模板中的RawJobs规则列表 # 注意:此字段可能返回 null,表示取不到有效值。 # @type RawJobs: Array # @param RecordRules: 当Level为instance时有效, # 模板中的聚合规则列表 # 注意:此字段可能返回 null,表示取不到有效值。 # @type RecordRules: Array # @param AlertDetailRules: 修改内容,只有当模板类型是Alert时生效 # 注意:此字段可能返回 null,表示取不到有效值。 # @type AlertDetailRules: Array attr_accessor :Name, :Describe, :ServiceMonitors, :PodMonitors, :RawJobs, :RecordRules, :AlertDetailRules def initialize(name=nil, describe=nil, servicemonitors=nil, podmonitors=nil, rawjobs=nil, recordrules=nil, alertdetailrules=nil) @Name = name @Describe = describe @ServiceMonitors = servicemonitors @PodMonitors = podmonitors @RawJobs = rawjobs @RecordRules = recordrules @AlertDetailRules = alertdetailrules end def deserialize(params) @Name = params['Name'] @Describe = params['Describe'] unless params['ServiceMonitors'].nil? @ServiceMonitors = [] params['ServiceMonitors'].each do |i| prometheusconfigitem_tmp = PrometheusConfigItem.new prometheusconfigitem_tmp.deserialize(i) @ServiceMonitors << prometheusconfigitem_tmp end end unless params['PodMonitors'].nil? @PodMonitors = [] params['PodMonitors'].each do |i| prometheusconfigitem_tmp = PrometheusConfigItem.new prometheusconfigitem_tmp.deserialize(i) @PodMonitors << prometheusconfigitem_tmp end end unless params['RawJobs'].nil? @RawJobs = [] params['RawJobs'].each do |i| prometheusconfigitem_tmp = PrometheusConfigItem.new prometheusconfigitem_tmp.deserialize(i) @RawJobs << prometheusconfigitem_tmp end end unless params['RecordRules'].nil? @RecordRules = [] params['RecordRules'].each do |i| prometheusconfigitem_tmp = PrometheusConfigItem.new prometheusconfigitem_tmp.deserialize(i) @RecordRules << prometheusconfigitem_tmp end end unless params['AlertDetailRules'].nil? @AlertDetailRules = [] params['AlertDetailRules'].each do |i| prometheusalertpolicyitem_tmp = PrometheusAlertPolicyItem.new prometheusalertpolicyitem_tmp.deserialize(i) @AlertDetailRules << prometheusalertpolicyitem_tmp end end end end # 云原生Prometheus模板同步目标 class PrometheusTemplateSyncTarget < TencentCloud::Common::AbstractModel # @param Region: 目标所在地域 # @type Region: String # @param InstanceId: 目标实例 # @type InstanceId: String # @param ClusterId: 集群id,只有当采集模板的Level为cluster的时候需要 # 注意:此字段可能返回 null,表示取不到有效值。 # @type ClusterId: String # @param SyncTime: 最后一次同步时间, 用于出参 # 注意:此字段可能返回 null,表示取不到有效值。 # @type SyncTime: String # @param Version: 当前使用的模板版本,用于出参 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Version: String # @param ClusterType: 集群类型,只有当采集模板的Level为cluster的时候需要 # 注意:此字段可能返回 null,表示取不到有效值。 # @type ClusterType: String # @param InstanceName: 用于出参,实例名称 # 注意:此字段可能返回 null,表示取不到有效值。 # @type InstanceName: String # @param ClusterName: 用于出参,集群名称 # 注意:此字段可能返回 null,表示取不到有效值。 # @type ClusterName: String attr_accessor :Region, :InstanceId, :ClusterId, :SyncTime, :Version, :ClusterType, :InstanceName, :ClusterName def initialize(region=nil, instanceid=nil, clusterid=nil, synctime=nil, version=nil, clustertype=nil, instancename=nil, clustername=nil) @Region = region @InstanceId = instanceid @ClusterId = clusterid @SyncTime = synctime @Version = version @ClusterType = clustertype @InstanceName = instancename @ClusterName = clustername end def deserialize(params) @Region = params['Region'] @InstanceId = params['InstanceId'] @ClusterId = params['ClusterId'] @SyncTime = params['SyncTime'] @Version = params['Version'] @ClusterType = params['ClusterType'] @InstanceName = params['InstanceName'] @ClusterName = params['ClusterName'] end end # PrometheusZoneItem 响应结构体内的地域信息 class PrometheusZoneItem < TencentCloud::Common::AbstractModel # @param Zone: 可用区 # @type Zone: String # @param ZoneId: 可用区 ID # @type ZoneId: Integer # @param ZoneState: 可用区状态( 0: 不可用;1: 可用) # @type ZoneState: Integer # @param RegionId: 地域 ID # @type RegionId: Integer # @param ZoneName: 可用区名(目前为中文) # @type ZoneName: String # @param ZoneResourceState: 可用区资源状态(0:资源不足,不可使用;1:资源足够) # 注意:此字段可能返回 null,表示取不到有效值。 # @type ZoneResourceState: Integer attr_accessor :Zone, :ZoneId, :ZoneState, :RegionId, :ZoneName, :ZoneResourceState def initialize(zone=nil, zoneid=nil, zonestate=nil, regionid=nil, zonename=nil, zoneresourcestate=nil) @Zone = zone @ZoneId = zoneid @ZoneState = zonestate @RegionId = regionid @ZoneName = zonename @ZoneResourceState = zoneresourcestate end def deserialize(params) @Zone = params['Zone'] @ZoneId = params['ZoneId'] @ZoneState = params['ZoneState'] @RegionId = params['RegionId'] @ZoneName = params['ZoneName'] @ZoneResourceState = params['ZoneResourceState'] end end # 接收人信息 class ReceiverInfo < TencentCloud::Common::AbstractModel # @param StartTime: 告警时间段开始时间。范围[0,86400),作为 UNIX 时间戳转成北京时间后去掉日期,例如7200表示"10:0:0" # @type StartTime: Integer # @param EndTime: 告警时间段结束时间。含义同StartTime # @type EndTime: Integer # @param NotifyWay: 告警通知方式。可选 "SMS","SITE","EMAIL","CALL","WECHAT" # @type NotifyWay: Array # @param ReceiverType: 接收人类型。“group” 或 “user” # @type ReceiverType: String # @param Id: ReceiverId # @type Id: Integer # @param SendFor: 电话告警通知时机。可选"OCCUR"(告警时通知),"RECOVER"(恢复时通知) # @type SendFor: Array # @param UidList: 电话告警接收者 UID # @type UidList: Array # @param RoundNumber: 电话告警轮数 # @type RoundNumber: Integer # @param PersonInterval: 电话告警对个人间隔(秒) # @type PersonInterval: Integer # @param RoundInterval: 电话告警每轮间隔(秒) # @type RoundInterval: Integer # @param RecoverNotify: 恢复通知方式。可选"SMS" # @type RecoverNotify: Array # @param NeedSendNotice: 是否需要电话告警触达提示。0不需要,1需要 # @type NeedSendNotice: Integer # @param ReceiverGroupList: 接收组列表。通过平台接口查询到的接收组 ID 列表 # @type ReceiverGroupList: Array # @param ReceiverUserList: 接收人列表。通过平台接口查询到的接收人 ID 列表 # @type ReceiverUserList: Array # @param ReceiveLanguage: 告警接收语言,枚举值(zh-CN,en-US) # @type ReceiveLanguage: String attr_accessor :StartTime, :EndTime, :NotifyWay, :ReceiverType, :Id, :SendFor, :UidList, :RoundNumber, :PersonInterval, :RoundInterval, :RecoverNotify, :NeedSendNotice, :ReceiverGroupList, :ReceiverUserList, :ReceiveLanguage def initialize(starttime=nil, endtime=nil, notifyway=nil, receivertype=nil, id=nil, sendfor=nil, uidlist=nil, roundnumber=nil, personinterval=nil, roundinterval=nil, recovernotify=nil, needsendnotice=nil, receivergrouplist=nil, receiveruserlist=nil, receivelanguage=nil) @StartTime = starttime @EndTime = endtime @NotifyWay = notifyway @ReceiverType = receivertype @Id = id @SendFor = sendfor @UidList = uidlist @RoundNumber = roundnumber @PersonInterval = personinterval @RoundInterval = roundinterval @RecoverNotify = recovernotify @NeedSendNotice = needsendnotice @ReceiverGroupList = receivergrouplist @ReceiverUserList = receiveruserlist @ReceiveLanguage = receivelanguage end def deserialize(params) @StartTime = params['StartTime'] @EndTime = params['EndTime'] @NotifyWay = params['NotifyWay'] @ReceiverType = params['ReceiverType'] @Id = params['Id'] @SendFor = params['SendFor'] @UidList = params['UidList'] @RoundNumber = params['RoundNumber'] @PersonInterval = params['PersonInterval'] @RoundInterval = params['RoundInterval'] @RecoverNotify = params['RecoverNotify'] @NeedSendNotice = params['NeedSendNotice'] @ReceiverGroupList = params['ReceiverGroupList'] @ReceiverUserList = params['ReceiverUserList'] @ReceiveLanguage = params['ReceiveLanguage'] end end # Prometheus 聚合规则响应结构体内信息 class RecordingRuleSet < TencentCloud::Common::AbstractModel # @param RuleId: 规则 ID # @type RuleId: String # @param RuleState: 规则状态码 # @type RuleState: Integer # @param Name: 分组名称 # @type Name: String # @param Group: 规则内容组 # @type Group: String # @param Total: 规则数量 # @type Total: Integer # @param CreatedAt: 规则创建时间 # @type CreatedAt: String # @param UpdatedAt: 规则最近更新时间 # @type UpdatedAt: String # @param RuleName: 规则名称 # 注意:此字段可能返回 null,表示取不到有效值。 # @type RuleName: String attr_accessor :RuleId, :RuleState, :Name, :Group, :Total, :CreatedAt, :UpdatedAt, :RuleName def initialize(ruleid=nil, rulestate=nil, name=nil, group=nil, total=nil, createdat=nil, updatedat=nil, rulename=nil) @RuleId = ruleid @RuleState = rulestate @Name = name @Group = group @Total = total @CreatedAt = createdat @UpdatedAt = updatedat @RuleName = rulename end def deserialize(params) @RuleId = params['RuleId'] @RuleState = params['RuleState'] @Name = params['Name'] @Group = params['Group'] @Total = params['Total'] @CreatedAt = params['CreatedAt'] @UpdatedAt = params['UpdatedAt'] @RuleName = params['RuleName'] end end # ResumeGrafanaInstance请求参数结构体 class ResumeGrafanaInstanceRequest < TencentCloud::Common::AbstractModel # @param InstanceId: Grafana 实例 ID,例如:grafana-12345678 # @type InstanceId: String attr_accessor :InstanceId def initialize(instanceid=nil) @InstanceId = instanceid end def deserialize(params) @InstanceId = params['InstanceId'] end end # ResumeGrafanaInstance返回参数结构体 class ResumeGrafanaInstanceResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # RunPrometheusInstance请求参数结构体 class RunPrometheusInstanceRequest < TencentCloud::Common::AbstractModel # @param InstanceId: 实例ID # @type InstanceId: String # @param SubnetId: 子网ID,默认使用实例所用子网初始化,也可通过该参数传递新的子网ID初始化 # @type SubnetId: String attr_accessor :InstanceId, :SubnetId def initialize(instanceid=nil, subnetid=nil) @InstanceId = instanceid @SubnetId = subnetid end def deserialize(params) @InstanceId = params['InstanceId'] @SubnetId = params['SubnetId'] end end # RunPrometheusInstance返回参数结构体 class RunPrometheusInstanceResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # Prometheus 服务发现信息 class ServiceDiscoveryItem < TencentCloud::Common::AbstractModel # @param Name: 服务发现名称 # @type Name: String # @param Namespace: 服务发现属于的 Namespace # @type Namespace: String # @param Kind: 服务发现类型: ServiceMonitor/PodMonitor # @type Kind: String # @param NamespaceSelector: Namespace 选取方式 # 注意:此字段可能返回 null,表示取不到有效值。 # @type NamespaceSelector: String # @param Selector: Label 选取方式 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Selector: String # @param Endpoints: Endpoints 信息(PodMonitor 不含该参数) # @type Endpoints: String # @param Yaml: 服务发现对应的配置信息 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Yaml: String attr_accessor :Name, :Namespace, :Kind, :NamespaceSelector, :Selector, :Endpoints, :Yaml def initialize(name=nil, namespace=nil, kind=nil, namespaceselector=nil, selector=nil, endpoints=nil, yaml=nil) @Name = name @Namespace = namespace @Kind = kind @NamespaceSelector = namespaceselector @Selector = selector @Endpoints = endpoints @Yaml = yaml end def deserialize(params) @Name = params['Name'] @Namespace = params['Namespace'] @Kind = params['Kind'] @NamespaceSelector = params['NamespaceSelector'] @Selector = params['Selector'] @Endpoints = params['Endpoints'] @Yaml = params['Yaml'] end end # SetDefaultAlarmPolicy请求参数结构体 class SetDefaultAlarmPolicyRequest < TencentCloud::Common::AbstractModel # @param Module: 模块名,固定值 monitor # @type Module: String # @param PolicyId: 告警策略 ID # @type PolicyId: String attr_accessor :Module, :PolicyId def initialize(_module=nil, policyid=nil) @Module = _module @PolicyId = policyid end def deserialize(params) @Module = params['Module'] @PolicyId = params['PolicyId'] end end # SetDefaultAlarmPolicy返回参数结构体 class SetDefaultAlarmPolicyResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # SyncPrometheusTemp请求参数结构体 class SyncPrometheusTempRequest < TencentCloud::Common::AbstractModel # @param TemplateId: 实例id # @type TemplateId: String # @param Targets: 同步目标 # @type Targets: Array attr_accessor :TemplateId, :Targets def initialize(templateid=nil, targets=nil) @TemplateId = templateid @Targets = targets end def deserialize(params) @TemplateId = params['TemplateId'] unless params['Targets'].nil? @Targets = [] params['Targets'].each do |i| prometheustemplatesynctarget_tmp = PrometheusTemplateSyncTarget.new prometheustemplatesynctarget_tmp.deserialize(i) @Targets << prometheustemplatesynctarget_tmp end end end end # SyncPrometheusTemp返回参数结构体 class SyncPrometheusTempResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # 标签 class Tag < TencentCloud::Common::AbstractModel # @param Key: 标签key # @type Key: String # @param Value: 标签value # @type Value: String attr_accessor :Key, :Value def initialize(key=nil, value=nil) @Key = key @Value = value end def deserialize(params) @Key = params['Key'] @Value = params['Value'] end end # 策略列表详情标签返回体 class TagInstance < TencentCloud::Common::AbstractModel # @param Key: 标签Key # 注意:此字段可能返回 null,表示取不到有效值。 # @type Key: String # @param Value: 标签Value # 注意:此字段可能返回 null,表示取不到有效值。 # @type Value: String # @param InstanceSum: 实例个数 # 注意:此字段可能返回 null,表示取不到有效值。 # @type InstanceSum: Integer # @param ServiceType: 产品类型,如:cvm # 注意:此字段可能返回 null,表示取不到有效值。 # @type ServiceType: String # @param RegionId: 地域ID # 注意:此字段可能返回 null,表示取不到有效值。 # @type RegionId: Integer # @param BindingStatus: 绑定状态,2:绑定成功,1:绑定中 # 注意:此字段可能返回 null,表示取不到有效值。 # @type BindingStatus: Integer # @param TagStatus: 标签状态,2:标签存在,1:标签不存在 # 注意:此字段可能返回 null,表示取不到有效值。 # @type TagStatus: Integer attr_accessor :Key, :Value, :InstanceSum, :ServiceType, :RegionId, :BindingStatus, :TagStatus def initialize(key=nil, value=nil, instancesum=nil, servicetype=nil, regionid=nil, bindingstatus=nil, tagstatus=nil) @Key = key @Value = value @InstanceSum = instancesum @ServiceType = servicetype @RegionId = regionid @BindingStatus = bindingstatus @TagStatus = tagstatus end def deserialize(params) @Key = params['Key'] @Value = params['Value'] @InstanceSum = params['InstanceSum'] @ServiceType = params['ServiceType'] @RegionId = params['RegionId'] @BindingStatus = params['BindingStatus'] @TagStatus = params['TagStatus'] end end # 抓取目标数 class Targets < TencentCloud::Common::AbstractModel # @param Total: 总数 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Total: Integer # @param Up: 在线数 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Up: Integer # @param Down: 不在线数 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Down: Integer # @param Unknown: 未知状态数 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Unknown: Integer attr_accessor :Total, :Up, :Down, :Unknown def initialize(total=nil, up=nil, down=nil, unknown=nil) @Total = total @Up = up @Down = down @Unknown = unknown end def deserialize(params) @Total = params['Total'] @Up = params['Up'] @Down = params['Down'] @Unknown = params['Unknown'] end end # 任务步骤信息 class TaskStepInfo < TencentCloud::Common::AbstractModel # @param Step: 步骤名称 # @type Step: String # @param LifeState: 生命周期 # pending : 步骤未开始 # running: 步骤执行中 # success: 步骤成功完成 # failed: 步骤失败 # @type LifeState: String # @param StartAt: 步骤开始时间 # 注意:此字段可能返回 null,表示取不到有效值。 # @type StartAt: String # @param EndAt: 步骤结束时间 # 注意:此字段可能返回 null,表示取不到有效值。 # @type EndAt: String # @param FailedMsg: 若步骤生命周期为failed,则此字段显示错误信息 # 注意:此字段可能返回 null,表示取不到有效值。 # @type FailedMsg: String attr_accessor :Step, :LifeState, :StartAt, :EndAt, :FailedMsg def initialize(step=nil, lifestate=nil, startat=nil, endat=nil, failedmsg=nil) @Step = step @LifeState = lifestate @StartAt = startat @EndAt = endat @FailedMsg = failedmsg end def deserialize(params) @Step = params['Step'] @LifeState = params['LifeState'] @StartAt = params['StartAt'] @EndAt = params['EndAt'] @FailedMsg = params['FailedMsg'] end end # 模板列表 class TemplateGroup < TencentCloud::Common::AbstractModel # @param Conditions: 指标告警规则 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Conditions: Array # @param EventConditions: 事件告警规则 # 注意:此字段可能返回 null,表示取不到有效值。 # @type EventConditions: Array # @param PolicyGroups: 关联告警策略组 # 注意:此字段可能返回 null,表示取不到有效值。 # @type PolicyGroups: Array # @param GroupID: 模板策略组ID # @type GroupID: Integer # @param GroupName: 模板策略组名称 # @type GroupName: String # @param InsertTime: 创建时间 # @type InsertTime: Integer # @param LastEditUin: 最后修改人UIN # @type LastEditUin: Integer # @param Remark: 备注 # @type Remark: String # @param UpdateTime: 更新时间 # @type UpdateTime: Integer # @param ViewName: 视图 # @type ViewName: String # @param IsUnionRule: 是否为与关系 # @type IsUnionRule: Integer attr_accessor :Conditions, :EventConditions, :PolicyGroups, :GroupID, :GroupName, :InsertTime, :LastEditUin, :Remark, :UpdateTime, :ViewName, :IsUnionRule def initialize(conditions=nil, eventconditions=nil, policygroups=nil, groupid=nil, groupname=nil, inserttime=nil, lastedituin=nil, remark=nil, updatetime=nil, viewname=nil, isunionrule=nil) @Conditions = conditions @EventConditions = eventconditions @PolicyGroups = policygroups @GroupID = groupid @GroupName = groupname @InsertTime = inserttime @LastEditUin = lastedituin @Remark = remark @UpdateTime = updatetime @ViewName = viewname @IsUnionRule = isunionrule end def deserialize(params) unless params['Conditions'].nil? @Conditions = [] params['Conditions'].each do |i| condition_tmp = Condition.new condition_tmp.deserialize(i) @Conditions << condition_tmp end end unless params['EventConditions'].nil? @EventConditions = [] params['EventConditions'].each do |i| eventcondition_tmp = EventCondition.new eventcondition_tmp.deserialize(i) @EventConditions << eventcondition_tmp end end unless params['PolicyGroups'].nil? @PolicyGroups = [] params['PolicyGroups'].each do |i| policygroup_tmp = PolicyGroup.new policygroup_tmp.deserialize(i) @PolicyGroups << policygroup_tmp end end @GroupID = params['GroupID'] @GroupName = params['GroupName'] @InsertTime = params['InsertTime'] @LastEditUin = params['LastEditUin'] @Remark = params['Remark'] @UpdateTime = params['UpdateTime'] @ViewName = params['ViewName'] @IsUnionRule = params['IsUnionRule'] end end # TerminatePrometheusInstances请求参数结构体 class TerminatePrometheusInstancesRequest < TencentCloud::Common::AbstractModel # @param InstanceIds: 实例 ID 列表 # @type InstanceIds: Array attr_accessor :InstanceIds def initialize(instanceids=nil) @InstanceIds = instanceids end def deserialize(params) @InstanceIds = params['InstanceIds'] end end # TerminatePrometheusInstances返回参数结构体 class TerminatePrometheusInstancesResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # kubernetes Taint class Toleration < TencentCloud::Common::AbstractModel # @param Key: 容忍应用到的 taint key # @type Key: String # @param Operator: 键与值的关系 # @type Operator: String # @param Effect: 要匹配的污点效果 # @type Effect: String attr_accessor :Key, :Operator, :Effect def initialize(key=nil, operator=nil, effect=nil) @Key = key @Operator = operator @Effect = effect end def deserialize(params) @Key = params['Key'] @Operator = params['Operator'] @Effect = params['Effect'] end end # 告警通知模板 - 回调通知详情 class URLNotice < TencentCloud::Common::AbstractModel # @param URL: 回调 url(限长256字符) # 注意:此字段可能返回 null,表示取不到有效值。 # @type URL: String # @param IsValid: 是否通过验证 0=否 1=是 # 注意:此字段可能返回 null,表示取不到有效值。 # @type IsValid: Integer # @param ValidationCode: 验证码 # 注意:此字段可能返回 null,表示取不到有效值。 # @type ValidationCode: String # @param StartTime: 通知开始时间 一天开始的秒数 # 注意:此字段可能返回 null,表示取不到有效值。 # @type StartTime: Integer # @param EndTime: 通知结束时间 一天开始的秒数 # 注意:此字段可能返回 null,表示取不到有效值。 # @type EndTime: Integer # @param Weekday: 通知周期 1-7表示周一到周日 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Weekday: Array attr_accessor :URL, :IsValid, :ValidationCode, :StartTime, :EndTime, :Weekday def initialize(url=nil, isvalid=nil, validationcode=nil, starttime=nil, endtime=nil, weekday=nil) @URL = url @IsValid = isvalid @ValidationCode = validationcode @StartTime = starttime @EndTime = endtime @Weekday = weekday end def deserialize(params) @URL = params['URL'] @IsValid = params['IsValid'] @ValidationCode = params['ValidationCode'] @StartTime = params['StartTime'] @EndTime = params['EndTime'] @Weekday = params['Weekday'] end end # UnBindingAllPolicyObject请求参数结构体 class UnBindingAllPolicyObjectRequest < TencentCloud::Common::AbstractModel # @param Module: 固定值,为"monitor" # @type Module: String # @param GroupId: 策略组id,如传入 PolicyId 则该字段被忽略可传入任意值如 0 # @type GroupId: Integer # @param PolicyId: 告警策略ID,使用此字段时 GroupId 会被忽略 # @type PolicyId: String # @param EbSubject: 事件配置的告警 # @type EbSubject: String # @param EbEventFlag: 是否配置了事件告警 # @type EbEventFlag: Integer attr_accessor :Module, :GroupId, :PolicyId, :EbSubject, :EbEventFlag def initialize(_module=nil, groupid=nil, policyid=nil, ebsubject=nil, ebeventflag=nil) @Module = _module @GroupId = groupid @PolicyId = policyid @EbSubject = ebsubject @EbEventFlag = ebeventflag end def deserialize(params) @Module = params['Module'] @GroupId = params['GroupId'] @PolicyId = params['PolicyId'] @EbSubject = params['EbSubject'] @EbEventFlag = params['EbEventFlag'] end end # UnBindingAllPolicyObject返回参数结构体 class UnBindingAllPolicyObjectResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # UnBindingPolicyObject请求参数结构体 class UnBindingPolicyObjectRequest < TencentCloud::Common::AbstractModel # @param Module: 固定值,为"monitor" # @type Module: String # @param GroupId: 策略组id,如传入 PolicyId 则该字段被忽略可传入任意值如 0 # @type GroupId: Integer # @param UniqueId: 待删除对象实例的唯一id列表,UniqueId从调用[获取已绑定对象列表接口](https://cloud.tencent.com/document/api/248/40570)的出参的List中得到 # @type UniqueId: Array # @param InstanceGroupId: 实例分组id,如果按实例分组删除的话UniqueId参数是无效的 # @type InstanceGroupId: Integer # @param PolicyId: 告警策略ID,使用此字段时 GroupId 会被忽略 # @type PolicyId: String # @param EbSubject: 事件配置的告警 # @type EbSubject: String # @param EbEventFlag: 是否配置了事件告警 # @type EbEventFlag: Integer attr_accessor :Module, :GroupId, :UniqueId, :InstanceGroupId, :PolicyId, :EbSubject, :EbEventFlag def initialize(_module=nil, groupid=nil, uniqueid=nil, instancegroupid=nil, policyid=nil, ebsubject=nil, ebeventflag=nil) @Module = _module @GroupId = groupid @UniqueId = uniqueid @InstanceGroupId = instancegroupid @PolicyId = policyid @EbSubject = ebsubject @EbEventFlag = ebeventflag end def deserialize(params) @Module = params['Module'] @GroupId = params['GroupId'] @UniqueId = params['UniqueId'] @InstanceGroupId = params['InstanceGroupId'] @PolicyId = params['PolicyId'] @EbSubject = params['EbSubject'] @EbEventFlag = params['EbEventFlag'] end end # UnBindingPolicyObject返回参数结构体 class UnBindingPolicyObjectResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # UnbindPrometheusManagedGrafana请求参数结构体 class UnbindPrometheusManagedGrafanaRequest < TencentCloud::Common::AbstractModel # @param InstanceId: Prometheus 实例 ID # @type InstanceId: String # @param GrafanaId: Grafana 实例 ID # @type GrafanaId: String attr_accessor :InstanceId, :GrafanaId def initialize(instanceid=nil, grafanaid=nil) @InstanceId = instanceid @GrafanaId = grafanaid end def deserialize(params) @InstanceId = params['InstanceId'] @GrafanaId = params['GrafanaId'] end end # UnbindPrometheusManagedGrafana返回参数结构体 class UnbindPrometheusManagedGrafanaResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # UninstallGrafanaDashboard请求参数结构体 class UninstallGrafanaDashboardRequest < TencentCloud::Common::AbstractModel # @param InstanceId: 实例 ID # @type InstanceId: String # @param IntegrationCodes: Prometheus 集成项 Code,删除对应的 Dashboard,Code 如下: #
  • spring_mvc
  • #
  • mysql
  • #
  • go
  • #
  • redis
  • #
  • jvm
  • #
  • pgsql
  • #
  • mongo
  • #
  • kafka
  • #
  • es
  • #
  • flink
  • #
  • blackbox
  • #
  • consule
  • #
  • memcached
  • #
  • zk
  • #
  • tps
  • #
  • istio
  • #
  • etcd
  • # @type IntegrationCodes: Array attr_accessor :InstanceId, :IntegrationCodes def initialize(instanceid=nil, integrationcodes=nil) @InstanceId = instanceid @IntegrationCodes = integrationcodes end def deserialize(params) @InstanceId = params['InstanceId'] @IntegrationCodes = params['IntegrationCodes'] end end # UninstallGrafanaDashboard返回参数结构体 class UninstallGrafanaDashboardResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # UninstallGrafanaPlugins请求参数结构体 class UninstallGrafanaPluginsRequest < TencentCloud::Common::AbstractModel # @param PluginIds: 插件 ID 数组,例如"PluginIds": [ "grafana-clock-panel" ],可通过 DescribePluginOverviews 获取 PluginId # @type PluginIds: Array # @param InstanceId: Grafana 实例 ID,例如:grafana-abcdefg # @type InstanceId: String attr_accessor :PluginIds, :InstanceId def initialize(pluginids=nil, instanceid=nil) @PluginIds = pluginids @InstanceId = instanceid end def deserialize(params) @PluginIds = params['PluginIds'] @InstanceId = params['InstanceId'] end end # UninstallGrafanaPlugins返回参数结构体 class UninstallGrafanaPluginsResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # UpdateAlertRule请求参数结构体 class UpdateAlertRuleRequest < TencentCloud::Common::AbstractModel # @param RuleId: Prometheus 高警规则 ID # @type RuleId: String # @param InstanceId: Prometheus 实例 ID # @type InstanceId: String # @param RuleState: 规则状态码,取值如下: #
  • 1=RuleDeleted
  • #
  • 2=RuleEnabled
  • #
  • 3=RuleDisabled
  • # 默认状态码为 2 启用。 # @type RuleState: Integer # @param RuleName: 告警规则名称 # @type RuleName: String # @param Expr: 告警规则表达式 # @type Expr: String # @param Duration: 告警规则持续时间 # @type Duration: String # @param Receivers: 告警规则接收组列表(当前规则绑定的接收组列表可通过 DescribeAlertRules 接口获取;用户已有的接收组列表可通过 DescribeAlarmNotices 接口获取) # @type Receivers: Array # @param Labels: 报警规则标签列表 # @type Labels: Array # @param Annotations: 报警规则注释列表。 # 告警对象和告警消息是 Prometheus Rule Annotations 的特殊字段,需要通过 annotations 来传递,对应的 Key 分别为summary/description。 # @type Annotations: Array # @param Type: 报警策略模板分类(自定义,可不填) # @type Type: String attr_accessor :RuleId, :InstanceId, :RuleState, :RuleName, :Expr, :Duration, :Receivers, :Labels, :Annotations, :Type def initialize(ruleid=nil, instanceid=nil, rulestate=nil, rulename=nil, expr=nil, duration=nil, receivers=nil, labels=nil, annotations=nil, type=nil) @RuleId = ruleid @InstanceId = instanceid @RuleState = rulestate @RuleName = rulename @Expr = expr @Duration = duration @Receivers = receivers @Labels = labels @Annotations = annotations @Type = type end def deserialize(params) @RuleId = params['RuleId'] @InstanceId = params['InstanceId'] @RuleState = params['RuleState'] @RuleName = params['RuleName'] @Expr = params['Expr'] @Duration = params['Duration'] @Receivers = params['Receivers'] unless params['Labels'].nil? @Labels = [] params['Labels'].each do |i| prometheusrulekv_tmp = PrometheusRuleKV.new prometheusrulekv_tmp.deserialize(i) @Labels << prometheusrulekv_tmp end end unless params['Annotations'].nil? @Annotations = [] params['Annotations'].each do |i| prometheusrulekv_tmp = PrometheusRuleKV.new prometheusrulekv_tmp.deserialize(i) @Annotations << prometheusrulekv_tmp end end @Type = params['Type'] end end # UpdateAlertRule返回参数结构体 class UpdateAlertRuleResponse < TencentCloud::Common::AbstractModel # @param RuleId: 规则 ID # @type RuleId: String # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RuleId, :RequestId def initialize(ruleid=nil, requestid=nil) @RuleId = ruleid @RequestId = requestid end def deserialize(params) @RuleId = params['RuleId'] @RequestId = params['RequestId'] end end # UpdateAlertRuleState请求参数结构体 class UpdateAlertRuleStateRequest < TencentCloud::Common::AbstractModel # @param RuleIds: 规则 ID 列表 # @type RuleIds: Array # @param InstanceId: Prometheus 实例 ID # @type InstanceId: String # @param RuleState: 规则状态码,取值如下: #
  • 2=RuleEnabled
  • #
  • 3=RuleDisabled
  • # 默认状态码为 2 启用。 # @type RuleState: Integer attr_accessor :RuleIds, :InstanceId, :RuleState def initialize(ruleids=nil, instanceid=nil, rulestate=nil) @RuleIds = ruleids @InstanceId = instanceid @RuleState = rulestate end def deserialize(params) @RuleIds = params['RuleIds'] @InstanceId = params['InstanceId'] @RuleState = params['RuleState'] end end # UpdateAlertRuleState返回参数结构体 class UpdateAlertRuleStateResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # UpdateDNSConfig请求参数结构体 class UpdateDNSConfigRequest < TencentCloud::Common::AbstractModel # @param InstanceId: Grafana 实例 ID,例如:grafana-12345678 # @type InstanceId: String # @param NameServers: DNS 数组 # @type NameServers: Array attr_accessor :InstanceId, :NameServers def initialize(instanceid=nil, nameservers=nil) @InstanceId = instanceid @NameServers = nameservers end def deserialize(params) @InstanceId = params['InstanceId'] @NameServers = params['NameServers'] end end # UpdateDNSConfig返回参数结构体 class UpdateDNSConfigResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # UpdateExporterIntegration请求参数结构体 class UpdateExporterIntegrationRequest < TencentCloud::Common::AbstractModel # @param InstanceId: Prometheus 实例 ID # @type InstanceId: String # @param Kind: 类型(可通过 DescribeExporterIntegrations 获取对应集成的 Kind) # @type Kind: String # @param Content: 配置内容(可通过 DescribeExporterIntegrations 接口获取对应集成的 Content,并在此基础上做修改) # @type Content: String # @param KubeType: Kubernetes 集群类型,可不填。取值如下: #
  • 1= 容器集群(TKE)
  • #
  • 2=弹性集群(EKS)
  • #
  • 3= Prometheus管理的弹性集群(MEKS)
  • # @type KubeType: Integer # @param ClusterId: 集群 ID,可不填 # @type ClusterId: String attr_accessor :InstanceId, :Kind, :Content, :KubeType, :ClusterId def initialize(instanceid=nil, kind=nil, content=nil, kubetype=nil, clusterid=nil) @InstanceId = instanceid @Kind = kind @Content = content @KubeType = kubetype @ClusterId = clusterid end def deserialize(params) @InstanceId = params['InstanceId'] @Kind = params['Kind'] @Content = params['Content'] @KubeType = params['KubeType'] @ClusterId = params['ClusterId'] end end # UpdateExporterIntegration返回参数结构体 class UpdateExporterIntegrationResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # UpdateGrafanaConfig请求参数结构体 class UpdateGrafanaConfigRequest < TencentCloud::Common::AbstractModel # @param InstanceId: 实例 ID # @type InstanceId: String # @param Config: JSON 编码后的字符串,如 "{"server":{"root_url":"http://custom.domain"}}" # @type Config: String attr_accessor :InstanceId, :Config def initialize(instanceid=nil, config=nil) @InstanceId = instanceid @Config = config end def deserialize(params) @InstanceId = params['InstanceId'] @Config = params['Config'] end end # UpdateGrafanaConfig返回参数结构体 class UpdateGrafanaConfigResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # UpdateGrafanaEnvironments请求参数结构体 class UpdateGrafanaEnvironmentsRequest < TencentCloud::Common::AbstractModel # @param InstanceId: Grafana 实例 ID,例如:grafana-12345678 # @type InstanceId: String # @param Envs: JSON 序列化后的环境变量字符串,如 "{\"key1\":\"key2\"}" # @type Envs: String attr_accessor :InstanceId, :Envs def initialize(instanceid=nil, envs=nil) @InstanceId = instanceid @Envs = envs end def deserialize(params) @InstanceId = params['InstanceId'] @Envs = params['Envs'] end end # UpdateGrafanaEnvironments返回参数结构体 class UpdateGrafanaEnvironmentsResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # UpdateGrafanaIntegration请求参数结构体 class UpdateGrafanaIntegrationRequest < TencentCloud::Common::AbstractModel # @param IntegrationId: 集成 ID,可在实例详情-云产品集成-集成列表查看。例如:integration-abcd1234 # @type IntegrationId: String # @param InstanceId: Grafana 实例 ID,例如:grafana-12345678 # @type InstanceId: String # @param Kind: 集成类型,可在实例详情-云产品集成-集成列表查看。例如:tencent-cloud-prometheus # @type Kind: String # @param Content: 集成内容,请查看示例 # @type Content: String attr_accessor :IntegrationId, :InstanceId, :Kind, :Content def initialize(integrationid=nil, instanceid=nil, kind=nil, content=nil) @IntegrationId = integrationid @InstanceId = instanceid @Kind = kind @Content = content end def deserialize(params) @IntegrationId = params['IntegrationId'] @InstanceId = params['InstanceId'] @Kind = params['Kind'] @Content = params['Content'] end end # UpdateGrafanaIntegration返回参数结构体 class UpdateGrafanaIntegrationResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # UpdateGrafanaNotificationChannel请求参数结构体 class UpdateGrafanaNotificationChannelRequest < TencentCloud::Common::AbstractModel # @param ChannelId: 通道 ID,例如:nchannel-abcd1234 # @type ChannelId: String # @param InstanceId: Grafana 实例 ID,例如:grafana-12345678 # @type InstanceId: String # @param Receivers: 接受告警通道 ID 数组 # @type Receivers: Array # @param ChannelName: 告警通道名称,已废弃,名称不可修改。 # @type ChannelName: String # @param ExtraOrgIds: 已废弃,请使用 OrganizationIds # @type ExtraOrgIds: Array # @param OrganizationIds: 生效的组织 ID 数组 # @type OrganizationIds: Array attr_accessor :ChannelId, :InstanceId, :Receivers, :ChannelName, :ExtraOrgIds, :OrganizationIds def initialize(channelid=nil, instanceid=nil, receivers=nil, channelname=nil, extraorgids=nil, organizationids=nil) @ChannelId = channelid @InstanceId = instanceid @Receivers = receivers @ChannelName = channelname @ExtraOrgIds = extraorgids @OrganizationIds = organizationids end def deserialize(params) @ChannelId = params['ChannelId'] @InstanceId = params['InstanceId'] @Receivers = params['Receivers'] @ChannelName = params['ChannelName'] @ExtraOrgIds = params['ExtraOrgIds'] @OrganizationIds = params['OrganizationIds'] end end # UpdateGrafanaNotificationChannel返回参数结构体 class UpdateGrafanaNotificationChannelResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # UpdateGrafanaWhiteList请求参数结构体 class UpdateGrafanaWhiteListRequest < TencentCloud::Common::AbstractModel # @param InstanceId: Grafana 实例 ID,例如:grafana-abcdefgh # @type InstanceId: String # @param Whitelist: 白名单数组,输入白名单 IP 或 CIDR,如:127.0.0.1或127.0.0.1/24 # 如有多个 IP 可换行输入 # @type Whitelist: Array attr_accessor :InstanceId, :Whitelist def initialize(instanceid=nil, whitelist=nil) @InstanceId = instanceid @Whitelist = whitelist end def deserialize(params) @InstanceId = params['InstanceId'] @Whitelist = params['Whitelist'] end end # UpdateGrafanaWhiteList返回参数结构体 class UpdateGrafanaWhiteListResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # UpdatePrometheusAgentStatus请求参数结构体 class UpdatePrometheusAgentStatusRequest < TencentCloud::Common::AbstractModel # @param InstanceId: Prometheus 实例 ID # @type InstanceId: String # @param AgentIds: Agent ID 列表,例如:agent-abcd1234,可在控制台 Agent 管理中获取 # @type AgentIds: Array # @param Status: 要更新的状态 #
  • 1= 开启
  • #
  • 2= 关闭
  • # @type Status: Integer attr_accessor :InstanceId, :AgentIds, :Status def initialize(instanceid=nil, agentids=nil, status=nil) @InstanceId = instanceid @AgentIds = agentids @Status = status end def deserialize(params) @InstanceId = params['InstanceId'] @AgentIds = params['AgentIds'] @Status = params['Status'] end end # UpdatePrometheusAgentStatus返回参数结构体 class UpdatePrometheusAgentStatusResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # UpdatePrometheusAlertGroup请求参数结构体 class UpdatePrometheusAlertGroupRequest < TencentCloud::Common::AbstractModel # @param InstanceId: prometheus实例ID # @type InstanceId: String # @param GroupId: 告警分组ID,形如alert-xxxx # @type GroupId: String # @param GroupName: 告警分组名称,不能与其他告警分组重名 # @type GroupName: String # @param GroupState: 告警分组状态: # 2 -- 启用 # 3 -- 禁用 # 不为空时会覆盖 `Rules`字段下所有告警规则状态 # @type GroupState: Integer # @param AMPReceivers: 云监控告警通知模板ID列表,形如Consumer-xxxx或notice-xxxx # @type AMPReceivers: Array # @param CustomReceiver: 自定义告警通知模板 # @type CustomReceiver: :class:`Tencentcloud::Monitor.v20180724.models.PrometheusAlertCustomReceiver` # @param RepeatInterval: 告警通知周期(收敛时间),为空默认1h # @type RepeatInterval: String # @param Rules: 要创建的告警规则列表 # @type Rules: Array attr_accessor :InstanceId, :GroupId, :GroupName, :GroupState, :AMPReceivers, :CustomReceiver, :RepeatInterval, :Rules def initialize(instanceid=nil, groupid=nil, groupname=nil, groupstate=nil, ampreceivers=nil, customreceiver=nil, repeatinterval=nil, rules=nil) @InstanceId = instanceid @GroupId = groupid @GroupName = groupname @GroupState = groupstate @AMPReceivers = ampreceivers @CustomReceiver = customreceiver @RepeatInterval = repeatinterval @Rules = rules end def deserialize(params) @InstanceId = params['InstanceId'] @GroupId = params['GroupId'] @GroupName = params['GroupName'] @GroupState = params['GroupState'] @AMPReceivers = params['AMPReceivers'] unless params['CustomReceiver'].nil? @CustomReceiver = PrometheusAlertCustomReceiver.new @CustomReceiver.deserialize(params['CustomReceiver']) end @RepeatInterval = params['RepeatInterval'] unless params['Rules'].nil? @Rules = [] params['Rules'].each do |i| prometheusalertgroupruleset_tmp = PrometheusAlertGroupRuleSet.new prometheusalertgroupruleset_tmp.deserialize(i) @Rules << prometheusalertgroupruleset_tmp end end end end # UpdatePrometheusAlertGroup返回参数结构体 class UpdatePrometheusAlertGroupResponse < TencentCloud::Common::AbstractModel # @param GroupId: 更新的告警分组ID,满足正则表达式`alert-[a-z0-9]{8}` # @type GroupId: String # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :GroupId, :RequestId def initialize(groupid=nil, requestid=nil) @GroupId = groupid @RequestId = requestid end def deserialize(params) @GroupId = params['GroupId'] @RequestId = params['RequestId'] end end # UpdatePrometheusAlertGroupState请求参数结构体 class UpdatePrometheusAlertGroupStateRequest < TencentCloud::Common::AbstractModel # @param InstanceId: Prometheus 实例 ID # @type InstanceId: String # @param GroupIds: 告警分组ID列表,形如alert-xxxx # @type GroupIds: Array # @param GroupState: 告警分组状态 # 2 -- 启用 # 3 -- 禁用 # @type GroupState: Integer attr_accessor :InstanceId, :GroupIds, :GroupState def initialize(instanceid=nil, groupids=nil, groupstate=nil) @InstanceId = instanceid @GroupIds = groupids @GroupState = groupstate end def deserialize(params) @InstanceId = params['InstanceId'] @GroupIds = params['GroupIds'] @GroupState = params['GroupState'] end end # UpdatePrometheusAlertGroupState返回参数结构体 class UpdatePrometheusAlertGroupStateResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # UpdatePrometheusScrapeJob请求参数结构体 class UpdatePrometheusScrapeJobRequest < TencentCloud::Common::AbstractModel # @param InstanceId: Prometheus 实例 ID(可通过 DescribePrometheusInstances 接口获取) # @type InstanceId: String # @param AgentId: Agent ID(可通过DescribePrometheusAgents 接口获取) # @type AgentId: String # @param JobId: 抓取任务 ID(可通过 DescribePrometheusScrapeJobs 接口获取) # @type JobId: String # @param Config: 抓取任务配置 # @type Config: String attr_accessor :InstanceId, :AgentId, :JobId, :Config def initialize(instanceid=nil, agentid=nil, jobid=nil, config=nil) @InstanceId = instanceid @AgentId = agentid @JobId = jobid @Config = config end def deserialize(params) @InstanceId = params['InstanceId'] @AgentId = params['AgentId'] @JobId = params['JobId'] @Config = params['Config'] end end # UpdatePrometheusScrapeJob返回参数结构体 class UpdatePrometheusScrapeJobResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # UpdateRecordingRule请求参数结构体 class UpdateRecordingRuleRequest < TencentCloud::Common::AbstractModel # @param Name: 聚合规则名称 # @type Name: String # @param Group: 聚合规则组内容,格式为 yaml,通过 base64 进行编码。 # @type Group: String # @param InstanceId: Prometheus 实例 ID(可通过 DescribePrometheusInstances 接口获取) # @type InstanceId: String # @param RuleId: Prometheus 聚合规则 ID(可通过 DescribeRecordingRules 接口获取) # @type RuleId: String # @param RuleState: 规则状态码,取值如下: #
  • 1=RuleDeleted
  • #
  • 2=RuleEnabled
  • #
  • 3=RuleDisabled
  • # 默认状态码为 2 启用。 # @type RuleState: Integer attr_accessor :Name, :Group, :InstanceId, :RuleId, :RuleState def initialize(name=nil, group=nil, instanceid=nil, ruleid=nil, rulestate=nil) @Name = name @Group = group @InstanceId = instanceid @RuleId = ruleid @RuleState = rulestate end def deserialize(params) @Name = params['Name'] @Group = params['Group'] @InstanceId = params['InstanceId'] @RuleId = params['RuleId'] @RuleState = params['RuleState'] end end # UpdateRecordingRule返回参数结构体 class UpdateRecordingRuleResponse < TencentCloud::Common::AbstractModel # @param RuleId: 规则 ID # 注意:此字段可能返回 null,表示取不到有效值。 # @type RuleId: String # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RuleId, :RequestId def initialize(ruleid=nil, requestid=nil) @RuleId = ruleid @RequestId = requestid end def deserialize(params) @RuleId = params['RuleId'] @RequestId = params['RequestId'] end end # UpdateSSOAccount请求参数结构体 class UpdateSSOAccountRequest < TencentCloud::Common::AbstractModel # @param InstanceId: Grafana 实例 ID,例如:grafana-abcdefgh # @type InstanceId: String # @param UserId: 用户账号 ID ,例如:10000000 # @type UserId: String # @param Role: 权限 # @type Role: Array # @param Notes: 备注 # @type Notes: String attr_accessor :InstanceId, :UserId, :Role, :Notes def initialize(instanceid=nil, userid=nil, role=nil, notes=nil) @InstanceId = instanceid @UserId = userid @Role = role @Notes = notes end def deserialize(params) @InstanceId = params['InstanceId'] @UserId = params['UserId'] unless params['Role'].nil? @Role = [] params['Role'].each do |i| grafanaaccountrole_tmp = GrafanaAccountRole.new grafanaaccountrole_tmp.deserialize(i) @Role << grafanaaccountrole_tmp end end @Notes = params['Notes'] end end # UpdateSSOAccount返回参数结构体 class UpdateSSOAccountResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # UpdateServiceDiscovery请求参数结构体 class UpdateServiceDiscoveryRequest < TencentCloud::Common::AbstractModel # @param InstanceId: Prometheus 实例 ID # @type InstanceId: String # @param KubeClusterId:
  • 类型是 TKE,为对应的腾讯云容器服务集群 ID
  • # @type KubeClusterId: String # @param KubeType: 用户 Kubernetes 集群类型: #
  • 1 = 容器服务集群(TKE)
  • # @type KubeType: Integer # @param Type: 服务发现类型,取值如下: #
  • 1 = ServiceMonitor
  • #
  • 2 = PodMonitor
  • #
  • 3 = JobMonitor
  • # @type Type: Integer # @param Yaml: 服务发现配置信息,YAML 格式,[具体YAML参数内容请参考](https://cloud.tencent.com/document/product/1416/55995#service-monitor) # @type Yaml: String attr_accessor :InstanceId, :KubeClusterId, :KubeType, :Type, :Yaml def initialize(instanceid=nil, kubeclusterid=nil, kubetype=nil, type=nil, yaml=nil) @InstanceId = instanceid @KubeClusterId = kubeclusterid @KubeType = kubetype @Type = type @Yaml = yaml end def deserialize(params) @InstanceId = params['InstanceId'] @KubeClusterId = params['KubeClusterId'] @KubeType = params['KubeType'] @Type = params['Type'] @Yaml = params['Yaml'] end end # UpdateServiceDiscovery返回参数结构体 class UpdateServiceDiscoveryResponse < TencentCloud::Common::AbstractModel # @param ServiceDiscovery: 更新成功之后,返回对应服务发现的信息 # @type ServiceDiscovery: :class:`Tencentcloud::Monitor.v20180724.models.ServiceDiscoveryItem` # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :ServiceDiscovery, :RequestId def initialize(servicediscovery=nil, requestid=nil) @ServiceDiscovery = servicediscovery @RequestId = requestid end def deserialize(params) unless params['ServiceDiscovery'].nil? @ServiceDiscovery = ServiceDiscoveryItem.new @ServiceDiscovery.deserialize(params['ServiceDiscovery']) end @RequestId = params['RequestId'] end end # UpgradeGrafanaDashboard请求参数结构体 class UpgradeGrafanaDashboardRequest < TencentCloud::Common::AbstractModel # @param InstanceId: 实例 ID # @type InstanceId: String # @param IntegrationCodes: Prometheus 集成项 Code,升级对应的 Dashboard,取值如下:
  • qcloud
  • cvm_process_exporter
  • cvm_node_exporter
  • cvm
  • tps
  • nginx-ingress
  • nvidia-gpu
  • cdwch
  • emr
  • apache
  • rocketmq
  • rabbitmq
  • spring_mvc
  • mysql
  • mssql
  • go
  • redis
  • jvm
  • pgsql
  • ceph
  • docker
  • nginx
  • oracledb
  • mongo
  • kafka
  • es
  • flink
  • blackbox
  • consule
  • memcached
  • zk
  • tps
  • istio
  • etcd
  • pts
  • kong
  • # @type IntegrationCodes: Array attr_accessor :InstanceId, :IntegrationCodes def initialize(instanceid=nil, integrationcodes=nil) @InstanceId = instanceid @IntegrationCodes = integrationcodes end def deserialize(params) @InstanceId = params['InstanceId'] @IntegrationCodes = params['IntegrationCodes'] end end # UpgradeGrafanaDashboard返回参数结构体 class UpgradeGrafanaDashboardResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # UpgradeGrafanaInstance请求参数结构体 class UpgradeGrafanaInstanceRequest < TencentCloud::Common::AbstractModel # @param InstanceId: Grafana 实例 ID,例如:grafana-12345678 # @type InstanceId: String # @param Alias: 版本别名,目前固定为 v9.1.5 # @type Alias: String attr_accessor :InstanceId, :Alias def initialize(instanceid=nil, _alias=nil) @InstanceId = instanceid @Alias = _alias end def deserialize(params) @InstanceId = params['InstanceId'] @Alias = params['Alias'] end end # UpgradeGrafanaInstance返回参数结构体 class UpgradeGrafanaInstanceResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,由服务端生成,每次请求都会返回(若请求因其他原因未能抵达服务端,则该次请求不会获得 RequestId)。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # 告警通知模板 - 用户通知详情 class UserNotice < TencentCloud::Common::AbstractModel # @param ReceiverType: 接收者类型 USER=用户 GROUP=用户组 # 注意:此字段可能返回 null,表示取不到有效值。 # @type ReceiverType: String # @param StartTime: 通知开始时间 00:00:00 开始的秒数(取值范围0-86399) # 注意:此字段可能返回 null,表示取不到有效值。 # @type StartTime: Integer # @param EndTime: 通知结束时间 00:00:00 开始的秒数(取值范围0-86399) # 注意:此字段可能返回 null,表示取不到有效值。 # @type EndTime: Integer # @param NoticeWay: 通知渠道列表 EMAIL=邮件 SMS=短信 CALL=电话 WECHAT=微信 RTX=企业微信 # 注意:此字段可能返回 null,表示取不到有效值。 # @type NoticeWay: Array # @param UserIds: 用户 uid 列表 # 注意:此字段可能返回 null,表示取不到有效值。 # @type UserIds: Array # @param GroupIds: 用户组 group id 列表 # 注意:此字段可能返回 null,表示取不到有效值。 # @type GroupIds: Array # @param PhoneOrder: 电话轮询列表 # 注意:此字段可能返回 null,表示取不到有效值。 # @type PhoneOrder: Array # @param PhoneCircleTimes: 电话轮询次数 (取值范围1-5) # 注意:此字段可能返回 null,表示取不到有效值。 # @type PhoneCircleTimes: Integer # @param PhoneInnerInterval: 单次轮询内拨打间隔 秒数 (取值范围60-900) # 注意:此字段可能返回 null,表示取不到有效值。 # @type PhoneInnerInterval: Integer # @param PhoneCircleInterval: 两次轮询间隔 秒数(取值范围60-900) # 注意:此字段可能返回 null,表示取不到有效值。 # @type PhoneCircleInterval: Integer # @param NeedPhoneArriveNotice: 是否需要触达通知 0=否 1=是 # 注意:此字段可能返回 null,表示取不到有效值。 # @type NeedPhoneArriveNotice: Integer # @param PhoneCallType: 电话拨打类型 SYNC=同时拨打 CIRCLE=轮询拨打 不指定时默认是轮询 # 注意:此字段可能返回 null,表示取不到有效值。 # @type PhoneCallType: String # @param Weekday: 通知周期 1-7表示周一到周日 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Weekday: Array # @param OnCallFormIDs: 值班表id列表 # 注意:此字段可能返回 null,表示取不到有效值。 # @type OnCallFormIDs: Array # @param VoiceConfirmKey: 电话按键确认 # 注意:此字段可能返回 null,表示取不到有效值。 # @type VoiceConfirmKey: String attr_accessor :ReceiverType, :StartTime, :EndTime, :NoticeWay, :UserIds, :GroupIds, :PhoneOrder, :PhoneCircleTimes, :PhoneInnerInterval, :PhoneCircleInterval, :NeedPhoneArriveNotice, :PhoneCallType, :Weekday, :OnCallFormIDs, :VoiceConfirmKey def initialize(receivertype=nil, starttime=nil, endtime=nil, noticeway=nil, userids=nil, groupids=nil, phoneorder=nil, phonecircletimes=nil, phoneinnerinterval=nil, phonecircleinterval=nil, needphonearrivenotice=nil, phonecalltype=nil, weekday=nil, oncallformids=nil, voiceconfirmkey=nil) @ReceiverType = receivertype @StartTime = starttime @EndTime = endtime @NoticeWay = noticeway @UserIds = userids @GroupIds = groupids @PhoneOrder = phoneorder @PhoneCircleTimes = phonecircletimes @PhoneInnerInterval = phoneinnerinterval @PhoneCircleInterval = phonecircleinterval @NeedPhoneArriveNotice = needphonearrivenotice @PhoneCallType = phonecalltype @Weekday = weekday @OnCallFormIDs = oncallformids @VoiceConfirmKey = voiceconfirmkey end def deserialize(params) @ReceiverType = params['ReceiverType'] @StartTime = params['StartTime'] @EndTime = params['EndTime'] @NoticeWay = params['NoticeWay'] @UserIds = params['UserIds'] @GroupIds = params['GroupIds'] @PhoneOrder = params['PhoneOrder'] @PhoneCircleTimes = params['PhoneCircleTimes'] @PhoneInnerInterval = params['PhoneInnerInterval'] @PhoneCircleInterval = params['PhoneCircleInterval'] @NeedPhoneArriveNotice = params['NeedPhoneArriveNotice'] @PhoneCallType = params['PhoneCallType'] @Weekday = params['Weekday'] @OnCallFormIDs = params['OnCallFormIDs'] @VoiceConfirmKey = params['VoiceConfirmKey'] end end end end end