# frozen_string_literal: true
# Copyright (c) 2017-2018 THL A29 Limited, a Tencent company. All Rights Reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
module TencentCloud
module Tcss
module V20201101
# 容器运行时安全，子策略信息
class AbnormalProcessChildRuleInfo < TencentCloud::Common::AbstractModel
# @param RuleMode: 策略模式， RULE_MODE_RELEASE: 放行
# RULE_MODE_ALERT: 告警
# RULE_MODE_HOLDUP:拦截
# @type RuleMode: String
# @param ProcessPath: 进程路径
# @type ProcessPath: String
# @param RuleId: 子策略id
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RuleId: String
# @param RuleLevel: 威胁等级，HIGH:高，MIDDLE:中，LOW:低
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RuleLevel: String
attr_accessor :RuleMode, :ProcessPath, :RuleId, :RuleLevel
def initialize(rulemode=nil, processpath=nil, ruleid=nil, rulelevel=nil)
@RuleMode = rulemode
@ProcessPath = processpath
@RuleId = ruleid
@RuleLevel = rulelevel
end
def deserialize(params)
@RuleMode = params['RuleMode']
@ProcessPath = params['ProcessPath']
@RuleId = params['RuleId']
@RuleLevel = params['RuleLevel']
end
end
# 运行时容器访问控制事件描述信息
class AbnormalProcessEventDescription < TencentCloud::Common::AbstractModel
# @param Description: 事件规则
# @type Description: String
# @param Solution: 解决方案
# @type Solution: String
# @param Remark: 事件备注信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Remark: String
# @param MatchRule: 命中规则详细信息
# @type MatchRule: :class:`Tencentcloud::Tcss.v20201101.models.AbnormalProcessChildRuleInfo`
# @param RuleName: 命中规则名称，PROXY_TOOL：代理软件，TRANSFER_CONTROL：横向渗透，ATTACK_CMD：恶意命令，REVERSE_SHELL：反弹shell，FILELESS：无文件程序执行，RISK_CMD：高危命令，ABNORMAL_CHILD_PROC：敏感服务异常子进程启动，USER_DEFINED_RULE：用户自定义规则
# @type RuleName: String
# @param RuleId: 命中规则的id
# @type RuleId: String
# @param OperationTime: 事件最后一次处理的时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type OperationTime: String
# @param GroupName: 命中策略名称：SYSTEM_DEFINED_RULE （系统策略）或 用户自定义的策略名字
# 注意：此字段可能返回 null，表示取不到有效值。
# @type GroupName: String
attr_accessor :Description, :Solution, :Remark, :MatchRule, :RuleName, :RuleId, :OperationTime, :GroupName
def initialize(description=nil, solution=nil, remark=nil, matchrule=nil, rulename=nil, ruleid=nil, operationtime=nil, groupname=nil)
@Description = description
@Solution = solution
@Remark = remark
@MatchRule = matchrule
@RuleName = rulename
@RuleId = ruleid
@OperationTime = operationtime
@GroupName = groupname
end
def deserialize(params)
@Description = params['Description']
@Solution = params['Solution']
@Remark = params['Remark']
unless params['MatchRule'].nil?
@MatchRule = AbnormalProcessChildRuleInfo.new
@MatchRule.deserialize(params['MatchRule'])
end
@RuleName = params['RuleName']
@RuleId = params['RuleId']
@OperationTime = params['OperationTime']
@GroupName = params['GroupName']
end
end
# 容器运行时安全异常进程信息
class AbnormalProcessEventInfo < TencentCloud::Common::AbstractModel
# @param ProcessPath: 进程目录
# @type ProcessPath: String
# @param EventType: 事件类型，MALICE_PROCESS_START:恶意进程启动
# @type EventType: String
# @param MatchRuleName: 命中规则名称，PROXY_TOOL：代理软件，TRANSFER_CONTROL：横向渗透，ATTACK_CMD：恶意命令，REVERSE_SHELL：反弹shell，FILELESS：无文件程序执行，RISK_CMD：高危命令，ABNORMAL_CHILD_PROC：敏感服务异常子进程启动，USER_DEFINED_RULE：用户自定义规则
# @type MatchRuleName: String
# @param FoundTime: 生成时间
# @type FoundTime: String
# @param ContainerName: 容器名
# @type ContainerName: String
# @param ImageName: 镜像名
# @type ImageName: String
# @param Behavior: 动作执行结果， BEHAVIOR_NONE: 无
# BEHAVIOR_ALERT: 告警
# BEHAVIOR_RELEASE：放行
# BEHAVIOR_HOLDUP_FAILED:拦截失败
# BEHAVIOR_HOLDUP_SUCCESSED：拦截失败
# @type Behavior: String
# @param Status: 状态，EVENT_UNDEAL:事件未处理
# EVENT_DEALED:事件已经处理
# EVENT_INGNORE：事件已经忽略
# @type Status: String
# @param Id: 事件记录的唯一id
# @type Id: String
# @param ImageId: 镜像id，用于跳转
# @type ImageId: String
# @param ContainerId: 容器id，用于跳转
# @type ContainerId: String
# @param Solution: 事件解决方案
# @type Solution: String
# @param Description: 事件详细描述
# @type Description: String
# @param MatchRuleId: 命中策略id
# @type MatchRuleId: String
# @param MatchAction: 命中规则行为：
# RULE_MODE_RELEASE 放行
# RULE_MODE_ALERT 告警
# RULE_MODE_HOLDUP 拦截
# @type MatchAction: String
# @param MatchProcessPath: 命中规则进程信息
# @type MatchProcessPath: String
# @param RuleExist: 规则是否存在
# @type RuleExist: Boolean
# @param EventCount: 事件数量
# @type EventCount: Integer
# @param LatestFoundTime: 最近生成时间
# @type LatestFoundTime: String
# @param RuleId: 规则组Id
# @type RuleId: String
# @param MatchGroupName: 命中策略名称：SYSTEM_DEFINED_RULE （系统策略）或 用户自定义的策略名字
# @type MatchGroupName: String
# @param MatchRuleLevel: 命中规则等级，HIGH：高危，MIDDLE：中危，LOW：低危。
# @type MatchRuleLevel: String
attr_accessor :ProcessPath, :EventType, :MatchRuleName, :FoundTime, :ContainerName, :ImageName, :Behavior, :Status, :Id, :ImageId, :ContainerId, :Solution, :Description, :MatchRuleId, :MatchAction, :MatchProcessPath, :RuleExist, :EventCount, :LatestFoundTime, :RuleId, :MatchGroupName, :MatchRuleLevel
def initialize(processpath=nil, eventtype=nil, matchrulename=nil, foundtime=nil, containername=nil, imagename=nil, behavior=nil, status=nil, id=nil, imageid=nil, containerid=nil, solution=nil, description=nil, matchruleid=nil, matchaction=nil, matchprocesspath=nil, ruleexist=nil, eventcount=nil, latestfoundtime=nil, ruleid=nil, matchgroupname=nil, matchrulelevel=nil)
@ProcessPath = processpath
@EventType = eventtype
@MatchRuleName = matchrulename
@FoundTime = foundtime
@ContainerName = containername
@ImageName = imagename
@Behavior = behavior
@Status = status
@Id = id
@ImageId = imageid
@ContainerId = containerid
@Solution = solution
@Description = description
@MatchRuleId = matchruleid
@MatchAction = matchaction
@MatchProcessPath = matchprocesspath
@RuleExist = ruleexist
@EventCount = eventcount
@LatestFoundTime = latestfoundtime
@RuleId = ruleid
@MatchGroupName = matchgroupname
@MatchRuleLevel = matchrulelevel
end
def deserialize(params)
@ProcessPath = params['ProcessPath']
@EventType = params['EventType']
@MatchRuleName = params['MatchRuleName']
@FoundTime = params['FoundTime']
@ContainerName = params['ContainerName']
@ImageName = params['ImageName']
@Behavior = params['Behavior']
@Status = params['Status']
@Id = params['Id']
@ImageId = params['ImageId']
@ContainerId = params['ContainerId']
@Solution = params['Solution']
@Description = params['Description']
@MatchRuleId = params['MatchRuleId']
@MatchAction = params['MatchAction']
@MatchProcessPath = params['MatchProcessPath']
@RuleExist = params['RuleExist']
@EventCount = params['EventCount']
@LatestFoundTime = params['LatestFoundTime']
@RuleId = params['RuleId']
@MatchGroupName = params['MatchGroupName']
@MatchRuleLevel = params['MatchRuleLevel']
end
end
# 运行时安全，异常进程检测策略
class AbnormalProcessRuleInfo < TencentCloud::Common::AbstractModel
# @param IsEnable: true:策略启用，false:策略禁用
# @type IsEnable: Boolean
# @param ImageIds: 生效镜像id，空数组代表全部镜像
# @type ImageIds: Array
# @param ChildRules: 用户策略的子策略数组
# @type ChildRules: Array
# @param RuleName: 策略名字
# @type RuleName: String
# @param RuleId: 策略id
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RuleId: String
# @param SystemChildRules: 系统策略的子策略数组
# @type SystemChildRules: Array
# @param IsDefault: 是否是系统默认策略
# @type IsDefault: Boolean
attr_accessor :IsEnable, :ImageIds, :ChildRules, :RuleName, :RuleId, :SystemChildRules, :IsDefault
def initialize(isenable=nil, imageids=nil, childrules=nil, rulename=nil, ruleid=nil, systemchildrules=nil, isdefault=nil)
@IsEnable = isenable
@ImageIds = imageids
@ChildRules = childrules
@RuleName = rulename
@RuleId = ruleid
@SystemChildRules = systemchildrules
@IsDefault = isdefault
end
def deserialize(params)
@IsEnable = params['IsEnable']
@ImageIds = params['ImageIds']
unless params['ChildRules'].nil?
@ChildRules = []
params['ChildRules'].each do |i|
abnormalprocesschildruleinfo_tmp = AbnormalProcessChildRuleInfo.new
abnormalprocesschildruleinfo_tmp.deserialize(i)
@ChildRules << abnormalprocesschildruleinfo_tmp
end
end
@RuleName = params['RuleName']
@RuleId = params['RuleId']
unless params['SystemChildRules'].nil?
@SystemChildRules = []
params['SystemChildRules'].each do |i|
abnormalprocesssystemchildruleinfo_tmp = AbnormalProcessSystemChildRuleInfo.new
abnormalprocesssystemchildruleinfo_tmp.deserialize(i)
@SystemChildRules << abnormalprocesssystemchildruleinfo_tmp
end
end
@IsDefault = params['IsDefault']
end
end
# 异常进程系统策略的子策略信息
class AbnormalProcessSystemChildRuleInfo < TencentCloud::Common::AbstractModel
# @param RuleId: 子策略Id
# @type RuleId: String
# @param IsEnable: 子策略状态，true为开启，false为关闭
# @type IsEnable: Boolean
# @param RuleMode: 策略模式, RULE_MODE_RELEASE: 放行
# RULE_MODE_ALERT: 告警
# RULE_MODE_HOLDUP:拦截
# @type RuleMode: String
# @param RuleType: 子策略检测的行为类型
# PROXY_TOOL： 代理软件
# TRANSFER_CONTROL：横向渗透
# ATTACK_CMD： 恶意命令
# REVERSE_SHELL：反弹shell
# FILELESS：无文件程序执行
# RISK_CMD：高危命令
# ABNORMAL_CHILD_PROC: 敏感服务异常子进程启动
# @type RuleType: String
# @param RuleLevel: 威胁等级，HIGH:高，MIDDLE:中，LOW:低
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RuleLevel: String
attr_accessor :RuleId, :IsEnable, :RuleMode, :RuleType, :RuleLevel
def initialize(ruleid=nil, isenable=nil, rulemode=nil, ruletype=nil, rulelevel=nil)
@RuleId = ruleid
@IsEnable = isenable
@RuleMode = rulemode
@RuleType = ruletype
@RuleLevel = rulelevel
end
def deserialize(params)
@RuleId = params['RuleId']
@IsEnable = params['IsEnable']
@RuleMode = params['RuleMode']
@RuleType = params['RuleType']
@RuleLevel = params['RuleLevel']
end
end
# 容器运行时安全，访问控制子策略信息
class AccessControlChildRuleInfo < TencentCloud::Common::AbstractModel
# @param RuleMode: 策略模式, RULE_MODE_RELEASE: 放行
# RULE_MODE_ALERT: 告警
# RULE_MODE_HOLDUP:拦截
# @type RuleMode: String
# @param ProcessPath: 进程路径
# @type ProcessPath: String
# @param TargetFilePath: 被访问文件路径，仅仅在访问控制生效
# @type TargetFilePath: String
# @param RuleId: 子策略id
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RuleId: String
attr_accessor :RuleMode, :ProcessPath, :TargetFilePath, :RuleId
def initialize(rulemode=nil, processpath=nil, targetfilepath=nil, ruleid=nil)
@RuleMode = rulemode
@ProcessPath = processpath
@TargetFilePath = targetfilepath
@RuleId = ruleid
end
def deserialize(params)
@RuleMode = params['RuleMode']
@ProcessPath = params['ProcessPath']
@TargetFilePath = params['TargetFilePath']
@RuleId = params['RuleId']
end
end
# 运行时容器访问控制事件描述信息
class AccessControlEventDescription < TencentCloud::Common::AbstractModel
# @param Description: 事件规则
# @type Description: String
# @param Solution: 解决方案
# @type Solution: String
# @param Remark: 事件备注信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Remark: String
# @param MatchRule: 命中规则详细信息
# @type MatchRule: :class:`Tencentcloud::Tcss.v20201101.models.AccessControlChildRuleInfo`
# @param RuleName: 命中规则名字
# @type RuleName: String
# @param RuleId: 命中规则id
# @type RuleId: String
# @param OperationTime: 事件最后一次处理的时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type OperationTime: String
attr_accessor :Description, :Solution, :Remark, :MatchRule, :RuleName, :RuleId, :OperationTime
def initialize(description=nil, solution=nil, remark=nil, matchrule=nil, rulename=nil, ruleid=nil, operationtime=nil)
@Description = description
@Solution = solution
@Remark = remark
@MatchRule = matchrule
@RuleName = rulename
@RuleId = ruleid
@OperationTime = operationtime
end
def deserialize(params)
@Description = params['Description']
@Solution = params['Solution']
@Remark = params['Remark']
unless params['MatchRule'].nil?
@MatchRule = AccessControlChildRuleInfo.new
@MatchRule.deserialize(params['MatchRule'])
end
@RuleName = params['RuleName']
@RuleId = params['RuleId']
@OperationTime = params['OperationTime']
end
end
# 容器运行时安全访问控制事件信息
class AccessControlEventInfo < TencentCloud::Common::AbstractModel
# @param ProcessName: 进程名称
# @type ProcessName: String
# @param MatchRuleName: 命中规则名称
# @type MatchRuleName: String
# @param FoundTime: 生成时间
# @type FoundTime: String
# @param ContainerName: 容器名
# @type ContainerName: String
# @param ImageName: 镜像名
# @type ImageName: String
# @param Behavior: 动作执行结果， BEHAVIOR_NONE: 无
# BEHAVIOR_ALERT: 告警
# BEHAVIOR_RELEASE：放行
# BEHAVIOR_HOLDUP_FAILED:拦截失败
# BEHAVIOR_HOLDUP_SUCCESSED：拦截失败
# @type Behavior: String
# @param Status: 状态0:未处理 “EVENT_UNDEAL”:事件未处理
# "EVENT_DEALED":事件已经处理
# "EVENT_INGNORE"：事件已经忽略
# @type Status: String
# @param Id: 事件记录的唯一id
# @type Id: String
# @param FileName: 文件名称
# @type FileName: String
# @param EventType: 事件类型， FILE_ABNORMAL_READ:文件异常读取
# @type EventType: String
# @param ImageId: 镜像id, 用于跳转
# @type ImageId: String
# @param ContainerId: 容器id, 用于跳转
# @type ContainerId: String
# @param Solution: 事件解决方案
# @type Solution: String
# @param Description: 事件详细描述
# @type Description: String
# @param MatchRuleId: 命中策略id
# @type MatchRuleId: String
# @param MatchAction: 命中规则行为：
# RULE_MODE_RELEASE 放行
# RULE_MODE_ALERT 告警
# RULE_MODE_HOLDUP 拦截
# @type MatchAction: String
# @param MatchProcessPath: 命中规则进程信息
# @type MatchProcessPath: String
# @param MatchFilePath: 命中规则文件信息
# @type MatchFilePath: String
# @param FilePath: 文件路径，包含名字
# @type FilePath: String
# @param RuleExist: 规则是否存在
# @type RuleExist: Boolean
# @param EventCount: 事件数量
# @type EventCount: Integer
# @param LatestFoundTime: 最近生成时间
# @type LatestFoundTime: String
# @param RuleId: 规则组id
# @type RuleId: String
attr_accessor :ProcessName, :MatchRuleName, :FoundTime, :ContainerName, :ImageName, :Behavior, :Status, :Id, :FileName, :EventType, :ImageId, :ContainerId, :Solution, :Description, :MatchRuleId, :MatchAction, :MatchProcessPath, :MatchFilePath, :FilePath, :RuleExist, :EventCount, :LatestFoundTime, :RuleId
def initialize(processname=nil, matchrulename=nil, foundtime=nil, containername=nil, imagename=nil, behavior=nil, status=nil, id=nil, filename=nil, eventtype=nil, imageid=nil, containerid=nil, solution=nil, description=nil, matchruleid=nil, matchaction=nil, matchprocesspath=nil, matchfilepath=nil, filepath=nil, ruleexist=nil, eventcount=nil, latestfoundtime=nil, ruleid=nil)
@ProcessName = processname
@MatchRuleName = matchrulename
@FoundTime = foundtime
@ContainerName = containername
@ImageName = imagename
@Behavior = behavior
@Status = status
@Id = id
@FileName = filename
@EventType = eventtype
@ImageId = imageid
@ContainerId = containerid
@Solution = solution
@Description = description
@MatchRuleId = matchruleid
@MatchAction = matchaction
@MatchProcessPath = matchprocesspath
@MatchFilePath = matchfilepath
@FilePath = filepath
@RuleExist = ruleexist
@EventCount = eventcount
@LatestFoundTime = latestfoundtime
@RuleId = ruleid
end
def deserialize(params)
@ProcessName = params['ProcessName']
@MatchRuleName = params['MatchRuleName']
@FoundTime = params['FoundTime']
@ContainerName = params['ContainerName']
@ImageName = params['ImageName']
@Behavior = params['Behavior']
@Status = params['Status']
@Id = params['Id']
@FileName = params['FileName']
@EventType = params['EventType']
@ImageId = params['ImageId']
@ContainerId = params['ContainerId']
@Solution = params['Solution']
@Description = params['Description']
@MatchRuleId = params['MatchRuleId']
@MatchAction = params['MatchAction']
@MatchProcessPath = params['MatchProcessPath']
@MatchFilePath = params['MatchFilePath']
@FilePath = params['FilePath']
@RuleExist = params['RuleExist']
@EventCount = params['EventCount']
@LatestFoundTime = params['LatestFoundTime']
@RuleId = params['RuleId']
end
end
# 容器运行时，访问控制策略信息
class AccessControlRuleInfo < TencentCloud::Common::AbstractModel
# @param IsEnable: 开关,true:开启，false:禁用
# @type IsEnable: Boolean
# @param ImageIds: 生效惊现id，空数组代表全部镜像
# @type ImageIds: Array
# @param ChildRules: 用户策略的子策略数组
# @type ChildRules: Array
# @param RuleName: 策略名字
# @type RuleName: String
# @param RuleId: 策略id
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RuleId: String
# @param SystemChildRules: 系统策略的子策略数组
# @type SystemChildRules: Array
# @param IsDefault: 是否是系统默认策略
# @type IsDefault: Boolean
attr_accessor :IsEnable, :ImageIds, :ChildRules, :RuleName, :RuleId, :SystemChildRules, :IsDefault
def initialize(isenable=nil, imageids=nil, childrules=nil, rulename=nil, ruleid=nil, systemchildrules=nil, isdefault=nil)
@IsEnable = isenable
@ImageIds = imageids
@ChildRules = childrules
@RuleName = rulename
@RuleId = ruleid
@SystemChildRules = systemchildrules
@IsDefault = isdefault
end
def deserialize(params)
@IsEnable = params['IsEnable']
@ImageIds = params['ImageIds']
unless params['ChildRules'].nil?
@ChildRules = []
params['ChildRules'].each do |i|
accesscontrolchildruleinfo_tmp = AccessControlChildRuleInfo.new
accesscontrolchildruleinfo_tmp.deserialize(i)
@ChildRules << accesscontrolchildruleinfo_tmp
end
end
@RuleName = params['RuleName']
@RuleId = params['RuleId']
unless params['SystemChildRules'].nil?
@SystemChildRules = []
params['SystemChildRules'].each do |i|
accesscontrolsystemchildruleinfo_tmp = AccessControlSystemChildRuleInfo.new
accesscontrolsystemchildruleinfo_tmp.deserialize(i)
@SystemChildRules << accesscontrolsystemchildruleinfo_tmp
end
end
@IsDefault = params['IsDefault']
end
end
# 容器运行时安全，访问控制系统策略的子策略信息
class AccessControlSystemChildRuleInfo < TencentCloud::Common::AbstractModel
# @param RuleId: 子策略Id
# @type RuleId: String
# @param RuleMode: 策略模式, RULE_MODE_RELEASE: 放行
# RULE_MODE_ALERT: 告警
# RULE_MODE_HOLDUP:拦截
# @type RuleMode: String
# @param IsEnable: 子策略状态，true为开启，false为关闭
# @type IsEnable: Boolean
# @param RuleType: 子策略检测的入侵行为类型
# CHANGE_CRONTAB：篡改计划任务
# CHANGE_SYS_BIN：篡改系统程序
# CHANGE_USRCFG：篡改用户配置
# @type RuleType: String
attr_accessor :RuleId, :RuleMode, :IsEnable, :RuleType
def initialize(ruleid=nil, rulemode=nil, isenable=nil, ruletype=nil)
@RuleId = ruleid
@RuleMode = rulemode
@IsEnable = isenable
@RuleType = ruletype
end
def deserialize(params)
@RuleId = params['RuleId']
@RuleMode = params['RuleMode']
@IsEnable = params['IsEnable']
@RuleType = params['RuleType']
end
end
# AddAssetImageRegistryRegistryDetail请求参数结构体
class AddAssetImageRegistryRegistryDetailRequest < TencentCloud::Common::AbstractModel
# @param Name: 仓库名
# @type Name: String
# @param Username: 用户名
# @type Username: String
# @param Password: 密码
# @type Password: String
# @param Url: 仓库url
# @type Url: String
# @param RegistryType: 仓库类型，列表：harbor
# @type RegistryType: String
# @param NetType: 网络类型，列表：public（公网）
# @type NetType: String
# @param RegistryVersion: 仓库版本
# @type RegistryVersion: String
# @param RegistryRegion: 区域，列表：default（默认）
# @type RegistryRegion: String
# @param SpeedLimit: 限速
# @type SpeedLimit: Integer
# @param Insecure: 安全模式（证书校验）：0（默认） 非安全模式（跳过证书校验）：1
# @type Insecure: Integer
attr_accessor :Name, :Username, :Password, :Url, :RegistryType, :NetType, :RegistryVersion, :RegistryRegion, :SpeedLimit, :Insecure
def initialize(name=nil, username=nil, password=nil, url=nil, registrytype=nil, nettype=nil, registryversion=nil, registryregion=nil, speedlimit=nil, insecure=nil)
@Name = name
@Username = username
@Password = password
@Url = url
@RegistryType = registrytype
@NetType = nettype
@RegistryVersion = registryversion
@RegistryRegion = registryregion
@SpeedLimit = speedlimit
@Insecure = insecure
end
def deserialize(params)
@Name = params['Name']
@Username = params['Username']
@Password = params['Password']
@Url = params['Url']
@RegistryType = params['RegistryType']
@NetType = params['NetType']
@RegistryVersion = params['RegistryVersion']
@RegistryRegion = params['RegistryRegion']
@SpeedLimit = params['SpeedLimit']
@Insecure = params['Insecure']
end
end
# AddAssetImageRegistryRegistryDetail返回参数结构体
class AddAssetImageRegistryRegistryDetailResponse < TencentCloud::Common::AbstractModel
# @param HealthCheckErr: 连接错误信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type HealthCheckErr: String
# @param NameRepeatErr: 名称错误信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type NameRepeatErr: String
# @param RegistryId: 仓库唯一id
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RegistryId: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :HealthCheckErr, :NameRepeatErr, :RegistryId, :RequestId
def initialize(healthcheckerr=nil, namerepeaterr=nil, registryid=nil, requestid=nil)
@HealthCheckErr = healthcheckerr
@NameRepeatErr = namerepeaterr
@RegistryId = registryid
@RequestId = requestid
end
def deserialize(params)
@HealthCheckErr = params['HealthCheckErr']
@NameRepeatErr = params['NameRepeatErr']
@RegistryId = params['RegistryId']
@RequestId = params['RequestId']
end
end
# AddCompliancePolicyItemToWhitelist请求参数结构体
class AddCompliancePolicyItemToWhitelistRequest < TencentCloud::Common::AbstractModel
# @param CustomerPolicyItemIdSet: 要忽略的检测项的ID的列表
# @type CustomerPolicyItemIdSet: Array
attr_accessor :CustomerPolicyItemIdSet
def initialize(customerpolicyitemidset=nil)
@CustomerPolicyItemIdSet = customerpolicyitemidset
end
def deserialize(params)
@CustomerPolicyItemIdSet = params['CustomerPolicyItemIdSet']
end
end
# AddCompliancePolicyItemToWhitelist返回参数结构体
class AddCompliancePolicyItemToWhitelistResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# AddEditAbnormalProcessRule请求参数结构体
class AddEditAbnormalProcessRuleRequest < TencentCloud::Common::AbstractModel
# @param RuleInfo: 增加策略信息，策略id为空，编辑策略是id不能为空
# @type RuleInfo: :class:`Tencentcloud::Tcss.v20201101.models.AbnormalProcessRuleInfo`
# @param EventId: 仅在加白的时候带上
# @type EventId: String
attr_accessor :RuleInfo, :EventId
def initialize(ruleinfo=nil, eventid=nil)
@RuleInfo = ruleinfo
@EventId = eventid
end
def deserialize(params)
unless params['RuleInfo'].nil?
@RuleInfo = AbnormalProcessRuleInfo.new
@RuleInfo.deserialize(params['RuleInfo'])
end
@EventId = params['EventId']
end
end
# AddEditAbnormalProcessRule返回参数结构体
class AddEditAbnormalProcessRuleResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# AddEditAccessControlRule请求参数结构体
class AddEditAccessControlRuleRequest < TencentCloud::Common::AbstractModel
# @param RuleInfo: 增加策略信息，策略id为空，编辑策略是id不能为空
# @type RuleInfo: :class:`Tencentcloud::Tcss.v20201101.models.AccessControlRuleInfo`
# @param EventId: 仅在白名单时候使用
# @type EventId: String
attr_accessor :RuleInfo, :EventId
def initialize(ruleinfo=nil, eventid=nil)
@RuleInfo = ruleinfo
@EventId = eventid
end
def deserialize(params)
unless params['RuleInfo'].nil?
@RuleInfo = AccessControlRuleInfo.new
@RuleInfo.deserialize(params['RuleInfo'])
end
@EventId = params['EventId']
end
end
# AddEditAccessControlRule返回参数结构体
class AddEditAccessControlRuleResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# AddEditReverseShellWhiteList请求参数结构体
class AddEditReverseShellWhiteListRequest < TencentCloud::Common::AbstractModel
# @param WhiteListInfo: 增加或编辑白名单信息。新增白名单时WhiteListInfo.id为空，编辑白名单WhiteListInfo.id不能为空。
# @type WhiteListInfo: :class:`Tencentcloud::Tcss.v20201101.models.ReverseShellWhiteListInfo`
# @param EventId: 仅在添加事件白名单时候使用
# @type EventId: String
attr_accessor :WhiteListInfo, :EventId
def initialize(whitelistinfo=nil, eventid=nil)
@WhiteListInfo = whitelistinfo
@EventId = eventid
end
def deserialize(params)
unless params['WhiteListInfo'].nil?
@WhiteListInfo = ReverseShellWhiteListInfo.new
@WhiteListInfo.deserialize(params['WhiteListInfo'])
end
@EventId = params['EventId']
end
end
# AddEditReverseShellWhiteList返回参数结构体
class AddEditReverseShellWhiteListResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# AddEditRiskSyscallWhiteList请求参数结构体
class AddEditRiskSyscallWhiteListRequest < TencentCloud::Common::AbstractModel
# @param EventId: 仅在添加白名单时候使用
# @type EventId: String
# @param WhiteListInfo: 增加白名单信息，白名单id为空，编辑白名单id不能为空
# @type WhiteListInfo: :class:`Tencentcloud::Tcss.v20201101.models.RiskSyscallWhiteListInfo`
attr_accessor :EventId, :WhiteListInfo
def initialize(eventid=nil, whitelistinfo=nil)
@EventId = eventid
@WhiteListInfo = whitelistinfo
end
def deserialize(params)
@EventId = params['EventId']
unless params['WhiteListInfo'].nil?
@WhiteListInfo = RiskSyscallWhiteListInfo.new
@WhiteListInfo.deserialize(params['WhiteListInfo'])
end
end
end
# AddEditRiskSyscallWhiteList返回参数结构体
class AddEditRiskSyscallWhiteListResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# AddEditWarningRules请求参数结构体
class AddEditWarningRulesRequest < TencentCloud::Common::AbstractModel
# @param WarningRules: 告警开关策略
# @type WarningRules: Array
attr_accessor :WarningRules
def initialize(warningrules=nil)
@WarningRules = warningrules
end
def deserialize(params)
unless params['WarningRules'].nil?
@WarningRules = []
params['WarningRules'].each do |i|
warningrule_tmp = WarningRule.new
warningrule_tmp.deserialize(i)
@WarningRules << warningrule_tmp
end
end
end
end
# AddEditWarningRules返回参数结构体
class AddEditWarningRulesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# 受影响的节点类型结构体
class AffectedNodeItem < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群ID
# @type ClusterId: String
# @param ClusterName: 集群名字
# @type ClusterName: String
# @param InstanceId: 实例id
# @type InstanceId: String
# @param PrivateIpAddresses: 内网ip地址
# @type PrivateIpAddresses: String
# @param InstanceRole: 节点的角色，Master、Work等
# @type InstanceRole: String
# @param ClusterVersion: k8s版本
# @type ClusterVersion: String
# @param ContainerRuntime: 运行时组件,docker或者containerd
# @type ContainerRuntime: String
# @param Region: 区域
# @type Region: String
# @param VerifyInfo: 检查结果的验证信息
# @type VerifyInfo: String
attr_accessor :ClusterId, :ClusterName, :InstanceId, :PrivateIpAddresses, :InstanceRole, :ClusterVersion, :ContainerRuntime, :Region, :VerifyInfo
def initialize(clusterid=nil, clustername=nil, instanceid=nil, privateipaddresses=nil, instancerole=nil, clusterversion=nil, containerruntime=nil, region=nil, verifyinfo=nil)
@ClusterId = clusterid
@ClusterName = clustername
@InstanceId = instanceid
@PrivateIpAddresses = privateipaddresses
@InstanceRole = instancerole
@ClusterVersion = clusterversion
@ContainerRuntime = containerruntime
@Region = region
@VerifyInfo = verifyinfo
end
def deserialize(params)
@ClusterId = params['ClusterId']
@ClusterName = params['ClusterName']
@InstanceId = params['InstanceId']
@PrivateIpAddresses = params['PrivateIpAddresses']
@InstanceRole = params['InstanceRole']
@ClusterVersion = params['ClusterVersion']
@ContainerRuntime = params['ContainerRuntime']
@Region = params['Region']
@VerifyInfo = params['VerifyInfo']
end
end
# 集群安全检查受影响的工作负载Item
class AffectedWorkloadItem < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群Id
# @type ClusterId: String
# @param ClusterName: 集群名字
# @type ClusterName: String
# @param WorkloadName: 工作负载名称
# @type WorkloadName: String
# @param WorkloadType: 工作负载类型
# @type WorkloadType: String
# @param Region: 区域
# @type Region: String
# @param VerifyInfo: 检测结果的验证信息
# @type VerifyInfo: String
attr_accessor :ClusterId, :ClusterName, :WorkloadName, :WorkloadType, :Region, :VerifyInfo
def initialize(clusterid=nil, clustername=nil, workloadname=nil, workloadtype=nil, region=nil, verifyinfo=nil)
@ClusterId = clusterid
@ClusterName = clustername
@WorkloadName = workloadname
@WorkloadType = workloadtype
@Region = region
@VerifyInfo = verifyinfo
end
def deserialize(params)
@ClusterId = params['ClusterId']
@ClusterName = params['ClusterName']
@WorkloadName = params['WorkloadName']
@WorkloadType = params['WorkloadType']
@Region = params['Region']
@VerifyInfo = params['VerifyInfo']
end
end
# 容器安全
# 描述键值对过滤器，用于条件过滤查询。例如过滤ID、名称、状态等
# 若存在多个Filter时，Filter间的关系为逻辑与（AND）关系。
# 若同一个Filter存在多个Values，同一Filter下Values间的关系为逻辑或（OR）关系。
class AssetFilters < TencentCloud::Common::AbstractModel
# @param Name: 过滤键的名称
# @type Name: String
# @param Values: 一个或者多个过滤值。
# @type Values: Array
# @param ExactMatch: 是否模糊查询
# @type ExactMatch: Boolean
attr_accessor :Name, :Values, :ExactMatch
def initialize(name=nil, values=nil, exactmatch=nil)
@Name = name
@Values = values
@ExactMatch = exactmatch
end
def deserialize(params)
@Name = params['Name']
@Values = params['Values']
@ExactMatch = params['ExactMatch']
end
end
# 容器安全资产镜像简略信息
class AssetSimpleImageInfo < TencentCloud::Common::AbstractModel
# @param ImageID: 镜像ID
# @type ImageID: String
# @param ImageName: 镜像名称
# @type ImageName: String
# @param ContainerCnt: 关联容器个数
# @type ContainerCnt: Integer
# @param ScanTime: 最后扫描时间
# @type ScanTime: String
# @param Size: 镜像大小
# @type Size: Integer
attr_accessor :ImageID, :ImageName, :ContainerCnt, :ScanTime, :Size
def initialize(imageid=nil, imagename=nil, containercnt=nil, scantime=nil, size=nil)
@ImageID = imageid
@ImageName = imagename
@ContainerCnt = containercnt
@ScanTime = scantime
@Size = size
end
def deserialize(params)
@ImageID = params['ImageID']
@ImageName = params['ImageName']
@ContainerCnt = params['ContainerCnt']
@ScanTime = params['ScanTime']
@Size = params['Size']
end
end
# CheckRepeatAssetImageRegistry请求参数结构体
class CheckRepeatAssetImageRegistryRequest < TencentCloud::Common::AbstractModel
# @param Name: 仓库名
# @type Name: String
attr_accessor :Name
def initialize(name=nil)
@Name = name
end
def deserialize(params)
@Name = params['Name']
end
end
# CheckRepeatAssetImageRegistry返回参数结构体
class CheckRepeatAssetImageRegistryResponse < TencentCloud::Common::AbstractModel
# @param IsRepeat: 是否重复
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IsRepeat: Boolean
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :IsRepeat, :RequestId
def initialize(isrepeat=nil, requestid=nil)
@IsRepeat = isrepeat
@RequestId = requestid
end
def deserialize(params)
@IsRepeat = params['IsRepeat']
@RequestId = params['RequestId']
end
end
# 表示一条集群安全检测项的详细信息
class ClusterCheckItem < TencentCloud::Common::AbstractModel
# @param CheckItemId: 唯一的检测项的ID
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CheckItemId: Integer
# @param Name: 风险项的名称
# @type Name: String
# @param ItemDetail: 检测项详细描述。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ItemDetail: String
# @param RiskLevel: 威胁等级。严重Serious,高危High,中危Middle,提示Hint
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RiskLevel: String
# @param RiskTarget: 检查对象、风险对象.Runc,Kubelet,Containerd,Pods
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RiskTarget: String
# @param RiskType: 风险类别,漏洞风险CVERisk,配置风险ConfigRisk
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RiskType: String
# @param RiskAttribute: 检测项所属的风险类型,权限提升:PrivilegePromotion,拒绝服务:RefuseService,目录穿越:DirectoryEscape,未授权访问:UnauthorizedAccess,权限许可和访问控制问题:PrivilegeAndAccessControl,敏感信息泄露:SensitiveInfoLeak
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RiskAttribute: String
# @param RiskProperty: 风险特征,Tag.存在EXP:ExistEXP,存在POD:ExistPOC,无需重启:NoNeedReboot, 服务重启:ServerRestart,远程信息泄露:RemoteInfoLeak,远程拒绝服务:RemoteRefuseService,远程利用:RemoteExploit,远程执行:RemoteExecute
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RiskProperty: String
# @param CVENumber: CVE编号
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CVENumber: String
# @param DiscoverTime: 披露时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DiscoverTime: String
# @param Solution: 解决方案
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Solution: String
# @param CVSS: CVSS信息,用于画图
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CVSS: String
# @param CVSSScore: CVSS分数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CVSSScore: String
# @param RelateLink: 参考连接
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RelateLink: String
# @param AffectedType: 影响类型，为Node或者Workload
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AffectedType: String
# @param AffectedVersion: 受影响的版本信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AffectedVersion: String
attr_accessor :CheckItemId, :Name, :ItemDetail, :RiskLevel, :RiskTarget, :RiskType, :RiskAttribute, :RiskProperty, :CVENumber, :DiscoverTime, :Solution, :CVSS, :CVSSScore, :RelateLink, :AffectedType, :AffectedVersion
def initialize(checkitemid=nil, name=nil, itemdetail=nil, risklevel=nil, risktarget=nil, risktype=nil, riskattribute=nil, riskproperty=nil, cvenumber=nil, discovertime=nil, solution=nil, cvss=nil, cvssscore=nil, relatelink=nil, affectedtype=nil, affectedversion=nil)
@CheckItemId = checkitemid
@Name = name
@ItemDetail = itemdetail
@RiskLevel = risklevel
@RiskTarget = risktarget
@RiskType = risktype
@RiskAttribute = riskattribute
@RiskProperty = riskproperty
@CVENumber = cvenumber
@DiscoverTime = discovertime
@Solution = solution
@CVSS = cvss
@CVSSScore = cvssscore
@RelateLink = relatelink
@AffectedType = affectedtype
@AffectedVersion = affectedversion
end
def deserialize(params)
@CheckItemId = params['CheckItemId']
@Name = params['Name']
@ItemDetail = params['ItemDetail']
@RiskLevel = params['RiskLevel']
@RiskTarget = params['RiskTarget']
@RiskType = params['RiskType']
@RiskAttribute = params['RiskAttribute']
@RiskProperty = params['RiskProperty']
@CVENumber = params['CVENumber']
@DiscoverTime = params['DiscoverTime']
@Solution = params['Solution']
@CVSS = params['CVSS']
@CVSSScore = params['CVSSScore']
@RelateLink = params['RelateLink']
@AffectedType = params['AffectedType']
@AffectedVersion = params['AffectedVersion']
end
end
# 集群检查任务入参
class ClusterCheckTaskItem < TencentCloud::Common::AbstractModel
# @param ClusterId: 指定要扫描的集群ID
# @type ClusterId: String
# @param ClusterRegion: 集群所属地域
# @type ClusterRegion: String
# @param NodeIp: 指定要扫描的节点IP
# @type NodeIp: String
# @param WorkloadName: 按照要扫描的workload名字
# @type WorkloadName: String
attr_accessor :ClusterId, :ClusterRegion, :NodeIp, :WorkloadName
def initialize(clusterid=nil, clusterregion=nil, nodeip=nil, workloadname=nil)
@ClusterId = clusterid
@ClusterRegion = clusterregion
@NodeIp = nodeip
@WorkloadName = workloadname
end
def deserialize(params)
@ClusterId = params['ClusterId']
@ClusterRegion = params['ClusterRegion']
@NodeIp = params['NodeIp']
@WorkloadName = params['WorkloadName']
end
end
# CreateCheckComponent的入口参数,用于批量安装防御容器
class ClusterCreateComponentItem < TencentCloud::Common::AbstractModel
# @param ClusterId: 要安装组件的集群ID。
# @type ClusterId: String
# @param ClusterRegion: 该集群对应的地域
# @type ClusterRegion: String
attr_accessor :ClusterId, :ClusterRegion
def initialize(clusterid=nil, clusterregion=nil)
@ClusterId = clusterid
@ClusterRegion = clusterregion
end
def deserialize(params)
@ClusterId = params['ClusterId']
@ClusterRegion = params['ClusterRegion']
end
end
# 集群资产返回的结构体
class ClusterInfoItem < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群id
# @type ClusterId: String
# @param ClusterName: 集群名字
# @type ClusterName: String
# @param ClusterVersion: 集群版本
# @type ClusterVersion: String
# @param ClusterOs: 集群操作系统
# @type ClusterOs: String
# @param ClusterType: 集群类型
# @type ClusterType: String
# @param ClusterNodeNum: 集群节点数
# @type ClusterNodeNum: Integer
# @param Region: 集群区域
# @type Region: String
# @param DefenderStatus: 监控组件的状态，为Defender_Uninstall、Defender_Normal、Defender_Error、Defender_Installing
# @type DefenderStatus: String
# @param ClusterStatus: 集群状态
# @type ClusterStatus: String
# @param ClusterCheckMode: 集群的检测模式，为Cluster_Normal或者Cluster_Actived.
# @type ClusterCheckMode: String
# @param ClusterAutoCheck: 是否自动定期检测
# @type ClusterAutoCheck: Boolean
# @param DefenderErrorReason: 防护容器部署失败原因，为UserDaemonSetNotReady时,和UnreadyNodeNum转成"N个节点防御容器为就绪"，其他错误直接展示
# @type DefenderErrorReason: String
# @param UnreadyNodeNum: 防御容器没有ready状态的节点数量
# @type UnreadyNodeNum: Integer
# @param SeriousRiskCount: 严重风险检查项的数量
# @type SeriousRiskCount: Integer
# @param HighRiskCount: 高风险检查项的数量
# @type HighRiskCount: Integer
# @param MiddleRiskCount: 中风险检查项的数量
# @type MiddleRiskCount: Integer
# @param HintRiskCount: 提示风险检查项的数量
# @type HintRiskCount: Integer
# @param CheckFailReason: 检查失败原因
# @type CheckFailReason: String
# @param CheckStatus: 检查状态,为Task_Running, NoRisk, HasRisk, Uncheck, Task_Error
# @type CheckStatus: String
# @param TaskCreateTime: 任务创建时间,检查时间
# @type TaskCreateTime: String
attr_accessor :ClusterId, :ClusterName, :ClusterVersion, :ClusterOs, :ClusterType, :ClusterNodeNum, :Region, :DefenderStatus, :ClusterStatus, :ClusterCheckMode, :ClusterAutoCheck, :DefenderErrorReason, :UnreadyNodeNum, :SeriousRiskCount, :HighRiskCount, :MiddleRiskCount, :HintRiskCount, :CheckFailReason, :CheckStatus, :TaskCreateTime
def initialize(clusterid=nil, clustername=nil, clusterversion=nil, clusteros=nil, clustertype=nil, clusternodenum=nil, region=nil, defenderstatus=nil, clusterstatus=nil, clustercheckmode=nil, clusterautocheck=nil, defendererrorreason=nil, unreadynodenum=nil, seriousriskcount=nil, highriskcount=nil, middleriskcount=nil, hintriskcount=nil, checkfailreason=nil, checkstatus=nil, taskcreatetime=nil)
@ClusterId = clusterid
@ClusterName = clustername
@ClusterVersion = clusterversion
@ClusterOs = clusteros
@ClusterType = clustertype
@ClusterNodeNum = clusternodenum
@Region = region
@DefenderStatus = defenderstatus
@ClusterStatus = clusterstatus
@ClusterCheckMode = clustercheckmode
@ClusterAutoCheck = clusterautocheck
@DefenderErrorReason = defendererrorreason
@UnreadyNodeNum = unreadynodenum
@SeriousRiskCount = seriousriskcount
@HighRiskCount = highriskcount
@MiddleRiskCount = middleriskcount
@HintRiskCount = hintriskcount
@CheckFailReason = checkfailreason
@CheckStatus = checkstatus
@TaskCreateTime = taskcreatetime
end
def deserialize(params)
@ClusterId = params['ClusterId']
@ClusterName = params['ClusterName']
@ClusterVersion = params['ClusterVersion']
@ClusterOs = params['ClusterOs']
@ClusterType = params['ClusterType']
@ClusterNodeNum = params['ClusterNodeNum']
@Region = params['Region']
@DefenderStatus = params['DefenderStatus']
@ClusterStatus = params['ClusterStatus']
@ClusterCheckMode = params['ClusterCheckMode']
@ClusterAutoCheck = params['ClusterAutoCheck']
@DefenderErrorReason = params['DefenderErrorReason']
@UnreadyNodeNum = params['UnreadyNodeNum']
@SeriousRiskCount = params['SeriousRiskCount']
@HighRiskCount = params['HighRiskCount']
@MiddleRiskCount = params['MiddleRiskCount']
@HintRiskCount = params['HintRiskCount']
@CheckFailReason = params['CheckFailReason']
@CheckStatus = params['CheckStatus']
@TaskCreateTime = params['TaskCreateTime']
end
end
# 风险项是检查完之后，有问题的检测项，并且加了一些检查结果信息。
class ClusterRiskItem < TencentCloud::Common::AbstractModel
# @param CheckItem: 检测项相关信息
# @type CheckItem: :class:`Tencentcloud::Tcss.v20201101.models.ClusterCheckItem`
# @param VerifyInfo: 验证信息
# @type VerifyInfo: String
# @param ErrorMessage: 事件描述,检查的错误信息
# @type ErrorMessage: String
# @param AffectedClusterCount: 受影响的集群数量
# @type AffectedClusterCount: Integer
# @param AffectedNodeCount: 受影响的节点数量
# @type AffectedNodeCount: Integer
attr_accessor :CheckItem, :VerifyInfo, :ErrorMessage, :AffectedClusterCount, :AffectedNodeCount
def initialize(checkitem=nil, verifyinfo=nil, errormessage=nil, affectedclustercount=nil, affectednodecount=nil)
@CheckItem = checkitem
@VerifyInfo = verifyinfo
@ErrorMessage = errormessage
@AffectedClusterCount = affectedclustercount
@AffectedNodeCount = affectednodecount
end
def deserialize(params)
unless params['CheckItem'].nil?
@CheckItem = ClusterCheckItem.new
@CheckItem.deserialize(params['CheckItem'])
end
@VerifyInfo = params['VerifyInfo']
@ErrorMessage = params['ErrorMessage']
@AffectedClusterCount = params['AffectedClusterCount']
@AffectedNodeCount = params['AffectedNodeCount']
end
end
# 表示检测项所影响的资产的信息。
class ComplianceAffectedAsset < TencentCloud::Common::AbstractModel
# @param CustomerAssetId: 为客户分配的唯一的资产项的ID。
# @type CustomerAssetId: Integer
# @param AssetName: 资产项的名称。
# @type AssetName: String
# @param AssetType: 资产项的类型
# @type AssetType: String
# @param CheckStatus: 检测状态
# CHECK_INIT, 待检测
# CHECK_RUNNING, 检测中
# CHECK_FINISHED, 检测完成
# CHECK_FAILED, 检测失败
# @type CheckStatus: String
# @param NodeName: 节点名称。
# @type NodeName: String
# @param LastCheckTime: 上次检测的时间，格式为”YYYY-MM-DD HH:m::SS“。
# 如果没有检测过，此处为”0000-00-00 00:00:00“。
# @type LastCheckTime: String
# @param CheckResult: 检测结果。取值为：
# RESULT_FAILED: 未通过
# RESULT_PASSED: 通过
# @type CheckResult: String
# @param HostIP: 主机IP
# 注意：此字段可能返回 null，表示取不到有效值。
# @type HostIP: String
# @param ImageTag: 镜像的tag
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ImageTag: String
attr_accessor :CustomerAssetId, :AssetName, :AssetType, :CheckStatus, :NodeName, :LastCheckTime, :CheckResult, :HostIP, :ImageTag
def initialize(customerassetid=nil, assetname=nil, assettype=nil, checkstatus=nil, nodename=nil, lastchecktime=nil, checkresult=nil, hostip=nil, imagetag=nil)
@CustomerAssetId = customerassetid
@AssetName = assetname
@AssetType = assettype
@CheckStatus = checkstatus
@NodeName = nodename
@LastCheckTime = lastchecktime
@CheckResult = checkresult
@HostIP = hostip
@ImageTag = imagetag
end
def deserialize(params)
@CustomerAssetId = params['CustomerAssetId']
@AssetName = params['AssetName']
@AssetType = params['AssetType']
@CheckStatus = params['CheckStatus']
@NodeName = params['NodeName']
@LastCheckTime = params['LastCheckTime']
@CheckResult = params['CheckResult']
@HostIP = params['HostIP']
@ImageTag = params['ImageTag']
end
end
# 表示一项资产的详情。
class ComplianceAssetDetailInfo < TencentCloud::Common::AbstractModel
# @param CustomerAssetId: 客户资产的ID。
# @type CustomerAssetId: Integer
# @param AssetType: 资产类别。
# @type AssetType: String
# @param AssetName: 资产的名称。
# @type AssetName: String
# @param NodeName: 资产所属的节点的名称。
# @type NodeName: String
# @param HostName: 资产所在的主机的名称。
# @type HostName: String
# @param HostIP: 资产所在的主机的IP。
# @type HostIP: String
# @param CheckStatus: 检测状态
# CHECK_INIT, 待检测
# CHECK_RUNNING, 检测中
# CHECK_FINISHED, 检测完成
# CHECK_FAILED, 检测失败
# @type CheckStatus: String
# @param PassedPolicyItemCount: 此类资产通过的检测项的数目。
# @type PassedPolicyItemCount: Integer
# @param FailedPolicyItemCount: 此类资产未通过的检测的数目。
# @type FailedPolicyItemCount: Integer
# @param LastCheckTime: 上次检测的时间。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type LastCheckTime: String
# @param CheckResult: 检测结果：
# RESULT_FAILED: 未通过。
# RESULT_PASSED: 通过。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CheckResult: String
# @param AssetStatus: 资产的运行状态。
# @type AssetStatus: String
# @param AssetCreateTime: 创建资产的时间。
# ASSET_NORMAL: 正常运行，
# ASSET_PAUSED: 暂停运行，
# ASSET_STOPPED: 停止运行，
# ASSET_ABNORMAL: 异常
# @type AssetCreateTime: String
attr_accessor :CustomerAssetId, :AssetType, :AssetName, :NodeName, :HostName, :HostIP, :CheckStatus, :PassedPolicyItemCount, :FailedPolicyItemCount, :LastCheckTime, :CheckResult, :AssetStatus, :AssetCreateTime
def initialize(customerassetid=nil, assettype=nil, assetname=nil, nodename=nil, hostname=nil, hostip=nil, checkstatus=nil, passedpolicyitemcount=nil, failedpolicyitemcount=nil, lastchecktime=nil, checkresult=nil, assetstatus=nil, assetcreatetime=nil)
@CustomerAssetId = customerassetid
@AssetType = assettype
@AssetName = assetname
@NodeName = nodename
@HostName = hostname
@HostIP = hostip
@CheckStatus = checkstatus
@PassedPolicyItemCount = passedpolicyitemcount
@FailedPolicyItemCount = failedpolicyitemcount
@LastCheckTime = lastchecktime
@CheckResult = checkresult
@AssetStatus = assetstatus
@AssetCreateTime = assetcreatetime
end
def deserialize(params)
@CustomerAssetId = params['CustomerAssetId']
@AssetType = params['AssetType']
@AssetName = params['AssetName']
@NodeName = params['NodeName']
@HostName = params['HostName']
@HostIP = params['HostIP']
@CheckStatus = params['CheckStatus']
@PassedPolicyItemCount = params['PassedPolicyItemCount']
@FailedPolicyItemCount = params['FailedPolicyItemCount']
@LastCheckTime = params['LastCheckTime']
@CheckResult = params['CheckResult']
@AssetStatus = params['AssetStatus']
@AssetCreateTime = params['AssetCreateTime']
end
end
# 表示一项资产的信息。
class ComplianceAssetInfo < TencentCloud::Common::AbstractModel
# @param CustomerAssetId: 客户资产的ID。
# @type CustomerAssetId: Integer
# @param AssetType: 资产类别。
# @type AssetType: String
# @param AssetName: 资产的名称。
# @type AssetName: String
# @param ImageTag: 当资产为镜像时，这个字段为镜像Tag。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ImageTag: String
# @param HostIP: 资产所在的主机IP。
# @type HostIP: String
# @param NodeName: 资产所属的节点的名称
# @type NodeName: String
# @param CheckStatus: 检测状态
# CHECK_INIT, 待检测
# CHECK_RUNNING, 检测中
# CHECK_FINISHED, 检测完成
# CHECK_FAILED, 检测失败
# @type CheckStatus: String
# @param PassedPolicyItemCount: 此类资产通过的检测项的数目。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PassedPolicyItemCount: Integer
# @param FailedPolicyItemCount: 此类资产未通过的检测的数目。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type FailedPolicyItemCount: Integer
# @param LastCheckTime: 上次检测的时间。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type LastCheckTime: String
# @param CheckResult: 检测结果：
# RESULT_FAILED: 未通过。
# RESULT_PASSED: 通过。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CheckResult: String
attr_accessor :CustomerAssetId, :AssetType, :AssetName, :ImageTag, :HostIP, :NodeName, :CheckStatus, :PassedPolicyItemCount, :FailedPolicyItemCount, :LastCheckTime, :CheckResult
def initialize(customerassetid=nil, assettype=nil, assetname=nil, imagetag=nil, hostip=nil, nodename=nil, checkstatus=nil, passedpolicyitemcount=nil, failedpolicyitemcount=nil, lastchecktime=nil, checkresult=nil)
@CustomerAssetId = customerassetid
@AssetType = assettype
@AssetName = assetname
@ImageTag = imagetag
@HostIP = hostip
@NodeName = nodename
@CheckStatus = checkstatus
@PassedPolicyItemCount = passedpolicyitemcount
@FailedPolicyItemCount = failedpolicyitemcount
@LastCheckTime = lastchecktime
@CheckResult = checkresult
end
def deserialize(params)
@CustomerAssetId = params['CustomerAssetId']
@AssetType = params['AssetType']
@AssetName = params['AssetName']
@ImageTag = params['ImageTag']
@HostIP = params['HostIP']
@NodeName = params['NodeName']
@CheckStatus = params['CheckStatus']
@PassedPolicyItemCount = params['PassedPolicyItemCount']
@FailedPolicyItemCount = params['FailedPolicyItemCount']
@LastCheckTime = params['LastCheckTime']
@CheckResult = params['CheckResult']
end
end
# 表示一条检测项的信息。
class ComplianceAssetPolicyItem < TencentCloud::Common::AbstractModel
# @param CustomerPolicyItemId: 为客户分配的唯一的检测项的ID。
# @type CustomerPolicyItemId: Integer
# @param BasePolicyItemId: 检测项的原始ID
# @type BasePolicyItemId: Integer
# @param Name: 检测项的名称。
# @type Name: String
# @param Category: 检测项所属的类型的名称
# @type Category: String
# @param BenchmarkStandardId: 所属的合规标准的ID
# @type BenchmarkStandardId: Integer
# @param BenchmarkStandardName: 所属的合规标准的名称
# @type BenchmarkStandardName: String
# @param RiskLevel: 威胁等级
# @type RiskLevel: String
# @param CheckStatus: 检测状态
# CHECK_INIT, 待检测
# CHECK_RUNNING, 检测中
# CHECK_FINISHED, 检测完成
# CHECK_FAILED, 检测失败
# @type CheckStatus: String
# @param CheckResult: 检测结果
# RESULT_PASSED: 通过
# RESULT_FAILED: 未通过
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CheckResult: String
# @param WhitelistId: 检测项对应的白名单项的ID。如果存在且非0，表示检测项被用户忽略。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type WhitelistId: Integer
# @param FixSuggestion: 处理建议。
# @type FixSuggestion: String
# @param LastCheckTime: 最近检测的时间。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type LastCheckTime: String
attr_accessor :CustomerPolicyItemId, :BasePolicyItemId, :Name, :Category, :BenchmarkStandardId, :BenchmarkStandardName, :RiskLevel, :CheckStatus, :CheckResult, :WhitelistId, :FixSuggestion, :LastCheckTime
def initialize(customerpolicyitemid=nil, basepolicyitemid=nil, name=nil, category=nil, benchmarkstandardid=nil, benchmarkstandardname=nil, risklevel=nil, checkstatus=nil, checkresult=nil, whitelistid=nil, fixsuggestion=nil, lastchecktime=nil)
@CustomerPolicyItemId = customerpolicyitemid
@BasePolicyItemId = basepolicyitemid
@Name = name
@Category = category
@BenchmarkStandardId = benchmarkstandardid
@BenchmarkStandardName = benchmarkstandardname
@RiskLevel = risklevel
@CheckStatus = checkstatus
@CheckResult = checkresult
@WhitelistId = whitelistid
@FixSuggestion = fixsuggestion
@LastCheckTime = lastchecktime
end
def deserialize(params)
@CustomerPolicyItemId = params['CustomerPolicyItemId']
@BasePolicyItemId = params['BasePolicyItemId']
@Name = params['Name']
@Category = params['Category']
@BenchmarkStandardId = params['BenchmarkStandardId']
@BenchmarkStandardName = params['BenchmarkStandardName']
@RiskLevel = params['RiskLevel']
@CheckStatus = params['CheckStatus']
@CheckResult = params['CheckResult']
@WhitelistId = params['WhitelistId']
@FixSuggestion = params['FixSuggestion']
@LastCheckTime = params['LastCheckTime']
end
end
# 表示一类资产的总览信息。
class ComplianceAssetSummary < TencentCloud::Common::AbstractModel
# @param AssetType: 资产类别。
# @type AssetType: String
# @param IsCustomerFirstCheck: 是否为客户的首次检测。与CheckStatus配合使用。
# @type IsCustomerFirstCheck: Boolean
# @param CheckStatus: 检测状态
# CHECK_UNINIT, 用户未启用此功能
# CHECK_INIT, 待检测
# CHECK_RUNNING, 检测中
# CHECK_FINISHED, 检测完成
# CHECK_FAILED, 检测失败
# @type CheckStatus: String
# @param CheckProgress: 此类别的检测进度，为 0~100 的数。若未在检测中，无此字段。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CheckProgress: Float
# @param PassedPolicyItemCount: 此类资产通过的检测项的数目。
# @type PassedPolicyItemCount: Integer
# @param FailedPolicyItemCount: 此类资产未通过的检测的数目。
# @type FailedPolicyItemCount: Integer
# @param FailedCriticalPolicyItemCount: 此类资产下未通过的严重级别的检测项的数目。
# @type FailedCriticalPolicyItemCount: Integer
# @param FailedHighRiskPolicyItemCount: 此类资产下未通过的高危检测项的数目。
# @type FailedHighRiskPolicyItemCount: Integer
# @param FailedMediumRiskPolicyItemCount: 此类资产下未通过的中危检测项的数目。
# @type FailedMediumRiskPolicyItemCount: Integer
# @param FailedLowRiskPolicyItemCount: 此类资产下未通过的低危检测项的数目。
# @type FailedLowRiskPolicyItemCount: Integer
# @param NoticePolicyItemCount: 此类资产下提示级别的检测项的数目。
# @type NoticePolicyItemCount: Integer
# @param PassedAssetCount: 通过检测的资产的数目。
# @type PassedAssetCount: Integer
# @param FailedAssetCount: 未通过检测的资产的数目。
# @type FailedAssetCount: Integer
# @param AssetPassedRate: 此类资产的合规率，0~100的数。
# @type AssetPassedRate: Float
# @param ScanFailedAssetCount: 检测失败的资产的数目。
# @type ScanFailedAssetCount: Integer
# @param CheckCostTime: 上次检测的耗时，单位为秒。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CheckCostTime: Float
# @param LastCheckTime: 上次检测的时间。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type LastCheckTime: String
# @param PeriodRule: 定时检测规则。
# @type PeriodRule: :class:`Tencentcloud::Tcss.v20201101.models.CompliancePeriodTaskRule`
# @param OpenPolicyItemCount: 已开启的检查项总数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type OpenPolicyItemCount: Integer
# @param IgnoredPolicyItemCount: 已忽略的检查项总数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IgnoredPolicyItemCount: Integer
attr_accessor :AssetType, :IsCustomerFirstCheck, :CheckStatus, :CheckProgress, :PassedPolicyItemCount, :FailedPolicyItemCount, :FailedCriticalPolicyItemCount, :FailedHighRiskPolicyItemCount, :FailedMediumRiskPolicyItemCount, :FailedLowRiskPolicyItemCount, :NoticePolicyItemCount, :PassedAssetCount, :FailedAssetCount, :AssetPassedRate, :ScanFailedAssetCount, :CheckCostTime, :LastCheckTime, :PeriodRule, :OpenPolicyItemCount, :IgnoredPolicyItemCount
def initialize(assettype=nil, iscustomerfirstcheck=nil, checkstatus=nil, checkprogress=nil, passedpolicyitemcount=nil, failedpolicyitemcount=nil, failedcriticalpolicyitemcount=nil, failedhighriskpolicyitemcount=nil, failedmediumriskpolicyitemcount=nil, failedlowriskpolicyitemcount=nil, noticepolicyitemcount=nil, passedassetcount=nil, failedassetcount=nil, assetpassedrate=nil, scanfailedassetcount=nil, checkcosttime=nil, lastchecktime=nil, periodrule=nil, openpolicyitemcount=nil, ignoredpolicyitemcount=nil)
@AssetType = assettype
@IsCustomerFirstCheck = iscustomerfirstcheck
@CheckStatus = checkstatus
@CheckProgress = checkprogress
@PassedPolicyItemCount = passedpolicyitemcount
@FailedPolicyItemCount = failedpolicyitemcount
@FailedCriticalPolicyItemCount = failedcriticalpolicyitemcount
@FailedHighRiskPolicyItemCount = failedhighriskpolicyitemcount
@FailedMediumRiskPolicyItemCount = failedmediumriskpolicyitemcount
@FailedLowRiskPolicyItemCount = failedlowriskpolicyitemcount
@NoticePolicyItemCount = noticepolicyitemcount
@PassedAssetCount = passedassetcount
@FailedAssetCount = failedassetcount
@AssetPassedRate = assetpassedrate
@ScanFailedAssetCount = scanfailedassetcount
@CheckCostTime = checkcosttime
@LastCheckTime = lastchecktime
@PeriodRule = periodrule
@OpenPolicyItemCount = openpolicyitemcount
@IgnoredPolicyItemCount = ignoredpolicyitemcount
end
def deserialize(params)
@AssetType = params['AssetType']
@IsCustomerFirstCheck = params['IsCustomerFirstCheck']
@CheckStatus = params['CheckStatus']
@CheckProgress = params['CheckProgress']
@PassedPolicyItemCount = params['PassedPolicyItemCount']
@FailedPolicyItemCount = params['FailedPolicyItemCount']
@FailedCriticalPolicyItemCount = params['FailedCriticalPolicyItemCount']
@FailedHighRiskPolicyItemCount = params['FailedHighRiskPolicyItemCount']
@FailedMediumRiskPolicyItemCount = params['FailedMediumRiskPolicyItemCount']
@FailedLowRiskPolicyItemCount = params['FailedLowRiskPolicyItemCount']
@NoticePolicyItemCount = params['NoticePolicyItemCount']
@PassedAssetCount = params['PassedAssetCount']
@FailedAssetCount = params['FailedAssetCount']
@AssetPassedRate = params['AssetPassedRate']
@ScanFailedAssetCount = params['ScanFailedAssetCount']
@CheckCostTime = params['CheckCostTime']
@LastCheckTime = params['LastCheckTime']
unless params['PeriodRule'].nil?
@PeriodRule = CompliancePeriodTaskRule.new
@PeriodRule.deserialize(params['PeriodRule'])
end
@OpenPolicyItemCount = params['OpenPolicyItemCount']
@IgnoredPolicyItemCount = params['IgnoredPolicyItemCount']
end
end
# 表示一个合规标准的信息。
class ComplianceBenchmarkStandard < TencentCloud::Common::AbstractModel
# @param StandardId: 合规标准的ID
# @type StandardId: Integer
# @param Name: 合规标准的名称
# @type Name: String
# @param PolicyItemCount: 合规标准包含的数目
# @type PolicyItemCount: Integer
# @param Enabled: 是否启用此标准
# @type Enabled: Boolean
# @param Description: 标准的描述
# @type Description: String
attr_accessor :StandardId, :Name, :PolicyItemCount, :Enabled, :Description
def initialize(standardid=nil, name=nil, policyitemcount=nil, enabled=nil, description=nil)
@StandardId = standardid
@Name = name
@PolicyItemCount = policyitemcount
@Enabled = enabled
@Description = description
end
def deserialize(params)
@StandardId = params['StandardId']
@Name = params['Name']
@PolicyItemCount = params['PolicyItemCount']
@Enabled = params['Enabled']
@Description = params['Description']
end
end
# 表示是否启用合规标准。
class ComplianceBenchmarkStandardEnable < TencentCloud::Common::AbstractModel
# @param StandardId: 合规标准的ID。
# @type StandardId: Integer
# @param Enable: 是否启用合规标准
# @type Enable: Boolean
attr_accessor :StandardId, :Enable
def initialize(standardid=nil, enable=nil)
@StandardId = standardid
@Enable = enable
end
def deserialize(params)
@StandardId = params['StandardId']
@Enable = params['Enable']
end
end
# 表示容器资产专属的详情。
class ComplianceContainerDetailInfo < TencentCloud::Common::AbstractModel
# @param ContainerId: 容器在主机上的ID。
# @type ContainerId: String
# @param PodName: 容器所属的Pod的名称。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PodName: String
attr_accessor :ContainerId, :PodName
def initialize(containerid=nil, podname=nil)
@ContainerId = containerid
@PodName = podname
end
def deserialize(params)
@ContainerId = params['ContainerId']
@PodName = params['PodName']
end
end
# 键值对过滤器，用于条件过滤查询。例如过滤ID、名称、状态等 若存在多个Filter时，Filter间的关系为逻辑与（AND）关系。 若同一个Filter存在多个Values，同一Filter下Values间的关系为逻辑或（OR）关系。
class ComplianceFilters < TencentCloud::Common::AbstractModel
# @param Name: 过滤键的名称
# @type Name: String
# @param Values: 一个或者多个过滤值。
# @type Values: Array
# @param ExactMatch: 是否模糊查询。默认为是。
# @type ExactMatch: Boolean
attr_accessor :Name, :Values, :ExactMatch
def initialize(name=nil, values=nil, exactmatch=nil)
@Name = name
@Values = values
@ExactMatch = exactmatch
end
def deserialize(params)
@Name = params['Name']
@Values = params['Values']
@ExactMatch = params['ExactMatch']
end
end
# 表示主机资产专属的详情。
class ComplianceHostDetailInfo < TencentCloud::Common::AbstractModel
# @param DockerVersion: 主机上的Docker版本。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DockerVersion: String
# @param K8SVersion: 主机上的K8S的版本。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type K8SVersion: String
attr_accessor :DockerVersion, :K8SVersion
def initialize(dockerversion=nil, k8sversion=nil)
@DockerVersion = dockerversion
@K8SVersion = k8sversion
end
def deserialize(params)
@DockerVersion = params['DockerVersion']
@K8SVersion = params['K8SVersion']
end
end
# 表示镜像资产专属的详情。
class ComplianceImageDetailInfo < TencentCloud::Common::AbstractModel
# @param ImageId: 镜像在主机上的ID。
# @type ImageId: String
# @param ImageName: 镜像的名称。
# @type ImageName: String
# @param ImageTag: 镜像的Tag。
# @type ImageTag: String
# @param Repository: 镜像所在远程仓库的路径。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Repository: String
attr_accessor :ImageId, :ImageName, :ImageTag, :Repository
def initialize(imageid=nil, imagename=nil, imagetag=nil, repository=nil)
@ImageId = imageid
@ImageName = imagename
@ImageTag = imagetag
@Repository = repository
end
def deserialize(params)
@ImageId = params['ImageId']
@ImageName = params['ImageName']
@ImageTag = params['ImageTag']
@Repository = params['Repository']
end
end
# 表示K8S资产专属的详情。
class ComplianceK8SDetailInfo < TencentCloud::Common::AbstractModel
# @param ClusterName: K8S集群的名称。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ClusterName: String
# @param ClusterVersion: K8S集群的版本。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ClusterVersion: String
attr_accessor :ClusterName, :ClusterVersion
def initialize(clustername=nil, clusterversion=nil)
@ClusterName = clustername
@ClusterVersion = clusterversion
end
def deserialize(params)
@ClusterName = params['ClusterName']
@ClusterVersion = params['ClusterVersion']
end
end
# 表示一个合规基线检测定时任务的信息。
class CompliancePeriodTask < TencentCloud::Common::AbstractModel
# @param PeriodTaskId: 周期任务的ID
# @type PeriodTaskId: Integer
# @param AssetType: 资产类型。
# ASSET_CONTAINER, 容器
# ASSET_IMAGE, 镜像
# ASSET_HOST, 主机
# ASSET_K8S, K8S资产
# @type AssetType: String
# @param LastTriggerTime: 最近一次触发的时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type LastTriggerTime: String
# @param TotalPolicyItemCount: 总的检查项数目
# @type TotalPolicyItemCount: Integer
# @param PeriodRule: 周期设置
# @type PeriodRule: :class:`Tencentcloud::Tcss.v20201101.models.CompliancePeriodTaskRule`
# @param BenchmarkStandardSet: 合规标准列表
# @type BenchmarkStandardSet: Array
attr_accessor :PeriodTaskId, :AssetType, :LastTriggerTime, :TotalPolicyItemCount, :PeriodRule, :BenchmarkStandardSet
def initialize(periodtaskid=nil, assettype=nil, lasttriggertime=nil, totalpolicyitemcount=nil, periodrule=nil, benchmarkstandardset=nil)
@PeriodTaskId = periodtaskid
@AssetType = assettype
@LastTriggerTime = lasttriggertime
@TotalPolicyItemCount = totalpolicyitemcount
@PeriodRule = periodrule
@BenchmarkStandardSet = benchmarkstandardset
end
def deserialize(params)
@PeriodTaskId = params['PeriodTaskId']
@AssetType = params['AssetType']
@LastTriggerTime = params['LastTriggerTime']
@TotalPolicyItemCount = params['TotalPolicyItemCount']
unless params['PeriodRule'].nil?
@PeriodRule = CompliancePeriodTaskRule.new
@PeriodRule.deserialize(params['PeriodRule'])
end
unless params['BenchmarkStandardSet'].nil?
@BenchmarkStandardSet = []
params['BenchmarkStandardSet'].each do |i|
compliancebenchmarkstandard_tmp = ComplianceBenchmarkStandard.new
compliancebenchmarkstandard_tmp.deserialize(i)
@BenchmarkStandardSet << compliancebenchmarkstandard_tmp
end
end
end
end
# 表示一个定时任务的周期设置
class CompliancePeriodTaskRule < TencentCloud::Common::AbstractModel
# @param Frequency: 执行的频率（几天一次），取值为：1,3,7。
# @type Frequency: Integer
# @param ExecutionTime: 在这天的什么时间执行，格式为：HH:mm:SS。
# @type ExecutionTime: String
# @param Enable: 是否开启
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Enable: Boolean
attr_accessor :Frequency, :ExecutionTime, :Enable
def initialize(frequency=nil, executiontime=nil, enable=nil)
@Frequency = frequency
@ExecutionTime = executiontime
@Enable = enable
end
def deserialize(params)
@Frequency = params['Frequency']
@ExecutionTime = params['ExecutionTime']
@Enable = params['Enable']
end
end
# 表示一条检测项对应的汇总信息。
class CompliancePolicyItemSummary < TencentCloud::Common::AbstractModel
# @param CustomerPolicyItemId: 为客户分配的唯一的检测项的ID。
# @type CustomerPolicyItemId: Integer
# @param BasePolicyItemId: 检测项的原始ID。
# @type BasePolicyItemId: Integer
# @param Name: 检测项的名称。
# @type Name: String
# @param Category: 检测项所属的类型，枚举字符串。
# @type Category: String
# @param BenchmarkStandardName: 所属的合规标准
# @type BenchmarkStandardName: String
# @param RiskLevel: 威胁等级。RISK_CRITICAL, RISK_HIGH, RISK_MEDIUM, RISK_LOW, RISK_NOTICE。
# @type RiskLevel: String
# @param AssetType: 检测项所属的资产类型
# @type AssetType: String
# @param LastCheckTime: 最近检测的时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type LastCheckTime: String
# @param CheckStatus: 检测状态
# CHECK_INIT, 待检测
# CHECK_RUNNING, 检测中
# CHECK_FINISHED, 检测完成
# CHECK_FAILED, 检测失败
# @type CheckStatus: String
# @param CheckResult: 检测结果。RESULT_PASSED: 通过
# RESULT_FAILED: 未通过
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CheckResult: String
# @param PassedAssetCount: 通过检测的资产的数目
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PassedAssetCount: Integer
# @param FailedAssetCount: 未通过检测的资产的数目
# 注意：此字段可能返回 null，表示取不到有效值。
# @type FailedAssetCount: Integer
# @param WhitelistId: 检测项对应的白名单项的ID。如果存在且非0，表示检测项被用户忽略。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type WhitelistId: Integer
# @param FixSuggestion: 处理建议。
# @type FixSuggestion: String
# @param BenchmarkStandardId: 所属的合规标准的ID
# @type BenchmarkStandardId: Integer
attr_accessor :CustomerPolicyItemId, :BasePolicyItemId, :Name, :Category, :BenchmarkStandardName, :RiskLevel, :AssetType, :LastCheckTime, :CheckStatus, :CheckResult, :PassedAssetCount, :FailedAssetCount, :WhitelistId, :FixSuggestion, :BenchmarkStandardId
def initialize(customerpolicyitemid=nil, basepolicyitemid=nil, name=nil, category=nil, benchmarkstandardname=nil, risklevel=nil, assettype=nil, lastchecktime=nil, checkstatus=nil, checkresult=nil, passedassetcount=nil, failedassetcount=nil, whitelistid=nil, fixsuggestion=nil, benchmarkstandardid=nil)
@CustomerPolicyItemId = customerpolicyitemid
@BasePolicyItemId = basepolicyitemid
@Name = name
@Category = category
@BenchmarkStandardName = benchmarkstandardname
@RiskLevel = risklevel
@AssetType = assettype
@LastCheckTime = lastchecktime
@CheckStatus = checkstatus
@CheckResult = checkresult
@PassedAssetCount = passedassetcount
@FailedAssetCount = failedassetcount
@WhitelistId = whitelistid
@FixSuggestion = fixsuggestion
@BenchmarkStandardId = benchmarkstandardid
end
def deserialize(params)
@CustomerPolicyItemId = params['CustomerPolicyItemId']
@BasePolicyItemId = params['BasePolicyItemId']
@Name = params['Name']
@Category = params['Category']
@BenchmarkStandardName = params['BenchmarkStandardName']
@RiskLevel = params['RiskLevel']
@AssetType = params['AssetType']
@LastCheckTime = params['LastCheckTime']
@CheckStatus = params['CheckStatus']
@CheckResult = params['CheckResult']
@PassedAssetCount = params['PassedAssetCount']
@FailedAssetCount = params['FailedAssetCount']
@WhitelistId = params['WhitelistId']
@FixSuggestion = params['FixSuggestion']
@BenchmarkStandardId = params['BenchmarkStandardId']
end
end
# 表示检测失败的资产的信息。
class ComplianceScanFailedAsset < TencentCloud::Common::AbstractModel
# @param CustomerAssetId: 客户资产的ID。
# @type CustomerAssetId: Integer
# @param AssetType: 资产类别。
# @type AssetType: String
# @param CheckStatus: 检测状态
# CHECK_INIT, 待检测
# CHECK_RUNNING, 检测中
# CHECK_FINISHED, 检测完成
# CHECK_FAILED, 检测失败
# @type CheckStatus: String
# @param AssetName: 资产的名称。
# @type AssetName: String
# @param FailureReason: 资产检测失败的原因。
# @type FailureReason: String
# @param Suggestion: 检测失败的处理建议。
# @type Suggestion: String
# @param CheckTime: 检测的时间。
# @type CheckTime: String
attr_accessor :CustomerAssetId, :AssetType, :CheckStatus, :AssetName, :FailureReason, :Suggestion, :CheckTime
def initialize(customerassetid=nil, assettype=nil, checkstatus=nil, assetname=nil, failurereason=nil, suggestion=nil, checktime=nil)
@CustomerAssetId = customerassetid
@AssetType = assettype
@CheckStatus = checkstatus
@AssetName = assetname
@FailureReason = failurereason
@Suggestion = suggestion
@CheckTime = checktime
end
def deserialize(params)
@CustomerAssetId = params['CustomerAssetId']
@AssetType = params['AssetType']
@CheckStatus = params['CheckStatus']
@AssetName = params['AssetName']
@FailureReason = params['FailureReason']
@Suggestion = params['Suggestion']
@CheckTime = params['CheckTime']
end
end
# 表示一条白名单记录。
class ComplianceWhitelistItem < TencentCloud::Common::AbstractModel
# @param WhitelistItemId: 白名单项的ID。
# @type WhitelistItemId: Integer
# @param CustomerPolicyItemId: 客户检测项的ID。
# @type CustomerPolicyItemId: Integer
# @param Name: 检测项的名称。
# @type Name: String
# @param StandardName: 合规标准的名称。
# @type StandardName: String
# @param StandardId: 合规标准的ID。
# @type StandardId: Integer
# @param AffectedAssetCount: 检测项影响的资产的数目。
# @type AffectedAssetCount: Integer
# @param LastUpdateTime: 最后更新的时间
# @type LastUpdateTime: String
# @param InsertTime: 加入到白名单的时间
# @type InsertTime: String
attr_accessor :WhitelistItemId, :CustomerPolicyItemId, :Name, :StandardName, :StandardId, :AffectedAssetCount, :LastUpdateTime, :InsertTime
def initialize(whitelistitemid=nil, customerpolicyitemid=nil, name=nil, standardname=nil, standardid=nil, affectedassetcount=nil, lastupdatetime=nil, inserttime=nil)
@WhitelistItemId = whitelistitemid
@CustomerPolicyItemId = customerpolicyitemid
@Name = name
@StandardName = standardname
@StandardId = standardid
@AffectedAssetCount = affectedassetcount
@LastUpdateTime = lastupdatetime
@InsertTime = inserttime
end
def deserialize(params)
@WhitelistItemId = params['WhitelistItemId']
@CustomerPolicyItemId = params['CustomerPolicyItemId']
@Name = params['Name']
@StandardName = params['StandardName']
@StandardId = params['StandardId']
@AffectedAssetCount = params['AffectedAssetCount']
@LastUpdateTime = params['LastUpdateTime']
@InsertTime = params['InsertTime']
end
end
# 容器组件信息
class ComponentInfo < TencentCloud::Common::AbstractModel
# @param Name: 名称
# @type Name: String
# @param Version: 版本
# @type Version: String
attr_accessor :Name, :Version
def initialize(name=nil, version=nil)
@Name = name
@Version = version
end
def deserialize(params)
@Name = params['Name']
@Version = params['Version']
end
end
# 组件信息
class ComponentsInfo < TencentCloud::Common::AbstractModel
# @param Component: 组件名称
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Component: String
# @param Version: 组件版本信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Version: String
attr_accessor :Component, :Version
def initialize(component=nil, version=nil)
@Component = component
@Version = version
end
def deserialize(params)
@Component = params['Component']
@Version = params['Version']
end
end
# 容器列表集合
class ContainerInfo < TencentCloud::Common::AbstractModel
# @param ContainerID: 容器id
# @type ContainerID: String
# @param ContainerName: 容器名称
# @type ContainerName: String
# @param Status: 容器运行状态
# @type Status: String
# @param CreateTime: 创建时间
# @type CreateTime: String
# @param RunAs: 运行用户
# @type RunAs: String
# @param Cmd: 命令行
# @type Cmd: String
# @param CPUUsage: CPU使用率 *1000
# @type CPUUsage: Integer
# @param RamUsage: 内存使用 kb
# @type RamUsage: Integer
# @param ImageName: 镜像名称
# @type ImageName: String
# @param ImageID: 镜像id
# @type ImageID: String
# @param POD: 镜像id
# @type POD: String
# @param HostID: 主机id
# @type HostID: String
# @param HostIP: 主机ip
# @type HostIP: String
# @param UpdateTime: 更新时间
# @type UpdateTime: String
# @param HostName: 主机名称
# @type HostName: String
# @param PublicIp: 外网ip
# @type PublicIp: String
attr_accessor :ContainerID, :ContainerName, :Status, :CreateTime, :RunAs, :Cmd, :CPUUsage, :RamUsage, :ImageName, :ImageID, :POD, :HostID, :HostIP, :UpdateTime, :HostName, :PublicIp
def initialize(containerid=nil, containername=nil, status=nil, createtime=nil, runas=nil, cmd=nil, cpuusage=nil, ramusage=nil, imagename=nil, imageid=nil, pod=nil, hostid=nil, hostip=nil, updatetime=nil, hostname=nil, publicip=nil)
@ContainerID = containerid
@ContainerName = containername
@Status = status
@CreateTime = createtime
@RunAs = runas
@Cmd = cmd
@CPUUsage = cpuusage
@RamUsage = ramusage
@ImageName = imagename
@ImageID = imageid
@POD = pod
@HostID = hostid
@HostIP = hostip
@UpdateTime = updatetime
@HostName = hostname
@PublicIp = publicip
end
def deserialize(params)
@ContainerID = params['ContainerID']
@ContainerName = params['ContainerName']
@Status = params['Status']
@CreateTime = params['CreateTime']
@RunAs = params['RunAs']
@Cmd = params['Cmd']
@CPUUsage = params['CPUUsage']
@RamUsage = params['RamUsage']
@ImageName = params['ImageName']
@ImageID = params['ImageID']
@POD = params['POD']
@HostID = params['HostID']
@HostIP = params['HostIP']
@UpdateTime = params['UpdateTime']
@HostName = params['HostName']
@PublicIp = params['PublicIp']
end
end
# 容器挂载信息
class ContainerMount < TencentCloud::Common::AbstractModel
# @param Type: 挂载类型 bind
# @type Type: String
# @param Source: 宿主机路径
# @type Source: String
# @param Destination: 容器内路径
# @type Destination: String
# @param Mode: 模式
# @type Mode: String
# @param RW: 读写权限
# @type RW: Boolean
# @param Propagation: 传播类型
# @type Propagation: String
# @param Name: 名称
# @type Name: String
# @param Driver: 驱动
# @type Driver: String
attr_accessor :Type, :Source, :Destination, :Mode, :RW, :Propagation, :Name, :Driver
def initialize(type=nil, source=nil, destination=nil, mode=nil, rw=nil, propagation=nil, name=nil, driver=nil)
@Type = type
@Source = source
@Destination = destination
@Mode = mode
@RW = rw
@Propagation = propagation
@Name = name
@Driver = driver
end
def deserialize(params)
@Type = params['Type']
@Source = params['Source']
@Destination = params['Destination']
@Mode = params['Mode']
@RW = params['RW']
@Propagation = params['Propagation']
@Name = params['Name']
@Driver = params['Driver']
end
end
# 容器网络信息
class ContainerNetwork < TencentCloud::Common::AbstractModel
# @param EndpointID: endpoint id
# @type EndpointID: String
# @param Mode: 模式:bridge
# @type Mode: String
# @param Name: 网络名称
# @type Name: String
# @param NetworkID: 网络ID
# @type NetworkID: String
# @param Gateway: 网关
# @type Gateway: String
# @param Ipv4: IPV4地址
# @type Ipv4: String
# @param Ipv6: IPV6地址
# @type Ipv6: String
# @param MAC: MAC 地址
# @type MAC: String
attr_accessor :EndpointID, :Mode, :Name, :NetworkID, :Gateway, :Ipv4, :Ipv6, :MAC
def initialize(endpointid=nil, mode=nil, name=nil, networkid=nil, gateway=nil, ipv4=nil, ipv6=nil, mac=nil)
@EndpointID = endpointid
@Mode = mode
@Name = name
@NetworkID = networkid
@Gateway = gateway
@Ipv4 = ipv4
@Ipv6 = ipv6
@MAC = mac
end
def deserialize(params)
@EndpointID = params['EndpointID']
@Mode = params['Mode']
@Name = params['Name']
@NetworkID = params['NetworkID']
@Gateway = params['Gateway']
@Ipv4 = params['Ipv4']
@Ipv6 = params['Ipv6']
@MAC = params['MAC']
end
end
# CreateAssetImageRegistryScanTaskOneKey请求参数结构体
class CreateAssetImageRegistryScanTaskOneKeyRequest < TencentCloud::Common::AbstractModel
# @param All: 是否扫描全部镜像
# @type All: Boolean
# @param Images: 扫描的镜像列表
# @type Images: Array
# @param ScanType: 扫描类型数组
# @type ScanType: Array
# @param Id: 扫描的镜像列表Id
# @type Id: Array
attr_accessor :All, :Images, :ScanType, :Id
def initialize(all=nil, images=nil, scantype=nil, id=nil)
@All = all
@Images = images
@ScanType = scantype
@Id = id
end
def deserialize(params)
@All = params['All']
unless params['Images'].nil?
@Images = []
params['Images'].each do |i|
imageinfo_tmp = ImageInfo.new
imageinfo_tmp.deserialize(i)
@Images << imageinfo_tmp
end
end
@ScanType = params['ScanType']
@Id = params['Id']
end
end
# CreateAssetImageRegistryScanTaskOneKey返回参数结构体
class CreateAssetImageRegistryScanTaskOneKeyResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# CreateAssetImageRegistryScanTask请求参数结构体
class CreateAssetImageRegistryScanTaskRequest < TencentCloud::Common::AbstractModel
# @param All: 是否扫描全部镜像
# @type All: Boolean
# @param Images: 扫描的镜像列表
# @type Images: Array
# @param ScanType: 扫描类型数组
# @type ScanType: Array
# @param Id: 扫描的镜像列表
# @type Id: Array
# @param Filters: 过滤条件
# @type Filters: Array
# @param ExcludeImageList: 不需要扫描的镜像列表, 与Filters配合使用
# @type ExcludeImageList: Array
# @param OnlyScanLatest: 是否仅扫描各repository最新版的镜像, 与Filters配合使用
# @type OnlyScanLatest: Boolean
attr_accessor :All, :Images, :ScanType, :Id, :Filters, :ExcludeImageList, :OnlyScanLatest
def initialize(all=nil, images=nil, scantype=nil, id=nil, filters=nil, excludeimagelist=nil, onlyscanlatest=nil)
@All = all
@Images = images
@ScanType = scantype
@Id = id
@Filters = filters
@ExcludeImageList = excludeimagelist
@OnlyScanLatest = onlyscanlatest
end
def deserialize(params)
@All = params['All']
unless params['Images'].nil?
@Images = []
params['Images'].each do |i|
imageinfo_tmp = ImageInfo.new
imageinfo_tmp.deserialize(i)
@Images << imageinfo_tmp
end
end
@ScanType = params['ScanType']
@Id = params['Id']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
assetfilters_tmp = AssetFilters.new
assetfilters_tmp.deserialize(i)
@Filters << assetfilters_tmp
end
end
@ExcludeImageList = params['ExcludeImageList']
@OnlyScanLatest = params['OnlyScanLatest']
end
end
# CreateAssetImageRegistryScanTask返回参数结构体
class CreateAssetImageRegistryScanTaskResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# CreateAssetImageScanSetting请求参数结构体
class CreateAssetImageScanSettingRequest < TencentCloud::Common::AbstractModel
# @param Enable: 开关
# @type Enable: Boolean
# @param ScanTime: 扫描时间
# @type ScanTime: String
# @param ScanPeriod: 扫描周期
# @type ScanPeriod: Integer
# @param ScanVirus: 扫描木马
# @type ScanVirus: Boolean
# @param ScanRisk: 扫描敏感信息
# @type ScanRisk: Boolean
# @param ScanVul: 扫描漏洞
# @type ScanVul: Boolean
# @param All: 全部镜像
# @type All: Boolean
# @param Images: 自定义镜像
# @type Images: Array
attr_accessor :Enable, :ScanTime, :ScanPeriod, :ScanVirus, :ScanRisk, :ScanVul, :All, :Images
def initialize(enable=nil, scantime=nil, scanperiod=nil, scanvirus=nil, scanrisk=nil, scanvul=nil, all=nil, images=nil)
@Enable = enable
@ScanTime = scantime
@ScanPeriod = scanperiod
@ScanVirus = scanvirus
@ScanRisk = scanrisk
@ScanVul = scanvul
@All = all
@Images = images
end
def deserialize(params)
@Enable = params['Enable']
@ScanTime = params['ScanTime']
@ScanPeriod = params['ScanPeriod']
@ScanVirus = params['ScanVirus']
@ScanRisk = params['ScanRisk']
@ScanVul = params['ScanVul']
@All = params['All']
@Images = params['Images']
end
end
# CreateAssetImageScanSetting返回参数结构体
class CreateAssetImageScanSettingResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# CreateAssetImageScanTask请求参数结构体
class CreateAssetImageScanTaskRequest < TencentCloud::Common::AbstractModel
# @param All: 是否扫描全部镜像；全部镜像，镜像列表和根据过滤条件筛选三选一。
# @type All: Boolean
# @param Images: 需要扫描的镜像列表；全部镜像，镜像列表和根据过滤条件筛选三选一。
# @type Images: Array
# @param ScanVul: 扫描漏洞；漏洞，木马和风险需选其一
# @type ScanVul: Boolean
# @param ScanVirus: 扫描木马；漏洞，木马和风险需选其一
# @type ScanVirus: Boolean
# @param ScanRisk: 扫描风险；漏洞，木马和风险需选其一
# @type ScanRisk: Boolean
# @param Filters: 根据过滤条件筛选出镜像；全部镜像，镜像列表和根据过滤条件筛选三选一。
# @type Filters: Array
# @param ExcludeImageIds: 根据过滤条件筛选出镜像，再排除个别镜像
# @type ExcludeImageIds: Array
attr_accessor :All, :Images, :ScanVul, :ScanVirus, :ScanRisk, :Filters, :ExcludeImageIds
def initialize(all=nil, images=nil, scanvul=nil, scanvirus=nil, scanrisk=nil, filters=nil, excludeimageids=nil)
@All = all
@Images = images
@ScanVul = scanvul
@ScanVirus = scanvirus
@ScanRisk = scanrisk
@Filters = filters
@ExcludeImageIds = excludeimageids
end
def deserialize(params)
@All = params['All']
@Images = params['Images']
@ScanVul = params['ScanVul']
@ScanVirus = params['ScanVirus']
@ScanRisk = params['ScanRisk']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
assetfilters_tmp = AssetFilters.new
assetfilters_tmp.deserialize(i)
@Filters << assetfilters_tmp
end
end
@ExcludeImageIds = params['ExcludeImageIds']
end
end
# CreateAssetImageScanTask返回参数结构体
class CreateAssetImageScanTaskResponse < TencentCloud::Common::AbstractModel
# @param TaskID: 任务id
# @type TaskID: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TaskID, :RequestId
def initialize(taskid=nil, requestid=nil)
@TaskID = taskid
@RequestId = requestid
end
def deserialize(params)
@TaskID = params['TaskID']
@RequestId = params['RequestId']
end
end
# CreateCheckComponent请求参数结构体
class CreateCheckComponentRequest < TencentCloud::Common::AbstractModel
# @param ClusterInfoList: 要安装的集群列表信息
# @type ClusterInfoList: Array
attr_accessor :ClusterInfoList
def initialize(clusterinfolist=nil)
@ClusterInfoList = clusterinfolist
end
def deserialize(params)
unless params['ClusterInfoList'].nil?
@ClusterInfoList = []
params['ClusterInfoList'].each do |i|
clustercreatecomponentitem_tmp = ClusterCreateComponentItem.new
clustercreatecomponentitem_tmp.deserialize(i)
@ClusterInfoList << clustercreatecomponentitem_tmp
end
end
end
end
# CreateCheckComponent返回参数结构体
class CreateCheckComponentResponse < TencentCloud::Common::AbstractModel
# @param InstallResult: "InstallSucc"表示安装成功，"InstallFailed"表示安装失败
# @type InstallResult: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :InstallResult, :RequestId
def initialize(installresult=nil, requestid=nil)
@InstallResult = installresult
@RequestId = requestid
end
def deserialize(params)
@InstallResult = params['InstallResult']
@RequestId = params['RequestId']
end
end
# CreateClusterCheckTask请求参数结构体
class CreateClusterCheckTaskRequest < TencentCloud::Common::AbstractModel
# @param ClusterCheckTaskList: 指定要扫描的集群信息
# @type ClusterCheckTaskList: Array
attr_accessor :ClusterCheckTaskList
def initialize(clusterchecktasklist=nil)
@ClusterCheckTaskList = clusterchecktasklist
end
def deserialize(params)
unless params['ClusterCheckTaskList'].nil?
@ClusterCheckTaskList = []
params['ClusterCheckTaskList'].each do |i|
clusterchecktaskitem_tmp = ClusterCheckTaskItem.new
clusterchecktaskitem_tmp.deserialize(i)
@ClusterCheckTaskList << clusterchecktaskitem_tmp
end
end
end
end
# CreateClusterCheckTask返回参数结构体
class CreateClusterCheckTaskResponse < TencentCloud::Common::AbstractModel
# @param TaskId: 返回创建的集群检查任务的ID，为0表示创建失败。
# @type TaskId: Integer
# @param CreateResult: 创建检查任务的结果，"Succ"为成功，其他的为失败原因
# @type CreateResult: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TaskId, :CreateResult, :RequestId
def initialize(taskid=nil, createresult=nil, requestid=nil)
@TaskId = taskid
@CreateResult = createresult
@RequestId = requestid
end
def deserialize(params)
@TaskId = params['TaskId']
@CreateResult = params['CreateResult']
@RequestId = params['RequestId']
end
end
# CreateComplianceTask请求参数结构体
class CreateComplianceTaskRequest < TencentCloud::Common::AbstractModel
# @param AssetTypeSet: 指定要扫描的资产类型列表。
# ASSET_CONTAINER, 容器
# ASSET_IMAGE, 镜像
# ASSET_HOST, 主机
# ASSET_K8S, K8S资产
# AssetTypeSet, PolicySetId, PeriodTaskId三个参数，必须要给其中一个参数填写有效的值。
# @type AssetTypeSet: Array
# @param PolicySetId: 按照策略集ID指定的策略执行合规检查。
# @type PolicySetId: Integer
# @param PeriodTaskId: 按照定时任务ID指定的策略执行合规检查。
# @type PeriodTaskId: Integer
attr_accessor :AssetTypeSet, :PolicySetId, :PeriodTaskId
def initialize(assettypeset=nil, policysetid=nil, periodtaskid=nil)
@AssetTypeSet = assettypeset
@PolicySetId = policysetid
@PeriodTaskId = periodtaskid
end
def deserialize(params)
@AssetTypeSet = params['AssetTypeSet']
@PolicySetId = params['PolicySetId']
@PeriodTaskId = params['PeriodTaskId']
end
end
# CreateComplianceTask返回参数结构体
class CreateComplianceTaskResponse < TencentCloud::Common::AbstractModel
# @param TaskId: 返回创建的合规检查任务的ID。
# @type TaskId: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TaskId, :RequestId
def initialize(taskid=nil, requestid=nil)
@TaskId = taskid
@RequestId = requestid
end
def deserialize(params)
@TaskId = params['TaskId']
@RequestId = params['RequestId']
end
end
# CreateExportComplianceStatusListJob请求参数结构体
class CreateExportComplianceStatusListJobRequest < TencentCloud::Common::AbstractModel
# @param AssetType: 要导出信息的资产类型
# @type AssetType: String
# @param ExportByAsset: 按照检测项导出，还是按照资产导出。true: 按照资产导出；false: 按照检测项导出。
# @type ExportByAsset: Boolean
# @param ExportAll: true, 全部导出；false, 根据IdList来导出数据。
# @type ExportAll: Boolean
# @param IdList: 要导出的资产ID列表或检测项ID列表，由ExportByAsset的取值决定。
# @type IdList: Array
attr_accessor :AssetType, :ExportByAsset, :ExportAll, :IdList
def initialize(assettype=nil, exportbyasset=nil, exportall=nil, idlist=nil)
@AssetType = assettype
@ExportByAsset = exportbyasset
@ExportAll = exportall
@IdList = idlist
end
def deserialize(params)
@AssetType = params['AssetType']
@ExportByAsset = params['ExportByAsset']
@ExportAll = params['ExportAll']
@IdList = params['IdList']
end
end
# CreateExportComplianceStatusListJob返回参数结构体
class CreateExportComplianceStatusListJobResponse < TencentCloud::Common::AbstractModel
# @param JobId: 返回创建的导出任务的ID
# 注意：此字段可能返回 null，表示取不到有效值。
# @type JobId: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :JobId, :RequestId
def initialize(jobid=nil, requestid=nil)
@JobId = jobid
@RequestId = requestid
end
def deserialize(params)
@JobId = params['JobId']
@RequestId = params['RequestId']
end
end
# CreateOrModifyPostPayCores请求参数结构体
class CreateOrModifyPostPayCoresRequest < TencentCloud::Common::AbstractModel
# @param CoresCnt: 弹性计费上限，最小值500
# @type CoresCnt: Integer
attr_accessor :CoresCnt
def initialize(corescnt=nil)
@CoresCnt = corescnt
end
def deserialize(params)
@CoresCnt = params['CoresCnt']
end
end
# CreateOrModifyPostPayCores返回参数结构体
class CreateOrModifyPostPayCoresResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# CreateRefreshTask请求参数结构体
class CreateRefreshTaskRequest < TencentCloud::Common::AbstractModel
def initialize()
end
def deserialize(params)
end
end
# CreateRefreshTask返回参数结构体
class CreateRefreshTaskResponse < TencentCloud::Common::AbstractModel
# @param TaskId: 返回创建的集群检查任务的ID，为0表示创建失败。
# @type TaskId: Integer
# @param CreateResult: 创建检查任务的结果，"Succ"为成功，"Failed"为失败
# @type CreateResult: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TaskId, :CreateResult, :RequestId
def initialize(taskid=nil, createresult=nil, requestid=nil)
@TaskId = taskid
@CreateResult = createresult
@RequestId = requestid
end
def deserialize(params)
@TaskId = params['TaskId']
@CreateResult = params['CreateResult']
@RequestId = params['RequestId']
end
end
# CreateVirusScanAgain请求参数结构体
class CreateVirusScanAgainRequest < TencentCloud::Common::AbstractModel
# @param TaskId: 任务id
# @type TaskId: String
# @param ContainerIds: 需要扫描的容器id集合
# @type ContainerIds: Array
# @param TimeoutAll: 是否是扫描全部超时的
# @type TimeoutAll: Boolean
# @param Timeout: 重新设置的超时时长
# @type Timeout: Integer
attr_accessor :TaskId, :ContainerIds, :TimeoutAll, :Timeout
def initialize(taskid=nil, containerids=nil, timeoutall=nil, timeout=nil)
@TaskId = taskid
@ContainerIds = containerids
@TimeoutAll = timeoutall
@Timeout = timeout
end
def deserialize(params)
@TaskId = params['TaskId']
@ContainerIds = params['ContainerIds']
@TimeoutAll = params['TimeoutAll']
@Timeout = params['Timeout']
end
end
# CreateVirusScanAgain返回参数结构体
class CreateVirusScanAgainResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# CreateVirusScanTask请求参数结构体
class CreateVirusScanTaskRequest < TencentCloud::Common::AbstractModel
# @param ScanPathAll: 是否扫描所有路径
# @type ScanPathAll: Boolean
# @param ScanRangeType: 扫描范围0容器1主机节点
# @type ScanRangeType: Integer
# @param ScanRangeAll: true 全选，false 自选
# @type ScanRangeAll: Boolean
# @param Timeout: 超时时长，单位小时
# @type Timeout: Integer
# @param ScanPathType: 当ScanPathAll为false生效 0扫描以下路径 1、扫描除以下路径
# @type ScanPathType: Integer
# @param ScanIds: 自选扫描范围的容器id或者主机id 根据ScanRangeType决定
# @type ScanIds: Array
# @param ScanPath: 自选排除或扫描的地址
# @type ScanPath: Array
attr_accessor :ScanPathAll, :ScanRangeType, :ScanRangeAll, :Timeout, :ScanPathType, :ScanIds, :ScanPath
def initialize(scanpathall=nil, scanrangetype=nil, scanrangeall=nil, timeout=nil, scanpathtype=nil, scanids=nil, scanpath=nil)
@ScanPathAll = scanpathall
@ScanRangeType = scanrangetype
@ScanRangeAll = scanrangeall
@Timeout = timeout
@ScanPathType = scanpathtype
@ScanIds = scanids
@ScanPath = scanpath
end
def deserialize(params)
@ScanPathAll = params['ScanPathAll']
@ScanRangeType = params['ScanRangeType']
@ScanRangeAll = params['ScanRangeAll']
@Timeout = params['Timeout']
@ScanPathType = params['ScanPathType']
@ScanIds = params['ScanIds']
@ScanPath = params['ScanPath']
end
end
# CreateVirusScanTask返回参数结构体
class CreateVirusScanTaskResponse < TencentCloud::Common::AbstractModel
# @param TaskID: 任务id
# @type TaskID: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TaskID, :RequestId
def initialize(taskid=nil, requestid=nil)
@TaskID = taskid
@RequestId = requestid
end
def deserialize(params)
@TaskID = params['TaskID']
@RequestId = params['RequestId']
end
end
# DeleteAbnormalProcessRules请求参数结构体
class DeleteAbnormalProcessRulesRequest < TencentCloud::Common::AbstractModel
# @param RuleIdSet: 策略的ids
# @type RuleIdSet: Array
attr_accessor :RuleIdSet
def initialize(ruleidset=nil)
@RuleIdSet = ruleidset
end
def deserialize(params)
@RuleIdSet = params['RuleIdSet']
end
end
# DeleteAbnormalProcessRules返回参数结构体
class DeleteAbnormalProcessRulesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteAccessControlRules请求参数结构体
class DeleteAccessControlRulesRequest < TencentCloud::Common::AbstractModel
# @param RuleIdSet: 策略的ids
# @type RuleIdSet: Array
attr_accessor :RuleIdSet
def initialize(ruleidset=nil)
@RuleIdSet = ruleidset
end
def deserialize(params)
@RuleIdSet = params['RuleIdSet']
end
end
# DeleteAccessControlRules返回参数结构体
class DeleteAccessControlRulesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteCompliancePolicyItemFromWhitelist请求参数结构体
class DeleteCompliancePolicyItemFromWhitelistRequest < TencentCloud::Common::AbstractModel
# @param WhitelistIdSet: 指定的白名单项的ID的列表
# @type WhitelistIdSet: Array
attr_accessor :WhitelistIdSet
def initialize(whitelistidset=nil)
@WhitelistIdSet = whitelistidset
end
def deserialize(params)
@WhitelistIdSet = params['WhitelistIdSet']
end
end
# DeleteCompliancePolicyItemFromWhitelist返回参数结构体
class DeleteCompliancePolicyItemFromWhitelistResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteReverseShellWhiteLists请求参数结构体
class DeleteReverseShellWhiteListsRequest < TencentCloud::Common::AbstractModel
# @param WhiteListIdSet: 白名单ids
# @type WhiteListIdSet: Array
attr_accessor :WhiteListIdSet
def initialize(whitelistidset=nil)
@WhiteListIdSet = whitelistidset
end
def deserialize(params)
@WhiteListIdSet = params['WhiteListIdSet']
end
end
# DeleteReverseShellWhiteLists返回参数结构体
class DeleteReverseShellWhiteListsResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteRiskSyscallWhiteLists请求参数结构体
class DeleteRiskSyscallWhiteListsRequest < TencentCloud::Common::AbstractModel
# @param WhiteListIdSet: 白名单ids
# @type WhiteListIdSet: Array
attr_accessor :WhiteListIdSet
def initialize(whitelistidset=nil)
@WhiteListIdSet = whitelistidset
end
def deserialize(params)
@WhiteListIdSet = params['WhiteListIdSet']
end
end
# DeleteRiskSyscallWhiteLists返回参数结构体
class DeleteRiskSyscallWhiteListsResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DescribeAbnormalProcessDetail请求参数结构体
class DescribeAbnormalProcessDetailRequest < TencentCloud::Common::AbstractModel
# @param EventId: 事件唯一id
# @type EventId: String
attr_accessor :EventId
def initialize(eventid=nil)
@EventId = eventid
end
def deserialize(params)
@EventId = params['EventId']
end
end
# DescribeAbnormalProcessDetail返回参数结构体
class DescribeAbnormalProcessDetailResponse < TencentCloud::Common::AbstractModel
# @param EventBaseInfo: 事件基本信息
# @type EventBaseInfo: :class:`Tencentcloud::Tcss.v20201101.models.RunTimeEventBaseInfo`
# @param ProcessInfo: 进程信息
# @type ProcessInfo: :class:`Tencentcloud::Tcss.v20201101.models.ProcessDetailInfo`
# @param ParentProcessInfo: 父进程信息
# @type ParentProcessInfo: :class:`Tencentcloud::Tcss.v20201101.models.ProcessDetailBaseInfo`
# @param EventDetail: 事件描述
# @type EventDetail: :class:`Tencentcloud::Tcss.v20201101.models.AbnormalProcessEventDescription`
# @param AncestorProcessInfo: 祖先进程信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AncestorProcessInfo: :class:`Tencentcloud::Tcss.v20201101.models.ProcessBaseInfo`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :EventBaseInfo, :ProcessInfo, :ParentProcessInfo, :EventDetail, :AncestorProcessInfo, :RequestId
def initialize(eventbaseinfo=nil, processinfo=nil, parentprocessinfo=nil, eventdetail=nil, ancestorprocessinfo=nil, requestid=nil)
@EventBaseInfo = eventbaseinfo
@ProcessInfo = processinfo
@ParentProcessInfo = parentprocessinfo
@EventDetail = eventdetail
@AncestorProcessInfo = ancestorprocessinfo
@RequestId = requestid
end
def deserialize(params)
unless params['EventBaseInfo'].nil?
@EventBaseInfo = RunTimeEventBaseInfo.new
@EventBaseInfo.deserialize(params['EventBaseInfo'])
end
unless params['ProcessInfo'].nil?
@ProcessInfo = ProcessDetailInfo.new
@ProcessInfo.deserialize(params['ProcessInfo'])
end
unless params['ParentProcessInfo'].nil?
@ParentProcessInfo = ProcessDetailBaseInfo.new
@ParentProcessInfo.deserialize(params['ParentProcessInfo'])
end
unless params['EventDetail'].nil?
@EventDetail = AbnormalProcessEventDescription.new
@EventDetail.deserialize(params['EventDetail'])
end
unless params['AncestorProcessInfo'].nil?
@AncestorProcessInfo = ProcessBaseInfo.new
@AncestorProcessInfo.deserialize(params['AncestorProcessInfo'])
end
@RequestId = params['RequestId']
end
end
# DescribeAbnormalProcessEventsExport请求参数结构体
class DescribeAbnormalProcessEventsExportRequest < TencentCloud::Common::AbstractModel
# @param ExportField: 导出字段
# @type ExportField: Array
# @param Limit: 需要返回的数量，默认为10，最大值为100
# @type Limit: Integer
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
# @param Filters: 过滤参数,"Filters":[{"Name":"Status","Values":["2"]}]
# @type Filters: Array
# @param Order: 升序降序,asc desc
# @type Order: String
# @param By: 排序字段
# @type By: String
attr_accessor :ExportField, :Limit, :Offset, :Filters, :Order, :By
def initialize(exportfield=nil, limit=nil, offset=nil, filters=nil, order=nil, by=nil)
@ExportField = exportfield
@Limit = limit
@Offset = offset
@Filters = filters
@Order = order
@By = by
end
def deserialize(params)
@ExportField = params['ExportField']
@Limit = params['Limit']
@Offset = params['Offset']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
runtimefilters_tmp = RunTimeFilters.new
runtimefilters_tmp.deserialize(i)
@Filters << runtimefilters_tmp
end
end
@Order = params['Order']
@By = params['By']
end
end
# DescribeAbnormalProcessEventsExport返回参数结构体
class DescribeAbnormalProcessEventsExportResponse < TencentCloud::Common::AbstractModel
# @param DownloadUrl: execle下载地址
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DownloadUrl: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :DownloadUrl, :RequestId
def initialize(downloadurl=nil, requestid=nil)
@DownloadUrl = downloadurl
@RequestId = requestid
end
def deserialize(params)
@DownloadUrl = params['DownloadUrl']
@RequestId = params['RequestId']
end
end
# DescribeAbnormalProcessEvents请求参数结构体
class DescribeAbnormalProcessEventsRequest < TencentCloud::Common::AbstractModel
# @param Limit: 需要返回的数量，默认为10，最大值为100
# @type Limit: Integer
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
# @param Filters: 过滤参数,"Filters":[{"Name":"Status","Values":["2"]}]
# @type Filters: Array
# @param Order: 升序降序,asc desc
# @type Order: String
# @param By: 排序字段
# @type By: String
attr_accessor :Limit, :Offset, :Filters, :Order, :By
def initialize(limit=nil, offset=nil, filters=nil, order=nil, by=nil)
@Limit = limit
@Offset = offset
@Filters = filters
@Order = order
@By = by
end
def deserialize(params)
@Limit = params['Limit']
@Offset = params['Offset']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
runtimefilters_tmp = RunTimeFilters.new
runtimefilters_tmp.deserialize(i)
@Filters << runtimefilters_tmp
end
end
@Order = params['Order']
@By = params['By']
end
end
# DescribeAbnormalProcessEvents返回参数结构体
class DescribeAbnormalProcessEventsResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 事件总数量
# @type TotalCount: Integer
# @param EventSet: 异常进程数组
# @type EventSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :EventSet, :RequestId
def initialize(totalcount=nil, eventset=nil, requestid=nil)
@TotalCount = totalcount
@EventSet = eventset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['EventSet'].nil?
@EventSet = []
params['EventSet'].each do |i|
abnormalprocesseventinfo_tmp = AbnormalProcessEventInfo.new
abnormalprocesseventinfo_tmp.deserialize(i)
@EventSet << abnormalprocesseventinfo_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeAbnormalProcessRuleDetail请求参数结构体
class DescribeAbnormalProcessRuleDetailRequest < TencentCloud::Common::AbstractModel
# @param RuleId: 策略唯一id
# @type RuleId: String
# @param ImageId: 镜像id, 在添加白名单的时候使用
# @type ImageId: String
# @param Limit: 需要返回的数量，默认为10，最大值为100
# @type Limit: Integer
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
attr_accessor :RuleId, :ImageId, :Limit, :Offset
def initialize(ruleid=nil, imageid=nil, limit=nil, offset=nil)
@RuleId = ruleid
@ImageId = imageid
@Limit = limit
@Offset = offset
end
def deserialize(params)
@RuleId = params['RuleId']
@ImageId = params['ImageId']
@Limit = params['Limit']
@Offset = params['Offset']
end
end
# DescribeAbnormalProcessRuleDetail返回参数结构体
class DescribeAbnormalProcessRuleDetailResponse < TencentCloud::Common::AbstractModel
# @param RuleDetail: 异常进程策略详细信息
# @type RuleDetail: :class:`Tencentcloud::Tcss.v20201101.models.AbnormalProcessRuleInfo`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RuleDetail, :RequestId
def initialize(ruledetail=nil, requestid=nil)
@RuleDetail = ruledetail
@RequestId = requestid
end
def deserialize(params)
unless params['RuleDetail'].nil?
@RuleDetail = AbnormalProcessRuleInfo.new
@RuleDetail.deserialize(params['RuleDetail'])
end
@RequestId = params['RequestId']
end
end
# DescribeAbnormalProcessRulesExport请求参数结构体
class DescribeAbnormalProcessRulesExportRequest < TencentCloud::Common::AbstractModel
# @param ExportField: 导出字段
# @type ExportField: Array
# @param Limit: 需要返回的数量，默认为10，最大值为100
# @type Limit: Integer
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
# @param Filters: 过滤参数,"Filters":[{"Name":"Status","Values":["2"]}]
# @type Filters: Array
# @param Order: 升序降序,asc desc
# @type Order: String
# @param By: 排序字段
# @type By: String
attr_accessor :ExportField, :Limit, :Offset, :Filters, :Order, :By
def initialize(exportfield=nil, limit=nil, offset=nil, filters=nil, order=nil, by=nil)
@ExportField = exportfield
@Limit = limit
@Offset = offset
@Filters = filters
@Order = order
@By = by
end
def deserialize(params)
@ExportField = params['ExportField']
@Limit = params['Limit']
@Offset = params['Offset']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
runtimefilters_tmp = RunTimeFilters.new
runtimefilters_tmp.deserialize(i)
@Filters << runtimefilters_tmp
end
end
@Order = params['Order']
@By = params['By']
end
end
# DescribeAbnormalProcessRulesExport返回参数结构体
class DescribeAbnormalProcessRulesExportResponse < TencentCloud::Common::AbstractModel
# @param DownloadUrl: execle下载地址
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DownloadUrl: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :DownloadUrl, :RequestId
def initialize(downloadurl=nil, requestid=nil)
@DownloadUrl = downloadurl
@RequestId = requestid
end
def deserialize(params)
@DownloadUrl = params['DownloadUrl']
@RequestId = params['RequestId']
end
end
# DescribeAbnormalProcessRules请求参数结构体
class DescribeAbnormalProcessRulesRequest < TencentCloud::Common::AbstractModel
# @param Limit: 需要返回的数量，默认为10，最大值为100
# @type Limit: Integer
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
# @param Filters: 过滤参数,"Filters":[{"Name":"Status","Values":["2"]}]
# @type Filters: Array
# @param Order: 升序降序,asc desc
# @type Order: String
# @param By: 排序字段
# @type By: String
attr_accessor :Limit, :Offset, :Filters, :Order, :By
def initialize(limit=nil, offset=nil, filters=nil, order=nil, by=nil)
@Limit = limit
@Offset = offset
@Filters = filters
@Order = order
@By = by
end
def deserialize(params)
@Limit = params['Limit']
@Offset = params['Offset']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
runtimefilters_tmp = RunTimeFilters.new
runtimefilters_tmp.deserialize(i)
@Filters << runtimefilters_tmp
end
end
@Order = params['Order']
@By = params['By']
end
end
# DescribeAbnormalProcessRules返回参数结构体
class DescribeAbnormalProcessRulesResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 事件总数量
# @type TotalCount: Integer
# @param RuleSet: 异常进程策略信息列表
# @type RuleSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :RuleSet, :RequestId
def initialize(totalcount=nil, ruleset=nil, requestid=nil)
@TotalCount = totalcount
@RuleSet = ruleset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['RuleSet'].nil?
@RuleSet = []
params['RuleSet'].each do |i|
rulebaseinfo_tmp = RuleBaseInfo.new
rulebaseinfo_tmp.deserialize(i)
@RuleSet << rulebaseinfo_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeAccessControlDetail请求参数结构体
class DescribeAccessControlDetailRequest < TencentCloud::Common::AbstractModel
# @param EventId: 事件唯一id
# @type EventId: String
attr_accessor :EventId
def initialize(eventid=nil)
@EventId = eventid
end
def deserialize(params)
@EventId = params['EventId']
end
end
# DescribeAccessControlDetail返回参数结构体
class DescribeAccessControlDetailResponse < TencentCloud::Common::AbstractModel
# @param EventBaseInfo: 事件基本信息
# @type EventBaseInfo: :class:`Tencentcloud::Tcss.v20201101.models.RunTimeEventBaseInfo`
# @param ProcessInfo: 进程信息
# @type ProcessInfo: :class:`Tencentcloud::Tcss.v20201101.models.ProcessDetailInfo`
# @param TamperedFileInfo: 被篡改信息
# @type TamperedFileInfo: :class:`Tencentcloud::Tcss.v20201101.models.FileAttributeInfo`
# @param EventDetail: 事件描述
# @type EventDetail: :class:`Tencentcloud::Tcss.v20201101.models.AccessControlEventDescription`
# @param ParentProcessInfo: 父进程信息
# @type ParentProcessInfo: :class:`Tencentcloud::Tcss.v20201101.models.ProcessBaseInfo`
# @param AncestorProcessInfo: 祖先进程信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AncestorProcessInfo: :class:`Tencentcloud::Tcss.v20201101.models.ProcessBaseInfo`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :EventBaseInfo, :ProcessInfo, :TamperedFileInfo, :EventDetail, :ParentProcessInfo, :AncestorProcessInfo, :RequestId
def initialize(eventbaseinfo=nil, processinfo=nil, tamperedfileinfo=nil, eventdetail=nil, parentprocessinfo=nil, ancestorprocessinfo=nil, requestid=nil)
@EventBaseInfo = eventbaseinfo
@ProcessInfo = processinfo
@TamperedFileInfo = tamperedfileinfo
@EventDetail = eventdetail
@ParentProcessInfo = parentprocessinfo
@AncestorProcessInfo = ancestorprocessinfo
@RequestId = requestid
end
def deserialize(params)
unless params['EventBaseInfo'].nil?
@EventBaseInfo = RunTimeEventBaseInfo.new
@EventBaseInfo.deserialize(params['EventBaseInfo'])
end
unless params['ProcessInfo'].nil?
@ProcessInfo = ProcessDetailInfo.new
@ProcessInfo.deserialize(params['ProcessInfo'])
end
unless params['TamperedFileInfo'].nil?
@TamperedFileInfo = FileAttributeInfo.new
@TamperedFileInfo.deserialize(params['TamperedFileInfo'])
end
unless params['EventDetail'].nil?
@EventDetail = AccessControlEventDescription.new
@EventDetail.deserialize(params['EventDetail'])
end
unless params['ParentProcessInfo'].nil?
@ParentProcessInfo = ProcessBaseInfo.new
@ParentProcessInfo.deserialize(params['ParentProcessInfo'])
end
unless params['AncestorProcessInfo'].nil?
@AncestorProcessInfo = ProcessBaseInfo.new
@AncestorProcessInfo.deserialize(params['AncestorProcessInfo'])
end
@RequestId = params['RequestId']
end
end
# DescribeAccessControlEventsExport请求参数结构体
class DescribeAccessControlEventsExportRequest < TencentCloud::Common::AbstractModel
# @param ExportField: 导出字段
# @type ExportField: Array
# @param Limit: 需要返回的数量，默认为10，最大值为100
# @type Limit: Integer
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
# @param Filters: 过滤参数,"Filters":[{"Name":"Status","Values":["2"]}]
# @type Filters: Array
# @param Order: 升序降序,asc desc
# @type Order: String
# @param By: 排序字段
# @type By: String
attr_accessor :ExportField, :Limit, :Offset, :Filters, :Order, :By
def initialize(exportfield=nil, limit=nil, offset=nil, filters=nil, order=nil, by=nil)
@ExportField = exportfield
@Limit = limit
@Offset = offset
@Filters = filters
@Order = order
@By = by
end
def deserialize(params)
@ExportField = params['ExportField']
@Limit = params['Limit']
@Offset = params['Offset']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
runtimefilters_tmp = RunTimeFilters.new
runtimefilters_tmp.deserialize(i)
@Filters << runtimefilters_tmp
end
end
@Order = params['Order']
@By = params['By']
end
end
# DescribeAccessControlEventsExport返回参数结构体
class DescribeAccessControlEventsExportResponse < TencentCloud::Common::AbstractModel
# @param DownloadUrl: execle下载地址
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DownloadUrl: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :DownloadUrl, :RequestId
def initialize(downloadurl=nil, requestid=nil)
@DownloadUrl = downloadurl
@RequestId = requestid
end
def deserialize(params)
@DownloadUrl = params['DownloadUrl']
@RequestId = params['RequestId']
end
end
# DescribeAccessControlEvents请求参数结构体
class DescribeAccessControlEventsRequest < TencentCloud::Common::AbstractModel
# @param Limit: 需要返回的数量，默认为10，最大值为100
# @type Limit: Integer
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
# @param Filters: 过滤参数,"Filters":[{"Name":"Status","Values":["2"]}]
# @type Filters: Array
# @param Order: 升序降序,asc desc
# @type Order: String
# @param By: 排序字段
# @type By: String
attr_accessor :Limit, :Offset, :Filters, :Order, :By
def initialize(limit=nil, offset=nil, filters=nil, order=nil, by=nil)
@Limit = limit
@Offset = offset
@Filters = filters
@Order = order
@By = by
end
def deserialize(params)
@Limit = params['Limit']
@Offset = params['Offset']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
runtimefilters_tmp = RunTimeFilters.new
runtimefilters_tmp.deserialize(i)
@Filters << runtimefilters_tmp
end
end
@Order = params['Order']
@By = params['By']
end
end
# DescribeAccessControlEvents返回参数结构体
class DescribeAccessControlEventsResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 事件总数量
# @type TotalCount: Integer
# @param EventSet: 访问控制事件数组
# @type EventSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :EventSet, :RequestId
def initialize(totalcount=nil, eventset=nil, requestid=nil)
@TotalCount = totalcount
@EventSet = eventset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['EventSet'].nil?
@EventSet = []
params['EventSet'].each do |i|
accesscontroleventinfo_tmp = AccessControlEventInfo.new
accesscontroleventinfo_tmp.deserialize(i)
@EventSet << accesscontroleventinfo_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeAccessControlRuleDetail请求参数结构体
class DescribeAccessControlRuleDetailRequest < TencentCloud::Common::AbstractModel
# @param RuleId: 策略唯一id
# @type RuleId: String
# @param ImageId: 镜像id, 仅仅在事件加白的时候使用
# @type ImageId: String
# @param Limit: 需要返回的数量，默认为10，最大值为100
# @type Limit: Integer
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
attr_accessor :RuleId, :ImageId, :Limit, :Offset
def initialize(ruleid=nil, imageid=nil, limit=nil, offset=nil)
@RuleId = ruleid
@ImageId = imageid
@Limit = limit
@Offset = offset
end
def deserialize(params)
@RuleId = params['RuleId']
@ImageId = params['ImageId']
@Limit = params['Limit']
@Offset = params['Offset']
end
end
# DescribeAccessControlRuleDetail返回参数结构体
class DescribeAccessControlRuleDetailResponse < TencentCloud::Common::AbstractModel
# @param RuleDetail: 运行时策略详细信息
# @type RuleDetail: :class:`Tencentcloud::Tcss.v20201101.models.AccessControlRuleInfo`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RuleDetail, :RequestId
def initialize(ruledetail=nil, requestid=nil)
@RuleDetail = ruledetail
@RequestId = requestid
end
def deserialize(params)
unless params['RuleDetail'].nil?
@RuleDetail = AccessControlRuleInfo.new
@RuleDetail.deserialize(params['RuleDetail'])
end
@RequestId = params['RequestId']
end
end
# DescribeAccessControlRulesExport请求参数结构体
class DescribeAccessControlRulesExportRequest < TencentCloud::Common::AbstractModel
# @param ExportField: 导出字段
# @type ExportField: Array
# @param Limit: 需要返回的数量，默认为10，最大值为100
# @type Limit: Integer
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
# @param Filters: 过滤参数,"Filters":[{"Name":"Status","Values":["2"]}]
# @type Filters: Array
# @param Order: 升序降序,asc desc
# @type Order: String
# @param By: 排序字段
# @type By: String
attr_accessor :ExportField, :Limit, :Offset, :Filters, :Order, :By
def initialize(exportfield=nil, limit=nil, offset=nil, filters=nil, order=nil, by=nil)
@ExportField = exportfield
@Limit = limit
@Offset = offset
@Filters = filters
@Order = order
@By = by
end
def deserialize(params)
@ExportField = params['ExportField']
@Limit = params['Limit']
@Offset = params['Offset']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
runtimefilters_tmp = RunTimeFilters.new
runtimefilters_tmp.deserialize(i)
@Filters << runtimefilters_tmp
end
end
@Order = params['Order']
@By = params['By']
end
end
# DescribeAccessControlRulesExport返回参数结构体
class DescribeAccessControlRulesExportResponse < TencentCloud::Common::AbstractModel
# @param DownloadUrl: execle下载地址
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DownloadUrl: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :DownloadUrl, :RequestId
def initialize(downloadurl=nil, requestid=nil)
@DownloadUrl = downloadurl
@RequestId = requestid
end
def deserialize(params)
@DownloadUrl = params['DownloadUrl']
@RequestId = params['RequestId']
end
end
# DescribeAccessControlRules请求参数结构体
class DescribeAccessControlRulesRequest < TencentCloud::Common::AbstractModel
# @param Limit: 需要返回的数量，默认为10，最大值为100
# @type Limit: Integer
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
# @param Filters: 过滤参数,"Filters":[{"Name":"Status","Values":["2"]}]
# @type Filters: Array
# @param Order: 升序降序,asc desc
# @type Order: String
# @param By: 排序字段
# @type By: String
attr_accessor :Limit, :Offset, :Filters, :Order, :By
def initialize(limit=nil, offset=nil, filters=nil, order=nil, by=nil)
@Limit = limit
@Offset = offset
@Filters = filters
@Order = order
@By = by
end
def deserialize(params)
@Limit = params['Limit']
@Offset = params['Offset']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
runtimefilters_tmp = RunTimeFilters.new
runtimefilters_tmp.deserialize(i)
@Filters << runtimefilters_tmp
end
end
@Order = params['Order']
@By = params['By']
end
end
# DescribeAccessControlRules返回参数结构体
class DescribeAccessControlRulesResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 事件总数量
# @type TotalCount: Integer
# @param RuleSet: 访问控制策略信息列表
# @type RuleSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :RuleSet, :RequestId
def initialize(totalcount=nil, ruleset=nil, requestid=nil)
@TotalCount = totalcount
@RuleSet = ruleset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['RuleSet'].nil?
@RuleSet = []
params['RuleSet'].each do |i|
rulebaseinfo_tmp = RuleBaseInfo.new
rulebaseinfo_tmp.deserialize(i)
@RuleSet << rulebaseinfo_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeAffectedClusterCount请求参数结构体
class DescribeAffectedClusterCountRequest < TencentCloud::Common::AbstractModel
def initialize()
end
def deserialize(params)
end
end
# DescribeAffectedClusterCount返回参数结构体
class DescribeAffectedClusterCountResponse < TencentCloud::Common::AbstractModel
# @param SeriousRiskClusterCount: 严重风险的集群数量
# @type SeriousRiskClusterCount: Integer
# @param HighRiskClusterCount: 高危风险的集群数量
# @type HighRiskClusterCount: Integer
# @param MiddleRiskClusterCount: 中危风险的集群数量
# @type MiddleRiskClusterCount: Integer
# @param HintRiskClusterCount: 低危风险的集群数量
# @type HintRiskClusterCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :SeriousRiskClusterCount, :HighRiskClusterCount, :MiddleRiskClusterCount, :HintRiskClusterCount, :RequestId
def initialize(seriousriskclustercount=nil, highriskclustercount=nil, middleriskclustercount=nil, hintriskclustercount=nil, requestid=nil)
@SeriousRiskClusterCount = seriousriskclustercount
@HighRiskClusterCount = highriskclustercount
@MiddleRiskClusterCount = middleriskclustercount
@HintRiskClusterCount = hintriskclustercount
@RequestId = requestid
end
def deserialize(params)
@SeriousRiskClusterCount = params['SeriousRiskClusterCount']
@HighRiskClusterCount = params['HighRiskClusterCount']
@MiddleRiskClusterCount = params['MiddleRiskClusterCount']
@HintRiskClusterCount = params['HintRiskClusterCount']
@RequestId = params['RequestId']
end
end
# DescribeAffectedNodeList请求参数结构体
class DescribeAffectedNodeListRequest < TencentCloud::Common::AbstractModel
# @param CheckItemId: 唯一的检测项的ID
# @type CheckItemId: Integer
# @param Offset: 偏移量
# @type Offset: Integer
# @param Limit: 每次查询的最大记录数量
# @type Limit: Integer
# @param Filters: Name - String
# Name 可取值：ClusterName, ClusterId,InstanceId,PrivateIpAddresses
# @type Filters: Array
# @param By: 排序字段
# @type By: String
# @param Order: 排序方式 asc,desc
# @type Order: String
attr_accessor :CheckItemId, :Offset, :Limit, :Filters, :By, :Order
def initialize(checkitemid=nil, offset=nil, limit=nil, filters=nil, by=nil, order=nil)
@CheckItemId = checkitemid
@Offset = offset
@Limit = limit
@Filters = filters
@By = by
@Order = order
end
def deserialize(params)
@CheckItemId = params['CheckItemId']
@Offset = params['Offset']
@Limit = params['Limit']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
compliancefilters_tmp = ComplianceFilters.new
compliancefilters_tmp.deserialize(i)
@Filters << compliancefilters_tmp
end
end
@By = params['By']
@Order = params['Order']
end
end
# DescribeAffectedNodeList返回参数结构体
class DescribeAffectedNodeListResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 受影响的节点总数
# @type TotalCount: Integer
# @param AffectedNodeList: 受影响的节点列表
# @type AffectedNodeList: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :AffectedNodeList, :RequestId
def initialize(totalcount=nil, affectednodelist=nil, requestid=nil)
@TotalCount = totalcount
@AffectedNodeList = affectednodelist
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['AffectedNodeList'].nil?
@AffectedNodeList = []
params['AffectedNodeList'].each do |i|
affectednodeitem_tmp = AffectedNodeItem.new
affectednodeitem_tmp.deserialize(i)
@AffectedNodeList << affectednodeitem_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeAffectedWorkloadList请求参数结构体
class DescribeAffectedWorkloadListRequest < TencentCloud::Common::AbstractModel
# @param CheckItemId: 唯一的检测项的ID
# @type CheckItemId: Integer
# @param Offset: 偏移量
# @type Offset: Integer
# @param Limit: 每次查询的最大记录数量
# @type Limit: Integer
# @param Filters: Name - String
# Name 可取值：WorkloadType,ClusterId
# @type Filters: Array
# @param By: 排序字段
# @type By: String
# @param Order: 排序方式 asc,desc
# @type Order: String
attr_accessor :CheckItemId, :Offset, :Limit, :Filters, :By, :Order
def initialize(checkitemid=nil, offset=nil, limit=nil, filters=nil, by=nil, order=nil)
@CheckItemId = checkitemid
@Offset = offset
@Limit = limit
@Filters = filters
@By = by
@Order = order
end
def deserialize(params)
@CheckItemId = params['CheckItemId']
@Offset = params['Offset']
@Limit = params['Limit']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
compliancefilters_tmp = ComplianceFilters.new
compliancefilters_tmp.deserialize(i)
@Filters << compliancefilters_tmp
end
end
@By = params['By']
@Order = params['Order']
end
end
# DescribeAffectedWorkloadList返回参数结构体
class DescribeAffectedWorkloadListResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 受影响的workload列表数量
# @type TotalCount: Integer
# @param AffectedWorkloadList: 受影响的workload列表
# @type AffectedWorkloadList: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :AffectedWorkloadList, :RequestId
def initialize(totalcount=nil, affectedworkloadlist=nil, requestid=nil)
@TotalCount = totalcount
@AffectedWorkloadList = affectedworkloadlist
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['AffectedWorkloadList'].nil?
@AffectedWorkloadList = []
params['AffectedWorkloadList'].each do |i|
affectedworkloaditem_tmp = AffectedWorkloadItem.new
affectedworkloaditem_tmp.deserialize(i)
@AffectedWorkloadList << affectedworkloaditem_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeAssetAppServiceList请求参数结构体
class DescribeAssetAppServiceListRequest < TencentCloud::Common::AbstractModel
# @param Limit: 需要返回的数量，默认为10，最大值为100
# @type Limit: Integer
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
# @param Filters: 过滤条件。
# <li>Keywords- String - 是否必填：否 - 模糊查询可选字段</li>
# @type Filters: Array
attr_accessor :Limit, :Offset, :Filters
def initialize(limit=nil, offset=nil, filters=nil)
@Limit = limit
@Offset = offset
@Filters = filters
end
def deserialize(params)
@Limit = params['Limit']
@Offset = params['Offset']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
assetfilters_tmp = AssetFilters.new
assetfilters_tmp.deserialize(i)
@Filters << assetfilters_tmp
end
end
end
end
# DescribeAssetAppServiceList返回参数结构体
class DescribeAssetAppServiceListResponse < TencentCloud::Common::AbstractModel
# @param List: db服务列表
# @type List: Array
# @param TotalCount: 总数量
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :List, :TotalCount, :RequestId
def initialize(list=nil, totalcount=nil, requestid=nil)
@List = list
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['List'].nil?
@List = []
params['List'].each do |i|
serviceinfo_tmp = ServiceInfo.new
serviceinfo_tmp.deserialize(i)
@List << serviceinfo_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeAssetComponentList请求参数结构体
class DescribeAssetComponentListRequest < TencentCloud::Common::AbstractModel
# @param ContainerID: 容器id
# @type ContainerID: String
# @param Limit: 需要返回的数量，默认为10，最大值为100
# @type Limit: Integer
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
# @param Filters: 过滤条件
# @type Filters: Array
attr_accessor :ContainerID, :Limit, :Offset, :Filters
def initialize(containerid=nil, limit=nil, offset=nil, filters=nil)
@ContainerID = containerid
@Limit = limit
@Offset = offset
@Filters = filters
end
def deserialize(params)
@ContainerID = params['ContainerID']
@Limit = params['Limit']
@Offset = params['Offset']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
assetfilters_tmp = AssetFilters.new
assetfilters_tmp.deserialize(i)
@Filters << assetfilters_tmp
end
end
end
end
# DescribeAssetComponentList返回参数结构体
class DescribeAssetComponentListResponse < TencentCloud::Common::AbstractModel
# @param List: 组件列表
# @type List: Array
# @param TotalCount: 总数量
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :List, :TotalCount, :RequestId
def initialize(list=nil, totalcount=nil, requestid=nil)
@List = list
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['List'].nil?
@List = []
params['List'].each do |i|
componentinfo_tmp = ComponentInfo.new
componentinfo_tmp.deserialize(i)
@List << componentinfo_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeAssetContainerDetail请求参数结构体
class DescribeAssetContainerDetailRequest < TencentCloud::Common::AbstractModel
# @param ContainerId: 容器id
# @type ContainerId: String
attr_accessor :ContainerId
def initialize(containerid=nil)
@ContainerId = containerid
end
def deserialize(params)
@ContainerId = params['ContainerId']
end
end
# DescribeAssetContainerDetail返回参数结构体
class DescribeAssetContainerDetailResponse < TencentCloud::Common::AbstractModel
# @param HostID: 主机id
# @type HostID: String
# @param HostIP: 主机ip
# @type HostIP: String
# @param ContainerName: 容器名称
# @type ContainerName: String
# @param Status: 运行状态
# @type Status: String
# @param RunAs: 运行账户
# @type RunAs: String
# @param Cmd: 命令行
# @type Cmd: String
# @param CPUUsage: CPU使用率 * 1000
# @type CPUUsage: Integer
# @param RamUsage: 内存使用 KB
# @type RamUsage: Integer
# @param ImageName: 镜像名
# @type ImageName: String
# @param ImageID: 镜像ID
# @type ImageID: String
# @param POD: 归属POD
# @type POD: String
# @param K8sMaster: k8s 主节点
# @type K8sMaster: String
# @param ProcessCnt: 容器内进程数
# @type ProcessCnt: Integer
# @param PortCnt: 容器内端口数
# @type PortCnt: Integer
# @param ComponentCnt: 组件数
# @type ComponentCnt: Integer
# @param AppCnt: app数
# @type AppCnt: Integer
# @param WebServiceCnt: websvc数
# @type WebServiceCnt: Integer
# @param Mounts: 挂载
# @type Mounts: Array
# @param Network: 容器网络信息
# @type Network: :class:`Tencentcloud::Tcss.v20201101.models.ContainerNetwork`
# @param CreateTime: 创建时间
# @type CreateTime: String
# @param ImageCreateTime: 镜像创建时间
# @type ImageCreateTime: String
# @param ImageSize: 镜像大小
# @type ImageSize: Integer
# @param HostStatus: 主机状态 offline,online,pause
# @type HostStatus: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :HostID, :HostIP, :ContainerName, :Status, :RunAs, :Cmd, :CPUUsage, :RamUsage, :ImageName, :ImageID, :POD, :K8sMaster, :ProcessCnt, :PortCnt, :ComponentCnt, :AppCnt, :WebServiceCnt, :Mounts, :Network, :CreateTime, :ImageCreateTime, :ImageSize, :HostStatus, :RequestId
def initialize(hostid=nil, hostip=nil, containername=nil, status=nil, runas=nil, cmd=nil, cpuusage=nil, ramusage=nil, imagename=nil, imageid=nil, pod=nil, k8smaster=nil, processcnt=nil, portcnt=nil, componentcnt=nil, appcnt=nil, webservicecnt=nil, mounts=nil, network=nil, createtime=nil, imagecreatetime=nil, imagesize=nil, hoststatus=nil, requestid=nil)
@HostID = hostid
@HostIP = hostip
@ContainerName = containername
@Status = status
@RunAs = runas
@Cmd = cmd
@CPUUsage = cpuusage
@RamUsage = ramusage
@ImageName = imagename
@ImageID = imageid
@POD = pod
@K8sMaster = k8smaster
@ProcessCnt = processcnt
@PortCnt = portcnt
@ComponentCnt = componentcnt
@AppCnt = appcnt
@WebServiceCnt = webservicecnt
@Mounts = mounts
@Network = network
@CreateTime = createtime
@ImageCreateTime = imagecreatetime
@ImageSize = imagesize
@HostStatus = hoststatus
@RequestId = requestid
end
def deserialize(params)
@HostID = params['HostID']
@HostIP = params['HostIP']
@ContainerName = params['ContainerName']
@Status = params['Status']
@RunAs = params['RunAs']
@Cmd = params['Cmd']
@CPUUsage = params['CPUUsage']
@RamUsage = params['RamUsage']
@ImageName = params['ImageName']
@ImageID = params['ImageID']
@POD = params['POD']
@K8sMaster = params['K8sMaster']
@ProcessCnt = params['ProcessCnt']
@PortCnt = params['PortCnt']
@ComponentCnt = params['ComponentCnt']
@AppCnt = params['AppCnt']
@WebServiceCnt = params['WebServiceCnt']
unless params['Mounts'].nil?
@Mounts = []
params['Mounts'].each do |i|
containermount_tmp = ContainerMount.new
containermount_tmp.deserialize(i)
@Mounts << containermount_tmp
end
end
unless params['Network'].nil?
@Network = ContainerNetwork.new
@Network.deserialize(params['Network'])
end
@CreateTime = params['CreateTime']
@ImageCreateTime = params['ImageCreateTime']
@ImageSize = params['ImageSize']
@HostStatus = params['HostStatus']
@RequestId = params['RequestId']
end
end
# DescribeAssetContainerList请求参数结构体
class DescribeAssetContainerListRequest < TencentCloud::Common::AbstractModel
# @param Limit: 需要返回的数量，默认为10，最大值为100
# @type Limit: Integer
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
# @param Filters: 过滤条件。
# <li>ContainerName - String - 是否必填：否 - 容器名称模糊搜索</li>
# <li>Status - String - 是否必填：否 - 容器运行状态筛选，0："created",1："running", 2："paused", 3："restarting", 4："removing", 5："exited", 6："dead" </li>
# <li>Runas - String - 是否必填：否 - 运行用户筛选</li>
# <li>ImageName- String - 是否必填：否 - 镜像名称搜索</li>
# <li>HostIP- string - 是否必填：否 - 主机ip搜索</li>
# <li>OrderBy - String 是否必填：否 -排序字段，支持：cpu_usage, mem_usage的动态排序 ["cpu_usage","+"] '+'升序、'-'降序</li>
# @type Filters: Array
# @param By: 排序字段
# @type By: String
# @param Order: 排序方式 asc,desc
# @type Order: String
attr_accessor :Limit, :Offset, :Filters, :By, :Order
def initialize(limit=nil, offset=nil, filters=nil, by=nil, order=nil)
@Limit = limit
@Offset = offset
@Filters = filters
@By = by
@Order = order
end
def deserialize(params)
@Limit = params['Limit']
@Offset = params['Offset']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
assetfilters_tmp = AssetFilters.new
assetfilters_tmp.deserialize(i)
@Filters << assetfilters_tmp
end
end
@By = params['By']
@Order = params['Order']
end
end
# DescribeAssetContainerList返回参数结构体
class DescribeAssetContainerListResponse < TencentCloud::Common::AbstractModel
# @param List: 容器列表
# @type List: Array
# @param TotalCount: 总数量
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :List, :TotalCount, :RequestId
def initialize(list=nil, totalcount=nil, requestid=nil)
@List = list
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['List'].nil?
@List = []
params['List'].each do |i|
containerinfo_tmp = ContainerInfo.new
containerinfo_tmp.deserialize(i)
@List << containerinfo_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeAssetDBServiceList请求参数结构体
class DescribeAssetDBServiceListRequest < TencentCloud::Common::AbstractModel
# @param Limit: 需要返回的数量，默认为10，最大值为100
# @type Limit: Integer
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
# @param Filters: 过滤条件。
# <li>Keywords- String - 是否必填：否 - 模糊查询可选字段</li>
# @type Filters: Array
attr_accessor :Limit, :Offset, :Filters
def initialize(limit=nil, offset=nil, filters=nil)
@Limit = limit
@Offset = offset
@Filters = filters
end
def deserialize(params)
@Limit = params['Limit']
@Offset = params['Offset']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
assetfilters_tmp = AssetFilters.new
assetfilters_tmp.deserialize(i)
@Filters << assetfilters_tmp
end
end
end
end
# DescribeAssetDBServiceList返回参数结构体
class DescribeAssetDBServiceListResponse < TencentCloud::Common::AbstractModel
# @param List: db服务列表
# @type List: Array
# @param TotalCount: 总数量
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :List, :TotalCount, :RequestId
def initialize(list=nil, totalcount=nil, requestid=nil)
@List = list
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['List'].nil?
@List = []
params['List'].each do |i|
serviceinfo_tmp = ServiceInfo.new
serviceinfo_tmp.deserialize(i)
@List << serviceinfo_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeAssetHostDetail请求参数结构体
class DescribeAssetHostDetailRequest < TencentCloud::Common::AbstractModel
# @param HostId: 主机id
# @type HostId: String
attr_accessor :HostId
def initialize(hostid=nil)
@HostId = hostid
end
def deserialize(params)
@HostId = params['HostId']
end
end
# DescribeAssetHostDetail返回参数结构体
class DescribeAssetHostDetailResponse < TencentCloud::Common::AbstractModel
# @param UUID: 云镜uuid
# @type UUID: String
# @param UpdateTime: 更新时间
# @type UpdateTime: String
# @param HostName: 主机名
# @type HostName: String
# @param Group: 主机分组
# @type Group: String
# @param HostIP: 主机IP
# @type HostIP: String
# @param OsName: 操作系统
# @type OsName: String
# @param AgentVersion: agent版本
# @type AgentVersion: String
# @param KernelVersion: 内核版本
# @type KernelVersion: String
# @param DockerVersion: docker版本
# @type DockerVersion: String
# @param DockerAPIVersion: docker api版本
# @type DockerAPIVersion: String
# @param DockerGoVersion: docker go 版本
# @type DockerGoVersion: String
# @param DockerFileSystemDriver: docker 文件系统类型
# @type DockerFileSystemDriver: String
# @param DockerRootDir: docker root 目录
# @type DockerRootDir: String
# @param ImageCnt: 镜像数
# @type ImageCnt: Integer
# @param ContainerCnt: 容器数
# @type ContainerCnt: Integer
# @param K8sMasterIP: k8s IP
# @type K8sMasterIP: String
# @param K8sVersion: k8s version
# @type K8sVersion: String
# @param KubeProxyVersion: kube proxy
# @type KubeProxyVersion: String
# @param Status: "UNINSTALL"："未安装","OFFLINE"："离线", "ONLINE"："防护中
# @type Status: String
# @param IsContainerd: 是否Containerd
# @type IsContainerd: Boolean
# @param MachineType: 主机来源;"TENCENTCLOUD":"腾讯云服务器","OTHERCLOUD":"非腾讯云服务器"
# @type MachineType: String
# @param PublicIp: 外网ip
# @type PublicIp: String
# @param InstanceID: 主机实例ID
# @type InstanceID: String
# @param RegionID: 地域ID
# @type RegionID: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :UUID, :UpdateTime, :HostName, :Group, :HostIP, :OsName, :AgentVersion, :KernelVersion, :DockerVersion, :DockerAPIVersion, :DockerGoVersion, :DockerFileSystemDriver, :DockerRootDir, :ImageCnt, :ContainerCnt, :K8sMasterIP, :K8sVersion, :KubeProxyVersion, :Status, :IsContainerd, :MachineType, :PublicIp, :InstanceID, :RegionID, :RequestId
def initialize(uuid=nil, updatetime=nil, hostname=nil, group=nil, hostip=nil, osname=nil, agentversion=nil, kernelversion=nil, dockerversion=nil, dockerapiversion=nil, dockergoversion=nil, dockerfilesystemdriver=nil, dockerrootdir=nil, imagecnt=nil, containercnt=nil, k8smasterip=nil, k8sversion=nil, kubeproxyversion=nil, status=nil, iscontainerd=nil, machinetype=nil, publicip=nil, instanceid=nil, regionid=nil, requestid=nil)
@UUID = uuid
@UpdateTime = updatetime
@HostName = hostname
@Group = group
@HostIP = hostip
@OsName = osname
@AgentVersion = agentversion
@KernelVersion = kernelversion
@DockerVersion = dockerversion
@DockerAPIVersion = dockerapiversion
@DockerGoVersion = dockergoversion
@DockerFileSystemDriver = dockerfilesystemdriver
@DockerRootDir = dockerrootdir
@ImageCnt = imagecnt
@ContainerCnt = containercnt
@K8sMasterIP = k8smasterip
@K8sVersion = k8sversion
@KubeProxyVersion = kubeproxyversion
@Status = status
@IsContainerd = iscontainerd
@MachineType = machinetype
@PublicIp = publicip
@InstanceID = instanceid
@RegionID = regionid
@RequestId = requestid
end
def deserialize(params)
@UUID = params['UUID']
@UpdateTime = params['UpdateTime']
@HostName = params['HostName']
@Group = params['Group']
@HostIP = params['HostIP']
@OsName = params['OsName']
@AgentVersion = params['AgentVersion']
@KernelVersion = params['KernelVersion']
@DockerVersion = params['DockerVersion']
@DockerAPIVersion = params['DockerAPIVersion']
@DockerGoVersion = params['DockerGoVersion']
@DockerFileSystemDriver = params['DockerFileSystemDriver']
@DockerRootDir = params['DockerRootDir']
@ImageCnt = params['ImageCnt']
@ContainerCnt = params['ContainerCnt']
@K8sMasterIP = params['K8sMasterIP']
@K8sVersion = params['K8sVersion']
@KubeProxyVersion = params['KubeProxyVersion']
@Status = params['Status']
@IsContainerd = params['IsContainerd']
@MachineType = params['MachineType']
@PublicIp = params['PublicIp']
@InstanceID = params['InstanceID']
@RegionID = params['RegionID']
@RequestId = params['RequestId']
end
end
# DescribeAssetHostList请求参数结构体
class DescribeAssetHostListRequest < TencentCloud::Common::AbstractModel
# @param Limit: 需要返回的数量，默认为10，最大值为100
# @type Limit: Integer
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
# @param Filters: 过滤条件。
# <li>Status - String - 是否必填：否 - agent状态筛选，"ALL":"全部"(或不传该字段),"UNINSTALL"："未安装","OFFLINE"："离线", "ONLINE"："防护中"</li>
# <li>HostName - String - 是否必填：否 - 主机名筛选</li>
# <li>Group- String - 是否必填：否 - 主机群组搜索</li>
# <li>HostIP- string - 是否必填：否 - 主机ip搜索</li>
# <li>HostID- string - 是否必填：否 - 主机id搜索</li>
# <li>DockerVersion- string - 是否必填：否 - docker版本搜索</li>
# <li>MachineType- string - 是否必填：否 - 主机来源MachineType搜索，"ALL":"全部"(或不传该字段),主机来源：["CVM", "ECM", "LH", "BM"] 中的之一为腾讯云服务器；["Other"]之一非腾讯云服务器；</li>
# <li>DockerStatus- string - 是否必填：否 - docker安装状态，"ALL":"全部"(或不传该字段),"INSTALL":"已安装","UNINSTALL":"未安装"</li>
# @type Filters: Array
# @param By: 排序字段
# @type By: String
# @param Order: 排序方式 asc,desc
# @type Order: String
attr_accessor :Limit, :Offset, :Filters, :By, :Order
def initialize(limit=nil, offset=nil, filters=nil, by=nil, order=nil)
@Limit = limit
@Offset = offset
@Filters = filters
@By = by
@Order = order
end
def deserialize(params)
@Limit = params['Limit']
@Offset = params['Offset']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
assetfilters_tmp = AssetFilters.new
assetfilters_tmp.deserialize(i)
@Filters << assetfilters_tmp
end
end
@By = params['By']
@Order = params['Order']
end
end
# DescribeAssetHostList返回参数结构体
class DescribeAssetHostListResponse < TencentCloud::Common::AbstractModel
# @param List: 主机列表
# @type List: Array
# @param TotalCount: 总数量
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :List, :TotalCount, :RequestId
def initialize(list=nil, totalcount=nil, requestid=nil)
@List = list
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['List'].nil?
@List = []
params['List'].each do |i|
hostinfo_tmp = HostInfo.new
hostinfo_tmp.deserialize(i)
@List << hostinfo_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeAssetImageBindRuleInfo请求参数结构体
class DescribeAssetImageBindRuleInfoRequest < TencentCloud::Common::AbstractModel
# @param Limit: 需要返回的数量，默认为10，最大值为100
# @type Limit: Integer
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
# @param Filters: 过滤参数,"Filters":[{"Name":"EventType","Values":[""]}]
# EventType取值：
# "FILE_ABNORMAL_READ" 访问控制
# "MALICE_PROCESS_START" 恶意进程启动
# @type Filters: Array
# @param Order: 升序降序,asc desc
# @type Order: String
# @param By: 排序字段
# @type By: String
attr_accessor :Limit, :Offset, :Filters, :Order, :By
def initialize(limit=nil, offset=nil, filters=nil, order=nil, by=nil)
@Limit = limit
@Offset = offset
@Filters = filters
@Order = order
@By = by
end
def deserialize(params)
@Limit = params['Limit']
@Offset = params['Offset']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
runtimefilters_tmp = RunTimeFilters.new
runtimefilters_tmp.deserialize(i)
@Filters << runtimefilters_tmp
end
end
@Order = params['Order']
@By = params['By']
end
end
# DescribeAssetImageBindRuleInfo返回参数结构体
class DescribeAssetImageBindRuleInfoResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 事件总数量
# @type TotalCount: Integer
# @param ImageBindRuleSet: 镜像绑定规则列表
# @type ImageBindRuleSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :ImageBindRuleSet, :RequestId
def initialize(totalcount=nil, imagebindruleset=nil, requestid=nil)
@TotalCount = totalcount
@ImageBindRuleSet = imagebindruleset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['ImageBindRuleSet'].nil?
@ImageBindRuleSet = []
params['ImageBindRuleSet'].each do |i|
imagesbindruleinfo_tmp = ImagesBindRuleInfo.new
imagesbindruleinfo_tmp.deserialize(i)
@ImageBindRuleSet << imagesbindruleinfo_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeAssetImageDetail请求参数结构体
class DescribeAssetImageDetailRequest < TencentCloud::Common::AbstractModel
# @param ImageID: 镜像id
# @type ImageID: String
attr_accessor :ImageID
def initialize(imageid=nil)
@ImageID = imageid
end
def deserialize(params)
@ImageID = params['ImageID']
end
end
# DescribeAssetImageDetail返回参数结构体
class DescribeAssetImageDetailResponse < TencentCloud::Common::AbstractModel
# @param ImageID: 镜像ID
# @type ImageID: String
# @param ImageName: 镜像名称
# @type ImageName: String
# @param CreateTime: 创建时间
# @type CreateTime: String
# @param Size: 镜像大小
# @type Size: Integer
# @param HostCnt: 关联主机个数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type HostCnt: Integer
# @param ContainerCnt: 关联容器个数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ContainerCnt: Integer
# @param ScanTime: 最近扫描时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ScanTime: String
# @param VulCnt: 漏洞个数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type VulCnt: Integer
# @param RiskCnt: 风险行为数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RiskCnt: Integer
# @param SensitiveInfoCnt: 敏感信息数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SensitiveInfoCnt: Integer
# @param IsTrustImage: 是否信任镜像
# @type IsTrustImage: Boolean
# @param OsName: 镜像系统
# @type OsName: String
# @param AgentError: agent镜像扫描错误
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AgentError: String
# @param ScanError: 后端镜像扫描错误
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ScanError: String
# @param Architecture: 系统架构
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Architecture: String
# @param Author: 作者
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Author: String
# @param BuildHistory: 构建历史
# 注意：此字段可能返回 null，表示取不到有效值。
# @type BuildHistory: String
# @param ScanVirusProgress: 木马扫描进度
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ScanVirusProgress: Integer
# @param ScanVulProgress: 漏洞扫进度
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ScanVulProgress: Integer
# @param ScanRiskProgress: 敏感信息扫描进度
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ScanRiskProgress: Integer
# @param ScanVirusError: 木马扫描错误
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ScanVirusError: String
# @param ScanVulError: 漏洞扫描错误
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ScanVulError: String
# @param ScanRiskError: 敏感信息错误
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ScanRiskError: String
# @param ScanStatus: 镜像扫描状态
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ScanStatus: String
# @param VirusCnt: 木马病毒数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type VirusCnt: Integer
# @param Status: 镜像扫描状态
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Status: Integer
# @param RemainScanTime: 剩余扫描时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RemainScanTime: Integer
# @param IsAuthorized: 授权为：1，未授权为：0
# @type IsAuthorized: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :ImageID, :ImageName, :CreateTime, :Size, :HostCnt, :ContainerCnt, :ScanTime, :VulCnt, :RiskCnt, :SensitiveInfoCnt, :IsTrustImage, :OsName, :AgentError, :ScanError, :Architecture, :Author, :BuildHistory, :ScanVirusProgress, :ScanVulProgress, :ScanRiskProgress, :ScanVirusError, :ScanVulError, :ScanRiskError, :ScanStatus, :VirusCnt, :Status, :RemainScanTime, :IsAuthorized, :RequestId
def initialize(imageid=nil, imagename=nil, createtime=nil, size=nil, hostcnt=nil, containercnt=nil, scantime=nil, vulcnt=nil, riskcnt=nil, sensitiveinfocnt=nil, istrustimage=nil, osname=nil, agenterror=nil, scanerror=nil, architecture=nil, author=nil, buildhistory=nil, scanvirusprogress=nil, scanvulprogress=nil, scanriskprogress=nil, scanviruserror=nil, scanvulerror=nil, scanriskerror=nil, scanstatus=nil, viruscnt=nil, status=nil, remainscantime=nil, isauthorized=nil, requestid=nil)
@ImageID = imageid
@ImageName = imagename
@CreateTime = createtime
@Size = size
@HostCnt = hostcnt
@ContainerCnt = containercnt
@ScanTime = scantime
@VulCnt = vulcnt
@RiskCnt = riskcnt
@SensitiveInfoCnt = sensitiveinfocnt
@IsTrustImage = istrustimage
@OsName = osname
@AgentError = agenterror
@ScanError = scanerror
@Architecture = architecture
@Author = author
@BuildHistory = buildhistory
@ScanVirusProgress = scanvirusprogress
@ScanVulProgress = scanvulprogress
@ScanRiskProgress = scanriskprogress
@ScanVirusError = scanviruserror
@ScanVulError = scanvulerror
@ScanRiskError = scanriskerror
@ScanStatus = scanstatus
@VirusCnt = viruscnt
@Status = status
@RemainScanTime = remainscantime
@IsAuthorized = isauthorized
@RequestId = requestid
end
def deserialize(params)
@ImageID = params['ImageID']
@ImageName = params['ImageName']
@CreateTime = params['CreateTime']
@Size = params['Size']
@HostCnt = params['HostCnt']
@ContainerCnt = params['ContainerCnt']
@ScanTime = params['ScanTime']
@VulCnt = params['VulCnt']
@RiskCnt = params['RiskCnt']
@SensitiveInfoCnt = params['SensitiveInfoCnt']
@IsTrustImage = params['IsTrustImage']
@OsName = params['OsName']
@AgentError = params['AgentError']
@ScanError = params['ScanError']
@Architecture = params['Architecture']
@Author = params['Author']
@BuildHistory = params['BuildHistory']
@ScanVirusProgress = params['ScanVirusProgress']
@ScanVulProgress = params['ScanVulProgress']
@ScanRiskProgress = params['ScanRiskProgress']
@ScanVirusError = params['ScanVirusError']
@ScanVulError = params['ScanVulError']
@ScanRiskError = params['ScanRiskError']
@ScanStatus = params['ScanStatus']
@VirusCnt = params['VirusCnt']
@Status = params['Status']
@RemainScanTime = params['RemainScanTime']
@IsAuthorized = params['IsAuthorized']
@RequestId = params['RequestId']
end
end
# DescribeAssetImageHostList请求参数结构体
class DescribeAssetImageHostListRequest < TencentCloud::Common::AbstractModel
# @param Filters: 过滤条件 支持ImageID,HostID
# @type Filters: Array
attr_accessor :Filters
def initialize(filters=nil)
@Filters = filters
end
def deserialize(params)
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
assetfilters_tmp = AssetFilters.new
assetfilters_tmp.deserialize(i)
@Filters << assetfilters_tmp
end
end
end
end
# DescribeAssetImageHostList返回参数结构体
class DescribeAssetImageHostListResponse < TencentCloud::Common::AbstractModel
# @param List: 镜像列表
# @type List: Array
# @param TotalCount: 总数量
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :List, :TotalCount, :RequestId
def initialize(list=nil, totalcount=nil, requestid=nil)
@List = list
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['List'].nil?
@List = []
params['List'].each do |i|
imagehost_tmp = ImageHost.new
imagehost_tmp.deserialize(i)
@List << imagehost_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeAssetImageListExport请求参数结构体
class DescribeAssetImageListExportRequest < TencentCloud::Common::AbstractModel
# @param ExportField: 导出字段
# @type ExportField: Array
# @param Limit: 需要返回的数量，默认为10，最大值为100
# @type Limit: Integer
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
# @param Filters: 过滤条件。
# <li>ImageName- String - 是否必填：否 - 镜像名称筛选，</li>
# <li>ScanStatus - String - 是否必填：否 - 镜像扫描状态notScan，scanning，scanned，scanErr</li>
# <li>ImageID- String - 是否必填：否 - 镜像ID筛选，</li>
# <li>SecurityRisk- String - 是否必填：否 - 安全风险，VulCnt 、VirusCnt、RiskCnt、IsTrustImage</li>
# @type Filters: Array
# @param By: 排序字段
# @type By: String
# @param Order: 排序方式 asc,desc
# @type Order: String
attr_accessor :ExportField, :Limit, :Offset, :Filters, :By, :Order
def initialize(exportfield=nil, limit=nil, offset=nil, filters=nil, by=nil, order=nil)
@ExportField = exportfield
@Limit = limit
@Offset = offset
@Filters = filters
@By = by
@Order = order
end
def deserialize(params)
@ExportField = params['ExportField']
@Limit = params['Limit']
@Offset = params['Offset']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
assetfilters_tmp = AssetFilters.new
assetfilters_tmp.deserialize(i)
@Filters << assetfilters_tmp
end
end
@By = params['By']
@Order = params['Order']
end
end
# DescribeAssetImageListExport返回参数结构体
class DescribeAssetImageListExportResponse < TencentCloud::Common::AbstractModel
# @param DownloadUrl: excel文件下载地址
# @type DownloadUrl: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :DownloadUrl, :RequestId
def initialize(downloadurl=nil, requestid=nil)
@DownloadUrl = downloadurl
@RequestId = requestid
end
def deserialize(params)
@DownloadUrl = params['DownloadUrl']
@RequestId = params['RequestId']
end
end
# DescribeAssetImageList请求参数结构体
class DescribeAssetImageListRequest < TencentCloud::Common::AbstractModel
# @param Limit: 需要返回的数量，默认为10，最大值为100
# @type Limit: Integer
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
# @param Filters: 过滤条件。
# <li>ImageName- String - 是否必填：否 - 镜像名称筛选，</li>
# <li>ScanStatus - String - 是否必填：否 - 镜像扫描状态notScan，scanning，scanned，scanErr</li>
# <li>ImageID- String - 是否必填：否 - 镜像ID筛选，</li>
# <li>SecurityRisk- String - 是否必填：否 - 安全风险，VulCnt 、VirusCnt、RiskCnt、IsTrustImage</li>
# @type Filters: Array
# @param By: 排序字段
# @type By: String
# @param Order: 排序方式 asc,desc
# @type Order: String
attr_accessor :Limit, :Offset, :Filters, :By, :Order
def initialize(limit=nil, offset=nil, filters=nil, by=nil, order=nil)
@Limit = limit
@Offset = offset
@Filters = filters
@By = by
@Order = order
end
def deserialize(params)
@Limit = params['Limit']
@Offset = params['Offset']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
assetfilters_tmp = AssetFilters.new
assetfilters_tmp.deserialize(i)
@Filters << assetfilters_tmp
end
end
@By = params['By']
@Order = params['Order']
end
end
# DescribeAssetImageList返回参数结构体
class DescribeAssetImageListResponse < TencentCloud::Common::AbstractModel
# @param List: 镜像列表
# @type List: Array
# @param TotalCount: 总数量
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :List, :TotalCount, :RequestId
def initialize(list=nil, totalcount=nil, requestid=nil)
@List = list
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['List'].nil?
@List = []
params['List'].each do |i|
imagesinfo_tmp = ImagesInfo.new
imagesinfo_tmp.deserialize(i)
@List << imagesinfo_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeAssetImageRegistryAssetStatus请求参数结构体
class DescribeAssetImageRegistryAssetStatusRequest < TencentCloud::Common::AbstractModel
def initialize()
end
def deserialize(params)
end
end
# DescribeAssetImageRegistryAssetStatus返回参数结构体
class DescribeAssetImageRegistryAssetStatusResponse < TencentCloud::Common::AbstractModel
# @param Status: 更新进度状态,doing更新中，success更新成功，failed失败
# @type Status: String
# @param Err: 错误信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Err: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Status, :Err, :RequestId
def initialize(status=nil, err=nil, requestid=nil)
@Status = status
@Err = err
@RequestId = requestid
end
def deserialize(params)
@Status = params['Status']
@Err = params['Err']
@RequestId = params['RequestId']
end
end
# DescribeAssetImageRegistryDetail请求参数结构体
class DescribeAssetImageRegistryDetailRequest < TencentCloud::Common::AbstractModel
# @param Id: 仓库列表id
# @type Id: Integer
# @param ImageId: 镜像ID
# @type ImageId: String
attr_accessor :Id, :ImageId
def initialize(id=nil, imageid=nil)
@Id = id
@ImageId = imageid
end
def deserialize(params)
@Id = params['Id']
@ImageId = params['ImageId']
end
end
# DescribeAssetImageRegistryDetail返回参数结构体
class DescribeAssetImageRegistryDetailResponse < TencentCloud::Common::AbstractModel
# @param ImageDigest: 镜像Digest
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ImageDigest: String
# @param ImageRepoAddress: 镜像地址
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ImageRepoAddress: String
# @param RegistryType: 镜像类型
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RegistryType: String
# @param ImageName: 仓库名称
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ImageName: String
# @param ImageTag: 镜像版本
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ImageTag: String
# @param ScanTime: 扫描时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ScanTime: String
# @param ScanStatus: 扫描状态
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ScanStatus: String
# @param VulCnt: 安全漏洞数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type VulCnt: Integer
# @param VirusCnt: 木马病毒数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type VirusCnt: Integer
# @param RiskCnt: 风险行为数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RiskCnt: Integer
# @param SentiveInfoCnt: 敏感信息数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SentiveInfoCnt: Integer
# @param OsName: 镜像系统
# 注意：此字段可能返回 null，表示取不到有效值。
# @type OsName: String
# @param ScanVirusError: 木马扫描错误
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ScanVirusError: String
# @param ScanVulError: 漏洞扫描错误
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ScanVulError: String
# @param LayerInfo: 层文件信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type LayerInfo: String
# @param InstanceId: 实例id
# 注意：此字段可能返回 null，表示取不到有效值。
# @type InstanceId: String
# @param InstanceName: 实例名称
# 注意：此字段可能返回 null，表示取不到有效值。
# @type InstanceName: String
# @param Namespace: 命名空间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Namespace: String
# @param ScanRiskError: 高危扫描错误
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ScanRiskError: String
# @param ScanVirusProgress: 木马信息扫描进度
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ScanVirusProgress: Integer
# @param ScanVulProgress: 漏洞扫描进度
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ScanVulProgress: Integer
# @param ScanRiskProgress: 敏感扫描进度
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ScanRiskProgress: Integer
# @param ScanRemainTime: 剩余扫描时间秒
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ScanRemainTime: Integer
# @param CveStatus: cve扫描状态
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CveStatus: String
# @param RiskStatus: 高危扫描状态
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RiskStatus: String
# @param VirusStatus: 木马扫描状态
# 注意：此字段可能返回 null，表示取不到有效值。
# @type VirusStatus: String
# @param Progress: 总进度
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Progress: Integer
# @param IsAuthorized: 授权状态
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IsAuthorized: Integer
# @param ImageSize: 镜像大小
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ImageSize: Integer
# @param ImageId: 镜像Id
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ImageId: String
# @param RegistryRegion: 镜像区域
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RegistryRegion: String
# @param ImageCreateTime: 镜像创建的时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ImageCreateTime: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :ImageDigest, :ImageRepoAddress, :RegistryType, :ImageName, :ImageTag, :ScanTime, :ScanStatus, :VulCnt, :VirusCnt, :RiskCnt, :SentiveInfoCnt, :OsName, :ScanVirusError, :ScanVulError, :LayerInfo, :InstanceId, :InstanceName, :Namespace, :ScanRiskError, :ScanVirusProgress, :ScanVulProgress, :ScanRiskProgress, :ScanRemainTime, :CveStatus, :RiskStatus, :VirusStatus, :Progress, :IsAuthorized, :ImageSize, :ImageId, :RegistryRegion, :ImageCreateTime, :RequestId
def initialize(imagedigest=nil, imagerepoaddress=nil, registrytype=nil, imagename=nil, imagetag=nil, scantime=nil, scanstatus=nil, vulcnt=nil, viruscnt=nil, riskcnt=nil, sentiveinfocnt=nil, osname=nil, scanviruserror=nil, scanvulerror=nil, layerinfo=nil, instanceid=nil, instancename=nil, namespace=nil, scanriskerror=nil, scanvirusprogress=nil, scanvulprogress=nil, scanriskprogress=nil, scanremaintime=nil, cvestatus=nil, riskstatus=nil, virusstatus=nil, progress=nil, isauthorized=nil, imagesize=nil, imageid=nil, registryregion=nil, imagecreatetime=nil, requestid=nil)
@ImageDigest = imagedigest
@ImageRepoAddress = imagerepoaddress
@RegistryType = registrytype
@ImageName = imagename
@ImageTag = imagetag
@ScanTime = scantime
@ScanStatus = scanstatus
@VulCnt = vulcnt
@VirusCnt = viruscnt
@RiskCnt = riskcnt
@SentiveInfoCnt = sentiveinfocnt
@OsName = osname
@ScanVirusError = scanviruserror
@ScanVulError = scanvulerror
@LayerInfo = layerinfo
@InstanceId = instanceid
@InstanceName = instancename
@Namespace = namespace
@ScanRiskError = scanriskerror
@ScanVirusProgress = scanvirusprogress
@ScanVulProgress = scanvulprogress
@ScanRiskProgress = scanriskprogress
@ScanRemainTime = scanremaintime
@CveStatus = cvestatus
@RiskStatus = riskstatus
@VirusStatus = virusstatus
@Progress = progress
@IsAuthorized = isauthorized
@ImageSize = imagesize
@ImageId = imageid
@RegistryRegion = registryregion
@ImageCreateTime = imagecreatetime
@RequestId = requestid
end
def deserialize(params)
@ImageDigest = params['ImageDigest']
@ImageRepoAddress = params['ImageRepoAddress']
@RegistryType = params['RegistryType']
@ImageName = params['ImageName']
@ImageTag = params['ImageTag']
@ScanTime = params['ScanTime']
@ScanStatus = params['ScanStatus']
@VulCnt = params['VulCnt']
@VirusCnt = params['VirusCnt']
@RiskCnt = params['RiskCnt']
@SentiveInfoCnt = params['SentiveInfoCnt']
@OsName = params['OsName']
@ScanVirusError = params['ScanVirusError']
@ScanVulError = params['ScanVulError']
@LayerInfo = params['LayerInfo']
@InstanceId = params['InstanceId']
@InstanceName = params['InstanceName']
@Namespace = params['Namespace']
@ScanRiskError = params['ScanRiskError']
@ScanVirusProgress = params['ScanVirusProgress']
@ScanVulProgress = params['ScanVulProgress']
@ScanRiskProgress = params['ScanRiskProgress']
@ScanRemainTime = params['ScanRemainTime']
@CveStatus = params['CveStatus']
@RiskStatus = params['RiskStatus']
@VirusStatus = params['VirusStatus']
@Progress = params['Progress']
@IsAuthorized = params['IsAuthorized']
@ImageSize = params['ImageSize']
@ImageId = params['ImageId']
@RegistryRegion = params['RegistryRegion']
@ImageCreateTime = params['ImageCreateTime']
@RequestId = params['RequestId']
end
end
# DescribeAssetImageRegistryListExport请求参数结构体
class DescribeAssetImageRegistryListExportRequest < TencentCloud::Common::AbstractModel
# @param ExportField: 导出字段
# @type ExportField: Array
# @param Limit: 需要返回的数量，默认为10，最大值为100
# @type Limit: Integer
# @param Offset: 偏移量，默认为0
# @type Offset: Integer
# @param Filters: 排序字段
# @type Filters: Array
# @param By: 排序字段
# @type By: String
# @param Order: 排序方式，asc，desc
# @type Order: String
# @param OnlyShowLatest: 是否仅展示repository版本最新的镜像，默认为false
# @type OnlyShowLatest: Boolean
attr_accessor :ExportField, :Limit, :Offset, :Filters, :By, :Order, :OnlyShowLatest
def initialize(exportfield=nil, limit=nil, offset=nil, filters=nil, by=nil, order=nil, onlyshowlatest=nil)
@ExportField = exportfield
@Limit = limit
@Offset = offset
@Filters = filters
@By = by
@Order = order
@OnlyShowLatest = onlyshowlatest
end
def deserialize(params)
@ExportField = params['ExportField']
@Limit = params['Limit']
@Offset = params['Offset']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
assetfilters_tmp = AssetFilters.new
assetfilters_tmp.deserialize(i)
@Filters << assetfilters_tmp
end
end
@By = params['By']
@Order = params['Order']
@OnlyShowLatest = params['OnlyShowLatest']
end
end
# DescribeAssetImageRegistryListExport返回参数结构体
class DescribeAssetImageRegistryListExportResponse < TencentCloud::Common::AbstractModel
# @param DownloadUrl: excel文件下载地址
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DownloadUrl: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :DownloadUrl, :RequestId
def initialize(downloadurl=nil, requestid=nil)
@DownloadUrl = downloadurl
@RequestId = requestid
end
def deserialize(params)
@DownloadUrl = params['DownloadUrl']
@RequestId = params['RequestId']
end
end
# DescribeAssetImageRegistryList请求参数结构体
class DescribeAssetImageRegistryListRequest < TencentCloud::Common::AbstractModel
# @param Limit: 需要返回的数量，默认为10，最大值为100
# @type Limit: Integer
# @param Offset: 偏移量，默认为0
# @type Offset: Integer
# @param Filters: 过滤字段
# IsAuthorized是否授权，取值全部all，未授权0，已授权1
# @type Filters: Array
# @param By: 排序字段
# @type By: String
# @param Order: 排序方式，asc，desc
# @type Order: String
# @param OnlyShowLatest: 是否仅展示各repository最新的镜像, 默认为false
# @type OnlyShowLatest: Boolean
attr_accessor :Limit, :Offset, :Filters, :By, :Order, :OnlyShowLatest
def initialize(limit=nil, offset=nil, filters=nil, by=nil, order=nil, onlyshowlatest=nil)
@Limit = limit
@Offset = offset
@Filters = filters
@By = by
@Order = order
@OnlyShowLatest = onlyshowlatest
end
def deserialize(params)
@Limit = params['Limit']
@Offset = params['Offset']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
assetfilters_tmp = AssetFilters.new
assetfilters_tmp.deserialize(i)
@Filters << assetfilters_tmp
end
end
@By = params['By']
@Order = params['Order']
@OnlyShowLatest = params['OnlyShowLatest']
end
end
# DescribeAssetImageRegistryList返回参数结构体
class DescribeAssetImageRegistryListResponse < TencentCloud::Common::AbstractModel
# @param List: 镜像仓库列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type List: Array
# @param TotalCount: 总数量
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :List, :TotalCount, :RequestId
def initialize(list=nil, totalcount=nil, requestid=nil)
@List = list
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['List'].nil?
@List = []
params['List'].each do |i|
imagerepoinfo_tmp = ImageRepoInfo.new
imagerepoinfo_tmp.deserialize(i)
@List << imagerepoinfo_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeAssetImageRegistryRegistryDetail请求参数结构体
class DescribeAssetImageRegistryRegistryDetailRequest < TencentCloud::Common::AbstractModel
# @param RegistryId: 仓库唯一id
# @type RegistryId: Integer
attr_accessor :RegistryId
def initialize(registryid=nil)
@RegistryId = registryid
end
def deserialize(params)
@RegistryId = params['RegistryId']
end
end
# DescribeAssetImageRegistryRegistryDetail返回参数结构体
class DescribeAssetImageRegistryRegistryDetailResponse < TencentCloud::Common::AbstractModel
# @param Name: 仓库名
# @type Name: String
# @param Username: 用户名
# @type Username: String
# @param Password: 密码
# @type Password: String
# @param Url: 仓库url
# @type Url: String
# @param RegistryType: 仓库类型，列表：harbor
# @type RegistryType: String
# @param RegistryVersion: 仓库版本
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RegistryVersion: String
# @param NetType: 网络类型，列表：public（公网）
# @type NetType: String
# @param RegistryRegion: 区域，列表:default（默认）
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RegistryRegion: String
# @param SpeedLimit: 限速
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SpeedLimit: Integer
# @param Insecure: 安全模式（证书校验）：0（默认） 非安全模式（跳过证书校验）：1
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Insecure: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Name, :Username, :Password, :Url, :RegistryType, :RegistryVersion, :NetType, :RegistryRegion, :SpeedLimit, :Insecure, :RequestId
def initialize(name=nil, username=nil, password=nil, url=nil, registrytype=nil, registryversion=nil, nettype=nil, registryregion=nil, speedlimit=nil, insecure=nil, requestid=nil)
@Name = name
@Username = username
@Password = password
@Url = url
@RegistryType = registrytype
@RegistryVersion = registryversion
@NetType = nettype
@RegistryRegion = registryregion
@SpeedLimit = speedlimit
@Insecure = insecure
@RequestId = requestid
end
def deserialize(params)
@Name = params['Name']
@Username = params['Username']
@Password = params['Password']
@Url = params['Url']
@RegistryType = params['RegistryType']
@RegistryVersion = params['RegistryVersion']
@NetType = params['NetType']
@RegistryRegion = params['RegistryRegion']
@SpeedLimit = params['SpeedLimit']
@Insecure = params['Insecure']
@RequestId = params['RequestId']
end
end
# DescribeAssetImageRegistryRegistryList请求参数结构体
class DescribeAssetImageRegistryRegistryListRequest < TencentCloud::Common::AbstractModel
def initialize()
end
def deserialize(params)
end
end
# DescribeAssetImageRegistryRegistryList返回参数结构体
class DescribeAssetImageRegistryRegistryListResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DescribeAssetImageRegistryRiskInfoList请求参数结构体
class DescribeAssetImageRegistryRiskInfoListRequest < TencentCloud::Common::AbstractModel
# @param Limit: 需要返回的数量，默认为10，最大值为100
# @type Limit: Integer
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
# @param Filters: 过滤条件。
# <li>Level- String - 是否必填：否 - 漏洞级别筛选，</li>
# <li>Name - String - 是否必填：否 - 漏洞名称</li>
# @type Filters: Array
# @param ImageInfo: 镜像id
# @type ImageInfo: :class:`Tencentcloud::Tcss.v20201101.models.ImageInfo`
# @param By: 排序字段（Level）
# @type By: String
# @param Order: 排序方式 + -
# @type Order: String
# @param Id: 镜像标识Id
# @type Id: Integer
attr_accessor :Limit, :Offset, :Filters, :ImageInfo, :By, :Order, :Id
def initialize(limit=nil, offset=nil, filters=nil, imageinfo=nil, by=nil, order=nil, id=nil)
@Limit = limit
@Offset = offset
@Filters = filters
@ImageInfo = imageinfo
@By = by
@Order = order
@Id = id
end
def deserialize(params)
@Limit = params['Limit']
@Offset = params['Offset']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
assetfilters_tmp = AssetFilters.new
assetfilters_tmp.deserialize(i)
@Filters << assetfilters_tmp
end
end
unless params['ImageInfo'].nil?
@ImageInfo = ImageInfo.new
@ImageInfo.deserialize(params['ImageInfo'])
end
@By = params['By']
@Order = params['Order']
@Id = params['Id']
end
end
# DescribeAssetImageRegistryRiskInfoList返回参数结构体
class DescribeAssetImageRegistryRiskInfoListResponse < TencentCloud::Common::AbstractModel
# @param List: 镜像漏洞列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type List: Array
# @param TotalCount: 总数量
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :List, :TotalCount, :RequestId
def initialize(list=nil, totalcount=nil, requestid=nil)
@List = list
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['List'].nil?
@List = []
params['List'].each do |i|
imagerisk_tmp = ImageRisk.new
imagerisk_tmp.deserialize(i)
@List << imagerisk_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeAssetImageRegistryRiskListExport请求参数结构体
class DescribeAssetImageRegistryRiskListExportRequest < TencentCloud::Common::AbstractModel
# @param ExportField: 导出字段
# @type ExportField: Array
# @param Limit: 需要返回的数量，默认为10，最大值为100
# @type Limit: Integer
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
# @param Filters: 过滤条件。
# <li>Level- String - 是否必填：否 - 漏洞级别筛选，</li>
# <li>Name - String - 是否必填：否 - 漏洞名称</li>
# @type Filters: Array
# @param ImageInfo: 镜像信息
# @type ImageInfo: :class:`Tencentcloud::Tcss.v20201101.models.ImageInfo`
# @param Id: 镜像标识Id
# @type Id: Integer
attr_accessor :ExportField, :Limit, :Offset, :Filters, :ImageInfo, :Id
def initialize(exportfield=nil, limit=nil, offset=nil, filters=nil, imageinfo=nil, id=nil)
@ExportField = exportfield
@Limit = limit
@Offset = offset
@Filters = filters
@ImageInfo = imageinfo
@Id = id
end
def deserialize(params)
@ExportField = params['ExportField']
@Limit = params['Limit']
@Offset = params['Offset']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
assetfilters_tmp = AssetFilters.new
assetfilters_tmp.deserialize(i)
@Filters << assetfilters_tmp
end
end
unless params['ImageInfo'].nil?
@ImageInfo = ImageInfo.new
@ImageInfo.deserialize(params['ImageInfo'])
end
@Id = params['Id']
end
end
# DescribeAssetImageRegistryRiskListExport返回参数结构体
class DescribeAssetImageRegistryRiskListExportResponse < TencentCloud::Common::AbstractModel
# @param DownloadUrl: excel文件下载地址
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DownloadUrl: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :DownloadUrl, :RequestId
def initialize(downloadurl=nil, requestid=nil)
@DownloadUrl = downloadurl
@RequestId = requestid
end
def deserialize(params)
@DownloadUrl = params['DownloadUrl']
@RequestId = params['RequestId']
end
end
# DescribeAssetImageRegistryScanStatusOneKey请求参数结构体
class DescribeAssetImageRegistryScanStatusOneKeyRequest < TencentCloud::Common::AbstractModel
# @param Images: 需要获取进度的镜像列表
# @type Images: Array
# @param All: 是否获取全部镜像
# @type All: Boolean
# @param Id: 需要获取进度的镜像列表Id
# @type Id: Array
attr_accessor :Images, :All, :Id
def initialize(images=nil, all=nil, id=nil)
@Images = images
@All = all
@Id = id
end
def deserialize(params)
unless params['Images'].nil?
@Images = []
params['Images'].each do |i|
imageinfo_tmp = ImageInfo.new
imageinfo_tmp.deserialize(i)
@Images << imageinfo_tmp
end
end
@All = params['All']
@Id = params['Id']
end
end
# DescribeAssetImageRegistryScanStatusOneKey返回参数结构体
class DescribeAssetImageRegistryScanStatusOneKeyResponse < TencentCloud::Common::AbstractModel
# @param ImageTotal: 镜像个数
# @type ImageTotal: Integer
# @param ImageScanCnt: 扫描镜像个数
# @type ImageScanCnt: Integer
# @param ImageStatus: 扫描进度列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ImageStatus: Array
# @param SuccessCount: 安全个数
# @type SuccessCount: Integer
# @param RiskCount: 风险个数
# @type RiskCount: Integer
# @param Schedule: 总的扫描进度
# @type Schedule: Integer
# @param Status: 总的扫描状态
# @type Status: String
# @param ScanRemainTime: 扫描剩余时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ScanRemainTime: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :ImageTotal, :ImageScanCnt, :ImageStatus, :SuccessCount, :RiskCount, :Schedule, :Status, :ScanRemainTime, :RequestId
def initialize(imagetotal=nil, imagescancnt=nil, imagestatus=nil, successcount=nil, riskcount=nil, schedule=nil, status=nil, scanremaintime=nil, requestid=nil)
@ImageTotal = imagetotal
@ImageScanCnt = imagescancnt
@ImageStatus = imagestatus
@SuccessCount = successcount
@RiskCount = riskcount
@Schedule = schedule
@Status = status
@ScanRemainTime = scanremaintime
@RequestId = requestid
end
def deserialize(params)
@ImageTotal = params['ImageTotal']
@ImageScanCnt = params['ImageScanCnt']
unless params['ImageStatus'].nil?
@ImageStatus = []
params['ImageStatus'].each do |i|
imageprogress_tmp = ImageProgress.new
imageprogress_tmp.deserialize(i)
@ImageStatus << imageprogress_tmp
end
end
@SuccessCount = params['SuccessCount']
@RiskCount = params['RiskCount']
@Schedule = params['Schedule']
@Status = params['Status']
@ScanRemainTime = params['ScanRemainTime']
@RequestId = params['RequestId']
end
end
# DescribeAssetImageRegistrySummary请求参数结构体
class DescribeAssetImageRegistrySummaryRequest < TencentCloud::Common::AbstractModel
def initialize()
end
def deserialize(params)
end
end
# DescribeAssetImageRegistrySummary返回参数结构体
class DescribeAssetImageRegistrySummaryResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DescribeAssetImageRegistryVirusListExport请求参数结构体
class DescribeAssetImageRegistryVirusListExportRequest < TencentCloud::Common::AbstractModel
# @param ExportField: 导出字段
# @type ExportField: Array
# @param Limit: 需要返回的数量，默认为10，最大值为100
# @type Limit: Integer
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
# @param Filters: 过滤条件。
# <li>Level- String - 是否必填：否 - 漏洞级别筛选，</li>
# <li>Name - String - 是否必填：否 - 漏洞名称</li>
# @type Filters: Array
# @param ImageInfo: 镜像信息
# @type ImageInfo: :class:`Tencentcloud::Tcss.v20201101.models.ImageInfo`
# @param Id: 镜像标识Id
# @type Id: Integer
attr_accessor :ExportField, :Limit, :Offset, :Filters, :ImageInfo, :Id
def initialize(exportfield=nil, limit=nil, offset=nil, filters=nil, imageinfo=nil, id=nil)
@ExportField = exportfield
@Limit = limit
@Offset = offset
@Filters = filters
@ImageInfo = imageinfo
@Id = id
end
def deserialize(params)
@ExportField = params['ExportField']
@Limit = params['Limit']
@Offset = params['Offset']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
assetfilters_tmp = AssetFilters.new
assetfilters_tmp.deserialize(i)
@Filters << assetfilters_tmp
end
end
unless params['ImageInfo'].nil?
@ImageInfo = ImageInfo.new
@ImageInfo.deserialize(params['ImageInfo'])
end
@Id = params['Id']
end
end
# DescribeAssetImageRegistryVirusListExport返回参数结构体
class DescribeAssetImageRegistryVirusListExportResponse < TencentCloud::Common::AbstractModel
# @param DownloadUrl: excel文件下载地址
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DownloadUrl: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :DownloadUrl, :RequestId
def initialize(downloadurl=nil, requestid=nil)
@DownloadUrl = downloadurl
@RequestId = requestid
end
def deserialize(params)
@DownloadUrl = params['DownloadUrl']
@RequestId = params['RequestId']
end
end
# DescribeAssetImageRegistryVirusList请求参数结构体
class DescribeAssetImageRegistryVirusListRequest < TencentCloud::Common::AbstractModel
# @param Limit: 需要返回的数量，默认为10，最大值为100
# @type Limit: Integer
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
# @param Filters: 过滤条件。
# <li>Level- String - 是否必填：否 - 漏洞级别筛选，</li>
# <li>Name - String - 是否必填：否 - 漏洞名称</li>
# @type Filters: Array
# @param ImageInfo: 镜像信息
# @type ImageInfo: :class:`Tencentcloud::Tcss.v20201101.models.ImageInfo`
# @param Id: 镜像标识Id
# @type Id: Integer
attr_accessor :Limit, :Offset, :Filters, :ImageInfo, :Id
def initialize(limit=nil, offset=nil, filters=nil, imageinfo=nil, id=nil)
@Limit = limit
@Offset = offset
@Filters = filters
@ImageInfo = imageinfo
@Id = id
end
def deserialize(params)
@Limit = params['Limit']
@Offset = params['Offset']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
assetfilters_tmp = AssetFilters.new
assetfilters_tmp.deserialize(i)
@Filters << assetfilters_tmp
end
end
unless params['ImageInfo'].nil?
@ImageInfo = ImageInfo.new
@ImageInfo.deserialize(params['ImageInfo'])
end
@Id = params['Id']
end
end
# DescribeAssetImageRegistryVirusList返回参数结构体
class DescribeAssetImageRegistryVirusListResponse < TencentCloud::Common::AbstractModel
# @param List: 镜像漏洞列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type List: Array
# @param TotalCount: 总数量
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :List, :TotalCount, :RequestId
def initialize(list=nil, totalcount=nil, requestid=nil)
@List = list
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['List'].nil?
@List = []
params['List'].each do |i|
imagevirus_tmp = ImageVirus.new
imagevirus_tmp.deserialize(i)
@List << imagevirus_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeAssetImageRegistryVulListExport请求参数结构体
class DescribeAssetImageRegistryVulListExportRequest < TencentCloud::Common::AbstractModel
# @param ExportField: 导出字段
# @type ExportField: Array
# @param Limit: 需要返回的数量，默认为10，最大值为100
# @type Limit: Integer
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
# @param Filters: 过滤条件。
# <li>Level- String - 是否必填：否 - 漏洞级别筛选，</li>
# <li>Name - String - 是否必填：否 - 漏洞名称</li>
# @type Filters: Array
# @param ImageInfo: 镜像信息
# @type ImageInfo: :class:`Tencentcloud::Tcss.v20201101.models.ImageInfo`
# @param Id: 镜像标识Id
# @type Id: Integer
attr_accessor :ExportField, :Limit, :Offset, :Filters, :ImageInfo, :Id
def initialize(exportfield=nil, limit=nil, offset=nil, filters=nil, imageinfo=nil, id=nil)
@ExportField = exportfield
@Limit = limit
@Offset = offset
@Filters = filters
@ImageInfo = imageinfo
@Id = id
end
def deserialize(params)
@ExportField = params['ExportField']
@Limit = params['Limit']
@Offset = params['Offset']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
assetfilters_tmp = AssetFilters.new
assetfilters_tmp.deserialize(i)
@Filters << assetfilters_tmp
end
end
unless params['ImageInfo'].nil?
@ImageInfo = ImageInfo.new
@ImageInfo.deserialize(params['ImageInfo'])
end
@Id = params['Id']
end
end
# DescribeAssetImageRegistryVulListExport返回参数结构体
class DescribeAssetImageRegistryVulListExportResponse < TencentCloud::Common::AbstractModel
# @param DownloadUrl: excel文件下载地址
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DownloadUrl: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :DownloadUrl, :RequestId
def initialize(downloadurl=nil, requestid=nil)
@DownloadUrl = downloadurl
@RequestId = requestid
end
def deserialize(params)
@DownloadUrl = params['DownloadUrl']
@RequestId = params['RequestId']
end
end
# DescribeAssetImageRegistryVulList请求参数结构体
class DescribeAssetImageRegistryVulListRequest < TencentCloud::Common::AbstractModel
# @param Limit: 需要返回的数量，默认为10，最大值为100
# @type Limit: Integer
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
# @param Filters: 过滤条件。
# <li>Level- String - 是否必填：否 - 漏洞级别筛选，</li>
# <li>Name - String - 是否必填：否 - 漏洞名称</li>
# @type Filters: Array
# @param ImageInfo: 镜像信息
# @type ImageInfo: :class:`Tencentcloud::Tcss.v20201101.models.ImageInfo`
# @param Id: 镜像标识Id
# @type Id: Integer
attr_accessor :Limit, :Offset, :Filters, :ImageInfo, :Id
def initialize(limit=nil, offset=nil, filters=nil, imageinfo=nil, id=nil)
@Limit = limit
@Offset = offset
@Filters = filters
@ImageInfo = imageinfo
@Id = id
end
def deserialize(params)
@Limit = params['Limit']
@Offset = params['Offset']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
assetfilters_tmp = AssetFilters.new
assetfilters_tmp.deserialize(i)
@Filters << assetfilters_tmp
end
end
unless params['ImageInfo'].nil?
@ImageInfo = ImageInfo.new
@ImageInfo.deserialize(params['ImageInfo'])
end
@Id = params['Id']
end
end
# DescribeAssetImageRegistryVulList返回参数结构体
class DescribeAssetImageRegistryVulListResponse < TencentCloud::Common::AbstractModel
# @param List: 镜像漏洞列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type List: Array
# @param TotalCount: 总数量
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :List, :TotalCount, :RequestId
def initialize(list=nil, totalcount=nil, requestid=nil)
@List = list
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['List'].nil?
@List = []
params['List'].each do |i|
imagevul_tmp = ImageVul.new
imagevul_tmp.deserialize(i)
@List << imagevul_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeAssetImageRiskListExport请求参数结构体
class DescribeAssetImageRiskListExportRequest < TencentCloud::Common::AbstractModel
# @param ExportField: 导出字段
# @type ExportField: Array
# @param ImageID: 镜像id
# @type ImageID: String
# @param Filters: 过滤条件。
# <li>Level- String - 是否必填：否 - 风险级别 1,2,3,4，</li>
# <li>Behavior - String - 是否必填：否 - 风险行为 1,2,3,4</li>
# <li>Type - String - 是否必填：否 - 风险类型 1,2,</li>
# @type Filters: Array
attr_accessor :ExportField, :ImageID, :Filters
def initialize(exportfield=nil, imageid=nil, filters=nil)
@ExportField = exportfield
@ImageID = imageid
@Filters = filters
end
def deserialize(params)
@ExportField = params['ExportField']
@ImageID = params['ImageID']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
assetfilters_tmp = AssetFilters.new
assetfilters_tmp.deserialize(i)
@Filters << assetfilters_tmp
end
end
end
end
# DescribeAssetImageRiskListExport返回参数结构体
class DescribeAssetImageRiskListExportResponse < TencentCloud::Common::AbstractModel
# @param DownloadUrl: excel文件下载地址
# @type DownloadUrl: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :DownloadUrl, :RequestId
def initialize(downloadurl=nil, requestid=nil)
@DownloadUrl = downloadurl
@RequestId = requestid
end
def deserialize(params)
@DownloadUrl = params['DownloadUrl']
@RequestId = params['RequestId']
end
end
# DescribeAssetImageRiskList请求参数结构体
class DescribeAssetImageRiskListRequest < TencentCloud::Common::AbstractModel
# @param ImageID: 镜像id
# @type ImageID: String
# @param Limit: 需要返回的数量，默认为10，最大值为100
# @type Limit: Integer
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
# @param Filters: 过滤条件。
# <li>Level- String - 是否必填：否 - 风险级别 1,2,3,4，</li>
# <li>Behavior - String - 是否必填：否 - 风险行为 1,2,3,4</li>
# <li>Type - String - 是否必填：否 - 风险类型 1,2,</li>
# @type Filters: Array
# @param By: 排序字段
# @type By: String
# @param Order: 排序方式
# @type Order: String
attr_accessor :ImageID, :Limit, :Offset, :Filters, :By, :Order
def initialize(imageid=nil, limit=nil, offset=nil, filters=nil, by=nil, order=nil)
@ImageID = imageid
@Limit = limit
@Offset = offset
@Filters = filters
@By = by
@Order = order
end
def deserialize(params)
@ImageID = params['ImageID']
@Limit = params['Limit']
@Offset = params['Offset']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
assetfilters_tmp = AssetFilters.new
assetfilters_tmp.deserialize(i)
@Filters << assetfilters_tmp
end
end
@By = params['By']
@Order = params['Order']
end
end
# DescribeAssetImageRiskList返回参数结构体
class DescribeAssetImageRiskListResponse < TencentCloud::Common::AbstractModel
# @param List: 镜像病毒列表
# @type List: Array
# @param TotalCount: 总数量
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :List, :TotalCount, :RequestId
def initialize(list=nil, totalcount=nil, requestid=nil)
@List = list
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['List'].nil?
@List = []
params['List'].each do |i|
imageriskinfo_tmp = ImageRiskInfo.new
imageriskinfo_tmp.deserialize(i)
@List << imageriskinfo_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeAssetImageScanSetting请求参数结构体
class DescribeAssetImageScanSettingRequest < TencentCloud::Common::AbstractModel
def initialize()
end
def deserialize(params)
end
end
# DescribeAssetImageScanSetting返回参数结构体
class DescribeAssetImageScanSettingResponse < TencentCloud::Common::AbstractModel
# @param Enable: 开关
# @type Enable: Boolean
# @param ScanTime: 扫描时刻(完整时间;后端按0时区解析时分秒)
# @type ScanTime: String
# @param ScanPeriod: 扫描间隔
# @type ScanPeriod: Integer
# @param ScanVirus: 扫描木马
# @type ScanVirus: Boolean
# @param ScanRisk: 扫描敏感信息
# @type ScanRisk: Boolean
# @param ScanVul: 扫描漏洞
# @type ScanVul: Boolean
# @param All: 扫描全部镜像
# @type All: Boolean
# @param Images: 自定义扫描镜像
# @type Images: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Enable, :ScanTime, :ScanPeriod, :ScanVirus, :ScanRisk, :ScanVul, :All, :Images, :RequestId
def initialize(enable=nil, scantime=nil, scanperiod=nil, scanvirus=nil, scanrisk=nil, scanvul=nil, all=nil, images=nil, requestid=nil)
@Enable = enable
@ScanTime = scantime
@ScanPeriod = scanperiod
@ScanVirus = scanvirus
@ScanRisk = scanrisk
@ScanVul = scanvul
@All = all
@Images = images
@RequestId = requestid
end
def deserialize(params)
@Enable = params['Enable']
@ScanTime = params['ScanTime']
@ScanPeriod = params['ScanPeriod']
@ScanVirus = params['ScanVirus']
@ScanRisk = params['ScanRisk']
@ScanVul = params['ScanVul']
@All = params['All']
@Images = params['Images']
@RequestId = params['RequestId']
end
end
# DescribeAssetImageScanStatus请求参数结构体
class DescribeAssetImageScanStatusRequest < TencentCloud::Common::AbstractModel
# @param TaskID: 任务id
# @type TaskID: String
attr_accessor :TaskID
def initialize(taskid=nil)
@TaskID = taskid
end
def deserialize(params)
@TaskID = params['TaskID']
end
end
# DescribeAssetImageScanStatus返回参数结构体
class DescribeAssetImageScanStatusResponse < TencentCloud::Common::AbstractModel
# @param ImageTotal: 镜像个数
# @type ImageTotal: Integer
# @param ImageScanCnt: 扫描镜像个数
# @type ImageScanCnt: Integer
# @param Status: 扫描状态
# @type Status: String
# @param Schedule: 扫描进度 ImageScanCnt/ImageTotal *100
# @type Schedule: Integer
# @param SuccessCount: 安全个数
# @type SuccessCount: Integer
# @param RiskCount: 风险个数
# @type RiskCount: Integer
# @param LeftSeconds: 剩余扫描时间
# @type LeftSeconds: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :ImageTotal, :ImageScanCnt, :Status, :Schedule, :SuccessCount, :RiskCount, :LeftSeconds, :RequestId
def initialize(imagetotal=nil, imagescancnt=nil, status=nil, schedule=nil, successcount=nil, riskcount=nil, leftseconds=nil, requestid=nil)
@ImageTotal = imagetotal
@ImageScanCnt = imagescancnt
@Status = status
@Schedule = schedule
@SuccessCount = successcount
@RiskCount = riskcount
@LeftSeconds = leftseconds
@RequestId = requestid
end
def deserialize(params)
@ImageTotal = params['ImageTotal']
@ImageScanCnt = params['ImageScanCnt']
@Status = params['Status']
@Schedule = params['Schedule']
@SuccessCount = params['SuccessCount']
@RiskCount = params['RiskCount']
@LeftSeconds = params['LeftSeconds']
@RequestId = params['RequestId']
end
end
# DescribeAssetImageScanTask请求参数结构体
class DescribeAssetImageScanTaskRequest < TencentCloud::Common::AbstractModel
def initialize()
end
def deserialize(params)
end
end
# DescribeAssetImageScanTask返回参数结构体
class DescribeAssetImageScanTaskResponse < TencentCloud::Common::AbstractModel
# @param TaskID: 任务id
# @type TaskID: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TaskID, :RequestId
def initialize(taskid=nil, requestid=nil)
@TaskID = taskid
@RequestId = requestid
end
def deserialize(params)
@TaskID = params['TaskID']
@RequestId = params['RequestId']
end
end
# DescribeAssetImageSimpleList请求参数结构体
class DescribeAssetImageSimpleListRequest < TencentCloud::Common::AbstractModel
# @param Limit: 需要返回的数量，默认为10，最大值为100
# @type Limit: Integer
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
# @param Filters: 过滤条件。
# <li>Keywords- String - 是否必填：否 - 镜像名、镜像id 称筛选，</li>
# @type Filters: Array
# @param By: 排序字段
# @type By: String
# @param Order: 排序方式 asc,desc
# @type Order: String
attr_accessor :Limit, :Offset, :Filters, :By, :Order
def initialize(limit=nil, offset=nil, filters=nil, by=nil, order=nil)
@Limit = limit
@Offset = offset
@Filters = filters
@By = by
@Order = order
end
def deserialize(params)
@Limit = params['Limit']
@Offset = params['Offset']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
assetfilters_tmp = AssetFilters.new
assetfilters_tmp.deserialize(i)
@Filters << assetfilters_tmp
end
end
@By = params['By']
@Order = params['Order']
end
end
# DescribeAssetImageSimpleList返回参数结构体
class DescribeAssetImageSimpleListResponse < TencentCloud::Common::AbstractModel
# @param List: 镜像列表
# @type List: Array
# @param TotalCount: 总数量
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :List, :TotalCount, :RequestId
def initialize(list=nil, totalcount=nil, requestid=nil)
@List = list
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['List'].nil?
@List = []
params['List'].each do |i|
assetsimpleimageinfo_tmp = AssetSimpleImageInfo.new
assetsimpleimageinfo_tmp.deserialize(i)
@List << assetsimpleimageinfo_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeAssetImageVirusListExport请求参数结构体
class DescribeAssetImageVirusListExportRequest < TencentCloud::Common::AbstractModel
# @param ExportField: 列表支持字段
# @type ExportField: Array
# @param ImageID: 镜像id
# @type ImageID: String
# @param Filters: 过滤条件。
# <li>Name- String - 是否必填：否 - 镜像名称筛选，</li>
# <li>RiskLevel - String - 是否必填：否 - 风险等级 1,2,3,4</li>
# @type Filters: Array
attr_accessor :ExportField, :ImageID, :Filters
def initialize(exportfield=nil, imageid=nil, filters=nil)
@ExportField = exportfield
@ImageID = imageid
@Filters = filters
end
def deserialize(params)
@ExportField = params['ExportField']
@ImageID = params['ImageID']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
assetfilters_tmp = AssetFilters.new
assetfilters_tmp.deserialize(i)
@Filters << assetfilters_tmp
end
end
end
end
# DescribeAssetImageVirusListExport返回参数结构体
class DescribeAssetImageVirusListExportResponse < TencentCloud::Common::AbstractModel
# @param DownloadUrl: excel文件下载地址
# @type DownloadUrl: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :DownloadUrl, :RequestId
def initialize(downloadurl=nil, requestid=nil)
@DownloadUrl = downloadurl
@RequestId = requestid
end
def deserialize(params)
@DownloadUrl = params['DownloadUrl']
@RequestId = params['RequestId']
end
end
# DescribeAssetImageVirusList请求参数结构体
class DescribeAssetImageVirusListRequest < TencentCloud::Common::AbstractModel
# @param ImageID: 镜像id
# @type ImageID: String
# @param Limit: 需要返回的数量，默认为10，最大值为100
# @type Limit: Integer
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
# @param Filters: 过滤条件。
# <li>Name- String - 是否必填：否 - 镜像名称筛选，</li>
# <li>RiskLevel - String - 是否必填：否 - 风险等级 1,2,3,4</li>
# @type Filters: Array
# @param Order: 排序 asc desc
# @type Order: String
# @param By: 排序字段
# @type By: String
attr_accessor :ImageID, :Limit, :Offset, :Filters, :Order, :By
def initialize(imageid=nil, limit=nil, offset=nil, filters=nil, order=nil, by=nil)
@ImageID = imageid
@Limit = limit
@Offset = offset
@Filters = filters
@Order = order
@By = by
end
def deserialize(params)
@ImageID = params['ImageID']
@Limit = params['Limit']
@Offset = params['Offset']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
assetfilters_tmp = AssetFilters.new
assetfilters_tmp.deserialize(i)
@Filters << assetfilters_tmp
end
end
@Order = params['Order']
@By = params['By']
end
end
# DescribeAssetImageVirusList返回参数结构体
class DescribeAssetImageVirusListResponse < TencentCloud::Common::AbstractModel
# @param List: 镜像病毒列表
# @type List: Array
# @param TotalCount: 总数量
# @type TotalCount: Integer
# @param VirusScanStatus: 病毒扫描状态
# 0:未扫描
# 1:扫描中
# 2:扫描完成
# 3:扫描出错
# 4:扫描取消
# @type VirusScanStatus: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :List, :TotalCount, :VirusScanStatus, :RequestId
def initialize(list=nil, totalcount=nil, virusscanstatus=nil, requestid=nil)
@List = list
@TotalCount = totalcount
@VirusScanStatus = virusscanstatus
@RequestId = requestid
end
def deserialize(params)
unless params['List'].nil?
@List = []
params['List'].each do |i|
imagevirusinfo_tmp = ImageVirusInfo.new
imagevirusinfo_tmp.deserialize(i)
@List << imagevirusinfo_tmp
end
end
@TotalCount = params['TotalCount']
@VirusScanStatus = params['VirusScanStatus']
@RequestId = params['RequestId']
end
end
# DescribeAssetImageVulListExport请求参数结构体
class DescribeAssetImageVulListExportRequest < TencentCloud::Common::AbstractModel
# @param ExportField: 导出字段
# @type ExportField: Array
# @param ImageID: 镜像id
# @type ImageID: String
# @param Limit: 需要返回的数量，默认为10，最大值为100
# @type Limit: Integer
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
# @param Filters: 过滤条件。
# <li>Name- String - 是否必填：否 - 漏洞名称名称筛选，</li>
# <li>Level - String - 是否必填：否 - 风险等级 1,2,3,4</li>
# @type Filters: Array
attr_accessor :ExportField, :ImageID, :Limit, :Offset, :Filters
def initialize(exportfield=nil, imageid=nil, limit=nil, offset=nil, filters=nil)
@ExportField = exportfield
@ImageID = imageid
@Limit = limit
@Offset = offset
@Filters = filters
end
def deserialize(params)
@ExportField = params['ExportField']
@ImageID = params['ImageID']
@Limit = params['Limit']
@Offset = params['Offset']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
assetfilters_tmp = AssetFilters.new
assetfilters_tmp.deserialize(i)
@Filters << assetfilters_tmp
end
end
end
end
# DescribeAssetImageVulListExport返回参数结构体
class DescribeAssetImageVulListExportResponse < TencentCloud::Common::AbstractModel
# @param DownloadUrl: excel文件下载地址
# @type DownloadUrl: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :DownloadUrl, :RequestId
def initialize(downloadurl=nil, requestid=nil)
@DownloadUrl = downloadurl
@RequestId = requestid
end
def deserialize(params)
@DownloadUrl = params['DownloadUrl']
@RequestId = params['RequestId']
end
end
# DescribeAssetImageVulList请求参数结构体
class DescribeAssetImageVulListRequest < TencentCloud::Common::AbstractModel
# @param ImageID: 镜像id
# @type ImageID: String
# @param Limit: 需要返回的数量，默认为10，最大值为100
# @type Limit: Integer
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
# @param Filters: 过滤条件。
# <li>Name- String - 是否必填：否 - 漏洞名称名称筛选，</li>
# <li>Level - String - 是否必填：否 - 风险等级 1,2,3,4</li>
# @type Filters: Array
# @param By: 排序字段（Level）
# @type By: String
# @param Order: 排序方式 + -
# @type Order: String
attr_accessor :ImageID, :Limit, :Offset, :Filters, :By, :Order
def initialize(imageid=nil, limit=nil, offset=nil, filters=nil, by=nil, order=nil)
@ImageID = imageid
@Limit = limit
@Offset = offset
@Filters = filters
@By = by
@Order = order
end
def deserialize(params)
@ImageID = params['ImageID']
@Limit = params['Limit']
@Offset = params['Offset']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
assetfilters_tmp = AssetFilters.new
assetfilters_tmp.deserialize(i)
@Filters << assetfilters_tmp
end
end
@By = params['By']
@Order = params['Order']
end
end
# DescribeAssetImageVulList返回参数结构体
class DescribeAssetImageVulListResponse < TencentCloud::Common::AbstractModel
# @param List: 镜像漏洞列表
# @type List: Array
# @param TotalCount: 总数量
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :List, :TotalCount, :RequestId
def initialize(list=nil, totalcount=nil, requestid=nil)
@List = list
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['List'].nil?
@List = []
params['List'].each do |i|
imagesvul_tmp = ImagesVul.new
imagesvul_tmp.deserialize(i)
@List << imagesvul_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeAssetPortList请求参数结构体
class DescribeAssetPortListRequest < TencentCloud::Common::AbstractModel
# @param Limit: 需要返回的数量，默认为10，最大值为100
# @type Limit: Integer
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
# @param Filters: 过滤条件。
# <li>All - String - 是否必填：否 - 模糊查询可选字段</li>
# <li>RunAs - String - 是否必填：否 - 运行用户筛选，</li>
# <li>ContainerID - String - 是否必填：否 - 容器id</li>
# <li>HostID- String - 是否必填：是 - 主机id</li>
# <li>HostIP- string - 是否必填：否 - 主机ip搜索</li>
# <li>ProcessName- string - 是否必填：否 - 进程名搜索</li>
# @type Filters: Array
attr_accessor :Limit, :Offset, :Filters
def initialize(limit=nil, offset=nil, filters=nil)
@Limit = limit
@Offset = offset
@Filters = filters
end
def deserialize(params)
@Limit = params['Limit']
@Offset = params['Offset']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
assetfilters_tmp = AssetFilters.new
assetfilters_tmp.deserialize(i)
@Filters << assetfilters_tmp
end
end
end
end
# DescribeAssetPortList返回参数结构体
class DescribeAssetPortListResponse < TencentCloud::Common::AbstractModel
# @param List: 端口列表
# @type List: Array
# @param TotalCount: 总数量
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :List, :TotalCount, :RequestId
def initialize(list=nil, totalcount=nil, requestid=nil)
@List = list
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['List'].nil?
@List = []
params['List'].each do |i|
portinfo_tmp = PortInfo.new
portinfo_tmp.deserialize(i)
@List << portinfo_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeAssetProcessList请求参数结构体
class DescribeAssetProcessListRequest < TencentCloud::Common::AbstractModel
# @param Limit: 需要返回的数量，默认为10，最大值为100
# @type Limit: Integer
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
# @param Filters: 过滤条件。
# <li>RunAs - String - 是否必填：否 - 运行用户筛选，</li>
# <li>ContainerID - String - 是否必填：否 - 容器id</li>
# <li>HostID- String - 是否必填：是 - 主机id</li>
# <li>HostIP- string - 是否必填：否 - 主机ip搜索</li>
# <li>ProcessName- string - 是否必填：否 - 进程名搜索</li>
# <li>Pid- string - 是否必填：否 - 进程id搜索(关联进程)</li>
# @type Filters: Array
attr_accessor :Limit, :Offset, :Filters
def initialize(limit=nil, offset=nil, filters=nil)
@Limit = limit
@Offset = offset
@Filters = filters
end
def deserialize(params)
@Limit = params['Limit']
@Offset = params['Offset']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
assetfilters_tmp = AssetFilters.new
assetfilters_tmp.deserialize(i)
@Filters << assetfilters_tmp
end
end
end
end
# DescribeAssetProcessList返回参数结构体
class DescribeAssetProcessListResponse < TencentCloud::Common::AbstractModel
# @param List: 端口列表
# @type List: Array
# @param TotalCount: 总数量
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :List, :TotalCount, :RequestId
def initialize(list=nil, totalcount=nil, requestid=nil)
@List = list
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['List'].nil?
@List = []
params['List'].each do |i|
processinfo_tmp = ProcessInfo.new
processinfo_tmp.deserialize(i)
@List << processinfo_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeAssetSummary请求参数结构体
class DescribeAssetSummaryRequest < TencentCloud::Common::AbstractModel
def initialize()
end
def deserialize(params)
end
end
# DescribeAssetSummary返回参数结构体
class DescribeAssetSummaryResponse < TencentCloud::Common::AbstractModel
# @param AppCnt: 应用个数
# @type AppCnt: Integer
# @param ContainerCnt: 容器个数
# @type ContainerCnt: Integer
# @param ContainerPause: 暂停的容器个数
# @type ContainerPause: Integer
# @param ContainerRunning: 运行的容器个数
# @type ContainerRunning: Integer
# @param ContainerStop: 停止运行的容器个数
# @type ContainerStop: Integer
# @param CreateTime: 创建时间
# @type CreateTime: String
# @param DbCnt: 数据库个数
# @type DbCnt: Integer
# @param ImageCnt: 镜像个数
# @type ImageCnt: Integer
# @param HostOnline: 主机在线个数
# @type HostOnline: Integer
# @param HostCnt: 主机个数
# @type HostCnt: Integer
# @param ImageHasRiskInfoCnt: 有风险的镜像个数
# @type ImageHasRiskInfoCnt: Integer
# @param ImageHasVirusCnt: 有病毒的镜像个数
# @type ImageHasVirusCnt: Integer
# @param ImageHasVulsCnt: 有漏洞的镜像个数
# @type ImageHasVulsCnt: Integer
# @param ImageUntrustCnt: 不受信任的镜像个数
# @type ImageUntrustCnt: Integer
# @param ListenPortCnt: 监听的端口个数
# @type ListenPortCnt: Integer
# @param ProcessCnt: 进程个数
# @type ProcessCnt: Integer
# @param WebServiceCnt: web服务个数
# @type WebServiceCnt: Integer
# @param LatestImageScanTime: 最近镜像扫描时间
# @type LatestImageScanTime: String
# @param ImageUnsafeCnt: 风险镜像个数
# @type ImageUnsafeCnt: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :AppCnt, :ContainerCnt, :ContainerPause, :ContainerRunning, :ContainerStop, :CreateTime, :DbCnt, :ImageCnt, :HostOnline, :HostCnt, :ImageHasRiskInfoCnt, :ImageHasVirusCnt, :ImageHasVulsCnt, :ImageUntrustCnt, :ListenPortCnt, :ProcessCnt, :WebServiceCnt, :LatestImageScanTime, :ImageUnsafeCnt, :RequestId
def initialize(appcnt=nil, containercnt=nil, containerpause=nil, containerrunning=nil, containerstop=nil, createtime=nil, dbcnt=nil, imagecnt=nil, hostonline=nil, hostcnt=nil, imagehasriskinfocnt=nil, imagehasviruscnt=nil, imagehasvulscnt=nil, imageuntrustcnt=nil, listenportcnt=nil, processcnt=nil, webservicecnt=nil, latestimagescantime=nil, imageunsafecnt=nil, requestid=nil)
@AppCnt = appcnt
@ContainerCnt = containercnt
@ContainerPause = containerpause
@ContainerRunning = containerrunning
@ContainerStop = containerstop
@CreateTime = createtime
@DbCnt = dbcnt
@ImageCnt = imagecnt
@HostOnline = hostonline
@HostCnt = hostcnt
@ImageHasRiskInfoCnt = imagehasriskinfocnt
@ImageHasVirusCnt = imagehasviruscnt
@ImageHasVulsCnt = imagehasvulscnt
@ImageUntrustCnt = imageuntrustcnt
@ListenPortCnt = listenportcnt
@ProcessCnt = processcnt
@WebServiceCnt = webservicecnt
@LatestImageScanTime = latestimagescantime
@ImageUnsafeCnt = imageunsafecnt
@RequestId = requestid
end
def deserialize(params)
@AppCnt = params['AppCnt']
@ContainerCnt = params['ContainerCnt']
@ContainerPause = params['ContainerPause']
@ContainerRunning = params['ContainerRunning']
@ContainerStop = params['ContainerStop']
@CreateTime = params['CreateTime']
@DbCnt = params['DbCnt']
@ImageCnt = params['ImageCnt']
@HostOnline = params['HostOnline']
@HostCnt = params['HostCnt']
@ImageHasRiskInfoCnt = params['ImageHasRiskInfoCnt']
@ImageHasVirusCnt = params['ImageHasVirusCnt']
@ImageHasVulsCnt = params['ImageHasVulsCnt']
@ImageUntrustCnt = params['ImageUntrustCnt']
@ListenPortCnt = params['ListenPortCnt']
@ProcessCnt = params['ProcessCnt']
@WebServiceCnt = params['WebServiceCnt']
@LatestImageScanTime = params['LatestImageScanTime']
@ImageUnsafeCnt = params['ImageUnsafeCnt']
@RequestId = params['RequestId']
end
end
# DescribeAssetWebServiceList请求参数结构体
class DescribeAssetWebServiceListRequest < TencentCloud::Common::AbstractModel
# @param Limit: 需要返回的数量，默认为10，最大值为100
# @type Limit: Integer
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
# @param Filters: 过滤条件。
# <li>Keywords- String - 是否必填：否 - 模糊查询可选字段</li>
# <li>Type- String - 是否必填：否 - 主机运行状态筛选，"Apache"
# "Jboss"
# "lighttpd"
# "Nginx"
# "Tomcat"</li>
# @type Filters: Array
attr_accessor :Limit, :Offset, :Filters
def initialize(limit=nil, offset=nil, filters=nil)
@Limit = limit
@Offset = offset
@Filters = filters
end
def deserialize(params)
@Limit = params['Limit']
@Offset = params['Offset']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
assetfilters_tmp = AssetFilters.new
assetfilters_tmp.deserialize(i)
@Filters << assetfilters_tmp
end
end
end
end
# DescribeAssetWebServiceList返回参数结构体
class DescribeAssetWebServiceListResponse < TencentCloud::Common::AbstractModel
# @param List: 主机列表
# @type List: Array
# @param TotalCount: 总数量
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :List, :TotalCount, :RequestId
def initialize(list=nil, totalcount=nil, requestid=nil)
@List = list
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['List'].nil?
@List = []
params['List'].each do |i|
serviceinfo_tmp = ServiceInfo.new
serviceinfo_tmp.deserialize(i)
@List << serviceinfo_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeCheckItemList请求参数结构体
class DescribeCheckItemListRequest < TencentCloud::Common::AbstractModel
# @param Offset: 偏移量
# @type Offset: Integer
# @param Limit: 每次查询的最大记录数量
# @type Limit: Integer
# @param Filters: Name 可取值：risk_level风险等级, risk_target检查对象，风险对象,risk_type风险类别,risk_attri检测项所属的风险类型
# @type Filters: Array
attr_accessor :Offset, :Limit, :Filters
def initialize(offset=nil, limit=nil, filters=nil)
@Offset = offset
@Limit = limit
@Filters = filters
end
def deserialize(params)
@Offset = params['Offset']
@Limit = params['Limit']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
compliancefilters_tmp = ComplianceFilters.new
compliancefilters_tmp.deserialize(i)
@Filters << compliancefilters_tmp
end
end
end
end
# DescribeCheckItemList返回参数结构体
class DescribeCheckItemListResponse < TencentCloud::Common::AbstractModel
# @param ClusterCheckItems: 检查项详情数组
# @type ClusterCheckItems: Array
# @param TotalCount: 检查项总数
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :ClusterCheckItems, :TotalCount, :RequestId
def initialize(clustercheckitems=nil, totalcount=nil, requestid=nil)
@ClusterCheckItems = clustercheckitems
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['ClusterCheckItems'].nil?
@ClusterCheckItems = []
params['ClusterCheckItems'].each do |i|
clustercheckitem_tmp = ClusterCheckItem.new
clustercheckitem_tmp.deserialize(i)
@ClusterCheckItems << clustercheckitem_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeClusterDetail请求参数结构体
class DescribeClusterDetailRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群id
# @type ClusterId: String
attr_accessor :ClusterId
def initialize(clusterid=nil)
@ClusterId = clusterid
end
def deserialize(params)
@ClusterId = params['ClusterId']
end
end
# DescribeClusterDetail返回参数结构体
class DescribeClusterDetailResponse < TencentCloud::Common::AbstractModel
# @param ClusterId: 集群id
# @type ClusterId: String
# @param ClusterName: 集群名字
# @type ClusterName: String
# @param ScanTaskProgress: 当前集群扫描任务的进度，100表示扫描完成.
# @type ScanTaskProgress: Integer
# @param ClusterVersion: 集群版本
# @type ClusterVersion: String
# @param ContainerRuntime: 运行时组件
# @type ContainerRuntime: String
# @param ClusterNodeNum: 集群节点数
# @type ClusterNodeNum: Integer
# @param ClusterStatus: 集群状态 (Running 运行中 Creating 创建中 Abnormal 异常 )
# @type ClusterStatus: String
# @param ClusterType: 集群类型：为托管集群MANAGED_CLUSTER、独立集群INDEPENDENT_CLUSTER
# @type ClusterType: String
# @param Region: 集群区域
# @type Region: String
# @param SeriousRiskCount: 严重风险检查项的数量
# @type SeriousRiskCount: Integer
# @param HighRiskCount: 高风险检查项的数量
# @type HighRiskCount: Integer
# @param MiddleRiskCount: 中风险检查项的数量
# @type MiddleRiskCount: Integer
# @param HintRiskCount: 提示风险检查项的数量
# @type HintRiskCount: Integer
# @param CheckStatus: 检查任务的状态
# @type CheckStatus: String
# @param DefenderStatus: 防御容器状态
# @type DefenderStatus: String
# @param TaskCreateTime: 扫描任务创建时间
# @type TaskCreateTime: String
# @param NetworkType: 网络类型.PublicNetwork为公网类型,VPCNetwork为VPC网络
# @type NetworkType: String
# @param ApiServerAddress: API Server地址
# @type ApiServerAddress: String
# @param NodeCount: 节点数
# @type NodeCount: Integer
# @param NamespaceCount: 命名空间数
# @type NamespaceCount: Integer
# @param WorkloadCount: 工作负载数
# @type WorkloadCount: Integer
# @param PodCount: Pod数量
# @type PodCount: Integer
# @param ServiceCount: Service数量
# @type ServiceCount: Integer
# @param IngressCount: Ingress数量
# @type IngressCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :ClusterId, :ClusterName, :ScanTaskProgress, :ClusterVersion, :ContainerRuntime, :ClusterNodeNum, :ClusterStatus, :ClusterType, :Region, :SeriousRiskCount, :HighRiskCount, :MiddleRiskCount, :HintRiskCount, :CheckStatus, :DefenderStatus, :TaskCreateTime, :NetworkType, :ApiServerAddress, :NodeCount, :NamespaceCount, :WorkloadCount, :PodCount, :ServiceCount, :IngressCount, :RequestId
def initialize(clusterid=nil, clustername=nil, scantaskprogress=nil, clusterversion=nil, containerruntime=nil, clusternodenum=nil, clusterstatus=nil, clustertype=nil, region=nil, seriousriskcount=nil, highriskcount=nil, middleriskcount=nil, hintriskcount=nil, checkstatus=nil, defenderstatus=nil, taskcreatetime=nil, networktype=nil, apiserveraddress=nil, nodecount=nil, namespacecount=nil, workloadcount=nil, podcount=nil, servicecount=nil, ingresscount=nil, requestid=nil)
@ClusterId = clusterid
@ClusterName = clustername
@ScanTaskProgress = scantaskprogress
@ClusterVersion = clusterversion
@ContainerRuntime = containerruntime
@ClusterNodeNum = clusternodenum
@ClusterStatus = clusterstatus
@ClusterType = clustertype
@Region = region
@SeriousRiskCount = seriousriskcount
@HighRiskCount = highriskcount
@MiddleRiskCount = middleriskcount
@HintRiskCount = hintriskcount
@CheckStatus = checkstatus
@DefenderStatus = defenderstatus
@TaskCreateTime = taskcreatetime
@NetworkType = networktype
@ApiServerAddress = apiserveraddress
@NodeCount = nodecount
@NamespaceCount = namespacecount
@WorkloadCount = workloadcount
@PodCount = podcount
@ServiceCount = servicecount
@IngressCount = ingresscount
@RequestId = requestid
end
def deserialize(params)
@ClusterId = params['ClusterId']
@ClusterName = params['ClusterName']
@ScanTaskProgress = params['ScanTaskProgress']
@ClusterVersion = params['ClusterVersion']
@ContainerRuntime = params['ContainerRuntime']
@ClusterNodeNum = params['ClusterNodeNum']
@ClusterStatus = params['ClusterStatus']
@ClusterType = params['ClusterType']
@Region = params['Region']
@SeriousRiskCount = params['SeriousRiskCount']
@HighRiskCount = params['HighRiskCount']
@MiddleRiskCount = params['MiddleRiskCount']
@HintRiskCount = params['HintRiskCount']
@CheckStatus = params['CheckStatus']
@DefenderStatus = params['DefenderStatus']
@TaskCreateTime = params['TaskCreateTime']
@NetworkType = params['NetworkType']
@ApiServerAddress = params['ApiServerAddress']
@NodeCount = params['NodeCount']
@NamespaceCount = params['NamespaceCount']
@WorkloadCount = params['WorkloadCount']
@PodCount = params['PodCount']
@ServiceCount = params['ServiceCount']
@IngressCount = params['IngressCount']
@RequestId = params['RequestId']
end
end
# DescribeClusterSummary请求参数结构体
class DescribeClusterSummaryRequest < TencentCloud::Common::AbstractModel
def initialize()
end
def deserialize(params)
end
end
# DescribeClusterSummary返回参数结构体
class DescribeClusterSummaryResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 集群总数
# @type TotalCount: Integer
# @param RiskClusterCount: 有风险的集群数量
# @type RiskClusterCount: Integer
# @param UncheckClusterCount: 未检查的集群数量
# @type UncheckClusterCount: Integer
# @param ManagedClusterCount: 托管集群数量
# @type ManagedClusterCount: Integer
# @param IndependentClusterCount: 独立集群数量
# @type IndependentClusterCount: Integer
# @param NoRiskClusterCount: 无风险的集群数量
# @type NoRiskClusterCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :RiskClusterCount, :UncheckClusterCount, :ManagedClusterCount, :IndependentClusterCount, :NoRiskClusterCount, :RequestId
def initialize(totalcount=nil, riskclustercount=nil, uncheckclustercount=nil, managedclustercount=nil, independentclustercount=nil, noriskclustercount=nil, requestid=nil)
@TotalCount = totalcount
@RiskClusterCount = riskclustercount
@UncheckClusterCount = uncheckclustercount
@ManagedClusterCount = managedclustercount
@IndependentClusterCount = independentclustercount
@NoRiskClusterCount = noriskclustercount
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
@RiskClusterCount = params['RiskClusterCount']
@UncheckClusterCount = params['UncheckClusterCount']
@ManagedClusterCount = params['ManagedClusterCount']
@IndependentClusterCount = params['IndependentClusterCount']
@NoRiskClusterCount = params['NoRiskClusterCount']
@RequestId = params['RequestId']
end
end
# DescribeComplianceAssetDetailInfo请求参数结构体
class DescribeComplianceAssetDetailInfoRequest < TencentCloud::Common::AbstractModel
# @param CustomerAssetId: 客户资产ID。
# @type CustomerAssetId: Integer
attr_accessor :CustomerAssetId
def initialize(customerassetid=nil)
@CustomerAssetId = customerassetid
end
def deserialize(params)
@CustomerAssetId = params['CustomerAssetId']
end
end
# DescribeComplianceAssetDetailInfo返回参数结构体
class DescribeComplianceAssetDetailInfoResponse < TencentCloud::Common::AbstractModel
# @param AssetDetailInfo: 某资产的详情。
# @type AssetDetailInfo: :class:`Tencentcloud::Tcss.v20201101.models.ComplianceAssetDetailInfo`
# @param ContainerDetailInfo: 当资产为容器时，返回此字段。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ContainerDetailInfo: :class:`Tencentcloud::Tcss.v20201101.models.ComplianceContainerDetailInfo`
# @param ImageDetailInfo: 当资产为镜像时，返回此字段。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ImageDetailInfo: :class:`Tencentcloud::Tcss.v20201101.models.ComplianceImageDetailInfo`
# @param HostDetailInfo: 当资产为主机时，返回此字段。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type HostDetailInfo: :class:`Tencentcloud::Tcss.v20201101.models.ComplianceHostDetailInfo`
# @param K8SDetailInfo: 当资产为K8S时，返回此字段。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type K8SDetailInfo: :class:`Tencentcloud::Tcss.v20201101.models.ComplianceK8SDetailInfo`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :AssetDetailInfo, :ContainerDetailInfo, :ImageDetailInfo, :HostDetailInfo, :K8SDetailInfo, :RequestId
def initialize(assetdetailinfo=nil, containerdetailinfo=nil, imagedetailinfo=nil, hostdetailinfo=nil, k8sdetailinfo=nil, requestid=nil)
@AssetDetailInfo = assetdetailinfo
@ContainerDetailInfo = containerdetailinfo
@ImageDetailInfo = imagedetailinfo
@HostDetailInfo = hostdetailinfo
@K8SDetailInfo = k8sdetailinfo
@RequestId = requestid
end
def deserialize(params)
unless params['AssetDetailInfo'].nil?
@AssetDetailInfo = ComplianceAssetDetailInfo.new
@AssetDetailInfo.deserialize(params['AssetDetailInfo'])
end
unless params['ContainerDetailInfo'].nil?
@ContainerDetailInfo = ComplianceContainerDetailInfo.new
@ContainerDetailInfo.deserialize(params['ContainerDetailInfo'])
end
unless params['ImageDetailInfo'].nil?
@ImageDetailInfo = ComplianceImageDetailInfo.new
@ImageDetailInfo.deserialize(params['ImageDetailInfo'])
end
unless params['HostDetailInfo'].nil?
@HostDetailInfo = ComplianceHostDetailInfo.new
@HostDetailInfo.deserialize(params['HostDetailInfo'])
end
unless params['K8SDetailInfo'].nil?
@K8SDetailInfo = ComplianceK8SDetailInfo.new
@K8SDetailInfo.deserialize(params['K8SDetailInfo'])
end
@RequestId = params['RequestId']
end
end
# DescribeComplianceAssetList请求参数结构体
class DescribeComplianceAssetListRequest < TencentCloud::Common::AbstractModel
# @param AssetTypeSet: 资产类型列表。
# @type AssetTypeSet: Array
# @param Offset: 起始偏移量，默认为0。
# @type Offset: Integer
# @param Limit: 返回的数据量，默认为10，最大为100。
# @type Limit: Integer
# @param Filters: 查询过滤器
# @type Filters: Array
attr_accessor :AssetTypeSet, :Offset, :Limit, :Filters
def initialize(assettypeset=nil, offset=nil, limit=nil, filters=nil)
@AssetTypeSet = assettypeset
@Offset = offset
@Limit = limit
@Filters = filters
end
def deserialize(params)
@AssetTypeSet = params['AssetTypeSet']
@Offset = params['Offset']
@Limit = params['Limit']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
compliancefilters_tmp = ComplianceFilters.new
compliancefilters_tmp.deserialize(i)
@Filters << compliancefilters_tmp
end
end
end
end
# DescribeComplianceAssetList返回参数结构体
class DescribeComplianceAssetListResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 返回资产的总数。
# @type TotalCount: Integer
# @param AssetInfoList: 返回各类资产的列表。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AssetInfoList: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :AssetInfoList, :RequestId
def initialize(totalcount=nil, assetinfolist=nil, requestid=nil)
@TotalCount = totalcount
@AssetInfoList = assetinfolist
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['AssetInfoList'].nil?
@AssetInfoList = []
params['AssetInfoList'].each do |i|
complianceassetinfo_tmp = ComplianceAssetInfo.new
complianceassetinfo_tmp.deserialize(i)
@AssetInfoList << complianceassetinfo_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeComplianceAssetPolicyItemList请求参数结构体
class DescribeComplianceAssetPolicyItemListRequest < TencentCloud::Common::AbstractModel
# @param CustomerAssetId: 客户资产的ID。
# @type CustomerAssetId: Integer
# @param Offset: 起始偏移量，默认为0。
# @type Offset: Integer
# @param Limit: 要获取的数据量，默认为10，最大为100。
# @type Limit: Integer
# @param Filters: 过滤器列表。Name字段支持
# RiskLevel
# @type Filters: Array
attr_accessor :CustomerAssetId, :Offset, :Limit, :Filters
def initialize(customerassetid=nil, offset=nil, limit=nil, filters=nil)
@CustomerAssetId = customerassetid
@Offset = offset
@Limit = limit
@Filters = filters
end
def deserialize(params)
@CustomerAssetId = params['CustomerAssetId']
@Offset = params['Offset']
@Limit = params['Limit']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
compliancefilters_tmp = ComplianceFilters.new
compliancefilters_tmp.deserialize(i)
@Filters << compliancefilters_tmp
end
end
end
end
# DescribeComplianceAssetPolicyItemList返回参数结构体
class DescribeComplianceAssetPolicyItemListResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 返回检测项的总数。如果用户未启用基线检查，此处返回0。
# @type TotalCount: Integer
# @param AssetPolicyItemList: 返回某个资产下的检测项的列表。
# @type AssetPolicyItemList: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :AssetPolicyItemList, :RequestId
def initialize(totalcount=nil, assetpolicyitemlist=nil, requestid=nil)
@TotalCount = totalcount
@AssetPolicyItemList = assetpolicyitemlist
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['AssetPolicyItemList'].nil?
@AssetPolicyItemList = []
params['AssetPolicyItemList'].each do |i|
complianceassetpolicyitem_tmp = ComplianceAssetPolicyItem.new
complianceassetpolicyitem_tmp.deserialize(i)
@AssetPolicyItemList << complianceassetpolicyitem_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeCompliancePeriodTaskList请求参数结构体
class DescribeCompliancePeriodTaskListRequest < TencentCloud::Common::AbstractModel
# @param AssetType: 资产的类型，取值为：
# ASSET_CONTAINER, 容器
# ASSET_IMAGE, 镜像
# ASSET_HOST, 主机
# ASSET_K8S, K8S资产
# @type AssetType: String
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
# @param Limit: 需要返回的数量，默认为10，最大值为100。
# @type Limit: Integer
attr_accessor :AssetType, :Offset, :Limit
def initialize(assettype=nil, offset=nil, limit=nil)
@AssetType = assettype
@Offset = offset
@Limit = limit
end
def deserialize(params)
@AssetType = params['AssetType']
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribeCompliancePeriodTaskList返回参数结构体
class DescribeCompliancePeriodTaskListResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 定时任务的总量。
# @type TotalCount: Integer
# @param PeriodTaskSet: 定时任务信息的列表
# @type PeriodTaskSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :PeriodTaskSet, :RequestId
def initialize(totalcount=nil, periodtaskset=nil, requestid=nil)
@TotalCount = totalcount
@PeriodTaskSet = periodtaskset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['PeriodTaskSet'].nil?
@PeriodTaskSet = []
params['PeriodTaskSet'].each do |i|
complianceperiodtask_tmp = CompliancePeriodTask.new
complianceperiodtask_tmp.deserialize(i)
@PeriodTaskSet << complianceperiodtask_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeCompliancePolicyItemAffectedAssetList请求参数结构体
class DescribeCompliancePolicyItemAffectedAssetListRequest < TencentCloud::Common::AbstractModel
# @param CustomerPolicyItemId: DescribeComplianceTaskPolicyItemSummaryList返回的CustomerPolicyItemId，表示检测项的ID。
# @type CustomerPolicyItemId: Integer
# @param Offset: 起始偏移量，默认为0。
# @type Offset: Integer
# @param Limit: 需要返回的数量，默认为10，最大值为100。
# @type Limit: Integer
# @param Filters: 过滤条件。
# Name - String
# Name 可取值：NodeName, CheckResult
# @type Filters: Array
attr_accessor :CustomerPolicyItemId, :Offset, :Limit, :Filters
def initialize(customerpolicyitemid=nil, offset=nil, limit=nil, filters=nil)
@CustomerPolicyItemId = customerpolicyitemid
@Offset = offset
@Limit = limit
@Filters = filters
end
def deserialize(params)
@CustomerPolicyItemId = params['CustomerPolicyItemId']
@Offset = params['Offset']
@Limit = params['Limit']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
compliancefilters_tmp = ComplianceFilters.new
compliancefilters_tmp.deserialize(i)
@Filters << compliancefilters_tmp
end
end
end
end
# DescribeCompliancePolicyItemAffectedAssetList返回参数结构体
class DescribeCompliancePolicyItemAffectedAssetListResponse < TencentCloud::Common::AbstractModel
# @param AffectedAssetList: 返回各检测项所影响的资产的列表。
# @type AffectedAssetList: Array
# @param TotalCount: 检测项影响的资产的总数。
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :AffectedAssetList, :TotalCount, :RequestId
def initialize(affectedassetlist=nil, totalcount=nil, requestid=nil)
@AffectedAssetList = affectedassetlist
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['AffectedAssetList'].nil?
@AffectedAssetList = []
params['AffectedAssetList'].each do |i|
complianceaffectedasset_tmp = ComplianceAffectedAsset.new
complianceaffectedasset_tmp.deserialize(i)
@AffectedAssetList << complianceaffectedasset_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeCompliancePolicyItemAffectedSummary请求参数结构体
class DescribeCompliancePolicyItemAffectedSummaryRequest < TencentCloud::Common::AbstractModel
# @param CustomerPolicyItemId: DescribeComplianceTaskPolicyItemSummaryList返回的CustomerPolicyItemId，表示检测项的ID。
# @type CustomerPolicyItemId: Integer
attr_accessor :CustomerPolicyItemId
def initialize(customerpolicyitemid=nil)
@CustomerPolicyItemId = customerpolicyitemid
end
def deserialize(params)
@CustomerPolicyItemId = params['CustomerPolicyItemId']
end
end
# DescribeCompliancePolicyItemAffectedSummary返回参数结构体
class DescribeCompliancePolicyItemAffectedSummaryResponse < TencentCloud::Common::AbstractModel
# @param PolicyItemSummary: 返回各检测项影响的资产的汇总信息。
# @type PolicyItemSummary: :class:`Tencentcloud::Tcss.v20201101.models.CompliancePolicyItemSummary`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :PolicyItemSummary, :RequestId
def initialize(policyitemsummary=nil, requestid=nil)
@PolicyItemSummary = policyitemsummary
@RequestId = requestid
end
def deserialize(params)
unless params['PolicyItemSummary'].nil?
@PolicyItemSummary = CompliancePolicyItemSummary.new
@PolicyItemSummary.deserialize(params['PolicyItemSummary'])
end
@RequestId = params['RequestId']
end
end
# DescribeComplianceScanFailedAssetList请求参数结构体
class DescribeComplianceScanFailedAssetListRequest < TencentCloud::Common::AbstractModel
# @param AssetTypeSet: 资产类型列表。
# ASSET_CONTAINER, 容器
# ASSET_IMAGE, 镜像
# ASSET_HOST, 主机
# ASSET_K8S, K8S资产
# @type AssetTypeSet: Array
# @param Offset: 起始偏移量，默认为0。
# @type Offset: Integer
# @param Limit: 返回的数据量，默认为10，最大为100。
# @type Limit: Integer
# @param Filters: 查询过滤器
# @type Filters: Array
attr_accessor :AssetTypeSet, :Offset, :Limit, :Filters
def initialize(assettypeset=nil, offset=nil, limit=nil, filters=nil)
@AssetTypeSet = assettypeset
@Offset = offset
@Limit = limit
@Filters = filters
end
def deserialize(params)
@AssetTypeSet = params['AssetTypeSet']
@Offset = params['Offset']
@Limit = params['Limit']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
compliancefilters_tmp = ComplianceFilters.new
compliancefilters_tmp.deserialize(i)
@Filters << compliancefilters_tmp
end
end
end
end
# DescribeComplianceScanFailedAssetList返回参数结构体
class DescribeComplianceScanFailedAssetListResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 返回检测失败的资产的总数。
# @type TotalCount: Integer
# @param ScanFailedAssetList: 返回各类检测失败的资产的汇总信息的列表。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ScanFailedAssetList: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :ScanFailedAssetList, :RequestId
def initialize(totalcount=nil, scanfailedassetlist=nil, requestid=nil)
@TotalCount = totalcount
@ScanFailedAssetList = scanfailedassetlist
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['ScanFailedAssetList'].nil?
@ScanFailedAssetList = []
params['ScanFailedAssetList'].each do |i|
compliancescanfailedasset_tmp = ComplianceScanFailedAsset.new
compliancescanfailedasset_tmp.deserialize(i)
@ScanFailedAssetList << compliancescanfailedasset_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeComplianceTaskAssetSummary请求参数结构体
class DescribeComplianceTaskAssetSummaryRequest < TencentCloud::Common::AbstractModel
# @param AssetTypeSet: 资产类型列表。
# ASSET_CONTAINER, 容器
# ASSET_IMAGE, 镜像
# ASSET_HOST, 主机
# ASSET_K8S, K8S资产
# @type AssetTypeSet: Array
attr_accessor :AssetTypeSet
def initialize(assettypeset=nil)
@AssetTypeSet = assettypeset
end
def deserialize(params)
@AssetTypeSet = params['AssetTypeSet']
end
end
# DescribeComplianceTaskAssetSummary返回参数结构体
class DescribeComplianceTaskAssetSummaryResponse < TencentCloud::Common::AbstractModel
# @param Status: 返回用户的状态，
# USER_UNINIT: 用户未初始化。
# USER_INITIALIZING，表示用户正在初始化环境。
# USER_NORMAL: 正常状态。
# @type Status: String
# @param AssetSummaryList: 返回各类资产的汇总信息的列表。
# @type AssetSummaryList: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Status, :AssetSummaryList, :RequestId
def initialize(status=nil, assetsummarylist=nil, requestid=nil)
@Status = status
@AssetSummaryList = assetsummarylist
@RequestId = requestid
end
def deserialize(params)
@Status = params['Status']
unless params['AssetSummaryList'].nil?
@AssetSummaryList = []
params['AssetSummaryList'].each do |i|
complianceassetsummary_tmp = ComplianceAssetSummary.new
complianceassetsummary_tmp.deserialize(i)
@AssetSummaryList << complianceassetsummary_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeComplianceTaskPolicyItemSummaryList请求参数结构体
class DescribeComplianceTaskPolicyItemSummaryListRequest < TencentCloud::Common::AbstractModel
# @param AssetType: 资产类型。仅查询与指定资产类型相关的检测项。
# ASSET_CONTAINER, 容器
# ASSET_IMAGE, 镜像
# ASSET_HOST, 主机
# ASSET_K8S, K8S资产
# @type AssetType: String
# @param Offset: 起始偏移量，默认为0。
# @type Offset: Integer
# @param Limit: 需要返回的数量，默认为10，最大值为100。
# @type Limit: Integer
# @param Filters: 过滤条件。
# Name - String
# Name 可取值：ItemType, StandardId, RiskLevel。
# 当为K8S资产时，还可取ClusterName。
# @type Filters: Array
attr_accessor :AssetType, :Offset, :Limit, :Filters
def initialize(assettype=nil, offset=nil, limit=nil, filters=nil)
@AssetType = assettype
@Offset = offset
@Limit = limit
@Filters = filters
end
def deserialize(params)
@AssetType = params['AssetType']
@Offset = params['Offset']
@Limit = params['Limit']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
compliancefilters_tmp = ComplianceFilters.new
compliancefilters_tmp.deserialize(i)
@Filters << compliancefilters_tmp
end
end
end
end
# DescribeComplianceTaskPolicyItemSummaryList返回参数结构体
class DescribeComplianceTaskPolicyItemSummaryListResponse < TencentCloud::Common::AbstractModel
# @param TaskId: 返回最近一次合规检查任务的ID。这个任务为本次所展示数据的来源。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TaskId: Integer
# @param TotalCount: 返回检测项的总数。
# @type TotalCount: Integer
# @param PolicyItemSummaryList: 返回各检测项对应的汇总信息的列表。
# @type PolicyItemSummaryList: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TaskId, :TotalCount, :PolicyItemSummaryList, :RequestId
def initialize(taskid=nil, totalcount=nil, policyitemsummarylist=nil, requestid=nil)
@TaskId = taskid
@TotalCount = totalcount
@PolicyItemSummaryList = policyitemsummarylist
@RequestId = requestid
end
def deserialize(params)
@TaskId = params['TaskId']
@TotalCount = params['TotalCount']
unless params['PolicyItemSummaryList'].nil?
@PolicyItemSummaryList = []
params['PolicyItemSummaryList'].each do |i|
compliancepolicyitemsummary_tmp = CompliancePolicyItemSummary.new
compliancepolicyitemsummary_tmp.deserialize(i)
@PolicyItemSummaryList << compliancepolicyitemsummary_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeComplianceWhitelistItemList请求参数结构体
class DescribeComplianceWhitelistItemListRequest < TencentCloud::Common::AbstractModel
# @param Offset: 起始偏移量，默认为0。
# @type Offset: Integer
# @param Limit: 要获取的数量，默认为10，最大为100。
# @type Limit: Integer
# @param AssetTypeSet: 资产类型列表。
# @type AssetTypeSet: Array
# @param Filters: 查询过滤器
# @type Filters: Array
# @param By: 排序字段
# @type By: String
# @param Order: 排序方式 desc asc
# @type Order: String
attr_accessor :Offset, :Limit, :AssetTypeSet, :Filters, :By, :Order
def initialize(offset=nil, limit=nil, assettypeset=nil, filters=nil, by=nil, order=nil)
@Offset = offset
@Limit = limit
@AssetTypeSet = assettypeset
@Filters = filters
@By = by
@Order = order
end
def deserialize(params)
@Offset = params['Offset']
@Limit = params['Limit']
@AssetTypeSet = params['AssetTypeSet']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
compliancefilters_tmp = ComplianceFilters.new
compliancefilters_tmp.deserialize(i)
@Filters << compliancefilters_tmp
end
end
@By = params['By']
@Order = params['Order']
end
end
# DescribeComplianceWhitelistItemList返回参数结构体
class DescribeComplianceWhitelistItemListResponse < TencentCloud::Common::AbstractModel
# @param WhitelistItemSet: 白名单项的列表。
# @type WhitelistItemSet: Array
# @param TotalCount: 白名单项的总数。
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :WhitelistItemSet, :TotalCount, :RequestId
def initialize(whitelistitemset=nil, totalcount=nil, requestid=nil)
@WhitelistItemSet = whitelistitemset
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['WhitelistItemSet'].nil?
@WhitelistItemSet = []
params['WhitelistItemSet'].each do |i|
compliancewhitelistitem_tmp = ComplianceWhitelistItem.new
compliancewhitelistitem_tmp.deserialize(i)
@WhitelistItemSet << compliancewhitelistitem_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeContainerAssetSummary请求参数结构体
class DescribeContainerAssetSummaryRequest < TencentCloud::Common::AbstractModel
def initialize()
end
def deserialize(params)
end
end
# DescribeContainerAssetSummary返回参数结构体
class DescribeContainerAssetSummaryResponse < TencentCloud::Common::AbstractModel
# @param ContainerTotalCnt: 容器总数
# @type ContainerTotalCnt: Integer
# @param ContainerRunningCnt: 正在运行容器数量
# @type ContainerRunningCnt: Integer
# @param ContainerPauseCnt: 暂停运行容器数量
# @type ContainerPauseCnt: Integer
# @param ContainerStopped: 停止运行容器数量
# @type ContainerStopped: Integer
# @param ImageCnt: 本地镜像数量
# @type ImageCnt: Integer
# @param HostCnt: 主机节点数量
# @type HostCnt: Integer
# @param HostRunningCnt: 主机正在运行节点数量
# @type HostRunningCnt: Integer
# @param HostOfflineCnt: 主机离线节点数量
# @type HostOfflineCnt: Integer
# @param ImageRegistryCnt: 镜像仓库数量
# @type ImageRegistryCnt: Integer
# @param ImageTotalCnt: 镜像总数
# @type ImageTotalCnt: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :ContainerTotalCnt, :ContainerRunningCnt, :ContainerPauseCnt, :ContainerStopped, :ImageCnt, :HostCnt, :HostRunningCnt, :HostOfflineCnt, :ImageRegistryCnt, :ImageTotalCnt, :RequestId
def initialize(containertotalcnt=nil, containerrunningcnt=nil, containerpausecnt=nil, containerstopped=nil, imagecnt=nil, hostcnt=nil, hostrunningcnt=nil, hostofflinecnt=nil, imageregistrycnt=nil, imagetotalcnt=nil, requestid=nil)
@ContainerTotalCnt = containertotalcnt
@ContainerRunningCnt = containerrunningcnt
@ContainerPauseCnt = containerpausecnt
@ContainerStopped = containerstopped
@ImageCnt = imagecnt
@HostCnt = hostcnt
@HostRunningCnt = hostrunningcnt
@HostOfflineCnt = hostofflinecnt
@ImageRegistryCnt = imageregistrycnt
@ImageTotalCnt = imagetotalcnt
@RequestId = requestid
end
def deserialize(params)
@ContainerTotalCnt = params['ContainerTotalCnt']
@ContainerRunningCnt = params['ContainerRunningCnt']
@ContainerPauseCnt = params['ContainerPauseCnt']
@ContainerStopped = params['ContainerStopped']
@ImageCnt = params['ImageCnt']
@HostCnt = params['HostCnt']
@HostRunningCnt = params['HostRunningCnt']
@HostOfflineCnt = params['HostOfflineCnt']
@ImageRegistryCnt = params['ImageRegistryCnt']
@ImageTotalCnt = params['ImageTotalCnt']
@RequestId = params['RequestId']
end
end
# DescribeContainerSecEventSummary请求参数结构体
class DescribeContainerSecEventSummaryRequest < TencentCloud::Common::AbstractModel
def initialize()
end
def deserialize(params)
end
end
# DescribeContainerSecEventSummary返回参数结构体
class DescribeContainerSecEventSummaryResponse < TencentCloud::Common::AbstractModel
# @param UnhandledEscapeCnt: 未处理逃逸事件
# @type UnhandledEscapeCnt: Integer
# @param UnhandledReverseShellCnt: 未处理反弹shell事件
# @type UnhandledReverseShellCnt: Integer
# @param UnhandledRiskSyscallCnt: 未处理高危系统调用
# @type UnhandledRiskSyscallCnt: Integer
# @param UnhandledAbnormalProcessCnt: 未处理异常进程
# @type UnhandledAbnormalProcessCnt: Integer
# @param UnhandledFileCnt: 未处理文件篡改
# @type UnhandledFileCnt: Integer
# @param UnhandledVirusEventCnt: 未处理木马事件
# @type UnhandledVirusEventCnt: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :UnhandledEscapeCnt, :UnhandledReverseShellCnt, :UnhandledRiskSyscallCnt, :UnhandledAbnormalProcessCnt, :UnhandledFileCnt, :UnhandledVirusEventCnt, :RequestId
def initialize(unhandledescapecnt=nil, unhandledreverseshellcnt=nil, unhandledrisksyscallcnt=nil, unhandledabnormalprocesscnt=nil, unhandledfilecnt=nil, unhandledviruseventcnt=nil, requestid=nil)
@UnhandledEscapeCnt = unhandledescapecnt
@UnhandledReverseShellCnt = unhandledreverseshellcnt
@UnhandledRiskSyscallCnt = unhandledrisksyscallcnt
@UnhandledAbnormalProcessCnt = unhandledabnormalprocesscnt
@UnhandledFileCnt = unhandledfilecnt
@UnhandledVirusEventCnt = unhandledviruseventcnt
@RequestId = requestid
end
def deserialize(params)
@UnhandledEscapeCnt = params['UnhandledEscapeCnt']
@UnhandledReverseShellCnt = params['UnhandledReverseShellCnt']
@UnhandledRiskSyscallCnt = params['UnhandledRiskSyscallCnt']
@UnhandledAbnormalProcessCnt = params['UnhandledAbnormalProcessCnt']
@UnhandledFileCnt = params['UnhandledFileCnt']
@UnhandledVirusEventCnt = params['UnhandledVirusEventCnt']
@RequestId = params['RequestId']
end
end
# DescribeEscapeEventDetail请求参数结构体
class DescribeEscapeEventDetailRequest < TencentCloud::Common::AbstractModel
# @param EventId: 事件唯一id
# @type EventId: String
attr_accessor :EventId
def initialize(eventid=nil)
@EventId = eventid
end
def deserialize(params)
@EventId = params['EventId']
end
end
# DescribeEscapeEventDetail返回参数结构体
class DescribeEscapeEventDetailResponse < TencentCloud::Common::AbstractModel
# @param EventBaseInfo: 事件基本信息
# @type EventBaseInfo: :class:`Tencentcloud::Tcss.v20201101.models.RunTimeEventBaseInfo`
# @param ProcessInfo: 进程信息
# @type ProcessInfo: :class:`Tencentcloud::Tcss.v20201101.models.ProcessDetailInfo`
# @param EventDetail: 事件描述
# @type EventDetail: :class:`Tencentcloud::Tcss.v20201101.models.EscapeEventDescription`
# @param ParentProcessInfo: 父进程信息
# @type ParentProcessInfo: :class:`Tencentcloud::Tcss.v20201101.models.ProcessBaseInfo`
# @param AncestorProcessInfo: 祖先进程信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AncestorProcessInfo: :class:`Tencentcloud::Tcss.v20201101.models.ProcessBaseInfo`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :EventBaseInfo, :ProcessInfo, :EventDetail, :ParentProcessInfo, :AncestorProcessInfo, :RequestId
def initialize(eventbaseinfo=nil, processinfo=nil, eventdetail=nil, parentprocessinfo=nil, ancestorprocessinfo=nil, requestid=nil)
@EventBaseInfo = eventbaseinfo
@ProcessInfo = processinfo
@EventDetail = eventdetail
@ParentProcessInfo = parentprocessinfo
@AncestorProcessInfo = ancestorprocessinfo
@RequestId = requestid
end
def deserialize(params)
unless params['EventBaseInfo'].nil?
@EventBaseInfo = RunTimeEventBaseInfo.new
@EventBaseInfo.deserialize(params['EventBaseInfo'])
end
unless params['ProcessInfo'].nil?
@ProcessInfo = ProcessDetailInfo.new
@ProcessInfo.deserialize(params['ProcessInfo'])
end
unless params['EventDetail'].nil?
@EventDetail = EscapeEventDescription.new
@EventDetail.deserialize(params['EventDetail'])
end
unless params['ParentProcessInfo'].nil?
@ParentProcessInfo = ProcessBaseInfo.new
@ParentProcessInfo.deserialize(params['ParentProcessInfo'])
end
unless params['AncestorProcessInfo'].nil?
@AncestorProcessInfo = ProcessBaseInfo.new
@AncestorProcessInfo.deserialize(params['AncestorProcessInfo'])
end
@RequestId = params['RequestId']
end
end
# DescribeEscapeEventInfo请求参数结构体
class DescribeEscapeEventInfoRequest < TencentCloud::Common::AbstractModel
# @param Limit: 需要返回的数量，默认为10，最大值为100
# @type Limit: Integer
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
# @param Filters: 过滤参数,Status：EVENT_UNDEAL:未处理，EVENT_DEALED:已处理，EVENT_INGNORE:忽略
# @type Filters: Array
# @param Order: 升序降序,asc desc
# @type Order: String
# @param By: 排序字段
# @type By: String
attr_accessor :Limit, :Offset, :Filters, :Order, :By
def initialize(limit=nil, offset=nil, filters=nil, order=nil, by=nil)
@Limit = limit
@Offset = offset
@Filters = filters
@Order = order
@By = by
end
def deserialize(params)
@Limit = params['Limit']
@Offset = params['Offset']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
runtimefilters_tmp = RunTimeFilters.new
runtimefilters_tmp.deserialize(i)
@Filters << runtimefilters_tmp
end
end
@Order = params['Order']
@By = params['By']
end
end
# DescribeEscapeEventInfo返回参数结构体
class DescribeEscapeEventInfoResponse < TencentCloud::Common::AbstractModel
# @param EventSet: 逃逸事件数组
# @type EventSet: Array
# @param TotalCount: 事件总数量
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :EventSet, :TotalCount, :RequestId
def initialize(eventset=nil, totalcount=nil, requestid=nil)
@EventSet = eventset
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['EventSet'].nil?
@EventSet = []
params['EventSet'].each do |i|
escapeeventinfo_tmp = EscapeEventInfo.new
escapeeventinfo_tmp.deserialize(i)
@EventSet << escapeeventinfo_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeEscapeEventsExport请求参数结构体
class DescribeEscapeEventsExportRequest < TencentCloud::Common::AbstractModel
# @param ExportField: 导出字段
# @type ExportField: Array
# @param Limit: 需要返回的数量，默认为10，最大值为100
# @type Limit: Integer
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
# @param Filters: 过滤参数,"Filters":[{"Name":"Status","Values":["2"]}]
# @type Filters: Array
# @param Order: 升序降序,asc desc
# @type Order: String
# @param By: 排序字段
# @type By: String
attr_accessor :ExportField, :Limit, :Offset, :Filters, :Order, :By
def initialize(exportfield=nil, limit=nil, offset=nil, filters=nil, order=nil, by=nil)
@ExportField = exportfield
@Limit = limit
@Offset = offset
@Filters = filters
@Order = order
@By = by
end
def deserialize(params)
@ExportField = params['ExportField']
@Limit = params['Limit']
@Offset = params['Offset']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
runtimefilters_tmp = RunTimeFilters.new
runtimefilters_tmp.deserialize(i)
@Filters << runtimefilters_tmp
end
end
@Order = params['Order']
@By = params['By']
end
end
# DescribeEscapeEventsExport返回参数结构体
class DescribeEscapeEventsExportResponse < TencentCloud::Common::AbstractModel
# @param DownloadUrl: execle下载地址
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DownloadUrl: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :DownloadUrl, :RequestId
def initialize(downloadurl=nil, requestid=nil)
@DownloadUrl = downloadurl
@RequestId = requestid
end
def deserialize(params)
@DownloadUrl = params['DownloadUrl']
@RequestId = params['RequestId']
end
end
# DescribeEscapeRuleInfo请求参数结构体
class DescribeEscapeRuleInfoRequest < TencentCloud::Common::AbstractModel
def initialize()
end
def deserialize(params)
end
end
# DescribeEscapeRuleInfo返回参数结构体
class DescribeEscapeRuleInfoResponse < TencentCloud::Common::AbstractModel
# @param RuleSet: 规则信息
# @type RuleSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RuleSet, :RequestId
def initialize(ruleset=nil, requestid=nil)
@RuleSet = ruleset
@RequestId = requestid
end
def deserialize(params)
unless params['RuleSet'].nil?
@RuleSet = []
params['RuleSet'].each do |i|
escaperule_tmp = EscapeRule.new
escaperule_tmp.deserialize(i)
@RuleSet << escaperule_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeEscapeSafeState请求参数结构体
class DescribeEscapeSafeStateRequest < TencentCloud::Common::AbstractModel
def initialize()
end
def deserialize(params)
end
end
# DescribeEscapeSafeState返回参数结构体
class DescribeEscapeSafeStateResponse < TencentCloud::Common::AbstractModel
# @param IsSafe: Unsafe：存在风险，Safe：暂无风险,UnKnown:未知风险
# @type IsSafe: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :IsSafe, :RequestId
def initialize(issafe=nil, requestid=nil)
@IsSafe = issafe
@RequestId = requestid
end
def deserialize(params)
@IsSafe = params['IsSafe']
@RequestId = params['RequestId']
end
end
# DescribeExportJobResult请求参数结构体
class DescribeExportJobResultRequest < TencentCloud::Common::AbstractModel
# @param JobId: CreateExportComplianceStatusListJob返回的JobId字段的值
# @type JobId: String
attr_accessor :JobId
def initialize(jobid=nil)
@JobId = jobid
end
def deserialize(params)
@JobId = params['JobId']
end
end
# DescribeExportJobResult返回参数结构体
class DescribeExportJobResultResponse < TencentCloud::Common::AbstractModel
# @param ExportStatus: 导出的状态。取值为, SUCCESS:成功、FAILURE:失败，RUNNING: 进行中。
# @type ExportStatus: String
# @param DownloadURL: 返回下载URL
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DownloadURL: String
# @param ExportProgress: 当ExportStatus为RUNNING时，返回导出进度。0~100范围的浮点数。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ExportProgress: Float
# @param FailureMsg: 失败原因
# 注意：此字段可能返回 null，表示取不到有效值。
# @type FailureMsg: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :ExportStatus, :DownloadURL, :ExportProgress, :FailureMsg, :RequestId
def initialize(exportstatus=nil, downloadurl=nil, exportprogress=nil, failuremsg=nil, requestid=nil)
@ExportStatus = exportstatus
@DownloadURL = downloadurl
@ExportProgress = exportprogress
@FailureMsg = failuremsg
@RequestId = requestid
end
def deserialize(params)
@ExportStatus = params['ExportStatus']
@DownloadURL = params['DownloadURL']
@ExportProgress = params['ExportProgress']
@FailureMsg = params['FailureMsg']
@RequestId = params['RequestId']
end
end
# DescribeImageAuthorizedInfo请求参数结构体
class DescribeImageAuthorizedInfoRequest < TencentCloud::Common::AbstractModel
def initialize()
end
def deserialize(params)
end
end
# DescribeImageAuthorizedInfo返回参数结构体
class DescribeImageAuthorizedInfoResponse < TencentCloud::Common::AbstractModel
# @param TotalAuthorizedCnt: 总共有效的镜像授权数
# @type TotalAuthorizedCnt: Integer
# @param UsedAuthorizedCnt: 已使用镜像授权数
# @type UsedAuthorizedCnt: Integer
# @param ScannedImageCnt: 已开启扫描镜像数
# @type ScannedImageCnt: Integer
# @param NotScannedImageCnt: 未开启扫描镜像数
# @type NotScannedImageCnt: Integer
# @param NotScannedLocalImageCnt: 本地未开启扫描镜像数
# @type NotScannedLocalImageCnt: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalAuthorizedCnt, :UsedAuthorizedCnt, :ScannedImageCnt, :NotScannedImageCnt, :NotScannedLocalImageCnt, :RequestId
def initialize(totalauthorizedcnt=nil, usedauthorizedcnt=nil, scannedimagecnt=nil, notscannedimagecnt=nil, notscannedlocalimagecnt=nil, requestid=nil)
@TotalAuthorizedCnt = totalauthorizedcnt
@UsedAuthorizedCnt = usedauthorizedcnt
@ScannedImageCnt = scannedimagecnt
@NotScannedImageCnt = notscannedimagecnt
@NotScannedLocalImageCnt = notscannedlocalimagecnt
@RequestId = requestid
end
def deserialize(params)
@TotalAuthorizedCnt = params['TotalAuthorizedCnt']
@UsedAuthorizedCnt = params['UsedAuthorizedCnt']
@ScannedImageCnt = params['ScannedImageCnt']
@NotScannedImageCnt = params['NotScannedImageCnt']
@NotScannedLocalImageCnt = params['NotScannedLocalImageCnt']
@RequestId = params['RequestId']
end
end
# DescribeImageRegistryTimingScanTask请求参数结构体
class DescribeImageRegistryTimingScanTaskRequest < TencentCloud::Common::AbstractModel
def initialize()
end
def deserialize(params)
end
end
# DescribeImageRegistryTimingScanTask返回参数结构体
class DescribeImageRegistryTimingScanTaskResponse < TencentCloud::Common::AbstractModel
# @param Enable: 定时扫描开关
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Enable: Boolean
# @param ScanTime: 定时任务扫描时间
# @type ScanTime: String
# @param ScanPeriod: 定时扫描间隔
# @type ScanPeriod: Integer
# @param ScanType: 扫描类型数组
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ScanType: Array
# @param All: 扫描全部镜像
# @type All: Boolean
# @param Images: 自定义扫描镜像
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Images: Array
# @param Id: 自动以扫描镜像Id
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Id: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Enable, :ScanTime, :ScanPeriod, :ScanType, :All, :Images, :Id, :RequestId
def initialize(enable=nil, scantime=nil, scanperiod=nil, scantype=nil, all=nil, images=nil, id=nil, requestid=nil)
@Enable = enable
@ScanTime = scantime
@ScanPeriod = scanperiod
@ScanType = scantype
@All = all
@Images = images
@Id = id
@RequestId = requestid
end
def deserialize(params)
@Enable = params['Enable']
@ScanTime = params['ScanTime']
@ScanPeriod = params['ScanPeriod']
@ScanType = params['ScanType']
@All = params['All']
unless params['Images'].nil?
@Images = []
params['Images'].each do |i|
imageinfo_tmp = ImageInfo.new
imageinfo_tmp.deserialize(i)
@Images << imageinfo_tmp
end
end
@Id = params['Id']
@RequestId = params['RequestId']
end
end
# DescribeImageRiskSummary请求参数结构体
class DescribeImageRiskSummaryRequest < TencentCloud::Common::AbstractModel
def initialize()
end
def deserialize(params)
end
end
# DescribeImageRiskSummary返回参数结构体
class DescribeImageRiskSummaryResponse < TencentCloud::Common::AbstractModel
# @param VulnerabilityCnt: 安全漏洞
# @type VulnerabilityCnt: Array
# @param MalwareVirusCnt: 木马病毒
# @type MalwareVirusCnt: Array
# @param RiskCnt: 敏感信息
# @type RiskCnt: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :VulnerabilityCnt, :MalwareVirusCnt, :RiskCnt, :RequestId
def initialize(vulnerabilitycnt=nil, malwareviruscnt=nil, riskcnt=nil, requestid=nil)
@VulnerabilityCnt = vulnerabilitycnt
@MalwareVirusCnt = malwareviruscnt
@RiskCnt = riskcnt
@RequestId = requestid
end
def deserialize(params)
unless params['VulnerabilityCnt'].nil?
@VulnerabilityCnt = []
params['VulnerabilityCnt'].each do |i|
runtimeriskinfo_tmp = RunTimeRiskInfo.new
runtimeriskinfo_tmp.deserialize(i)
@VulnerabilityCnt << runtimeriskinfo_tmp
end
end
unless params['MalwareVirusCnt'].nil?
@MalwareVirusCnt = []
params['MalwareVirusCnt'].each do |i|
runtimeriskinfo_tmp = RunTimeRiskInfo.new
runtimeriskinfo_tmp.deserialize(i)
@MalwareVirusCnt << runtimeriskinfo_tmp
end
end
unless params['RiskCnt'].nil?
@RiskCnt = []
params['RiskCnt'].each do |i|
runtimeriskinfo_tmp = RunTimeRiskInfo.new
runtimeriskinfo_tmp.deserialize(i)
@RiskCnt << runtimeriskinfo_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeImageRiskTendency请求参数结构体
class DescribeImageRiskTendencyRequest < TencentCloud::Common::AbstractModel
# @param StartTime: 开始时间
# @type StartTime: String
# @param EndTime: 结束时间
# @type EndTime: String
attr_accessor :StartTime, :EndTime
def initialize(starttime=nil, endtime=nil)
@StartTime = starttime
@EndTime = endtime
end
def deserialize(params)
@StartTime = params['StartTime']
@EndTime = params['EndTime']
end
end
# DescribeImageRiskTendency返回参数结构体
class DescribeImageRiskTendencyResponse < TencentCloud::Common::AbstractModel
# @param ImageRiskTendencySet: 本地镜像新增风险趋势信息列表
# @type ImageRiskTendencySet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :ImageRiskTendencySet, :RequestId
def initialize(imagerisktendencyset=nil, requestid=nil)
@ImageRiskTendencySet = imagerisktendencyset
@RequestId = requestid
end
def deserialize(params)
unless params['ImageRiskTendencySet'].nil?
@ImageRiskTendencySet = []
params['ImageRiskTendencySet'].each do |i|
imagerisktendencyinfo_tmp = ImageRiskTendencyInfo.new
imagerisktendencyinfo_tmp.deserialize(i)
@ImageRiskTendencySet << imagerisktendencyinfo_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeImageSimpleList请求参数结构体
class DescribeImageSimpleListRequest < TencentCloud::Common::AbstractModel
# @param Filters: IsAuthorized 是否已经授权, 0:否 1:是 无:全部
# @type Filters: Array
# @param Limit: 需要返回的数量，默认为10，最大值为100
# @type Limit: Integer
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
# @param Order: 排序方式
# @type Order: String
# @param By: 排序字段
# @type By: String
attr_accessor :Filters, :Limit, :Offset, :Order, :By
def initialize(filters=nil, limit=nil, offset=nil, order=nil, by=nil)
@Filters = filters
@Limit = limit
@Offset = offset
@Order = order
@By = by
end
def deserialize(params)
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
runtimefilters_tmp = RunTimeFilters.new
runtimefilters_tmp.deserialize(i)
@Filters << runtimefilters_tmp
end
end
@Limit = params['Limit']
@Offset = params['Offset']
@Order = params['Order']
@By = params['By']
end
end
# DescribeImageSimpleList返回参数结构体
class DescribeImageSimpleListResponse < TencentCloud::Common::AbstractModel
# @param ImageList: 镜像列表
# @type ImageList: Array
# @param ImageCnt: 镜像数
# @type ImageCnt: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :ImageList, :ImageCnt, :RequestId
def initialize(imagelist=nil, imagecnt=nil, requestid=nil)
@ImageList = imagelist
@ImageCnt = imagecnt
@RequestId = requestid
end
def deserialize(params)
unless params['ImageList'].nil?
@ImageList = []
params['ImageList'].each do |i|
imagesimpleinfo_tmp = ImageSimpleInfo.new
imagesimpleinfo_tmp.deserialize(i)
@ImageList << imagesimpleinfo_tmp
end
end
@ImageCnt = params['ImageCnt']
@RequestId = params['RequestId']
end
end
# DescribePostPayDetail请求参数结构体
class DescribePostPayDetailRequest < TencentCloud::Common::AbstractModel
# @param Limit: 需要返回的数量，默认为10，最大值为100
# @type Limit: Integer
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
attr_accessor :Limit, :Offset
def initialize(limit=nil, offset=nil)
@Limit = limit
@Offset = offset
end
def deserialize(params)
@Limit = params['Limit']
@Offset = params['Offset']
end
end
# DescribePostPayDetail返回参数结构体
class DescribePostPayDetailResponse < TencentCloud::Common::AbstractModel
# @param SoftQuotaDayDetail: 弹性计费扣费详情
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SoftQuotaDayDetail: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :SoftQuotaDayDetail, :RequestId
def initialize(softquotadaydetail=nil, requestid=nil)
@SoftQuotaDayDetail = softquotadaydetail
@RequestId = requestid
end
def deserialize(params)
unless params['SoftQuotaDayDetail'].nil?
@SoftQuotaDayDetail = []
params['SoftQuotaDayDetail'].each do |i|
softquotadayinfo_tmp = SoftQuotaDayInfo.new
softquotadayinfo_tmp.deserialize(i)
@SoftQuotaDayDetail << softquotadayinfo_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeProVersionInfo请求参数结构体
class DescribeProVersionInfoRequest < TencentCloud::Common::AbstractModel
def initialize()
end
def deserialize(params)
end
end
# DescribeProVersionInfo返回参数结构体
class DescribeProVersionInfoResponse < TencentCloud::Common::AbstractModel
# @param StartTime: 专业版开始时间，补充购买时才不为空
# 注意：此字段可能返回 null，表示取不到有效值。
# @type StartTime: String
# @param EndTime: 专业版结束时间，补充购买时才不为空
# 注意：此字段可能返回 null，表示取不到有效值。
# @type EndTime: String
# @param CoresCnt: 需购买的机器核数
# @type CoresCnt: Integer
# @param MaxPostPayCoresCnt: 弹性计费上限
# @type MaxPostPayCoresCnt: Integer
# @param ResourceId: 资源ID
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ResourceId: String
# @param BuyStatus: 购买状态
# 待购: Pending
# 已购: Normal
# 隔离: Isolate
# @type BuyStatus: String
# @param IsPurchased: 是否曾经购买过(false:未曾 true:曾经购买过)
# @type IsPurchased: Boolean
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :StartTime, :EndTime, :CoresCnt, :MaxPostPayCoresCnt, :ResourceId, :BuyStatus, :IsPurchased, :RequestId
def initialize(starttime=nil, endtime=nil, corescnt=nil, maxpostpaycorescnt=nil, resourceid=nil, buystatus=nil, ispurchased=nil, requestid=nil)
@StartTime = starttime
@EndTime = endtime
@CoresCnt = corescnt
@MaxPostPayCoresCnt = maxpostpaycorescnt
@ResourceId = resourceid
@BuyStatus = buystatus
@IsPurchased = ispurchased
@RequestId = requestid
end
def deserialize(params)
@StartTime = params['StartTime']
@EndTime = params['EndTime']
@CoresCnt = params['CoresCnt']
@MaxPostPayCoresCnt = params['MaxPostPayCoresCnt']
@ResourceId = params['ResourceId']
@BuyStatus = params['BuyStatus']
@IsPurchased = params['IsPurchased']
@RequestId = params['RequestId']
end
end
# DescribePurchaseStateInfo请求参数结构体
class DescribePurchaseStateInfoRequest < TencentCloud::Common::AbstractModel
def initialize()
end
def deserialize(params)
end
end
# DescribePurchaseStateInfo返回参数结构体
class DescribePurchaseStateInfoResponse < TencentCloud::Common::AbstractModel
# @param State: 0：可申请试用可购买；1：只可购买(含试用审核不通过和试用过期)；2：试用生效中；3：专业版生效中；4：专业版过期
# @type State: Integer
# @param CoresCnt: 总核数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CoresCnt: Integer
# @param AuthorizedCoresCnt: 已购买核数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AuthorizedCoresCnt: Integer
# @param ImageCnt: 镜像数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ImageCnt: Integer
# @param AuthorizedImageCnt: 已授权镜像数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AuthorizedImageCnt: Integer
# @param PurchasedAuthorizedCnt: 已购买镜像授权数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PurchasedAuthorizedCnt: Integer
# @param ExpirationTime: 过期时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ExpirationTime: String
# @param AutomaticRenewal: 0表示默认状态(用户未设置，即初始状态)， 1表示自动续费，2表示明确不自动续费(用户设置)
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AutomaticRenewal: Integer
# @param GivenAuthorizedCnt: 试用期间赠送镜像授权数，可能会过期
# 注意：此字段可能返回 null，表示取不到有效值。
# @type GivenAuthorizedCnt: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :State, :CoresCnt, :AuthorizedCoresCnt, :ImageCnt, :AuthorizedImageCnt, :PurchasedAuthorizedCnt, :ExpirationTime, :AutomaticRenewal, :GivenAuthorizedCnt, :RequestId
def initialize(state=nil, corescnt=nil, authorizedcorescnt=nil, imagecnt=nil, authorizedimagecnt=nil, purchasedauthorizedcnt=nil, expirationtime=nil, automaticrenewal=nil, givenauthorizedcnt=nil, requestid=nil)
@State = state
@CoresCnt = corescnt
@AuthorizedCoresCnt = authorizedcorescnt
@ImageCnt = imagecnt
@AuthorizedImageCnt = authorizedimagecnt
@PurchasedAuthorizedCnt = purchasedauthorizedcnt
@ExpirationTime = expirationtime
@AutomaticRenewal = automaticrenewal
@GivenAuthorizedCnt = givenauthorizedcnt
@RequestId = requestid
end
def deserialize(params)
@State = params['State']
@CoresCnt = params['CoresCnt']
@AuthorizedCoresCnt = params['AuthorizedCoresCnt']
@ImageCnt = params['ImageCnt']
@AuthorizedImageCnt = params['AuthorizedImageCnt']
@PurchasedAuthorizedCnt = params['PurchasedAuthorizedCnt']
@ExpirationTime = params['ExpirationTime']
@AutomaticRenewal = params['AutomaticRenewal']
@GivenAuthorizedCnt = params['GivenAuthorizedCnt']
@RequestId = params['RequestId']
end
end
# DescribeRefreshTask请求参数结构体
class DescribeRefreshTaskRequest < TencentCloud::Common::AbstractModel
# @param TaskId: 任务ID
# @type TaskId: Integer
attr_accessor :TaskId
def initialize(taskid=nil)
@TaskId = taskid
end
def deserialize(params)
@TaskId = params['TaskId']
end
end
# DescribeRefreshTask返回参数结构体
class DescribeRefreshTaskResponse < TencentCloud::Common::AbstractModel
# @param TaskStatus: 刷新任务状态，可能为：Task_New,Task_Running,Task_Finish,Task_Error,Task_NoExist
# @type TaskStatus: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TaskStatus, :RequestId
def initialize(taskstatus=nil, requestid=nil)
@TaskStatus = taskstatus
@RequestId = requestid
end
def deserialize(params)
@TaskStatus = params['TaskStatus']
@RequestId = params['RequestId']
end
end
# DescribeReverseShellDetail请求参数结构体
class DescribeReverseShellDetailRequest < TencentCloud::Common::AbstractModel
# @param EventId: 事件唯一id
# @type EventId: String
attr_accessor :EventId
def initialize(eventid=nil)
@EventId = eventid
end
def deserialize(params)
@EventId = params['EventId']
end
end
# DescribeReverseShellDetail返回参数结构体
class DescribeReverseShellDetailResponse < TencentCloud::Common::AbstractModel
# @param EventBaseInfo: 事件基本信息
# @type EventBaseInfo: :class:`Tencentcloud::Tcss.v20201101.models.RunTimeEventBaseInfo`
# @param ProcessInfo: 进程信息
# @type ProcessInfo: :class:`Tencentcloud::Tcss.v20201101.models.ProcessDetailInfo`
# @param ParentProcessInfo: 父进程信息
# @type ParentProcessInfo: :class:`Tencentcloud::Tcss.v20201101.models.ProcessDetailBaseInfo`
# @param EventDetail: 事件描述
# @type EventDetail: :class:`Tencentcloud::Tcss.v20201101.models.ReverseShellEventDescription`
# @param AncestorProcessInfo: 祖先进程信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AncestorProcessInfo: :class:`Tencentcloud::Tcss.v20201101.models.ProcessBaseInfo`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :EventBaseInfo, :ProcessInfo, :ParentProcessInfo, :EventDetail, :AncestorProcessInfo, :RequestId
def initialize(eventbaseinfo=nil, processinfo=nil, parentprocessinfo=nil, eventdetail=nil, ancestorprocessinfo=nil, requestid=nil)
@EventBaseInfo = eventbaseinfo
@ProcessInfo = processinfo
@ParentProcessInfo = parentprocessinfo
@EventDetail = eventdetail
@AncestorProcessInfo = ancestorprocessinfo
@RequestId = requestid
end
def deserialize(params)
unless params['EventBaseInfo'].nil?
@EventBaseInfo = RunTimeEventBaseInfo.new
@EventBaseInfo.deserialize(params['EventBaseInfo'])
end
unless params['ProcessInfo'].nil?
@ProcessInfo = ProcessDetailInfo.new
@ProcessInfo.deserialize(params['ProcessInfo'])
end
unless params['ParentProcessInfo'].nil?
@ParentProcessInfo = ProcessDetailBaseInfo.new
@ParentProcessInfo.deserialize(params['ParentProcessInfo'])
end
unless params['EventDetail'].nil?
@EventDetail = ReverseShellEventDescription.new
@EventDetail.deserialize(params['EventDetail'])
end
unless params['AncestorProcessInfo'].nil?
@AncestorProcessInfo = ProcessBaseInfo.new
@AncestorProcessInfo.deserialize(params['AncestorProcessInfo'])
end
@RequestId = params['RequestId']
end
end
# DescribeReverseShellEventsExport请求参数结构体
class DescribeReverseShellEventsExportRequest < TencentCloud::Common::AbstractModel
# @param ExportField: 导出字段
# @type ExportField: Array
# @param Limit: 需要返回的数量，默认为10，最大值为100
# @type Limit: Integer
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
# @param Filters: 过滤参数,"Filters":[{"Name":"Status","Values":["2"]}]
# @type Filters: Array
# @param Order: 升序降序,asc desc
# @type Order: String
# @param By: 排序字段
# @type By: String
attr_accessor :ExportField, :Limit, :Offset, :Filters, :Order, :By
def initialize(exportfield=nil, limit=nil, offset=nil, filters=nil, order=nil, by=nil)
@ExportField = exportfield
@Limit = limit
@Offset = offset
@Filters = filters
@Order = order
@By = by
end
def deserialize(params)
@ExportField = params['ExportField']
@Limit = params['Limit']
@Offset = params['Offset']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
runtimefilters_tmp = RunTimeFilters.new
runtimefilters_tmp.deserialize(i)
@Filters << runtimefilters_tmp
end
end
@Order = params['Order']
@By = params['By']
end
end
# DescribeReverseShellEventsExport返回参数结构体
class DescribeReverseShellEventsExportResponse < TencentCloud::Common::AbstractModel
# @param DownloadUrl: execle下载地址
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DownloadUrl: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :DownloadUrl, :RequestId
def initialize(downloadurl=nil, requestid=nil)
@DownloadUrl = downloadurl
@RequestId = requestid
end
def deserialize(params)
@DownloadUrl = params['DownloadUrl']
@RequestId = params['RequestId']
end
end
# DescribeReverseShellEvents请求参数结构体
class DescribeReverseShellEventsRequest < TencentCloud::Common::AbstractModel
# @param Limit: 需要返回的数量，默认为10，最大值为100
# @type Limit: Integer
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
# @param Filters: 过滤参数,"Filters":[{"Name":"Status","Values":["2"]}]
# @type Filters: Array
# @param Order: 升序降序,asc desc
# @type Order: String
# @param By: 排序字段
# @type By: String
attr_accessor :Limit, :Offset, :Filters, :Order, :By
def initialize(limit=nil, offset=nil, filters=nil, order=nil, by=nil)
@Limit = limit
@Offset = offset
@Filters = filters
@Order = order
@By = by
end
def deserialize(params)
@Limit = params['Limit']
@Offset = params['Offset']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
runtimefilters_tmp = RunTimeFilters.new
runtimefilters_tmp.deserialize(i)
@Filters << runtimefilters_tmp
end
end
@Order = params['Order']
@By = params['By']
end
end
# DescribeReverseShellEvents返回参数结构体
class DescribeReverseShellEventsResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 事件总数量
# @type TotalCount: Integer
# @param EventSet: 反弹shell数组
# @type EventSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :EventSet, :RequestId
def initialize(totalcount=nil, eventset=nil, requestid=nil)
@TotalCount = totalcount
@EventSet = eventset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['EventSet'].nil?
@EventSet = []
params['EventSet'].each do |i|
reverseshelleventinfo_tmp = ReverseShellEventInfo.new
reverseshelleventinfo_tmp.deserialize(i)
@EventSet << reverseshelleventinfo_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeReverseShellWhiteListDetail请求参数结构体
class DescribeReverseShellWhiteListDetailRequest < TencentCloud::Common::AbstractModel
# @param WhiteListId: 白名单id
# @type WhiteListId: String
attr_accessor :WhiteListId
def initialize(whitelistid=nil)
@WhiteListId = whitelistid
end
def deserialize(params)
@WhiteListId = params['WhiteListId']
end
end
# DescribeReverseShellWhiteListDetail返回参数结构体
class DescribeReverseShellWhiteListDetailResponse < TencentCloud::Common::AbstractModel
# @param WhiteListDetailInfo: 事件基本信息
# @type WhiteListDetailInfo: :class:`Tencentcloud::Tcss.v20201101.models.ReverseShellWhiteListInfo`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :WhiteListDetailInfo, :RequestId
def initialize(whitelistdetailinfo=nil, requestid=nil)
@WhiteListDetailInfo = whitelistdetailinfo
@RequestId = requestid
end
def deserialize(params)
unless params['WhiteListDetailInfo'].nil?
@WhiteListDetailInfo = ReverseShellWhiteListInfo.new
@WhiteListDetailInfo.deserialize(params['WhiteListDetailInfo'])
end
@RequestId = params['RequestId']
end
end
# DescribeReverseShellWhiteLists请求参数结构体
class DescribeReverseShellWhiteListsRequest < TencentCloud::Common::AbstractModel
# @param Limit: 需要返回的数量，默认为10，最大值为100
# @type Limit: Integer
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
# @param Filters: 过滤参数,"Filters":[{"Name":"Status","Values":["2"]}]
# @type Filters: Array
# @param Order: 升序降序,asc desc
# @type Order: String
# @param By: 排序字段
# @type By: String
attr_accessor :Limit, :Offset, :Filters, :Order, :By
def initialize(limit=nil, offset=nil, filters=nil, order=nil, by=nil)
@Limit = limit
@Offset = offset
@Filters = filters
@Order = order
@By = by
end
def deserialize(params)
@Limit = params['Limit']
@Offset = params['Offset']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
runtimefilters_tmp = RunTimeFilters.new
runtimefilters_tmp.deserialize(i)
@Filters << runtimefilters_tmp
end
end
@Order = params['Order']
@By = params['By']
end
end
# DescribeReverseShellWhiteLists返回参数结构体
class DescribeReverseShellWhiteListsResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 事件总数量
# @type TotalCount: Integer
# @param WhiteListSet: 白名单信息列表
# @type WhiteListSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :WhiteListSet, :RequestId
def initialize(totalcount=nil, whitelistset=nil, requestid=nil)
@TotalCount = totalcount
@WhiteListSet = whitelistset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['WhiteListSet'].nil?
@WhiteListSet = []
params['WhiteListSet'].each do |i|
reverseshellwhitelistbaseinfo_tmp = ReverseShellWhiteListBaseInfo.new
reverseshellwhitelistbaseinfo_tmp.deserialize(i)
@WhiteListSet << reverseshellwhitelistbaseinfo_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeRiskList请求参数结构体
class DescribeRiskListRequest < TencentCloud::Common::AbstractModel
# @param ClusterId: 要查询的集群ID，如果不指定，则查询用户所有的风险项
# @type ClusterId: String
# @param Offset: 偏移量
# @type Offset: Integer
# @param Limit: 每次查询的最大记录数量
# @type Limit: Integer
# @param Filters: Name - String
# Name 可取值：RiskLevel风险等级, RiskTarget检查对象，风险对象,RiskType风险类别,RiskAttribute检测项所属的风险类型,Name
# @type Filters: Array
# @param By: 排序字段
# @type By: String
# @param Order: 排序方式 asc,desc
# @type Order: String
attr_accessor :ClusterId, :Offset, :Limit, :Filters, :By, :Order
def initialize(clusterid=nil, offset=nil, limit=nil, filters=nil, by=nil, order=nil)
@ClusterId = clusterid
@Offset = offset
@Limit = limit
@Filters = filters
@By = by
@Order = order
end
def deserialize(params)
@ClusterId = params['ClusterId']
@Offset = params['Offset']
@Limit = params['Limit']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
compliancefilters_tmp = ComplianceFilters.new
compliancefilters_tmp.deserialize(i)
@Filters << compliancefilters_tmp
end
end
@By = params['By']
@Order = params['Order']
end
end
# DescribeRiskList返回参数结构体
class DescribeRiskListResponse < TencentCloud::Common::AbstractModel
# @param ClusterRiskItems: 风险详情数组
# @type ClusterRiskItems: Array
# @param TotalCount: 风险项的总数
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :ClusterRiskItems, :TotalCount, :RequestId
def initialize(clusterriskitems=nil, totalcount=nil, requestid=nil)
@ClusterRiskItems = clusterriskitems
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['ClusterRiskItems'].nil?
@ClusterRiskItems = []
params['ClusterRiskItems'].each do |i|
clusterriskitem_tmp = ClusterRiskItem.new
clusterriskitem_tmp.deserialize(i)
@ClusterRiskItems << clusterriskitem_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeRiskSyscallDetail请求参数结构体
class DescribeRiskSyscallDetailRequest < TencentCloud::Common::AbstractModel
# @param EventId: 事件唯一id
# @type EventId: String
attr_accessor :EventId
def initialize(eventid=nil)
@EventId = eventid
end
def deserialize(params)
@EventId = params['EventId']
end
end
# DescribeRiskSyscallDetail返回参数结构体
class DescribeRiskSyscallDetailResponse < TencentCloud::Common::AbstractModel
# @param EventBaseInfo: 事件基本信息
# @type EventBaseInfo: :class:`Tencentcloud::Tcss.v20201101.models.RunTimeEventBaseInfo`
# @param ProcessInfo: 进程信息
# @type ProcessInfo: :class:`Tencentcloud::Tcss.v20201101.models.ProcessDetailInfo`
# @param ParentProcessInfo: 父进程信息
# @type ParentProcessInfo: :class:`Tencentcloud::Tcss.v20201101.models.ProcessDetailBaseInfo`
# @param EventDetail: 事件描述
# @type EventDetail: :class:`Tencentcloud::Tcss.v20201101.models.RiskSyscallEventDescription`
# @param AncestorProcessInfo: 祖先进程信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AncestorProcessInfo: :class:`Tencentcloud::Tcss.v20201101.models.ProcessBaseInfo`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :EventBaseInfo, :ProcessInfo, :ParentProcessInfo, :EventDetail, :AncestorProcessInfo, :RequestId
def initialize(eventbaseinfo=nil, processinfo=nil, parentprocessinfo=nil, eventdetail=nil, ancestorprocessinfo=nil, requestid=nil)
@EventBaseInfo = eventbaseinfo
@ProcessInfo = processinfo
@ParentProcessInfo = parentprocessinfo
@EventDetail = eventdetail
@AncestorProcessInfo = ancestorprocessinfo
@RequestId = requestid
end
def deserialize(params)
unless params['EventBaseInfo'].nil?
@EventBaseInfo = RunTimeEventBaseInfo.new
@EventBaseInfo.deserialize(params['EventBaseInfo'])
end
unless params['ProcessInfo'].nil?
@ProcessInfo = ProcessDetailInfo.new
@ProcessInfo.deserialize(params['ProcessInfo'])
end
unless params['ParentProcessInfo'].nil?
@ParentProcessInfo = ProcessDetailBaseInfo.new
@ParentProcessInfo.deserialize(params['ParentProcessInfo'])
end
unless params['EventDetail'].nil?
@EventDetail = RiskSyscallEventDescription.new
@EventDetail.deserialize(params['EventDetail'])
end
unless params['AncestorProcessInfo'].nil?
@AncestorProcessInfo = ProcessBaseInfo.new
@AncestorProcessInfo.deserialize(params['AncestorProcessInfo'])
end
@RequestId = params['RequestId']
end
end
# DescribeRiskSyscallEventsExport请求参数结构体
class DescribeRiskSyscallEventsExportRequest < TencentCloud::Common::AbstractModel
# @param ExportField: 导出字段
# @type ExportField: Array
# @param Limit: 需要返回的数量，默认为10，最大值为100
# @type Limit: Integer
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
# @param Filters: 过滤参数,"Filters":[{"Name":"Status","Values":["2"]}]
# @type Filters: Array
# @param Order: 升序降序,asc desc
# @type Order: String
# @param By: 排序字段
# @type By: String
attr_accessor :ExportField, :Limit, :Offset, :Filters, :Order, :By
def initialize(exportfield=nil, limit=nil, offset=nil, filters=nil, order=nil, by=nil)
@ExportField = exportfield
@Limit = limit
@Offset = offset
@Filters = filters
@Order = order
@By = by
end
def deserialize(params)
@ExportField = params['ExportField']
@Limit = params['Limit']
@Offset = params['Offset']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
runtimefilters_tmp = RunTimeFilters.new
runtimefilters_tmp.deserialize(i)
@Filters << runtimefilters_tmp
end
end
@Order = params['Order']
@By = params['By']
end
end
# DescribeRiskSyscallEventsExport返回参数结构体
class DescribeRiskSyscallEventsExportResponse < TencentCloud::Common::AbstractModel
# @param DownloadUrl: Excel下载地址
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DownloadUrl: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :DownloadUrl, :RequestId
def initialize(downloadurl=nil, requestid=nil)
@DownloadUrl = downloadurl
@RequestId = requestid
end
def deserialize(params)
@DownloadUrl = params['DownloadUrl']
@RequestId = params['RequestId']
end
end
# DescribeRiskSyscallEvents请求参数结构体
class DescribeRiskSyscallEventsRequest < TencentCloud::Common::AbstractModel
# @param Limit: 需要返回的数量，默认为10，最大值为100
# @type Limit: Integer
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
# @param Filters: 过滤参数,"Filters":[{"Name":"Status","Values":["2"]}]
# @type Filters: Array
# @param Order: 升序降序,asc desc
# @type Order: String
# @param By: 排序字段
# @type By: String
attr_accessor :Limit, :Offset, :Filters, :Order, :By
def initialize(limit=nil, offset=nil, filters=nil, order=nil, by=nil)
@Limit = limit
@Offset = offset
@Filters = filters
@Order = order
@By = by
end
def deserialize(params)
@Limit = params['Limit']
@Offset = params['Offset']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
runtimefilters_tmp = RunTimeFilters.new
runtimefilters_tmp.deserialize(i)
@Filters << runtimefilters_tmp
end
end
@Order = params['Order']
@By = params['By']
end
end
# DescribeRiskSyscallEvents返回参数结构体
class DescribeRiskSyscallEventsResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 事件总数量
# @type TotalCount: Integer
# @param EventSet: 高危系统调用数组
# @type EventSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :EventSet, :RequestId
def initialize(totalcount=nil, eventset=nil, requestid=nil)
@TotalCount = totalcount
@EventSet = eventset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['EventSet'].nil?
@EventSet = []
params['EventSet'].each do |i|
risksyscalleventinfo_tmp = RiskSyscallEventInfo.new
risksyscalleventinfo_tmp.deserialize(i)
@EventSet << risksyscalleventinfo_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeRiskSyscallNames请求参数结构体
class DescribeRiskSyscallNamesRequest < TencentCloud::Common::AbstractModel
def initialize()
end
def deserialize(params)
end
end
# DescribeRiskSyscallNames返回参数结构体
class DescribeRiskSyscallNamesResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 事件总数量
# @type TotalCount: Integer
# @param SyscallNames: 系统调用名称列表
# @type SyscallNames: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :SyscallNames, :RequestId
def initialize(totalcount=nil, syscallnames=nil, requestid=nil)
@TotalCount = totalcount
@SyscallNames = syscallnames
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
@SyscallNames = params['SyscallNames']
@RequestId = params['RequestId']
end
end
# DescribeRiskSyscallWhiteListDetail请求参数结构体
class DescribeRiskSyscallWhiteListDetailRequest < TencentCloud::Common::AbstractModel
# @param WhiteListId: 白名单id
# @type WhiteListId: String
attr_accessor :WhiteListId
def initialize(whitelistid=nil)
@WhiteListId = whitelistid
end
def deserialize(params)
@WhiteListId = params['WhiteListId']
end
end
# DescribeRiskSyscallWhiteListDetail返回参数结构体
class DescribeRiskSyscallWhiteListDetailResponse < TencentCloud::Common::AbstractModel
# @param WhiteListDetailInfo: 白名单基本信息
# @type WhiteListDetailInfo: :class:`Tencentcloud::Tcss.v20201101.models.RiskSyscallWhiteListInfo`
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :WhiteListDetailInfo, :RequestId
def initialize(whitelistdetailinfo=nil, requestid=nil)
@WhiteListDetailInfo = whitelistdetailinfo
@RequestId = requestid
end
def deserialize(params)
unless params['WhiteListDetailInfo'].nil?
@WhiteListDetailInfo = RiskSyscallWhiteListInfo.new
@WhiteListDetailInfo.deserialize(params['WhiteListDetailInfo'])
end
@RequestId = params['RequestId']
end
end
# DescribeRiskSyscallWhiteLists请求参数结构体
class DescribeRiskSyscallWhiteListsRequest < TencentCloud::Common::AbstractModel
# @param Limit: 需要返回的数量，默认为10，最大值为100
# @type Limit: Integer
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
# @param Filters: 过滤参数,"Filters":[{"Name":"Status","Values":["2"]}]
# @type Filters: Array
# @param Order: 升序降序,asc desc
# @type Order: String
# @param By: 排序字段
# @type By: String
attr_accessor :Limit, :Offset, :Filters, :Order, :By
def initialize(limit=nil, offset=nil, filters=nil, order=nil, by=nil)
@Limit = limit
@Offset = offset
@Filters = filters
@Order = order
@By = by
end
def deserialize(params)
@Limit = params['Limit']
@Offset = params['Offset']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
runtimefilters_tmp = RunTimeFilters.new
runtimefilters_tmp.deserialize(i)
@Filters << runtimefilters_tmp
end
end
@Order = params['Order']
@By = params['By']
end
end
# DescribeRiskSyscallWhiteLists返回参数结构体
class DescribeRiskSyscallWhiteListsResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 事件总数量
# @type TotalCount: Integer
# @param WhiteListSet: 白名单信息列表
# @type WhiteListSet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :WhiteListSet, :RequestId
def initialize(totalcount=nil, whitelistset=nil, requestid=nil)
@TotalCount = totalcount
@WhiteListSet = whitelistset
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['WhiteListSet'].nil?
@WhiteListSet = []
params['WhiteListSet'].each do |i|
risksyscallwhitelistbaseinfo_tmp = RiskSyscallWhiteListBaseInfo.new
risksyscallwhitelistbaseinfo_tmp.deserialize(i)
@WhiteListSet << risksyscallwhitelistbaseinfo_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeSecEventsTendency请求参数结构体
class DescribeSecEventsTendencyRequest < TencentCloud::Common::AbstractModel
# @param StartTime: 开始时间
# @type StartTime: String
# @param EndTime: 结束时间
# @type EndTime: String
attr_accessor :StartTime, :EndTime
def initialize(starttime=nil, endtime=nil)
@StartTime = starttime
@EndTime = endtime
end
def deserialize(params)
@StartTime = params['StartTime']
@EndTime = params['EndTime']
end
end
# DescribeSecEventsTendency返回参数结构体
class DescribeSecEventsTendencyResponse < TencentCloud::Common::AbstractModel
# @param EventTendencySet: 运行时安全事件趋势信息列表
# @type EventTendencySet: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :EventTendencySet, :RequestId
def initialize(eventtendencyset=nil, requestid=nil)
@EventTendencySet = eventtendencyset
@RequestId = requestid
end
def deserialize(params)
unless params['EventTendencySet'].nil?
@EventTendencySet = []
params['EventTendencySet'].each do |i|
sectendencyeventinfo_tmp = SecTendencyEventInfo.new
sectendencyeventinfo_tmp.deserialize(i)
@EventTendencySet << sectendencyeventinfo_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeTaskResultSummary请求参数结构体
class DescribeTaskResultSummaryRequest < TencentCloud::Common::AbstractModel
def initialize()
end
def deserialize(params)
end
end
# DescribeTaskResultSummary返回参数结构体
class DescribeTaskResultSummaryResponse < TencentCloud::Common::AbstractModel
# @param SeriousRiskNodeCount: 严重风险影响的节点数量,返回7天数据
# @type SeriousRiskNodeCount: Array
# @param HighRiskNodeCount: 高风险影响的节点的数量,返回7天数据
# @type HighRiskNodeCount: Array
# @param MiddleRiskNodeCount: 中风险检查项的节点数量,返回7天数据
# @type MiddleRiskNodeCount: Array
# @param HintRiskNodeCount: 提示风险检查项的节点数量,返回7天数据
# @type HintRiskNodeCount: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :SeriousRiskNodeCount, :HighRiskNodeCount, :MiddleRiskNodeCount, :HintRiskNodeCount, :RequestId
def initialize(seriousrisknodecount=nil, highrisknodecount=nil, middlerisknodecount=nil, hintrisknodecount=nil, requestid=nil)
@SeriousRiskNodeCount = seriousrisknodecount
@HighRiskNodeCount = highrisknodecount
@MiddleRiskNodeCount = middlerisknodecount
@HintRiskNodeCount = hintrisknodecount
@RequestId = requestid
end
def deserialize(params)
@SeriousRiskNodeCount = params['SeriousRiskNodeCount']
@HighRiskNodeCount = params['HighRiskNodeCount']
@MiddleRiskNodeCount = params['MiddleRiskNodeCount']
@HintRiskNodeCount = params['HintRiskNodeCount']
@RequestId = params['RequestId']
end
end
# DescribeUnfinishRefreshTask请求参数结构体
class DescribeUnfinishRefreshTaskRequest < TencentCloud::Common::AbstractModel
def initialize()
end
def deserialize(params)
end
end
# DescribeUnfinishRefreshTask返回参数结构体
class DescribeUnfinishRefreshTaskResponse < TencentCloud::Common::AbstractModel
# @param TaskId: 返回最近的一次任务ID
# @type TaskId: Integer
# @param TaskStatus: 任务状态，为Task_New,Task_Running,Task_Finish,Task_Error,Task_NoExist.Task_New,Task_Running表示有任务存在，不允许新下发
# @type TaskStatus: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TaskId, :TaskStatus, :RequestId
def initialize(taskid=nil, taskstatus=nil, requestid=nil)
@TaskId = taskid
@TaskStatus = taskstatus
@RequestId = requestid
end
def deserialize(params)
@TaskId = params['TaskId']
@TaskStatus = params['TaskStatus']
@RequestId = params['RequestId']
end
end
# DescribeUserCluster请求参数结构体
class DescribeUserClusterRequest < TencentCloud::Common::AbstractModel
# @param Offset: 偏移量
# @type Offset: Integer
# @param Limit: 每次查询的最大记录数量
# @type Limit: Integer
# @param Filters: Name - String
# Name 可取值：ClusterName,ClusterId,ClusterType,Region,ClusterCheckMode,ClusterAutoCheck
# @type Filters: Array
# @param By: 排序字段
# @type By: String
# @param Order: 排序方式 asc,desc
# @type Order: String
attr_accessor :Offset, :Limit, :Filters, :By, :Order
def initialize(offset=nil, limit=nil, filters=nil, by=nil, order=nil)
@Offset = offset
@Limit = limit
@Filters = filters
@By = by
@Order = order
end
def deserialize(params)
@Offset = params['Offset']
@Limit = params['Limit']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
compliancefilters_tmp = ComplianceFilters.new
compliancefilters_tmp.deserialize(i)
@Filters << compliancefilters_tmp
end
end
@By = params['By']
@Order = params['Order']
end
end
# DescribeUserCluster返回参数结构体
class DescribeUserClusterResponse < TencentCloud::Common::AbstractModel
# @param TotalCount: 集群总数
# @type TotalCount: Integer
# @param ClusterInfoList: 集群的详细信息
# @type ClusterInfoList: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TotalCount, :ClusterInfoList, :RequestId
def initialize(totalcount=nil, clusterinfolist=nil, requestid=nil)
@TotalCount = totalcount
@ClusterInfoList = clusterinfolist
@RequestId = requestid
end
def deserialize(params)
@TotalCount = params['TotalCount']
unless params['ClusterInfoList'].nil?
@ClusterInfoList = []
params['ClusterInfoList'].each do |i|
clusterinfoitem_tmp = ClusterInfoItem.new
clusterinfoitem_tmp.deserialize(i)
@ClusterInfoList << clusterinfoitem_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeValueAddedSrvInfo请求参数结构体
class DescribeValueAddedSrvInfoRequest < TencentCloud::Common::AbstractModel
def initialize()
end
def deserialize(params)
end
end
# DescribeValueAddedSrvInfo返回参数结构体
class DescribeValueAddedSrvInfoResponse < TencentCloud::Common::AbstractModel
# @param RegistryImageCnt: 仓库镜像未授权数量
# @type RegistryImageCnt: Integer
# @param LocalImageCnt: 本地镜像未授权数量
# @type LocalImageCnt: Integer
# @param UnusedAuthorizedCnt: 未使用的镜像安全扫描授权数
# @type UnusedAuthorizedCnt: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RegistryImageCnt, :LocalImageCnt, :UnusedAuthorizedCnt, :RequestId
def initialize(registryimagecnt=nil, localimagecnt=nil, unusedauthorizedcnt=nil, requestid=nil)
@RegistryImageCnt = registryimagecnt
@LocalImageCnt = localimagecnt
@UnusedAuthorizedCnt = unusedauthorizedcnt
@RequestId = requestid
end
def deserialize(params)
@RegistryImageCnt = params['RegistryImageCnt']
@LocalImageCnt = params['LocalImageCnt']
@UnusedAuthorizedCnt = params['UnusedAuthorizedCnt']
@RequestId = params['RequestId']
end
end
# DescribeVirusDetail请求参数结构体
class DescribeVirusDetailRequest < TencentCloud::Common::AbstractModel
# @param Id: 木马文件id
# @type Id: String
attr_accessor :Id
def initialize(id=nil)
@Id = id
end
def deserialize(params)
@Id = params['Id']
end
end
# DescribeVirusDetail返回参数结构体
class DescribeVirusDetailResponse < TencentCloud::Common::AbstractModel
# @param ImageId: 镜像ID
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ImageId: String
# @param ImageName: 镜像名称
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ImageName: String
# @param CreateTime: 创建时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CreateTime: String
# @param Size: 木马文件大小
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Size: Integer
# @param FilePath: 木马文件路径
# 注意：此字段可能返回 null，表示取不到有效值。
# @type FilePath: String
# @param ModifyTime: 最近生成时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ModifyTime: String
# @param VirusName: 病毒名称
# 注意：此字段可能返回 null，表示取不到有效值。
# @type VirusName: String
# @param RiskLevel: 风险等级 RISK_CRITICAL, RISK_HIGH, RISK_MEDIUM, RISK_LOW, RISK_NOTICE。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RiskLevel: String
# @param ContainerName: 容器名称
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ContainerName: String
# @param ContainerId: 容器id
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ContainerId: String
# @param HostName: 主机名称
# 注意：此字段可能返回 null，表示取不到有效值。
# @type HostName: String
# @param HostId: 主机id
# 注意：此字段可能返回 null，表示取不到有效值。
# @type HostId: String
# @param ProcessName: 进程名称
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ProcessName: String
# @param ProcessPath: 进程路径
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ProcessPath: String
# @param ProcessMd5: 进程md5
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ProcessMd5: String
# @param ProcessId: 进程id
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ProcessId: Integer
# @param ProcessArgv: 进程参数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ProcessArgv: String
# @param ProcessChan: 进程链
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ProcessChan: String
# @param ProcessAccountGroup: 进程组
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ProcessAccountGroup: String
# @param ProcessStartAccount: 进程启动用户
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ProcessStartAccount: String
# @param ProcessFileAuthority: 进程文件权限
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ProcessFileAuthority: String
# @param SourceType: 来源：0：一键扫描， 1：定时扫描 2：实时监控
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SourceType: Integer
# @param PodName: 集群名称
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PodName: String
# @param Tags: 标签
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Tags: Array
# @param HarmDescribe: 事件描述
# 注意：此字段可能返回 null，表示取不到有效值。
# @type HarmDescribe: String
# @param SuggestScheme: 建议方案
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SuggestScheme: String
# @param Mark: 备注
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Mark: String
# @param FileName: 风险文件名称
# 注意：此字段可能返回 null，表示取不到有效值。
# @type FileName: String
# @param FileMd5: 文件MD5
# 注意：此字段可能返回 null，表示取不到有效值。
# @type FileMd5: String
# @param EventType: 事件类型
# 注意：此字段可能返回 null，表示取不到有效值。
# @type EventType: String
# @param Status: DEAL_NONE:文件待处理
# DEAL_IGNORE:已经忽略
# DEAL_ADD_WHITELIST:加白
# DEAL_DEL:文件已经删除
# DEAL_ISOLATE:已经隔离
# DEAL_ISOLATING:隔离中
# DEAL_ISOLATE_FAILED:隔离失败
# DEAL_RECOVERING:恢复中
# DEAL_RECOVER_FAILED: 恢复失败
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Status: String
# @param SubStatus: 失败子状态:
# FILE_NOT_FOUND:文件不存在
# FILE_ABNORMAL:文件异常
# FILE_ABNORMAL_DEAL_RECOVER:恢复文件时，文件异常
# BACKUP_FILE_NOT_FOUND:备份文件不存在
# CONTAINER_NOT_FOUND_DEAL_ISOLATE:隔离时，容器不存在
# CONTAINER_NOT_FOUND_DEAL_RECOVER:恢复时，容器不存在
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SubStatus: String
# @param HostIP: 内网ip
# 注意：此字段可能返回 null，表示取不到有效值。
# @type HostIP: String
# @param ClientIP: 外网ip
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ClientIP: String
# @param PProcessStartUser: 父进程启动用户
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PProcessStartUser: String
# @param PProcessUserGroup: 父进程用户组
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PProcessUserGroup: String
# @param PProcessPath: 父进程路径
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PProcessPath: String
# @param PProcessParam: 父进程命令行参数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PProcessParam: String
# @param AncestorProcessStartUser: 祖先进程启动用户
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AncestorProcessStartUser: String
# @param AncestorProcessUserGroup: 祖先进程用户组
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AncestorProcessUserGroup: String
# @param AncestorProcessPath: 祖先进程路径
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AncestorProcessPath: String
# @param AncestorProcessParam: 祖先进程命令行参数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type AncestorProcessParam: String
# @param OperationTime: 事件最后一次处理的时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type OperationTime: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :ImageId, :ImageName, :CreateTime, :Size, :FilePath, :ModifyTime, :VirusName, :RiskLevel, :ContainerName, :ContainerId, :HostName, :HostId, :ProcessName, :ProcessPath, :ProcessMd5, :ProcessId, :ProcessArgv, :ProcessChan, :ProcessAccountGroup, :ProcessStartAccount, :ProcessFileAuthority, :SourceType, :PodName, :Tags, :HarmDescribe, :SuggestScheme, :Mark, :FileName, :FileMd5, :EventType, :Status, :SubStatus, :HostIP, :ClientIP, :PProcessStartUser, :PProcessUserGroup, :PProcessPath, :PProcessParam, :AncestorProcessStartUser, :AncestorProcessUserGroup, :AncestorProcessPath, :AncestorProcessParam, :OperationTime, :RequestId
def initialize(imageid=nil, imagename=nil, createtime=nil, size=nil, filepath=nil, modifytime=nil, virusname=nil, risklevel=nil, containername=nil, containerid=nil, hostname=nil, hostid=nil, processname=nil, processpath=nil, processmd5=nil, processid=nil, processargv=nil, processchan=nil, processaccountgroup=nil, processstartaccount=nil, processfileauthority=nil, sourcetype=nil, podname=nil, tags=nil, harmdescribe=nil, suggestscheme=nil, mark=nil, filename=nil, filemd5=nil, eventtype=nil, status=nil, substatus=nil, hostip=nil, clientip=nil, pprocessstartuser=nil, pprocessusergroup=nil, pprocesspath=nil, pprocessparam=nil, ancestorprocessstartuser=nil, ancestorprocessusergroup=nil, ancestorprocesspath=nil, ancestorprocessparam=nil, operationtime=nil, requestid=nil)
@ImageId = imageid
@ImageName = imagename
@CreateTime = createtime
@Size = size
@FilePath = filepath
@ModifyTime = modifytime
@VirusName = virusname
@RiskLevel = risklevel
@ContainerName = containername
@ContainerId = containerid
@HostName = hostname
@HostId = hostid
@ProcessName = processname
@ProcessPath = processpath
@ProcessMd5 = processmd5
@ProcessId = processid
@ProcessArgv = processargv
@ProcessChan = processchan
@ProcessAccountGroup = processaccountgroup
@ProcessStartAccount = processstartaccount
@ProcessFileAuthority = processfileauthority
@SourceType = sourcetype
@PodName = podname
@Tags = tags
@HarmDescribe = harmdescribe
@SuggestScheme = suggestscheme
@Mark = mark
@FileName = filename
@FileMd5 = filemd5
@EventType = eventtype
@Status = status
@SubStatus = substatus
@HostIP = hostip
@ClientIP = clientip
@PProcessStartUser = pprocessstartuser
@PProcessUserGroup = pprocessusergroup
@PProcessPath = pprocesspath
@PProcessParam = pprocessparam
@AncestorProcessStartUser = ancestorprocessstartuser
@AncestorProcessUserGroup = ancestorprocessusergroup
@AncestorProcessPath = ancestorprocesspath
@AncestorProcessParam = ancestorprocessparam
@OperationTime = operationtime
@RequestId = requestid
end
def deserialize(params)
@ImageId = params['ImageId']
@ImageName = params['ImageName']
@CreateTime = params['CreateTime']
@Size = params['Size']
@FilePath = params['FilePath']
@ModifyTime = params['ModifyTime']
@VirusName = params['VirusName']
@RiskLevel = params['RiskLevel']
@ContainerName = params['ContainerName']
@ContainerId = params['ContainerId']
@HostName = params['HostName']
@HostId = params['HostId']
@ProcessName = params['ProcessName']
@ProcessPath = params['ProcessPath']
@ProcessMd5 = params['ProcessMd5']
@ProcessId = params['ProcessId']
@ProcessArgv = params['ProcessArgv']
@ProcessChan = params['ProcessChan']
@ProcessAccountGroup = params['ProcessAccountGroup']
@ProcessStartAccount = params['ProcessStartAccount']
@ProcessFileAuthority = params['ProcessFileAuthority']
@SourceType = params['SourceType']
@PodName = params['PodName']
@Tags = params['Tags']
@HarmDescribe = params['HarmDescribe']
@SuggestScheme = params['SuggestScheme']
@Mark = params['Mark']
@FileName = params['FileName']
@FileMd5 = params['FileMd5']
@EventType = params['EventType']
@Status = params['Status']
@SubStatus = params['SubStatus']
@HostIP = params['HostIP']
@ClientIP = params['ClientIP']
@PProcessStartUser = params['PProcessStartUser']
@PProcessUserGroup = params['PProcessUserGroup']
@PProcessPath = params['PProcessPath']
@PProcessParam = params['PProcessParam']
@AncestorProcessStartUser = params['AncestorProcessStartUser']
@AncestorProcessUserGroup = params['AncestorProcessUserGroup']
@AncestorProcessPath = params['AncestorProcessPath']
@AncestorProcessParam = params['AncestorProcessParam']
@OperationTime = params['OperationTime']
@RequestId = params['RequestId']
end
end
# DescribeVirusList请求参数结构体
class DescribeVirusListRequest < TencentCloud::Common::AbstractModel
# @param Limit: 需要返回的数量，默认为10，最大值为100
# @type Limit: Integer
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
# @param Filters: 过滤条件。
# <li>FileName - String - 是否必填：否 - 文件名称</li>
# <li>FilePath - String - 是否必填：否 - 文件路径</li>
# <li>VirusName - String - 是否必填：否 - 病毒名称</li>
# <li>ContainerName- String - 是否必填：是 - 容器名称</li>
# <li>ContainerId- string - 是否必填：否 - 容器id</li>
# <li>ImageName- string - 是否必填：否 - 镜像名称</li>
# <li>ImageId- string - 是否必填：否 - 镜像id</li>
# <li>IsRealTime- int - 是否必填：否 - 过滤是否实时监控数据</li>
# <li>TaskId- string - 是否必填：否 - 任务ID</li>
# @type Filters: Array
# @param Order: 排序方式
# @type Order: String
# @param By: 排序字段
# @type By: String
attr_accessor :Limit, :Offset, :Filters, :Order, :By
def initialize(limit=nil, offset=nil, filters=nil, order=nil, by=nil)
@Limit = limit
@Offset = offset
@Filters = filters
@Order = order
@By = by
end
def deserialize(params)
@Limit = params['Limit']
@Offset = params['Offset']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
runtimefilters_tmp = RunTimeFilters.new
runtimefilters_tmp.deserialize(i)
@Filters << runtimefilters_tmp
end
end
@Order = params['Order']
@By = params['By']
end
end
# DescribeVirusList返回参数结构体
class DescribeVirusListResponse < TencentCloud::Common::AbstractModel
# @param List: 木马列表
# @type List: Array
# @param TotalCount: 总数量
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :List, :TotalCount, :RequestId
def initialize(list=nil, totalcount=nil, requestid=nil)
@List = list
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['List'].nil?
@List = []
params['List'].each do |i|
virusinfo_tmp = VirusInfo.new
virusinfo_tmp.deserialize(i)
@List << virusinfo_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeVirusMonitorSetting请求参数结构体
class DescribeVirusMonitorSettingRequest < TencentCloud::Common::AbstractModel
def initialize()
end
def deserialize(params)
end
end
# DescribeVirusMonitorSetting返回参数结构体
class DescribeVirusMonitorSettingResponse < TencentCloud::Common::AbstractModel
# @param EnableScan: 是否开启实时监控
# @type EnableScan: Boolean
# @param ScanPathAll: 扫描全部路径
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ScanPathAll: Boolean
# @param ScanPathType: 当ScanPathAll为true 生效 0扫描以下路径 1、扫描除以下路径
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ScanPathType: Integer
# @param ScanPath: 自选排除或扫描的地址
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ScanPath: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :EnableScan, :ScanPathAll, :ScanPathType, :ScanPath, :RequestId
def initialize(enablescan=nil, scanpathall=nil, scanpathtype=nil, scanpath=nil, requestid=nil)
@EnableScan = enablescan
@ScanPathAll = scanpathall
@ScanPathType = scanpathtype
@ScanPath = scanpath
@RequestId = requestid
end
def deserialize(params)
@EnableScan = params['EnableScan']
@ScanPathAll = params['ScanPathAll']
@ScanPathType = params['ScanPathType']
@ScanPath = params['ScanPath']
@RequestId = params['RequestId']
end
end
# DescribeVirusScanSetting请求参数结构体
class DescribeVirusScanSettingRequest < TencentCloud::Common::AbstractModel
def initialize()
end
def deserialize(params)
end
end
# DescribeVirusScanSetting返回参数结构体
class DescribeVirusScanSettingResponse < TencentCloud::Common::AbstractModel
# @param EnableScan: 是否开启定期扫描
# @type EnableScan: Boolean
# @param Cycle: 检测周期每隔多少天
# @type Cycle: Integer
# @param BeginScanAt: 扫描开始时间
# @type BeginScanAt: String
# @param ScanPathAll: 扫描全部路径
# @type ScanPathAll: Boolean
# @param ScanPathType: 当ScanPathAll为true 生效 0扫描以下路径 1、扫描除以下路径
# @type ScanPathType: Integer
# @param Timeout: 超时时长，单位小时
# @type Timeout: Integer
# @param ScanRangeType: 扫描范围0容器1主机节点
# @type ScanRangeType: Integer
# @param ScanRangeAll: true 全选，false 自选
# @type ScanRangeAll: Boolean
# @param ScanIds: 自选扫描范围的容器id或者主机id 根据ScanRangeType决定
# @type ScanIds: Array
# @param ScanPath: 自选排除或扫描的地址
# @type ScanPath: Array
# @param ClickTimeout: 一键检测的超时设置
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ClickTimeout: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :EnableScan, :Cycle, :BeginScanAt, :ScanPathAll, :ScanPathType, :Timeout, :ScanRangeType, :ScanRangeAll, :ScanIds, :ScanPath, :ClickTimeout, :RequestId
def initialize(enablescan=nil, cycle=nil, beginscanat=nil, scanpathall=nil, scanpathtype=nil, timeout=nil, scanrangetype=nil, scanrangeall=nil, scanids=nil, scanpath=nil, clicktimeout=nil, requestid=nil)
@EnableScan = enablescan
@Cycle = cycle
@BeginScanAt = beginscanat
@ScanPathAll = scanpathall
@ScanPathType = scanpathtype
@Timeout = timeout
@ScanRangeType = scanrangetype
@ScanRangeAll = scanrangeall
@ScanIds = scanids
@ScanPath = scanpath
@ClickTimeout = clicktimeout
@RequestId = requestid
end
def deserialize(params)
@EnableScan = params['EnableScan']
@Cycle = params['Cycle']
@BeginScanAt = params['BeginScanAt']
@ScanPathAll = params['ScanPathAll']
@ScanPathType = params['ScanPathType']
@Timeout = params['Timeout']
@ScanRangeType = params['ScanRangeType']
@ScanRangeAll = params['ScanRangeAll']
@ScanIds = params['ScanIds']
@ScanPath = params['ScanPath']
@ClickTimeout = params['ClickTimeout']
@RequestId = params['RequestId']
end
end
# DescribeVirusScanTaskStatus请求参数结构体
class DescribeVirusScanTaskStatusRequest < TencentCloud::Common::AbstractModel
# @param TaskID: 任务id
# @type TaskID: String
attr_accessor :TaskID
def initialize(taskid=nil)
@TaskID = taskid
end
def deserialize(params)
@TaskID = params['TaskID']
end
end
# DescribeVirusScanTaskStatus返回参数结构体
class DescribeVirusScanTaskStatusResponse < TencentCloud::Common::AbstractModel
# @param ContainerTotal: 查杀容器个数
# @type ContainerTotal: Integer
# @param RiskContainerCnt: 风险容器个数
# @type RiskContainerCnt: Integer
# @param Status: 扫描状态 任务状态:
# SCAN_NONE:无，
# SCAN_SCANNING:正在扫描中，
# SCAN_FINISH：扫描完成，
# SCAN_TIMEOUT：扫描超时
# SCAN_CANCELING: 取消中
# SCAN_CANCELED:已取消
# @type Status: String
# @param Schedule: 扫描进度 I
# @type Schedule: Integer
# @param ContainerScanCnt: 已经扫描了的容器个数
# @type ContainerScanCnt: Integer
# @param RiskCnt: 风险个数
# @type RiskCnt: Integer
# @param LeftSeconds: 剩余扫描时间
# @type LeftSeconds: Integer
# @param StartTime: 扫描开始时间
# @type StartTime: String
# @param EndTime: 扫描结束时间
# @type EndTime: String
# @param ScanType: 扫描类型，"CYCLE"：周期扫描， "MANUAL"：手动扫描
# @type ScanType: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :ContainerTotal, :RiskContainerCnt, :Status, :Schedule, :ContainerScanCnt, :RiskCnt, :LeftSeconds, :StartTime, :EndTime, :ScanType, :RequestId
def initialize(containertotal=nil, riskcontainercnt=nil, status=nil, schedule=nil, containerscancnt=nil, riskcnt=nil, leftseconds=nil, starttime=nil, endtime=nil, scantype=nil, requestid=nil)
@ContainerTotal = containertotal
@RiskContainerCnt = riskcontainercnt
@Status = status
@Schedule = schedule
@ContainerScanCnt = containerscancnt
@RiskCnt = riskcnt
@LeftSeconds = leftseconds
@StartTime = starttime
@EndTime = endtime
@ScanType = scantype
@RequestId = requestid
end
def deserialize(params)
@ContainerTotal = params['ContainerTotal']
@RiskContainerCnt = params['RiskContainerCnt']
@Status = params['Status']
@Schedule = params['Schedule']
@ContainerScanCnt = params['ContainerScanCnt']
@RiskCnt = params['RiskCnt']
@LeftSeconds = params['LeftSeconds']
@StartTime = params['StartTime']
@EndTime = params['EndTime']
@ScanType = params['ScanType']
@RequestId = params['RequestId']
end
end
# DescribeVirusScanTimeoutSetting请求参数结构体
class DescribeVirusScanTimeoutSettingRequest < TencentCloud::Common::AbstractModel
# @param ScanType: 设置类型0一键检测，1定时检测
# @type ScanType: Integer
attr_accessor :ScanType
def initialize(scantype=nil)
@ScanType = scantype
end
def deserialize(params)
@ScanType = params['ScanType']
end
end
# DescribeVirusScanTimeoutSetting返回参数结构体
class DescribeVirusScanTimeoutSettingResponse < TencentCloud::Common::AbstractModel
# @param Timeout: 超时时长单位小时
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Timeout: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Timeout, :RequestId
def initialize(timeout=nil, requestid=nil)
@Timeout = timeout
@RequestId = requestid
end
def deserialize(params)
@Timeout = params['Timeout']
@RequestId = params['RequestId']
end
end
# DescribeVirusSummary请求参数结构体
class DescribeVirusSummaryRequest < TencentCloud::Common::AbstractModel
def initialize()
end
def deserialize(params)
end
end
# DescribeVirusSummary返回参数结构体
class DescribeVirusSummaryResponse < TencentCloud::Common::AbstractModel
# @param TaskId: 最近的一次扫描任务id
# @type TaskId: String
# @param RiskContainerCnt: 木马影响容器个数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RiskContainerCnt: Integer
# @param RiskCnt: 待处理风险个数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RiskCnt: Integer
# @param VirusDataBaseModifyTime: 病毒库更新时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type VirusDataBaseModifyTime: String
# @param RiskContainerIncrease: 木马影响容器个数较昨日增长
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RiskContainerIncrease: Integer
# @param RiskIncrease: 待处理风险个数较昨日增长
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RiskIncrease: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TaskId, :RiskContainerCnt, :RiskCnt, :VirusDataBaseModifyTime, :RiskContainerIncrease, :RiskIncrease, :RequestId
def initialize(taskid=nil, riskcontainercnt=nil, riskcnt=nil, virusdatabasemodifytime=nil, riskcontainerincrease=nil, riskincrease=nil, requestid=nil)
@TaskId = taskid
@RiskContainerCnt = riskcontainercnt
@RiskCnt = riskcnt
@VirusDataBaseModifyTime = virusdatabasemodifytime
@RiskContainerIncrease = riskcontainerincrease
@RiskIncrease = riskincrease
@RequestId = requestid
end
def deserialize(params)
@TaskId = params['TaskId']
@RiskContainerCnt = params['RiskContainerCnt']
@RiskCnt = params['RiskCnt']
@VirusDataBaseModifyTime = params['VirusDataBaseModifyTime']
@RiskContainerIncrease = params['RiskContainerIncrease']
@RiskIncrease = params['RiskIncrease']
@RequestId = params['RequestId']
end
end
# DescribeVirusTaskList请求参数结构体
class DescribeVirusTaskListRequest < TencentCloud::Common::AbstractModel
# @param TaskId: 任务id
# @type TaskId: String
# @param Limit: 需要返回的数量，默认为10，最大值为100
# @type Limit: Integer
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
# @param Filters: 过滤条件。
# <li>ContainerName - String - 是否必填：否 - 容器名称</li>
# <li>ContainerId - String - 是否必填：否 - 容器id</li>
# <li>Hostname - String - 是否必填：否 - 主机名称</li>
# <li>HostIp- String - 是否必填：是 - 容器名称</li>
# @type Filters: Array
# @param By: 排序字段
# @type By: String
# @param Order: 排序方式
# @type Order: String
attr_accessor :TaskId, :Limit, :Offset, :Filters, :By, :Order
def initialize(taskid=nil, limit=nil, offset=nil, filters=nil, by=nil, order=nil)
@TaskId = taskid
@Limit = limit
@Offset = offset
@Filters = filters
@By = by
@Order = order
end
def deserialize(params)
@TaskId = params['TaskId']
@Limit = params['Limit']
@Offset = params['Offset']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
runtimefilters_tmp = RunTimeFilters.new
runtimefilters_tmp.deserialize(i)
@Filters << runtimefilters_tmp
end
end
@By = params['By']
@Order = params['Order']
end
end
# DescribeVirusTaskList返回参数结构体
class DescribeVirusTaskListResponse < TencentCloud::Common::AbstractModel
# @param List: 文件查杀列表
# @type List: Array
# @param TotalCount: 总数量(容器任务数量)
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :List, :TotalCount, :RequestId
def initialize(list=nil, totalcount=nil, requestid=nil)
@List = list
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['List'].nil?
@List = []
params['List'].each do |i|
virustaskinfo_tmp = VirusTaskInfo.new
virustaskinfo_tmp.deserialize(i)
@List << virustaskinfo_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeWarningRules请求参数结构体
class DescribeWarningRulesRequest < TencentCloud::Common::AbstractModel
def initialize()
end
def deserialize(params)
end
end
# DescribeWarningRules返回参数结构体
class DescribeWarningRulesResponse < TencentCloud::Common::AbstractModel
# @param WarningRules: 告警策略列表
# @type WarningRules: Array
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :WarningRules, :RequestId
def initialize(warningrules=nil, requestid=nil)
@WarningRules = warningrules
@RequestId = requestid
end
def deserialize(params)
unless params['WarningRules'].nil?
@WarningRules = []
params['WarningRules'].each do |i|
warningrule_tmp = WarningRule.new
warningrule_tmp.deserialize(i)
@WarningRules << warningrule_tmp
end
end
@RequestId = params['RequestId']
end
end
# 运行时容器逃逸事件描述信息
class EscapeEventDescription < TencentCloud::Common::AbstractModel
# @param Description: 事件规则
# @type Description: String
# @param Solution: 解决方案
# @type Solution: String
# @param Remark: 事件备注信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Remark: String
# @param OperationTime: 事件最后一次处理的时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type OperationTime: String
attr_accessor :Description, :Solution, :Remark, :OperationTime
def initialize(description=nil, solution=nil, remark=nil, operationtime=nil)
@Description = description
@Solution = solution
@Remark = remark
@OperationTime = operationtime
end
def deserialize(params)
@Description = params['Description']
@Solution = params['Solution']
@Remark = params['Remark']
@OperationTime = params['OperationTime']
end
end
# 容器逃逸事件列表
class EscapeEventInfo < TencentCloud::Common::AbstractModel
# @param EventType: 事件类型
# ESCAPE_HOST_ACESS_FILE:宿主机文件访问逃逸
# ESCAPE_MOUNT_NAMESPACE:MountNamespace逃逸
# ESCAPE_PRIVILEDGE:程序提权逃逸
# ESCAPE_PRIVILEDGE_CONTAINER_START:特权容器启动逃逸
# ESCAPE_MOUNT_SENSITIVE_PTAH:敏感路径挂载
# ESCAPE_SYSCALL:Syscall逃逸
# @type EventType: String
# @param ContainerName: 容器名
# @type ContainerName: String
# @param ImageName: 镜像名
# @type ImageName: String
# @param Status: 状态，EVENT_UNDEAL:未处理，EVENT_DEALED:已处理，EVENT_INGNORE:忽略
# @type Status: String
# @param EventId: 事件记录的唯一id
# @type EventId: String
# @param NodeName: 节点名称
# @type NodeName: String
# @param PodName: pod(实例)的名字
# @type PodName: String
# @param FoundTime: 生成时间
# @type FoundTime: String
# @param EventName: 事件名字，
# 宿主机文件访问逃逸、
# Syscall逃逸、
# MountNamespace逃逸、
# 程序提权逃逸、
# 特权容器启动逃逸、
# 敏感路径挂载
# @type EventName: String
# @param ImageId: 镜像id，用于跳转
# @type ImageId: String
# @param ContainerId: 容器id，用于跳转
# @type ContainerId: String
# @param Solution: 事件解决方案
# @type Solution: String
# @param Description: 事件描述
# @type Description: String
# @param EventCount: 事件数量
# @type EventCount: Integer
# @param LatestFoundTime: 最近生成时间
# @type LatestFoundTime: String
# @param NodeIP: 节点IP
# 注意：此字段可能返回 null，表示取不到有效值。
# @type NodeIP: String
# @param HostID: 主机IP
# 注意：此字段可能返回 null，表示取不到有效值。
# @type HostID: String
attr_accessor :EventType, :ContainerName, :ImageName, :Status, :EventId, :NodeName, :PodName, :FoundTime, :EventName, :ImageId, :ContainerId, :Solution, :Description, :EventCount, :LatestFoundTime, :NodeIP, :HostID
def initialize(eventtype=nil, containername=nil, imagename=nil, status=nil, eventid=nil, nodename=nil, podname=nil, foundtime=nil, eventname=nil, imageid=nil, containerid=nil, solution=nil, description=nil, eventcount=nil, latestfoundtime=nil, nodeip=nil, hostid=nil)
@EventType = eventtype
@ContainerName = containername
@ImageName = imagename
@Status = status
@EventId = eventid
@NodeName = nodename
@PodName = podname
@FoundTime = foundtime
@EventName = eventname
@ImageId = imageid
@ContainerId = containerid
@Solution = solution
@Description = description
@EventCount = eventcount
@LatestFoundTime = latestfoundtime
@NodeIP = nodeip
@HostID = hostid
end
def deserialize(params)
@EventType = params['EventType']
@ContainerName = params['ContainerName']
@ImageName = params['ImageName']
@Status = params['Status']
@EventId = params['EventId']
@NodeName = params['NodeName']
@PodName = params['PodName']
@FoundTime = params['FoundTime']
@EventName = params['EventName']
@ImageId = params['ImageId']
@ContainerId = params['ContainerId']
@Solution = params['Solution']
@Description = params['Description']
@EventCount = params['EventCount']
@LatestFoundTime = params['LatestFoundTime']
@NodeIP = params['NodeIP']
@HostID = params['HostID']
end
end
# 容器逃逸扫描策略开关信息
class EscapeRule < TencentCloud::Common::AbstractModel
# @param Type: 规则类型
# ESCAPE_HOST_ACESS_FILE:宿主机文件访问逃逸
# ESCAPE_MOUNT_NAMESPACE:MountNamespace逃逸
# ESCAPE_PRIVILEDGE:程序提权逃逸
# ESCAPE_PRIVILEDGE_CONTAINER_START:特权容器启动逃逸
# ESCAPE_MOUNT_SENSITIVE_PTAH:敏感路径挂载
# ESCAPE_SYSCALL:Syscall逃逸
# @type Type: String
# @param Name: 规则名称
# 宿主机文件访问逃逸、
# Syscall逃逸、
# MountNamespace逃逸、
# 程序提权逃逸、
# 特权容器启动逃逸、
# 敏感路径挂载
# @type Name: String
# @param IsEnable: 是否打开：false否 ，true是
# @type IsEnable: Boolean
# @param Group: 规则组别。RISK_CONTAINER：风险容器，PROCESS_PRIVILEGE：程序特权，CONTAINER_ESCAPE：容器逃逸
# @type Group: String
attr_accessor :Type, :Name, :IsEnable, :Group
def initialize(type=nil, name=nil, isenable=nil, group=nil)
@Type = type
@Name = name
@IsEnable = isenable
@Group = group
end
def deserialize(params)
@Type = params['Type']
@Name = params['Name']
@IsEnable = params['IsEnable']
@Group = params['Group']
end
end
# 修改容器逃逸扫描策略开关信息
class EscapeRuleEnabled < TencentCloud::Common::AbstractModel
# @param Type: 规则类型
# ESCAPE_HOST_ACESS_FILE:宿主机文件访问逃逸
# ESCAPE_MOUNT_NAMESPACE:MountNamespace逃逸
# ESCAPE_PRIVILEDGE:程序提权逃逸
# ESCAPE_PRIVILEDGE_CONTAINER_START:特权容器启动逃逸
# ESCAPE_MOUNT_SENSITIVE_PTAH:敏感路径挂载
# ESCAPE_SYSCALL:Syscall逃逸
# @type Type: String
# @param IsEnable: 是否打开：false否 ，true是
# @type IsEnable: Boolean
attr_accessor :Type, :IsEnable
def initialize(type=nil, isenable=nil)
@Type = type
@IsEnable = isenable
end
def deserialize(params)
@Type = params['Type']
@IsEnable = params['IsEnable']
end
end
# ExportVirusList请求参数结构体
class ExportVirusListRequest < TencentCloud::Common::AbstractModel
# @param Filters: 过滤条件。
# <li>FileName - String - 是否必填：否 - 文件名称</li>
# <li>FilePath - String - 是否必填：否 - 文件路径</li>
# <li>VirusName - String - 是否必填：否 - 病毒名称</li>
# <li>ContainerName- String - 是否必填：是 - 容器名称</li>
# <li>ContainerId- string - 是否必填：否 - 容器id</li>
# <li>ImageName- string - 是否必填：否 - 镜像名称</li>
# <li>ImageId- string - 是否必填：否 - 镜像id</li>
# @type Filters: Array
# @param Order: 排序方式
# @type Order: String
# @param By: 排序字段
# @type By: String
# @param ExportField: 导出字段
# @type ExportField: Array
attr_accessor :Filters, :Order, :By, :ExportField
def initialize(filters=nil, order=nil, by=nil, exportfield=nil)
@Filters = filters
@Order = order
@By = by
@ExportField = exportfield
end
def deserialize(params)
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
runtimefilters_tmp = RunTimeFilters.new
runtimefilters_tmp.deserialize(i)
@Filters << runtimefilters_tmp
end
end
@Order = params['Order']
@By = params['By']
@ExportField = params['ExportField']
end
end
# ExportVirusList返回参数结构体
class ExportVirusListResponse < TencentCloud::Common::AbstractModel
# @param JobId: 导出任务ID，前端拿着任务ID查询任务进度
# @type JobId: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :JobId, :RequestId
def initialize(jobid=nil, requestid=nil)
@JobId = jobid
@RequestId = requestid
end
def deserialize(params)
@JobId = params['JobId']
@RequestId = params['RequestId']
end
end
# 容器安全运行时，文件属性信息
class FileAttributeInfo < TencentCloud::Common::AbstractModel
# @param FileName: 文件名
# @type FileName: String
# @param FileType: 文件类型
# @type FileType: String
# @param FileSize: 文件大小(字节)
# @type FileSize: Integer
# @param FilePath: 文件路径
# @type FilePath: String
# @param FileCreateTime: 文件创建时间
# @type FileCreateTime: String
# @param LatestTamperedFileMTime: 最近被篡改文件创建时间
# @type LatestTamperedFileMTime: String
attr_accessor :FileName, :FileType, :FileSize, :FilePath, :FileCreateTime, :LatestTamperedFileMTime
def initialize(filename=nil, filetype=nil, filesize=nil, filepath=nil, filecreatetime=nil, latesttamperedfilemtime=nil)
@FileName = filename
@FileType = filetype
@FileSize = filesize
@FilePath = filepath
@FileCreateTime = filecreatetime
@LatestTamperedFileMTime = latesttamperedfilemtime
end
def deserialize(params)
@FileName = params['FileName']
@FileType = params['FileType']
@FileSize = params['FileSize']
@FilePath = params['FilePath']
@FileCreateTime = params['FileCreateTime']
@LatestTamperedFileMTime = params['LatestTamperedFileMTime']
end
end
# 容器安全主机列表
class HostInfo < TencentCloud::Common::AbstractModel
# @param HostID: 主机id
# @type HostID: String
# @param HostIP: 主机ip即内网ip
# @type HostIP: String
# @param HostName: 主机名称
# @type HostName: String
# @param Group: 业务组
# @type Group: String
# @param DockerVersion: docker 版本
# @type DockerVersion: String
# @param DockerFileSystemDriver: docker 文件系统类型
# @type DockerFileSystemDriver: String
# @param ImageCnt: 镜像个数
# @type ImageCnt: Integer
# @param ContainerCnt: 容器个数
# @type ContainerCnt: Integer
# @param Status: agent运行状态
# @type Status: String
# @param IsContainerd: 是否是Containerd
# @type IsContainerd: Boolean
# @param MachineType: 主机来源：["CVM", "ECM", "LH", "BM"] 中的之一为腾讯云服务器；["Other"]之一非腾讯云服务器；
# @type MachineType: String
# @param PublicIp: 外网ip
# @type PublicIp: String
# @param Uuid: 主机uuid
# @type Uuid: String
# @param InstanceID: 主机实例ID
# @type InstanceID: String
# @param RegionID: 地域ID
# @type RegionID: Integer
attr_accessor :HostID, :HostIP, :HostName, :Group, :DockerVersion, :DockerFileSystemDriver, :ImageCnt, :ContainerCnt, :Status, :IsContainerd, :MachineType, :PublicIp, :Uuid, :InstanceID, :RegionID
def initialize(hostid=nil, hostip=nil, hostname=nil, group=nil, dockerversion=nil, dockerfilesystemdriver=nil, imagecnt=nil, containercnt=nil, status=nil, iscontainerd=nil, machinetype=nil, publicip=nil, uuid=nil, instanceid=nil, regionid=nil)
@HostID = hostid
@HostIP = hostip
@HostName = hostname
@Group = group
@DockerVersion = dockerversion
@DockerFileSystemDriver = dockerfilesystemdriver
@ImageCnt = imagecnt
@ContainerCnt = containercnt
@Status = status
@IsContainerd = iscontainerd
@MachineType = machinetype
@PublicIp = publicip
@Uuid = uuid
@InstanceID = instanceid
@RegionID = regionid
end
def deserialize(params)
@HostID = params['HostID']
@HostIP = params['HostIP']
@HostName = params['HostName']
@Group = params['Group']
@DockerVersion = params['DockerVersion']
@DockerFileSystemDriver = params['DockerFileSystemDriver']
@ImageCnt = params['ImageCnt']
@ContainerCnt = params['ContainerCnt']
@Status = params['Status']
@IsContainerd = params['IsContainerd']
@MachineType = params['MachineType']
@PublicIp = params['PublicIp']
@Uuid = params['Uuid']
@InstanceID = params['InstanceID']
@RegionID = params['RegionID']
end
end
# 容器安全 主机镜像关联列表
class ImageHost < TencentCloud::Common::AbstractModel
# @param ImageID: 镜像id
# @type ImageID: String
# @param HostID: 主机id
# @type HostID: String
attr_accessor :ImageID, :HostID
def initialize(imageid=nil, hostid=nil)
@ImageID = imageid
@HostID = hostid
end
def deserialize(params)
@ImageID = params['ImageID']
@HostID = params['HostID']
end
end
# 基本镜像信息
class ImageInfo < TencentCloud::Common::AbstractModel
# @param InstanceName: 实例名称
# @type InstanceName: String
# @param Namespace: 命名空间
# @type Namespace: String
# @param ImageName: 镜像名称
# @type ImageName: String
# @param ImageTag: 镜像tag
# @type ImageTag: String
# @param Force: 强制扫描
# @type Force: String
# @param ImageDigest: 镜像id
# @type ImageDigest: String
# @param RegistryType: 仓库类型
# @type RegistryType: String
# @param ImageRepoAddress: 镜像仓库地址
# @type ImageRepoAddress: String
# @param InstanceId: 实例id
# @type InstanceId: String
attr_accessor :InstanceName, :Namespace, :ImageName, :ImageTag, :Force, :ImageDigest, :RegistryType, :ImageRepoAddress, :InstanceId
def initialize(instancename=nil, namespace=nil, imagename=nil, imagetag=nil, force=nil, imagedigest=nil, registrytype=nil, imagerepoaddress=nil, instanceid=nil)
@InstanceName = instancename
@Namespace = namespace
@ImageName = imagename
@ImageTag = imagetag
@Force = force
@ImageDigest = imagedigest
@RegistryType = registrytype
@ImageRepoAddress = imagerepoaddress
@InstanceId = instanceid
end
def deserialize(params)
@InstanceName = params['InstanceName']
@Namespace = params['Namespace']
@ImageName = params['ImageName']
@ImageTag = params['ImageTag']
@Force = params['Force']
@ImageDigest = params['ImageDigest']
@RegistryType = params['RegistryType']
@ImageRepoAddress = params['ImageRepoAddress']
@InstanceId = params['InstanceId']
end
end
# 基本镜像信息
class ImageProgress < TencentCloud::Common::AbstractModel
# @param ImageId: 镜像id
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ImageId: String
# @param RegistryType: 仓库类型
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RegistryType: String
# @param ImageRepoAddress: 镜像仓库地址
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ImageRepoAddress: String
# @param InstanceId: 实例id
# 注意：此字段可能返回 null，表示取不到有效值。
# @type InstanceId: String
# @param InstanceName: 实例名称
# 注意：此字段可能返回 null，表示取不到有效值。
# @type InstanceName: String
# @param Namespace: 命名空间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Namespace: String
# @param ImageName: 仓库名称
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ImageName: String
# @param ImageTag: 镜像tag
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ImageTag: String
# @param ScanStatus: 镜像扫描状态
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ScanStatus: String
# @param CveProgress: 镜像cve扫描进度
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CveProgress: Integer
# @param RiskProgress: 镜像敏感扫描进度
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RiskProgress: Integer
# @param VirusProgress: 镜像木马扫描进度
# 注意：此字段可能返回 null，表示取不到有效值。
# @type VirusProgress: Integer
attr_accessor :ImageId, :RegistryType, :ImageRepoAddress, :InstanceId, :InstanceName, :Namespace, :ImageName, :ImageTag, :ScanStatus, :CveProgress, :RiskProgress, :VirusProgress
def initialize(imageid=nil, registrytype=nil, imagerepoaddress=nil, instanceid=nil, instancename=nil, namespace=nil, imagename=nil, imagetag=nil, scanstatus=nil, cveprogress=nil, riskprogress=nil, virusprogress=nil)
@ImageId = imageid
@RegistryType = registrytype
@ImageRepoAddress = imagerepoaddress
@InstanceId = instanceid
@InstanceName = instancename
@Namespace = namespace
@ImageName = imagename
@ImageTag = imagetag
@ScanStatus = scanstatus
@CveProgress = cveprogress
@RiskProgress = riskprogress
@VirusProgress = virusprogress
end
def deserialize(params)
@ImageId = params['ImageId']
@RegistryType = params['RegistryType']
@ImageRepoAddress = params['ImageRepoAddress']
@InstanceId = params['InstanceId']
@InstanceName = params['InstanceName']
@Namespace = params['Namespace']
@ImageName = params['ImageName']
@ImageTag = params['ImageTag']
@ScanStatus = params['ScanStatus']
@CveProgress = params['CveProgress']
@RiskProgress = params['RiskProgress']
@VirusProgress = params['VirusProgress']
end
end
# 容器安全镜像仓库列表
class ImageRepoInfo < TencentCloud::Common::AbstractModel
# @param ImageDigest: 镜像Digest
# @type ImageDigest: String
# @param ImageRepoAddress: 镜像仓库地址
# @type ImageRepoAddress: String
# @param RegistryType: 仓库类型
# @type RegistryType: String
# @param ImageName: 镜像名称
# @type ImageName: String
# @param ImageTag: 镜像版本
# @type ImageTag: String
# @param ImageSize: 镜像大小
# @type ImageSize: Integer
# @param ScanTime: 最近扫描时间
# @type ScanTime: String
# @param ScanStatus: 扫描状态
# @type ScanStatus: String
# @param VulCnt: 安全漏洞数
# @type VulCnt: Integer
# @param VirusCnt: 木马病毒数
# @type VirusCnt: Integer
# @param RiskCnt: 风险行为数
# @type RiskCnt: Integer
# @param SentiveInfoCnt: 敏感信息数
# @type SentiveInfoCnt: Integer
# @param IsTrustImage: 是否可信镜像
# @type IsTrustImage: Boolean
# @param OsName: 镜像系统
# @type OsName: String
# @param ScanVirusError: 木马扫描错误
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ScanVirusError: String
# @param ScanVulError: 漏洞扫描错误
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ScanVulError: String
# @param InstanceId: 实例id
# @type InstanceId: String
# @param InstanceName: 实例名称
# @type InstanceName: String
# @param Namespace: 命名空间
# @type Namespace: String
# @param ScanRiskError: 高危扫描错误
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ScanRiskError: String
# @param ScanVirusProgress: 敏感信息扫描进度
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ScanVirusProgress: Integer
# @param ScanVulProgress: 木马扫描进度
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ScanVulProgress: Integer
# @param ScanRiskProgress: 漏洞扫描进度
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ScanRiskProgress: Integer
# @param ScanRemainTime: 剩余扫描时间秒
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ScanRemainTime: Integer
# @param CveStatus: cve扫描状态
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CveStatus: String
# @param RiskStatus: 高危扫描状态
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RiskStatus: String
# @param VirusStatus: 木马扫描状态
# 注意：此字段可能返回 null，表示取不到有效值。
# @type VirusStatus: String
# @param Progress: 总进度
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Progress: Integer
# @param IsAuthorized: 授权状态
# @type IsAuthorized: Integer
# @param RegistryRegion: 仓库区域
# @type RegistryRegion: String
# @param Id: 列表id
# @type Id: Integer
# @param ImageId: 镜像Id
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ImageId: String
# @param ImageCreateTime: 镜像创建的时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ImageCreateTime: String
# @param IsLatestImage: 是否为镜像的最新版本
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IsLatestImage: Boolean
attr_accessor :ImageDigest, :ImageRepoAddress, :RegistryType, :ImageName, :ImageTag, :ImageSize, :ScanTime, :ScanStatus, :VulCnt, :VirusCnt, :RiskCnt, :SentiveInfoCnt, :IsTrustImage, :OsName, :ScanVirusError, :ScanVulError, :InstanceId, :InstanceName, :Namespace, :ScanRiskError, :ScanVirusProgress, :ScanVulProgress, :ScanRiskProgress, :ScanRemainTime, :CveStatus, :RiskStatus, :VirusStatus, :Progress, :IsAuthorized, :RegistryRegion, :Id, :ImageId, :ImageCreateTime, :IsLatestImage
def initialize(imagedigest=nil, imagerepoaddress=nil, registrytype=nil, imagename=nil, imagetag=nil, imagesize=nil, scantime=nil, scanstatus=nil, vulcnt=nil, viruscnt=nil, riskcnt=nil, sentiveinfocnt=nil, istrustimage=nil, osname=nil, scanviruserror=nil, scanvulerror=nil, instanceid=nil, instancename=nil, namespace=nil, scanriskerror=nil, scanvirusprogress=nil, scanvulprogress=nil, scanriskprogress=nil, scanremaintime=nil, cvestatus=nil, riskstatus=nil, virusstatus=nil, progress=nil, isauthorized=nil, registryregion=nil, id=nil, imageid=nil, imagecreatetime=nil, islatestimage=nil)
@ImageDigest = imagedigest
@ImageRepoAddress = imagerepoaddress
@RegistryType = registrytype
@ImageName = imagename
@ImageTag = imagetag
@ImageSize = imagesize
@ScanTime = scantime
@ScanStatus = scanstatus
@VulCnt = vulcnt
@VirusCnt = viruscnt
@RiskCnt = riskcnt
@SentiveInfoCnt = sentiveinfocnt
@IsTrustImage = istrustimage
@OsName = osname
@ScanVirusError = scanviruserror
@ScanVulError = scanvulerror
@InstanceId = instanceid
@InstanceName = instancename
@Namespace = namespace
@ScanRiskError = scanriskerror
@ScanVirusProgress = scanvirusprogress
@ScanVulProgress = scanvulprogress
@ScanRiskProgress = scanriskprogress
@ScanRemainTime = scanremaintime
@CveStatus = cvestatus
@RiskStatus = riskstatus
@VirusStatus = virusstatus
@Progress = progress
@IsAuthorized = isauthorized
@RegistryRegion = registryregion
@Id = id
@ImageId = imageid
@ImageCreateTime = imagecreatetime
@IsLatestImage = islatestimage
end
def deserialize(params)
@ImageDigest = params['ImageDigest']
@ImageRepoAddress = params['ImageRepoAddress']
@RegistryType = params['RegistryType']
@ImageName = params['ImageName']
@ImageTag = params['ImageTag']
@ImageSize = params['ImageSize']
@ScanTime = params['ScanTime']
@ScanStatus = params['ScanStatus']
@VulCnt = params['VulCnt']
@VirusCnt = params['VirusCnt']
@RiskCnt = params['RiskCnt']
@SentiveInfoCnt = params['SentiveInfoCnt']
@IsTrustImage = params['IsTrustImage']
@OsName = params['OsName']
@ScanVirusError = params['ScanVirusError']
@ScanVulError = params['ScanVulError']
@InstanceId = params['InstanceId']
@InstanceName = params['InstanceName']
@Namespace = params['Namespace']
@ScanRiskError = params['ScanRiskError']
@ScanVirusProgress = params['ScanVirusProgress']
@ScanVulProgress = params['ScanVulProgress']
@ScanRiskProgress = params['ScanRiskProgress']
@ScanRemainTime = params['ScanRemainTime']
@CveStatus = params['CveStatus']
@RiskStatus = params['RiskStatus']
@VirusStatus = params['VirusStatus']
@Progress = params['Progress']
@IsAuthorized = params['IsAuthorized']
@RegistryRegion = params['RegistryRegion']
@Id = params['Id']
@ImageId = params['ImageId']
@ImageCreateTime = params['ImageCreateTime']
@IsLatestImage = params['IsLatestImage']
end
end
# 容器安全镜像高危行为信息
class ImageRisk < TencentCloud::Common::AbstractModel
# @param Behavior: 高危行为
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Behavior: Integer
# @param Type: 种类
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Type: Integer
# @param Level: 风险等级
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Level: String
# @param Desc: 描述
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Desc: String
# @param InstructionContent: 解决方案
# 注意：此字段可能返回 null，表示取不到有效值。
# @type InstructionContent: String
attr_accessor :Behavior, :Type, :Level, :Desc, :InstructionContent
def initialize(behavior=nil, type=nil, level=nil, desc=nil, instructioncontent=nil)
@Behavior = behavior
@Type = type
@Level = level
@Desc = desc
@InstructionContent = instructioncontent
end
def deserialize(params)
@Behavior = params['Behavior']
@Type = params['Type']
@Level = params['Level']
@Desc = params['Desc']
@InstructionContent = params['InstructionContent']
end
end
# 镜像风险详情
class ImageRiskInfo < TencentCloud::Common::AbstractModel
# @param Behavior: 行为
# @type Behavior: Integer
# @param Type: 类型
# @type Type: Integer
# @param Level: 级别
# @type Level: Integer
# @param Desc: 详情
# @type Desc: String
# @param InstructionContent: 解决方案
# @type InstructionContent: String
attr_accessor :Behavior, :Type, :Level, :Desc, :InstructionContent
def initialize(behavior=nil, type=nil, level=nil, desc=nil, instructioncontent=nil)
@Behavior = behavior
@Type = type
@Level = level
@Desc = desc
@InstructionContent = instructioncontent
end
def deserialize(params)
@Behavior = params['Behavior']
@Type = params['Type']
@Level = params['Level']
@Desc = params['Desc']
@InstructionContent = params['InstructionContent']
end
end
# 运行时安全事件趋势信息
class ImageRiskTendencyInfo < TencentCloud::Common::AbstractModel
# @param ImageRiskSet: 趋势列表
# @type ImageRiskSet: Array
# @param ImageRiskType: 风险类型：
# IRT_VULNERABILITY : 安全漏洞
# IRT_MALWARE_VIRUS: 木马病毒
# IRT_RISK:敏感信息
# @type ImageRiskType: String
attr_accessor :ImageRiskSet, :ImageRiskType
def initialize(imageriskset=nil, imagerisktype=nil)
@ImageRiskSet = imageriskset
@ImageRiskType = imagerisktype
end
def deserialize(params)
unless params['ImageRiskSet'].nil?
@ImageRiskSet = []
params['ImageRiskSet'].each do |i|
runtimetendencyinfo_tmp = RunTimeTendencyInfo.new
runtimetendencyinfo_tmp.deserialize(i)
@ImageRiskSet << runtimetendencyinfo_tmp
end
end
@ImageRiskType = params['ImageRiskType']
end
end
# 镜像列表
class ImageSimpleInfo < TencentCloud::Common::AbstractModel
# @param ImageID: 镜像id
# @type ImageID: String
# @param ImageName: 镜像名称
# @type ImageName: String
# @param Size: 镜像大小
# @type Size: Integer
# @param ImageType: 类型
# @type ImageType: String
# @param ContainerCnt: 关联容器数
# @type ContainerCnt: Integer
attr_accessor :ImageID, :ImageName, :Size, :ImageType, :ContainerCnt
def initialize(imageid=nil, imagename=nil, size=nil, imagetype=nil, containercnt=nil)
@ImageID = imageid
@ImageName = imagename
@Size = size
@ImageType = imagetype
@ContainerCnt = containercnt
end
def deserialize(params)
@ImageID = params['ImageID']
@ImageName = params['ImageName']
@Size = params['Size']
@ImageType = params['ImageType']
@ContainerCnt = params['ContainerCnt']
end
end
# 容器安全镜像病毒信息
class ImageVirus < TencentCloud::Common::AbstractModel
# @param Path: 路径
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Path: String
# @param RiskLevel: 风险等级
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RiskLevel: String
# @param Category: 分类
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Category: String
# @param VirusName: 病毒名称
# 注意：此字段可能返回 null，表示取不到有效值。
# @type VirusName: String
# @param Tags: 标签
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Tags: Array
# @param Desc: 描述
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Desc: String
# @param Solution: 解决方案
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Solution: String
# @param FileType: 文件类型
# 注意：此字段可能返回 null，表示取不到有效值。
# @type FileType: String
# @param FileName: 文件路径
# 注意：此字段可能返回 null，表示取不到有效值。
# @type FileName: String
# @param FileMd5: 文件md5
# 注意：此字段可能返回 null，表示取不到有效值。
# @type FileMd5: String
# @param FileSize: 大小
# 注意：此字段可能返回 null，表示取不到有效值。
# @type FileSize: Integer
# @param FirstScanTime: 首次发现时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type FirstScanTime: String
# @param LatestScanTime: 最近扫描时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type LatestScanTime: String
attr_accessor :Path, :RiskLevel, :Category, :VirusName, :Tags, :Desc, :Solution, :FileType, :FileName, :FileMd5, :FileSize, :FirstScanTime, :LatestScanTime
def initialize(path=nil, risklevel=nil, category=nil, virusname=nil, tags=nil, desc=nil, solution=nil, filetype=nil, filename=nil, filemd5=nil, filesize=nil, firstscantime=nil, latestscantime=nil)
@Path = path
@RiskLevel = risklevel
@Category = category
@VirusName = virusname
@Tags = tags
@Desc = desc
@Solution = solution
@FileType = filetype
@FileName = filename
@FileMd5 = filemd5
@FileSize = filesize
@FirstScanTime = firstscantime
@LatestScanTime = latestscantime
end
def deserialize(params)
@Path = params['Path']
@RiskLevel = params['RiskLevel']
@Category = params['Category']
@VirusName = params['VirusName']
@Tags = params['Tags']
@Desc = params['Desc']
@Solution = params['Solution']
@FileType = params['FileType']
@FileName = params['FileName']
@FileMd5 = params['FileMd5']
@FileSize = params['FileSize']
@FirstScanTime = params['FirstScanTime']
@LatestScanTime = params['LatestScanTime']
end
end
# 容器安全镜像病毒信息
class ImageVirusInfo < TencentCloud::Common::AbstractModel
# @param Path: 路径
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Path: String
# @param RiskLevel: 风险等级
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RiskLevel: Integer
# @param VirusName: 病毒名称
# 注意：此字段可能返回 null，表示取不到有效值。
# @type VirusName: String
# @param Tags: 标签
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Tags: Array
# @param Desc: 描述
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Desc: String
# @param Solution: 修护建议
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Solution: String
# @param Size: 大小
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Size: Integer
# @param FirstScanTime: 首次发现时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type FirstScanTime: String
# @param LatestScanTime: 最近扫描时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type LatestScanTime: String
# @param Md5: 文件md5
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Md5: String
# @param FileName: 文件名称
# 注意：此字段可能返回 null，表示取不到有效值。
# @type FileName: String
attr_accessor :Path, :RiskLevel, :VirusName, :Tags, :Desc, :Solution, :Size, :FirstScanTime, :LatestScanTime, :Md5, :FileName
def initialize(path=nil, risklevel=nil, virusname=nil, tags=nil, desc=nil, solution=nil, size=nil, firstscantime=nil, latestscantime=nil, md5=nil, filename=nil)
@Path = path
@RiskLevel = risklevel
@VirusName = virusname
@Tags = tags
@Desc = desc
@Solution = solution
@Size = size
@FirstScanTime = firstscantime
@LatestScanTime = latestscantime
@Md5 = md5
@FileName = filename
end
def deserialize(params)
@Path = params['Path']
@RiskLevel = params['RiskLevel']
@VirusName = params['VirusName']
@Tags = params['Tags']
@Desc = params['Desc']
@Solution = params['Solution']
@Size = params['Size']
@FirstScanTime = params['FirstScanTime']
@LatestScanTime = params['LatestScanTime']
@Md5 = params['Md5']
@FileName = params['FileName']
end
end
# 容器安全镜像漏洞信息
class ImageVul < TencentCloud::Common::AbstractModel
# @param CVEID: 漏洞id
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CVEID: String
# @param POCID: 观点验证程序id
# 注意：此字段可能返回 null，表示取不到有效值。
# @type POCID: String
# @param Name: 漏洞名称
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Name: String
# @param Components: 涉及组件信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Components: Array
# @param Category: 分类
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Category: String
# @param CategoryType: 分类2
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CategoryType: String
# @param Level: 风险等级
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Level: String
# @param Des: 描述
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Des: String
# @param OfficialSolution: 解决方案
# 注意：此字段可能返回 null，表示取不到有效值。
# @type OfficialSolution: String
# @param Reference: 引用
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Reference: String
# @param DefenseSolution: 防御方案
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DefenseSolution: String
# @param SubmitTime: 提交时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SubmitTime: String
# @param CvssScore: Cvss分数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CvssScore: String
# @param CvssVector: Cvss信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CvssVector: String
# @param IsSuggest: 是否建议修复
# 注意：此字段可能返回 null，表示取不到有效值。
# @type IsSuggest: String
# @param FixedVersions: 修复版本号
# 注意：此字段可能返回 null，表示取不到有效值。
# @type FixedVersions: String
# @param Tag: 漏洞标签:"CanBeFixed","DynamicLevelPoc","DynamicLevelExp"
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Tag: Array
# @param Component: 组件名
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Component: String
# @param Version: 组件版本
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Version: String
attr_accessor :CVEID, :POCID, :Name, :Components, :Category, :CategoryType, :Level, :Des, :OfficialSolution, :Reference, :DefenseSolution, :SubmitTime, :CvssScore, :CvssVector, :IsSuggest, :FixedVersions, :Tag, :Component, :Version
def initialize(cveid=nil, pocid=nil, name=nil, components=nil, category=nil, categorytype=nil, level=nil, des=nil, officialsolution=nil, reference=nil, defensesolution=nil, submittime=nil, cvssscore=nil, cvssvector=nil, issuggest=nil, fixedversions=nil, tag=nil, component=nil, version=nil)
@CVEID = cveid
@POCID = pocid
@Name = name
@Components = components
@Category = category
@CategoryType = categorytype
@Level = level
@Des = des
@OfficialSolution = officialsolution
@Reference = reference
@DefenseSolution = defensesolution
@SubmitTime = submittime
@CvssScore = cvssscore
@CvssVector = cvssvector
@IsSuggest = issuggest
@FixedVersions = fixedversions
@Tag = tag
@Component = component
@Version = version
end
def deserialize(params)
@CVEID = params['CVEID']
@POCID = params['POCID']
@Name = params['Name']
unless params['Components'].nil?
@Components = []
params['Components'].each do |i|
componentsinfo_tmp = ComponentsInfo.new
componentsinfo_tmp.deserialize(i)
@Components << componentsinfo_tmp
end
end
@Category = params['Category']
@CategoryType = params['CategoryType']
@Level = params['Level']
@Des = params['Des']
@OfficialSolution = params['OfficialSolution']
@Reference = params['Reference']
@DefenseSolution = params['DefenseSolution']
@SubmitTime = params['SubmitTime']
@CvssScore = params['CvssScore']
@CvssVector = params['CvssVector']
@IsSuggest = params['IsSuggest']
@FixedVersions = params['FixedVersions']
@Tag = params['Tag']
@Component = params['Component']
@Version = params['Version']
end
end
# 查询镜像绑定的运行时规则信息
class ImagesBindRuleInfo < TencentCloud::Common::AbstractModel
# @param ImageId: 镜像id
# @type ImageId: String
# @param ImageName: 镜像名称
# @type ImageName: String
# @param ContainerCnt: 关联容器数量
# @type ContainerCnt: Integer
# @param RuleId: 绑定规则id
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RuleId: String
# @param RuleName: 规则名字
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RuleName: String
# @param ImageSize: 镜像大小
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ImageSize: Integer
# @param ScanTime: 最近扫描时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ScanTime: String
attr_accessor :ImageId, :ImageName, :ContainerCnt, :RuleId, :RuleName, :ImageSize, :ScanTime
def initialize(imageid=nil, imagename=nil, containercnt=nil, ruleid=nil, rulename=nil, imagesize=nil, scantime=nil)
@ImageId = imageid
@ImageName = imagename
@ContainerCnt = containercnt
@RuleId = ruleid
@RuleName = rulename
@ImageSize = imagesize
@ScanTime = scantime
end
def deserialize(params)
@ImageId = params['ImageId']
@ImageName = params['ImageName']
@ContainerCnt = params['ContainerCnt']
@RuleId = params['RuleId']
@RuleName = params['RuleName']
@ImageSize = params['ImageSize']
@ScanTime = params['ScanTime']
end
end
# 容器安全镜像列表
class ImagesInfo < TencentCloud::Common::AbstractModel
# @param ImageID: 镜像id
# @type ImageID: String
# @param ImageName: 镜像名称
# @type ImageName: String
# @param CreateTime: 创建时间
# @type CreateTime: String
# @param Size: 镜像大小
# @type Size: Integer
# @param HostCnt: 主机个数
# @type HostCnt: Integer
# @param ContainerCnt: 容器个数
# @type ContainerCnt: Integer
# @param ScanTime: 扫描时间
# @type ScanTime: String
# @param VulCnt: 漏洞个数
# @type VulCnt: Integer
# @param VirusCnt: 病毒个数
# @type VirusCnt: Integer
# @param RiskCnt: 敏感信息个数
# @type RiskCnt: Integer
# @param IsTrustImage: 是否信任镜像
# @type IsTrustImage: Boolean
# @param OsName: 镜像系统
# @type OsName: String
# @param AgentError: agent镜像扫描错误
# @type AgentError: String
# @param ScanError: 后端镜像扫描错误
# @type ScanError: String
# @param ScanStatus: 扫描状态
# @type ScanStatus: String
# @param ScanVirusError: 木马扫描错误信息
# @type ScanVirusError: String
# @param ScanVulError: 漏洞扫描错误信息
# @type ScanVulError: String
# @param ScanRiskError: 风险扫描错误信息
# @type ScanRiskError: String
# @param IsSuggest: 是否是重点关注镜像，为0不是，非0是
# @type IsSuggest: Integer
# @param IsAuthorized: 是否授权，1是0否
# @type IsAuthorized: Integer
# @param ComponentCnt: 组件个数
# @type ComponentCnt: Integer
attr_accessor :ImageID, :ImageName, :CreateTime, :Size, :HostCnt, :ContainerCnt, :ScanTime, :VulCnt, :VirusCnt, :RiskCnt, :IsTrustImage, :OsName, :AgentError, :ScanError, :ScanStatus, :ScanVirusError, :ScanVulError, :ScanRiskError, :IsSuggest, :IsAuthorized, :ComponentCnt
def initialize(imageid=nil, imagename=nil, createtime=nil, size=nil, hostcnt=nil, containercnt=nil, scantime=nil, vulcnt=nil, viruscnt=nil, riskcnt=nil, istrustimage=nil, osname=nil, agenterror=nil, scanerror=nil, scanstatus=nil, scanviruserror=nil, scanvulerror=nil, scanriskerror=nil, issuggest=nil, isauthorized=nil, componentcnt=nil)
@ImageID = imageid
@ImageName = imagename
@CreateTime = createtime
@Size = size
@HostCnt = hostcnt
@ContainerCnt = containercnt
@ScanTime = scantime
@VulCnt = vulcnt
@VirusCnt = viruscnt
@RiskCnt = riskcnt
@IsTrustImage = istrustimage
@OsName = osname
@AgentError = agenterror
@ScanError = scanerror
@ScanStatus = scanstatus
@ScanVirusError = scanviruserror
@ScanVulError = scanvulerror
@ScanRiskError = scanriskerror
@IsSuggest = issuggest
@IsAuthorized = isauthorized
@ComponentCnt = componentcnt
end
def deserialize(params)
@ImageID = params['ImageID']
@ImageName = params['ImageName']
@CreateTime = params['CreateTime']
@Size = params['Size']
@HostCnt = params['HostCnt']
@ContainerCnt = params['ContainerCnt']
@ScanTime = params['ScanTime']
@VulCnt = params['VulCnt']
@VirusCnt = params['VirusCnt']
@RiskCnt = params['RiskCnt']
@IsTrustImage = params['IsTrustImage']
@OsName = params['OsName']
@AgentError = params['AgentError']
@ScanError = params['ScanError']
@ScanStatus = params['ScanStatus']
@ScanVirusError = params['ScanVirusError']
@ScanVulError = params['ScanVulError']
@ScanRiskError = params['ScanRiskError']
@IsSuggest = params['IsSuggest']
@IsAuthorized = params['IsAuthorized']
@ComponentCnt = params['ComponentCnt']
end
end
# 容器安全镜像漏洞
class ImagesVul < TencentCloud::Common::AbstractModel
# @param CVEID: 漏洞id
# @type CVEID: String
# @param Name: 漏洞名称
# @type Name: String
# @param Component: 组件
# @type Component: String
# @param Version: 版本
# @type Version: String
# @param Category: 分类
# @type Category: String
# @param CategoryType: 分类2
# @type CategoryType: String
# @param Level: 风险等级
# @type Level: Integer
# @param Des: 描述
# @type Des: String
# @param OfficialSolution: 解决方案
# @type OfficialSolution: String
# @param Reference: 引用
# @type Reference: String
# @param DefenseSolution: 防御方案
# @type DefenseSolution: String
# @param SubmitTime: 提交时间
# @type SubmitTime: String
# @param CVSSV3Score: CVSS V3分数
# @type CVSSV3Score: Float
# @param CVSSV3Desc: CVSS V3描述
# @type CVSSV3Desc: String
# @param IsSuggest: 是否是重点关注：true：是，false：不是
# @type IsSuggest: Boolean
# @param FixedVersions: 修复版本号
# 注意：此字段可能返回 null，表示取不到有效值。
# @type FixedVersions: String
# @param Tag: 漏洞标签:"CanBeFixed","DynamicLevelPoc","DynamicLevelExp"
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Tag: Array
attr_accessor :CVEID, :Name, :Component, :Version, :Category, :CategoryType, :Level, :Des, :OfficialSolution, :Reference, :DefenseSolution, :SubmitTime, :CVSSV3Score, :CVSSV3Desc, :IsSuggest, :FixedVersions, :Tag
def initialize(cveid=nil, name=nil, component=nil, version=nil, category=nil, categorytype=nil, level=nil, des=nil, officialsolution=nil, reference=nil, defensesolution=nil, submittime=nil, cvssv3score=nil, cvssv3desc=nil, issuggest=nil, fixedversions=nil, tag=nil)
@CVEID = cveid
@Name = name
@Component = component
@Version = version
@Category = category
@CategoryType = categorytype
@Level = level
@Des = des
@OfficialSolution = officialsolution
@Reference = reference
@DefenseSolution = defensesolution
@SubmitTime = submittime
@CVSSV3Score = cvssv3score
@CVSSV3Desc = cvssv3desc
@IsSuggest = issuggest
@FixedVersions = fixedversions
@Tag = tag
end
def deserialize(params)
@CVEID = params['CVEID']
@Name = params['Name']
@Component = params['Component']
@Version = params['Version']
@Category = params['Category']
@CategoryType = params['CategoryType']
@Level = params['Level']
@Des = params['Des']
@OfficialSolution = params['OfficialSolution']
@Reference = params['Reference']
@DefenseSolution = params['DefenseSolution']
@SubmitTime = params['SubmitTime']
@CVSSV3Score = params['CVSSV3Score']
@CVSSV3Desc = params['CVSSV3Desc']
@IsSuggest = params['IsSuggest']
@FixedVersions = params['FixedVersions']
@Tag = params['Tag']
end
end
# InitializeUserComplianceEnvironment请求参数结构体
class InitializeUserComplianceEnvironmentRequest < TencentCloud::Common::AbstractModel
def initialize()
end
def deserialize(params)
end
end
# InitializeUserComplianceEnvironment返回参数结构体
class InitializeUserComplianceEnvironmentResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyAbnormalProcessRuleStatus请求参数结构体
class ModifyAbnormalProcessRuleStatusRequest < TencentCloud::Common::AbstractModel
# @param RuleIdSet: 策略的ids
# @type RuleIdSet: Array
# @param IsEnable: 策略开关，true开启，false关闭
# @type IsEnable: Boolean
attr_accessor :RuleIdSet, :IsEnable
def initialize(ruleidset=nil, isenable=nil)
@RuleIdSet = ruleidset
@IsEnable = isenable
end
def deserialize(params)
@RuleIdSet = params['RuleIdSet']
@IsEnable = params['IsEnable']
end
end
# ModifyAbnormalProcessRuleStatus返回参数结构体
class ModifyAbnormalProcessRuleStatusResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyAbnormalProcessStatus请求参数结构体
class ModifyAbnormalProcessStatusRequest < TencentCloud::Common::AbstractModel
# @param EventIdSet: 处理事件ids
# @type EventIdSet: Array
# @param Status: 标记事件的状态，
# EVENT_DEALED:事件处理
# EVENT_INGNORE"：事件忽略
# EVENT_DEL:事件删除
# EVENT_ADD_WHITE:事件加白
# @type Status: String
# @param Remark: 事件备注
# @type Remark: String
attr_accessor :EventIdSet, :Status, :Remark
def initialize(eventidset=nil, status=nil, remark=nil)
@EventIdSet = eventidset
@Status = status
@Remark = remark
end
def deserialize(params)
@EventIdSet = params['EventIdSet']
@Status = params['Status']
@Remark = params['Remark']
end
end
# ModifyAbnormalProcessStatus返回参数结构体
class ModifyAbnormalProcessStatusResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyAccessControlRuleStatus请求参数结构体
class ModifyAccessControlRuleStatusRequest < TencentCloud::Common::AbstractModel
# @param RuleIdSet: 策略的ids
# @type RuleIdSet: Array
# @param IsEnable: 策略开关，true:代表开启， false代表关闭
# @type IsEnable: Boolean
attr_accessor :RuleIdSet, :IsEnable
def initialize(ruleidset=nil, isenable=nil)
@RuleIdSet = ruleidset
@IsEnable = isenable
end
def deserialize(params)
@RuleIdSet = params['RuleIdSet']
@IsEnable = params['IsEnable']
end
end
# ModifyAccessControlRuleStatus返回参数结构体
class ModifyAccessControlRuleStatusResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyAccessControlStatus请求参数结构体
class ModifyAccessControlStatusRequest < TencentCloud::Common::AbstractModel
# @param EventIdSet: 处理事件ids
# @type EventIdSet: Array
# @param Status: 标记事件的状态，
# EVENT_DEALED:事件已经处理
# EVENT_INGNORE：事件忽略
# EVENT_DEL:事件删除
# EVENT_ADD_WHITE:事件加白
# @type Status: String
# @param Remark: 备注事件信息
# @type Remark: String
attr_accessor :EventIdSet, :Status, :Remark
def initialize(eventidset=nil, status=nil, remark=nil)
@EventIdSet = eventidset
@Status = status
@Remark = remark
end
def deserialize(params)
@EventIdSet = params['EventIdSet']
@Status = params['Status']
@Remark = params['Remark']
end
end
# ModifyAccessControlStatus返回参数结构体
class ModifyAccessControlStatusResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyAssetImageRegistryScanStopOneKey请求参数结构体
class ModifyAssetImageRegistryScanStopOneKeyRequest < TencentCloud::Common::AbstractModel
# @param All: 是否扫描全部镜像
# @type All: Boolean
# @param Images: 扫描的镜像列表
# @type Images: Array
# @param Id: 扫描的镜像列表Id
# @type Id: Array
attr_accessor :All, :Images, :Id
def initialize(all=nil, images=nil, id=nil)
@All = all
@Images = images
@Id = id
end
def deserialize(params)
@All = params['All']
unless params['Images'].nil?
@Images = []
params['Images'].each do |i|
imageinfo_tmp = ImageInfo.new
imageinfo_tmp.deserialize(i)
@Images << imageinfo_tmp
end
end
@Id = params['Id']
end
end
# ModifyAssetImageRegistryScanStopOneKey返回参数结构体
class ModifyAssetImageRegistryScanStopOneKeyResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyAssetImageRegistryScanStop请求参数结构体
class ModifyAssetImageRegistryScanStopRequest < TencentCloud::Common::AbstractModel
# @param All: 是否扫描全部镜像
# @type All: Boolean
# @param Images: 扫描的镜像列表
# @type Images: Array
# @param Id: 扫描的镜像列表
# @type Id: Array
# @param Filters: 过滤条件
# @type Filters: Array
# @param ExcludeImageList: 不要扫描的镜像列表，与Filters配合使用
# @type ExcludeImageList: Array
# @param OnlyScanLatest: 是否仅扫描各repository最新版本的镜像
# @type OnlyScanLatest: Boolean
attr_accessor :All, :Images, :Id, :Filters, :ExcludeImageList, :OnlyScanLatest
def initialize(all=nil, images=nil, id=nil, filters=nil, excludeimagelist=nil, onlyscanlatest=nil)
@All = all
@Images = images
@Id = id
@Filters = filters
@ExcludeImageList = excludeimagelist
@OnlyScanLatest = onlyscanlatest
end
def deserialize(params)
@All = params['All']
unless params['Images'].nil?
@Images = []
params['Images'].each do |i|
imageinfo_tmp = ImageInfo.new
imageinfo_tmp.deserialize(i)
@Images << imageinfo_tmp
end
end
@Id = params['Id']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
assetfilters_tmp = AssetFilters.new
assetfilters_tmp.deserialize(i)
@Filters << assetfilters_tmp
end
end
@ExcludeImageList = params['ExcludeImageList']
@OnlyScanLatest = params['OnlyScanLatest']
end
end
# ModifyAssetImageRegistryScanStop返回参数结构体
class ModifyAssetImageRegistryScanStopResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyAssetImageScanStop请求参数结构体
class ModifyAssetImageScanStopRequest < TencentCloud::Common::AbstractModel
# @param TaskID: 任务id；任务id，镜像id和根据过滤条件筛选三选一。
# @type TaskID: String
# @param Images: 镜像id；任务id，镜像id和根据过滤条件筛选三选一。
# @type Images: Array
# @param Filters: 根据过滤条件筛选出镜像；任务id，镜像id和根据过滤条件筛选三选一。
# @type Filters: Array
# @param ExcludeImageIds: 根据过滤条件筛选出镜像，再排除个别镜像
# @type ExcludeImageIds: String
attr_accessor :TaskID, :Images, :Filters, :ExcludeImageIds
def initialize(taskid=nil, images=nil, filters=nil, excludeimageids=nil)
@TaskID = taskid
@Images = images
@Filters = filters
@ExcludeImageIds = excludeimageids
end
def deserialize(params)
@TaskID = params['TaskID']
@Images = params['Images']
unless params['Filters'].nil?
@Filters = []
params['Filters'].each do |i|
assetfilters_tmp = AssetFilters.new
assetfilters_tmp.deserialize(i)
@Filters << assetfilters_tmp
end
end
@ExcludeImageIds = params['ExcludeImageIds']
end
end
# ModifyAssetImageScanStop返回参数结构体
class ModifyAssetImageScanStopResponse < TencentCloud::Common::AbstractModel
# @param Status: 停止状态
# @type Status: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Status, :RequestId
def initialize(status=nil, requestid=nil)
@Status = status
@RequestId = requestid
end
def deserialize(params)
@Status = params['Status']
@RequestId = params['RequestId']
end
end
# ModifyAsset请求参数结构体
class ModifyAssetRequest < TencentCloud::Common::AbstractModel
# @param All: 全部同步
# @type All: Boolean
# @param Hosts: 要同步的主机列表 两个参数必选一个 All优先
# @type Hosts: Array
attr_accessor :All, :Hosts
def initialize(all=nil, hosts=nil)
@All = all
@Hosts = hosts
end
def deserialize(params)
@All = params['All']
@Hosts = params['Hosts']
end
end
# ModifyAsset返回参数结构体
class ModifyAssetResponse < TencentCloud::Common::AbstractModel
# @param Status: 同步任务发送结果
# @type Status: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :Status, :RequestId
def initialize(status=nil, requestid=nil)
@Status = status
@RequestId = requestid
end
def deserialize(params)
@Status = params['Status']
@RequestId = params['RequestId']
end
end
# ModifyCompliancePeriodTask请求参数结构体
class ModifyCompliancePeriodTaskRequest < TencentCloud::Common::AbstractModel
# @param PeriodTaskId: 要修改的定时任务的ID，由DescribeCompliancePeriodTaskList接口返回。
# @type PeriodTaskId: Integer
# @param PeriodRule: 定时任务的周期规则。不填时，不修改。
# @type PeriodRule: :class:`Tencentcloud::Tcss.v20201101.models.CompliancePeriodTaskRule`
# @param StandardSettings: 设置合规标准。不填时，不修改。
# @type StandardSettings: Array
attr_accessor :PeriodTaskId, :PeriodRule, :StandardSettings
def initialize(periodtaskid=nil, periodrule=nil, standardsettings=nil)
@PeriodTaskId = periodtaskid
@PeriodRule = periodrule
@StandardSettings = standardsettings
end
def deserialize(params)
@PeriodTaskId = params['PeriodTaskId']
unless params['PeriodRule'].nil?
@PeriodRule = CompliancePeriodTaskRule.new
@PeriodRule.deserialize(params['PeriodRule'])
end
unless params['StandardSettings'].nil?
@StandardSettings = []
params['StandardSettings'].each do |i|
compliancebenchmarkstandardenable_tmp = ComplianceBenchmarkStandardEnable.new
compliancebenchmarkstandardenable_tmp.deserialize(i)
@StandardSettings << compliancebenchmarkstandardenable_tmp
end
end
end
end
# ModifyCompliancePeriodTask返回参数结构体
class ModifyCompliancePeriodTaskResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyEscapeEventStatus请求参数结构体
class ModifyEscapeEventStatusRequest < TencentCloud::Common::AbstractModel
# @param EventIdSet: 处理事件ids
# @type EventIdSet: Array
# @param Status: 标记事件的状态：EVENT_UNDEAL:未处理（取消忽略），EVENT_DEALED:已处理，EVENT_IGNORE:忽略，EVENT_DELETE：已删除
# @type Status: String
# @param Remark: 备注
# @type Remark: String
attr_accessor :EventIdSet, :Status, :Remark
def initialize(eventidset=nil, status=nil, remark=nil)
@EventIdSet = eventidset
@Status = status
@Remark = remark
end
def deserialize(params)
@EventIdSet = params['EventIdSet']
@Status = params['Status']
@Remark = params['Remark']
end
end
# ModifyEscapeEventStatus返回参数结构体
class ModifyEscapeEventStatusResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyEscapeRule请求参数结构体
class ModifyEscapeRuleRequest < TencentCloud::Common::AbstractModel
# @param RuleSet: 需要修改的数组
# @type RuleSet: Array
attr_accessor :RuleSet
def initialize(ruleset=nil)
@RuleSet = ruleset
end
def deserialize(params)
unless params['RuleSet'].nil?
@RuleSet = []
params['RuleSet'].each do |i|
escaperuleenabled_tmp = EscapeRuleEnabled.new
escaperuleenabled_tmp.deserialize(i)
@RuleSet << escaperuleenabled_tmp
end
end
end
end
# ModifyEscapeRule返回参数结构体
class ModifyEscapeRuleResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyReverseShellStatus请求参数结构体
class ModifyReverseShellStatusRequest < TencentCloud::Common::AbstractModel
# @param EventIdSet: 处理事件ids
# @type EventIdSet: Array
# @param Status: 标记事件的状态，
# EVENT_DEALED:事件处理
# EVENT_INGNORE"：事件忽略
# EVENT_DEL:事件删除
# EVENT_ADD_WHITE:事件加白
# @type Status: String
# @param Remark: 事件备注
# @type Remark: String
attr_accessor :EventIdSet, :Status, :Remark
def initialize(eventidset=nil, status=nil, remark=nil)
@EventIdSet = eventidset
@Status = status
@Remark = remark
end
def deserialize(params)
@EventIdSet = params['EventIdSet']
@Status = params['Status']
@Remark = params['Remark']
end
end
# ModifyReverseShellStatus返回参数结构体
class ModifyReverseShellStatusResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyRiskSyscallStatus请求参数结构体
class ModifyRiskSyscallStatusRequest < TencentCloud::Common::AbstractModel
# @param EventIdSet: 处理事件ids
# @type EventIdSet: Array
# @param Status: 标记事件的状态，
# EVENT_DEALED:事件处理
# EVENT_INGNORE"：事件忽略
# EVENT_DEL:事件删除
# EVENT_ADD_WHITE:事件加白
# @type Status: String
# @param Remark: 事件备注
# @type Remark: String
attr_accessor :EventIdSet, :Status, :Remark
def initialize(eventidset=nil, status=nil, remark=nil)
@EventIdSet = eventidset
@Status = status
@Remark = remark
end
def deserialize(params)
@EventIdSet = params['EventIdSet']
@Status = params['Status']
@Remark = params['Remark']
end
end
# ModifyRiskSyscallStatus返回参数结构体
class ModifyRiskSyscallStatusResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyVirusFileStatus请求参数结构体
class ModifyVirusFileStatusRequest < TencentCloud::Common::AbstractModel
# @param EventIdSet: 处理事件id
# @type EventIdSet: Array
# @param Status: 标记事件的状态，
# EVENT_DEALED:事件处理
# EVENT_INGNORE"：事件忽略
# EVENT_DEL:事件删除
# EVENT_ADD_WHITE:事件加白
# EVENT_PENDING: 事件待处理
# @type Status: String
# @param Remark: 事件备注
# @type Remark: String
attr_accessor :EventIdSet, :Status, :Remark
def initialize(eventidset=nil, status=nil, remark=nil)
@EventIdSet = eventidset
@Status = status
@Remark = remark
end
def deserialize(params)
@EventIdSet = params['EventIdSet']
@Status = params['Status']
@Remark = params['Remark']
end
end
# ModifyVirusFileStatus返回参数结构体
class ModifyVirusFileStatusResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyVirusMonitorSetting请求参数结构体
class ModifyVirusMonitorSettingRequest < TencentCloud::Common::AbstractModel
# @param EnableScan: 是否开启定期扫描
# @type EnableScan: Boolean
# @param ScanPathAll: 扫描全部路径
# @type ScanPathAll: Boolean
# @param ScanPathType: 当ScanPathAll为true 生效 0扫描以下路径 1、扫描除以下路径(扫描范围只能小于等于1)
# @type ScanPathType: Integer
# @param ScanPath: 自选排除或扫描的地址
# @type ScanPath: Array
attr_accessor :EnableScan, :ScanPathAll, :ScanPathType, :ScanPath
def initialize(enablescan=nil, scanpathall=nil, scanpathtype=nil, scanpath=nil)
@EnableScan = enablescan
@ScanPathAll = scanpathall
@ScanPathType = scanpathtype
@ScanPath = scanpath
end
def deserialize(params)
@EnableScan = params['EnableScan']
@ScanPathAll = params['ScanPathAll']
@ScanPathType = params['ScanPathType']
@ScanPath = params['ScanPath']
end
end
# ModifyVirusMonitorSetting返回参数结构体
class ModifyVirusMonitorSettingResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyVirusScanSetting请求参数结构体
class ModifyVirusScanSettingRequest < TencentCloud::Common::AbstractModel
# @param EnableScan: 是否开启定期扫描
# @type EnableScan: Boolean
# @param Cycle: 检测周期每隔多少天(1|3|7)
# @type Cycle: Integer
# @param BeginScanAt: 扫描开始时间
# @type BeginScanAt: String
# @param ScanPathAll: 扫描全部路径(true:全选,false:自选)
# @type ScanPathAll: Boolean
# @param ScanPathType: 当ScanPathAll为true 生效 0扫描以下路径 1、扫描除以下路径
# @type ScanPathType: Integer
# @param Timeout: 超时时长(5~24h)
# @type Timeout: Integer
# @param ScanRangeType: 扫描范围0容器1主机节点
# @type ScanRangeType: Integer
# @param ScanRangeAll: true 全选，false 自选
# @type ScanRangeAll: Boolean
# @param ScanIds: 自选扫描范围的容器id或者主机id 根据ScanRangeType决定
# @type ScanIds: Array
# @param ScanPath: 扫描路径
# @type ScanPath: Array
attr_accessor :EnableScan, :Cycle, :BeginScanAt, :ScanPathAll, :ScanPathType, :Timeout, :ScanRangeType, :ScanRangeAll, :ScanIds, :ScanPath
def initialize(enablescan=nil, cycle=nil, beginscanat=nil, scanpathall=nil, scanpathtype=nil, timeout=nil, scanrangetype=nil, scanrangeall=nil, scanids=nil, scanpath=nil)
@EnableScan = enablescan
@Cycle = cycle
@BeginScanAt = beginscanat
@ScanPathAll = scanpathall
@ScanPathType = scanpathtype
@Timeout = timeout
@ScanRangeType = scanrangetype
@ScanRangeAll = scanrangeall
@ScanIds = scanids
@ScanPath = scanpath
end
def deserialize(params)
@EnableScan = params['EnableScan']
@Cycle = params['Cycle']
@BeginScanAt = params['BeginScanAt']
@ScanPathAll = params['ScanPathAll']
@ScanPathType = params['ScanPathType']
@Timeout = params['Timeout']
@ScanRangeType = params['ScanRangeType']
@ScanRangeAll = params['ScanRangeAll']
@ScanIds = params['ScanIds']
@ScanPath = params['ScanPath']
end
end
# ModifyVirusScanSetting返回参数结构体
class ModifyVirusScanSettingResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyVirusScanTimeoutSetting请求参数结构体
class ModifyVirusScanTimeoutSettingRequest < TencentCloud::Common::AbstractModel
# @param Timeout: 超时时长单位小时(5~24h)
# @type Timeout: Integer
# @param ScanType: 设置类型0一键检测，1定时检测
# @type ScanType: Integer
attr_accessor :Timeout, :ScanType
def initialize(timeout=nil, scantype=nil)
@Timeout = timeout
@ScanType = scantype
end
def deserialize(params)
@Timeout = params['Timeout']
@ScanType = params['ScanType']
end
end
# ModifyVirusScanTimeoutSetting返回参数结构体
class ModifyVirusScanTimeoutSettingResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# 容器安全端口信息列表
class PortInfo < TencentCloud::Common::AbstractModel
# @param Type: 类型
# @type Type: String
# @param PublicIP: 对外ip
# @type PublicIP: String
# @param PublicPort: 主机端口
# @type PublicPort: Integer
# @param ContainerPort: 容器端口
# @type ContainerPort: Integer
# @param ContainerPID: 容器Pid
# @type ContainerPID: Integer
# @param ContainerName: 容器名
# @type ContainerName: String
# @param HostID: 主机id
# @type HostID: String
# @param HostIP: 主机ip
# @type HostIP: String
# @param ProcessName: 进程名称
# @type ProcessName: String
# @param ListenContainer: 容器内监听地址
# @type ListenContainer: String
# @param ListenHost: 容器外监听地址
# @type ListenHost: String
# @param RunAs: 运行账号
# @type RunAs: String
# @param HostName: 主机名称
# @type HostName: String
# @param PublicIp: 外网ip
# @type PublicIp: String
attr_accessor :Type, :PublicIP, :PublicPort, :ContainerPort, :ContainerPID, :ContainerName, :HostID, :HostIP, :ProcessName, :ListenContainer, :ListenHost, :RunAs, :HostName, :PublicIp
def initialize(type=nil, publicip=nil, publicport=nil, containerport=nil, containerpid=nil, containername=nil, hostid=nil, hostip=nil, processname=nil, listencontainer=nil, listenhost=nil, runas=nil, hostname=nil, publicip=nil)
@Type = type
@PublicIP = publicip
@PublicPort = publicport
@ContainerPort = containerport
@ContainerPID = containerpid
@ContainerName = containername
@HostID = hostid
@HostIP = hostip
@ProcessName = processname
@ListenContainer = listencontainer
@ListenHost = listenhost
@RunAs = runas
@HostName = hostname
@PublicIp = publicip
end
def deserialize(params)
@Type = params['Type']
@PublicIP = params['PublicIP']
@PublicPort = params['PublicPort']
@ContainerPort = params['ContainerPort']
@ContainerPID = params['ContainerPID']
@ContainerName = params['ContainerName']
@HostID = params['HostID']
@HostIP = params['HostIP']
@ProcessName = params['ProcessName']
@ListenContainer = params['ListenContainer']
@ListenHost = params['ListenHost']
@RunAs = params['RunAs']
@HostName = params['HostName']
@PublicIp = params['PublicIp']
end
end
# 运行时安全，进程基础信息
class ProcessBaseInfo < TencentCloud::Common::AbstractModel
# @param ProcessStartUser: 进程启动用户
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ProcessStartUser: String
# @param ProcessUserGroup: 进程用户组
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ProcessUserGroup: String
# @param ProcessPath: 进程路径
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ProcessPath: String
# @param ProcessParam: 进程命令行参数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ProcessParam: String
attr_accessor :ProcessStartUser, :ProcessUserGroup, :ProcessPath, :ProcessParam
def initialize(processstartuser=nil, processusergroup=nil, processpath=nil, processparam=nil)
@ProcessStartUser = processstartuser
@ProcessUserGroup = processusergroup
@ProcessPath = processpath
@ProcessParam = processparam
end
def deserialize(params)
@ProcessStartUser = params['ProcessStartUser']
@ProcessUserGroup = params['ProcessUserGroup']
@ProcessPath = params['ProcessPath']
@ProcessParam = params['ProcessParam']
end
end
# 运行是安全详情，进程基础信息
class ProcessDetailBaseInfo < TencentCloud::Common::AbstractModel
# @param ProcessName: 进程名称
# @type ProcessName: String
# @param ProcessId: 进程pid
# @type ProcessId: Integer
# @param ProcessStartUser: 进程启动用户
# @type ProcessStartUser: String
# @param ProcessUserGroup: 进程用户组
# @type ProcessUserGroup: String
# @param ProcessPath: 进程路径
# @type ProcessPath: String
# @param ProcessParam: 进程命令行参数
# @type ProcessParam: String
attr_accessor :ProcessName, :ProcessId, :ProcessStartUser, :ProcessUserGroup, :ProcessPath, :ProcessParam
def initialize(processname=nil, processid=nil, processstartuser=nil, processusergroup=nil, processpath=nil, processparam=nil)
@ProcessName = processname
@ProcessId = processid
@ProcessStartUser = processstartuser
@ProcessUserGroup = processusergroup
@ProcessPath = processpath
@ProcessParam = processparam
end
def deserialize(params)
@ProcessName = params['ProcessName']
@ProcessId = params['ProcessId']
@ProcessStartUser = params['ProcessStartUser']
@ProcessUserGroup = params['ProcessUserGroup']
@ProcessPath = params['ProcessPath']
@ProcessParam = params['ProcessParam']
end
end
# 运行是安全详情，进程信息
class ProcessDetailInfo < TencentCloud::Common::AbstractModel
# @param ProcessName: 进程名称
# @type ProcessName: String
# @param ProcessAuthority: 进程权限
# @type ProcessAuthority: String
# @param ProcessId: 进程pid
# @type ProcessId: Integer
# @param ProcessStartUser: 进程启动用户
# @type ProcessStartUser: String
# @param ProcessUserGroup: 进程用户组
# @type ProcessUserGroup: String
# @param ProcessPath: 进程路径
# @type ProcessPath: String
# @param ProcessTree: 进程树
# @type ProcessTree: String
# @param ProcessMd5: 进程md5
# @type ProcessMd5: String
# @param ProcessParam: 进程命令行参数
# @type ProcessParam: String
attr_accessor :ProcessName, :ProcessAuthority, :ProcessId, :ProcessStartUser, :ProcessUserGroup, :ProcessPath, :ProcessTree, :ProcessMd5, :ProcessParam
def initialize(processname=nil, processauthority=nil, processid=nil, processstartuser=nil, processusergroup=nil, processpath=nil, processtree=nil, processmd5=nil, processparam=nil)
@ProcessName = processname
@ProcessAuthority = processauthority
@ProcessId = processid
@ProcessStartUser = processstartuser
@ProcessUserGroup = processusergroup
@ProcessPath = processpath
@ProcessTree = processtree
@ProcessMd5 = processmd5
@ProcessParam = processparam
end
def deserialize(params)
@ProcessName = params['ProcessName']
@ProcessAuthority = params['ProcessAuthority']
@ProcessId = params['ProcessId']
@ProcessStartUser = params['ProcessStartUser']
@ProcessUserGroup = params['ProcessUserGroup']
@ProcessPath = params['ProcessPath']
@ProcessTree = params['ProcessTree']
@ProcessMd5 = params['ProcessMd5']
@ProcessParam = params['ProcessParam']
end
end
# 容器安全进程列表
class ProcessInfo < TencentCloud::Common::AbstractModel
# @param StartTime: 进程启动时间
# @type StartTime: String
# @param RunAs: 运行用户
# @type RunAs: String
# @param CmdLine: 命令行参数
# @type CmdLine: String
# @param Exe: Exe路径
# @type Exe: String
# @param PID: 主机PID
# @type PID: Integer
# @param ContainerPID: 容器内pid
# @type ContainerPID: Integer
# @param ContainerName: 容器名称
# @type ContainerName: String
# @param HostID: 主机id
# @type HostID: String
# @param HostIP: 主机ip
# @type HostIP: String
# @param ProcessName: 进程名称
# @type ProcessName: String
# @param HostName: 主机名称
# @type HostName: String
# @param PublicIp: 外网ip
# @type PublicIp: String
attr_accessor :StartTime, :RunAs, :CmdLine, :Exe, :PID, :ContainerPID, :ContainerName, :HostID, :HostIP, :ProcessName, :HostName, :PublicIp
def initialize(starttime=nil, runas=nil, cmdline=nil, exe=nil, pid=nil, containerpid=nil, containername=nil, hostid=nil, hostip=nil, processname=nil, hostname=nil, publicip=nil)
@StartTime = starttime
@RunAs = runas
@CmdLine = cmdline
@Exe = exe
@PID = pid
@ContainerPID = containerpid
@ContainerName = containername
@HostID = hostid
@HostIP = hostip
@ProcessName = processname
@HostName = hostname
@PublicIp = publicip
end
def deserialize(params)
@StartTime = params['StartTime']
@RunAs = params['RunAs']
@CmdLine = params['CmdLine']
@Exe = params['Exe']
@PID = params['PID']
@ContainerPID = params['ContainerPID']
@ContainerName = params['ContainerName']
@HostID = params['HostID']
@HostIP = params['HostIP']
@ProcessName = params['ProcessName']
@HostName = params['HostName']
@PublicIp = params['PublicIp']
end
end
# RemoveAssetImageRegistryRegistryDetail请求参数结构体
class RemoveAssetImageRegistryRegistryDetailRequest < TencentCloud::Common::AbstractModel
# @param RegistryId: 仓库唯一id
# @type RegistryId: Integer
attr_accessor :RegistryId
def initialize(registryid=nil)
@RegistryId = registryid
end
def deserialize(params)
@RegistryId = params['RegistryId']
end
end
# RemoveAssetImageRegistryRegistryDetail返回参数结构体
class RemoveAssetImageRegistryRegistryDetailResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# RenewImageAuthorizeState请求参数结构体
class RenewImageAuthorizeStateRequest < TencentCloud::Common::AbstractModel
# @param AllImages: 是否全部未授权镜像
# @type AllImages: Boolean
# @param ImageIds: 镜像ids
# @type ImageIds: Array
attr_accessor :AllImages, :ImageIds
def initialize(allimages=nil, imageids=nil)
@AllImages = allimages
@ImageIds = imageids
end
def deserialize(params)
@AllImages = params['AllImages']
@ImageIds = params['ImageIds']
end
end
# RenewImageAuthorizeState返回参数结构体
class RenewImageAuthorizeStateResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# 运行时容器反弹shell事件描述信息
class ReverseShellEventDescription < TencentCloud::Common::AbstractModel
# @param Description: 描述信息
# @type Description: String
# @param Solution: 解决方案
# @type Solution: String
# @param Remark: 事件备注信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Remark: String
# @param DstAddress: 目标地址
# @type DstAddress: String
# @param OperationTime: 事件最后一次处理的时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type OperationTime: String
attr_accessor :Description, :Solution, :Remark, :DstAddress, :OperationTime
def initialize(description=nil, solution=nil, remark=nil, dstaddress=nil, operationtime=nil)
@Description = description
@Solution = solution
@Remark = remark
@DstAddress = dstaddress
@OperationTime = operationtime
end
def deserialize(params)
@Description = params['Description']
@Solution = params['Solution']
@Remark = params['Remark']
@DstAddress = params['DstAddress']
@OperationTime = params['OperationTime']
end
end
# 容器安全运行时高危系统调用信息
class ReverseShellEventInfo < TencentCloud::Common::AbstractModel
# @param ProcessName: 进程名称
# @type ProcessName: String
# @param ProcessPath: 进程路径
# @type ProcessPath: String
# @param ImageId: 镜像id
# @type ImageId: String
# @param ContainerId: 容器id
# @type ContainerId: String
# @param ImageName: 镜像名
# @type ImageName: String
# @param ContainerName: 容器名
# @type ContainerName: String
# @param FoundTime: 生成时间
# @type FoundTime: String
# @param Solution: 事件解决方案
# @type Solution: String
# @param Description: 事件详细描述
# @type Description: String
# @param Status: 状态，EVENT_UNDEAL:事件未处理
# EVENT_DEALED:事件已经处理
# EVENT_INGNORE：事件已经忽略
# EVENT_ADD_WHITE：时间已经加白
# @type Status: String
# @param EventId: 事件id
# @type EventId: String
# @param Remark: 备注
# @type Remark: String
# @param PProcessName: 父进程名
# @type PProcessName: String
# @param EventCount: 事件数量
# @type EventCount: Integer
# @param LatestFoundTime: 最近生成时间
# @type LatestFoundTime: String
# @param DstAddress: 目标地址
# @type DstAddress: String
attr_accessor :ProcessName, :ProcessPath, :ImageId, :ContainerId, :ImageName, :ContainerName, :FoundTime, :Solution, :Description, :Status, :EventId, :Remark, :PProcessName, :EventCount, :LatestFoundTime, :DstAddress
def initialize(processname=nil, processpath=nil, imageid=nil, containerid=nil, imagename=nil, containername=nil, foundtime=nil, solution=nil, description=nil, status=nil, eventid=nil, remark=nil, pprocessname=nil, eventcount=nil, latestfoundtime=nil, dstaddress=nil)
@ProcessName = processname
@ProcessPath = processpath
@ImageId = imageid
@ContainerId = containerid
@ImageName = imagename
@ContainerName = containername
@FoundTime = foundtime
@Solution = solution
@Description = description
@Status = status
@EventId = eventid
@Remark = remark
@PProcessName = pprocessname
@EventCount = eventcount
@LatestFoundTime = latestfoundtime
@DstAddress = dstaddress
end
def deserialize(params)
@ProcessName = params['ProcessName']
@ProcessPath = params['ProcessPath']
@ImageId = params['ImageId']
@ContainerId = params['ContainerId']
@ImageName = params['ImageName']
@ContainerName = params['ContainerName']
@FoundTime = params['FoundTime']
@Solution = params['Solution']
@Description = params['Description']
@Status = params['Status']
@EventId = params['EventId']
@Remark = params['Remark']
@PProcessName = params['PProcessName']
@EventCount = params['EventCount']
@LatestFoundTime = params['LatestFoundTime']
@DstAddress = params['DstAddress']
end
end
# 反弹shell白名单信息
class ReverseShellWhiteListBaseInfo < TencentCloud::Common::AbstractModel
# @param Id: 白名单id
# @type Id: String
# @param ImageCount: 镜像数量
# @type ImageCount: Integer
# @param ProcessName: 连接进程名字
# @type ProcessName: String
# @param DstIp: 目标地址ip
# @type DstIp: String
# @param CreateTime: 创建时间
# @type CreateTime: String
# @param UpdateTime: 更新时间
# @type UpdateTime: String
# @param DstPort: 目标端口
# @type DstPort: String
# @param IsGlobal: 是否是全局白名单，true全局
# @type IsGlobal: Boolean
# @param ImageIds: 镜像id数组，为空代表全部
# @type ImageIds: Array
attr_accessor :Id, :ImageCount, :ProcessName, :DstIp, :CreateTime, :UpdateTime, :DstPort, :IsGlobal, :ImageIds
def initialize(id=nil, imagecount=nil, processname=nil, dstip=nil, createtime=nil, updatetime=nil, dstport=nil, isglobal=nil, imageids=nil)
@Id = id
@ImageCount = imagecount
@ProcessName = processname
@DstIp = dstip
@CreateTime = createtime
@UpdateTime = updatetime
@DstPort = dstport
@IsGlobal = isglobal
@ImageIds = imageids
end
def deserialize(params)
@Id = params['Id']
@ImageCount = params['ImageCount']
@ProcessName = params['ProcessName']
@DstIp = params['DstIp']
@CreateTime = params['CreateTime']
@UpdateTime = params['UpdateTime']
@DstPort = params['DstPort']
@IsGlobal = params['IsGlobal']
@ImageIds = params['ImageIds']
end
end
# 反弹shell白名单信息
class ReverseShellWhiteListInfo < TencentCloud::Common::AbstractModel
# @param DstIp: 目标IP
# @type DstIp: String
# @param DstPort: 目标端口
# @type DstPort: String
# @param ProcessName: 目标进程
# @type ProcessName: String
# @param ImageIds: 镜像id数组，为空代表全部
# @type ImageIds: Array
# @param Id: 白名单id，如果新建则id为空
# @type Id: String
attr_accessor :DstIp, :DstPort, :ProcessName, :ImageIds, :Id
def initialize(dstip=nil, dstport=nil, processname=nil, imageids=nil, id=nil)
@DstIp = dstip
@DstPort = dstport
@ProcessName = processname
@ImageIds = imageids
@Id = id
end
def deserialize(params)
@DstIp = params['DstIp']
@DstPort = params['DstPort']
@ProcessName = params['ProcessName']
@ImageIds = params['ImageIds']
@Id = params['Id']
end
end
# 运行时容器高危系统调用事件描述信息
class RiskSyscallEventDescription < TencentCloud::Common::AbstractModel
# @param Description: 描述信息
# @type Description: String
# @param Solution: 解决方案
# @type Solution: String
# @param Remark: 事件备注信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Remark: String
# @param SyscallName: 系统调用名称
# @type SyscallName: String
# @param OperationTime: 事件最后一次处理的时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type OperationTime: String
attr_accessor :Description, :Solution, :Remark, :SyscallName, :OperationTime
def initialize(description=nil, solution=nil, remark=nil, syscallname=nil, operationtime=nil)
@Description = description
@Solution = solution
@Remark = remark
@SyscallName = syscallname
@OperationTime = operationtime
end
def deserialize(params)
@Description = params['Description']
@Solution = params['Solution']
@Remark = params['Remark']
@SyscallName = params['SyscallName']
@OperationTime = params['OperationTime']
end
end
# 容器安全运行时高危系统调用信息
class RiskSyscallEventInfo < TencentCloud::Common::AbstractModel
# @param ProcessName: 进程名称
# @type ProcessName: String
# @param ProcessPath: 进程路径
# @type ProcessPath: String
# @param ImageId: 镜像id
# @type ImageId: String
# @param ContainerId: 容器id
# @type ContainerId: String
# @param ImageName: 镜像名
# @type ImageName: String
# @param ContainerName: 容器名
# @type ContainerName: String
# @param FoundTime: 生成时间
# @type FoundTime: String
# @param Solution: 事件解决方案
# @type Solution: String
# @param Description: 事件详细描述
# @type Description: String
# @param SyscallName: 系统调用名称
# @type SyscallName: String
# @param Status: 状态，EVENT_UNDEAL:事件未处理
# EVENT_DEALED:事件已经处理
# EVENT_INGNORE：事件已经忽略
# EVENT_ADD_WHITE：时间已经加白
# @type Status: String
# @param EventId: 事件id
# @type EventId: String
# @param NodeName: 节点名称
# @type NodeName: String
# @param PodName: pod(实例)的名字
# @type PodName: String
# @param Remark: 备注
# @type Remark: String
# @param RuleExist: 系统监控名称是否存在
# @type RuleExist: Boolean
# @param EventCount: 事件数量
# @type EventCount: Integer
# @param LatestFoundTime: 最近生成时间
# @type LatestFoundTime: String
attr_accessor :ProcessName, :ProcessPath, :ImageId, :ContainerId, :ImageName, :ContainerName, :FoundTime, :Solution, :Description, :SyscallName, :Status, :EventId, :NodeName, :PodName, :Remark, :RuleExist, :EventCount, :LatestFoundTime
def initialize(processname=nil, processpath=nil, imageid=nil, containerid=nil, imagename=nil, containername=nil, foundtime=nil, solution=nil, description=nil, syscallname=nil, status=nil, eventid=nil, nodename=nil, podname=nil, remark=nil, ruleexist=nil, eventcount=nil, latestfoundtime=nil)
@ProcessName = processname
@ProcessPath = processpath
@ImageId = imageid
@ContainerId = containerid
@ImageName = imagename
@ContainerName = containername
@FoundTime = foundtime
@Solution = solution
@Description = description
@SyscallName = syscallname
@Status = status
@EventId = eventid
@NodeName = nodename
@PodName = podname
@Remark = remark
@RuleExist = ruleexist
@EventCount = eventcount
@LatestFoundTime = latestfoundtime
end
def deserialize(params)
@ProcessName = params['ProcessName']
@ProcessPath = params['ProcessPath']
@ImageId = params['ImageId']
@ContainerId = params['ContainerId']
@ImageName = params['ImageName']
@ContainerName = params['ContainerName']
@FoundTime = params['FoundTime']
@Solution = params['Solution']
@Description = params['Description']
@SyscallName = params['SyscallName']
@Status = params['Status']
@EventId = params['EventId']
@NodeName = params['NodeName']
@PodName = params['PodName']
@Remark = params['Remark']
@RuleExist = params['RuleExist']
@EventCount = params['EventCount']
@LatestFoundTime = params['LatestFoundTime']
end
end
# 高危系统调用白名单信息
class RiskSyscallWhiteListBaseInfo < TencentCloud::Common::AbstractModel
# @param Id: 白名单id
# @type Id: String
# @param ImageCount: 镜像数量
# @type ImageCount: Integer
# @param ProcessPath: 连接进程路径
# @type ProcessPath: String
# @param SyscallNames: 系统调用名称列表
# @type SyscallNames: Array
# @param CreateTime: 创建时间
# @type CreateTime: String
# @param UpdateTime: 更新时间
# @type UpdateTime: String
# @param IsGlobal: 是否是全局白名单，true全局
# @type IsGlobal: Boolean
# @param ImageIds: 镜像id数组
# @type ImageIds: Array
attr_accessor :Id, :ImageCount, :ProcessPath, :SyscallNames, :CreateTime, :UpdateTime, :IsGlobal, :ImageIds
def initialize(id=nil, imagecount=nil, processpath=nil, syscallnames=nil, createtime=nil, updatetime=nil, isglobal=nil, imageids=nil)
@Id = id
@ImageCount = imagecount
@ProcessPath = processpath
@SyscallNames = syscallnames
@CreateTime = createtime
@UpdateTime = updatetime
@IsGlobal = isglobal
@ImageIds = imageids
end
def deserialize(params)
@Id = params['Id']
@ImageCount = params['ImageCount']
@ProcessPath = params['ProcessPath']
@SyscallNames = params['SyscallNames']
@CreateTime = params['CreateTime']
@UpdateTime = params['UpdateTime']
@IsGlobal = params['IsGlobal']
@ImageIds = params['ImageIds']
end
end
# 高危系统调用白名单信息
class RiskSyscallWhiteListInfo < TencentCloud::Common::AbstractModel
# @param ImageIds: 镜像id数组，为空代表全部
# @type ImageIds: Array
# @param SyscallNames: 系统调用名称，通过DescribeRiskSyscallNames接口获取枚举列表
# @type SyscallNames: Array
# @param ProcessPath: 目标进程
# @type ProcessPath: String
# @param Id: 白名单id，如果新建则id为空
# @type Id: String
attr_accessor :ImageIds, :SyscallNames, :ProcessPath, :Id
def initialize(imageids=nil, syscallnames=nil, processpath=nil, id=nil)
@ImageIds = imageids
@SyscallNames = syscallnames
@ProcessPath = processpath
@Id = id
end
def deserialize(params)
@ImageIds = params['ImageIds']
@SyscallNames = params['SyscallNames']
@ProcessPath = params['ProcessPath']
@Id = params['Id']
end
end
# 运行时安全，策略基本信息
class RuleBaseInfo < TencentCloud::Common::AbstractModel
# @param IsDefault: true: 默认策略，false:自定义策略
# @type IsDefault: Boolean
# @param EffectImageCount: 策略生效镜像数量
# @type EffectImageCount: Integer
# @param RuleId: 策略Id
# @type RuleId: String
# @param UpdateTime: 策略更新时间, 存在为空的情况
# 注意：此字段可能返回 null，表示取不到有效值。
# @type UpdateTime: String
# @param RuleName: 策略名字
# @type RuleName: String
# @param EditUserName: 编辑用户名称
# @type EditUserName: String
# @param IsEnable: true: 策略启用，false：策略禁用
# @type IsEnable: Boolean
attr_accessor :IsDefault, :EffectImageCount, :RuleId, :UpdateTime, :RuleName, :EditUserName, :IsEnable
def initialize(isdefault=nil, effectimagecount=nil, ruleid=nil, updatetime=nil, rulename=nil, editusername=nil, isenable=nil)
@IsDefault = isdefault
@EffectImageCount = effectimagecount
@RuleId = ruleid
@UpdateTime = updatetime
@RuleName = rulename
@EditUserName = editusername
@IsEnable = isenable
end
def deserialize(params)
@IsDefault = params['IsDefault']
@EffectImageCount = params['EffectImageCount']
@RuleId = params['RuleId']
@UpdateTime = params['UpdateTime']
@RuleName = params['RuleName']
@EditUserName = params['EditUserName']
@IsEnable = params['IsEnable']
end
end
# 运行时安全事件基本信息
class RunTimeEventBaseInfo < TencentCloud::Common::AbstractModel
# @param EventId: 事件唯一ID
# @type EventId: String
# @param FoundTime: 事件发现时间
# @type FoundTime: String
# @param ContainerId: 容器id
# @type ContainerId: String
# @param ContainerName: 容器名称
# @type ContainerName: String
# @param ImageId: 镜像id
# @type ImageId: String
# @param ImageName: 镜像名称
# @type ImageName: String
# @param NodeName: 节点名称
# @type NodeName: String
# @param PodName: Pod名称
# @type PodName: String
# @param Status: 状态， “EVENT_UNDEAL”:事件未处理
# "EVENT_DEALED":事件已经处理
# "EVENT_INGNORE"：事件已经忽略
# @type Status: String
# @param EventName: 事件名称：
# 宿主机文件访问逃逸、
# Syscall逃逸、
# MountNamespace逃逸、
# 程序提权逃逸、
# 特权容器启动逃逸、
# 敏感路径挂载
# 恶意进程启动
# 文件篡改
# @type EventName: String
# @param EventType: 事件类型
# ESCAPE_HOST_ACESS_FILE:宿主机文件访问逃逸
# ESCAPE_MOUNT_NAMESPACE:MountNamespace逃逸
# ESCAPE_PRIVILEDGE:程序提权逃逸
# ESCAPE_PRIVILEDGE_CONTAINER_START:特权容器启动逃逸
# ESCAPE_MOUNT_SENSITIVE_PTAH:敏感路径挂载
# ESCAPE_SYSCALL:Syscall逃逸
# @type EventType: String
# @param EventCount: 事件数量
# @type EventCount: Integer
# @param LatestFoundTime: 最近生成时间
# @type LatestFoundTime: String
# @param HostIP: 内网ip
# 注意：此字段可能返回 null，表示取不到有效值。
# @type HostIP: String
# @param ClientIP: 外网ip
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ClientIP: String
# @param ContainerNetStatus: 网络状态
# 未隔离 NORMAL
# 已隔离 ISOLATED
# 隔离中 ISOLATING
# 隔离失败 ISOLATE_FAILED
# 解除隔离中 RESTORING
# 解除隔离失败 RESTORE_FAILED
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ContainerNetStatus: String
# @param ContainerNetSubStatus: 容器子状态
# "AGENT_OFFLINE" //Agent离线
# "NODE_DESTROYED" //节点已销毁
# "CONTAINER_EXITED" //容器已退出
# "CONTAINER_DESTROYED" //容器已销毁
# "SHARED_HOST" // 容器与主机共享网络
# "RESOURCE_LIMIT" //隔离操作资源超限
# "UNKNOW" // 原因未知
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ContainerNetSubStatus: String
# @param ContainerIsolateOperationSrc: 容器隔离操作来源
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ContainerIsolateOperationSrc: String
attr_accessor :EventId, :FoundTime, :ContainerId, :ContainerName, :ImageId, :ImageName, :NodeName, :PodName, :Status, :EventName, :EventType, :EventCount, :LatestFoundTime, :HostIP, :ClientIP, :ContainerNetStatus, :ContainerNetSubStatus, :ContainerIsolateOperationSrc
def initialize(eventid=nil, foundtime=nil, containerid=nil, containername=nil, imageid=nil, imagename=nil, nodename=nil, podname=nil, status=nil, eventname=nil, eventtype=nil, eventcount=nil, latestfoundtime=nil, hostip=nil, clientip=nil, containernetstatus=nil, containernetsubstatus=nil, containerisolateoperationsrc=nil)
@EventId = eventid
@FoundTime = foundtime
@ContainerId = containerid
@ContainerName = containername
@ImageId = imageid
@ImageName = imagename
@NodeName = nodename
@PodName = podname
@Status = status
@EventName = eventname
@EventType = eventtype
@EventCount = eventcount
@LatestFoundTime = latestfoundtime
@HostIP = hostip
@ClientIP = clientip
@ContainerNetStatus = containernetstatus
@ContainerNetSubStatus = containernetsubstatus
@ContainerIsolateOperationSrc = containerisolateoperationsrc
end
def deserialize(params)
@EventId = params['EventId']
@FoundTime = params['FoundTime']
@ContainerId = params['ContainerId']
@ContainerName = params['ContainerName']
@ImageId = params['ImageId']
@ImageName = params['ImageName']
@NodeName = params['NodeName']
@PodName = params['PodName']
@Status = params['Status']
@EventName = params['EventName']
@EventType = params['EventType']
@EventCount = params['EventCount']
@LatestFoundTime = params['LatestFoundTime']
@HostIP = params['HostIP']
@ClientIP = params['ClientIP']
@ContainerNetStatus = params['ContainerNetStatus']
@ContainerNetSubStatus = params['ContainerNetSubStatus']
@ContainerIsolateOperationSrc = params['ContainerIsolateOperationSrc']
end
end
# 容器安全
# 描述键值对过滤器，用于条件过滤查询。例如过滤ID、名称、状态等
# 若存在多个Filter时，Filter间的关系为逻辑与（AND）关系。
# 若同一个Filter存在多个Values，同一Filter下Values间的关系为逻辑或（OR）关系。
class RunTimeFilters < TencentCloud::Common::AbstractModel
# @param Name: 过滤键的名称
# @type Name: String
# @param Values: 一个或者多个过滤值。
# @type Values: Array
# @param ExactMatch: 是否模糊查询
# @type ExactMatch: Boolean
attr_accessor :Name, :Values, :ExactMatch
def initialize(name=nil, values=nil, exactmatch=nil)
@Name = name
@Values = values
@ExactMatch = exactmatch
end
def deserialize(params)
@Name = params['Name']
@Values = params['Values']
@ExactMatch = params['ExactMatch']
end
end
# 运行时风险信息
class RunTimeRiskInfo < TencentCloud::Common::AbstractModel
# @param Cnt: 数量
# @type Cnt: Integer
# @param Level: 风险等级：
# CRITICAL: 严重
# HIGH: 高
# MEDIUM：中
# LOW: 低
# @type Level: String
attr_accessor :Cnt, :Level
def initialize(cnt=nil, level=nil)
@Cnt = cnt
@Level = level
end
def deserialize(params)
@Cnt = params['Cnt']
@Level = params['Level']
end
end
# 运行时趋势信息
class RunTimeTendencyInfo < TencentCloud::Common::AbstractModel
# @param CurTime: 当天时间
# @type CurTime: String
# @param Cnt: 当前数量
# @type Cnt: Integer
attr_accessor :CurTime, :Cnt
def initialize(curtime=nil, cnt=nil)
@CurTime = curtime
@Cnt = cnt
end
def deserialize(params)
@CurTime = params['CurTime']
@Cnt = params['Cnt']
end
end
# ScanComplianceAssetsByPolicyItem请求参数结构体
class ScanComplianceAssetsByPolicyItemRequest < TencentCloud::Common::AbstractModel
# @param CustomerPolicyItemId: 指定的检测项的ID
# @type CustomerPolicyItemId: Integer
# @param CustomerAssetIdSet: 要重新扫描的客户资产项ID的列表。
# @type CustomerAssetIdSet: Array
attr_accessor :CustomerPolicyItemId, :CustomerAssetIdSet
def initialize(customerpolicyitemid=nil, customerassetidset=nil)
@CustomerPolicyItemId = customerpolicyitemid
@CustomerAssetIdSet = customerassetidset
end
def deserialize(params)
@CustomerPolicyItemId = params['CustomerPolicyItemId']
@CustomerAssetIdSet = params['CustomerAssetIdSet']
end
end
# ScanComplianceAssetsByPolicyItem返回参数结构体
class ScanComplianceAssetsByPolicyItemResponse < TencentCloud::Common::AbstractModel
# @param TaskId: 返回重新检测任务的ID。
# @type TaskId: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TaskId, :RequestId
def initialize(taskid=nil, requestid=nil)
@TaskId = taskid
@RequestId = requestid
end
def deserialize(params)
@TaskId = params['TaskId']
@RequestId = params['RequestId']
end
end
# ScanComplianceAssets请求参数结构体
class ScanComplianceAssetsRequest < TencentCloud::Common::AbstractModel
# @param CustomerAssetIdSet: 要重新扫描的客户资产项ID的列表。
# @type CustomerAssetIdSet: Array
attr_accessor :CustomerAssetIdSet
def initialize(customerassetidset=nil)
@CustomerAssetIdSet = customerassetidset
end
def deserialize(params)
@CustomerAssetIdSet = params['CustomerAssetIdSet']
end
end
# ScanComplianceAssets返回参数结构体
class ScanComplianceAssetsResponse < TencentCloud::Common::AbstractModel
# @param TaskId: 返回重新检测任务的ID。
# @type TaskId: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TaskId, :RequestId
def initialize(taskid=nil, requestid=nil)
@TaskId = taskid
@RequestId = requestid
end
def deserialize(params)
@TaskId = params['TaskId']
@RequestId = params['RequestId']
end
end
# ScanCompliancePolicyItems请求参数结构体
class ScanCompliancePolicyItemsRequest < TencentCloud::Common::AbstractModel
# @param CustomerPolicyItemIdSet: 要重新扫描的客户检测项的列表。
# @type CustomerPolicyItemIdSet: Array
attr_accessor :CustomerPolicyItemIdSet
def initialize(customerpolicyitemidset=nil)
@CustomerPolicyItemIdSet = customerpolicyitemidset
end
def deserialize(params)
@CustomerPolicyItemIdSet = params['CustomerPolicyItemIdSet']
end
end
# ScanCompliancePolicyItems返回参数结构体
class ScanCompliancePolicyItemsResponse < TencentCloud::Common::AbstractModel
# @param TaskId: 返回重新检测任务的ID。
# @type TaskId: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TaskId, :RequestId
def initialize(taskid=nil, requestid=nil)
@TaskId = taskid
@RequestId = requestid
end
def deserialize(params)
@TaskId = params['TaskId']
@RequestId = params['RequestId']
end
end
# ScanComplianceScanFailedAssets请求参数结构体
class ScanComplianceScanFailedAssetsRequest < TencentCloud::Common::AbstractModel
# @param CustomerAssetIdSet: 要重新扫描的客户资产项ID的列表。
# @type CustomerAssetIdSet: Array
attr_accessor :CustomerAssetIdSet
def initialize(customerassetidset=nil)
@CustomerAssetIdSet = customerassetidset
end
def deserialize(params)
@CustomerAssetIdSet = params['CustomerAssetIdSet']
end
end
# ScanComplianceScanFailedAssets返回参数结构体
class ScanComplianceScanFailedAssetsResponse < TencentCloud::Common::AbstractModel
# @param TaskId: 返回重新检测任务的ID。
# @type TaskId: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :TaskId, :RequestId
def initialize(taskid=nil, requestid=nil)
@TaskId = taskid
@RequestId = requestid
end
def deserialize(params)
@TaskId = params['TaskId']
@RequestId = params['RequestId']
end
end
# 运行时安全事件趋势信息
class SecTendencyEventInfo < TencentCloud::Common::AbstractModel
# @param EventSet: 趋势列表
# @type EventSet: Array
# @param EventType: 事件类型：
# ET_ESCAPE : 容器逃逸
# ET_REVERSE_SHELL: 反弹shell
# ET_RISK_SYSCALL:高危系统调用
# ET_ABNORMAL_PROCESS: 异常进程
# ET_ACCESS_CONTROL 文件篡改
# @type EventType: String
attr_accessor :EventSet, :EventType
def initialize(eventset=nil, eventtype=nil)
@EventSet = eventset
@EventType = eventtype
end
def deserialize(params)
unless params['EventSet'].nil?
@EventSet = []
params['EventSet'].each do |i|
runtimetendencyinfo_tmp = RunTimeTendencyInfo.new
runtimetendencyinfo_tmp.deserialize(i)
@EventSet << runtimetendencyinfo_tmp
end
end
@EventType = params['EventType']
end
end
# 容器安全服务信息列表
class ServiceInfo < TencentCloud::Common::AbstractModel
# @param ServiceID: 服务id
# @type ServiceID: String
# @param HostID: 主机id
# @type HostID: String
# @param HostIP: 主机ip
# @type HostIP: String
# @param ContainerName: 容器名
# @type ContainerName: String
# @param Type: 服务名 例如nginx/redis
# @type Type: String
# @param Version: 版本
# @type Version: String
# @param RunAs: 账号
# @type RunAs: String
# @param Listen: 监听端口
# @type Listen: Array
# @param Config: 配置
# @type Config: String
# @param ProcessCnt: 关联进程数
# @type ProcessCnt: Integer
# @param AccessLog: 访问日志
# @type AccessLog: String
# @param ErrorLog: 错误日志
# @type ErrorLog: String
# @param DataPath: 数据目录
# @type DataPath: String
# @param WebRoot: web目录
# @type WebRoot: String
# @param Pids: 关联的进程id
# @type Pids: Array
# @param MainType: 服务类型 app,web,db
# @type MainType: String
# @param Exe: 执行文件
# @type Exe: String
# @param Parameter: 服务命令行参数
# @type Parameter: String
# @param ContainerId: 容器id
# @type ContainerId: String
# @param HostName: 主机名称
# @type HostName: String
# @param PublicIp: 外网ip
# @type PublicIp: String
attr_accessor :ServiceID, :HostID, :HostIP, :ContainerName, :Type, :Version, :RunAs, :Listen, :Config, :ProcessCnt, :AccessLog, :ErrorLog, :DataPath, :WebRoot, :Pids, :MainType, :Exe, :Parameter, :ContainerId, :HostName, :PublicIp
def initialize(serviceid=nil, hostid=nil, hostip=nil, containername=nil, type=nil, version=nil, runas=nil, listen=nil, config=nil, processcnt=nil, accesslog=nil, errorlog=nil, datapath=nil, webroot=nil, pids=nil, maintype=nil, exe=nil, parameter=nil, containerid=nil, hostname=nil, publicip=nil)
@ServiceID = serviceid
@HostID = hostid
@HostIP = hostip
@ContainerName = containername
@Type = type
@Version = version
@RunAs = runas
@Listen = listen
@Config = config
@ProcessCnt = processcnt
@AccessLog = accesslog
@ErrorLog = errorlog
@DataPath = datapath
@WebRoot = webroot
@Pids = pids
@MainType = maintype
@Exe = exe
@Parameter = parameter
@ContainerId = containerid
@HostName = hostname
@PublicIp = publicip
end
def deserialize(params)
@ServiceID = params['ServiceID']
@HostID = params['HostID']
@HostIP = params['HostIP']
@ContainerName = params['ContainerName']
@Type = params['Type']
@Version = params['Version']
@RunAs = params['RunAs']
@Listen = params['Listen']
@Config = params['Config']
@ProcessCnt = params['ProcessCnt']
@AccessLog = params['AccessLog']
@ErrorLog = params['ErrorLog']
@DataPath = params['DataPath']
@WebRoot = params['WebRoot']
@Pids = params['Pids']
@MainType = params['MainType']
@Exe = params['Exe']
@Parameter = params['Parameter']
@ContainerId = params['ContainerId']
@HostName = params['HostName']
@PublicIp = params['PublicIp']
end
end
# SetCheckMode请求参数结构体
class SetCheckModeRequest < TencentCloud::Common::AbstractModel
# @param ClusterIds: 要设置的集群ID列表
# @type ClusterIds: Array
# @param ClusterCheckMode: 集群检查模式(正常模式"Cluster_Normal"、主动模式"Cluster_Actived"、不设置"Cluster_Unset")
# @type ClusterCheckMode: String
# @param ClusterAutoCheck: 0不设置 1打开 2关闭
# @type ClusterAutoCheck: Integer
attr_accessor :ClusterIds, :ClusterCheckMode, :ClusterAutoCheck
def initialize(clusterids=nil, clustercheckmode=nil, clusterautocheck=nil)
@ClusterIds = clusterids
@ClusterCheckMode = clustercheckmode
@ClusterAutoCheck = clusterautocheck
end
def deserialize(params)
@ClusterIds = params['ClusterIds']
@ClusterCheckMode = params['ClusterCheckMode']
@ClusterAutoCheck = params['ClusterAutoCheck']
end
end
# SetCheckMode返回参数结构体
class SetCheckModeResponse < TencentCloud::Common::AbstractModel
# @param SetCheckResult: "Succ"表示设置成功，"Failed"表示设置失败
# @type SetCheckResult: String
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :SetCheckResult, :RequestId
def initialize(setcheckresult=nil, requestid=nil)
@SetCheckResult = setcheckresult
@RequestId = requestid
end
def deserialize(params)
@SetCheckResult = params['SetCheckResult']
@RequestId = params['RequestId']
end
end
# 后付费详情
class SoftQuotaDayInfo < TencentCloud::Common::AbstractModel
# @param PayTime: 扣费时间
# @type PayTime: String
# @param CoresCnt: 计费核数
# @type CoresCnt: Integer
attr_accessor :PayTime, :CoresCnt
def initialize(paytime=nil, corescnt=nil)
@PayTime = paytime
@CoresCnt = corescnt
end
def deserialize(params)
@PayTime = params['PayTime']
@CoresCnt = params['CoresCnt']
end
end
# StopVirusScanTask请求参数结构体
class StopVirusScanTaskRequest < TencentCloud::Common::AbstractModel
# @param TaskId: 任务ID
# @type TaskId: String
# @param ContainerIds: 需要停止的容器id 为空默认停止整个任务
# @type ContainerIds: Array
attr_accessor :TaskId, :ContainerIds
def initialize(taskid=nil, containerids=nil)
@TaskId = taskid
@ContainerIds = containerids
end
def deserialize(params)
@TaskId = params['TaskId']
@ContainerIds = params['ContainerIds']
end
end
# StopVirusScanTask返回参数结构体
class StopVirusScanTaskResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# SyncAssetImageRegistryAsset请求参数结构体
class SyncAssetImageRegistryAssetRequest < TencentCloud::Common::AbstractModel
def initialize()
end
def deserialize(params)
end
end
# SyncAssetImageRegistryAsset返回参数结构体
class SyncAssetImageRegistryAssetResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# UpdateAssetImageRegistryRegistryDetail请求参数结构体
class UpdateAssetImageRegistryRegistryDetailRequest < TencentCloud::Common::AbstractModel
# @param Name: 仓库名
# @type Name: String
# @param Username: 用户名
# @type Username: String
# @param Password: 密码
# @type Password: String
# @param Url: 仓库url
# @type Url: String
# @param RegistryType: 仓库类型，列表：harbor
# @type RegistryType: String
# @param NetType: 网络类型，列表：public（公网）
# @type NetType: String
# @param RegistryVersion: 仓库版本
# @type RegistryVersion: String
# @param RegistryRegion: 区域，列表：default（默认）
# @type RegistryRegion: String
# @param SpeedLimit: 限速
# @type SpeedLimit: Integer
# @param Insecure: 安全模式（证书校验）：0（默认） 非安全模式（跳过证书校验）：1
# @type Insecure: Integer
attr_accessor :Name, :Username, :Password, :Url, :RegistryType, :NetType, :RegistryVersion, :RegistryRegion, :SpeedLimit, :Insecure
def initialize(name=nil, username=nil, password=nil, url=nil, registrytype=nil, nettype=nil, registryversion=nil, registryregion=nil, speedlimit=nil, insecure=nil)
@Name = name
@Username = username
@Password = password
@Url = url
@RegistryType = registrytype
@NetType = nettype
@RegistryVersion = registryversion
@RegistryRegion = registryregion
@SpeedLimit = speedlimit
@Insecure = insecure
end
def deserialize(params)
@Name = params['Name']
@Username = params['Username']
@Password = params['Password']
@Url = params['Url']
@RegistryType = params['RegistryType']
@NetType = params['NetType']
@RegistryVersion = params['RegistryVersion']
@RegistryRegion = params['RegistryRegion']
@SpeedLimit = params['SpeedLimit']
@Insecure = params['Insecure']
end
end
# UpdateAssetImageRegistryRegistryDetail返回参数结构体
class UpdateAssetImageRegistryRegistryDetailResponse < TencentCloud::Common::AbstractModel
# @param HealthCheckErr: 连接错误信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type HealthCheckErr: String
# @param NameRepeatErr: 名称错误信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type NameRepeatErr: String
# @param RegistryId: 仓库唯一id
# 注意：此字段可能返回 null，表示取不到有效值。
# @type RegistryId: Integer
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :HealthCheckErr, :NameRepeatErr, :RegistryId, :RequestId
def initialize(healthcheckerr=nil, namerepeaterr=nil, registryid=nil, requestid=nil)
@HealthCheckErr = healthcheckerr
@NameRepeatErr = namerepeaterr
@RegistryId = registryid
@RequestId = requestid
end
def deserialize(params)
@HealthCheckErr = params['HealthCheckErr']
@NameRepeatErr = params['NameRepeatErr']
@RegistryId = params['RegistryId']
@RequestId = params['RequestId']
end
end
# UpdateImageRegistryTimingScanTask请求参数结构体
class UpdateImageRegistryTimingScanTaskRequest < TencentCloud::Common::AbstractModel
# @param ScanPeriod: 定时扫描周期
# @type ScanPeriod: Integer
# @param Enable: 定时扫描开关
# @type Enable: Boolean
# @param ScanTime: 定时扫描的时间
# @type ScanTime: String
# @param ScanType: 扫描木马类型数组
# @type ScanType: Array
# @param Images: 扫描镜像
# @type Images: Array
# @param All: 是否扫描所有
# @type All: Boolean
# @param Id: 扫描镜像Id
# @type Id: Array
attr_accessor :ScanPeriod, :Enable, :ScanTime, :ScanType, :Images, :All, :Id
def initialize(scanperiod=nil, enable=nil, scantime=nil, scantype=nil, images=nil, all=nil, id=nil)
@ScanPeriod = scanperiod
@Enable = enable
@ScanTime = scantime
@ScanType = scantype
@Images = images
@All = all
@Id = id
end
def deserialize(params)
@ScanPeriod = params['ScanPeriod']
@Enable = params['Enable']
@ScanTime = params['ScanTime']
@ScanType = params['ScanType']
unless params['Images'].nil?
@Images = []
params['Images'].each do |i|
imageinfo_tmp = ImageInfo.new
imageinfo_tmp.deserialize(i)
@Images << imageinfo_tmp
end
end
@All = params['All']
@Id = params['Id']
end
end
# UpdateImageRegistryTimingScanTask返回参数结构体
class UpdateImageRegistryTimingScanTaskResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，每次请求都会返回。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# 运行时木马列表信息
class VirusInfo < TencentCloud::Common::AbstractModel
# @param FileName: 文件名称
# @type FileName: String
# @param FilePath: 文件路径
# @type FilePath: String
# @param VirusName: 病毒名称
# @type VirusName: String
# @param CreateTime: 创建时间
# @type CreateTime: String
# @param ModifyTime: 更新时间
# @type ModifyTime: String
# @param ContainerName: 容器名称
# @type ContainerName: String
# @param ContainerId: 容器id
# @type ContainerId: String
# @param ContainerStatus: 容器状态，CS_RUNING:运行， CS_PAUSE:暂停，CS_STOP:停止，
# CS_CREATE:已经创建， CS_DESTORY:销毁
# @type ContainerStatus: String
# @param ImageName: 镜像名称
# @type ImageName: String
# @param ImageId: 镜像id
# @type ImageId: String
# @param Status: DEAL_NONE:文件待处理
# DEAL_IGNORE:已经忽略
# DEAL_ADD_WHITELIST:加白
# DEAL_DEL:文件已经删除
# DEAL_ISOLATE:已经隔离
# DEAL_ISOLATING:隔离中
# DEAL_ISOLATE_FAILED:隔离失败
# DEAL_RECOVERING:恢复中
# DEAL_RECOVER_FAILED: 恢复失败
# @type Status: String
# @param Id: 事件id
# @type Id: String
# @param HarmDescribe: 事件描述
# @type HarmDescribe: String
# @param SuggestScheme: 建议方案
# @type SuggestScheme: String
# @param SubStatus: 失败子状态:
# FILE_NOT_FOUND:文件不存在
# FILE_ABNORMAL:文件异常
# FILE_ABNORMAL_DEAL_RECOVER:恢复文件时，文件异常
# BACKUP_FILE_NOT_FOUND:备份文件不存在
# CONTAINER_NOT_FOUND_DEAL_ISOLATE:隔离时，容器不存在
# CONTAINER_NOT_FOUND_DEAL_RECOVER:恢复时，容器不存在
# TIMEOUT: 超时
# TOO_MANY: 任务过多
# OFFLINE: 离线
# INTERNAL: 服务内部错误
# VALIDATION: 参数非法
# @type SubStatus: String
attr_accessor :FileName, :FilePath, :VirusName, :CreateTime, :ModifyTime, :ContainerName, :ContainerId, :ContainerStatus, :ImageName, :ImageId, :Status, :Id, :HarmDescribe, :SuggestScheme, :SubStatus
def initialize(filename=nil, filepath=nil, virusname=nil, createtime=nil, modifytime=nil, containername=nil, containerid=nil, containerstatus=nil, imagename=nil, imageid=nil, status=nil, id=nil, harmdescribe=nil, suggestscheme=nil, substatus=nil)
@FileName = filename
@FilePath = filepath
@VirusName = virusname
@CreateTime = createtime
@ModifyTime = modifytime
@ContainerName = containername
@ContainerId = containerid
@ContainerStatus = containerstatus
@ImageName = imagename
@ImageId = imageid
@Status = status
@Id = id
@HarmDescribe = harmdescribe
@SuggestScheme = suggestscheme
@SubStatus = substatus
end
def deserialize(params)
@FileName = params['FileName']
@FilePath = params['FilePath']
@VirusName = params['VirusName']
@CreateTime = params['CreateTime']
@ModifyTime = params['ModifyTime']
@ContainerName = params['ContainerName']
@ContainerId = params['ContainerId']
@ContainerStatus = params['ContainerStatus']
@ImageName = params['ImageName']
@ImageId = params['ImageId']
@Status = params['Status']
@Id = params['Id']
@HarmDescribe = params['HarmDescribe']
@SuggestScheme = params['SuggestScheme']
@SubStatus = params['SubStatus']
end
end
# 运行时文件查杀任务容器列表信息
class VirusTaskInfo < TencentCloud::Common::AbstractModel
# @param ContainerName: 容器名称
# @type ContainerName: String
# @param ContainerId: 容器id
# @type ContainerId: String
# @param ImageName: 镜像名称
# @type ImageName: String
# @param ImageId: 镜像Id
# @type ImageId: String
# @param HostName: 主机名称
# @type HostName: String
# @param HostIp: 主机ip
# @type HostIp: String
# @param Status: 扫描状态：
# WAIT: 等待扫描
# FAILED: 失败
# SCANNING: 扫描中
# FINISHED: 结束
# CANCELING: 取消中
# CANCELED: 已取消
# CANCEL_FAILED： 取消失败
# @type Status: String
# @param StartTime: 检测开始时间
# @type StartTime: String
# @param EndTime: 检测结束时间
# @type EndTime: String
# @param RiskCnt: 风险个数
# @type RiskCnt: Integer
# @param Id: 事件id
# @type Id: String
# @param ErrorMsg: 错误原因:
# SEND_SUCCESSED: 下发成功
# SCAN_WAIT: agent排队扫描等待中
# OFFLINE: 离线
# SEND_FAILED:下发失败
# TIMEOUT: 超时
# LOW_AGENT_VERSION: 客户端版本过低
# AGENT_NOT_FOUND: 镜像所属客户端版不存在
# TOO_MANY: 任务过多
# VALIDATION: 参数非法
# INTERNAL: 服务内部错误
# MISC: 其他错误
# UNAUTH: 所在镜像未授权
# SEND_CANCEL_SUCCESSED:下发成功
# @type ErrorMsg: String
attr_accessor :ContainerName, :ContainerId, :ImageName, :ImageId, :HostName, :HostIp, :Status, :StartTime, :EndTime, :RiskCnt, :Id, :ErrorMsg
def initialize(containername=nil, containerid=nil, imagename=nil, imageid=nil, hostname=nil, hostip=nil, status=nil, starttime=nil, endtime=nil, riskcnt=nil, id=nil, errormsg=nil)
@ContainerName = containername
@ContainerId = containerid
@ImageName = imagename
@ImageId = imageid
@HostName = hostname
@HostIp = hostip
@Status = status
@StartTime = starttime
@EndTime = endtime
@RiskCnt = riskcnt
@Id = id
@ErrorMsg = errormsg
end
def deserialize(params)
@ContainerName = params['ContainerName']
@ContainerId = params['ContainerId']
@ImageName = params['ImageName']
@ImageId = params['ImageId']
@HostName = params['HostName']
@HostIp = params['HostIp']
@Status = params['Status']
@StartTime = params['StartTime']
@EndTime = params['EndTime']
@RiskCnt = params['RiskCnt']
@Id = params['Id']
@ErrorMsg = params['ErrorMsg']
end
end
# 告警配置策略
class WarningRule < TencentCloud::Common::AbstractModel
# @param Type: 告警事件类型：
# 镜像仓库安全-木马：IMG_REG_VIRUS
# 镜像仓库安全-漏洞：IMG_REG_VUL
# 镜像仓库安全-敏感信息：IMG_REG_RISK
# 镜像安全-木马：IMG_VIRUS
# 镜像安全-漏洞：IMG_VUL
# 镜像安全-敏感信息：IMG_RISK
# 镜像安全-镜像拦截：IMG_INTERCEPT
# 运行时安全-容器逃逸：RUNTIME_ESCAPE
# 运行时安全-异常进程：RUNTIME_FILE
# 运行时安全-异常文件访问：RUNTIME_PROCESS
# 运行时安全-高危系统调用：RUNTIME_SYSCALL
# 运行时安全-反弹Shell：RUNTIME_REVERSE_SHELL
# 运行时安全-木马：RUNTIME_VIRUS
# @type Type: String
# @param Switch: 开关状态：
# 打开：ON
# 关闭：OFF
# @type Switch: String
# @param BeginTime: 告警开始时间，格式: HH:mm
# @type BeginTime: String
# @param EndTime: 告警结束时间，格式: HH:mm
# @type EndTime: String
# @param ControlBits: 告警等级策略控制，二进制位每位代表一个含义，值以字符串类型传递
# 控制开关分为高、中、低，则二进制位分别为：第1位:低，第2位:中，第3位:高，0表示关闭、1表示打开。
# 如：高危和中危打开告警，低危关闭告警，则二进制值为：110
# 告警类型不区分等级控制，则传1。
# @type ControlBits: String
attr_accessor :Type, :Switch, :BeginTime, :EndTime, :ControlBits
def initialize(type=nil, switch=nil, begintime=nil, endtime=nil, controlbits=nil)
@Type = type
@Switch = switch
@BeginTime = begintime
@EndTime = endtime
@ControlBits = controlbits
end
def deserialize(params)
@Type = params['Type']
@Switch = params['Switch']
@BeginTime = params['BeginTime']
@EndTime = params['EndTime']
@ControlBits = params['ControlBits']
end
end
end
end
end