###### (Automatically generated documentation) # Apply Upgrade ## Description Measure that applies an upgrade (one or more child measures) to a building model based on the specified logic. Determines if the upgrade should apply to a given building model. If so, calls one or more child measures with the appropriate arguments. ## Arguments **Upgrade Name** User-specificed name that describes the upgrade. - **Name:** ``upgrade_name`` - **Type:** ``String`` - **Required:** ``true``
**Option 1** Specify the parameter|option as found in resources\options_lookup.tsv. - **Name:** ``option_1`` - **Type:** ``String`` - **Required:** ``true``
**Option 1 Apply Logic** Logic that specifies if the Option 1 upgrade will apply based on the existing building's options. Specify one or more parameter|option as found in resources\options_lookup.tsv. When multiple are included, they must be separated by '||' for OR and '&&' for AND, and using parentheses as appropriate. Prefix an option with '!' for not. - **Name:** ``option_1_apply_logic`` - **Type:** ``String`` - **Required:** ``false``
**Option 1 Cost 1 Value** Total option 1 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_1_cost_1_value`` - **Type:** ``Double`` - **Units:** ``$`` - **Required:** ``false``
**Option 1 Cost 1 Multiplier** Total option 1 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_1_cost_1_multiplier`` - **Type:** ``Choice`` - **Required:** ``false`` - **Choices:** ``, `Fixed (1)`, `Wall Area, Above-Grade, Conditioned (ft^2)`, `Wall Area, Above-Grade, Exterior (ft^2)`, `Wall Area, Below-Grade (ft^2)`, `Floor Area, Conditioned (ft^2)`, `Floor Area, Conditioned * Infiltration Reduction (ft^2 * Delta ACH50)`, `Floor Area, Lighting (ft^2)`, `Floor Area, Foundation (ft^2)`, `Floor Area, Attic (ft^2)`, `Floor Area, Attic * Insulation Increase (ft^2 * Delta R-value)`, `Roof Area (ft^2)`, `Window Area (ft^2)`, `Door Area (ft^2)`, `Duct Unconditioned Surface Area (ft^2)`, `Rim Joist Area, Above-Grade, Exterior (ft^2)`, `Slab Perimeter, Exposed, Conditioned (ft)`, `Size, Heating System Primary (kBtu/h)`, `Size, Heating System Secondary (kBtu/h)`, `Size, Cooling System Primary (kBtu/h)`, `Size, Heat Pump Backup Primary (kBtu/h)`, `Size, Water Heater (gal)`, `Flow Rate, Mechanical Ventilation (cfm)`
**Option 1 Cost 2 Value** Total option 1 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_1_cost_2_value`` - **Type:** ``Double`` - **Units:** ``$`` - **Required:** ``false``
**Option 1 Cost 2 Multiplier** Total option 1 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_1_cost_2_multiplier`` - **Type:** ``Choice`` - **Required:** ``false`` - **Choices:** ``, `Fixed (1)`, `Wall Area, Above-Grade, Conditioned (ft^2)`, `Wall Area, Above-Grade, Exterior (ft^2)`, `Wall Area, Below-Grade (ft^2)`, `Floor Area, Conditioned (ft^2)`, `Floor Area, Conditioned * Infiltration Reduction (ft^2 * Delta ACH50)`, `Floor Area, Lighting (ft^2)`, `Floor Area, Foundation (ft^2)`, `Floor Area, Attic (ft^2)`, `Floor Area, Attic * Insulation Increase (ft^2 * Delta R-value)`, `Roof Area (ft^2)`, `Window Area (ft^2)`, `Door Area (ft^2)`, `Duct Unconditioned Surface Area (ft^2)`, `Rim Joist Area, Above-Grade, Exterior (ft^2)`, `Slab Perimeter, Exposed, Conditioned (ft)`, `Size, Heating System Primary (kBtu/h)`, `Size, Heating System Secondary (kBtu/h)`, `Size, Cooling System Primary (kBtu/h)`, `Size, Heat Pump Backup Primary (kBtu/h)`, `Size, Water Heater (gal)`, `Flow Rate, Mechanical Ventilation (cfm)`
**Option 1 Lifetime** The option lifetime. - **Name:** ``option_1_lifetime`` - **Type:** ``Double`` - **Units:** ``years`` - **Required:** ``false``
**Option 2** Specify the parameter|option as found in resources\options_lookup.tsv. - **Name:** ``option_2`` - **Type:** ``String`` - **Required:** ``false``
**Option 2 Apply Logic** Logic that specifies if the Option 2 upgrade will apply based on the existing building's options. Specify one or more parameter|option as found in resources\options_lookup.tsv. When multiple are included, they must be separated by '||' for OR and '&&' for AND, and using parentheses as appropriate. Prefix an option with '!' for not. - **Name:** ``option_2_apply_logic`` - **Type:** ``String`` - **Required:** ``false``
**Option 2 Cost 1 Value** Total option 2 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_2_cost_1_value`` - **Type:** ``Double`` - **Units:** ``$`` - **Required:** ``false``
**Option 2 Cost 1 Multiplier** Total option 2 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_2_cost_1_multiplier`` - **Type:** ``Choice`` - **Required:** ``false`` - **Choices:** ``, `Fixed (1)`, `Wall Area, Above-Grade, Conditioned (ft^2)`, `Wall Area, Above-Grade, Exterior (ft^2)`, `Wall Area, Below-Grade (ft^2)`, `Floor Area, Conditioned (ft^2)`, `Floor Area, Conditioned * Infiltration Reduction (ft^2 * Delta ACH50)`, `Floor Area, Lighting (ft^2)`, `Floor Area, Foundation (ft^2)`, `Floor Area, Attic (ft^2)`, `Floor Area, Attic * Insulation Increase (ft^2 * Delta R-value)`, `Roof Area (ft^2)`, `Window Area (ft^2)`, `Door Area (ft^2)`, `Duct Unconditioned Surface Area (ft^2)`, `Rim Joist Area, Above-Grade, Exterior (ft^2)`, `Slab Perimeter, Exposed, Conditioned (ft)`, `Size, Heating System Primary (kBtu/h)`, `Size, Heating System Secondary (kBtu/h)`, `Size, Cooling System Primary (kBtu/h)`, `Size, Heat Pump Backup Primary (kBtu/h)`, `Size, Water Heater (gal)`, `Flow Rate, Mechanical Ventilation (cfm)`
**Option 2 Cost 2 Value** Total option 2 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_2_cost_2_value`` - **Type:** ``Double`` - **Units:** ``$`` - **Required:** ``false``
**Option 2 Cost 2 Multiplier** Total option 2 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_2_cost_2_multiplier`` - **Type:** ``Choice`` - **Required:** ``false`` - **Choices:** ``, `Fixed (1)`, `Wall Area, Above-Grade, Conditioned (ft^2)`, `Wall Area, Above-Grade, Exterior (ft^2)`, `Wall Area, Below-Grade (ft^2)`, `Floor Area, Conditioned (ft^2)`, `Floor Area, Conditioned * Infiltration Reduction (ft^2 * Delta ACH50)`, `Floor Area, Lighting (ft^2)`, `Floor Area, Foundation (ft^2)`, `Floor Area, Attic (ft^2)`, `Floor Area, Attic * Insulation Increase (ft^2 * Delta R-value)`, `Roof Area (ft^2)`, `Window Area (ft^2)`, `Door Area (ft^2)`, `Duct Unconditioned Surface Area (ft^2)`, `Rim Joist Area, Above-Grade, Exterior (ft^2)`, `Slab Perimeter, Exposed, Conditioned (ft)`, `Size, Heating System Primary (kBtu/h)`, `Size, Heating System Secondary (kBtu/h)`, `Size, Cooling System Primary (kBtu/h)`, `Size, Heat Pump Backup Primary (kBtu/h)`, `Size, Water Heater (gal)`, `Flow Rate, Mechanical Ventilation (cfm)`
**Option 2 Lifetime** The option lifetime. - **Name:** ``option_2_lifetime`` - **Type:** ``Double`` - **Units:** ``years`` - **Required:** ``false``
**Option 3** Specify the parameter|option as found in resources\options_lookup.tsv. - **Name:** ``option_3`` - **Type:** ``String`` - **Required:** ``false``
**Option 3 Apply Logic** Logic that specifies if the Option 3 upgrade will apply based on the existing building's options. Specify one or more parameter|option as found in resources\options_lookup.tsv. When multiple are included, they must be separated by '||' for OR and '&&' for AND, and using parentheses as appropriate. Prefix an option with '!' for not. - **Name:** ``option_3_apply_logic`` - **Type:** ``String`` - **Required:** ``false``
**Option 3 Cost 1 Value** Total option 3 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_3_cost_1_value`` - **Type:** ``Double`` - **Units:** ``$`` - **Required:** ``false``
**Option 3 Cost 1 Multiplier** Total option 3 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_3_cost_1_multiplier`` - **Type:** ``Choice`` - **Required:** ``false`` - **Choices:** ``, `Fixed (1)`, `Wall Area, Above-Grade, Conditioned (ft^2)`, `Wall Area, Above-Grade, Exterior (ft^2)`, `Wall Area, Below-Grade (ft^2)`, `Floor Area, Conditioned (ft^2)`, `Floor Area, Conditioned * Infiltration Reduction (ft^2 * Delta ACH50)`, `Floor Area, Lighting (ft^2)`, `Floor Area, Foundation (ft^2)`, `Floor Area, Attic (ft^2)`, `Floor Area, Attic * Insulation Increase (ft^2 * Delta R-value)`, `Roof Area (ft^2)`, `Window Area (ft^2)`, `Door Area (ft^2)`, `Duct Unconditioned Surface Area (ft^2)`, `Rim Joist Area, Above-Grade, Exterior (ft^2)`, `Slab Perimeter, Exposed, Conditioned (ft)`, `Size, Heating System Primary (kBtu/h)`, `Size, Heating System Secondary (kBtu/h)`, `Size, Cooling System Primary (kBtu/h)`, `Size, Heat Pump Backup Primary (kBtu/h)`, `Size, Water Heater (gal)`, `Flow Rate, Mechanical Ventilation (cfm)`
**Option 3 Cost 2 Value** Total option 3 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_3_cost_2_value`` - **Type:** ``Double`` - **Units:** ``$`` - **Required:** ``false``
**Option 3 Cost 2 Multiplier** Total option 3 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_3_cost_2_multiplier`` - **Type:** ``Choice`` - **Required:** ``false`` - **Choices:** ``, `Fixed (1)`, `Wall Area, Above-Grade, Conditioned (ft^2)`, `Wall Area, Above-Grade, Exterior (ft^2)`, `Wall Area, Below-Grade (ft^2)`, `Floor Area, Conditioned (ft^2)`, `Floor Area, Conditioned * Infiltration Reduction (ft^2 * Delta ACH50)`, `Floor Area, Lighting (ft^2)`, `Floor Area, Foundation (ft^2)`, `Floor Area, Attic (ft^2)`, `Floor Area, Attic * Insulation Increase (ft^2 * Delta R-value)`, `Roof Area (ft^2)`, `Window Area (ft^2)`, `Door Area (ft^2)`, `Duct Unconditioned Surface Area (ft^2)`, `Rim Joist Area, Above-Grade, Exterior (ft^2)`, `Slab Perimeter, Exposed, Conditioned (ft)`, `Size, Heating System Primary (kBtu/h)`, `Size, Heating System Secondary (kBtu/h)`, `Size, Cooling System Primary (kBtu/h)`, `Size, Heat Pump Backup Primary (kBtu/h)`, `Size, Water Heater (gal)`, `Flow Rate, Mechanical Ventilation (cfm)`
**Option 3 Lifetime** The option lifetime. - **Name:** ``option_3_lifetime`` - **Type:** ``Double`` - **Units:** ``years`` - **Required:** ``false``
**Option 4** Specify the parameter|option as found in resources\options_lookup.tsv. - **Name:** ``option_4`` - **Type:** ``String`` - **Required:** ``false``
**Option 4 Apply Logic** Logic that specifies if the Option 4 upgrade will apply based on the existing building's options. Specify one or more parameter|option as found in resources\options_lookup.tsv. When multiple are included, they must be separated by '||' for OR and '&&' for AND, and using parentheses as appropriate. Prefix an option with '!' for not. - **Name:** ``option_4_apply_logic`` - **Type:** ``String`` - **Required:** ``false``
**Option 4 Cost 1 Value** Total option 4 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_4_cost_1_value`` - **Type:** ``Double`` - **Units:** ``$`` - **Required:** ``false``
**Option 4 Cost 1 Multiplier** Total option 4 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_4_cost_1_multiplier`` - **Type:** ``Choice`` - **Required:** ``false`` - **Choices:** ``, `Fixed (1)`, `Wall Area, Above-Grade, Conditioned (ft^2)`, `Wall Area, Above-Grade, Exterior (ft^2)`, `Wall Area, Below-Grade (ft^2)`, `Floor Area, Conditioned (ft^2)`, `Floor Area, Conditioned * Infiltration Reduction (ft^2 * Delta ACH50)`, `Floor Area, Lighting (ft^2)`, `Floor Area, Foundation (ft^2)`, `Floor Area, Attic (ft^2)`, `Floor Area, Attic * Insulation Increase (ft^2 * Delta R-value)`, `Roof Area (ft^2)`, `Window Area (ft^2)`, `Door Area (ft^2)`, `Duct Unconditioned Surface Area (ft^2)`, `Rim Joist Area, Above-Grade, Exterior (ft^2)`, `Slab Perimeter, Exposed, Conditioned (ft)`, `Size, Heating System Primary (kBtu/h)`, `Size, Heating System Secondary (kBtu/h)`, `Size, Cooling System Primary (kBtu/h)`, `Size, Heat Pump Backup Primary (kBtu/h)`, `Size, Water Heater (gal)`, `Flow Rate, Mechanical Ventilation (cfm)`
**Option 4 Cost 2 Value** Total option 4 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_4_cost_2_value`` - **Type:** ``Double`` - **Units:** ``$`` - **Required:** ``false``
**Option 4 Cost 2 Multiplier** Total option 4 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_4_cost_2_multiplier`` - **Type:** ``Choice`` - **Required:** ``false`` - **Choices:** ``, `Fixed (1)`, `Wall Area, Above-Grade, Conditioned (ft^2)`, `Wall Area, Above-Grade, Exterior (ft^2)`, `Wall Area, Below-Grade (ft^2)`, `Floor Area, Conditioned (ft^2)`, `Floor Area, Conditioned * Infiltration Reduction (ft^2 * Delta ACH50)`, `Floor Area, Lighting (ft^2)`, `Floor Area, Foundation (ft^2)`, `Floor Area, Attic (ft^2)`, `Floor Area, Attic * Insulation Increase (ft^2 * Delta R-value)`, `Roof Area (ft^2)`, `Window Area (ft^2)`, `Door Area (ft^2)`, `Duct Unconditioned Surface Area (ft^2)`, `Rim Joist Area, Above-Grade, Exterior (ft^2)`, `Slab Perimeter, Exposed, Conditioned (ft)`, `Size, Heating System Primary (kBtu/h)`, `Size, Heating System Secondary (kBtu/h)`, `Size, Cooling System Primary (kBtu/h)`, `Size, Heat Pump Backup Primary (kBtu/h)`, `Size, Water Heater (gal)`, `Flow Rate, Mechanical Ventilation (cfm)`
**Option 4 Lifetime** The option lifetime. - **Name:** ``option_4_lifetime`` - **Type:** ``Double`` - **Units:** ``years`` - **Required:** ``false``
**Option 5** Specify the parameter|option as found in resources\options_lookup.tsv. - **Name:** ``option_5`` - **Type:** ``String`` - **Required:** ``false``
**Option 5 Apply Logic** Logic that specifies if the Option 5 upgrade will apply based on the existing building's options. Specify one or more parameter|option as found in resources\options_lookup.tsv. When multiple are included, they must be separated by '||' for OR and '&&' for AND, and using parentheses as appropriate. Prefix an option with '!' for not. - **Name:** ``option_5_apply_logic`` - **Type:** ``String`` - **Required:** ``false``
**Option 5 Cost 1 Value** Total option 5 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_5_cost_1_value`` - **Type:** ``Double`` - **Units:** ``$`` - **Required:** ``false``
**Option 5 Cost 1 Multiplier** Total option 5 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_5_cost_1_multiplier`` - **Type:** ``Choice`` - **Required:** ``false`` - **Choices:** ``, `Fixed (1)`, `Wall Area, Above-Grade, Conditioned (ft^2)`, `Wall Area, Above-Grade, Exterior (ft^2)`, `Wall Area, Below-Grade (ft^2)`, `Floor Area, Conditioned (ft^2)`, `Floor Area, Conditioned * Infiltration Reduction (ft^2 * Delta ACH50)`, `Floor Area, Lighting (ft^2)`, `Floor Area, Foundation (ft^2)`, `Floor Area, Attic (ft^2)`, `Floor Area, Attic * Insulation Increase (ft^2 * Delta R-value)`, `Roof Area (ft^2)`, `Window Area (ft^2)`, `Door Area (ft^2)`, `Duct Unconditioned Surface Area (ft^2)`, `Rim Joist Area, Above-Grade, Exterior (ft^2)`, `Slab Perimeter, Exposed, Conditioned (ft)`, `Size, Heating System Primary (kBtu/h)`, `Size, Heating System Secondary (kBtu/h)`, `Size, Cooling System Primary (kBtu/h)`, `Size, Heat Pump Backup Primary (kBtu/h)`, `Size, Water Heater (gal)`, `Flow Rate, Mechanical Ventilation (cfm)`
**Option 5 Cost 2 Value** Total option 5 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_5_cost_2_value`` - **Type:** ``Double`` - **Units:** ``$`` - **Required:** ``false``
**Option 5 Cost 2 Multiplier** Total option 5 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_5_cost_2_multiplier`` - **Type:** ``Choice`` - **Required:** ``false`` - **Choices:** ``, `Fixed (1)`, `Wall Area, Above-Grade, Conditioned (ft^2)`, `Wall Area, Above-Grade, Exterior (ft^2)`, `Wall Area, Below-Grade (ft^2)`, `Floor Area, Conditioned (ft^2)`, `Floor Area, Conditioned * Infiltration Reduction (ft^2 * Delta ACH50)`, `Floor Area, Lighting (ft^2)`, `Floor Area, Foundation (ft^2)`, `Floor Area, Attic (ft^2)`, `Floor Area, Attic * Insulation Increase (ft^2 * Delta R-value)`, `Roof Area (ft^2)`, `Window Area (ft^2)`, `Door Area (ft^2)`, `Duct Unconditioned Surface Area (ft^2)`, `Rim Joist Area, Above-Grade, Exterior (ft^2)`, `Slab Perimeter, Exposed, Conditioned (ft)`, `Size, Heating System Primary (kBtu/h)`, `Size, Heating System Secondary (kBtu/h)`, `Size, Cooling System Primary (kBtu/h)`, `Size, Heat Pump Backup Primary (kBtu/h)`, `Size, Water Heater (gal)`, `Flow Rate, Mechanical Ventilation (cfm)`
**Option 5 Lifetime** The option lifetime. - **Name:** ``option_5_lifetime`` - **Type:** ``Double`` - **Units:** ``years`` - **Required:** ``false``
**Option 6** Specify the parameter|option as found in resources\options_lookup.tsv. - **Name:** ``option_6`` - **Type:** ``String`` - **Required:** ``false``
**Option 6 Apply Logic** Logic that specifies if the Option 6 upgrade will apply based on the existing building's options. Specify one or more parameter|option as found in resources\options_lookup.tsv. When multiple are included, they must be separated by '||' for OR and '&&' for AND, and using parentheses as appropriate. Prefix an option with '!' for not. - **Name:** ``option_6_apply_logic`` - **Type:** ``String`` - **Required:** ``false``
**Option 6 Cost 1 Value** Total option 6 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_6_cost_1_value`` - **Type:** ``Double`` - **Units:** ``$`` - **Required:** ``false``
**Option 6 Cost 1 Multiplier** Total option 6 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_6_cost_1_multiplier`` - **Type:** ``Choice`` - **Required:** ``false`` - **Choices:** ``, `Fixed (1)`, `Wall Area, Above-Grade, Conditioned (ft^2)`, `Wall Area, Above-Grade, Exterior (ft^2)`, `Wall Area, Below-Grade (ft^2)`, `Floor Area, Conditioned (ft^2)`, `Floor Area, Conditioned * Infiltration Reduction (ft^2 * Delta ACH50)`, `Floor Area, Lighting (ft^2)`, `Floor Area, Foundation (ft^2)`, `Floor Area, Attic (ft^2)`, `Floor Area, Attic * Insulation Increase (ft^2 * Delta R-value)`, `Roof Area (ft^2)`, `Window Area (ft^2)`, `Door Area (ft^2)`, `Duct Unconditioned Surface Area (ft^2)`, `Rim Joist Area, Above-Grade, Exterior (ft^2)`, `Slab Perimeter, Exposed, Conditioned (ft)`, `Size, Heating System Primary (kBtu/h)`, `Size, Heating System Secondary (kBtu/h)`, `Size, Cooling System Primary (kBtu/h)`, `Size, Heat Pump Backup Primary (kBtu/h)`, `Size, Water Heater (gal)`, `Flow Rate, Mechanical Ventilation (cfm)`
**Option 6 Cost 2 Value** Total option 6 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_6_cost_2_value`` - **Type:** ``Double`` - **Units:** ``$`` - **Required:** ``false``
**Option 6 Cost 2 Multiplier** Total option 6 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_6_cost_2_multiplier`` - **Type:** ``Choice`` - **Required:** ``false`` - **Choices:** ``, `Fixed (1)`, `Wall Area, Above-Grade, Conditioned (ft^2)`, `Wall Area, Above-Grade, Exterior (ft^2)`, `Wall Area, Below-Grade (ft^2)`, `Floor Area, Conditioned (ft^2)`, `Floor Area, Conditioned * Infiltration Reduction (ft^2 * Delta ACH50)`, `Floor Area, Lighting (ft^2)`, `Floor Area, Foundation (ft^2)`, `Floor Area, Attic (ft^2)`, `Floor Area, Attic * Insulation Increase (ft^2 * Delta R-value)`, `Roof Area (ft^2)`, `Window Area (ft^2)`, `Door Area (ft^2)`, `Duct Unconditioned Surface Area (ft^2)`, `Rim Joist Area, Above-Grade, Exterior (ft^2)`, `Slab Perimeter, Exposed, Conditioned (ft)`, `Size, Heating System Primary (kBtu/h)`, `Size, Heating System Secondary (kBtu/h)`, `Size, Cooling System Primary (kBtu/h)`, `Size, Heat Pump Backup Primary (kBtu/h)`, `Size, Water Heater (gal)`, `Flow Rate, Mechanical Ventilation (cfm)`
**Option 6 Lifetime** The option lifetime. - **Name:** ``option_6_lifetime`` - **Type:** ``Double`` - **Units:** ``years`` - **Required:** ``false``
**Option 7** Specify the parameter|option as found in resources\options_lookup.tsv. - **Name:** ``option_7`` - **Type:** ``String`` - **Required:** ``false``
**Option 7 Apply Logic** Logic that specifies if the Option 7 upgrade will apply based on the existing building's options. Specify one or more parameter|option as found in resources\options_lookup.tsv. When multiple are included, they must be separated by '||' for OR and '&&' for AND, and using parentheses as appropriate. Prefix an option with '!' for not. - **Name:** ``option_7_apply_logic`` - **Type:** ``String`` - **Required:** ``false``
**Option 7 Cost 1 Value** Total option 7 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_7_cost_1_value`` - **Type:** ``Double`` - **Units:** ``$`` - **Required:** ``false``
**Option 7 Cost 1 Multiplier** Total option 7 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_7_cost_1_multiplier`` - **Type:** ``Choice`` - **Required:** ``false`` - **Choices:** ``, `Fixed (1)`, `Wall Area, Above-Grade, Conditioned (ft^2)`, `Wall Area, Above-Grade, Exterior (ft^2)`, `Wall Area, Below-Grade (ft^2)`, `Floor Area, Conditioned (ft^2)`, `Floor Area, Conditioned * Infiltration Reduction (ft^2 * Delta ACH50)`, `Floor Area, Lighting (ft^2)`, `Floor Area, Foundation (ft^2)`, `Floor Area, Attic (ft^2)`, `Floor Area, Attic * Insulation Increase (ft^2 * Delta R-value)`, `Roof Area (ft^2)`, `Window Area (ft^2)`, `Door Area (ft^2)`, `Duct Unconditioned Surface Area (ft^2)`, `Rim Joist Area, Above-Grade, Exterior (ft^2)`, `Slab Perimeter, Exposed, Conditioned (ft)`, `Size, Heating System Primary (kBtu/h)`, `Size, Heating System Secondary (kBtu/h)`, `Size, Cooling System Primary (kBtu/h)`, `Size, Heat Pump Backup Primary (kBtu/h)`, `Size, Water Heater (gal)`, `Flow Rate, Mechanical Ventilation (cfm)`
**Option 7 Cost 2 Value** Total option 7 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_7_cost_2_value`` - **Type:** ``Double`` - **Units:** ``$`` - **Required:** ``false``
**Option 7 Cost 2 Multiplier** Total option 7 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_7_cost_2_multiplier`` - **Type:** ``Choice`` - **Required:** ``false`` - **Choices:** ``, `Fixed (1)`, `Wall Area, Above-Grade, Conditioned (ft^2)`, `Wall Area, Above-Grade, Exterior (ft^2)`, `Wall Area, Below-Grade (ft^2)`, `Floor Area, Conditioned (ft^2)`, `Floor Area, Conditioned * Infiltration Reduction (ft^2 * Delta ACH50)`, `Floor Area, Lighting (ft^2)`, `Floor Area, Foundation (ft^2)`, `Floor Area, Attic (ft^2)`, `Floor Area, Attic * Insulation Increase (ft^2 * Delta R-value)`, `Roof Area (ft^2)`, `Window Area (ft^2)`, `Door Area (ft^2)`, `Duct Unconditioned Surface Area (ft^2)`, `Rim Joist Area, Above-Grade, Exterior (ft^2)`, `Slab Perimeter, Exposed, Conditioned (ft)`, `Size, Heating System Primary (kBtu/h)`, `Size, Heating System Secondary (kBtu/h)`, `Size, Cooling System Primary (kBtu/h)`, `Size, Heat Pump Backup Primary (kBtu/h)`, `Size, Water Heater (gal)`, `Flow Rate, Mechanical Ventilation (cfm)`
**Option 7 Lifetime** The option lifetime. - **Name:** ``option_7_lifetime`` - **Type:** ``Double`` - **Units:** ``years`` - **Required:** ``false``
**Option 8** Specify the parameter|option as found in resources\options_lookup.tsv. - **Name:** ``option_8`` - **Type:** ``String`` - **Required:** ``false``
**Option 8 Apply Logic** Logic that specifies if the Option 8 upgrade will apply based on the existing building's options. Specify one or more parameter|option as found in resources\options_lookup.tsv. When multiple are included, they must be separated by '||' for OR and '&&' for AND, and using parentheses as appropriate. Prefix an option with '!' for not. - **Name:** ``option_8_apply_logic`` - **Type:** ``String`` - **Required:** ``false``
**Option 8 Cost 1 Value** Total option 8 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_8_cost_1_value`` - **Type:** ``Double`` - **Units:** ``$`` - **Required:** ``false``
**Option 8 Cost 1 Multiplier** Total option 8 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_8_cost_1_multiplier`` - **Type:** ``Choice`` - **Required:** ``false`` - **Choices:** ``, `Fixed (1)`, `Wall Area, Above-Grade, Conditioned (ft^2)`, `Wall Area, Above-Grade, Exterior (ft^2)`, `Wall Area, Below-Grade (ft^2)`, `Floor Area, Conditioned (ft^2)`, `Floor Area, Conditioned * Infiltration Reduction (ft^2 * Delta ACH50)`, `Floor Area, Lighting (ft^2)`, `Floor Area, Foundation (ft^2)`, `Floor Area, Attic (ft^2)`, `Floor Area, Attic * Insulation Increase (ft^2 * Delta R-value)`, `Roof Area (ft^2)`, `Window Area (ft^2)`, `Door Area (ft^2)`, `Duct Unconditioned Surface Area (ft^2)`, `Rim Joist Area, Above-Grade, Exterior (ft^2)`, `Slab Perimeter, Exposed, Conditioned (ft)`, `Size, Heating System Primary (kBtu/h)`, `Size, Heating System Secondary (kBtu/h)`, `Size, Cooling System Primary (kBtu/h)`, `Size, Heat Pump Backup Primary (kBtu/h)`, `Size, Water Heater (gal)`, `Flow Rate, Mechanical Ventilation (cfm)`
**Option 8 Cost 2 Value** Total option 8 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_8_cost_2_value`` - **Type:** ``Double`` - **Units:** ``$`` - **Required:** ``false``
**Option 8 Cost 2 Multiplier** Total option 8 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_8_cost_2_multiplier`` - **Type:** ``Choice`` - **Required:** ``false`` - **Choices:** ``, `Fixed (1)`, `Wall Area, Above-Grade, Conditioned (ft^2)`, `Wall Area, Above-Grade, Exterior (ft^2)`, `Wall Area, Below-Grade (ft^2)`, `Floor Area, Conditioned (ft^2)`, `Floor Area, Conditioned * Infiltration Reduction (ft^2 * Delta ACH50)`, `Floor Area, Lighting (ft^2)`, `Floor Area, Foundation (ft^2)`, `Floor Area, Attic (ft^2)`, `Floor Area, Attic * Insulation Increase (ft^2 * Delta R-value)`, `Roof Area (ft^2)`, `Window Area (ft^2)`, `Door Area (ft^2)`, `Duct Unconditioned Surface Area (ft^2)`, `Rim Joist Area, Above-Grade, Exterior (ft^2)`, `Slab Perimeter, Exposed, Conditioned (ft)`, `Size, Heating System Primary (kBtu/h)`, `Size, Heating System Secondary (kBtu/h)`, `Size, Cooling System Primary (kBtu/h)`, `Size, Heat Pump Backup Primary (kBtu/h)`, `Size, Water Heater (gal)`, `Flow Rate, Mechanical Ventilation (cfm)`
**Option 8 Lifetime** The option lifetime. - **Name:** ``option_8_lifetime`` - **Type:** ``Double`` - **Units:** ``years`` - **Required:** ``false``
**Option 9** Specify the parameter|option as found in resources\options_lookup.tsv. - **Name:** ``option_9`` - **Type:** ``String`` - **Required:** ``false``
**Option 9 Apply Logic** Logic that specifies if the Option 9 upgrade will apply based on the existing building's options. Specify one or more parameter|option as found in resources\options_lookup.tsv. When multiple are included, they must be separated by '||' for OR and '&&' for AND, and using parentheses as appropriate. Prefix an option with '!' for not. - **Name:** ``option_9_apply_logic`` - **Type:** ``String`` - **Required:** ``false``
**Option 9 Cost 1 Value** Total option 9 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_9_cost_1_value`` - **Type:** ``Double`` - **Units:** ``$`` - **Required:** ``false``
**Option 9 Cost 1 Multiplier** Total option 9 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_9_cost_1_multiplier`` - **Type:** ``Choice`` - **Required:** ``false`` - **Choices:** ``, `Fixed (1)`, `Wall Area, Above-Grade, Conditioned (ft^2)`, `Wall Area, Above-Grade, Exterior (ft^2)`, `Wall Area, Below-Grade (ft^2)`, `Floor Area, Conditioned (ft^2)`, `Floor Area, Conditioned * Infiltration Reduction (ft^2 * Delta ACH50)`, `Floor Area, Lighting (ft^2)`, `Floor Area, Foundation (ft^2)`, `Floor Area, Attic (ft^2)`, `Floor Area, Attic * Insulation Increase (ft^2 * Delta R-value)`, `Roof Area (ft^2)`, `Window Area (ft^2)`, `Door Area (ft^2)`, `Duct Unconditioned Surface Area (ft^2)`, `Rim Joist Area, Above-Grade, Exterior (ft^2)`, `Slab Perimeter, Exposed, Conditioned (ft)`, `Size, Heating System Primary (kBtu/h)`, `Size, Heating System Secondary (kBtu/h)`, `Size, Cooling System Primary (kBtu/h)`, `Size, Heat Pump Backup Primary (kBtu/h)`, `Size, Water Heater (gal)`, `Flow Rate, Mechanical Ventilation (cfm)`
**Option 9 Cost 2 Value** Total option 9 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_9_cost_2_value`` - **Type:** ``Double`` - **Units:** ``$`` - **Required:** ``false``
**Option 9 Cost 2 Multiplier** Total option 9 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_9_cost_2_multiplier`` - **Type:** ``Choice`` - **Required:** ``false`` - **Choices:** ``, `Fixed (1)`, `Wall Area, Above-Grade, Conditioned (ft^2)`, `Wall Area, Above-Grade, Exterior (ft^2)`, `Wall Area, Below-Grade (ft^2)`, `Floor Area, Conditioned (ft^2)`, `Floor Area, Conditioned * Infiltration Reduction (ft^2 * Delta ACH50)`, `Floor Area, Lighting (ft^2)`, `Floor Area, Foundation (ft^2)`, `Floor Area, Attic (ft^2)`, `Floor Area, Attic * Insulation Increase (ft^2 * Delta R-value)`, `Roof Area (ft^2)`, `Window Area (ft^2)`, `Door Area (ft^2)`, `Duct Unconditioned Surface Area (ft^2)`, `Rim Joist Area, Above-Grade, Exterior (ft^2)`, `Slab Perimeter, Exposed, Conditioned (ft)`, `Size, Heating System Primary (kBtu/h)`, `Size, Heating System Secondary (kBtu/h)`, `Size, Cooling System Primary (kBtu/h)`, `Size, Heat Pump Backup Primary (kBtu/h)`, `Size, Water Heater (gal)`, `Flow Rate, Mechanical Ventilation (cfm)`
**Option 9 Lifetime** The option lifetime. - **Name:** ``option_9_lifetime`` - **Type:** ``Double`` - **Units:** ``years`` - **Required:** ``false``
**Option 10** Specify the parameter|option as found in resources\options_lookup.tsv. - **Name:** ``option_10`` - **Type:** ``String`` - **Required:** ``false``
**Option 10 Apply Logic** Logic that specifies if the Option 10 upgrade will apply based on the existing building's options. Specify one or more parameter|option as found in resources\options_lookup.tsv. When multiple are included, they must be separated by '||' for OR and '&&' for AND, and using parentheses as appropriate. Prefix an option with '!' for not. - **Name:** ``option_10_apply_logic`` - **Type:** ``String`` - **Required:** ``false``
**Option 10 Cost 1 Value** Total option 10 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_10_cost_1_value`` - **Type:** ``Double`` - **Units:** ``$`` - **Required:** ``false``
**Option 10 Cost 1 Multiplier** Total option 10 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_10_cost_1_multiplier`` - **Type:** ``Choice`` - **Required:** ``false`` - **Choices:** ``, `Fixed (1)`, `Wall Area, Above-Grade, Conditioned (ft^2)`, `Wall Area, Above-Grade, Exterior (ft^2)`, `Wall Area, Below-Grade (ft^2)`, `Floor Area, Conditioned (ft^2)`, `Floor Area, Conditioned * Infiltration Reduction (ft^2 * Delta ACH50)`, `Floor Area, Lighting (ft^2)`, `Floor Area, Foundation (ft^2)`, `Floor Area, Attic (ft^2)`, `Floor Area, Attic * Insulation Increase (ft^2 * Delta R-value)`, `Roof Area (ft^2)`, `Window Area (ft^2)`, `Door Area (ft^2)`, `Duct Unconditioned Surface Area (ft^2)`, `Rim Joist Area, Above-Grade, Exterior (ft^2)`, `Slab Perimeter, Exposed, Conditioned (ft)`, `Size, Heating System Primary (kBtu/h)`, `Size, Heating System Secondary (kBtu/h)`, `Size, Cooling System Primary (kBtu/h)`, `Size, Heat Pump Backup Primary (kBtu/h)`, `Size, Water Heater (gal)`, `Flow Rate, Mechanical Ventilation (cfm)`
**Option 10 Cost 2 Value** Total option 10 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_10_cost_2_value`` - **Type:** ``Double`` - **Units:** ``$`` - **Required:** ``false``
**Option 10 Cost 2 Multiplier** Total option 10 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_10_cost_2_multiplier`` - **Type:** ``Choice`` - **Required:** ``false`` - **Choices:** ``, `Fixed (1)`, `Wall Area, Above-Grade, Conditioned (ft^2)`, `Wall Area, Above-Grade, Exterior (ft^2)`, `Wall Area, Below-Grade (ft^2)`, `Floor Area, Conditioned (ft^2)`, `Floor Area, Conditioned * Infiltration Reduction (ft^2 * Delta ACH50)`, `Floor Area, Lighting (ft^2)`, `Floor Area, Foundation (ft^2)`, `Floor Area, Attic (ft^2)`, `Floor Area, Attic * Insulation Increase (ft^2 * Delta R-value)`, `Roof Area (ft^2)`, `Window Area (ft^2)`, `Door Area (ft^2)`, `Duct Unconditioned Surface Area (ft^2)`, `Rim Joist Area, Above-Grade, Exterior (ft^2)`, `Slab Perimeter, Exposed, Conditioned (ft)`, `Size, Heating System Primary (kBtu/h)`, `Size, Heating System Secondary (kBtu/h)`, `Size, Cooling System Primary (kBtu/h)`, `Size, Heat Pump Backup Primary (kBtu/h)`, `Size, Water Heater (gal)`, `Flow Rate, Mechanical Ventilation (cfm)`
**Option 10 Lifetime** The option lifetime. - **Name:** ``option_10_lifetime`` - **Type:** ``Double`` - **Units:** ``years`` - **Required:** ``false``
**Option 11** Specify the parameter|option as found in resources\options_lookup.tsv. - **Name:** ``option_11`` - **Type:** ``String`` - **Required:** ``false``
**Option 11 Apply Logic** Logic that specifies if the Option 11 upgrade will apply based on the existing building's options. Specify one or more parameter|option as found in resources\options_lookup.tsv. When multiple are included, they must be separated by '||' for OR and '&&' for AND, and using parentheses as appropriate. Prefix an option with '!' for not. - **Name:** ``option_11_apply_logic`` - **Type:** ``String`` - **Required:** ``false``
**Option 11 Cost 1 Value** Total option 11 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_11_cost_1_value`` - **Type:** ``Double`` - **Units:** ``$`` - **Required:** ``false``
**Option 11 Cost 1 Multiplier** Total option 11 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_11_cost_1_multiplier`` - **Type:** ``Choice`` - **Required:** ``false`` - **Choices:** ``, `Fixed (1)`, `Wall Area, Above-Grade, Conditioned (ft^2)`, `Wall Area, Above-Grade, Exterior (ft^2)`, `Wall Area, Below-Grade (ft^2)`, `Floor Area, Conditioned (ft^2)`, `Floor Area, Conditioned * Infiltration Reduction (ft^2 * Delta ACH50)`, `Floor Area, Lighting (ft^2)`, `Floor Area, Foundation (ft^2)`, `Floor Area, Attic (ft^2)`, `Floor Area, Attic * Insulation Increase (ft^2 * Delta R-value)`, `Roof Area (ft^2)`, `Window Area (ft^2)`, `Door Area (ft^2)`, `Duct Unconditioned Surface Area (ft^2)`, `Rim Joist Area, Above-Grade, Exterior (ft^2)`, `Slab Perimeter, Exposed, Conditioned (ft)`, `Size, Heating System Primary (kBtu/h)`, `Size, Heating System Secondary (kBtu/h)`, `Size, Cooling System Primary (kBtu/h)`, `Size, Heat Pump Backup Primary (kBtu/h)`, `Size, Water Heater (gal)`, `Flow Rate, Mechanical Ventilation (cfm)`
**Option 11 Cost 2 Value** Total option 11 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_11_cost_2_value`` - **Type:** ``Double`` - **Units:** ``$`` - **Required:** ``false``
**Option 11 Cost 2 Multiplier** Total option 11 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_11_cost_2_multiplier`` - **Type:** ``Choice`` - **Required:** ``false`` - **Choices:** ``, `Fixed (1)`, `Wall Area, Above-Grade, Conditioned (ft^2)`, `Wall Area, Above-Grade, Exterior (ft^2)`, `Wall Area, Below-Grade (ft^2)`, `Floor Area, Conditioned (ft^2)`, `Floor Area, Conditioned * Infiltration Reduction (ft^2 * Delta ACH50)`, `Floor Area, Lighting (ft^2)`, `Floor Area, Foundation (ft^2)`, `Floor Area, Attic (ft^2)`, `Floor Area, Attic * Insulation Increase (ft^2 * Delta R-value)`, `Roof Area (ft^2)`, `Window Area (ft^2)`, `Door Area (ft^2)`, `Duct Unconditioned Surface Area (ft^2)`, `Rim Joist Area, Above-Grade, Exterior (ft^2)`, `Slab Perimeter, Exposed, Conditioned (ft)`, `Size, Heating System Primary (kBtu/h)`, `Size, Heating System Secondary (kBtu/h)`, `Size, Cooling System Primary (kBtu/h)`, `Size, Heat Pump Backup Primary (kBtu/h)`, `Size, Water Heater (gal)`, `Flow Rate, Mechanical Ventilation (cfm)`
**Option 11 Lifetime** The option lifetime. - **Name:** ``option_11_lifetime`` - **Type:** ``Double`` - **Units:** ``years`` - **Required:** ``false``
**Option 12** Specify the parameter|option as found in resources\options_lookup.tsv. - **Name:** ``option_12`` - **Type:** ``String`` - **Required:** ``false``
**Option 12 Apply Logic** Logic that specifies if the Option 12 upgrade will apply based on the existing building's options. Specify one or more parameter|option as found in resources\options_lookup.tsv. When multiple are included, they must be separated by '||' for OR and '&&' for AND, and using parentheses as appropriate. Prefix an option with '!' for not. - **Name:** ``option_12_apply_logic`` - **Type:** ``String`` - **Required:** ``false``
**Option 12 Cost 1 Value** Total option 12 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_12_cost_1_value`` - **Type:** ``Double`` - **Units:** ``$`` - **Required:** ``false``
**Option 12 Cost 1 Multiplier** Total option 12 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_12_cost_1_multiplier`` - **Type:** ``Choice`` - **Required:** ``false`` - **Choices:** ``, `Fixed (1)`, `Wall Area, Above-Grade, Conditioned (ft^2)`, `Wall Area, Above-Grade, Exterior (ft^2)`, `Wall Area, Below-Grade (ft^2)`, `Floor Area, Conditioned (ft^2)`, `Floor Area, Conditioned * Infiltration Reduction (ft^2 * Delta ACH50)`, `Floor Area, Lighting (ft^2)`, `Floor Area, Foundation (ft^2)`, `Floor Area, Attic (ft^2)`, `Floor Area, Attic * Insulation Increase (ft^2 * Delta R-value)`, `Roof Area (ft^2)`, `Window Area (ft^2)`, `Door Area (ft^2)`, `Duct Unconditioned Surface Area (ft^2)`, `Rim Joist Area, Above-Grade, Exterior (ft^2)`, `Slab Perimeter, Exposed, Conditioned (ft)`, `Size, Heating System Primary (kBtu/h)`, `Size, Heating System Secondary (kBtu/h)`, `Size, Cooling System Primary (kBtu/h)`, `Size, Heat Pump Backup Primary (kBtu/h)`, `Size, Water Heater (gal)`, `Flow Rate, Mechanical Ventilation (cfm)`
**Option 12 Cost 2 Value** Total option 12 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_12_cost_2_value`` - **Type:** ``Double`` - **Units:** ``$`` - **Required:** ``false``
**Option 12 Cost 2 Multiplier** Total option 12 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_12_cost_2_multiplier`` - **Type:** ``Choice`` - **Required:** ``false`` - **Choices:** ``, `Fixed (1)`, `Wall Area, Above-Grade, Conditioned (ft^2)`, `Wall Area, Above-Grade, Exterior (ft^2)`, `Wall Area, Below-Grade (ft^2)`, `Floor Area, Conditioned (ft^2)`, `Floor Area, Conditioned * Infiltration Reduction (ft^2 * Delta ACH50)`, `Floor Area, Lighting (ft^2)`, `Floor Area, Foundation (ft^2)`, `Floor Area, Attic (ft^2)`, `Floor Area, Attic * Insulation Increase (ft^2 * Delta R-value)`, `Roof Area (ft^2)`, `Window Area (ft^2)`, `Door Area (ft^2)`, `Duct Unconditioned Surface Area (ft^2)`, `Rim Joist Area, Above-Grade, Exterior (ft^2)`, `Slab Perimeter, Exposed, Conditioned (ft)`, `Size, Heating System Primary (kBtu/h)`, `Size, Heating System Secondary (kBtu/h)`, `Size, Cooling System Primary (kBtu/h)`, `Size, Heat Pump Backup Primary (kBtu/h)`, `Size, Water Heater (gal)`, `Flow Rate, Mechanical Ventilation (cfm)`
**Option 12 Lifetime** The option lifetime. - **Name:** ``option_12_lifetime`` - **Type:** ``Double`` - **Units:** ``years`` - **Required:** ``false``
**Option 13** Specify the parameter|option as found in resources\options_lookup.tsv. - **Name:** ``option_13`` - **Type:** ``String`` - **Required:** ``false``
**Option 13 Apply Logic** Logic that specifies if the Option 13 upgrade will apply based on the existing building's options. Specify one or more parameter|option as found in resources\options_lookup.tsv. When multiple are included, they must be separated by '||' for OR and '&&' for AND, and using parentheses as appropriate. Prefix an option with '!' for not. - **Name:** ``option_13_apply_logic`` - **Type:** ``String`` - **Required:** ``false``
**Option 13 Cost 1 Value** Total option 13 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_13_cost_1_value`` - **Type:** ``Double`` - **Units:** ``$`` - **Required:** ``false``
**Option 13 Cost 1 Multiplier** Total option 13 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_13_cost_1_multiplier`` - **Type:** ``Choice`` - **Required:** ``false`` - **Choices:** ``, `Fixed (1)`, `Wall Area, Above-Grade, Conditioned (ft^2)`, `Wall Area, Above-Grade, Exterior (ft^2)`, `Wall Area, Below-Grade (ft^2)`, `Floor Area, Conditioned (ft^2)`, `Floor Area, Conditioned * Infiltration Reduction (ft^2 * Delta ACH50)`, `Floor Area, Lighting (ft^2)`, `Floor Area, Foundation (ft^2)`, `Floor Area, Attic (ft^2)`, `Floor Area, Attic * Insulation Increase (ft^2 * Delta R-value)`, `Roof Area (ft^2)`, `Window Area (ft^2)`, `Door Area (ft^2)`, `Duct Unconditioned Surface Area (ft^2)`, `Rim Joist Area, Above-Grade, Exterior (ft^2)`, `Slab Perimeter, Exposed, Conditioned (ft)`, `Size, Heating System Primary (kBtu/h)`, `Size, Heating System Secondary (kBtu/h)`, `Size, Cooling System Primary (kBtu/h)`, `Size, Heat Pump Backup Primary (kBtu/h)`, `Size, Water Heater (gal)`, `Flow Rate, Mechanical Ventilation (cfm)`
**Option 13 Cost 2 Value** Total option 13 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_13_cost_2_value`` - **Type:** ``Double`` - **Units:** ``$`` - **Required:** ``false``
**Option 13 Cost 2 Multiplier** Total option 13 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_13_cost_2_multiplier`` - **Type:** ``Choice`` - **Required:** ``false`` - **Choices:** ``, `Fixed (1)`, `Wall Area, Above-Grade, Conditioned (ft^2)`, `Wall Area, Above-Grade, Exterior (ft^2)`, `Wall Area, Below-Grade (ft^2)`, `Floor Area, Conditioned (ft^2)`, `Floor Area, Conditioned * Infiltration Reduction (ft^2 * Delta ACH50)`, `Floor Area, Lighting (ft^2)`, `Floor Area, Foundation (ft^2)`, `Floor Area, Attic (ft^2)`, `Floor Area, Attic * Insulation Increase (ft^2 * Delta R-value)`, `Roof Area (ft^2)`, `Window Area (ft^2)`, `Door Area (ft^2)`, `Duct Unconditioned Surface Area (ft^2)`, `Rim Joist Area, Above-Grade, Exterior (ft^2)`, `Slab Perimeter, Exposed, Conditioned (ft)`, `Size, Heating System Primary (kBtu/h)`, `Size, Heating System Secondary (kBtu/h)`, `Size, Cooling System Primary (kBtu/h)`, `Size, Heat Pump Backup Primary (kBtu/h)`, `Size, Water Heater (gal)`, `Flow Rate, Mechanical Ventilation (cfm)`
**Option 13 Lifetime** The option lifetime. - **Name:** ``option_13_lifetime`` - **Type:** ``Double`` - **Units:** ``years`` - **Required:** ``false``
**Option 14** Specify the parameter|option as found in resources\options_lookup.tsv. - **Name:** ``option_14`` - **Type:** ``String`` - **Required:** ``false``
**Option 14 Apply Logic** Logic that specifies if the Option 14 upgrade will apply based on the existing building's options. Specify one or more parameter|option as found in resources\options_lookup.tsv. When multiple are included, they must be separated by '||' for OR and '&&' for AND, and using parentheses as appropriate. Prefix an option with '!' for not. - **Name:** ``option_14_apply_logic`` - **Type:** ``String`` - **Required:** ``false``
**Option 14 Cost 1 Value** Total option 14 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_14_cost_1_value`` - **Type:** ``Double`` - **Units:** ``$`` - **Required:** ``false``
**Option 14 Cost 1 Multiplier** Total option 14 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_14_cost_1_multiplier`` - **Type:** ``Choice`` - **Required:** ``false`` - **Choices:** ``, `Fixed (1)`, `Wall Area, Above-Grade, Conditioned (ft^2)`, `Wall Area, Above-Grade, Exterior (ft^2)`, `Wall Area, Below-Grade (ft^2)`, `Floor Area, Conditioned (ft^2)`, `Floor Area, Conditioned * Infiltration Reduction (ft^2 * Delta ACH50)`, `Floor Area, Lighting (ft^2)`, `Floor Area, Foundation (ft^2)`, `Floor Area, Attic (ft^2)`, `Floor Area, Attic * Insulation Increase (ft^2 * Delta R-value)`, `Roof Area (ft^2)`, `Window Area (ft^2)`, `Door Area (ft^2)`, `Duct Unconditioned Surface Area (ft^2)`, `Rim Joist Area, Above-Grade, Exterior (ft^2)`, `Slab Perimeter, Exposed, Conditioned (ft)`, `Size, Heating System Primary (kBtu/h)`, `Size, Heating System Secondary (kBtu/h)`, `Size, Cooling System Primary (kBtu/h)`, `Size, Heat Pump Backup Primary (kBtu/h)`, `Size, Water Heater (gal)`, `Flow Rate, Mechanical Ventilation (cfm)`
**Option 14 Cost 2 Value** Total option 14 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_14_cost_2_value`` - **Type:** ``Double`` - **Units:** ``$`` - **Required:** ``false``
**Option 14 Cost 2 Multiplier** Total option 14 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_14_cost_2_multiplier`` - **Type:** ``Choice`` - **Required:** ``false`` - **Choices:** ``, `Fixed (1)`, `Wall Area, Above-Grade, Conditioned (ft^2)`, `Wall Area, Above-Grade, Exterior (ft^2)`, `Wall Area, Below-Grade (ft^2)`, `Floor Area, Conditioned (ft^2)`, `Floor Area, Conditioned * Infiltration Reduction (ft^2 * Delta ACH50)`, `Floor Area, Lighting (ft^2)`, `Floor Area, Foundation (ft^2)`, `Floor Area, Attic (ft^2)`, `Floor Area, Attic * Insulation Increase (ft^2 * Delta R-value)`, `Roof Area (ft^2)`, `Window Area (ft^2)`, `Door Area (ft^2)`, `Duct Unconditioned Surface Area (ft^2)`, `Rim Joist Area, Above-Grade, Exterior (ft^2)`, `Slab Perimeter, Exposed, Conditioned (ft)`, `Size, Heating System Primary (kBtu/h)`, `Size, Heating System Secondary (kBtu/h)`, `Size, Cooling System Primary (kBtu/h)`, `Size, Heat Pump Backup Primary (kBtu/h)`, `Size, Water Heater (gal)`, `Flow Rate, Mechanical Ventilation (cfm)`
**Option 14 Lifetime** The option lifetime. - **Name:** ``option_14_lifetime`` - **Type:** ``Double`` - **Units:** ``years`` - **Required:** ``false``
**Option 15** Specify the parameter|option as found in resources\options_lookup.tsv. - **Name:** ``option_15`` - **Type:** ``String`` - **Required:** ``false``
**Option 15 Apply Logic** Logic that specifies if the Option 15 upgrade will apply based on the existing building's options. Specify one or more parameter|option as found in resources\options_lookup.tsv. When multiple are included, they must be separated by '||' for OR and '&&' for AND, and using parentheses as appropriate. Prefix an option with '!' for not. - **Name:** ``option_15_apply_logic`` - **Type:** ``String`` - **Required:** ``false``
**Option 15 Cost 1 Value** Total option 15 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_15_cost_1_value`` - **Type:** ``Double`` - **Units:** ``$`` - **Required:** ``false``
**Option 15 Cost 1 Multiplier** Total option 15 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_15_cost_1_multiplier`` - **Type:** ``Choice`` - **Required:** ``false`` - **Choices:** ``, `Fixed (1)`, `Wall Area, Above-Grade, Conditioned (ft^2)`, `Wall Area, Above-Grade, Exterior (ft^2)`, `Wall Area, Below-Grade (ft^2)`, `Floor Area, Conditioned (ft^2)`, `Floor Area, Conditioned * Infiltration Reduction (ft^2 * Delta ACH50)`, `Floor Area, Lighting (ft^2)`, `Floor Area, Foundation (ft^2)`, `Floor Area, Attic (ft^2)`, `Floor Area, Attic * Insulation Increase (ft^2 * Delta R-value)`, `Roof Area (ft^2)`, `Window Area (ft^2)`, `Door Area (ft^2)`, `Duct Unconditioned Surface Area (ft^2)`, `Rim Joist Area, Above-Grade, Exterior (ft^2)`, `Slab Perimeter, Exposed, Conditioned (ft)`, `Size, Heating System Primary (kBtu/h)`, `Size, Heating System Secondary (kBtu/h)`, `Size, Cooling System Primary (kBtu/h)`, `Size, Heat Pump Backup Primary (kBtu/h)`, `Size, Water Heater (gal)`, `Flow Rate, Mechanical Ventilation (cfm)`
**Option 15 Cost 2 Value** Total option 15 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_15_cost_2_value`` - **Type:** ``Double`` - **Units:** ``$`` - **Required:** ``false``
**Option 15 Cost 2 Multiplier** Total option 15 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_15_cost_2_multiplier`` - **Type:** ``Choice`` - **Required:** ``false`` - **Choices:** ``, `Fixed (1)`, `Wall Area, Above-Grade, Conditioned (ft^2)`, `Wall Area, Above-Grade, Exterior (ft^2)`, `Wall Area, Below-Grade (ft^2)`, `Floor Area, Conditioned (ft^2)`, `Floor Area, Conditioned * Infiltration Reduction (ft^2 * Delta ACH50)`, `Floor Area, Lighting (ft^2)`, `Floor Area, Foundation (ft^2)`, `Floor Area, Attic (ft^2)`, `Floor Area, Attic * Insulation Increase (ft^2 * Delta R-value)`, `Roof Area (ft^2)`, `Window Area (ft^2)`, `Door Area (ft^2)`, `Duct Unconditioned Surface Area (ft^2)`, `Rim Joist Area, Above-Grade, Exterior (ft^2)`, `Slab Perimeter, Exposed, Conditioned (ft)`, `Size, Heating System Primary (kBtu/h)`, `Size, Heating System Secondary (kBtu/h)`, `Size, Cooling System Primary (kBtu/h)`, `Size, Heat Pump Backup Primary (kBtu/h)`, `Size, Water Heater (gal)`, `Flow Rate, Mechanical Ventilation (cfm)`
**Option 15 Lifetime** The option lifetime. - **Name:** ``option_15_lifetime`` - **Type:** ``Double`` - **Units:** ``years`` - **Required:** ``false``
**Option 16** Specify the parameter|option as found in resources\options_lookup.tsv. - **Name:** ``option_16`` - **Type:** ``String`` - **Required:** ``false``
**Option 16 Apply Logic** Logic that specifies if the Option 16 upgrade will apply based on the existing building's options. Specify one or more parameter|option as found in resources\options_lookup.tsv. When multiple are included, they must be separated by '||' for OR and '&&' for AND, and using parentheses as appropriate. Prefix an option with '!' for not. - **Name:** ``option_16_apply_logic`` - **Type:** ``String`` - **Required:** ``false``
**Option 16 Cost 1 Value** Total option 16 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_16_cost_1_value`` - **Type:** ``Double`` - **Units:** ``$`` - **Required:** ``false``
**Option 16 Cost 1 Multiplier** Total option 16 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_16_cost_1_multiplier`` - **Type:** ``Choice`` - **Required:** ``false`` - **Choices:** ``, `Fixed (1)`, `Wall Area, Above-Grade, Conditioned (ft^2)`, `Wall Area, Above-Grade, Exterior (ft^2)`, `Wall Area, Below-Grade (ft^2)`, `Floor Area, Conditioned (ft^2)`, `Floor Area, Conditioned * Infiltration Reduction (ft^2 * Delta ACH50)`, `Floor Area, Lighting (ft^2)`, `Floor Area, Foundation (ft^2)`, `Floor Area, Attic (ft^2)`, `Floor Area, Attic * Insulation Increase (ft^2 * Delta R-value)`, `Roof Area (ft^2)`, `Window Area (ft^2)`, `Door Area (ft^2)`, `Duct Unconditioned Surface Area (ft^2)`, `Rim Joist Area, Above-Grade, Exterior (ft^2)`, `Slab Perimeter, Exposed, Conditioned (ft)`, `Size, Heating System Primary (kBtu/h)`, `Size, Heating System Secondary (kBtu/h)`, `Size, Cooling System Primary (kBtu/h)`, `Size, Heat Pump Backup Primary (kBtu/h)`, `Size, Water Heater (gal)`, `Flow Rate, Mechanical Ventilation (cfm)`
**Option 16 Cost 2 Value** Total option 16 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_16_cost_2_value`` - **Type:** ``Double`` - **Units:** ``$`` - **Required:** ``false``
**Option 16 Cost 2 Multiplier** Total option 16 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_16_cost_2_multiplier`` - **Type:** ``Choice`` - **Required:** ``false`` - **Choices:** ``, `Fixed (1)`, `Wall Area, Above-Grade, Conditioned (ft^2)`, `Wall Area, Above-Grade, Exterior (ft^2)`, `Wall Area, Below-Grade (ft^2)`, `Floor Area, Conditioned (ft^2)`, `Floor Area, Conditioned * Infiltration Reduction (ft^2 * Delta ACH50)`, `Floor Area, Lighting (ft^2)`, `Floor Area, Foundation (ft^2)`, `Floor Area, Attic (ft^2)`, `Floor Area, Attic * Insulation Increase (ft^2 * Delta R-value)`, `Roof Area (ft^2)`, `Window Area (ft^2)`, `Door Area (ft^2)`, `Duct Unconditioned Surface Area (ft^2)`, `Rim Joist Area, Above-Grade, Exterior (ft^2)`, `Slab Perimeter, Exposed, Conditioned (ft)`, `Size, Heating System Primary (kBtu/h)`, `Size, Heating System Secondary (kBtu/h)`, `Size, Cooling System Primary (kBtu/h)`, `Size, Heat Pump Backup Primary (kBtu/h)`, `Size, Water Heater (gal)`, `Flow Rate, Mechanical Ventilation (cfm)`
**Option 16 Lifetime** The option lifetime. - **Name:** ``option_16_lifetime`` - **Type:** ``Double`` - **Units:** ``years`` - **Required:** ``false``
**Option 17** Specify the parameter|option as found in resources\options_lookup.tsv. - **Name:** ``option_17`` - **Type:** ``String`` - **Required:** ``false``
**Option 17 Apply Logic** Logic that specifies if the Option 17 upgrade will apply based on the existing building's options. Specify one or more parameter|option as found in resources\options_lookup.tsv. When multiple are included, they must be separated by '||' for OR and '&&' for AND, and using parentheses as appropriate. Prefix an option with '!' for not. - **Name:** ``option_17_apply_logic`` - **Type:** ``String`` - **Required:** ``false``
**Option 17 Cost 1 Value** Total option 17 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_17_cost_1_value`` - **Type:** ``Double`` - **Units:** ``$`` - **Required:** ``false``
**Option 17 Cost 1 Multiplier** Total option 17 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_17_cost_1_multiplier`` - **Type:** ``Choice`` - **Required:** ``false`` - **Choices:** ``, `Fixed (1)`, `Wall Area, Above-Grade, Conditioned (ft^2)`, `Wall Area, Above-Grade, Exterior (ft^2)`, `Wall Area, Below-Grade (ft^2)`, `Floor Area, Conditioned (ft^2)`, `Floor Area, Conditioned * Infiltration Reduction (ft^2 * Delta ACH50)`, `Floor Area, Lighting (ft^2)`, `Floor Area, Foundation (ft^2)`, `Floor Area, Attic (ft^2)`, `Floor Area, Attic * Insulation Increase (ft^2 * Delta R-value)`, `Roof Area (ft^2)`, `Window Area (ft^2)`, `Door Area (ft^2)`, `Duct Unconditioned Surface Area (ft^2)`, `Rim Joist Area, Above-Grade, Exterior (ft^2)`, `Slab Perimeter, Exposed, Conditioned (ft)`, `Size, Heating System Primary (kBtu/h)`, `Size, Heating System Secondary (kBtu/h)`, `Size, Cooling System Primary (kBtu/h)`, `Size, Heat Pump Backup Primary (kBtu/h)`, `Size, Water Heater (gal)`, `Flow Rate, Mechanical Ventilation (cfm)`
**Option 17 Cost 2 Value** Total option 17 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_17_cost_2_value`` - **Type:** ``Double`` - **Units:** ``$`` - **Required:** ``false``
**Option 17 Cost 2 Multiplier** Total option 17 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_17_cost_2_multiplier`` - **Type:** ``Choice`` - **Required:** ``false`` - **Choices:** ``, `Fixed (1)`, `Wall Area, Above-Grade, Conditioned (ft^2)`, `Wall Area, Above-Grade, Exterior (ft^2)`, `Wall Area, Below-Grade (ft^2)`, `Floor Area, Conditioned (ft^2)`, `Floor Area, Conditioned * Infiltration Reduction (ft^2 * Delta ACH50)`, `Floor Area, Lighting (ft^2)`, `Floor Area, Foundation (ft^2)`, `Floor Area, Attic (ft^2)`, `Floor Area, Attic * Insulation Increase (ft^2 * Delta R-value)`, `Roof Area (ft^2)`, `Window Area (ft^2)`, `Door Area (ft^2)`, `Duct Unconditioned Surface Area (ft^2)`, `Rim Joist Area, Above-Grade, Exterior (ft^2)`, `Slab Perimeter, Exposed, Conditioned (ft)`, `Size, Heating System Primary (kBtu/h)`, `Size, Heating System Secondary (kBtu/h)`, `Size, Cooling System Primary (kBtu/h)`, `Size, Heat Pump Backup Primary (kBtu/h)`, `Size, Water Heater (gal)`, `Flow Rate, Mechanical Ventilation (cfm)`
**Option 17 Lifetime** The option lifetime. - **Name:** ``option_17_lifetime`` - **Type:** ``Double`` - **Units:** ``years`` - **Required:** ``false``
**Option 18** Specify the parameter|option as found in resources\options_lookup.tsv. - **Name:** ``option_18`` - **Type:** ``String`` - **Required:** ``false``
**Option 18 Apply Logic** Logic that specifies if the Option 18 upgrade will apply based on the existing building's options. Specify one or more parameter|option as found in resources\options_lookup.tsv. When multiple are included, they must be separated by '||' for OR and '&&' for AND, and using parentheses as appropriate. Prefix an option with '!' for not. - **Name:** ``option_18_apply_logic`` - **Type:** ``String`` - **Required:** ``false``
**Option 18 Cost 1 Value** Total option 18 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_18_cost_1_value`` - **Type:** ``Double`` - **Units:** ``$`` - **Required:** ``false``
**Option 18 Cost 1 Multiplier** Total option 18 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_18_cost_1_multiplier`` - **Type:** ``Choice`` - **Required:** ``false`` - **Choices:** ``, `Fixed (1)`, `Wall Area, Above-Grade, Conditioned (ft^2)`, `Wall Area, Above-Grade, Exterior (ft^2)`, `Wall Area, Below-Grade (ft^2)`, `Floor Area, Conditioned (ft^2)`, `Floor Area, Conditioned * Infiltration Reduction (ft^2 * Delta ACH50)`, `Floor Area, Lighting (ft^2)`, `Floor Area, Foundation (ft^2)`, `Floor Area, Attic (ft^2)`, `Floor Area, Attic * Insulation Increase (ft^2 * Delta R-value)`, `Roof Area (ft^2)`, `Window Area (ft^2)`, `Door Area (ft^2)`, `Duct Unconditioned Surface Area (ft^2)`, `Rim Joist Area, Above-Grade, Exterior (ft^2)`, `Slab Perimeter, Exposed, Conditioned (ft)`, `Size, Heating System Primary (kBtu/h)`, `Size, Heating System Secondary (kBtu/h)`, `Size, Cooling System Primary (kBtu/h)`, `Size, Heat Pump Backup Primary (kBtu/h)`, `Size, Water Heater (gal)`, `Flow Rate, Mechanical Ventilation (cfm)`
**Option 18 Cost 2 Value** Total option 18 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_18_cost_2_value`` - **Type:** ``Double`` - **Units:** ``$`` - **Required:** ``false``
**Option 18 Cost 2 Multiplier** Total option 18 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_18_cost_2_multiplier`` - **Type:** ``Choice`` - **Required:** ``false`` - **Choices:** ``, `Fixed (1)`, `Wall Area, Above-Grade, Conditioned (ft^2)`, `Wall Area, Above-Grade, Exterior (ft^2)`, `Wall Area, Below-Grade (ft^2)`, `Floor Area, Conditioned (ft^2)`, `Floor Area, Conditioned * Infiltration Reduction (ft^2 * Delta ACH50)`, `Floor Area, Lighting (ft^2)`, `Floor Area, Foundation (ft^2)`, `Floor Area, Attic (ft^2)`, `Floor Area, Attic * Insulation Increase (ft^2 * Delta R-value)`, `Roof Area (ft^2)`, `Window Area (ft^2)`, `Door Area (ft^2)`, `Duct Unconditioned Surface Area (ft^2)`, `Rim Joist Area, Above-Grade, Exterior (ft^2)`, `Slab Perimeter, Exposed, Conditioned (ft)`, `Size, Heating System Primary (kBtu/h)`, `Size, Heating System Secondary (kBtu/h)`, `Size, Cooling System Primary (kBtu/h)`, `Size, Heat Pump Backup Primary (kBtu/h)`, `Size, Water Heater (gal)`, `Flow Rate, Mechanical Ventilation (cfm)`
**Option 18 Lifetime** The option lifetime. - **Name:** ``option_18_lifetime`` - **Type:** ``Double`` - **Units:** ``years`` - **Required:** ``false``
**Option 19** Specify the parameter|option as found in resources\options_lookup.tsv. - **Name:** ``option_19`` - **Type:** ``String`` - **Required:** ``false``
**Option 19 Apply Logic** Logic that specifies if the Option 19 upgrade will apply based on the existing building's options. Specify one or more parameter|option as found in resources\options_lookup.tsv. When multiple are included, they must be separated by '||' for OR and '&&' for AND, and using parentheses as appropriate. Prefix an option with '!' for not. - **Name:** ``option_19_apply_logic`` - **Type:** ``String`` - **Required:** ``false``
**Option 19 Cost 1 Value** Total option 19 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_19_cost_1_value`` - **Type:** ``Double`` - **Units:** ``$`` - **Required:** ``false``
**Option 19 Cost 1 Multiplier** Total option 19 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_19_cost_1_multiplier`` - **Type:** ``Choice`` - **Required:** ``false`` - **Choices:** ``, `Fixed (1)`, `Wall Area, Above-Grade, Conditioned (ft^2)`, `Wall Area, Above-Grade, Exterior (ft^2)`, `Wall Area, Below-Grade (ft^2)`, `Floor Area, Conditioned (ft^2)`, `Floor Area, Conditioned * Infiltration Reduction (ft^2 * Delta ACH50)`, `Floor Area, Lighting (ft^2)`, `Floor Area, Foundation (ft^2)`, `Floor Area, Attic (ft^2)`, `Floor Area, Attic * Insulation Increase (ft^2 * Delta R-value)`, `Roof Area (ft^2)`, `Window Area (ft^2)`, `Door Area (ft^2)`, `Duct Unconditioned Surface Area (ft^2)`, `Rim Joist Area, Above-Grade, Exterior (ft^2)`, `Slab Perimeter, Exposed, Conditioned (ft)`, `Size, Heating System Primary (kBtu/h)`, `Size, Heating System Secondary (kBtu/h)`, `Size, Cooling System Primary (kBtu/h)`, `Size, Heat Pump Backup Primary (kBtu/h)`, `Size, Water Heater (gal)`, `Flow Rate, Mechanical Ventilation (cfm)`
**Option 19 Cost 2 Value** Total option 19 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_19_cost_2_value`` - **Type:** ``Double`` - **Units:** ``$`` - **Required:** ``false``
**Option 19 Cost 2 Multiplier** Total option 19 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_19_cost_2_multiplier`` - **Type:** ``Choice`` - **Required:** ``false`` - **Choices:** ``, `Fixed (1)`, `Wall Area, Above-Grade, Conditioned (ft^2)`, `Wall Area, Above-Grade, Exterior (ft^2)`, `Wall Area, Below-Grade (ft^2)`, `Floor Area, Conditioned (ft^2)`, `Floor Area, Conditioned * Infiltration Reduction (ft^2 * Delta ACH50)`, `Floor Area, Lighting (ft^2)`, `Floor Area, Foundation (ft^2)`, `Floor Area, Attic (ft^2)`, `Floor Area, Attic * Insulation Increase (ft^2 * Delta R-value)`, `Roof Area (ft^2)`, `Window Area (ft^2)`, `Door Area (ft^2)`, `Duct Unconditioned Surface Area (ft^2)`, `Rim Joist Area, Above-Grade, Exterior (ft^2)`, `Slab Perimeter, Exposed, Conditioned (ft)`, `Size, Heating System Primary (kBtu/h)`, `Size, Heating System Secondary (kBtu/h)`, `Size, Cooling System Primary (kBtu/h)`, `Size, Heat Pump Backup Primary (kBtu/h)`, `Size, Water Heater (gal)`, `Flow Rate, Mechanical Ventilation (cfm)`
**Option 19 Lifetime** The option lifetime. - **Name:** ``option_19_lifetime`` - **Type:** ``Double`` - **Units:** ``years`` - **Required:** ``false``
**Option 20** Specify the parameter|option as found in resources\options_lookup.tsv. - **Name:** ``option_20`` - **Type:** ``String`` - **Required:** ``false``
**Option 20 Apply Logic** Logic that specifies if the Option 20 upgrade will apply based on the existing building's options. Specify one or more parameter|option as found in resources\options_lookup.tsv. When multiple are included, they must be separated by '||' for OR and '&&' for AND, and using parentheses as appropriate. Prefix an option with '!' for not. - **Name:** ``option_20_apply_logic`` - **Type:** ``String`` - **Required:** ``false``
**Option 20 Cost 1 Value** Total option 20 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_20_cost_1_value`` - **Type:** ``Double`` - **Units:** ``$`` - **Required:** ``false``
**Option 20 Cost 1 Multiplier** Total option 20 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_20_cost_1_multiplier`` - **Type:** ``Choice`` - **Required:** ``false`` - **Choices:** ``, `Fixed (1)`, `Wall Area, Above-Grade, Conditioned (ft^2)`, `Wall Area, Above-Grade, Exterior (ft^2)`, `Wall Area, Below-Grade (ft^2)`, `Floor Area, Conditioned (ft^2)`, `Floor Area, Conditioned * Infiltration Reduction (ft^2 * Delta ACH50)`, `Floor Area, Lighting (ft^2)`, `Floor Area, Foundation (ft^2)`, `Floor Area, Attic (ft^2)`, `Floor Area, Attic * Insulation Increase (ft^2 * Delta R-value)`, `Roof Area (ft^2)`, `Window Area (ft^2)`, `Door Area (ft^2)`, `Duct Unconditioned Surface Area (ft^2)`, `Rim Joist Area, Above-Grade, Exterior (ft^2)`, `Slab Perimeter, Exposed, Conditioned (ft)`, `Size, Heating System Primary (kBtu/h)`, `Size, Heating System Secondary (kBtu/h)`, `Size, Cooling System Primary (kBtu/h)`, `Size, Heat Pump Backup Primary (kBtu/h)`, `Size, Water Heater (gal)`, `Flow Rate, Mechanical Ventilation (cfm)`
**Option 20 Cost 2 Value** Total option 20 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_20_cost_2_value`` - **Type:** ``Double`` - **Units:** ``$`` - **Required:** ``false``
**Option 20 Cost 2 Multiplier** Total option 20 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_20_cost_2_multiplier`` - **Type:** ``Choice`` - **Required:** ``false`` - **Choices:** ``, `Fixed (1)`, `Wall Area, Above-Grade, Conditioned (ft^2)`, `Wall Area, Above-Grade, Exterior (ft^2)`, `Wall Area, Below-Grade (ft^2)`, `Floor Area, Conditioned (ft^2)`, `Floor Area, Conditioned * Infiltration Reduction (ft^2 * Delta ACH50)`, `Floor Area, Lighting (ft^2)`, `Floor Area, Foundation (ft^2)`, `Floor Area, Attic (ft^2)`, `Floor Area, Attic * Insulation Increase (ft^2 * Delta R-value)`, `Roof Area (ft^2)`, `Window Area (ft^2)`, `Door Area (ft^2)`, `Duct Unconditioned Surface Area (ft^2)`, `Rim Joist Area, Above-Grade, Exterior (ft^2)`, `Slab Perimeter, Exposed, Conditioned (ft)`, `Size, Heating System Primary (kBtu/h)`, `Size, Heating System Secondary (kBtu/h)`, `Size, Cooling System Primary (kBtu/h)`, `Size, Heat Pump Backup Primary (kBtu/h)`, `Size, Water Heater (gal)`, `Flow Rate, Mechanical Ventilation (cfm)`
**Option 20 Lifetime** The option lifetime. - **Name:** ``option_20_lifetime`` - **Type:** ``Double`` - **Units:** ``years`` - **Required:** ``false``
**Option 21** Specify the parameter|option as found in resources\options_lookup.tsv. - **Name:** ``option_21`` - **Type:** ``String`` - **Required:** ``false``
**Option 21 Apply Logic** Logic that specifies if the Option 21 upgrade will apply based on the existing building's options. Specify one or more parameter|option as found in resources\options_lookup.tsv. When multiple are included, they must be separated by '||' for OR and '&&' for AND, and using parentheses as appropriate. Prefix an option with '!' for not. - **Name:** ``option_21_apply_logic`` - **Type:** ``String`` - **Required:** ``false``
**Option 21 Cost 1 Value** Total option 21 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_21_cost_1_value`` - **Type:** ``Double`` - **Units:** ``$`` - **Required:** ``false``
**Option 21 Cost 1 Multiplier** Total option 21 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_21_cost_1_multiplier`` - **Type:** ``Choice`` - **Required:** ``false`` - **Choices:** ``, `Fixed (1)`, `Wall Area, Above-Grade, Conditioned (ft^2)`, `Wall Area, Above-Grade, Exterior (ft^2)`, `Wall Area, Below-Grade (ft^2)`, `Floor Area, Conditioned (ft^2)`, `Floor Area, Conditioned * Infiltration Reduction (ft^2 * Delta ACH50)`, `Floor Area, Lighting (ft^2)`, `Floor Area, Foundation (ft^2)`, `Floor Area, Attic (ft^2)`, `Floor Area, Attic * Insulation Increase (ft^2 * Delta R-value)`, `Roof Area (ft^2)`, `Window Area (ft^2)`, `Door Area (ft^2)`, `Duct Unconditioned Surface Area (ft^2)`, `Rim Joist Area, Above-Grade, Exterior (ft^2)`, `Slab Perimeter, Exposed, Conditioned (ft)`, `Size, Heating System Primary (kBtu/h)`, `Size, Heating System Secondary (kBtu/h)`, `Size, Cooling System Primary (kBtu/h)`, `Size, Heat Pump Backup Primary (kBtu/h)`, `Size, Water Heater (gal)`, `Flow Rate, Mechanical Ventilation (cfm)`
**Option 21 Cost 2 Value** Total option 21 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_21_cost_2_value`` - **Type:** ``Double`` - **Units:** ``$`` - **Required:** ``false``
**Option 21 Cost 2 Multiplier** Total option 21 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_21_cost_2_multiplier`` - **Type:** ``Choice`` - **Required:** ``false`` - **Choices:** ``, `Fixed (1)`, `Wall Area, Above-Grade, Conditioned (ft^2)`, `Wall Area, Above-Grade, Exterior (ft^2)`, `Wall Area, Below-Grade (ft^2)`, `Floor Area, Conditioned (ft^2)`, `Floor Area, Conditioned * Infiltration Reduction (ft^2 * Delta ACH50)`, `Floor Area, Lighting (ft^2)`, `Floor Area, Foundation (ft^2)`, `Floor Area, Attic (ft^2)`, `Floor Area, Attic * Insulation Increase (ft^2 * Delta R-value)`, `Roof Area (ft^2)`, `Window Area (ft^2)`, `Door Area (ft^2)`, `Duct Unconditioned Surface Area (ft^2)`, `Rim Joist Area, Above-Grade, Exterior (ft^2)`, `Slab Perimeter, Exposed, Conditioned (ft)`, `Size, Heating System Primary (kBtu/h)`, `Size, Heating System Secondary (kBtu/h)`, `Size, Cooling System Primary (kBtu/h)`, `Size, Heat Pump Backup Primary (kBtu/h)`, `Size, Water Heater (gal)`, `Flow Rate, Mechanical Ventilation (cfm)`
**Option 21 Lifetime** The option lifetime. - **Name:** ``option_21_lifetime`` - **Type:** ``Double`` - **Units:** ``years`` - **Required:** ``false``
**Option 22** Specify the parameter|option as found in resources\options_lookup.tsv. - **Name:** ``option_22`` - **Type:** ``String`` - **Required:** ``false``
**Option 22 Apply Logic** Logic that specifies if the Option 22 upgrade will apply based on the existing building's options. Specify one or more parameter|option as found in resources\options_lookup.tsv. When multiple are included, they must be separated by '||' for OR and '&&' for AND, and using parentheses as appropriate. Prefix an option with '!' for not. - **Name:** ``option_22_apply_logic`` - **Type:** ``String`` - **Required:** ``false``
**Option 22 Cost 1 Value** Total option 22 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_22_cost_1_value`` - **Type:** ``Double`` - **Units:** ``$`` - **Required:** ``false``
**Option 22 Cost 1 Multiplier** Total option 22 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_22_cost_1_multiplier`` - **Type:** ``Choice`` - **Required:** ``false`` - **Choices:** ``, `Fixed (1)`, `Wall Area, Above-Grade, Conditioned (ft^2)`, `Wall Area, Above-Grade, Exterior (ft^2)`, `Wall Area, Below-Grade (ft^2)`, `Floor Area, Conditioned (ft^2)`, `Floor Area, Conditioned * Infiltration Reduction (ft^2 * Delta ACH50)`, `Floor Area, Lighting (ft^2)`, `Floor Area, Foundation (ft^2)`, `Floor Area, Attic (ft^2)`, `Floor Area, Attic * Insulation Increase (ft^2 * Delta R-value)`, `Roof Area (ft^2)`, `Window Area (ft^2)`, `Door Area (ft^2)`, `Duct Unconditioned Surface Area (ft^2)`, `Rim Joist Area, Above-Grade, Exterior (ft^2)`, `Slab Perimeter, Exposed, Conditioned (ft)`, `Size, Heating System Primary (kBtu/h)`, `Size, Heating System Secondary (kBtu/h)`, `Size, Cooling System Primary (kBtu/h)`, `Size, Heat Pump Backup Primary (kBtu/h)`, `Size, Water Heater (gal)`, `Flow Rate, Mechanical Ventilation (cfm)`
**Option 22 Cost 2 Value** Total option 22 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_22_cost_2_value`` - **Type:** ``Double`` - **Units:** ``$`` - **Required:** ``false``
**Option 22 Cost 2 Multiplier** Total option 22 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_22_cost_2_multiplier`` - **Type:** ``Choice`` - **Required:** ``false`` - **Choices:** ``, `Fixed (1)`, `Wall Area, Above-Grade, Conditioned (ft^2)`, `Wall Area, Above-Grade, Exterior (ft^2)`, `Wall Area, Below-Grade (ft^2)`, `Floor Area, Conditioned (ft^2)`, `Floor Area, Conditioned * Infiltration Reduction (ft^2 * Delta ACH50)`, `Floor Area, Lighting (ft^2)`, `Floor Area, Foundation (ft^2)`, `Floor Area, Attic (ft^2)`, `Floor Area, Attic * Insulation Increase (ft^2 * Delta R-value)`, `Roof Area (ft^2)`, `Window Area (ft^2)`, `Door Area (ft^2)`, `Duct Unconditioned Surface Area (ft^2)`, `Rim Joist Area, Above-Grade, Exterior (ft^2)`, `Slab Perimeter, Exposed, Conditioned (ft)`, `Size, Heating System Primary (kBtu/h)`, `Size, Heating System Secondary (kBtu/h)`, `Size, Cooling System Primary (kBtu/h)`, `Size, Heat Pump Backup Primary (kBtu/h)`, `Size, Water Heater (gal)`, `Flow Rate, Mechanical Ventilation (cfm)`
**Option 22 Lifetime** The option lifetime. - **Name:** ``option_22_lifetime`` - **Type:** ``Double`` - **Units:** ``years`` - **Required:** ``false``
**Option 23** Specify the parameter|option as found in resources\options_lookup.tsv. - **Name:** ``option_23`` - **Type:** ``String`` - **Required:** ``false``
**Option 23 Apply Logic** Logic that specifies if the Option 23 upgrade will apply based on the existing building's options. Specify one or more parameter|option as found in resources\options_lookup.tsv. When multiple are included, they must be separated by '||' for OR and '&&' for AND, and using parentheses as appropriate. Prefix an option with '!' for not. - **Name:** ``option_23_apply_logic`` - **Type:** ``String`` - **Required:** ``false``
**Option 23 Cost 1 Value** Total option 23 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_23_cost_1_value`` - **Type:** ``Double`` - **Units:** ``$`` - **Required:** ``false``
**Option 23 Cost 1 Multiplier** Total option 23 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_23_cost_1_multiplier`` - **Type:** ``Choice`` - **Required:** ``false`` - **Choices:** ``, `Fixed (1)`, `Wall Area, Above-Grade, Conditioned (ft^2)`, `Wall Area, Above-Grade, Exterior (ft^2)`, `Wall Area, Below-Grade (ft^2)`, `Floor Area, Conditioned (ft^2)`, `Floor Area, Conditioned * Infiltration Reduction (ft^2 * Delta ACH50)`, `Floor Area, Lighting (ft^2)`, `Floor Area, Foundation (ft^2)`, `Floor Area, Attic (ft^2)`, `Floor Area, Attic * Insulation Increase (ft^2 * Delta R-value)`, `Roof Area (ft^2)`, `Window Area (ft^2)`, `Door Area (ft^2)`, `Duct Unconditioned Surface Area (ft^2)`, `Rim Joist Area, Above-Grade, Exterior (ft^2)`, `Slab Perimeter, Exposed, Conditioned (ft)`, `Size, Heating System Primary (kBtu/h)`, `Size, Heating System Secondary (kBtu/h)`, `Size, Cooling System Primary (kBtu/h)`, `Size, Heat Pump Backup Primary (kBtu/h)`, `Size, Water Heater (gal)`, `Flow Rate, Mechanical Ventilation (cfm)`
**Option 23 Cost 2 Value** Total option 23 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_23_cost_2_value`` - **Type:** ``Double`` - **Units:** ``$`` - **Required:** ``false``
**Option 23 Cost 2 Multiplier** Total option 23 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_23_cost_2_multiplier`` - **Type:** ``Choice`` - **Required:** ``false`` - **Choices:** ``, `Fixed (1)`, `Wall Area, Above-Grade, Conditioned (ft^2)`, `Wall Area, Above-Grade, Exterior (ft^2)`, `Wall Area, Below-Grade (ft^2)`, `Floor Area, Conditioned (ft^2)`, `Floor Area, Conditioned * Infiltration Reduction (ft^2 * Delta ACH50)`, `Floor Area, Lighting (ft^2)`, `Floor Area, Foundation (ft^2)`, `Floor Area, Attic (ft^2)`, `Floor Area, Attic * Insulation Increase (ft^2 * Delta R-value)`, `Roof Area (ft^2)`, `Window Area (ft^2)`, `Door Area (ft^2)`, `Duct Unconditioned Surface Area (ft^2)`, `Rim Joist Area, Above-Grade, Exterior (ft^2)`, `Slab Perimeter, Exposed, Conditioned (ft)`, `Size, Heating System Primary (kBtu/h)`, `Size, Heating System Secondary (kBtu/h)`, `Size, Cooling System Primary (kBtu/h)`, `Size, Heat Pump Backup Primary (kBtu/h)`, `Size, Water Heater (gal)`, `Flow Rate, Mechanical Ventilation (cfm)`
**Option 23 Lifetime** The option lifetime. - **Name:** ``option_23_lifetime`` - **Type:** ``Double`` - **Units:** ``years`` - **Required:** ``false``
**Option 24** Specify the parameter|option as found in resources\options_lookup.tsv. - **Name:** ``option_24`` - **Type:** ``String`` - **Required:** ``false``
**Option 24 Apply Logic** Logic that specifies if the Option 24 upgrade will apply based on the existing building's options. Specify one or more parameter|option as found in resources\options_lookup.tsv. When multiple are included, they must be separated by '||' for OR and '&&' for AND, and using parentheses as appropriate. Prefix an option with '!' for not. - **Name:** ``option_24_apply_logic`` - **Type:** ``String`` - **Required:** ``false``
**Option 24 Cost 1 Value** Total option 24 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_24_cost_1_value`` - **Type:** ``Double`` - **Units:** ``$`` - **Required:** ``false``
**Option 24 Cost 1 Multiplier** Total option 24 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_24_cost_1_multiplier`` - **Type:** ``Choice`` - **Required:** ``false`` - **Choices:** ``, `Fixed (1)`, `Wall Area, Above-Grade, Conditioned (ft^2)`, `Wall Area, Above-Grade, Exterior (ft^2)`, `Wall Area, Below-Grade (ft^2)`, `Floor Area, Conditioned (ft^2)`, `Floor Area, Conditioned * Infiltration Reduction (ft^2 * Delta ACH50)`, `Floor Area, Lighting (ft^2)`, `Floor Area, Foundation (ft^2)`, `Floor Area, Attic (ft^2)`, `Floor Area, Attic * Insulation Increase (ft^2 * Delta R-value)`, `Roof Area (ft^2)`, `Window Area (ft^2)`, `Door Area (ft^2)`, `Duct Unconditioned Surface Area (ft^2)`, `Rim Joist Area, Above-Grade, Exterior (ft^2)`, `Slab Perimeter, Exposed, Conditioned (ft)`, `Size, Heating System Primary (kBtu/h)`, `Size, Heating System Secondary (kBtu/h)`, `Size, Cooling System Primary (kBtu/h)`, `Size, Heat Pump Backup Primary (kBtu/h)`, `Size, Water Heater (gal)`, `Flow Rate, Mechanical Ventilation (cfm)`
**Option 24 Cost 2 Value** Total option 24 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_24_cost_2_value`` - **Type:** ``Double`` - **Units:** ``$`` - **Required:** ``false``
**Option 24 Cost 2 Multiplier** Total option 24 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_24_cost_2_multiplier`` - **Type:** ``Choice`` - **Required:** ``false`` - **Choices:** ``, `Fixed (1)`, `Wall Area, Above-Grade, Conditioned (ft^2)`, `Wall Area, Above-Grade, Exterior (ft^2)`, `Wall Area, Below-Grade (ft^2)`, `Floor Area, Conditioned (ft^2)`, `Floor Area, Conditioned * Infiltration Reduction (ft^2 * Delta ACH50)`, `Floor Area, Lighting (ft^2)`, `Floor Area, Foundation (ft^2)`, `Floor Area, Attic (ft^2)`, `Floor Area, Attic * Insulation Increase (ft^2 * Delta R-value)`, `Roof Area (ft^2)`, `Window Area (ft^2)`, `Door Area (ft^2)`, `Duct Unconditioned Surface Area (ft^2)`, `Rim Joist Area, Above-Grade, Exterior (ft^2)`, `Slab Perimeter, Exposed, Conditioned (ft)`, `Size, Heating System Primary (kBtu/h)`, `Size, Heating System Secondary (kBtu/h)`, `Size, Cooling System Primary (kBtu/h)`, `Size, Heat Pump Backup Primary (kBtu/h)`, `Size, Water Heater (gal)`, `Flow Rate, Mechanical Ventilation (cfm)`
**Option 24 Lifetime** The option lifetime. - **Name:** ``option_24_lifetime`` - **Type:** ``Double`` - **Units:** ``years`` - **Required:** ``false``
**Option 25** Specify the parameter|option as found in resources\options_lookup.tsv. - **Name:** ``option_25`` - **Type:** ``String`` - **Required:** ``false``
**Option 25 Apply Logic** Logic that specifies if the Option 25 upgrade will apply based on the existing building's options. Specify one or more parameter|option as found in resources\options_lookup.tsv. When multiple are included, they must be separated by '||' for OR and '&&' for AND, and using parentheses as appropriate. Prefix an option with '!' for not. - **Name:** ``option_25_apply_logic`` - **Type:** ``String`` - **Required:** ``false``
**Option 25 Cost 1 Value** Total option 25 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_25_cost_1_value`` - **Type:** ``Double`` - **Units:** ``$`` - **Required:** ``false``
**Option 25 Cost 1 Multiplier** Total option 25 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_25_cost_1_multiplier`` - **Type:** ``Choice`` - **Required:** ``false`` - **Choices:** ``, `Fixed (1)`, `Wall Area, Above-Grade, Conditioned (ft^2)`, `Wall Area, Above-Grade, Exterior (ft^2)`, `Wall Area, Below-Grade (ft^2)`, `Floor Area, Conditioned (ft^2)`, `Floor Area, Conditioned * Infiltration Reduction (ft^2 * Delta ACH50)`, `Floor Area, Lighting (ft^2)`, `Floor Area, Foundation (ft^2)`, `Floor Area, Attic (ft^2)`, `Floor Area, Attic * Insulation Increase (ft^2 * Delta R-value)`, `Roof Area (ft^2)`, `Window Area (ft^2)`, `Door Area (ft^2)`, `Duct Unconditioned Surface Area (ft^2)`, `Rim Joist Area, Above-Grade, Exterior (ft^2)`, `Slab Perimeter, Exposed, Conditioned (ft)`, `Size, Heating System Primary (kBtu/h)`, `Size, Heating System Secondary (kBtu/h)`, `Size, Cooling System Primary (kBtu/h)`, `Size, Heat Pump Backup Primary (kBtu/h)`, `Size, Water Heater (gal)`, `Flow Rate, Mechanical Ventilation (cfm)`
**Option 25 Cost 2 Value** Total option 25 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_25_cost_2_value`` - **Type:** ``Double`` - **Units:** ``$`` - **Required:** ``false``
**Option 25 Cost 2 Multiplier** Total option 25 cost is the sum of all: (Cost N Value) x (Cost N Multiplier). - **Name:** ``option_25_cost_2_multiplier`` - **Type:** ``Choice`` - **Required:** ``false`` - **Choices:** ``, `Fixed (1)`, `Wall Area, Above-Grade, Conditioned (ft^2)`, `Wall Area, Above-Grade, Exterior (ft^2)`, `Wall Area, Below-Grade (ft^2)`, `Floor Area, Conditioned (ft^2)`, `Floor Area, Conditioned * Infiltration Reduction (ft^2 * Delta ACH50)`, `Floor Area, Lighting (ft^2)`, `Floor Area, Foundation (ft^2)`, `Floor Area, Attic (ft^2)`, `Floor Area, Attic * Insulation Increase (ft^2 * Delta R-value)`, `Roof Area (ft^2)`, `Window Area (ft^2)`, `Door Area (ft^2)`, `Duct Unconditioned Surface Area (ft^2)`, `Rim Joist Area, Above-Grade, Exterior (ft^2)`, `Slab Perimeter, Exposed, Conditioned (ft)`, `Size, Heating System Primary (kBtu/h)`, `Size, Heating System Secondary (kBtu/h)`, `Size, Cooling System Primary (kBtu/h)`, `Size, Heat Pump Backup Primary (kBtu/h)`, `Size, Water Heater (gal)`, `Flow Rate, Mechanical Ventilation (cfm)`
**Option 25 Lifetime** The option lifetime. - **Name:** ``option_25_lifetime`` - **Type:** ``Double`` - **Units:** ``years`` - **Required:** ``false``
**Package Apply Logic** Logic that specifies if the entire package upgrade (all options) will apply based on the existing building's options. Specify one or more parameter|option as found in resources\options_lookup.tsv. When multiple are included, they must be separated by '||' for OR and '&&' for AND, and using parentheses as appropriate. Prefix an option with '!' for not. - **Name:** ``package_apply_logic`` - **Type:** ``String`` - **Required:** ``false``
**Run Measure** integer argument to run measure [1 is run, 0 is no run] - **Name:** ``run_measure`` - **Type:** ``Integer`` - **Required:** ``true``