h1. Tutorial
h2. Introduction
ActiveLdap is a novel way of interacting with LDAP. Most interaction with
LDAP is done using clunky LDIFs, web interfaces, or with painful APIs that
required a thick reference manual nearby. ActiveLdap aims to fix that.
Inspired by "ActiveRecord":http://activerecord.rubyonrails.org, ActiveLdap provides an
object oriented interface to LDAP entries.
The target audience is system administrators and LDAP users everywhere that
need quick, clean access to LDAP in Ruby.
h3. What's LDAP?
LDAP stands for "Lightweight Directory Access Protocol." Basically this means
that it is the protocol used for accessing LDAP servers. LDAP servers
lightweight directories. An LDAP server can contain anything from a simple
digital phonebook to user accounts for computer systems. More and more
frequently, it is being used for the latter. My examples in this text will
assume some familiarity with using LDAP as a centralized authentication and
authorization server for Unix systems. (Unfortunately, I've yet to try this
against Microsoft's ActiveDirectory, despite what the name implies.)
Further reading:
* "RFC1777":http://www.faqs.org/rfcs/rfc1777.html - Lightweight Directory Access Protocol
* "OpenLDAP":http://www.openldap.org
h3. So why use ActiveLdap?
Using LDAP directly (even with the excellent Ruby/LDAP), leaves you bound to
the world of the predefined LDAP API. While this API is important for many
reasons, having to extract code out of LDAP search blocks and create huge
arrays of LDAP.mod entries make code harder to read, less intuitive, and just
less fun to write. Hopefully, ActiveLdap will remedy all of these
problems!
h2. Getting Started
h3. Requirements
* A Ruby implementation: "Ruby":http://www.ruby-lang.org 1.8.x, 1.9.1 or "JRuby":http://jruby.codehaus.org/
* A LDAP library: "Ruby/LDAP":http://code.google.com/p/ruby-activeldap/wiki/RubyLDAP (for Ruby), "Net::LDAP":http://rubyforge.org/projects/net-ldap/ (for Ruby or JRuby) or JNDI (for JRuby)
* A LDAP server: "OpenLDAP":http://www.openldap.org, etc
** Your LDAP server must allow root_dse queries to allow for schema queries
h3. Installation
Assuming all the requirements are installed, you can install by gem.
!!!plain
# gem install activeldap
Now as a quick test, you can run:
$ irb -rubygems
irb> require 'active_ldap'
=> true
irb> exit
If the require returns false or an exception is raised, there has been a
problem with the installation. You may need to customize what setup.rb does on
install.
h2. Usage
This section covers using ActiveLdap from writing extension classes to
writing applications that use them.
Just to give a taste of what's to come, here is a quick example using irb:
irb> require 'active_ldap'
Call setup_connection method for connect to LDAP server. In this case, LDAP server
is localhost, and base of LDAP tree is "dc=dataspill,dc=org".
irb> ActiveLdap::Base.setup_connection :host => 'localhost', :base => 'dc=dataspill,dc=org'
Here's an extension class that maps to the LDAP Group objects:
irb> class Group < ActiveLdap::Base
irb* ldap_mapping
irb* end
In the above code, Group class handles sub tree of ou=Groups
tha is :base value specified by setup_connection. A instance
of Group class represents a LDAP object under ou=Gruops.
Here is the Group class in use:
# Get all group names
irb> all_groups = Group.find(:all, '*').collect {|group| group.cn}
=> ["root", "daemon", "bin", "sys", "adm", "tty", ..., "develop"]
# Get LDAP objects in develop group
irb> group = Group.find("develop")
=> # ...>
# Get cn of the develop group
irb> group.cn
=> "develop"
# Get gid_number of the develop group
irb> group.gid_number
=> "1003"
That's it! No let's get back in to it.
h3. Extension Classes
Extension classes are classes that are subclassed from ActiveLdap::Base. They
are used to represent objects in your LDAP server abstractly.
h4. Why do I need them?
Extension classes are what make ActiveLdap "active"! They do all the
background work to make easy-to-use objects by mapping the LDAP object's
attributes on to a Ruby class.
h4. Special Methods
I will briefly talk about each of the methods you can use when defining an
extension class. In the above example, I only made one special method call
inside the Group class. More than likely, you will want to more than that.
h5. ldap_mapping
ldap_mapping is the only required method to setup an extension class for use
with ActiveLdap. It must be called inside of a subclass as shown above.
Below is a much more realistic Group class:
class Group < ActiveLdap::Base
ldap_mapping :dn_attribute => 'cn',
:prefix => 'ou=Groups', :classes => ['top', 'posixGroup'],
:scope => :one
end
As you can see, this method is used for defining how this class maps in to LDAP. Let's say that
my LDAP tree looks something like this:
!!!plain
* dc=dataspill,dc=org
|- ou=People,dc=dataspill,dc=org
|+ ou=Groups,dc=dataspill,dc=org
\
|- cn=develop,ou=Groups,dc=dataspill,dc=org
|- cn=root,ou=Groups,dc=dataspill,dc=org
|- ...
Under ou=People I store user objects, and under ou=Groups, I store group
objects. What |ldap_mapping| has done is mapped the class in to the LDAP tree
abstractly. With the given :dn_attributes and :prefix, it will only work for
entries under ou=Groups,dc=dataspill,dc=org using the primary attribute 'cn'
as the beginning of the distinguished name.
Just for clarity, here's how the arguments map out:
!!!plain
cn=develop,ou=Groups,dc=dataspill,dc=org
^^ ^^^^^^^^^ ^^^^^^^^^^^^^^^^^^^
:dn_attribute | |
:prefix |
:base from setup_connection
:scope tells ActiveLdap to only search under ou=Groups, and not to look deeper
for dn_attribute matches.
(e.g. cn=develop,ou=DevGroups,ou=Groups,dc=dataspill,dc=org)
You can choose value from between :sub, :one and :base.
Something's missing: :classes. :classes is used to tell ActiveLdap what
the minimum requirement is when creating a new object. LDAP uses objectClasses
to define what attributes a LDAP object may have. ActiveLdap needs to know
what classes are required when creating a new object. Of course, you can leave
that field out to default to ['top'] only. Then you can let each application
choose what objectClasses their objects should have by calling the method e.g.
Group#add_class(*values).
Note that is can be very important to define the default :classes value. Due to
implementation choices with most LDAP servers, once an object is created, its
structural objectclasses may not be removed (or replaced). Setting a sane default
may help avoid programmer error later.
:classes isn't the only optional argument. If :dn_attribute is left off,
it defaults to super class's value or 'cn'. If :prefix is left off,
it will default to 'ou=PluralizedClassName'. In this
case, it would be 'ou=Groups'.
:classes should be an Array. :dn_attribute should be a String and so should
:prefix.
h5. belongs_to
This method allows an extension class to make use of other extension classes
tying objects together across the LDAP tree. Often, user objects will be
members of, or belong_to, Group objects.
!!!plain
* dc=dataspill,dc=org
|+ ou=People,dc=dataspill,dc=org
\
|- uid=drewry,ou=People,dc=dataspill,dc=org
|- ou=Groups,dc=dataspill,dc=org
In the above tree, one such example would be user 'drewry' who is a part of the
group 'develop'. You can see this by looking at the 'memberUid' field of 'develop'.
irb> develop = Group.find('develop')
=> ...
irb> develop.memberUid
=> ['drewry', 'builder']
If we look at the LDAP entry for 'drewry', we do not see any references to
group 'develop'. In order to remedy that, we can use belongs_to
irb> class User < ActiveLdap::Base
irb* ldap_mapping :dn_attribute => 'uid', :prefix => 'ou=People', :classes => ['top','account']
irb* belongs_to :groups, :class_name => 'Group', :many => 'memberUid', :foreign_key => 'uid'
irb* end
Now, class User will have a method called 'groups' which will retrieve all
Group objects that a user is in.
irb> me = User.find('drewry')
irb> me.groups
=> # # Enumerable object
irb> me.groups.each { |group| p group.cn };nil
"cdrom"
"audio"
"develop"
=> nil
(Note: nil is just there to make the output cleaner...)
TIP: If you weren't sure what the distinguished name attribute was for Group,
you could also do the following:
irb> me.groups.each { |group| p group.id };nil
"cdrom"
"audio"
"develop"
=> nil
Now let's talk about the arguments of belongs_to. We use the following code that extends Group group a bit for explain:
class User < ActiveLdap::Base
ldap_mapping :dn_attribute => 'uid', :prefix => 'People', :classes => ['top','account']
# Associate with primary belonged group
belongs_to :primary_group, :foreign_key => 'gidNumber',
:class_name => 'Group', :primary_key => 'gidNumber'
# Associate with all belonged groups
belongs_to :groups, :foreign_key => 'uid',
:class_name => 'Group', :many => 'memberUid',
end
The first argument is the name of the method you wish to create. In this case, we created a method called primary_group and groups using the symbol :primary_group and :groups. The next collection of arguments are actually a Hash (as with ldap_mapping).
:foreign_key tells belongs_to what attribute Group objects have that match the related object's attribute. If :foreign_key is left off of the argument list, it is assumed to be the dn_attribute.
In the example, uid is used for :foreign_key. It may confuse you.
ActiveLdap uses :foreign_key as "own attribute name". So it
may not be "foreign key". You can consider :foreign_key just
as a relation key.
:primary_key is treated as "related object's attribute name"
as we discussed later.
:class_name should be a string that has the name of a class
you've already included. If your class is inside of a module,
be sure to put the whole name, e.g.
@:class_name => "MyLdapModule::Group"@.
:many and :primary_key are similar. Both of them specifies attribute name of related object specified by :foreign_key. Those values are attribute name that can be used by object of class specified by :class_name.
Relation is resolved by searching entries of :class_name class with :foreign_key attribute value. Search target attribute for it is :primary_key or :many. primary_group method in the above example searches Group objects with User object's gidNumber value as Group object's gidNumber value. Matched Group objects are belonged objects.
:parimary_key is used for an object just belongs to an object. The first matched object is treated as beloned object.
:many is used for an object belongs to many objects. All of matched objects are treated as belonged objects.
In addition, you can do simple membership tests by doing the following:
irb> me.groups.member? 'root'
=> false
irb> me.groups.member? 'develop'
=> true
h5. has_many
This method is the opposite of belongs_to. Instead of checking other objects in
other parts of the LDAP tree to see if you belong to them, you have multiple
objects from other trees listed in your object. To show this, we can just
invert the example from above:
class Group < ActiveLdap::Base
ldap_mapping :dn_attribute => 'cn', :prefix => 'ou=Groups', :classes => ['top', 'posixGroup']
# Associate with primary belonged users
has_many :primary_members, :foreign_key => 'gidNumber',
:class_name => "User", :primary_key => 'gidNumber'
# Associate with all belonged users
has_many :members, :wrap => "memberUid",
:class_name => "User", :primary_key => 'uid'
end
Now we can see that group develop has user 'drewry' as a member, and it can
even return all responses in object form just like belongs_to methods.
irb> develop = Group.find('develop')
=> ...
irb> develop.members
=> # # Enumerable object
irb> develop.members.map{|member| member.id}
=> ["drewry", "builder"]
The arguments for has_many follow the exact same idea that belongs_to's
arguments followed. :wrap's contents are used to search for matching
:primary_key content. If :primary_key is not specified, it defaults to the
dn_attribute of the specified :class_name.
h3. Using these new classes
These new classes have many method calls. Many of them are automatically
generated to provide access to the LDAP object's attributes. Other were defined
during class creation by special methods like belongs_to. There are a few other
methods that do not fall in to these categories.
h4. .find
.find is a class method that is accessible from
any subclass of Base that has 'ldap_mapping' called. When
called .first(:first) returns the first match of the given class.
irb> Group.find(:first, 'deve*").cn
=> "develop"
In this simple example, Group.find took the search string of 'deve*' and
searched for the first match in Group where the dn_attribute matched the
query. This is the simplest example of .find.
irb> Group.find(:all).collect {|group| group.cn}
=> ["root", "daemon", "bin", "sys", "adm", "tty", ..., "develop"]
Here .find(:all) returns all matches to the same query. Both .find(:first) and
.find(:all) also can take more expressive arguments:
irb> Group.find(:all, :attribute => 'gidNumber', :value => '1003').collect {|group| group.cn}
=> ["develop"]
So it is pretty clear what :attribute and :value do - they are used to query as
:attribute=:value.
If :attribute is unspecified, it defaults to the dn_attribute.
It is also possible to override :attribute and :value by specifying :filter. This
argument allows the direct specification of a LDAP filter to retrieve objects by.
h4. .search
.search is a class method that is accessible from any subclass of Base, and Base.
It lets the user perform an arbitrary search against the current LDAP connection
irrespetive of LDAP mapping data. This is meant to be useful as a utility method
to cover 80% of the cases where a user would want to use Base.connection directly.
irb> Base.search(:base => 'dc=example,dc=com', :filter => '(uid=roo*)',
:scope => :sub, :attributes => ['uid', 'cn'])
=> [["uid=root,ou=People,dc=dataspill,dc=org",{"cn"=>["root"], "uidNumber"=>["0"]}]
You can specify the :filter, :base, :scope, and :attributes, but they all have defaults --
* :filter defaults to objectClass=* - usually this isn't what you want
* :base defaults to the base of the class this is executed from (as set in ldap_mapping)
* :scope defaults to :sub. Usually you won't need to change it (You can choose value also from between :one and :base)
* :attributes defaults to [] and is the list of attributes you want back. Empty means all of them.
h4. #valid?
valid? is a method that verifies that all attributes that are required by the
objects current objectClasses are populated.
h4. #save
save is a method that writes any changes to an object back to the LDAP server.
It automatically handles the addition of new objects, and the modification of
existing ones.
h4. .exists?
exists? is a simple method which returns true is the current object exists in
LDAP, or false if it does not.
irb> User.exists?("dshadsadsa")
=> false
h3. ActiveLdap::Base
ActiveLdap::Base has come up a number of times in the examples above. Every
time, it was being used as the super class for the wrapper objects. While this
is it's main purpose, it also handles quite a bit more in the background.
h4. What is it?
ActiveLdap::Base is the heart of ActiveLdap. It does all the schema
parsing for validation and attribute-to-method mangling as well as manage the
connection to LDAP.
h5. setup_connection
Base.setup_connection takes many (optional) arguments and is used to
connect to the LDAP server. Sometimes you will want to connect anonymously
and other times over TLS with user credentials. Base.setup_connection is
here to do all of that for you.
By default, if you call any subclass of Base, such as Group, it will call
Base.setup_connection() if these is no active LDAP connection. If your
server allows anonymous binding, and you only want to access data in a
read-only fashion, you won't need to call Base.setup_connection. Here
is a fully parameterized call:
Base.setup_connection(
:host => 'ldap.dataspill.org',
:port => 389,
:base => 'dc=dataspill,dc=org',
:logger => logger_object,
:bind_dn => "uid=drewry,ou=People,dc=dataspill,dc=org",
:password_block => Proc.new { 'password12345' },
:allow_anonymous => false,
:try_sasl => false
)
There are quite a few arguments, but luckily many of them have safe defaults:
* :host defaults to "127.0.0.1".
* :port defaults to nil. 389 is applied if not specified.
* :bind_dn defaults to nil. anonymous binding is applied if not specified.
* :logger defaults to a Logger object that prints fatal messages to stderr
* :password_block defaults to nil
* :allow_anonymous defaults to true
* :try_sasl defaults to false - see Advanced Topics for more on this one.
Most of these are obvious, but I'll step through them for completeness:
* :host defines the LDAP server hostname to connect to.
* :port defines the LDAP server port to connect to.
* :method defines the type of connection - :tls, :ssl, :plain
* :base specifies the LDAP search base to use with the prefixes defined in all
subclasses.
* :bind_dn specifies what your server expects when attempting to bind with
credentials.
* :logger accepts a custom logger object to integrate with any other logging
your application uses.
* :password_block, if defined, give the Proc block for acquiring the password
* :password, if defined, give the user's password as a String
* :store_password indicates whether the password should be stored, or if used
whether the :password_block should be called on each reconnect.
* :allow_anonymous determines whether anonymous binding is allowed if other
bind methods fail
* :try_sasl, when true, tells ActiveLdap to attempt a SASL-GSSAPI bind
* :sasl_quiet, when true, tells the SASL libraries to not spew messages to STDOUT
* :sasl_options, if defined, should be a hash of options to pass through. This currently only works with the ruby-ldap adapter, which currently only supports :realm, :authcid, and :authzid.
* :retry_limit - indicates the number of attempts to reconnect that will be undertaken when a stale connection occurs. -1 means infinite.
* :retry_wait - seconds to wait before retrying a connection
* :scope - dictates how to find objects. (Default: :one)
* :timeout - time in seconds - defaults to disabled. This CAN interrupt search() requests. Be warned.
* :retry_on_timeout - whether to reconnect when timeouts occur. Defaults to true
See lib/configuration.rb(ActiveLdap::Configuration::DEFAULT_CONFIG) for defaults for each option
Base.setup_connection just setups connection
configuration. A connection is connected and bound when it
is needed. It follows roughly the following approach:
* Connect to host:port using :method
* If bind_dn and password_block/password, attempt to bind with credentials.
* If that fails or no password_block and anonymous allowed, attempt to bind
anonymously.
* If that fails, error out.
On connect, the configuration options passed in are stored
in an internal class variable which is used to cache the
information without ditching the defaults passed in from
configuration.rb
h5. connection
Base.connection returns the ActiveLdap::Connection object.
h3. Exceptions
There are a few custom exceptions used in ActiveLdap. They are detailed below.
h4. DeleteError
This exception is raised when #delete fails. It will include LDAP error
information that was passed up during the error.
h4. SaveError
This exception is raised when there is a problem in #save updating or creating
an LDAP entry. Often the error messages are cryptic. Looking at the server
logs or doing an "Wireshark":http://www.wireshark.org dump of the connection will
often provide better insight.
h4. AuthenticationError
This exception is raised during Base.setup_connection if no valid authentication methods
succeeded.
h4. ConnectionError
This exception is raised during Base.setup_connection if no valid
connection to the LDAP server could be created. Check you
Base.setup_connection arguments, and network connectivity! Also check
your LDAP server logs to see if it ever saw the request.
h4. ObjectClassError
This exception is raised when an object class is used that is not defined
in the schema.
h3. Others
Other exceptions may be raised by the Ruby/LDAP module, or by other subsystems.
If you get one of these exceptions and think it should be wrapped, write me an
email and let me know where it is and what you expected. For faster results,
email a patch!
h3. Putting it all together
Now that all of the components of ActiveLdap have been covered, it's time
to put it all together! The rest of this section will show the steps to setup
example user and group management scripts for use with the LDAP tree described
above.
All of the scripts here are in the package's examples/ directory.
h4. Setting up
Create directory for scripts.
!!!plain
% mkdir -p ldapadmin/objects
In ldapadmin/objects/ create the file user.rb:
require 'objects/group'
class User < ActiveLdap::Base
ldap_mapping :dn_attribute => 'uid', :prefix => 'ou=People', :classes => ['person', 'posixAccount']
belongs_to :groups, :class_name => 'Group', :many => 'memberUid'
end
In ldapadmin/objects/ create the file group.rb:
class Group < ActiveLdap::Base
ldap_mapping :classes => ['top', 'posixGroup'], :prefix => 'ou=Groups'
has_many :members, :class_name => "User", :wrap => "memberUid"
has_many :primary_members, :class_name => 'User', :foreign_key => 'gidNumber', :primary_key => 'gidNumber'
end
Now, we can write some small scripts to do simple management tasks.
h4. Creating LDAP entries
Now let's create a really dumb script for adding users - ldapadmin/useradd:
#!/usr/bin/ruby -W0
base = File.expand_path(File.join(File.dirname(__FILE__), ".."))
$LOAD_PATH << File.join(base, "lib")
$LOAD_PATH << File.join(base, "examples")
require 'rubygems'
require 'active_ldap'
require 'objects/user'
require 'objects/group'
argv, opts, options = ActiveLdap::Command.parse_options do |opts, options|
opts.banner += " USER_NAME CN UID"
end
if argv.size == 3
name, cn, uid = argv
else
$stderr.puts opts
exit 1
end
pwb = Proc.new do |user|
ActiveLdap::Command.read_password("[#{user}] Password: ")
end
ActiveLdap::Base.setup_connection(:password_block => pwb,
:allow_anonymous => false)
if User.exists?(name)
$stderr.puts("User #{name} already exists.")
exit 1
end
user = User.new(name)
user.add_class('shadowAccount')
user.cn = cn
user.uid_number = uid
user.gid_number = uid
user.home_directory = "/home/#{name}"
user.sn = "somesn"
unless user.save
puts "failed"
puts user.errors.full_messages
exit 1
end
h4. Managing LDAP entries
Now let's create another dumb script for modifying users - ldapadmin/usermod:
#!/usr/bin/ruby -W0
base = File.expand_path(File.join(File.dirname(__FILE__), ".."))
$LOAD_PATH << File.join(base, "lib")
$LOAD_PATH << File.join(base, "examples")
require 'rubygems'
require 'active_ldap'
require 'objects/user'
require 'objects/group'
argv, opts, options = ActiveLdap::Command.parse_options do |opts, options|
opts.banner += " USER_NAME CN UID"
end
if argv.size == 3
name, cn, uid = argv
else
$stderr.puts opts
exit 1
end
pwb = Proc.new do |user|
ActiveLdap::Command.read_password("[#{user}] Password: ")
end
ActiveLdap::Base.setup_connection(:password_block => pwb,
:allow_anonymous => false)
unless User.exists?(name)
$stderr.puts("User #{name} doesn't exist.")
exit 1
end
user = User.find(name)
user.cn = cn
user.uid_number = uid
user.gid_number = uid
unless user.save
puts "failed"
puts user.errors.full_messages
exit 1
end
h4. Removing LDAP entries
Now let's create more one for deleting users - ldapadmin/userdel:
#!/usr/bin/ruby -W0
base = File.expand_path(File.join(File.dirname(__FILE__), ".."))
$LOAD_PATH << File.join(base, "lib")
$LOAD_PATH << File.join(base, "examples")
require 'rubygems'
require 'active_ldap'
require 'objects/user'
require 'objects/group'
argv, opts, options = ActiveLdap::Command.parse_options do |opts, options|
opts.banner += " USER_NAME"
end
if argv.size == 1
name = argv.shift
else
$stderr.puts opts
exit 1
end
pwb = Proc.new do |user|
ActiveLdap::Command.read_password("[#{user}] Password: ")
end
ActiveLdap::Base.setup_connection(:password_block => pwb,
:allow_anonymous => false)
unless User.exists?(name)
$stderr.puts("User #{name} doesn't exist.")
exit 1
end
User.destroy(name)
h3. Advanced Topics
Below are some situation tips and tricks to get the most out of ActiveLdap.
h4. Binary data and other subtypes
Sometimes, you may want to store attributes with language specifiers, or
perhaps in binary form. This is (finally!) fully supported. To do so,
follow the examples below:
irb> user = User.new('drewry')
=> ...
# This adds a cn entry in lang-en and whatever the server default is.
irb> user.cn = [ 'wad', {'lang-en' => ['wad', 'Will Drewry']} ]
=> ...
irb> user.cn
=> ["wad", {"lang-en-us" => ["wad", "Will Drewry"]}]
# Now let's add a binary X.509 certificate (assume objectClass is correct)
irb> user.user_certificate = File.read('example.der')
=> ...
irb> user.save
So that's a lot to take in. Here's what is going on. I just set the LDAP
object's cn to "wad" and cn:lang-en-us to ["wad", "Will Drewry"].
Anytime a LDAP subtype is required, you must encapsulate the data in a Hash.
But wait a minute, I just read in a binary certificate without wrapping it up.
So any binary attribute _that requires ;binary subtyping_ will automagically
get wrapped in @{'binary' => value}@ if you don't do it. This keeps your #writes
from breaking, and my code from crying. For correctness, I could have easily
done the following:
irb> user.user_certificate = {'binary' => File.read('example.der')}
You should note that some binary data does not use the binary subtype all the time.
One example is jpegPhoto. You can use it as jpegPhoto;binary or just as jpegPhoto.
Since the schema dictates that it is a binary value, ActiveLdap will write
it as binary, but the subtype will not be automatically appended as above. The
use of the subtype on attributes like jpegPhoto is ultimately decided by the
LDAP site policy and not by any programmatic means.
The only subtypes defined in LDAPv3 are lang-* and binary. These can be nested
though:
irb> user.cn = [{'lang-ja' => {'binary' => 'some Japanese'}}]
As I understand it, OpenLDAP does not support nested subtypes, but some
documentation I've read suggests that Netscape's LDAP server does. I only
have access to OpenLDAP. If anyone tests this out, please let me know how it
goes!
And that pretty much wraps up this section.
h4. Further integration with your environment aka namespacing
If you want this to cleanly integrate into your system-wide Ruby include path,
you should put your extension classes inside a custom module.
Example:
./myldap.rb:
require 'active_ldap'
require 'myldap/user'
require 'myldap/group'
module MyLDAP
end
./myldap/user.rb:
module MyLDAP
class User < ActiveLdap::Base
ldap_mapping :dn_attribute => 'uid', :prefix => 'ou=People', :classes => ['top', 'account', 'posixAccount']
belongs_to :groups, :class_name => 'MyLDAP::Group', :many => 'memberUid'
end
end
./myldap/group.rb:
module MyLDAP
class Group < ActiveLdap::Base
ldap_mapping :classes => ['top', 'posixGroup'], :prefix => 'ou=Groups'
has_many :members, :class_name => 'MyLDAP::User', :wrap => 'memberUid'
has_many :primary_members, :class_name => 'MyLDAP::User', :foreign_key => 'gidNumber', :primary_key => 'gidNumber'
end
end
Now in your local applications, you can call
require 'myldap'
MyLDAP::Group.new('foo')
...
and everything should work well.
h4. force array results for single values
Even though ActiveLdap attempts to maintain programmatic ease by
returning Array values only. By specifying 'true' as an argument to
any attribute method you will get back a Array if it is single value.
Here's an example:
irb> user = User.new('drewry')
=> ...
irb> user.cn(true)
=> ["Will Drewry"]
h4. Dynamic attribute crawling
If you use tab completion in irb, you'll notice that you /can/ tab complete the dynamic
attribute methods. You can still see which methods are for attributes using
Base#attribute_names:
irb> d = Group.new('develop')
=> ...
irb> d.attribute_names
=> ["gidNumber", "cn", "memberUid", "commonName", "description", "userPassword", "objectClass"]
h4. Juggling multiple LDAP connections
In the same vein as the last tip, you can use multiple LDAP connections by
per class as follows:
irb> anon_class = Class.new(Base)
=> ...
irb> anon_class.setup_connection
=> ...
irb> auth_class = Class.new(Base)
=> ...
irb> auth_class.setup_connection(:password_block => lambda{'mypass'})
=> ...
This can be useful for doing authentication tests and other such tricks.
h4. :try_sasl
If you have the Ruby/LDAP package with the SASL/GSSAPI patch from Ian
MacDonald's web site, you can use Kerberos to bind to your LDAP server. By
default, :try_sasl is false.
Also note that you must be using OpenLDAP 2.1.29 or higher to use SASL/GSSAPI
due to some bugs in older versions of OpenLDAP.
h4. Don't be afraid! [Internals]
Don't be afraid to add more methods to the extensions classes and to
experiment. That's exactly how I ended up with this package. If you come up
with something cool, please share it!
The internal structure of ActiveLdap::Base, and thus all its subclasses, is
still in flux. I've tried to minimize the changes to the overall API, but
the internals are still rough around the edges.
h5. Where's ldap_mapping data stored? How can I get to it?
When you call ldap_mapping, it overwrites several class methods inherited
from Base:
* Base.base()
* Base.required_classes()
* Base.dn_attribute()
You can access these from custom class methods by calling MyClass.base(),
or whatever. There are predefined instance methods for getting to these
from any new instance methods you define:
* Base#base()
* Base#required_classes()
* Base#dn_attribute()
h5. What else?
Well if you want to use the LDAP connection for anything, I'd suggest still
calling Base.connection to get it. There really aren't many other internals
that need to be worried about. You could get the LDAP schema with
Base.schema.
The only other useful tricks are dereferencing and accessing the stored
data. Since LDAP attributes can have multiple names, e.g. cn or commonName,
any methods you write might need to figure it out. I'd suggest just
calling self[attribname] to get the value, but if that's not good enough,
you can call look up the stored name by #to_real_attribute_name as follows:
irb> User.find(:first).instance_eval do
irb> to_real_attribute_name('commonName')
irb> end
=> 'cn'
This tells you the name the attribute is stored in behind the scenes (@data).
Again, self[attribname] should be enough for most extensions, but if not,
it's probably safe to dabble here.
Also, if you like to look up all aliases for an attribute, you can call the
following:
irb> User.schema.attribute_type 'cn', 'NAME'
=> ["cn", "commonName"]
This is discovered automagically from the LDAP server's schema.
h2. Limitations
h3. Speed
Currently, ActiveLdap could be faster. I have some recursive type
checking going on which slows object creation down, and I'm sure there
are many, many other places optimizations can be done. Feel free
to send patches, or just hang in there until I can optimize away the
slowness.
h2. Feedback
Any and all feedback and patches are welcome. I am very excited about this
package, and I'd like to see it prove helpful to more people than just myself.