# Custom changes for the MediumOffice prototype.
# These are changes that are inconsistent with other prototype
# building types.
module MediumOffice
  def model_custom_hvac_tweaks(building_type, climate_zone, prototype_input, model)
    OpenStudio.logFree(OpenStudio::Info, 'openstudio.model.Model', 'Started building type specific adjustments')

    model.getSpaces.sort.each do |space|
      if space.name.get.to_s == 'Core_bottom'
        model_add_elevator(model,
                           space,
                           prototype_input['number_of_elevators'],
                           prototype_input['elevator_type'],
                           prototype_input['elevator_schedule'],
                           prototype_input['elevator_fan_schedule'],
                           prototype_input['elevator_fan_schedule'],
                           building_type)
      end
    end

    OpenStudio.logFree(OpenStudio::Info, 'openstudio.model.Model', 'Finished building type specific adjustments')

    # add extra infiltration for entry door
    add_door_infiltration(climate_zone, model)
    OpenStudio.logFree(OpenStudio::Info, 'openstudio.model.Model', 'Added door infiltration')

    return true
  end

  # add hvac

  def add_door_infiltration(climate_zone, model)
    # add extra infiltration for entry door in m3/s (there is no attic in 'DOE Ref Pre-1980')
    unless template == 'DOE Ref 1980-2004' || template == 'DOE Ref Pre-1980'
      entry_space = model.getSpaceByName('Perimeter_bot_ZN_1').get
      infiltration_entrydoor = OpenStudio::Model::SpaceInfiltrationDesignFlowRate.new(model)
      infiltration_entrydoor.setName('entry door Infiltration')
      infiltration_per_zone_entrydoor = 0
      if template == '90.1-2004'
        infiltration_per_zone_entrydoor = 1.04300287
        infiltration_entrydoor.setSchedule(model_add_schedule(model, 'OfficeMedium INFIL_Door_Opening_SCH'))
      elsif template == '90.1-2007' || template == '90.1-2010' || template == '90.1-2013'
        case climate_zone
          when 'ASHRAE 169-2006-1A', 'ASHRAE 169-2006-2A', 'ASHRAE 169-2006-1B', 'ASHRAE 169-2006-2B'
            infiltration_per_zone_entrydoor = 1.04300287
            infiltration_entrydoor.setSchedule(model_add_schedule(model, 'OfficeMedium INFIL_Door_Opening_SCH'))
          else
            infiltration_per_zone_entrydoor = 0.678659786
            infiltration_entrydoor.setSchedule(model_add_schedule(model, 'OfficeMedium INFIL_Door_Opening_SCH'))
        end
      end
      infiltration_entrydoor.setDesignFlowRate(infiltration_per_zone_entrydoor)
      infiltration_entrydoor.setSpace(entry_space)
    end
  end

  def model_custom_daylighting_tweaks(building_type, climate_zone, prototype_input, model)
    OpenStudio.logFree(OpenStudio::Info, 'openstudio.model.Model', 'Adjusting daylight sensor positions and fractions')

    adjustments = [
        { 'stds_spc_type' => 'WholeBuilding - Md Office',
          'sensor_1_frac' => 0.3835,
          'sensor_2_frac' => 0.1395,
        }
    ]

    # Adjust daylight sensors in each space
    model.getSpaces.each do |space|
      next if space.thermalZone.empty?
      zone = space.thermalZone.get
      next if space.spaceType.empty?
      spc_type = space.spaceType.get
      next if spc_type.standardsSpaceType.empty?
      stds_spc_type = spc_type.standardsSpaceType.get
      adjustments.each do |adj|
        next unless adj['stds_spc_type'] == stds_spc_type
        # Adjust the primary sensor
        if adj['sensor_1_frac'] && zone.primaryDaylightingControl.is_initialized
          OpenStudio.logFree(OpenStudio::Info, 'openstudio.model.Model', "For #{zone.name}: Adjusting primary daylight sensor to control #{adj['sensor_1_frac']} of the lighting.")
          zone.setFractionofZoneControlledbyPrimaryDaylightingControl(adj['sensor_1_frac'])
          pri_ctrl = zone.primaryDaylightingControl.get
          if adj['sensor_1_xyz']
            x = adj['sensor_1_xyz'][0]
            y = adj['sensor_1_xyz'][1]
            z = adj['sensor_1_xyz'][2]
            OpenStudio.logFree(OpenStudio::Info, 'openstudio.model.Model', "For #{zone.name}: Adjusting primary daylight sensor position to [#{x}, #{y}, #{z}].")
            pri_ctrl.setPositionXCoordinate(x)
            pri_ctrl.setPositionYCoordinate(y)
            pri_ctrl.setPositionZCoordinate(z)
          end
        end
        # Adjust the secondary sensor
        if adj['sensor_2_frac'] && zone.secondaryDaylightingControl.is_initialized
          OpenStudio.logFree(OpenStudio::Info, 'openstudio.model.Model', "For #{zone.name}: Adjusting secondary daylight sensor to control #{adj['sensor_2_frac']} of the lighting.")
          zone.setFractionofZoneControlledbySecondaryDaylightingControl(adj['sensor_2_frac'])
          sec_ctrl = zone.secondaryDaylightingControl.get
          if adj['sensor_2_xyz']
            x = adj['sensor_2_xyz'][0]
            y = adj['sensor_2_xyz'][1]
            z = adj['sensor_2_xyz'][2]
            OpenStudio.logFree(OpenStudio::Info, 'openstudio.model.Model', "For #{zone.name}: Adjusting secondary daylight sensor position to [#{x}, #{y}, #{z}].")
            sec_ctrl.setPositionXCoordinate(x)
            sec_ctrl.setPositionYCoordinate(y)
            sec_ctrl.setPositionZCoordinate(z)
          end
        end

      end
    end

    return true
  end

  def update_waterheater_loss_coefficient(model)
    case template
      when '90.1-2004', '90.1-2007', '90.1-2010', '90.1-2013', 'NECB2011'
        model.getWaterHeaterMixeds.sort.each do |water_heater|
          water_heater.setOffCycleLossCoefficienttoAmbientTemperature(7.561562668)
          water_heater.setOnCycleLossCoefficienttoAmbientTemperature(7.561562668)
        end
    end
  end

  def model_custom_swh_tweaks(model, building_type, climate_zone, prototype_input)
    update_waterheater_loss_coefficient(model)

    return true
  end
end