/* ==================================================================== * Copyright (c) 1998-2011 The OpenSSL Project. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * 3. All advertising materials mentioning features or use of this * software must display the following acknowledgment: * "This product includes software developed by the OpenSSL Project * for use in the OpenSSL Toolkit. (http://www.openssl.org/)" * * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to * endorse or promote products derived from this software without * prior written permission. For written permission, please contact * openssl-core@openssl.org. * * 5. Products derived from this software may not be called "OpenSSL" * nor may "OpenSSL" appear in their names without prior written * permission of the OpenSSL Project. * * 6. Redistributions of any form whatsoever must retain the following * acknowledgment: * "This product includes software developed by the OpenSSL Project * for use in the OpenSSL Toolkit (http://www.openssl.org/)" * * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED * OF THE POSSIBILITY OF SUCH DAMAGE. * ==================================================================== * * This product includes cryptographic software written by Eric Young * (eay@cryptsoft.com). This product includes software written by Tim * Hudson (tjh@cryptsoft.com). */ #ifndef OPENSSL_HEADER_ARM_ARCH_H #define OPENSSL_HEADER_ARM_ARCH_H #if !defined(__ARM_ARCH__) # if defined(__CC_ARM) # define __ARM_ARCH__ __TARGET_ARCH_ARM # if defined(__BIG_ENDIAN) # define __ARMEB__ # else # define __ARMEL__ # endif # elif defined(__GNUC__) # if defined(__aarch64__) # define __ARM_ARCH__ 8 # if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__ # define __ARMEB__ # else # define __ARMEL__ # endif // Why doesn't gcc define __ARM_ARCH__? Instead it defines // bunch of below macros. See all_architectires[] table in // gcc/config/arm/arm.c. On a side note it defines // __ARMEL__/__ARMEB__ for little-/big-endian. # elif defined(__ARM_ARCH) # define __ARM_ARCH__ __ARM_ARCH # elif defined(__ARM_ARCH_8A__) # define __ARM_ARCH__ 8 # elif defined(__ARM_ARCH_7__) || defined(__ARM_ARCH_7A__) || \ defined(__ARM_ARCH_7R__)|| defined(__ARM_ARCH_7M__) || \ defined(__ARM_ARCH_7EM__) # define __ARM_ARCH__ 7 # elif defined(__ARM_ARCH_6__) || defined(__ARM_ARCH_6J__) || \ defined(__ARM_ARCH_6K__)|| defined(__ARM_ARCH_6M__) || \ defined(__ARM_ARCH_6Z__)|| defined(__ARM_ARCH_6ZK__) || \ defined(__ARM_ARCH_6T2__) # define __ARM_ARCH__ 6 # elif defined(__ARM_ARCH_5__) || defined(__ARM_ARCH_5T__) || \ defined(__ARM_ARCH_5E__)|| defined(__ARM_ARCH_5TE__) || \ defined(__ARM_ARCH_5TEJ__) # define __ARM_ARCH__ 5 # elif defined(__ARM_ARCH_4__) || defined(__ARM_ARCH_4T__) # define __ARM_ARCH__ 4 # else # error "unsupported ARM architecture" # endif # endif #endif // Even when building for 32-bit ARM, support for aarch64 crypto instructions // will be included. #define __ARM_MAX_ARCH__ 8 // ARMV7_NEON is true when a NEON unit is present in the current CPU. #define ARMV7_NEON (1 << 0) // ARMV8_AES indicates support for hardware AES instructions. #define ARMV8_AES (1 << 2) // ARMV8_SHA1 indicates support for hardware SHA-1 instructions. #define ARMV8_SHA1 (1 << 3) // ARMV8_SHA256 indicates support for hardware SHA-256 instructions. #define ARMV8_SHA256 (1 << 4) // ARMV8_PMULL indicates support for carryless multiplication. #define ARMV8_PMULL (1 << 5) #if defined(__ASSEMBLER__) // Support macros for // - Armv8.3-A Pointer Authentication and // - Armv8.5-A Branch Target Identification // features which require emitting a .note.gnu.property section with the // appropriate architecture-dependent feature bits set. // // |AARCH64_SIGN_LINK_REGISTER| and |AARCH64_VALIDATE_LINK_REGISTER| expand to // PACIxSP and AUTIxSP, respectively. |AARCH64_SIGN_LINK_REGISTER| should be // used immediately before saving the LR register (x30) to the stack. // |AARCH64_VALIDATE_LINK_REGISTER| should be used immediately after restoring // it. Note |AARCH64_SIGN_LINK_REGISTER|'s modifications to LR must be undone // with |AARCH64_VALIDATE_LINK_REGISTER| before RET. The SP register must also // have the same value at the two points. For example: // // .global f // f: // AARCH64_SIGN_LINK_REGISTER // stp x29, x30, [sp, #-96]! // mov x29, sp // ... // ldp x29, x30, [sp], #96 // AARCH64_VALIDATE_LINK_REGISTER // ret // // |AARCH64_VALID_CALL_TARGET| expands to BTI 'c'. Either it, or // |AARCH64_SIGN_LINK_REGISTER|, must be used at every point that may be an // indirect call target. In particular, all symbols exported from a file must // begin with one of these macros. For example, a leaf function that does not // save LR can instead use |AARCH64_VALID_CALL_TARGET|: // // .globl return_zero // return_zero: // AARCH64_VALID_CALL_TARGET // mov x0, #0 // ret // // A non-leaf function which does not immediately save LR may need both macros // because |AARCH64_SIGN_LINK_REGISTER| appears late. For example, the function // may jump to an alternate implementation before setting up the stack: // // .globl with_early_jump // with_early_jump: // AARCH64_VALID_CALL_TARGET // cmp x0, #128 // b.lt .Lwith_early_jump_128 // AARCH64_SIGN_LINK_REGISTER // stp x29, x30, [sp, #-96]! // mov x29, sp // ... // ldp x29, x30, [sp], #96 // AARCH64_VALIDATE_LINK_REGISTER // ret // // .Lwith_early_jump_128: // ... // ret // // These annotations are only required with indirect calls. Private symbols that // are only the target of direct calls do not require annotations. Also note // that |AARCH64_VALID_CALL_TARGET| is only valid for indirect calls (BLR), not // indirect jumps (BR). Indirect jumps in assembly are currently not supported // and would require a macro for BTI 'j'. // // Although not necessary, it is safe to use these macros in 32-bit ARM // assembly. This may be used to simplify dual 32-bit and 64-bit files. // // References: // - "ELF for the ArmĀ® 64-bit Architecture" // https://github.com/ARM-software/abi-aa/blob/master/aaelf64/aaelf64.rst // - "Providing protection for complex software" // https://developer.arm.com/architectures/learn-the-architecture/providing-protection-for-complex-software #if defined(__ARM_FEATURE_BTI_DEFAULT) && __ARM_FEATURE_BTI_DEFAULT == 1 #define GNU_PROPERTY_AARCH64_BTI (1 << 0) // Has Branch Target Identification #define AARCH64_VALID_CALL_TARGET hint #34 // BTI 'c' #else #define GNU_PROPERTY_AARCH64_BTI 0 // No Branch Target Identification #define AARCH64_VALID_CALL_TARGET #endif #if defined(__ARM_FEATURE_PAC_DEFAULT) && \ (__ARM_FEATURE_PAC_DEFAULT & 1) == 1 // Signed with A-key #define GNU_PROPERTY_AARCH64_POINTER_AUTH \ (1 << 1) // Has Pointer Authentication #define AARCH64_SIGN_LINK_REGISTER hint #25 // PACIASP #define AARCH64_VALIDATE_LINK_REGISTER hint #29 // AUTIASP #elif defined(__ARM_FEATURE_PAC_DEFAULT) && \ (__ARM_FEATURE_PAC_DEFAULT & 2) == 2 // Signed with B-key #define GNU_PROPERTY_AARCH64_POINTER_AUTH \ (1 << 1) // Has Pointer Authentication #define AARCH64_SIGN_LINK_REGISTER hint #27 // PACIBSP #define AARCH64_VALIDATE_LINK_REGISTER hint #31 // AUTIBSP #else #define GNU_PROPERTY_AARCH64_POINTER_AUTH 0 // No Pointer Authentication #if GNU_PROPERTY_AARCH64_BTI != 0 #define AARCH64_SIGN_LINK_REGISTER AARCH64_VALID_CALL_TARGET #else #define AARCH64_SIGN_LINK_REGISTER #endif #define AARCH64_VALIDATE_LINK_REGISTER #endif #if GNU_PROPERTY_AARCH64_POINTER_AUTH != 0 || GNU_PROPERTY_AARCH64_BTI != 0 .pushsection .note.gnu.property, "a"; .balign 8; .long 4; .long 0x10; .long 0x5; .asciz "GNU"; .long 0xc0000000; /* GNU_PROPERTY_AARCH64_FEATURE_1_AND */ .long 4; .long (GNU_PROPERTY_AARCH64_POINTER_AUTH | GNU_PROPERTY_AARCH64_BTI); .long 0; .popsection; #endif #endif /* defined __ASSEMBLER__ */ #endif // OPENSSL_HEADER_ARM_ARCH_H