/* * This is an OpenSSL-compatible implementation of the RSA Data Security, Inc. * MD5 Message-Digest Algorithm (RFC 1321). * * Homepage: * http://openwall.info/wiki/people/solar/software/public-domain-source-code/md5 * * Author: * Alexander Peslyak, better known as Solar Designer * * This software was written by Alexander Peslyak in 2001. No copyright is * claimed, and the software is hereby placed in the public domain. * In case this attempt to disclaim copyright and place the software in the * public domain is deemed null and void, then the software is * Copyright (c) 2001 Alexander Peslyak and it is hereby released to the * general public under the following terms: * * Redistribution and use in source and binary forms, with or without * modification, are permitted. * * There's ABSOLUTELY NO WARRANTY, express or implied. * * (This is a heavily cut-down "BSD license".) * * This differs from Colin Plumb's older public domain implementation in that * no exactly 32-bit integer data type is required (any 32-bit or wider * unsigned integer data type will do), there's no compile-time endianness * configuration, and the function prototypes match OpenSSL's. No code from * Colin Plumb's implementation has been reused; this comment merely compares * the properties of the two independent implementations. * * The primary goals of this implementation are portability and ease of use. * It is meant to be fast, but not as fast as possible. Some known * optimizations are not included to reduce source code size and avoid * compile-time configuration. */ #ifndef HAVE_OPENSSL #include #include "md5.h" /* * The basic MD5 functions. * * F and G are optimized compared to their RFC 1321 definitions for * architectures that lack an AND-NOT instruction, just like in Colin Plumb's * implementation. */ #define F(x, y, z) ((z) ^ ((x) & ((y) ^ (z)))) #define G(x, y, z) ((y) ^ ((z) & ((x) ^ (y)))) #define H(x, y, z) ((x) ^ (y) ^ (z)) #define I(x, y, z) ((y) ^ ((x) | ~(z))) /* * The MD5 transformation for all four rounds. */ #define STEP(f, a, b, c, d, x, t, s) \ (a) += f((b), (c), (d)) + (x) + (t); \ (a) = (((a) << (s)) | (((a) & 0xffffffff) >> (32 - (s)))); \ (a) += (b); /* * SET reads 4 input bytes in little-endian byte order and stores them * in a properly aligned word in host byte order. * * The check for little-endian architectures that tolerate unaligned * memory accesses is just an optimization. Nothing will break if it * doesn't work. */ #if defined(__i386__) || defined(__x86_64__) || defined(__vax__) #define SET(n) \ (*(MD5_u32plus *)&ptr[(n) * 4]) #define GET(n) \ SET(n) #else #define SET(n) \ (ctx->block[(n)] = \ (MD5_u32plus)ptr[(n) * 4] | \ ((MD5_u32plus)ptr[(n) * 4 + 1] << 8) | \ ((MD5_u32plus)ptr[(n) * 4 + 2] << 16) | \ ((MD5_u32plus)ptr[(n) * 4 + 3] << 24)) #define GET(n) \ (ctx->block[(n)]) #endif /* * This processes one or more 64-byte data blocks, but does NOT update * the bit counters. There are no alignment requirements. */ static void *body(MD5_CTX *ctx, void *data, unsigned long size) { unsigned char *ptr; MD5_u32plus a, b, c, d; MD5_u32plus saved_a, saved_b, saved_c, saved_d; ptr = data; a = ctx->a; b = ctx->b; c = ctx->c; d = ctx->d; do { saved_a = a; saved_b = b; saved_c = c; saved_d = d; /* Round 1 */ STEP(F, a, b, c, d, SET(0), 0xd76aa478, 7) STEP(F, d, a, b, c, SET(1), 0xe8c7b756, 12) STEP(F, c, d, a, b, SET(2), 0x242070db, 17) STEP(F, b, c, d, a, SET(3), 0xc1bdceee, 22) STEP(F, a, b, c, d, SET(4), 0xf57c0faf, 7) STEP(F, d, a, b, c, SET(5), 0x4787c62a, 12) STEP(F, c, d, a, b, SET(6), 0xa8304613, 17) STEP(F, b, c, d, a, SET(7), 0xfd469501, 22) STEP(F, a, b, c, d, SET(8), 0x698098d8, 7) STEP(F, d, a, b, c, SET(9), 0x8b44f7af, 12) STEP(F, c, d, a, b, SET(10), 0xffff5bb1, 17) STEP(F, b, c, d, a, SET(11), 0x895cd7be, 22) STEP(F, a, b, c, d, SET(12), 0x6b901122, 7) STEP(F, d, a, b, c, SET(13), 0xfd987193, 12) STEP(F, c, d, a, b, SET(14), 0xa679438e, 17) STEP(F, b, c, d, a, SET(15), 0x49b40821, 22) /* Round 2 */ STEP(G, a, b, c, d, GET(1), 0xf61e2562, 5) STEP(G, d, a, b, c, GET(6), 0xc040b340, 9) STEP(G, c, d, a, b, GET(11), 0x265e5a51, 14) STEP(G, b, c, d, a, GET(0), 0xe9b6c7aa, 20) STEP(G, a, b, c, d, GET(5), 0xd62f105d, 5) STEP(G, d, a, b, c, GET(10), 0x02441453, 9) STEP(G, c, d, a, b, GET(15), 0xd8a1e681, 14) STEP(G, b, c, d, a, GET(4), 0xe7d3fbc8, 20) STEP(G, a, b, c, d, GET(9), 0x21e1cde6, 5) STEP(G, d, a, b, c, GET(14), 0xc33707d6, 9) STEP(G, c, d, a, b, GET(3), 0xf4d50d87, 14) STEP(G, b, c, d, a, GET(8), 0x455a14ed, 20) STEP(G, a, b, c, d, GET(13), 0xa9e3e905, 5) STEP(G, d, a, b, c, GET(2), 0xfcefa3f8, 9) STEP(G, c, d, a, b, GET(7), 0x676f02d9, 14) STEP(G, b, c, d, a, GET(12), 0x8d2a4c8a, 20) /* Round 3 */ STEP(H, a, b, c, d, GET(5), 0xfffa3942, 4) STEP(H, d, a, b, c, GET(8), 0x8771f681, 11) STEP(H, c, d, a, b, GET(11), 0x6d9d6122, 16) STEP(H, b, c, d, a, GET(14), 0xfde5380c, 23) STEP(H, a, b, c, d, GET(1), 0xa4beea44, 4) STEP(H, d, a, b, c, GET(4), 0x4bdecfa9, 11) STEP(H, c, d, a, b, GET(7), 0xf6bb4b60, 16) STEP(H, b, c, d, a, GET(10), 0xbebfbc70, 23) STEP(H, a, b, c, d, GET(13), 0x289b7ec6, 4) STEP(H, d, a, b, c, GET(0), 0xeaa127fa, 11) STEP(H, c, d, a, b, GET(3), 0xd4ef3085, 16) STEP(H, b, c, d, a, GET(6), 0x04881d05, 23) STEP(H, a, b, c, d, GET(9), 0xd9d4d039, 4) STEP(H, d, a, b, c, GET(12), 0xe6db99e5, 11) STEP(H, c, d, a, b, GET(15), 0x1fa27cf8, 16) STEP(H, b, c, d, a, GET(2), 0xc4ac5665, 23) /* Round 4 */ STEP(I, a, b, c, d, GET(0), 0xf4292244, 6) STEP(I, d, a, b, c, GET(7), 0x432aff97, 10) STEP(I, c, d, a, b, GET(14), 0xab9423a7, 15) STEP(I, b, c, d, a, GET(5), 0xfc93a039, 21) STEP(I, a, b, c, d, GET(12), 0x655b59c3, 6) STEP(I, d, a, b, c, GET(3), 0x8f0ccc92, 10) STEP(I, c, d, a, b, GET(10), 0xffeff47d, 15) STEP(I, b, c, d, a, GET(1), 0x85845dd1, 21) STEP(I, a, b, c, d, GET(8), 0x6fa87e4f, 6) STEP(I, d, a, b, c, GET(15), 0xfe2ce6e0, 10) STEP(I, c, d, a, b, GET(6), 0xa3014314, 15) STEP(I, b, c, d, a, GET(13), 0x4e0811a1, 21) STEP(I, a, b, c, d, GET(4), 0xf7537e82, 6) STEP(I, d, a, b, c, GET(11), 0xbd3af235, 10) STEP(I, c, d, a, b, GET(2), 0x2ad7d2bb, 15) STEP(I, b, c, d, a, GET(9), 0xeb86d391, 21) a += saved_a; b += saved_b; c += saved_c; d += saved_d; ptr += 64; } while (size -= 64); ctx->a = a; ctx->b = b; ctx->c = c; ctx->d = d; return ptr; } void cbsasl_MD5_Init(MD5_CTX *ctx) { ctx->a = 0x67452301; ctx->b = 0xefcdab89; ctx->c = 0x98badcfe; ctx->d = 0x10325476; ctx->lo = 0; ctx->hi = 0; } void cbsasl_MD5_Update(MD5_CTX *ctx, void *data, unsigned long size) { MD5_u32plus saved_lo; unsigned long used, free; saved_lo = ctx->lo; if ((ctx->lo = (saved_lo + size) & 0x1fffffff) < saved_lo) { ctx->hi++; } ctx->hi += size >> 29; used = saved_lo & 0x3f; if (used) { free = 64 - used; if (size < free) { memcpy(&ctx->buffer[used], data, size); return; } memcpy(&ctx->buffer[used], data, free); data = (unsigned char *)data + free; size -= free; body(ctx, ctx->buffer, 64); } if (size >= 64) { data = body(ctx, data, size & ~(unsigned long)0x3f); size &= 0x3f; } memcpy(ctx->buffer, data, size); } void cbsasl_MD5_Final(unsigned char *result, MD5_CTX *ctx) { unsigned long used, free; used = ctx->lo & 0x3f; ctx->buffer[used++] = 0x80; free = 64 - used; if (free < 8) { memset(&ctx->buffer[used], 0, free); body(ctx, ctx->buffer, 64); used = 0; free = 64; } memset(&ctx->buffer[used], 0, free - 8); ctx->lo <<= 3; ctx->buffer[56] = ctx->lo; ctx->buffer[57] = ctx->lo >> 8; ctx->buffer[58] = ctx->lo >> 16; ctx->buffer[59] = ctx->lo >> 24; ctx->buffer[60] = ctx->hi; ctx->buffer[61] = ctx->hi >> 8; ctx->buffer[62] = ctx->hi >> 16; ctx->buffer[63] = ctx->hi >> 24; body(ctx, ctx->buffer, 64); result[0] = ctx->a; result[1] = ctx->a >> 8; result[2] = ctx->a >> 16; result[3] = ctx->a >> 24; result[4] = ctx->b; result[5] = ctx->b >> 8; result[6] = ctx->b >> 16; result[7] = ctx->b >> 24; result[8] = ctx->c; result[9] = ctx->c >> 8; result[10] = ctx->c >> 16; result[11] = ctx->c >> 24; result[12] = ctx->d; result[13] = ctx->d >> 8; result[14] = ctx->d >> 16; result[15] = ctx->d >> 24; memset(ctx, 0, sizeof(*ctx)); } #endif