require 'openssl'
require 'open-uri'

module DocusignRest

  class Client
    # Define the same set of accessors as the DocusignRest module
    attr_accessor *Configuration::VALID_CONFIG_KEYS
    attr_accessor :docusign_authentication_headers, :acct_id
    attr_accessor :previous_call_log

    def initialize(options={})
      # Merge the config values from the module and those passed to the client.
      merged_options = DocusignRest.options.merge(options)

      # Copy the merged values to this client and ignore those not part
      # of our configuration
      Configuration::VALID_CONFIG_KEYS.each do |key|
        send("#{key}=", merged_options[key])
      end

      # Set up the DocuSign Authentication headers with the values passed from
      # our config block
      if access_token.nil?
        @docusign_authentication_headers = {
          'X-DocuSign-Authentication' => {
            'Username' => username,
            'Password' => password,
            'IntegratorKey' => integrator_key
          }.to_json
        }
      else
        @docusign_authentication_headers = {
          'Authorization' => "Bearer #{access_token}"
        }
      end

      # Set the account_id from the configure block if present, but can't call
      # the instance var @account_id because that'll override the attr_accessor
      # that is automatically configured for the configure block
      @acct_id = account_id

      #initialize the log cache
      @previous_call_log = []
    end


    # Internal: sets the default request headers allowing for user overrides
    # via options[:headers] from within other requests. Additionally injects
    # the X-DocuSign-Authentication header to authorize the request.
    #
    # Client can pass in header options to any given request:
    # headers: {'Some-Key' => 'some/value', 'Another-Key' => 'another/value'}
    #
    # Then we pass them on to this method to merge them with the other
    # required headers
    #
    # Example:
    #
    #   headers(options[:headers])
    #
    # Returns a merged hash of headers overriding the default Accept header if
    # the user passes in a new 'Accept' header key and adds any other
    # user-defined headers along with the X-DocuSign-Authentication headers
    def headers(user_defined_headers={})
      default = {
        'Accept' => 'json' #this seems to get added automatically, so I can probably remove this
      }

      default.merge!(user_defined_headers) if user_defined_headers

      @docusign_authentication_headers.merge(default)
    end


    # Internal: builds a URI based on the configurable endpoint, api_version,
    # and the passed in relative url
    #
    # url - a relative url requiring a leading forward slash
    #
    # Example:
    #
    #   build_uri('/login_information')
    #
    # Returns a parsed URI object
    def build_uri(url)
      URI.parse("#{endpoint}/#{api_version}#{url}")
    end


    # Internal: configures Net:HTTP with some default values that are required
    # for every request to the DocuSign API
    #
    # Returns a configured Net::HTTP object into which a request can be passed
    def initialize_net_http_ssl(uri)
      http = Net::HTTP.new(uri.host, uri.port)

      http.use_ssl = uri.scheme == 'https'

      if defined?(Rails) && Rails.env.test?
        in_rails_test_env = true
      else
        in_rails_test_env = false
      end

      if http.use_ssl? && !in_rails_test_env
        if ca_file
          if File.exists?(ca_file)
            http.ca_file = ca_file
          else
            raise 'Certificate path not found.'
          end
        end

        # Explicitly verifies that the certificate matches the domain.
        # Requires that we use www when calling the production DocuSign API
        http.verify_mode = OpenSSL::SSL::VERIFY_PEER
        http.verify_depth = 5
      else
        http.verify_mode = OpenSSL::SSL::VERIFY_NONE
      end

      http.open_timeout = open_timeout
      http.read_timeout = read_timeout

      http
    end


    # Public: creates an OAuth2 authorization server token endpoint.
    #
    # email    - email of user authenticating
    # password - password of user authenticating
    #
    # Examples:
    #
    #   client = DocusignRest::Client.new
    #   response = client.get_token(integrator_key, 'someone@example.com', 'p@ssw0rd01')
    #
    # Returns:
    #   access_token - Access token information
    #   scope - This should always be "api"
    #   token_type - This should always be "bearer"
    def get_token(integrator_key, email, password)
      content_type = { 'Content-Type' => 'application/x-www-form-urlencoded', 'Accept' => 'application/json' }
      uri = build_uri('/oauth2/token')

      request = Net::HTTP::Post.new(uri.request_uri, content_type)
      request.body = "grant_type=password&client_id=#{integrator_key}&username=#{email}&password=#{password}&scope=api"

      http = initialize_net_http_ssl(uri)
      response = http.request(request)
      generate_log(request, response, uri)
      JSON.parse(response.body)
    end


    # Public: gets info necessary to make additional requests to the DocuSign API
    #
    # options - hash of headers if the client wants to override something
    #
    # Examples:
    #
    #   client = DocusignRest::Client.new
    #   response = client.login_information
    #   puts response.body
    #
    # Returns:
    #   accountId - For the username, password, and integrator_key specified
    #   baseUrl   - The base URL for all future DocuSign requests
    #   email     - The email used when signing up for DocuSign
    #   isDefault - # TODO identify what this is
    #   name      - The account name provided when signing up for DocuSign
    #   userId    - # TODO determine what this is used for, if anything
    #   userName  - Full name provided when signing up for DocuSign
    def get_login_information(options={})
      uri = build_uri('/login_information')
      request = Net::HTTP::Get.new(uri.request_uri, headers(options[:headers]))
      http = initialize_net_http_ssl(uri)
      response = http.request(request)
      generate_log(request, response, uri)
      response
    end


    # Internal: uses the get_login_information method to determine the client's
    # accountId and then caches that value into an instance variable so we
    # don't end up hitting the API for login_information more than once per
    # request.
    #
    # This is used by the rake task in lib/tasks/docusign_task.rake to add
    # the config/initialzers/docusign_rest.rb file with the proper config block
    # which includes the account_id in it. That way we don't require hitting
    # the /login_information URI in normal requests
    #
    # Returns the accountId string
    def get_account_id
      unless acct_id
        response = get_login_information.body
        hashed_response = JSON.parse(response)
        login_accounts = hashed_response['loginAccounts']
        @acct_id ||= login_accounts.first['accountId']
      end

      acct_id
    end


    # Internal: takes in an array of hashes of signers and concatenates all the
    # hashes with commas
    #
    # embedded -  Tells DocuSign if this is an embedded signer which determines
    #             whether or not to deliver emails. Also lets us authenticate
    #             them when they go to do embedded signing. Behind the scenes
    #             this is setting the clientUserId value to the signer's email.
    # name      - The name of the signer
    # email     - The email of the signer
    # role_name - The role name of the signer ('Attorney', 'Client', etc.).
    # tabs      - Array of tab pairs grouped by type (Example type: 'textTabs')
    #             { textTabs: [ { tabLabel: "label", name: "name", value: "value" } ] }
    #
    # Returns a hash of users that need to be embedded in the template to
    # create an envelope
    def get_template_roles(signers)
      template_roles = []
      signers.each_with_index do |signer, index|
        template_role = {
          name:     signer[:name],
          email:    signer[:email],
          roleName: signer[:role_name],
          tabs: {
            textTabs:     get_signer_tabs(signer[:text_tabs]),
            checkboxTabs: get_signer_tabs(signer[:checkbox_tabs]),
            numberTabs:   get_signer_tabs(signer[:number_tabs]),
            radioGroupTabs: get_radio_signer_tabs(signer[:radio_group_tabs]),
            fullNameTabs: get_signer_tabs(signer[:fullname_tabs]),
            dateTabs:     get_signer_tabs(signer[:date_tabs])
          }
        }

        if signer[:email_notification]
          template_role[:emailNotification] = signer[:email_notification]
        end

        template_role['clientUserId'] = (signer[:client_id] || signer[:email]).to_s if signer[:embedded] == true
        template_roles << template_role
      end
      template_roles
    end

    def get_sign_here_tabs(tabs)
      Array(tabs).map do |tab|
        {
          documentId: tab[:document_id],
          recipientId: tab[:recipient_id],
          anchorString: tab[:anchor_string],
          anchorXOffset: tab[:anchorXOffset],
          anchorYOffset: tab[:anchorYOffset]
        }
      end
    end

    # TODO (2014-02-03) jonk => document
    def get_signer_tabs(tabs)
      Array(tabs).map do |tab|
        {
          'tabLabel' => tab[:label],
          'name' => tab[:name],
          'value' => tab[:value],
          'documentId' => tab[:document_id],
          'selected' => tab[:selected],
          'locked' => tab[:locked]
        }
      end
    end

    def get_radio_signer_tabs(tabs)
      Array(tabs).map do |tab|
        {
          'documentId' => tab[:document_id],
          'groupName' => tab[:group_name],
          'radios' => tab[:radios],
        }
      end
    end

    # TODO (2014-02-03) jonk => document
    def get_event_notification(event_notification)
      return {} unless event_notification
      {
        useSoapInterface:          event_notification[:use_soap_interface] || false,
        includeCertificateWithSoap: event_notification[:include_certificate_with_soap] || false,
        url:                       event_notification[:url],
        loggingEnabled:            event_notification[:logging],
        'envelopeEvents' => Array(event_notification[:envelope_events]).map do |envelope_event|
          {
            includeDocuments:        envelope_event[:include_documents] || false,
            envelopeEventStatusCode: envelope_event[:envelope_event_status_code]
          }
        end,
        'recipientEvents' => Array(event_notification[:recipient_events]).map do |recipient_event|
          {
            includeDocuments:         recipient_event[:include_documents] || false,
            recipientEventStatusCode: recipient_event[:recipient_event_status_code]
          }
        end
      }
    end


    # Internal: takes an array of hashes of signers required to complete a
    # document and allows for setting several options. Not all options are
    # currently dynamic but that's easy to change/add which I (and I'm
    # sure others) will be doing in the future.
    #
    # template           - Includes other optional fields only used when
    #                      being called from a template
    # email              - The signer's email
    # name               - The signer's name
    # embedded           - Tells DocuSign if this is an embedded signer which
    #                      determines whether or not to deliver emails. Also
    #                      lets us authenticate them when they go to do
    #                      embedded signing. Behind the scenes this is setting
    #                      the clientUserId value to the signer's email.
    # email_notification - Send an email or not
    # role_name          - The signer's role, like 'Attorney' or 'Client', etc.
    # template_locked    - Doesn't seem to work/do anything
    # template_required  - Doesn't seem to work/do anything
    # anchor_string      - The string of text to anchor the 'sign here' tab to
    # document_id        - If the doc you want signed isn't the first doc in
    #                      the files options hash
    # page_number        - Page number of the sign here tab
    # x_position         - Distance horizontally from the anchor string for the
    #                      'sign here' tab to appear. Note: doesn't seem to
    #                      currently work.
    # y_position         - Distance vertically from the anchor string for the
    #                      'sign here' tab to appear. Note: doesn't seem to
    #                      currently work.
    # sign_here_tab_text - Instead of 'sign here'. Note: doesn't work
    # tab_label          - TODO: figure out what this is
    def get_signers(signers, options={})
      doc_signers = []

      signers.each_with_index do |signer, index|
        doc_signer = {
          accessCode:                            '',
          addAccessCodeToEmail:                  false,
          customFields:                          signer[:custom_fields],
          idCheckConfigurationName:              signer[:id_check_configuration_name],
          idCheckInformationInput:               nil,
          inheritEmailNotificationConfiguration: false,
          note:                                  signer[:note],
          phoneAuthentication:                   nil,
          recipientAttachment:                   nil,
          requireIdLookup:                       signer[:require_id_lookup],
          requireSignOnPaper:                    signer[:require_sign_on_paper] || false,
          roleName:                              signer[:role_name],
          routingOrder:                          signer[:routing_order] || index + 1,
          socialAuthentications:                 nil
        }

        recipient_id = signer[:recipient_id] || index + 1
        doc_signer[:recipientId] = recipient_id
        doc_signer[:clientUserId] = recipient_id if signer[:embedded_signing]

        if signer[:id_check_information_input]
          doc_signer[:idCheckInformationInput] =
            get_id_check_information_input(signer[:id_check_information_input])
        end

        if signer[:phone_authentication]
          doc_signer[:phoneAuthentication] =
            get_phone_authentication(signer[:phone_authentication])
        end

        if signer[:signing_group_id]
          doc_signer[:signingGroupId] = signer[:signing_group_id]
        else
          doc_signer[:email] = signer[:email]
          doc_signer[:name] = signer[:name]
        end

        if signer[:email_notification]
          doc_signer[:emailNotification] = signer[:email_notification]
        end

        if signer[:embedded]
          doc_signer[:clientUserId] = signer[:client_id] || signer[:email]
        end

        if options[:template] == true
          doc_signer[:templateAccessCodeRequired] = false
          doc_signer[:templateLocked]             = signer[:template_locked].nil? ? true : signer[:template_locked]
          doc_signer[:templateRequired]           = signer[:template_required].nil? ? true : signer[:template_required]
        end

        doc_signer[:autoNavigation]   = false
        doc_signer[:defaultRecipient] = false
        doc_signer[:signatureInfo]    = nil
        doc_signer[:tabs]             = {
          approveTabs:          nil,
          checkboxTabs:         get_tabs(signer[:checkbox_tabs], options, index),
          companyTabs:          nil,
          dateSignedTabs:       get_tabs(signer[:date_signed_tabs], options, index),
          dateTabs:             nil,
          declineTabs:          nil,
          emailTabs:            get_tabs(signer[:email_tabs], options, index),
          envelopeIdTabs:       nil,
          fullNameTabs:         get_tabs(signer[:full_name_tabs], options, index),
          listTabs:             get_tabs(signer[:list_tabs], options, index),
          noteTabs:             nil,
          numberTabs:           get_tabs(signer[:number_tabs], options, index),
          radioGroupTabs:       get_tabs(signer[:radio_group_tabs], options, index),
          initialHereTabs:      get_tabs(signer[:initial_here_tabs], options.merge!(initial_here_tab: true), index),
          signHereTabs:         get_tabs(signer[:sign_here_tabs], options.merge!(sign_here_tab: true), index),
          signerAttachmentTabs: nil,
          ssnTabs:              nil,
          textTabs:             get_tabs(signer[:text_tabs], options, index),
          titleTabs:            get_tabs(signer[:title_tabs], options, index),
          zipTabs:              nil
        }

        # append the fully build string to the array
        doc_signers << doc_signer
      end
      doc_signers
    end


    # Internal: people to be Carbon Copied on the document that is created
    # https://docs.docusign.com/esign/restapi/Envelopes/Envelopes/create/
    #
    # Expecting options to be an array of hashes, with each hash representing a person to carbon copy
    #
    # email         - The email of the recipient to be copied on the document
    # name          - The name of the recipient
    # signer_count  - Used to generate required attributes recipientId and routingOrder which must be unique in the document
    #
    def get_carbon_copies(options, signer_count)
      copies = []
        (options || []).each do |cc|
          signer_count += 1
          raise "Missing required data [:email, :name]" unless (cc[:email] && cc[:name])
          cc.merge!(recipient_id: signer_count, routing_order: signer_count)
          copies << camelize_keys(cc)
        end
      copies
    end

    # Public: Translate ruby oriented keys to camel cased keys recursively through the hash received
    #
    # The method expects symbol parameters in ruby form ":access_code" and translates them to camel cased "accessCode"
    #
    # example [{access_code: '12345', email_notification: {email_body: 'abcdef'}}] -> [{'accessCode': '12345', 'emailNotification': {'emailBody': 'abcdef'}}]
    #
    def camelize_keys(hash)
      new_hash={}
      hash.each do |k,v|
        new_hash[camelize(k.to_s)] = (v.is_a?(Hash) ? camelize_keys(v) : v)
      end
      new_hash
    end

    # Generic implementation to avoid having to pull in Rails dependencies
    #
    def camelize(str)
      str.gsub(/_([a-z])/) { $1.upcase }
    end

    # Internal: takes an array of hashes of certified deliveries
    #
    # email              - The recipient email
    # name               - The recipient name
    # recipient_id       - The recipient's id
    # embedded           - Tells DocuSign if this is an embedded recipient which
    #                      determines whether or not to deliver emails.
    def get_certified_deliveries(certified_deliveries)
      doc_certified_deliveries = []

      certified_deliveries.each do |certified_delivery|
        doc_certified_delivery = {
          email:        certified_delivery[:email],
          name:         certified_delivery[:name],
          recipientId:  certified_delivery[:recipient_id]
        }

        if certified_delivery[:embedded]
          doc_certified_delivery[:clientUserId] = certified_delivery[:client_id] || certified_delivery[:email]
        end

        doc_certified_deliveries << doc_certified_delivery
      end
      doc_certified_deliveries
    end

    # TODO (2014-02-03) jonk => document
    def get_tabs(tabs, options, index)
      tab_array = []

      Array(tabs).map do |tab|
        tab_hash = {}

        if tab[:anchor_string]
          tab_hash[:anchorString]             = tab[:anchor_string]
          tab_hash[:anchorXOffset]            = tab[:anchor_x_offset] || '0'
          tab_hash[:anchorYOffset]            = tab[:anchor_y_offset] || '0'
          tab_hash[:anchorIgnoreIfNotPresent] = tab[:ignore_anchor_if_not_present] || false
          tab_hash[:anchorUnits]              = 'pixels'
        end

        tab_hash[:conditionalParentLabel]   = tab[:conditional_parent_label] if tab.key?(:conditional_parent_label)
        tab_hash[:conditionalParentValue]   = tab[:conditional_parent_value] if tab.key?(:conditional_parent_value)
        tab_hash[:documentId]               = tab[:document_id] || '1'
        tab_hash[:pageNumber]               = tab[:page_number] || '1'
        tab_hash[:recipientId]              = index + 1
        tab_hash[:required]                 = tab[:required] || false

        if options[:template] == true
          tab_hash[:templateLocked]   = tab[:template_locked].nil? ? true : tab[:template_locked]
          tab_hash[:templateRequired] = tab[:template_required].nil? ? true : tab[:template_required]
        end

        if options[:sign_here_tab] == true || options[:initial_here_tab] == true
          tab_hash[:scaleValue] = tab[:scale_value] || 1
        end

        tab_hash[:xPosition]  = tab[:x_position] || '0'
        tab_hash[:yPosition]  = tab[:y_position] || '0'
        tab_hash[:name]       = tab[:name] if tab[:name]
        tab_hash[:optional]   = tab[:optional] || false
        tab_hash[:tabLabel]   = tab[:label] || 'Signature 1'
        tab_hash[:width]      = tab[:width] if tab[:width]
        tab_hash[:height]     = tab[:height] if tab[:height]
        tab_hash[:value]      = tab[:value] if tab[:value]
        tab_hash[:fontSize]   = tab[:font_size] if tab[:font_size]
        tab_hash[:fontColor]  = tab[:font_color] if tab[:font_color]
        tab_hash[:bold]       = tab[:bold] if tab[:bold]
        tab_hash[:italic]     = tab[:italic] if tab[:italic]
        tab_hash[:underline]  = tab[:underline] if tab[:underline]
        tab_hash[:selected]   = tab[:selected] if tab[:selected]

        tab_hash[:locked]     = tab[:locked] || false

        tab_hash[:list_items] = tab[:list_items] if tab[:list_items]

        tab_hash[:groupName] = tab[:group_name] if tab.key?(:group_name)
        tab_hash[:radios] = get_tabs(tab[:radios], options, index) if tab.key?(:radios)

        tab_hash[:validationMessage] = tab[:validation_message] if tab[:validation_message]
        tab_hash[:validationPattern] = tab[:validation_pattern] if tab[:validation_pattern]

        tab_array << tab_hash
      end
      tab_array
    end


    # Internal: sets up the file ios array
    #
    # files - a hash of file params
    #
    # Returns the properly formatted ios used to build the file_params hash
    def create_file_ios(files)
      # UploadIO is from the multipart-post gem's lib/composite_io.rb:57
      # where it has this documentation:
      #
      # ********************************************************************
      # Create an upload IO suitable for including in the params hash of a
      # Net::HTTP::Post::Multipart.
      #
      # Can take two forms. The first accepts a filename and content type, and
      # opens the file for reading (to be closed by finalizer).
      #
      # The second accepts an already-open IO, but also requires a third argument,
      # the filename from which it was opened (particularly useful/recommended if
      # uploading directly from a form in a framework, which often save the file to
      # an arbitrarily named RackMultipart file in /tmp).
      #
      # Usage:
      #
      #     UploadIO.new('file.txt', 'text/plain')
      #     UploadIO.new(file_io, 'text/plain', 'file.txt')
      # ********************************************************************
      #
      # There is also a 4th undocumented argument, opts={}, which allows us
      # to send in not only the Content-Disposition of 'file' as required by
      # DocuSign, but also the documentId parameter which is required as well
      #
      ios = []
      files.each_with_index do |file, index|
        ios << UploadIO.new(
                 file[:io] || file[:path],
                 file[:content_type] || 'application/pdf',
                 file[:name],
                 'Content-Disposition' => "file; documentid=#{index + 1}"
               )
      end
      ios
    end


    # Internal: sets up the file_params for inclusion in a multipart post request
    #
    # ios - An array of UploadIO formatted file objects
    #
    # Returns a hash of files params suitable for inclusion in a multipart
    # post request
    def create_file_params(ios)
      # multi-doc uploading capabilities, each doc needs to be it's own param
      file_params = {}
      ios.each_with_index do |io,index|
        file_params.merge!("file#{index + 1}" => io)
      end
      file_params
    end


    # Internal: takes in an array of hashes of documents and calculates the
    # documentId
    #
    # Returns a hash of documents that are to be uploaded
    def get_documents(ios)
      ios.each_with_index.map do |io, index|
        {
          documentId: "#{index + 1}",
          name: io.original_filename
        }
      end
    end

    # Internal: takes in an array of server template ids and an array of the signers
    # and sets up the composite template
    #
    # Takes an optional array of files, which consist of documents to be used instead of templates
    #
    # Returns an array of server template hashes
    def get_composite_template(server_template_ids, signers, files)
      composite_array = []
      server_template_ids.each_with_index do |template_id, idx|
        server_template_hash = {
            sequence: (idx+1).to_s,
            templateId: template_id,
            templateRoles: get_template_roles(signers),
        }
        templates_hash = {
          serverTemplates: [server_template_hash],
          inlineTemplates: get_inline_signers(signers, (idx+1).to_s)
        }
        if files
          document_hash = {
              documentId: (idx+1).to_s,
              name: "#{files[idx][:name] if files[idx]}"
          }
          templates_hash[:document] = document_hash
        end
        composite_array << templates_hash
      end
      composite_array
    end


    # Internal: takes signer info and the inline template sequence number
    # and sets up the inline template
    #
    # Returns an array of signers
    def get_inline_signers(signers, sequence)
      signers_array = []
      signers.each do |signer|
        signers_hash = {
          email: signer[:email],
          name: signer[:name],
          recipientId: signer[:recipient_id],
          roleName: signer[:role_name],
          clientUserId: signer[:client_id] || signer[:email],
          requireSignOnPaper: signer[:require_sign_on_paper] || false,
          tabs: {
            textTabs:       get_signer_tabs(signer[:text_tabs]),
            radioGroupTabs: get_radio_signer_tabs(signer[:radio_group_tabs]),
            checkboxTabs:   get_signer_tabs(signer[:checkbox_tabs]),
            numberTabs:     get_signer_tabs(signer[:number_tabs]),
            fullNameTabs:   get_signer_tabs(signer[:fullname_tabs]),
            dateTabs:       get_signer_tabs(signer[:date_tabs]),
            signHereTabs:   get_sign_here_tabs(signer[:sign_here_tabs])
          }
        }
        signers_array << signers_hash
      end
      template_hash = {sequence: sequence, recipients: { signers: signers_array }}
      [template_hash]
    end


    # Internal sets up the Net::HTTP request
    #
    # uri         - The fully qualified final URI
    # post_body   - The custom post body including the signers, etc
    # file_params - Formatted hash of ios to merge into the post body
    # headers     - Allows for passing in custom headers
    #
    # Returns a request object suitable for embedding in a request
    def initialize_net_http_multipart_post_request(uri, post_body, file_params, headers)
      # Net::HTTP::Post::Multipart is from the multipart-post gem's lib/multipartable.rb
      #
      # path       - The fully qualified URI for the request
      # params     - A hash of params (including files for uploading and a
      #              customized request body)
      # headers={} - The fully merged, final request headers
      # boundary   - Optional: you can give the request a custom boundary
      #

      headers = headers.dup.merge(parts: {post_body: {'Content-Type' => 'application/json'}})

      request = Net::HTTP::Post::Multipart.new(
        uri.request_uri,
        { post_body: post_body }.merge(file_params),
        headers
      )

      # DocuSign requires that we embed the document data in the body of the
      # JSON request directly so we need to call '.read' on the multipart-post
      # provided body_stream in order to serialize all the files into a
      # compatible JSON string.
      request.body = request.body_stream.read
      request
    end


    # Public: creates an envelope from a document directly without a template
    #
    # file_io       - Optional: an opened file stream of data (if you don't
    #                 want to save the file to the file system as an incremental
    #                 step)
    # file_path     - Required if you don't provide a file_io stream, this is
    #                 the local path of the file you wish to upload. Absolute
    #                 paths recommended.
    # file_name     - The name you want to give to the file you are uploading
    # content_type  - (for the request body) application/json is what DocuSign
    #                 is expecting
    # email[subject] - (Optional) short subject line for the email
    # email[body]    - (Optional) custom text that will be injected into the
    #                 DocuSign generated email
    # email_settings[bcc_emails] - (Optional) array of emails to BCC.
    # email_settings[reply_to_email] - (Optional) override the default reply to email for the account.
    # email_settings[reply_to_name] - (Optional) override the default reply to name for the account.
    # signers       - A hash of users who should receive the document and need
    #                 to sign it. More info about the options available for
    #                 this method are documented above it's method definition.
    # carbon_copies - An array of hashes that includes users names and email who
    #                 should receive a copy of the document once it is complete.
    # status        - Options include: 'sent', 'created', 'voided' and determine
    #                 if the envelope is sent out immediately or stored for
    #                 sending at a later time
    # customFields  - (Optional) A hash of listCustomFields and textCustomFields.
    #                 Each contains an array of corresponding customField hashes.
    #                 For details, please see: http://bit.ly/1FnmRJx
    # headers       - Allows a client to pass in some headers
    # wet_sign      - (Optional) If true, the signer is allowed to print the
    #                 document and sign it on paper. False if not defined.
    #
    # Returns a JSON parsed response object containing:
    #   envelopeId     - The envelope's ID
    #   status         - Sent, created, or voided
    #   statusDateTime - The date/time the envelope was created
    #   uri            - The relative envelope uri
    def create_envelope_from_document(options={})
      ios = create_file_ios(options[:files])
      file_params = create_file_params(ios)
      recipients = if options[:certified_deliveries].nil? || options[:certified_deliveries].empty?
                     { signers: get_signers(options[:signers]) }
                   else
                     { certifiedDeliveries: get_signers(options[:certified_deliveries]) }
                   end


      post_hash = {
        emailBlurb:   "#{options[:email][:body] if options[:email]}",
        emailSubject: "#{options[:email][:subject] if options[:email]}",
        emailSettings: get_email_settings(options[:email_settings]),
        documents: get_documents(ios),
        recipients: {
          signers: get_signers(options[:signers]),
          carbonCopies: get_carbon_copies(options[:carbon_copies],options[:signers].size)
        },
        eventNotification: get_event_notification(options[:event_notification]),
        status: "#{options[:status]}",
        customFields: options[:custom_fields]
      }
      post_hash[:enableWetSign] = options[:wet_sign] if options.has_key? :wet_sign
      post_body = post_hash.to_json

      uri = build_uri("/accounts/#{acct_id}/envelopes")

      http = initialize_net_http_ssl(uri)

      request = initialize_net_http_multipart_post_request(
                  uri, post_body, file_params, headers(options[:headers])
                )

      response = http.request(request)
      generate_log(request, response, uri)
      JSON.parse(response.body)
    end

    # Public: allows a template to be dynamically created with several options.
    #
    # files         - An array of hashes of file parameters which will be used
    #                 to create actual files suitable for upload in a multipart
    #                 request.
    #
    #                 Options: io, path, name. The io is optional and would
    #                 require creating a file_io object to embed as the first
    #                 argument of any given file hash. See the create_file_ios
    #                 method definition above for more details.
    #
    # email/body    - (Optional) sets the text in the email. Note: the envelope
    #                 seems to override this, not sure why it needs to be
    #                 configured here as well. I usually leave it blank.
    # email/subject - (Optional) sets the text in the email. Note: the envelope
    #                 seems to override this, not sure why it needs to be
    #                 configured here as well. I usually leave it blank.
    # signers       - An array of hashes of signers. See the
    #                 get_signers method definition for options.
    # description   - The template description
    # name          - The template name
    # headers       - Optional hash of headers to merge into the existing
    #                 required headers for a multipart request.
    #
    # Returns a JSON parsed response body containing the template's:
    #   name - Name given above
    #   templateId - The auto-generated ID provided by DocuSign
    #   Uri - the URI where the template is located on the DocuSign servers
    def create_template(options={})
      ios = create_file_ios(options[:files])
      file_params = create_file_params(ios)

      post_body = {
        emailBlurb: "#{options[:email][:body] if options[:email]}",
        emailSubject: "#{options[:email][:subject] if options[:email]}",
        documents: get_documents(ios),
        recipients: {
          signers: get_signers(options[:signers], template: true)
        },
        envelopeTemplateDefinition: {
          description: options[:description],
          name: options[:name],
          pageCount: 1,
          password: '',
          shared: false
        }
      }.to_json

      uri = build_uri("/accounts/#{acct_id}/templates")
      http = initialize_net_http_ssl(uri)

      request = initialize_net_http_multipart_post_request(
                  uri, post_body, file_params, headers(options[:headers])
                )

      response = http.request(request)
      generate_log(request, response, uri)
      JSON.parse(response.body)
    end


    # TODO (2014-02-03) jonk => document
    def get_template(template_id, options = {})
      content_type = { 'Content-Type' => 'application/json' }
      content_type.merge(options[:headers]) if options[:headers]

      uri = build_uri("/accounts/#{acct_id}/templates/#{template_id}")

      http = initialize_net_http_ssl(uri)
      request = Net::HTTP::Get.new(uri.request_uri, headers(content_type))
      response = http.request(request)
      generate_log(request, response, uri)
      JSON.parse(response.body)
    end


    # Public: create an envelope for delivery from a template
    #
    # headers        - Optional hash of headers to merge into the existing
    #                  required headers for a POST request.
    # status         - Options include: 'sent', 'created', 'voided' and
    #                  determine if the envelope is sent out immediately or
    #                  stored for sending at a later time
    # email/body     - Sets the text in the email body
    # email/subject  - Sets the text in the email subject line
    # template_id    - The id of the template upon which we want to base this
    #                  envelope
    # template_roles - See the get_template_roles method definition for a list
    #                  of options to pass. Note: for consistency sake we call
    #                  this 'signers' and not 'templateRoles' when we build up
    #                  the request in client code.
    # headers        - Optional hash of headers to merge into the existing
    #                  required headers for a multipart request.
    #
    # Returns a JSON parsed response body containing the envelope's:
    #   name - Name given above
    #   templateId - The auto-generated ID provided by DocuSign
    #   Uri - the URI where the template is located on the DocuSign servers
    def create_envelope_from_template(options={})
      content_type = { 'Content-Type' => 'application/json' }
      content_type.merge(options[:headers]) if options[:headers]

      post_body = {
        status:             options[:status],
        emailBlurb:         options[:email][:body],
        emailSubject:       options[:email][:subject],
        templateId:         options[:template_id],
        enableWetSign:      options[:wet_sign],
        brandId:            options[:brand_id],
        eventNotification:  get_event_notification(options[:event_notification]),
        templateRoles:      get_template_roles(options[:signers]),
        customFields:       options[:custom_fields],
        allowReassign:      options[:allow_reassign]
      }.to_json

      uri = build_uri("/accounts/#{acct_id}/envelopes")

      http = initialize_net_http_ssl(uri)

      request = Net::HTTP::Post.new(uri.request_uri, headers(content_type))
      request.body = post_body

      response = http.request(request)
      generate_log(request, response, uri)
      JSON.parse(response.body)
    end


    # Public: create an envelope for delivery from a composite template
    #
    # headers               - Optional hash of headers to merge into the existing
    #                         required headers for a POST request.
    # status                - Options include: 'sent', or 'created' and
    #                         determine if the envelope is sent out immediately or
    #                         stored for sending at a later time
    # email/body            - Sets the text in the email body
    # email/subject         - Sets the text in the email subject line
    # files                 - Sets documents to be used instead of inline or server templates
    # signers               - See get_template_roles/get_inline_signers for a list
    #                         of options to pass.
    # headers               - Optional hash of headers to merge into the existing
    #                         required headers for a multipart request.
    # server_template_ids   - Array of ids for templates uploaded to DocuSign. Templates
    #                         will be added in the order they appear in the array.
    #
    # Returns a JSON parsed response body containing the envelope's:
    #   envelopeId - autogenerated ID provided by Docusign
    #   uri - the URI where the template is located on the DocuSign servers
    #   statusDateTime - The date/time the envelope was created
    #   status         - Sent, created, or voided
    def create_envelope_from_composite_template(options={})
      file_params = {}

      if options[:files]
        ios = create_file_ios(options[:files])
        file_params = create_file_params(ios)
      end

      post_hash = {
        emailBlurb:        "#{options[:email][:body] if options[:email]}",
        emailSubject:      "#{options[:email][:subject] if options[:email]}",
        status:             options[:status],
        brandId:            options[:brand_id],
        eventNotification:  get_event_notification(options[:event_notification]),
        allowReassign:      options[:allow_reassign],
        compositeTemplates: get_composite_template(options[:server_template_ids], options[:signers], options[:files])
      }

      post_body = post_hash.to_json

      uri = build_uri("/accounts/#{acct_id}/envelopes")

      http = initialize_net_http_ssl(uri)

      request = initialize_net_http_multipart_post_request(
                  uri, post_body, file_params, headers(options[:headers])
                )

      response = http.request(request)
      generate_log(request, response, uri)
      JSON.parse(response.body)
    end

    # Public fetches custom fields for a document
    #
    # options[:envelope_id]           - ID of the envelope which you want to send
    # options[:document_id]           - ID of the envelope which you want to send
    #
    # Returns the custom fields Hash.
    def get_document_tabs(options)
      content_type = { 'Content-Type' => 'application/json' }
      uri = build_uri("/accounts/#{acct_id}/envelopes/#{options[:envelope_id]}/documents/#{options[:document_id]}/tabs")

      http = initialize_net_http_ssl(uri)
      request = Net::HTTP::Get.new(uri.request_uri, headers(content_type))
      response = http.request(request)
      generate_log(request, response, uri)
      JSON.parse(response.body)
    end

    # Public marks an envelope as sent
    #
    # envelope_id           - ID of the envelope which you want to send
    #
    # Returns the response (success or failure).
    def send_envelope(envelope_id)
      content_type = { 'Content-Type' => 'application/json' }

      post_body = {
        status: 'sent'
      }.to_json

      uri = build_uri("/accounts/#{acct_id}/envelopes/#{envelope_id}")

      http = initialize_net_http_ssl(uri)
      request = Net::HTTP::Put.new(uri.request_uri, headers(content_type))
      request.body = post_body
      response = http.request(request)

      JSON.parse(response.body)
    end


    # Public returns the names specified for a given email address (existing docusign user)
    #
    # email       - the email of the recipient
    # headers     - optional hash of headers to merge into the existing
    #               required headers for a multipart request.
    #
    # Returns the list of names
    def get_recipient_names(options={})
      content_type = { 'Content-Type' => 'application/json' }
      content_type.merge(options[:headers]) if options[:headers]

      uri = build_uri("/accounts/#{acct_id}/recipient_names?email=#{options[:email]}")

      http = initialize_net_http_ssl(uri)

      request = Net::HTTP::Post.new(uri.request_uri, headers(content_type))

      response = http.request(request)
      generate_log(request, response, uri)
      JSON.parse(response.body)
    end

    # Public adds the certified delivery recipients (Need to View) for a given envelope
    #
    # envelope_id           - ID of the envelope for which you want to retrieve the
    #                         signer info
    # headers               - optional hash of headers to merge into the existing
    #                         required headers for a multipart request.
    # certified_deliveries  - A required hash of all the certified delivery recipients
    #                         that need to be added to the envelope
    #
    # # The response returns the success or failure of each recipient being added
    # to the envelope and the envelope ID
    def add_envelope_certified_deliveries(options={})
      content_type = { 'Content-Type' => 'application/json' }
      content_type.merge(options[:headers]) if options[:headers]

      post_body = {
        certifiedDeliveries: get_certified_deliveries(options[:certified_deliveries]),
      }.to_json

      uri = build_uri("/accounts/#{acct_id}/envelopes/#{options[:envelope_id]}/recipients")

      http = initialize_net_http_ssl(uri)

      request = Net::HTTP::Post.new(uri.request_uri, headers(content_type))
      request.body = post_body

      response = http.request(request)
      generate(request, response, uri)
      JSON.parse(response.body)
    end

    # Public returns the URL for embedded signing
    #
    # envelope_id - the ID of the envelope you wish to use for embedded signing
    # name        - the name of the signer
    # email       - the email of the recipient
    # return_url  - the URL you want the user to be directed to after he or she
    #               completes the document signing
    # headers     - optional hash of headers to merge into the existing
    #               required headers for a multipart request.
    #
    # Returns the URL string for embedded signing (can be put in an iFrame)
    def get_recipient_view(options={})
      content_type = { 'Content-Type' => 'application/json' }
      content_type.merge(options[:headers]) if options[:headers]

      post_body = {
        authenticationMethod: 'email',
        clientUserId:         options[:client_id] || options[:email],
        email:                options[:email],
        returnUrl:            options[:return_url],
        userName:             options[:name]
      }.to_json

      uri = build_uri("/accounts/#{acct_id}/envelopes/#{options[:envelope_id]}/views/recipient")

      http = initialize_net_http_ssl(uri)

      request = Net::HTTP::Post.new(uri.request_uri, headers(content_type))
      request.body = post_body

      response = http.request(request)
      generate_log(request, response, uri)
      JSON.parse(response.body)
    end

    # Public returns the URL for embedded sending
    #
    # envelope_id - the ID of the envelope you wish to use
    # return_url  - the URL you want the user to be directed to after he or she
    #               closes the view
    # headers     - optional hash of headers to merge into the existing
    #               required headers for a multipart request.
    #
    # Returns the URL string for embedded sending
    def get_sender_view(options = {})
      content_type = { 'Content-Type' => 'application/json' }
      content_type.merge(options[:headers]) if options[:headers]

      uri = build_uri("/accounts/#{acct_id}/envelopes/#{options[:envelope_id]}/views/sender")

      http = initialize_net_http_ssl(uri)

      request = Net::HTTP::Post.new(uri.request_uri, headers(content_type))
      request.body = { returnUrl: options[:return_url] }.to_json

      response = http.request(request)
      generate_log(request, response, uri)
      JSON.parse(response.body)
    end

    # Public returns the URL for embedded console
    #
    # envelope_id - the ID of the envelope you wish to use for embedded signing
    # headers     - optional hash of headers to merge into the existing
    #               required headers for a multipart request.
    #
    # Returns the URL string for embedded console (can be put in an iFrame)
    def get_console_view(options={})
      content_type = { 'Content-Type' => 'application/json' }
      content_type.merge(options[:headers]) if options[:headers]

      post_body = {
        envelopeId: options[:envelope_id]
      }.to_json

      uri = build_uri("/accounts/#{acct_id}/views/console")

      http = initialize_net_http_ssl(uri)

      request = Net::HTTP::Post.new(uri.request_uri, headers(content_type))
      request.body = post_body

      response = http.request(request)
      generate_log(request, response, uri)
      parsed_response = JSON.parse(response.body)
      parsed_response['url']
    end


    # Public returns the envelope recipients for a given envelope
    #
    # include_tabs - boolean, determines if the tabs for each signer will be
    #                returned in the response, defaults to false.
    # envelope_id  - ID of the envelope for which you want to retrieve the
    #                signer info
    # headers      - optional hash of headers to merge into the existing
    #                required headers for a multipart request.
    #
    # Returns a hash of detailed info about the envelope including the signer
    # hash and status of each signer
    def get_envelope_recipients(options={})
      content_type = { 'Content-Type' => 'application/json' }
      content_type.merge(options[:headers]) if options[:headers]

      include_tabs = options[:include_tabs] || false
      include_extended = options[:include_extended] || false
      uri = build_uri("/accounts/#{acct_id}/envelopes/#{options[:envelope_id]}/recipients?include_tabs=#{include_tabs}&include_extended=#{include_extended}")

      http = initialize_net_http_ssl(uri)
      request = Net::HTTP::Get.new(uri.request_uri, headers(content_type))
      response = http.request(request)
      generate_log(request, response, uri)
      JSON.parse(response.body)
    end


    # Public retrieves the envelope status
    #
    # envelope_id      - ID of the envelope from which the doc will be retrieved
    def get_envelope_status(options={})
      content_type = { 'Content-Type' => 'application/json' }
      content_type.merge(options[:headers]) if options[:headers]

      uri = build_uri("/accounts/#{acct_id}/envelopes/#{options[:envelope_id]}")

      http = initialize_net_http_ssl(uri)
      request = Net::HTTP::Get.new(uri.request_uri, headers(content_type))
      response = http.request(request)
      generate_log(request, response, uri)
      JSON.parse(response.body)
    end


    # Public retrieves the statuses of envelopes matching the given query
    #
    # from_date      - Docusign formatted Date/DateTime. Only return items after this date.
    #
    # to_date        - Docusign formatted Date/DateTime. Only return items up to this date.
    #                  Defaults to the time of the call.
    #
    # from_to_status - The status of the envelope checked for in the from_date - to_date period.
    #                  Defaults to 'changed'
    #
    # envelope_ids   - Comma joined list of envelope_ids which you want to query.
    #
    # status         - The current status of the envelope. Defaults to any status.
    #
    # Returns an array of hashes containing envelope statuses, ids, and similar information.
    def get_envelope_statuses(options={})
      content_type = { 'Content-Type' => 'application/json' }
      content_type.merge(options[:headers]) if options[:headers]

      query_params = options.slice(:from_date, :to_date, :from_to_status, :envelope_ids, :status)
      # Note that Hash#to_query is an ActiveSupport monkeypatch
      uri = build_uri("/accounts/#{acct_id}/envelopes?#{query_params.to_query}")

      http     = initialize_net_http_ssl(uri)
      request  = Net::HTTP::Get.new(uri.request_uri, headers(content_type))
      response = http.request(request)
      generate_log(request, response, uri)
      JSON.parse(response.body)
    end

    # Public retrieves a png of a page of a document in an envelope
    #
    # envelope_id      - ID of the envelope from which the doc will be retrieved
    # document_id      - ID of the document to retrieve
    # page_number      - page number to retrieve
    #
    # Returns the png as a bytestream
    def get_page_image(options={})
      envelope_id = options[:envelope_id]
      document_id = options[:document_id]
      page_number = options[:page_number]

      uri = build_uri("/accounts/#{acct_id}/envelopes/#{envelope_id}/documents/#{document_id}/pages/#{page_number}/page_image")

      http     = initialize_net_http_ssl(uri)
      request  = Net::HTTP::Get.new(uri.request_uri, headers)
      response = http.request(request)
      generate_log(request, response, uri)
      response.body
    end

    # Public retrieves the attached file from a given envelope
    #
    # envelope_id      - ID of the envelope from which the doc will be retrieved
    # document_id      - ID of the document to retrieve
    # local_save_path  - Local absolute path to save the doc to including the
    #                    filename itself
    # headers          - Optional hash of headers to merge into the existing
    #                    required headers for a multipart request.
    #
    # Example
    #
    #   client.get_document_from_envelope(
    #     envelope_id: @envelope_response['envelopeId'],
    #     document_id: 1,
    #     local_save_path: 'docusign_docs/file_name.pdf',
    #     return_stream: true/false # will return the bytestream instead of saving doc to file system.
    #   )
    #
    # Returns the PDF document as a byte stream.
    def get_document_from_envelope(options={})
      content_type = { 'Content-Type' => 'application/json' }
      content_type.merge(options[:headers]) if options[:headers]

      uri = build_uri("/accounts/#{acct_id}/envelopes/#{options[:envelope_id]}/documents/#{options[:document_id]}")

      http = initialize_net_http_ssl(uri)
      request = Net::HTTP::Get.new(uri.request_uri, headers(content_type))
      response = http.request(request)
      generate_log(request, response, uri)
      return response.body if options[:return_stream]

      split_path = options[:local_save_path].split('/')
      split_path.pop #removes the document name and extension from the array
      path = split_path.join("/") #rejoins the array to form path to the folder that will contain the file

      FileUtils.mkdir_p(path)
      File.open(options[:local_save_path], 'wb') do |output|
        output << response.body
      end
    end


    # Public retrieves the document infos from a given envelope
    #
    # envelope_id - ID of the envelope from which document infos are to be retrieved
    #
    # Returns a hash containing the envelopeId and the envelopeDocuments array
    def get_documents_from_envelope(options={})
      content_type = { 'Content-Type' => 'application/json' }
      content_type.merge(options[:headers]) if options[:headers]

      uri = build_uri("/accounts/#{acct_id}/envelopes/#{options[:envelope_id]}/documents")

      http     = initialize_net_http_ssl(uri)
      request  = Net::HTTP::Get.new(uri.request_uri, headers(content_type))
      response = http.request(request)
      generate_log(request, response, uri)
      JSON.parse(response.body)
    end


    # Public retrieves a PDF containing the combined content of all
    # documents and the certificate for the given envelope.
    #
    # envelope_id      - ID of the envelope from which the doc will be retrieved
    # local_save_path  - Local absolute path to save the doc to including the
    #                    filename itself
    # headers          - Optional hash of headers to merge into the existing
    #                    required headers for a multipart request.
    # params           - Optional params; for example, certificate: true
    #
    # Example
    #
    #   client.get_combined_document_from_envelope(
    #     envelope_id: @envelope_response['envelopeId'],
    #     local_save_path: 'docusign_docs/file_name.pdf',
    #     return_stream: true/false # will return the bytestream instead of saving doc to file system.
    #   )
    #
    # Returns the PDF document as a byte stream.
    def get_combined_document_from_envelope(options={})
      content_type = { 'Content-Type' => 'application/json' }
      content_type.merge(options[:headers]) if options[:headers]

      uri = build_uri("/accounts/#{acct_id}/envelopes/#{options[:envelope_id]}/documents/combined")
      uri.query = URI.encode_www_form(options[:params]) if options[:params]

      http = initialize_net_http_ssl(uri)
      request = Net::HTTP::Get.new(uri.request_uri, headers(content_type))
      response = http.request(request)
      generate_log(request, response, uri)
      return response.body if options[:return_stream]

      split_path = options[:local_save_path].split('/')
      split_path.pop #removes the document name and extension from the array
      path = split_path.join("/") #rejoins the array to form path to the folder that will contain the file

      FileUtils.mkdir_p(path)
      File.open(options[:local_save_path], 'wb') do |output|
        output << response.body
      end
    end


    # Public moves the specified envelopes to the given folder
    #
    # envelope_ids     - IDs of the envelopes to be moved
    # folder_id        - ID of the folder to move the envelopes to
    # headers          - Optional hash of headers to merge into the existing
    #                    required headers for a multipart request.
    #
    # Example
    #
    #   client.move_envelope_to_folder(
    #     envelope_ids: ["xxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxx"]
    #     folder_id: "xxxxx-2222xxxxx",
    #   )
    #
    # Returns the response.
    def move_envelope_to_folder(options = {})
      content_type = { 'Content-Type' => 'application/json' }
      content_type.merge(options[:headers]) if options[:headers]

      post_body = {
        envelopeIds: options[:envelope_ids]
      }.to_json

      uri = build_uri("/accounts/#{acct_id}/folders/#{options[:folder_id]}")

      http = initialize_net_http_ssl(uri)
      request = Net::HTTP::Put.new(uri.request_uri, headers(content_type))
      request.body = post_body
      response = http.request(request)
      generate_log(request, response, uri)
      response
    end


    # Public returns a hash of audit events for a given envelope
    #
    # envelope_id       - ID of the envelope to get audit events from
    #
    #
    # Example
    # client.get_envelope_audit_events(
    #   envelope_id: "xxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxx"
    # )
    # Returns a hash of the events that have happened to the envelope.
    def get_envelope_audit_events(options = {})
      content_type = { 'Content-Type' => 'application/json' }
      content_type.merge(options[:headers]) if options[:headers]

      uri = build_uri("/accounts/#{acct_id}/envelopes/#{options[:envelope_id]}/audit_events")

      http = initialize_net_http_ssl(uri)
      request = Net::HTTP::Get.new(uri.request_uri, headers(content_type))
      response = http.request(request)
      generate_log(request, response, uri)
      JSON.parse(response.body)
    end

    # Public retrieves folder information. Helpful to use before client.search_folder_for_envelopes
    def get_folder_list(options={})
      content_type = { 'Content-Type' => 'application/json' }
      content_type.merge(options[:headers]) if options[:headers]

      uri = build_uri("/accounts/#{@acct_id}/folders/")

      http = initialize_net_http_ssl(uri)
      request = Net::HTTP::Get.new(uri.request_uri, headers(content_type))
      response = http.request(request)
      generate_log(request, response, uri)
      JSON.parse(response.body)
    end

    # Public retrieves the envelope(s) from a specific folder based on search params.
    #
    # Option Query Terms(none are required):
    # query_params:
    #   start_position: Integer The position of the folder items to return. This is used for repeated calls, when the number of envelopes returned is too much for one return (calls return 100 envelopes at a time). The default value is 0.
    #   from_date:      date/Time Only return items on or after this date. If no value is provided, the default search is the previous 30 days.
    #   to_date:        date/Time Only return items up to this date. If no value is provided, the default search is to the current date.
    #   search_text:    String   The search text used to search the items of the envelope. The search looks at recipient names and emails, envelope custom fields, sender name, and subject.
    #   status:         Status  The current status of the envelope. If no value is provided, the default search is all/any status.
    #   owner_name:     username  The name of the folder owner.
    #   owner_email:    email The email of the folder owner.
    #
    # Example
    #
    #   client.search_folder_for_envelopes(
    #     folder_id: xxxxx-2222xxxxx,
    #     query_params: {
    #       search_text: "John Appleseed",
    #       from_date: '7-1-2011+11:00:00+AM',
    #       to_date: '7-1-2011+11:00:00+AM',
    #       status: "completed"
    #     }
    #   )
    #
    def search_folder_for_envelopes(options={})
      content_type = { 'Content-Type' => 'application/json' }
      content_type.merge(options[:headers]) if options[:headers]

      q ||= []
      options[:query_params].each do |key, val|
        q << "#{key}=#{val}"
      end

      uri = build_uri("/accounts/#{@acct_id}/folders/#{options[:folder_id]}/?#{q.join('&')}")

      http = initialize_net_http_ssl(uri)
      request = Net::HTTP::Get.new(uri.request_uri, headers(content_type))
      response = http.request(request)
      generate_log(request, response, uri)
      JSON.parse(response.body)
    end


    # TODO (2014-02-03) jonk => document
    def create_account(options)
      content_type = { 'Content-Type' => 'application/json' }
      content_type.merge(options[:headers]) if options[:headers]

      uri = build_uri('/accounts')

      post_body = convert_hash_keys(options).to_json

      http = initialize_net_http_ssl(uri)
      request = Net::HTTP::Post.new(uri.request_uri, headers(content_type))
      request.body = post_body
      response = http.request(request)
      generate_log(request, response, uri)
      JSON.parse(response.body)
    end


    # TODO (2014-02-03) jonk => document
    def convert_hash_keys(value)
      case value
      when Array
        value.map { |v| convert_hash_keys(v) }
      when Hash
        Hash[value.map { |k, v| [k.to_s.camelize(:lower), convert_hash_keys(v)] }]
      else
        value
      end
    end


    # TODO (2014-02-03) jonk => document
    def delete_account(account_id, options = {})
      content_type = { 'Content-Type' => 'application/json' }
      content_type.merge(options[:headers]) if options[:headers]

      uri = build_uri("/accounts/#{account_id}")

      http = initialize_net_http_ssl(uri)
      request = Net::HTTP::Delete.new(uri.request_uri, headers(content_type))
      response = http.request(request)
      generate_log(request, response, uri)
      json = response.body
      json = '{}' if json.nil? || json == ''
      JSON.parse(json)
    end


    # Public: Retrieves a list of available templates
    #
    # params:   Can contain a folder
    #
    # Example
    #
    #    client.get_templates()
    #
    # or
    #
    #    client.get_templates(params: {folder: "somefolder"})
    #
    # Returns a list of the available templates.
    def get_templates(options={})
      uri = build_uri("/accounts/#{acct_id}/templates")
      uri.query = URI.encode_www_form(options[:params]) if options[:params]

      http = initialize_net_http_ssl(uri)
      request = Net::HTTP::Get.new(uri.request_uri, headers({ 'Content-Type' => 'application/json' }))
      response = http.request(request)
      generate_log(request, response, uri)
      JSON.parse(response.body)
    end


    # Public: Retrieves a list of templates used in an envelope
    #
    # Returns templateId, name and uri for each template found.
    #
    # envelope_id - DS id of envelope with templates.
    def get_templates_in_envelope(envelope_id)
      uri = build_uri("/accounts/#{acct_id}/envelopes/#{envelope_id}/templates")

      http = initialize_net_http_ssl(uri)
      request = Net::HTTP::Get.new(uri.request_uri, headers({ 'Content-Type' => 'application/json' }))
      response = http.request(request)
      generate_log(request, response, uri)
      JSON.parse(response.body)
    end


    # Grabs envelope data.
    # Equivalent to the following call in the API explorer:
    # Get Envelopev2/accounts/:accountId/envelopes/:envelopeId
    #
    # envelope_id- DS id of envelope to be retrieved.
    def get_envelope(envelope_id)
      content_type = { 'Content-Type' => 'application/json' }
      uri = build_uri("/accounts/#{acct_id}/envelopes/#{envelope_id}")

      http = initialize_net_http_ssl(uri)
      request = Net::HTTP::Get.new(uri.request_uri, headers(content_type))
      response = http.request(request)
      generate_log(request, response, uri)
      JSON.parse(response.body)
    end


    # Public deletes a recipient for a given envelope
    #
    # envelope_id  - ID of the envelope for which you want to retrieve the
    #                signer info
    # recipient_id - ID of the recipient to delete
    #
    # Returns a hash of recipients with an error code for any recipients that
    # were not successfully deleted.
    def delete_envelope_recipient(options={})
      content_type = {'Content-Type' => 'application/json'}
      content_type.merge(options[:headers]) if options[:headers]

      uri = build_uri("/accounts/#{@acct_id}/envelopes/#{options[:envelope_id]}/recipients")
      post_body = "{
        \"signers\" : [{\"recipientId\" : \"#{options[:recipient_id]}\"}]
       }"

      http = initialize_net_http_ssl(uri)
      request = Net::HTTP::Delete.new(uri.request_uri, headers(content_type))
      request.body = post_body

      response = http.request(request)
      generate_log(request, response, uri)
      JSON.parse(response.body)
    end


    # Public voids an in-process envelope
    #
    # envelope_id      - ID of the envelope to be voided
    # voided_reason    - Optional reason for the envelope being voided
    #
    # Returns the response (success or failure).
    def void_envelope(options = {})
      content_type = { 'Content-Type' => 'application/json' }
      content_type.merge(options[:headers]) if options[:headers]

      post_body = {
          "status" =>"voided",
          "voidedReason" => options[:voided_reason] || "No reason provided."
      }.to_json

      uri = build_uri("/accounts/#{acct_id}/envelopes/#{options[:envelope_id]}")

      http = initialize_net_http_ssl(uri)
      request = Net::HTTP::Put.new(uri.request_uri, headers(content_type))
      request.body = post_body
      response = http.request(request)
      generate_log(request, response, uri)
      response
    end

    # Public deletes a document for a given envelope
    # See https://docs.docusign.com/esign/restapi/Envelopes/EnvelopeDocuments/delete/
    #
    # envelope_id  - ID of the envelope from which the doc will be retrieved
    # document_id - ID of the document to delete
    #
    # Returns the success or failure of each document being added to the envelope and
    # the envelope ID. Failed operations on array elements will add the "errorDetails"
    # structure containing an error code and message. If "errorDetails" is null, then
    # the operation was successful for that item.
    def delete_envelope_document(options={})
      content_type = {'Content-Type' => 'application/json'}
      content_type.merge(options[:headers]) if options[:headers]

      uri = build_uri("/accounts/#{@acct_id}/envelopes/#{options[:envelope_id]}/documents")
      post_body = {
        documents: [
          { documentId: options[:document_id] }
        ]
      }.to_json

      http = initialize_net_http_ssl(uri)
      request = Net::HTTP::Delete.new(uri.request_uri, headers(content_type))
      request.body = post_body

      response = http.request(request)
      generate_log(request, response, uri)
      JSON.parse(response.body)
    end

    # Public adds a document to a given envelope
    # See https://docs.docusign.com/esign/restapi/Envelopes/EnvelopeDocuments/update/
    #
    # envelope_id  - ID of the envelope from which the doc will be added
    # document_id - ID of the document to add
    # file_path - Local or remote path to file
    # content_type - optional content type for file.  Defaults to application/pdf.
    # file_name - optional name for file.  Defaults to basename of file_path.
    # file_extension - optional extension for file.  Defaults to extname of file_name.
    # file_io       - Optional: an opened I/O stream of data (if you don't
    #                 want to read from a file)
    #
    # The response only returns a success or failure.
    def add_envelope_document(options={})
      options[:content_type] ||= 'application/pdf'
      options[:file_name] ||= File.basename(options[:file_path])
      options[:file_extension] ||= File.extname(options[:file_name])[1..-1]

      headers = {
        'Content-Type' => options[:content_type],
        'Content-Disposition' => "file; filename=\"#{options[:file_name]}\"; documentid=#{options[:document_id]}; fileExtension=\"#{options[:file_extension]}\""
      }

      uri = build_uri("/accounts/#{@acct_id}/envelopes/#{options[:envelope_id]}/documents/#{options[:document_id]}")
      post_body = if options[:file_io].present?
        options[:file_io].read
      else
        open(options[:file_path]).read
      end

      http = initialize_net_http_ssl(uri)
      request = Net::HTTP::Put.new(uri.request_uri, headers(headers))
      request.body = post_body
      response = http.request(request)
      generate_log(request, response, uri)
      response
    end

    # Public adds signers to a given envelope
    # Seehttps://docs.docusign.com/esign/restapi/Envelopes/EnvelopeRecipients/update/
    #
    # envelope_id - ID of the envelope to which the recipient will be added
    # signers - Array of hashes
    #           See https://docs.docusign.com/esign/restapi/Envelopes/EnvelopeRecipients/update/#definitions
    #
    # TODO: This could be made more general as an add_envelope_recipient method
    # to handle recipient types other than Signer
    # See: https://docs.docusign.com/esign/restapi/Envelopes/EnvelopeRecipients/update/#examples
    def add_envelope_signers(options = {})
      content_type = { "Content-Type" => "application/json" }
      content_type.merge(options[:headers]) if options[:headers]

      uri = build_uri("/accounts/#{@acct_id}/envelopes/#{options[:envelope_id]}/recipients")
      post_body = { signers: options[:signers] }.to_json

      http = initialize_net_http_ssl(uri)
      request = Net::HTTP::Put.new(uri.request_uri, headers(content_type))
      request.body = post_body

      response = http.request(request)
      generate_log(request, response, uri)
      JSON.parse(response.body)
    end

    # Public adds recipient tabs to a given envelope
    # See https://docs.docusign.com/esign/restapi/Envelopes/EnvelopeRecipients/update/
    #
    # envelope_id  - ID of the envelope from which the doc will be added
    # recipient - ID of the recipient to add tabs to
    # tabs - hash of tab (see example below)
    # {
    #   signHereTabs: [
    #     {
    #       anchorString: '/s1/',
    #       anchorXOffset: '5',
    #       anchorYOffset: '8',
    #       anchorIgnoreIfNotPresent: 'true',
    #       documentId: '1',
    #       pageNumber: '1',
    #       recipientId: '1'
    #     }
    #   ],
    #   initialHereTabs: [
    #     {
    #       anchorString: '/i1/',
    #       anchorXOffset: '5',
    #       anchorYOffset: '8',
    #       anchorIgnoreIfNotPresent: 'true',
    #       documentId: '1',
    #       pageNumber: '1',
    #       recipientId: '1'
    #     }
    #   ]
    # }
    #
    # The response returns the success or failure of each document being added
    # to the envelope and the envelope ID. Failed operations on array elements
    # will add the "errorDetails" structure containing an error code and message.
    # If "errorDetails" is null, then the operation was successful for that item.
    def add_recipient_tabs(options={})
      content_type = {'Content-Type' => 'application/json'}
      content_type.merge(options[:headers]) if options[:headers]

      uri = build_uri("/accounts/#{@acct_id}/envelopes/#{options[:envelope_id]}/recipients/#{options[:recipient_id]}/tabs")
      tabs = options[:tabs]
      index = options[:recipient_id] -  1

      post_body = {
        approveTabs:          nil,
        checkboxTabs:         nil,
        companyTabs:          nil,
        dateSignedTabs:       get_tabs(tabs[:date_signed_tabs], options, index),
        dateTabs:             nil,
        declineTabs:          nil,
        emailTabs:            nil,
        envelopeIdTabs:       nil,
        fullNameTabs:         nil,
        listTabs:             nil,
        noteTabs:             nil,
        numberTabs:           nil,
        radioGroupTabs:       nil,
        initialHereTabs:      get_tabs(tabs[:initial_here_tabs], options.merge!(initial_here_tab: true), index),
        signHereTabs:         get_tabs(tabs[:sign_here_tabs], options.merge!(sign_here_tab: true), index),
        signerAttachmentTabs: nil,
        ssnTabs:              nil,
        textTabs:             get_tabs(tabs[:text_tabs], options, index),
        titleTabs:            nil,
        zipTabs:              nil
      }.to_json

      http = initialize_net_http_ssl(uri)
      request = Net::HTTP::Post.new(uri.request_uri, headers(content_type))
      request.body = post_body

      response = http.request(request)
      generate_log(request, response, uri)
      JSON.parse(response.body)
    end

    # Public method - Creates Signing group
    # group_name: The display name for the signing group. This can be a maximum of 100 characters.
    # users: An array of group members for the signing group. (see example below)
    #        It is composed of two elements:
    #        name – The name for the group member. This can be a maximum of 100 characters.
    #        email – The email address for the group member. This can be a maximum of 100 characters.
    # [
    #   {name: 'test1', email: 'test1@ygrene.us'}
    #   {name: 'test2', email: 'test2@ygrene.us'}
    # ]
    #
    #
    # The response returns a success or failure with any error messages.
    # For successes DocuSign generates a signingGroupId for each group, which is included in the response.
    # The response also includes information about when the group was created and modified,
    # including the account user that created and modified the group.
    def create_signing_group(options={})
      content_type = { 'Content-Type' => 'application/json' }
      content_type.merge(options[:headers]) if options[:headers]

      group_users = []
      if options[:users]
        options[:users].each do |user|
          group_users << {
            userName: user[:name],
            email: user[:email]
          }
        end
      end

      post_body = {
          groups: [
            {
              groupName: options[:group_name],
              groupType: 'sharedSigningGroup',
              users: group_users
            }
          ]
        }.to_json

      uri = build_uri("/accounts/#{@acct_id}/signing_groups")

      http = initialize_net_http_ssl(uri)

      request = Net::HTTP::Post.new(uri.request_uri, headers(content_type))
      request.body = post_body

      response = http.request(request)

      JSON.parse(response.body)
    end

    # Public method - deletes a signing group
    # See https://docs.docusign.com/esign/restapi/SigningGroups/SigningGroups/delete/
    #
    # signingGroupId - ID of the signing group to delete
    #
    # Returns the success or failure of each group being deleted. Failed operations on array elements will add the "errorDetails"
    # structure containing an error code and message. If "errorDetails" is null, then
    # the operation was successful for that item.
    def delete_signing_groups(options={})
      content_type = {'Content-Type' => 'application/json'}
      content_type.merge!(options[:headers]) if options[:headers]

      uri = build_uri("/accounts/#{@acct_id}/signing_groups")

      groups = options[:groups]
      groups.each{|h| h[:signingGroupId] = h.delete(:signing_group_id) if h.key?(:signing_group_id)}
      post_body = {
        groups: groups
      }.to_json

      http = initialize_net_http_ssl(uri)
      request = Net::HTTP::Delete.new(uri.request_uri, headers(content_type))
      request.body = post_body

      response = http.request(request)
      JSON.parse(response.body)
    end

    # Public method - updates signing group users
    # See https://docs.docusign.com/esign/restapi/SigningGroups/SigningGroupUsers/update/
    #
    # signingGroupId - ID of the signing group to update
    #
    # Returns the success or failure of each user being updated. Failed operations on array elements will add the "errorDetails"
    # structure containing an error code and message. If "errorDetails" is null, then
    # the operation was successful for that item.
    def update_signing_group_users(options={})
      content_type = {'Content-Type' => 'application/json'}
      content_type.merge!(options[:headers]) if options[:headers]

      uri = build_uri("/accounts/#{@acct_id}/signing_groups/#{options[:signing_group_id]}/users")

      users = options[:users]
      users.each do |user|
       user[:userName] = user.delete(:user_name) if user.key?(:user_name)
      end
      post_body = {
        users: users
      }.to_json

      http = initialize_net_http_ssl(uri)
      request = Net::HTTP::Put.new(uri.request_uri, headers(content_type))
      request.body = post_body

      response = http.request(request)
      JSON.parse(response.body)
    end

    # Public: Retrieves a list of available signing groups
    def get_signing_groups
      uri = build_uri("/accounts/#{@acct_id}/signing_groups")

      http = initialize_net_http_ssl(uri)
      request = Net::HTTP::Get.new(uri.request_uri, headers({ 'Content-Type' => 'application/json' }))
      JSON.parse(http.request(request).body)
    end

    # Public: Update envelope recipients
    def update_envelope_recipients(options={})
      content_type = {'Content-Type' => 'application/json'}
      content_type.merge(options[:headers]) if options[:headers]

      resend = options[:resend].present?
      uri = build_uri("/accounts/#{@acct_id}/envelopes/#{options[:envelope_id]}/recipients?resend_envelope=#{resend}")

      signers = options[:signers]
      signers.each do |signer|
       signer[:recipientId] = signer.delete(:recipient_id) if signer.key?(:recipient_id)
       signer[:clientUserId] = signer.delete(:client_user_id) if signer.key?(:client_user_id)
      end
      post_body = {
        signers: signers
      }.to_json

      http = initialize_net_http_ssl(uri)
      request = Net::HTTP::Put.new(uri.request_uri, headers(content_type))
      request.body = post_body

      response = http.request(request)
      JSON.parse(response.body)
    end

    # Public: Add recipients to envelope
    def add_envelope_recipients(options={})
      content_type = {'Content-Type' => 'application/json'}
      content_type.merge(options[:headers]) if options[:headers]

      uri = build_uri("/accounts/#{@acct_id}/envelopes/#{options[:envelope_id]}/recipients?resend_envelope=true")

      post_body = {
        signers: get_signers(options[:signers])
      }.to_json

      http = initialize_net_http_ssl(uri)
      request = Net::HTTP::Post.new(uri.request_uri, headers(content_type))
      request.body = post_body

      response = http.request(request)
      JSON.parse(response.body)
    end

    # Public method - get list of users
    # See https://developers.docusign.com/esign-rest-api/reference/Users
    #
    # Returns a list of users
    def get_users_list(options={})
      content_type = {'Content-Type' => 'application/json'}
      content_type.merge!(options[:headers]) if options[:headers]

      uri = build_uri("/accounts/#{@acct_id}/users?additional_info=true")

      request = Net::HTTP::Get.new(uri.request_uri, headers(options[:headers]))
      http = initialize_net_http_ssl(uri)
      response = http.request(request)
      generate_log(request, response, uri)

      parsed_response = JSON.parse(response.body)
      (parsed_response || {}).fetch("users", [])
    end

    private

    # Private: Generates a standardized log of the request and response pair
    # to and from DocuSign for logging and API Certification.
    # and resulting list is set to the publicly accessible: @previous_call_log
    # For example:
    # envelope = connection.create_envelope_from_document(doc)
    # connection.previous_call_log.each {|line| logger.debug line }
    def generate_log(request, response, uri)
      log = ['--DocuSign REQUEST--']
      log << "#{request.method} #{uri.to_s}"
      request.each_capitalized{ |k,v| log << "#{k}: #{v.gsub(/(?<="Password":")(.+?)(?=")/, '[FILTERED]')}" }
      # Trims out the actual binary file to reduce log size
      if request.body
        request_body = begin
          request.body.gsub(/(?<=Content-Transfer-Encoding: binary).+?(?=-------------RubyMultipartPost)/m, "\n[BINARY BLOB]\n")
        rescue ArgumentError => ae
          if ae.message == "invalid byte sequence in UTF-8"
            request.body.encode('UTF-8', 'binary', invalid: :replace, undef: :replace, replace: '').gsub(/^%PDF.*%%EOF/m, "\n[PDF BLOB]\n")
          else
            raise
          end
        end
        log << "Body: #{request_body}"
      end
      log << '--DocuSign RESPONSE--'
      log << "HTTP/#{response.http_version} #{response.code} #{response.msg}"
      response.each_capitalized{ |k,v| log << "#{k}: #{v}" }
      log << "Body: #{response.body}"
      @previous_call_log = log
    end

    def get_id_check_information_input(input)
      {
        addressInformationInput: get_address_information_input(
          input.dig(:address_information_input, :address_information)),
        ssn4InformationInput: get_ssn4_information_input(input[:ssn4_information_input]),
        dobInformationInput: get_dob_information_input(input[:dob_information_input])
      }
    end

    def get_address_information_input(input)
      return {} unless input
      {
        addressInformation:{
          street1: input[:street1],
          city: input[:city],
          state: input[:state],
          zip: input[:zip],
          zipPlus4: input[:zip_plus4],
        },
        displayLevelCode: 'DoNotDisplay',
        receiveInResponse: true,
      }
    end

    def get_phone_authentication(input)
      return {} unless input
      {
        recipMayProvideNumber: true,
        validateRecipProvidedNumber: true,
        recordVoicePrint: true,
        senderProvidedNumbers: input[:sender_provided_numbers],
      }
    end

    def get_ssn4_information_input(input)
      return {} unless input
      {
        ssn4: input[:ssn4],
        displayLevelCode: 'DoNotDisplay',
        receiveInResponse: true,
      }
    end

    def get_dob_information_input(input)
      return {} unless input
      {
        dateOfBirth: input[:date_of_birth],
        displayLevelCode: 'DoNotDisplay',
        receiveInResponse: true,
      }
    end

    def get_email_settings(input)
      return {} unless input
      {
        bccEmailAddresses: input[:bcc_email_addresses],
        replyEmailAddressOverride: input[:reply_to_email],
        replyEmailNameOverride: input[:reply_to_name]
      }
    end
  end
end