# frozen_string_literal: true # Copyright (c) 2017-2018 THL A29 Limited, a Tencent company. All Rights Reserved. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. module TencentCloud module Lighthouse module V20200324 # ApplyInstanceSnapshot请求参数结构体 class ApplyInstanceSnapshotRequest < TencentCloud::Common::AbstractModel # @param InstanceId: 实例 ID。 # @type InstanceId: String # @param SnapshotId: 快照 ID。 # @type SnapshotId: String attr_accessor :InstanceId, :SnapshotId def initialize(instanceid=nil, snapshotid=nil) @InstanceId = instanceid @SnapshotId = snapshotid end def deserialize(params) @InstanceId = params['InstanceId'] @SnapshotId = params['SnapshotId'] end end # ApplyInstanceSnapshot返回参数结构体 class ApplyInstanceSnapshotResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # AssociateInstancesKeyPairs请求参数结构体 class AssociateInstancesKeyPairsRequest < TencentCloud::Common::AbstractModel # @param KeyIds: 密钥对 ID 列表。每次请求批量密钥对的上限为 100。 # @type KeyIds: Array # @param InstanceIds: 实例 ID 列表。每次请求批量实例的上限为 100。可通过[DescribeInstances](https://cloud.tencent.com/document/api/1207/47573)接口返回值中的InstanceId获取。 # @type InstanceIds: Array attr_accessor :KeyIds, :InstanceIds def initialize(keyids=nil, instanceids=nil) @KeyIds = keyids @InstanceIds = instanceids end def deserialize(params) @KeyIds = params['KeyIds'] @InstanceIds = params['InstanceIds'] end end # AssociateInstancesKeyPairs返回参数结构体 class AssociateInstancesKeyPairsResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # AttachCcn请求参数结构体 class AttachCcnRequest < TencentCloud::Common::AbstractModel # @param CcnId: 云联网实例ID。 # @type CcnId: String attr_accessor :CcnId def initialize(ccnid=nil) @CcnId = ccnid end def deserialize(params) @CcnId = params['CcnId'] end end # AttachCcn返回参数结构体 class AttachCcnResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # 挂载信息 class AttachDetail < TencentCloud::Common::AbstractModel # @param InstanceId: 实例ID # @type InstanceId: String # @param AttachedDiskCount: 实例已挂载弹性云盘数量 # @type AttachedDiskCount: Integer # @param MaxAttachCount: 可挂载弹性云盘数量 # @type MaxAttachCount: Integer attr_accessor :InstanceId, :AttachedDiskCount, :MaxAttachCount def initialize(instanceid=nil, attacheddiskcount=nil, maxattachcount=nil) @InstanceId = instanceid @AttachedDiskCount = attacheddiskcount @MaxAttachCount = maxattachcount end def deserialize(params) @InstanceId = params['InstanceId'] @AttachedDiskCount = params['AttachedDiskCount'] @MaxAttachCount = params['MaxAttachCount'] end end # AttachDisks请求参数结构体 class AttachDisksRequest < TencentCloud::Common::AbstractModel # @param DiskIds: 云硬盘ID列表。 # @type DiskIds: Array # @param InstanceId: 实例ID。 # @type InstanceId: String # @param RenewFlag: 续费标识。 # @type RenewFlag: String attr_accessor :DiskIds, :InstanceId, :RenewFlag def initialize(diskids=nil, instanceid=nil, renewflag=nil) @DiskIds = diskids @InstanceId = instanceid @RenewFlag = renewflag end def deserialize(params) @DiskIds = params['DiskIds'] @InstanceId = params['InstanceId'] @RenewFlag = params['RenewFlag'] end end # AttachDisks返回参数结构体 class AttachDisksResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # 描述了镜像信息。 class Blueprint < TencentCloud::Common::AbstractModel # @param BlueprintId: 镜像 ID ,是 Blueprint 的唯一标识。 # @type BlueprintId: String # @param DisplayTitle: 镜像对外展示标题。 # @type DisplayTitle: String # @param DisplayVersion: 镜像对外展示版本。 # @type DisplayVersion: String # @param Description: 镜像描述信息。 # @type Description: String # @param OsName: 操作系统名称。 # @type OsName: String # @param Platform: 操作系统平台。 # @type Platform: String # @param PlatformType: 操作系统平台类型,如 LINUX_UNIX、WINDOWS。 # @type PlatformType: String # @param BlueprintType: 镜像类型,如 APP_OS、PURE_OS、PRIVATE。 # @type BlueprintType: String # @param ImageUrl: 镜像图片 URL。 # @type ImageUrl: String # @param RequiredSystemDiskSize: 镜像所需系统盘大小,单位 GB。 # @type RequiredSystemDiskSize: Integer # @param BlueprintState: 镜像状态。 # @type BlueprintState: String # @param CreatedTime: 创建时间。按照 ISO8601 标准表示,并且使用 UTC 时间。 # 格式为: YYYY-MM-DDThh:mm:ssZ。 # 注意:此字段可能返回 null,表示取不到有效值。 # @type CreatedTime: String # @param BlueprintName: 镜像名称。 # @type BlueprintName: String # @param SupportAutomationTools: 镜像是否支持自动化助手。 # @type SupportAutomationTools: Boolean # @param RequiredMemorySize: 镜像所需内存大小, 单位: GB # @type RequiredMemorySize: Integer # @param ImageId: CVM镜像共享到轻量应用服务器轻量应用服务器后的CVM镜像ID。 # 注意:此字段可能返回 null,表示取不到有效值。 # @type ImageId: String attr_accessor :BlueprintId, :DisplayTitle, :DisplayVersion, :Description, :OsName, :Platform, :PlatformType, :BlueprintType, :ImageUrl, :RequiredSystemDiskSize, :BlueprintState, :CreatedTime, :BlueprintName, :SupportAutomationTools, :RequiredMemorySize, :ImageId def initialize(blueprintid=nil, displaytitle=nil, displayversion=nil, description=nil, osname=nil, platform=nil, platformtype=nil, blueprinttype=nil, imageurl=nil, requiredsystemdisksize=nil, blueprintstate=nil, createdtime=nil, blueprintname=nil, supportautomationtools=nil, requiredmemorysize=nil, imageid=nil) @BlueprintId = blueprintid @DisplayTitle = displaytitle @DisplayVersion = displayversion @Description = description @OsName = osname @Platform = platform @PlatformType = platformtype @BlueprintType = blueprinttype @ImageUrl = imageurl @RequiredSystemDiskSize = requiredsystemdisksize @BlueprintState = blueprintstate @CreatedTime = createdtime @BlueprintName = blueprintname @SupportAutomationTools = supportautomationtools @RequiredMemorySize = requiredmemorysize @ImageId = imageid end def deserialize(params) @BlueprintId = params['BlueprintId'] @DisplayTitle = params['DisplayTitle'] @DisplayVersion = params['DisplayVersion'] @Description = params['Description'] @OsName = params['OsName'] @Platform = params['Platform'] @PlatformType = params['PlatformType'] @BlueprintType = params['BlueprintType'] @ImageUrl = params['ImageUrl'] @RequiredSystemDiskSize = params['RequiredSystemDiskSize'] @BlueprintState = params['BlueprintState'] @CreatedTime = params['CreatedTime'] @BlueprintName = params['BlueprintName'] @SupportAutomationTools = params['SupportAutomationTools'] @RequiredMemorySize = params['RequiredMemorySize'] @ImageId = params['ImageId'] end end # 描述镜像实例信息。 class BlueprintInstance < TencentCloud::Common::AbstractModel # @param Blueprint: 镜像信息。 # @type Blueprint: :class:`Tencentcloud::Lighthouse.v20200324.models.Blueprint` # @param SoftwareSet: 软件列表。 # @type SoftwareSet: Array # @param InstanceId: 实例 ID。 # @type InstanceId: String attr_accessor :Blueprint, :SoftwareSet, :InstanceId def initialize(blueprint=nil, softwareset=nil, instanceid=nil) @Blueprint = blueprint @SoftwareSet = softwareset @InstanceId = instanceid end def deserialize(params) unless params['Blueprint'].nil? @Blueprint = Blueprint.new @Blueprint.deserialize(params['Blueprint']) end unless params['SoftwareSet'].nil? @SoftwareSet = [] params['SoftwareSet'].each do |i| software_tmp = Software.new software_tmp.deserialize(i) @SoftwareSet << software_tmp end end @InstanceId = params['InstanceId'] end end # BlueprintPrice 自定义镜像的价格参数。 class BlueprintPrice < TencentCloud::Common::AbstractModel # @param OriginalBlueprintPrice: 镜像单价,原价。单位元。 # @type OriginalBlueprintPrice: Float # @param OriginalPrice: 镜像总价,原价。单位元。 # @type OriginalPrice: Float # @param Discount: 折扣。 # @type Discount: Integer # @param DiscountPrice: 镜像折扣后总价。单位元。 # @type DiscountPrice: Float attr_accessor :OriginalBlueprintPrice, :OriginalPrice, :Discount, :DiscountPrice def initialize(originalblueprintprice=nil, originalprice=nil, discount=nil, discountprice=nil) @OriginalBlueprintPrice = originalblueprintprice @OriginalPrice = originalprice @Discount = discount @DiscountPrice = discountprice end def deserialize(params) @OriginalBlueprintPrice = params['OriginalBlueprintPrice'] @OriginalPrice = params['OriginalPrice'] @Discount = params['Discount'] @DiscountPrice = params['DiscountPrice'] end end # 套餐信息。 class Bundle < TencentCloud::Common::AbstractModel # @param BundleId: 套餐 ID。 # @type BundleId: String # @param Memory: 内存大小,单位 GB。 # @type Memory: Integer # @param SystemDiskType: 系统盘类型。 # 取值范围: #
  • LOCAL_BASIC:本地硬盘
  • LOCAL_SSD:本地 SSD 硬盘
  • CLOUD_BASIC:普通云硬盘
  • CLOUD_SSD:SSD 云硬盘
  • CLOUD_PREMIUM:高性能云硬盘
  • # @type SystemDiskType: String # @param SystemDiskSize: 系统盘大小。 # @type SystemDiskSize: Integer # @param MonthlyTraffic: 每月网络流量,单位 Gb。 # @type MonthlyTraffic: Integer # @param SupportLinuxUnixPlatform: 是否支持 Linux/Unix 平台。 # @type SupportLinuxUnixPlatform: Boolean # @param SupportWindowsPlatform: 是否支持 Windows 平台。 # @type SupportWindowsPlatform: Boolean # @param Price: 套餐当前单位价格信息。 # @type Price: :class:`Tencentcloud::Lighthouse.v20200324.models.Price` # @param CPU: CPU 核数。 # @type CPU: Integer # @param InternetMaxBandwidthOut: 峰值带宽,单位 Mbps。 # @type InternetMaxBandwidthOut: Integer # @param InternetChargeType: 网络计费类型。 # @type InternetChargeType: String # @param BundleSalesState: 套餐售卖状态,取值:‘AVAILABLE’(可用) , ‘SOLD_OUT’(售罄) # @type BundleSalesState: String # @param BundleType: 套餐类型。 # 取值范围: #
  • GENERAL_BUNDLE:通用型
  • STORAGE_BUNDLE:存储型
  • # @type BundleType: String # @param BundleDisplayLabel: 套餐展示标签. # 取值范围: # "ACTIVITY": 活动套餐, # "NORMAL": 普通套餐 # "CAREFREE": 无忧套餐 # @type BundleDisplayLabel: String attr_accessor :BundleId, :Memory, :SystemDiskType, :SystemDiskSize, :MonthlyTraffic, :SupportLinuxUnixPlatform, :SupportWindowsPlatform, :Price, :CPU, :InternetMaxBandwidthOut, :InternetChargeType, :BundleSalesState, :BundleType, :BundleDisplayLabel def initialize(bundleid=nil, memory=nil, systemdisktype=nil, systemdisksize=nil, monthlytraffic=nil, supportlinuxunixplatform=nil, supportwindowsplatform=nil, price=nil, cpu=nil, internetmaxbandwidthout=nil, internetchargetype=nil, bundlesalesstate=nil, bundletype=nil, bundledisplaylabel=nil) @BundleId = bundleid @Memory = memory @SystemDiskType = systemdisktype @SystemDiskSize = systemdisksize @MonthlyTraffic = monthlytraffic @SupportLinuxUnixPlatform = supportlinuxunixplatform @SupportWindowsPlatform = supportwindowsplatform @Price = price @CPU = cpu @InternetMaxBandwidthOut = internetmaxbandwidthout @InternetChargeType = internetchargetype @BundleSalesState = bundlesalesstate @BundleType = bundletype @BundleDisplayLabel = bundledisplaylabel end def deserialize(params) @BundleId = params['BundleId'] @Memory = params['Memory'] @SystemDiskType = params['SystemDiskType'] @SystemDiskSize = params['SystemDiskSize'] @MonthlyTraffic = params['MonthlyTraffic'] @SupportLinuxUnixPlatform = params['SupportLinuxUnixPlatform'] @SupportWindowsPlatform = params['SupportWindowsPlatform'] unless params['Price'].nil? @Price = Price.new @Price.deserialize(params['Price']) end @CPU = params['CPU'] @InternetMaxBandwidthOut = params['InternetMaxBandwidthOut'] @InternetChargeType = params['InternetChargeType'] @BundleSalesState = params['BundleSalesState'] @BundleType = params['BundleType'] @BundleDisplayLabel = params['BundleDisplayLabel'] end end # 云联网关联的实例列表。 class CcnAttachedInstance < TencentCloud::Common::AbstractModel # @param CcnId: 云联网ID。 # @type CcnId: String # @param CidrBlock: 关联实例CIDR。 # @type CidrBlock: Array # @param State: 关联实例状态: # • PENDING:申请中 # • ACTIVE:已连接 # • EXPIRED:已过期 # • REJECTED:已拒绝 # • DELETED:已删除 # • FAILED:失败的(2小时后将异步强制解关联) # • ATTACHING:关联中 # • DETACHING:解关联中 # • DETACHFAILED:解关联失败(2小时后将异步强制解关联) # @type State: String # @param AttachedTime: 关联时间。 # 注意:此字段可能返回 null,表示取不到有效值。 # @type AttachedTime: String # @param Description: 备注 # @type Description: String attr_accessor :CcnId, :CidrBlock, :State, :AttachedTime, :Description def initialize(ccnid=nil, cidrblock=nil, state=nil, attachedtime=nil, description=nil) @CcnId = ccnid @CidrBlock = cidrblock @State = state @AttachedTime = attachedtime @Description = description end def deserialize(params) @CcnId = params['CcnId'] @CidrBlock = params['CidrBlock'] @State = params['State'] @AttachedTime = params['AttachedTime'] @Description = params['Description'] end end # 容器环境变量 class ContainerEnv < TencentCloud::Common::AbstractModel # @param Key: 环境变量Key # @type Key: String # @param Value: 环境变量值 # @type Value: String attr_accessor :Key, :Value def initialize(key=nil, value=nil) @Key = key @Value = value end def deserialize(params) @Key = params['Key'] @Value = params['Value'] end end # CreateBlueprint请求参数结构体 class CreateBlueprintRequest < TencentCloud::Common::AbstractModel # @param BlueprintName: 镜像名称。最大长度60。 # @type BlueprintName: String # @param Description: 镜像描述。最大长度60。 # @type Description: String # @param InstanceId: 需要制作镜像的实例ID。 # @type InstanceId: String attr_accessor :BlueprintName, :Description, :InstanceId def initialize(blueprintname=nil, description=nil, instanceid=nil) @BlueprintName = blueprintname @Description = description @InstanceId = instanceid end def deserialize(params) @BlueprintName = params['BlueprintName'] @Description = params['Description'] @InstanceId = params['InstanceId'] end end # CreateBlueprint返回参数结构体 class CreateBlueprintResponse < TencentCloud::Common::AbstractModel # @param BlueprintId: 自定义镜像ID。 # @type BlueprintId: String # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :BlueprintId, :RequestId def initialize(blueprintid=nil, requestid=nil) @BlueprintId = blueprintid @RequestId = requestid end def deserialize(params) @BlueprintId = params['BlueprintId'] @RequestId = params['RequestId'] end end # CreateFirewallRules请求参数结构体 class CreateFirewallRulesRequest < TencentCloud::Common::AbstractModel # @param InstanceId: 实例 ID。 # @type InstanceId: String # @param FirewallRules: 防火墙规则列表。 # @type FirewallRules: Array # @param FirewallVersion: 防火墙当前版本。用户每次更新防火墙规则时版本会自动加1,防止规则已过期,不填不考虑冲突。 # @type FirewallVersion: Integer attr_accessor :InstanceId, :FirewallRules, :FirewallVersion def initialize(instanceid=nil, firewallrules=nil, firewallversion=nil) @InstanceId = instanceid @FirewallRules = firewallrules @FirewallVersion = firewallversion end def deserialize(params) @InstanceId = params['InstanceId'] unless params['FirewallRules'].nil? @FirewallRules = [] params['FirewallRules'].each do |i| firewallrule_tmp = FirewallRule.new firewallrule_tmp.deserialize(i) @FirewallRules << firewallrule_tmp end end @FirewallVersion = params['FirewallVersion'] end end # CreateFirewallRules返回参数结构体 class CreateFirewallRulesResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # CreateInstanceSnapshot请求参数结构体 class CreateInstanceSnapshotRequest < TencentCloud::Common::AbstractModel # @param InstanceId: 需要创建快照的实例 ID。 # @type InstanceId: String # @param SnapshotName: 快照名称,最长为 60 个字符。 # @type SnapshotName: String attr_accessor :InstanceId, :SnapshotName def initialize(instanceid=nil, snapshotname=nil) @InstanceId = instanceid @SnapshotName = snapshotname end def deserialize(params) @InstanceId = params['InstanceId'] @SnapshotName = params['SnapshotName'] end end # CreateInstanceSnapshot返回参数结构体 class CreateInstanceSnapshotResponse < TencentCloud::Common::AbstractModel # @param SnapshotId: 快照 ID。 # @type SnapshotId: String # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :SnapshotId, :RequestId def initialize(snapshotid=nil, requestid=nil) @SnapshotId = snapshotid @RequestId = requestid end def deserialize(params) @SnapshotId = params['SnapshotId'] @RequestId = params['RequestId'] end end # CreateInstances请求参数结构体 class CreateInstancesRequest < TencentCloud::Common::AbstractModel # @param BundleId: Lighthouse套餐ID。 # @type BundleId: String # @param BlueprintId: Lighthouse镜像ID。 # @type BlueprintId: String # @param InstanceChargePrepaid: 当前Lighthouse实例仅支持预付费模式,即包年包月相关参数设置,单位(月)。通过该参数可以指定包年包月实例的购买时长、是否设置自动续费等属性。该参数必传。 # @type InstanceChargePrepaid: :class:`Tencentcloud::Lighthouse.v20200324.models.InstanceChargePrepaid` # @param InstanceName: Lighthouse实例显示名称。 # @type InstanceName: String # @param InstanceCount: 购买Lighthouse实例数量。包年包月实例取值范围:[1,30]。默认取值:1。指定购买实例的数量不能超过用户所能购买的剩余配额数量 # @type InstanceCount: Integer # @param Zones: 可用区列表。默认为随机可用区 # @type Zones: Array # @param DryRun: 是否只预检此次请求。 # true:发送检查请求,不会创建实例。检查项包括是否填写了必需参数,请求格式,业务限制和库存。 # 如果检查不通过,则返回对应错误码; # 如果检查通过,则返回RequestId. # false(默认):发送正常请求,通过检查后直接创建实例 # @type DryRun: Boolean # @param ClientToken: 用于保证请求幂等性的字符串。该字符串由客户生成,需保证不同请求之间唯一,最大值不超过64个ASCII字符。若不指定该参数,则无法保证请求的幂等性。 # @type ClientToken: String # @param LoginConfiguration: 实例登录密码信息配置。本字段目前仅支持WINDOWS实例进行密码设置。默认缺失情况下代表用户选择实例创建后设置登录密码。 # @type LoginConfiguration: :class:`Tencentcloud::Lighthouse.v20200324.models.LoginConfiguration` # @param Containers: 要创建的容器配置列表。 # @type Containers: Array attr_accessor :BundleId, :BlueprintId, :InstanceChargePrepaid, :InstanceName, :InstanceCount, :Zones, :DryRun, :ClientToken, :LoginConfiguration, :Containers def initialize(bundleid=nil, blueprintid=nil, instancechargeprepaid=nil, instancename=nil, instancecount=nil, zones=nil, dryrun=nil, clienttoken=nil, loginconfiguration=nil, containers=nil) @BundleId = bundleid @BlueprintId = blueprintid @InstanceChargePrepaid = instancechargeprepaid @InstanceName = instancename @InstanceCount = instancecount @Zones = zones @DryRun = dryrun @ClientToken = clienttoken @LoginConfiguration = loginconfiguration @Containers = containers end def deserialize(params) @BundleId = params['BundleId'] @BlueprintId = params['BlueprintId'] unless params['InstanceChargePrepaid'].nil? @InstanceChargePrepaid = InstanceChargePrepaid.new @InstanceChargePrepaid.deserialize(params['InstanceChargePrepaid']) end @InstanceName = params['InstanceName'] @InstanceCount = params['InstanceCount'] @Zones = params['Zones'] @DryRun = params['DryRun'] @ClientToken = params['ClientToken'] unless params['LoginConfiguration'].nil? @LoginConfiguration = LoginConfiguration.new @LoginConfiguration.deserialize(params['LoginConfiguration']) end unless params['Containers'].nil? @Containers = [] params['Containers'].each do |i| dockercontainerconfiguration_tmp = DockerContainerConfiguration.new dockercontainerconfiguration_tmp.deserialize(i) @Containers << dockercontainerconfiguration_tmp end end end end # CreateInstances返回参数结构体 class CreateInstancesResponse < TencentCloud::Common::AbstractModel # @param InstanceIdSet: 当通过本接口来创建实例时会返回该参数,表示一个或多个实例ID。返回实例ID列表并不代表实例创建成功。 # 可根据 DescribeInstances 接口查询返回的InstancesSet中对应实例的ID的状态来判断创建是否完成;如果实例状态由“启动中”变为“运行中”,则为创建成功。 # @type InstanceIdSet: Array # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :InstanceIdSet, :RequestId def initialize(instanceidset=nil, requestid=nil) @InstanceIdSet = instanceidset @RequestId = requestid end def deserialize(params) @InstanceIdSet = params['InstanceIdSet'] @RequestId = params['RequestId'] end end # CreateKeyPair请求参数结构体 class CreateKeyPairRequest < TencentCloud::Common::AbstractModel # @param KeyName: 密钥对名称,可由数字,字母和下划线组成,长度不超过 25 个字符。 # @type KeyName: String attr_accessor :KeyName def initialize(keyname=nil) @KeyName = keyname end def deserialize(params) @KeyName = params['KeyName'] end end # CreateKeyPair返回参数结构体 class CreateKeyPairResponse < TencentCloud::Common::AbstractModel # @param KeyPair: 密钥对信息。 # @type KeyPair: :class:`Tencentcloud::Lighthouse.v20200324.models.KeyPair` # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :KeyPair, :RequestId def initialize(keypair=nil, requestid=nil) @KeyPair = keypair @RequestId = requestid end def deserialize(params) unless params['KeyPair'].nil? @KeyPair = KeyPair.new @KeyPair.deserialize(params['KeyPair']) end @RequestId = params['RequestId'] end end # 数据盘价格 class DataDiskPrice < TencentCloud::Common::AbstractModel # @param DiskId: 云硬盘ID。 # @type DiskId: String # @param OriginalDiskPrice: 云硬盘单价。 # @type OriginalDiskPrice: Float # @param OriginalPrice: 云硬盘总价。 # @type OriginalPrice: Float # @param Discount: 折扣。 # @type Discount: Float # @param DiscountPrice: 折后总价。 # @type DiscountPrice: Float attr_accessor :DiskId, :OriginalDiskPrice, :OriginalPrice, :Discount, :DiscountPrice def initialize(diskid=nil, originaldiskprice=nil, originalprice=nil, discount=nil, discountprice=nil) @DiskId = diskid @OriginalDiskPrice = originaldiskprice @OriginalPrice = originalprice @Discount = discount @DiscountPrice = discountprice end def deserialize(params) @DiskId = params['DiskId'] @OriginalDiskPrice = params['OriginalDiskPrice'] @OriginalPrice = params['OriginalPrice'] @Discount = params['Discount'] @DiscountPrice = params['DiscountPrice'] end end # DeleteBlueprints请求参数结构体 class DeleteBlueprintsRequest < TencentCloud::Common::AbstractModel # @param BlueprintIds: 镜像ID列表。镜像ID,可通过[DescribeBlueprints](https://cloud.tencent.com/document/product/1207/47689)接口返回值中的BlueprintId获取。 # @type BlueprintIds: Array attr_accessor :BlueprintIds def initialize(blueprintids=nil) @BlueprintIds = blueprintids end def deserialize(params) @BlueprintIds = params['BlueprintIds'] end end # DeleteBlueprints返回参数结构体 class DeleteBlueprintsResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # DeleteFirewallRules请求参数结构体 class DeleteFirewallRulesRequest < TencentCloud::Common::AbstractModel # @param InstanceId: 实例 ID。 # @type InstanceId: String # @param FirewallRules: 防火墙规则列表。 # @type FirewallRules: Array # @param FirewallVersion: 防火墙当前版本。用户每次更新防火墙规则时版本会自动加1,防止规则已过期,不填不考虑冲突。 # @type FirewallVersion: Integer attr_accessor :InstanceId, :FirewallRules, :FirewallVersion def initialize(instanceid=nil, firewallrules=nil, firewallversion=nil) @InstanceId = instanceid @FirewallRules = firewallrules @FirewallVersion = firewallversion end def deserialize(params) @InstanceId = params['InstanceId'] unless params['FirewallRules'].nil? @FirewallRules = [] params['FirewallRules'].each do |i| firewallrule_tmp = FirewallRule.new firewallrule_tmp.deserialize(i) @FirewallRules << firewallrule_tmp end end @FirewallVersion = params['FirewallVersion'] end end # DeleteFirewallRules返回参数结构体 class DeleteFirewallRulesResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # DeleteKeyPairs请求参数结构体 class DeleteKeyPairsRequest < TencentCloud::Common::AbstractModel # @param KeyIds: 密钥对 ID 列表,每次请求批量密钥对的上限为 10。 # @type KeyIds: Array attr_accessor :KeyIds def initialize(keyids=nil) @KeyIds = keyids end def deserialize(params) @KeyIds = params['KeyIds'] end end # DeleteKeyPairs返回参数结构体 class DeleteKeyPairsResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # DeleteSnapshots请求参数结构体 class DeleteSnapshotsRequest < TencentCloud::Common::AbstractModel # @param SnapshotIds: 要删除的快照 ID 列表,可通过 DescribeSnapshots 查询。 # @type SnapshotIds: Array attr_accessor :SnapshotIds def initialize(snapshotids=nil) @SnapshotIds = snapshotids end def deserialize(params) @SnapshotIds = params['SnapshotIds'] end end # DeleteSnapshots返回参数结构体 class DeleteSnapshotsResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # 限制操作。 class DeniedAction < TencentCloud::Common::AbstractModel # @param Action: 限制操作名。 # @type Action: String # @param Code: 限制操作消息码。 # @type Code: String # @param Message: 限制操作消息。 # @type Message: String attr_accessor :Action, :Code, :Message def initialize(action=nil, code=nil, message=nil) @Action = action @Code = code @Message = message end def deserialize(params) @Action = params['Action'] @Code = params['Code'] @Message = params['Message'] end end # DescribeBlueprintInstances请求参数结构体 class DescribeBlueprintInstancesRequest < TencentCloud::Common::AbstractModel # @param InstanceIds: 实例 ID 列表,当前最多支持 1 个。 # @type InstanceIds: Array attr_accessor :InstanceIds def initialize(instanceids=nil) @InstanceIds = instanceids end def deserialize(params) @InstanceIds = params['InstanceIds'] end end # DescribeBlueprintInstances返回参数结构体 class DescribeBlueprintInstancesResponse < TencentCloud::Common::AbstractModel # @param TotalCount: 符合条件的镜像实例数量。 # @type TotalCount: Integer # @param BlueprintInstanceSet: 镜像实例列表信息。 # @type BlueprintInstanceSet: Array # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :TotalCount, :BlueprintInstanceSet, :RequestId def initialize(totalcount=nil, blueprintinstanceset=nil, requestid=nil) @TotalCount = totalcount @BlueprintInstanceSet = blueprintinstanceset @RequestId = requestid end def deserialize(params) @TotalCount = params['TotalCount'] unless params['BlueprintInstanceSet'].nil? @BlueprintInstanceSet = [] params['BlueprintInstanceSet'].each do |i| blueprintinstance_tmp = BlueprintInstance.new blueprintinstance_tmp.deserialize(i) @BlueprintInstanceSet << blueprintinstance_tmp end end @RequestId = params['RequestId'] end end # DescribeBlueprints请求参数结构体 class DescribeBlueprintsRequest < TencentCloud::Common::AbstractModel # @param BlueprintIds: 镜像 ID 列表。 # @type BlueprintIds: Array # @param Offset: 偏移量,默认为 0。关于`Offset`的更进一步介绍请参考 API [简介](https://cloud.tencent.com/document/product/1207/47578)中的相关小节。 # @type Offset: Integer # @param Limit: 返回数量,默认为 20,最大值为 100。关于`Limit`的更进一步介绍请参考 API [简介](https://cloud.tencent.com/document/product/1207/47578)中的相关小节。 # @type Limit: Integer # @param Filters: 过滤器列表。 #
  • blueprint-id
  • 按照【镜像 ID】进行过滤。 # 类型:String # 必选:否 #
  • blueprint-type
  • 按照【镜像类型】进行过滤。 # 取值:APP_OS(应用镜像 );PURE_OS(系统镜像);PRIVATE(自定义镜像);SHARED(共享镜像)。 # 类型:String # 必选:否 #
  • platform-type
  • 按照【镜像平台类型】进行过滤。 # 取值: LINUX_UNIX(Linux/Unix系统);WINDOWS(Windows 系统)。 # 类型:String # 必选:否 #
  • blueprint-name
  • 按照【镜像名称】进行过滤。 # 类型:String # 必选:否 #
  • blueprint-state
  • 按照【镜像状态】进行过滤。 # 类型:String # 必选:否 # 每次请求的 Filters 的上限为 10,Filter.Values 的上限为 5。参数不支持同时指定 BlueprintIds 和 Filters 。 # @type Filters: Array attr_accessor :BlueprintIds, :Offset, :Limit, :Filters def initialize(blueprintids=nil, offset=nil, limit=nil, filters=nil) @BlueprintIds = blueprintids @Offset = offset @Limit = limit @Filters = filters end def deserialize(params) @BlueprintIds = params['BlueprintIds'] @Offset = params['Offset'] @Limit = params['Limit'] unless params['Filters'].nil? @Filters = [] params['Filters'].each do |i| filter_tmp = Filter.new filter_tmp.deserialize(i) @Filters << filter_tmp end end end end # DescribeBlueprints返回参数结构体 class DescribeBlueprintsResponse < TencentCloud::Common::AbstractModel # @param TotalCount: 符合条件的镜像数量。 # @type TotalCount: Integer # @param BlueprintSet: 镜像详细信息列表。 # @type BlueprintSet: Array # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :TotalCount, :BlueprintSet, :RequestId def initialize(totalcount=nil, blueprintset=nil, requestid=nil) @TotalCount = totalcount @BlueprintSet = blueprintset @RequestId = requestid end def deserialize(params) @TotalCount = params['TotalCount'] unless params['BlueprintSet'].nil? @BlueprintSet = [] params['BlueprintSet'].each do |i| blueprint_tmp = Blueprint.new blueprint_tmp.deserialize(i) @BlueprintSet << blueprint_tmp end end @RequestId = params['RequestId'] end end # DescribeBundleDiscount请求参数结构体 class DescribeBundleDiscountRequest < TencentCloud::Common::AbstractModel # @param BundleId: 套餐 ID。 # @type BundleId: String attr_accessor :BundleId def initialize(bundleid=nil) @BundleId = bundleid end def deserialize(params) @BundleId = params['BundleId'] end end # DescribeBundleDiscount返回参数结构体 class DescribeBundleDiscountResponse < TencentCloud::Common::AbstractModel # @param Currency: 币种:CNY人民币,USD 美元。 # @type Currency: String # @param DiscountDetail: 折扣梯度详情,每个梯度包含的信息有:时长,折扣数,总价,折扣价,折扣详情(用户折扣、官网折扣、最终折扣)。 # @type DiscountDetail: Array # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Currency, :DiscountDetail, :RequestId def initialize(currency=nil, discountdetail=nil, requestid=nil) @Currency = currency @DiscountDetail = discountdetail @RequestId = requestid end def deserialize(params) @Currency = params['Currency'] unless params['DiscountDetail'].nil? @DiscountDetail = [] params['DiscountDetail'].each do |i| discountdetail_tmp = DiscountDetail.new discountdetail_tmp.deserialize(i) @DiscountDetail << discountdetail_tmp end end @RequestId = params['RequestId'] end end # DescribeBundles请求参数结构体 class DescribeBundlesRequest < TencentCloud::Common::AbstractModel # @param BundleIds: 套餐 ID 列表。 # @type BundleIds: Array # @param Offset: 偏移量,默认为 0。关于`Offset`的更进一步介绍请参考 API [简介](https://cloud.tencent.com/document/product/1207/47578)中的相关小节。 # @type Offset: Integer # @param Limit: 返回数量,默认为 20,最大值为 100。关于`Limit`的更进一步介绍请参考 API [简介](https://cloud.tencent.com/document/product/1207/47578)中的相关小节。 # @type Limit: Integer # @param Filters: 过滤器列表。 #
  • bundle-id
  • 按照【套餐 ID】进行过滤。 # 类型:String # 必选:否 #
  • support-platform-type
  • 按照【系统类型】进行过滤。 # 取值: LINUX_UNIX(Linux/Unix系统);WINDOWS(Windows 系统) # 类型:String # 必选:否 # 每次请求的 Filters 的上限为 10,Filter.Values 的上限为 5。参数不支持同时指定 BundleIds 和 Filters。 # @type Filters: Array # @param Zones: 可用区列表。默认为全部可用区。 # @type Zones: Array attr_accessor :BundleIds, :Offset, :Limit, :Filters, :Zones def initialize(bundleids=nil, offset=nil, limit=nil, filters=nil, zones=nil) @BundleIds = bundleids @Offset = offset @Limit = limit @Filters = filters @Zones = zones end def deserialize(params) @BundleIds = params['BundleIds'] @Offset = params['Offset'] @Limit = params['Limit'] unless params['Filters'].nil? @Filters = [] params['Filters'].each do |i| filter_tmp = Filter.new filter_tmp.deserialize(i) @Filters << filter_tmp end end @Zones = params['Zones'] end end # DescribeBundles返回参数结构体 class DescribeBundlesResponse < TencentCloud::Common::AbstractModel # @param BundleSet: 套餐详细信息列表。 # @type BundleSet: Array # @param TotalCount: 符合要求的套餐总数,用于分页展示。 # @type TotalCount: Integer # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :BundleSet, :TotalCount, :RequestId def initialize(bundleset=nil, totalcount=nil, requestid=nil) @BundleSet = bundleset @TotalCount = totalcount @RequestId = requestid end def deserialize(params) unless params['BundleSet'].nil? @BundleSet = [] params['BundleSet'].each do |i| bundle_tmp = Bundle.new bundle_tmp.deserialize(i) @BundleSet << bundle_tmp end end @TotalCount = params['TotalCount'] @RequestId = params['RequestId'] end end # DescribeCcnAttachedInstances请求参数结构体 class DescribeCcnAttachedInstancesRequest < TencentCloud::Common::AbstractModel def initialize() end def deserialize(params) end end # DescribeCcnAttachedInstances返回参数结构体 class DescribeCcnAttachedInstancesResponse < TencentCloud::Common::AbstractModel # @param CcnAttachedInstanceSet: 云联网关联的实例列表。 # 注意:此字段可能返回 null,表示取不到有效值。 # @type CcnAttachedInstanceSet: Array # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :CcnAttachedInstanceSet, :RequestId def initialize(ccnattachedinstanceset=nil, requestid=nil) @CcnAttachedInstanceSet = ccnattachedinstanceset @RequestId = requestid end def deserialize(params) unless params['CcnAttachedInstanceSet'].nil? @CcnAttachedInstanceSet = [] params['CcnAttachedInstanceSet'].each do |i| ccnattachedinstance_tmp = CcnAttachedInstance.new ccnattachedinstance_tmp.deserialize(i) @CcnAttachedInstanceSet << ccnattachedinstance_tmp end end @RequestId = params['RequestId'] end end # DescribeDiskConfigs请求参数结构体 class DescribeDiskConfigsRequest < TencentCloud::Common::AbstractModel # @param Filters: 过滤器列表。 #
  • zone
  • 按照【可用区】进行过滤。 # 类型:String # 必选:否 # @type Filters: Array attr_accessor :Filters def initialize(filters=nil) @Filters = filters end def deserialize(params) unless params['Filters'].nil? @Filters = [] params['Filters'].each do |i| filter_tmp = Filter.new filter_tmp.deserialize(i) @Filters << filter_tmp end end end end # DescribeDiskConfigs返回参数结构体 class DescribeDiskConfigsResponse < TencentCloud::Common::AbstractModel # @param DiskConfigSet: 云硬盘配置列表。 # @type DiskConfigSet: Array # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :DiskConfigSet, :RequestId def initialize(diskconfigset=nil, requestid=nil) @DiskConfigSet = diskconfigset @RequestId = requestid end def deserialize(params) unless params['DiskConfigSet'].nil? @DiskConfigSet = [] params['DiskConfigSet'].each do |i| diskconfig_tmp = DiskConfig.new diskconfig_tmp.deserialize(i) @DiskConfigSet << diskconfig_tmp end end @RequestId = params['RequestId'] end end # DescribeDiskDiscount请求参数结构体 class DescribeDiskDiscountRequest < TencentCloud::Common::AbstractModel # @param DiskType: 云硬盘类型, 取值: "CLOUD_PREMIUM"。 # @type DiskType: String # @param DiskSize: 云硬盘大小。 # @type DiskSize: Integer attr_accessor :DiskType, :DiskSize def initialize(disktype=nil, disksize=nil) @DiskType = disktype @DiskSize = disksize end def deserialize(params) @DiskType = params['DiskType'] @DiskSize = params['DiskSize'] end end # DescribeDiskDiscount返回参数结构体 class DescribeDiskDiscountResponse < TencentCloud::Common::AbstractModel # @param Currency: 币种:CNY人民币,USD 美元。 # @type Currency: String # @param DiscountDetail: 折扣梯度详情,每个梯度包含的信息有:时长,折扣数,总价,折扣价,折扣详情(用户折扣、官网折扣、最终折扣)。 # @type DiscountDetail: Array # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Currency, :DiscountDetail, :RequestId def initialize(currency=nil, discountdetail=nil, requestid=nil) @Currency = currency @DiscountDetail = discountdetail @RequestId = requestid end def deserialize(params) @Currency = params['Currency'] unless params['DiscountDetail'].nil? @DiscountDetail = [] params['DiscountDetail'].each do |i| discountdetail_tmp = DiscountDetail.new discountdetail_tmp.deserialize(i) @DiscountDetail << discountdetail_tmp end end @RequestId = params['RequestId'] end end # DescribeDisksDeniedActions请求参数结构体 class DescribeDisksDeniedActionsRequest < TencentCloud::Common::AbstractModel # @param DiskIds: 云硬盘ID列表。 # @type DiskIds: Array attr_accessor :DiskIds def initialize(diskids=nil) @DiskIds = diskids end def deserialize(params) @DiskIds = params['DiskIds'] end end # DescribeDisksDeniedActions返回参数结构体 class DescribeDisksDeniedActionsResponse < TencentCloud::Common::AbstractModel # @param DiskDeniedActionSet: 云硬盘操作限制列表详细信息。 # @type DiskDeniedActionSet: Array # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :DiskDeniedActionSet, :RequestId def initialize(diskdeniedactionset=nil, requestid=nil) @DiskDeniedActionSet = diskdeniedactionset @RequestId = requestid end def deserialize(params) unless params['DiskDeniedActionSet'].nil? @DiskDeniedActionSet = [] params['DiskDeniedActionSet'].each do |i| diskdeniedactions_tmp = DiskDeniedActions.new diskdeniedactions_tmp.deserialize(i) @DiskDeniedActionSet << diskdeniedactions_tmp end end @RequestId = params['RequestId'] end end # DescribeDisks请求参数结构体 class DescribeDisksRequest < TencentCloud::Common::AbstractModel # @param DiskIds: 云硬盘ID列表。 # @type DiskIds: Array # @param Filters: 过滤器列表。 # disk-id # 按照【云硬盘 ID】进行过滤。 # 类型:String # 必选:否 # instance-id # 按照【实例ID】进行过滤。 # 类型:String # 必选:否 # disk-name # 按照【云硬盘名称】进行过滤。 # 类型:String # 必选:否 # zone # 按照【可用区】进行过滤。 # 类型:String # 必选:否 # disk-usage # 按照【云硬盘类型】进行过滤。 # 类型:String # 必选:否 # disk-state # 按照【云硬盘状态】进行过滤。 # 类型:String # 必选:否 # 每次请求的 Filters 的上限为 10,Filter.Values 的上限为 5。参数不支持同时指定 DiskIds 和 Filters。 # @type Filters: Array # @param Limit: 返回数量,默认为20,最大值为100。 # @type Limit: Integer # @param Offset: 偏移量,默认为0。 # @type Offset: Integer # @param OrderField: 云硬盘列表排序的依据字段。取值范围:"CREATED_TIME":依据云硬盘的创建时间排序。 "EXPIRED_TIME":依据云硬盘的到期时间排序。"DISK_SIZE":依据云硬盘的大小排序。默认按云硬盘创建时间排序。 # @type OrderField: String # @param Order: 输出云硬盘列表的排列顺序。取值范围:"ASC":升序排列。 "DESC":降序排列。默认按降序排列。 # @type Order: String attr_accessor :DiskIds, :Filters, :Limit, :Offset, :OrderField, :Order def initialize(diskids=nil, filters=nil, limit=nil, offset=nil, orderfield=nil, order=nil) @DiskIds = diskids @Filters = filters @Limit = limit @Offset = offset @OrderField = orderfield @Order = order end def deserialize(params) @DiskIds = params['DiskIds'] unless params['Filters'].nil? @Filters = [] params['Filters'].each do |i| filter_tmp = Filter.new filter_tmp.deserialize(i) @Filters << filter_tmp end end @Limit = params['Limit'] @Offset = params['Offset'] @OrderField = params['OrderField'] @Order = params['Order'] end end # DescribeDisks返回参数结构体 class DescribeDisksResponse < TencentCloud::Common::AbstractModel # @param DiskSet: 云硬盘信息列表。 # @type DiskSet: Array # @param TotalCount: 符合条件的云硬盘信息数量。 # @type TotalCount: Integer # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :DiskSet, :TotalCount, :RequestId def initialize(diskset=nil, totalcount=nil, requestid=nil) @DiskSet = diskset @TotalCount = totalcount @RequestId = requestid end def deserialize(params) unless params['DiskSet'].nil? @DiskSet = [] params['DiskSet'].each do |i| disk_tmp = Disk.new disk_tmp.deserialize(i) @DiskSet << disk_tmp end end @TotalCount = params['TotalCount'] @RequestId = params['RequestId'] end end # DescribeDisksReturnable请求参数结构体 class DescribeDisksReturnableRequest < TencentCloud::Common::AbstractModel # @param DiskIds: 云硬盘ID列表。 # @type DiskIds: Array # @param Limit: 返回数量,默认为20,最大值为100。 # @type Limit: Integer # @param Offset: 偏移量,默认为0。 # @type Offset: Integer attr_accessor :DiskIds, :Limit, :Offset def initialize(diskids=nil, limit=nil, offset=nil) @DiskIds = diskids @Limit = limit @Offset = offset end def deserialize(params) @DiskIds = params['DiskIds'] @Limit = params['Limit'] @Offset = params['Offset'] end end # DescribeDisksReturnable返回参数结构体 class DescribeDisksReturnableResponse < TencentCloud::Common::AbstractModel # @param DiskReturnableSet: 可退还云硬盘详细信息列表。 # @type DiskReturnableSet: Array # @param TotalCount: 符合条件的云硬盘数量。 # @type TotalCount: Integer # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :DiskReturnableSet, :TotalCount, :RequestId def initialize(diskreturnableset=nil, totalcount=nil, requestid=nil) @DiskReturnableSet = diskreturnableset @TotalCount = totalcount @RequestId = requestid end def deserialize(params) unless params['DiskReturnableSet'].nil? @DiskReturnableSet = [] params['DiskReturnableSet'].each do |i| diskreturnable_tmp = DiskReturnable.new diskreturnable_tmp.deserialize(i) @DiskReturnableSet << diskreturnable_tmp end end @TotalCount = params['TotalCount'] @RequestId = params['RequestId'] end end # DescribeFirewallRules请求参数结构体 class DescribeFirewallRulesRequest < TencentCloud::Common::AbstractModel # @param InstanceId: 实例 ID。 # @type InstanceId: String # @param Offset: 偏移量,默认为 0。 # @type Offset: Integer # @param Limit: 返回数量,默认为 20,最大值为 100。 # @type Limit: Integer attr_accessor :InstanceId, :Offset, :Limit def initialize(instanceid=nil, offset=nil, limit=nil) @InstanceId = instanceid @Offset = offset @Limit = limit end def deserialize(params) @InstanceId = params['InstanceId'] @Offset = params['Offset'] @Limit = params['Limit'] end end # DescribeFirewallRules返回参数结构体 class DescribeFirewallRulesResponse < TencentCloud::Common::AbstractModel # @param TotalCount: 符合条件的防火墙规则数量。 # @type TotalCount: Integer # @param FirewallRuleSet: 防火墙规则详细信息列表。 # @type FirewallRuleSet: Array # @param FirewallVersion: 防火墙版本号。 # @type FirewallVersion: Integer # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :TotalCount, :FirewallRuleSet, :FirewallVersion, :RequestId def initialize(totalcount=nil, firewallruleset=nil, firewallversion=nil, requestid=nil) @TotalCount = totalcount @FirewallRuleSet = firewallruleset @FirewallVersion = firewallversion @RequestId = requestid end def deserialize(params) @TotalCount = params['TotalCount'] unless params['FirewallRuleSet'].nil? @FirewallRuleSet = [] params['FirewallRuleSet'].each do |i| firewallruleinfo_tmp = FirewallRuleInfo.new firewallruleinfo_tmp.deserialize(i) @FirewallRuleSet << firewallruleinfo_tmp end end @FirewallVersion = params['FirewallVersion'] @RequestId = params['RequestId'] end end # DescribeFirewallRulesTemplate请求参数结构体 class DescribeFirewallRulesTemplateRequest < TencentCloud::Common::AbstractModel def initialize() end def deserialize(params) end end # DescribeFirewallRulesTemplate返回参数结构体 class DescribeFirewallRulesTemplateResponse < TencentCloud::Common::AbstractModel # @param TotalCount: 符合条件的防火墙规则数量。 # @type TotalCount: Integer # @param FirewallRuleSet: 防火墙规则详细信息列表。 # @type FirewallRuleSet: Array # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :TotalCount, :FirewallRuleSet, :RequestId def initialize(totalcount=nil, firewallruleset=nil, requestid=nil) @TotalCount = totalcount @FirewallRuleSet = firewallruleset @RequestId = requestid end def deserialize(params) @TotalCount = params['TotalCount'] unless params['FirewallRuleSet'].nil? @FirewallRuleSet = [] params['FirewallRuleSet'].each do |i| firewallruleinfo_tmp = FirewallRuleInfo.new firewallruleinfo_tmp.deserialize(i) @FirewallRuleSet << firewallruleinfo_tmp end end @RequestId = params['RequestId'] end end # DescribeGeneralResourceQuotas请求参数结构体 class DescribeGeneralResourceQuotasRequest < TencentCloud::Common::AbstractModel # @param ResourceNames: 资源名列表,取值为:USER_KEY_PAIR、INSTANCE、SNAPSHOT。 # @type ResourceNames: Array attr_accessor :ResourceNames def initialize(resourcenames=nil) @ResourceNames = resourcenames end def deserialize(params) @ResourceNames = params['ResourceNames'] end end # DescribeGeneralResourceQuotas返回参数结构体 class DescribeGeneralResourceQuotasResponse < TencentCloud::Common::AbstractModel # @param GeneralResourceQuotaSet: 通用资源配额详细信息列表。 # @type GeneralResourceQuotaSet: Array # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :GeneralResourceQuotaSet, :RequestId def initialize(generalresourcequotaset=nil, requestid=nil) @GeneralResourceQuotaSet = generalresourcequotaset @RequestId = requestid end def deserialize(params) unless params['GeneralResourceQuotaSet'].nil? @GeneralResourceQuotaSet = [] params['GeneralResourceQuotaSet'].each do |i| generalresourcequota_tmp = GeneralResourceQuota.new generalresourcequota_tmp.deserialize(i) @GeneralResourceQuotaSet << generalresourcequota_tmp end end @RequestId = params['RequestId'] end end # DescribeInstanceLoginKeyPairAttribute请求参数结构体 class DescribeInstanceLoginKeyPairAttributeRequest < TencentCloud::Common::AbstractModel # @param InstanceId: 实例ID。 # @type InstanceId: String attr_accessor :InstanceId def initialize(instanceid=nil) @InstanceId = instanceid end def deserialize(params) @InstanceId = params['InstanceId'] end end # DescribeInstanceLoginKeyPairAttribute返回参数结构体 class DescribeInstanceLoginKeyPairAttributeResponse < TencentCloud::Common::AbstractModel # @param PermitLogin: 是否允许使用默认密钥对登录,YES:允许登录 NO:禁止登录。 # @type PermitLogin: String # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :PermitLogin, :RequestId def initialize(permitlogin=nil, requestid=nil) @PermitLogin = permitlogin @RequestId = requestid end def deserialize(params) @PermitLogin = params['PermitLogin'] @RequestId = params['RequestId'] end end # DescribeInstanceVncUrl请求参数结构体 class DescribeInstanceVncUrlRequest < TencentCloud::Common::AbstractModel # @param InstanceId: 实例 ID。可通过[DescribeInstances](https://cloud.tencent.com/document/api/1207/47573)接口返回值中的InstanceId获取。 # @type InstanceId: String attr_accessor :InstanceId def initialize(instanceid=nil) @InstanceId = instanceid end def deserialize(params) @InstanceId = params['InstanceId'] end end # DescribeInstanceVncUrl返回参数结构体 class DescribeInstanceVncUrlResponse < TencentCloud::Common::AbstractModel # @param InstanceVncUrl: 实例的管理终端地址。 # @type InstanceVncUrl: String # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :InstanceVncUrl, :RequestId def initialize(instancevncurl=nil, requestid=nil) @InstanceVncUrl = instancevncurl @RequestId = requestid end def deserialize(params) @InstanceVncUrl = params['InstanceVncUrl'] @RequestId = params['RequestId'] end end # DescribeInstancesDeniedActions请求参数结构体 class DescribeInstancesDeniedActionsRequest < TencentCloud::Common::AbstractModel # @param InstanceIds: 实例 ID 列表。每次请求批量实例的上限为 100。可通过[DescribeInstances](https://cloud.tencent.com/document/api/1207/47573)接口返回值中的InstanceId获取。 # @type InstanceIds: Array attr_accessor :InstanceIds def initialize(instanceids=nil) @InstanceIds = instanceids end def deserialize(params) @InstanceIds = params['InstanceIds'] end end # DescribeInstancesDeniedActions返回参数结构体 class DescribeInstancesDeniedActionsResponse < TencentCloud::Common::AbstractModel # @param InstanceDeniedActionSet: 实例操作限制列表详细信息。 # @type InstanceDeniedActionSet: Array # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :InstanceDeniedActionSet, :RequestId def initialize(instancedeniedactionset=nil, requestid=nil) @InstanceDeniedActionSet = instancedeniedactionset @RequestId = requestid end def deserialize(params) unless params['InstanceDeniedActionSet'].nil? @InstanceDeniedActionSet = [] params['InstanceDeniedActionSet'].each do |i| instancedeniedactions_tmp = InstanceDeniedActions.new instancedeniedactions_tmp.deserialize(i) @InstanceDeniedActionSet << instancedeniedactions_tmp end end @RequestId = params['RequestId'] end end # DescribeInstancesDiskNum请求参数结构体 class DescribeInstancesDiskNumRequest < TencentCloud::Common::AbstractModel # @param InstanceIds: 实例ID列表。 # @type InstanceIds: Array attr_accessor :InstanceIds def initialize(instanceids=nil) @InstanceIds = instanceids end def deserialize(params) @InstanceIds = params['InstanceIds'] end end # DescribeInstancesDiskNum返回参数结构体 class DescribeInstancesDiskNumResponse < TencentCloud::Common::AbstractModel # @param AttachDetailSet: 挂载信息列表 # @type AttachDetailSet: Array # @param TotalCount: 挂载信息数量 # @type TotalCount: Integer # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :AttachDetailSet, :TotalCount, :RequestId def initialize(attachdetailset=nil, totalcount=nil, requestid=nil) @AttachDetailSet = attachdetailset @TotalCount = totalcount @RequestId = requestid end def deserialize(params) unless params['AttachDetailSet'].nil? @AttachDetailSet = [] params['AttachDetailSet'].each do |i| attachdetail_tmp = AttachDetail.new attachdetail_tmp.deserialize(i) @AttachDetailSet << attachdetail_tmp end end @TotalCount = params['TotalCount'] @RequestId = params['RequestId'] end end # DescribeInstances请求参数结构体 class DescribeInstancesRequest < TencentCloud::Common::AbstractModel # @param InstanceIds: 实例 ID 列表。每次请求批量实例的上限为 100。 # @type InstanceIds: Array # @param Filters: 过滤器列表。 #
  • instance-name
  • 按照【实例名称】进行过滤。 # 类型:String # 必选:否 #
  • private-ip-address
  • 按照【实例主网卡的内网 IP】进行过滤。 # 类型:String # 必选:否 #
  • public-ip-address
  • 按照【实例主网卡的公网 IP】进行过滤。 # 类型:String # 必选:否 #
  • zone
  • 按照【可用区】进行过滤。 # 类型:String # 必选:否 #
  • instance-state
  • 按照【实例状态】进行过滤。 # 类型:String # 必选:否 # 每次请求的 Filters 的上限为 10,Filter.Values 的上限为 100。参数不支持同时指定 InstanceIds 和 Filters。 # @type Filters: Array # @param Offset: 偏移量,默认为 0。关于`Offset`的更进一步介绍请参考 API [简介](https://cloud.tencent.com/document/product/1207/47578)中的相关小节。 # @type Offset: Integer # @param Limit: 返回数量,默认为 20,最大值为 100。关于`Limit`的更进一步介绍请参考 API [简介](https://cloud.tencent.com/document/product/1207/47578)中的相关小节。 # @type Limit: Integer attr_accessor :InstanceIds, :Filters, :Offset, :Limit def initialize(instanceids=nil, filters=nil, offset=nil, limit=nil) @InstanceIds = instanceids @Filters = filters @Offset = offset @Limit = limit end def deserialize(params) @InstanceIds = params['InstanceIds'] unless params['Filters'].nil? @Filters = [] params['Filters'].each do |i| filter_tmp = Filter.new filter_tmp.deserialize(i) @Filters << filter_tmp end end @Offset = params['Offset'] @Limit = params['Limit'] end end # DescribeInstances返回参数结构体 class DescribeInstancesResponse < TencentCloud::Common::AbstractModel # @param TotalCount: 符合条件的实例数量。 # @type TotalCount: Integer # @param InstanceSet: 实例详细信息列表。 # @type InstanceSet: Array # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :TotalCount, :InstanceSet, :RequestId def initialize(totalcount=nil, instanceset=nil, requestid=nil) @TotalCount = totalcount @InstanceSet = instanceset @RequestId = requestid end def deserialize(params) @TotalCount = params['TotalCount'] unless params['InstanceSet'].nil? @InstanceSet = [] params['InstanceSet'].each do |i| instance_tmp = Instance.new instance_tmp.deserialize(i) @InstanceSet << instance_tmp end end @RequestId = params['RequestId'] end end # DescribeInstancesReturnable请求参数结构体 class DescribeInstancesReturnableRequest < TencentCloud::Common::AbstractModel # @param InstanceIds: 实例 ID 列表。每次请求批量实例的上限为 100。可通过[DescribeInstances](https://cloud.tencent.com/document/api/1207/47573)接口返回值中的InstanceId获取。 # @type InstanceIds: Array # @param Offset: 偏移量,默认为 0。 # @type Offset: Integer # @param Limit: 返回数量,默认为 20,最大值为 100。 # @type Limit: Integer attr_accessor :InstanceIds, :Offset, :Limit def initialize(instanceids=nil, offset=nil, limit=nil) @InstanceIds = instanceids @Offset = offset @Limit = limit end def deserialize(params) @InstanceIds = params['InstanceIds'] @Offset = params['Offset'] @Limit = params['Limit'] end end # DescribeInstancesReturnable返回参数结构体 class DescribeInstancesReturnableResponse < TencentCloud::Common::AbstractModel # @param TotalCount: 符合条件的实例数量。 # @type TotalCount: Integer # @param InstanceReturnableSet: 可退还实例详细信息列表。 # @type InstanceReturnableSet: Array # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :TotalCount, :InstanceReturnableSet, :RequestId def initialize(totalcount=nil, instancereturnableset=nil, requestid=nil) @TotalCount = totalcount @InstanceReturnableSet = instancereturnableset @RequestId = requestid end def deserialize(params) @TotalCount = params['TotalCount'] unless params['InstanceReturnableSet'].nil? @InstanceReturnableSet = [] params['InstanceReturnableSet'].each do |i| instancereturnable_tmp = InstanceReturnable.new instancereturnable_tmp.deserialize(i) @InstanceReturnableSet << instancereturnable_tmp end end @RequestId = params['RequestId'] end end # DescribeInstancesTrafficPackages请求参数结构体 class DescribeInstancesTrafficPackagesRequest < TencentCloud::Common::AbstractModel # @param InstanceIds: 实例 ID 列表。每次请求批量实例的上限为 100。可通过[DescribeInstances](https://cloud.tencent.com/document/api/1207/47573)接口返回值中的InstanceId获取。 # @type InstanceIds: Array # @param Offset: 偏移量,默认为 0。 # @type Offset: Integer # @param Limit: 返回数量,默认为 20,最大值为 100。 # @type Limit: Integer attr_accessor :InstanceIds, :Offset, :Limit def initialize(instanceids=nil, offset=nil, limit=nil) @InstanceIds = instanceids @Offset = offset @Limit = limit end def deserialize(params) @InstanceIds = params['InstanceIds'] @Offset = params['Offset'] @Limit = params['Limit'] end end # DescribeInstancesTrafficPackages返回参数结构体 class DescribeInstancesTrafficPackagesResponse < TencentCloud::Common::AbstractModel # @param TotalCount: 符合条件的实例流量包详情数量。 # @type TotalCount: Integer # @param InstanceTrafficPackageSet: 实例流量包详情列表。 # @type InstanceTrafficPackageSet: Array # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :TotalCount, :InstanceTrafficPackageSet, :RequestId def initialize(totalcount=nil, instancetrafficpackageset=nil, requestid=nil) @TotalCount = totalcount @InstanceTrafficPackageSet = instancetrafficpackageset @RequestId = requestid end def deserialize(params) @TotalCount = params['TotalCount'] unless params['InstanceTrafficPackageSet'].nil? @InstanceTrafficPackageSet = [] params['InstanceTrafficPackageSet'].each do |i| instancetrafficpackage_tmp = InstanceTrafficPackage.new instancetrafficpackage_tmp.deserialize(i) @InstanceTrafficPackageSet << instancetrafficpackage_tmp end end @RequestId = params['RequestId'] end end # DescribeKeyPairs请求参数结构体 class DescribeKeyPairsRequest < TencentCloud::Common::AbstractModel # @param KeyIds: 密钥对 ID 列表。 # @type KeyIds: Array # @param Offset: 偏移量,默认为 0。 # @type Offset: Integer # @param Limit: 返回数量,默认为 20,最大值为 100。 # @type Limit: Integer # @param Filters: 过滤器列表。 #
  • key-id
  • 按照【密钥对ID】进行过滤。 # 类型:String # 必选:否 #
  • key-name
  • 按照【密钥对名称】进行过滤。 # 类型:String # 必选:否 # 每次请求的 Filters 的上限为 10,Filter.Values 的上限为 5。参数不支持同时指定 KeyIds 和 Filters。 # @type Filters: Array attr_accessor :KeyIds, :Offset, :Limit, :Filters def initialize(keyids=nil, offset=nil, limit=nil, filters=nil) @KeyIds = keyids @Offset = offset @Limit = limit @Filters = filters end def deserialize(params) @KeyIds = params['KeyIds'] @Offset = params['Offset'] @Limit = params['Limit'] unless params['Filters'].nil? @Filters = [] params['Filters'].each do |i| filter_tmp = Filter.new filter_tmp.deserialize(i) @Filters << filter_tmp end end end end # DescribeKeyPairs返回参数结构体 class DescribeKeyPairsResponse < TencentCloud::Common::AbstractModel # @param TotalCount: 符合条件的密钥对数量。 # @type TotalCount: Integer # @param KeyPairSet: 密钥对详细信息列表。 # @type KeyPairSet: Array # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :TotalCount, :KeyPairSet, :RequestId def initialize(totalcount=nil, keypairset=nil, requestid=nil) @TotalCount = totalcount @KeyPairSet = keypairset @RequestId = requestid end def deserialize(params) @TotalCount = params['TotalCount'] unless params['KeyPairSet'].nil? @KeyPairSet = [] params['KeyPairSet'].each do |i| keypair_tmp = KeyPair.new keypair_tmp.deserialize(i) @KeyPairSet << keypair_tmp end end @RequestId = params['RequestId'] end end # DescribeModifyInstanceBundles请求参数结构体 class DescribeModifyInstanceBundlesRequest < TencentCloud::Common::AbstractModel # @param InstanceId: 实例 ID。 # @type InstanceId: String # @param Filters: 过滤器列表。 #
  • bundle-id
  • 按照【套餐 ID】进行过滤。 # 类型:String # 必选:否 #
  • support-platform-type
  • 按照【系统类型】进行过滤。 # 取值: LINUX_UNIX(Linux/Unix系统);WINDOWS(Windows 系统) # 类型:String # 必选:否 # 每次请求的 Filters 的上限为 10,Filter.Values 的上限为 5。 # @type Filters: Array # @param Offset: 偏移量,默认为 0。关于`Offset`的更进一步介绍请参考 API [简介](https://cloud.tencent.com/document/product/1207/47578)中的相关小节。 # @type Offset: Integer # @param Limit: 返回数量,默认为 20,最大值为 100。关于`Limit`的更进一步介绍请参考 API [简介](https://cloud.tencent.com/document/product/1207/47578)中的相关小节。 # @type Limit: Integer attr_accessor :InstanceId, :Filters, :Offset, :Limit def initialize(instanceid=nil, filters=nil, offset=nil, limit=nil) @InstanceId = instanceid @Filters = filters @Offset = offset @Limit = limit end def deserialize(params) @InstanceId = params['InstanceId'] unless params['Filters'].nil? @Filters = [] params['Filters'].each do |i| filter_tmp = Filter.new filter_tmp.deserialize(i) @Filters << filter_tmp end end @Offset = params['Offset'] @Limit = params['Limit'] end end # DescribeModifyInstanceBundles返回参数结构体 class DescribeModifyInstanceBundlesResponse < TencentCloud::Common::AbstractModel # @param TotalCount: 符合条件的套餐数量。 # @type TotalCount: Integer # @param ModifyBundleSet: 变更套餐详细信息。 # @type ModifyBundleSet: Array # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :TotalCount, :ModifyBundleSet, :RequestId def initialize(totalcount=nil, modifybundleset=nil, requestid=nil) @TotalCount = totalcount @ModifyBundleSet = modifybundleset @RequestId = requestid end def deserialize(params) @TotalCount = params['TotalCount'] unless params['ModifyBundleSet'].nil? @ModifyBundleSet = [] params['ModifyBundleSet'].each do |i| modifybundle_tmp = ModifyBundle.new modifybundle_tmp.deserialize(i) @ModifyBundleSet << modifybundle_tmp end end @RequestId = params['RequestId'] end end # DescribeRegions请求参数结构体 class DescribeRegionsRequest < TencentCloud::Common::AbstractModel def initialize() end def deserialize(params) end end # DescribeRegions返回参数结构体 class DescribeRegionsResponse < TencentCloud::Common::AbstractModel # @param TotalCount: 地域数量。 # @type TotalCount: Integer # @param RegionSet: 地域信息列表。 # @type RegionSet: Array # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :TotalCount, :RegionSet, :RequestId def initialize(totalcount=nil, regionset=nil, requestid=nil) @TotalCount = totalcount @RegionSet = regionset @RequestId = requestid end def deserialize(params) @TotalCount = params['TotalCount'] unless params['RegionSet'].nil? @RegionSet = [] params['RegionSet'].each do |i| regioninfo_tmp = RegionInfo.new regioninfo_tmp.deserialize(i) @RegionSet << regioninfo_tmp end end @RequestId = params['RequestId'] end end # DescribeResetInstanceBlueprints请求参数结构体 class DescribeResetInstanceBlueprintsRequest < TencentCloud::Common::AbstractModel # @param InstanceId: 实例ID # @type InstanceId: String # @param Offset: 偏移量,默认为 0。关于`Offset`的更进一步介绍请参考 API [简介](https://cloud.tencent.com/document/product/1207/47578)中的相关小节。 # @type Offset: Integer # @param Limit: 返回数量,默认为 20,最大值为 100。关于`Limit`的更进一步介绍请参考 API [简介](https://cloud.tencent.com/document/product/1207/47578)中的相关小节。 # @type Limit: Integer # @param Filters: 过滤器列表。 #
  • blueprint-id
  • 按照【镜像 ID】进行过滤。 # 类型:String # 必选:否 #
  • blueprint-type
  • 按照【镜像类型】进行过滤。 # 取值: APP_OS(应用镜像 );PURE_OS( 系统镜像);PRIVATE(自定义镜像)。 # 类型:String # 必选:否 #
  • platform-type
  • 按照【镜像平台类型】进行过滤。 # 取值: LINUX_UNIX(Linux/Unix系统);WINDOWS(Windows 系统)。 # 类型:String # 必选:否 #
  • blueprint-name
  • 按照【镜像名称】进行过滤。 # 类型:String # 必选:否 #
  • blueprint-state
  • 按照【镜像状态】进行过滤。 # 类型:String # 必选:否 # 每次请求的 Filters 的上限为 10,Filter.Values 的上限为 5。参数不支持同时指定 BlueprintIds 和 Filters 。 # @type Filters: Array attr_accessor :InstanceId, :Offset, :Limit, :Filters def initialize(instanceid=nil, offset=nil, limit=nil, filters=nil) @InstanceId = instanceid @Offset = offset @Limit = limit @Filters = filters end def deserialize(params) @InstanceId = params['InstanceId'] @Offset = params['Offset'] @Limit = params['Limit'] unless params['Filters'].nil? @Filters = [] params['Filters'].each do |i| filter_tmp = Filter.new filter_tmp.deserialize(i) @Filters << filter_tmp end end end end # DescribeResetInstanceBlueprints返回参数结构体 class DescribeResetInstanceBlueprintsResponse < TencentCloud::Common::AbstractModel # @param TotalCount: 符合条件的镜像数量。 # @type TotalCount: Integer # @param ResetInstanceBlueprintSet: 镜像重置信息列表 # @type ResetInstanceBlueprintSet: Array # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :TotalCount, :ResetInstanceBlueprintSet, :RequestId def initialize(totalcount=nil, resetinstanceblueprintset=nil, requestid=nil) @TotalCount = totalcount @ResetInstanceBlueprintSet = resetinstanceblueprintset @RequestId = requestid end def deserialize(params) @TotalCount = params['TotalCount'] unless params['ResetInstanceBlueprintSet'].nil? @ResetInstanceBlueprintSet = [] params['ResetInstanceBlueprintSet'].each do |i| resetinstanceblueprint_tmp = ResetInstanceBlueprint.new resetinstanceblueprint_tmp.deserialize(i) @ResetInstanceBlueprintSet << resetinstanceblueprint_tmp end end @RequestId = params['RequestId'] end end # DescribeSnapshotsDeniedActions请求参数结构体 class DescribeSnapshotsDeniedActionsRequest < TencentCloud::Common::AbstractModel # @param SnapshotIds: 快照 ID 列表, 可通过 DescribeSnapshots 查询。 # @type SnapshotIds: Array attr_accessor :SnapshotIds def initialize(snapshotids=nil) @SnapshotIds = snapshotids end def deserialize(params) @SnapshotIds = params['SnapshotIds'] end end # DescribeSnapshotsDeniedActions返回参数结构体 class DescribeSnapshotsDeniedActionsResponse < TencentCloud::Common::AbstractModel # @param SnapshotDeniedActionSet: 快照操作限制列表详细信息。 # @type SnapshotDeniedActionSet: Array # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :SnapshotDeniedActionSet, :RequestId def initialize(snapshotdeniedactionset=nil, requestid=nil) @SnapshotDeniedActionSet = snapshotdeniedactionset @RequestId = requestid end def deserialize(params) unless params['SnapshotDeniedActionSet'].nil? @SnapshotDeniedActionSet = [] params['SnapshotDeniedActionSet'].each do |i| snapshotdeniedactions_tmp = SnapshotDeniedActions.new snapshotdeniedactions_tmp.deserialize(i) @SnapshotDeniedActionSet << snapshotdeniedactions_tmp end end @RequestId = params['RequestId'] end end # DescribeSnapshots请求参数结构体 class DescribeSnapshotsRequest < TencentCloud::Common::AbstractModel # @param SnapshotIds: 要查询快照的 ID 列表。 # 参数不支持同时指定 SnapshotIds 和 Filters。 # @type SnapshotIds: Array # @param Filters: 过滤器列表。 #
  • snapshot-id
  • 按照【快照 ID】进行过滤。 # 类型:String # 必选:否 #
  • disk-id
  • 按照【磁盘 ID】进行过滤。 # 类型:String # 必选:否 #
  • snapshot-name
  • 按照【快照名称】进行过滤。 # 类型:String # 必选:否 #
  • instance-id
  • 按照【实例 ID 】进行过滤。 # 类型:String # 必选:否 # 每次请求的 Filters 的上限为 10,Filter.Values 的上限为 5。参数不支持同时指定 SnapshotIds 和 Filters。 # @type Filters: Array # @param Offset: 偏移量,默认为 0。 # @type Offset: Integer # @param Limit: 返回数量,默认为 20,最大值为 100。 # @type Limit: Integer attr_accessor :SnapshotIds, :Filters, :Offset, :Limit def initialize(snapshotids=nil, filters=nil, offset=nil, limit=nil) @SnapshotIds = snapshotids @Filters = filters @Offset = offset @Limit = limit end def deserialize(params) @SnapshotIds = params['SnapshotIds'] unless params['Filters'].nil? @Filters = [] params['Filters'].each do |i| filter_tmp = Filter.new filter_tmp.deserialize(i) @Filters << filter_tmp end end @Offset = params['Offset'] @Limit = params['Limit'] end end # DescribeSnapshots返回参数结构体 class DescribeSnapshotsResponse < TencentCloud::Common::AbstractModel # @param TotalCount: 快照的数量。 # @type TotalCount: Integer # @param SnapshotSet: 快照的详情列表。 # @type SnapshotSet: Array # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :TotalCount, :SnapshotSet, :RequestId def initialize(totalcount=nil, snapshotset=nil, requestid=nil) @TotalCount = totalcount @SnapshotSet = snapshotset @RequestId = requestid end def deserialize(params) @TotalCount = params['TotalCount'] unless params['SnapshotSet'].nil? @SnapshotSet = [] params['SnapshotSet'].each do |i| snapshot_tmp = Snapshot.new snapshot_tmp.deserialize(i) @SnapshotSet << snapshot_tmp end end @RequestId = params['RequestId'] end end # DescribeZones请求参数结构体 class DescribeZonesRequest < TencentCloud::Common::AbstractModel def initialize() end def deserialize(params) end end # DescribeZones返回参数结构体 class DescribeZonesResponse < TencentCloud::Common::AbstractModel # @param TotalCount: 可用区数量 # @type TotalCount: Integer # @param ZoneInfoSet: 可用区详细信息列表 # @type ZoneInfoSet: Array # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :TotalCount, :ZoneInfoSet, :RequestId def initialize(totalcount=nil, zoneinfoset=nil, requestid=nil) @TotalCount = totalcount @ZoneInfoSet = zoneinfoset @RequestId = requestid end def deserialize(params) @TotalCount = params['TotalCount'] unless params['ZoneInfoSet'].nil? @ZoneInfoSet = [] params['ZoneInfoSet'].each do |i| zoneinfo_tmp = ZoneInfo.new zoneinfo_tmp.deserialize(i) @ZoneInfoSet << zoneinfo_tmp end end @RequestId = params['RequestId'] end end # DetachCcn请求参数结构体 class DetachCcnRequest < TencentCloud::Common::AbstractModel # @param CcnId: 云联网实例ID。 # @type CcnId: String attr_accessor :CcnId def initialize(ccnid=nil) @CcnId = ccnid end def deserialize(params) @CcnId = params['CcnId'] end end # DetachCcn返回参数结构体 class DetachCcnResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # DetachDisks请求参数结构体 class DetachDisksRequest < TencentCloud::Common::AbstractModel # @param DiskIds: 云硬盘ID列表。 # @type DiskIds: Array attr_accessor :DiskIds def initialize(diskids=nil) @DiskIds = diskids end def deserialize(params) @DiskIds = params['DiskIds'] end end # DetachDisks返回参数结构体 class DetachDisksResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # DisassociateInstancesKeyPairs请求参数结构体 class DisassociateInstancesKeyPairsRequest < TencentCloud::Common::AbstractModel # @param KeyIds: 密钥对 ID 列表。每次请求批量密钥对的上限为 100。 # @type KeyIds: Array # @param InstanceIds: 实例 ID 列表。每次请求批量实例的上限为 100。可通过[DescribeInstances](https://cloud.tencent.com/document/api/1207/47573)接口返回值中的InstanceId获取。 # @type InstanceIds: Array attr_accessor :KeyIds, :InstanceIds def initialize(keyids=nil, instanceids=nil) @KeyIds = keyids @InstanceIds = instanceids end def deserialize(params) @KeyIds = params['KeyIds'] @InstanceIds = params['InstanceIds'] end end # DisassociateInstancesKeyPairs返回参数结构体 class DisassociateInstancesKeyPairsResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # 套餐折扣详情(仅用于控制台调用询价相关接口返回)。 class DiscountDetail < TencentCloud::Common::AbstractModel # @param TimeSpan: 计费时长。 # @type TimeSpan: Integer # @param TimeUnit: 计费单元。 # @type TimeUnit: String # @param TotalCost: 总价。 # @type TotalCost: Float # @param RealTotalCost: 折后总价。 # @type RealTotalCost: Float # @param Discount: 折扣。 # @type Discount: Integer # @param PolicyDetail: 具体折扣详情。 # @type PolicyDetail: :class:`Tencentcloud::Lighthouse.v20200324.models.PolicyDetail` attr_accessor :TimeSpan, :TimeUnit, :TotalCost, :RealTotalCost, :Discount, :PolicyDetail def initialize(timespan=nil, timeunit=nil, totalcost=nil, realtotalcost=nil, discount=nil, policydetail=nil) @TimeSpan = timespan @TimeUnit = timeunit @TotalCost = totalcost @RealTotalCost = realtotalcost @Discount = discount @PolicyDetail = policydetail end def deserialize(params) @TimeSpan = params['TimeSpan'] @TimeUnit = params['TimeUnit'] @TotalCost = params['TotalCost'] @RealTotalCost = params['RealTotalCost'] @Discount = params['Discount'] unless params['PolicyDetail'].nil? @PolicyDetail = PolicyDetail.new @PolicyDetail.deserialize(params['PolicyDetail']) end end end # 磁盘信息 class Disk < TencentCloud::Common::AbstractModel # @param DiskId: 磁盘ID # @type DiskId: String # @param InstanceId: 实例ID # @type InstanceId: String # @param Zone: 可用区 # @type Zone: String # @param DiskName: 磁盘名称 # @type DiskName: String # @param DiskUsage: 磁盘类型 # @type DiskUsage: String # @param DiskType: 磁盘介质类型 # @type DiskType: String # @param DiskChargeType: 磁盘付费类型 # @type DiskChargeType: String # @param DiskSize: 磁盘大小 # @type DiskSize: Integer # @param RenewFlag: 续费标识 # @type RenewFlag: String # @param DiskState: 磁盘状态 # @type DiskState: String # @param Attached: 磁盘挂载状态 # @type Attached: Boolean # @param DeleteWithInstance: 是否随实例释放 # @type DeleteWithInstance: Boolean # @param LatestOperation: 上一次操作 # @type LatestOperation: String # @param LatestOperationState: 上一次操作状态 # @type LatestOperationState: String # @param LatestOperationRequestId: 上一次请求ID # @type LatestOperationRequestId: String # @param CreatedTime: 创建时间 # @type CreatedTime: String # @param ExpiredTime: 到期时间 # 注意:此字段可能返回 null,表示取不到有效值。 # @type ExpiredTime: String # @param IsolatedTime: 隔离时间 # 注意:此字段可能返回 null,表示取不到有效值。 # @type IsolatedTime: String attr_accessor :DiskId, :InstanceId, :Zone, :DiskName, :DiskUsage, :DiskType, :DiskChargeType, :DiskSize, :RenewFlag, :DiskState, :Attached, :DeleteWithInstance, :LatestOperation, :LatestOperationState, :LatestOperationRequestId, :CreatedTime, :ExpiredTime, :IsolatedTime def initialize(diskid=nil, instanceid=nil, zone=nil, diskname=nil, diskusage=nil, disktype=nil, diskchargetype=nil, disksize=nil, renewflag=nil, diskstate=nil, attached=nil, deletewithinstance=nil, latestoperation=nil, latestoperationstate=nil, latestoperationrequestid=nil, createdtime=nil, expiredtime=nil, isolatedtime=nil) @DiskId = diskid @InstanceId = instanceid @Zone = zone @DiskName = diskname @DiskUsage = diskusage @DiskType = disktype @DiskChargeType = diskchargetype @DiskSize = disksize @RenewFlag = renewflag @DiskState = diskstate @Attached = attached @DeleteWithInstance = deletewithinstance @LatestOperation = latestoperation @LatestOperationState = latestoperationstate @LatestOperationRequestId = latestoperationrequestid @CreatedTime = createdtime @ExpiredTime = expiredtime @IsolatedTime = isolatedtime end def deserialize(params) @DiskId = params['DiskId'] @InstanceId = params['InstanceId'] @Zone = params['Zone'] @DiskName = params['DiskName'] @DiskUsage = params['DiskUsage'] @DiskType = params['DiskType'] @DiskChargeType = params['DiskChargeType'] @DiskSize = params['DiskSize'] @RenewFlag = params['RenewFlag'] @DiskState = params['DiskState'] @Attached = params['Attached'] @DeleteWithInstance = params['DeleteWithInstance'] @LatestOperation = params['LatestOperation'] @LatestOperationState = params['LatestOperationState'] @LatestOperationRequestId = params['LatestOperationRequestId'] @CreatedTime = params['CreatedTime'] @ExpiredTime = params['ExpiredTime'] @IsolatedTime = params['IsolatedTime'] end end # 云硬盘包年包月相关参数设置 class DiskChargePrepaid < TencentCloud::Common::AbstractModel # @param Period: 新购周期。 # @type Period: Integer # @param RenewFlag: 续费标识。 # @type RenewFlag: String # @param TimeUnit: 新购单位. 默认值: "m"。 # @type TimeUnit: String attr_accessor :Period, :RenewFlag, :TimeUnit def initialize(period=nil, renewflag=nil, timeunit=nil) @Period = period @RenewFlag = renewflag @TimeUnit = timeunit end def deserialize(params) @Period = params['Period'] @RenewFlag = params['RenewFlag'] @TimeUnit = params['TimeUnit'] end end # 云硬盘配置 class DiskConfig < TencentCloud::Common::AbstractModel # @param Zone: 可用区。 # @type Zone: String # @param DiskType: 云硬盘类型。 # @type DiskType: String # @param DiskSalesState: 云硬盘可售卖状态。 # @type DiskSalesState: String # @param MaxDiskSize: 最大云硬盘大小。 # @type MaxDiskSize: Integer # @param MinDiskSize: 最小云硬盘大小。 # @type MinDiskSize: Integer # @param DiskStepSize: 云硬盘步长。 # @type DiskStepSize: Integer attr_accessor :Zone, :DiskType, :DiskSalesState, :MaxDiskSize, :MinDiskSize, :DiskStepSize def initialize(zone=nil, disktype=nil, disksalesstate=nil, maxdisksize=nil, mindisksize=nil, diskstepsize=nil) @Zone = zone @DiskType = disktype @DiskSalesState = disksalesstate @MaxDiskSize = maxdisksize @MinDiskSize = mindisksize @DiskStepSize = diskstepsize end def deserialize(params) @Zone = params['Zone'] @DiskType = params['DiskType'] @DiskSalesState = params['DiskSalesState'] @MaxDiskSize = params['MaxDiskSize'] @MinDiskSize = params['MinDiskSize'] @DiskStepSize = params['DiskStepSize'] end end # 磁盘操作限制列表详细信息 class DiskDeniedActions < TencentCloud::Common::AbstractModel # @param DiskId: 云硬盘ID。 # @type DiskId: String # @param DeniedActions: 操作限制列表。 # @type DeniedActions: Array attr_accessor :DiskId, :DeniedActions def initialize(diskid=nil, deniedactions=nil) @DiskId = diskid @DeniedActions = deniedactions end def deserialize(params) @DiskId = params['DiskId'] unless params['DeniedActions'].nil? @DeniedActions = [] params['DeniedActions'].each do |i| deniedaction_tmp = DeniedAction.new deniedaction_tmp.deserialize(i) @DeniedActions << deniedaction_tmp end end end end # 云硬盘价格 class DiskPrice < TencentCloud::Common::AbstractModel # @param OriginalDiskPrice: 云硬盘单价。 # @type OriginalDiskPrice: Float # @param OriginalPrice: 云硬盘总价。 # @type OriginalPrice: Float # @param Discount: 折扣。 # @type Discount: Float # @param DiscountPrice: 折后总价。 # @type DiscountPrice: Float attr_accessor :OriginalDiskPrice, :OriginalPrice, :Discount, :DiscountPrice def initialize(originaldiskprice=nil, originalprice=nil, discount=nil, discountprice=nil) @OriginalDiskPrice = originaldiskprice @OriginalPrice = originalprice @Discount = discount @DiscountPrice = discountprice end def deserialize(params) @OriginalDiskPrice = params['OriginalDiskPrice'] @OriginalPrice = params['OriginalPrice'] @Discount = params['Discount'] @DiscountPrice = params['DiscountPrice'] end end # 可退还云硬盘详细信息 class DiskReturnable < TencentCloud::Common::AbstractModel # @param DiskId: 云硬盘ID。 # @type DiskId: String # @param IsReturnable: 云硬盘是否可退还。 # @type IsReturnable: Boolean # @param ReturnFailCode: 云硬盘退还失败错误码。 # @type ReturnFailCode: Integer # @param ReturnFailMessage: 云硬盘退还失败错误信息。 # @type ReturnFailMessage: String attr_accessor :DiskId, :IsReturnable, :ReturnFailCode, :ReturnFailMessage def initialize(diskid=nil, isreturnable=nil, returnfailcode=nil, returnfailmessage=nil) @DiskId = diskid @IsReturnable = isreturnable @ReturnFailCode = returnfailcode @ReturnFailMessage = returnfailmessage end def deserialize(params) @DiskId = params['DiskId'] @IsReturnable = params['IsReturnable'] @ReturnFailCode = params['ReturnFailCode'] @ReturnFailMessage = params['ReturnFailMessage'] end end # Docker容器创建时的配置 class DockerContainerConfiguration < TencentCloud::Common::AbstractModel # @param ContainerImage: 容器镜像地址 # @type ContainerImage: String # @param ContainerName: 容器名称 # @type ContainerName: String # @param Envs: 环境变量列表 # @type Envs: Array # @param PublishPorts: 容器端口主机端口映射列表 # @type PublishPorts: Array # @param Volumes: 容器加载本地卷列表 # @type Volumes: Array # @param Command: 运行的命令 # @type Command: String attr_accessor :ContainerImage, :ContainerName, :Envs, :PublishPorts, :Volumes, :Command def initialize(containerimage=nil, containername=nil, envs=nil, publishports=nil, volumes=nil, command=nil) @ContainerImage = containerimage @ContainerName = containername @Envs = envs @PublishPorts = publishports @Volumes = volumes @Command = command end def deserialize(params) @ContainerImage = params['ContainerImage'] @ContainerName = params['ContainerName'] unless params['Envs'].nil? @Envs = [] params['Envs'].each do |i| containerenv_tmp = ContainerEnv.new containerenv_tmp.deserialize(i) @Envs << containerenv_tmp end end unless params['PublishPorts'].nil? @PublishPorts = [] params['PublishPorts'].each do |i| dockercontainerpublishport_tmp = DockerContainerPublishPort.new dockercontainerpublishport_tmp.deserialize(i) @PublishPorts << dockercontainerpublishport_tmp end end unless params['Volumes'].nil? @Volumes = [] params['Volumes'].each do |i| dockercontainervolume_tmp = DockerContainerVolume.new dockercontainervolume_tmp.deserialize(i) @Volumes << dockercontainervolume_tmp end end @Command = params['Command'] end end # Docker容器映射的端口 class DockerContainerPublishPort < TencentCloud::Common::AbstractModel # @param HostPort: 主机端口 # @type HostPort: Integer # @param ContainerPort: 容器端口 # @type ContainerPort: Integer # @param Ip: 对外绑定IP,默认0.0.0.0 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Ip: String # @param Protocol: 协议,默认tcp,支持tcp/udp/sctp # 注意:此字段可能返回 null,表示取不到有效值。 # @type Protocol: String attr_accessor :HostPort, :ContainerPort, :Ip, :Protocol def initialize(hostport=nil, containerport=nil, ip=nil, protocol=nil) @HostPort = hostport @ContainerPort = containerport @Ip = ip @Protocol = protocol end def deserialize(params) @HostPort = params['HostPort'] @ContainerPort = params['ContainerPort'] @Ip = params['Ip'] @Protocol = params['Protocol'] end end # Docker容器挂载卷 class DockerContainerVolume < TencentCloud::Common::AbstractModel # @param ContainerPath: 容器路径 # @type ContainerPath: String # @param HostPath: 主机路径 # @type HostPath: String attr_accessor :ContainerPath, :HostPath def initialize(containerpath=nil, hostpath=nil) @ContainerPath = containerpath @HostPath = hostpath end def deserialize(params) @ContainerPath = params['ContainerPath'] @HostPath = params['HostPath'] end end # >描述键值对过滤器,用于条件过滤查询。例如过滤名称等 # > * 若存在多个`Filter`时,`Filter`间的关系为逻辑与(`AND`)关系。 # > * 若同一个`Filter`存在多个`Values`,同一`Filter`下`Values`间的关系为逻辑或(`OR`)关系。 # > # > 以DescribeInstances接口的`Filter`为例。若我们需要查询实例名称(`instance-name`)为test ***并且*** 实例内网IP(`private-ip-address`)为10.10.10.10的实例时,可如下实现: # ``` # Filters.0.Name=instance-name # &Filters.0.Values.0=test # &Filters.1.Name=private-ip-address # &Filters.1.Values.0=10.10.10.10 # ``` class Filter < TencentCloud::Common::AbstractModel # @param Name: 需要过滤的字段。 # @type Name: String # @param Values: 字段的过滤值。 # @type Values: Array attr_accessor :Name, :Values def initialize(name=nil, values=nil) @Name = name @Values = values end def deserialize(params) @Name = params['Name'] @Values = params['Values'] end end # 描述防火墙规则信息。 class FirewallRule < TencentCloud::Common::AbstractModel # @param Protocol: 协议,取值:TCP,UDP,ICMP,ALL。 # @type Protocol: String # @param Port: 端口,取值:ALL,单独的端口,逗号分隔的离散端口,减号分隔的端口范围。 # @type Port: String # @param CidrBlock: 网段或 IP (互斥)。默认为 0.0.0.0/0,表示所有来源。 # @type CidrBlock: String # @param Action: 取值:ACCEPT,DROP。默认为 ACCEPT。 # @type Action: String # @param FirewallRuleDescription: 防火墙规则描述。 # @type FirewallRuleDescription: String attr_accessor :Protocol, :Port, :CidrBlock, :Action, :FirewallRuleDescription def initialize(protocol=nil, port=nil, cidrblock=nil, action=nil, firewallruledescription=nil) @Protocol = protocol @Port = port @CidrBlock = cidrblock @Action = action @FirewallRuleDescription = firewallruledescription end def deserialize(params) @Protocol = params['Protocol'] @Port = params['Port'] @CidrBlock = params['CidrBlock'] @Action = params['Action'] @FirewallRuleDescription = params['FirewallRuleDescription'] end end # 描述防火墙规则详细信息。 class FirewallRuleInfo < TencentCloud::Common::AbstractModel # @param AppType: 应用类型,取值:自定义,HTTP(80),HTTPS(443),Linux登录(22),Windows登录(3389),MySQL(3306),SQL Server(1433),全部TCP,全部UDP,Ping-ICMP,ALL。 # @type AppType: String # @param Protocol: 协议,取值:TCP,UDP,ICMP,ALL。 # @type Protocol: String # @param Port: 端口,取值:ALL,单独的端口,逗号分隔的离散端口,减号分隔的端口范围。 # @type Port: String # @param CidrBlock: 网段或 IP (互斥)。默认为 0.0.0.0/0,表示所有来源。 # @type CidrBlock: String # @param Action: 取值:ACCEPT,DROP。默认为 ACCEPT。 # @type Action: String # @param FirewallRuleDescription: 防火墙规则描述。 # @type FirewallRuleDescription: String attr_accessor :AppType, :Protocol, :Port, :CidrBlock, :Action, :FirewallRuleDescription def initialize(apptype=nil, protocol=nil, port=nil, cidrblock=nil, action=nil, firewallruledescription=nil) @AppType = apptype @Protocol = protocol @Port = port @CidrBlock = cidrblock @Action = action @FirewallRuleDescription = firewallruledescription end def deserialize(params) @AppType = params['AppType'] @Protocol = params['Protocol'] @Port = params['Port'] @CidrBlock = params['CidrBlock'] @Action = params['Action'] @FirewallRuleDescription = params['FirewallRuleDescription'] end end # 描述通用资源配额信息。 class GeneralResourceQuota < TencentCloud::Common::AbstractModel # @param ResourceName: 资源名称。 # @type ResourceName: String # @param ResourceQuotaAvailable: 资源当前可用数量。 # @type ResourceQuotaAvailable: Integer # @param ResourceQuotaTotal: 资源总数量。 # @type ResourceQuotaTotal: Integer attr_accessor :ResourceName, :ResourceQuotaAvailable, :ResourceQuotaTotal def initialize(resourcename=nil, resourcequotaavailable=nil, resourcequotatotal=nil) @ResourceName = resourcename @ResourceQuotaAvailable = resourcequotaavailable @ResourceQuotaTotal = resourcequotatotal end def deserialize(params) @ResourceName = params['ResourceName'] @ResourceQuotaAvailable = params['ResourceQuotaAvailable'] @ResourceQuotaTotal = params['ResourceQuotaTotal'] end end # ImportKeyPair请求参数结构体 class ImportKeyPairRequest < TencentCloud::Common::AbstractModel # @param KeyName: 密钥对名称,可由数字,字母和下划线组成,长度不超过 25 个字符。 # @type KeyName: String # @param PublicKey: 密钥对的公钥内容, OpenSSH RSA 格式。 # @type PublicKey: String attr_accessor :KeyName, :PublicKey def initialize(keyname=nil, publickey=nil) @KeyName = keyname @PublicKey = publickey end def deserialize(params) @KeyName = params['KeyName'] @PublicKey = params['PublicKey'] end end # ImportKeyPair返回参数结构体 class ImportKeyPairResponse < TencentCloud::Common::AbstractModel # @param KeyId: 密钥对 ID。 # @type KeyId: String # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :KeyId, :RequestId def initialize(keyid=nil, requestid=nil) @KeyId = keyid @RequestId = requestid end def deserialize(params) @KeyId = params['KeyId'] @RequestId = params['RequestId'] end end # InquirePriceCreateBlueprint请求参数结构体 class InquirePriceCreateBlueprintRequest < TencentCloud::Common::AbstractModel # @param BlueprintCount: 自定义镜像的个数。默认值为1。 # @type BlueprintCount: Integer attr_accessor :BlueprintCount def initialize(blueprintcount=nil) @BlueprintCount = blueprintcount end def deserialize(params) @BlueprintCount = params['BlueprintCount'] end end # InquirePriceCreateBlueprint返回参数结构体 class InquirePriceCreateBlueprintResponse < TencentCloud::Common::AbstractModel # @param BlueprintPrice: 自定义镜像的价格参数。 # @type BlueprintPrice: :class:`Tencentcloud::Lighthouse.v20200324.models.BlueprintPrice` # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :BlueprintPrice, :RequestId def initialize(blueprintprice=nil, requestid=nil) @BlueprintPrice = blueprintprice @RequestId = requestid end def deserialize(params) unless params['BlueprintPrice'].nil? @BlueprintPrice = BlueprintPrice.new @BlueprintPrice.deserialize(params['BlueprintPrice']) end @RequestId = params['RequestId'] end end # InquirePriceCreateDisks请求参数结构体 class InquirePriceCreateDisksRequest < TencentCloud::Common::AbstractModel # @param DiskSize: 云硬盘大小, 单位: GB。 # @type DiskSize: Integer # @param DiskType: 云硬盘介质类型。取值: "CLOUD_PREMIUM"(高性能云盘), "CLOUD_SSD"(SSD云硬盘)。 # @type DiskType: String # @param DiskChargePrepaid: 新购云硬盘包年包月相关参数设置。 # @type DiskChargePrepaid: :class:`Tencentcloud::Lighthouse.v20200324.models.DiskChargePrepaid` # @param DiskCount: 云硬盘个数, 默认值: 1。 # @type DiskCount: Integer attr_accessor :DiskSize, :DiskType, :DiskChargePrepaid, :DiskCount def initialize(disksize=nil, disktype=nil, diskchargeprepaid=nil, diskcount=nil) @DiskSize = disksize @DiskType = disktype @DiskChargePrepaid = diskchargeprepaid @DiskCount = diskcount end def deserialize(params) @DiskSize = params['DiskSize'] @DiskType = params['DiskType'] unless params['DiskChargePrepaid'].nil? @DiskChargePrepaid = DiskChargePrepaid.new @DiskChargePrepaid.deserialize(params['DiskChargePrepaid']) end @DiskCount = params['DiskCount'] end end # InquirePriceCreateDisks返回参数结构体 class InquirePriceCreateDisksResponse < TencentCloud::Common::AbstractModel # @param DiskPrice: 云硬盘价格。 # @type DiskPrice: :class:`Tencentcloud::Lighthouse.v20200324.models.DiskPrice` # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :DiskPrice, :RequestId def initialize(diskprice=nil, requestid=nil) @DiskPrice = diskprice @RequestId = requestid end def deserialize(params) unless params['DiskPrice'].nil? @DiskPrice = DiskPrice.new @DiskPrice.deserialize(params['DiskPrice']) end @RequestId = params['RequestId'] end end # InquirePriceCreateInstances请求参数结构体 class InquirePriceCreateInstancesRequest < TencentCloud::Common::AbstractModel # @param BundleId: 实例的套餐 ID。 # @type BundleId: String # @param InstanceCount: 创建数量,默认为 1。 # @type InstanceCount: Integer # @param InstanceChargePrepaid: 预付费模式,即包年包月相关参数设置。通过该参数可以指定包年包月实例的购买时长、是否设置自动续费等属性。若指定实例的付费模式为预付费则该参数必传。 # @type InstanceChargePrepaid: :class:`Tencentcloud::Lighthouse.v20200324.models.InstanceChargePrepaid` # @param BlueprintId: 应用镜像 ID,使用收费应用镜像时必填。可通过[DescribeBlueprints](https://cloud.tencent.com/document/product/1207/47689)接口返回值中的BlueprintId获取。 # @type BlueprintId: String attr_accessor :BundleId, :InstanceCount, :InstanceChargePrepaid, :BlueprintId def initialize(bundleid=nil, instancecount=nil, instancechargeprepaid=nil, blueprintid=nil) @BundleId = bundleid @InstanceCount = instancecount @InstanceChargePrepaid = instancechargeprepaid @BlueprintId = blueprintid end def deserialize(params) @BundleId = params['BundleId'] @InstanceCount = params['InstanceCount'] unless params['InstanceChargePrepaid'].nil? @InstanceChargePrepaid = InstanceChargePrepaid.new @InstanceChargePrepaid.deserialize(params['InstanceChargePrepaid']) end @BlueprintId = params['BlueprintId'] end end # InquirePriceCreateInstances返回参数结构体 class InquirePriceCreateInstancesResponse < TencentCloud::Common::AbstractModel # @param Price: 询价信息。 # @type Price: :class:`Tencentcloud::Lighthouse.v20200324.models.Price` # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Price, :RequestId def initialize(price=nil, requestid=nil) @Price = price @RequestId = requestid end def deserialize(params) unless params['Price'].nil? @Price = Price.new @Price.deserialize(params['Price']) end @RequestId = params['RequestId'] end end # InquirePriceRenewDisks请求参数结构体 class InquirePriceRenewDisksRequest < TencentCloud::Common::AbstractModel # @param DiskIds: 云硬盘ID列表。 # @type DiskIds: Array # @param RenewDiskChargePrepaid: 续费云硬盘包年包月相关参数设置。 # @type RenewDiskChargePrepaid: :class:`Tencentcloud::Lighthouse.v20200324.models.RenewDiskChargePrepaid` attr_accessor :DiskIds, :RenewDiskChargePrepaid def initialize(diskids=nil, renewdiskchargeprepaid=nil) @DiskIds = diskids @RenewDiskChargePrepaid = renewdiskchargeprepaid end def deserialize(params) @DiskIds = params['DiskIds'] unless params['RenewDiskChargePrepaid'].nil? @RenewDiskChargePrepaid = RenewDiskChargePrepaid.new @RenewDiskChargePrepaid.deserialize(params['RenewDiskChargePrepaid']) end end end # InquirePriceRenewDisks返回参数结构体 class InquirePriceRenewDisksResponse < TencentCloud::Common::AbstractModel # @param DiskPrice: 云硬盘价格。 # @type DiskPrice: :class:`Tencentcloud::Lighthouse.v20200324.models.DiskPrice` # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :DiskPrice, :RequestId def initialize(diskprice=nil, requestid=nil) @DiskPrice = diskprice @RequestId = requestid end def deserialize(params) unless params['DiskPrice'].nil? @DiskPrice = DiskPrice.new @DiskPrice.deserialize(params['DiskPrice']) end @RequestId = params['RequestId'] end end # InquirePriceRenewInstances请求参数结构体 class InquirePriceRenewInstancesRequest < TencentCloud::Common::AbstractModel # @param InstanceIds: 待续费的实例。 # @type InstanceIds: Array # @param InstanceChargePrepaid: 预付费模式,即包年包月相关参数设置。通过该参数可以指定包年包月实例的购买时长、是否设置自动续费等属性。若指定实例的付费模式为预付费则该参数必传。 # @type InstanceChargePrepaid: :class:`Tencentcloud::Lighthouse.v20200324.models.InstanceChargePrepaid` # @param RenewDataDisk: 是否续费数据盘 # @type RenewDataDisk: Boolean # @param AlignInstanceExpiredTime: 数据盘是否对齐实例到期时间 # @type AlignInstanceExpiredTime: Boolean attr_accessor :InstanceIds, :InstanceChargePrepaid, :RenewDataDisk, :AlignInstanceExpiredTime def initialize(instanceids=nil, instancechargeprepaid=nil, renewdatadisk=nil, aligninstanceexpiredtime=nil) @InstanceIds = instanceids @InstanceChargePrepaid = instancechargeprepaid @RenewDataDisk = renewdatadisk @AlignInstanceExpiredTime = aligninstanceexpiredtime end def deserialize(params) @InstanceIds = params['InstanceIds'] unless params['InstanceChargePrepaid'].nil? @InstanceChargePrepaid = InstanceChargePrepaid.new @InstanceChargePrepaid.deserialize(params['InstanceChargePrepaid']) end @RenewDataDisk = params['RenewDataDisk'] @AlignInstanceExpiredTime = params['AlignInstanceExpiredTime'] end end # InquirePriceRenewInstances返回参数结构体 class InquirePriceRenewInstancesResponse < TencentCloud::Common::AbstractModel # @param Price: 询价信息。 # @type Price: :class:`Tencentcloud::Lighthouse.v20200324.models.Price` # @param DataDiskPriceSet: 数据盘价格信息列表。 # 注意:此字段可能返回 null,表示取不到有效值。 # @type DataDiskPriceSet: Array # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :Price, :DataDiskPriceSet, :RequestId def initialize(price=nil, datadiskpriceset=nil, requestid=nil) @Price = price @DataDiskPriceSet = datadiskpriceset @RequestId = requestid end def deserialize(params) unless params['Price'].nil? @Price = Price.new @Price.deserialize(params['Price']) end unless params['DataDiskPriceSet'].nil? @DataDiskPriceSet = [] params['DataDiskPriceSet'].each do |i| datadiskprice_tmp = DataDiskPrice.new datadiskprice_tmp.deserialize(i) @DataDiskPriceSet << datadiskprice_tmp end end @RequestId = params['RequestId'] end end # 描述了实例信息。 class Instance < TencentCloud::Common::AbstractModel # @param InstanceId: 实例 ID。 # @type InstanceId: String # @param BundleId: 套餐 ID。 # @type BundleId: String # @param BlueprintId: 镜像 ID。 # @type BlueprintId: String # @param CPU: 实例的 CPU 核数,单位:核。 # @type CPU: Integer # @param Memory: 实例内存容量,单位:GB 。 # @type Memory: Integer # @param InstanceName: 实例名称。 # @type InstanceName: String # @param InstanceChargeType: 实例计费模式。取值范围: # PREPAID:表示预付费,即包年包月。 # @type InstanceChargeType: String # @param SystemDisk: 实例系统盘信息。 # @type SystemDisk: :class:`Tencentcloud::Lighthouse.v20200324.models.SystemDisk` # @param PrivateAddresses: 实例主网卡的内网 IP。 # 注意:此字段可能返回 空,表示取不到有效值。 # @type PrivateAddresses: Array # @param PublicAddresses: 实例主网卡的公网 IP。 # 注意:此字段可能返回 空,表示取不到有效值。 # @type PublicAddresses: Array # @param InternetAccessible: 实例带宽信息。 # @type InternetAccessible: :class:`Tencentcloud::Lighthouse.v20200324.models.InternetAccessible` # @param RenewFlag: 自动续费标识。取值范围: # NOTIFY_AND_MANUAL_RENEW:表示通知即将过期,但不自动续费 # NOTIFY_AND_AUTO_RENEW:表示通知即将过期,而且自动续费 。 # @type RenewFlag: String # @param LoginSettings: 实例登录设置。 # @type LoginSettings: :class:`Tencentcloud::Lighthouse.v20200324.models.LoginSettings` # @param InstanceState: 实例状态。取值范围: #
  • PENDING:表示创建中
  • LAUNCH_FAILED:表示创建失败
  • RUNNING:表示运行中
  • STOPPED:表示关机
  • STARTING:表示开机中
  • STOPPING:表示关机中
  • REBOOTING:表示重启中
  • SHUTDOWN:表示停止待销毁
  • TERMINATING:表示销毁中
  • # @type InstanceState: String # @param Uuid: 实例全局唯一 ID。 # @type Uuid: String # @param LatestOperation: 实例的最新操作。例:StopInstances、ResetInstance。注意:此字段可能返回 空值,表示取不到有效值。 # @type LatestOperation: String # @param LatestOperationState: 实例的最新操作状态。取值范围: # SUCCESS:表示操作成功 # OPERATING:表示操作执行中 # FAILED:表示操作失败 # 注意:此字段可能返回 空值,表示取不到有效值。 # @type LatestOperationState: String # @param LatestOperationRequestId: 实例最新操作的唯一请求 ID。 # 注意:此字段可能返回 空值,表示取不到有效值。 # @type LatestOperationRequestId: String # @param IsolatedTime: 隔离时间。按照 ISO8601 标准表示,并且使用 UTC 时间。 # 格式为: YYYY-MM-DDThh:mm:ssZ。 # 注意:此字段可能返回 null,表示取不到有效值。 # @type IsolatedTime: String # @param CreatedTime: 创建时间。按照 ISO8601 标准表示,并且使用 UTC 时间。 # 格式为: YYYY-MM-DDThh:mm:ssZ。 # 注意:此字段可能返回 null,表示取不到有效值。 # @type CreatedTime: String # @param ExpiredTime: 到期时间。按照 ISO8601 标准表示,并且使用 UTC 时间。 # 格式为: YYYY-MM-DDThh:mm:ssZ 。 # 注意:此字段可能返回 null,表示取不到有效值。 # @type ExpiredTime: String # @param PlatformType: 操作系统平台类型,如 LINUX_UNIX、WINDOWS。 # @type PlatformType: String # @param Platform: 操作系统平台。 # @type Platform: String # @param OsName: 操作系统名称。 # @type OsName: String # @param Zone: 可用区。 # @type Zone: String # @param Tags: 实例绑定的标签列表。 # @type Tags: Array attr_accessor :InstanceId, :BundleId, :BlueprintId, :CPU, :Memory, :InstanceName, :InstanceChargeType, :SystemDisk, :PrivateAddresses, :PublicAddresses, :InternetAccessible, :RenewFlag, :LoginSettings, :InstanceState, :Uuid, :LatestOperation, :LatestOperationState, :LatestOperationRequestId, :IsolatedTime, :CreatedTime, :ExpiredTime, :PlatformType, :Platform, :OsName, :Zone, :Tags def initialize(instanceid=nil, bundleid=nil, blueprintid=nil, cpu=nil, memory=nil, instancename=nil, instancechargetype=nil, systemdisk=nil, privateaddresses=nil, publicaddresses=nil, internetaccessible=nil, renewflag=nil, loginsettings=nil, instancestate=nil, uuid=nil, latestoperation=nil, latestoperationstate=nil, latestoperationrequestid=nil, isolatedtime=nil, createdtime=nil, expiredtime=nil, platformtype=nil, platform=nil, osname=nil, zone=nil, tags=nil) @InstanceId = instanceid @BundleId = bundleid @BlueprintId = blueprintid @CPU = cpu @Memory = memory @InstanceName = instancename @InstanceChargeType = instancechargetype @SystemDisk = systemdisk @PrivateAddresses = privateaddresses @PublicAddresses = publicaddresses @InternetAccessible = internetaccessible @RenewFlag = renewflag @LoginSettings = loginsettings @InstanceState = instancestate @Uuid = uuid @LatestOperation = latestoperation @LatestOperationState = latestoperationstate @LatestOperationRequestId = latestoperationrequestid @IsolatedTime = isolatedtime @CreatedTime = createdtime @ExpiredTime = expiredtime @PlatformType = platformtype @Platform = platform @OsName = osname @Zone = zone @Tags = tags end def deserialize(params) @InstanceId = params['InstanceId'] @BundleId = params['BundleId'] @BlueprintId = params['BlueprintId'] @CPU = params['CPU'] @Memory = params['Memory'] @InstanceName = params['InstanceName'] @InstanceChargeType = params['InstanceChargeType'] unless params['SystemDisk'].nil? @SystemDisk = SystemDisk.new @SystemDisk.deserialize(params['SystemDisk']) end @PrivateAddresses = params['PrivateAddresses'] @PublicAddresses = params['PublicAddresses'] unless params['InternetAccessible'].nil? @InternetAccessible = InternetAccessible.new @InternetAccessible.deserialize(params['InternetAccessible']) end @RenewFlag = params['RenewFlag'] unless params['LoginSettings'].nil? @LoginSettings = LoginSettings.new @LoginSettings.deserialize(params['LoginSettings']) end @InstanceState = params['InstanceState'] @Uuid = params['Uuid'] @LatestOperation = params['LatestOperation'] @LatestOperationState = params['LatestOperationState'] @LatestOperationRequestId = params['LatestOperationRequestId'] @IsolatedTime = params['IsolatedTime'] @CreatedTime = params['CreatedTime'] @ExpiredTime = params['ExpiredTime'] @PlatformType = params['PlatformType'] @Platform = params['Platform'] @OsName = params['OsName'] @Zone = params['Zone'] unless params['Tags'].nil? @Tags = [] params['Tags'].each do |i| tag_tmp = Tag.new tag_tmp.deserialize(i) @Tags << tag_tmp end end end end # 描述了实例的计费模式 class InstanceChargePrepaid < TencentCloud::Common::AbstractModel # @param Period: 购买实例的时长,单位:月。取值范围:1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 24, 36, 48, 60。 # @type Period: Integer # @param RenewFlag: 自动续费标识。取值范围:
  • NOTIFY_AND_AUTO_RENEW:通知过期且自动续费
  • NOTIFY_AND_MANUAL_RENEW:通知过期不自动续费,用户需要手动续费
  • DISABLE_NOTIFY_AND_AUTO_RENEW:不自动续费,且不通知

    默认取值:NOTIFY_AND_MANUAL_RENEW。若该参数指定为NOTIFY_AND_AUTO_RENEW,在账户余额充足的情况下,实例到期后将按月自动续费。 # @type RenewFlag: String attr_accessor :Period, :RenewFlag def initialize(period=nil, renewflag=nil) @Period = period @RenewFlag = renewflag end def deserialize(params) @Period = params['Period'] @RenewFlag = params['RenewFlag'] end end # 实例操作限制列表。 class InstanceDeniedActions < TencentCloud::Common::AbstractModel # @param InstanceId: 实例 ID。 # 注意:此字段可能返回 null,表示取不到有效值。 # @type InstanceId: String # @param DeniedActions: 操作限制列表。 # @type DeniedActions: Array attr_accessor :InstanceId, :DeniedActions def initialize(instanceid=nil, deniedactions=nil) @InstanceId = instanceid @DeniedActions = deniedactions end def deserialize(params) @InstanceId = params['InstanceId'] unless params['DeniedActions'].nil? @DeniedActions = [] params['DeniedActions'].each do |i| deniedaction_tmp = DeniedAction.new deniedaction_tmp.deserialize(i) @DeniedActions << deniedaction_tmp end end end end # 关于Lighthouse Instance实例的价格信息 class InstancePrice < TencentCloud::Common::AbstractModel # @param OriginalBundlePrice: 套餐单价原价。 # @type OriginalBundlePrice: Float # @param OriginalPrice: 原价。 # @type OriginalPrice: Float # @param Discount: 折扣。 # @type Discount: Integer # @param DiscountPrice: 折后价。 # @type DiscountPrice: Float attr_accessor :OriginalBundlePrice, :OriginalPrice, :Discount, :DiscountPrice def initialize(originalbundleprice=nil, originalprice=nil, discount=nil, discountprice=nil) @OriginalBundlePrice = originalbundleprice @OriginalPrice = originalprice @Discount = discount @DiscountPrice = discountprice end def deserialize(params) @OriginalBundlePrice = params['OriginalBundlePrice'] @OriginalPrice = params['OriginalPrice'] @Discount = params['Discount'] @DiscountPrice = params['DiscountPrice'] end end # 实例可退还信息。 class InstanceReturnable < TencentCloud::Common::AbstractModel # @param InstanceId: 实例 ID。 # @type InstanceId: String # @param IsReturnable: 实例是否可退还。 # @type IsReturnable: Boolean # @param ReturnFailCode: 实例退还失败错误码。 # @type ReturnFailCode: Integer # @param ReturnFailMessage: 实例退还失败错误信息。 # @type ReturnFailMessage: String attr_accessor :InstanceId, :IsReturnable, :ReturnFailCode, :ReturnFailMessage def initialize(instanceid=nil, isreturnable=nil, returnfailcode=nil, returnfailmessage=nil) @InstanceId = instanceid @IsReturnable = isreturnable @ReturnFailCode = returnfailcode @ReturnFailMessage = returnfailmessage end def deserialize(params) @InstanceId = params['InstanceId'] @IsReturnable = params['IsReturnable'] @ReturnFailCode = params['ReturnFailCode'] @ReturnFailMessage = params['ReturnFailMessage'] end end # 实例流量包详情 class InstanceTrafficPackage < TencentCloud::Common::AbstractModel # @param InstanceId: 实例ID。 # @type InstanceId: String # @param TrafficPackageSet: 流量包详情列表。 # @type TrafficPackageSet: Array attr_accessor :InstanceId, :TrafficPackageSet def initialize(instanceid=nil, trafficpackageset=nil) @InstanceId = instanceid @TrafficPackageSet = trafficpackageset end def deserialize(params) @InstanceId = params['InstanceId'] unless params['TrafficPackageSet'].nil? @TrafficPackageSet = [] params['TrafficPackageSet'].each do |i| trafficpackage_tmp = TrafficPackage.new trafficpackage_tmp.deserialize(i) @TrafficPackageSet << trafficpackage_tmp end end end end # 描述了启动配置创建实例的公网可访问性,声明了实例的公网使用计费模式,最大带宽等。 class InternetAccessible < TencentCloud::Common::AbstractModel # @param InternetChargeType: 网络计费类型,取值范围: #
  • 按流量包付费:TRAFFIC_POSTPAID_BY_HOUR
  • #
  • 按带宽付费: BANDWIDTH_POSTPAID_BY_HOUR
  • # @type InternetChargeType: String # @param InternetMaxBandwidthOut: 公网出带宽上限,单位:Mbps。 # @type InternetMaxBandwidthOut: Integer # @param PublicIpAssigned: 是否分配公网 IP。 # @type PublicIpAssigned: Boolean attr_accessor :InternetChargeType, :InternetMaxBandwidthOut, :PublicIpAssigned def initialize(internetchargetype=nil, internetmaxbandwidthout=nil, publicipassigned=nil) @InternetChargeType = internetchargetype @InternetMaxBandwidthOut = internetmaxbandwidthout @PublicIpAssigned = publicipassigned end def deserialize(params) @InternetChargeType = params['InternetChargeType'] @InternetMaxBandwidthOut = params['InternetMaxBandwidthOut'] @PublicIpAssigned = params['PublicIpAssigned'] end end # 描述密钥对信息。 class KeyPair < TencentCloud::Common::AbstractModel # @param KeyId: 密钥对 ID ,是密钥对的唯一标识。 # @type KeyId: String # @param KeyName: 密钥对名称。 # @type KeyName: String # @param PublicKey: 密钥对的纯文本公钥。 # @type PublicKey: String # @param AssociatedInstanceIds: 密钥对关联的实例 ID 列表。 # 注意:此字段可能返回 null,表示取不到有效值。 # @type AssociatedInstanceIds: Array # @param CreatedTime: 创建时间。按照 ISO8601 标准表示,并且使用 UTC 时间。格式为:YYYY-MM-DDThh:mm:ssZ # 注意:此字段可能返回 null,表示取不到有效值。 # @type CreatedTime: String # @param PrivateKey: 密钥对私钥。 # 注意:此字段可能返回 null,表示取不到有效值。 # @type PrivateKey: String attr_accessor :KeyId, :KeyName, :PublicKey, :AssociatedInstanceIds, :CreatedTime, :PrivateKey def initialize(keyid=nil, keyname=nil, publickey=nil, associatedinstanceids=nil, createdtime=nil, privatekey=nil) @KeyId = keyid @KeyName = keyname @PublicKey = publickey @AssociatedInstanceIds = associatedinstanceids @CreatedTime = createdtime @PrivateKey = privatekey end def deserialize(params) @KeyId = params['KeyId'] @KeyName = params['KeyName'] @PublicKey = params['PublicKey'] @AssociatedInstanceIds = params['AssociatedInstanceIds'] @CreatedTime = params['CreatedTime'] @PrivateKey = params['PrivateKey'] end end # 实例密码登录配置信息。 class LoginConfiguration < TencentCloud::Common::AbstractModel def initialize() end def deserialize(params) end end # 描述了实例登录相关配置与信息。 class LoginSettings < TencentCloud::Common::AbstractModel # @param KeyIds: 密钥 ID 列表。关联密钥后,就可以通过对应的私钥来访问实例。注意:此字段可能返回 [],表示取不到有效值。 # @type KeyIds: Array attr_accessor :KeyIds def initialize(keyids=nil) @KeyIds = keyids end def deserialize(params) @KeyIds = params['KeyIds'] end end # ModifyBlueprintAttribute请求参数结构体 class ModifyBlueprintAttributeRequest < TencentCloud::Common::AbstractModel # @param BlueprintId: 镜像 ID。可通过[DescribeBlueprints](https://cloud.tencent.com/document/product/1207/47689)接口返回值中的BlueprintId获取。 # @type BlueprintId: String # @param BlueprintName: 设置新的镜像名称。最大长度60。 # @type BlueprintName: String # @param Description: 设置新的镜像描述。最大长度60。 # @type Description: String attr_accessor :BlueprintId, :BlueprintName, :Description def initialize(blueprintid=nil, blueprintname=nil, description=nil) @BlueprintId = blueprintid @BlueprintName = blueprintname @Description = description end def deserialize(params) @BlueprintId = params['BlueprintId'] @BlueprintName = params['BlueprintName'] @Description = params['Description'] end end # ModifyBlueprintAttribute返回参数结构体 class ModifyBlueprintAttributeResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # 描述了实例可变更的套餐。 class ModifyBundle < TencentCloud::Common::AbstractModel # @param ModifyPrice: 更改实例套餐后需要补的差价。 # @type ModifyPrice: :class:`Tencentcloud::Lighthouse.v20200324.models.Price` # @param ModifyBundleState: 变更套餐状态。取值: #
  • SOLD_OUT:套餐售罄
  • #
  • AVAILABLE:支持套餐变更
  • #
  • UNAVAILABLE:暂不支持套餐变更
  • # @type ModifyBundleState: String # @param Bundle: 套餐信息。 # @type Bundle: :class:`Tencentcloud::Lighthouse.v20200324.models.Bundle` attr_accessor :ModifyPrice, :ModifyBundleState, :Bundle def initialize(modifyprice=nil, modifybundlestate=nil, bundle=nil) @ModifyPrice = modifyprice @ModifyBundleState = modifybundlestate @Bundle = bundle end def deserialize(params) unless params['ModifyPrice'].nil? @ModifyPrice = Price.new @ModifyPrice.deserialize(params['ModifyPrice']) end @ModifyBundleState = params['ModifyBundleState'] unless params['Bundle'].nil? @Bundle = Bundle.new @Bundle.deserialize(params['Bundle']) end end end # ModifyDisksAttribute请求参数结构体 class ModifyDisksAttributeRequest < TencentCloud::Common::AbstractModel # @param DiskIds: 云硬盘ID列表。 # @type DiskIds: Array # @param DiskName: 云硬盘名称。 # @type DiskName: String attr_accessor :DiskIds, :DiskName def initialize(diskids=nil, diskname=nil) @DiskIds = diskids @DiskName = diskname end def deserialize(params) @DiskIds = params['DiskIds'] @DiskName = params['DiskName'] end end # ModifyDisksAttribute返回参数结构体 class ModifyDisksAttributeResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # ModifyDisksRenewFlag请求参数结构体 class ModifyDisksRenewFlagRequest < TencentCloud::Common::AbstractModel # @param DiskIds: 云硬盘ID列表。 # @type DiskIds: Array # @param RenewFlag: 续费标识。 # @type RenewFlag: String attr_accessor :DiskIds, :RenewFlag def initialize(diskids=nil, renewflag=nil) @DiskIds = diskids @RenewFlag = renewflag end def deserialize(params) @DiskIds = params['DiskIds'] @RenewFlag = params['RenewFlag'] end end # ModifyDisksRenewFlag返回参数结构体 class ModifyDisksRenewFlagResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # ModifyFirewallRuleDescription请求参数结构体 class ModifyFirewallRuleDescriptionRequest < TencentCloud::Common::AbstractModel # @param InstanceId: 实例 ID。 # @type InstanceId: String # @param FirewallRule: 防火墙规则。 # @type FirewallRule: :class:`Tencentcloud::Lighthouse.v20200324.models.FirewallRule` # @param FirewallVersion: 防火墙当前版本。用户每次更新防火墙规则时版本会自动加1,防止规则已过期,不填不考虑冲突。 # @type FirewallVersion: Integer attr_accessor :InstanceId, :FirewallRule, :FirewallVersion def initialize(instanceid=nil, firewallrule=nil, firewallversion=nil) @InstanceId = instanceid @FirewallRule = firewallrule @FirewallVersion = firewallversion end def deserialize(params) @InstanceId = params['InstanceId'] unless params['FirewallRule'].nil? @FirewallRule = FirewallRule.new @FirewallRule.deserialize(params['FirewallRule']) end @FirewallVersion = params['FirewallVersion'] end end # ModifyFirewallRuleDescription返回参数结构体 class ModifyFirewallRuleDescriptionResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # ModifyFirewallRules请求参数结构体 class ModifyFirewallRulesRequest < TencentCloud::Common::AbstractModel # @param InstanceId: 实例 ID。 # @type InstanceId: String # @param FirewallRules: 防火墙规则列表。 # @type FirewallRules: Array # @param FirewallVersion: 防火墙当前版本。用户每次更新防火墙规则时版本会自动加1,防止规则已过期,不填不考虑冲突。 # @type FirewallVersion: Integer attr_accessor :InstanceId, :FirewallRules, :FirewallVersion def initialize(instanceid=nil, firewallrules=nil, firewallversion=nil) @InstanceId = instanceid @FirewallRules = firewallrules @FirewallVersion = firewallversion end def deserialize(params) @InstanceId = params['InstanceId'] unless params['FirewallRules'].nil? @FirewallRules = [] params['FirewallRules'].each do |i| firewallrule_tmp = FirewallRule.new firewallrule_tmp.deserialize(i) @FirewallRules << firewallrule_tmp end end @FirewallVersion = params['FirewallVersion'] end end # ModifyFirewallRules返回参数结构体 class ModifyFirewallRulesResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # ModifyInstancesAttribute请求参数结构体 class ModifyInstancesAttributeRequest < TencentCloud::Common::AbstractModel # @param InstanceIds: 实例 ID 列表。每次请求批量实例的上限为 100。可通过[DescribeInstances](https://cloud.tencent.com/document/api/1207/47573)接口返回值中的InstanceId获取。 # @type InstanceIds: Array # @param InstanceName: 实例名称。可任意命名,但不得超过 60 个字符。 # @type InstanceName: String attr_accessor :InstanceIds, :InstanceName def initialize(instanceids=nil, instancename=nil) @InstanceIds = instanceids @InstanceName = instancename end def deserialize(params) @InstanceIds = params['InstanceIds'] @InstanceName = params['InstanceName'] end end # ModifyInstancesAttribute返回参数结构体 class ModifyInstancesAttributeResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # ModifyInstancesLoginKeyPairAttribute请求参数结构体 class ModifyInstancesLoginKeyPairAttributeRequest < TencentCloud::Common::AbstractModel # @param InstanceIds: 实例 ID 列表。每次请求批量实例的上限为 100。 # @type InstanceIds: Array # @param PermitLogin: 是否允许使用默认密钥对登录,YES:允许登录;NO:禁止登录 # @type PermitLogin: String attr_accessor :InstanceIds, :PermitLogin def initialize(instanceids=nil, permitlogin=nil) @InstanceIds = instanceids @PermitLogin = permitlogin end def deserialize(params) @InstanceIds = params['InstanceIds'] @PermitLogin = params['PermitLogin'] end end # ModifyInstancesLoginKeyPairAttribute返回参数结构体 class ModifyInstancesLoginKeyPairAttributeResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # ModifyInstancesRenewFlag请求参数结构体 class ModifyInstancesRenewFlagRequest < TencentCloud::Common::AbstractModel # @param InstanceIds: 实例 ID 列表。每次请求批量实例的上限为 100。可通过[DescribeInstances](https://cloud.tencent.com/document/api/1207/47573)接口返回值中的InstanceId获取。 # @type InstanceIds: Array # @param RenewFlag: 自动续费标识。取值范围:
  • NOTIFY_AND_AUTO_RENEW:通知过期且自动续费
  • NOTIFY_AND_MANUAL_RENEW:通知过期不自动续费
  • DISABLE_NOTIFY_AND_MANUAL_RENEW:不通知过期不自动续费

    若该参数指定为NOTIFY_AND_AUTO_RENEW,在账户余额充足的情况下,实例到期后将按月自动续费。 # @type RenewFlag: String attr_accessor :InstanceIds, :RenewFlag def initialize(instanceids=nil, renewflag=nil) @InstanceIds = instanceids @RenewFlag = renewflag end def deserialize(params) @InstanceIds = params['InstanceIds'] @RenewFlag = params['RenewFlag'] end end # ModifyInstancesRenewFlag返回参数结构体 class ModifyInstancesRenewFlagResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # ModifySnapshotAttribute请求参数结构体 class ModifySnapshotAttributeRequest < TencentCloud::Common::AbstractModel # @param SnapshotId: 快照 ID, 可通过 DescribeSnapshots 查询。 # @type SnapshotId: String # @param SnapshotName: 新的快照名称,最长为 60 个字符。 # @type SnapshotName: String attr_accessor :SnapshotId, :SnapshotName def initialize(snapshotid=nil, snapshotname=nil) @SnapshotId = snapshotid @SnapshotName = snapshotname end def deserialize(params) @SnapshotId = params['SnapshotId'] @SnapshotName = params['SnapshotName'] end end # ModifySnapshotAttribute返回参数结构体 class ModifySnapshotAttributeResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # 折扣详情信息。 class PolicyDetail < TencentCloud::Common::AbstractModel # @param UserDiscount: 用户折扣。 # @type UserDiscount: Integer # @param CommonDiscount: 公共折扣。 # @type CommonDiscount: Integer # @param FinalDiscount: 最终折扣。 # @type FinalDiscount: Integer attr_accessor :UserDiscount, :CommonDiscount, :FinalDiscount def initialize(userdiscount=nil, commondiscount=nil, finaldiscount=nil) @UserDiscount = userdiscount @CommonDiscount = commondiscount @FinalDiscount = finaldiscount end def deserialize(params) @UserDiscount = params['UserDiscount'] @CommonDiscount = params['CommonDiscount'] @FinalDiscount = params['FinalDiscount'] end end # 价格信息 class Price < TencentCloud::Common::AbstractModel # @param InstancePrice: 实例价格。 # @type InstancePrice: :class:`Tencentcloud::Lighthouse.v20200324.models.InstancePrice` attr_accessor :InstancePrice def initialize(instanceprice=nil) @InstancePrice = instanceprice end def deserialize(params) unless params['InstancePrice'].nil? @InstancePrice = InstancePrice.new @InstancePrice.deserialize(params['InstancePrice']) end end end # RebootInstances请求参数结构体 class RebootInstancesRequest < TencentCloud::Common::AbstractModel # @param InstanceIds: 实例 ID 列表。每次请求批量实例的上限为 100。可通过[DescribeInstances](https://cloud.tencent.com/document/api/1207/47573)接口返回值中的InstanceId获取。 # @type InstanceIds: Array attr_accessor :InstanceIds def initialize(instanceids=nil) @InstanceIds = instanceids end def deserialize(params) @InstanceIds = params['InstanceIds'] end end # RebootInstances返回参数结构体 class RebootInstancesResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # 描述地域信息。 class RegionInfo < TencentCloud::Common::AbstractModel # @param Region: 地域名称,例如,ap-guangzhou。 # @type Region: String # @param RegionName: 地域描述,例如,华南地区(广州)。 # @type RegionName: String # @param RegionState: 地域是否可用状态,取值仅为AVAILABLE。 # @type RegionState: String # @param IsChinaMainland: 是否中国大陆地域 # @type IsChinaMainland: Boolean attr_accessor :Region, :RegionName, :RegionState, :IsChinaMainland def initialize(region=nil, regionname=nil, regionstate=nil, ischinamainland=nil) @Region = region @RegionName = regionname @RegionState = regionstate @IsChinaMainland = ischinamainland end def deserialize(params) @Region = params['Region'] @RegionName = params['RegionName'] @RegionState = params['RegionState'] @IsChinaMainland = params['IsChinaMainland'] end end # 续费云硬盘包年包月相关参数设置 class RenewDiskChargePrepaid < TencentCloud::Common::AbstractModel # @param Period: 新购周期。 # @type Period: Integer # @param RenewFlag: 续费标识。 # @type RenewFlag: String # @param TimeUnit: 周期单位. 默认值: "m"。 # @type TimeUnit: String # @param CurInstanceDeadline: 当前实例到期时间。 # @type CurInstanceDeadline: String attr_accessor :Period, :RenewFlag, :TimeUnit, :CurInstanceDeadline def initialize(period=nil, renewflag=nil, timeunit=nil, curinstancedeadline=nil) @Period = period @RenewFlag = renewflag @TimeUnit = timeunit @CurInstanceDeadline = curinstancedeadline end def deserialize(params) @Period = params['Period'] @RenewFlag = params['RenewFlag'] @TimeUnit = params['TimeUnit'] @CurInstanceDeadline = params['CurInstanceDeadline'] end end # ResetAttachCcn请求参数结构体 class ResetAttachCcnRequest < TencentCloud::Common::AbstractModel # @param CcnId: 云联网实例ID。 # @type CcnId: String attr_accessor :CcnId def initialize(ccnid=nil) @CcnId = ccnid end def deserialize(params) @CcnId = params['CcnId'] end end # ResetAttachCcn返回参数结构体 class ResetAttachCcnResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # 描述了镜像重置信息 class ResetInstanceBlueprint < TencentCloud::Common::AbstractModel # @param BlueprintInfo: 镜像详细信息 # @type BlueprintInfo: :class:`Tencentcloud::Lighthouse.v20200324.models.Blueprint` # @param IsResettable: 实例镜像是否可重置为目标镜像 # @type IsResettable: Boolean # @param NonResettableMessage: 不可重置信息.当镜像可重置时为"" # @type NonResettableMessage: String attr_accessor :BlueprintInfo, :IsResettable, :NonResettableMessage def initialize(blueprintinfo=nil, isresettable=nil, nonresettablemessage=nil) @BlueprintInfo = blueprintinfo @IsResettable = isresettable @NonResettableMessage = nonresettablemessage end def deserialize(params) unless params['BlueprintInfo'].nil? @BlueprintInfo = Blueprint.new @BlueprintInfo.deserialize(params['BlueprintInfo']) end @IsResettable = params['IsResettable'] @NonResettableMessage = params['NonResettableMessage'] end end # ResetInstance请求参数结构体 class ResetInstanceRequest < TencentCloud::Common::AbstractModel # @param InstanceId: 实例 ID。可通过[DescribeInstances](https://cloud.tencent.com/document/api/1207/47573)接口返回值中的InstanceId获取。 # @type InstanceId: String # @param BlueprintId: 镜像 ID。可通过[DescribeBlueprints](https://cloud.tencent.com/document/product/1207/47689)接口返回值中的BlueprintId获取。 # @type BlueprintId: String attr_accessor :InstanceId, :BlueprintId def initialize(instanceid=nil, blueprintid=nil) @InstanceId = instanceid @BlueprintId = blueprintid end def deserialize(params) @InstanceId = params['InstanceId'] @BlueprintId = params['BlueprintId'] end end # ResetInstance返回参数结构体 class ResetInstanceResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # ResetInstancesPassword请求参数结构体 class ResetInstancesPasswordRequest < TencentCloud::Common::AbstractModel # @param InstanceIds: 实例 ID 列表。每次请求批量实例的上限为 100。 # @type InstanceIds: Array # @param Password: 实例登录密码。不同操作系统类型密码复杂度限制不一样,具体如下: # `LINUX_UNIX` 实例密码必须 8-30 位,推荐使用 12 位以上密码,不能以“/”开头,至少包含以下字符中的三种不同字符,字符种类:
  • 小写字母:[a-z]
  • 大写字母:[A-Z]
  • 数字:0-9
  • 特殊字符: ()\`~!@#$%^&\*-+=\_|{}[]:;'<>,.?/
  • # `WINDOWS` 实例密码必须 12-30 位,不能以“/”开头且不包括用户名,至少包含以下字符中的三种不同字符
  • 小写字母:[a-z]
  • 大写字母:[A-Z]
  • 数字: 0-9
  • 特殊字符:()\`~!@#$%^&\*-+=\_|{}[]:;' <>,.?/
  • 如果实例即包含 `LINUX_UNIX` 实例又包含 `WINDOWS` 实例,则密码复杂度限制按照 `WINDOWS` 实例的限制。 # @type Password: String # @param UserName: 待重置密码的实例操作系统用户名。不得超过 64 个字符。 # @type UserName: String attr_accessor :InstanceIds, :Password, :UserName def initialize(instanceids=nil, password=nil, username=nil) @InstanceIds = instanceids @Password = password @UserName = username end def deserialize(params) @InstanceIds = params['InstanceIds'] @Password = params['Password'] @UserName = params['UserName'] end end # ResetInstancesPassword返回参数结构体 class ResetInstancesPasswordResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # 描述了快照相关信息。 class Snapshot < TencentCloud::Common::AbstractModel # @param SnapshotId: 快照 ID。 # @type SnapshotId: String # @param DiskUsage: 创建此快照的磁盘类型。取值:
  • SYSTEM_DISK:系统盘
  • # @type DiskUsage: String # @param DiskId: 创建此快照的磁盘 ID。 # @type DiskId: String # @param DiskSize: 创建此快照的磁盘大小,单位 GB。 # @type DiskSize: Integer # @param SnapshotName: 快照名称,用户自定义的快照别名。 # @type SnapshotName: String # @param SnapshotState: 快照的状态。取值范围: #
  • NORMAL:正常
  • #
  • CREATING:创建中
  • #
  • ROLLBACKING:回滚中。
  • # @type SnapshotState: String # @param Percent: 创建或回滚快照进度百分比,成功后此字段取值为 100。 # @type Percent: Integer # @param LatestOperation: 快照的最新操作,只有创建、回滚快照时记录。 # 取值如 CreateInstanceSnapshot,RollbackInstanceSnapshot。 # 注意:此字段可能返回 null,表示取不到有效值。 # @type LatestOperation: String # @param LatestOperationState: 快照的最新操作状态,只有创建、回滚快照时记录。 # 取值范围: #
  • SUCCESS:表示操作成功
  • #
  • OPERATING:表示操作执行中
  • #
  • FAILED:表示操作失败
  • # 注意:此字段可能返回 null,表示取不到有效值。 # @type LatestOperationState: String # @param LatestOperationRequestId: 快照最新操作的唯一请求 ID,只有创建、回滚快照时记录。 # 注意:此字段可能返回 null,表示取不到有效值。 # @type LatestOperationRequestId: String # @param CreatedTime: 快照的创建时间。 # @type CreatedTime: String attr_accessor :SnapshotId, :DiskUsage, :DiskId, :DiskSize, :SnapshotName, :SnapshotState, :Percent, :LatestOperation, :LatestOperationState, :LatestOperationRequestId, :CreatedTime def initialize(snapshotid=nil, diskusage=nil, diskid=nil, disksize=nil, snapshotname=nil, snapshotstate=nil, percent=nil, latestoperation=nil, latestoperationstate=nil, latestoperationrequestid=nil, createdtime=nil) @SnapshotId = snapshotid @DiskUsage = diskusage @DiskId = diskid @DiskSize = disksize @SnapshotName = snapshotname @SnapshotState = snapshotstate @Percent = percent @LatestOperation = latestoperation @LatestOperationState = latestoperationstate @LatestOperationRequestId = latestoperationrequestid @CreatedTime = createdtime end def deserialize(params) @SnapshotId = params['SnapshotId'] @DiskUsage = params['DiskUsage'] @DiskId = params['DiskId'] @DiskSize = params['DiskSize'] @SnapshotName = params['SnapshotName'] @SnapshotState = params['SnapshotState'] @Percent = params['Percent'] @LatestOperation = params['LatestOperation'] @LatestOperationState = params['LatestOperationState'] @LatestOperationRequestId = params['LatestOperationRequestId'] @CreatedTime = params['CreatedTime'] end end # 快照操作限制列表。 class SnapshotDeniedActions < TencentCloud::Common::AbstractModel # @param SnapshotId: 快照 ID。 # @type SnapshotId: String # @param DeniedActions: 操作限制列表。 # @type DeniedActions: Array attr_accessor :SnapshotId, :DeniedActions def initialize(snapshotid=nil, deniedactions=nil) @SnapshotId = snapshotid @DeniedActions = deniedactions end def deserialize(params) @SnapshotId = params['SnapshotId'] unless params['DeniedActions'].nil? @DeniedActions = [] params['DeniedActions'].each do |i| deniedaction_tmp = DeniedAction.new deniedaction_tmp.deserialize(i) @DeniedActions << deniedaction_tmp end end end end # 描述镜像软件信息。 class Software < TencentCloud::Common::AbstractModel # @param Name: 软件名称。 # @type Name: String # @param Version: 软件版本。 # @type Version: String # @param ImageUrl: 软件图片 URL。 # @type ImageUrl: String # @param InstallDir: 软件安装目录。 # @type InstallDir: String # @param DetailSet: 软件详情列表。 # @type DetailSet: Array attr_accessor :Name, :Version, :ImageUrl, :InstallDir, :DetailSet def initialize(name=nil, version=nil, imageurl=nil, installdir=nil, detailset=nil) @Name = name @Version = version @ImageUrl = imageurl @InstallDir = installdir @DetailSet = detailset end def deserialize(params) @Name = params['Name'] @Version = params['Version'] @ImageUrl = params['ImageUrl'] @InstallDir = params['InstallDir'] unless params['DetailSet'].nil? @DetailSet = [] params['DetailSet'].each do |i| softwaredetail_tmp = SoftwareDetail.new softwaredetail_tmp.deserialize(i) @DetailSet << softwaredetail_tmp end end end end # 描述镜像软件详细信息。 class SoftwareDetail < TencentCloud::Common::AbstractModel # @param Key: 详情唯一键。 # @type Key: String # @param Title: 详情标题。 # @type Title: String # @param Value: 详情值。 # @type Value: String attr_accessor :Key, :Title, :Value def initialize(key=nil, title=nil, value=nil) @Key = key @Title = title @Value = value end def deserialize(params) @Key = params['Key'] @Title = params['Title'] @Value = params['Value'] end end # StartInstances请求参数结构体 class StartInstancesRequest < TencentCloud::Common::AbstractModel # @param InstanceIds: 实例 ID 列表。每次请求批量实例的上限为 100。可通过[DescribeInstances](https://cloud.tencent.com/document/api/1207/47573)接口返回值中的InstanceId获取。 # @type InstanceIds: Array attr_accessor :InstanceIds def initialize(instanceids=nil) @InstanceIds = instanceids end def deserialize(params) @InstanceIds = params['InstanceIds'] end end # StartInstances返回参数结构体 class StartInstancesResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # StopInstances请求参数结构体 class StopInstancesRequest < TencentCloud::Common::AbstractModel # @param InstanceIds: 实例 ID 列表。每次请求批量实例的上限为 100。可通过[DescribeInstances](https://cloud.tencent.com/document/api/1207/47573)接口返回值中的InstanceId获取。 # @type InstanceIds: Array attr_accessor :InstanceIds def initialize(instanceids=nil) @InstanceIds = instanceids end def deserialize(params) @InstanceIds = params['InstanceIds'] end end # StopInstances返回参数结构体 class StopInstancesResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # 描述了操作系统所在块设备即系统盘的信息。 class SystemDisk < TencentCloud::Common::AbstractModel # @param DiskType: 系统盘类型。 # 取值范围: #
  • LOCAL_BASIC:本地硬盘
  • LOCAL_SSD:本地 SSD 硬盘
  • CLOUD_BASIC:普通云硬盘
  • CLOUD_SSD:SSD 云硬盘
  • CLOUD_PREMIUM:高性能云硬盘
  • # @type DiskType: String # @param DiskSize: 系统盘大小,单位:GB。 # @type DiskSize: Integer # @param DiskId: 系统盘ID。 # 注意:此字段可能返回 null,表示取不到有效值。 # @type DiskId: String attr_accessor :DiskType, :DiskSize, :DiskId def initialize(disktype=nil, disksize=nil, diskid=nil) @DiskType = disktype @DiskSize = disksize @DiskId = diskid end def deserialize(params) @DiskType = params['DiskType'] @DiskSize = params['DiskSize'] @DiskId = params['DiskId'] end end # 标签 class Tag < TencentCloud::Common::AbstractModel # @param Key: 标签键 # @type Key: String # @param Value: 标签值 # @type Value: String attr_accessor :Key, :Value def initialize(key=nil, value=nil) @Key = key @Value = value end def deserialize(params) @Key = params['Key'] @Value = params['Value'] end end # TerminateDisks请求参数结构体 class TerminateDisksRequest < TencentCloud::Common::AbstractModel # @param DiskIds: 云硬盘ID列表。 # @type DiskIds: Array attr_accessor :DiskIds def initialize(diskids=nil) @DiskIds = diskids end def deserialize(params) @DiskIds = params['DiskIds'] end end # TerminateDisks返回参数结构体 class TerminateDisksResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # TerminateInstances请求参数结构体 class TerminateInstancesRequest < TencentCloud::Common::AbstractModel # @param InstanceIds: 实例ID列表。可通过[DescribeInstances](https://cloud.tencent.com/document/api/1207/47573)接口返回值中的InstanceId获取。 # @type InstanceIds: Array attr_accessor :InstanceIds def initialize(instanceids=nil) @InstanceIds = instanceids end def deserialize(params) @InstanceIds = params['InstanceIds'] end end # TerminateInstances返回参数结构体 class TerminateInstancesResponse < TencentCloud::Common::AbstractModel # @param RequestId: 唯一请求 ID,每次请求都会返回。定位问题时需要提供该次请求的 RequestId。 # @type RequestId: String attr_accessor :RequestId def initialize(requestid=nil) @RequestId = requestid end def deserialize(params) @RequestId = params['RequestId'] end end # 流量包详情 class TrafficPackage < TencentCloud::Common::AbstractModel # @param TrafficPackageId: 流量包ID。 # @type TrafficPackageId: String # @param TrafficUsed: 流量包生效周期内已使用流量,单位字节。 # @type TrafficUsed: Integer # @param TrafficPackageTotal: 流量包生效周期内的总流量,单位字节。 # @type TrafficPackageTotal: Integer # @param TrafficPackageRemaining: 流量包生效周期内的剩余流量,单位字节。 # @type TrafficPackageRemaining: Integer # @param TrafficOverflow: 流量包生效周期内超出流量包额度的流量,单位字节。 # @type TrafficOverflow: Integer # @param StartTime: 流量包生效周期开始时间。按照 ISO8601 标准表示,并且使用 UTC 时间。 # 格式为: YYYY-MM-DDThh:mm:ssZ。 # 注意:此字段可能返回 null,表示取不到有效值。 # @type StartTime: String # @param EndTime: 流量包生效周期结束时间。按照 ISO8601 标准表示,并且使用 UTC 时间。 # 格式为: YYYY-MM-DDThh:mm:ssZ。 # 注意:此字段可能返回 null,表示取不到有效值。 # @type EndTime: String # @param Deadline: 流量包到期时间。按照 ISO8601 标准表示,并且使用 UTC 时间。 # 格式为: YYYY-MM-DDThh:mm:ssZ。 # 注意:此字段可能返回 null,表示取不到有效值。 # @type Deadline: String # @param Status: 流量包状态: #
  • NETWORK_NORMAL:正常
  • #
  • OVERDUE_NETWORK_DISABLED:欠费断网
  • # @type Status: String attr_accessor :TrafficPackageId, :TrafficUsed, :TrafficPackageTotal, :TrafficPackageRemaining, :TrafficOverflow, :StartTime, :EndTime, :Deadline, :Status def initialize(trafficpackageid=nil, trafficused=nil, trafficpackagetotal=nil, trafficpackageremaining=nil, trafficoverflow=nil, starttime=nil, endtime=nil, deadline=nil, status=nil) @TrafficPackageId = trafficpackageid @TrafficUsed = trafficused @TrafficPackageTotal = trafficpackagetotal @TrafficPackageRemaining = trafficpackageremaining @TrafficOverflow = trafficoverflow @StartTime = starttime @EndTime = endtime @Deadline = deadline @Status = status end def deserialize(params) @TrafficPackageId = params['TrafficPackageId'] @TrafficUsed = params['TrafficUsed'] @TrafficPackageTotal = params['TrafficPackageTotal'] @TrafficPackageRemaining = params['TrafficPackageRemaining'] @TrafficOverflow = params['TrafficOverflow'] @StartTime = params['StartTime'] @EndTime = params['EndTime'] @Deadline = params['Deadline'] @Status = params['Status'] end end # 可用区详细信息 class ZoneInfo < TencentCloud::Common::AbstractModel # @param Zone: 可用区 # @type Zone: String # @param ZoneName: 可用区中文名称 # @type ZoneName: String # @param InstanceDisplayLabel: 实例购买页可用区展示标签 # @type InstanceDisplayLabel: String attr_accessor :Zone, :ZoneName, :InstanceDisplayLabel def initialize(zone=nil, zonename=nil, instancedisplaylabel=nil) @Zone = zone @ZoneName = zonename @InstanceDisplayLabel = instancedisplaylabel end def deserialize(params) @Zone = params['Zone'] @ZoneName = params['ZoneName'] @InstanceDisplayLabel = params['InstanceDisplayLabel'] end end end end end