module OrigenTesters module IGXLBasedTester class J750 require 'origen_testers/igxl_based_tester/base/test_instance' class TestInstance < Base::TestInstance # Attributes for each test instance line, first few are named directly TEST_INSTANCE_ATTRS = %w( test_name proc_type proc_name proc_called_as dc_category dc_selector ac_category ac_selector time_sets edge_sets pin_levels overlay ) # Attributes for additional test instance arguments beyond those described above TEST_INSTANCE_EXTRA_ARGS = 80 TEST_INSTANCE_ALIASES = { name: :test_name, time_set: :time_sets, timeset: :time_sets, timesets: :time_sets, other: { }, empty: { start_func: :arg0, start_of_body_f: :arg0, pre_pat_func: :arg1, pre_pat_f: :arg1, pre_test_func: :arg2, pre_test_f: :arg2, post_test_func: :arg3, post_test_f: :arg3, post_pat_func: :arg4, post_pat_f: :arg4, end_func: :arg5, end_of_body_f: :arg5, start_func_args: :arg6, start_of_body_f_args: :arg6, pre_pat_func_args: :arg7, pre_pat_f_args: :arg7, pre_test_func_args: :arg8, pre_test_f_args: :arg8, post_test_func_args: :arg9, post_test_f_args: :arg9, post_pat_func_args: :arg10, post_pat_f_args: :arg10, end_func_args: :arg11, end_of_body_f_args: :arg11, utility_pins_1: :arg12, utility_pins_0: :arg13, init_lo: :arg14, start_lo: :arg14, init_hi: :arg15, start_hi: :arg15, init_hiz: :arg16, start_hiz: :arg16, float_pins: :arg17 }, # Functional test instances functional: { pattern: :arg0, patterns: :arg0, start_func: :arg1, start_of_body_f: :arg1, pre_pat_func: :arg2, pre_pat_f: :arg2, pre_test_func: :arg3, pre_test_f: :arg3, post_test_func: :arg4, post_test_f: :arg4, post_pat_func: :arg5, post_pat_f: :arg5, end_func: :arg6, end_of_body_f: :arg6, set_pass_fail: :arg7, init_lo: :arg8, start_lo: :arg8, init_hi: :arg9, start_hi: :arg9, init_hiz: :arg10, start_hiz: :arg10, float_pins: :arg11, start_func_args: :arg13, start_of_body_f_args: :arg13, pre_pat_func_args: :arg14, pre_pat_f_args: :arg14, pre_test_func_args: :arg15, pre_test_f_args: :arg15, post_test_func_args: :arg16, post_test_f_args: :arg16, post_pat_func_args: :arg17, post_pat_f_args: :arg17, end_func_args: :arg18, end_of_body_f_args: :arg18, wait_flags: :arg21, wait_time: :arg22, pattern_timeout: :arg22, pat_flag_func: :arg23, pat_flag_f: :arg23, PatFlagF: :arg23, pat_flag_func_args: :arg24, pat_flag_f_args: :arg24, relay_mode: :arg25, threading: :arg26, match_all_sites: :arg27, capture_mode: :arg30, capture_what: :arg31, capture_memory: :arg32, capture_size: :arg33, datalog_mode: :arg34, data_type: :arg35 }, board_pmu: { hsp_start: :arg0, start_func: :arg1, start_of_body_f: :arg1, pre_pat_func: :arg2, pre_pat_f: :arg2, pre_test_func: :arg3, pre_test_f: :arg3, post_test_func: :arg4, post_test_f: :arg4, post_pat_func: :arg5, post_pat_f: :arg5, end_func: :arg6, end_of_body_f: :arg6, precond_pat: :arg7, hold_state_pat: :arg8, holdstate_pat: :arg8, pattern: :arg8, pcp_stop: :arg9, wait_flags: :arg10, start_lo: :arg11, init_lo: :arg11, start_hi: :arg12, init_hi: :arg12, start_hiz: :arg13, init_hiz: :arg13, float_pins: :arg14, pinlist: :arg15, pin: :arg15, pin_list: :arg15, measure_mode: :arg16, irange: :arg17, clamp: :arg18, vrange: :arg19, sampling_time: :arg20, samples: :arg21, settling_time: :arg22, hi_lo_lim_valid: :arg23, hi_lo_limit_valid: :arg23, hi_limit: :arg24, lo_limit: :arg25, force_cond_1: :arg26, force_cond: :arg26, force_condition: :arg26, force_cond_2: :arg27, gang_pins_tested: :arg28, relay_mode: :arg29, wait_time_out: :arg30, start_func_args: :arg31, start_of_body_f_args: :arg31, pre_pat_func_args: :arg32, pre_pat_f_args: :arg32, pre_test_func_args: :arg33, pre_test_f_args: :arg33, post_test_func_args: :arg34, post_test_f_args: :arg34, post_pat_func_args: :arg35, post_pat_f_args: :arg35, end_func_args: :arg36, end_of_body_f_args: :arg36, pcp_start: :arg37, pcp_check_pg: :arg38, hsp_stop: :arg39, hsp_check_pg: :arg40, resume_pat: :arg41, utility_pins_1: :arg42, utility_pins_0: :arg43, pre_charge_enable: :arg44, pre_charge: :arg45, threading: :arg46 }, pin_pmu: { hsp_start: :arg0, start_func: :arg1, start_of_body_f: :arg1, pre_pat_func: :arg2, pre_pat_f: :arg2, pre_test_func: :arg3, pre_test_f: :arg3, post_test_func: :arg4, post_test_f: :arg4, post_pat_func: :arg5, post_pat_f: :arg5, end_func: :arg6, end_of_body_f: :arg6, precond_pat: :arg7, hold_state_pat: :arg8, holdstate_pat: :arg8, pattern: :arg8, pcp_stop: :arg9, wait_flags: :arg10, start_lo: :arg11, init_lo: :arg11, start_hi: :arg12, init_hi: :arg12, start_hiz: :arg13, init_hiz: :arg13, float_pins: :arg14, pinlist: :arg15, pin: :arg15, pin_list: :arg15, measure_mode: :arg16, irange: :arg17, settling_time: :arg18, hi_lo_lim_valid: :arg19, hi_lo_limit_valid: :arg19, hi_limit: :arg20, lo_limit: :arg21, force_cond_1: :arg22, force_cond: :arg22, force_condition: :arg22, force_cond_2: :arg23, fload: :arg24, relay_mode: :arg25, wait_time_out: :arg26, start_func_args: :arg27, start_of_body_f_args: :arg27, pre_pat_func_args: :arg28, pre_pat_f_args: :arg28, pre_test_func_args: :arg29, pre_test_f_args: :arg29, post_test_func_args: :arg30, post_test_f_args: :arg30, post_pat_func_args: :arg31, post_pat_f_args: :arg31, end_func_args: :arg32, end_of_body_f_args: :arg32, pcp_start: :arg33, pcp_check_pg: :arg34, hsp_stop: :arg35, hsp_check_pg: :arg36, sampling_time: :arg37, samples: :arg38, resume_pat: :arg39, vcl: :arg40, vch: :arg41, utility_pins_1: :arg42, utility_pins_0: :arg43, pre_charge_enable: :arg44, pre_charge: :arg45, threading: :arg46 }, apmu_powersupply: { precond_pat: :arg0, pre_cond_pat: :arg0, start_func: :arg1, start_of_body_f: :arg1, pre_pat_func: :arg2, pre_pat_f: :arg2, pre_test_func: :arg3, pre_test_f: :arg3, post_test_func: :arg4, post_test_f: :arg4, post_pat_func: :arg5, post_pat_f: :arg5, end_func: :arg6, end_of_body_f: :arg6, hold_state_pat: :arg7, holdstate_pat: :arg7, wait_flags: :arg8, wait_time_out: :arg9, start_lo: :arg10, start_init_lo: :arg10, init_lo: :arg10, start_hi: :arg11, start_init_hi: :arg11, init_hi: :arg11, start_hiz: :arg12, start_init_hiz: :arg12, init_hiz: :arg12, float_pins: :arg13, irange: :arg14, sampling_time: :arg15, samples: :arg16, settling_time: :arg17, hi_lo_lim_valid: :arg18, hi_lo_limit_valid: :arg18, hi_limit: :arg19, lo_limit: :arg20, force_cond_1: :arg21, force_cond: :arg21, force_condition: :arg21, force_condition_1: :arg21, force_cond_2: :arg22, force_condition_2: :arg22, power_pins: :arg23, pins: :arg23, pin: :arg23, force_source: :arg24, pcp_start: :arg25, pcp_stop: :arg26, start_func_args: :arg27, start_of_body_f_args: :arg27, pre_pat_func_args: :arg28, pre_pat_f_args: :arg28, pre_test_func_args: :arg29, pre_test_f_args: :arg29, post_test_func_args: :arg30, post_test_f_args: :arg30, post_pat_func_args: :arg31, post_pat_f_args: :arg31, end_func_args: :arg32, end_of_body_f_args: :arg32, hsp_start: :arg33, hsp_stop: :arg34, pcp_check_pg: :arg35, clamp: :arg36, hsp_check_pg: :arg37, resume_pat: :arg38, relay_mode: :arg39, utility_pins_1: :arg40, utility_pins_0: :arg41, test_control: :arg42, serialize_meas: :arg43, serialize_meas_func: :arg44, serialize_meas_f: :arg44, serialize_meas_func_args: :arg45, serialize_meas_f_args: :arg45 }, mto_memory: { patterns: :arg0, pattern: :arg0, start_func: :arg1, start_of_body_f: :arg1, pre_pat_func: :arg2, pre_pat_f: :arg2, pre_test_func: :arg3, pre_test_f: :arg3, post_test_func: :arg4, post_test_f: :arg4, post_pat_func: :arg5, post_pat_f: :arg5, end_of_body_func: :arg6, end_of_body_f: :arg6, set_pass_fail: :arg7, init_lo: :arg8, start_lo: :arg8, init_hi: :arg9, start_hi: :arg9, init_hiz: :arg10, start_hiz: :arg10, float_pins: :arg11, start_of_body_func_args: :arg12, start_of_body_f_args: :arg12, pre_pat_func_args: :arg13, pre_pat_f_args: :arg13, pre_test_func_args: :arg14, pre_test_f_args: :arg14, post_test_func_args: :arg15, post_test_f_args: :arg15, post_pat_f_args: :arg16, end_of_body_func_args: :arg17, end_of_body_f_args: :arg17, utility_pins_1: :arg18, utility_pins_0: :arg19, wait_flags: :arg20, wait_time_out: :arg21, PatFlagF: :arg22, pat_flag_f: :arg22, pat_flag_func_args: :arg23, pat_flag_f_args: :arg23, relay_mode: :arg24, x_enable_mask: :arg29, x_shift_direction: :arg30, x_shift_input: :arg31, y_enable_mask: :arg36, y_shift_direction: :arg37, y_shift_input: :arg38, dga: :arg39, dgb: :arg40, dgc: :arg41, dgd: :arg42, dg_enable_mask: :arg43, dg_shift_direction: :arg44, dg_shift_input: :arg45, x_coincidence_enable_mask: :arg46, y_coincidence_enable_mask: :arg47, two_bit_dg_setup: :arg48, x_scramble_algorithm: :arg49, y_scramble_algorithm: :arg50, topo_inversion_algorithm: :arg51, utility_counter_a: :arg52, utility_counter_b: :arg53, utility_counter_c: :arg54, dut_data_source: :arg55, scramble_addr: :arg56, speed_mode: :arg57, resource_map: :arg58, receive_data: :arg59, data_to_capture: :arg60, capture_marker: :arg61, enable_wrapping: :arg62, capture_scrambled_address: :arg63, mapmem_0_input_set: :arg64, mapmem_1_input_set: :arg65, threading: :arg69, match_all_sites: :arg70 } } TEST_INSTANCE_DEFAULTS = { empty: { proc_type: 'IG-XL Template', proc_name: 'Empty_T', proc_called_as: 'Excel Macro' }, other: { proc_type: 'Other', proc_called_as: 'Excel Macro' }, functional: { proc_type: 'IG-XL Template', proc_name: 'Functional_T', proc_called_as: 'VB DLL', set_pass_fail: 1, wait_flags: 'XXXX', wait_time: 30, relay_mode: 1, threading: 0, match_all_sites: 0, capture_mode: 0, capture_what: 0, capture_memory: 0, capture_size: 256, datalog_mode: 0, data_type: 0 }, board_pmu: { proc_type: 'IG-XL Template', proc_name: 'BoardPmu_T', proc_called_as: 'VB DLL', wait_flags: 'XXXX', measure_mode: 1, irange: 5, vrange: 3, settling_time: 0, hi_lo_lim_valid: 3, gang_pins_tested: 0, relay_mode: 0, wait_time_out: 30, pcp_check_pg: 1, hsp_check_pg: 1, resume_pat: 0, threading: 0 }, pin_pmu: { proc_type: 'IG-XL Template', proc_name: 'PinPmu_T', proc_called_as: 'VB DLL', wait_flags: 'XXXX', measure_mode: 1, irange: 2, settling_time: 0, hi_lo_lim_valid: 3, fload: 0, relay_mode: 0, wait_time_out: 30, pcp_check_pg: 1, hsp_check_pg: 1, resume_pat: 0, threading: 0 }, apmu_powersupply: { proc_type: 'IG-XL Template', proc_name: 'ApmuPowerSupply_T', proc_called_as: 'VB DLL', wait_flags: 'XXXX', irange: 1, settling_time: 0, hi_lo_lim_valid: 3, relay_mode: 0, wait_time_out: 30, pcp_check_pg: 1, hsp_check_pg: 1, resume_pat: 0, test_control: 0 }, mto_memory: { proc_type: 'IG-XL Template', proc_name: 'MtoMemory_T', proc_called_as: 'VB DLL', set_pass_fail: 1, wait_flags: 'XXXX', wait_time: 30, relay_mode: 1, threading: 0, match_all_sites: 0, dut_data_source: 0, scramble_addr: 0, speed_mode: 0, resource_map: 'MAP_1M_2BIT', receive_data: 0, data_to_capture: 1, capture_marker: 1, enable_wrapping: 0, capture_scrambled_address: 0, mapmem_0_input_set: 'Map_By16', mapmem_1_input_set: 'Map_By16', x_scramble_algorithm: 'X_NO_SCRAMBLE', y_scramble_algorithm: 'Y_NO_SCRAMBLE', topo_inversion_algorithm: 'NO_TOPO', x_shift_direction: 0, x_shift_input: 0, y_shift_direction: 0, y_shift_input: 0, x_coincidence_enable_mask: 0, y_coincidence_enable_mask: 0, dg_shift_direction: 0, dg_shift_input: 0 } } # Generate the instance method definitions based on the above define # Set the cpu wait flags for the given test instance # instance.set_wait_flags(:a) # instance.set_wait_flags(:a, :c) def set_wait_flags(*flags) a = (flags.include?(:a) || flags.include?(:a)) ? '1' : 'X' b = (flags.include?(:b) || flags.include?(:b)) ? '1' : 'X' c = (flags.include?(:c) || flags.include?(:c)) ? '1' : 'X' d = (flags.include?(:d) || flags.include?(:d)) ? '1' : 'X' self.wait_flags = d + c + b + a self end end end end end