## # This code was generated by # \ / _ _ _| _ _ # | (_)\/(_)(_|\/| |(/_ v1.0.0 # / / # # frozen_string_literal: true module Twilio module REST class Taskrouter < Domain class V1 < Version class WorkspaceContext < InstanceContext class TaskContext < InstanceContext class ReservationList < ListResource ## # Initialize the ReservationList # @param [Version] version Version that contains the resource # @param [String] workspace_sid The SID of the Workspace that this task is # contained within. # @param [String] task_sid The SID of the reserved Task resource. # @return [ReservationList] ReservationList def initialize(version, workspace_sid: nil, task_sid: nil) super(version) # Path Solution @solution = {workspace_sid: workspace_sid, task_sid: task_sid} @uri = "/Workspaces/#{@solution[:workspace_sid]}/Tasks/#{@solution[:task_sid]}/Reservations" end ## # Lists ReservationInstance records from the API as a list. # Unlike stream(), this operation is eager and will load `limit` records into # memory before returning. # @param [reservation.Status] reservation_status Returns the list of reservations # for a task with a specified ReservationStatus. Can be: `pending`, `accepted`, # `rejected`, or `timeout`. # @param [Integer] limit Upper limit for the number of records to return. stream() # guarantees to never return more than limit. Default is no limit # @param [Integer] page_size Number of records to fetch per request, when # not set will use the default value of 50 records. If no page_size is defined # but a limit is defined, stream() will attempt to read the limit with the most # efficient page size, i.e. min(limit, 1000) # @return [Array] Array of up to limit results def list(reservation_status: :unset, limit: nil, page_size: nil) self.stream(reservation_status: reservation_status, limit: limit, page_size: page_size).entries end ## # Streams ReservationInstance records from the API as an Enumerable. # This operation lazily loads records as efficiently as possible until the limit # is reached. # @param [reservation.Status] reservation_status Returns the list of reservations # for a task with a specified ReservationStatus. Can be: `pending`, `accepted`, # `rejected`, or `timeout`. # @param [Integer] limit Upper limit for the number of records to return. stream() # guarantees to never return more than limit. Default is no limit. # @param [Integer] page_size Number of records to fetch per request, when # not set will use the default value of 50 records. If no page_size is defined # but a limit is defined, stream() will attempt to read the limit with the most # efficient page size, i.e. min(limit, 1000) # @return [Enumerable] Enumerable that will yield up to limit results def stream(reservation_status: :unset, limit: nil, page_size: nil) limits = @version.read_limits(limit, page_size) page = self.page(reservation_status: reservation_status, page_size: limits[:page_size], ) @version.stream(page, limit: limits[:limit], page_limit: limits[:page_limit]) end ## # When passed a block, yields ReservationInstance records from the API. # This operation lazily loads records as efficiently as possible until the limit # is reached. def each limits = @version.read_limits page = self.page(page_size: limits[:page_size], ) @version.stream(page, limit: limits[:limit], page_limit: limits[:page_limit]).each {|x| yield x} end ## # Retrieve a single page of ReservationInstance records from the API. # Request is executed immediately. # @param [reservation.Status] reservation_status Returns the list of reservations # for a task with a specified ReservationStatus. Can be: `pending`, `accepted`, # `rejected`, or `timeout`. # @param [String] page_token PageToken provided by the API # @param [Integer] page_number Page Number, this value is simply for client state # @param [Integer] page_size Number of records to return, defaults to 50 # @return [Page] Page of ReservationInstance def page(reservation_status: :unset, page_token: :unset, page_number: :unset, page_size: :unset) params = Twilio::Values.of({ 'ReservationStatus' => reservation_status, 'PageToken' => page_token, 'Page' => page_number, 'PageSize' => page_size, }) response = @version.page( 'GET', @uri, params ) ReservationPage.new(@version, response, @solution) end ## # Retrieve a single page of ReservationInstance records from the API. # Request is executed immediately. # @param [String] target_url API-generated URL for the requested results page # @return [Page] Page of ReservationInstance def get_page(target_url) response = @version.domain.request( 'GET', target_url ) ReservationPage.new(@version, response, @solution) end ## # Provide a user friendly representation def to_s '#' end end class ReservationPage < Page ## # Initialize the ReservationPage # @param [Version] version Version that contains the resource # @param [Response] response Response from the API # @param [Hash] solution Path solution for the resource # @return [ReservationPage] ReservationPage def initialize(version, response, solution) super(version, response) # Path Solution @solution = solution end ## # Build an instance of ReservationInstance # @param [Hash] payload Payload response from the API # @return [ReservationInstance] ReservationInstance def get_instance(payload) ReservationInstance.new( @version, payload, workspace_sid: @solution[:workspace_sid], task_sid: @solution[:task_sid], ) end ## # Provide a user friendly representation def to_s '' end end class ReservationContext < InstanceContext ## # Initialize the ReservationContext # @param [Version] version Version that contains the resource # @param [String] workspace_sid The SID of the Workspace with the TaskReservation # resource to fetch. # @param [String] task_sid The SID of the reserved Task resource with the # TaskReservation resource to fetch. # @param [String] sid The SID of the TaskReservation resource to fetch. # @return [ReservationContext] ReservationContext def initialize(version, workspace_sid, task_sid, sid) super(version) # Path Solution @solution = {workspace_sid: workspace_sid, task_sid: task_sid, sid: sid, } @uri = "/Workspaces/#{@solution[:workspace_sid]}/Tasks/#{@solution[:task_sid]}/Reservations/#{@solution[:sid]}" end ## # Fetch a ReservationInstance # @return [ReservationInstance] Fetched ReservationInstance def fetch params = Twilio::Values.of({}) payload = @version.fetch( 'GET', @uri, params, ) ReservationInstance.new( @version, payload, workspace_sid: @solution[:workspace_sid], task_sid: @solution[:task_sid], sid: @solution[:sid], ) end ## # Update the ReservationInstance # @param [reservation.Status] reservation_status The new status of the # reservation. Can be: `pending`, `accepted`, `rejected`, or `timeout`. # @param [String] worker_activity_sid The new worker activity SID if rejecting a # reservation. # @param [String] instruction The assignment instruction for reservation. # @param [String] dequeue_post_work_activity_sid The SID of the Activity resource # to start after executing a Dequeue instruction. # @param [String] dequeue_from The Caller ID of the call to the worker when # executing a Dequeue instruction. # @param [String] dequeue_record Whether to record both legs of a call when # executing a Dequeue instruction or which leg to record. # @param [String] dequeue_timeout Timeout for call when executing a Dequeue # instruction. # @param [String] dequeue_to The Contact URI of the worker when executing a # Dequeue instruction. Can be the URI of the Twilio Client, the SIP URI for # Programmable SIP, or the [E.164](https://www.twilio.com/docs/glossary/what-e164) # formatted phone number, depending on the destination. # @param [String] dequeue_status_callback_url The Callback URL for completed call # event when executing a Dequeue instruction. # @param [String] call_from The Caller ID of the outbound call when executing a # Call instruction. # @param [String] call_record Whether to record both legs of a call when executing # a Call instruction or which leg to record. # @param [String] call_timeout Timeout for call when executing a Call instruction. # @param [String] call_to The Contact URI of the worker when executing a Call # instruction. Can be the URI of the Twilio Client, the SIP URI for Programmable # SIP, or the [E.164](https://www.twilio.com/docs/glossary/what-e164) formatted # phone number, depending on the destination. # @param [String] call_url TwiML URI executed on answering the worker's leg as a # result of the Call instruction. # @param [String] call_status_callback_url The URL to call for the completed call # event when executing a Call instruction. # @param [Boolean] call_accept Whether to accept a reservation when executing a # Call instruction. # @param [String] redirect_call_sid The Call SID of the call parked in the queue # when executing a Redirect instruction. # @param [Boolean] redirect_accept Whether the reservation should be accepted when # executing a Redirect instruction. # @param [String] redirect_url TwiML URI to redirect the call to when executing # the Redirect instruction. # @param [String] to The Contact URI of the worker when executing a Conference # instruction. Can be the URI of the Twilio Client, the SIP URI for Programmable # SIP, or the [E.164](https://www.twilio.com/docs/glossary/what-e164) formatted # phone number, depending on the destination. # @param [String] from The Caller ID of the call to the worker when executing a # Conference instruction. # @param [String] status_callback The URL we should call using the # `status_callback_method` to send status information to your application. # @param [String] status_callback_method The HTTP method we should use to call # `status_callback`. Can be: `POST` or `GET` and the default is `POST`. # @param [reservation.CallStatus] status_callback_event The call progress events # that we will send to `status_callback`. Can be: `initiated`, `ringing`, # `answered`, or `completed`. # @param [String] timeout Timeout for call when executing a Conference # instruction. # @param [Boolean] record Whether to record the participant and their conferences, # including the time between conferences. The default is `false`. # @param [Boolean] muted Whether the agent is muted in the conference. The default # is `false`. # @param [String] beep Whether to play a notification beep when the participant # joins or when to play a beep. Can be: `true`, `false`, `onEnter`, or `onExit`. # The default value is `true`. # @param [Boolean] start_conference_on_enter Whether to start the conference when # the participant joins, if it has not already started. The default is `true`. If # `false` and the conference has not started, the participant is muted and hears # background music until another participant starts the conference. # @param [Boolean] end_conference_on_exit Whether to end the conference when the # agent leaves. # @param [String] wait_url The URL we should call using the `wait_method` for the # music to play while participants are waiting for the conference to start. The # default value is the URL of our standard hold music. [Learn more about hold # music](https://www.twilio.com/labs/twimlets/holdmusic). # @param [String] wait_method The HTTP method we should use to call `wait_url`. # Can be `GET` or `POST` and the default is `POST`. When using a static audio # file, this should be `GET` so that we can cache the file. # @param [Boolean] early_media Whether to allow an agent to hear the state of the # outbound call, including ringing or disconnect messages. The default is `true`. # @param [String] max_participants The maximum number of participants in the # conference. Can be a positive integer from `2` to `250`. The default value is # `250`. # @param [String] conference_status_callback The URL we should call using the # `conference_status_callback_method` when the conference events in # `conference_status_callback_event` occur. Only the value set by the first # participant to join the conference is used. Subsequent # `conference_status_callback` values are ignored. # @param [String] conference_status_callback_method The HTTP method we should use # to call `conference_status_callback`. Can be: `GET` or `POST` and defaults to # `POST`. # @param [reservation.ConferenceEvent] conference_status_callback_event The # conference status events that we will send to `conference_status_callback`. Can # be: `start`, `end`, `join`, `leave`, `mute`, `hold`, `speaker`. # @param [String] conference_record Whether to record the conference the # participant is joining or when to record the conference. Can be: `true`, # `false`, `record-from-start`, and `do-not-record`. The default value is `false`. # @param [String] conference_trim How to trim the leading and trailing silence # from your recorded conference audio files. Can be: `trim-silence` or # `do-not-trim` and defaults to `trim-silence`. # @param [String] recording_channels The recording channels for the final # recording. Can be: `mono` or `dual` and the default is `mono`. # @param [String] recording_status_callback The URL that we should call using the # `recording_status_callback_method` when the recording status changes. # @param [String] recording_status_callback_method The HTTP method we should use # when we call `recording_status_callback`. Can be: `GET` or `POST` and defaults # to `POST`. # @param [String] conference_recording_status_callback The URL we should call # using the `conference_recording_status_callback_method` when the conference # recording is available. # @param [String] conference_recording_status_callback_method The HTTP method we # should use to call `conference_recording_status_callback`. Can be: `GET` or # `POST` and defaults to `POST`. # @param [String] region The # [region](https://support.twilio.com/hc/en-us/articles/223132167-How-global-low-latency-routing-and-region-selection-work-for-conferences-and-Client-calls) where we should mix the recorded audio. Can be:`us1`, `ie1`, `de1`, `sg1`, `br1`, `au1`, or `jp1`. # @param [String] sip_auth_username The SIP username used for authentication. # @param [String] sip_auth_password The SIP password for authentication. # @param [String] dequeue_status_callback_event The Call progress events sent via # webhooks as a result of a Dequeue instruction. # @param [String] post_work_activity_sid The new worker activity SID after # executing a Conference instruction. # @param [reservation.SupervisorMode] supervisor_mode The Supervisor mode when # executing the Supervise instruction. # @param [String] supervisor The Supervisor SID/URI when executing the Supervise # instruction. # @param [Boolean] end_conference_on_customer_exit Whether to end the conference # when the customer leaves. # @param [Boolean] beep_on_customer_entrance Whether to play a notification beep # when the customer joins. # @return [ReservationInstance] Updated ReservationInstance def update(reservation_status: :unset, worker_activity_sid: :unset, instruction: :unset, dequeue_post_work_activity_sid: :unset, dequeue_from: :unset, dequeue_record: :unset, dequeue_timeout: :unset, dequeue_to: :unset, dequeue_status_callback_url: :unset, call_from: :unset, call_record: :unset, call_timeout: :unset, call_to: :unset, call_url: :unset, call_status_callback_url: :unset, call_accept: :unset, redirect_call_sid: :unset, redirect_accept: :unset, redirect_url: :unset, to: :unset, from: :unset, status_callback: :unset, status_callback_method: :unset, status_callback_event: :unset, timeout: :unset, record: :unset, muted: :unset, beep: :unset, start_conference_on_enter: :unset, end_conference_on_exit: :unset, wait_url: :unset, wait_method: :unset, early_media: :unset, max_participants: :unset, conference_status_callback: :unset, conference_status_callback_method: :unset, conference_status_callback_event: :unset, conference_record: :unset, conference_trim: :unset, recording_channels: :unset, recording_status_callback: :unset, recording_status_callback_method: :unset, conference_recording_status_callback: :unset, conference_recording_status_callback_method: :unset, region: :unset, sip_auth_username: :unset, sip_auth_password: :unset, dequeue_status_callback_event: :unset, post_work_activity_sid: :unset, supervisor_mode: :unset, supervisor: :unset, end_conference_on_customer_exit: :unset, beep_on_customer_entrance: :unset) data = Twilio::Values.of({ 'ReservationStatus' => reservation_status, 'WorkerActivitySid' => worker_activity_sid, 'Instruction' => instruction, 'DequeuePostWorkActivitySid' => dequeue_post_work_activity_sid, 'DequeueFrom' => dequeue_from, 'DequeueRecord' => dequeue_record, 'DequeueTimeout' => dequeue_timeout, 'DequeueTo' => dequeue_to, 'DequeueStatusCallbackUrl' => dequeue_status_callback_url, 'CallFrom' => call_from, 'CallRecord' => call_record, 'CallTimeout' => call_timeout, 'CallTo' => call_to, 'CallUrl' => call_url, 'CallStatusCallbackUrl' => call_status_callback_url, 'CallAccept' => call_accept, 'RedirectCallSid' => redirect_call_sid, 'RedirectAccept' => redirect_accept, 'RedirectUrl' => redirect_url, 'To' => to, 'From' => from, 'StatusCallback' => status_callback, 'StatusCallbackMethod' => status_callback_method, 'StatusCallbackEvent' => Twilio.serialize_list(status_callback_event) { |e| e }, 'Timeout' => timeout, 'Record' => record, 'Muted' => muted, 'Beep' => beep, 'StartConferenceOnEnter' => start_conference_on_enter, 'EndConferenceOnExit' => end_conference_on_exit, 'WaitUrl' => wait_url, 'WaitMethod' => wait_method, 'EarlyMedia' => early_media, 'MaxParticipants' => max_participants, 'ConferenceStatusCallback' => conference_status_callback, 'ConferenceStatusCallbackMethod' => conference_status_callback_method, 'ConferenceStatusCallbackEvent' => Twilio.serialize_list(conference_status_callback_event) { |e| e }, 'ConferenceRecord' => conference_record, 'ConferenceTrim' => conference_trim, 'RecordingChannels' => recording_channels, 'RecordingStatusCallback' => recording_status_callback, 'RecordingStatusCallbackMethod' => recording_status_callback_method, 'ConferenceRecordingStatusCallback' => conference_recording_status_callback, 'ConferenceRecordingStatusCallbackMethod' => conference_recording_status_callback_method, 'Region' => region, 'SipAuthUsername' => sip_auth_username, 'SipAuthPassword' => sip_auth_password, 'DequeueStatusCallbackEvent' => Twilio.serialize_list(dequeue_status_callback_event) { |e| e }, 'PostWorkActivitySid' => post_work_activity_sid, 'SupervisorMode' => supervisor_mode, 'Supervisor' => supervisor, 'EndConferenceOnCustomerExit' => end_conference_on_customer_exit, 'BeepOnCustomerEntrance' => beep_on_customer_entrance, }) payload = @version.update( 'POST', @uri, data: data, ) ReservationInstance.new( @version, payload, workspace_sid: @solution[:workspace_sid], task_sid: @solution[:task_sid], sid: @solution[:sid], ) end ## # Provide a user friendly representation def to_s context = @solution.map {|k, v| "#{k}: #{v}"}.join(',') "#" end ## # Provide a detailed, user friendly representation def inspect context = @solution.map {|k, v| "#{k}: #{v}"}.join(',') "#" end end class ReservationInstance < InstanceResource ## # Initialize the ReservationInstance # @param [Version] version Version that contains the resource # @param [Hash] payload payload that contains response from Twilio # @param [String] workspace_sid The SID of the Workspace that this task is # contained within. # @param [String] task_sid The SID of the reserved Task resource. # @param [String] sid The SID of the TaskReservation resource to fetch. # @return [ReservationInstance] ReservationInstance def initialize(version, payload, workspace_sid: nil, task_sid: nil, sid: nil) super(version) # Marshaled Properties @properties = { 'account_sid' => payload['account_sid'], 'date_created' => Twilio.deserialize_iso8601_datetime(payload['date_created']), 'date_updated' => Twilio.deserialize_iso8601_datetime(payload['date_updated']), 'reservation_status' => payload['reservation_status'], 'sid' => payload['sid'], 'task_sid' => payload['task_sid'], 'worker_name' => payload['worker_name'], 'worker_sid' => payload['worker_sid'], 'workspace_sid' => payload['workspace_sid'], 'url' => payload['url'], 'links' => payload['links'], } # Context @instance_context = nil @params = { 'workspace_sid' => workspace_sid, 'task_sid' => task_sid, 'sid' => sid || @properties['sid'], } end ## # Generate an instance context for the instance, the context is capable of # performing various actions. All instance actions are proxied to the context # @return [ReservationContext] ReservationContext for this ReservationInstance def context unless @instance_context @instance_context = ReservationContext.new( @version, @params['workspace_sid'], @params['task_sid'], @params['sid'], ) end @instance_context end ## # @return [String] The SID of the Account that created the resource def account_sid @properties['account_sid'] end ## # @return [Time] The ISO 8601 date and time in GMT when the resource was created def date_created @properties['date_created'] end ## # @return [Time] The ISO 8601 date and time in GMT when the resource was last updated def date_updated @properties['date_updated'] end ## # @return [reservation.Status] The current status of the reservation def reservation_status @properties['reservation_status'] end ## # @return [String] The unique string that identifies the resource def sid @properties['sid'] end ## # @return [String] The SID of the reserved Task resource def task_sid @properties['task_sid'] end ## # @return [String] The friendly_name of the Worker that is reserved def worker_name @properties['worker_name'] end ## # @return [String] The SID of the reserved Worker resource def worker_sid @properties['worker_sid'] end ## # @return [String] The SID of the Workspace that this task is contained within. def workspace_sid @properties['workspace_sid'] end ## # @return [String] The absolute URL of the TaskReservation reservation def url @properties['url'] end ## # @return [String] The URLs of related resources def links @properties['links'] end ## # Fetch a ReservationInstance # @return [ReservationInstance] Fetched ReservationInstance def fetch context.fetch end ## # Update the ReservationInstance # @param [reservation.Status] reservation_status The new status of the # reservation. Can be: `pending`, `accepted`, `rejected`, or `timeout`. # @param [String] worker_activity_sid The new worker activity SID if rejecting a # reservation. # @param [String] instruction The assignment instruction for reservation. # @param [String] dequeue_post_work_activity_sid The SID of the Activity resource # to start after executing a Dequeue instruction. # @param [String] dequeue_from The Caller ID of the call to the worker when # executing a Dequeue instruction. # @param [String] dequeue_record Whether to record both legs of a call when # executing a Dequeue instruction or which leg to record. # @param [String] dequeue_timeout Timeout for call when executing a Dequeue # instruction. # @param [String] dequeue_to The Contact URI of the worker when executing a # Dequeue instruction. Can be the URI of the Twilio Client, the SIP URI for # Programmable SIP, or the [E.164](https://www.twilio.com/docs/glossary/what-e164) # formatted phone number, depending on the destination. # @param [String] dequeue_status_callback_url The Callback URL for completed call # event when executing a Dequeue instruction. # @param [String] call_from The Caller ID of the outbound call when executing a # Call instruction. # @param [String] call_record Whether to record both legs of a call when executing # a Call instruction or which leg to record. # @param [String] call_timeout Timeout for call when executing a Call instruction. # @param [String] call_to The Contact URI of the worker when executing a Call # instruction. Can be the URI of the Twilio Client, the SIP URI for Programmable # SIP, or the [E.164](https://www.twilio.com/docs/glossary/what-e164) formatted # phone number, depending on the destination. # @param [String] call_url TwiML URI executed on answering the worker's leg as a # result of the Call instruction. # @param [String] call_status_callback_url The URL to call for the completed call # event when executing a Call instruction. # @param [Boolean] call_accept Whether to accept a reservation when executing a # Call instruction. # @param [String] redirect_call_sid The Call SID of the call parked in the queue # when executing a Redirect instruction. # @param [Boolean] redirect_accept Whether the reservation should be accepted when # executing a Redirect instruction. # @param [String] redirect_url TwiML URI to redirect the call to when executing # the Redirect instruction. # @param [String] to The Contact URI of the worker when executing a Conference # instruction. Can be the URI of the Twilio Client, the SIP URI for Programmable # SIP, or the [E.164](https://www.twilio.com/docs/glossary/what-e164) formatted # phone number, depending on the destination. # @param [String] from The Caller ID of the call to the worker when executing a # Conference instruction. # @param [String] status_callback The URL we should call using the # `status_callback_method` to send status information to your application. # @param [String] status_callback_method The HTTP method we should use to call # `status_callback`. Can be: `POST` or `GET` and the default is `POST`. # @param [reservation.CallStatus] status_callback_event The call progress events # that we will send to `status_callback`. Can be: `initiated`, `ringing`, # `answered`, or `completed`. # @param [String] timeout Timeout for call when executing a Conference # instruction. # @param [Boolean] record Whether to record the participant and their conferences, # including the time between conferences. The default is `false`. # @param [Boolean] muted Whether the agent is muted in the conference. The default # is `false`. # @param [String] beep Whether to play a notification beep when the participant # joins or when to play a beep. Can be: `true`, `false`, `onEnter`, or `onExit`. # The default value is `true`. # @param [Boolean] start_conference_on_enter Whether to start the conference when # the participant joins, if it has not already started. The default is `true`. If # `false` and the conference has not started, the participant is muted and hears # background music until another participant starts the conference. # @param [Boolean] end_conference_on_exit Whether to end the conference when the # agent leaves. # @param [String] wait_url The URL we should call using the `wait_method` for the # music to play while participants are waiting for the conference to start. The # default value is the URL of our standard hold music. [Learn more about hold # music](https://www.twilio.com/labs/twimlets/holdmusic). # @param [String] wait_method The HTTP method we should use to call `wait_url`. # Can be `GET` or `POST` and the default is `POST`. When using a static audio # file, this should be `GET` so that we can cache the file. # @param [Boolean] early_media Whether to allow an agent to hear the state of the # outbound call, including ringing or disconnect messages. The default is `true`. # @param [String] max_participants The maximum number of participants in the # conference. Can be a positive integer from `2` to `250`. The default value is # `250`. # @param [String] conference_status_callback The URL we should call using the # `conference_status_callback_method` when the conference events in # `conference_status_callback_event` occur. Only the value set by the first # participant to join the conference is used. Subsequent # `conference_status_callback` values are ignored. # @param [String] conference_status_callback_method The HTTP method we should use # to call `conference_status_callback`. Can be: `GET` or `POST` and defaults to # `POST`. # @param [reservation.ConferenceEvent] conference_status_callback_event The # conference status events that we will send to `conference_status_callback`. Can # be: `start`, `end`, `join`, `leave`, `mute`, `hold`, `speaker`. # @param [String] conference_record Whether to record the conference the # participant is joining or when to record the conference. Can be: `true`, # `false`, `record-from-start`, and `do-not-record`. The default value is `false`. # @param [String] conference_trim How to trim the leading and trailing silence # from your recorded conference audio files. Can be: `trim-silence` or # `do-not-trim` and defaults to `trim-silence`. # @param [String] recording_channels The recording channels for the final # recording. Can be: `mono` or `dual` and the default is `mono`. # @param [String] recording_status_callback The URL that we should call using the # `recording_status_callback_method` when the recording status changes. # @param [String] recording_status_callback_method The HTTP method we should use # when we call `recording_status_callback`. Can be: `GET` or `POST` and defaults # to `POST`. # @param [String] conference_recording_status_callback The URL we should call # using the `conference_recording_status_callback_method` when the conference # recording is available. # @param [String] conference_recording_status_callback_method The HTTP method we # should use to call `conference_recording_status_callback`. Can be: `GET` or # `POST` and defaults to `POST`. # @param [String] region The # [region](https://support.twilio.com/hc/en-us/articles/223132167-How-global-low-latency-routing-and-region-selection-work-for-conferences-and-Client-calls) where we should mix the recorded audio. Can be:`us1`, `ie1`, `de1`, `sg1`, `br1`, `au1`, or `jp1`. # @param [String] sip_auth_username The SIP username used for authentication. # @param [String] sip_auth_password The SIP password for authentication. # @param [String] dequeue_status_callback_event The Call progress events sent via # webhooks as a result of a Dequeue instruction. # @param [String] post_work_activity_sid The new worker activity SID after # executing a Conference instruction. # @param [reservation.SupervisorMode] supervisor_mode The Supervisor mode when # executing the Supervise instruction. # @param [String] supervisor The Supervisor SID/URI when executing the Supervise # instruction. # @param [Boolean] end_conference_on_customer_exit Whether to end the conference # when the customer leaves. # @param [Boolean] beep_on_customer_entrance Whether to play a notification beep # when the customer joins. # @return [ReservationInstance] Updated ReservationInstance def update(reservation_status: :unset, worker_activity_sid: :unset, instruction: :unset, dequeue_post_work_activity_sid: :unset, dequeue_from: :unset, dequeue_record: :unset, dequeue_timeout: :unset, dequeue_to: :unset, dequeue_status_callback_url: :unset, call_from: :unset, call_record: :unset, call_timeout: :unset, call_to: :unset, call_url: :unset, call_status_callback_url: :unset, call_accept: :unset, redirect_call_sid: :unset, redirect_accept: :unset, redirect_url: :unset, to: :unset, from: :unset, status_callback: :unset, status_callback_method: :unset, status_callback_event: :unset, timeout: :unset, record: :unset, muted: :unset, beep: :unset, start_conference_on_enter: :unset, end_conference_on_exit: :unset, wait_url: :unset, wait_method: :unset, early_media: :unset, max_participants: :unset, conference_status_callback: :unset, conference_status_callback_method: :unset, conference_status_callback_event: :unset, conference_record: :unset, conference_trim: :unset, recording_channels: :unset, recording_status_callback: :unset, recording_status_callback_method: :unset, conference_recording_status_callback: :unset, conference_recording_status_callback_method: :unset, region: :unset, sip_auth_username: :unset, sip_auth_password: :unset, dequeue_status_callback_event: :unset, post_work_activity_sid: :unset, supervisor_mode: :unset, supervisor: :unset, end_conference_on_customer_exit: :unset, beep_on_customer_entrance: :unset) context.update( reservation_status: reservation_status, worker_activity_sid: worker_activity_sid, instruction: instruction, dequeue_post_work_activity_sid: dequeue_post_work_activity_sid, dequeue_from: dequeue_from, dequeue_record: dequeue_record, dequeue_timeout: dequeue_timeout, dequeue_to: dequeue_to, dequeue_status_callback_url: dequeue_status_callback_url, call_from: call_from, call_record: call_record, call_timeout: call_timeout, call_to: call_to, call_url: call_url, call_status_callback_url: call_status_callback_url, call_accept: call_accept, redirect_call_sid: redirect_call_sid, redirect_accept: redirect_accept, redirect_url: redirect_url, to: to, from: from, status_callback: status_callback, status_callback_method: status_callback_method, status_callback_event: status_callback_event, timeout: timeout, record: record, muted: muted, beep: beep, start_conference_on_enter: start_conference_on_enter, end_conference_on_exit: end_conference_on_exit, wait_url: wait_url, wait_method: wait_method, early_media: early_media, max_participants: max_participants, conference_status_callback: conference_status_callback, conference_status_callback_method: conference_status_callback_method, conference_status_callback_event: conference_status_callback_event, conference_record: conference_record, conference_trim: conference_trim, recording_channels: recording_channels, recording_status_callback: recording_status_callback, recording_status_callback_method: recording_status_callback_method, conference_recording_status_callback: conference_recording_status_callback, conference_recording_status_callback_method: conference_recording_status_callback_method, region: region, sip_auth_username: sip_auth_username, sip_auth_password: sip_auth_password, dequeue_status_callback_event: dequeue_status_callback_event, post_work_activity_sid: post_work_activity_sid, supervisor_mode: supervisor_mode, supervisor: supervisor, end_conference_on_customer_exit: end_conference_on_customer_exit, beep_on_customer_entrance: beep_on_customer_entrance, ) end ## # Provide a user friendly representation def to_s values = @params.map{|k, v| "#{k}: #{v}"}.join(" ") "" end ## # Provide a detailed, user friendly representation def inspect values = @properties.map{|k, v| "#{k}: #{v}"}.join(" ") "" end end end end end end end end