# frozen_string_literal: true
# Copyright (c) 2017-2018 THL A29 Limited, a Tencent company. All Rights Reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
module TencentCloud
module Dasb
module V20191018
# 访问权限
class Acl < TencentCloud::Common::AbstractModel
# @param Id: 访问权限ID
# @type Id: Integer
# @param Name: 访问权限名称
# @type Name: String
# @param AllowDiskRedirect: 是否开启磁盘映射
# @type AllowDiskRedirect: Boolean
# @param AllowClipFileUp: 是否开启剪贴板文件上行
# @type AllowClipFileUp: Boolean
# @param AllowClipFileDown: 是否开启剪贴板文件下行
# @type AllowClipFileDown: Boolean
# @param AllowClipTextUp: 是否开启剪贴板文本（目前含图片）上行
# @type AllowClipTextUp: Boolean
# @param AllowClipTextDown: 是否开启剪贴板文本（目前含图片）下行
# @type AllowClipTextDown: Boolean
# @param AllowFileUp: 是否开启文件传输上传
# @type AllowFileUp: Boolean
# @param MaxFileUpSize: 文件传输上传大小限制（预留参数，暂未启用）
# @type MaxFileUpSize: Integer
# @param AllowFileDown: 是否开启文件传输下载
# @type AllowFileDown: Boolean
# @param MaxFileDownSize: 文件传输下载大小限制（预留参数，暂未启用）
# @type MaxFileDownSize: Integer
# @param AllowAnyAccount: 是否允许任意账号登录
# @type AllowAnyAccount: Boolean
# @param UserSet: 关联的用户列表
# @type UserSet: Array
# @param UserGroupSet: 关联的用户组列表
# @type UserGroupSet: Array
# @param DeviceSet: 关联的资产列表
# @type DeviceSet: Array
# @param DeviceGroupSet: 关联的资产组列表
# @type DeviceGroupSet: Array
# @param AccountSet: 关联的账号列表
# @type AccountSet: Array
# @param CmdTemplateSet: 关联的高危命令模板列表
# @type CmdTemplateSet: Array
# @param AllowDiskFileUp: 是否开启 RDP 磁盘映射文件上传
# @type AllowDiskFileUp: Boolean
# @param AllowDiskFileDown: 是否开启 RDP 磁盘映射文件下载
# @type AllowDiskFileDown: Boolean
# @param AllowShellFileUp: 是否开启 rz sz 文件上传
# @type AllowShellFileUp: Boolean
# @param AllowShellFileDown: 是否开启 rz sz 文件下载
# @type AllowShellFileDown: Boolean
# @param AllowFileDel: 是否开启 SFTP 文件删除
# @type AllowFileDel: Boolean
# @param ValidateFrom: 访问权限生效时间，如:"2021-09-22T00:00:00+00:00"
# 生效、失效时间不填则访问权限长期有效
# @type ValidateFrom: String
# @param ValidateTo: 访问权限失效时间，如:"2021-09-23T00:00:00+00:00"
# 生效、失效时间不填则访问权限长期有效
# @type ValidateTo: String
# @param Status: 访问权限状态，1 - 已生效，2 - 未生效，3 - 已过期
# @type Status: Integer
# @param Department: 所属部门的信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Department: :class:`Tencentcloud::Dasb.v20191018.models.Department`
attr_accessor :Id, :Name, :AllowDiskRedirect, :AllowClipFileUp, :AllowClipFileDown, :AllowClipTextUp, :AllowClipTextDown, :AllowFileUp, :MaxFileUpSize, :AllowFileDown, :MaxFileDownSize, :AllowAnyAccount, :UserSet, :UserGroupSet, :DeviceSet, :DeviceGroupSet, :AccountSet, :CmdTemplateSet, :AllowDiskFileUp, :AllowDiskFileDown, :AllowShellFileUp, :AllowShellFileDown, :AllowFileDel, :ValidateFrom, :ValidateTo, :Status, :Department
def initialize(id=nil, name=nil, allowdiskredirect=nil, allowclipfileup=nil, allowclipfiledown=nil, allowcliptextup=nil, allowcliptextdown=nil, allowfileup=nil, maxfileupsize=nil, allowfiledown=nil, maxfiledownsize=nil, allowanyaccount=nil, userset=nil, usergroupset=nil, deviceset=nil, devicegroupset=nil, accountset=nil, cmdtemplateset=nil, allowdiskfileup=nil, allowdiskfiledown=nil, allowshellfileup=nil, allowshellfiledown=nil, allowfiledel=nil, validatefrom=nil, validateto=nil, status=nil, department=nil)
@Id = id
@Name = name
@AllowDiskRedirect = allowdiskredirect
@AllowClipFileUp = allowclipfileup
@AllowClipFileDown = allowclipfiledown
@AllowClipTextUp = allowcliptextup
@AllowClipTextDown = allowcliptextdown
@AllowFileUp = allowfileup
@MaxFileUpSize = maxfileupsize
@AllowFileDown = allowfiledown
@MaxFileDownSize = maxfiledownsize
@AllowAnyAccount = allowanyaccount
@UserSet = userset
@UserGroupSet = usergroupset
@DeviceSet = deviceset
@DeviceGroupSet = devicegroupset
@AccountSet = accountset
@CmdTemplateSet = cmdtemplateset
@AllowDiskFileUp = allowdiskfileup
@AllowDiskFileDown = allowdiskfiledown
@AllowShellFileUp = allowshellfileup
@AllowShellFileDown = allowshellfiledown
@AllowFileDel = allowfiledel
@ValidateFrom = validatefrom
@ValidateTo = validateto
@Status = status
@Department = department
end
def deserialize(params)
@Id = params['Id']
@Name = params['Name']
@AllowDiskRedirect = params['AllowDiskRedirect']
@AllowClipFileUp = params['AllowClipFileUp']
@AllowClipFileDown = params['AllowClipFileDown']
@AllowClipTextUp = params['AllowClipTextUp']
@AllowClipTextDown = params['AllowClipTextDown']
@AllowFileUp = params['AllowFileUp']
@MaxFileUpSize = params['MaxFileUpSize']
@AllowFileDown = params['AllowFileDown']
@MaxFileDownSize = params['MaxFileDownSize']
@AllowAnyAccount = params['AllowAnyAccount']
unless params['UserSet'].nil?
@UserSet = []
params['UserSet'].each do |i|
user_tmp = User.new
user_tmp.deserialize(i)
@UserSet << user_tmp
end
end
unless params['UserGroupSet'].nil?
@UserGroupSet = []
params['UserGroupSet'].each do |i|
group_tmp = Group.new
group_tmp.deserialize(i)
@UserGroupSet << group_tmp
end
end
unless params['DeviceSet'].nil?
@DeviceSet = []
params['DeviceSet'].each do |i|
device_tmp = Device.new
device_tmp.deserialize(i)
@DeviceSet << device_tmp
end
end
unless params['DeviceGroupSet'].nil?
@DeviceGroupSet = []
params['DeviceGroupSet'].each do |i|
group_tmp = Group.new
group_tmp.deserialize(i)
@DeviceGroupSet << group_tmp
end
end
@AccountSet = params['AccountSet']
unless params['CmdTemplateSet'].nil?
@CmdTemplateSet = []
params['CmdTemplateSet'].each do |i|
cmdtemplate_tmp = CmdTemplate.new
cmdtemplate_tmp.deserialize(i)
@CmdTemplateSet << cmdtemplate_tmp
end
end
@AllowDiskFileUp = params['AllowDiskFileUp']
@AllowDiskFileDown = params['AllowDiskFileDown']
@AllowShellFileUp = params['AllowShellFileUp']
@AllowShellFileDown = params['AllowShellFileDown']
@AllowFileDel = params['AllowFileDel']
@ValidateFrom = params['ValidateFrom']
@ValidateTo = params['ValidateTo']
@Status = params['Status']
unless params['Department'].nil?
@Department = Department.new
@Department.deserialize(params['Department'])
end
end
end
# AddDeviceGroupMembers请求参数结构体
class AddDeviceGroupMembersRequest < TencentCloud::Common::AbstractModel
# @param Id: 资产组ID
# @type Id: Integer
# @param MemberIdSet: 需要添加到资产组的资产ID集合
# @type MemberIdSet: Array
attr_accessor :Id, :MemberIdSet
def initialize(id=nil, memberidset=nil)
@Id = id
@MemberIdSet = memberidset
end
def deserialize(params)
@Id = params['Id']
@MemberIdSet = params['MemberIdSet']
end
end
# AddDeviceGroupMembers返回参数结构体
class AddDeviceGroupMembersResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# AddUserGroupMembers请求参数结构体
class AddUserGroupMembersRequest < TencentCloud::Common::AbstractModel
# @param Id: 用户组ID
# @type Id: Integer
# @param MemberIdSet: 成员用户ID集合
# @type MemberIdSet: Array
attr_accessor :Id, :MemberIdSet
def initialize(id=nil, memberidset=nil)
@Id = id
@MemberIdSet = memberidset
end
def deserialize(params)
@Id = params['Id']
@MemberIdSet = params['MemberIdSet']
end
end
# AddUserGroupMembers返回参数结构体
class AddUserGroupMembersResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# BindDeviceResource请求参数结构体
class BindDeviceResourceRequest < TencentCloud::Common::AbstractModel
# @param DeviceIdSet: 资产ID集合
# @type DeviceIdSet: Array
# @param ResourceId: 堡垒机服务ID
# @type ResourceId: String
attr_accessor :DeviceIdSet, :ResourceId
def initialize(deviceidset=nil, resourceid=nil)
@DeviceIdSet = deviceidset
@ResourceId = resourceid
end
def deserialize(params)
@DeviceIdSet = params['DeviceIdSet']
@ResourceId = params['ResourceId']
end
end
# BindDeviceResource返回参数结构体
class BindDeviceResourceResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# 高危命令模板
class CmdTemplate < TencentCloud::Common::AbstractModel
# @param Id: 高危命令模板ID
# @type Id: Integer
# @param Name: 高危命令模板名称
# @type Name: String
# @param CmdList: 命令列表，命令之间用换行符（"\n"）分隔
# @type CmdList: String
attr_accessor :Id, :Name, :CmdList
def initialize(id=nil, name=nil, cmdlist=nil)
@Id = id
@Name = name
@CmdList = cmdlist
end
def deserialize(params)
@Id = params['Id']
@Name = params['Name']
@CmdList = params['CmdList']
end
end
# CreateAcl请求参数结构体
class CreateAclRequest < TencentCloud::Common::AbstractModel
# @param Name: 权限名称，最大32字符，不能包含空白字符
# @type Name: String
# @param AllowDiskRedirect: 是否开启磁盘映射
# @type AllowDiskRedirect: Boolean
# @param AllowAnyAccount: 是否允许任意账号登录
# @type AllowAnyAccount: Boolean
# @param AllowClipFileUp: 是否开启剪贴板文件上行
# @type AllowClipFileUp: Boolean
# @param AllowClipFileDown: 是否开启剪贴板文件下行
# @type AllowClipFileDown: Boolean
# @param AllowClipTextUp: 是否开启剪贴板文本（含图片）上行
# @type AllowClipTextUp: Boolean
# @param AllowClipTextDown: 是否开启剪贴板文本（含图片）下行
# @type AllowClipTextDown: Boolean
# @param AllowFileUp: 是否开启 SFTP 文件上传
# @type AllowFileUp: Boolean
# @param MaxFileUpSize: 文件传输上传大小限制（预留参数，目前暂未使用）
# @type MaxFileUpSize: Integer
# @param AllowFileDown: 是否开启 SFTP 文件下载
# @type AllowFileDown: Boolean
# @param MaxFileDownSize: 文件传输下载大小限制（预留参数，目前暂未使用）
# @type MaxFileDownSize: Integer
# @param UserIdSet: 关联的用户ID集合
# @type UserIdSet: Array
# @param UserGroupIdSet: 关联的用户组ID
# @type UserGroupIdSet: Array
# @param DeviceIdSet: 关联的资产ID集合
# @type DeviceIdSet: Array
# @param DeviceGroupIdSet: 关联的资产组ID
# @type DeviceGroupIdSet: Array
# @param AccountSet: 关联的账号
# @type AccountSet: Array
# @param CmdTemplateIdSet: 关联的高危命令模板ID
# @type CmdTemplateIdSet: Array
# @param AllowDiskFileUp: 是否开启rdp磁盘映射文件上传
# @type AllowDiskFileUp: Boolean
# @param AllowDiskFileDown: 是否开启rdp磁盘映射文件下载
# @type AllowDiskFileDown: Boolean
# @param AllowShellFileUp: 是否开启rz sz文件上传
# @type AllowShellFileUp: Boolean
# @param AllowShellFileDown: 是否开启rz sz文件下载
# @type AllowShellFileDown: Boolean
# @param AllowFileDel: 是否开启 SFTP 文件删除
# @type AllowFileDel: Boolean
# @param ValidateFrom: 访问权限生效时间，如:"2021-09-22T00:00:00+00:00"
# 生效、失效时间不填则访问权限长期有效
# @type ValidateFrom: String
# @param ValidateTo: 访问权限失效时间，如:"2021-09-23T00:00:00+00:00"
# 生效、失效时间不填则访问权限长期有效
# @type ValidateTo: String
# @param DepartmentId: 访问权限所属部门的ID
# @type DepartmentId: String
attr_accessor :Name, :AllowDiskRedirect, :AllowAnyAccount, :AllowClipFileUp, :AllowClipFileDown, :AllowClipTextUp, :AllowClipTextDown, :AllowFileUp, :MaxFileUpSize, :AllowFileDown, :MaxFileDownSize, :UserIdSet, :UserGroupIdSet, :DeviceIdSet, :DeviceGroupIdSet, :AccountSet, :CmdTemplateIdSet, :AllowDiskFileUp, :AllowDiskFileDown, :AllowShellFileUp, :AllowShellFileDown, :AllowFileDel, :ValidateFrom, :ValidateTo, :DepartmentId
def initialize(name=nil, allowdiskredirect=nil, allowanyaccount=nil, allowclipfileup=nil, allowclipfiledown=nil, allowcliptextup=nil, allowcliptextdown=nil, allowfileup=nil, maxfileupsize=nil, allowfiledown=nil, maxfiledownsize=nil, useridset=nil, usergroupidset=nil, deviceidset=nil, devicegroupidset=nil, accountset=nil, cmdtemplateidset=nil, allowdiskfileup=nil, allowdiskfiledown=nil, allowshellfileup=nil, allowshellfiledown=nil, allowfiledel=nil, validatefrom=nil, validateto=nil, departmentid=nil)
@Name = name
@AllowDiskRedirect = allowdiskredirect
@AllowAnyAccount = allowanyaccount
@AllowClipFileUp = allowclipfileup
@AllowClipFileDown = allowclipfiledown
@AllowClipTextUp = allowcliptextup
@AllowClipTextDown = allowcliptextdown
@AllowFileUp = allowfileup
@MaxFileUpSize = maxfileupsize
@AllowFileDown = allowfiledown
@MaxFileDownSize = maxfiledownsize
@UserIdSet = useridset
@UserGroupIdSet = usergroupidset
@DeviceIdSet = deviceidset
@DeviceGroupIdSet = devicegroupidset
@AccountSet = accountset
@CmdTemplateIdSet = cmdtemplateidset
@AllowDiskFileUp = allowdiskfileup
@AllowDiskFileDown = allowdiskfiledown
@AllowShellFileUp = allowshellfileup
@AllowShellFileDown = allowshellfiledown
@AllowFileDel = allowfiledel
@ValidateFrom = validatefrom
@ValidateTo = validateto
@DepartmentId = departmentid
end
def deserialize(params)
@Name = params['Name']
@AllowDiskRedirect = params['AllowDiskRedirect']
@AllowAnyAccount = params['AllowAnyAccount']
@AllowClipFileUp = params['AllowClipFileUp']
@AllowClipFileDown = params['AllowClipFileDown']
@AllowClipTextUp = params['AllowClipTextUp']
@AllowClipTextDown = params['AllowClipTextDown']
@AllowFileUp = params['AllowFileUp']
@MaxFileUpSize = params['MaxFileUpSize']
@AllowFileDown = params['AllowFileDown']
@MaxFileDownSize = params['MaxFileDownSize']
@UserIdSet = params['UserIdSet']
@UserGroupIdSet = params['UserGroupIdSet']
@DeviceIdSet = params['DeviceIdSet']
@DeviceGroupIdSet = params['DeviceGroupIdSet']
@AccountSet = params['AccountSet']
@CmdTemplateIdSet = params['CmdTemplateIdSet']
@AllowDiskFileUp = params['AllowDiskFileUp']
@AllowDiskFileDown = params['AllowDiskFileDown']
@AllowShellFileUp = params['AllowShellFileUp']
@AllowShellFileDown = params['AllowShellFileDown']
@AllowFileDel = params['AllowFileDel']
@ValidateFrom = params['ValidateFrom']
@ValidateTo = params['ValidateTo']
@DepartmentId = params['DepartmentId']
end
end
# CreateAcl返回参数结构体
class CreateAclResponse < TencentCloud::Common::AbstractModel
# @param Id: 新建成功的访问权限ID
# @type Id: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Id, :RequestId
def initialize(id=nil, requestid=nil)
@Id = id
@RequestId = requestid
end
def deserialize(params)
@Id = params['Id']
@RequestId = params['RequestId']
end
end
# CreateDeviceGroup请求参数结构体
class CreateDeviceGroupRequest < TencentCloud::Common::AbstractModel
# @param Name: 资产组名，最大长度32字符
# @type Name: String
# @param DepartmentId: 资产组所属部门ID，如：1.2.3
# @type DepartmentId: String
attr_accessor :Name, :DepartmentId
def initialize(name=nil, departmentid=nil)
@Name = name
@DepartmentId = departmentid
end
def deserialize(params)
@Name = params['Name']
@DepartmentId = params['DepartmentId']
end
end
# CreateDeviceGroup返回参数结构体
class CreateDeviceGroupResponse < TencentCloud::Common::AbstractModel
# @param Id: 新建成功的资产组ID
# @type Id: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Id, :RequestId
def initialize(id=nil, requestid=nil)
@Id = id
@RequestId = requestid
end
def deserialize(params)
@Id = params['Id']
@RequestId = params['RequestId']
end
end
# CreateUserGroup请求参数结构体
class CreateUserGroupRequest < TencentCloud::Common::AbstractModel
# @param Name: 用户组名，最大长度32字符
# @type Name: String
# @param DepartmentId: 用户组所属部门的ID，如：1.2.3
# @type DepartmentId: String
attr_accessor :Name, :DepartmentId
def initialize(name=nil, departmentid=nil)
@Name = name
@DepartmentId = departmentid
end
def deserialize(params)
@Name = params['Name']
@DepartmentId = params['DepartmentId']
end
end
# CreateUserGroup返回参数结构体
class CreateUserGroupResponse < TencentCloud::Common::AbstractModel
# @param Id: 新建成功的用户组ID
# @type Id: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Id, :RequestId
def initialize(id=nil, requestid=nil)
@Id = id
@RequestId = requestid
end
def deserialize(params)
@Id = params['Id']
@RequestId = params['RequestId']
end
end
# CreateUser请求参数结构体
class CreateUserRequest < TencentCloud::Common::AbstractModel
# @param UserName: 用户名, 3-20个字符, 必须以英文字母开头，且不能包含字母、数字、.、_、-以外的字符
# @type UserName: String
# @param RealName: 用户姓名，最大长度20个字符，不能包含空白字符
# @type RealName: String
# @param Phone: 大陆手机号直接填写，如果是其他国家、地区号码， 按照"国家地区代码|手机号"的格式输入。如: "+852|xxxxxxxx"
# @type Phone: String
# @param Email: 电子邮件
# @type Email: String
# @param ValidateFrom: 用户生效时间，如:"2021-09-22T00:00:00+00:00"
# 生效、失效时间不填则用户长期有效
# @type ValidateFrom: String
# @param ValidateTo: 用户失效时间，如:"2021-09-23T00:00:00+00:00"
# 生效、失效时间不填则用户长期有效
# @type ValidateTo: String
# @param GroupIdSet: 所属用户组ID集合
# @type GroupIdSet: Array
# @param AuthType: 认证方式，0 - 本地， 1 - LDAP， 2 - OAuth 不传则默认为0
# @type AuthType: Integer
# @param ValidateTime: 访问时间段限制， 由0、1组成的字符串，长度168(7 × 24)，代表该用户在一周中允许访问的时间段。字符串中第N个字符代表在一周中的第N个小时， 0 - 代表不允许访问，1 - 代表允许访问
# @type ValidateTime: String
# @param DepartmentId: 所属部门ID，如：“1.2.3”
# @type DepartmentId: String
attr_accessor :UserName, :RealName, :Phone, :Email, :ValidateFrom, :ValidateTo, :GroupIdSet, :AuthType, :ValidateTime, :DepartmentId
def initialize(username=nil, realname=nil, phone=nil, email=nil, validatefrom=nil, validateto=nil, groupidset=nil, authtype=nil, validatetime=nil, departmentid=nil)
@UserName = username
@RealName = realname
@Phone = phone
@Email = email
@ValidateFrom = validatefrom
@ValidateTo = validateto
@GroupIdSet = groupidset
@AuthType = authtype
@ValidateTime = validatetime
@DepartmentId = departmentid
end
def deserialize(params)
@UserName = params['UserName']
@RealName = params['RealName']
@Phone = params['Phone']
@Email = params['Email']
@ValidateFrom = params['ValidateFrom']
@ValidateTo = params['ValidateTo']
@GroupIdSet = params['GroupIdSet']
@AuthType = params['AuthType']
@ValidateTime = params['ValidateTime']
@DepartmentId = params['DepartmentId']
end
end
# CreateUser返回参数结构体
class CreateUserResponse < TencentCloud::Common::AbstractModel
# @param Id: 新建用户的ID
# @type Id: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Id, :RequestId
def initialize(id=nil, requestid=nil)
@Id = id
@RequestId = requestid
end
def deserialize(params)
@Id = params['Id']
@RequestId = params['RequestId']
end
end
# DeleteAcls请求参数结构体
class DeleteAclsRequest < TencentCloud::Common::AbstractModel
# @param IdSet: 待删除的权限ID集合
# @type IdSet: Array
attr_accessor :IdSet
def initialize(idset=nil)
@IdSet = idset
end
def deserialize(params)
@IdSet = params['IdSet']
end
end
# DeleteAcls返回参数结构体
class DeleteAclsResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteDeviceGroupMembers请求参数结构体
class DeleteDeviceGroupMembersRequest < TencentCloud::Common::AbstractModel
# @param Id: 资产组ID
# @type Id: Integer
# @param MemberIdSet: 需要删除的资产ID集合
# @type MemberIdSet: Array
attr_accessor :Id, :MemberIdSet
def initialize(id=nil, memberidset=nil)
@Id = id
@MemberIdSet = memberidset
end
def deserialize(params)
@Id = params['Id']
@MemberIdSet = params['MemberIdSet']
end
end
# DeleteDeviceGroupMembers返回参数结构体
class DeleteDeviceGroupMembersResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteDeviceGroups请求参数结构体
class DeleteDeviceGroupsRequest < TencentCloud::Common::AbstractModel
# @param IdSet: 待删除的资产组ID集合
# @type IdSet: Array
attr_accessor :IdSet
def initialize(idset=nil)
@IdSet = idset
end
def deserialize(params)
@IdSet = params['IdSet']
end
end
# DeleteDeviceGroups返回参数结构体
class DeleteDeviceGroupsResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteUserGroupMembers请求参数结构体
class DeleteUserGroupMembersRequest < TencentCloud::Common::AbstractModel
# @param Id: 用户组ID
# @type Id: Integer
# @param MemberIdSet: 需删除的成员用户ID集合
# @type MemberIdSet: Array
attr_accessor :Id, :MemberIdSet
def initialize(id=nil, memberidset=nil)
@Id = id
@MemberIdSet = memberidset
end
def deserialize(params)
@Id = params['Id']
@MemberIdSet = params['MemberIdSet']
end
end
# DeleteUserGroupMembers返回参数结构体
class DeleteUserGroupMembersResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteUserGroups请求参数结构体
class DeleteUserGroupsRequest < TencentCloud::Common::AbstractModel
# @param IdSet: 待删除的用户组ID集合
# @type IdSet: Array
attr_accessor :IdSet
def initialize(idset=nil)
@IdSet = idset
end
def deserialize(params)
@IdSet = params['IdSet']
end
end
# DeleteUserGroups返回参数结构体
class DeleteUserGroupsResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteUsers请求参数结构体
class DeleteUsersRequest < TencentCloud::Common::AbstractModel
# @param IdSet: 待删除的用户ID集合
# @type IdSet: Array
attr_accessor :IdSet
def initialize(idset=nil)
@IdSet = idset
end
def deserialize(params)
@IdSet = params['IdSet']
end
end
# DeleteUsers返回参数结构体
class DeleteUsersResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# 部门信息
class Department < TencentCloud::Common::AbstractModel
# @param Id: 部门ID
# @type Id: String
# @param Name: 部门名称，1 - 256个字符
# @type Name: String
# @param Managers: 部门管理员账号ID
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Managers: Array
attr_accessor :Id, :Name, :Managers
def initialize(id=nil, name=nil, managers=nil)
@Id = id
@Name = name
@Managers = managers
end
def deserialize(params)
@Id = params['Id']
@Name = params['Name']
@Managers = params['Managers']
end
end
# DescribeAcls请求参数结构体
class DescribeAclsRequest < TencentCloud::Common::AbstractModel
# @param IdSet: 访问权限ID集合
# @type IdSet: Array
# @param Name: 访问权限名称，模糊查询，最长64字符
# @type Name: String
# @param Offset: 分页偏移位置，默认值为0
# @type Offset: Integer
# @param Limit: 每页条目数量，默认20，最大500
# @type Limit: Integer
# @param Exact: 是否根据Name进行精确查询，默认值false
# @type Exact: Boolean
# @param AuthorizedUserIdSet: 有访问权限的用户ID集合
# @type AuthorizedUserIdSet: Array
# @param AuthorizedDeviceIdSet: 有访问权限的资产ID集合
# @type AuthorizedDeviceIdSet: Array
# @param Status: 访问权限状态，1 - 已生效，2 - 未生效，3 - 已过期
# @type Status: Integer
# @param DepartmentId: 部门ID，用于过滤属于某个部门的访问权限
# @type DepartmentId: String
attr_accessor :IdSet, :Name, :Offset, :Limit, :Exact, :AuthorizedUserIdSet, :AuthorizedDeviceIdSet, :Status, :DepartmentId
def initialize(idset=nil, name=nil, offset=nil, limit=nil, exact=nil, authorizeduseridset=nil, authorizeddeviceidset=nil, status=nil, departmentid=nil)
@IdSet = idset
@Name = name
@Offset = offset
@Limit = limit
@Exact = exact
@AuthorizedUserIdSet = authorizeduseridset
@AuthorizedDeviceIdSet = authorizeddeviceidset
@Status = status
@DepartmentId = departmentid
end
def deserialize(params)
@IdSet = params['IdSet']
@Name = params['Name']
@Offset = params['Offset']
@Limit = params['Limit']
@Exact = params['Exact']
@AuthorizedUserIdSet = params['AuthorizedUserIdSet']
@AuthorizedDeviceIdSet = params['AuthorizedDeviceIdSet']
@Status = params['Status']
@DepartmentId = params['DepartmentId']
end
end
# DescribeAcls返回参数结构体
class DescribeAclsResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 访问权限总数
# @type TotalCount: Integer
# @param AclSet: 访问权限列表
# @type AclSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :AclSet, :RequestId
def initialize(totalcount=nil, aclset=nil, requestid=nil)
@TotalCount = totalcount
@AclSet = aclset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['AclSet'].nil?
@AclSet = []
params['AclSet'].each do |i|
acl_tmp = Acl.new
acl_tmp.deserialize(i)
@AclSet << acl_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeDasbImageIds请求参数结构体
class DescribeDasbImageIdsRequest < TencentCloud::Common::AbstractModel
def initialize()
end
def deserialize(params)
end
end
# DescribeDasbImageIds返回参数结构体
class DescribeDasbImageIdsResponse < TencentCloud::Common::AbstractModel
# @param BaseImageId: 基础镜像ID
# @type BaseImageId: String
# @param AiImageId: AI镜像ID
# @type AiImageId: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :BaseImageId, :AiImageId, :RequestId
def initialize(baseimageid=nil, aiimageid=nil, requestid=nil)
@BaseImageId = baseimageid
@AiImageId = aiimageid
@RequestId = requestid
end
def deserialize(params)
@BaseImageId = params['BaseImageId']
@AiImageId = params['AiImageId']
@RequestId = params['RequestId']
end
end
# DescribeDeviceGroupMembers请求参数结构体
class DescribeDeviceGroupMembersRequest < TencentCloud::Common::AbstractModel
# @param Id: 资产组ID
# @type Id: Integer
# @param Bound: true - 查询已在该资产组的资产，false - 查询未在该资产组的资产
# @type Bound: Boolean
# @param Name: 资产名或资产IP，模糊查询
# @type Name: String
# @param Offset: 分页偏移位置，默认值为0
# @type Offset: Integer
# @param Limit: 每页条目数，默认20, 最大500
# @type Limit: Integer
# @param Kind: 资产类型，1 - Linux，2 - Windows，3 - MySQL，4 - SQLServer
# @type Kind: Integer
# @param DepartmentId: 所属部门ID
# @type DepartmentId: String
# @param TagFilters: 过滤条件，可按照标签键、标签进行过滤。如果同时指定标签键和标签过滤条件，它们之间为“AND”的关系
# @type TagFilters: Array
attr_accessor :Id, :Bound, :Name, :Offset, :Limit, :Kind, :DepartmentId, :TagFilters
def initialize(id=nil, bound=nil, name=nil, offset=nil, limit=nil, kind=nil, departmentid=nil, tagfilters=nil)
@Id = id
@Bound = bound
@Name = name
@Offset = offset
@Limit = limit
@Kind = kind
@DepartmentId = departmentid
@TagFilters = tagfilters
end
def deserialize(params)
@Id = params['Id']
@Bound = params['Bound']
@Name = params['Name']
@Offset = params['Offset']
@Limit = params['Limit']
@Kind = params['Kind']
@DepartmentId = params['DepartmentId']
unless params['TagFilters'].nil?
@TagFilters = []
params['TagFilters'].each do |i|
tagfilter_tmp = TagFilter.new
tagfilter_tmp.deserialize(i)
@TagFilters << tagfilter_tmp
end
end
end
end
# DescribeDeviceGroupMembers返回参数结构体
class DescribeDeviceGroupMembersResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 资产组成员总数
# @type TotalCount: Integer
# @param DeviceSet: 资产组成员列表
# @type DeviceSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :DeviceSet, :RequestId
def initialize(totalcount=nil, deviceset=nil, requestid=nil)
@TotalCount = totalcount
@DeviceSet = deviceset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['DeviceSet'].nil?
@DeviceSet = []
params['DeviceSet'].each do |i|
device_tmp = Device.new
device_tmp.deserialize(i)
@DeviceSet << device_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeDeviceGroups请求参数结构体
class DescribeDeviceGroupsRequest < TencentCloud::Common::AbstractModel
# @param IdSet: 资产组ID集合
# @type IdSet: Array
# @param Name: 资产组名，最长64个字符，模糊查询
# @type Name: String
# @param Offset: 分页偏移位置，默认值为0
# @type Offset: Integer
# @param Limit: 每页条目数量，缺省20，最大500
# @type Limit: Integer
# @param DepartmentId: 部门ID，用于过滤属于某个部门的资产组
# @type DepartmentId: String
attr_accessor :IdSet, :Name, :Offset, :Limit, :DepartmentId
def initialize(idset=nil, name=nil, offset=nil, limit=nil, departmentid=nil)
@IdSet = idset
@Name = name
@Offset = offset
@Limit = limit
@DepartmentId = departmentid
end
def deserialize(params)
@IdSet = params['IdSet']
@Name = params['Name']
@Offset = params['Offset']
@Limit = params['Limit']
@DepartmentId = params['DepartmentId']
end
end
# DescribeDeviceGroups返回参数结构体
class DescribeDeviceGroupsResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 资产组总数
# @type TotalCount: Integer
# @param GroupSet: 资产组列表
# @type GroupSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :GroupSet, :RequestId
def initialize(totalcount=nil, groupset=nil, requestid=nil)
@TotalCount = totalcount
@GroupSet = groupset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['GroupSet'].nil?
@GroupSet = []
params['GroupSet'].each do |i|
group_tmp = Group.new
group_tmp.deserialize(i)
@GroupSet << group_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeDevices请求参数结构体
class DescribeDevicesRequest < TencentCloud::Common::AbstractModel
# @param IdSet: 资产ID集合
# @type IdSet: Array
# @param Name: 资产名或资产IP，模糊查询
# @type Name: String
# @param Ip: 暂未使用
# @type Ip: String
# @param ApCodeSet: 地域码集合
# @type ApCodeSet: Array
# @param Kind: 操作系统类型, 1 - Linux, 2 - Windows, 3 - MySQL, 4 - SQLServer
# @type Kind: Integer
# @param Offset: 分页偏移位置，默认值为0
# @type Offset: Integer
# @param Limit: 每页条目数量，默认20
# @type Limit: Integer
# @param AuthorizedUserIdSet: 有该资产访问权限的用户ID集合
# @type AuthorizedUserIdSet: Array
# @param ResourceIdSet: 过滤条件，资产绑定的堡垒机服务ID集合
# @type ResourceIdSet: Array
# @param KindSet: 可提供按照多种类型过滤, 1 - Linux, 2 - Windows, 3 - MySQL, 4 - SQLServer
# @type KindSet: Array
# @param DepartmentId: 过滤条件，可按照部门ID进行过滤
# @type DepartmentId: String
# @param TagFilters: 过滤条件，可按照标签键、标签进行过滤。如果同时指定标签键和标签过滤条件，它们之间为“AND”的关系
# @type TagFilters: Array
attr_accessor :IdSet, :Name, :Ip, :ApCodeSet, :Kind, :Offset, :Limit, :AuthorizedUserIdSet, :ResourceIdSet, :KindSet, :DepartmentId, :TagFilters
def initialize(idset=nil, name=nil, ip=nil, apcodeset=nil, kind=nil, offset=nil, limit=nil, authorizeduseridset=nil, resourceidset=nil, kindset=nil, departmentid=nil, tagfilters=nil)
@IdSet = idset
@Name = name
@Ip = ip
@ApCodeSet = apcodeset
@Kind = kind
@Offset = offset
@Limit = limit
@AuthorizedUserIdSet = authorizeduseridset
@ResourceIdSet = resourceidset
@KindSet = kindset
@DepartmentId = departmentid
@TagFilters = tagfilters
end
def deserialize(params)
@IdSet = params['IdSet']
@Name = params['Name']
@Ip = params['Ip']
@ApCodeSet = params['ApCodeSet']
@Kind = params['Kind']
@Offset = params['Offset']
@Limit = params['Limit']
@AuthorizedUserIdSet = params['AuthorizedUserIdSet']
@ResourceIdSet = params['ResourceIdSet']
@KindSet = params['KindSet']
@DepartmentId = params['DepartmentId']
unless params['TagFilters'].nil?
@TagFilters = []
params['TagFilters'].each do |i|
tagfilter_tmp = TagFilter.new
tagfilter_tmp.deserialize(i)
@TagFilters << tagfilter_tmp
end
end
end
end
# DescribeDevices返回参数结构体
class DescribeDevicesResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 资产总数
# @type TotalCount: Integer
# @param DeviceSet: 资产信息列表
# @type DeviceSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :DeviceSet, :RequestId
def initialize(totalcount=nil, deviceset=nil, requestid=nil)
@TotalCount = totalcount
@DeviceSet = deviceset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['DeviceSet'].nil?
@DeviceSet = []
params['DeviceSet'].each do |i|
device_tmp = Device.new
device_tmp.deserialize(i)
@DeviceSet << device_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeResources请求参数结构体
class DescribeResourcesRequest < TencentCloud::Common::AbstractModel
# @param ApCode: 地域码, 如: ap-guangzhou
# @type ApCode: String
# @param VpcId: 按照堡垒机开通的 VPC 实例ID查询
# @type VpcId: String
# @param ResourceIds: 资源ID集合，当传入ID集合时忽略 ApCode 和 VpcId
# @type ResourceIds: Array
attr_accessor :ApCode, :VpcId, :ResourceIds
def initialize(apcode=nil, vpcid=nil, resourceids=nil)
@ApCode = apcode
@VpcId = vpcid
@ResourceIds = resourceids
end
def deserialize(params)
@ApCode = params['ApCode']
@VpcId = params['VpcId']
@ResourceIds = params['ResourceIds']
end
end
# DescribeResources返回参数结构体
class DescribeResourcesResponse < TencentCloud::Common::AbstractModel
# @param ResourceSet: 堡垒机资源列表
# @type ResourceSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :ResourceSet, :RequestId
def initialize(resourceset=nil, requestid=nil)
@ResourceSet = resourceset
@RequestId = requestid
end
def deserialize(params)
unless params['ResourceSet'].nil?
@ResourceSet = []
params['ResourceSet'].each do |i|
resource_tmp = Resource.new
resource_tmp.deserialize(i)
@ResourceSet << resource_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeUserGroupMembers请求参数结构体
class DescribeUserGroupMembersRequest < TencentCloud::Common::AbstractModel
# @param Id: 用户组ID
# @type Id: Integer
# @param Bound: true - 查询已添加到该用户组的用户，false - 查询未添加到该用户组的用户
# @type Bound: Boolean
# @param Name: 用户名或用户姓名，最长64个字符，模糊查询
# @type Name: String
# @param Offset: 分页偏移位置，默认值为0
# @type Offset: Integer
# @param Limit: 每页条目数量，默认20, 最大500
# @type Limit: Integer
# @param DepartmentId: 所属部门ID
# @type DepartmentId: String
attr_accessor :Id, :Bound, :Name, :Offset, :Limit, :DepartmentId
def initialize(id=nil, bound=nil, name=nil, offset=nil, limit=nil, departmentid=nil)
@Id = id
@Bound = bound
@Name = name
@Offset = offset
@Limit = limit
@DepartmentId = departmentid
end
def deserialize(params)
@Id = params['Id']
@Bound = params['Bound']
@Name = params['Name']
@Offset = params['Offset']
@Limit = params['Limit']
@DepartmentId = params['DepartmentId']
end
end
# DescribeUserGroupMembers返回参数结构体
class DescribeUserGroupMembersResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 用户组成员总数
# @type TotalCount: Integer
# @param UserSet: 用户组成员列表
# @type UserSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :UserSet, :RequestId
def initialize(totalcount=nil, userset=nil, requestid=nil)
@TotalCount = totalcount
@UserSet = userset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['UserSet'].nil?
@UserSet = []
params['UserSet'].each do |i|
user_tmp = User.new
user_tmp.deserialize(i)
@UserSet << user_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeUserGroups请求参数结构体
class DescribeUserGroupsRequest < TencentCloud::Common::AbstractModel
# @param IdSet: 用户组ID集合
# @type IdSet: Array
# @param Name: 用户组名，模糊查询,长度：0-64字符
# @type Name: String
# @param Offset: 分页偏移位置，默认值为0
# @type Offset: Integer
# @param Limit: 每页条目数量，缺省20，最大500
# @type Limit: Integer
# @param DepartmentId: 部门ID，用于过滤属于某个部门的用户组
# @type DepartmentId: String
attr_accessor :IdSet, :Name, :Offset, :Limit, :DepartmentId
def initialize(idset=nil, name=nil, offset=nil, limit=nil, departmentid=nil)
@IdSet = idset
@Name = name
@Offset = offset
@Limit = limit
@DepartmentId = departmentid
end
def deserialize(params)
@IdSet = params['IdSet']
@Name = params['Name']
@Offset = params['Offset']
@Limit = params['Limit']
@DepartmentId = params['DepartmentId']
end
end
# DescribeUserGroups返回参数结构体
class DescribeUserGroupsResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 用户组总数
# @type TotalCount: Integer
# @param GroupSet: 用户组列表
# @type GroupSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :GroupSet, :RequestId
def initialize(totalcount=nil, groupset=nil, requestid=nil)
@TotalCount = totalcount
@GroupSet = groupset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['GroupSet'].nil?
@GroupSet = []
params['GroupSet'].each do |i|
group_tmp = Group.new
group_tmp.deserialize(i)
@GroupSet << group_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeUsers请求参数结构体
class DescribeUsersRequest < TencentCloud::Common::AbstractModel
# @param IdSet: 如果IdSet不为空，则忽略其他参数
# @type IdSet: Array
# @param Name: 模糊查询，IdSet、UserName、Phone为空时才生效，对用户名和姓名进行模糊查询
# @type Name: String
# @param Offset: 分页偏移位置，默认值为0
# @type Offset: Integer
# @param Limit: 每页条目数量，默认20, 最大500
# @type Limit: Integer
# @param UserName: 精确查询，IdSet为空时才生效
# @type UserName: String
# @param Phone: 精确查询，IdSet、UserName为空时才生效。
# 大陆手机号直接填写，如果是其他国家、地区号码,按照"国家地区代码|手机号"的格式输入。如: "+852|xxxxxxxx"
# @type Phone: String
# @param AuthorizedDeviceIdSet: 查询具有指定资产ID访问权限的用户
# @type AuthorizedDeviceIdSet: Array
# @param AuthTypeSet: 认证方式，0 - 本地, 1 - LDAP, 2 - OAuth, 不传为全部
# @type AuthTypeSet: Array
# @param DepartmentId: 部门ID，用于过滤属于某个部门的用户
# @type DepartmentId: String
attr_accessor :IdSet, :Name, :Offset, :Limit, :UserName, :Phone, :AuthorizedDeviceIdSet, :AuthTypeSet, :DepartmentId
def initialize(idset=nil, name=nil, offset=nil, limit=nil, username=nil, phone=nil, authorizeddeviceidset=nil, authtypeset=nil, departmentid=nil)
@IdSet = idset
@Name = name
@Offset = offset
@Limit = limit
@UserName = username
@Phone = phone
@AuthorizedDeviceIdSet = authorizeddeviceidset
@AuthTypeSet = authtypeset
@DepartmentId = departmentid
end
def deserialize(params)
@IdSet = params['IdSet']
@Name = params['Name']
@Offset = params['Offset']
@Limit = params['Limit']
@UserName = params['UserName']
@Phone = params['Phone']
@AuthorizedDeviceIdSet = params['AuthorizedDeviceIdSet']
@AuthTypeSet = params['AuthTypeSet']
@DepartmentId = params['DepartmentId']
end
end
# DescribeUsers返回参数结构体
class DescribeUsersResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 用户总数
# @type TotalCount: Integer
# @param UserSet: 用户列表
# @type UserSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :UserSet, :RequestId
def initialize(totalcount=nil, userset=nil, requestid=nil)
@TotalCount = totalcount
@UserSet = userset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['UserSet'].nil?
@UserSet = []
params['UserSet'].each do |i|
user_tmp = User.new
user_tmp.deserialize(i)
@UserSet << user_tmp
end
end
@RequestId = params['RequestId']
end
end
# 资产信息
class Device < TencentCloud::Common::AbstractModel
# @param Id: 资产ID
# @type Id: Integer
# @param InstanceId: 实例ID，对应CVM、CDB等实例ID
# @type InstanceId: String
# @param Name: 资产名
# @type Name: String
# @param PublicIp: 公网IP
# @type PublicIp: String
# @param PrivateIp: 内网IP
# @type PrivateIp: String
# @param ApCode: 地域编码
# @type ApCode: String
# @param OsName: 操作系统名称
# @type OsName: String
# @param Kind: 资产类型 1 - Linux, 2 - Windows, 3 - MySQL, 4 - SQLServer
# @type Kind: Integer
# @param Port: 管理端口
# @type Port: Integer
# @param GroupSet: 所属资产组列表
# @type GroupSet: Array
# @param AccountCount: 资产绑定的账号数
# @type AccountCount: Integer
# @param VpcId: VPC ID
# @type VpcId: String
# @param SubnetId: 子网ID
# @type SubnetId: String
# @param Resource: 堡垒机服务信息，注意没有绑定服务时为null
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Resource: :class:`Tencentcloud::Dasb.v20191018.models.Resource`
# @param Department: 资产所属部门
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Department: :class:`Tencentcloud::Dasb.v20191018.models.Department`
attr_accessor :Id, :InstanceId, :Name, :PublicIp, :PrivateIp, :ApCode, :OsName, :Kind, :Port, :GroupSet, :AccountCount, :VpcId, :SubnetId, :Resource, :Department
def initialize(id=nil, instanceid=nil, name=nil, publicip=nil, privateip=nil, apcode=nil, osname=nil, kind=nil, port=nil, groupset=nil, accountcount=nil, vpcid=nil, subnetid=nil, resource=nil, department=nil)
@Id = id
@InstanceId = instanceid
@Name = name
@PublicIp = publicip
@PrivateIp = privateip
@ApCode = apcode
@OsName = osname
@Kind = kind
@Port = port
@GroupSet = groupset
@AccountCount = accountcount
@VpcId = vpcid
@SubnetId = subnetid
@Resource = resource
@Department = department
end
def deserialize(params)
@Id = params['Id']
@InstanceId = params['InstanceId']
@Name = params['Name']
@PublicIp = params['PublicIp']
@PrivateIp = params['PrivateIp']
@ApCode = params['ApCode']
@OsName = params['OsName']
@Kind = params['Kind']
@Port = params['Port']
unless params['GroupSet'].nil?
@GroupSet = []
params['GroupSet'].each do |i|
group_tmp = Group.new
group_tmp.deserialize(i)
@GroupSet << group_tmp
end
end
@AccountCount = params['AccountCount']
@VpcId = params['VpcId']
@SubnetId = params['SubnetId']
unless params['Resource'].nil?
@Resource = Resource.new
@Resource.deserialize(params['Resource'])
end
unless params['Department'].nil?
@Department = Department.new
@Department.deserialize(params['Department'])
end
end
end
# 组信息，用于用户组、主机组
class Group < TencentCloud::Common::AbstractModel
# @param Id: 组ID
# @type Id: Integer
# @param Name: 组名称
# @type Name: String
# @param Department: 所属部门信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Department: :class:`Tencentcloud::Dasb.v20191018.models.Department`
attr_accessor :Id, :Name, :Department
def initialize(id=nil, name=nil, department=nil)
@Id = id
@Name = name
@Department = department
end
def deserialize(params)
@Id = params['Id']
@Name = params['Name']
unless params['Department'].nil?
@Department = Department.new
@Department.deserialize(params['Department'])
end
end
end
# ModifyAcl请求参数结构体
class ModifyAclRequest < TencentCloud::Common::AbstractModel
# @param Name: 访问权限名称，最大32字符，不能包含空白字符
# @type Name: String
# @param AllowDiskRedirect: 是否开启磁盘映射
# @type AllowDiskRedirect: Boolean
# @param AllowAnyAccount: 是否允许任意账号登录
# @type AllowAnyAccount: Boolean
# @param Id: 访问权限ID
# @type Id: Integer
# @param AllowClipFileUp: 是否开启剪贴板文件上行
# @type AllowClipFileUp: Boolean
# @param AllowClipFileDown: 是否开启剪贴板文件下行
# @type AllowClipFileDown: Boolean
# @param AllowClipTextUp: 是否开启剪贴板文本（含图片）上行
# @type AllowClipTextUp: Boolean
# @param AllowClipTextDown: 是否开启剪贴板文本（含图片）下行
# @type AllowClipTextDown: Boolean
# @param AllowFileUp: 是否开启文件传输上传
# @type AllowFileUp: Boolean
# @param MaxFileUpSize: 文件传输上传大小限制（预留参数，目前暂未使用）
# @type MaxFileUpSize: Integer
# @param AllowFileDown: 是否开启文件传输下载
# @type AllowFileDown: Boolean
# @param MaxFileDownSize: 文件传输下载大小限制（预留参数，目前暂未使用）
# @type MaxFileDownSize: Integer
# @param UserIdSet: 关联的用户ID
# @type UserIdSet: Array
# @param UserGroupIdSet: 关联的用户组ID
# @type UserGroupIdSet: Array
# @param DeviceIdSet: 关联的资产ID
# @type DeviceIdSet: Array
# @param DeviceGroupIdSet: 关联的资产组ID
# @type DeviceGroupIdSet: Array
# @param AccountSet: 关联的账号
# @type AccountSet: Array
# @param CmdTemplateIdSet: 关联的高危命令模板ID
# @type CmdTemplateIdSet: Array
# @param AllowDiskFileUp: 是否开启 RDP 磁盘映射文件上传
# @type AllowDiskFileUp: Boolean
# @param AllowDiskFileDown: 是否开启 RDP 磁盘映射文件下载
# @type AllowDiskFileDown: Boolean
# @param AllowShellFileUp: 是否开启rz sz文件上传
# @type AllowShellFileUp: Boolean
# @param AllowShellFileDown: 是否开启rz sz文件下载
# @type AllowShellFileDown: Boolean
# @param AllowFileDel: 是否开启 SFTP 文件删除
# @type AllowFileDel: Boolean
# @param ValidateFrom: 访问权限生效时间，如:"2021-09-22T00:00:00+00:00"
# 生效、失效时间不填则访问权限长期有效
# @type ValidateFrom: String
# @param ValidateTo: 访问权限失效时间，如:"2021-09-23T00:00:00+00:00"
# 生效、失效时间不填则访问权限长期有效
# @type ValidateTo: String
# @param DepartmentId: 权限所属部门的ID，如：1.2.3
# @type DepartmentId: String
attr_accessor :Name, :AllowDiskRedirect, :AllowAnyAccount, :Id, :AllowClipFileUp, :AllowClipFileDown, :AllowClipTextUp, :AllowClipTextDown, :AllowFileUp, :MaxFileUpSize, :AllowFileDown, :MaxFileDownSize, :UserIdSet, :UserGroupIdSet, :DeviceIdSet, :DeviceGroupIdSet, :AccountSet, :CmdTemplateIdSet, :AllowDiskFileUp, :AllowDiskFileDown, :AllowShellFileUp, :AllowShellFileDown, :AllowFileDel, :ValidateFrom, :ValidateTo, :DepartmentId
def initialize(name=nil, allowdiskredirect=nil, allowanyaccount=nil, id=nil, allowclipfileup=nil, allowclipfiledown=nil, allowcliptextup=nil, allowcliptextdown=nil, allowfileup=nil, maxfileupsize=nil, allowfiledown=nil, maxfiledownsize=nil, useridset=nil, usergroupidset=nil, deviceidset=nil, devicegroupidset=nil, accountset=nil, cmdtemplateidset=nil, allowdiskfileup=nil, allowdiskfiledown=nil, allowshellfileup=nil, allowshellfiledown=nil, allowfiledel=nil, validatefrom=nil, validateto=nil, departmentid=nil)
@Name = name
@AllowDiskRedirect = allowdiskredirect
@AllowAnyAccount = allowanyaccount
@Id = id
@AllowClipFileUp = allowclipfileup
@AllowClipFileDown = allowclipfiledown
@AllowClipTextUp = allowcliptextup
@AllowClipTextDown = allowcliptextdown
@AllowFileUp = allowfileup
@MaxFileUpSize = maxfileupsize
@AllowFileDown = allowfiledown
@MaxFileDownSize = maxfiledownsize
@UserIdSet = useridset
@UserGroupIdSet = usergroupidset
@DeviceIdSet = deviceidset
@DeviceGroupIdSet = devicegroupidset
@AccountSet = accountset
@CmdTemplateIdSet = cmdtemplateidset
@AllowDiskFileUp = allowdiskfileup
@AllowDiskFileDown = allowdiskfiledown
@AllowShellFileUp = allowshellfileup
@AllowShellFileDown = allowshellfiledown
@AllowFileDel = allowfiledel
@ValidateFrom = validatefrom
@ValidateTo = validateto
@DepartmentId = departmentid
end
def deserialize(params)
@Name = params['Name']
@AllowDiskRedirect = params['AllowDiskRedirect']
@AllowAnyAccount = params['AllowAnyAccount']
@Id = params['Id']
@AllowClipFileUp = params['AllowClipFileUp']
@AllowClipFileDown = params['AllowClipFileDown']
@AllowClipTextUp = params['AllowClipTextUp']
@AllowClipTextDown = params['AllowClipTextDown']
@AllowFileUp = params['AllowFileUp']
@MaxFileUpSize = params['MaxFileUpSize']
@AllowFileDown = params['AllowFileDown']
@MaxFileDownSize = params['MaxFileDownSize']
@UserIdSet = params['UserIdSet']
@UserGroupIdSet = params['UserGroupIdSet']
@DeviceIdSet = params['DeviceIdSet']
@DeviceGroupIdSet = params['DeviceGroupIdSet']
@AccountSet = params['AccountSet']
@CmdTemplateIdSet = params['CmdTemplateIdSet']
@AllowDiskFileUp = params['AllowDiskFileUp']
@AllowDiskFileDown = params['AllowDiskFileDown']
@AllowShellFileUp = params['AllowShellFileUp']
@AllowShellFileDown = params['AllowShellFileDown']
@AllowFileDel = params['AllowFileDel']
@ValidateFrom = params['ValidateFrom']
@ValidateTo = params['ValidateTo']
@DepartmentId = params['DepartmentId']
end
end
# ModifyAcl返回参数结构体
class ModifyAclResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyUser请求参数结构体
class ModifyUserRequest < TencentCloud::Common::AbstractModel
# @param Id: 用户ID
# @type Id: Integer
# @param RealName: 用户姓名，最大长度20个字符，不能包含空格
# @type RealName: String
# @param Phone: 大陆手机号直接填写，如果是其他国家、地区号码,按照"国家地区代码|手机号"的格式输入。如: "+852|xxxxxxxx"
# @type Phone: String
# @param Email: 电子邮件
# @type Email: String
# @param ValidateFrom: 用户生效时间，如:"2021-09-22T00:00:00+00:00"
# 生效、失效时间不填则用户长期有效
# @type ValidateFrom: String
# @param ValidateTo: 用户失效时间，如:"2021-09-23T00:00:00+00:00"
# 生效、失效时间不填则用户长期有效
# @type ValidateTo: String
# @param GroupIdSet: 所属用户组ID集合
# @type GroupIdSet: Array
# @param AuthType: 认证方式，0 - 本地，1 - LDAP，2 - OAuth 不传则默认为0
# @type AuthType: Integer
# @param ValidateTime: 访问时间段限制， 由0、1组成的字符串，长度168(7 × 24)，代表该用户在一周中允许访问的时间段。字符串中第N个字符代表在一周中的第N个小时， 0 - 代表不允许访问，1 - 代表允许访问
# @type ValidateTime: String
# @param DepartmentId: 用户所属部门的ID，如1.2.3
# @type DepartmentId: String
attr_accessor :Id, :RealName, :Phone, :Email, :ValidateFrom, :ValidateTo, :GroupIdSet, :AuthType, :ValidateTime, :DepartmentId
def initialize(id=nil, realname=nil, phone=nil, email=nil, validatefrom=nil, validateto=nil, groupidset=nil, authtype=nil, validatetime=nil, departmentid=nil)
@Id = id
@RealName = realname
@Phone = phone
@Email = email
@ValidateFrom = validatefrom
@ValidateTo = validateto
@GroupIdSet = groupidset
@AuthType = authtype
@ValidateTime = validatetime
@DepartmentId = departmentid
end
def deserialize(params)
@Id = params['Id']
@RealName = params['RealName']
@Phone = params['Phone']
@Email = params['Email']
@ValidateFrom = params['ValidateFrom']
@ValidateTo = params['ValidateTo']
@GroupIdSet = params['GroupIdSet']
@AuthType = params['AuthType']
@ValidateTime = params['ValidateTime']
@DepartmentId = params['DepartmentId']
end
end
# ModifyUser返回参数结构体
class ModifyUserResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# 堡垒机服务信息
class Resource < TencentCloud::Common::AbstractModel
# @param ResourceId: 服务实例ID，如bh-saas-s3ed4r5e
# @type ResourceId: String
# @param ApCode: 地域编码
# @type ApCode: String
# @param SvArgs: 服务实例规格信息
# @type SvArgs: String
# @param VpcId: VPC ID
# @type VpcId: String
# @param Nodes: 服务规格对应的资产数
# @type Nodes: Integer
# @param RenewFlag: 自动续费标记，0 - 表示默认状态，1 - 表示自动续费，2 - 表示明确不自动续费
# @type RenewFlag: Integer
# @param ExpireTime: 过期时间
# @type ExpireTime: String
# @param Status: 资源状态，0 - 未初始化，1 - 正常，2 - 隔离，3 - 销毁，4 - 初始化失败，5 - 初始化中
# @type Status: Integer
# @param ResourceName: 服务实例名，如T-Sec-堡垒机（SaaS型）
# @type ResourceName: String
# @param Pid: 定价模型ID
# @type Pid: Integer
# @param CreateTime: 资源创建时间
# @type CreateTime: String
# @param ProductCode: 商品码, p_cds_dasb
# @type ProductCode: String
# @param SubProductCode: 子商品码, sp_cds_dasb_bh_saas
# @type SubProductCode: String
# @param Zone: 可用区
# @type Zone: String
# @param Expired: 是否过期，true-过期，false-未过期
# @type Expired: Boolean
# @param Deployed: 是否开通，true-开通，false-未开通
# @type Deployed: Boolean
# @param VpcName: 开通服务的 VPC 名称
# @type VpcName: String
# @param VpcCidrBlock: 开通服务的 VPC 对应的网段
# @type VpcCidrBlock: String
# @param SubnetId: 开通服务的子网ID
# @type SubnetId: String
# @param SubnetName: 开通服务的子网名称
# @type SubnetName: String
# @param CidrBlock: 开通服务的子网网段
# @type CidrBlock: String
# @param PublicIpSet: 外部IP
# @type PublicIpSet: Array
# @param PrivateIpSet: 内部IP
# @type PrivateIpSet: Array
# @param ModuleSet: 服务开通的高级功能列表，如:[DB]
# @type ModuleSet: Array
# @param UsedNodes: 已使用的授权点数
# @type UsedNodes: Integer
# @param ExtendPoints: 扩展点数
# @type ExtendPoints: Integer
# @param PackageBandwidth: 带宽扩展包个数(4M)
# @type PackageBandwidth: Integer
# @param PackageNode: 授权点数扩展包个数(50点)
# @type PackageNode: Integer
attr_accessor :ResourceId, :ApCode, :SvArgs, :VpcId, :Nodes, :RenewFlag, :ExpireTime, :Status, :ResourceName, :Pid, :CreateTime, :ProductCode, :SubProductCode, :Zone, :Expired, :Deployed, :VpcName, :VpcCidrBlock, :SubnetId, :SubnetName, :CidrBlock, :PublicIpSet, :PrivateIpSet, :ModuleSet, :UsedNodes, :ExtendPoints, :PackageBandwidth, :PackageNode
def initialize(resourceid=nil, apcode=nil, svargs=nil, vpcid=nil, nodes=nil, renewflag=nil, expiretime=nil, status=nil, resourcename=nil, pid=nil, createtime=nil, productcode=nil, subproductcode=nil, zone=nil, expired=nil, deployed=nil, vpcname=nil, vpccidrblock=nil, subnetid=nil, subnetname=nil, cidrblock=nil, publicipset=nil, privateipset=nil, moduleset=nil, usednodes=nil, extendpoints=nil, packagebandwidth=nil, packagenode=nil)
@ResourceId = resourceid
@ApCode = apcode
@SvArgs = svargs
@VpcId = vpcid
@Nodes = nodes
@RenewFlag = renewflag
@ExpireTime = expiretime
@Status = status
@ResourceName = resourcename
@Pid = pid
@CreateTime = createtime
@ProductCode = productcode
@SubProductCode = subproductcode
@Zone = zone
@Expired = expired
@Deployed = deployed
@VpcName = vpcname
@VpcCidrBlock = vpccidrblock
@SubnetId = subnetid
@SubnetName = subnetname
@CidrBlock = cidrblock
@PublicIpSet = publicipset
@PrivateIpSet = privateipset
@ModuleSet = moduleset
@UsedNodes = usednodes
@ExtendPoints = extendpoints
@PackageBandwidth = packagebandwidth
@PackageNode = packagenode
end
def deserialize(params)
@ResourceId = params['ResourceId']
@ApCode = params['ApCode']
@SvArgs = params['SvArgs']
@VpcId = params['VpcId']
@Nodes = params['Nodes']
@RenewFlag = params['RenewFlag']
@ExpireTime = params['ExpireTime']
@Status = params['Status']
@ResourceName = params['ResourceName']
@Pid = params['Pid']
@CreateTime = params['CreateTime']
@ProductCode = params['ProductCode']
@SubProductCode = params['SubProductCode']
@Zone = params['Zone']
@Expired = params['Expired']
@Deployed = params['Deployed']
@VpcName = params['VpcName']
@VpcCidrBlock = params['VpcCidrBlock']
@SubnetId = params['SubnetId']
@SubnetName = params['SubnetName']
@CidrBlock = params['CidrBlock']
@PublicIpSet = params['PublicIpSet']
@PrivateIpSet = params['PrivateIpSet']
@ModuleSet = params['ModuleSet']
@UsedNodes = params['UsedNodes']
@ExtendPoints = params['ExtendPoints']
@PackageBandwidth = params['PackageBandwidth']
@PackageNode = params['PackageNode']
end
end
# 资产标签
class TagFilter < TencentCloud::Common::AbstractModel
# @param TagKey: 标签键
# @type TagKey: String
# @param TagValue: 标签值
# @type TagValue: Array
attr_accessor :TagKey, :TagValue
def initialize(tagkey=nil, tagvalue=nil)
@TagKey = tagkey
@TagValue = tagvalue
end
def deserialize(params)
@TagKey = params['TagKey']
@TagValue = params['TagValue']
end
end
# 用户信息
class User < TencentCloud::Common::AbstractModel
# @param UserName: 用户名, 3-20个字符 必须以英文字母开头，且不能包含字母、数字、.、_、-以外的字符
# @type UserName: String
# @param RealName: 用户姓名， 最大20个字符，不能包含空白字符
# @type RealName: String
# @param Phone: 手机号码， 大陆手机号直接填写，如果是其他国家、地区号码,按照"国家地区代码|手机号"的格式输入。如: "+852|xxxxxxxx"
# @type Phone: String
# @param Id: 用户ID
# @type Id: Integer
# @param Email: 电子邮件
# @type Email: String
# @param ValidateFrom: 用户生效时间，如:"2021-09-22T00:00:00+00:00"
# 生效、失效时间不填则用户长期有效
# @type ValidateFrom: String
# @param ValidateTo: 用户失效时间，如:"2021-09-22T00:00:00+00:00"
# 生效、失效时间不填则用户长期有效
# @type ValidateTo: String
# @param GroupSet: 所属用户组列表
# @type GroupSet: Array
# @param AuthType: 认证方式，0 - 本地，1 - LDAP，2 - OAuth
# @type AuthType: Integer
# @param ValidateTime: 访问时间段限制， 由0、1组成的字符串，长度168(7 × 24)，代表该用户在一周中允许访问的时间段。字符串中第N个字符代表在一周中的第N个小时， 0 - 代表不允许访问，1 - 代表允许访问
# @type ValidateTime: String
# @param Department: 用户所属部门（用于出参）
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Department: :class:`Tencentcloud::Dasb.v20191018.models.Department`
# @param DepartmentId: 用户所属部门（用于入参）
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DepartmentId: String
attr_accessor :UserName, :RealName, :Phone, :Id, :Email, :ValidateFrom, :ValidateTo, :GroupSet, :AuthType, :ValidateTime, :Department, :DepartmentId
def initialize(username=nil, realname=nil, phone=nil, id=nil, email=nil, validatefrom=nil, validateto=nil, groupset=nil, authtype=nil, validatetime=nil, department=nil, departmentid=nil)
@UserName = username
@RealName = realname
@Phone = phone
@Id = id
@Email = email
@ValidateFrom = validatefrom
@ValidateTo = validateto
@GroupSet = groupset
@AuthType = authtype
@ValidateTime = validatetime
@Department = department
@DepartmentId = departmentid
end
def deserialize(params)
@UserName = params['UserName']
@RealName = params['RealName']
@Phone = params['Phone']
@Id = params['Id']
@Email = params['Email']
@ValidateFrom = params['ValidateFrom']
@ValidateTo = params['ValidateTo']
unless params['GroupSet'].nil?
@GroupSet = []
params['GroupSet'].each do |i|
group_tmp = Group.new
group_tmp.deserialize(i)
@GroupSet << group_tmp
end
end
@AuthType = params['AuthType']
@ValidateTime = params['ValidateTime']
unless params['Department'].nil?
@Department = Department.new
@Department.deserialize(params['Department'])
end
@DepartmentId = params['DepartmentId']
end
end
end
end
end