# frozen_string_literal: true # Copyright (c) 2017-2018 THL A29 Limited, a Tencent company. All Rights Reserved. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. module TencentCloud module Iotvideo module V20211125 # AI模型申请信息 class AIModelApplication < TencentCloud::Common::AbstractModel # @param ProductId: 产品ID # @type ProductId: String # @param ProductName: 产品名称 # @type ProductName: String # @param Status: 申请状态:1-已申请;2-已取消;3-已拒绝;4-已通过 # @type Status: Integer attr_accessor :ProductId, :ProductName, :Status def initialize(productid=nil, productname=nil, status=nil) @ProductId = productid @ProductName = productname @Status = status end def deserialize(params) @ProductId = params['ProductId'] @ProductName = params['ProductName'] @Status = params['Status'] end end # AI模型信息 class AIModelInfo < TencentCloud::Common::AbstractModel # @param ProductId: 产品ID # @type ProductId: String # @param ProductName: 产品名称 # @type ProductName: String # @param Status: 申请状态:1-已申请;2-已取消;3-已拒绝;4-已通过 # @type Status: Integer # @param Total: 可调用数量 # @type Total: Integer # @param Used: 已调用数量 # @type Used: Integer # @param ApplyTime: 申请时间 # @type ApplyTime: Integer # @param ApprovalTime: 审批通过时间 # @type ApprovalTime: Integer attr_accessor :ProductId, :ProductName, :Status, :Total, :Used, :ApplyTime, :ApprovalTime def initialize(productid=nil, productname=nil, status=nil, total=nil, used=nil, applytime=nil, approvaltime=nil) @ProductId = productid @ProductName = productname @Status = status @Total = total @Used = used @ApplyTime = applytime @ApprovalTime = approvaltime end def deserialize(params) @ProductId = params['ProductId'] @ProductName = params['ProductName'] @Status = params['Status'] @Total = params['Total'] @Used = params['Used'] @ApplyTime = params['ApplyTime'] @ApprovalTime = params['ApprovalTime'] end end # AI模型资源使用信息 class AIModelUsageInfo < TencentCloud::Common::AbstractModel # @param CreateTime: 开通时间 # @type CreateTime: Integer # @param Total: 资源总量 # @type Total: Integer # @param Used: 已使用资源数量 # @type Used: Integer attr_accessor :CreateTime, :Total, :Used def initialize(createtime=nil, total=nil, used=nil) @CreateTime = createtime @Total = total @Used = used end def deserialize(params) @CreateTime = params['CreateTime'] @Total = params['Total'] @Used = params['Used'] end end # 查询设备历史 class ActionHistory < TencentCloud::Common::AbstractModel # @param DeviceName: 设备名称 # @type DeviceName: String # @param ActionId: 动作Id # @type ActionId: String # @param ActionName: 动作名称 # @type ActionName: String # @param ReqTime: 请求时间 # @type ReqTime: Integer # @param RspTime: 响应时间 # @type RspTime: Integer # @param InputParams: 输入参数 # 注意:此字段可能返回 null,表示取不到有效值。 # @type InputParams: String # @param OutputParams: 输出参数 # 注意:此字段可能返回 null,表示取不到有效值。 # @type OutputParams: String # @param Calling: 调用方式 # @type Calling: String # @param ClientToken: 调用Id # @type ClientToken: String # @param Status: 调用状态 # @type Status: String attr_accessor :DeviceName, :ActionId, :ActionName, :ReqTime, :RspTime, :InputParams, :OutputParams, :Calling, :ClientToken, :Status def initialize(devicename=nil, actionid=nil, actionname=nil, reqtime=nil, rsptime=nil, inputparams=nil, outputparams=nil, calling=nil, clienttoken=nil, status=nil) @DeviceName = devicename @ActionId = actionid @ActionName = actionname @ReqTime = reqtime @RspTime = rsptime @InputParams = inputparams @OutputParams = outputparams @Calling = calling @ClientToken = clienttoken @Status = status end def deserialize(params) @DeviceName = params['DeviceName'] @ActionId = params['ActionId'] @ActionName = params['ActionName'] @ReqTime = params['ReqTime'] @RspTime = params['RspTime'] @InputParams = params['InputParams'] @OutputParams = params['OutputParams'] @Calling = params['Calling'] @ClientToken = params['ClientToken'] @Status = params['Status'] end end # ApplyAIModel请求参数结构体 class ApplyAIModelRequest < TencentCloud::Common::AbstractModel # @param ModelId: AI模型ID # @type ModelId: String # @param ProductId: 产品ID # @type ProductId: String attr_accessor :ModelId, :ProductId def initialize(modelid=nil, productid=nil) @ModelId = modelid @ProductId = productid end def deserialize(params) @ModelId = params['ModelId'] @ProductId = params['ProductId'] end end # ApplyAIModel返回参数结构体 class ApplyAIModelResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # 账户流水 class BalanceTransaction < TencentCloud::Common::AbstractModel # @param AccountType: 账户类型:1-设备接入 2-云存。 # @type AccountType: Integer # @param Operation: 账户变更类型:Rechareg-充值;CreateOrder-新购。 # @type Operation: String # @param DealId: 流水ID。 # @type DealId: String # @param Amount: 变更金额,单位:分(人民币)。 # @type Amount: Integer # @param Balance: 变更后账户余额,单位:分(人民币)。 # @type Balance: Integer # @param OperationTime: 变更时间。 # @type OperationTime: Integer attr_accessor :AccountType, :Operation, :DealId, :Amount, :Balance, :OperationTime def initialize(accounttype=nil, operation=nil, dealid=nil, amount=nil, balance=nil, operationtime=nil) @AccountType = accounttype @Operation = operation @DealId = dealid @Amount = amount @Balance = balance @OperationTime = operationtime end def deserialize(params) @AccountType = params['AccountType'] @Operation = params['Operation'] @DealId = params['DealId'] @Amount = params['Amount'] @Balance = params['Balance'] @OperationTime = params['OperationTime'] end end # BatchUpdateFirmware请求参数结构体 class BatchUpdateFirmwareRequest < TencentCloud::Common::AbstractModel # @param ProductID: 产品ID # @type ProductID: String # @param FirmwareVersion: 固件新版本号 # @type FirmwareVersion: String # @param FirmwareOriVersion: 固件原版本号,根据文件列表升级固件不需要填写此参数 # @type FirmwareOriVersion: String # @param UpgradeMethod: 升级方式,0 静默升级 1 用户确认升级。 不填默认为静默升级方式 # @type UpgradeMethod: Integer # @param FileName: 设备列表文件名称,根据文件列表升级固件需要填写此参数 # @type FileName: String # @param FileMd5: 设备列表的文件md5值 # @type FileMd5: String # @param FileSize: 设备列表的文件大小值 # @type FileSize: Integer # @param DeviceNames: 需要升级的设备名称列表 # @type DeviceNames: Array # @param TimeoutInterval: 固件升级任务默认超时时间。 最小取值60秒,最大为3600秒 # @type TimeoutInterval: Integer attr_accessor :ProductID, :FirmwareVersion, :FirmwareOriVersion, :UpgradeMethod, :FileName, :FileMd5, :FileSize, :DeviceNames, :TimeoutInterval def initialize(productid=nil, firmwareversion=nil, firmwareoriversion=nil, upgrademethod=nil, filename=nil, filemd5=nil, filesize=nil, devicenames=nil, timeoutinterval=nil) @ProductID = productid @FirmwareVersion = firmwareversion @FirmwareOriVersion = firmwareoriversion @UpgradeMethod = upgrademethod @FileName = filename @FileMd5 = filemd5 @FileSize = filesize @DeviceNames = devicenames @TimeoutInterval = timeoutinterval end def deserialize(params) @ProductID = params['ProductID'] @FirmwareVersion = params['FirmwareVersion'] @FirmwareOriVersion = params['FirmwareOriVersion'] @UpgradeMethod = params['UpgradeMethod'] @FileName = params['FileName'] @FileMd5 = params['FileMd5'] @FileSize = params['FileSize'] @DeviceNames = params['DeviceNames'] @TimeoutInterval = params['TimeoutInterval'] end end # BatchUpdateFirmware返回参数结构体 class BatchUpdateFirmwareResponse < TencentCloud::Common::AbstractModel # @param TaskId: 任务ID # @type TaskId: Integer # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :TaskId, :RequestId def initialize(taskid=nil, requestid=nil) @TaskId = taskid @RequestId = requestid end def deserialize(params) @TaskId = params['TaskId'] @RequestId = params['RequestId'] end end # BindCloudStorageUser请求参数结构体 class BindCloudStorageUserRequest < TencentCloud::Common::AbstractModel # @param ProductId: 产品ID # @type ProductId: String # @param DeviceName: 设备名称 # @type DeviceName: String # @param UserId: 用户ID # @type UserId: String attr_accessor :ProductId, :DeviceName, :UserId def initialize(productid=nil, devicename=nil, userid=nil) @ProductId = productid @DeviceName = devicename @UserId = userid end def deserialize(params) @ProductId = params['ProductId'] @DeviceName = params['DeviceName'] @UserId = params['UserId'] end end # BindCloudStorageUser返回参数结构体 class BindCloudStorageUserResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # 运营活动资源包信息 class BonusInfo < TencentCloud::Common::AbstractModel # @param BonusId: 资源包ID # @type BonusId: Integer # @param UserId: 用户ID # @type UserId: String # @param PackageId: 资源包配置ID # @type PackageId: String # @param Total: 资源总数 # @type Total: Integer # @param Used: 资源消耗总数 # @type Used: Integer # @param ExpireTime: 资源包过期时间 # @type ExpireTime: Integer # @param CreateTime: 资源包创建时间 # @type CreateTime: Integer attr_accessor :BonusId, :UserId, :PackageId, :Total, :Used, :ExpireTime, :CreateTime def initialize(bonusid=nil, userid=nil, packageid=nil, total=nil, used=nil, expiretime=nil, createtime=nil) @BonusId = bonusid @UserId = userid @PackageId = packageid @Total = total @Used = used @ExpireTime = expiretime @CreateTime = createtime end def deserialize(params) @BonusId = params['BonusId'] @UserId = params['UserId'] @PackageId = params['PackageId'] @Total = params['Total'] @Used = params['Used'] @ExpireTime = params['ExpireTime'] @CreateTime = params['CreateTime'] end end # CallDeviceActionAsync请求参数结构体 class CallDeviceActionAsyncRequest < TencentCloud::Common::AbstractModel # @param ProductId: 产品Id # @type ProductId: String # @param DeviceName: 设备名称 # @type DeviceName: String # @param ActionId: 产品数据模板中行为功能的标识符,由开发者自行根据设备的应用场景定义 # @type ActionId: String # @param InputParams: 输入参数 # @type InputParams: String attr_accessor :ProductId, :DeviceName, :ActionId, :InputParams def initialize(productid=nil, devicename=nil, actionid=nil, inputparams=nil) @ProductId = productid @DeviceName = devicename @ActionId = actionid @InputParams = inputparams end def deserialize(params) @ProductId = params['ProductId'] @DeviceName = params['DeviceName'] @ActionId = params['ActionId'] @InputParams = params['InputParams'] end end # CallDeviceActionAsync返回参数结构体 class CallDeviceActionAsyncResponse < TencentCloud::Common::AbstractModel # @param ClientToken: 调用Id # 注意:此字段可能返回 null,表示取不到有效值。 # @type ClientToken: String # @param Status: 异步调用状态 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Status: String # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :ClientToken, :Status, :RequestId def initialize(clienttoken=nil, status=nil, requestid=nil) @ClientToken = clienttoken @Status = status @RequestId = requestid end def deserialize(params) @ClientToken = params['ClientToken'] @Status = params['Status'] @RequestId = params['RequestId'] end end # CallDeviceActionSync请求参数结构体 class CallDeviceActionSyncRequest < TencentCloud::Common::AbstractModel # @param ProductId: 产品Id # @type ProductId: String # @param DeviceName: 设备名称 # @type DeviceName: String # @param ActionId: 产品数据模板中行为功能的标识符,由开发者自行根据设备的应用场景定义 # @type ActionId: String # @param InputParams: 输入参数 # @type InputParams: String attr_accessor :ProductId, :DeviceName, :ActionId, :InputParams def initialize(productid=nil, devicename=nil, actionid=nil, inputparams=nil) @ProductId = productid @DeviceName = devicename @ActionId = actionid @InputParams = inputparams end def deserialize(params) @ProductId = params['ProductId'] @DeviceName = params['DeviceName'] @ActionId = params['ActionId'] @InputParams = params['InputParams'] end end # CallDeviceActionSync返回参数结构体 class CallDeviceActionSyncResponse < TencentCloud::Common::AbstractModel # @param ClientToken: 调用Id # 注意:此字段可能返回 null,表示取不到有效值。 # @type ClientToken: String # @param OutputParams: 输出参数 # 注意:此字段可能返回 null,表示取不到有效值。 # @type OutputParams: String # @param Status: 返回状态,当设备不在线等部分情况,会通过该 Status 返回。 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Status: String # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :ClientToken, :OutputParams, :Status, :RequestId def initialize(clienttoken=nil, outputparams=nil, status=nil, requestid=nil) @ClientToken = clienttoken @OutputParams = outputparams @Status = status @RequestId = requestid end def deserialize(params) @ClientToken = params['ClientToken'] @OutputParams = params['OutputParams'] @Status = params['Status'] @RequestId = params['RequestId'] end end # CancelAIModelApplication请求参数结构体 class CancelAIModelApplicationRequest < TencentCloud::Common::AbstractModel # @param ModelId: AI模型ID # @type ModelId: String # @param ProductId: 产品ID # @type ProductId: String attr_accessor :ModelId, :ProductId def initialize(modelid=nil, productid=nil) @ModelId = modelid @ProductId = productid end def deserialize(params) @ModelId = params['ModelId'] @ProductId = params['ProductId'] end end # CancelAIModelApplication返回参数结构体 class CancelAIModelApplicationResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # CancelDeviceFirmwareTask请求参数结构体 class CancelDeviceFirmwareTaskRequest < TencentCloud::Common::AbstractModel # @param ProductID: 产品ID # @type ProductID: String # @param DeviceName: 设备名称 # @type DeviceName: String # @param FirmwareVersion: 固件版本号 # @type FirmwareVersion: String # @param TaskId: 固件升级任务ID # @type TaskId: Integer attr_accessor :ProductID, :DeviceName, :FirmwareVersion, :TaskId def initialize(productid=nil, devicename=nil, firmwareversion=nil, taskid=nil) @ProductID = productid @DeviceName = devicename @FirmwareVersion = firmwareversion @TaskId = taskid end def deserialize(params) @ProductID = params['ProductID'] @DeviceName = params['DeviceName'] @FirmwareVersion = params['FirmwareVersion'] @TaskId = params['TaskId'] end end # CancelDeviceFirmwareTask返回参数结构体 class CancelDeviceFirmwareTaskResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # CheckForwardAuth请求参数结构体 class CheckForwardAuthRequest < TencentCloud::Common::AbstractModel # @param Skey: 控制台Skey # @type Skey: String # @param QueueType: 队列类型 0.CMQ 1.Ckafka # @type QueueType: Integer attr_accessor :Skey, :QueueType def initialize(skey=nil, queuetype=nil) @Skey = skey @QueueType = queuetype end def deserialize(params) @Skey = params['Skey'] @QueueType = params['QueueType'] end end # CheckForwardAuth返回参数结构体 class CheckForwardAuthResponse < TencentCloud::Common::AbstractModel # @param Endpoint: 腾讯云账号 # @type Endpoint: String # @param Result: 结果 # @type Result: Integer # @param Productid: 产品ID # @type Productid: String # @param ErrMsg: 错误消息 # @type ErrMsg: String # @param QueueType: 队列类型 0.CMQ 1.Ckafka # @type QueueType: Integer # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Endpoint, :Result, :Productid, :ErrMsg, :QueueType, :RequestId def initialize(endpoint=nil, result=nil, productid=nil, errmsg=nil, queuetype=nil, requestid=nil) @Endpoint = endpoint @Result = result @Productid = productid @ErrMsg = errmsg @QueueType = queuetype @RequestId = requestid end def deserialize(params) @Endpoint = params['Endpoint'] @Result = params['Result'] @Productid = params['Productid'] @ErrMsg = params['ErrMsg'] @QueueType = params['QueueType'] @RequestId = params['RequestId'] end end # 云存事件 class CloudStorageEvent < TencentCloud::Common::AbstractModel # @param StartTime: 事件起始时间(Unix 时间戳,秒级 # @type StartTime: Integer # @param EndTime: 事件结束时间(Unix 时间戳,秒级 # @type EndTime: Integer # @param Thumbnail: 事件缩略图 # @type Thumbnail: String # @param EventId: 事件ID # @type EventId: String attr_accessor :StartTime, :EndTime, :Thumbnail, :EventId def initialize(starttime=nil, endtime=nil, thumbnail=nil, eventid=nil) @StartTime = starttime @EndTime = endtime @Thumbnail = thumbnail @EventId = eventid end def deserialize(params) @StartTime = params['StartTime'] @EndTime = params['EndTime'] @Thumbnail = params['Thumbnail'] @EventId = params['EventId'] end end # 云存时间轴接口返回数据 class CloudStorageTimeData < TencentCloud::Common::AbstractModel # @param TimeList: 云存时间轴信息列表 # @type TimeList: Array # @param VideoURL: 播放地址 # @type VideoURL: String attr_accessor :TimeList, :VideoURL def initialize(timelist=nil, videourl=nil) @TimeList = timelist @VideoURL = videourl end def deserialize(params) unless params['TimeList'].nil? @TimeList = [] params['TimeList'].each do |i| cloudstoragetimeinfo_tmp = CloudStorageTimeInfo.new cloudstoragetimeinfo_tmp.deserialize(i) @TimeList << cloudstoragetimeinfo_tmp end end @VideoURL = params['VideoURL'] end end # 云存时间轴信息 class CloudStorageTimeInfo < TencentCloud::Common::AbstractModel # @param StartTime: 开始时间 # @type StartTime: Integer # @param EndTime: 结束时间 # @type EndTime: Integer attr_accessor :StartTime, :EndTime def initialize(starttime=nil, endtime=nil) @StartTime = starttime @EndTime = endtime end def deserialize(params) @StartTime = params['StartTime'] @EndTime = params['EndTime'] end end # 云存用户信息 class CloudStorageUserInfo < TencentCloud::Common::AbstractModel # @param UserId: 用户ID # @type UserId: String attr_accessor :UserId def initialize(userid=nil) @UserId = userid end def deserialize(params) @UserId = params['UserId'] end end # ControlDeviceData请求参数结构体 class ControlDeviceDataRequest < TencentCloud::Common::AbstractModel # @param ProductId: 产品ID # @type ProductId: String # @param DeviceName: 设备名称 # @type DeviceName: String # @param Data: 属性数据, JSON格式字符串, 注意字段需要在物模型属性里定义 # @type Data: String # @param Method: 请求类型 , 不填该参数或者 desired 表示下发属性给设备, reported 表示模拟设备上报属性 # @type Method: String # @param DataTimestamp: 上报数据UNIX时间戳(毫秒), 仅对Method:reported有效 # @type DataTimestamp: Integer attr_accessor :ProductId, :DeviceName, :Data, :Method, :DataTimestamp def initialize(productid=nil, devicename=nil, data=nil, method=nil, datatimestamp=nil) @ProductId = productid @DeviceName = devicename @Data = data @Method = method @DataTimestamp = datatimestamp end def deserialize(params) @ProductId = params['ProductId'] @DeviceName = params['DeviceName'] @Data = params['Data'] @Method = params['Method'] @DataTimestamp = params['DataTimestamp'] end end # ControlDeviceData返回参数结构体 class ControlDeviceDataResponse < TencentCloud::Common::AbstractModel # @param Data: 返回信息 # @type Data: String # @param Result: JSON字符串, 返回下发控制的结果信息, # Sent = 1 表示设备已经在线并且订阅了控制下发的mqtt topic # 注意:此字段可能返回 null,表示取不到有效值。 # @type Result: String # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Data, :Result, :RequestId def initialize(data=nil, result=nil, requestid=nil) @Data = data @Result = result @RequestId = requestid end def deserialize(params) @Data = params['Data'] @Result = params['Result'] @RequestId = params['RequestId'] end end # CreateAIDetection请求参数结构体 class CreateAIDetectionRequest < TencentCloud::Common::AbstractModel # @param ProductId: 产品ID # @type ProductId: String # @param DeviceName: 设备名称 # @type DeviceName: String # @param ModelId: AI模型ID # @type ModelId: String # @param StartTime: 图片上传的开始时间 # @type StartTime: Integer # @param EndTime: 图片上传的结束时间 # @type EndTime: Integer attr_accessor :ProductId, :DeviceName, :ModelId, :StartTime, :EndTime def initialize(productid=nil, devicename=nil, modelid=nil, starttime=nil, endtime=nil) @ProductId = productid @DeviceName = devicename @ModelId = modelid @StartTime = starttime @EndTime = endtime end def deserialize(params) @ProductId = params['ProductId'] @DeviceName = params['DeviceName'] @ModelId = params['ModelId'] @StartTime = params['StartTime'] @EndTime = params['EndTime'] end end # CreateAIDetection返回参数结构体 class CreateAIDetectionResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # CreateBatch请求参数结构体 class CreateBatchRequest < TencentCloud::Common::AbstractModel # @param ProductId: 产品ID # @type ProductId: String # @param DevNum: 批次创建的设备数量 # @type DevNum: Integer # @param DevPre: 批次创建的设备前缀。不超过24个字符 # @type DevPre: String attr_accessor :ProductId, :DevNum, :DevPre def initialize(productid=nil, devnum=nil, devpre=nil) @ProductId = productid @DevNum = devnum @DevPre = devpre end def deserialize(params) @ProductId = params['ProductId'] @DevNum = params['DevNum'] @DevPre = params['DevPre'] end end # CreateBatch返回参数结构体 class CreateBatchResponse < TencentCloud::Common::AbstractModel # @param BatchId: 批次ID # @type BatchId: Integer # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :BatchId, :RequestId def initialize(batchid=nil, requestid=nil) @BatchId = batchid @RequestId = requestid end def deserialize(params) @BatchId = params['BatchId'] @RequestId = params['RequestId'] end end # CreateCOSCredentials请求参数结构体 class CreateCOSCredentialsRequest < TencentCloud::Common::AbstractModel # @param ProductId: 产品ID # @type ProductId: String # @param DeviceName: 设备名称 # @type DeviceName: String attr_accessor :ProductId, :DeviceName def initialize(productid=nil, devicename=nil) @ProductId = productid @DeviceName = devicename end def deserialize(params) @ProductId = params['ProductId'] @DeviceName = params['DeviceName'] end end # CreateCOSCredentials返回参数结构体 class CreateCOSCredentialsResponse < TencentCloud::Common::AbstractModel # @param StorageBucket: COS存储桶名称 # @type StorageBucket: String # @param StorageRegion: COS存储桶区域 # @type StorageRegion: String # @param StoragePath: COS存储桶路径 # @type StoragePath: String # @param SecretID: COS上传用的SecretID # @type SecretID: String # @param SecretKey: COS上传用的SecretKey # @type SecretKey: String # @param Token: COS上传用的Token # @type Token: String # @param ExpiredTime: 密钥信息过期时间 # @type ExpiredTime: Integer # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :StorageBucket, :StorageRegion, :StoragePath, :SecretID, :SecretKey, :Token, :ExpiredTime, :RequestId def initialize(storagebucket=nil, storageregion=nil, storagepath=nil, secretid=nil, secretkey=nil, token=nil, expiredtime=nil, requestid=nil) @StorageBucket = storagebucket @StorageRegion = storageregion @StoragePath = storagepath @SecretID = secretid @SecretKey = secretkey @Token = token @ExpiredTime = expiredtime @RequestId = requestid end def deserialize(params) @StorageBucket = params['StorageBucket'] @StorageRegion = params['StorageRegion'] @StoragePath = params['StoragePath'] @SecretID = params['SecretID'] @SecretKey = params['SecretKey'] @Token = params['Token'] @ExpiredTime = params['ExpiredTime'] @RequestId = params['RequestId'] end end # CreateCloudStorage请求参数结构体 class CreateCloudStorageRequest < TencentCloud::Common::AbstractModel # @param ProductId: 产品ID # @type ProductId: String # @param DeviceName: 设备名称 # @type DeviceName: String # @param PackageId: 云存套餐ID: # yc1m3d : 全时3天存储月套餐。 # yc1m7d : 全时7天存储月套餐。 # yc1m30d :全时30天存储月套餐。 # yc1y3d :全时3天存储年套餐。 # yc1y7d :全时7天存储年套餐。 # yc1y30d :全时30天存储年套餐。 # ye1m3d :事件3天存储月套餐。 # ye1m7d :事件7天存储月套餐。 # ye1m30d :事件30天存储月套餐 。 # ye1y3d :事件3天存储年套餐。 # ye1y7d :事件7天存储年套餐。 # ye1y30d :事件30天存储年套餐。 # yc1w7d : 全时7天存储周套餐。 # ye1w7d : 事件7天存储周套餐。 # lye1m3d:低功耗事件3天月套餐。 # lye1m7d:低功耗事件7天月套餐。 # lye1m30d:低功耗事件30天月套餐。 # lye1y3d:低功耗事件3天年套餐。 # lye1y7d:低功耗事件7天年套餐。 # lye1y30d:低功耗事件30天年套餐。 # @type PackageId: String # @param Override: 如果当前设备已开启云存套餐,Override=1会使用新套餐覆盖原有套餐。不传此参数则默认为0。 # @type Override: Integer # @param PackageQueue: 套餐列表顺序:PackageQueue=front会立即使用新购买的套餐,新购套餐结束后,列表中下一个未过期的套餐继续生效;PackageQueue=end会等设备当前所有已购买套餐过期后才会生效新购套餐。与Override参数不能同时使用。 # @type PackageQueue: String attr_accessor :ProductId, :DeviceName, :PackageId, :Override, :PackageQueue def initialize(productid=nil, devicename=nil, packageid=nil, override=nil, packagequeue=nil) @ProductId = productid @DeviceName = devicename @PackageId = packageid @Override = override @PackageQueue = packagequeue end def deserialize(params) @ProductId = params['ProductId'] @DeviceName = params['DeviceName'] @PackageId = params['PackageId'] @Override = params['Override'] @PackageQueue = params['PackageQueue'] end end # CreateCloudStorage返回参数结构体 class CreateCloudStorageResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # CreateDataForward请求参数结构体 class CreateDataForwardRequest < TencentCloud::Common::AbstractModel # @param ProductId: 产品ID。 # @type ProductId: String # @param ForwardAddr: 转发地址。如果有鉴权Token,则需要自行传入,例如 [{\"forward\":{\"api\":\"http://123.207.117.108:1080/sub.php\",\"token\":\"testtoken\"}}] # @type ForwardAddr: String # @param DataChose: 1-数据信息转发 2-设备上下线状态转发 3-数据信息转发&设备上下线状态转发 # @type DataChose: Integer attr_accessor :ProductId, :ForwardAddr, :DataChose def initialize(productid=nil, forwardaddr=nil, datachose=nil) @ProductId = productid @ForwardAddr = forwardaddr @DataChose = datachose end def deserialize(params) @ProductId = params['ProductId'] @ForwardAddr = params['ForwardAddr'] @DataChose = params['DataChose'] end end # CreateDataForward返回参数结构体 class CreateDataForwardResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # CreateForwardRule请求参数结构体 class CreateForwardRuleRequest < TencentCloud::Common::AbstractModel # @param ProductID: 产品ID # @type ProductID: String # @param MsgType: 消息类型 # @type MsgType: Integer # @param Skey: 控制台Skey # @type Skey: String # @param QueueRegion: 队列区域 # @type QueueRegion: String # @param QueueType: 队列类型 0.CMQ 1.Ckafka # @type QueueType: Integer # @param Consecretid: 临时密钥 # @type Consecretid: String # @param InstanceId: 实例ID # @type InstanceId: String # @param InstanceName: 实例名称 # @type InstanceName: String # @param QueueID: 队列或主题ID # @type QueueID: String # @param QueueName: 队列或主题名称 # @type QueueName: String attr_accessor :ProductID, :MsgType, :Skey, :QueueRegion, :QueueType, :Consecretid, :InstanceId, :InstanceName, :QueueID, :QueueName def initialize(productid=nil, msgtype=nil, skey=nil, queueregion=nil, queuetype=nil, consecretid=nil, instanceid=nil, instancename=nil, queueid=nil, queuename=nil) @ProductID = productid @MsgType = msgtype @Skey = skey @QueueRegion = queueregion @QueueType = queuetype @Consecretid = consecretid @InstanceId = instanceid @InstanceName = instancename @QueueID = queueid @QueueName = queuename end def deserialize(params) @ProductID = params['ProductID'] @MsgType = params['MsgType'] @Skey = params['Skey'] @QueueRegion = params['QueueRegion'] @QueueType = params['QueueType'] @Consecretid = params['Consecretid'] @InstanceId = params['InstanceId'] @InstanceName = params['InstanceName'] @QueueID = params['QueueID'] @QueueName = params['QueueName'] end end # CreateForwardRule返回参数结构体 class CreateForwardRuleResponse < TencentCloud::Common::AbstractModel # @param Endpoint: 腾讯云账号 # @type Endpoint: String # @param QueueName: 队列名 # @type QueueName: String # @param ProductID: 产品ID # @type ProductID: String # @param MsgType: 消息类型 # @type MsgType: Integer # @param Result: 结果 # @type Result: Integer # @param RoleName: 角色名称 # @type RoleName: String # @param RoleID: 角色ID # @type RoleID: Integer # @param QueueRegion: 队列区 # @type QueueRegion: String # @param QueueType: 消息队列的类型。 0:CMQ,1:CKafaka # @type QueueType: Integer # @param InstanceId: 实例id, 目前只有Ckafaka会用到 # @type InstanceId: String # @param InstanceName: 实例名称,目前只有Ckafaka会用到 # @type InstanceName: String # @param ErrMsg: 错误消息 # @type ErrMsg: String # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Endpoint, :QueueName, :ProductID, :MsgType, :Result, :RoleName, :RoleID, :QueueRegion, :QueueType, :InstanceId, :InstanceName, :ErrMsg, :RequestId def initialize(endpoint=nil, queuename=nil, productid=nil, msgtype=nil, result=nil, rolename=nil, roleid=nil, queueregion=nil, queuetype=nil, instanceid=nil, instancename=nil, errmsg=nil, requestid=nil) @Endpoint = endpoint @QueueName = queuename @ProductID = productid @MsgType = msgtype @Result = result @RoleName = rolename @RoleID = roleid @QueueRegion = queueregion @QueueType = queuetype @InstanceId = instanceid @InstanceName = instancename @ErrMsg = errmsg @RequestId = requestid end def deserialize(params) @Endpoint = params['Endpoint'] @QueueName = params['QueueName'] @ProductID = params['ProductID'] @MsgType = params['MsgType'] @Result = params['Result'] @RoleName = params['RoleName'] @RoleID = params['RoleID'] @QueueRegion = params['QueueRegion'] @QueueType = params['QueueType'] @InstanceId = params['InstanceId'] @InstanceName = params['InstanceName'] @ErrMsg = params['ErrMsg'] @RequestId = params['RequestId'] end end # CreateProduct请求参数结构体 class CreateProductRequest < TencentCloud::Common::AbstractModel # @param ProductName: 产品名称 # @type ProductName: String # @param DeviceType: 产品设备类型 1.普通设备 2.NVR设备 # @type DeviceType: Integer # @param ProductVaildYears: 产品有效期 # @type ProductVaildYears: Integer # @param Features: 设备功能码 ypsxth音频双向通话 spdxth视频单向通话 sxysp双向音视频 # 注意:此字段只支持创建'摄像头'和'儿童手表',摄像头传["ypsxth","spdxth"],儿童手表传["ypsxth","spdxth","sxysp"],创建其它品类的产品需要传递CategoryId字段,通过云api调用此接口时,如果传了CategoryId字段,将忽略Features字段,但Features仍需传值(可传任意字符串数组) # @type Features: Array # @param ChipManufactureId: 芯片厂商id,通用设备填default # @type ChipManufactureId: String # @param ChipId: 芯片id,通用设备填default # @type ChipId: String # @param ProductDescription: 产品描述信息 # @type ProductDescription: String # @param ChipOs: 设备操作系统,通用设备填default # @type ChipOs: String # @param EncryptionType: 认证方式 只支持取值为2 psk认证 # @type EncryptionType: Integer # @param CategoryId: 产品品类id,113:摄像头,567:儿童手表,595:可视对讲门锁 # 注意:通过云api调用此接口时,如果传了CategoryId字段,将忽略Features字段,但Features仍需传值(可传任意字符串数组) # @type CategoryId: Integer # @param NetType: 连接类型,wifi表示WIFI连接,cellular表示4G连接 # @type NetType: String attr_accessor :ProductName, :DeviceType, :ProductVaildYears, :Features, :ChipManufactureId, :ChipId, :ProductDescription, :ChipOs, :EncryptionType, :CategoryId, :NetType def initialize(productname=nil, devicetype=nil, productvaildyears=nil, features=nil, chipmanufactureid=nil, chipid=nil, productdescription=nil, chipos=nil, encryptiontype=nil, categoryid=nil, nettype=nil) @ProductName = productname @DeviceType = devicetype @ProductVaildYears = productvaildyears @Features = features @ChipManufactureId = chipmanufactureid @ChipId = chipid @ProductDescription = productdescription @ChipOs = chipos @EncryptionType = encryptiontype @CategoryId = categoryid @NetType = nettype end def deserialize(params) @ProductName = params['ProductName'] @DeviceType = params['DeviceType'] @ProductVaildYears = params['ProductVaildYears'] @Features = params['Features'] @ChipManufactureId = params['ChipManufactureId'] @ChipId = params['ChipId'] @ProductDescription = params['ProductDescription'] @ChipOs = params['ChipOs'] @EncryptionType = params['EncryptionType'] @CategoryId = params['CategoryId'] @NetType = params['NetType'] end end # CreateProduct返回参数结构体 class CreateProductResponse < TencentCloud::Common::AbstractModel # @param Data: 产品详情 # @type Data: :class:`Tencentcloud::Iotvideo.v20211125.models.VideoProduct` # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Data, :RequestId def initialize(data=nil, requestid=nil) @Data = data @RequestId = requestid end def deserialize(params) unless params['Data'].nil? @Data = VideoProduct.new @Data.deserialize(params['Data']) end @RequestId = params['RequestId'] end end # CreateTaskFileUrl请求参数结构体 class CreateTaskFileUrlRequest < TencentCloud::Common::AbstractModel # @param ProductId: 产品ID # @type ProductId: String attr_accessor :ProductId def initialize(productid=nil) @ProductId = productid end def deserialize(params) @ProductId = params['ProductId'] end end # CreateTaskFileUrl返回参数结构体 class CreateTaskFileUrlResponse < TencentCloud::Common::AbstractModel # @param Url: 任务文件上传链接 # @type Url: String # @param FileName: 任务文件名 # @type FileName: String # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Url, :FileName, :RequestId def initialize(url=nil, filename=nil, requestid=nil) @Url = url @FileName = filename @RequestId = requestid end def deserialize(params) @Url = params['Url'] @FileName = params['FileName'] @RequestId = params['RequestId'] end end # 数据转发描述 class DataForward < TencentCloud::Common::AbstractModel # @param ProductId: 产品ID。 # @type ProductId: String # @param ForwardAddr: 转发地址。 # @type ForwardAddr: String # @param Status: 转发状态。 # @type Status: Integer # @param CreateTime: 创建时间。 # @type CreateTime: Integer # @param UpdateTime: 更新时间。 # @type UpdateTime: Integer # @param DataChose: 1-数据信息转发 2-设备上下线状态转发 3-数据信息转发&设备上下线状态转发 # 注意:此字段可能返回 null,表示取不到有效值。 # @type DataChose: Integer attr_accessor :ProductId, :ForwardAddr, :Status, :CreateTime, :UpdateTime, :DataChose def initialize(productid=nil, forwardaddr=nil, status=nil, createtime=nil, updatetime=nil, datachose=nil) @ProductId = productid @ForwardAddr = forwardaddr @Status = status @CreateTime = createtime @UpdateTime = updatetime @DataChose = datachose end def deserialize(params) @ProductId = params['ProductId'] @ForwardAddr = params['ForwardAddr'] @Status = params['Status'] @CreateTime = params['CreateTime'] @UpdateTime = params['UpdateTime'] @DataChose = params['DataChose'] end end # DeleteDevice请求参数结构体 class DeleteDeviceRequest < TencentCloud::Common::AbstractModel # @param ProductId: 产品ID。 # @type ProductId: String # @param DeviceName: 设备名称。 # @type DeviceName: String attr_accessor :ProductId, :DeviceName def initialize(productid=nil, devicename=nil) @ProductId = productid @DeviceName = devicename end def deserialize(params) @ProductId = params['ProductId'] @DeviceName = params['DeviceName'] end end # DeleteDevice返回参数结构体 class DeleteDeviceResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # DeleteFirmware请求参数结构体 class DeleteFirmwareRequest < TencentCloud::Common::AbstractModel # @param ProductID: 产品ID # @type ProductID: String # @param FirmwareVersion: 固件版本 # @type FirmwareVersion: String attr_accessor :ProductID, :FirmwareVersion def initialize(productid=nil, firmwareversion=nil) @ProductID = productid @FirmwareVersion = firmwareversion end def deserialize(params) @ProductID = params['ProductID'] @FirmwareVersion = params['FirmwareVersion'] end end # DeleteFirmware返回参数结构体 class DeleteFirmwareResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # DeleteForwardRule请求参数结构体 class DeleteForwardRuleRequest < TencentCloud::Common::AbstractModel # @param ProductID: 产品ID # @type ProductID: String # @param Skey: 控制台Skey # @type Skey: String # @param QueueType: 队列类型 # @type QueueType: Integer # @param QueueName: 队列名称 # @type QueueName: String attr_accessor :ProductID, :Skey, :QueueType, :QueueName def initialize(productid=nil, skey=nil, queuetype=nil, queuename=nil) @ProductID = productid @Skey = skey @QueueType = queuetype @QueueName = queuename end def deserialize(params) @ProductID = params['ProductID'] @Skey = params['Skey'] @QueueType = params['QueueType'] @QueueName = params['QueueName'] end end # DeleteForwardRule返回参数结构体 class DeleteForwardRuleResponse < TencentCloud::Common::AbstractModel # @param Endpoint: 腾讯云账号 # @type Endpoint: String # @param QueueName: 队列名称 # @type QueueName: String # @param ProductID: 产品ID # @type ProductID: String # @param Result: 删除结果 0成功 其他不成功 # @type Result: Integer # @param ErrMsg: 错误消息 # @type ErrMsg: String # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Endpoint, :QueueName, :ProductID, :Result, :ErrMsg, :RequestId def initialize(endpoint=nil, queuename=nil, productid=nil, result=nil, errmsg=nil, requestid=nil) @Endpoint = endpoint @QueueName = queuename @ProductID = productid @Result = result @ErrMsg = errmsg @RequestId = requestid end def deserialize(params) @Endpoint = params['Endpoint'] @QueueName = params['QueueName'] @ProductID = params['ProductID'] @Result = params['Result'] @ErrMsg = params['ErrMsg'] @RequestId = params['RequestId'] end end # DeleteProduct请求参数结构体 class DeleteProductRequest < TencentCloud::Common::AbstractModel # @param ProductId: 产品ID # @type ProductId: String attr_accessor :ProductId def initialize(productid=nil) @ProductId = productid end def deserialize(params) @ProductId = params['ProductId'] end end # DeleteProduct返回参数结构体 class DeleteProductResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # DescribeAIModelApplications请求参数结构体 class DescribeAIModelApplicationsRequest < TencentCloud::Common::AbstractModel # @param ModelId: 模型ID # @type ModelId: String # @param Limit: 分页的大小,最大100 # @type Limit: Integer # @param Offset: 偏移量,Offset从0开始 # @type Offset: Integer # @param ProductId: 产品ID # @type ProductId: String attr_accessor :ModelId, :Limit, :Offset, :ProductId def initialize(modelid=nil, limit=nil, offset=nil, productid=nil) @ModelId = modelid @Limit = limit @Offset = offset @ProductId = productid end def deserialize(params) @ModelId = params['ModelId'] @Limit = params['Limit'] @Offset = params['Offset'] @ProductId = params['ProductId'] end end # DescribeAIModelApplications返回参数结构体 class DescribeAIModelApplicationsResponse < TencentCloud::Common::AbstractModel # @param TotalCount: 申请记录数量 # @type TotalCount: Integer # @param Applications: 申请记录数组 # @type Applications: Array # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :TotalCount, :Applications, :RequestId def initialize(totalcount=nil, applications=nil, requestid=nil) @TotalCount = totalcount @Applications = applications @RequestId = requestid end def deserialize(params) @TotalCount = params['TotalCount'] unless params['Applications'].nil? @Applications = [] params['Applications'].each do |i| aimodelapplication_tmp = AIModelApplication.new aimodelapplication_tmp.deserialize(i) @Applications << aimodelapplication_tmp end end @RequestId = params['RequestId'] end end # DescribeAIModelChannel请求参数结构体 class DescribeAIModelChannelRequest < TencentCloud::Common::AbstractModel # @param ModelId: 模型ID # @type ModelId: String # @param ProductId: 产品ID # @type ProductId: String attr_accessor :ModelId, :ProductId def initialize(modelid=nil, productid=nil) @ModelId = modelid @ProductId = productid end def deserialize(params) @ModelId = params['ModelId'] @ProductId = params['ProductId'] end end # DescribeAIModelChannel返回参数结构体 class DescribeAIModelChannelResponse < TencentCloud::Common::AbstractModel # @param Type: 推送类型。ckafka:消息队列;forward:http/https推送 # @type Type: String # @param ForwardAddress: 第三方推送地址 # 注意:此字段可能返回 null,表示取不到有效值。 # @type ForwardAddress: String # @param ForwardKey: 第三方推送密钥 # 注意:此字段可能返回 null,表示取不到有效值。 # @type ForwardKey: String # @param CKafkaRegion: ckafka地域 # 注意:此字段可能返回 null,表示取不到有效值。 # @type CKafkaRegion: String # @param CKafkaInstance: ckafka实例 # 注意:此字段可能返回 null,表示取不到有效值。 # @type CKafkaInstance: String # @param CKafkaTopic: ckafka订阅主题 # 注意:此字段可能返回 null,表示取不到有效值。 # @type CKafkaTopic: String # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Type, :ForwardAddress, :ForwardKey, :CKafkaRegion, :CKafkaInstance, :CKafkaTopic, :RequestId def initialize(type=nil, forwardaddress=nil, forwardkey=nil, ckafkaregion=nil, ckafkainstance=nil, ckafkatopic=nil, requestid=nil) @Type = type @ForwardAddress = forwardaddress @ForwardKey = forwardkey @CKafkaRegion = ckafkaregion @CKafkaInstance = ckafkainstance @CKafkaTopic = ckafkatopic @RequestId = requestid end def deserialize(params) @Type = params['Type'] @ForwardAddress = params['ForwardAddress'] @ForwardKey = params['ForwardKey'] @CKafkaRegion = params['CKafkaRegion'] @CKafkaInstance = params['CKafkaInstance'] @CKafkaTopic = params['CKafkaTopic'] @RequestId = params['RequestId'] end end # DescribeAIModelUsage请求参数结构体 class DescribeAIModelUsageRequest < TencentCloud::Common::AbstractModel # @param ModelId: 模型ID # @type ModelId: String # @param ProductId: 产品ID # @type ProductId: String # @param Offset: 偏移量,从0开始 # @type Offset: Integer # @param Limit: 分页的大小,最大100 # @type Limit: Integer attr_accessor :ModelId, :ProductId, :Offset, :Limit def initialize(modelid=nil, productid=nil, offset=nil, limit=nil) @ModelId = modelid @ProductId = productid @Offset = offset @Limit = limit end def deserialize(params) @ModelId = params['ModelId'] @ProductId = params['ProductId'] @Offset = params['Offset'] @Limit = params['Limit'] end end # DescribeAIModelUsage返回参数结构体 class DescribeAIModelUsageResponse < TencentCloud::Common::AbstractModel # @param TotalCount: AI模型资源包总量 # @type TotalCount: Integer # @param UsageInfo: AI模型资源包信息数组 # @type UsageInfo: Array # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :TotalCount, :UsageInfo, :RequestId def initialize(totalcount=nil, usageinfo=nil, requestid=nil) @TotalCount = totalcount @UsageInfo = usageinfo @RequestId = requestid end def deserialize(params) @TotalCount = params['TotalCount'] unless params['UsageInfo'].nil? @UsageInfo = [] params['UsageInfo'].each do |i| aimodelusageinfo_tmp = AIModelUsageInfo.new aimodelusageinfo_tmp.deserialize(i) @UsageInfo << aimodelusageinfo_tmp end end @RequestId = params['RequestId'] end end # DescribeAIModels请求参数结构体 class DescribeAIModelsRequest < TencentCloud::Common::AbstractModel # @param ModelId: 模型ID # @type ModelId: String # @param Status: 申请状态:1-已申请;2-已取消;3-已拒绝;4-已通过 # @type Status: Integer # @param Offset: 偏移量,Offset从0开始 # @type Offset: Integer # @param Limit: 分页的大小,最大100 # @type Limit: Integer attr_accessor :ModelId, :Status, :Offset, :Limit def initialize(modelid=nil, status=nil, offset=nil, limit=nil) @ModelId = modelid @Status = status @Offset = offset @Limit = limit end def deserialize(params) @ModelId = params['ModelId'] @Status = params['Status'] @Offset = params['Offset'] @Limit = params['Limit'] end end # DescribeAIModels返回参数结构体 class DescribeAIModelsResponse < TencentCloud::Common::AbstractModel # @param TotalCount: AI模型数量 # @type TotalCount: Integer # @param Models: AI模型信息数组 # @type Models: Array # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :TotalCount, :Models, :RequestId def initialize(totalcount=nil, models=nil, requestid=nil) @TotalCount = totalcount @Models = models @RequestId = requestid end def deserialize(params) @TotalCount = params['TotalCount'] unless params['Models'].nil? @Models = [] params['Models'].each do |i| aimodelinfo_tmp = AIModelInfo.new aimodelinfo_tmp.deserialize(i) @Models << aimodelinfo_tmp end end @RequestId = params['RequestId'] end end # DescribeAccount请求参数结构体 class DescribeAccountRequest < TencentCloud::Common::AbstractModel # @param AccountType: 1设备,2云存,3ai # @type AccountType: Integer attr_accessor :AccountType def initialize(accounttype=nil) @AccountType = accounttype end def deserialize(params) @AccountType = params['AccountType'] end end # DescribeAccount返回参数结构体 class DescribeAccountResponse < TencentCloud::Common::AbstractModel # @param Uin: 查询的账号id # @type Uin: String # @param BillType: 1线上计费,2线下计费 # @type BillType: Integer # @param BillMode: 0未定义,1按套餐预付费,2按量后付费 # @type BillMode: Integer # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Uin, :BillType, :BillMode, :RequestId def initialize(uin=nil, billtype=nil, billmode=nil, requestid=nil) @Uin = uin @BillType = billtype @BillMode = billmode @RequestId = requestid end def deserialize(params) @Uin = params['Uin'] @BillType = params['BillType'] @BillMode = params['BillMode'] @RequestId = params['RequestId'] end end # DescribeBalance请求参数结构体 class DescribeBalanceRequest < TencentCloud::Common::AbstractModel # @param AccountType: 账户类型:1-设备接入;2-云存。 # @type AccountType: Integer attr_accessor :AccountType def initialize(accounttype=nil) @AccountType = accounttype end def deserialize(params) @AccountType = params['AccountType'] end end # DescribeBalance返回参数结构体 class DescribeBalanceResponse < TencentCloud::Common::AbstractModel # @param Balance: 账户余额,单位:分(人民币)。 # @type Balance: Integer # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Balance, :RequestId def initialize(balance=nil, requestid=nil) @Balance = balance @RequestId = requestid end def deserialize(params) @Balance = params['Balance'] @RequestId = params['RequestId'] end end # DescribeBalanceTransactions请求参数结构体 class DescribeBalanceTransactionsRequest < TencentCloud::Common::AbstractModel # @param AccountType: 账户类型:1-设备接入;2-云存。 # @type AccountType: Integer # @param Offset: 分页游标开始,默认为0开始拉取第一条。 # @type Offset: Integer # @param Limit: 分页每页数量。 # @type Limit: Integer # @param Operation: 流水类型:All-全部类型;Recharge-充值;CreateOrder-新购。默认为All # @type Operation: String attr_accessor :AccountType, :Offset, :Limit, :Operation def initialize(accounttype=nil, offset=nil, limit=nil, operation=nil) @AccountType = accounttype @Offset = offset @Limit = limit @Operation = operation end def deserialize(params) @AccountType = params['AccountType'] @Offset = params['Offset'] @Limit = params['Limit'] @Operation = params['Operation'] end end # DescribeBalanceTransactions返回参数结构体 class DescribeBalanceTransactionsResponse < TencentCloud::Common::AbstractModel # @param TotalCount: 账户流水总数。 # @type TotalCount: Integer # @param Transactions: 账户流水详情数组。 # @type Transactions: Array # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :TotalCount, :Transactions, :RequestId def initialize(totalcount=nil, transactions=nil, requestid=nil) @TotalCount = totalcount @Transactions = transactions @RequestId = requestid end def deserialize(params) @TotalCount = params['TotalCount'] unless params['Transactions'].nil? @Transactions = [] params['Transactions'].each do |i| balancetransaction_tmp = BalanceTransaction.new balancetransaction_tmp.deserialize(i) @Transactions << balancetransaction_tmp end end @RequestId = params['RequestId'] end end # DescribeBatch请求参数结构体 class DescribeBatchRequest < TencentCloud::Common::AbstractModel # @param BatchId: 批次ID # @type BatchId: Integer attr_accessor :BatchId def initialize(batchid=nil) @BatchId = batchid end def deserialize(params) @BatchId = params['BatchId'] end end # DescribeBatch返回参数结构体 class DescribeBatchResponse < TencentCloud::Common::AbstractModel # @param Data: 批次详情 # @type Data: :class:`Tencentcloud::Iotvideo.v20211125.models.VideoBatch` # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Data, :RequestId def initialize(data=nil, requestid=nil) @Data = data @RequestId = requestid end def deserialize(params) unless params['Data'].nil? @Data = VideoBatch.new @Data.deserialize(params['Data']) end @RequestId = params['RequestId'] end end # DescribeBatchs请求参数结构体 class DescribeBatchsRequest < TencentCloud::Common::AbstractModel # @param ProductId: 产品ID # @type ProductId: String # @param Limit: 分页的大小,最大100 # @type Limit: Integer # @param Offset: 偏移量,Offset从0开始 # @type Offset: Integer attr_accessor :ProductId, :Limit, :Offset def initialize(productid=nil, limit=nil, offset=nil) @ProductId = productid @Limit = limit @Offset = offset end def deserialize(params) @ProductId = params['ProductId'] @Limit = params['Limit'] @Offset = params['Offset'] end end # DescribeBatchs返回参数结构体 class DescribeBatchsResponse < TencentCloud::Common::AbstractModel # @param TotalCount: 批次数量 # @type TotalCount: Integer # @param Data: 批次列表详情 # @type Data: Array # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :TotalCount, :Data, :RequestId def initialize(totalcount=nil, data=nil, requestid=nil) @TotalCount = totalcount @Data = data @RequestId = requestid end def deserialize(params) @TotalCount = params['TotalCount'] unless params['Data'].nil? @Data = [] params['Data'].each do |i| videobatch_tmp = VideoBatch.new videobatch_tmp.deserialize(i) @Data << videobatch_tmp end end @RequestId = params['RequestId'] end end # DescribeBonuses请求参数结构体 class DescribeBonusesRequest < TencentCloud::Common::AbstractModel # @param Offset: 分页拉取偏移 # @type Offset: Integer # @param Limit: 分页拉取数量 # @type Limit: Integer attr_accessor :Offset, :Limit def initialize(offset=nil, limit=nil) @Offset = offset @Limit = limit end def deserialize(params) @Offset = params['Offset'] @Limit = params['Limit'] end end # DescribeBonuses返回参数结构体 class DescribeBonusesResponse < TencentCloud::Common::AbstractModel # @param TotalCount: 资源包总数 # @type TotalCount: Integer # @param Bonuses: 资源包信息 # @type Bonuses: Array # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :TotalCount, :Bonuses, :RequestId def initialize(totalcount=nil, bonuses=nil, requestid=nil) @TotalCount = totalcount @Bonuses = bonuses @RequestId = requestid end def deserialize(params) @TotalCount = params['TotalCount'] unless params['Bonuses'].nil? @Bonuses = [] params['Bonuses'].each do |i| bonusinfo_tmp = BonusInfo.new bonusinfo_tmp.deserialize(i) @Bonuses << bonusinfo_tmp end end @RequestId = params['RequestId'] end end # DescribeCategory请求参数结构体 class DescribeCategoryRequest < TencentCloud::Common::AbstractModel # @param Id: Category ID。 # @type Id: Integer attr_accessor :Id def initialize(id=nil) @Id = id end def deserialize(params) @Id = params['Id'] end end # DescribeCategory返回参数结构体 class DescribeCategoryResponse < TencentCloud::Common::AbstractModel # @param Data: Category详情 # @type Data: :class:`Tencentcloud::Iotvideo.v20211125.models.ProductTemplate` # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Data, :RequestId def initialize(data=nil, requestid=nil) @Data = data @RequestId = requestid end def deserialize(params) unless params['Data'].nil? @Data = ProductTemplate.new @Data.deserialize(params['Data']) end @RequestId = params['RequestId'] end end # DescribeCloudStorageDate请求参数结构体 class DescribeCloudStorageDateRequest < TencentCloud::Common::AbstractModel # @param ProductId: 产品ID # @type ProductId: String # @param DeviceName: 设备名称 # @type DeviceName: String # @param UserId: 用户ID # @type UserId: String attr_accessor :ProductId, :DeviceName, :UserId def initialize(productid=nil, devicename=nil, userid=nil) @ProductId = productid @DeviceName = devicename @UserId = userid end def deserialize(params) @ProductId = params['ProductId'] @DeviceName = params['DeviceName'] @UserId = params['UserId'] end end # DescribeCloudStorageDate返回参数结构体 class DescribeCloudStorageDateResponse < TencentCloud::Common::AbstractModel # @param Data: 云存日期数组,["2021-01-05","2021-01-06"] # @type Data: Array # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Data, :RequestId def initialize(data=nil, requestid=nil) @Data = data @RequestId = requestid end def deserialize(params) @Data = params['Data'] @RequestId = params['RequestId'] end end # DescribeCloudStorageEvents请求参数结构体 class DescribeCloudStorageEventsRequest < TencentCloud::Common::AbstractModel # @param ProductId: 产品ID # @type ProductId: String # @param DeviceName: 设备名称 # @type DeviceName: String # @param StartTime: 起始时间(Unix 时间戳,秒级), 为0 表示 当前时间 - 24h # @type StartTime: Integer # @param EndTime: 结束时间(Unix 时间戳,秒级), 为0 表示当前时间 # @type EndTime: Integer # @param Context: 请求上下文, 用作查询游标 # @type Context: String # @param Size: 查询数据项目的最大数量, 默认为10。假设传Size=10,返回的实际事件数量为N,则 5 <= N <= 10。 # @type Size: Integer # @param EventId: 事件标识符,可以用来指定查询特定的事件,如果不指定,则查询所有事件。 # @type EventId: String # @param UserId: 用户ID # @type UserId: String # @param ChannelId: 通道ID 非NVR设备则不填 NVR设备则必填 默认为无 # @type ChannelId: Integer attr_accessor :ProductId, :DeviceName, :StartTime, :EndTime, :Context, :Size, :EventId, :UserId, :ChannelId def initialize(productid=nil, devicename=nil, starttime=nil, endtime=nil, context=nil, size=nil, eventid=nil, userid=nil, channelid=nil) @ProductId = productid @DeviceName = devicename @StartTime = starttime @EndTime = endtime @Context = context @Size = size @EventId = eventid @UserId = userid @ChannelId = channelid end def deserialize(params) @ProductId = params['ProductId'] @DeviceName = params['DeviceName'] @StartTime = params['StartTime'] @EndTime = params['EndTime'] @Context = params['Context'] @Size = params['Size'] @EventId = params['EventId'] @UserId = params['UserId'] @ChannelId = params['ChannelId'] end end # DescribeCloudStorageEvents返回参数结构体 class DescribeCloudStorageEventsResponse < TencentCloud::Common::AbstractModel # @param Events: 云存事件列表 # @type Events: Array # @param Context: 请求上下文, 用作查询游标 # @type Context: String # @param Listover: 拉取结果是否已经结束 # @type Listover: Boolean # @param Total: 内部结果数量,并不等同于事件总数。 # @type Total: Integer # @param VideoURL: 视频播放URL # @type VideoURL: String # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Events, :Context, :Listover, :Total, :VideoURL, :RequestId def initialize(events=nil, context=nil, listover=nil, total=nil, videourl=nil, requestid=nil) @Events = events @Context = context @Listover = listover @Total = total @VideoURL = videourl @RequestId = requestid end def deserialize(params) unless params['Events'].nil? @Events = [] params['Events'].each do |i| cloudstorageevent_tmp = CloudStorageEvent.new cloudstorageevent_tmp.deserialize(i) @Events << cloudstorageevent_tmp end end @Context = params['Context'] @Listover = params['Listover'] @Total = params['Total'] @VideoURL = params['VideoURL'] @RequestId = params['RequestId'] end end # DescribeCloudStoragePackageConsumeDetails请求参数结构体 class DescribeCloudStoragePackageConsumeDetailsRequest < TencentCloud::Common::AbstractModel # @param StartDate: 开始日期 # @type StartDate: String # @param EndDate: 结束日期 # @type EndDate: String attr_accessor :StartDate, :EndDate def initialize(startdate=nil, enddate=nil) @StartDate = startdate @EndDate = enddate end def deserialize(params) @StartDate = params['StartDate'] @EndDate = params['EndDate'] end end # DescribeCloudStoragePackageConsumeDetails返回参数结构体 class DescribeCloudStoragePackageConsumeDetailsResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # DescribeCloudStoragePackageConsumeStats请求参数结构体 class DescribeCloudStoragePackageConsumeStatsRequest < TencentCloud::Common::AbstractModel # @param StartDate: 开始日期 # @type StartDate: String # @param EndDate: 结束日期,开始与结束日期间隔不可超过一年 # @type EndDate: String attr_accessor :StartDate, :EndDate def initialize(startdate=nil, enddate=nil) @StartDate = startdate @EndDate = enddate end def deserialize(params) @StartDate = params['StartDate'] @EndDate = params['EndDate'] end end # DescribeCloudStoragePackageConsumeStats返回参数结构体 class DescribeCloudStoragePackageConsumeStatsResponse < TencentCloud::Common::AbstractModel # @param Stats: 统计列表详情 # @type Stats: Array # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Stats, :RequestId def initialize(stats=nil, requestid=nil) @Stats = stats @RequestId = requestid end def deserialize(params) unless params['Stats'].nil? @Stats = [] params['Stats'].each do |i| packageconsumestat_tmp = PackageConsumeStat.new packageconsumestat_tmp.deserialize(i) @Stats << packageconsumestat_tmp end end @RequestId = params['RequestId'] end end # DescribeCloudStorage请求参数结构体 class DescribeCloudStorageRequest < TencentCloud::Common::AbstractModel # @param ProductId: 产品ID # @type ProductId: String # @param DeviceName: 设备名称 # @type DeviceName: String # @param UserId: 云存用户ID # @type UserId: String attr_accessor :ProductId, :DeviceName, :UserId def initialize(productid=nil, devicename=nil, userid=nil) @ProductId = productid @DeviceName = devicename @UserId = userid end def deserialize(params) @ProductId = params['ProductId'] @DeviceName = params['DeviceName'] @UserId = params['UserId'] end end # DescribeCloudStorage返回参数结构体 class DescribeCloudStorageResponse < TencentCloud::Common::AbstractModel # @param Status: 云存开启状态,1为开启,0为未开启或已过期 # @type Status: Integer # @param Type: 云存类型,1为全时云存,2为事件云存 # @type Type: Integer # @param ExpireTime: 云存套餐过期时间 # @type ExpireTime: Integer # @param ShiftDuration: 云存回看时长 # @type ShiftDuration: Integer # @param UserId: 云存用户ID # 注意:此字段可能返回 null,表示取不到有效值。 # @type UserId: String # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Status, :Type, :ExpireTime, :ShiftDuration, :UserId, :RequestId def initialize(status=nil, type=nil, expiretime=nil, shiftduration=nil, userid=nil, requestid=nil) @Status = status @Type = type @ExpireTime = expiretime @ShiftDuration = shiftduration @UserId = userid @RequestId = requestid end def deserialize(params) @Status = params['Status'] @Type = params['Type'] @ExpireTime = params['ExpireTime'] @ShiftDuration = params['ShiftDuration'] @UserId = params['UserId'] @RequestId = params['RequestId'] end end # DescribeCloudStorageStreamData请求参数结构体 class DescribeCloudStorageStreamDataRequest < TencentCloud::Common::AbstractModel # @param ProductId: 产品ID # @type ProductId: String # @param DeviceName: 设备名称 # @type DeviceName: String # @param StartTime: 图片流事件开始时间 # @type StartTime: Integer attr_accessor :ProductId, :DeviceName, :StartTime def initialize(productid=nil, devicename=nil, starttime=nil) @ProductId = productid @DeviceName = devicename @StartTime = starttime end def deserialize(params) @ProductId = params['ProductId'] @DeviceName = params['DeviceName'] @StartTime = params['StartTime'] end end # DescribeCloudStorageStreamData返回参数结构体 class DescribeCloudStorageStreamDataResponse < TencentCloud::Common::AbstractModel # @param VideoStream: 图片流视频地址 # @type VideoStream: String # @param AudioStream: 图片流音频地址 # @type AudioStream: String # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :VideoStream, :AudioStream, :RequestId def initialize(videostream=nil, audiostream=nil, requestid=nil) @VideoStream = videostream @AudioStream = audiostream @RequestId = requestid end def deserialize(params) @VideoStream = params['VideoStream'] @AudioStream = params['AudioStream'] @RequestId = params['RequestId'] end end # DescribeCloudStorageThumbnail请求参数结构体 class DescribeCloudStorageThumbnailRequest < TencentCloud::Common::AbstractModel # @param ProductId: 产品ID # @type ProductId: String # @param DeviceName: 设备名称 # @type DeviceName: String # @param Thumbnail: 缩略图文件名 # @type Thumbnail: String attr_accessor :ProductId, :DeviceName, :Thumbnail def initialize(productid=nil, devicename=nil, thumbnail=nil) @ProductId = productid @DeviceName = devicename @Thumbnail = thumbnail end def deserialize(params) @ProductId = params['ProductId'] @DeviceName = params['DeviceName'] @Thumbnail = params['Thumbnail'] end end # DescribeCloudStorageThumbnail返回参数结构体 class DescribeCloudStorageThumbnailResponse < TencentCloud::Common::AbstractModel # @param ThumbnailURL: 缩略图访问地址 # @type ThumbnailURL: String # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :ThumbnailURL, :RequestId def initialize(thumbnailurl=nil, requestid=nil) @ThumbnailURL = thumbnailurl @RequestId = requestid end def deserialize(params) @ThumbnailURL = params['ThumbnailURL'] @RequestId = params['RequestId'] end end # DescribeCloudStorageTime请求参数结构体 class DescribeCloudStorageTimeRequest < TencentCloud::Common::AbstractModel # @param ProductId: 产品ID # @type ProductId: String # @param DeviceName: 设备名称 # @type DeviceName: String # @param Date: 云存日期,例如"2020-01-05" # @type Date: String # @param StartTime: 开始时间,unix时间 # @type StartTime: Integer # @param EndTime: 结束时间,unix时间 # @type EndTime: Integer # @param UserId: 用户ID # @type UserId: String attr_accessor :ProductId, :DeviceName, :Date, :StartTime, :EndTime, :UserId def initialize(productid=nil, devicename=nil, date=nil, starttime=nil, endtime=nil, userid=nil) @ProductId = productid @DeviceName = devicename @Date = date @StartTime = starttime @EndTime = endtime @UserId = userid end def deserialize(params) @ProductId = params['ProductId'] @DeviceName = params['DeviceName'] @Date = params['Date'] @StartTime = params['StartTime'] @EndTime = params['EndTime'] @UserId = params['UserId'] end end # DescribeCloudStorageTime返回参数结构体 class DescribeCloudStorageTimeResponse < TencentCloud::Common::AbstractModel # @param Data: 接口返回数据 # @type Data: :class:`Tencentcloud::Iotvideo.v20211125.models.CloudStorageTimeData` # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Data, :RequestId def initialize(data=nil, requestid=nil) @Data = data @RequestId = requestid end def deserialize(params) unless params['Data'].nil? @Data = CloudStorageTimeData.new @Data.deserialize(params['Data']) end @RequestId = params['RequestId'] end end # DescribeCloudStorageUsers请求参数结构体 class DescribeCloudStorageUsersRequest < TencentCloud::Common::AbstractModel # @param ProductId: 产品ID # @type ProductId: String # @param DeviceName: 设备名称 # @type DeviceName: String # @param Limit: 分页拉取数量 # @type Limit: Integer # @param Offset: 分页拉取偏移 # @type Offset: Integer attr_accessor :ProductId, :DeviceName, :Limit, :Offset def initialize(productid=nil, devicename=nil, limit=nil, offset=nil) @ProductId = productid @DeviceName = devicename @Limit = limit @Offset = offset end def deserialize(params) @ProductId = params['ProductId'] @DeviceName = params['DeviceName'] @Limit = params['Limit'] @Offset = params['Offset'] end end # DescribeCloudStorageUsers返回参数结构体 class DescribeCloudStorageUsersResponse < TencentCloud::Common::AbstractModel # @param TotalCount: 用户总数 # @type TotalCount: Integer # @param Users: 用户信息 # @type Users: Array # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :TotalCount, :Users, :RequestId def initialize(totalcount=nil, users=nil, requestid=nil) @TotalCount = totalcount @Users = users @RequestId = requestid end def deserialize(params) @TotalCount = params['TotalCount'] unless params['Users'].nil? @Users = [] params['Users'].each do |i| cloudstorageuserinfo_tmp = CloudStorageUserInfo.new cloudstorageuserinfo_tmp.deserialize(i) @Users << cloudstorageuserinfo_tmp end end @RequestId = params['RequestId'] end end # DescribeDataForwardList请求参数结构体 class DescribeDataForwardListRequest < TencentCloud::Common::AbstractModel # @param ProductIds: 产品ID列表 # @type ProductIds: String attr_accessor :ProductIds def initialize(productids=nil) @ProductIds = productids end def deserialize(params) @ProductIds = params['ProductIds'] end end # DescribeDataForwardList返回参数结构体 class DescribeDataForwardListResponse < TencentCloud::Common::AbstractModel # @param DataForwardList: 数据转发列表。 # 注意:此字段可能返回 null,表示取不到有效值。 # @type DataForwardList: Array # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :DataForwardList, :RequestId def initialize(dataforwardlist=nil, requestid=nil) @DataForwardList = dataforwardlist @RequestId = requestid end def deserialize(params) unless params['DataForwardList'].nil? @DataForwardList = [] params['DataForwardList'].each do |i| dataforward_tmp = DataForward.new dataforward_tmp.deserialize(i) @DataForwardList << dataforward_tmp end end @RequestId = params['RequestId'] end end # DescribeDeviceActionHistory请求参数结构体 class DescribeDeviceActionHistoryRequest < TencentCloud::Common::AbstractModel # @param ProductId: 产品Id # @type ProductId: String # @param DeviceName: 设备名称 # @type DeviceName: String # @param MinTime: 开始范围的 unix 毫秒时间戳 # @type MinTime: Integer # @param MaxTime: 结束范围的 unix 毫秒时间戳 # @type MaxTime: Integer # @param ActionId: 动作Id # @type ActionId: String # @param Limit: 查询条数 默认为0 最大不超过500 # @type Limit: Integer # @param Context: 游标,标识查询位置。 # @type Context: String attr_accessor :ProductId, :DeviceName, :MinTime, :MaxTime, :ActionId, :Limit, :Context def initialize(productid=nil, devicename=nil, mintime=nil, maxtime=nil, actionid=nil, limit=nil, context=nil) @ProductId = productid @DeviceName = devicename @MinTime = mintime @MaxTime = maxtime @ActionId = actionid @Limit = limit @Context = context end def deserialize(params) @ProductId = params['ProductId'] @DeviceName = params['DeviceName'] @MinTime = params['MinTime'] @MaxTime = params['MaxTime'] @ActionId = params['ActionId'] @Limit = params['Limit'] @Context = params['Context'] end end # DescribeDeviceActionHistory返回参数结构体 class DescribeDeviceActionHistoryResponse < TencentCloud::Common::AbstractModel # @param TotalCounts: 总条数 # @type TotalCounts: Integer # @param ActionHistories: 动作历史 # 注意:此字段可能返回 null,表示取不到有效值。 # @type ActionHistories: Array # @param Context: 用于标识查询结果的上下文,翻页用。 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Context: String # @param Listover: 搜索结果是否已经结束。 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Listover: Boolean # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :TotalCounts, :ActionHistories, :Context, :Listover, :RequestId def initialize(totalcounts=nil, actionhistories=nil, context=nil, listover=nil, requestid=nil) @TotalCounts = totalcounts @ActionHistories = actionhistories @Context = context @Listover = listover @RequestId = requestid end def deserialize(params) @TotalCounts = params['TotalCounts'] unless params['ActionHistories'].nil? @ActionHistories = [] params['ActionHistories'].each do |i| actionhistory_tmp = ActionHistory.new actionhistory_tmp.deserialize(i) @ActionHistories << actionhistory_tmp end end @Context = params['Context'] @Listover = params['Listover'] @RequestId = params['RequestId'] end end # DescribeDeviceCommLog请求参数结构体 class DescribeDeviceCommLogRequest < TencentCloud::Common::AbstractModel # @param MinTime: 开始时间 13位时间戳 单位毫秒 # @type MinTime: Integer # @param MaxTime: 结束时间 13位时间戳 单位毫秒 # @type MaxTime: Integer # @param ProductId: 产品ID # @type ProductId: String # @param DeviceName: 设备名称 # @type DeviceName: String # @param Limit: 返回条数 默认为50 # @type Limit: Integer # @param Context: 检索上下文 # @type Context: String # @param Type: 类型:shadow 下行,device 上行 默认为空则全部查询 # @type Type: String attr_accessor :MinTime, :MaxTime, :ProductId, :DeviceName, :Limit, :Context, :Type def initialize(mintime=nil, maxtime=nil, productid=nil, devicename=nil, limit=nil, context=nil, type=nil) @MinTime = mintime @MaxTime = maxtime @ProductId = productid @DeviceName = devicename @Limit = limit @Context = context @Type = type end def deserialize(params) @MinTime = params['MinTime'] @MaxTime = params['MaxTime'] @ProductId = params['ProductId'] @DeviceName = params['DeviceName'] @Limit = params['Limit'] @Context = params['Context'] @Type = params['Type'] end end # DescribeDeviceCommLog返回参数结构体 class DescribeDeviceCommLogResponse < TencentCloud::Common::AbstractModel # @param Listover: 数据是否已全部返回,true 表示数据全部返回,false 表示还有数据待返回,可将 Context 作为入参,继续查询返回结果。 # @type Listover: Boolean # @param Context: 检索上下文,当 ListOver 为false时,可以用此上下文,继续读取后续数据 # @type Context: String # @param Results: 日志数据结果数组,返回对应时间点及取值。 # @type Results: Array # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Listover, :Context, :Results, :RequestId def initialize(listover=nil, context=nil, results=nil, requestid=nil) @Listover = listover @Context = context @Results = results @RequestId = requestid end def deserialize(params) @Listover = params['Listover'] @Context = params['Context'] unless params['Results'].nil? @Results = [] params['Results'].each do |i| devicecommlogitem_tmp = DeviceCommLogItem.new devicecommlogitem_tmp.deserialize(i) @Results << devicecommlogitem_tmp end end @RequestId = params['RequestId'] end end # DescribeDeviceDataHistory请求参数结构体 class DescribeDeviceDataHistoryRequest < TencentCloud::Common::AbstractModel # @param MinTime: 区间开始时间(Unix 时间戳,毫秒级) # @type MinTime: Integer # @param MaxTime: 区间结束时间(Unix 时间戳,毫秒级) # @type MaxTime: Integer # @param ProductId: 产品ID # @type ProductId: String # @param DeviceName: 设备名称 # @type DeviceName: String # @param FieldName: 属性字段名称,对应数据模板中功能属性的标识符 # @type FieldName: String # @param Limit: 返回条数 # @type Limit: Array # @param Context: 检索上下文 # @type Context: String attr_accessor :MinTime, :MaxTime, :ProductId, :DeviceName, :FieldName, :Limit, :Context def initialize(mintime=nil, maxtime=nil, productid=nil, devicename=nil, fieldname=nil, limit=nil, context=nil) @MinTime = mintime @MaxTime = maxtime @ProductId = productid @DeviceName = devicename @FieldName = fieldname @Limit = limit @Context = context end def deserialize(params) @MinTime = params['MinTime'] @MaxTime = params['MaxTime'] @ProductId = params['ProductId'] @DeviceName = params['DeviceName'] @FieldName = params['FieldName'] @Limit = params['Limit'] @Context = params['Context'] end end # DescribeDeviceDataHistory返回参数结构体 class DescribeDeviceDataHistoryResponse < TencentCloud::Common::AbstractModel # @param FieldName: 属性字段名称,对应数据模板中功能属性的标识符 # 注意:此字段可能返回 null,表示取不到有效值。 # @type FieldName: String # @param Listover: 数据是否已全部返回,true 表示数据全部返回,false 表示还有数据待返回,可将 Context 作为入参,继续查询返回结果。 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Listover: Boolean # @param Context: 检索上下文,当 ListOver 为false时,可以用此上下文,继续读取后续数据 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Context: String # @param Results: 历史数据结果数组,返回对应时间点及取值。 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Results: Array # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :FieldName, :Listover, :Context, :Results, :RequestId def initialize(fieldname=nil, listover=nil, context=nil, results=nil, requestid=nil) @FieldName = fieldname @Listover = listover @Context = context @Results = results @RequestId = requestid end def deserialize(params) @FieldName = params['FieldName'] @Listover = params['Listover'] @Context = params['Context'] unless params['Results'].nil? @Results = [] params['Results'].each do |i| devicedatahistoryitem_tmp = DeviceDataHistoryItem.new devicedatahistoryitem_tmp.deserialize(i) @Results << devicedatahistoryitem_tmp end end @RequestId = params['RequestId'] end end # DescribeDeviceData请求参数结构体 class DescribeDeviceDataRequest < TencentCloud::Common::AbstractModel # @param ProductId: 产品ID # @type ProductId: String # @param DeviceName: 设备名称 # @type DeviceName: String attr_accessor :ProductId, :DeviceName def initialize(productid=nil, devicename=nil) @ProductId = productid @DeviceName = devicename end def deserialize(params) @ProductId = params['ProductId'] @DeviceName = params['DeviceName'] end end # DescribeDeviceData返回参数结构体 class DescribeDeviceDataResponse < TencentCloud::Common::AbstractModel # @param Data: 设备数据 # @type Data: String # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Data, :RequestId def initialize(data=nil, requestid=nil) @Data = data @RequestId = requestid end def deserialize(params) @Data = params['Data'] @RequestId = params['RequestId'] end end # DescribeDeviceDataStats请求参数结构体 class DescribeDeviceDataStatsRequest < TencentCloud::Common::AbstractModel # @param StartDate: 开始日期 # @type StartDate: String # @param EndDate: 结束日期 # @type EndDate: String # @param ProductId: 产品id # @type ProductId: String attr_accessor :StartDate, :EndDate, :ProductId def initialize(startdate=nil, enddate=nil, productid=nil) @StartDate = startdate @EndDate = enddate @ProductId = productid end def deserialize(params) @StartDate = params['StartDate'] @EndDate = params['EndDate'] @ProductId = params['ProductId'] end end # DescribeDeviceDataStats返回参数结构体 class DescribeDeviceDataStatsResponse < TencentCloud::Common::AbstractModel # @param RegisterCnt: 累计注册设备数 # 注意:此字段可能返回 null,表示取不到有效值。 # @type RegisterCnt: Integer # @param Data: 设备数量列表 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Data: Array # @param Total: 总数 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Total: Integer # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RegisterCnt, :Data, :Total, :RequestId def initialize(registercnt=nil, data=nil, total=nil, requestid=nil) @RegisterCnt = registercnt @Data = data @Total = total @RequestId = requestid end def deserialize(params) @RegisterCnt = params['RegisterCnt'] unless params['Data'].nil? @Data = [] params['Data'].each do |i| devicecntstats_tmp = DeviceCntStats.new devicecntstats_tmp.deserialize(i) @Data << devicecntstats_tmp end end @Total = params['Total'] @RequestId = params['RequestId'] end end # DescribeDeviceEventHistory请求参数结构体 class DescribeDeviceEventHistoryRequest < TencentCloud::Common::AbstractModel # @param ProductId: 产品ID # @type ProductId: String # @param DeviceName: 设备名称 # @type DeviceName: String # @param Type: 搜索的事件类型:alert 表示告警,fault 表示故障,info 表示信息,为空则表示查询上述所有类型事件 # @type Type: String # @param StartTime: 起始时间(Unix 时间戳,秒级), 为0 表示 当前时间 - 24h # @type StartTime: Integer # @param EndTime: 结束时间(Unix 时间戳,秒级), 为0 表示当前时间 # @type EndTime: Integer # @param Context: 搜索上下文, 用作查询游标 # @type Context: String # @param Size: 单次获取的历史数据项目的最大数量, 缺省10 # @type Size: Integer # @param EventId: 事件标识符,可以用来指定查询特定的事件,如果不指定,则查询所有事件。 # @type EventId: String attr_accessor :ProductId, :DeviceName, :Type, :StartTime, :EndTime, :Context, :Size, :EventId def initialize(productid=nil, devicename=nil, type=nil, starttime=nil, endtime=nil, context=nil, size=nil, eventid=nil) @ProductId = productid @DeviceName = devicename @Type = type @StartTime = starttime @EndTime = endtime @Context = context @Size = size @EventId = eventid end def deserialize(params) @ProductId = params['ProductId'] @DeviceName = params['DeviceName'] @Type = params['Type'] @StartTime = params['StartTime'] @EndTime = params['EndTime'] @Context = params['Context'] @Size = params['Size'] @EventId = params['EventId'] end end # DescribeDeviceEventHistory返回参数结构体 class DescribeDeviceEventHistoryResponse < TencentCloud::Common::AbstractModel # @param Context: 搜索上下文, 用作查询游标 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Context: String # @param Total: 搜索结果数量 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Total: Integer # @param Listover: 搜索结果是否已经结束 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Listover: Boolean # @param EventHistory: 搜集结果集 # 注意:此字段可能返回 null,表示取不到有效值。 # @type EventHistory: Array # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Context, :Total, :Listover, :EventHistory, :RequestId def initialize(context=nil, total=nil, listover=nil, eventhistory=nil, requestid=nil) @Context = context @Total = total @Listover = listover @EventHistory = eventhistory @RequestId = requestid end def deserialize(params) @Context = params['Context'] @Total = params['Total'] @Listover = params['Listover'] unless params['EventHistory'].nil? @EventHistory = [] params['EventHistory'].each do |i| eventhistoryitem_tmp = EventHistoryItem.new eventhistoryitem_tmp.deserialize(i) @EventHistory << eventhistoryitem_tmp end end @RequestId = params['RequestId'] end end # DescribeDevice请求参数结构体 class DescribeDeviceRequest < TencentCloud::Common::AbstractModel # @param ProductId: 产品ID # @type ProductId: String # @param DeviceName: 设备名 # @type DeviceName: String attr_accessor :ProductId, :DeviceName def initialize(productid=nil, devicename=nil) @ProductId = productid @DeviceName = devicename end def deserialize(params) @ProductId = params['ProductId'] @DeviceName = params['DeviceName'] end end # DescribeDevice返回参数结构体 class DescribeDeviceResponse < TencentCloud::Common::AbstractModel # @param DeviceName: 设备名 # @type DeviceName: String # @param Online: 设备是否在线,0不在线,1在线,2获取失败,3未激活 # @type Online: Integer # @param LoginTime: 设备最后上线时间 # @type LoginTime: Integer # @param DevicePsk: 设备密钥 # @type DevicePsk: String # @param EnableState: 设备启用状态 # @type EnableState: Integer # @param ExpireTime: 设备过期时间 # @type ExpireTime: Integer # @param LogLevel: 设备的sdk日志等级,0:关闭,1:错误,2:告警,3:信息,4:调试 # 注意:此字段可能返回 null,表示取不到有效值。 # @type LogLevel: Integer # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :DeviceName, :Online, :LoginTime, :DevicePsk, :EnableState, :ExpireTime, :LogLevel, :RequestId def initialize(devicename=nil, online=nil, logintime=nil, devicepsk=nil, enablestate=nil, expiretime=nil, loglevel=nil, requestid=nil) @DeviceName = devicename @Online = online @LoginTime = logintime @DevicePsk = devicepsk @EnableState = enablestate @ExpireTime = expiretime @LogLevel = loglevel @RequestId = requestid end def deserialize(params) @DeviceName = params['DeviceName'] @Online = params['Online'] @LoginTime = params['LoginTime'] @DevicePsk = params['DevicePsk'] @EnableState = params['EnableState'] @ExpireTime = params['ExpireTime'] @LogLevel = params['LogLevel'] @RequestId = params['RequestId'] end end # DescribeDeviceStatusLog请求参数结构体 class DescribeDeviceStatusLogRequest < TencentCloud::Common::AbstractModel # @param MinTime: 开始时间(毫秒) # @type MinTime: Integer # @param MaxTime: 结束时间(毫秒) # @type MaxTime: Integer # @param ProductId: 产品ID # @type ProductId: String # @param DeviceName: 设备名称 # @type DeviceName: String # @param Limit: 返回条数 # @type Limit: Integer # @param Context: 检索上下文 # @type Context: String attr_accessor :MinTime, :MaxTime, :ProductId, :DeviceName, :Limit, :Context def initialize(mintime=nil, maxtime=nil, productid=nil, devicename=nil, limit=nil, context=nil) @MinTime = mintime @MaxTime = maxtime @ProductId = productid @DeviceName = devicename @Limit = limit @Context = context end def deserialize(params) @MinTime = params['MinTime'] @MaxTime = params['MaxTime'] @ProductId = params['ProductId'] @DeviceName = params['DeviceName'] @Limit = params['Limit'] @Context = params['Context'] end end # DescribeDeviceStatusLog返回参数结构体 class DescribeDeviceStatusLogResponse < TencentCloud::Common::AbstractModel # @param Listover: 数据是否已全部返回,true 表示数据全部返回,false 表示还有数据待返回,可将 Context 作为入参,继续查询返回结果。 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Listover: Boolean # @param Context: 检索上下文,当 ListOver 为false时,可以用此上下文,继续读取后续数据 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Context: String # @param Results: 日志数据结果数组,返回对应时间点及取值。 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Results: Array # @param TotalCount: 日志数据结果总条数 # 注意:此字段可能返回 null,表示取不到有效值。 # @type TotalCount: Integer # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Listover, :Context, :Results, :TotalCount, :RequestId def initialize(listover=nil, context=nil, results=nil, totalcount=nil, requestid=nil) @Listover = listover @Context = context @Results = results @TotalCount = totalcount @RequestId = requestid end def deserialize(params) @Listover = params['Listover'] @Context = params['Context'] unless params['Results'].nil? @Results = [] params['Results'].each do |i| devicestatuslogitem_tmp = DeviceStatusLogItem.new devicestatuslogitem_tmp.deserialize(i) @Results << devicestatuslogitem_tmp end end @TotalCount = params['TotalCount'] @RequestId = params['RequestId'] end end # DescribeDevices请求参数结构体 class DescribeDevicesRequest < TencentCloud::Common::AbstractModel # @param ProductId: 需要查看设备列表的产品 ID # @type ProductId: String # @param Offset: 偏移量,Offset从0开始 # @type Offset: Integer # @param Limit: 分页的大小,最大100 # @type Limit: Integer # @param DeviceName: 需要过滤的设备名称 # @type DeviceName: String attr_accessor :ProductId, :Offset, :Limit, :DeviceName def initialize(productid=nil, offset=nil, limit=nil, devicename=nil) @ProductId = productid @Offset = offset @Limit = limit @DeviceName = devicename end def deserialize(params) @ProductId = params['ProductId'] @Offset = params['Offset'] @Limit = params['Limit'] @DeviceName = params['DeviceName'] end end # DescribeDevices返回参数结构体 class DescribeDevicesResponse < TencentCloud::Common::AbstractModel # @param TotalCount: 设备总数 # @type TotalCount: Integer # @param Devices: 设备详细信息列表 # @type Devices: Array # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :TotalCount, :Devices, :RequestId def initialize(totalcount=nil, devices=nil, requestid=nil) @TotalCount = totalcount @Devices = devices @RequestId = requestid end def deserialize(params) @TotalCount = params['TotalCount'] unless params['Devices'].nil? @Devices = [] params['Devices'].each do |i| deviceinfo_tmp = DeviceInfo.new deviceinfo_tmp.deserialize(i) @Devices << deviceinfo_tmp end end @RequestId = params['RequestId'] end end # DescribeFirmware请求参数结构体 class DescribeFirmwareRequest < TencentCloud::Common::AbstractModel # @param ProductID: 产品ID # @type ProductID: String # @param FirmwareVersion: 固件版本号 # @type FirmwareVersion: String attr_accessor :ProductID, :FirmwareVersion def initialize(productid=nil, firmwareversion=nil) @ProductID = productid @FirmwareVersion = firmwareversion end def deserialize(params) @ProductID = params['ProductID'] @FirmwareVersion = params['FirmwareVersion'] end end # DescribeFirmware返回参数结构体 class DescribeFirmwareResponse < TencentCloud::Common::AbstractModel # @param Version: 固件版本号 # @type Version: String # @param ProductId: 产品ID # @type ProductId: String # @param Name: 固件名称 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Name: String # @param Description: 固件描述 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Description: String # @param Md5sum: 固件Md5值 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Md5sum: String # @param Createtime: 固件上传的秒级时间戳 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Createtime: Integer # @param ProductName: 产品名称 # @type ProductName: String # @param FwType: 固件升级模块 # 注意:此字段可能返回 null,表示取不到有效值。 # @type FwType: String # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Version, :ProductId, :Name, :Description, :Md5sum, :Createtime, :ProductName, :FwType, :RequestId def initialize(version=nil, productid=nil, name=nil, description=nil, md5sum=nil, createtime=nil, productname=nil, fwtype=nil, requestid=nil) @Version = version @ProductId = productid @Name = name @Description = description @Md5sum = md5sum @Createtime = createtime @ProductName = productname @FwType = fwtype @RequestId = requestid end def deserialize(params) @Version = params['Version'] @ProductId = params['ProductId'] @Name = params['Name'] @Description = params['Description'] @Md5sum = params['Md5sum'] @Createtime = params['Createtime'] @ProductName = params['ProductName'] @FwType = params['FwType'] @RequestId = params['RequestId'] end end # DescribeFirmwareTaskDevices请求参数结构体 class DescribeFirmwareTaskDevicesRequest < TencentCloud::Common::AbstractModel # @param ProductID: 产品ID # @type ProductID: String # @param FirmwareVersion: 固件版本 # @type FirmwareVersion: String # @param Filters: 筛选条件 # @type Filters: Array # @param Offset: 查询偏移量 默认为0 # @type Offset: Integer # @param Limit: 查询的数量 默认为50 # @type Limit: Integer attr_accessor :ProductID, :FirmwareVersion, :Filters, :Offset, :Limit def initialize(productid=nil, firmwareversion=nil, filters=nil, offset=nil, limit=nil) @ProductID = productid @FirmwareVersion = firmwareversion @Filters = filters @Offset = offset @Limit = limit end def deserialize(params) @ProductID = params['ProductID'] @FirmwareVersion = params['FirmwareVersion'] unless params['Filters'].nil? @Filters = [] params['Filters'].each do |i| searchkeyword_tmp = SearchKeyword.new searchkeyword_tmp.deserialize(i) @Filters << searchkeyword_tmp end end @Offset = params['Offset'] @Limit = params['Limit'] end end # DescribeFirmwareTaskDevices返回参数结构体 class DescribeFirmwareTaskDevicesResponse < TencentCloud::Common::AbstractModel # @param Total: 固件升级任务的设备总数 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Total: Integer # @param Devices: 固件升级任务的设备列表 # @type Devices: Array # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Total, :Devices, :RequestId def initialize(total=nil, devices=nil, requestid=nil) @Total = total @Devices = devices @RequestId = requestid end def deserialize(params) @Total = params['Total'] unless params['Devices'].nil? @Devices = [] params['Devices'].each do |i| deviceupdatestatus_tmp = DeviceUpdateStatus.new deviceupdatestatus_tmp.deserialize(i) @Devices << deviceupdatestatus_tmp end end @RequestId = params['RequestId'] end end # DescribeFirmwareTaskDistribution请求参数结构体 class DescribeFirmwareTaskDistributionRequest < TencentCloud::Common::AbstractModel # @param ProductID: 产品ID # @type ProductID: String # @param FirmwareVersion: 固件版本号 # @type FirmwareVersion: String # @param TaskId: 固件升级任务ID # @type TaskId: Integer attr_accessor :ProductID, :FirmwareVersion, :TaskId def initialize(productid=nil, firmwareversion=nil, taskid=nil) @ProductID = productid @FirmwareVersion = firmwareversion @TaskId = taskid end def deserialize(params) @ProductID = params['ProductID'] @FirmwareVersion = params['FirmwareVersion'] @TaskId = params['TaskId'] end end # DescribeFirmwareTaskDistribution返回参数结构体 class DescribeFirmwareTaskDistributionResponse < TencentCloud::Common::AbstractModel # @param StatusInfos: 固件升级任务状态分布信息 # @type StatusInfos: Array # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :StatusInfos, :RequestId def initialize(statusinfos=nil, requestid=nil) @StatusInfos = statusinfos @RequestId = requestid end def deserialize(params) unless params['StatusInfos'].nil? @StatusInfos = [] params['StatusInfos'].each do |i| statusstatistic_tmp = StatusStatistic.new statusstatistic_tmp.deserialize(i) @StatusInfos << statusstatistic_tmp end end @RequestId = params['RequestId'] end end # DescribeFirmwareTask请求参数结构体 class DescribeFirmwareTaskRequest < TencentCloud::Common::AbstractModel # @param ProductID: 产品ID # @type ProductID: String # @param FirmwareVersion: 固件版本号 # @type FirmwareVersion: String # @param TaskId: 固件任务ID # @type TaskId: Integer attr_accessor :ProductID, :FirmwareVersion, :TaskId def initialize(productid=nil, firmwareversion=nil, taskid=nil) @ProductID = productid @FirmwareVersion = firmwareversion @TaskId = taskid end def deserialize(params) @ProductID = params['ProductID'] @FirmwareVersion = params['FirmwareVersion'] @TaskId = params['TaskId'] end end # DescribeFirmwareTask返回参数结构体 class DescribeFirmwareTaskResponse < TencentCloud::Common::AbstractModel # @param TaskId: 固件任务ID # 注意:此字段可能返回 null,表示取不到有效值。 # @type TaskId: Integer # @param Status: 固件任务状态 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Status: Integer # @param CreateTime: 固件任务创建时间,单位:秒 # 注意:此字段可能返回 null,表示取不到有效值。 # @type CreateTime: Integer # @param Type: 固件任务升级类型 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Type: Integer # @param ProductName: 产品名称 # 注意:此字段可能返回 null,表示取不到有效值。 # @type ProductName: String # @param UpgradeMode: 固件任务升级模式。originalVersion(按版本号升级)、filename(提交文件升级)、devicenames(按设备名称升级) # 注意:此字段可能返回 null,表示取不到有效值。 # @type UpgradeMode: String # @param ProductId: 产品ID # 注意:此字段可能返回 null,表示取不到有效值。 # @type ProductId: String # @param OriginalVersion: 原始固件版本号,在UpgradeMode是originalVersion升级模式下会返回 # 注意:此字段可能返回 null,表示取不到有效值。 # @type OriginalVersion: String # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :TaskId, :Status, :CreateTime, :Type, :ProductName, :UpgradeMode, :ProductId, :OriginalVersion, :RequestId def initialize(taskid=nil, status=nil, createtime=nil, type=nil, productname=nil, upgrademode=nil, productid=nil, originalversion=nil, requestid=nil) @TaskId = taskid @Status = status @CreateTime = createtime @Type = type @ProductName = productname @UpgradeMode = upgrademode @ProductId = productid @OriginalVersion = originalversion @RequestId = requestid end def deserialize(params) @TaskId = params['TaskId'] @Status = params['Status'] @CreateTime = params['CreateTime'] @Type = params['Type'] @ProductName = params['ProductName'] @UpgradeMode = params['UpgradeMode'] @ProductId = params['ProductId'] @OriginalVersion = params['OriginalVersion'] @RequestId = params['RequestId'] end end # DescribeFirmwareTaskStatistics请求参数结构体 class DescribeFirmwareTaskStatisticsRequest < TencentCloud::Common::AbstractModel # @param ProductID: 产品ID # @type ProductID: String # @param FirmwareVersion: 固件版本号 # @type FirmwareVersion: String attr_accessor :ProductID, :FirmwareVersion def initialize(productid=nil, firmwareversion=nil) @ProductID = productid @FirmwareVersion = firmwareversion end def deserialize(params) @ProductID = params['ProductID'] @FirmwareVersion = params['FirmwareVersion'] end end # DescribeFirmwareTaskStatistics返回参数结构体 class DescribeFirmwareTaskStatisticsResponse < TencentCloud::Common::AbstractModel # @param SuccessTotal: 升级成功的设备总数 # 注意:此字段可能返回 null,表示取不到有效值。 # @type SuccessTotal: Integer # @param FailureTotal: 升级失败的设备总数 # 注意:此字段可能返回 null,表示取不到有效值。 # @type FailureTotal: Integer # @param UpgradingTotal: 正在升级的设备总数 # 注意:此字段可能返回 null,表示取不到有效值。 # @type UpgradingTotal: Integer # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :SuccessTotal, :FailureTotal, :UpgradingTotal, :RequestId def initialize(successtotal=nil, failuretotal=nil, upgradingtotal=nil, requestid=nil) @SuccessTotal = successtotal @FailureTotal = failuretotal @UpgradingTotal = upgradingtotal @RequestId = requestid end def deserialize(params) @SuccessTotal = params['SuccessTotal'] @FailureTotal = params['FailureTotal'] @UpgradingTotal = params['UpgradingTotal'] @RequestId = params['RequestId'] end end # DescribeFirmwareTasks请求参数结构体 class DescribeFirmwareTasksRequest < TencentCloud::Common::AbstractModel # @param ProductID: 产品ID # @type ProductID: String # @param FirmwareVersion: 固件版本号 # @type FirmwareVersion: String # @param Offset: 查询偏移量 # @type Offset: Integer # @param Limit: 返回查询结果条数 # @type Limit: Integer # @param Filters: 搜索过滤条件 # @type Filters: Array attr_accessor :ProductID, :FirmwareVersion, :Offset, :Limit, :Filters def initialize(productid=nil, firmwareversion=nil, offset=nil, limit=nil, filters=nil) @ProductID = productid @FirmwareVersion = firmwareversion @Offset = offset @Limit = limit @Filters = filters end def deserialize(params) @ProductID = params['ProductID'] @FirmwareVersion = params['FirmwareVersion'] @Offset = params['Offset'] @Limit = params['Limit'] unless params['Filters'].nil? @Filters = [] params['Filters'].each do |i| searchkeyword_tmp = SearchKeyword.new searchkeyword_tmp.deserialize(i) @Filters << searchkeyword_tmp end end end end # DescribeFirmwareTasks返回参数结构体 class DescribeFirmwareTasksResponse < TencentCloud::Common::AbstractModel # @param TaskInfos: 固件升级任务列表 # 注意:此字段可能返回 null,表示取不到有效值。 # @type TaskInfos: Array # @param Total: 固件升级任务总数 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Total: Integer # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :TaskInfos, :Total, :RequestId def initialize(taskinfos=nil, total=nil, requestid=nil) @TaskInfos = taskinfos @Total = total @RequestId = requestid end def deserialize(params) unless params['TaskInfos'].nil? @TaskInfos = [] params['TaskInfos'].each do |i| firmwaretaskinfo_tmp = FirmwareTaskInfo.new firmwaretaskinfo_tmp.deserialize(i) @TaskInfos << firmwaretaskinfo_tmp end end @Total = params['Total'] @RequestId = params['RequestId'] end end # DescribeForwardRule请求参数结构体 class DescribeForwardRuleRequest < TencentCloud::Common::AbstractModel # @param ProductID: 产品ID # @type ProductID: String # @param Skey: 控制台Skey # @type Skey: String # @param QueueType: 队列类型,0:CMQ,1:Ckafka # @type QueueType: Integer # @param Consecretid: 临时密钥 # @type Consecretid: String attr_accessor :ProductID, :Skey, :QueueType, :Consecretid def initialize(productid=nil, skey=nil, queuetype=nil, consecretid=nil) @ProductID = productid @Skey = skey @QueueType = queuetype @Consecretid = consecretid end def deserialize(params) @ProductID = params['ProductID'] @Skey = params['Skey'] @QueueType = params['QueueType'] @Consecretid = params['Consecretid'] end end # DescribeForwardRule返回参数结构体 class DescribeForwardRuleResponse < TencentCloud::Common::AbstractModel # @param Endpoint: 腾讯云账号 # @type Endpoint: String # @param QueueName: 队列名称 # @type QueueName: String # @param ProductID: 产品ID # @type ProductID: String # @param MsgType: 消息类型 1设备上报信息 2设备状态变化通知 3为全选 # @type MsgType: Integer # @param Result: 结果 2表示禁用 其他为成功 # @type Result: Integer # @param RoleName: 角色名 # @type RoleName: String # @param RoleID: 角色ID # @type RoleID: Integer # @param QueueRegion: 队列区域 # @type QueueRegion: String # @param QueueType: 队列类型,0:CMQ,1:Ckafka # @type QueueType: Integer # @param InstanceId: 实例id, 目前只有Ckafaka会用到 # @type InstanceId: String # @param InstanceName: 实例名称,目前只有Ckafaka会用到 # @type InstanceName: String # @param ErrMsg: 错误消息 # @type ErrMsg: String # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Endpoint, :QueueName, :ProductID, :MsgType, :Result, :RoleName, :RoleID, :QueueRegion, :QueueType, :InstanceId, :InstanceName, :ErrMsg, :RequestId def initialize(endpoint=nil, queuename=nil, productid=nil, msgtype=nil, result=nil, rolename=nil, roleid=nil, queueregion=nil, queuetype=nil, instanceid=nil, instancename=nil, errmsg=nil, requestid=nil) @Endpoint = endpoint @QueueName = queuename @ProductID = productid @MsgType = msgtype @Result = result @RoleName = rolename @RoleID = roleid @QueueRegion = queueregion @QueueType = queuetype @InstanceId = instanceid @InstanceName = instancename @ErrMsg = errmsg @RequestId = requestid end def deserialize(params) @Endpoint = params['Endpoint'] @QueueName = params['QueueName'] @ProductID = params['ProductID'] @MsgType = params['MsgType'] @Result = params['Result'] @RoleName = params['RoleName'] @RoleID = params['RoleID'] @QueueRegion = params['QueueRegion'] @QueueType = params['QueueType'] @InstanceId = params['InstanceId'] @InstanceName = params['InstanceName'] @ErrMsg = params['ErrMsg'] @RequestId = params['RequestId'] end end # DescribeMessageDataStats请求参数结构体 class DescribeMessageDataStatsRequest < TencentCloud::Common::AbstractModel # @param StartDate: 统计开始日期 # @type StartDate: String # @param EndDate: 统计结束日期 # @type EndDate: String # @param ProductId: 产品id # @type ProductId: String attr_accessor :StartDate, :EndDate, :ProductId def initialize(startdate=nil, enddate=nil, productid=nil) @StartDate = startdate @EndDate = enddate @ProductId = productid end def deserialize(params) @StartDate = params['StartDate'] @EndDate = params['EndDate'] @ProductId = params['ProductId'] end end # DescribeMessageDataStats返回参数结构体 class DescribeMessageDataStatsResponse < TencentCloud::Common::AbstractModel # @param Data: 消息数量列表 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Data: Array # @param Total: 总数 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Total: Integer # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Data, :Total, :RequestId def initialize(data=nil, total=nil, requestid=nil) @Data = data @Total = total @RequestId = requestid end def deserialize(params) unless params['Data'].nil? @Data = [] params['Data'].each do |i| messagecntstats_tmp = MessageCntStats.new messagecntstats_tmp.deserialize(i) @Data << messagecntstats_tmp end end @Total = params['Total'] @RequestId = params['RequestId'] end end # DescribeModelDefinition请求参数结构体 class DescribeModelDefinitionRequest < TencentCloud::Common::AbstractModel # @param ProductId: 产品ID # @type ProductId: String attr_accessor :ProductId def initialize(productid=nil) @ProductId = productid end def deserialize(params) @ProductId = params['ProductId'] end end # DescribeModelDefinition返回参数结构体 class DescribeModelDefinitionResponse < TencentCloud::Common::AbstractModel # @param Model: 产品数据模板 # @type Model: :class:`Tencentcloud::Iotvideo.v20211125.models.ProductModelDefinition` # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Model, :RequestId def initialize(model=nil, requestid=nil) @Model = model @RequestId = requestid end def deserialize(params) unless params['Model'].nil? @Model = ProductModelDefinition.new @Model.deserialize(params['Model']) end @RequestId = params['RequestId'] end end # DescribePackageConsumeTask请求参数结构体 class DescribePackageConsumeTaskRequest < TencentCloud::Common::AbstractModel # @param TaskId: 任务id # @type TaskId: Integer attr_accessor :TaskId def initialize(taskid=nil) @TaskId = taskid end def deserialize(params) @TaskId = params['TaskId'] end end # DescribePackageConsumeTask返回参数结构体 class DescribePackageConsumeTaskResponse < TencentCloud::Common::AbstractModel # @param URL: 文件下载的url,文件详情是套餐包消耗详情 # @type URL: String # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :URL, :RequestId def initialize(url=nil, requestid=nil) @URL = url @RequestId = requestid end def deserialize(params) @URL = params['URL'] @RequestId = params['RequestId'] end end # DescribePackageConsumeTasks请求参数结构体 class DescribePackageConsumeTasksRequest < TencentCloud::Common::AbstractModel # @param Limit: 分页单页量 # @type Limit: Integer # @param Offset: 分页的偏移量,第一页为0 # @type Offset: Integer attr_accessor :Limit, :Offset def initialize(limit=nil, offset=nil) @Limit = limit @Offset = offset end def deserialize(params) @Limit = params['Limit'] @Offset = params['Offset'] end end # DescribePackageConsumeTasks返回参数结构体 class DescribePackageConsumeTasksResponse < TencentCloud::Common::AbstractModel # @param TotalCount: 总数 # @type TotalCount: Integer # @param List: 任务列表 # @type List: Array # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :TotalCount, :List, :RequestId def initialize(totalcount=nil, list=nil, requestid=nil) @TotalCount = totalcount @List = list @RequestId = requestid end def deserialize(params) @TotalCount = params['TotalCount'] unless params['List'].nil? @List = [] params['List'].each do |i| packageconsumetask_tmp = PackageConsumeTask.new packageconsumetask_tmp.deserialize(i) @List << packageconsumetask_tmp end end @RequestId = params['RequestId'] end end # DescribeProductDynamicRegister请求参数结构体 class DescribeProductDynamicRegisterRequest < TencentCloud::Common::AbstractModel # @param ProductId: 产品ID # @type ProductId: String attr_accessor :ProductId def initialize(productid=nil) @ProductId = productid end def deserialize(params) @ProductId = params['ProductId'] end end # DescribeProductDynamicRegister返回参数结构体 class DescribeProductDynamicRegisterResponse < TencentCloud::Common::AbstractModel # @param RegisterType: 动态注册类型,0-关闭 1-预创建设备 2-自动创建设备 # @type RegisterType: Integer # @param ProductSecret: 动态注册产品密钥 # @type ProductSecret: String # @param RegisterLimit: 动态注册设备上限 # @type RegisterLimit: Integer # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RegisterType, :ProductSecret, :RegisterLimit, :RequestId def initialize(registertype=nil, productsecret=nil, registerlimit=nil, requestid=nil) @RegisterType = registertype @ProductSecret = productsecret @RegisterLimit = registerlimit @RequestId = requestid end def deserialize(params) @RegisterType = params['RegisterType'] @ProductSecret = params['ProductSecret'] @RegisterLimit = params['RegisterLimit'] @RequestId = params['RequestId'] end end # DescribeProduct请求参数结构体 class DescribeProductRequest < TencentCloud::Common::AbstractModel # @param ProductId: 产品id # @type ProductId: String attr_accessor :ProductId def initialize(productid=nil) @ProductId = productid end def deserialize(params) @ProductId = params['ProductId'] end end # DescribeProduct返回参数结构体 class DescribeProductResponse < TencentCloud::Common::AbstractModel # @param Data: 产品详情 # @type Data: :class:`Tencentcloud::Iotvideo.v20211125.models.VideoProduct` # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Data, :RequestId def initialize(data=nil, requestid=nil) @Data = data @RequestId = requestid end def deserialize(params) unless params['Data'].nil? @Data = VideoProduct.new @Data.deserialize(params['Data']) end @RequestId = params['RequestId'] end end # DescribeProducts请求参数结构体 class DescribeProductsRequest < TencentCloud::Common::AbstractModel # @param Limit: 分页的大小,最大100 # @type Limit: Integer # @param Offset: 偏移量,Offset从0开始 # @type Offset: Integer attr_accessor :Limit, :Offset def initialize(limit=nil, offset=nil) @Limit = limit @Offset = offset end def deserialize(params) @Limit = params['Limit'] @Offset = params['Offset'] end end # DescribeProducts返回参数结构体 class DescribeProductsResponse < TencentCloud::Common::AbstractModel # @param TotalCount: 总数 # @type TotalCount: Integer # @param Data: 产品详情列表 # @type Data: Array # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :TotalCount, :Data, :RequestId def initialize(totalcount=nil, data=nil, requestid=nil) @TotalCount = totalcount @Data = data @RequestId = requestid end def deserialize(params) @TotalCount = params['TotalCount'] unless params['Data'].nil? @Data = [] params['Data'].each do |i| videoproduct_tmp = VideoProduct.new videoproduct_tmp.deserialize(i) @Data << videoproduct_tmp end end @RequestId = params['RequestId'] end end # DescribePushChannel请求参数结构体 class DescribePushChannelRequest < TencentCloud::Common::AbstractModel # @param ProductId: 产品ID # @type ProductId: String attr_accessor :ProductId def initialize(productid=nil) @ProductId = productid end def deserialize(params) @ProductId = params['ProductId'] end end # DescribePushChannel返回参数结构体 class DescribePushChannelResponse < TencentCloud::Common::AbstractModel # @param Type: 推送类型。ckafka:消息队列;forward:http/https推送 # @type Type: String # @param ForwardAddress: 第三方推送地址 # 注意:此字段可能返回 null,表示取不到有效值。 # @type ForwardAddress: String # @param ForwardKey: 第三方推送密钥,为空表示不使用鉴权token。 # 注意:此字段可能返回 null,表示取不到有效值。 # @type ForwardKey: String # @param CKafkaRegion: ckafka地域 # 注意:此字段可能返回 null,表示取不到有效值。 # @type CKafkaRegion: String # @param CKafkaInstance: ckafka实例 # 注意:此字段可能返回 null,表示取不到有效值。 # @type CKafkaInstance: String # @param CKafkaTopic: ckafka订阅主题 # 注意:此字段可能返回 null,表示取不到有效值。 # @type CKafkaTopic: String # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Type, :ForwardAddress, :ForwardKey, :CKafkaRegion, :CKafkaInstance, :CKafkaTopic, :RequestId def initialize(type=nil, forwardaddress=nil, forwardkey=nil, ckafkaregion=nil, ckafkainstance=nil, ckafkatopic=nil, requestid=nil) @Type = type @ForwardAddress = forwardaddress @ForwardKey = forwardkey @CKafkaRegion = ckafkaregion @CKafkaInstance = ckafkainstance @CKafkaTopic = ckafkatopic @RequestId = requestid end def deserialize(params) @Type = params['Type'] @ForwardAddress = params['ForwardAddress'] @ForwardKey = params['ForwardKey'] @CKafkaRegion = params['CKafkaRegion'] @CKafkaInstance = params['CKafkaInstance'] @CKafkaTopic = params['CKafkaTopic'] @RequestId = params['RequestId'] end end # DescribeSDKLog请求参数结构体 class DescribeSDKLogRequest < TencentCloud::Common::AbstractModel # @param MinTime: 日志开始时间 # @type MinTime: Integer # @param MaxTime: 日志结束时间 # @type MaxTime: Integer # @param Keywords: 查询关键字,可以同时支持键值查询和文本查询, # 例如,查询某key的值为value,并且包含某word的日志,该参数为:key:value word。 # 键值或文本可以包含多个,以空格隔开。 # 其中可以索引的key包括:productid、devicename、loglevel # 一个典型的查询示例:productid:7JK1G72JNE devicename:name publish loglevel:WARN一个典型的查询示例:productid:ABCDE12345 devicename:test scene:SHADOW publish # @type Keywords: String # @param Context: 日志检索上下文 # @type Context: String # @param MaxNum: 查询条数 # @type MaxNum: Integer attr_accessor :MinTime, :MaxTime, :Keywords, :Context, :MaxNum def initialize(mintime=nil, maxtime=nil, keywords=nil, context=nil, maxnum=nil) @MinTime = mintime @MaxTime = maxtime @Keywords = keywords @Context = context @MaxNum = maxnum end def deserialize(params) @MinTime = params['MinTime'] @MaxTime = params['MaxTime'] @Keywords = params['Keywords'] @Context = params['Context'] @MaxNum = params['MaxNum'] end end # DescribeSDKLog返回参数结构体 class DescribeSDKLogResponse < TencentCloud::Common::AbstractModel # @param Context: 日志检索上下文 # @type Context: String # @param Listover: 是否还有日志,如有仍有日志,下次查询的请求带上当前请求返回的Context # @type Listover: Boolean # @param Results: 日志列表 # @type Results: Array # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Context, :Listover, :Results, :RequestId def initialize(context=nil, listover=nil, results=nil, requestid=nil) @Context = context @Listover = listover @Results = results @RequestId = requestid end def deserialize(params) @Context = params['Context'] @Listover = params['Listover'] unless params['Results'].nil? @Results = [] params['Results'].each do |i| sdklogitem_tmp = SDKLogItem.new sdklogitem_tmp.deserialize(i) @Results << sdklogitem_tmp end end @RequestId = params['RequestId'] end end # DescribeUser请求参数结构体 class DescribeUserRequest < TencentCloud::Common::AbstractModel def initialize() end def deserialize(params) end end # DescribeUser返回参数结构体 class DescribeUserResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # 设备数量统计 class DeviceCntStats < TencentCloud::Common::AbstractModel # @param Date: 统计日期 # @type Date: String # @param NewRegisterCnt: 新增注册设备数 # 注意:此字段可能返回 null,表示取不到有效值。 # @type NewRegisterCnt: Integer # @param NewActivateCnt: 新增激活设备数 # 注意:此字段可能返回 null,表示取不到有效值。 # @type NewActivateCnt: Integer # @param ActiveCnt: 活跃设备数 # 注意:此字段可能返回 null,表示取不到有效值。 # @type ActiveCnt: Integer attr_accessor :Date, :NewRegisterCnt, :NewActivateCnt, :ActiveCnt def initialize(date=nil, newregistercnt=nil, newactivatecnt=nil, activecnt=nil) @Date = date @NewRegisterCnt = newregistercnt @NewActivateCnt = newactivatecnt @ActiveCnt = activecnt end def deserialize(params) @Date = params['Date'] @NewRegisterCnt = params['NewRegisterCnt'] @NewActivateCnt = params['NewActivateCnt'] @ActiveCnt = params['ActiveCnt'] end end # 设备通讯日志查询返回条目 class DeviceCommLogItem < TencentCloud::Common::AbstractModel # @param Time: 时间 # @type Time: String # @param Type: 日志类型,device 设备上行,shadow 服务端下行。 # @type Type: String # @param Data: 通讯数据。 # @type Data: String attr_accessor :Time, :Type, :Data def initialize(time=nil, type=nil, data=nil) @Time = time @Type = type @Data = data end def deserialize(params) @Time = params['Time'] @Type = params['Type'] @Data = params['Data'] end end # 设备历史数据结构 class DeviceDataHistoryItem < TencentCloud::Common::AbstractModel # @param Time: 时间点,毫秒时间戳 # @type Time: String # @param Value: 字段取值 # @type Value: String attr_accessor :Time, :Value def initialize(time=nil, value=nil) @Time = time @Value = value end def deserialize(params) @Time = params['Time'] @Value = params['Value'] end end # 设备详细信息 class DeviceInfo < TencentCloud::Common::AbstractModel # @param DeviceName: 设备名 # @type DeviceName: String # @param Online: 设备是否在线,0不在线,1在线,2获取失败,3未激活 # @type Online: Integer # @param LoginTime: 设备最后上线时间 # @type LoginTime: Integer # @param DevicePsk: 设备密钥 # @type DevicePsk: String # @param EnableState: 设备启用状态 0为停用 1为可用 # @type EnableState: Integer # @param ExpireTime: 设备过期时间 # @type ExpireTime: Integer attr_accessor :DeviceName, :Online, :LoginTime, :DevicePsk, :EnableState, :ExpireTime def initialize(devicename=nil, online=nil, logintime=nil, devicepsk=nil, enablestate=nil, expiretime=nil) @DeviceName = devicename @Online = online @LoginTime = logintime @DevicePsk = devicepsk @EnableState = enablestate @ExpireTime = expiretime end def deserialize(params) @DeviceName = params['DeviceName'] @Online = params['Online'] @LoginTime = params['LoginTime'] @DevicePsk = params['DevicePsk'] @EnableState = params['EnableState'] @ExpireTime = params['ExpireTime'] end end # 设备签名信息 class DeviceSignatureInfo < TencentCloud::Common::AbstractModel # @param DeviceName: 设备名称 # @type DeviceName: String # @param DeviceSignature: 设备签名 # @type DeviceSignature: String attr_accessor :DeviceName, :DeviceSignature def initialize(devicename=nil, devicesignature=nil) @DeviceName = devicename @DeviceSignature = devicesignature end def deserialize(params) @DeviceName = params['DeviceName'] @DeviceSignature = params['DeviceSignature'] end end # 设备上下线日志记录 class DeviceStatusLogItem < TencentCloud::Common::AbstractModel # @param Time: 时间 # @type Time: String # @param Type: 状态类型: Online 上线,Offline 下线 # @type Type: String # @param Data: 日志信息 # @type Data: String attr_accessor :Time, :Type, :Data def initialize(time=nil, type=nil, data=nil) @Time = time @Type = type @Data = data end def deserialize(params) @Time = params['Time'] @Type = params['Type'] @Data = params['Data'] end end # 设备固件更新状态 class DeviceUpdateStatus < TencentCloud::Common::AbstractModel # @param DeviceName: 设备名 # @type DeviceName: String # @param LastProcessTime: 最后处理时间 # @type LastProcessTime: Integer # @param Status: 状态 # @type Status: Integer # @param ErrMsg: 错误消息 # @type ErrMsg: String # @param Retcode: 返回码 # @type Retcode: Integer # @param DstVersion: 目标更新版本 # @type DstVersion: String # @param Percent: 下载中状态时的下载进度 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Percent: Integer # @param OriVersion: 原版本号 # 注意:此字段可能返回 null,表示取不到有效值。 # @type OriVersion: String # @param TaskId: 任务ID # 注意:此字段可能返回 null,表示取不到有效值。 # @type TaskId: Integer attr_accessor :DeviceName, :LastProcessTime, :Status, :ErrMsg, :Retcode, :DstVersion, :Percent, :OriVersion, :TaskId def initialize(devicename=nil, lastprocesstime=nil, status=nil, errmsg=nil, retcode=nil, dstversion=nil, percent=nil, oriversion=nil, taskid=nil) @DeviceName = devicename @LastProcessTime = lastprocesstime @Status = status @ErrMsg = errmsg @Retcode = retcode @DstVersion = dstversion @Percent = percent @OriVersion = oriversion @TaskId = taskid end def deserialize(params) @DeviceName = params['DeviceName'] @LastProcessTime = params['LastProcessTime'] @Status = params['Status'] @ErrMsg = params['ErrMsg'] @Retcode = params['Retcode'] @DstVersion = params['DstVersion'] @Percent = params['Percent'] @OriVersion = params['OriVersion'] @TaskId = params['TaskId'] end end # EditFirmware请求参数结构体 class EditFirmwareRequest < TencentCloud::Common::AbstractModel # @param ProductID: 产品ID。 # @type ProductID: String # @param FirmwareVersion: 固件版本号。 # @type FirmwareVersion: String # @param FirmwareName: 固件名称。 # @type FirmwareName: String # @param FirmwareDescription: 固件描述。 # @type FirmwareDescription: String attr_accessor :ProductID, :FirmwareVersion, :FirmwareName, :FirmwareDescription def initialize(productid=nil, firmwareversion=nil, firmwarename=nil, firmwaredescription=nil) @ProductID = productid @FirmwareVersion = firmwareversion @FirmwareName = firmwarename @FirmwareDescription = firmwaredescription end def deserialize(params) @ProductID = params['ProductID'] @FirmwareVersion = params['FirmwareVersion'] @FirmwareName = params['FirmwareName'] @FirmwareDescription = params['FirmwareDescription'] end end # EditFirmware返回参数结构体 class EditFirmwareResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # 设备事件的搜索结果项 class EventHistoryItem < TencentCloud::Common::AbstractModel # @param TimeStamp: 事件的时间戳 # 注意:此字段可能返回 null,表示取不到有效值。 # @type TimeStamp: Integer # @param ProductId: 事件的产品ID # 注意:此字段可能返回 null,表示取不到有效值。 # @type ProductId: String # @param DeviceName: 事件的设备名称 # 注意:此字段可能返回 null,表示取不到有效值。 # @type DeviceName: String # @param EventId: 事件的标识符ID # 注意:此字段可能返回 null,表示取不到有效值。 # @type EventId: String # @param Type: 事件的类型 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Type: String # @param Data: 事件的数据 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Data: String attr_accessor :TimeStamp, :ProductId, :DeviceName, :EventId, :Type, :Data def initialize(timestamp=nil, productid=nil, devicename=nil, eventid=nil, type=nil, data=nil) @TimeStamp = timestamp @ProductId = productid @DeviceName = devicename @EventId = eventid @Type = type @Data = data end def deserialize(params) @TimeStamp = params['TimeStamp'] @ProductId = params['ProductId'] @DeviceName = params['DeviceName'] @EventId = params['EventId'] @Type = params['Type'] @Data = params['Data'] end end # 设备固件详细信息 class FirmwareInfo < TencentCloud::Common::AbstractModel # @param Version: 固件版本 # @type Version: String # @param Md5sum: 固件MD5值 # @type Md5sum: String # @param CreateTime: 固件创建时间 # @type CreateTime: Integer # @param ProductName: 产品名称 # @type ProductName: String # @param Name: 固件名称 # @type Name: String # @param Description: 固件描述 # @type Description: String # @param ProductId: 产品ID # @type ProductId: String # @param FwType: 固件升级模块 # 注意:此字段可能返回 null,表示取不到有效值。 # @type FwType: String attr_accessor :Version, :Md5sum, :CreateTime, :ProductName, :Name, :Description, :ProductId, :FwType def initialize(version=nil, md5sum=nil, createtime=nil, productname=nil, name=nil, description=nil, productid=nil, fwtype=nil) @Version = version @Md5sum = md5sum @CreateTime = createtime @ProductName = productname @Name = name @Description = description @ProductId = productid @FwType = fwtype end def deserialize(params) @Version = params['Version'] @Md5sum = params['Md5sum'] @CreateTime = params['CreateTime'] @ProductName = params['ProductName'] @Name = params['Name'] @Description = params['Description'] @ProductId = params['ProductId'] @FwType = params['FwType'] end end # 固件升级任务信息 class FirmwareTaskInfo < TencentCloud::Common::AbstractModel # @param TaskId: 任务ID # 注意:此字段可能返回 null,表示取不到有效值。 # @type TaskId: Integer # @param Status: 任务状态 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Status: Integer # @param Type: 任务类型 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Type: Integer # @param CreateTime: 任务创建时间 # 注意:此字段可能返回 null,表示取不到有效值。 # @type CreateTime: Integer attr_accessor :TaskId, :Status, :Type, :CreateTime def initialize(taskid=nil, status=nil, type=nil, createtime=nil) @TaskId = taskid @Status = status @Type = type @CreateTime = createtime end def deserialize(params) @TaskId = params['TaskId'] @Status = params['Status'] @Type = params['Type'] @CreateTime = params['CreateTime'] end end # GenSingleDeviceSignatureOfPublic请求参数结构体 class GenSingleDeviceSignatureOfPublicRequest < TencentCloud::Common::AbstractModel # @param ProductId: 设备所属的产品ID # @type ProductId: String # @param DeviceName: 需要绑定的设备 # @type DeviceName: String # @param Expire: 设备绑定签名的有效时间,以秒为单位。取值范围:0 < Expire <= 86400,Expire == -1(十年) # @type Expire: Integer attr_accessor :ProductId, :DeviceName, :Expire def initialize(productid=nil, devicename=nil, expire=nil) @ProductId = productid @DeviceName = devicename @Expire = expire end def deserialize(params) @ProductId = params['ProductId'] @DeviceName = params['DeviceName'] @Expire = params['Expire'] end end # GenSingleDeviceSignatureOfPublic返回参数结构体 class GenSingleDeviceSignatureOfPublicResponse < TencentCloud::Common::AbstractModel # @param DeviceSignature: 设备签名信息 # @type DeviceSignature: :class:`Tencentcloud::Iotvideo.v20211125.models.DeviceSignatureInfo` # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :DeviceSignature, :RequestId def initialize(devicesignature=nil, requestid=nil) @DeviceSignature = devicesignature @RequestId = requestid end def deserialize(params) unless params['DeviceSignature'].nil? @DeviceSignature = DeviceSignatureInfo.new @DeviceSignature.deserialize(params['DeviceSignature']) end @RequestId = params['RequestId'] end end # GenerateSignedVideoURL请求参数结构体 class GenerateSignedVideoURLRequest < TencentCloud::Common::AbstractModel # @param VideoURL: 视频播放原始URL地址 # @type VideoURL: String # @param ExpireTime: 播放链接过期时间 # @type ExpireTime: Integer attr_accessor :VideoURL, :ExpireTime def initialize(videourl=nil, expiretime=nil) @VideoURL = videourl @ExpireTime = expiretime end def deserialize(params) @VideoURL = params['VideoURL'] @ExpireTime = params['ExpireTime'] end end # GenerateSignedVideoURL返回参数结构体 class GenerateSignedVideoURLResponse < TencentCloud::Common::AbstractModel # @param SignedVideoURL: 视频防盗链播放URL # @type SignedVideoURL: String # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :SignedVideoURL, :RequestId def initialize(signedvideourl=nil, requestid=nil) @SignedVideoURL = signedvideourl @RequestId = requestid end def deserialize(params) @SignedVideoURL = params['SignedVideoURL'] @RequestId = params['RequestId'] end end # GetAllFirmwareVersion请求参数结构体 class GetAllFirmwareVersionRequest < TencentCloud::Common::AbstractModel # @param ProductID: 产品ID # @type ProductID: String attr_accessor :ProductID def initialize(productid=nil) @ProductID = productid end def deserialize(params) @ProductID = params['ProductID'] end end # GetAllFirmwareVersion返回参数结构体 class GetAllFirmwareVersionResponse < TencentCloud::Common::AbstractModel # @param Version: 固件可用版本列表 # @type Version: Array # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Version, :RequestId def initialize(version=nil, requestid=nil) @Version = version @RequestId = requestid end def deserialize(params) @Version = params['Version'] @RequestId = params['RequestId'] end end # GetFirmwareURL请求参数结构体 class GetFirmwareURLRequest < TencentCloud::Common::AbstractModel # @param ProductID: 产品ID # @type ProductID: String # @param FirmwareVersion: 固件版本 # @type FirmwareVersion: String attr_accessor :ProductID, :FirmwareVersion def initialize(productid=nil, firmwareversion=nil) @ProductID = productid @FirmwareVersion = firmwareversion end def deserialize(params) @ProductID = params['ProductID'] @FirmwareVersion = params['FirmwareVersion'] end end # GetFirmwareURL返回参数结构体 class GetFirmwareURLResponse < TencentCloud::Common::AbstractModel # @param Url: 固件URL # @type Url: String # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Url, :RequestId def initialize(url=nil, requestid=nil) @Url = url @RequestId = requestid end def deserialize(params) @Url = params['Url'] @RequestId = params['RequestId'] end end # ImportModelDefinition请求参数结构体 class ImportModelDefinitionRequest < TencentCloud::Common::AbstractModel # @param ProductId: 产品ID # @type ProductId: String # @param ModelSchema: 数据模板定义 # @type ModelSchema: String attr_accessor :ProductId, :ModelSchema def initialize(productid=nil, modelschema=nil) @ProductId = productid @ModelSchema = modelschema end def deserialize(params) @ProductId = params['ProductId'] @ModelSchema = params['ModelSchema'] end end # ImportModelDefinition返回参数结构体 class ImportModelDefinitionResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # InheritCloudStorageUser请求参数结构体 class InheritCloudStorageUserRequest < TencentCloud::Common::AbstractModel # @param ProductId: 产品ID # @type ProductId: String # @param DeviceName: 设备名称 # @type DeviceName: String # @param UserId: 原始用户ID # @type UserId: String # @param ToUserId: 目标用户ID # @type ToUserId: String attr_accessor :ProductId, :DeviceName, :UserId, :ToUserId def initialize(productid=nil, devicename=nil, userid=nil, touserid=nil) @ProductId = productid @DeviceName = devicename @UserId = userid @ToUserId = touserid end def deserialize(params) @ProductId = params['ProductId'] @DeviceName = params['DeviceName'] @UserId = params['UserId'] @ToUserId = params['ToUserId'] end end # InheritCloudStorageUser返回参数结构体 class InheritCloudStorageUserResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # ListFirmwares请求参数结构体 class ListFirmwaresRequest < TencentCloud::Common::AbstractModel # @param PageNum: 获取的页数 # @type PageNum: Integer # @param PageSize: 分页的大小 # @type PageSize: Integer # @param ProductID: 产品ID # @type ProductID: String # @param Filters: 搜索过滤条件 # @type Filters: Array attr_accessor :PageNum, :PageSize, :ProductID, :Filters def initialize(pagenum=nil, pagesize=nil, productid=nil, filters=nil) @PageNum = pagenum @PageSize = pagesize @ProductID = productid @Filters = filters end def deserialize(params) @PageNum = params['PageNum'] @PageSize = params['PageSize'] @ProductID = params['ProductID'] unless params['Filters'].nil? @Filters = [] params['Filters'].each do |i| searchkeyword_tmp = SearchKeyword.new searchkeyword_tmp.deserialize(i) @Filters << searchkeyword_tmp end end end end # ListFirmwares返回参数结构体 class ListFirmwaresResponse < TencentCloud::Common::AbstractModel # @param TotalCount: 固件总数 # @type TotalCount: Integer # @param Firmwares: 固件列表 # @type Firmwares: Array # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :TotalCount, :Firmwares, :RequestId def initialize(totalcount=nil, firmwares=nil, requestid=nil) @TotalCount = totalcount @Firmwares = firmwares @RequestId = requestid end def deserialize(params) @TotalCount = params['TotalCount'] unless params['Firmwares'].nil? @Firmwares = [] params['Firmwares'].each do |i| firmwareinfo_tmp = FirmwareInfo.new firmwareinfo_tmp.deserialize(i) @Firmwares << firmwareinfo_tmp end end @RequestId = params['RequestId'] end end # 消息数量统计 class MessageCntStats < TencentCloud::Common::AbstractModel # @param Date: 统计日期 # @type Date: String # @param UpMsgCnt: 物模型上行消息数 # 注意:此字段可能返回 null,表示取不到有效值。 # @type UpMsgCnt: Integer # @param DownMsgCnt: 物模型下行消息数 # 注意:此字段可能返回 null,表示取不到有效值。 # @type DownMsgCnt: Integer # @param NtpMsgCnt: ntp消息数 # 注意:此字段可能返回 null,表示取不到有效值。 # @type NtpMsgCnt: Integer attr_accessor :Date, :UpMsgCnt, :DownMsgCnt, :NtpMsgCnt def initialize(date=nil, upmsgcnt=nil, downmsgcnt=nil, ntpmsgcnt=nil) @Date = date @UpMsgCnt = upmsgcnt @DownMsgCnt = downmsgcnt @NtpMsgCnt = ntpmsgcnt end def deserialize(params) @Date = params['Date'] @UpMsgCnt = params['UpMsgCnt'] @DownMsgCnt = params['DownMsgCnt'] @NtpMsgCnt = params['NtpMsgCnt'] end end # ModifyDataForward请求参数结构体 class ModifyDataForwardRequest < TencentCloud::Common::AbstractModel # @param ProductId: 产品ID。 # @type ProductId: String # @param ForwardAddr: 转发地址。如果有鉴权Token,则需要自行传入,例如 [{\"forward\":{\"api\":\"http://123.207.117.108:1080/sub.php\",\"token\":\"testtoken\"}}] # @type ForwardAddr: String # @param DataChose: 1-数据信息转发 2-设备上下线状态转发 3-数据信息转发&设备上下线状态转发 # @type DataChose: Integer attr_accessor :ProductId, :ForwardAddr, :DataChose def initialize(productid=nil, forwardaddr=nil, datachose=nil) @ProductId = productid @ForwardAddr = forwardaddr @DataChose = datachose end def deserialize(params) @ProductId = params['ProductId'] @ForwardAddr = params['ForwardAddr'] @DataChose = params['DataChose'] end end # ModifyDataForward返回参数结构体 class ModifyDataForwardResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # ModifyDataForwardStatus请求参数结构体 class ModifyDataForwardStatusRequest < TencentCloud::Common::AbstractModel # @param ProductId: 产品ID。 # @type ProductId: String # @param Status: 转发状态,1启用,0禁用。 # @type Status: Integer attr_accessor :ProductId, :Status def initialize(productid=nil, status=nil) @ProductId = productid @Status = status end def deserialize(params) @ProductId = params['ProductId'] @Status = params['Status'] end end # ModifyDataForwardStatus返回参数结构体 class ModifyDataForwardStatusResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # ModifyDeviceLogLevel请求参数结构体 class ModifyDeviceLogLevelRequest < TencentCloud::Common::AbstractModel # @param ProductId: 产品ID # @type ProductId: String # @param DeviceName: 设备名称 # @type DeviceName: String # @param LogLevel: 日志级别,0:关闭,1:错误,2:告警,3:信息,4:调试 # @type LogLevel: Integer attr_accessor :ProductId, :DeviceName, :LogLevel def initialize(productid=nil, devicename=nil, loglevel=nil) @ProductId = productid @DeviceName = devicename @LogLevel = loglevel end def deserialize(params) @ProductId = params['ProductId'] @DeviceName = params['DeviceName'] @LogLevel = params['LogLevel'] end end # ModifyDeviceLogLevel返回参数结构体 class ModifyDeviceLogLevelResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # ModifyDevice请求参数结构体 class ModifyDeviceRequest < TencentCloud::Common::AbstractModel # @param ProductId: 设备所属产品id # @type ProductId: String # @param DeviceName: 设备名称 # @type DeviceName: String # @param EnableState: 要设置的设备状态,1为启用,0为禁用 # @type EnableState: Integer attr_accessor :ProductId, :DeviceName, :EnableState def initialize(productid=nil, devicename=nil, enablestate=nil) @ProductId = productid @DeviceName = devicename @EnableState = enablestate end def deserialize(params) @ProductId = params['ProductId'] @DeviceName = params['DeviceName'] @EnableState = params['EnableState'] end end # ModifyDevice返回参数结构体 class ModifyDeviceResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # ModifyForwardRule请求参数结构体 class ModifyForwardRuleRequest < TencentCloud::Common::AbstractModel # @param ProductID: 产品ID # @type ProductID: String # @param MsgType: 消息类型 # @type MsgType: Integer # @param Skey: 控制台Skey # @type Skey: String # @param QueueRegion: 队列区域 # @type QueueRegion: String # @param QueueType: 队列类型 0.CMQ 1.CKafka # @type QueueType: Integer # @param Consecretid: 临时密钥 # @type Consecretid: String # @param InstanceId: 实例ID # @type InstanceId: String # @param InstanceName: 实例名称 # @type InstanceName: String # @param QueueID: 队列或主题ID # @type QueueID: String # @param QueueName: 队列或主题名称 # @type QueueName: String attr_accessor :ProductID, :MsgType, :Skey, :QueueRegion, :QueueType, :Consecretid, :InstanceId, :InstanceName, :QueueID, :QueueName def initialize(productid=nil, msgtype=nil, skey=nil, queueregion=nil, queuetype=nil, consecretid=nil, instanceid=nil, instancename=nil, queueid=nil, queuename=nil) @ProductID = productid @MsgType = msgtype @Skey = skey @QueueRegion = queueregion @QueueType = queuetype @Consecretid = consecretid @InstanceId = instanceid @InstanceName = instancename @QueueID = queueid @QueueName = queuename end def deserialize(params) @ProductID = params['ProductID'] @MsgType = params['MsgType'] @Skey = params['Skey'] @QueueRegion = params['QueueRegion'] @QueueType = params['QueueType'] @Consecretid = params['Consecretid'] @InstanceId = params['InstanceId'] @InstanceName = params['InstanceName'] @QueueID = params['QueueID'] @QueueName = params['QueueName'] end end # ModifyForwardRule返回参数结构体 class ModifyForwardRuleResponse < TencentCloud::Common::AbstractModel # @param Endpoint: 腾讯云账号 # @type Endpoint: String # @param ProductID: 产品ID # @type ProductID: String # @param Result: 结果 # @type Result: Integer # @param ErrMsg: 错误信息 # @type ErrMsg: String # @param QueueType: 队列类型 0.CMQ 1.CKafka # @type QueueType: Integer # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Endpoint, :ProductID, :Result, :ErrMsg, :QueueType, :RequestId def initialize(endpoint=nil, productid=nil, result=nil, errmsg=nil, queuetype=nil, requestid=nil) @Endpoint = endpoint @ProductID = productid @Result = result @ErrMsg = errmsg @QueueType = queuetype @RequestId = requestid end def deserialize(params) @Endpoint = params['Endpoint'] @ProductID = params['ProductID'] @Result = params['Result'] @ErrMsg = params['ErrMsg'] @QueueType = params['QueueType'] @RequestId = params['RequestId'] end end # ModifyModelDefinition请求参数结构体 class ModifyModelDefinitionRequest < TencentCloud::Common::AbstractModel # @param ProductId: 产品ID # @type ProductId: String # @param ModelSchema: 数据模板定义 # @type ModelSchema: String attr_accessor :ProductId, :ModelSchema def initialize(productid=nil, modelschema=nil) @ProductId = productid @ModelSchema = modelschema end def deserialize(params) @ProductId = params['ProductId'] @ModelSchema = params['ModelSchema'] end end # ModifyModelDefinition返回参数结构体 class ModifyModelDefinitionResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # ModifyProductDynamicRegister请求参数结构体 class ModifyProductDynamicRegisterRequest < TencentCloud::Common::AbstractModel # @param ProductId: 产品ID # @type ProductId: String # @param RegisterType: 动态注册类型,0-关闭 1-预创建设备 2-自动创建设备 # @type RegisterType: Integer # @param RegisterLimit: 动态注册设备上限 # @type RegisterLimit: Integer attr_accessor :ProductId, :RegisterType, :RegisterLimit def initialize(productid=nil, registertype=nil, registerlimit=nil) @ProductId = productid @RegisterType = registertype @RegisterLimit = registerlimit end def deserialize(params) @ProductId = params['ProductId'] @RegisterType = params['RegisterType'] @RegisterLimit = params['RegisterLimit'] end end # ModifyProductDynamicRegister返回参数结构体 class ModifyProductDynamicRegisterResponse < TencentCloud::Common::AbstractModel # @param RegisterType: 动态注册类型,0-关闭 1-预创建设备 2-自动创建设备 # @type RegisterType: Integer # @param ProductSecret: 动态注册产品密钥 # @type ProductSecret: String # @param RegisterLimit: 动态注册设备上限 # @type RegisterLimit: Integer # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RegisterType, :ProductSecret, :RegisterLimit, :RequestId def initialize(registertype=nil, productsecret=nil, registerlimit=nil, requestid=nil) @RegisterType = registertype @ProductSecret = productsecret @RegisterLimit = registerlimit @RequestId = requestid end def deserialize(params) @RegisterType = params['RegisterType'] @ProductSecret = params['ProductSecret'] @RegisterLimit = params['RegisterLimit'] @RequestId = params['RequestId'] end end # ModifyProduct请求参数结构体 class ModifyProductRequest < TencentCloud::Common::AbstractModel # @param ProductId: 产品id # @type ProductId: String # @param ProductName: 修改的产品名称 (支持中文、英文、数字、下划线组合,最多不超过20个字符) # @type ProductName: String # @param ProductDescription: 修改的产品描述 (最多不超过128个字符) # @type ProductDescription: String attr_accessor :ProductId, :ProductName, :ProductDescription def initialize(productid=nil, productname=nil, productdescription=nil) @ProductId = productid @ProductName = productname @ProductDescription = productdescription end def deserialize(params) @ProductId = params['ProductId'] @ProductName = params['ProductName'] @ProductDescription = params['ProductDescription'] end end # ModifyProduct返回参数结构体 class ModifyProductResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # ModifyPushChannel请求参数结构体 class ModifyPushChannelRequest < TencentCloud::Common::AbstractModel # @param ProductId: 产品ID # @type ProductId: String # @param Type: 推送类型。ckafka:消息队列;forward:http/https推送 # @type Type: String # @param ForwardAddress: 第三方推送地址 # @type ForwardAddress: String # @param ForwardKey: 第三方推送密钥,不填写则不生成签名。 # @type ForwardKey: String # @param CKafkaRegion: ckafka地域 # @type CKafkaRegion: String # @param CKafkaInstance: ckafka实例 # @type CKafkaInstance: String # @param CKafkaTopic: ckafka订阅主题 # @type CKafkaTopic: String attr_accessor :ProductId, :Type, :ForwardAddress, :ForwardKey, :CKafkaRegion, :CKafkaInstance, :CKafkaTopic def initialize(productid=nil, type=nil, forwardaddress=nil, forwardkey=nil, ckafkaregion=nil, ckafkainstance=nil, ckafkatopic=nil) @ProductId = productid @Type = type @ForwardAddress = forwardaddress @ForwardKey = forwardkey @CKafkaRegion = ckafkaregion @CKafkaInstance = ckafkainstance @CKafkaTopic = ckafkatopic end def deserialize(params) @ProductId = params['ProductId'] @Type = params['Type'] @ForwardAddress = params['ForwardAddress'] @ForwardKey = params['ForwardKey'] @CKafkaRegion = params['CKafkaRegion'] @CKafkaInstance = params['CKafkaInstance'] @CKafkaTopic = params['CKafkaTopic'] end end # ModifyPushChannel返回参数结构体 class ModifyPushChannelResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # 云存套餐包消耗统计 class PackageConsumeStat < TencentCloud::Common::AbstractModel # @param PackageId: 云存套餐包id # @type PackageId: String # @param PackageName: 云存套餐包名称 # @type PackageName: String # @param Cnt: 消耗个数 # @type Cnt: Integer # @param Price: 套餐包单价,单位分 # @type Price: Integer # @param Source: 消耗来源,1预付费 # @type Source: Integer attr_accessor :PackageId, :PackageName, :Cnt, :Price, :Source def initialize(packageid=nil, packagename=nil, cnt=nil, price=nil, source=nil) @PackageId = packageid @PackageName = packagename @Cnt = cnt @Price = price @Source = source end def deserialize(params) @PackageId = params['PackageId'] @PackageName = params['PackageName'] @Cnt = params['Cnt'] @Price = params['Price'] @Source = params['Source'] end end # 套餐包消耗任务列表 class PackageConsumeTask < TencentCloud::Common::AbstractModel # @param TaskId: 任务id # @type TaskId: Integer # @param CreateTime: 任务创始时间 # @type CreateTime: String # @param State: 任务状态,1待处理,2处理中,3已完成 # @type State: Integer attr_accessor :TaskId, :CreateTime, :State def initialize(taskid=nil, createtime=nil, state=nil) @TaskId = taskid @CreateTime = createtime @State = state end def deserialize(params) @TaskId = params['TaskId'] @CreateTime = params['CreateTime'] @State = params['State'] end end # 产品模型定义 class ProductModelDefinition < TencentCloud::Common::AbstractModel # @param ProductId: 产品ID # @type ProductId: String # @param ModelDefine: 模型定义 # @type ModelDefine: String # @param UpdateTime: 更新时间,秒级时间戳 # @type UpdateTime: Integer # @param CreateTime: 创建时间,秒级时间戳 # @type CreateTime: Integer # @param CategoryModel: 产品所属分类的模型快照(产品创建时刻的) # 注意:此字段可能返回 null,表示取不到有效值。 # @type CategoryModel: String # @param NetTypeModel: 产品的连接类型的模型 # 注意:此字段可能返回 null,表示取不到有效值。 # @type NetTypeModel: String attr_accessor :ProductId, :ModelDefine, :UpdateTime, :CreateTime, :CategoryModel, :NetTypeModel def initialize(productid=nil, modeldefine=nil, updatetime=nil, createtime=nil, categorymodel=nil, nettypemodel=nil) @ProductId = productid @ModelDefine = modeldefine @UpdateTime = updatetime @CreateTime = createtime @CategoryModel = categorymodel @NetTypeModel = nettypemodel end def deserialize(params) @ProductId = params['ProductId'] @ModelDefine = params['ModelDefine'] @UpdateTime = params['UpdateTime'] @CreateTime = params['CreateTime'] @CategoryModel = params['CategoryModel'] @NetTypeModel = params['NetTypeModel'] end end # 产品分类实体 class ProductTemplate < TencentCloud::Common::AbstractModel # @param Id: 实体ID # @type Id: Integer # @param CategoryKey: 分类字段 # @type CategoryKey: String # @param CategoryName: 分类名称 # @type CategoryName: String # @param ParentId: 上层实体ID # @type ParentId: Integer # @param ModelTemplate: 物模型 # @type ModelTemplate: String # @param ListOrder: 排列顺序 # 注意:此字段可能返回 null,表示取不到有效值。 # @type ListOrder: Integer # @param IconUrl: 分类图标地址 # 注意:此字段可能返回 null,表示取不到有效值。 # @type IconUrl: String # @param IconUrlGrid: 九宫格图片地址 # 注意:此字段可能返回 null,表示取不到有效值。 # @type IconUrlGrid: String attr_accessor :Id, :CategoryKey, :CategoryName, :ParentId, :ModelTemplate, :ListOrder, :IconUrl, :IconUrlGrid def initialize(id=nil, categorykey=nil, categoryname=nil, parentid=nil, modeltemplate=nil, listorder=nil, iconurl=nil, iconurlgrid=nil) @Id = id @CategoryKey = categorykey @CategoryName = categoryname @ParentId = parentid @ModelTemplate = modeltemplate @ListOrder = listorder @IconUrl = iconurl @IconUrlGrid = iconurlgrid end def deserialize(params) @Id = params['Id'] @CategoryKey = params['CategoryKey'] @CategoryName = params['CategoryName'] @ParentId = params['ParentId'] @ModelTemplate = params['ModelTemplate'] @ListOrder = params['ListOrder'] @IconUrl = params['IconUrl'] @IconUrlGrid = params['IconUrlGrid'] end end # PublishMessage请求参数结构体 class PublishMessageRequest < TencentCloud::Common::AbstractModel # @param ProductId: 产品ID # @type ProductId: String # @param DeviceName: 设备名称 # @type DeviceName: String # @param Topic: 消息发往的主题 # @type Topic: String # @param Payload: 云端下发到设备的控制报文 # @type Payload: String # @param Qos: 消息服务质量等级,取值为0或1 # @type Qos: Integer # @param PayloadEncoding: Payload的内容编码格式,取值为base64或空。base64表示云端将接收到的base64编码后的报文再转换成二进制报文下发至设备,为空表示不作转换,透传下发至设备 # @type PayloadEncoding: String attr_accessor :ProductId, :DeviceName, :Topic, :Payload, :Qos, :PayloadEncoding def initialize(productid=nil, devicename=nil, topic=nil, payload=nil, qos=nil, payloadencoding=nil) @ProductId = productid @DeviceName = devicename @Topic = topic @Payload = payload @Qos = qos @PayloadEncoding = payloadencoding end def deserialize(params) @ProductId = params['ProductId'] @DeviceName = params['DeviceName'] @Topic = params['Topic'] @Payload = params['Payload'] @Qos = params['Qos'] @PayloadEncoding = params['PayloadEncoding'] end end # PublishMessage返回参数结构体 class PublishMessageResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # ReportAliveDevice请求参数结构体 class ReportAliveDeviceRequest < TencentCloud::Common::AbstractModel # @param ProductId: 产品ID # @type ProductId: String # @param DeviceName: 设备名称 # @type DeviceName: String attr_accessor :ProductId, :DeviceName def initialize(productid=nil, devicename=nil) @ProductId = productid @DeviceName = devicename end def deserialize(params) @ProductId = params['ProductId'] @DeviceName = params['DeviceName'] end end # ReportAliveDevice返回参数结构体 class ReportAliveDeviceResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # ResetCloudStorage请求参数结构体 class ResetCloudStorageRequest < TencentCloud::Common::AbstractModel # @param ProductId: 产品ID # @type ProductId: String # @param DeviceName: 设备名称 # @type DeviceName: String # @param ChannelId: 通道ID 非NVR设备则不填 NVR设备则必填 默认为无 # @type ChannelId: Integer # @param UserId: 云存用户Id,为空则为默认云存空间。 # @type UserId: String attr_accessor :ProductId, :DeviceName, :ChannelId, :UserId def initialize(productid=nil, devicename=nil, channelid=nil, userid=nil) @ProductId = productid @DeviceName = devicename @ChannelId = channelid @UserId = userid end def deserialize(params) @ProductId = params['ProductId'] @DeviceName = params['DeviceName'] @ChannelId = params['ChannelId'] @UserId = params['UserId'] end end # ResetCloudStorage返回参数结构体 class ResetCloudStorageResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # RetryDeviceFirmwareTask请求参数结构体 class RetryDeviceFirmwareTaskRequest < TencentCloud::Common::AbstractModel # @param ProductID: 产品ID # @type ProductID: String # @param DeviceName: 设备名称 # @type DeviceName: String # @param FirmwareVersion: 固件版本号 # @type FirmwareVersion: String # @param TaskId: 固件升级任务ID # @type TaskId: Integer attr_accessor :ProductID, :DeviceName, :FirmwareVersion, :TaskId def initialize(productid=nil, devicename=nil, firmwareversion=nil, taskid=nil) @ProductID = productid @DeviceName = devicename @FirmwareVersion = firmwareversion @TaskId = taskid end def deserialize(params) @ProductID = params['ProductID'] @DeviceName = params['DeviceName'] @FirmwareVersion = params['FirmwareVersion'] @TaskId = params['TaskId'] end end # RetryDeviceFirmwareTask返回参数结构体 class RetryDeviceFirmwareTaskResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # SDK日志项 class SDKLogItem < TencentCloud::Common::AbstractModel # @param ProductID: 产品ID # @type ProductID: String # @param DeviceName: 设备名称 # @type DeviceName: String # @param Level: 日志等级 # @type Level: String # @param DateTime: 日志时间 # @type DateTime: String # @param Content: 日志内容 # @type Content: String attr_accessor :ProductID, :DeviceName, :Level, :DateTime, :Content def initialize(productid=nil, devicename=nil, level=nil, datetime=nil, content=nil) @ProductID = productid @DeviceName = devicename @Level = level @DateTime = datetime @Content = content end def deserialize(params) @ProductID = params['ProductID'] @DeviceName = params['DeviceName'] @Level = params['Level'] @DateTime = params['DateTime'] @Content = params['Content'] end end # 搜索关键词 class SearchKeyword < TencentCloud::Common::AbstractModel # @param Key: 搜索条件的Key # @type Key: String # @param Value: 搜索条件的值 # @type Value: String attr_accessor :Key, :Value def initialize(key=nil, value=nil) @Key = key @Value = value end def deserialize(params) @Key = params['Key'] @Value = params['Value'] end end # SetForwardAuth请求参数结构体 class SetForwardAuthRequest < TencentCloud::Common::AbstractModel # @param Skey: 控制台Skey # @type Skey: String # @param QueueType: 消息队列类型 0.CMQ 1.CKafka # @type QueueType: Integer attr_accessor :Skey, :QueueType def initialize(skey=nil, queuetype=nil) @Skey = skey @QueueType = queuetype end def deserialize(params) @Skey = params['Skey'] @QueueType = params['QueueType'] end end # SetForwardAuth返回参数结构体 class SetForwardAuthResponse < TencentCloud::Common::AbstractModel # @param Endpoint: 腾讯云账号 # @type Endpoint: String # @param Result: 结果 # @type Result: Integer # @param RoleName: 角色名 # @type RoleName: String # @param RoleID: 角色ID # @type RoleID: Integer # @param QueueType: 消息队列类型 0.CMQ 1.CKafka # @type QueueType: Integer # @param ErrMsg: 错误消息 # @type ErrMsg: String # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Endpoint, :Result, :RoleName, :RoleID, :QueueType, :ErrMsg, :RequestId def initialize(endpoint=nil, result=nil, rolename=nil, roleid=nil, queuetype=nil, errmsg=nil, requestid=nil) @Endpoint = endpoint @Result = result @RoleName = rolename @RoleID = roleid @QueueType = queuetype @ErrMsg = errmsg @RequestId = requestid end def deserialize(params) @Endpoint = params['Endpoint'] @Result = params['Result'] @RoleName = params['RoleName'] @RoleID = params['RoleID'] @QueueType = params['QueueType'] @ErrMsg = params['ErrMsg'] @RequestId = params['RequestId'] end end # 状态统计信息 class StatusStatistic < TencentCloud::Common::AbstractModel # @param Status: 任务状态 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Status: Integer # @param Total: 统计总数 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Total: Integer attr_accessor :Status, :Total def initialize(status=nil, total=nil) @Status = status @Total = total end def deserialize(params) @Status = params['Status'] @Total = params['Total'] end end # TransferCloudStorage请求参数结构体 class TransferCloudStorageRequest < TencentCloud::Common::AbstractModel # @param ProductId: 产品ID # @type ProductId: String # @param DeviceName: 已开通云存的设备名称 # @type DeviceName: String # @param ToDeviceName: 未开通云存的设备名称 # @type ToDeviceName: String # @param ToProductId: 未开通云存的设备产品ID # @type ToProductId: String attr_accessor :ProductId, :DeviceName, :ToDeviceName, :ToProductId def initialize(productid=nil, devicename=nil, todevicename=nil, toproductid=nil) @ProductId = productid @DeviceName = devicename @ToDeviceName = todevicename @ToProductId = toproductid end def deserialize(params) @ProductId = params['ProductId'] @DeviceName = params['DeviceName'] @ToDeviceName = params['ToDeviceName'] @ToProductId = params['ToProductId'] end end # TransferCloudStorage返回参数结构体 class TransferCloudStorageResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # UpdateAIModelChannel请求参数结构体 class UpdateAIModelChannelRequest < TencentCloud::Common::AbstractModel # @param ModelId: 模型ID # @type ModelId: String # @param ProductId: 产品ID # @type ProductId: String # @param Type: 推送类型。ckafka:消息队列;forward:http/https推送 # @type Type: String # @param ForwardAddress: 第三方推送地址 # @type ForwardAddress: String # @param ForwardKey: 第三方推送密钥,不填写则腾讯云自动生成。 # @type ForwardKey: String # @param CKafkaRegion: ckafka地域 # @type CKafkaRegion: String # @param CKafkaInstance: ckafka实例 # @type CKafkaInstance: String # @param CKafkaTopic: ckafka订阅主题 # @type CKafkaTopic: String attr_accessor :ModelId, :ProductId, :Type, :ForwardAddress, :ForwardKey, :CKafkaRegion, :CKafkaInstance, :CKafkaTopic def initialize(modelid=nil, productid=nil, type=nil, forwardaddress=nil, forwardkey=nil, ckafkaregion=nil, ckafkainstance=nil, ckafkatopic=nil) @ModelId = modelid @ProductId = productid @Type = type @ForwardAddress = forwardaddress @ForwardKey = forwardkey @CKafkaRegion = ckafkaregion @CKafkaInstance = ckafkainstance @CKafkaTopic = ckafkatopic end def deserialize(params) @ModelId = params['ModelId'] @ProductId = params['ProductId'] @Type = params['Type'] @ForwardAddress = params['ForwardAddress'] @ForwardKey = params['ForwardKey'] @CKafkaRegion = params['CKafkaRegion'] @CKafkaInstance = params['CKafkaInstance'] @CKafkaTopic = params['CKafkaTopic'] end end # UpdateAIModelChannel返回参数结构体 class UpdateAIModelChannelResponse < TencentCloud::Common::AbstractModel # @param ForwardKey: 第三方推送密钥,如果选择自动生成则会返回此字段 # 注意:此字段可能返回 null,表示取不到有效值。 # @type ForwardKey: String # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :ForwardKey, :RequestId def initialize(forwardkey=nil, requestid=nil) @ForwardKey = forwardkey @RequestId = requestid end def deserialize(params) @ForwardKey = params['ForwardKey'] @RequestId = params['RequestId'] end end # UploadFirmware请求参数结构体 class UploadFirmwareRequest < TencentCloud::Common::AbstractModel # @param ProductID: 产品ID # @type ProductID: String # @param FirmwareVersion: 固件版本号 # @type FirmwareVersion: String # @param Md5sum: 固件的MD5值 # @type Md5sum: String # @param FileSize: 固件的大小 # @type FileSize: Integer # @param FirmwareName: 固件名称 # @type FirmwareName: String # @param FirmwareDescription: 固件描述 # @type FirmwareDescription: String # @param FwType: 固件升级模块;可选值 mcu|moudule # @type FwType: String attr_accessor :ProductID, :FirmwareVersion, :Md5sum, :FileSize, :FirmwareName, :FirmwareDescription, :FwType def initialize(productid=nil, firmwareversion=nil, md5sum=nil, filesize=nil, firmwarename=nil, firmwaredescription=nil, fwtype=nil) @ProductID = productid @FirmwareVersion = firmwareversion @Md5sum = md5sum @FileSize = filesize @FirmwareName = firmwarename @FirmwareDescription = firmwaredescription @FwType = fwtype end def deserialize(params) @ProductID = params['ProductID'] @FirmwareVersion = params['FirmwareVersion'] @Md5sum = params['Md5sum'] @FileSize = params['FileSize'] @FirmwareName = params['FirmwareName'] @FirmwareDescription = params['FirmwareDescription'] @FwType = params['FwType'] end end # UploadFirmware返回参数结构体 class UploadFirmwareResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # 批次元数据 class VideoBatch < TencentCloud::Common::AbstractModel # @param Id: 批次ID # @type Id: Integer # @param UserId: 用户ID # @type UserId: String # @param ProductId: 产品ID # @type ProductId: String # @param Status: 状态:1:待创建设备 2:创建中 3:已完成 # @type Status: Integer # @param DevPre: 设备前缀 # @type DevPre: String # @param DevNum: 设备数量 # @type DevNum: Integer # @param DevNumCreated: 已创建设备数量 # @type DevNumCreated: Integer # @param BatchURL: 批次下载地址 # @type BatchURL: String # @param CreateTime: 创建时间。unix时间戳 # @type CreateTime: Integer # @param UpdateTime: 修改时间。unix时间戳 # @type UpdateTime: Integer attr_accessor :Id, :UserId, :ProductId, :Status, :DevPre, :DevNum, :DevNumCreated, :BatchURL, :CreateTime, :UpdateTime def initialize(id=nil, userid=nil, productid=nil, status=nil, devpre=nil, devnum=nil, devnumcreated=nil, batchurl=nil, createtime=nil, updatetime=nil) @Id = id @UserId = userid @ProductId = productid @Status = status @DevPre = devpre @DevNum = devnum @DevNumCreated = devnumcreated @BatchURL = batchurl @CreateTime = createtime @UpdateTime = updatetime end def deserialize(params) @Id = params['Id'] @UserId = params['UserId'] @ProductId = params['ProductId'] @Status = params['Status'] @DevPre = params['DevPre'] @DevNum = params['DevNum'] @DevNumCreated = params['DevNumCreated'] @BatchURL = params['BatchURL'] @CreateTime = params['CreateTime'] @UpdateTime = params['UpdateTime'] end end # video产品元数据 class VideoProduct < TencentCloud::Common::AbstractModel # @param ProductId: 产品ID # @type ProductId: String # @param ProductName: 产品名称 # @type ProductName: String # @param DeviceType: 产品设备类型(普通设备) 1.普通设备 # @type DeviceType: Integer # @param EncryptionType: 认证方式:2:PSK # @type EncryptionType: Integer # @param Features: 设备功能码 # @type Features: Array # @param ChipOs: 操作系统 # @type ChipOs: String # @param ChipManufactureId: 芯片厂商id # @type ChipManufactureId: String # @param ChipId: 芯片id # @type ChipId: String # @param ProductDescription: 产品描述信息 # @type ProductDescription: String # @param CreateTime: 创建时间unix时间戳 # @type CreateTime: Integer # @param UpdateTime: 修改时间unix时间戳 # @type UpdateTime: Integer # @param NetType: 连接类型,wifi表示WIFI连接,cellular表示4G连接 # 注意:此字段可能返回 null,表示取不到有效值。 # @type NetType: String # @param CategoryId: 产品品类,113:摄像头,567:儿童手表,595:可视对讲门锁 # 注意:此字段可能返回 null,表示取不到有效值。 # @type CategoryId: Integer # @param ProductVaildYears: 产品有效年限 # 注意:此字段可能返回 null,表示取不到有效值。 # @type ProductVaildYears: Integer attr_accessor :ProductId, :ProductName, :DeviceType, :EncryptionType, :Features, :ChipOs, :ChipManufactureId, :ChipId, :ProductDescription, :CreateTime, :UpdateTime, :NetType, :CategoryId, :ProductVaildYears def initialize(productid=nil, productname=nil, devicetype=nil, encryptiontype=nil, features=nil, chipos=nil, chipmanufactureid=nil, chipid=nil, productdescription=nil, createtime=nil, updatetime=nil, nettype=nil, categoryid=nil, productvaildyears=nil) @ProductId = productid @ProductName = productname @DeviceType = devicetype @EncryptionType = encryptiontype @Features = features @ChipOs = chipos @ChipManufactureId = chipmanufactureid @ChipId = chipid @ProductDescription = productdescription @CreateTime = createtime @UpdateTime = updatetime @NetType = nettype @CategoryId = categoryid @ProductVaildYears = productvaildyears end def deserialize(params) @ProductId = params['ProductId'] @ProductName = params['ProductName'] @DeviceType = params['DeviceType'] @EncryptionType = params['EncryptionType'] @Features = params['Features'] @ChipOs = params['ChipOs'] @ChipManufactureId = params['ChipManufactureId'] @ChipId = params['ChipId'] @ProductDescription = params['ProductDescription'] @CreateTime = params['CreateTime'] @UpdateTime = params['UpdateTime'] @NetType = params['NetType'] @CategoryId = params['CategoryId'] @ProductVaildYears = params['ProductVaildYears'] end end # WakeUpDevice请求参数结构体 class WakeUpDeviceRequest < TencentCloud::Common::AbstractModel # @param ProductId: 产品ID # @type ProductId: String # @param DeviceName: 设备名称 # @type DeviceName: String attr_accessor :ProductId, :DeviceName def initialize(productid=nil, devicename=nil) @ProductId = productid @DeviceName = devicename end def deserialize(params) @ProductId = params['ProductId'] @DeviceName = params['DeviceName'] end end # WakeUpDevice返回参数结构体 class WakeUpDeviceResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end end end end