en: vagrant_zones: states: not_created: |- Your instance of this box haven't been created is_running: |- Your instance has already be booted errors: not_yet_implemented: |- Your configuration is not yet implemented halt_timeout: |- Zone failed to halt in alloted time after waiting for invalidLX_brand: |- Invalid LX brand configuration detected invalidbhyve_brand: |- Invalid bhyve configuration detected console_failed: |- Failed to access console console_failed: |- Failed to apply the netplan configuration inside the VM console_failed_exit: |- Exiting execute_error: |- Failed when execute commands timeout_error: |- Timeout exceeded system_version_too_low: |- Please update to OmniOS r38 or higher missing_compatability_check_tool: |- Please install the Bhyve compatability tool from: https://omnios.org/info/bhyve missing_bhyve: |- Your system appears to be missing bhyve virtual_box_running_conflict_detected: |- Virtualbox Box appears to be running virtual machines, to continue, please shut these down! meeting: |- Starting the zone creation sequence leaving: |- Starting the zone destruction sequence halting_zone: |- Halting the zone destroy_zone: |- Starting zone destruction graceful_shutdown_failed: |- Zone failed to shutdown in alloted time ==> graceful_shutdown: |- Asking hypervisor to gracefully stop the zone creating_vnic: |- - Creating VNIC: configure_interface_using_vnic: |- - Configuring the interface in the zone for VNIC using netplan: configure_win_interface_using_vnic: |- - Waiting 60 seconds then configuring the Windows network interface in the zone: configure_interface_using_vnic_dladm: |- - Configuring the interface in the zone for VNIC using dladm: os_detect: |- - Detecting Operating System to configure networking: ansible_detect: |- - Detecting if Ansible is installed: vnic_setup: |- - Setting up VNIC: networking_int_remove: |- Removing network devices: networking_int_add: |- - Adding network devices: removing_vnic: |- - Deleting zone VNIC: no_removing_vnic: |- - No zone VNIC to remove removing_host_vnic: |- - Deleting host VNIC: no_removing_host_vnic: |- - No host VNIC to remove network_setup: |- Preparing zone OS networking interfaces: delete_disks: |- Removing associated disks: zonelogincmd: |- Running command with zLogin user: |- Filtering the user Vagrant will use installing_zone: |- Installing zone as brand: netplan_remove: |- - Removing stale netplan configurations netplan_set: |- - Generate fresh netplan configurations dladm_applied: |- - dladm and ipadm configurations Applied dladm_route_applied: |- - Route has been applied dladm_dns_applied: |- - DNS has been applied netplan_applied: |- - New Netplan configurations Applied netplan_applied_dhcp: |- - Set DHCP Netplan configurations stale_netplan_removed: |- - Stale Netplan configurations removed netplan_applied_static: |- - Set static Netplan configurations: console_failednetplan: |- Netplan configurations failed lx_zone_dataset: |- - Creating zoned ZFS dataset for LX zone: bhyve_zone_dataset_root: |- - ZFS root dataset: begin_create_datasets: |- Creating ZFS datasets and volumes: bhyve_zone_dataset_boot: |- - ZFS boot volume: setting_cd_rom_configurations: |- - Setting CDROM Configurations: setting_additional_disks_configurations: |- - Setting additional disk Configurations: bhyve_zone_dataset_additional_volume: |- - Additional ZFS volume: bhyve_zone_dataset_additional_volume_destroy: |- - Additional ZFS volume: addtl_volume_destroy_root: |- - ZFS root dataset for additional ZFS volume: bhyve_zone_dataset_additional_volume_root: |- - ZFS root dataset for additional ZFS volume: destroy_root_dataset: |- - ZFS root dataset: destroy_dataset: |- - ZFS Boot volume dataset: lx_zone_config_gen: |- Generating configuration for LX zone bhyve_zone_config_gen: |- Generating zone configuration: bhyve_zone_config_remove: |- Removing zonecfg configuration bhyve_zone_config_uninstall: |- Uninstalling the zone preflight_checks: |- Running Preflight checks: vbox_run_check: |- - Checking if VirtualBox is loaded as it may conflict with bhyve lx_check: |- Minimal checks performed for LX Branded zones on the host OS, please use with caution! bhyve_check: |- - Checking OmniOS release against version: bhyve_compat_check: |- - Checking bhyve installation environment wait_for_boot: |- Waiting for the zone to boot sshport: |- Filtering the SSH port that Vagrant will use vagrantuserpass: |- Filtering the Vagrant user Password firmware: |- Filtering the firmware that bhyve will use inserting_ssh_key: |- Inserting SSH key booted_check_terminal_access: |- Zone booted, checking for login access/prompt over Serial: terminal_access_auto_login: |- Could not login as root, will attempt to auto-login with supplied credentials: detecting_box: |- Detecting image importing_vagrant_key: |- Importing Vagrant key from Cloud: datadir: |- Vagrant datadir: zfs_snapshot_stream_detected: |- ZFS Snapshot Stream detected ==> joyent_image_uuid_detected: |- Joyent UUID detected ==> vagrant_cloud_box_detected: |- - Vagrant Cloud Box detected: ssh_ready: |- SSH appears to be ready boot_ready: |- The zone has booted dhcp_boot_ready: |- The zone is configured with NAT and booted root_dataset_nil: |- - No root dataset to remove boot_dataset_nil: |- - No boot volumes to remove additional_dataset_nil: |- - No additional volumes to remove starting_zone: |- Starting the zone joyent_image_uuid_verified: |- Joyent image UUID has been verified ==> lx_zone_dataset: |- LX zone dataset ==> setting_dns_server: |- Setting nameserver ==> detected_ovf_format: |- Detected OVF importing_box_image: |- - Importing Box image ==> importing_box_image_to_disk: |- - Importing Box template to disk ==> template_import_path: |- - Template path: template_import_path_set_size: |- - Setting Boot Volume Size importing_joyent_image: |- - Importing Joyent image ==> graceful_restart: |- Zone gracefully restarting graceful_shutdown_started: |- Zone gracefully shutting down graceful_shutdown_complete: |- Graceful shutdown complete zone_gracefully_restarted: |- Graceful restart complete zone_gracefully_stopped_waiting_for_boot: |- Zone gracefully shutdown, now waiting for boot console: |- Starting console: setting_console_access: |- - Setting console access port: zfs_snapshot_cron: |- Listing configured cron jobs zfs_snapshot_create: |- Creating ZFS snapshot(s): setting_cloud_dnsdomain: |- - Setting cloud-init DNS domain: setting_cloud_password: |- - Setting cloud-init password: setting_cloud_resolvers: |- - Setting cloud-init Resolvers: setting_cloud_ssh_key: |- - Setting cloud-init SSH key: setting_cloud_init_access: |- - Enabling cloud-init: control_no_cmd: |- No control command specified ssh_run_command: |- Running Command over SSH: vtype: |- Filtering zone type nsservers: |- Sanitizing Name Servers: mac: |- Sanitizing MAC address: ipaddress: |- Sanitizing IP address: allowedaddress: |- Sanitizing Allowed IP address: vnic_name: |- Sanitizing the VNIC name: get_ip_address: |- Gathering IP address creating_etherstub: |- - Creating etherstub for private network: creating_etherhostvnic: |- - Creating NAT VNIC for zone over etherstub: creating_ethervnic: |- - Creating VNIC for host over etherstub: creating_networking_interfaces: |- Creating networking interfaces for zone: nat_vnic_setup: |- - Setting up NAT VNIC: vnic_conf_del: |- - Deleting zonecg for provisional VNIC: forwarding_nat: |- - Enabling NAT forwarding: configuring_nat: |- - Creating NAT entries: deconfiguring_nat: |- - Removing NAT configurations: configuring_dhcp: |- - Configuring DHCP deconfiguring_dhcp: |- - Removing DHCP configurations: chk_dhcp_addr: |- - Checking if zone has leased the address: setting_alt_shared_disk_configurations: |- Setting shared disk configurations zonecfgcpu: |- Setting the CPU for zone pci: |- Setting the PCI devices for zone zfs_snapshot_list: |- ZFS snapshots detected: zfs_snapshot_destroy: |- Destroying ZFS snapshots for zone: cron_entries: |- Listing cron entries for zone cron_set: |- Setting cron entries for zone cron_delete: |- Deleting cron entries for zone control: |- Running control command on zone: delete_ethervnic: |- - Deleting the etherstub: no_delete_ethervnic: |- - No etherstub to remove automated-zlogin: |- Automatic Login automated-windows-zlogin: |- Windows SAC Autologin automated-zlogin-user: |- - Entering username, Waiting a few seconds automated-zlogin-pass: |- - Entering password, Waiting a few seconds automated-zbootunlock: |- - Unlocking LUKS Keystore for the boot disk automated-zlogin-root: |- - Impersonating root, Waiting a few seconds windows_skip_first_boot: |- - Skipping First EVENT for CMD due to Sysprep Reboot windows_start_cmd: |- - Starting CMD session windows_access_session: |- - Accessing Command Session windows_access_session_presskey: |- - Pressing Any Key enter Command Session windows_enter_username: |- - Entering Username windows_enter_domain: |- - Entering/Skipping Domain windows_enter_password: |- - Entering password windows_cmd_accessible: |- - CMD Accessible win_applied_rename_adapter: |- - Renamed Default Adapter win_applied_static: |- - Set Static Address win_applied_dns1: |- - Set Primary DNS win_applied_dns2: |- - Set Secondary DNS